Google
 

Trailing-Edge - PDP-10 Archives - AP-4178E-RM - swskit-documentation/tops20.tco
There are 24 other files named tops20.tco in the archive. Click here to see a list.
TOPS20 Change Order Number 3A.1876

Written by: BOSACK		 8-Mar-78 17:56:18

Edit checked: NO			   Document: YES
  TCO Tested: NO		Maintenance Release: NO

Program: MONITOR
   Routines Affected:	POSTLD

Related TCO's:
Related SPR's: 


Problem: 
THE BUGCHK/HLT/INF OUTPUT FROM POSTLD DOESN'T SAY WHAT TYPE OF BUGXXX
AN ENTRY IS.

Diagnosis: 
NEW FEATURE.

Solution: 
OUTPUT [CHK/HLT/INF] AS APPROPRIATE IN THE BUGSTRINGS.TXT LISTING.
TOPS20 Change Order Number 3A.1877

Written by: BOSACK		 8-Mar-78 17:58:36

Edit checked: NO			   Document: NO
  TCO Tested: NO		Maintenance Release: NO

Program: MONITOR
   Routines Affected:	FOO

Related TCO's:
Related SPR's: 


Problem: 

Diagnosis: 

Solution: 
TOPS20 Change Order Number 3A.1878

Written by: BOSACK		20-Apr-78 13:43:41

Edit checked: NO			   Document: NO
  TCO Tested: NO		Maintenance Release: NO

Program: MONITOR
   Routines Affected:	PHYSO

Related TCO's:
Related SPR's: 


Problem: 
DUAL PORT CONTENTION COULD CAUSE XBWERR WHEN THERE WAS NO REAL ERROR.

Diagnosis: 
UDSKIO ALWAYS TESTED FOR OFFLINE DRIVES.

Solution: 
TEST DOP%EO
TOPS20 Change Order Number 3A.1882

Written by: PORCHER		 5-May-78 13:47:43

Edit checked: NO			   Document: NO
  TCO Tested: NO		Maintenance Release: NO

Program: MONITOR
   Routines Affected:	DTESRV

Related TCO's:
Related SPR's: 


Problem: I/O page fail after Front-End reload failure.

Diagnosis: DTE still has "To -10 Byte Count Loaded" flag up.  -11 can
start a To -10 transfer, after page has been removed.

Solution: Clear PI 0 enable (to prevent transfers) on any errors in
reload code (at ROMGNK).
At RMTRY1, add
	HRRZ A,RMDTE
	CALL DTREST
.
TOPS20 Change Order Number 3A.1883

Written by: OSMAN		12-May-78 12:45:57

Edit checked: NO			   Document: YES
  TCO Tested: NO		Maintenance Release: NO

Program: MONITOR

Related TCO's:
Related SPR's: 


Problem: PLEASE DOCUMENT .MSHFL

Diagnosis: 

Solution: 
TOPS20 Change Order Number 3A.1884

Written by: MCLEAN		14-May-78 14:17:51

Edit checked: NO			   Document: YES
  TCO Tested: NO		Maintenance Release: NO

Program: MONITOR
   Routines Affected:	GTJFN

Related TCO's:
Related SPR's: 	 11294


Problem: JSB FULL AND RECOGNITION WRONG IF USERS SPECIFIES TOO SMALL A BYTE COUNT

Diagnosis: WRONG ERROR CODE GIVEN AND PRINTED WRONG

Solution: ADD NEW ERROR CODE GJFX51. (BYTE SIZE TOO SMALL)
TOPS20 Change Order Number 3A.1885

Written by: OSMAN		15-May-78 09:33:59

Edit checked: NO			   Document: NO
  TCO Tested: NO		Maintenance Release: NO

Program: MONITOR
   Routines Affected:	NONE

Related TCO's:
Related SPR's: 


Problem: .MSHFL IDEA CANCELED

Diagnosis: 

Solution: 
TOPS20 Change Order Number 3A.1886

Written by: MILLER		15-May-78 18:20:39

Edit checked: NO			   Document: NO
  TCO Tested: NO		Maintenance Release: NO

Program: MONITOR
   Routines Affected:	STG

Related TCO's:
Related SPR's: 


Problem: Need to be able to define
the default swapping to put on a new structure independent
of the DST for the monitor.

Diagnosis: As above. By having this, structure swapping space
can be large enough to meet future needs

Solution: Add new parameter, SWDST. This is the number of swapping
pages to allocate on the structure. Is defined in STG as:
	NDG SWDST,NDST
and can be overriden in PARAMS
TOPS20 Change Order Number 3A.1887

Written by: MILLER		16-May-78 13:05:13

Edit checked: NO			   Document: YES
  TCO Tested: NO		Maintenance Release: NO

Program: MONITOR
   Routines Affected:	MEXEC

Related TCO's:
Related SPR's: 


Problem: CHECKD needs to know the default
swapping space for the monitor

Diagnosis: As above

Solution: Add enw GETTAB table, NSWPGS
TOPS20 Change Order Number 3A.1888

Written by: OSMAN		17-May-78 11:32:00

Edit checked: NO			   Document: YES
  TCO Tested: NO		Maintenance Release: NO

Program: MONITOR
   Routines Affected:	MSTR	DSKALC

Related TCO's:
Related SPR's: 


Problem: NEED CONVENIENT WAY TO MODIFY
HOMEBLOCKS

Diagnosis: 

Solution: ADD .MSHOM FUNCTION OF MSTR

THIS FUNCTION ALLOWS ENABLED WHEEL OR OPR PROGRAM TO SPECIFY WORD
OF HOMEBLOCK OF MOUNTED STRUCTURE TO BE MODIFIED, WHICH BITS SHOULD
BE MODIFIED, AND WHAT THE NEW VALUES SHOULD BE.

1/	LENGTH,,.MSHOM
2/	ARGBLK

ARGBLK:	
ARGBLK+.MSHNM/		HANDLE ON ALIAS (SUCH AS POINTER TO STRING, OR
					 DEVICE DESIGNATOR)
ARGBLK+.MSHOF/		OFFSET SPECIFYING WHICH WORD SHOULD BE CHANGED
ARGBLK+.MSHVL/		VALUE FOR NEW BITS
ARGBLK+.MSHMK/		MASK SHOWING WHICH BITS SHOULD BE CHANGED

POSSIBLE ERRORS:

MSTRX2		INSUFFICIENT PRIVS
MSTRX3		ARG BLOCK TOO SMALL
MSTX21		STRUCTURE NOT MOUNTED
BLECCCH		ANY ERRORS "MODHOM" ROUTINE RETURNS
TOPS20 Change Order Number 3A.1889

Written by: MILLER		18-May-78 12:45:02

Edit checked: NO			   Document: YES
  TCO Tested: NO		Maintenance Release: NO

Program: MONITOR
   Routines Affected:	APRSRV	JSYSA

Related TCO's:
Related SPR's: 


Problem: Need way to report all machine
status via SYSERR. Also need new monitor funcitons to enable
and disable reporting

Diagnosis: Request by F/S. Add code to APRSRV to gather machine
status block on any error. Also add new SMON and TMON functions to
enable and disable reporting

Solution: AS above
TOPS20 Change Order Number 3A.1890

Written by: PORCHER		24-May-78 12:29:29

Edit checked: NO			   Document: NO
  TCO Tested: NO		Maintenance Release: NO

Program: MONITOR
   Routines Affected:	DISC

Related TCO's:
Related SPR's: 


Problem: DUMPER does not incremental save files which
have been renamed but not modified.

Diagnosis: Rename (RNAMF) copies the BACKUP words .FBBK0 to .FBBK4 from
the source FDB to the new FDB.  These words should not be copied, but
should be zero in every new file.

Solution: Change the rename FDB mask to not copy .FBBK0 to .FBBK4.
TOPS20 Change Order Number 3A.1892

Written by: DBELL		 5-Jun-78 14:00:32

Edit checked: NO			   Document: NO
  TCO Tested: NO		Maintenance Release: NO

Program: MONITOR
   Routines Affected:	MONITOR

Related TCO's:
Related SPR's: 


Problem: 
MONPDL BUGHLTS

Diagnosis: SCHEDULAR STACK TOO SHORT IN CASE WHERE BIG BUFFER CODE
TRIES TO OUTPUT A CHARACTER TO A TERMINAL WHICH IS TLINKED TO A PTY.
CONTROLLING JOBS IS THEN WAKED AND IS MADE RUNNABLE, WHICH USES UP
THE REST OF THE STACK.

Solution: 
INCREASE NSKDP FROM 67 TO 100.  THIS MUCH INCREASE IS NOT NECESSARY