Trailing-Edge
-
PDP-10 Archives
-
ALGOL-20_1-29-82
-
algol-documentation/algol.bwr
There are 4 other files named algol.bwr in the archive. Click here to see a list.
ALG310.BWR
January 1982
COPYRIGHT (C) 1974,1981,1982 BY
DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
TRANSFERRED.
THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
CORPORATION.
DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
Page 2
This file contains last minute information and warnings relevant
to the ALGOL 10B/1.2(310) release. Critical bug fixes discovered
since the software and the DOC file were submitted for distribution
are listed here. In addition, this file also contains bugs fixes to
other products that directly affect the usage/building of this version
of ALGOL. This file serves as additional information to ALGOL.DOC,
which should be referenced for full information concerning this
release.
[SYMPTOM]
The ALGOL OTS and debugger (ALG310) will not function properly
when protected execute-only on a KI10. This is due to a deficiency in
the KI processor, such that when an XCT instruction is executed from a
concealed area, and the instruction being executed is in a public
area, a memory protection violation is produced. This occurs even if
the public area is not actually entered, and regardless of whether or
not the XCT is followed by a PORTAL. Refer to the
DECsystem-10/DECSYSTEM-20 Processor Reference Manual, AA-H391A-TK,
Section 2.9, page 2-63, footnote 18.
[CURE]
In all cases where the OTS and ALGDDT would do such a XCT
instruction, move the XCT and an appropriate JRST to the high seg into
the low seg (either on the stack, on in the program data base), and
jump to do the XCT completely in the low seg. The JRST to the high
seg will re-enter the concealed area at an appropriate PORTAL. The
following code is provided only as a workaround for this KI hardware
deficiency, and will not appear in any version of the ALGOL product.
It is applicable to edit level 310, and has been given minimal testing
on a KI10 while protected execute-only (protection <666>).
[FILCOM]
File 1) A1:ALGOTS.MAC[4,664] created: 1329 22-Dec-1981
File 2) DSK:ALGOTS.MAC[4,53] created: 1402 08-Jan-1982
1)39 XCT @A5 ; EVALUATE FORMAL OR THUNK
1) PORTAL .+1 ; [303]
1) RPOP DL ; RESTORE DL
****
2)39 ;**;[KIEXO] @ DEXP14 + 11L, Replace 2 lines, 8-Jan-82
2) PUSH SP,[XCT @A5] ;[KIEXO] FOR THUNK
2) PUSH SP,[JRST .+2] ;[KIEXO] BACK
2) JRST -1(SP) ;[KIEXO] EVAL FORMAL OR THUNK
2) PORTAL .+1 ;[KIEXO] ALLOW RETURN
2) SUB SP,[2,,2] ;[KIEXO] TIDY STACK
2) RPOP DL ; RESTORE DL
**************
1)40 XCT (AX) ; NO - GET VALUE OF FORMAL
1) PORTAL .+1 ; [303]
1) RPOP DL ; RESTORE CURRENT DL
****
Page 3
2)40 ;**;[KIEXO] @ FSVRC0 + 10L, replace 2 lines, 8-Jan-82
2) PUSH SP,[XCT (AX)] ;[KIEXO] FOR VALUE
2) PUSH SP,[JRST .+2] ;[KIEXO] FOR RETURN
2) JRST -1(SP) ;[KIEXO] GET VALUE OF FORMAL
2) PORTAL .+1 ;[KIEXO] ALLOW RETURN
2) SUB SP,[2,,2] ;[KIEXO] TIDY STACK
2) RPOP DL ; RESTORE CURRENT DL
**************
1)40 FSVRCA: XCTA (AX) ; GET ADDRESS OF FORMAL
1) PORTAL .+1 ; [303]
1) RPOP DL ; RESTORE CURRENT DL
****
2)40 ;**;[KIEXO] @ FSVRCA + 0L, replace 2 lines, 8-Jan-82
2) FSVRCA: PUSH SP,[XCTA (AX)] ;[KIEXO] FOR VALUE
2) PUSH SP,[JRST .+2] ;[KIEXO] FOR RETURN
2) JRST -1(SP) ;[KIEXO] GET VALUE OF FORMAL
2) PORTAL .+1 ;[KIEXO] ALLOW RETURN
2) SUB SP,[2,,2] ;[KIEXO] TIDY STACK
2) RPOP DL ; RESTORE CURRENT DL
**************
1)40 XCT 1(AX) ; STORE RESULT IN FORMAL
1) PORTAL .+1 ; [303]
1) RPOP DL ; RESTORE CURRENT DL
****
2)40 ;**;[KIEXO] @ FSVRDC + 6L, replace 2 lines, 8-Jan-82
2) PUSH SP,[XCT 1(AX)] ;[KIEXO] FOR RESULT
2) PUSH SP,[JRST .+2] ;[KIEXO] FOR RETURN
2) JRST -1(SP) ;[KIEXO] STORE RESULT IN FORMAL
2) PORTAL .+1 ;[KIEXO] ALLOW RETURN
2) SUB SP,[2,,2] ;[KIEXO] TIDY STACK
2) RPOP DL ; RESTORE CURRENT DL
**************
1)56 XCT (AX) ; [E053] GET VALUE OF FORMAL
1) PORTAL .+1 ; [303]
1) RPOP DL ; [E053] RESTORE CURRENT DL
****
2)56 ;**;[KIEXO] @ FLABF0 + 12L, replace 2 lines, 8-Jan-82
2) PUSH SP,[XCT (AX)] ;[KIEXO] FOR VALUE
2) PUSH SP,[JRST .+2] ;[KIEXO] FOR RETURN
2) JRST -1(SP) ;[KIEXO] GET VALUE OF FORMAL
2) PORTAL .+1 ;[KIEXO] ALLOW RETURN
2) SUB SP,[2,,2] ;[KIEXO] TIDY STACK
2) RPOP DL ; [E053] RESTORE CURRENT DL
**************
1)170 MOVE A3,%SYS16(DB) ; AND A3
1) XCT %SYS17(DB)
1) XCT %SYS15(DB) ; EXECUTE ORDERS
1) JRSTF @.JBTPC ; AND RETURN
****
2)170 ;**;[KIEXO] @ APR4 + 4L, Replace 3 lines, 8-Jan-82
2) MOVE A3,%SYS17(DB) ;[KIEXO] GET FIRST ORDER
2) MOVEM A3,%SYS14(DB) ;[KIEXO] PUT BEFORE SECOND
2) MOVE A3,[JRST .+3] ;[KIEXO] TO GET BACK
2) EXCH A3,%SYS16(DB) ;[KIEXO] RELOAD A3, PLANT RETURN
2) JRST %SYS14(DB) ;[KIEXO] EXECUTE ORDERS
Page 4
2) PORTAL .+1 ;[KIEXO] ALLOW RETURN
2) JRSTF @.JBTPC ; AND RETURN
**************
[FILCOM]
File 1) A1:ALGDDT.MAC[4,664] created: 1537 10-Nov-1981
File 2) DSK:ALGDDT.MAC[4,53] created: 1322 08-Jan-1982
1)26 XCT (AX) ; CALL OTS ROUTINE TO EVALUATE FORMAL
1) SUB SP,[3,,3] ; TIDY UP THE STACK
1) JRST DDGOT5 ; GO JOIN COMMON CODE
****
2)26 ;**;[KIEXO] @ DDGOT2 + 12L, Replace 2 lines, 8-Jan-82
2) PUSH SP,[XCT (AX)] ;[KIEXO] CALL TO OTS TO EVAL FORMAL
2) PUSH SP,[JRST .+2] ;[KIEXO] WAY TO GET BACK
2) JRST -1(SP) ;[KIEXO] EVALUATE
2) SUB SP,[5,,5] ;[KIEXO] TIDY UP THE STACK
2) JRST DDGOT5 ; GO JOIN COMMON CODE
**************
1)51 XCTA (A3) ; PUT - GET ADDRESS TO A2 F[0]
1) PORTAL .+1 ; [303]
1) POP SP,A1 ; RESCUE VALUE.
1) POP SP,A0
1) XCT 1(A3) ; PUT VALUE F[1]
1) PORTAL .+1 ; [303]
1) JRST CPOPJ1 ; DONE
****
2)51 ;**;[KIEXO] @ DDGT4 + 3L, Replace 2 lines, 8-Jan-82
2) PUSH SP,[XCTA (A3)] ;[KIEXO] SETUP FOR THUNK
2) PUSH SP,[JRST .+2] ;[KIEXO] WAY BACK
2) JRST -1(SP) ;[KIEXO] PUT - GET ADDR TO A2 F[0]
2) PORTAL .+1 ;[KIEXO] ALLOW RETURN
2) SUB SP,[2,,2] ;[KIEXO] TIDY STACK
2) POP SP,A1 ; RESCUE VALUE.
2) POP SP,A0
2) ;**;[KIEXO] @ DDGT4 + 7L, Replace 2 lines, 8-Jan-82
2) PUSH SP,[XCT 1(A3)] ;[KIEXO] SETUP FOR THUNK
2) PUSH SP,[JRST .+2] ;[KIEXO] WAY BACK
2) JRST -1(SP) ;[KIEXO] PUT VALUE F[1]
2) PORTAL .+1 ;[KIEXO] ALLOW RETURN
2) SUB SP,[2,,2] ;[KIEXO] TIDY STACK
2) JRST CPOPJ1 ; DONE
**************
[End FILCOMs]
[SYMPTOM]
If a program contains a macro with the same name as the tag for
the starting address, no start block is generated. When assembling
one of the ALGOL source modules (using MACRO with edit 1155 installed)
that uses this code sequence, a bad .REL file will be produced which
will cause LINK to Ill Mem Ref. This occurs because the MACRO END
Page 5
psuedo-op code incorrectly determines that the starting address is
located in other than the current Psect, causing an incorrect
inter-Psect Polish block to be generated instead of a start address.
[CURE]
Only use the right halfword of the current Psect for comparisons.
This patch is only applicable if edit 1155 has been installed to field
image MACRO 53A(1152).
[FILCOM]
File 1) DSK:MC1204.MAC[4,113] created: 1608 03-Oct-1980
File 2) DSK:MC1205.MAC[4,113] created: 1517 03-Oct-1980
1)1 TITLE MACRO %53B(1204) 2-Oct-80
1) SUBTTL EDIT BY MCHC/JBC/EGM/MFB/PY
****
2)1 TITLE MACRO %53B(1205) 3-Oct-1980
2) SUBTTL EDIT BY MCHC/JBC/EGM/MFB/PY
**************
1)1 VEDIT==1204 ;EDIT NUMBER
1) VCUSTOM==0 ;NON-DEC UPDATE LEVEL
****
2)1 VEDIT==1205 ;EDIT NUMBER
2) VCUSTOM==0 ;NON-DEC UPDATE LEVEL
**************
1)4 ;*****End of Revision History*****
****
2)4 ;1205 PY 3-Oct-80 SPR 10-30043
2) ; If processing the END statement, and the start address l
abel
2) ; has the same name as a macro, do not incorrectly set the
2) ; inter-PSECT reference bit. Broken by Edit 1155.
2) ;*****End of Revision History*****
**************
1)36 MOVE SX,SGNCUR ;[1155] GET CURRENT PSECT NUMBER
1) CAMN SX,SGWFND ;[1155] SYMBOL FOUND IN CURRENT
PSECT?
****
2)36 ;**;[1205] Replace 1 Line at EVAS3+7L PY 3-Oct-80
2) HRRZ SX,SGNCUR ;[1205] GET CURRENT PSECT NUMBER
2) CAMN SX,SGWFND ;[1155] SYMBOL FOUND IN CURRENT
PSECT?
**************
[End FILCOM]
[SYMPTOM]
If FORTRAN subroutines are loaded with an ALGOL main program,
FORLIB (version 6 only) code will be loaded into the high segment.
This happens because LINK does not check where the code should go if
Page 6
loading FORLIB unless the main program is FORTRAN.
[CURE]
Test to see whether there is a high segment. If there is not,
and the /OTSEGMENT:NONSHAR has not been given, load FORLIB in the low
segment. Note that the tag offsets (which apply to field image LINK
4A(1220)) are slightly different if edit 1225 has been installed.
[FILCOM]
File 1) DSKC:LNKHST.MAC[30,4507] created: 2209 04-Sep-80
File 2) DSKC:LNKHST.MAC[30,5526] created: 0846 08-Oct-80
1)1 SUBTTL D.M.NIXON/DMN/JLd/RKH/JBC/JNG/DCE/MCHC/PAH/DZN/PY/MFB
4-Sep-80
1)
****
2)1 SUBTTL D.M.NIXON/DMN/JLd/RKH/JBC/JNG/DCE/MCHC/PAH/DZN/PY/MFB
7-Oct-80
2)
**************
1)1 DECEVR==1220 ;DEC EDIT VERSION
1)
****
2)1 DECEVR==1271 ;DEC EDIT VERSION
2)
**************
1)5
****
2)5 ;1271 PY 7-Oct-80
2) ; Make FORLIB load into the low segment by default if the
main
2) ; program is not a FORTRAN program.
2) ; Routine: LNKLOD
2)
2)
**************
[FILCOM]
File 1) DSKC:LNKLOD.MAC[30,4507] created: 1945 10-Aug-80
File 2) DSKC:LNKLOD.MAC[30,5526] created: 0853 08-Oct-80
1)1 SUBTTL D.M.NIXON/DMN/JLd/JBC/RKH/JNG/DCE/MCHC/DZN/PY 10-Aug-8
0
1)
****
2)1 SUBTTL D.M.NIXON/DMN/JLd/JBC/RKH/JNG/DCE/MCHC/DZN/PY 7-Oct-80
2)
**************
1)1 DECEVR==1220 ;DEC EDIT VERSION
1)
****
2)1 DECEVR==1271 ;DEC EDIT VERSION
2)
Page 7
**************
1)6
****
2)6 ;1271 Cause FORLIB to load /SEG:LOW if main program is not FOR
TRAN.
2)
**************
1)92 JRST FOR.L1 ;NO
1) MOVX W1,PT.SGN!PT.SYM
****
2)92 ;**;[1271] Replace 1 Line at FORL01+2 Lines PY 7-Oct-80
2) ;**;[1271] ***** at FORL01+3 lines if edit 1225 is installed
2) JRST FORL03 ;[1271] NO
2) MOVX W1,PT.SGN!PT.SYM
**************
1)92 PUSHJ P,FOR.L1 ;[1200] PUT FORLIB IN LIST OF LI
BRARIES
1) ; ..
****
2)92 ;**;[1271] Replace 1 Line at FORL01+7 Lines PY 7-Oct-80
2) ;**;[1271] ***** at FORL01+9 lines if edit 1225 is installed
2) PUSHJ P,FORL03 ;[1271] PUT FORLIB IN LIST OF LI
BRARIES
2) ; ..
**************
1)93 MOVE P2,F.NXZR ;[1200] LAST LIBRARY PUT ON LIST
1) CAMN P1,F.NAME(P2) ;[1200] WAS IT FORLIB?
****
2)93 ;**;[1271] Replace 1 Line at FORL01+13 Lines PY 7-Oct-80
2) ;**;[1271] ***** at FORL01+14 lines if edit 1225 is installed
2) FORL04: MOVE P2,F.NXZR ;[1271] LAST LIBRARY PUT ON LIST
2) CAMN P1,F.NAME(P2) ;[1200] WAS IT FORLIB?
**************
1)93
1) FOR.L1: SKIPL FORLIB ;TEST FOR USER SCREW-UP
1) JRST FORL10 ;NO
****
2)93 ;**;[1271] Replace at FOR.L1 PY 7-Oct-80
2) FOR.L1: PUSHJ P,FORL03 ;[1271] LOAD THE LIBRARY
2) SKIPE T1,OTSEG ;[1271] GET THE /OTS: SWITCH
2) CAIE T1,1 ;[1271] /OTS:NONSHAR?
2) SKIPE HL.S2 ;[1271] NO - HIGH SEG EXIST?
2) POPJ P, ;[1271] LEAVE IT TWOSEG
2) PJRST FORL04 ;[1271] MAKE IT /SEG:LOW
2) FORL03: SKIPL FORLIB ;[1271] TEST FOR USER SCREW-UP
2) JRST FORL10 ;NO
**************
[End FILCOMs]
[SYMPTOM]
Page 8
LINK does not know about the ALGOL debugger, ALGDDT.
[CURE]
Implement /DEBUG:ALGOL, and teach LINK about ALGDDT. This patch
changes LNKPAR, therefore all modules of LINK should be recompiled.
Note that this edit can be installed directly into version 4A(1220) of
LINK.
[FILCOM]
File 1) DSKC:LNKHST.MAC[30,4507] created: 1836 31-Aug-80
File 2) DSKC:LNKHST.MAC[30,5526] created: 1938 31-Aug-80
1)1 DECEVR==1266 ;DEC EDIT VERSION
1)
****
2)1 DECEVR==1267 ;DEC EDIT VERSION
2)
**************
1)5
****
2)5 ;1267 PY 31-Aug-80
2) ; Teach LINK about /DEBUG:ALGOL and about ALGDDT.
2) ; Routines: LNKPAR, LNKWLD, LNKXIT
2)
2)
**************
[FILCOM]
File 1) DSKC:LNKPAR.MAC[30,4507] created: 1500 10-Jul-80
File 2) DSKC:LNKPAR.MAC[30,5526] created: 1943 31-Aug-80
1)1 DECEVR==1264 ;DEC EDIT VERSION
1)
****
2)1 DECEVR==1267 ;DEC EDIT VERSION
2)
**************
1)5
****
2)5 ;1267 Add ALGOL and ALGDDT to list of debuggers in DEB macro.
2)
**************
1)37 KEYMAC DEB,<,MACRO,DDT,*FORTRAN,FORDDT,*COBOL,COBDDT,SAIL,SDDT^
_
1) ,FAIL,SDDT,SIMULA,SIMDDT>
1) >
1) IFN FTMANTIS,<
1) KEYMAC DEB,<,MACRO,DDT,*FORTRAN,MANTIS,*COBOL,COBDDT,SAIL,SDDT^
_
1) ,FAIL,SDDT,SIMULA,SIMDDT>
1) >
****
2)37 ;**;[1267] Replace KEYMAC DEB in IFE FTMANTIS PY
Page 9
31-Aug-80
2) KEYMAC DEB,<,MACRO,DDT,*FORTRAN,FORDDT,*COBOL,COBDDT,SAIL,SDDT^
_
2) ,FAIL,SDDT,SIMULA,SIMDDT,ALGOL,ALGDDT> ;[1267] ADD ALGO
L AND ALGDDT
2) >
2) IFN FTMANTIS,<
2) ;**;[1267] Replace KEYMAC DEB in IFN FTMANTIS PY
31-Aug-80
2) KEYMAC DEB,<,MACRO,DDT,*FORTRAN,MANTIS,*COBOL,COBDDT,SAIL,SDDT^
_
2) ,FAIL,SDDT,SIMULA,SIMDDT,ALGOL,ALGDDT> ;[1267] ADD ALGO
L AND ALGDDT
2) >
**************
[FILCOM]
File 1) DSKC:LNKWLD.MAC[30,4507] created: 0906 27-May-80
File 2) DSKC:LNKWLD.MAC[30,5526] created: 1957 31-Aug-80
1)1 SUBTTL D.M.NIXON/DMN/JLd/SRM/JBC/JNG/MCHC/PAH/DZN/PY 23-May-8
0
1)
****
2)1 SUBTTL D.M.NIXON/DMN/JLd/SRM/JBC/JNG/MCHC/PAH/DZN/PY 31-Aug-8
0
2)
**************
1)1 DECEVR==1255 ;DEC EDIT VERSION
1)
****
2)1 DECEVR==1267 ;DEC EDIT VERSION
2)
**************
1)6
****
2)6 ;1267 Teach /DEBUG and /TEST switches about ALGDDT.
2)
**************
1)23 JRST LNKWLD ;AND TRY AGAIN
****
2)23 ;**;[1267] Insert 5 lines before SPCDDT-1L PY 31-Aug-8
0
2) CAME T1,['ALGDDT'] ;[1267] CHECK FOR ALGDDT
2) JRST LNKWLD ;[1267] NOT ALGDDT
2) SETOM NULSPC ;[1267] IT'S ALGDDT - DONT LOAD
ANYTHING
2) SETZM F.NAME(P1) ;[1267] SINCE ALGDDT IS PART OF
ALGOTS
2) TRO FL,L.SYM ;[1267] TURN ON SYMBOLS
2) JRST LNKWLD ;AND TRY AGAIN
**************
[FILCOM]
File 1) DSKC:LNKXIT.MAC[30,4507] created: 0901 06-Jun-80
Page 10
File 2) DSKC:LNKXIT.MAC[30,5526] created: 1953 31-Aug-80
1)1 SUBTTL D.M.NIXON/DMN/JLd/RKH/JBC/JNG/MCHC/DZN/MFB/PY 5-Jun-80
1)
****
2)1 SUBTTL D.M.NIXON/DMN/JLd/RKH/JBC/JNG/MCHC/DZN/MFB/PY 31-Aug-8
0
2)
**************
1)1 DECEVR==1261 ;DEC EDIT VERSION
1)
****
2)1 DECEVR==1267 ;DEC EDIT VERSION
2)
**************
1)6
****
2)6 ;1267 Add ALGDDT to KEYMAC definition.
2)
**************
1)43 IFE %%2,< ;;[1144] IF IT WASN'T AB
OVE DEBUGGERS
****
2)43 ;;**;[1267] Insert at KEYMAC(A,B) Definition +22L PY
31-Aug-80
2) IFIDN <B><ALGDDT>,< ;;[1267] ALGDDT IS SPECI
AL
2) .JBREN(P1) ;[1267] ALGDDT STARTS FROM REENT
ER ADDRESS
2) %%2==1 ;;[1267] REMEMBER WE FOU
ND A DEBUGGER
2) >
2) IFE %%2,< ;;[1144] IF IT WASN'T AB
OVE DEBUGGERS
**************
[End FILCOMs]
[SYMPTOM]
LINK produces %LNKSFU symbol table errors when loading an ALGOL
program in a small amount of memory or with a small /MAXCORE setting.
This happens because if LINK has insufficient memory to keep all
tables in memory, the ALGOL symbols are the first thing to be paged
out to an overflow file. When this happens, LINK removes the entire
ALGOL symbols area from memory. Later, when the ALGOL symbols area is
to be expanded, LINK does not check to see if there are symbols in
memory, and attempts to move the memory resident area with the
exchange pages PAGE. UUO. Since there are no ALGOL symbols to
exchange, a page from the next area higher, the local symbols area, is
exchanged with a page of zeros.
[CURE]
Page 11
Do not exchange pages if the area being expanded has been
entirely paged to disk.
[FILCOM]
File 1) DSKC:LNKHST.MAC[30,4507] created: 2350 18-Jan-81
File 2) DSKC:LNKHST.MAC[30,5526] created: 1755 28-Jan-81
1)1 SUBTTL D.M.NIXON/DMN/JLd/RKH/JBC/JNG/DCE/MCHC/PAH/DZN/PY/MFB
19-Jan-81
1)
****
2)1 SUBTTL D.M.NIXON/DMN/JLd/RKH/JBC/JNG/DCE/MCHC/PAH/DZN/PY/MFB
28-Jan-81
2)
**************
1)1 DECEVR==1274 ;DEC EDIT VERSION
1)
****
2)1 DECEVR==1275 ;DEC EDIT VERSION
2)
**************
1)6 SUBTTL THE END
****
2)5 ;1275 PY SPR 10-30508
2) ; Fix core management bug which occurs if an area has
2) ; overflowed to disk, has no pages in memory, and is
2) ; being expanded on a VM system. This happens to the
2) ; Algol symbols area if it has overflowed, causing
2) ; the first AS area page to be swapped with the first
2) ; LS area page, producing %LNKSFU errors.
2) ; Routine: LNKCOR
2)
2)
2)6 SUBTTL THE END
**************
File 1) DSKC:LNKCOR.MAC[30,4507] created: 1447 24-Jan-80
File 2) DSKC:LNKCOR.MAC[30,5526] created: 1747 28-Jan-81
1)1 SUBTTL D.M.NIXON/DMN/JLd/JBC/JNG/DZN 16-Jan-80
1)
****
2)1 SUBTTL D.M.NIXON/DMN/JLd/JBC/JNG/DZN 28-Jan-81
2)
**************
1)1 ;COPYRIGHT (C) 1973, 1980 BY DIGITAL EQUIPMENT CORPORATION
1)
****
2)1 ;COPYRIGHT (C) 1973, 1981 BY DIGITAL EQUIPMENT CORPORATION
2)
**************
1)1 DECEVR==1230 ;DEC EDIT VERSION
1)
****
2)1 DECEVR==1275 ;DEC EDIT VERSION
Page 12
2)
**************
1)3
****
2)3 ;1275 Fix core management bug when expanding a zero length are
a with PAGE.
2)
**************
1)15 JUMPL P1,MOVPG1 ;[650] MOVING UP?
****
2)15 ;**;[1275] Add 1 Line after MOVPAG+5 Lines PY 28-Jan-8
1
2) JUMPE P2,MOVPG4 ;[1275] DON'T MOVE IF AREA CONTA
INS NO PAGES
2) JUMPL P1,MOVPG1 ;[650] MOVING UP?
**************
1)15 SPOP <P3,P2,P1> ;[650] RESTORE ACS USED
1) JRST ADJTBL ;[650] GO FIXUP OTHER TAB.XX WOR
DS
****
2)15 ;**;[1275] Replace 1 Line at MOVPG#+10 Lines PY 28-Jan-8
0
2) MOVPG4: SPOP <P3,P2,P1> ;[1275] RESTORE ACS USED
2) JRST ADJTBL ;[650] GO FIXUP OTHER TAB.XX WOR
DS
**************
[End FILCOMs]