Trailing-Edge
-
PDP-10 Archives
-
AP-D543V_SB
-
comcon.mac
There are 14 other files named comcon.mac in the archive. Click here to see a list.
TITLE COMCON - COMMAND DECODER AND SAVEGET ROUTINES - V141156
SUBTTL /PFC/RCC/DAL 10 OCT 78
SEARCH F,S
$RELOC
$HIGH
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) 1973,1974,1975,1976,1977,1978 BY DIGITAL EQUIPMENT CORP., MAYNARD, MASS.
XP VCOMCN,141156
;THIS MACRO PUTS VERSION NO. IN STORAGE MAP AND GLOB
ENTRY COMCON ;ALWAYS LOAD COMCON IF LIBRARY SEARCH
COMCON::
;CALLED FROM CLOCK ROUTINE WHEN 'COMCNT' IS GREATER THAN 0
;AS SET BY TTY SERVICE ROUTINE
;ALL AC'S HAVE BEEN SAVED BY CLOCK CHANNEL
;THE COMMAND DECODER CALLS TTYCOM WHICH SCANS FOR TTY WHICH TYPED
SUBTTL TABLE OF CONTENTS
; TABLE OF CONTENTS FOR COMCON
;
;
; SECTION PAGE
; 1. TABLE OF CONTENTS......................................... 1
; 2. INTRODUCTION.............................................. 3
; 3. COMMAND SETUP AND DISPATCH................................ 5
; 4. COMMAND RETURN AND CLEANUP................................ 12
; 5. COMMAND TABLE............................................. 14
; 6. CORE 0 COMMAND............................................ 20
; 7. PJOB & KJOB COMMANDS...................................... 21
; 8. START GROUP (START,CSTART,REE,DDT)........................ 23
; 9. DUMP & DCORE COMMANDS..................................... 25
; 10. CONTROL-C PROCESSING...................................... 26
; 11. SET COMMAND AND UUO
; 11.1 DISPATCH.......................................... 29
; 11.2 JBSET............................................. 30
; 11.3 PRIVILEGE TESTS................................... 31
; 11.4 CORMAX AND CORMIN................................. 35
; 11.5 DAYTIME AND SCHED................................. 40
; 11.6 OPR, LOGMIN&MAX BATMIN&MAX........................ 41
; 11.7 WATCH............................................. 42
; 11.8 DATE.............................................. 44
; 11.9 SPOOL............................................. 45
; 11.10 DEFER/NODEFER..................................... 47
; 11.11 CDR............................................... 48
; 11.12 DISK STUFF........................................ 49
; 11.13 ROUTINE TO READ DATE.............................. 51
; 11.14 ROUTINES TO PRINT WATCH INFO...................... 53
; 12. CONTINUE, CCONT AND JCONT................................. 57
;CONTINUED ON NEXT PAGE
; 13. CORE COMMAND.............................................. 60
; 14. CONTROL-T PRINTOUT........................................ 65
; 15. SAVE, SSAVE AND GET - COMMAND SETUP....................... 70
; 16. COMMANDS WHICH RUN PROGRAMS............................... 72
; 17. ASSIGN, DEASSIGN AND REASSIGN COMMANDS.................... 75
; 18. ATTACH, DETACH AND EXCHANGE COMMANDS...................... 92
; 19. DATASET CONNECT & SYSTEM START............................ 99
; 20. DAYTIME COMMAND........................................... 100
; 21. RUNTIME ROUTINE (TIME COMMAND)............................ 101
; 22. SEND COMMAND.............................................. 102
; 23. VERSION COMMAND & PRVERS SUBROUTINE....................... 107
; 24. EXAMINE AND DEPOSIT COMMAND............................... 109
; 25. TTY COMMAND AND SET TTY COMMAND........................... 113
; 26. FINISH AND CLOSE COMMANDS................................. 123
; 27. SUBROUTINES
; 27.1 COMMAND SETUP..................................... 126
; 27.2 GET A WORD........................................ 127
; 27.3 GET CHARACTER..................................... 129
; 27.4 TYPE OUT ROUTINES................................. 130
; 28. SAVGET
; 28.1 PARAMETERS........................................ 143
; 28.2 COMMAND SCAN...................................... 144
; 28.3 RUN AND GETSEG UUO'S.............................. 147
; 28.4 SAVE A JOB........................................ 148
; 28.5 "EXE" SAVE FILES.................................. 151
; 28.6 GET AND RUN COMMANDS.............................. 177
; 28.7 RUN UUO........................................... 179
; 28.8 GETSEG UUO........................................ 182
; 28.9 COMMON CODE....................................... 183
; 28.10 GET FILE FROM DEVICE (R,RUN,GET,GETSEG)........... 186
; 28.11 IO ROUTINES....................................... 192
; 28.12 EXPAND COMPRESSED FILES........................... 195
; 28.13 SUBROUTINES....................................... 201
SUBTTL INTRODUCTION
;THE COMMAND AND THEN DISPATCHES(PUSHJ) TO APPROPRIATE
;COMMAND SETUP ROUTINE WITH AC'S SET AS:
;J = JOB NUMBER
;F = ADDRESS OF DEVICE DATA BLOCK TYPING COMMAND, IF ANY
;R = ADDRESS OF JOB'S CORE AREA, = 0 IF NO CORE
;S IS SET TO 0, USED FOR ADDRESS OF SUBSEQUENT CALLS
;U = ADDRESS OF LINE DATA BLOCK OF TTY TYPING COMMAND
;W = ADDRESS OF JOB'S PDB
;P4 = JOB STATUS WORD (C(JBTSTS(J)))
;P1 = 0 (USED FOR SAVGET FLAGS)
;P2 = COMMAND NAME (2ND NAME IF SET)
;THE PUSHDOWN LIST CONTAINS:
;LH(M) = 1B0=1B1= 1 (FLAG FOR COMMAND AT COMMAND LEVEL)
; = 1B8-17= COMMAND TABLE ENTRY
;-1 (P) = U = ADDRESS OF LDB
;THE FOLLOWING GLOBAL USAGE PREVAILS:
;T3 LAST INPUT CHARACTER
; ALSO TYPE OUT CHARACTER
;IN GENERAL, T1 - T4 AND P2 - 4 ARE SCRATCH
;AT COMMAND RETURN, IF J = 0 AND A
; JOB WAS REQUIRED, AN ERROR IS ASSUMED.
; ALL OTHER ACS CAN HAVE BEEN CHANGED
;UPON RETURN FROM COMMAND SETUP ROUTINE, A CR-LF IS ADDED TO
;MESSAGE AND TTY IS STARTED ON TTY SPECIFIED BY -1(P)
;SEVERAL COMMAND FLAGS ARE CHECKED BEFORE DISPATCHING TO
;COMMAND SETUP ROUTINES TO SEE IF COMMAND IS LEGAL AT THIS TIME
;SEVERAL MORE FLAGS ARE CHECKED UPON RETURN FROM COMMAND SETUP
;ROUTINES(UNLESS AN ERROR HAS OCCURRED) FOR STANDARD
;COMMAND RESPONSE
;IF AN ERROR OCCURS, THE JOB NO.(J) SHOULD BE 0 ON RETURN
;SO THAT JOB WILL NOT BE INITIALIZED IF FIRST COMMAND.
;ERRMES ROUTINE WILL SET J TO 0
;SINCE THE COMMAND DECODER IS CALLED FROM THE CLOCK ROUTINE
;COMMAND SETUP ROUTINE MUST RUN TO COMPLETION QUICKLY
;IF A COMMAND FUNCTION CANNOT DO THIS, IT MUST JUST SET
;THE JOB TO RUNABLE STATUS AND RETURN IMMEDIATELY
;OR DELAY THE COMMAND FOR LATER EXECUTION
;THE FOLLOWING AC USAGE PREVAILS FOR TTY IN/OUT:
;
;INPUT: U=LDB, T3=CHARACTER CLOBBERS T1
;
; CTEXT CLOBBERS W, RETURNS T2=NAME
; SKIPS RETURNS T2=0
; DEC/OCT IN CLOBBERS P4, RETURNS T2=NUMBER
; PJPGNO CLOBBERS T2,P4, RETURNS P2=USER
;
;
;OUTPUT:U=LDB, T3=CHARACTER CLOBBERS T1,S
;
; CONMES POINTER IN T1
; OCTPNT/PRTDI8/RADX10 NUMBER IN T1
; (PRTDI8 CLOBBERS T2)
; PRNAME NAME IN T2
;P1 ASSIGNMENTS:
;
;PHONLY==1B0 ;PHYSICAL ONLY
;INCREMENT==777777 ;STARTING ADDRESS OFFSET
SUBTTL COMMAND SETUP AND DISPATCH
COMMAN::PUSHJ P,TTYCOM## ;SETUP F,U,J, AND W
; FOR ANY TTY WHICH HAS TYPED A COMMAND
JRST [AOS CMNOTF## ;NONE FOUND, COUNT THE BUG
POPJ P,] ;RETURN
IFN FTMS,<
MOVEM J,COMJOB## ;TO AVOID JOBSTS UUO RACE
>
IFN FTKI10!FTKL10,<
PUSHJ P,COMUBR## ;SAVE EBR AND UBR AND SETUP UBR FOR
; THE JOB THE COMMAND IS BEING EXECUTED FOR
>
PUSH P,U ;SAVE TTY LINE DATA BLOCK ADDRESS
IFN FTCAFE&FT2741,<
MOVEI T3,377
MOVEI T1,LDR2741## ; TRUE MAGIC OF THE
TDNE T1,LDBDCH##(U) ; 2741 COMMUNICATIONS
PUSHJ P,COMTYO## ; TERMINAL
> ;END FTCAFE&FT2741
MOVEI P3,DISP ;SET P3=LOC OF DISPATCH TABLE
MOVE P4,[XWD -DISPL,COMTAB];SET P4=-LENGTH,TABLE LOC
LDB T1,LDPCMX## ;GET FORCED COMMAND INDEX, IF ANY
HRLM T1,(P) ;SAVE IT FOR COMPARISON
MOVSI T2,LDBCMF## ;IS COMMAND FORCED?
TDNE T2,0(U) ; ..
SKIPA T2,TTFCOM##(T1) ;YES. GET SIXBIT NAME OF COMMAND
COM1: PUSHJ P,CTEXT ;SCAN COMMAND NAME, RETURN IT IN T2
CAIN T3,"C"-100 ;BREAK ON CONTROL-C?
MOVE T2,HALTXT ;YES--TURN COMMAND INTO HALT
;HERE WITH T2=COMMAND, P3=DISPATCH TABLE, P4=AOBJN TABLE
COM1A: MOVE T1,P4 ;COPY POINTER
PUSHJ P,FNDNAM ;LOOK IT UP
SETOM T1 ;ERROR--SET FLAG
ADDI T1,(P4) ;COMPUTE MATCH LOCATION
MOVE P2,(T1) ;SAVE NAME OF COMMAND
IFN FTCCL,<
TLZ T1,-1 ;CLEAR JUNK
CAILE T1,COMPIL ;SEE IF COMPIL
CAIL T1,LASCCL ; ..
JRST .+2 ;NO
MOVEI T1,COMPIL ;YES
>
SUBI T1,(P4) ;INDEX OF TABLE
ADDI P3,(T1) ;POINT P3 TO DISPATCH ENTRY
SKIPGE T1 ;SEE IF ERROR
MOVEI P3,COMERD ;YES--SET DISPATCH
MOVE M,(P3) ;GET DISPATCH TABLE ENTRY
MOVE P4,JBTSTS##(J) ;JOB STATUS WORD FOR THIS JOB
IFN FTCAFE&FT2741!FTNET,<
TLNE P4,JLOG ; WHILE NOT LOGGED IN?
JRST NT2741 ;NO--LEAVE ALONE
JUMPGE T1,NT2741 ;JUMP IF NOT COMMAND ERROR
CAMN T2,[SIXBIT .YQAOS.]
HRRI M,SET987
CAMN T2,[SIXBIT .VI.];DID HE TYPE LOGIN WITH WRONG BALL?
HRRI M,SET988 ;YES--SET TTY ELEMENT 988
NT2741:> ;END FTCAFE&FT2741!FTNET
IFN FTEL&FTSWAP,<
TRNE P4,JS.DEP ;IS JOB BEING STOPPED ON ERROR SO DAEMON CAN LOG?
JRST CHKDLY ;YES, DELAY COMMAND UNTIL DAEMON IS FINISHED LOGGING
>
IFN FTLOGIN,<
TLNN P4,JLOG ;IS JOB LOGGED IN?
TLNE M,NOLOGIN ;NO, CAN COMMAND PROCEED WITH NO LOGIN?
JRST CHKNO ;YES
LOGPLS: JSP T1,COMER ;NO, TYPE "LOGIN PLEASE"
LOGPLM: ASCIZ /LOGIN please
/
>
CHKNO: SETZB P1,R ;CLEAR PHYSICAL I/O FLAG, AND CORE LOCATION
JUMPN J,CHKRUN ;JOB NUMBER ALREADY ASSIGNED?
TLNE M,NOJOBN ;NO, DOES THIS COMMAND NEED A JOB NUMBER?
JRST COMGO ;NO
MOVEI J,1 ;YES, SCAN FOR ONE STARTING WITH 1
NUMLOP: MOVE P4,JBTSTS##(J) ;SCAN FOR FREE JOB NO.
TLNN P4,JNA+CMWB+JRQ ;THIS NUMBER ASSIGNED?
JRST NEWJOB ;NO, SO USE THIS NUMBER
CAIGE J,JOBMAX## ;YES, IS THE MAX. JOB NO.?
AOJA J,NUMLOP ;NO, KEEP LOOKING
SKIPG ARFLAG## ;SYSTEM STARTING UP?
JRST CHKDLY ;YES--DELAY IT
IFN FTNET,<
MOVSI T1,LDBCMF## ;WAS THIS COMMAND FORCED?
TDNN T1,(U)
JRST NEWJER ;NO, OKAY TO COMPLAIN
MOVEI T1,LDRREM## ;IF FROM NETWORK, PROBABLY INITIA OR
TDNE T1,LDBDCH##(U) ; .NETLD SO DELAY IT
JRST CHKDLY
>
NEWJER: JSP T1,COMER ;YES, NONE LEFT, PRINT "JOB CAPACITY EXCEEDED"
ASCIZ /Job capacity exceeded
/
; EVEN THOUGH THIS IS A NEW JOB NUMBER
; IT MAY HAVE CORE ASSIGNED NOW BECAUSE IT WAS DELAYED
; UNTIL IT COULD BE SWAPPED IN(LOGIN WITH CORE FULL)
NEWJOB: SKIPE F,TTYTAB##(J) ;ANY TTY DDB?
PUSHJ P,TTYKIL## ;YES--KILL IT OFF
SETZB F,TTYTAB##(J) ;KEEP TTYATI HAPPY
MOVE U,(P) ;RESTORE U
PUSHJ P,TTYATI## ;TRY TO ATTACH TTY TO THIS JOB NUMBER
JRST NEWJER ;IF CAN'T, NO DDB'S. SAY JOB CAP EXC
IFE FTPDBS,< ;IF WE HAVE PDB'S IN CORE THIS IS A LITTLE DIFFERENT
PUSHJ P,CREPDB## ;CREATE A PDB FOR THIS JOB
JRST [PUSHJ P,TTYKIL ;KILL TTY DDB OBTAINED ABOVE
JRST NEWJER] ;CAN'T GET A PDB, SAY JOB CAP EXC
PUSHJ P,CLRJBT## ;GO CLEAR ALL THE JOB TABLES AND PDB
> ;END IN CORE CASE
IFN FTPDBS,< ;IF PDB'S SWAP
PUSHJ P,CLRJBT## ;GO CLEAR ALL THE JOB TABLES
PUSHJ P,CREPDB## ;CREATE A PDB FOR THIS JOB
JRST [PUSHJ P,TTYKIL ;KILL TTY DDB OBTAINED ABOVE
JRST NEWJER] ;CAN'T GET A PDB, SAY JOB CAP EXC
JUMPE W,PDBDLY ;IF PDB WAS CREATED ON THE DISK, WE MUST
; DELAY THIS COMMAND UNTIL IT IS IN CORE.
> ;END FTPDBS
PUSHJ P,ASICPT## ;ASSIGN IN-CORE PROTECT TO THIS JOB
MOVE T2,DATE##
MOVEM T2,JBTJLT##(J)
IFN FTTLIM,<
PUSHJ P,CTLJBU## ;GET PTY DDB IF THERE IS ONE
JUMPL T1,NEWJB1 ;JUMP IF NOT PTY CONTROLLED
MOVSI T1,DVDIBP ;GET BATCH PTY BIT
MOVSI T2,(JB.LBT) ;GET A BATCH JOB BIT
TDNE T1,DEVCHR(F) ;IS IT A BATCH PTY ?
IORM T2,JBTLIM(J) ;YES, THEN ITS A BATCH JOB
NEWJB1: HRRZ F,LDBDDB##(U) ;RESTORE TTY DDB
>
IFN FTWATCH,<
MOVE T1,TIME## ;INITIALIZE TO TIME OF DAY
TLO T1,M.WCH## ;OR IN INITIAL SET WATCH BITS
; (IN CASE THIS JOB GETS AUTOMATIC LOGIN)
MOVEM T1,JBTWCH##(J) ;STORE FOR THIS JOB
>
CAMLE J,HIGHJB## ;HIGHEST JOB NUMBER ASSIGNED?
MOVEM J,HIGHJB## ;YES,SAVE IT FOR SCHEDULER SCAN OF JOBS
IFN FTNET,<
PUSHJ P,FNDSTA## ;WHERE IS HE?
DPB T1,PDVSTA## ;THAT IS WHERE HIS TTY IS NOW
HRRZM T1,JBTLOC##(J) ;AND LOCATE HIM THERE
>
CHKRUN: TLNE P4,RUN ;RUN BIT ON IN JOB STATUS?
TLNN M,NORUN ;YES, DOES THIS COMMAND REQUIRE A JOB?
JRST CHKBAT ;NO
JSP T1,COMER ;YES.
RUNERR::ASCIZ /Please type ^C first
/
CHKBAT: IFN FTTLIM,<
MOVE T1,JBTLIM##(J) ;GET BATCH BIT
TLNE T1,(JB.LBT) ;SEE IF BATCH JOB
TLNN M,NBATCH ;YES--SEE IF ILLEGAL COMMAND
JRST CHKXO ;NO--OK TO PROCEED
JSP T1,COMER ;YES--BOMB USER
BATMSG: ASCIZ /Illegal in batch job
/
>
CHKXO:
TRNE P4,JS.XO!JS.RUU ;SEE IF EXECUTE ONLY JOB
TLNN M,NXONLY ;YES--SEE IF ILLEGAL COMMAND
JRST CHKACT ;NO--OK TO PROCEED
JSP T1,COMER ;YES--BOMB USER
ILLXOM: ASCIZ /Illegal when execute only
/
CHKACT: MOVE R,JBTADR##(J) ;XWD PROTECTION,RELOCATION
IFN FTSWAP,<
TLNE M,INCORE ;MUST JOB NOT BE SWAPPING OR
; IF JOB HAS CORE ASSIGNED, MUST IT BE
; IN PHYSICAL CORE (RATHER THAN DISK OR ON ITS WAY)
TLNN P4,SWP ;YES, IS JOB ON DISK OR ON ITS WAY?
JRST CHKCO2 ;NO
HRRI M,DLYCM ;ASSUME JOB MUST BE IN PHY CORE
; SO SET TO SWAP JOB IN
JRST COMDIS ;WAIT FOR JOB
CHKDLY: HRRI M,DLYCM1 ;NO, JUST DELAY COMMAND UNTIL SWAP OUT OR IN IS FINISHED
JRST COMDIS ;AND DISPATCH TO DELAY COMMAND
>
CHKCO2: TLNE M,NOACT ;CAN COMMAND BE PERFORMED WITH ACTIVE DEVICES?
PUSHJ P,RUNCHK ;NO, RETURN IF JOB STOPPED AND NO ACTIVE DEVICES
CHKCO1: TLNE M,NOCORE ;DOES THIS COMMAND NEED CORE?
JRST COMGO ;NO. GO DISPATCH
JUMPN R,CHKXPN ;YES, IS CORE IN MEMORY?
JSP T1,COMER ;NO, PRINT "NO CORE ASSIGNED"
ASCIZ /No core assigned
/
IFN FTPDBS,< ;CAN ONLY HAPPEN IF PDB'S SWAP
;HERE IF PDB IS NOT IN CORE YET
PDBDLY: HRRI M,DLYCM ;SET UP TO DELAY COMMAND
JRST COMDIS ;GO OFF AND WAIT
>;END IFN FTPDBS
CHKXPN: TLNN M,INCORE ;DOES THIS COMMAND NEED CORE TO BE EXPANDED?
JRST COMGO ;NO
HLRE S,JOBHCU##(R) ;YES, IS CORE STILL COMPRESSED(SAVE DID NOT GO
; TO COMPLETION)
JUMPGE S,COMGO ;LH=-2 DURING SAVE, WHEN CORE COMPRESSED
;LH=-1 DURING SAVE OF HIGH SEG, OR GET OF LOW
; OR HIGH SEG
IFN FTJCON,<
CAME P2,FCOTXT ;IS THIS A FORCED CONTINUE?
>
CAMN P2,CONTXT ; OR CONTINUE COMMAND?
JRST COMGO ;YES, DON'T EXPAND (LET SAVE FINISH)
PUSHJ P,CLRASA ;CLEAR EXEC MODE UUO FLAG
AOJGE S,COMGO ;JUMP IF DON'T NEED TO EXPAND
PUSHJ P,EXPAND ;NO, EXPAND CORE FIRST
JFCL ;IGNORE ADDRESS CHECK ERROR, WE TRIED
MOVSI T1,JERR ;SET JERR SO CONT WON'T WIN
IORM T1,JBTSTS##(J) ; (WOULD GET ADR CHK IF ATTEMPTED)
IFN FTSWAP,<
JRST CHKDLY ;DELAY COMMAND BECAUSE COMMAND DECODER ACS ARE
; ALL GONE, NEXT TIME JOBHCU WILL BE 0
>
IFE FTSWAP,<
HRRI M,DLYCM1 ;DELAY COMMAND TILL NEXT CLOCK TICK
JRST COMDIS
>
COMER: MOVSI M,NOINCK
HRRI M,ERRMES ;CALL ERROR MESSAGE ROUTINE
COMGO: TLNN P4,CMWB ; WAS JOB IN COMM WAIT
TLZ M,CMWRQ ;NO, CLEAR REQUEU BIT IN DISP. FLAGS
MOVSI S,CMWB ;CLEAR CMWB
ANDCAM S,JBTSTS##(J)
COMDIS: MOVEI S,0 ;CLEAR S FOR SETTING DISPATCH ADDRESSES
TLO M,FLMCOM!FLMCLV ;SET COMMAND AT COMMAND LEVEL FLAGS
PUSHJ P,(M) ;DISPATCH TO COMMAND
JFCL ;IGNORE ERROR RETURN
SUBTTL COMMAND RETURN AND CLEANUP
;RETURN FROM COMMAND SETUP ROUTINE
COMRET: HLRZ T1,(P) ;GET FORCED COMMAND INDEX BACK
POP P,U ;RESTORE TTY LDB ADDRESS
HRRZ F,LDBDDB##(U) ;RESTORE TTY DDB IF ANY
PUSHJ P,TTYCMR## ;TELL SCNSER COMMAND IS COMPLETED
SOS COMCNT##
AOS COMTOT## ;KEEP COUNT OF TOTAL COMMANDS PROCESSED
; (DO NOT COUNT DELAYED COMMANDS UNTIL PROCESSED)
IFN FTACCT,<
MOVSI T1,1 ;UPDATE NUMBER COMMANDS TYPED
SKIPE F
ADDM T1,DDBBCC##(F)
>
TLNN M,ERRFLG ;ERROR?
JRST COMRT1 ;NO, PROCEDE
SETZM J ;YES, CLEAR J
TLZ M,NOCRLF!NOPER!TTYRNU!TTYRNC!TTYRNW!NOMESS ;ERROR--CLEAR PROBLEM BITS
TLO M,NOINCK+CMWRQ ;YES, JOB NUMBER REQUIRED, BUT NONE IN J.
; PRINT ERROR MESSAGE ONLY, AND
; REQUEUE JOB IF NECESSARY.
COMRT1: MOVSI P4,JNA ;JOB STATUS WORD
TLNN M,NOINCK ;SUPPRESS JOB INIT. CHECK?
TDOE P4,JBTSTS##(J) ;NO, IS JOB INIT BIT ALREADY SET?
JRST PCRLFA ;YES.
MOVSI P4,JNA ;GET JNA BIT AGAIN
IORB P4,JBTSTS##(J) ;NO, SO SET IT THIS COMMAND
PUSHJ P,TTYATI## ;ATTACH TTY TO JOB
JFCL ;IGNORE IF CAN NOT(SHOULD NEVER HAPPEN)
IFE FTLOGIN, <
PUSHJ P,INLMES ;AND PRINT "JOB "
ASCIZ /Job /
MOVE T1,J ;PRINT JOB NUMBER
PUSHJ P,RADX10##
PUSHJ P,PRSPC
MOVEI T1,CONFIG## ;PRINT SYSTEM CONFIGURATION NAME
PUSHJ P,CONMES
PUSHJ P,PRSPC
PUSHJ P,DAYTIM
>
PCRLFA:
IFN FTJCON,<
MOVEI T1,JDCON ;CLEAR JDCON SO THAT A RUNNING JOB
TLNE M,TTYRNU!TTYRNC!TTYRNW ;WILL NOT BE THE "JCONT INVABLE" FROM
ANDCAM T1,JBTSTS##(J) ;ANOTHER TTY
>
IFN FTWATCH,<
TLNE M,NOMESS ;SEE IF MESSAGE SUPPRESSED
JRST PCRLF0 ;YES--SKIP WATCH
TLNE M,TTYRNU!TTYRNC!TTYRNW ;COMMAND START JOB UP (TTY IN EITHER MODE)?
PUSHJ P,WCHBEG ;YES, PRINT [HH:MM:SS] STARTED TO WAIT FOR RESPONSE
>
PCRLF0: TLNN M,NOCRLF ;SUPRESS CRLF?
PUSHJ P,CRLF ;NO
TLNN M,NOPER ;SUPRESS PRINTING PERIOD?
PUSHJ P,PRPER ;NO
JUMPE J,PCRLF1 ;JOB DOES NOT RUN IF ERROR OR NO JOB NO. ASSIGNED
TLNE M,TTYRNU ;JOB TO RUN WHEN TTY FINISHED TYPING?
; COMMAND RESPONSE (TTY TO USER MODE)?
PUSHJ P,TTYUSR## ;YES, CALL SCANNER AND SCHEDULER ROUTINES
TLNE M,TTYRNW ;COMMAND RESTART TTY RESPECTING IO WAIT?
PUSHJ P,TTYUSW## ;YES. CALL SCANNER ROUTINE AND SCHEDULER
TLNE M,TTYRNC ;NO, JOB TO RUN AND REMAIN IN MONITOR MODE?
PUSHJ P,SETRUN## ;YES, CALL SCHEDULER ROUTINE
PCRLF1: TLNN M,NOMESS ;IS THERE A MESSAGE?
PUSHJ P,TTYSTR## ;YES, START TTY TYPING IT OUT
TLNE M,ERRFLG ;WAS AN ERROR?
PUSHJ P,TSETBI## ;YES--CLEAR TYPE-AHEAD
TLNN M,NOJOBN ;WAS NO JOB NUMBER NEEDED?
TLNE M,ERRFLG ;OR DID AN ERROR OCCUR?
PUSHJ P,TTYKLQ## ;YES, KILL TTY IN CASE NO JOB LEFT
PUSHJ P,DECHJB## ;DECREMENT HIGHJB IF APPROPRIATE
IFN FTMS,<
SETOM COMJOB## ;NO JOB IN COMCON NOW
>
IFN FTSWAP, <
JUMPE F,CPOPJ## ;IF NO JOB, QUIT
LDB J,PJOBN## ;GET ATTACHED JOB # FROM TTY DDB
JUMPE J,CPOPJ##
CAME J,JOB## ;NEVER SET JRQ FOR CURRENT JOB!
TLNN M,CMWRQ ;REQUEUE JOB AFTER COMMAND WAIT OR ERROR?
POPJ P,
JRST REQUE## ;YES
>
IFE FTSWAP,<
POPJ P,
>
SUBTTL COMMAND TABLE
;BITS CHECKED BEFORE DISPATCHING TO COMMAND SETUP ROUTINE
NOCORE==1B18 ;NO CORE NEEDED FOR COMMAND
NOJOBN==1B19 ;NO JOB NUMBER NEEDED FOR COMMAND
NOLOGIN==1B35 ;JOB DOES NOT NEED TO BE ALREADY LOGGED IN.
NOACT==1B34 ;COMMAND MUST BE DELAYED IF JOB HAS ACTIVE DEVICES.
NORUN==1B33 ;AN EXPLICIT ^C MUST BE TYPED BY USER BEFORE COMMAND
; IS EXECUTED IF JOB IS RUNNING
; JOB MUST BE SWAPPED IN IF IT HAS LOGICAL CORE
INCORE==1B32 ;COMMAND MUST BE DELAYED IF JOB HAS LOGICAL CORE
; WHICH IS ON DISK OR ON ITS WAY IN OR OUT.
; JOB WILL BE SWAPPED IN (SEE DLYCOM)
; AND IS NOT SITTING QUIETLY IN CORE(IE NO SWAPPING TRANSFER)
NXONLY==1B31 ;NOT LEGAL IF EXECUTE ONLY PROGRAM
NBATCH==1B30 ;NOT LEGAL FROM BATCH JOB
;BITS PLACED IN LH(M) AND CHECKED AFTER RETURN FROM COMMAND SETUP ROUTINE
CUSTMR==1B29 ;RESERVED TO CUSTOMERS
NOINCK==1B28 ;NO CHECK FOR JOB INITIALIZATION (JNA=0)
NOCRLF==1B27 ;NO PRINTING OF CRLF
NOPER==1B26 ;NO PRINTING OF PERIOD
TTYRNU==1B25 ;SET TTY TO USER MODE AND START JOB
; WHEN COMMAND RESPONSE STOPS TYPING
TTYRNC==1B24 ;KEEP TTY IN COMMAND MODE AND START JOB
; WHEN COMMAND RESPONSE STOPS TYPING
TTYRNW==1B23 ;SET TTY TO USER LEVEL AND IO WAIT IF IT WAS IN IOW BEFORE
CMWRQ==:1B22 ;REQUEUE JOB AFTER COMMAND WAIT
NOMESS==1B21 ;NO COMMAND RESPONSE EVER, DO NOT CALL TTYSTR OR TYPE WATCH BEGIN.
NOCRLP==:NOCRLF!NOPER! ;NEEDED FOR INTERNAL
TTYRNM==:TTYRNW!NOMESS ;TTY TO USER MODE AND NO MESSAGE
ERRFLG==1B20 ;COMMAND ERROR
RUNFLG==:NOCORE!NOPER!TTYRNU!NOACT!NORUN!INCORE!NOCRLF
ECMFLG==:NOCRLF!NOPER!NOMESS!TTYRNC
;FLAG BITS IN LH(M)
FLMCOM==:1B18 ;1=COMMAND, 0=UUO
FLMCLV==1B19 ;COMMAND RUNNING AT COMMAND LEVEL
DEFINE NAMES<
C START,START,NOPER!TTYRNU!INCORE!NOACT!NORUN!NOLOGIN!NOJOBN
C .HALT,STOPF,NOCORE!NOJOBN!NOLOGIN!NOINCK!CMWRQ
C HALT,STOP,NOCORE!NOJOBN!NOLOGIN!NOINCK!CMWRQ,HALTXT
C KJOB,KJOB,NOCORE!NOJOBN!NOINCK!NOLOGIN!NOACT!NOPER!NOCRLF!NOMESS!INCORE!NORUN
C <>,CBLANK,NOCORE!NOJOBN!NOLOGIN!NOINCK!NOCRLF
C R,RCOM,NOCORE!NOPER!TTYRNU!NOACT!NORUN!INCORE
C RUN,RUNCOM,NOCORE!NOPER!TTYRNU!NOACT!NORUN!INCORE
C CORE,CORE,NOCORE!CMWRQ!INCORE!NOACT
C GET,GET,RUNFLG
C SAVE,SAVE,NOCRLF!NOPER!TTYRNU!INCORE!NOACT!NORUN!NXONLY
IFN FT2REL,<
C SSAVE,SSAVE,NOCRLF!NOPER!TTYRNU!INCORE!NOACT!NORUN!NXONLY
>
IFN FTEXE,<
C NSAVE,NSAVE,NOCRLF!NOPER!TTYRNU!INCORE!NOACT!NORUN!NXONLY
C OSAVE,SAVEO,NOCRLF!NOPER!TTYRNU!INCORE!NOACT!NORUN!NXONLY
IFN FT2REL,<
C NSSAVE,NSSAVE,NOCRLF!NOPER!TTYRNU!INCORE!NOACT!NORUN!NXONLY
C OSSAVE,SSAVE1,NOCRLF!NOPER!TTYRNU!INCORE!NOACT!NORUN!NXONLY
> ;END OF IFN FT2REL
> ;END OF IFN FTEXE
C CONTINUE,CONT,NOPER!TTYRNW!INCORE!NORUN!NOJOBN!NOLOGIN!NOINCK,CONTXT
IFN FTJCON,<
C JCONTINUE,JCONT,NOCORE!NOJOBN!NOLOGIN!NOINCK
C .FCONT,FCONT,NOPER!NOCRLF!NOMESS!NORUN!INCORE!CMWRQ!NOJOBN!NOLOGIN!NOINCK,FCOTXT
>
IFN FTEXAMINE,<
C D,DCOM,CMWRQ!INCORE!NXONLY
C E,ECOM,NOCRLF!CMWRQ!INCORE!NXONLY
>
IFE FTPJOB,<
C PJOB,PJOB,NOCORE
>
IFN FTPJOB,<
C PJOB,PJOBX,NOCORE!NOJOBN!NOLOGIN!NOINCK
>;END IFN FTPJOB
IFN FTMODM!FTNET,<
C .HELLO,HELLO,RUNFLG!NOLOGIN
C .BYE,BYECOM,NOCORE!NOLOGIN!NOJOBN!NOINCK
>
IFN FTNET,<
C ASSIGN,ASSIGN,NOCORE!INCORE!CMWRQ
C .NETLD,RUNNET,RUNFLG!NOLOGIN
C NODE,NODE.C##,INCORE!NOCORE!CMWRQ!NOPER!NOCRLF!NOLOGIN
C DEASSI,DEASSIG,NOCORE!NOINCK!INCORE!CMWRQ
> ;END FTNET
IFE FTNET,<
C ASSIGN,ASSIGN,NOCORE
C DEASSI,DEASSIG,NOCORE!NOINCK
>
C DDT,DDTGO,NOPER!TTYRNU!INCORE!NORUN!NOLOGIN!NOJOBN
IFN FTFINISH,<
C FINISH,CFINI,TTYRNU!NOACT!INCORE!NORUN!NOPER!NOCRLF
C CLOSE,CLSCOM,TTYRNU!NOACT!INCORE!NORUN!NOPER!NOCRLF
>
C REENTER,REENTER,TTYRNU!NOPER!INCORE!NORUN!NOLOGIN!NOJOBN
PAGE
IFN FTATTACH,<
C CSTART,STARTC,TTYRNC!INCORE!NOACT!NORUN!NBATCH
C CCONTINUE,CONTC,TTYRNC!INCORE!NORUN!NBATCH
C DETACH,DETACH,NOCORE!NOJOBN!NOINCK!NBATCH!NOLOGIN
C ATTACH,ATTACH,NOCORE!NOJOBN!NOLOGIN!NOINCK!NBATCH
IFN FTDHIA,<
C XCHNGE,XCHUNI,NOCORE!NOJOBN!NOLOGIN!NOINCK
>
>
C DAYTIME,DAYTIM,NOCORE!NOJOBN!NOLOGIN!NOINCK
C .RESTA,RESTRT,NOCORE!NOJOBN!NOLOGIN!NOINCK
IFN FTTIME,<
C TIME,RUNTIM,NOCORE!NOLOGIN!NOINCK!NOJOBN
C RESOURCES,FREDEV,NOCORE!NOJOBN!NOLOGIN!NOINCK
IFN FTWATCH,<
C USESTAT,USECOM,NOCORE!NOJOBN!NOLOGIN!NOINCK!NOPER!NOMESS
>
>
IFN FTVERS,<
C VERSION,VERCOM,CMWRQ!INCORE,VERTXT
>
IFN FTDISK,<
IFN FTDSTT,<
C DSK,DSKCOM##,NOCORE!NOINCK
>
IFN FTCCLX,<
C MOUNT,RECALL,RUNFLG
C DISMOUNT,RECALL,RUNFLG
>
IFN FTQCOM,<
C QUEUE,RUNQUE,RUNFLG!NOLOGIN,QUEUE
C CPUNCH,RUNQUE,RUNFLG!NOLOGIN
C PLOT,RUNQUE,RUNFLG!NOLOGIN
C PRINT,RUNQUE,RUNFLG!NOLOGIN
C PUNCH,RUNQUE,RUNFLG!NOLOGIN
C SUBMIT,RUNQUE,RUNFLG!NOLOGIN
C TPUNCH,RUNQUE,RUNFLG!NOLOGIN
IFN FTGALAXY,<
C ALLOCA,RUNQUE,RUNFLG
C FREE,RUNQUE,RUNFLG
>>>
IFN FTBCOM,<
C IF,BAONLY,NOCORE
C GOTO,BAONLY,NOCORE
C BACKTO,BAONLY,NOCORE
C OPERATOR,BAONLY,NOCORE
C NOOPERATOR,BAONLY,NOCORE
C ERROR,BAONLY,NOCORE
C NOERROR,BAONLY,NOCORE
C SILENCE,BAONLY,NOCORE
C REVIVE,BAONLY,NOCORE
>
PAGE
IFN FTTALK,<
C SEND,SEND,NOCORE!NOJOBN!NOLOGIN!NOINCK!NBATCH
>
C .TYPE,RETYPE##,NOCORE!NOJOBN!NOLOGIN!NOINCK!NOCRLF!NOMESS!NOPER
IFN FTMIC,<
C I,RUN..I,NOCORE!NOLOGIN!NOPER!TTYRNU!NOCRLF!NOACT!NORUN!INCORE
C COJOB,RUNMIC,NOCORE!NOPER!TTYRNU!NOCRLF!INCORE!NOACT!NORUN
C WHENEVER,RUNMIC,NOCORE!NOPER!TTYRNU!NOCRLF!INCORE!NOACT!NORUN!NBATCH
C ON,RUNMIC,NOCORE!NOPER!TTYRNU!NOCRLF!INCORE!NOACT!NORUN!NBATCH
C LET,RUNMIC,NOCORE!NOPER!TTYRNU!NOCRLF!INCORE!NOACT!NORUN!NBATCH
C IF,RUNMIC,NOCORE!NOPER!TTYRNU!NOCRLF!INCORE!NOACT!NORUN!NBATCH
C GOTO,RUNMIC,NOCORE!NOPER!TTYRNU!NOCRLF!INCORE!NOACT!NORUN!NBATCH
C BACKTO,RUNMIC,NOCORE!NOPER!TTYRNU!NOCRLF!INCORE!NOACT!NORUN!NBATCH
C OPERATOR,RUNMIC,NOCORE!NOPER!TTYRNU!NOCRLF!INCORE!NOACT!NORUN!NBATCH
C NOOPERATOR,RUNMIC,NOCORE!NOPER!TTYRNU!NOCRLF!INCORE!NOACT!NORUN!NBATCH
C ERROR,RUNMIC,NOCORE!NOPER!TTYRNU!NOCRLF!INCORE!NOACT!NORUN!NBATCH
C NOERROR,RUNMIC,NOCORE!NOPER!TTYRNU!NOCRLF!INCORE!NOACT!NORUN!NBATCH
C SILENCE,RUNMIC,NOCORE!NOPER!TTYRNU!NOCRLF!INCORE!NOACT!NORUN!NBATCH
C PLEASE,RUNPLS,NOCORE!NOPER!TTYRNU!NOCRLF!INCORE!NOACT!NORUN!NBATCH
C REVIVE,RUNMIC,NOCORE!NOPER!TTYRNU!NOCRLF!INCORE!NOACT!NORUN!NBATCH
C MIC,RUNMIC,NOCORE!NOPER!TTYRNU!NOCRLF!INCORE!NOACT!NORUN!NBATCH
C DO,RUNMIC,NOCORE!NOPER!TTYRNU!NOCRLF!INCORE!NOACT!NORUN!NBATCH
> ;END OF FTMIC STUFF
IFN FTLOGIN,<
C SCHEDULE,SKEDUL,NOCORE!NOJOBN!NOLOGIN!NOINCK
C LOGIN,CLOGIN,RUNFLG!NOLOGIN,LOGTXT
>
IFE FTLOGIN,<
C LOGIN,CPOPJ##,NOCORE!NOACT!NORUN!INCORE,LOGTXT
>
IFN FTREASSIGN,<
C REASSI,REASS,NOCORE!NOACT!INCORE!CMWRQ!NORUN
>
IFN FTSET,<
C SET,SET,NOCORE!NOJOBN!NOLOGIN!NOINCK
>
C TTY,TTYCMD,NOCORE!NOLOGIN!NOJOBN!NOINCK!NBATCH
IFN FTNET,<
C LOCATE,CLOCATE##,NOCORE
C WHERE,CWHERE##,INCORE!CMWRQ!NOCORE!NOLOGIN
>
IFN FTDAEM,<
C DCORE,DCORE,NOCORE!NOACT!NORUN!NOCRLF!NOPER!TTYRNW!INCORE!NXONLY
C DUMP,DCORE,NOCORE!NOACT!NORUN!NOCRLF!NOPER!TTYRNU!INCORE!NXONLY,DUMP
C .DUMP,CDUMPR,NOCORE!NOACT!NORUN!NOCRLF!NOPER!NOMESS!TTYRNU!INCORE
>
C INITIA,RUNAME,RUNFLG!NOLOGIN,INITXT
IFN FTCCLX,<
C DIRECT,RUNAME,RUNFLG
C HELP,RUNAME,NOCORE!NOLOGIN!NOPER!TTYRNU!NOCRLF!NOACT!NORUN!INCORE
C SYSTAT,RUNAME,RUNFLG!NOLOGIN
C FILE,RECALL,RUNFLG
IFE FTMIC,<
C PLEASE,RUNAME,NOCORE!NOPER!TTYRNU!NOCRLF!INCORE!NOACT!NORUN!NBATCH
>
C FUDGE,RUNPIC,RUNFLG
C CREF,RUNAMC,RUNFLG
C SOS,RUNAME,RUNFLG
IFN FTLOGIN&FTACCT&FTDAEM,<
C CSHIFT,CSHIFT,RUNFLG
>
IFN FTLOGIN&FTACCT,<
C ACCOUNT,CACCT,NOCORE
C SESSION,CSESSN,RUNFLG
>
>
IFN FTCCL,<
C COMPILE,CCLRUN,RUNFLG,COMPIL
C DEBUG,CCLRUN,RUNFLG
C EXECUTE,CCLRUN,RUNFLG
C LOAD,CCLRUN,RUNFLG
>
PAGE
IFN FTCCLX,<
C CREATE,CCLRUN,RUNFLG
C DELETE,CCLRUN,NOCORE!NOPER!TTYRNU!NOCRLF!INCORE!NOACT!NORUN
C EDIT,CCLRUN,RUNFLG
C LIST,CCLRUN,RUNFLG
C MAKE,CCLRUN,RUNFLG
C RENAME,CCLRUN,RUNFLG
C TECO,CCLRUN,RUNFLG
C TYPE,CCLRUN,RUNFLG
C COPY,CCLRUN,RUNFLG
C PRESERVE,CCLRUN,RUNFLG
C REWIND,CCLRUN,RUNFLG
C UNLOAD,CCLRUN,RUNFLG
C ZERO,CCLRUN,RUNFLG
C SKIP,CCLRUN,RUNFLG
C BACKSPACE,CCLRUN,RUNFLG
C EOF,CCLRUN,RUNFLG
C PROTECT,CCLRUN,RUNFLG
C LABEL,CCLRUN,RUNFLG
>
IFN FTCCL,<
C CTEST,CCLRUN,RUNFLG ;ALWAYS LAST CCLRUN
>
>
DEFINE SNAMES,<
IFN FTSET,<
IFN FTWATCH,<
C WATCH,SETWAT,NOCORE
>
IFN FTTLIM,<
C TIME,SETIME,NOCORE
>
IFN FTSPL,<
C SPOOL,SETSPL,NOCORE
C CDR,SETCDR,NOCORE
>
C SCHEDULE,SETSCD,NOCORE!NOJOBN!NOLOGIN!NOINCK
C CORMAX,SETMAX,NOCORE!NOJOBN!NOLOGIN!NOINCK
IFN FTLOCK,<
C CORMIN,SETMIN,NOCORE!NOJOBN!NOLOGIN!NOINCK
>
IFN FTSEDAT,<
C DAYTIM,SETDAY,NOCORE!NOJOBN!NOLOGIN!NOINCK
C DATE,SETDAT,NOCORE!NOJOBN!NOLOGIN!NOINCK
>
C OPR,SETOPR,NOCORE!NOJOBN!NOLOGIN!NOINCK
C TTY,TTYCMD,NOCORE!NOJOBN!NOLOGIN!NOINCK!NBATCH
IFN FTHPQ,<
C HPQ,HPQCMD##,NOCORE
>
IFN FTMTSET,<
C DENSITY,MTADEN,NOCORE!NOACT
C BLOCKSIZE,MTABLK,NOCORE!NOACT
IFN FTDX10,<
C RETRY,MTARTY,NOCORE!NOACT
>
>
IFN FTMS,<
C CPU,CPUCMD##,NOCORE
>
IFN FTDBAD!FTCAFE!FTDAS78,<
C NOMESS,DSKSIL,NOCORE!NOJOBN!NOLOGIN!NOINCK
> ;END FTDBAD!FTCAFE!FTDC78
IFN FTDPRI,<
C DSKPRI,DSKPRI,NOCORE
>
PAGE
C DSKFUL,FULSTP,NOCORE
C BREAK,SETBRK##,NOCORE
IFN FTVM,<
C VMMAX,SETVMX##,NOCORE!NOJOBN!NOLOGIN!NOINCK
C VIRTUAL,SETUVC##,NOCORE
C PHYSICAL,SETUPC##,NOCORE
>
IFN FTNET,<
C HOSTESS,HOST.C##,INCORE!CMWRQ!NOCORE!NOPER!NOCRLF!NOLOGIN
>
IFN FTMONL!FTMOFFL,<
C MEMORY,SETMEM,NOCORE!NOLOGIN!INCORE!CMWRQ
>
IFN FTGALAXY,<
C DEFER,SETDFC,NOCORE
C NODEFER,SETNDC,NOCORE
>;END IFN FTGALAXY
C DEFAULT,SETDFL,NOCORE
IFN FTPATT,<
C CTEST,CPOPJ##,NOCORE!NOJOBN!NOLOGIN!NOINCK ;ALWAYS LAST
>
> ;END CONDITIONAL ON FTSET
> ;CLOSE DEFINITION OF SNAMES
;GENERATE TABLE OF SIXBIT COMMAND NAMES
$LOW
DEFINE C(A,B,D,E) <
IFNB <E>,<E:>
<SIXBIT /A/>
>
XALL
COMTB2::SNAMES
DISPL2==.-COMTB2 ;LENGTH
COMMX2==:<DISPL2-1>B26
COMTAB::NAMES
LASCCL==.
DISPL==.-COMTAB ;LENGTH OF TABLE
COMMXL==:<DISPL-1>B26
$HIGH
;GENERATE THE DISPATCH TABLE PLUS SPECIAL BITS
DEFINE C(A,B,D,E) <
IFN FTCCL,<IFDEF DISP,<IFG .-DISP-COMPIL+COMTAB,<
IFDIF <B><CCLRUN>,<IF1,<PRINTX ? B DOES NOT PRECEDE CCLRUN IN COMTAB>>
RELOC .-1>>>
Z B (D)
>
DISP2: SNAMES
DISP: NAMES
;AND ONE MORE FOR AN UNKNOWN COMMAND DISPATCH
COMERD: XWD NOCORE+NOJOBN+NOLOGIN+NOINCK,NOCOM
SALL
SUBTTL CORE 0 COMMAND
COR0: JUMPE R,CPOPJ## ;RETURN IF JOB DOES NOT HAVE CORE
IFN FTFDAE,<
PUSHJ P,CHKXTM ;SEE IF AN "EXIT" MESSAGE SHOULD
; BE SENT TO THE FILE DAEMON AND IF
; SO, SEND IT.
>
JSP T2,MONJOB## ;SET TO RUN MONITOR JOB(PC IN EXEC MODE)
; RETURN HERE AT UUO LEVEL(NO ACS SET UP)
MOVEI T2,ESTOP## ;PUT ERROR STOP ON END OF PDL
JSP T1,MONSTR## ;START MONITOR JOB BY SETTING UP ACS AND
JOB1: PUSHJ P,RESET## ;RELEASE ALL IO DEVICES ASSIGNED TO THIS JOB
PUSHJ P,TTYFNU## ;FIND TTY FOR THIS JOB(SETUP J WITH JOB NO.)
ZAPPGM::
IFN FTSWAP,<
PUSHJ P,NOCORQ## ;PUT JOB IN NO CORE Q
PUSHJ P,ZERSWP## ;CLEAR SWAP SPACE (IF ANY) FOR LOW SEG
; AND CLEAR SWP,SHF,IMGIN,IMGOUT FOR LOW SEG
>
IFN FT2REL,<
PUSHJ P,KILHGH## ;HIGH SEG FOR THIS USER, RETURN CORE
; REMOVE HIGH SEG FROM THIS USER
; LOGICAL ADDRESSING SPACE
; IF NO OTHER USERS IN CORE ARE USING IT
; RETURN DISK SPACE IF NO LONGER SHARABLE HIGH SEG
>
IFE FTVM,<
SKIPE T2,USREPL## ;DOES THIS JOB HAVE AN EXTENDED EXEC PD LIST?
; (WAS THERE A PDL OV IN MONITOR)
PUSHJ P,GIVEPL## ;YES, GIVE BACK MONITOR FREE CORE
> ;END IFE FTVM
PUSHJ P,CLRTAB ;CLEAR BITS AND TABLE ENTRIES
MOVEI T1,0 ;RETURN BOTH PHYSICAL AND LOGICAL CORE
SOS (P) ;NEGATE SKIP RETURN WHICH CORE1 WILL DO
JRST CORE1## ;GO DO IT AND RETURN TO CALLER
SUBTTL PJOB & KJOB COMMANDS
; "PJOB" PRINT JOB NUMBER OF JOB TTY IS ATTACHED TO
PJOB:: MOVE T1,J ;JOB NO.
DECLF:: PUSHJ P,RADX10## ;PRINT T1 AS DEC. THEN CRLF
JRST CRLF
IFN FTPJOB,<
;THIS PRINTS OUT:
;
; JOB N USER NAME [P,PN] TTY#
;
PJOBX: PUSHJ P,GETJOB ;GET JOB NUMBER TO DO PJOB ON
SKIPA ;NO JOB NUMBER SO USE CURRENT JOB
MOVE J,T2 ;PUT REQUESTED JOB NUMBER IN AC(J)
JUMPE J,ATT4 ;ERROR IF NO JOB ASSIGNED
PUSHJ P,INLMES ;GIVE FOLLOWING MESSAGE
ASCIZ \Job \ ;
MOVE T1,J ;PRINT THE
PUSHJ P,RADX10## ; JOB NUMBER
PUSHJ P,INLMES ;GIVE FOLLOWING MESSAGE
ASCIZ \ User \ ;
PUSHJ P,FNDPDB## ;SEE IF A PDB AND POINT AC(W) TO IT
JRST PJOBX2 ;NO PDB, SO CAN'T PRINT USERS NAME
MOVE T2,.PDNM1##(W) ;GET FIRST PART OF USERS NAME
PUSHJ P,PRNAME## ;PRINT IT
IFN FTKI10!FTKL10,<
DMOVE T1,.PDNM1##(W) ;GET USERS NAME
JUMPE T2,PJOBX2 ;IF LAST PART IS NULL WE'RE DONE
; WITH THE NAME PRINTOUT
>;END IFN FTKI10!FTKL10
IFN FTKA10,<
SKIPN T2,.PDNM2##(W) ;SEE IF LAST PART OF USERS NAME
; IS NULL
JRST PJOBX2 ;IT IS NULL
MOVE T1,.PDNM1##(W) ;GET FIRST PART OF USERS NAME
>;END IFN FTKA10
TRNN T1,77 ;DOES FIRST NAME END WITH A SPACE?
PUSHJ P,PRSPC ;YES, GIVE A SPACE
MOVE T2,.PDNM2##(W) ;GET LAST PART OF USERS NAME
PUSHJ P,PRNAME## ;PRINT IT
PJOBX2: PUSHJ P,INLMES ;GIVE FOLLOWING MESSAGE
ASCIZ \ [\ ;
HLRZ T1,JBTPPN##(J) ;GET PROJECT NUMBER
PUSHJ P,PRTDI8## ;PRINT IT
PUSHJ P,PRCOM ;PRINT A COMMA
HRRZ T1,JBTPPN##(J) ;GET PROGRAMMER NUMBER
PUSHJ P,PRTDI8## ;PRINT IT
PUSHJ P,INLMES ;GIVE FOLLOWING MESSAGE
ASCIZ \] \ ;
MOVE T2,@TTYTAB##(J) ;GET TTY NAME
TLNN T2,-1 ;SEE IF DETACHED
HRLI T2,'DET' ;DETACHED SO TACK DET TO TTY NUMBER
PUSHJ P,PRNAME## ;PRINT THE TTY NAME
PJRST CRLF ;END WITH A CRLF
>;END IFN FTPJOB
; "KJOB" KILL ATTACHED JOB
KJOB: JUMPE J,ATT4 ;WAS JOB INITIALIZED?
IFN FTLOGIN, <
TLNN P4,JLOG ;TEST JLOG ALSO IN CASE JOB NOT LOGGED IN
JRST KJOB2 ;IF JOB NOT LOGGED IN
IFN FTSWAP, <
PUSHJ P,TTYATI## ;ATTACH TTY
JFCL
>
TLO M,TTYRNU ;SET TTYRNU FOR COMRET
IFN FTPHYO,<
MOVSI P1,PHONLY ;SET PHYSICAL I/O FORCE SYSTEM KJOB
>
IFN FTSET,<
MOVSI T1,(JS.BPR) ;SET BYPASS PROGRAM TO RUN
IORM T1,JBTST2(J) ;TO INSURE KJOB REALLY RUNS
>
IFN FTMS,<
PUSHJ P,ALLJSP## ;SET CPU SPECIFICATION TO MAKE THIS JOB RUNNABLE
; ON ALL CPU'S. THIS ALSO LEAVES A REASONABLE
; SPECIFICATION FOR THE NEXT USER WHO GETS
; THIS JOB NUMBER
>
IFN FTGALAXY,<
SKIPE %SIQSR## ;QUASAR RUNNING?
SETOM ISGALX## ;YES ITS A GALAXY SYSTEM
SKIPE ISGALX## ;IS IT A GALAXY SYSTEM?
;IS QUASAR RUNNING
MOVE P2,LGONAM ;YES, JUST RUN LOGOUT
>
JRST RUNAME ;GO RUN CUSP
>
KJOB2:
IFE FTSWAP+FTLOGIN,<
JUMPE R,JOBKA ;YES. DOES JOB HAVE CORE IN MEMORY?
>
PUSHJ P,GETMIN ;GET MINIMAL JOB AREA ON DISK OR CORE
JUMPE R,DLYCM ;DELAY COMMAND IF CORE ASSIGNED ON DISK
JSP T2,MONJOB## ;YES, SCHEDULE MONITOR JOB(PC IN EXEC MODE)
; RETURN HERE AT UUO LEVEL WHEN SCHEDULED
JOBKL:: MOVEI T2,ESTOP## ;PUT ESTOP ON END OF PDL
JSP T1,MONSTR## ;GO SETUP ACS AND PD LIST AT UUO LEVEL
;RETURN HERE AT UUO LEVEL AFTER BEING SCHEDULED
IFN FTDISK,<
PUSHJ P,DSKKJB## ;CLEAR UP CORE BLOCKS ON A KJOB COMMAND
; MAY GO INTO WAIT, SO DO BEFORE GIVING UP USER CORE
>
IFN FTIPCF,<
PUSHJ P,IPCLGO## ;TELL [SYSTEM] INFO THAT JOB IS GONE
>
IFN FTHSLN,<
JUMPE W,JOBKL1 ;IF THIS JOB HAS A PDB,
SKIPGE .PDDVL##(W) ; AND IF THERE ARE TOO MANY LOGICAL NAMES FOR THE TABLE,
SETZM .PDDVL##(W) ; DON'T TRY TO REBUILD THE TABLE
; SINCE IT IS COUNTER PRODUCTIVE
; AND CAN CAUSE PDLOVF AFTER CORE HAS BEEN FLUSHED
JOBKL1:>
IFE FTLOGIN, <
JOBKA:
IFN FTTIME,<
PUSHJ P,PRTTIM ;PRINT JUST TOTAL RUN TIME
>
PUSHJ P,PRRSP4 ;PRINT CR,LF,PERIOD
MOVSI T1,LDLECS##
IORM T1,LDBDCH##(U) ;SET BIT TO EAT COMMAND
PUSHJ P,TTYSTR## ;START TTY
MOVSI T1,LDLECS##
ANDCAM T1,LDBDCH##(U) ;ONLY
MOVSI T1,LDLCMF ;INCREMENT COMCNT ONE
IORM T1,(U)
>
PUSHJ P,DEASTY ;DEASSIGN ALL BUT TTY
PUSHJ P,JOB1 ;FLUSH CORE AFTER RELEASING DEVICES
PUSHJ P,TTYKIL## ;RETURN TTY TO VIRGIN STATE
JRST KSTOP## ;CLEAR JOB STATUS WORD AND STOP JOB
SUBTTL START GROUP (START,CSTART,REE,DDT)
; "START L" OR "START" - START AT LOC. L OR STARTING ADDRESS
START: ;SAME AS CSTART, DIFF BY COMTAB BITS
; WHICH PUT TTY IN MONITOR OR USER MODE
; "CSTART L" OR "CSTART" - START AT LOC. L(TTY IN COMMAND MODE)
STARTC: MOVE P3,P4 ;SAVE STATUS
PUSHJ P,OCTIN1 ;CONVERT POSSIBLE OCTAL NO ARG.
JRST SNOARG ;NO ARG SPECIFIED RETURN
JRST COMERA ;ILLEGAL CHARACTER
IFN FTLOGIN,<
TLNN P3,JLOG ;IS IT LOGGED IN?
JRST STARTE ;NO--ERROR
>
TRNE P3,JS.XO!JS.RUU ;SEE IF EXECUTE ONLY
JRST ILLXO ;YES -- BOMB USER
IFN FT2REL,<
PUSHJ P,CHKMED## ;CHECK TO SEE IF HIGH SEG WHICH IS SHARABLE
; IF YES, TURN ON USER MODE WRITE PROTECT
; FOR THIS USER, AND SET MEDDLE BIT SO HE CANNOT
; TURN UWP OFF.
>
TLZ T2,-1 ;CLEAR JUNK
JRST STARTN ;START IN USER MODE
IFN FTLOGIN,<
STARTE: MOVEI T1,LOGPLM ;SETUP ERROR MESSAGE
PJRST ERRMES ;GO ISSUE IT
>
ILLXO: MOVEI T1,ILLXOM ;GET ERROR MESSAGE
PJRST ERRMES ;GO ISSUE IT
;"REENTER" - REENTER USER PROGRAM
REENTER:
HRRZ T2,JOBREN##(R) ;GET REENTER ADDRESS FROM JOB DATA AREA
JRST CHKPCM ;CHECK IF PC IS IN MONITOR
; "DDT" - START EXECUTION AT DDT IN USER AREA
DDTGO:
IFN FTVM,<
JUMPE R,STARTE ;ERROR IF NO CORE (NOT A JOB)
>
HRRZ T2,JOBDDT##(R) ;DDT STARTING ADR. IN JOB DATA AREA
IFN FTVM,<
JUMPN T2,CHKPCM ;OK IF WE HAVE DDT
TLNN P4,JLOG ;MAKE SURE LOGGED IT
JRST CHKPCM ;NOT, BOMB HIM
TRNN P4,JS.XO!JS.RUU ;SKIP IF EXECUTE ONLY
PJRST GETDDT## ;MERGE IN DDT
>
CHKPCM: JUMPE J,STARTE ;ERROR IF NOT A JOB (DDT,REENTER)
JUMPE T2,CHKSTR ;IS A START ADR SPECIFIED? (ERROR IF 0)
STARTN:
MOVE T1,JOBPC##(R) ;YES, GET JOB'S PC
HLR T1,JBTSTS##(J) ;AND JOB STATUS BITS
TDNE T1,[XWD USRMOD,JERR] ;IS JOB IN USER MODE, OR STOPPED ON AN ERROR?
JRST USTART## ;YES, START HIM UP NOW
HRRZ T1,T2 ;GET START ADDRESS
PUSHJ P,SETUTP## ;SETUP UUO TRAP
JRST USTART## ;START USER
JRST RSTART## ;CLEAR STATUS FLAGS AND START JOB
; IN MIDDLE OF MONITOR WHERE IT STOPPED
;HERE TO START USER WHEN NO START ADR TYPED IN
SNOARG:
HRRZ T2,JOBSA##(R) ;START ADR. SPECIFIED BY LINKING LOADER
; FROM END STATEMENT
;FALL INTO CHKSTR
;HERE TO CHECK TO SEE IF STARTING ADDRESS IS NON-ZERO, AND START USER IF OK
CHKSTR: JUMPE J,STARTE ;ERROR IF NOT A JOB
JUMPN T2,USTART## ;IS IT NON-ZERO?, IF YES
; STORE OLD PC IN JOBOPC IN JOB DATA AREA
; THEN START WITH PC IN USER MODE
JSP T1,ERRMES ;NO, PRINT "NO START ADR"
MESNSA: ASCIZ /No start adr
/
SUBTTL DUMP & DCORE COMMANDS
IFN FTDAEM,<
IFN FTVM,<
DAECOM: HLL M,DISP+DUMP-COMTAB ;GET BITS FOR COMRET
>
DCORE: PUSHJ P,STDAEM##
JRST NODAEM
MOVEI T1,JDC
ORM T1,JBTSTS##(J)
PJRST REQUE##
NODAEM: JSP T1,ERRMES
ASCIZ /DAEMON NOT RUNNING
/
;HERE TO RUN DUMP AT CCL ENTRY POINT
CDUMPR: PUSHJ P,SAVE1## ;SAVE P1
MOVE T1,DUMP ;NAME OF PROGRAM TO RUN
MOVEI P1,1 ;LH=0 FOR PHYSICAL ONLY, RH=OFFSET FOR CCL ENTRY
JRST ARCOM ;GO RUN THE CUSP
>
IFN FTLOGIN&FTACCT&FTDAEM,<
CSHIFT: PUSHJ P,OPRLGL ;MUST BE OPR
JRST COMERA ;ILLEGAL IF NOT OPR
JRST DCORE ;GO START UP DAEMON
>
SUBTTL CONTROL-C PROCESSING
; "HALT" OR "<CONTROL>C"
;SCANNER ROUTINES DUMMY UP HALT WHEN CONTROL C TYPED IN
;STOP MUST BE DELAYED IF THIS JOB IS SYSTEM TAPE USER
;AND SYSTEM TAPE IS ACTIVE. OTHERWISE, THE JOB WILL NOT BE
;STOPPED WHEN DONE USING THE SYSTEM TAPE.
;IF JOB IS IN MONITOR MODE AND NOT IN TTY WAIT THIS JOB CANNOT BE STOPPED YET
;IN THIS CASE SET A BIT IN JOB STATUS WORD (CNTRLC) WHICH WILL BE CHECKED
;WHEN JOB RETURNS TO USER MODE
STOP: MOVE P2,HALTXT
STOPF:
JUMPE J,STOPB
IFN FTJCON!FTDAEM,<
TLNE P4,JACCT ;JACCT AND WAITING
TRNN P4,JDCON ;..
JRST STOPD ;NO--PROCEDE
JUMPL P4,STOPD ;JUMP IF RUN BIT IS SET
TLO M,NOCRLP ;KILL THE DOT
POPJ P,0 ;PUNT THE COMMAND
STOPD: MOVEI T1,JDCON!JDC ;CLEAR JCONT.ABLE (DEV OK?) AND DAEMON BIT
ANDCAM T1,JBTSTS##(J) ; SO USER CAN STOP ONCE-A-MINUTE STUFF
>
IFN FTMS,<
PUSHJ P,SPSTOP## ;TEST IF JOB ON SLAVE, IF SO SIGNAL TO STOP IT,
JRST DLYCM1 ; AND DELAY COMMAND
>
IFE FTDISK,<
CAMN J,STUSER## ;IS THIS SYSTEM TAPE USER?
JRST CFINS ;YES, DO FINISH SYS COMMAND
>
IFN FTDISK,<
PUSHJ P,SIMCHK## ;OK TO "STOP IN MONITOR"?
JRST STOPA ;YES, STOP JOB
MOVSI T1,CNTRLC ;NO, FLAG THAT USER MUST BE STOPPED WHEN
IORB T1,JBTSTS##(J) ; RETURNING TO USER MODE IN UUO HANDLER
TLNE M,CMWRQ ;IS JOB IN COMMAND WAIT?
PUSHJ P,REQUE## ;YES. PUT HIM BACK IN RUNNABLE QUEUE
JRST DLYCM1 ;THEN DELAY COMMAND (IE ECHO CR-LF, DOT)
;UNTIL SWAPPED IN
>
STOPA: MOVSI T1,SWP ;IS THE JOB SWAPPED?
TDNE T1,JBTSTS##(J) ;IF SO, DELAY THE CONTROL C SINCE
PJRST DLYCM ; THE JOB DATA AREA MUST BE IN CORE
; TO SEE IF THE JOB IS INTERCEPTING
; CONTROL C'S
MOVSI T1,CNTRLC+CMWB ;DELAYED CONTROL C+ COMMAND WAIT
ANDCAM T1,JBTSTS##(J) ;CLEAR THEM
IFN FTWATCH,<
SKIPL JBTSTS##(J) ;IS RUN BIT ALREADY OFF?
JRST STOPAA ;IF YES, DO NOT PRINT [XXXX] AGAIN
PUSHJ P,STOPX ;STOP JOB
TLNN M,NOPER ;IF NO PERIOD, SKIP [XXX]
PUSHJ P,WCHEND ;PRINT [XXXX] CRLF IF USER IS WATCHING RESPONSES
JRST STOPAB ;GO FINISH
>
STOPAA: PUSHJ P,STOPX ;STOP JOB
STOPAB:
IFN FTLOGIN,<
SKIPGE T1,JBTSTS##(J) ;GET JOB STATUS
JRST STOPB ;IF NOT STOPPED, DON'T KJOB
TLNN T1,JLOG ;IS JOB LOGGED IN?
PUSHJ P,TTKJOB##
>
STOPB:
IFN FTSET,<
SKIPL JBTSTS##(J) ;RUNNING?
PUSHJ P,FNDPDB ;FIND PDB
POPJ P,
MOVEI T1,TTFCXU## ;FORCE .DUMP
MOVEI T2,JS.RPC ;IF JS.RPC = 1
SKIPE .PDPGM##(W) ;AND PROGRAM TO RUN
TDNN T2,JBTST2##(J) ; ..
POPJ P,0
PUSHJ P,TTFORC##
PJRST DLYCM
>
IFE FTSET,<
POPJ P,0
>
STOPX: PJUMPL P2,STOP1C## ;IF "HALT", STOP REGARDLESS
PJRST STOP1## ;IF "^C^C", STOP IF POSSIBLE
;MONITOR COMMAND LEVEL RESPONSE ROUTINES
;FIVE MULTIPLE ENTRY SUBROUTINES TO PRINT SYSTEM RESPONSE DATA FOR A JOB
;CONTROL REACHES ONE OF THESE ROUTINES ON ANY OF THE FOLLOWING:
;1. USER TYPES CONTROL C
;2. PROGRAM HALTS
;3. PROGRAM CALLS EXIT, OR CALL N,EXIT
;4. DEVICE BECOMES UNREADY DEVICE XXX OK?
;5. ERROR IN JOB MESSAGE
;PRRSP1 - PRINT CRLF CRLF
;PRRSP3 - PRINT [XXXX] CRLF IF USER WATCHING SYSTEM DATA RESPONSE
;PRRSP4 - PRINT CRLF
;PRRSP5 - PRINT PERIOD
PRRSP1::PUSHJ P,CRLF ;PRINT CR-LF
PRRSP3::
IFN FTWATCH,<
PUSHJ P,WCHEND ;PRINT SYSTEM RESPONSE DATA IF USER IS WATCHING IT.
>
PRRSP4::PUSHJ P,CRLF ;PRINT CR-LF
PRRSP5::PJRST PRPER ;PRINT PERIOD
SUBTTL SET COMMAND AND UUO -- DISPATCH
;SET COMMAND/UUO
IFN FTSET,<
SET: MOVEI P3,DISP2 ;START OF SET-TABLE
MOVE P4,[XWD -DISPL2,COMTB2] ;LENGTH, NAME
POP P,T1 ;REMOVE RETURN ADR FROM STACKS
JRST COM1 ;GO INTERPRET 2ND PART OF COMMAND
> ;END CONDITIONAL ON FTSET
;SUBROUTINE TO SEE IF A SYSTEM-WIDE SET COMMAND IS LEGAL
;SKIP RETURN IF LEGAL, ELSE NON-SKIP
SETLGF==FUPOPJ##
SETLGK==FUPOJ1##
SETLGL::PUSHJ P,OPRLGL ;OPR?
SKIPA T2,JBTPPN##(T1) ;NO, CHECK FURTHER
JRST CPOPJ1## ;YES, OK
CAMN T2,FSFPPN## ;1,2?
AOS (P) ;YES, OK
POPJ P, ;RETURN
OPRLGL: PUSH P,U ;PRESERVE LINE
PUSH P,F ;AND F
MOVE T1,J
HRRZ T3,OPRLDB## ;SEE IF OPR
CAIN T3,(U) ;ALSO OPR
JRST SETLGK ;WE WIN
IFN FT5UUO,< ;CONDITIONAL BECAUSE OF CTLJB
MOVE T2,JBTSTS##(J) ;GET JOB STATUS
TLNE T2,JLOG!JNA ;A JOB ON THE TTY?
JRST SETLGF ;YES. COMMAND LOSES
LDB T2,LDPLNO## ;GET LINE NUMBER
PUSHJ P,CTLJB## ;LOSE -- SEE IF PTY
JUMPLE T1,SETLGF ;NO --- GIVE UP
HRRZ U,TTYTAB##(T1) ;OK -- GET DDB
HRRZ U,DDBLDB##(U) ;THEN GET LDB
JUMPE U,SETLGF ;IF CONTROL JOB DETACHED STOP SCAN AND FAIL
MOVE T2,JBTLIM##(J) ;GET BATCH JOB BITS
TLNE T2,(JB.LBT)
JRST SETLGF ;YES. COMMAND LOSES
CAIN T3,(U) ;OR HIS TTY?
JRST SETLGK ;YES. COMMAND WINS
> ;END CONDITIONAL ON FT5UUO
JRST SETLGF ;LOSE
SUBTTL SET COMMAND AND UUO -- JBSET.
IFN FTSET,<
;HERE FROM UUOCON ON JBSET. UUO
;CALL: MOVE AC,[+N,,BLK]
; CALLI AC,JBSET.
; ERROR RETURN AC=0
; NORMAL RETURN
;BLK: JOB NUMBER
; XWD FUNCTION,VALUE
JBSET.::IFN FTLOGIN,<
PUSHJ P,PRVJ ;ARE WE A GOOD GUY
JRST JBSET1 ;YES--GO DO THE SET
JRST RTZER## ;NO--RETURN 0
>
JBSET1: PUSH P,M ;SAVE M
MOVEI M,(T1) ;GET ADDRESS OF BLK
PUSHJ P,GETWDU## ;PICK UP JOB#
MOVE J,T1 ;PUT JOB NUMBER IN J
PUSHJ P,LGLPRC## ;SKIP IF LEGAL JOB NUMBER
JRST JBSET2 ;NO, GIVE UP
MOVSI T1,JNA ;SEE IF JOB EXISTS
TDNN T1,JBTSTS##(J) ; AND EXISTENT
JRST JBSET2 ; YES--GIVE UP
MOVE T4,J ;SAVE NEW JOB
PUSHJ P,GETWD1## ;GET NEXT WORD(XWD) PUT IT IN T1
MOVE J,T4 ;RESTORE NEW JOB
IFN FTLOGIN,<NOSCHED
PUSH P,JBTPPN##(J) ;SAVE PPN
MOVE T2,FSFPPN## ;GET A GOOD PPN
MOVEM T2,JBTPPN##(J) ;FAKE OUT PRIVJ AND PRVBIT
>
PUSH P,J
PUSH P,W ;PRDSERVE W
PUSHJ P,FNPDBS## ;GET THE PDB FOR THE TARGET JOB
PUSHJ P,SETUUO ;DO IT
TDZA T1,T1 ;NOTE BAD RETURN
SETO T1, ;GOOD RETURN
POP P,W ;RESTORE W
POP P,J
IFN FTLOGIN,<
POP P,JBTPPN##(J) ;RESTORE PPN
SCHEDULE
>
POP P,M
JUMPN T1,CPOPJ1## ;PASS THE GOOD WORD ON
JRST STOTAC## ;ELSE RETURN ZERO
JBSET2: POP P,M ;RESTORE AC
JRST RTZER## ;GIVE ERROR
SUBTTL SET COMMAND AND UUO -- PRIVILEGE TESTS
;DISPATCH HERE (FROM UUOCON) ON A SETUUO
;CALL: MOVE AC,[XWD FUNCTION,ARGUMENT]
; CALLI AC,SETUUO
NEDPRV==1 ;BIT ON IN DISPATCH TABLE IF PRIVS NEEDED
SETUUO::HRRZ T2,T1 ;ARGUMENT
HLRZS T1 ;FUNCTION
CAILE T1,SETLEN ;A LEGAL FUNCTION?
POPJ P, ;NO, RETURN DOING NOTHING
IFN FTLOGI,<
MOVE T1,SETTBL(T1) ;YES, GET TABLE WORD
TLNE T1,NEDPRV ;NEED SPECIAL PRIVS TO DO IT?
PUSHJ P,PRVJ ;YES, JOB HAVE PRIVS?
>
PJRST (T1) ;YES, DISPATCH
IFN FTLOGI,<
POPJ P, ;NO, RETURN DOING NOTHING
>
> ;END CONDITIONAL ON FTSET
IFE FTSET,<
XP JBSET.,CPOPJ##
XP SETUUO,CPOPJ##
>
;SUBROUTINE TO SEE IF A JOB HAS PRIVILEGE:
;CALL: MOVE T1,BIT TO BE TESTED IN PRIVILEGE WORD
; MOVE J,JOB NUMBER
; PUSHJ P,PRVBIT
; RETURN IF PRIVILEGED BY BIT, [1,2], OR JACCT
; RETURN IF NOT PRIVILEGED
;PRVBT RESPECTS T2
IFN FTPRV,<
PRVBT::
PRVBIT::TDNE T1,JBTPRV##(J) ;IS REQUESTED BIT ON IN TABLE?
POPJ P,0 ;YES. OK RETURN
PJRST PRVJ ;NO. CHECK FOR JACCT OR FSFPNN
IFE FTLOGIN,<JRST CPOPJ1##> ;ERROR RETURN IN NON-LOGIN SYSTEM
> ;END CONDITIONAL ON FTPRV
;SUBROUTINE TO TEST FOR [1,2] OR JACCT -
;PRIVILEGES NEEDED IF A SETUUO FRO A SYSTEM-PARAMETER IS DONE
;RETURNS CPOPJ IF HAVE PRIVS, CPOPJ1 IF DONT
;RESPECTS T2
IFN FTLOGIN,<
PRVJC:: MOVE T3,JBTSTS##(J)
JRST PRVJ1
PRVJ:: MOVE T3,JBTSTS##(J) ;JBTSTS WORD
SKIPGE M ;COMMAND LEVEL?
TLZ T3,JACCT ;YES--CLEAR JACCT
PRVJ1: MOVE T4,JBTPPN##(J) ;JOB'S PRJ-PRG
CAME T4,FSFPPN## ;=1,2?
TLNE T3,JACCT ;NO, JACCT ON?
POPJ P, ;YES, OK
PJRST CPOPJ1## ;NO, ERROR RETURN
> ;END CONDITIONAL ON FTLOGIN
IFN FTSET,<
;TABLE FOR SETUUO
SETTBL: XWD NEDPRV,SETMX1 ;(0) - SET CORMAX
XWD NEDPRV,SETMN1 ;(1) - SET CORMIN
XWD NEDPRV,SETDA1 ;(2) - SET DAYTIME
XWD NEDPRV,SETSC1 ;(3) - SET SCHED
EXP SETSPI ;(4) - SET CDR
EXP SETSPB ;(5) - SET SPOOL
EXP SETWTU ;(6) - SET WATCH
XWD NEDPRV,SETDT1 ;(7) - SET DATE
XWD NEDPRV,SETOP1 ;(10) - SET OPR (INDIRECT)
XWD NEDPRV,SETKSY ;(11) - SET KSYS
IFN FTTLIM,<XWD NEDPRV,CORELM##>
IFE FTTLIM,<XWD NEDPRV,CPOPJ##>
XWD NEDPRV,SETIM1 ;(13) - SET TIME LIMIT
EXP SETCPU## ;(14) - SET USER CPU SPECIFICATION
XWD NEDPRV,SETCRN## ;(15) - SET CPU RUNABILITY
XWD NEDPRV,SETLMX ;(16) - SET LOGMAX
XWD NEDPRV,SETBMX ;(17) - SET BATMAX
XWD NEDPRV,SETBMN ;(20) - SET BATMIN
EXP DSKFUL ;(21) - SET DSKFUL- PAUSE OR ERROR
IFN FTVM,<
XWD NEDPRV,SETVM1## ;(22) - SET VMMAX (SYSTEM-WIDE)
XWD NEDPRV,CPOPJ1 ;(23) - HISTORICAL
XWD NEDPRV,SETUVL## ;(24) - SET VM MAXIMA (USER)
EXP SETUV1## ;(25) - SET CURRENT VM MAXIMA (USER)
EXP SETVTM## ;(26) - SET TIME FOR VIRTUAL TIME INTERRUPTS
>
IFE FTVM,<
EXP CPOPJ##
EXP CPOPJ##
EXP CPOPJ##
EXP CPOPJ##
EXP CPOPJ##
>
EXP SETABR## ;(27)-SET ADDRESS BREAK
EXP SETPGM ;(30)-SET PROGRAM TO RUN
IFN FTGALAXY,<
EXP SETDFU ;(31)-SET DEFERED SPOOLERS
>
IFE FTGALAXY,<
EXP CPOPJ##
>
IFN FTNET,<
XWD NEDPRV,HOST.U## ;(32)-SET HOST
>
IFE FTNET,<
EXP CPOPJ##
>
EXP SETDLU ;(33)-SET DEFAULTS
IFN FTPATT,<
EXP CPOPJ## ;ROOM FOR PATCHING
>
SETLEN==.-SETTBL-1
IFE FTLOCK,<
SETMN1==CPOPJ##
>
IFE FTSPL,<
SETSPI==CPOPJ##
SETSPB==CPOPJ##
SETSPL==CPOPJ##
>
IFE FTWATCH,<
SETWTU==CPOPJ##
>
IFE FTSEDAT,<
SETDT1==CPOPJ##
SETDA1==CPOPJ##
>
IFE FTTLIM,<
SETIM1==CPOPJ##
>
IFE FT5UUO,<
SETKSY==CPOPJ##
>
IFN FTTLIM,<>
;STILL IN FTSET CONDITIONAL
SUBTTL SET COMMAND AND UUO -- CORMAX AND CORMIN
IFN FTLOCK,<
SETMX1: SKIPN LOCK## ;JOB BEING LOCKED?
JRST SETMX2 ;NO - OK
POPJ P, ;YES - CAN'T CHANGE CORMAX
>
SETMAX: PUSHJ P,CORLGL ;GET DECIMAL ARG IF LEGAL
IFN FTLOCK,<
SKIPE LOCK## ;IF A JOB IS BEING LOCKED,
JRST DLYCM1 ;WAIT TILL LATER
>
SETMX2: ;SET NEW VALUE IN CORMAX
IFE FTLOCK,<
SETMX1==SETMX2
>
MOVE T1,MAXMAX## ;MAXMAX IS HIGHEST CORMAX
CAMG T2,T1 ;TRY TO SET IT TOO HIGH?
JRST SETAOK ;NO
JUMPGE M,CPOPJ
PUSHJ P,INLMES
ASCIZ /
%Exceeds physical maximum-/
MOVE T1,MAXMAX## ;GET MAXIMUM
LSH T1,W2PLSH## ;SET UP FOR P OR K
PUSHJ P,PRCORE ;TELL WHAT IT IS
MOVE T2,MAXMAX## ;REDUCE TO PHYSICAL LIMIT
SETAOK: CAIL T2,MINMAX## ;TOO SMALL?
JRST SETIOK ;NO
JUMPGE M,CPOPJ
PUSHJ P,INLMES
ASCIZ /
%Below minimum-/
MOVEI T1,MINMAX## ;GET MINIMUM
LSH T1,W2PLSH##
PUSHJ P,PRCORE ;REPORT IT
MOVEI T2,MINMAX##
SETIOK: CAMGE T2,CORMAX## ;DECREASING?
PUSHJ P,CHKMAX ;YES. CHECK JOB SIZES
MOVEM T2,CORMAX## ;SAVE NEW VALUE
LSH T2,W2PLSH## ;REDUCE TO N
HRRM T2,CORLIM## ;SAVE IN RH(CORLIM)
JRST CPOPJ1## ;AND SKIP RETURN
CHKMAX: PUSHJ P,SAVE3## ;SEE IF NEW CORMAX
SETZ P1,0 ;IS TOO SMALL FOR
PUSH P,J ;JOBS NOW RUNNING
MOVE P2,T2 ;SAVE DESIRED NEW VALUE
MOVEI J,1 ;SCAN ALL JOBS
CHKMX1: MOVE T2,JBTSTS##(J) ;DON'T COUNT LOCKED JOBS
TLNE T2,NSHF!NSWP
TDZA T2,T2 ;THIS JOB IS LOCKED
PUSHJ P,SEGSIZ ;GET LOW SEG SIZE
PUSH P,J ;SAVE JOB #
SKIPG J,JBTSGN##(J) ;GET ITS HISEG (IF ANY)
JRST CHKMX2 ;NONE
MOVSI T3,NSWP!NSHF
TDNE T3,JBTSTS##(J) ;HISEG LOCKED?
JRST CHKMX2 ;YES
MOVE P3,T2 ;SAVE LOW SEG SIZE
PUSHJ P,SEGSIZ ;GET HISEG SIZE
ADDI T2,(P3) ;TOTAL
CHKMX2: LSH T2,P2WLSH## ;TOTAL WORDS
CAMLE T2,P1 ;BIGGEST SO FAR?
MOVE P1,T2 ;YES
POP P,J ;GET BACK JOB #
CAMGE J,HIGHJB ;ALL JOBS SCANNED?
AOJA J,CHKMX1 ;NO
CAMG P1,P2 ;BIGGEST JOB FIT NEW CORMAX?
JRST CHKMX3 ;YES. OK AS IS
MOVE P2,P1 ;NO. ADJUST REQUEST
JUMPGE M,CHKMX3
PUSHJ P,INLMES
ASCIZ /
%Too small for current job(s)-/
MOVE T1,P2 ;GET SIZE OF LARGEST JOB
LSH T1,W2PLSH##
PUSHJ P,PRCORE ;REPORT IT
CHKMX3: MOVE T2,P2
JRST JPOPJ##
IFN FTLOCK,<
SETMIN: PUSHJ P,CORLGL ;GET DECIMAL ARG IF LEGAL
SETMN1: CAMLE T2,CORMAX## ;CORMIN CAN'T
MOVE T2,CORMAX## ;EXCEED CORMAX
MOVEM T2,CORMIN## ;SET NEW VALUE IN CORMIN
JRST CPOPJ1## ;AND SKIP RETURN
>
;SUBROUTINE TO GET CORE ARGUMENT AND CHECK FOR LEGALITY
; DOES NOT RETURN IF NOT LEGAL
CORLGL::
IFN FTLOGIN,<
PUSHJ P,SETLGL ;TEST FOR LEGALITY
JRST COMERP ;NOT LEGAL
>
PUSHJ P,CORARG ;GET THE CORE ARGUMENT
JRST NOTENP ;NOT ENOUGH ARGUMENTS
AOS T2,T1 ;CONVERT TO NUMBER OF WORDS
POPJ P, ;RETURN
;SUBROUTINE TO TEST FOR LEGALITY, RETURN NEXT TYPED ARGUMENT IF LEGAL
;DOES NOT RETURN IF NOT LEGAL
DECLGL::
IFN FTLOGI,<
PUSHJ P,SETLGL ;TEST FOR LEGALITY
JRST COMERP ;NOT LEGAL
>
DECLG1: PUSHJ P,DECIN1 ;LEGAL - GET DECIMAL NUMBER
PJRST NOTENP ;NOT ENOUGH ARGS
PJRST COMERP ;NOT A NUMBER
POPJ P, ;OK - RETURN
;STILL IN FTSET CONDITIONAL
IFN FTMONL!FTMOFFL,<
;HERE TO SET MEMORY ON OR OFF LINE
SETMEM::PUSHJ P,SETLGL ;MUST BE PRIVILEGED
JRST COMERA ;NOT PRIVLEGED, LOSE
; PUSHJ P,SAVE2##
PUSHJ P,CTEXT ;GET MODIFIER
JUMPE T2,NOTENF ;MUST BE ONE
MOVE T1,[-2,,[SIXBIT /ON/
SIXBIT /OFF/]]
PUSHJ P,FNDNAM ;LOOK FOR EITHER "ON" OR "OFF"
JRST COMERA ;IF NEITHER, LOSE
MOVE P1,T1 ;REMEMBER WHETHER HE SAID ON OR OFF
PUSHJ P,SKIPS1 ;SKIP SPACES, TABS, ETC.
JFCL ;IGNORE NON-SKIP RETURN
CAIN T3,"-" ;ALLOW "-LINE"
PUSHJ P,COMTYS ;IF A MINUS SIGN WAS TYPED, SKIP IT
MOVE T1,[-2,,[SIXBIT /LINE/
SIXBIT /FROM/]]
PUSHJ P,TXTARG ;ALLOW NOISE WORDS
JRST SETME1 ;NONE WAS TYPED
JUMPN T1,SETME1 ;SKIP ON IF "FROM" WAS TYPED
MOVE T1,[-1,,[SIXBIT /FROM/]]
PUSHJ P,TXTARG ;"LINE" WAS TYPED, EAT "FROM" IF ITS THERE
JFCL ;DON'T CARE WHETHER IT WAS ON NOT
SETME1: PUSHJ P,DECIN1 ;READ AN ARGUMENT (DEFAULT IS DECIMAL)
JRST NOTENF ;THERE MUST BE ONE
PUSHJ P,[CAIE T3,"K" ;NUMBER ENDED WITH A NON-DIGIT,
CAIN T3,"P" ; WAS IT "P" OR "K"?
CAIA ;YES
JRST COMERP ;NO, COMPLAIN
MOVEI T1,P2WLSH##
CAIE T3,"P" ;ARGUMENT SPECIFIED IN PAGES?
MOVEI T1,K2WLSH##
LSH T2,(T1) ;CONVERT TO WORDS
JRST COMTYS] ;AND EAT THE "P" OR "K"
MOVE P2,T2 ;SAVE THE LOWER BOUND
MOVE T1,[-1,,[SIXBIT /TO/]]
PUSHJ P,TXTARG ;ALLOW THE NOISE WORD "TO"
JFCL ;DON'T CARE IF IT ISN'T THERE
PUSHJ P,DECIN1 ;READ THE SECOND ARGUMENT
JRST NOTENF ;THERE MUST BE ONE
PUSHJ P,[PUSHJ P,[CAIE T3,"K"
CAIN T3,"P" ;ONCE AGAIN, ALLOW ARGUMENT TO BE
CAIA ; QUALIFIED BY "P" OR "K"
JRST COMERP ;HOWEVER, NOTHING ELSE WILL DO
MOVEI T1,P2WLSH##
CAIE T3,"P" ;PAGES?
MOVEI T1,K2WLSH##
LSH T2,(T1) ;CONVERT TO WORDS
JRST COMTYS] ;AND THROW AWAY THE CHARACTER
SOJA T2,CPOPJ]
;STILL IN FTMONL, FTMOFFL, FTSET CONDITIONAL
CAMG P2,T2 ;FIRST ARGUMENT MUST BE .LT. THE SECOND
CAIE T3,12 ;AND THE LINE MUST BE PROPERLY TERMINATED
JRST COMERA ;GRUMBLE
MOVE T1,P2 ;RESTORE FROM ARGUMENT
TRZ T1,PG.BDY## ;ROUND TO A PAGE BOUNDARY
TRZ T2,PG.BDY## ; ..
ADDI T2,PAGSIZ## ;ROUND UP
LSHC T1,W2PLSH## ;CONVERT FROM WORDS TO PAGES
;HERE T1 = LOWEST PAGE NUMBER (K NUMBER) OPR TYPED
; T2 = HIGHEST PAGE NUMBER (K NUMBER) + 1 OPR TYPED
;P1 = 0 IF SET MEMORY ON LINE
;P1 = 1 IF SET MEMORY OFF LINE
;DISPATCH TO ROUTINE TO SET MEMORY ON OR OFF LINE
JUMPE P1,MEMONL## ;GO SET THE MEMORY IN THE SPECIFIED RANGE ON-LINE
IFE FTMOFFL,<
JRST COMERA ;ERROR IF NOT SUPPORTED
>
;STILL IN FTMONL, FTMOFFL, FTSET CONDITIONAL
IFN FTMOFFL,<
SKIPN [LOKINC##] ;MUST HAVE THE LOCK UUO TO SET MEMORY OFF
JRST COMERA ;ERROR IF KILOCK NOT LOADED
PUSHJ P,CKMOL## ;CHECK THAT RANGE DOESN'T OVERLAP THE MONITOR
JRST SETME6 ;IT DOES SO WE CAN'T DO IT
SETME2: PUSH P,T1 ;SAVE LOWER BOUND
PUSH P,T2 ;AND UPPER BOUND
MOVEI P1,[ASCIZ /?Job(s) to big to continue to run/]
PUSHJ P,NEWCMX## ;SEE IF ALL JOBS CAN CONTINUE TO RUN
JUMPLE T1,[POP P,(P) ;IF .LE. 0, TRYING TO SET MONITOR MEMORY OFF LINE
POP P,(P)
JRST SETME6];GO EXPLAIN THE PROBLEM
PUSH P,J ;SAVE J FOR COMRET
MOVEI J,0 ;STARTING WITH JOB 0,
SETME3: PUSHJ P,JBSTBG## ;MAKE SURE ALL JOBS CAN STILL RUN (I.E., NONE IS TOO BIG)
JRST SETME4 ;NONE ARE
PUSHJ P,MOLMS ;TELL THE OPR ABOUT THIS JOB
JRST SETME3 ;AND LOOK FOR MORE THAT ARE TOO BIG
SETME4: JUMPE P1,SETME7 ;EXIT IF SOME JOBS WERE TO BIG
MOVEI P1,[ASCIZ /?Attempt to set memory containing locked jobs off-line/]
MOVEI J,0 ;STARTING WITH JOB 0,
MOVE T1,-2(P) ;LOWER BOUND,
SETME5: MOVE T2,-1(P) ;UPPER BOUND,
PUSHJ P,CKLJB## ;SEE IF RANGE OVERLAPS SOME LOCKED JOB
JRST SETME7 ;IT DOESN'T SO ALL IS WELL
PUSHJ P,MOLMS ;TELL THE OPR ABOUT THIS JOB
JRST SETME5 ;AND LOOP TO SEE IF THERE ARE ANY MORE IN THE WAY
SETME6: JSP T1,ERRMES ;PRINT THE ERROR MESSAGE
ASCIZ /Attempt to set monitor memory off-line/
SETME7: POP P,J ;RESTORE J FOR COMRET
POP P,T2 ;RESTORE UPPER BOUND
POP P,T1 ;AND LOWER BOUND
JUMPE P1,PCRLF ;EXIT IF THERE WAS AN ERROR
PJRST MEMOFL## ;GO SET THE MEMORY OFF-LINE
MOLMS: PUSH P,T1 ;SAVE T1
SKIPE T1,P1 ;SKIP IF ERROR MESSAGE WAS ALREADY TYPED
PUSHJ P,CONMES ;TYPE THE ERROR MESSAGE
MOVEI T1,[ASCIZ/
?Problem with job(s)/]
SKIPE P1 ;SAY PROBLEM WITH JOBS ONCE
PUSHJ P,CONMES ;TYPE THAT
MOVEI P1,0 ;FLAG AN ERROR AND DON'T PRINT ERROR HEADING TWICE
TLO M,ERRMES ;TELL COMRET THAT THERE WAS AN ERROR
PUSHJ P,PRJBNM## ;DISPLAY INFO. ABOUT THE PROBLEM JOB
JRST TPOPJ## ;RESTORE T1, AND RETURN
>;END FTMOFFL CONDITIONAL
>;END FTMONL, FTMOFFL CONDITIONAL
;STILL IN FTSET CONDITIONAL
SUBTTL SET COMMAND AND UUO -- DAYTIME AND SCHED
IFN FTSEDAT,<
SETDAY: PUSHJ P,DECLGL ;GET DECIMAL TIME IF LEGAL
SETDA1: IDIVI T2,^D100 ;HOURS INTO T2
MOVEM T3,LOCMIN##
MOVEM T2,LOCHOR##
SETZM LOCSEC## ;ZERO SECOND COUNTER
IMULI T2,^D60 ;CONVERT HOURS TO MINS
ADD T2,T3 ;+ORIGINAL MINS
IMUL T2,TICMIN## ;CONVERT TO JIFFIES
MOVEM T2,TIME## ;SAVE AS NEW TIME
MOVEM T2,TIMLST##
PJRST SETDT2 ;FIXUP 'DATE' & SKIP RETURN
>
SETSCD:
IFN FTLOGI,<
PUSHJ P,SETLGL ;CHECK FOR LEGALITY
JRST COMERA ;NOT LEGAL
>
PUSHJ P,OCTIN1 ;OK - GET OCTAL NUMBER
PJRST NOTENF ;NOT ENOUGH ARGS
PJRST COMERA ;ILLEGAL NUMBER
SETSC1: HRRM T2,STATES## ;SAVE NUMBER
JRST CPOPJ1## ;AND SKIP RETURN
IFN FTTLIM,<SETIM1: IMUL T2,TICSEC## ;CONVERT TO JIFFIES
JRST SETIM2 ;GO STORE
SETIME: PUSHJ P,DECIN1 ;GET DECIMAL NO OF SECS
PJRST NOTENF ;NOT ENOUGH ARGS
PJRST COMERA ;NOTA NUMBER
IMUL T2,TICSEC## ;CONVERT TO JIFFIES
TLNE T2,(-JB.LTM-1) ;SEE IF TOO BIG
PJRST COMERA ;YES. ERROR
MOVEI T1,BATMSG
LDB T3,JBYLTM##
JUMPE T3,SETIM2
MOVE T3,JBTLIM##(J)
TLNE T3,(JB.LBT)
JRST ERRMES
SETIM2: DPB T2,JBYLTM##
JRST CPOPJ1## ;AND RETURN
>
SUBTTL SET COMMAND AND UUO -- OPR, LOGMIN&MAX BATMIN&MAX
SETOPR:
IFN FTLOGI,<
PUSHJ P,SETLGL ;SEE IF SET OPR LEGAL
JRST COMERA ;NOT LEGAL
>
PUSHJ P,CTEXT1 ;GET NAME OF DEVICE
MOVE T1,T2 ;MOVE FOR STDOPR
PUSHJ P,STDOPR## ;SET IT
PJRST COMERA ;NO GOOD
POPJ P,0 ;GOOD
SETOP1: HRR M,T2 ;UUO, GET ADDRESS
PUSHJ P,GETWDU## ;GET CONTENTS IF LEGAL
SETOP2: PUSHJ P,STDOPR## ;CHANGE DEVICE
POPJ P,0 ;ERROR RETURN
JRST CPOPJ1## ;GOOD RETURN
;LOGIN CONTROL PARAMETERS
SETLMX: CAIL T2,1 ;LOGMAX MUST BE .GE. 1
CAILE T2,M.JOB## ; AND .LE. M.JOB
POPJ P,
MOVEM T2,LOGMAX##
JRST CPOPJ1##
SETBMX: CAIL T2,0 ;BATMAX MUST BE .GE. 0
CAILE T2,15 ; AND .LE. 15
POPJ P,
MOVEM T2,BATMAX##
JRST CPOPJ1##
SETBMN: CAIL T2,0 ;BATMIN MUST BE .GE. 0
CAMLE T2,BATMAX## ; AND .LE. BATMAX
POPJ P,
MOVEM T2,BATMIN##
JRST CPOPJ1##
;STILL IN FTSET CONDITIONAL
SUBTTL SET COMMAND AND UUO -- WATCH
IFN FTWATCH,<
SETWAT: PUSHJ P,SAVE1## ;SAVE P1
MOVE P1,[IORM T2,JBTWCH##(J)] ;WE'RE CHANGING JBTWCH(J)
PUSHJ P,CTEXT ;GET 1ST ARG
JUMPE T2,WATLP1 ;ERROR IF MISSING
SKIPA T1,[-WATLEN-NOTLEN,,WATTAB] ;SCAN BOTH TABLES 1ST TIME
WATLOP: MOVE T1,[-WATLEN,,WATTAB] ;POINT TO TABLE
PUSHJ P,FNDNAM ;LOOK FOR ABBREV.
JRST WATLP1 ;ERROR
CAIL T1,NOTTAB-WATTAB ;SEE IF IN NOTTAB
JRST WATCH2 ;YES, MUST BE NO, ALL, NONE
MOVNI T1,(T1) ;-NO. OF ENTRY IN TABLE
MOVSI T2,JW.WDY ;FIRST BIT
ROT T2,(T1) ;ROTATE RIGHT TO PROPER POSITION
WATCH1: XCT P1 ;ANDCAM OR IORM T2,JBTWCH(J)
PUSHJ P,CTEXT ;GET NEXT ARG
JUMPE T2,CPOPJ## ;0 IF FINISHED OR NONE
JRST WATLOP ;AND SET A BIT FOR IT
WATCH2: SUBI T1,WATLEN ;RELATIVE TO NOTTAB
TRNN T1,1 ;NO OR NONE?
HRLI P1,(ANDCAM T2,(J)) ;YES
MOVSI T2,WCHALL ;READY FOR ALL,NONE
JUMPN T1,WATCH1 ;YES IT IS
PUSHJ P,CTEXT ;GET ARG OF NO
JUMPN T2,WATLOP ;SEE IF VALID
WATLP1: JSP T1,ERRMES ;NO, TELL USER THE LEGAL ONES
ASCIZ /Args are: day,run,wait,read,write,version,mta,all,none/
$LOW
WATTAB::<SIXBIT /DAY/>
<SIXBIT /RUN/>
<SIXBIT /WAIT/>
<SIXBIT /READS/>
<SIXBIT /WRITES/>
<SIXBIT /VERSION/>
<SIXBIT /MTA/>
;ADD NEW ITEMS HERE AND IN ERROR COMMENT AND IN S.MAC
WATLEN==.-WATTAB
WTCMXL==:<WATLEN-1>B26
> ;END FTWATCH
IFN FTWATCH!FTSPL,<
;THIS TABLE MUST BE IN ORDER NO, ALL, NONE
;AND MUST FOLLOW WATTAB IF FTWATCH IS NON-ZERO
NOTTAB: <SIXBIT /NO/>
<SIXBIT /ALL/>
<SIXBIT /NONE/>
NOTLEN==.-NOTTAB
$HIGH
> ;END FTWATCH!FTSPL
;STILL IN FTSET CONDITIONAL
SUBTTL SET COMMAND AND UUO -- DATE
IFN FTSEDAT,<
SETDAT: PUSHJ P,SETLGL ;TEST FOR LEGALITY
JRST COMERA ;NOT PRIVILEGED
MOVEI T1,LOCYER##
PUSHJ P,GTDATE ;ACCEPT E.G. 3-JAN-72
JRST COMERR ;BAD DATA
SETDT2: AOS (P) ;SKIP RETURN
PUSH P,DATE ;SAVE OLDDAE
PUSHJ P,SUDATE## ;RECOMPUTE UNIV. DATE
POP P,T1 ;GET OLD DATE BACK
SUB T1,DATE## ;SUBTRACT NEW FROM OLD
MOVNS T1 ;MAKE IT ADDITIVE
MOVE T2,HIGHJB## ;GET HIGHEST JOB ASSIGNED
SETDT3: SKIPE JBTJLT##(T2) ;ANYTHING THERE?
ADDM T1,JBTJLT##(T2) ;YES, ADJUST IT
SOJG T2,SETDT3 ; AND LOOP
IFN FTDAEM&FTACCT,<
HRRZ U,T1 ;TIME PART
HLRZ F,T1 ;DATE PART
MOVEI T1,.ERDTC ;DATE OR TIME CHANGE
PUSHJ P,DAERPT## ;TELL DAEMON
>
IFN FTKL10,<
PUSHJ P,THSDA## ;RECOMPUTE 12 BIT DATE
PJRST COMSDT## ;TELL ANY FRONT ENDS THAT NEED TELLING
; ABOUT NEW DATE. COUNT ON SET DAYTIME
; GETTING HERE WITH NEW TIME ALSO.
>;END IFN FTKL10
IFN FTKA10!FTKI10,<
PJRST THSDA## ;RECOMPUTE 12 BIT DATE AND RETURN
>;END IFN FTKA10!FTKI10
SETDT1: IDIVI T2,^D31 ;DECOMPOSE 12 BIT DATE INTO LOCYER...
AOS T3
MOVEM T3,LOCDAY##
IDIVI T2,^D12
AOS T3
MOVEM T3,LOCMON##
ADDI T2,^D1964
MOVEM T2,LOCYER##
JRST SETDT2 ;GO MAKE & STORE THSDAT & DATE
>
IFN FT5UUO,<
SETKSY: MOVEM T2,SYSKTM## ;STORE VALUE FOR CLOCK1
JRST CPOPJ1## ;RETURN
>
;STILL IN FTSET CONDITIONAL
SUBTTL SET COMMAND AND UUO -- SPOOL
IFN FTSPL,<
SETSPL: PUSHJ P,SAVE2## ;SAVE P1
MOVE P1,[IORM T2,JBTSPL##(J)] ;WE'RE CHANGING JBTSPL
PUSHJ P,CTXDEV ;GET 1ST ARG
JUMPE T2,NOTENF ;NOT ENOUGH ARGS
MOVE T1,[-NOTLEN,,NOTTAB]
PUSHJ P,FNDNAM ;SEE IF NO. ALL, NONE
JRST SETSP0 ;NO, SEE IF DEVICE
TRNN T1,1 ;IS IF NO OR NONE
HRLI P1,(ANDCAM T2,(J)) ;YES, TURN OFF BIT
JUMPN T1,SETSP3 ;ALL OR NONE?
PUSHJ P,CTXDEV ;NO, GET ARG FOR NO
JUMPE T2,NOTENF ;NOT ENOUGH ARGS
SETSP0: MOVEI F,SPLTAB## ;POINT TO SPOOL TABLE
TRNN T2,-1 ;DID HE SPEC A PHYS DEV?
JRST SETSP1 ;NO ALL IS OK
JSP T1,ERRMES ;YES, GIVE A MESSAGE
ASCIZ /Cannot spool a physical device
/
SETSP1: CAMN T2,SPLNAM##(F) ;HATCH?
JRST SETSP2 ;YES!
ADDI F,SPLLEN## ;BUMP TO NEXT CARRY
CAIGE F,SPLTOP## ;DONE?
JRST SETSP1 ;NO, LOOP
JSP T1,ERRMES ;YES, NOT FOUND
ASCIZ /Not a spoolable device
/
SETSP2: HRRZ T2,SPLBIT##(F) ;GET THE SPOOL BIT
SKIPA ;SKIP ALTERNATE ENTRY
SETSP3: MOVEI T2,.SPALL ;ALL OR NONE
TLNE P1,20000 ;P1 AN ANDCAM?
JRST SETSP4 ;NO - ALWAYS ALLOWED TO SET SPOOLING
MOVSI T3,PVNSPL ;NO, IS JOB ALLOWED TO UNSPOOL?
TDNN T3,JBTPRV##(J)
;NOTE THIS CODE DEPENDS ON PVNSPL=ST.NSP
IFN PVNSPL-ST.NSP,<PRINTX ST.NSP DOESN'T=PVNSPL>
TSNE T3,STATES##
JRST SETSP4 ;YES - OK
PUSHJ P,PRVJ ;OR FFAPPN?
JRST SETSP4 ;YES
JSP T1,ERRMES ;NO - TYPE THE MESSAGE:
ASCIZ /No privs to unspool
/
SETSP4: XCT P1 ;TURN ON/OFF SPOOL BIT(S)
MOVE F,LDBDDB##(U) ; AND F
PUSHJ P,CTXDEV ;GET NEXT DEV
SKIPN T2 ;ANYTHING THERE?
POPJ P, ;NO, RETURN
JRST SETSP0 ;AND SET ITS BIT
;STILL IN FTSPL CONDITIONAL
;STILL IN FTSET CONDITIONAL
SUBTTL SET COMMAND AND UUO -- DEFER/NODEFER
IFN FTGALAXY,<
;ENTER HERE ON SETUUO
SETDFU: JUMPE T2,SETNDC ;ZERO MEANS NO-DEFERED
; ELSE FALL INTO DEFER
;ENTER HERE ON SET DEFER COMMAND
SETDFC: MOVEI T2,JB.DFR ;GET DEFER BIT
IORM T2,JBTSPL##(J) ;SET IT
JRST CPOPJ1## ;RETURN
;ENTER HERE ON SET NODEFER COMMAND
SETNDC: MOVEI T2,JB.DFR ;GET DEFER BIT
ANDCAM T2,JBTSPL##(J) ;CLEAR IT
JRST CPOPJ1## ;RETURN
>;END INF FTGALAXY
;STILL IN FTSPL CONDITIONAL
;STILL IN FTSET CONDITIONAL
SUBTTL SET COMMAND AND UUO -- DEFAULTS
SETDFL: PUSHJ P,CTEXT ;GET DEFAULT ARGEMENT MODIFIER
JUMPE T2,NOTENF ;MUST BE ONE
MOVE T1,[-DFLTTL,,DFLTTB] ;ARGUMENT FOR FNDNAM
PUSHJ P,FNDNAM ;SEE IF A LEGAL MODIFIER WAS SPECIFIED
JRST COMERA ;BAD ARGUMENT
JRST @DFLCTB(T1) ;DISPATCH TO SET THE DEFAULT
;HERE ON SET DEFAULT UUO
SETDLU: HRR M,T2 ;ADDRESS OF FUNCTION CODE
PUSHJ P,GETWDU## ;GET THE FUNCTION CODE
HLRZ T2,T1 ;NUMBER OF ARGUMENTS
HRRZS T1 ;FUNCTION CODE
CAILE T1,DFLUTL ;IS IT A DEFINED FUNCTION CODE?
POPJ P, ;NO, ERROR RETURN
JRST @DFLUTB(T1) ;DISPATCH TO SET THE DEFAULT
DEFINE NAMES<
C PROTECTION,DFLPRT
>
DEFINE C(A,B,D,E)<
IFNB<E>,<E:>
<SIXBIT /A/>
>
XALL
DFLTTB: NAMES
DFLTTL==.-DFLTTB
DEFINE C(A,B,D,E)<
Z B (D)
>
DFLCTB: NAMES
DFLUTB: EXP DFLPRU
DFLUTL==.-DFLUTB-1
;HERE ON SET DEFAULT PROTECTION COMMAND
DFLPRT: MOVE T1,[-2,,[SIXBIT /ON/
SIXBIT /OFF/]]
PUSHJ P,TXTARG ;WAS "ON OR OFF" TYPED?
JRST DFLPR0 ;NO
JUMPE T1,DFLPR1 ;JUMP IF ON WAS TYPED
MOVSI T1,(PD.DPS) ;YES, CLEAR THE BIT WHICH SAYS
ANDCAM T1,.PDDFL##(W) ; DEFAULT PROTECTION WAS SET
POPJ P, ;AND RETURN
DFLPR0: PUSHJ P,SKIPS1 ;SKIP BLANKS, TABS, ETC.
JFCL ;IGNORE
CAIN T3,074 ;WAS A BRACKET TYPED ?
PUSHJ P,COMTYS ;YES, FLUSH IT.
PUSHJ P,OCTIN1 ;READ THE PROTECTION VALUE
JRST NOTENF ;IT MUST BE THERE
JRST COMERA ;ILLEGAL CHARACTER
TDNE T2,[-1,,777000] ;LEGAL PROTECTION VALUE ?
JRST COMERA ;NO, COMPLAIN
.DPB T2,PDYDPT## ;STORE DEFAULT PROTECTION
JRST DFLPR1 ;AND INDICATE A DEFAULT WAS SPECIFIED
;HERE ON SET DEFAULT PROTECTION UUO
DFLPRU: PUSHJ P,GETWD1## ;GET THE PROTECTION VALUE
TDNE T1,[-1,,777000] ;LEGAL ?
POPJ P, ;NO, ERROR RETURN
.DPB T1,PDYDPT## ;STORE DEFAULT PROTECTION
DFLPR1: MOVSI T1,(PD.DPS) ;DEFAULT PROTECTION SPECIFIED BIT
IORM T1,.PDDFL##(W) ;LITE THAT
JRST CPOPJ1 ;AND GIVE GOOD RETURN
SUBTTL SET COMMAND AND UUO -- CDR
;ENTER HERE ON SET CDR UUO
SETSPI: HRLOS T2 ;GET NAME, -1
AOSA (P) ;AND SKIP COMMAND ENTRY AND FORCE SUCCESS RETURN
;SET CDR COMMAND
SETCDR: PUSHJ P,CTEXT1 ;GET FILE NAME
JUMPE T2,NOTENF ;NONE SPECIFIED
HLLM T2,JBTSPL##(J) ;SAVE NAME
POPJ P, ;AND RETURN
;HERE TO SET SPOOL BITS BY UUO
SETSPB:
IFN FTPRV,<
SETCM T3,T2 ;-BITS HE WANTS ON
ANDI T3,.SPALL
TDNN T3,JBTSPL##(J) ;CLEARING SOME BITS FROM JBTSPL?
JRST SETSPC ;NO - OK
MOVSI T3,PVNSPL ;YES. IS HE ALLOWED?
TDNN T3,JBTPRV##(J)
;NOTE THIS CODE DEPENDS ON PVNSPL=ST.NSP
IFN PVNSPL-ST.NSP,<PRINTX ST.NSP DOESN'T=PVNSPL>
TSNE T3,STATES##
JRST SETSPC ;YES. GO DO IT.
PUSHJ P,PRVJ ;NO. SEE IF PRIV. JOB
JRST SETSPC ;YES. GO DO IT.
POPJ P,0 ;NO. FAILURE RETURN
> ;END CONDITIONAL ON FTPRV
SETSPC: DPB T2,[POINT 5,JBTSPL##(J),35] ;YES, DO IT
JRST CPOPJ1## ;SUCCESS RETURN
> ;END CONDITIONAL ON FTSPL
;STILL IN CONDITIONAL ON FTSET
IFN FTDBAD!FTCAFE!FTDAS78!FTNET,<
DSKSIL: PUSHJ P,SETLGL ;LEGAL?
JRST COMERA ;NO
PUSHJ P,CTEXT1 ;YES, GET DRIVE NAME
MOVE T1,T2 ;INTO T1
IFN FTCAFE!FTDAS78!FTNET,<
CAMN T2,[SIXBIT 'PDP11'] ;DOES HE WANT TO STOP PDP-11 MESSAGE?
PJRST D76SIL## ;YES--GO SHUT HIM UP
>
PUSHJ P,TPMSIL## ;SEE IF A TAPE KONTROLLER
PJRST CPOPJ1## ;YES - EXIT
IFN FTDBAD,<
PUSHJ P,DSKQUI## ;STOP MESSAGES FOR THIS DRIVE
JRST COMERA ; NO SUCH UNIT, OR WRONG STATUS
PJRST CPOPJ1## ;OK
>
>
SUBTTL SET COMMAND AND UUO -- DISK STUFF
IFN FTDPRI,<
;SET DSKPRI N
DSKPRI: TLZA P4,-1 ;CLEAR LH(P4)
DSKPR2: TLO P4,-1 ;MINUS, SET LH(P4)=-1
PUSHJ P,SKIPS ;GET FIRST CHAR
JRST NOTENF
CAIN T3,"-" ;-?
JUMPE T2,DSKPR2 ;YES, SET LH(P4), TRY AGAIN
PUSHJ P,DECIN1 ;NO, GET THE NUMBER
JRST NOTENF
JRST COMERA
SKIPGE P4 ;- SEEN?
MOVNS T2 ;YES
PUSHJ P,PRICOM## ;CALL FILSER TO CHECK PRIUS
SKIPA
POPJ P,
>
IFN FTDPRI!FTHPQ,<
PRIERR::JSP T1,ERRMES
ASCIZ /NO PRIVS TO SET PRIORITY THAT HIGH
/
>;END FTDPRI!FTHPQ
;SET DSKFUL PAUSE (ERROR)
FULSTP: PUSHJ P,CTEXT
MOVE T1,[-2,,STPNST] ;LOOK AT ARGUMENT
PUSHJ P,FNDNAM
PJRST COMERA
STPSET: MOVEI T2,JS.SFL
XCT STPXCT(T1) ;TURN THE PAUSE-BIT ON OR OFF
PJRST CPOPJ1##
STPNST: SIXBIT /PAUSE/
SIXBIT /ERROR/
STPXCT: IORM T2,JBTSTS##(J)
ANDCAM T2,JBTSTS##(J)
;SET DSKFUL UUO (0=PAUSE, 1=ERROR, OTHER=READ)
DSKFUL: CAILE T2,1 ;SETTING?
JRST DSKFU1 ;NO
MOVE T1,T2 ;YES, T1=FUNCTION
JRST STPSET ;GO SET OR CLEAR THE BIT
DSKFU1: MOVEI T2,JS.SFL ;READING THE BIT
TDNE T2,JBTSTS(J) ;IS HE SET TO PAUSE?
TDZA T1,T1 ;NO - 0
MOVEI T1,1 ;YES - 7
PJRST STOTC1## ;STOTAC, THEN CPOPJ1
;UUO TO SET PROGRAM TO RUN
SETPGM:
IFN FTTLIM,<
PUSHJ P,PRVJ ;PRIV'D JOB?
JRST SETPG1 ;YES, ALLOW IT
MOVE T3,JBTLIM##(J)
TLNN T3,(JB.LBT) ; IN A BATCH JOB?
TLNN T3,(JB.LSY) ;FROM SYS: ?
POPJ P, ;NO, ERROR
> ;END OF FTTLIM
SETPG1: HRR M,T2 ;COPY ADDRESS
PUSH P,J
PUSHJ P,GETWDU## ;GET THE WORD
MOVE J,(P)
MOVEI T2,JS.RPC ;CLEAR BIT
ANDCAM T2,JBTST2##(J) ; ..
SKIPGE T1 ;WANT IT SET?
IORM T2,JBTST2##(J) ;YES
PUSHJ P,GETWD1## ;GET NAME
POP P,J
PUSHJ P,FNPDBS##
MOVEM T1,.PDPGM##(W)
JRST CPOPJ1##
SUBTTL SET COMMAND AND UUO -- ROUTINE TO READ DATE
> ;END CONDITIONAL ON FTSET
;GTDATE-ACCEPTS DATE IN FORM 21-JAN-72 OR
; JAN-21-72 OR 5-JAN OR JAN-5 GIVING
; CREATION YEAR AS DEFAULT
; STORES YEAR (E.G. 1972), MONTH (1-12), DAY (1-31) IN 3 WORD
; VALVE BLOCK POINTED TO BY T1.
;
;CALL T1:=ADDRESS
; PUSHJ P,GTDATE
; ERROR, RETURN
; SUCCESS RETURN
GTDATE::PUSHJ P,SAVE2## ;SAVE POINTER
MOVEI P1,2 ;SET LOOP COUNT
MOVE P2,T1
SETZM 1(P2) ;NO MONTH TYPED YET
DATE01: PUSHJ P,CTEXT ;READ NEXT ARGUMENT
MOVE T1,[-MLEN,,MONTHS]
PUSHJ P,FNDNAM ;SCAN FOR A MONTH
JRST GTDAY
ADDI T1,1 ;FORM MONTH INDEX
MOVEM T1,1(P2) ;STORE MONTH
SOJG P1,DATE01 ;LOOP IF DAY NEXT
JRST GTYEAR
GTDAY: JUMPN T1,CPOPJ## ;ERROR, AMBIGOUS MONTH
SETZM T3 ;CLEAR FOR SUM
DATE02: SETZ T1,
LSHC T1,6 ;GET NEXT DIGIT
JUMPE T1,DATE03 ;DONE, IT 0
TRC T1,20 ;FORM OCTAL REPRESENTATION
CAILE T1,^D9
POPJ P, ;NOT A DIGIT
IMULI T3,^D10
ADDI T3,(T1) ;FORM SUM
JRST DATE02
DATE03: SKIPN 1(P2) ;IF NO MONTH WAS TYPED,
MOVEM T3,1(P2) ; STORE IT AS MONTH ALSO SO OLD FORMAT WILL WIN
MOVEM T3,2(P2) ;STORE DAY
SOJG P1,DATE01 ;LOOP IF MONTH NEEDED
GTYEAR: PUSHJ P,DECIN ;GET YEAR (IF TYPED)
SKIPA T2,MONYER ;CREATION YEAR IF MONITOR
POPJ P, ;BAD TERMINATOR
CAIGE T2,^D100 ;IF JUST 2 CHAR'S TYPED
ADDI T2,^D1900 ; ADD 1900
MOVEM T2,(P2) ;STORE YEAR
JRST CPOPJ1## ;SUCCESS
DEFINE .MONTH (A),
<IRP A
<SIXBIT/A/>>
MONTHS: .MONTH<JANUAR,FEBRUA,MARCH,APRIL,MAY,JUNE,JULY,AUGUST,SEPTEM,OCTOBE,NOVEMB,DECEMB>
MLEN==.-MONTHS
MONYER: M.YEAR## ;YEAR OF MONITOR CREATION
SUBTTL SET COMMAND AND UUO -- ROUTINES TO PRINT WATCH INFO
;SUBROUTINE TO PRINT TIME OF DAY USER STARTS TO WAIT FOR RESPONSE
; IF HE HAS ENABLED IT WITH "WATCH DAY"
;CALL: MOVE J,JOB NO.
; PUSHJ P,WCHBEG
; ALWAYS RETURN HERE
;THIS SUBROUTINE IS ALWAYS CALLED FROM THE COMMAND DECODER
;WHEN USER IS ABOUT TO WAIT FOR A RESPONSE
IFN FTWATCH,<
WCHBEG: MOVE T2,JBTWCH##(J)
MOVE T1,TIME## ;TIME OF DAY IN JIFFIES
TLNE T2,JW.WWT
DPB T1,JBYWCH## ;STORE FOR JOB
TLNN T2,JW.WDY ;DOES USER WANT TO SEE THIS?
POPJ P, ;NO.
PUSHJ P,PRLBK ;YES, PRINT LEFT BRACKET
MOVE T1,TIME## ;TIME OF DAY IN JIFFIES
PUSHJ P,PRTIM ;PRINT HH:MM:SS(NO CRLF)
;FALL INTO PRRBKC
;SUBROUTINE TO PRINT RIGHT BRACKET,CRLF
> ;END FTWATCH
PRRBKC::PJSP T1,CONMES
ASCIZ /]
/
;SUBROUTINE TO PRINT LEFT BRACKET
PRLBK:: PJSP T1,CONMES
ASCIZ /[/
;SUBROUTINE TO PRINT RIGHT BRACKET
PRRBK:: PJSP T1,CONMES ;PRINT AND RETURN
ASCIZ /]/
;SUBROUTINE TO PRINT SYSTEM RESPONSE STATISTICS EACH TIME
;USER FINISHES WAITING FOR SYSTEM
;PRINT INCREMENTAL RUN TIME, WAIT TIME, # DISK BLKS READ, #DISK BLKS WRITTEN
;CALL: MOVE J,JOB NUMBER
; PUSHJ P,WCHEND
; ALWAYS RETURN HERE
IFN FTWATCH,<
WCHEND: MOVSI T1,JW.WRN!JW.WWT!JW.WDR!JW.WDW ;USER WANT ANY RESPONSE DATA?
TDNN T1,JBTWCH##(J) ; ..
POPJ P, ;NO.
PUSHJ P,SAVE1## ;SAVE P1
PUSHJ P,PRLBK ;YES, PRINT LEFT BRACKET
PUSHJ P,FNPDBS## ;FIND PDB ADDRESS. HALT IF NONE
MOVSI P1,-WCHLEN ;LOOP THRU ALL RESPONSE DATA ITEMS
WCHLOP: HLLZ T1,WCHTAB(P1) ;GET BIT ASSOCIATED WITH THIS FIELD
TDZE T1,JBTWCH##(J) ;DOES USER WANT TO WATCH IT?
PUSHJ P,@WCHTAB(P1) ;YES, PRINT IT OUT
AOBJP P1,WCH1 ;FINISHED ALL FIELDS?
PUSHJ P,PRSPC ;NO, PRINT A SPACE
WCH1: JUMPL P1,WCHLOP ;LOOP IF MORE BITS TO CONSIDER
PJRST PRRBKC ;APPEND RIGHT BRACKET, CRLF, AND RETURN
;TABLE OF ROUTINES TO PRINT RESPONSE DATA
WCHTAB:
IFN FTTIME,<
XWD JW.WRN,PRTWRN ;PRINT RUN TIME
XWD JW.WWT,PRTWWT ;PRINT WAIT TIME
>
IFN FTDISK&FTDSTT,<
XWD JW.WDR,PRTWDR## ;PRINT # DISK BLOCKS READ
XWD JW.WDW,PRTWDW## ;PRINT # DISK BLOCKS WRITTEN
>
;ADD NEW DATA HERE
WCHLEN==.-WCHTAB
> ;END FTWATCH
;ROUTINE TO PRINT INCREMENTAL RUNTIME(NO CRLF)
;CALL: MOVEI T1,0
; PUSHJ P,PRTWRN
IFN FTWATCH&FTTIME,<
PRTWRN: .EXCH T1,.PDRTM##(W) ;CLEAR INCREMENTAL RUN TIME
PJRST PRTIM ;PRINT AS HH:MM:SS, MM::SS OR SS.HH (NO CRLF)
;ROUTINE TO PRINT WAIT TIME (NO CRLF)
;CALL: PUSHJ P,PRTWWT
PRTWWT: LDB T1,JBYWCH## ;TIME OF DAY USER STARTED TO WAIT
SUB T1,TIME## ;-CURRENT TIME OF DAY = -WAIT TIME
SKIPLE T1 ;IS IT REALLY MINUS?
SUB T1,MIDNIT## ;NO. MUST HAVE BEEN WAITING ACROSS MIDNIGHT
; SO SUBTRACT A DAY TO GET IT NEGATIVE
MOVNS T1 ;NOW MAKE IT PLUS WAIT TIME
PJRST PRTIM ;TYPE OUT TIME (NO CRLF)
> ;END FTWATCH & FTTIME
IFN FTWATCH,<
SETWTU: HLRZ T1,JBTWCH##(J) ;GET CLOCK OVERFLOW
ANDI T1,77 ;(ENOUGH FOR 24.*60.*60.*60.)
TRZ T2,77 ;CLEAR REQUEST JUNK
IOR T2,T1 ;INCLUDE OVERFLOW
HRLM T2,JBTWCH##(J) ;SAVE WATCH BITS
JRST CPOPJ1## ;AND RETURN
>
IFN FTMTSET,<
MTADEN: PUSHJ P,MTFIND ;GET THE REST OF COMMAND AND FIND MTA DDB
JRST COMERR ;NOT NUMERIC
MOVE T1,[-DNTBLN,,DENTAB]
MOVE T3,0(T1) ;GET ENTRY FROM TABLE
CAIE T2,(T3) ;MATCH?
AOBJN T1,.-2 ;NO - TRY NEXT
JUMPGE T1,COMERA ;ERROR IF NONE FOUND
HLRZ T1,T3 ;GET CODE
DPB T1,TDYDN1## ;YES, STORE CODE IN DDB
JRST CPOPJ1## ;RETURN (SKIP)
MTABLK: PUSHJ P,MTFIND ;GET REMAINDER OF COMMAND AND FIND MTA DDB
JRST COMERR ;NOT NUMERIC
AOS T2 ;GET BLOCK SIZE +1
CAILE T2,NOISEW## ;LESS THAN NOISE RECORD?
CAIL T2,10000 ;NO, GREATER THAN BYTE SIZE?
JRST COMERR ;YES, ERROR
DPB T2,PBUFSZ## ;PUT IT IN DDB
JRST CPOPJ1## ;SKIP RETURN
IFN FTDX10,<
MTARTY: PUSHJ P,MTFIND ;GET REST OF COMMAND, SET UP F
HLRZS T2 ;NON-NUMERIC RETURN (NORMAL)
MOVSI T1,MTSNAR## ;NO AUTO-RECOVERY BIT
CAIN T2,'ON ' ;CLEAR OR SET IF 'ON' OR 'OFF'
JRST [ANDCAM T1,DEVIOS(F)
PJRST CPOPJ1##]
CAIE T2,'OF '
CAIN T2,'OFF'
JRST [IORM T1,DEVIOS(F)
PJRST CPOPJ1##]
JRST COMERR ;NOT A LEGAL ARGUMENT
>
MTFIND:
PUSHJ P,CTXDEV ;PICK UP DEVICE ARGUMENT
SKIPE T1,T2 ;DEVSRG EXPECTS NAME IN T1
PUSHJ P,DEVSRG## ;SEARCH FOR DDB
PJRST MTFERR ;NO SUCH DEVICE
LDB T1,PJOBN## ;GET OWNER'S JOB NUMBER
CAME T1,J ;US?
PJRST MTFERR ;NO, LOSE!
MOVE T1,DEVMOD(F)
MOVE U,TTYTAB##(J) ;RESTORE U
HRRZ U,DDBLDB##(U)
TLNN T1,DVMTA ;IS DEVICE A MAGTAPE?
PJRST COMERP ;NO, LOSE!
PUSHJ P,DECIN1 ;GET LAST ARGUMENT
PJRST NOTENP ;NO ARGUMENT FOUND
PJRST CTEXT1 ;NOT NUMERICAL, READ SIXBIT
JRST CPOPJ1 ;RETURN.
MTFERR: MOVE U,TTYTAB##(J) ;TTY DDB
HRRZ U,DDBLDB##(U) ;LDB BACK INTO LINE
PJRST COMERP ;TYPE ERROR MESSAGE
;TABLE OF VALID DENSITIES
DENTAB: RB.D2,,^D200
RB.D5,,^D556
RB.D8,,^D800
RB.D16,,^D1600
RB.D62,,^D6250
DNTBLN==.-DENTAB
> ;END CONDITIONAL ON FTMTSET
SUBTTL CONTINUE, CCONT AND JCONT
; "CONTC" - CONTINUE EXECUTION(TTY REMAINS IN COMMAND MODE)
CONTC: ;SAME AS CONT
; "CONT" - CONTINUE EXECUTION FROM WHERE LEFT OFF
CONT: JUMPE J,STARTE ;COMPLAIN IF NO JOB
TLNN P4,JERR ;IS JOB ERROR BIT SET?
POPJ P, ;COMMAND DECODER WILL DO THE REST
JSP T1,ERRMES ;YES, PRINT CANT CONTINUE
ASCIZ /Can't continue
/
IFN FTJCON,<
;JOB CONTINUE COMMAND
;FORCES A CONTINUE COMMAND FOR JOB Y
JCONT: PUSHJ P,GETJOB ;GET JOB TO CONTINUE
JRST NOTENF ;MUST HAVE ARGUMENT
TRNN T3,JDCON ;JOB WAITING FOR CONT?
JRST JCERR2 ;NO
CAMN T2,J ;SEE IF FOR US
PJRST FCONT ;YES, GO DO IT
MOVE T1,T2 ;GET JOB # IN CORRECT AC FOR FCONRQ
PUSHJ P,FCONRQ ;GO REQUEST CONT BE FORCED FOR JOB
POPJ P, ;RETURN - SUCCESSFUL
PJRST SNDBSI ;NOT ENTERED - GO TYPE "BUSY"
;STILL IN FTJCON CONDITIONAL
;CALLED TO SET UP FORCED COMMAND FOR JOB CONTINUE
;JOB NUMBER IN T1
;SKIP RETURN IF COMMAND WAS NOT ENTERED BECAUSE ALREADY A
;FORCED COMMAND PENDING
FCONRQ::MOVEI T2,TTFCXJ## ;INDEX FOR FORCED CONTINUE
> ;END CONDITIONAL ON FTJCON
IFN FTJCON!FT5UUO,<
;SUBROUTINE TO FORCE COMMAND
;ARGS T1=JOB NUMBER
; T2=INDEX OF FORCED COMMAND
COMFRC::PUSH P,U ;SAVE THIS AC
PUSH P,J ;SAVE THIS JOB NUMBER
MOVE J,T1 ;GET HIS JOB NUMBER
PUSHJ P,TTYSRC## ;SET UP LINE (LDB)
JRST JCONDM ;SEE IF ATTACHED
JUMPE U,JCONDM ;CAN'T FORCE TO DETACHED LINE
MOVE T1,T2 ;T1=COMMAND TO FORCE
MOVSI T2,LDBCMF## ;ANY FORCED COMMAND
IFN FTKL10,<
CONO PI,PIOFF## ;TEMPORARY TO GET AROUND PI SYSTEM BUS
CONO PI,SCNOFF##+PI.ON
>
IFE FTKL10,<
CONO PI,SCNOFF## ;TURN OF SCANNER PI
>
TDNE T2,(U) ;FOR THIS JOB ALREADY
JRST JCONDL ;YES
PUSHJ P,TTFORC## ;SET UP FORCED COMMAND
CONO PI,SCNON## ;SCANNER BACK ON
POP P,J ;RESTORE JOB
PJRST LPOPJ## ;RETURN
;HERE IF JOB ALREADY HAS FORCED COMMAND PENDING, DELAY THIS COMMAND
JCONDL: CONO PI,SCNON## ;SCANNER ON
JCONDM: POP P,J ;RESTORE JOB NUMER
JRST LPOPJ1## ;CAN'T ENTER - SKIP RETURN
> ;END CONDITIONAL ON FTJCON!FT5UUO
IFN FTJCON,<
;HERE IF JOB NOT WAITING FOR CONTINUE
JCERR2: JSP T1,ERRMES
ASCIZ /Job not waiting/
;FORCED CONTINUE COMMAND
;NO TTY OUTPUT UNLESS COMMAND IS REALLY EXECUTED - IT WILL NOT BE
; IF USER HAS TYPED A COMMAND IN THE MEAN TIME.
FCONT: MOVE P4,JBTSTS##(J) ;GET JOB STATUS
TLNN P4,JERR ;CAN WE CONTINUE
TRNN P4,JDCON ;IS JOB WAITING
POPJ P,
TLZ M,NOCRLF!NOMESS ;RESET NOMESS
TLO M,TTYRNW ;SET FOR RESCHEDULE
PUSHJ P,INLMES ;TELL USER HE'S CONT
ASCIZ /Cont by opr/
POPJ P,
> ;END CONDITIONAL ON FTJCON
SUBTTL CORE COMMAND
; "CORE #" - ASSIGNS #*1024 WORDS OF CORE TO JOB
; "CORE" WITH NO ARG. WILL PRINT NO OF FREE BLOCKS LEFT
; WITHOUT AFFECTING CURRENT ASSIGNMENT OF CORE
; JOB NOT IN MIDDLE OF SWAPPING
; EITHER ON DISK OR CORE OR NEITHER PLACE
CORE:
PUSHJ P,CORARG ;GET HIGHEST RELATIVE ADDRESS USER SPECIFIED
JRST COR3 ;NO ARG. SPECIFIED, JUST TYPE FREE BLOCK LEFT
JUMPL P4,[MOVEI T1,RUNERR ;RUNNING?
JRST ERRMES] ;YES, LOOSE
JUMPE T1,COR0 ;RELEASE DEVICES IF USER ASKING FOR 0 CORE
TRNE P4,JS.XO!JS.RUU ;SEE IF EXECUTE ONLY
PJRST ILLXO ;YES -- GO GIVE ERROR
IFN FT2REL,< SKIPE T2,TWOREG## ;SEE IF REENTRANT HARDWARE/SOFTWARE
SKIPLE T2,JBTSGN##(J) ;GET HI SEG # IF ANY
JUMPG T2,COR4 ;YES - GO COMPUTE LO SEG SIZE
COR5: ;RETURN WITH HIGHEST REL. ADDR. OF LO SEG
>
IFN FTVM,<
PUSH P,T1
SKIPN R,JBTADR##(J)
PUSHJ P,GETMIN
POP P,T1
JUMPN R,COR5A ;IF DIDN'T GET CORE IN CORE,
LDB T2,IMGOUT## ; DID!WE GET CORE ON DSK?
JUMPE T2,COR2 ;ERROR IF NONE
COR5A:
JUMPE R,DLYCM
>
PUSHJ P,CORE0## ;TRY TO ASSIGN CORE (NONE OR SPY)
JRST COR2 ;CORE NOT AVAILABLE, GO PRINT MESSAGE
LDB T1,PJBSTS##
CAIE T1,NULQ## ;IN THE NO CORE Q?
POPJ P, ;NO
MOVEI T1,STOPQ## ;YES, OK RETURN, CORE ASSIGNED ON DISK OR MEMORY
DPB T1,PJBSTS## ;PUT JOB IN THE STOP Q SINCE IT NOW HAS CORE
PJRST REQUE##
IFN FT2REL,<
COR4: HLRZ T2,JBTADR##(T2) ;GET HI SEG SIZE
SUBI T1,1(T2) ;COMPUTE LO SEG SIZE
JUMPGE T1,COR5 ;OK RETURN
PUSHJ P,INLMES ;TOO SMALL AN ARG.
ASCIZ /?Try larger arg.
/
>
COR2: MOVE U,-1(P) ;RESTORE TTY LDB ADDRESS
PUSHJ P,PRQM ;TYPE ? FOR BATCH
PUSHJ P,COR3
TLO M,ERRFLG ;SET ERROR FLAG
POPJ P,
IFE FTVM,<
COR3: PUSHJ P,PRTSEG ;PRINT SIZE OF LOW SEG
IFN FT2REL,<
PUSHJ P,PRTHGH## ;PRINT SIZE OF HIGH SEG (+0 IF NONE)
; NOTHING IF NOT 2 REG. MACHINE OR SOFTWARE
>
PUSHJ P,INLMES
ASCIZ "/"
IFE FTSWAP,<
MOVE T1,CORTAL## ;NO. OF FREE 1K BLOCKS
>
IFN FTSWAP,<
PUSHJ P,CORBND## ;PRINT MAX. NO. OF BLOCKS IN PHYSICAL CORE
LSH T1,W2PLSH## ;AVAILABLE TO A SINGLE USER(AS SET
; BY MONGEN, ONCE OR SET)
IFN FTKI10!FTKL10,<
ADDI T1,UPMPSZ##
>
>
PUSHJ P,RADX10## ;PRINT NO. OF 1K BLOCKS AVAILABLE
PUSHJ P,PRPORK ;PRINT "P" OR "K"
IFE FTSWAP,<
JSP T1,CONMES
ASCIZ / core
/
>
IFN FTSWAP,<
PUSHJ P,INLMES
ASCIZ / core
vir. core left=/
MOVE T1,VIRTAL## ;PRINT AMOUNT OF FREE SWAP SPACE LEFT
PUSHJ P,RADX10## ;PRINT DECIMAL
PUSHJ P,PRPORK ;LABEL IT AS PAGES OR K
PJRST PCRLF ;CRLF
>
> ;END FTVM
IFN FTVM,<
;HERE TO GIVE CURRENT CORE SIZE FOR VM USER
COR3: PUSHJ P,FNDPDS## ;FIND PDB FOR JOB
LDB T1,[POINT 10,.PDMVL##(W),17] ;GET MVPL
JUMPE T1,COR3B ;SKIP FIRST LINE IF ZERO
MOVEI T1,[ASCIZ "Virt. mem. assigned "]
PUSHJ P,CONMES ;PRINT TITLE
PUSHJ P,VMSIZE## ;GET SIZE OF JOB
JUMPE T2,[PUSHJ P,PRCORE ;IF JUST A LOWSEG
JRST COR3A]; PRINT ONLY 1 NUMBER
PUSH P,T2 ;SAVE SIZE OF HISEG
PUSHJ P,RADX10## ;PRINT SIZE OF LOWSEG
PUSHJ P,PRTPLS
POP P,T1 ;SIZE OF HISEG
PUSHJ P,PRCORE ;PRINT THAT
COR3A: HLRZ T4,.PDCVL##(W) ;GET CVPL
PUSHJ P,PRCXPL ;PRINT THAT
LDB T4,[POINT 10,.PDMVL##(W),17] ;GET MVPL
SKIPN T4
MOVEI T4,1000
PUSHJ P,PRMXPL ;PRINT THAT
PUSHJ P,INLMES ;ADD ) CRLF
ASCIZ /)
/
COR3B: PUSHJ P,INLMES
ASCIZ /Phys. mem. assigned /
PUSHJ P,PRTSEG ;PRINT LOWSEG SIZE
SKIPLE JBTSGN##(J) ;SKIP IF NO HISEG
PUSHJ P,PRTHGH## ;PRINT SIZE OF HISEG
PUSHJ P,PRPORK ;PRINT P OR K
HRRZ T4,.PDCVL##(W) ;GET CPPL
TRZN T4,400000
JRST [PUSHJ P,PRCPGL
JRST .+2]
PUSHJ P,PRCXPL ;PRINT IT
MOVEI T4,0
MOVSI P1,PHONLY
PUSH P,.PDCVL##(W)
MOVEI T1,400000
ANDCAM T1,.PDCVL##(W)
PUSHJ P,PRMXPL ;PRINT IT
POP P,.PDCVL##(W)
;CONTINUED ON NEXT PAGE
PUSHJ P,INLMES ;ADD NOISE WORDS
ASCIZ /)
Swap space left: /
MOVE T1,VIRTAL## ;GET THAT NUMBER
PUSHJ P,PRCORE ;PRINT IN RADIX 10
PJRST CRLF ;ADD IN A CRLF AND RETURN
;ROUTINE TO PRINT CURRENT AND MAX LIMITS
PRCPGL: MOVEI T1,[ASCIZ " (Guideline: "]
JRST PRXXPL
PRCXPL: SKIPA T1,[[ASCIZ " (Current limit: "]]
PRMXPL: MOVEI T1,[ASCIZ " Max limit: "]
PRXXPL: PUSH P,T4
PUSHJ P,CONMES ;PRINT THE TITLE
PUSHJ P,CORBND## ;GET MAX CORE
LSH T1,W2PLSH## ;IN PAGES
SKIPN (P) ;ANYTHING GIVEN?
MOVEM T1,(P) ;CHOOSE GOOD MAX
POP P,T1 ;RESTORE NUMBER
> ;END FTVM
PRCORE: PUSHJ P,RADX10## ;PRINT IN DECIMAL
PJRST PRPORK ;GIVE UNITS
IFN FTLOGIN&FTACCT,<
;ROUTINE TO PRINT ACCOUNT STRING
CACCT: MOVEI T1,.PDACS##(W) ;ADDRESS OF USER'S ACCOUNT STRING
PUSHJ P,CONMES ;TYPE IT
PJRST PCRLF ;<CRLF>
>
SUBTTL CONTROL-T PRINTOUT
IFN FTWATCH,<
;SUBROUTINE TO PRINT A 1 TO 3 LINE USE STATUS REPORT
;CALLED FROM USESTAT COMMAND IT PRINTS A 1 LINE
; STATUS REPORT OF THE FORM:
; INCREMENTAL DAY TIME
; INCREMENTAL RUN TIME
; INCREMENTAL DISK READS
; INCREMENTAL DISK WRITES
; PROGRAM NAME
; CORE SIZE
; JOB STATE
; PC
;
USECOM: TLNN P4,JNA ;IS THIS A JOB?
PJRST ATT4 ;NO--SAY "NOT A JOB"
MOVEI T1,[ASCIZ 'DAY: ']
PUSHJ P,CONMES
PUSHJ P,PRTWWT ;INCREMENTAL DAYTIME
MOVE T1,TIME## ;RESET THE TIMER FOR
DPB T1,JBYWCH## ; THE NEXT TIME
MOVEI T1,[ASCIZ ' RUN: ']
PUSHJ P,CONMES
MOVEI T1,0 ;CLEAR INCREMENTAL RUNTIME
.EXCH T1,.PDRTM##(W) ; AND PICK UP OLD RUN TIME
PUSHJ P,PRTIM ;PRINT THAT
MOVEI T1,[ASCIZ ' RD:']
PUSHJ P,CONMES
PUSHJ P,PRTWDR## ;DISK READS
MOVEI T1,[ASCIZ ' WR:']
PUSHJ P,CONMES
PUSHJ P,PRTWDW## ;DISK WRITES
PUSHJ P,PRSPC ;ANOTHER SPACE
MOVE T2,JBTPRG##(J) ;PROGRAM NAME
PUSHJ P,PRNAME## ;PRINT THE NAME
PUSHJ P,PRSPC ;ANOTHER SPACE
PUSHJ P,PRTSEG ;LOW SEG SIZE
PUSHJ P,PRTHGH## ;HIGH SEG SIZE
PUSHJ P,PRPORK ;PRINT P OR K
PUSHJ P,PRSPC ;ANOTHER SPACE
;STILL IN FTWATCH
MOVSI T2,'^C' ;ASSUME CONTROL-C STATE
JUMPG P4,USECM1 ;JUMP IF TRUE
LDB T1,PJBSTS## ;PICK UP JOB STATE
IDIVI T1,3 ;DIVIDE BY 3 TO GET WORD NUMBER
IMULI T2,^D12 ;MULTIPLY REMAINDER BY 12 TO GET POSITION
MOVE T3,STSTBL##(T1) ;PICK UP ENTRY
ROT T3,(T2) ;GET CORRECT THIRD
MOVSI T2,777700 ;ONLY LOOK AT TOP 12 BITS
AND T2,T3 ;COPY STATE
USECM1: PUSHJ P,PRNAME## ;PRINT THAT
IFN FTLOCK,<
MOVEI T3,"&" ;ASSUME LOCKED
TLNE P4,NSWP ;SEE IF LOCKED
PUSHJ P,PRCHR ;YES, LOCKED
>;END IFN FTLOCK
MOVEI T3,"*" ;ASSUME CURRENT JOB
CAMN J,.C0JOB## ;ARE WE THE CURRENT JOB?
PUSHJ P,PRCHR ;YES--PRINT *
IFN FTMS,<
PUSHJ P,OTHCPU## ;ARE WE ON CPU1?
PUSHJ P,PRCHR ;YES--PRINT *
>
PUSHJ P,PRSPC ;ANOTHER SPACE
MOVSI T2,'SW ' ;ASSUME SWAPPED
TLNE P4,SWP ;IS JOB IN CORE?
PUSHJ P,[SKIPE JBTADR##(J) ;ANY PHYS MEM?
MOVSI T2,'SW*' ;YES--ADD * TO MEAN SWAPPING
PJRST PRNAME##] ;PRINT SW OR SW*
MOVEI T1,[ASCIZ ' PC:']
PUSHJ P,CONMES
HRRZ T1,JBTPC##(J) ;GET CURRENT PC
PUSHJ P,OCTPNT## ;PRINT PC IN OCTAL
IFN FTVM,<
SKIPN JBTADR##(J)
JRST USECM3
MOVSI T1,SWP ;BIT INDICATING SWAPPED OR BEING SWAPPED
SKIPE .UPMP+.UPVRT ;VIRTUAL?
TDNE T1,JBTSTS##(J) ;AND IN CORE?
JRST USECM3 ;NO, SKIP THIS
MOVEI T1,[ASCIZ /
FAULTS - IW: /]
PUSHJ P,CONMES ;PRINT THE TEXT
MOVE T1,.UPMP+.UPVCT ;REPORT INCREMEMTAL IN WORKING SET FAULTS
SUB T1,.UPMP+.UPICT
HRRZS T1
PUSHJ P,RADX10##
MOVEI T1,[ASCIZ / NIW: /]
PUSHJ P,CONMES ;PRINT TEXT
MOVE T1,.UPMP+.UPVCT ;REPORT INCREMENTAL NOT IN WORKING SET FAULTS
SUB T1,.UPMP+.UPICT
HLRZS T1
PUSHJ P,RADX10##
MOVE T1,.UPMP+.UPVCT ;UPDATE INCREMENTAL STATISTICS
MOVEM T1,.UPMP+.UPICT
MOVEI T1,[ASCIZ / VIRT CORE: /]
PUSHJ P,CONMES ;PRINT TEXT
LDB T1,[POINT 9,JBTVRT##(J),35]
PUSHJ P,PRCORE ;REPORT LOW SEGMENT VIRTUAL CORE
PUSHJ P,PRTPLS ;PRINT A PLUS SIGN
LDB T1,[POINT 9,JBTVRT##(J),26]
PUSHJ P,PRCORE ;REPORT HIGH SEGMENT VIRTUAL CORE
MOVEI T1,[ASCIZ / PAGE RATE: /]
PUSHJ P,CONMES ;PRINT TEXT
HLRZ T3,JBTVRT##(J) ;GET THE JOBS PAGING INTERVAL
SETZB T1,T2 ;ASSUME A RATE OF ZERO
JUMPE T3,USECM2 ;JUMP IF THE RATE IS ZERO
MOVEI T1,RTUPS## ;COMPUTE THE JOBS PAGING RATE
IDIVI T1,(T3)
IMULI T2,^D100
IDIVI T2,(T3)
USECM2: PUSH P,T2 ;SAVE THE REMAINDER
PUSHJ P,RADX10## ;PRINT THE RATE
PUSHJ P,PRPER ;AND A DOT
POP P,T1 ;RESTORE THE REMAINDER
MOVEI T3,"0" ;ASSUME THE REMAINDER IS IN HUNDREDTHS
CAIG T1,^D9 ;IS IT?
PUSHJ P,PRCHR ;YES, PRINT A LEADING ZERO
PUSHJ P,RADX10## ;AND PRINT DIGITS FOLLOWING THE DECIMAL PLACE
USECM3:> ;END FTVM
HLRZ F,JBTPC##(J) ;GET DDB ADDRESS
JUMPE F,USECM4 ;ALL DONE IF NO DDB
MOVE T2,DEVIOS(F)
MOVEI T1,[ASCIZ "
INPUT"]
TLNE T2,IO
MOVEI T1,[ASCIZ "
OUTPUT"]
PUSHJ P,CONMES ;PRINT THE TEXT
MOVEI T1,[ASCIZ " WAIT FOR "]
PUSHJ P,CONMES
PUSHJ P,PRTDDB ;PRINT FILE SPEC
MOVE T1,DEVMOD(F) ;GET DEVICE BITS
TLNE T1,DVDSK ;IS THIS A DISK?
PUSHJ P,DSKCTT## ;YES -- PRINT GOOD STUFF
MOVE T1,DEVMOD(F) ;IS THIS A
TLNE T1,DVMTA ; TAPE?
PUSHJ P,TPMCTT## ;YES--PRINT FILE & RECORD
USECM4: HRRZ F,LDBDDB(U) ;GET DDB ADDRESS
HLL U,LDBDCH##(U) ;GET DEVICE BITS FOR TTY
TLNE U,LDLCOM## ;COMMAND LEVEL?
TLZ M,NOPER ;YES--PRINT A PERIOD
TLNN U,LDLOSU## ;CONTROL-O IN EFFECT
TLZ M,NOMESS ;NO--CLEAR NOMESS
POPJ P,0 ;RETURN
>;END FTWATCH
;SUBROUTINE TO PRINT A FILESPEC FOR A DDB
;CALL WITH:
; F = DDB ADDRESS
; U = LDB ADDRESS (OR FIX COMTOA)
; PUSHJ P,PRTDDB
; RETURN HERE
;
PGMFIL::HRRZ F,USRJDA##
JUMPE F,CPOPJ##
PUSHJ P,INLMES
ASCIZ / from /
PRTDDB::PUSHJ P,SAVE1## ;SAVE P1
MOVE P1,DEVMOD(F) ;GET DEVICE TYPE BITS
MOVE T2,DEVNAM(F) ;GET DEVICE NAME
HRRZ T3,DEVUNI##(F) ;UDB POINTER
JUMPE T3,PRTDD0 ;NO UNIT IF A KNOWN SEGMENT
TLNE P1,DVDSK ;IS THIS A DISK?
MOVE T2,UNILOG##(T3) ;YES--PRINT STR NAME
PRTDD0: PUSHJ P,PRNAME## ;PRINT IT
MOVEI T3,":" ;ADD A COLON
PUSHJ P,PRCHR ; ..
TLNN P1,DVDSK!DVDTA ;FILE AND EXT?
POPJ P,0 ;NO--ALL DONE
MOVE T2,DEVFIL(F) ;GET FILE NAME
JUMPE T2,PRTDD3 ;PUNT IF NO NAME
HLRZ T3,DEVEXT(F) ;IS THIS A UFD
TLNE P1,DVDSK ;ON DISK
CAIE T3,'UFD'
JRST PRTDD1 ;NO
PUSHJ P,PRTPPN ;YES -- PRINT FILE NAME AS [M,N]
JRST PRTDD2 ;AND NOT SIXBIT
PRTDD1: PUSHJ P,PRNAME## ;PRINT IT
PRTDD2: PUSHJ P,PRPER ;ADD IN A DOT
HLLZ T2,DEVEXT(F) ;GET EXTENSION
PUSHJ P,PRNAME## ;PRINT IT
PRTDD3: TLNN P1,DVDSK ;IS THIS THE DISK?
POPJ P,0 ;NO--ALL DONE
SKIPN T2,DEVPPN(F) ;FALL INTO PRTPPN IF PPN
POPJ P, ;ELSE RETURN
PRTPPN: PUSH P,T2 ;SAVE PPN
MOVEI T3,"[" ;PRINT [
PUSHJ P,PRCHR
HLRZ T1,(P)
PUSHJ P,PRTDI8## ;PROJECT
PUSHJ P,PRCOM ;COMMA
HRRZ T1,(P)
PUSHJ P,PRTDI8## ;PROG
MOVEI T3,"]"
PUSHJ P,PRCHR
JRST T2POPJ##
SUBTTL SAVE, SSAVE AND GET - COMMAND SETUP
; "SSAVE DEVICE:FILNAM.EXT [PROJ,R] CORE"
;WORKS LIKE SAVE, EXCEPT THAT HIGH SEG IS SAVED AS SHARABLE(EXT=SHR)
;INSTEAD OF NON-SHARABLE(EXT=HGH)
; "SAVE DEVICE:FILE-NAME[PROJ.,PROG.] CORE" - SAVES JOB AREA ON RETRIEVABLE DEVICE
;ONLY A SAVE OR A GET IN PROGRESS FOR EACH JOB
;NO ATTEMPT IS MADE TO SAVE DEVICE ASSIGNMENTS, AC'S, OR PC
IFN FTEXE,<
NSAVE: TLO S,NSRBIT ;SET FLAG FOR SAVE
NSSAVE: MOVSI T1,(JS.EXE) ;GET EXE BIT
IORM T1,JBTST2##(J) ;SET IT IN JOB STATUS WORD
JRST SSAVE2 ; AND CONTINUE AS BEFORE
> ;END OF IFN FTEXE
SAVEO: TLO S,NSRBIT ;OLD SAVE
JRST SSAVE1
SAVE:IFN FT2REL,<
TLO S,NSRBIT ;SET FLAG FOR NON-SHARABLE EXT(HGH)
>
SSAVE:
IFN FTEXE,<
MOVE T1,CNFST2## ;CHECK CONFIG BIT FOR EXE FILE SAVES
TRNE T1,1B21 ;IF ON,...
JRST NSSAVE ;... PROCEED AS IN "NSAVE"
>
SSAVE1:
IFN FTEXE,<
MOVSI T1,(JS.EXE) ;GET EXE BIT
ANDCAM T1,JBTST2##(J) ;CLEAR IT JUST FOR SAFETY
SSAVE2:
> ;END OF IFN FTEXE
HRRI S,SAVJOB ;SETUP TO RUN SAVJOB (S CLEARED BEFORE CALL)
JRST SGSETD
; "GET DEVICE:FILE-NAME[PROJ.,PROG.] CORE" - SETS UP JOB AREA FROM RETREIVABLE
;DEVICE AND ASSIGNS CORE.
GET: HLLZ T2,SYSTAP## ;SETUP DEFAULT DEVICE
MOVEI S,GJOB ;SETUP TO RUN GETJOB
JRST RUNCM
; JOB DATA AREA FOR MONITOR JOB
IFN FTLOGIN,< ;AUTOMATIC LOGIN AFTER DSK REFRESH OR WHEN REFLAG SET
LOGREF: PUSHJ P,ISOPCT ;SKIP IF OPR OR CTY
JRST CLOG2A ;NO, REGULAR LOGIN
LOGRF1: MOVEM T1,JBTPPN##(J) ;PRJ,PRG NRS. IN REFLAG
PUSHJ P,SETLOG## ;TURN ON JLOG
IFN FTPRV,<
SETOM JBTPRV##(J) ;GIVE OPERATOR ALL PRIVILEGES
>
TLZ M,-1 ;CLEAR ALL FLAGS FOR COMRET
SETZM REFLAG## ;ONLY ONCE
POPJ P,
;SUBROUTINE TO CHECK IF LINE POINTS TO OPR OR CTY
;SAVES T1, USES T2
;RETURNS NONSKIP IF NOT OPR OR CTY, SKIP IF EITHER OPR OR CTY
ISOPCT: HRRZ T2,U ;T2=ADDR OF LINE DATA BLOCK
CAMN T2,OPRLDB## ;SKIP IF NOT OPR
JRST CPOPJ1## ;YES, IT IS OPR
MOVE T2,LDBDCH##(T2) ;T2=LINE CHARACTERISTICS
TRNN T2,LDRCTY## ;SKIP IF CTY
POPJ P, ;NO, NEITHER OPR NOR CTY
JRST CPOPJ1## ;YES, IT IS CTY
> ;END CONDITIONAL ON FTLOGIN
SUBTTL COMMANDS WHICH RUN PROGRAMS
IFN FTCCLX&FTLOGIN,<
;FOR REMOTE USAGE OF FILE STORAGE SYSTEM
RECALL: SKIPA T1,[SIXBIT .UMOUNT.] ;RUN UMOUNT
> ;END CONDITIONAL OF FTCCLX&FTLOGIN
;IFE FTCCLX&FTLOGIN,<
;RECALL==COMERR
;>
IFN FTCCL,<
CCLRUN: MOVE T1,COMPIL ;CUSP NAME
JRST ARCOM ;RUN IT
>
;"LOGIN" - LOGIN COMMAND
IFN FTLOGIN,<
LOGDET: JSP T1,ERRMES
IFN FTATTACH,<
ASCIZ /Please KJOB or DETACH
/
>
IFE FTATTACH,<
ASCIZ /please KJOB
/
>
CLOGIN: TLNE P4,JLOG ;FORCE USER TO LOGOUT BEFORE
JRST LOGDET ; LOGGING IN ANEW.
IFN FTSWAP,<
MOVE T1,VIRTAL## ;AMOUNT OF FREE VIRTUAL CORE LEFT
CAIGE T1,LOGSIZ## ;IS THERE AT LEAST 2K FOR LOGIN?
; CUSTOMER CAN REDEFINE TO BE BIGGER THAN 2
; WITH MONGEN DIALOG
JRST COR2 ;NO--GO TELL USER AMOUNT OF CORE LEFT
>
SKIPE T1,REFLAG## ;REFLAG SET NON-ZERO FOR AUTOMATIC LOGIN?
JRST LOGREF ;YES, LOG USER IN WITHOUT RUNNING CUSP
CLOG2A: MOVSI T1,LDLNEC## ;GO TO LOGIN, CLEAR ECHO
IORM T1,LDBDCH##(U)
MOVEI T1,NOECHO## ;ALSO IN DDB
IORM T1,DEVIOS(F)
JRST RUNAME
>
IFN FTLOGIN&FTACCT,<
CSESSN: MOVE P2,LOGTXT ;SIXBIT /LOGIN/
JRST RUNAME ;GO RUN IT
>
IFN FTQCOM,<
RUNQUE: MOVE P2,QUEUE ;SET CUSP NAME
JRST RUNAME ;GO RUN IT
>
IFN FTMIC,<
;HERE TO RUN MIC IN RESPONSE TO A WHOLE BUNCH OF COMMANDS
RUNMIC: MOVSI P2,'MIC'
JRST RUNAME
;HERE TO PROCESS I COMMAND TO AVOID CONFLICT WITH I FOR IF
RUN..I: MOVE P2,[SIXBIT /INITIA/]
JRST RUNAME
;HERE TO PROCESS PLEASE COMMAND (SEE IF USER IS RUNNING MIC)
RUNPLS: SKIPE LDBMIC##(U) ;IS HE RUNNING UNDER MIC?
JRST RUNMIC ;YES - ITS A MIC PLEASE
JRST RUNAME ;NO - ITS A NORMAL ONE
>
IFN FTNET,<
RUNNET: MOVE P2,[SIXBIT/NETLDR/]
JRST RUNAMC
>;END FTNET
IFN FTCCLX,<
RUNPIC: MOVSI P2,'PIP' ;SET NAME UNTIL FUDGE2 GET CCLS STUFF
>
RUNAMC: MOVEI P1,1 ;SET CCL START
;RUNAME--COMMAND WHICH RUNS CUSP OF SAME NAME
RUNAME:
IFN FTLOGIN,< TLNE P4,JLOG ;SEE IF LOGGED IN
JRST RUNAM1 ;YES--PROCEED
MOVE T1,HELPPP## ;GET P,PN FOR JOB
MOVEM T1,JBTPPN##(J)
MOVSI P4,JLOG!JNA ;CLEAR JLOG&JNA SO COMRET DOES ALL GOOD THINGS
ANDCAB P4,JBTSTS##(J)
> ;END CONDITIONAL ON FTLOGIN
RUNAM1:
IFN FTSWAP,<
PUSHJ P,TTYATI## ;REATTACH TTY
JFCL
>
MOVE T1,P2 ;GET CUSP NAME
; "R CUSPNAME CORE" - DOES "RUN SYS:CUSPNAME"
ARCOM: MOVEI T3,12 ;MAKE SURE NO MORE ARGS SCANNED
MOVEM T3,TTCMCH## ; ..
MOVEM T1,JBTPRG##(J) ;STORE FILE NAME
RCOM: MOVSI T2,(SIXBIT /SYS/) ;READ FROM SYS DEVICE
JRST RUNCO2
; "RUN DEVICE:FILE[PROJ.,PROG.] (CORE)"
;DOES A CORE,GET,START ALL IN ONE
;IF CORE ARG IS MISSING, SIZE IN DIRECTORY IS USED
;JOB ON DISK OR IN CORE OR NO CORE, BUT NOT IN MIDDLE OF SWAP
RUNCOM: HLLZ T2,SYSTAP## ;SET DEFAULT DEVICE DISK (DTA IN 10/40)
RUNCO2: MOVEI S,RUNJOB
RUNCM:
IFN FTFDAE,<
PUSHJ P,CHKXTM ;SEE IF AN "EXIT" MESSAGE SHOULD BE SENT
; TO THE FILE DAEMON AND IF SO, SEND IT
PUSHJ P,CLRTAB ;MAKE EVERYTHING CLEAR TO FILDAE.
>
MOVSI T1,JERR ;DON'T ALLOW CONTINUE
IORM T1,JBTSTS##(J) ; AFTER THE CORE IMAGE HAS BEEN WIPED OUT
PUSHJ P,GETMIN ;GET MINIMAL JOB AREA IN CORE OR DISK
IFN FTSET,<
MOVSI T1,(JS.BPR) ;ALLOWED DESPITE FORCED PGM TO RUN ?
TDNE T1,JBTST2(J)
JRST [ANDCAM T1,JBTST2(J) ;YES, CLEAR FLAG
JRST RUNCM1] ; AND RUN WHAT HE ASKED FOR
PUSHJ P,FNDPDB## ;SETUP W
JRST RUNCM1 ;NO PDB
SKIPN T1,.PDPGM##(W) ;PROGRAM FORCED?
JRST RUNCM1 ;NO--CHARGE ON
MOVEM T1,JBTPRG##(J)
MOVEI T1,12
MOVEM T1,TTCMCH##
MOVSI T2,'SYS'
MOVSI P1,PHONLY ;INHIBIT LOG NAMES
RUNCM1:
>;END FTSET
JUMPN R,SGSET ;WAS CORE ASSIGNED IN MEMORY? IF YES, GO SCANARGS
IFN FTVM,<
LDB T1,IMGIN## ;NO CORE IN CORE, CORE ON THE DISK?
JUMPE T1,COR2 ;COMPLAIN IF NONE
>
IFN FTSWAP,<
SKIPLE VIRTAL## ;NO, CORE LEFT ON DISK?
JRST DLYCM ;YES, DELAY COMMAND UNTIL IN CORE
>
JRST COR2 ;NO, PRINT "0K CORE LEFT"
SUBTTL ASSIGN, DEASSIGN AND REASSIGN COMMANDS
; "ASSIGN DEV:NAME" - ASSIGN DEVICE TO JOB AND GIVE IT LOGICAL NAME
ASSIGN:
IFN FTNET,<
SKIPN JBTADR##(J) ;ANY CORE ASSIGNED
PUSHJ P,GETMIN ;NO, GET SOME CORE
JUMPE R,DLYCM ;DELAY THE COMMAND
PUSHJ P,SAVCTX## ;SAVE THE CONTEXT OF THE JOB
>;END IFN FTNET
PUSHJ P,CTXDEV ;GET FIRST ARGUMENT TO T2 "DEV"
JUMPE T2,NOTENF ;NO ARGUMENT TYPED IF 0
IFN FTNET,<
CAIN T3,"_" ;CHECK FOR A NODE SPECIFICATION
JRST NETASG## ;YES, DO A NETWORK ASSIGN
ASSIGC:: ;RE-ENTRY IF NODE SPEC IS LOCAL
; OR WHEN THE DEVICE IS CONNECTED FROM
; THE NETWORK VIA CONNECT
> ;END IFN FTNET
IFE FTDISK,<
CAME T2,[SIXBIT .SYS.] ;"ASSIGN SYS:DEV" USED TO CHANGE ASSIGNMENT
; OF SYS. LEGAL ONLY FOR PROJECT 1 USER
JRST ASSG6 ;NOT "SYS"
PUSHJ P,SETLGL ;SEE IF OPR OR [1,2]
PUSHJ P,CTEXT1 ;GET NEW DEVICE NAME IN T2
JUMPE T2,NOTENF ;NO ARGUMENT TYPED IF 0
SKIPL STREQ## ;SYSTEM TAPE AVAILABLE?
JRST DLYCM1 ;NO
MOVEM T2,SYSTAP## ;REDEFINE SYSTAP
POPJ P,
ASSG6:>
MOVE P4,T2 ;SAVE DEVICE NAME
PUSHJ P,SKIPS1 ;FLUSH SPACES AND TABS
JRST ASSG1 ;END-OF-LINE IS OK
PUSHJ P,CTEX ;NEXT CHARACTER BETTER BE ALPHANUMERIC
JRST COMERA ;IT'S NOT, THAT'S NO ERROR
ASSG1: PUSH P,U ;SAVE TTY LDB
MOVE T1,P4 ;DEVICE NAME IN T1
PUSHJ P,DEVPHY## ;DO SOMETHING (LOOK FOR TTY MAYBE)
JRST ASSG3 ;NOT A PHYSICAL NAME
JRST ASSG4 ;A SPECIFIC PHYSICAL NAME
ASSG3:
IFN FTGSRC!FTNET,<
SETZ T3, ;ANY DEVICE EXIST
PUSHJ P,DVSRSP##
JRST ASSFAL ;NO - ERROR
IFN FTSPL,<
LDB T3,DEYSPL## ;YES. SPOOL BIT
SKIPE DEVCHR(F)
TDNE T3,JBTSPL##(J) ;THIS DEV SPOOLED?
JRST ASSG3A ;YES, GO FAKE UP A DDB
> ;END CONDITIONAL ON FTSPL
PUSH P,F
MOVEI T3,ASSCON+ASSPRG ;FLAG ASSIGNED DEV AS UNACCEPTEABLE
PUSHJ P,DVASRC## ;SEARCH FOR GENERIC NAME
JRST ASSG3B
POP P,(P)
ASSG3A: MOVEI T2,ASSCON ;SET ASSIGNED BY CONSOLE BIT
PUSHJ P,ASSASG## ;GO ASSIGN DEVICE
JRST ASSG3 ;IN THE UNUSUAL CASE THAT A HIGHER PRIORITY
;INTERRUPT HAS TAKEN THE CHOSEN
;DEVICE FROM US WE MUST TRY AGAIN
JRST ASSFIN ;SUCCESS ON ASSIGN
;HERE IF SOME DEVICE OF THIS FLAVOR EXISTS
ASSG3B: POP P,F ;F POINTS TO THE DDB IF "DEVX"
TRNE T1,770000 ;IS IT DEVX:
TRNE T1,7700
TRZA T1,-1 ;NO, CLEAR RIGHT HALF GO TO ASSFAL
JRST ASSG4 ;YES, TREAT AS PHYSICAL DEVICE
;STILL IN CONDITIONAL ON FTGSRC!FTNET
;HERE WHEN A GENERIC ASSIGN FAILS
;USES 2 FLAGS IN LH OF P3
ASF.SP==1B0 ;SOMETHING HAS BEEN PRINTED
ASF.MJ==1B1 ;AT LEAST 1 ASSIGNED TO MY JOB
ASSFAL: POP P,U ;RESTORE TTY LDB
JUMPGE T4,NOTDEV ;NO DEVICES FOUND - GO PRINT
;NO-SUCH-DEVICE
IFN FTNET,<MOVE P2,T2 ;COPY NODE NUMBER>
PUSHJ P,CHKGEN## ;IS IT A VALID GENERIC NAME?
JFCL ;START AT DEVLST
;(A BAD GENERIC DEVICE SHOULD BE...
;...FOUND ABOVE AT ASSFAL+1!!!)
PUSHJ P,FXSNAM## ;FIX NAME IF 2-CHAR
MOVEI P3,-1 ;NO FLAGS AND ILL JOB NUMBER
ASSFA1: HLLZ T4,DEVNAM(F) ;GET GENERIC PHYSICAL NAME
CAMN T1,T4 ;SEE IF MATCH
PUSHJ P,ASSFA3 ;YES--DO REST OF CHECKS
HLRZ F,DEVSER(F) ;NO--GET NEXT DEVICE
JUMPN F,ASSFA1 ;CONTINUE IF END-OF-CHAIN
TLO M,ERRFLG ;FLAG ERROR
JUMPL P3,CRLF ;DONE IF MESSAGE PRINTED
MOVEI T1,ASSMS3 ;ASSUME EVERYTHING RESTRICTED
TLNE P3,(ASF.MJ) ;ALL ASSIGNED TO OUT JOB
MOVEI T1,[ASCIZ "ASSIGNED TO YOUR JOB"]
JRST ASSER6 ;PRINT MESSAGE AND RETURN
;HERE WITH F POINTING TO A DDB WE MAY WANT TO LIST
ASSFA3: PUSH P,T1 ;SAVE DEVICE NAME
LDB T1,PJOBN## ;GET JOB NUMBER
IFN FTNET,<
LDB T2,PDVSTA## ;GET STATION
CAME T2,P2 ;CHECK MATCH
JRST TPOPJ##
>
CAMN T1,J ;ASSIGNED TO US?
TLO P3,(ASF.MJ) ;YES--SET FLAG
CAME T1,J ;YES--IS IT OTHER JOB?
CAIN T1,(P3) ;SEE IF SAME
JRST TPOPJ## ; AS PREVIOUS
JUMPE T1,TPOPJ## ;CHECK FOR 0 JOB NUMBER
HRR P3,T1 ; NO-PRINT
;HERE WHEN T1= JOB NUMBER TO TYPE
TLOE P3,(ASF.SP) ;PRINTED ANYTHING YET?
JRST ASFA3A ;YES--JUST ADD A COMMA
PUSH P,T1 ;SAVE GENERIC DEVICE
IFN FTNET,<PUSH P,P2> ;AND STATION
PUSHJ P,INLMES ;PRINT MESSAGE
ASCIZ /?Assigned to job /
IFN FTNET,<POP P,P2> ;RESTORE STATION
POP P,T1 ;RESTORE GENERIC NAME
JRST ASSFA4 ;SKIP COMMA
ASFA3A: PUSHJ P,PRCOM ;ISSUE COMMA
ASSFA4: PUSHJ P,RADX10## ;ISSUE JOB NUMBER
JRST TPOPJ## ;AND LOOP
> ;END CONDITIONAL ON FTGSRC!FTNET
IFE FTGSRC!FTNET,<
MOVEI T2,ASSCON ;SET UP ASSIGNED BY CONSOLE BIT
HLRZ F,DEVLST## ;PREPARE TO SEARCH DDB'S
ASSG0: MOVE T1,DEVNAM(F) ;GET DEVICE NAME FROM DDB
CAMN P4,T1 ;SKIP IF NOT DEVICE REQUESTED
JRST ASSG4 ;TRY TO ASSIGN IT
ASSG1:
IFE FTDISK,<
CAMN T1,SYSTAP## ;IS THIS THE SYSTEM DEVICE?
JRST ASSG2 ;YES, KEEP LOOKING
>
LDB P3,PJOBN## ;OLD JOB # FOR THIS DEVICE
TRZ T1,-1 ;COMPARE LEFT HALF ONLY (DTA,MTA)
CAMN T1,P4 ;SKIP IF DOESN'T MATCH
PUSHJ P,ASSASG## ;MATCH, TRY TO ASSIGN DEVICE
JRST ASSG2 ;CAN'T ASSIGN, KEEP LOOKING
JUMPE P3,ASSFIN ;SUCCESS IF OLD JOB #0, DEVICE PREVIOUSLY UNASSIGNED
ASSG2: HLRZ F,DEVSER(F) ;STEP TO NEXT DEVICE
JUMPN F,ASSG0 ;KEEP LOOKING IF ANOTHER DEVICE
JRST NOTDV1 ;NO SUCH DEVICE
> ;END CONDITIONAL ON FTGSRC!FTNET
;PHYSICAL NAME MATCHES IF HERE
ASSG4:
IFN FTDISK,<
MOVE T2,DEVMOD(F) ;DEVMOD WORD
TLNN T2,DVDSK ;IS THIS A DISK?
JRST ASSG5 ;NO.
SETZM DEVLOG(F) ;YES. CHECK FOR LOGICAL NAME
POP P,U ;RESTORE TTY LDB ADDRESS
PUSH P,F ;AND SAVE DEVICE'S DDB
PUSH P,T1 ;SAVE PHYSICAL NAME
PUSHJ P,CTEXT1 ;GET LOGICAL NAME ARGUMENT OF "ASSIGN DEV:NAME"
MOVE T1,T2 ;COPY TO T1 FOR DEVLG
JUMPE T1,ASSG8 ;NO LOGICAL NAME SPECIFIED, IF 0
PUSH P,T2 ;SAVE LOG. NAME
PUSHJ P,DEVLG## ;SEE IF LOGICAL NAME IN USE
JRST ASSG4A ;NO
PUSHJ P,ASSCHK ;YES, SEE IF WE CAN RECLAIM SPACE
MOVEI T1,LOGERR
PUSHJ P,CONMES
ASSG4A: POP P,T2 ;RESTORE LOG. NAME
POP P,T1 ;GET PHYSICAL NAME BACK
POP P,F ;RESTORE DDB ADDRESS
PUSH P,T2 ;SAVE LOGICAL NAME
MOVEI T2,ASSCON
PUSHJ P,ASSASG## ;ASSIGN BY CONSOLE
JRST ASSER4 ;NO MORE CORE FOR DISK DDB'S
POP P,T1 ;RESTORE LOGICAL NAME
JRST ASSF2 ;FINISH LOGICAL ASSIGNMENT
> ;END FTDISK CONDITIONAL
ASSG5: IFE FTDISK<
CAMN T1,SYSTAP## ;IS THIS SYSTEM DEVICE
JRST ASSFIN ;YES, DO NOT ASSIGN
>
MOVEI T2,ASSCON
PUSHJ P,ASSASG## ;TRY TO ASSIGN DEVICE
JRST ASSER5 ;ALREADY ASSIGNED TO ANOTHER JOB
JRST ASSFIN ;SUCCESSFULLY ASSIGNED
ASSG8: POP P,T2 ;REMOVE GARBAGE FROM PD LIST
POP P,F ;RESTORE POINTER TO PROTOTYPE DSK DDB
JRST ASSF6
;ALREADY ASSIGNED TO ANOTHER JOB
ASSER3: POP P,T1 ;CLEAN UP P.D. LIST
ASSER0: MOVEM U,0(P) ;DISCARD LOGICAL NAME VIA NEXT POP INSTR
ASSER1: POP P,U ;GET LDB ADDRESS
ASSER2: LDB T1,PJOBN## ;GET JOB NUMBER DEVICE ASSIGNED TO
PUSH P,T1 ;SAVE JOB NO.
MOVEI T1,ASSMS2 ;TYPE ERROR MESSAGE
PUSHJ P,ERRMES
POP P,T1 ;GET JOB NO. BACK
JRST DECLF ;AND TYPE IT
ASSER4: MOVEM U,0(P) ;DISCARD LOGICAL NAME VIA NEXT POP INSTR.
ASSER5: POP P,U ;GET LDB ADDRESS
JUMPGE T2,ASSER2 ;JUMP IF NOT RESTRICTED DEVICE
MOVEI T1,ASSMS3 ;TYPE ERROR MESSAGE
ASSER6: PUSHJ P,ERRMES ;Y
JRST CRLF
ASSMS2: ASCIZ /Already assigned to job /
ASSMS3: ASCIZ /Device not assignable/
;DEVICE ASSIGNED, GIVE IT A LOGICAL NAME
ASSFIN: SETZM DEVLOG(F) ;CLEAR LOGICAL NAME
POP P,U ;RESTORE TTY LDB ADDR
PUSHJ P,CTEXT1 ;GET SECOND ARG, LOGICAL DEVICE NAME
IFN FTSPL,<
SKIPGE DEVSPL(F) ;IF A SPOOLING DDB,
JUMPE T2,[PUSH P,DEVNAM(F) ;SAVE DEVICE NAME BEFORE GIVING BACK DDB
PUSHJ P,CLRDDB## ;GIVE DDB BACK TO FREE STORAGE
; SINCE NO LOGICAL NAME
JRST ASSF4] ;GO PRINT "SPOOLED"
>
PUSH P,F ;SAVE DEVICE'S DDB
PUSH P,T2 ;SAVE LOGICAL NAME
SKIPE T1,T2 ;IS THERE A LOGICAL NAME SPECIFIED?
PUSHJ P, DEVLG## ;YES, SEE IF IT IS ALREADY IN USE
; BY THIS USER
JRST ASSF3 ;NO
PUSHJ P,ASSCHK ;YES, SEE IF WE CAN RECLAIM SPACE
MOVEI T1,LOGERR ;YES, PRINT ERROR
PUSHJ P,CONMES
ASSF3: POP P,T1 ;RESTORE LOGICAL NAME FOR THIS DEVICE
ASSF1: POP P,F ;DDB OF THE NEWLY ASSIGNED DEVICE
ASSF2: MOVEM T1,DEVLOG(F) ;STORE IN DEVICE DATA BLOCK
PUSHJ P,SETDVL##
MOVSI T2,DVDIRIN ;CLEAR DIRECTORY IN CORE BIT
ANDCAB T2,DEVMOD(F) ;SETUP T2 WITH DEVICE CHARACTERISTICS FOR ASGHGH
IFN FT2REL,<
PUSHJ P,ASGHGH## ;GO CHECK IF THIS DEVICE HAS
; INITIALIZED ANY SHARED SEGMENTS
; IF YES, CLEAR SEG NAMES SO NO
; NEW SHARING (DTA,MTA ONLY)
>
IFE FTSPL,< ;NO SPOOLING?
MOVE T2,DEVNAM(F) ;PHYSICAL DEVICE NAME
>
ASSF6:
IFN FTSPL,< ;SPOOLING?
PUSH P,DEVNAM(F) ;SAVE PHYSICAL DEVICE NAME
SKIPL DEVSPL(F) ;IS THIS A SPOOLED DEVICE
JRST ASSF5 ;NO
;HERE TO TELL USER HE HAS ASSIGNED A SPOOLED DEVICE
ASSF4: PUSHJ P,INLMES ;YES, TELL HIM (IN CASE HE DOESN'T KNOW)
ASCIZ /Spooled /
ASSF5: POP P,T2 ;RESTORE PHYSICAL NAME
> ;END FTSPL
PUSHJ P,PRNAME## ;PRINT PHYSICAL NAME IT
PJSP T1,CONMES ;AND RETURN
ASCIZ / assigned
/
LOGERR: ASCIZ /%Logical name was in use, /
;SUBROUTINE TO CLEAR THE LOGICAL NAME OF A DEVICE
;ENTER WITH F SET UP
;ZEROES DEVLOG, THEN CHECKS FOR DSK/SPOOL TYPE
;IF INIT'ED, CLEAR ASSCON
;IF NOT INIT'ED, CLEAR DDB
;ENTER AT ASSCK1 TO NOT ZERO DEVLOG
;CLOBBERS T2
ASSCHK: SETZM DEVLOG(F) ;CLEAR OLD NAME
ASSCK1::MOVE T2,DEVMOD(F) ;GET MOD WORD
TLNN T2,DVDSK ;DISK?
SKIPGE DEVSPL(F) ;OR SPOOL?
SKIPA ;YES, SKIP ALONG
POPJ P, ;NO, JUST RETURN
TRNN T2,ASSPRG ;INIT'ED?
PJRST [PUSHJ P,CLRDVL## ;NO, CLEAR LOGICAL NAME TABLE ENTRY
JRST CLRDDB##] ; CLEAR DDB AND RETURN
MOVEI T2,ASSCON ;YES, TURN OFF ASSCON
ANDCAM T2,DEVMOD(F) ;...
POPJ P, ;AND RETURN
;"DEASSIGN DEV" - DEASSIGNS DEVICE FROM CONSOLE
DEASSI:
IFN FTNET,<
SKIPN JBTADR##(J) ;ANY CORE ASSIGNED
PUSHJ P,GETMIN ;NO, GET SOME CORE
JUMPE R,DLYCM ;DELAY THE COMMAND
PUSHJ P,SAVCTX## ;SAVE THE CONTEXT OF THE JOB
> ;END IFN FTNET
PUSHJ P,CTXDEV ;GET DEVICE NAME
JUMPE T2,DEASTY ;NO ARG. IF 0, DEASSIGN ALL BUT TTY
MOVE T1, T2 ;DEVICE NAME
PUSHJ P, DEVSRG## ;SEARCH FOR DEVICE
JRST DEAER1 ;NOT FOUND
DEASI1:
PUSHJ P, DEASG ;FOUND, DEASSIGN IT
JRST DEAER2 ;NOT PREVIOUSLY ASSIGNED
PUSHJ P,TTYKLQ## ;KILL TTY DDB IF NOT NEEDED
POPJ P, ;DEVICE DEASSIGNED
NOTDEV::
DEAER1: SKIPE J ;IF NOT LOGGED IN (ATTACH FOO)
PUSHJ P,TTYFND##
SKIPA ;RESTORE TTY LINE DATA BLOCK
NOTDV1::POP P,U ;RESTORE U
JSP T1,ERRMES ;PRINT NO SUCH DEVICE
ASCIZ /No such device
/
DEAER2: PUSH P,F
PUSHJ P,TTYFND## ;RESTORE TTY LDB
POP P,F
MOVE T2,DEVNAM(F) ;PRINT PHYSICAL DEVICE NAME
PUSHJ P,PRNAMQ
PUSHJ P,TTYKLQ## ;REMOVE DDB
JSP T1,ERRMSN
ASCIZ / wasn't assigned
/
IFE FTREASSIGN,<
REASSI=UUOERR##
>
IFN FTREASSIGN,<
;REASSIGN UUO
;CALL MOVE AC,JOB NUMBER OR -1(SELF) OR 0(DEASSIGN)
; MOVE AC+1,SIXBIT /DEVICE/
; CALL AC,[SIXBIT /REASSIGN/]
;IF C(AC)=0, JOB HAS NOT BEEN INITIALIZED
;IF C(AC+1)=0, DEVICE NOT ASSIGNED TO THIS JOB OR DEVICE IS A TTY
REASSI::SKIPGE T1 ;SEE IF OUR JOB (-1)
MOVE T1,JOB## ;YES--GET NUMBER
PUSH P,T1 ;STACK JOB NUMBER TO BE REASSIGNED TO
PUSHJ P,GETWD1##
MOVE T2,T1 ;DEVICE NAME
JRST REASS1
;"REASSIGN DEV:JOB" - REASSIGN DEVICE "DEV" TO JOB "JOB"
REASS: PUSHJ P,CTXDEV ;GET DEVICE NAME
JUMPE T2,NOTENF ;NULL NAME?
MOVE F,T2 ;SAVE IT
PUSHJ P,GETJOB ;GET NEW JOB NUMBER
MOVE T2,J ;NONE SPECIFIED. ASSUME SELF
PUSH P,T2 ;PUT JOB NUMBER ON STACK, DEVICE
MOVE T2,F ;NAME IN T2
;ROUTINE COMMON TO REASSIGN UUO AND COMMAND
;HERE WITH T2=DEVICE AND (P)=NEW JOB (0=DEASSIGN)
REASS1:
EXCH P1,(P) ;SAVE P1 IN STACK, P1= NEW JOB NUMBER
PUSH P,U ;SAVE U
MOVE T1,P1 ;T1 = NEW JOB NUMBER
PUSH P,T1
PUSHJ P,LGLPR1## ;IS JOB NUMBER OUT OF RANGE?
JRST REASE1 ;YES, DO NOT REASSIGN
JUMPE T1,REAS1A ;JUMP IF DEASSIGN
MOVE T1,JBTSTS##(T1) ;NEW JOB STATUS
TLNN T1,JNA ;DOES NEW JOB EXIST?
JRST REASE1 ;NO.
REAS1A: MOVE T1,T2
HLL P1,-2(P) ;GET PH ONLY BIT FROM ORIGINAL P1
IFE FT5UUO,<
PUSHJ P,DEVSRC## ;SEARCH FOR DEVICE
>
IFN FT5UUO,<
PUSHJ P,DVCNSG## ;SEARCH FOR DEV
>
JRST REASE2 ;NOT FOUND
PUSHJ P,TTYKLQ## ;KILL TTY DDB IF NOT NEEDED
NOSCHEDULE
IFN FTDISK,<
TLZ F,-1 ;CLEAR SYSDEV
IFN FTSWAP,<
CAIE F,SWPDDB##
>
CAIN F,DSKDDB## ;TRYING TO REASSIGN DSK?
JRST REASE7 ;YES, ERROR
>
LDB T2,PJOBN##
CAME T2,J ;ASSIGNED TO THIS JOB
JRST REASE9 ;NO, ERROR IF SOME OTHER
REAS1B: LDB T1,PDVTYP## ;DEVICE TYPE
CAIN T1,.TYMPX/.TYEST ;MPX DEVICE?
JRST REASE7 ;YES--ERROR
MOVE T1,DEVMOD(F)
LDB T3,DEYSPL## ;SPOOL BIT
TDNN T3,JBTSPL##(J) ;THIS JOB SPOOL THESE?
JRST REAS1X ;NO. NO PROBLEM
LDB T3,PJOBN## ;YES. HE DOES
CAME T3,J ;TO THIS JOB?
JRST REASE7 ;NO. CAN'T GET IT
REAS1X: TLNE T1,TTYATC ;IS IT THE CONSOLE TTY?
JRST REASE7 ;YES. CAN'T BE REASSIGNED.
;CONTINUED ON NEXT PAGE
IFN FTGALAXY,<
SKIPN 0(P) ;DEASSIGN?
JRST REAS1C ;YES
SKIPE %SIMDA## ;IS MDA RUNNING?
CAMN J,MDAJOB## ;YES, IS HE DOING THIS?
JRST REAS1C ;DON'T CHECK
MOVSI T1,DVCMDA ;CONTROLLED BIT
TDNN T1,DEVCHR(P) ;CONTROLLED?
JRST REAS1C ;NO
MOVSI T1,DVDATJ ;ALLOCATED BIT
TDNN T1,DEVCHR(F) ;ALLOCATED?
JRST REASE7 ;NO CAN'T REASSIGN IT
>;END IFN FTGALAXY
REAS1C: MOVE S,DEVMOD(F) ;SAVE DEVMOD WORD
MOVEI T1,ASSCON ;ASSIGN IT BY
TDNE T1,DEVMOD(F) ;SEE IF ASSIGNED
JUMPE T2,REASE3 ;YES--IF TO 0, ERROR
DPB J,PJOBN## ;PUT IN OUR NUMBER
SCHEDULE
SKIPN (P) ;SEE IF DEASSIGN
JRST REASS7 ;YES--GO DO IT
IORB T1,DEVMOD(F)
CAME J,(P) ;IS IT TO SAME JOB?
TRNN T1,ASSPRG ;NO. IS DEVICE INITED?
JRST REASS3 ;NO.
JUMPG M,REASS4 ;YES. COMMAND LEVEL?
HRL F,(P) ;YES. SCHEDULE RELEASE
MOVEM F,JOBFDV##(R)
POP P,T2
POP P,U
POP P,P1
TLO M,TTYRNC ;SET TTYRNC SO JOB WILL RUN
PJSP T2,MSTART##
JSP T1,MONSTR##
PUSH P,P1
PUSH P,U
MOVE J,JOB##
HLRZ T1,JOBFDV##(R)
PUSH P,T1
HRRZ F,JOBFDV##(R)
REASS4:
IFN FTMSGSER,<
PUSHJ P,MPXDIS##
SKIPA
JRST REASS3
>
HRRZ T4,DEVSER(F)
HRRZM F,JOBFDV##(R)
MOVE P1,USRHCU##
PUSH P,M ;SAVE M
REASS2: MOVE F,USRJDA##(P1) ;GET XWD UUO BITS,DDB ADDRESS
HRRZ T1,JOBFDV##(R) ;GET ADDR. OF DDB SAVED BY COMMAND
DPB P1,PUUOAC## ;SET CHANNEL # FOR CLOSE
CAIN T1,(F) ;IS CHOSEN DEVICE ON THHS CHANNEL?
PUSHJ P,RELEA1## ;YES, RELEASE DEVICE
SOJGE P1,REASS2
POP P,M ;RESTORE M
MOVE F,JOBFDV##(R)
MOVE J,JOB## ;CURRENT JOB NUMBER
REASS3: MOVSI T1,DVDIRIN ;CLEAR DIRECTORY IN CORE BIT
ANDCAM T1,DEVMOD(F) ;..
EXCH J,(P)
CAMN J,(P) ;IS IT TO US?
JRST REASS6 ;YES--JUST CLEAN UP
NOSCHEDULE
PUSH P,F ;PRESERVE F
IFN FTPHYO,<
TLZ P1,PHONLY ;ENABLE LOGICAL SEARCH
>
SKIPN T1,DEVLOG(F) ;SEE IF LOGICAL NAME
;INUSE BY THAT JOB
JRST REASS5 ;NO (OR NO LOG. NAME)
IFN FTLOGIN,<
PUSHJ P,DEVLG## ;DOES JOB HAVE THIS LOGICAL NAME INUSE?
SKIPA T1,-1(P) ;NO, PHYSICAL--GET CALLER'S JOB
JRST REASE8 ;YES--ILLEGAL
MOVE T2,JBTPPN##(T1) ;GET HIS P,PN
CAME T2,FSFPPN## ;SEE IF PRIV.
CAMN T2,JBTPPN##(J) ;OR SAME GUY
JRST REASS5 ;YES--IT'S OK
JUMPL M,REASE8 ;IF COMMAND, THAT IS ONLY WAY
MOVE T2,JBTSTS##(T1) ;ELSE, SEE IF
TLNE T2,JACCT ;PRIV. PROGRAM
JRST REASS5 ;YES--IT'S OK
>
REASE8: POP P,F ;RESTORE F
SCHEDULE
MOVEI T2,ASSCON ;WAS IT ASSIGNED
TDNN T2,S ;BEFORE WE STARTED
XORM T2,DEVMOD(F) ;NO, MAKE SURE IT IS NOT ASSIGNED
JRST REASE6 ;GIVE ERROR
REASS5: POP P,F ;RESTORE F
PUSHJ P,SETDVL## ;PUT IN NEW JOB NUMBER AND ADD NAME TO LOG NAME TABLE
IFN FTMTSET,<
HRRI T1,MTSIZ##+1 ;GET DEFAULT MAGTAPE BLOCK SIZE
HLL T1,DEVMOD(F) ;
TLNN T1,DVMTA ;MAGTAPE?
JRST REASS8 ;NO,IGNORE
DPB T1,PBUFSZ##
SETZ T1,
DPB T1,TDYDN1## ;RESET ANY USER DENSITY
DPB T1,PBUFRM## ;RESET MAX FRAME-COUNT
IFN FTDX10,<
DPB T1,PMTRTY## ;ENABLE AUTO ERROR-RETRY
>
> ;END CONDITIONAL ON FTMTSET
REASS8: SCHEDULE
REASS6: POP P,J
POP P,U ;RESTORE ADDR OF TTY LDB
POP P,P1 ;RESTORE P1
TLNN M,FLMCLV ;SEE IF UUO OR COMMAND LEVEL
PJUMPL M,ESTOP## ;UUO--STOP JOB
POPJ P,
REASS7: PUSHJ P,DEASG1 ;DEASSIGN
JFCL ;IGNORE ERROR
JRST REASS6 ;GO FINISH
REASE1: POP P,T1
POP P,U ;RESTORE ADDR OF TTY LDB
POP P,P1 ;RESTORE P1
TLNE M,FLMCLV ;SEE IF UUO OR COMMAND LEVEL
JRST ATT4 ;COMMAND--ISSUE MESSAGE
REASE4: MOVEI T1,0 ;CLEAR C(AC)
SOJA M,PUTWDU##
REASE2: MOVEI T1,NOTDEV ;NO SUCH DEVICE
REASE5: POP P,T2
POP P,U ;RESTORE ADDR OF TTY LDB
POP P,P1 ;RESTORE P1
JUMPL M,(T1)
AOJA M,REASE4
REASE9: JUMPN T2,REASE3
IFN FTGALAXY,<
SKIPE %SIMDA## ;MDA RUNNING
CAMN J,MDAJOB## ;YES, IS MDA DOING THIS?
JRST REAS9E ;YES
MOVSI T1,DVCMDA ;CONTROL BIT
TDNE T1,DEVCHR(F) ;CONTROLLED?
JRST REASE3 ;YES, LOSE
>;END IFN FTGALAXY
REAS9E: MOVSI T1,DEPRAS
TDNN T1,DEVSTA(F)
JRST REAS1B
REASE3: SCHEDULE
MOVEI T1,DEAER2 ;WASN'T ASSIGNED
JRST REASE5
REASE7: SCHEDULE
EXCH J,(P) ;FUDGE CORRECT JOB ON STACK
REASE6: PJSP T1,REASE5 ;RETURN TO USER IF UUO
MOVE J,T2 ;RESTORE J IF COMMAND
MOVE T2,DEVNAM(F)
PUSHJ P,TTYFND## ;RESTORE TTY LDB
PUSHJ P,PRNAMQ
PUSHJ P,TSETBI## ;CLEAR TYPE AHEAD
MOVEI T1,REAS6M ;PICK UP MESSAGE
TLNN M,FLMCLV ;SEE IF UUO OR COMMAND LEVEL
PJRST PHOLD## ;UUO--GO HOLD JOB
JRST ERRMSN ;TYPE MESSAGE IF NOT
REAS6M: ASCIZ / can't be reassigned
/
>
SUBTTL ATTACH, DETACH AND EXCHANGE COMMANDS
IFN FTATTACH,<
;"ATTACH DEVNAM" -ATTACHES A PREVIOUSLY PARTITIONED DEVICE
; NOTE-MUST BE LOGGED IN UNDER [1,2] TO DO THIS
; "ATTACH N [PROJ.,PROG.]" - ATTACH CONSOLE TO JOB N
;CHANGES ADDRESS OF TTY DEVICE DATA BLOCK STORED IN -2(P)
;BY THE COMMAND DECODER
ATTACH::
PUSHJ P,DECIN1 ;GET JOB NO.
JRST NOTENF ;NOT A NUMBER OR NONE SPECIFIED
JRST DEVATT ;WANTS TO ATTACH A DEVICE
IFN FTLOGIN,<
TLNE P4,CMWB ;NO SKIP IF COMMAND WAS DELAYED TRYING FOR LOGIN
JRST ATTDLY ;WORK IS DONE, GO IMMEDIATELY TO LOGIN
>
PUSHJ P,GETJB1 ;VALIDATE
IFN FTLOGIN,<
MOVE S,T2 ;SAVE JOB NO.
PUSHJ P,PJPGNO ;GET PROJ.-PROG. NOS. ARG(IF ERROR, POP SUB LEVEL
; OFF 1, PRINT ERROR, AND DO NOT RETURN HERE)
SKIPN P2,T2 ;DID USER TYPE IN A PROJ,PROG # IN []'S?
MOVE P2,JBTPPN##(J) ;NO, ASSUME PROJ,PROG NUMBER FOR CURRENT JOB
; SO USER CAN AVOID TYPEING PROJPROG NO. IF GOING
; FROM 1 JOB TO ANOTHER UNDER SAME PROJ,PROG
MOVEM S,T2 ;RESTORE
CAME P2,JBTPPN##(T2) ;IS THIS THE SAME PERSON WHO DETACHED FROM
; THIS JOB NUMBER?
JRST ATT3 ;NO-ERROR
IFN FTPTYUUO,<
PUSH P,U
MOVE S,F ;SAVE DDB ADDRESS
MOVE T3,T2 ;SAVE TARGET JOB #
MOVEI T4,JOBMAX## ;UPPER LIMIT ON ITERATIONS
LDB T2,LDPLNO## ;UNIT # ON WHICH COMMAND APPEARED
PUSHJ P,CTLJB## ;IF UNIT IS A PTY, RETURN CONTROLLING JOB #
ATLCHK: JUMPL T1,ATTOK ;NOT A PTY, ITS COOL
CAIN T1,(T3) ;IS CONTROLLING JOB SAME AS TARGET JOB?
JRST ATT5 ;YES, DISALLOW
HRRZ F,TTYTAB##(T1)
PUSHJ P,CTLJBD## ;NO, LOOK AT HIS CONTROLLER, IF ANY.
SOJG T4,ATLCHK ;ITERATE FOR ALL JOBS, IF NEED BE
JRST ATT5 ;SHOULDN'T EVER GET HERE
ATTOK: MOVE T2,T3 ;RESTORE TARGET JOB
MOVE F,S ;RESTORE DDB POINTER
POP P,U
> ;END CONDITIONAL ON FTPTYUUO
PUSH P,J
MOVE J,T2 ;CAN NEW TTY ATTACH TO NEW JOB?
PUSHJ P,TTYISA##
JRST ATT2A ;NO, NO DDB OR ANOTHER DDB ATTACHED AND NOT OPR
JUMPN T1,ATTNL ;IF THERE IS SOMEONE THERE MUST BE OPR TO BE OK
;HENCE NO LOGIN REQUIRED
MOVE T1,(P) ;OLD JOB NUMBER IN CASE NOT CTY OR OPR
MOVE T1,JBTPPN##(T1) ;PPN IF OLD JOB
CAMN T1,FSFPPN## ;NO SKIP IF [1,2]
JRST ATTNL ;[1,2] DOESN'T NEED LOGIN
PUSHJ P,ISOPCT
CAMN P2,T1 ;SKIP IF CURRENT JOB NOT SAME PPN AS OBJECT JOB
JRST ATTNL ;YES, CURRENT JOB DOESN'T REQUIRE LOGIN
POP P,J ;OLD JOB #
SKIPE J ;SKIP IF NO JOB CURRENTLY
PUSHJ P,DETAC1 ;DETACH CURRENT JOB
SETZ J, ;CLEAR J SO LOGIN COMMAND WILL ASSIGN A NEW JOB
ATTDLY: POP P,T2 ;*** POP OFF WHAT WAS ON STACK (RETURN)
;*** BECAUSE WILL SIMULATE LOGIN
MOVE U,(P) ;RESTORE LINE IN CASE IT WAS CLOBBERED
MOVE T2,LOGTXT ;MAKE IT LOOK LIKE A LOGIN COMMAND
MOVEI P3,DISP ;P3=LOC OF DISPATCH TABLE
MOVE P4,[XWD-DISPL,COMTAB] ;P4=LENGTH, LOC
JRST COM1A ;*** CALL LOGIN TO VALIDATE THE ATTACH
ATTNL:
> ;END CONDITIONAL ON FTLOGIN
IFE FTLOGIN,<
PUSH P,J
MOVE J,T2 ;JOB NUMBER TO J
>
PUSHJ P,TTYATT## ;NO, ATTACH TTY
JRST ATT2A ;ERROR CAN'T ATTACH
EXCH J,0(P) ;GET OLD JOB #
SKIPE J ;IS IT 0
PUSHJ P,DETMSG ;NO. TYPE MESSAGE
POP P,J ;RESTORE J
JRST TTYFND## ;ATTACHED. GO SET UP OUTP. BYTE PTR.
DEVATT:
IFN FTLOGI,<
PUSHJ P,SETLGL ;SEE IF OPR OR [1,2]
JRST COMERA ;NOT LEGAL
>
PUSHJ P,CTXDEV ;GET DEVICE ARGUMENT
JFCL ;SHOULD NEVER RETURN
MOVE T1,T2 ;YES-SET UP DEVICE NAME
PUSHJ P,DEVSRG## ;SEARCH FOR DEVICE
IFE FTDHIA&FTDUAL,<
JRST NOTDEV ;NOT FOUND
>
IFN FTDHIA&FTDUAL,<
JRST ATT7 ;SEE IF DUAL-PORTED DISK
>
MOVE T2,DEVMOD(F)
IFN FTDHIA,<
TLNE T2,DVDSK ;DISK?
JRST ATT7 ;YES, DO IT DIFFERENTLY
>
TRNN T2,ASSCON ;WAS DEVICE DETACHED?
PJRST ATT6 ;NO ERROR
LDB T1,PJOBN## ;GET JOB NUMBER
JUMPN T1,ATT6 ;IS IT = 0?
SETZM DEVLOG(F)
DPB J,PJOBN## ;SET JOB NUMBER
IFN FTMTSET,<
HRRI T1,MTSIZ##+1 ;GET DEFAULT MAGTAPE BLOCK SIZE
HLL T1,DEVMOD(F)
TLNN T1,DVMTA ;MAGTAPE?
JRST DEVAT1 ;NO, IGNORE
DPB T1,PBUFSZ## ;RESTORE DEFAULT BLOCK SIZE
SETZ T1,
DPB T1,TDYDN1## ;CLEAR USER SET DEFAULT DENSITY
DPB T1,PBUFRM## ;CLEAR MAX FRAME-COUNT
IFN FTDX10,<
DPB T1,PMTRTY## ;ENABLE AUTO ERROR-RETRY
>
> ;END CONDITIONAL ON FTMTSET
DEVAT1: POPJ P,
ATT2A: POP P,J ;REMOVE JUNK FROM STACK
ATT2: MOVE T2,DEVNAM(F) ;PRINT PHYSICAL NAME
PUSHJ P,PRNAMQ
JSP T1,ERRMSN
ASCIZ / already attached
/
ATT5: MOVE F,S ;RESTORE DDB POINTER
POP P,U
ATT3: JSP T1,ERRMES
ASCIZ /Can't att to job
/
ATT6: JSP T1,ERRMES
ASCIZ /Wasn't det
/
IFN FTDHIA,<
;HERE TO ATTACH A DISK UNIT
ATT7: PUSHJ P,ATTDSK## ;TRY TO PUT IT ON-LINE
JRST ATT8 ;NOT DOWN OR NO SUCH UNIT
JRST DLYCM ;NEED KONTROL, CANT GET IT RIGHT NOW
POPJ P, ;UNIT IS NOW UP
ATT8: TLZE U,400000 ;IS IT A DSK?
JRST NOTDEV ;NO, "NOT A DEVICE"
JRST COMERA ;YES, "ATTACH DEV?"
;"XCHNGE UNIT UNIT - EXCHANGES THE 2 UNITS
XCHUNI: PUSHJ P,XCHDSK##
JRST COMERA ;SOME FLAVOR OF FOULUP
POPJ P, ;GOODNESS
> ;END FTDHIA
> ;END FTATTACH
;GETJOB--ROUTINE TO SCAN COMMAND FOR JOB NUMBER
;RETURNS: CPOPJ IF NULL WITH T2=THIS JOB (IF ANY) OR 0.
; CPOPJ1 IF OK WITH T2=JOB SPECIFIED, T3=JOBSTS
;GIVES ERROR (NO RETURN) IF DECIMAL IMPROPER OR NOT A JOB.
GETJOB::PUSHJ P,DECIN1 ;READ DECIMAL
POPJ P, ;NULL--RETURN
JRST COMERP ;NOT DECIMAL--ERROR
AOS (P) ;GOOD--ADVANCE RETURN
GETJB1: MOVE T1,T2 ;T1=JOB NUMBER
PUSHJ P,LGLPRC## ;SKIP IF LEGAL JOB NUMBER
JRST ATT1P ;NO - FAIL
MOVE T3,JBTSTS##(T2) ;GET TARGET JOB STATUS
TLNE T3,JNA ;SEE IF JOB NUMBER
POPJ P, ;YES--RETURN
POP P,T1 ;NO--CLEAN UP STACK
ATT4: JSP T1,ERRMES
ASCIZ /Not a job
/
ATT1P: POP P,T1 ;CLEAN UP STACK
ATT1:: JSP T1,ERRMES
ASCIZ /Illegal job number
/
IFN FTATTACH,<
;"DETACH" - DETACH CONSOLE FROM JOB
;"DETACH DEVNAM" - DETACHES DEVICE FROM THE SYSTEM SOFTWAREWISE
DETACH: PUSHJ P,CTXDEV ;GET ARGUMENT
JUMPE T2,DETAC1 ;ONLY "DET" TYPED
PUSHJ P,SAVE1## ;SAVE P1
MOVE P1,T2
IFN FTLOGI,<
PUSHJ P,SETLGL ;SEE IF OPR OR [1,2]
JRST COMERA ;NOT LEGAL
>
MOVE T1,P1 ;YES-SET UP DEVICE NAME
PUSH P,U ;SAVE ADDR OF TTY LDB
PUSHJ P,DEVPHY## ;SEARCH FOR DEVICE
IFE FTDHIA&FTDUAL,<
JRST NOTDV1 ;DEVICE NOT FOUND
>
IFN FTDHIA&FTDUAL,<
JRST DETAC3
>
MOVE T2,DEVMOD(F) ;CHECK TO SEE IF THIS IS DSK
IFN FTDHIA,<
TLNE T2,DVDSK ;TRYING TO TAKE DOWN A DISK?
JRST DETAC3 ;YES, DO IT DIFFERENTLY
>
TLNE T2,DVDSK!DVTTY ;IS IT THE DSK OR A TTY?
JRST NOTDV1 ;YES-PRINT ERROR MSG.
MOVEI T2,ASSCON ;FOUND-SET UP ASSIGNED BY CONSOLE
PUSHJ P,ASSASG## ;TRY TO ASSIGN
JRST ASSER5 ;CAN'T ASSIGN
SKIPGE DEVSPL(F) ;SPOOLED?
JRST DETAC2 ;YES
TLNE F,SYSDEV ;IS THIS SYSTEM DEVICE?
JRST NOTDV1 ;YES-PRINT ERROR MSG.
MOVEI T1,0 ;NO. SET JOB NUMBER TO ZERO
DPB T1,PJOBN## ; ..
JRST UPOPJ## ;RESTORE U AND RETURN SUCCESSFUL
DETAC1: TLNN P4,JLOG ;CAN'T DETACH
JRST ATT4 ;IF NOT LOGGED IN
PUSHJ P,DETMSG
HRRZ F,LDBDDB##(U) ;IS THERE A JOB ATTACHED?
JUMPE F,CPOPJ## ;IF NONE, DONE NOW
JRST TTYDET## ;YES. GO DETACH IT FROM LINE
DETMSG: PUSHJ P,INLMES ;TELL USER WHERE HE WAS
ASCIZ /From job /
PJRST PJOB
DETAC2: PUSHJ P,PRQM ;CAN'T DETACH A SPOOLED DEVICE
MOVE T2,DEVNAM(F) ;GET DEV NAME
PUSHJ P,PRNAME## ;TYPE IT
PUSHJ P,INLMES
ASCIZ / IS SPOOLED/
PUSHJ P,CLRDDB##
PJRST UPOPJ##
IFN FTDHIA,<
;HERE TO DETACH A DSK
DETAC3: POP P,U
PUSHJ P,DETDSK## ;TRY TO DETACH
JRST NOTDEV ;NOT A DSK
JRST COMERA ;CANT DETACH
POPJ P, ;WIN
>
> ;CLOSE FTATTACH CONDITIONAL
SUBTTL DATASET CONNECT & SYSTEM START
IFN FTMODM!FTNET,<
;DATAPHONE RESPONSE COMMANDS PHONIED UP BY SCNSER ON DATAPHONE INTERRUPTS
IFN FTATTACH,<
BYECOM=DETACH ;UNTIL THIS IS CLEVERED UP
>
IFE FTATTACH,<BYECOM==CPOPJ##>
HELLO: MOVE P2,INITXT ;GO RUN THE
PJRST RUNAME ;HELLO PROGRAM
>
;SYSTEM RESTARTED MESSAGE - COMMAND PHONIED UP BY SCNSER WHEN
; CALLED FROM IOGO
RESTRT: PUSHJ P,CRLF ;START A NEW LINE, AND
MOVEI T1,CONFIG## ;TYPE OUT CONFIGURATION NAME
PUSHJ P,CONMES ;"
PUSHJ P,PRSPC ;A SPACE
PJRST PRDTIM ;AND TIME OF DAY, CRLF.
SUBTTL DAYTIME COMMAND
;"DAYTIME" - PRINT TIME OF DAY
DAYTIM::
MOVE T1,LOCDAY## ;PRINT DAY
PUSHJ P,RADX10##
MOVE T1,LOCMON##
MOVE T1,MONTAB##-1(T1) ;MONTH
DPB T1,[POINT 21,DAMESS##,27]
MOVEI T1,DAMESS##
PUSHJ P,CONMES ;PRINT DAY
MOVE T1,LOCYER##
SUBI T1,^D1900
PUSHJ P,RADX10## ;PRINT YEAR
PUSHJ P,PRSPC
PRDTIM: MOVE T1,TIME## ;PRINT TIME OF DAY
;SUBROUTINE TO PRINT TIME OF DAY, CRLF
PRTIME: PUSHJ P,PRTIM ;PRINT TIME AS HH:MM:SS(NO CRLF)
PJRST CRLF ;AND ADD CRLF
IFN FTBCOM,<
BAONLY: JSP T1,ERRMES
ASCIZ /Batch only
/
>
SUBTTL RUNTIME ROUTINE (TIME COMMAND)
IFN FTTIME,<
;"TIME (JOB NO.)" - PRINT TOTAL AND INCREMENTAL RUNNING TIME FOR A JOB
;FOLLOWED BY KILO-CORE TICKS
;"TIME 0" IMPLIES RUNTIME FOR NULL JOB
; IF NO JOB NO. GIVEN-TIME WILL BE FOR CURRENTLY LOGGEN IN JOB NO.
RUNTIM: PUSHJ P,GETJOB ;GET JOB NO. ARG.
JRST RUN1 ;NO ARG. GIVEN - LOGGED IN?
MOVE J,T2 ;SETUP DESIRED JOB NUMBER
JRST PRTTIM ;PRINT TOTAL RUN TIME+KIL-CORE-SEC
; BUT DO NOT PRINT INCREMENTAL
RUN1:
IFE FTLOGIN,<
MOVEI T1,0 ;GET SET TO CLEAR INCREMENTAL RUN TIME
>
IFN FTLOGIN,<
MOVSI T1,JLOG ;IS JOB LOGGED IN?
TDZN T1,JBTSTS##(J) ;TEST JOB STATUS BITS AND CLEAR T1 ALWAYS
JRST NOTENF ;NO, NEED MORE ARGUMENTS
>
.EXCH T1,.PDRTM##(W) ;CLEAR INCREMENTAL TIME
PUSHJ P,PRTIME ;PRINT TIME SINCE LAST TIME COMMAND PLUS CRLF
PRTTIM: PUSHJ P,FNDPDB## ;ADDRESS OF PDB FOR JOB
TDZA T1,T1 ;NO PDB -- GIVE 0
SKIPE T1,W ;SKIP IF NO PDB - GIVE 0
.MOVE T1,.PDTTM##(W) ;GET TOTAL ACCUMULATED TIME
IFE FTKCT,<
JRST PRTIME ;PRINT IT, CRLF, AND RETURN
>
IFN FTKCT,<
JUMPE W,PRTIME ;EXIT IF NO PDB
PUSHJ P,PRTIME
PUSHJ P,INLMES ;PRINT "J*CPUSEG=
ASCIZ /kilo-core-sec=/
.MOVE T1,.PDKCT##(W) ;PRODUCT OF NO. OF J CORE* NO. OF JIFFIES RUN
> ;END OF FTKCT
> ;END OF FTTIME
;SUBROUTINE TO PRINT SECONDS, CRLF
PRTSEC: IDIV T1,TICSEC## ;CONVERT TO SECONDS FROM JIFFIES
PJRST DECLF ;PRINT IN DECIMAL, ADD CRLF
SUBTTL SEND COMMAND
IFN FTTALK,<
;ROUTINE TO SEND A LINE OF INFORMATION TO ANOTHER TTY, OR
; TO BROADCAST IT TO ALL TTY'S
SEND: PUSHJ P,SAVE2##
PUSHJ P,CTEXT1 ;GET ARGUMENT DEVICE OF SEND
JUMPE T2,NOTENF ;MUST BE ONE
IFN FTNET,<
SETZ W, ;CLEAR NODE POINTER
CAIE T3,"_" ;TERMINATED BY _
JRST SEND0 ;NO, CONTINUE NORMAL
MOVE T1,T2 ;COPY THE NODE NAME
PUSHJ P,CVTOCT## ;CHECK FOR A NUMBER
MOVE T1,T2 ;MUST BE A NODE NAME
SKIPE T1 ;NOT ZERO
PUSHJ P,SRCNDB## ;FIND THE NODE DATA BLOCK
JRST [JSP T1,ERRMES ;NODE DOES NOT EXIST
ASCIZ /Node does not exist
/]
HLRZ W,(W)
JRST SENDA ;DO A PSEUDO SEND ALL
SEND0:
>;END IFN FTNET
MOVS T1,T2 ;GET IT SWAPPED FOR COMPARES
CAIN T1,(SIXBIT /JOB/) ;PARTICULAR JOB NUMBER?
JRST SENDJ ;YES. GO FIND IT
CAIN T1,(SIXBIT /ALL/) ;BROADCAST TO ALL TTY'S?
JRST SENDA ;YES.
PUSH P,U ;SAVE LINE ADDRESS OF SENDER
MOVE T1,T2 ;GET DEVICE NAME TO SEARCH FOR
PUSHJ P,TTYPHY## ;SEE IF IT'S A TTY
JRST SENDD ;NO. FAILURE.
SENDT: HRRZ T1,0(P) ;SEE IF EITHER GUY IS THE OPR
CAME U,OPRLDB## ; ..
CAMN T1,OPRLDB## ; ..
JRST SENDT1 ;YES. DONT BUSY CHECK
MOVE T1,LDBDCH##(U) ;NO. SEE IF DEST IS AT COMMAND LEVEL
HLR T1,LDBBY2##(U) ;OR HAS ALLOWED SENDS
TDNE T1,[LDLCOM##,,L2LSND##] ;OK TO SEND?
JRST SENDT1 ;YES. OK TO SEND
IFN FTLOGI,<
EXCH U,(P) ;RESTORE U
PUSHJ P,SETLGL ;DOESN'T WANT A SEND. OVERRIDE?
JRST SNDBSY ;NO. HE'S BUSY.
EXCH U,(P) ;POINT TOGETHER
>
SENDT1: PUSHJ P,SENDHD ;SEND HEADER (CRLF, SEMI, TTY NAME)
SEND1: PUSHJ P,SNDTYI ;GET CHARACTER TO SEND OUT
JRST SEND2 ;END OF LINE
SEND3: PUSHJ P,COMTYO## ;SEND IT (DEST IN LINE)
JUMPN T3,SEND1 ;LOOP FOR MORE
SEND2: PUSHJ P,SNDEOL ;SEND CRLF, MAYBE DOT TO DEST
SENDX: ;RESTORE STACK, GET SENDER LDB
PJRST UPOPJ## ;AND RETURN FROM SEND COMMAND
;STILL IN FTTALK CONDITIONAL
;MORE OF SEND COMMAND
SENDJ: PUSHJ P,GETJOB ;GET DESIRED JOB NUMBER
JRST NOTENF ;MUST HAVE AN ARG
PUSH P,U ;OK. SAVE SENDER'S LDB
HRRZ F,TTYTAB##(T2) ;GET TTY DDB OF DEST JOB
JUMPE F,SENDF ;MUST BE ONE
HRRZ U,DDBLDB##(F) ;GET LDB ADDRESS
JUMPN U,SENDT ;AND GO SEND IT (IF NOT DETACHED)
SENDF: POP P,U ;OOPS. NO SUCH GUY. GET SENDER
JSP T1,ERRMES ;AND GIVE HIM THE BAD NEWS
ASCIZ /No such tty
/
SENDD: HLRZ T1,T1 ;CHANGE TEXT FROM AAABBB
HRLI T1,'TTY' ; TO TTYAAA
PUSHJ P,TTYPHY## ;SEE IF THAT IS GOOD
JRST SENDF ;NO
JRST SENDT ;YES
SENDA:
IFN FTLOGI,<
PUSHJ P,SETLGL ;LEGAL? (OPR OR [1,2])
JRST COMERA ;NOT LEGAL
>
PUSH P,U ;YES. STACK LDB ADR OF OPR
MOVE T1,SNDPTR ;PICK UP POINTER
MOVEM T1,SNDTMP ;SAVE IN TEMP
MOVEI T1,SNDTYO ;INTERCEPT TYPEOUT
MOVEM T1,COMTOA## ;..
MOVEI T1,^D85 ;PRESET QUOTA
MOVEM T1,SNDCNT ; SO WE DON'T WIPE
; COMCON
PUSHJ P,SENDHD ;SEND THE HEADER
MOVEI T1,CCTYO## ;RESTORE
MOVEM T1,COMTOA## ;COMTOA
SENDA1: MOVEI P1,^D85
SENDA3: PUSHJ P,SNDTYI ;GET A CHAR FROM SENDER
JRST SENDAX ;NO MORE.
SENDA4: MOVE T1,T3 ;COPY CHAR
SOSL P1
PUSHJ P,SNDTYO ;SEND TO ALL LINES
JRST SENDA3 ;LOOP TILL END OF LINE
SENDAX: MOVEI T1,FLLFLG## ;MARK SPOT FOR
IDPB T1,SNDTMP ;CRLF
MOVSI T1,LPLSAP## ;SEND ALL PENDING
IDPB T1,SNDTMP ;MAKE ASCIZ
MOVNI U,1 ;LOOP OVER ALL LINES
JRST SENDX1 ;..
SENDX2: LDB U,LDPLNO## ;GET NEXT LINE
CAIL U,TTPLEN##-1 ;DONE?
JRST UPOPJ## ;YES.
SENDX1: HRRZ U,LINTAB##+1(U) ;NO--GET NEXT LDB
MOVE T1,LDBDCH##(U) ;GET BITS
PUSHJ P,SHDSND ;SHOULD WE DO A SEND?
SKIPA ;YES
JRST SENDX2 ;NO--TRY NEXT LINE
MOVSI T1,LPLSAP## ;SET UP FLAG
MOVE T2,SNDPTR ;POINTER
CONO PI,PIOFF## ;NO INTERRUPTS HERE
SKIPN LDBFLP##(U) ;POINTER SET UP?
JRST [MOVEM T2,LDBFLP##(U) ;NO-SET NEW POINTER
JRST .+2]
IORM T1,LDBPAG##(U) ;YES--SET FLAG
CONO PI,PION##
SKIPL LDBDCH##(U)
PUSHJ P,TOPOKE## ;START TTY
JRST SENDX2 ;LOOP FOR MORE
;STILL IN FTTALK CONDITIONAL
;MORE OF SEND COMMAND
;SUBROUTINE TO GET CHARACTER FROM SENDER, WHOSE LDB IS ON STACK
SNDTYI: EXCH U,-1(P) ;GET SENDER'S LDB
PUSHJ P,COMTYI## ;GET HIS CHARACTER AND ITS BITS
EXCH U,-1(P) ;RESTORE LINE OF SENDEE
TLNE T1,CHBRK## ;IS THIS AN END OF LINE?
POPJ P,0 ;YES. NON-SKIP RETURN FROM SNDTYI
CAIE T3,"H"-100 ;FILTER ^H
TLNE T1,CHUAE## ;NO. IS IT A LOSING CONTROL CHAR?
JRST SNDTYI ;YES. FILTER IT OUT
JRST CPOPJ1## ;NORMAL CHAR. SKIP RETURN
SENDHD: PUSHJ P,INLMES ;SEND START OF SEND MESSAGE
BYTE(7)15,12,7,";",";",0 ;CR,LF,BELL
EXCH U,-1(P) ;GET SENDER'S LDB ADR
IFN FTPTYU,<
MOVE T1,J ;SET UP T1 FOR FIRST TIME THROUGH
MOVE T3,U ;SAVE U IN CASE OF ERROR
MOVEI T4,^D20 ;MAX DEPTH
IFN FTTLIM,<
SENDH1: MOVE T2,JBTLIM##(T1) ;IS SENDER A
TLNE T2,(JB.LBT) ;BATCH SUBJOB?
JRST SENDH3 ;YES, NEVER SAY OPR
> ;END IFN FTTLIM
PUSHJ P,CTLJBU## ;FIND CONTROL JOB
JUMPE U,SENDH2 ;DETACHED JOB
JUMPL T1,SENDH3 ;FOUND A TTY
MOVE F,TTYTAB##(T1) ;CONTROLLING TTY
HRRZ U,DDBLDB##(F) ;HIS LINE
SOJG T4,SENDH1 ;LOOK FOR NEXT PTY
SENDH2: MOVE U,T3 ;RESTORE U
> ;END FTPTYU
SENDH3:
IFN FTPTYU,<
PUSH P,T3 ;SAVE POINTER TO PTY LDB
>
PUSHJ P,TTYNAM## ;CONVERT TO REAL NAME IN SIXBIT
IFN FTPTYU,<
POP P,T3
>
CAMN U,OPRLDB## ;IS IT THE OPR?
MOVSI T2,(SIXBIT /OPR/) ;YES. SAY OPR INSTEAD
IFN FTPTYU,<
MOVE U,-1(P) ;RESTORE RECIPIENT
MOVEM T3,-1(P) ;PUT PTY POINTER ON STACK
>
IFE FTPTYU,<
EXCH U,-1(P)
>
PUSHJ P,PRNAME## ;OUTPUT THE NAME TO SENDEE
PUSHJ P,INLMES ;AND SPACER
ASCIZ /: - / ; ..
POPJ P,0 ;RETURN FROM SENDHD
SNDEOL: PUSHJ P,CRLF ;SEND CR LF TO LINE IN U
MOVE T1,LDBDCH##(U) ;SEE IF DEST IS AT COM LEVEL
TLNE T1,LDLCOM## ; ..
PUSHJ P,PRPER ;YES. SEND A DOT TOO
POPJ P,0 ;RETURN FROM SNDEOL
SHDSND: SKIPL LDBOFL##(U) ;SKIP IF OFF LINE?
TRNE T1,LDRPTY## ;DON'T SEND TO A PTY
JRST CPOPJ1## ;WHICH THIS IS
IFN FTNET,<
JUMPE W,SHDND1 ;ANY PARTICULAR NODE SPECIFIED
CAME W,JBTLOC## ;CHECK FOR THE LOCAL NODE
JRST SHDND0 ;REMOTE LINE
TRNN T1,LDRREM## ;LOCAL NODE IS THIS A LOCAL LINE
JRST SHDND1 ;YES, CONTINUE
SHDND0: HLRZ T4,LDBREM##(U) ;GET THE NODE ADDRESS OF REMOTE LINE
JUMPE T4,CPOPJ1## ;UNASSIGNED LINE
HLRZ T4,(T4)
CAIE T4,(W) ;IS THIS LINE ON THAT NODE
JRST CPOPJ1## ;NO, RETURN
SHDND1:
>;END IFN FTNET
PUSH P,T1 ;SAVE T1
LDB T1,LDPLNO## ;GET LINE # INTO T1
PUSHJ P,XTCTTY## ;CHECK ON DA-28 LINE
PJRST TPOPJ1## ;INACTIVE LINE - SKIP RETURN
JFCL ;ACTIVE LINE - OK
POP P,T1 ;NORMAL RETURN - RESTORE T1
HRRZ T4,LDBDDB(U) ;GET DDB ADDRESS
JUMPE T4,SHSND1 ;JUMP IF NO DDB
MOVE T4,DEVIOS(T4) ;GET IN IT MODE
TRNE T4,I ;IMAGE MODE?
JRST CPOPJ1## ;YES--DO NOT SEND
SHSND1: MOVE T4,LDBBY2##(U) ;GET GAG FLAG
TLNE T1,LDLSLV## ;IF NOT SLAVE
TLNE T4,L2LSND## ;OR NOT GAGGED
POPJ P, ;OK
JRST CPOPJ1## ;DON'T SEND TO GAGGED SLAVE
SNDTYO: PUSHJ P,PEVEN8## ;ADD PARITY
SOSL SNDCNT ;SKIP IF NO ROOM
IDPB T3,SNDTMP ;STORE BYTE
POPJ P, ;RETURN
$LOW
SNDCNT::EXP ^D85
SNDTMP::POINT 9,SNDTXT ;ACTIVE POINTER
SNDPTR::POINT 9,SNDTXT ;VIRGIN POINTER
SNDTXT: BLOCK ^D85/4+1 ;BUFFER
SNDMXL==:<.-SNDTMP>B26
$HIGH
> ;END OF FTTALK CONDITIONAL
SNDBSY: POP P,T1 ;REMOVE SENDEE FROM STACK
SNDBSI: JSP T1,ERRMES ;TYPE ERROR AND RETURN
ASCIZ /Busy
/
SUBTTL VERSION COMMAND & PRVERS SUBROUTINE
IFN FTVERS,<
;"VERSION" -- COMMAND TO PRINT LOW+HISEG NAME+VERSION
;FORMAT IS: LOWNAM LOWVER[+[HINAM HIVER]]
;HISEG STUFF ONLY IF VERSION DIFFERENT OR NAME NON-ZERO
; AND DIFFERENT
;IF HISEG NAME ZERO, HINAM IS OMITTED
;IF NO HISEG, "+" IS OMITTED
;VERSION IS ALWAYS IN FORM VER LET(EDIT)-CUST.
VERCOM:
VERBTH::MOVE T2,JBTNAM##(J) ;GET LOW NAME
PUSHJ P,PRNAME## ;PRINT IT
PUSHJ P,PRSPC ;AND SPACE
MOVE T1,.JBVER##(R) ;GET LOW VERSION
IFN FT2REL,<
PUSHJ P,PRVERS ;PRINT IT
VERHGH::PUSHJ P,SAVE2##
SKIPG P1,JBTSGN##(J) ;GET HI-SEG
POPJ P, ;NONE--ALL DONE
PUSHJ P,INLMES ;INDICATE HI-SEG
ASCIZ / + /
IFN FTVM,< ;SEG NO. IN J
EXCH J,P1
LDB T1,JBYHSO## ;GET START PAGE OF SEG
EXCH J,P1 ;RESTORE J
LSH T1,P2WLSH## ;START ADR
PUSHJ P,FLTST## ;IN CORE?
JRST [CAME P2,VERTXT
POPJ P,
PJRST DAECOM] ;NO, HAVE DAEMON DO IT
>
MOVE P2,JBTADR##(P1)
SKIPN T2,JBTNAM##(P1) ;GET HI NAME
MOVE T2,.JBHNM##(P2) ;BLANK--USE SAVE
SKIPE T1,.JBHVR##(P2) ;GET HIGH VERSION
CAMN T1,.JBVER##(R) ; COMPARE TO LOW IF PRESENT
CAME T2,JBTNAM##(J) ;COMPARE TO LOW NAME
JRST VERHG1 ;DIFFERENT--PRINT
JRST VERHG2
VERHG1: PUSHJ P,PRNAME## ;PRINT HI HAME
PUSHJ P,PRSPC ;AND SPACE
MOVE T1,.JBHVR##(P2) ;GET HI VERSION
PUSHJ P,PRVERS ;PRINT VERSION #
VERHG2: MOVE T1,JBTSTS##(P1) ;GET HISEG FLAGS
TLNE T1,SHRSEG ;SHARE SEG?
POPJ P,0 ;YES
PJSP T1,CONMES ;NO--WARN USER
ASCIZ " Not sharable "
> ;END FT2REL,
;PRINT VERSION FROM T1 ;FALL HERE
PRVERS: PUSHJ P,SAVE1##
PUSH P,T1 ;SAVE FOR LATER
LSH T1,-^D24 ;POSITION MAJOR VERSION
ANDI T1,777 ;CLEAR JUNK
SKIPE T1 ;IF NON-ZERO,
PUSHJ P,PRTDI8## ; PRINT IN OCTAL
HLRZ T1,(P) ;GET MINOR VERSION
ANDI T1,77 ;CLEAR JUNK
JUMPE T1,PRVER2 ;IF NON-ZERO,
SUBI T1,1 ;
IDIVI T1,^D26 ; PRINT IN ALPHA
JUMPE T1,PRVER1 ; ONE OR TWO
PUSH P,T2 ; CHARACTERS
MOVEI T3,"A"-1(T1) ; ..
PUSHJ P,COMTYO## ; ..
POP P,T2 ; ..
PRVER1: MOVEI T3,"A"(T2) ; ALSO, SECOND ONE
PUSHJ P,COMTYO## ; ..
PRVER2: HRRZ T1,(P) ;GET EDIT NUMBER
JUMPE T1,PRVER3 ;IF NON-ZERO,
PUSHJ P,INLMES ; PRINT (
ASCIZ /(/
HRRZ T1,(P) ; GET EDIT NUMBER
PUSHJ P,PRTDI8## ; PRINT IN OCTAL
PUSHJ P,INLMES ; PRINT )
ASCIZ /)/
PRVER3: POP P,P1 ;GET CUST. NUMBER
LSH P1,-^D33 ;POSITION
JUMPE P1,CPOPJ## ;IF NON-ZERO,
PUSHJ P,INLMES ; PRINT -
ASCIZ /-/
MOVEI T3,"0"(P1) ; GET DIGIT
PJRST COMTYO## ; PRINT AND RETURN
> ;END FTVERS
SUBTTL EXAMINE AND DEPOSIT COMMAND
IFN FTEXAMINE,<
;"EXAMINE LOC" - LOOKS A CONTENTS OF LOC AND PRINTS IN OCTAL
;IF LOC IS MISSING, NEXT LOC IS PRINTED
;IF PREVIOUS WAS E COMMAND, SAME LOC IF PREVIOUS WAS D COMMAND
;TAB. IS PRINTED INSTEAD OF CRLF(LIKE DDT)
ECOM:
SKIPGE JOBEXM##(R) ;WAS PREVIOUS D OR E COMMAND, A D COMMAND?
AOS JOBEXM##(R) ;NO, IT WAS AN E, INCREMENT IN CASE HE TYPES NO ARG
ECOM1: HRROS JOBEXM##(R) ;YES, FLAG THAT E HAPPENED LAST(LH=-1)
PUSHJ P,OCTIN1 ;GET OCTAL LOCATION
SKIPA T2,JOBEXM##(R) ;NONE SPECIFIED, USE LAST LOC OF D OR NEXT OF E
JRST COMERA ;ILLEGAL CHARACTER
PUSHJ P,DEAT ;CHECK FOR AC REFERENCE AND STORE JOBEXM
HRR M,T2 ;IGNORE LH
IFN FTVM,<
HRRZ T1,T2 ;ADDRESS BEING EXAMINED
PUSHJ P,FLTTC## ;WILL DOING AN EXAMINE CAUSE A PAGE FAULT?
JRST ECOMA ;NO, BUT OUT OF BOUNDS
IFE FTDAEM,<
JRST ECOMA ;YES, SAY OUT OF BOUNDS
>
IFN FTDAEM,<
PJRST DAECOM ;YES, START UP DAEMON TO DO IT
>
MOVEI T1,0 ;ASSUME ALLOCATED BUT ZERO PAGE
CAIN T4,PM.ZER ;PAGE ALLOCATED BUT ZERO?
JRST ECOM2 ;YES, PRINT 0
>
PUSHJ P,GETWRD## ;GET WORD FROM LOW OR HIGH SEG
JRST ECOMA ;ERROR, OUT OF BOUNDS
ECOM2: PUSH P,T1 ;SAVE CONTENTS OF LOC TO BE PRINTED
HRRZ T1,JOBEXM##(R) ;PRINT LOC BEING EXAMINED
PUSHJ P,OCTPNT##
PUSHJ P,INLMES ;PRINT SLASH TAB
ASCIZ */ *
HLRZ T1,(P) ;PRINT LEFT HALF
PUSHJ P,OCTPNT##
PUSHJ P,INLMES ;PRINT SPACE
ASCIZ / /
HRRZ T1,(P) ;PRINT RIGHT HALF
PUSHJ P,OCTPNT##
PUSHJ P,INLMES ;PRINT FINAL TAB
ASCIZ / /
IFN FTKI10!FTKL10,<
PUSHJ P,CLRASA ;CLEAR AC'S IN SHADOW AREA FLAG
>
JRST TPOPJ## ;POP P,T1,POPJ P,
;"DEPOSIT LH RH LOC" - DEPOSITS XWD LH,RH IN LOCATION LOC
;IF LOC IS MISSING, ASSUME NEXT LOC IF PREVIOUS D, SAME LOC IF PREVIOUS E
DCOM: PUSHJ P,SAVE1##
PUSHJ P,OCTIN1 ;GET LH
JRST NOTENF ;NOT ENOUGH ARGUMENTS
JRST COMERA ;ILLEGAL CHARACTER
HRLM T2,S ;SAVE LH
PUSHJ P,OCTIN1 ;GET RH
JRST NOTENF ;NOT ENOUGH ARGUMENTS
JRST COMERA ;ILLEGAL CHARACTER
HRRM T2,S ;SAVE RH
MOVE P1,JOBEXM##(R) ;WAS PREVIOUS D OR E AN E COMMAND?
; LH=-1 IF E, LH=0 IF D
JUMPL P1,DCOM1 ;JUMP IF YES
AOS P1,JOBEXM##(R) ;NO, INCREMENT IN CASE USER TYPED NOT THIRD ARG
; FOR SUCCESSIVE D'S
DCOM1:
HRRZS JOBEXM##(R) ;FLAG THAT A D WAS DONE LAST(LH=0)
PUSHJ P,OCTIN1 ;GET LOC
SKIPA T2,P1 ;NOT SPECIFIED, USE LAST OF E OR NEXT OF D
JRST COMERA ;ILLEGAL CHARACTER
IFN FT2REL,<
PUSHJ P,CHKMED## ;CHECK TO SEE IF HIGH SEG IS SHARABLE
; IF YES, SET USER-MODE WRITE PROTECT (UWP) ON
; FOR THIS USER, AND SET MEDDLE FOR THIS USER
; SO HE CANNOT TURN UWP OFF
>
PUSHJ P,DEAT ;CHECK FOR AC REFERENCE
IFN FTVM,<
HRRZ T1,T2 ;ADDRESS BEING DEPOSITED INTO
PUSHJ P,FLTTC## ;WILL DOING A DEPOSIT CAUSE A PAGE FAULT?
JRST ECOMA ;NO, BUT OUT OF BOUNDS
IFE FTDAEM,<
JRST ECOMA ;YES, SAY OUT OF BOUNDS
>
IFN FTDAEM,<
PJRST DAECOM ;YES, START UP DAEMON TO DO IT
>
CAIN T4,PM.ZER ;PAGE ALLOCATED BUT ZERO?
PJRST CREPAG## ;YES, MAKE IT COME TO LIFE
>
MOVE T1,S ;SETUP UP ARG TO PUTWRD
HRR M,T2
PUSHJ P,PUTWRD## ;TRY TO STORE THE WORD IN THE USER'S AREA
JRST ECOMA ;OUT OF BOUNDS
IFN FTKA10,<
POPJ P, ;RETURN
>
IFN FTKI10!FTKL10,<
PJRST CLRASA ;CLEAR AC'S IN SHADOW AREA FLAG
>
DEAT: TLZ T2,-1 ;CLEAR LH IN CASE THIS IS A SUCCESSIVE E WITH NO ARG
HRRM T2,JOBEXM##(R) ;STORE FOR NEXT TIME, DO NOT TOUCH LH(D OR E LAST)
; YES, WAS JOB STOPPED IN USER MODE?
CAIL T2,20 ;IS IT AN AC?
POPJ P, ;NO
MOVE T1,JOBPC##(R)
IFN FTKI10!FTKL10,<
CAME J,.C0JOB## ;CURRENT JOB?
PUSHJ P,SETASA ;NO, INDICATE AC'S ARE IN THE SHADOW AREA
POPJ P, ;RETURN
>
IFN FTKA10,<
TLNE T1,USRMOD ;USER MODE?
ADDI T2,20 ;YES USER ACS ARE AT 20 INSTEAD OF 0
POPJ P,
>
ECOMA:
IFN FTKI10!FTKL10,<
PUSHJ P,CLRASA ;CLEAR AC'S IN SHADOW AREA FLAG
>
JSP T1,ERRMES ;OUT OF BOUNDS
OUTBMS::ASCIZ /Out of bounds
/
> ;END CONDITIONAL ON FTEXAMINE
IFN FTLOGIN,<
;"SCHEDULE" TYPES OUT RH OF STATES, LEGAL FOR ALL.
SKEDUL:
IFE FTSET,< ;IF NO SET COMMAND GIVE A WAY TO SET STATES
PUSHJ P,OCTIN ;GET THE ARG IF ANY
JRST SKED1 ;NO ARG
JRST COMERA ;BAD SYNTAX IN OCTAL NUMBER
MOVE P2,T2 ;SAVE ARG IN PRESERVED AC
PUSHJ P,SETLGL ;SEE IF LEGAL FOR THIS USER
JRST COMERR
HRRM P2,STATES## ;STORE ARG IN RH OF STATES
POPJ P,
SKED1:
> ;END CONDITIONAL ON FTSET
HRRZ T1,STATES## ;SCHEDULE WITH NO ARGUMENTS.
PUSHJ P,OCTPNT## ;PRINT RH OF STATES.
JRST CRLF ;AND RETURN WITH A CRLF
>
;"BLANK" OR NO ALPHA NUMERIC BEFORE BREAK CHAR COMMAND
;DISPATCHED TO LIKE ANY OTHER COMMAND(0 IN COMMAND TABLE)
CBLANK: REPEAT 1,< ;WAIT FOR NEXT BATCON AND 5.07
MOVE T3,TTCMCH## ;GET BREAK CHARACTER
CAIE T3,12 ;WAS BREAK A LINE-FEED?
PJRST COMERA ;NO--ERROR
>
POPJ P, ;YES--NULL COMMAND
SUBTTL TTY COMMAND AND SET TTY COMMAND
;TTY [DEV[:]] [NO] WORD ;SETS OR CLEARS BITS IN LDBDCH FOR TTY LINE
;DEV ARGUMENT LEGAL ONLY IF ASSIGNED TO YOU OR YOU ARE OPR
TTYCMD: PUSHJ P,SAVE2## ;SAVE P1
PUSH P,U ;SAVE TYPING TTY'S LDB
HRRZ P1,U ;ASSUME HIS WILL BE OBJECT
PUSHJ P,CTEXT1 ;GET AN ARGUMENT
CAIE T3,":" ;DEVICE?
JRST TTYC1 ;NO. A WORD.
MOVE T1,T2 ;GET THE DEVICE.
PUSHJ P,GETDDB## ;AND FIND OUT WHERE IT IS
JRST TTYCE ;NOT A TTY. ERROR.
PUSHJ P,TTYKLQ## ;KILL TTY DDB IF NOT NEEDED
HRRZ P1,U ;STORE AS OBJECT OF COMMAND
MOVE U,0(P) ;RESTORE LDB FOR TYPER
PUSHJ P,SKIPS ;DISCARD THE COLON
JRST TTYCE ;SHOULDNT BE END OF LINE
HRRZ P2,U ;SEE IF THIS IS OPR
PUSHJ P,SETLGL ;SKIP IF OPR
CAIN P2,(P1) ;HIS OWN TTY?
JRST TTYCL ;YES. OK.
LDB T2,PJOBN## ;NO. WHO OWNS THE TTY IN QUESTION
MOVE T1,LDBDCH##(P1) ;AND IS IT SLAVED?
CAIN T2,(J)
TLNN T1,LDLSLV## ;CHECK THESE TWO CRITERIA
JRST TTYCE ;NOT SLAVED BY TYPER. ERROR.
TTYCL: MOVE U,0(P) ;RESET LINE TO TYPER
PUSHJ P,SKIPS1 ;SEE IF ANY MORE ON LINE.
IFN FTCAFE,<
JRST [MOVE U,P1 ;POINT TO TARGET
MOVEI T1,ISRCHP## ;CHANGE HARDWARE PARAMETERS
PUSHJ P,@LDBISR##(U) ;UPDATE THEM NOW
JRST UPOPJ##];RESTORE U AND RETURN
> ;END IFN FTCAFE
IFE FTCAFE,<
JRST UPOPJ## ;RESTORE U AND RETURN
> ;END IFE FTCAFE
PUSHJ P,CTEXT1 ;YES. SEE WHAT IT IS
TTYC1: MOVE T1,[-TTCWDN,,TTCWDT] ;POINT TO NAMES
PUSHJ P,FNDNAM ;FIND ABBREV.
JRST TTYCE ;ERROR
HRRZ T2,TTCWDD(T1) ;GET RESULT
PUSHJ P,(T2) ;DISPATCH TO ROUTINE
JRST TTYCE ;ERROR
JRST TTYCL ;LOOK FOR MORE
TTYCE: POP P,U ;RESTORE LINE FROM STACK
JRST COMERR ;AND GO COMPLAIN.
;TABLE FOR SET TTY COMMAND
;MACRO HAS 4 ARGUMENTS:
; NAME - WORD USED IN TTY COMMAND
; DISP - DISPATCH LOCATION TO PROCESS WORD
; OFST - OFSET WITHIN LDB WHERE ANSWER IS STORED
; DATA - 18 BITS OF DATA USED BY PROCESSING ROUTINE
DEFINE TTNAME,<
TT ALTMODE,TTCCLR,LDBPAG##,LPLALT##
IFN FTTBLK,<
TT BLANKS,TTCCLR,LDBPAG##,LPLBLK##
> ;END FTTBLK
TT COPY,TTCESC,"_","^"
TT CRLF,TTCCLR,LDBDCH##,LDLNFC##
IFN FT2741!FTNET,<
TT DEBREAK,TTCSET,LDBISR##,LILDBK##
> ;END FT2741!FTNET
TT ECHO,TTCCLR,LDBDCH##,LDLLCP##
IFN FTCAFE&FT2741!FTNET,<
TT ELEMENT,TTCELE,0,0
> ;END FTCAFE&FT2741!FTNET
TT FILL,TTCNUM,LDPFLC##,3
TT FORM,TTCSET,LDBDCH##,LDLFRM##
TT GAG,TTCCLR,LDBBY2##,L2LSND##
TT HOLD,TTCESC,"\",<"[">
IFN FTCAFE,<
TT IGNORE,TTCIGN,0,0
> ;END FTCAFE
TT LC,TTCCLR,LDBDCH##,LDLLCT##
TT NO,TTCNO,0,0
IFN FTTPAG,<
TT PAGE,TTCPAG,LDPPSZ##,77
> ;END FTTPAG
TT RTCOMP,TTCSET,LDBISR##,LILRTC##
TT SLAVE,TTCSLV,LDBDCH##,LDLSLV##
IFN FTCAFE!FTNET,<
TT SPEED,TTCSPD,0,0
> ;END FTCAFE!FTNET
TT TABS,TTCSET,LDBDCH##,LDLTAB##
TT TAPE,TTCSET,LDBBY2##,L2LTAP##
IFN FTCAFE,<
IFN FT2741,<
TT TIDY,TTCSET,LDBISR##,LILTDY##
>> ;END FTCAFE AND FT2741
TT UC,TTCSET,LDBDCH##,LDLLCT##
TT WIDTH,TTCNUM,LDPWID##,<^D17*^O1000+^D200>
IFN FTPATT,<
TT .PATCH,TTYCL,0,0
> ;END FTPATT
> ;END TTNAME MACRO
XALL
DEFINE TT(NAME,DISP,OFST,DATA),<
<SIXBIT /NAME/>
>
$LOW
TTCWDT::TTNAME
TTCWDN==.-TTCWDT
TTCMXL==:<TTCWDN-1>B26
$HIGH
$HIGH
DEFINE TT(WORD,DISP,OFST,DATA)<
XWD OFST,DISP
>
TTCWDD: TTNAME
DEFINE TT(WORD,DISP,OFST,DATA)<
XWD DATA,0
>
TTCDAT: TTNAME
SALL
;HERE TO PROCESS 'TTY SPEED'
IFN FTCAFE!FTNET,<
TTCSPD: PUSHJ P,NUMARG ;GO GET THE NUMBER
POPJ P,0 ;MUST BE ONE
PUSHJ P,TTCSP1 ;FIND SPEED IN TABLE
POPJ P,0 ;NO THERE
EXCH U,P1 ;FLIP AROUND POINTERS
DPB P2,LDPRSP## ;SET RECEIVE SPEED
EXCH U,P1 ;GET ACS BACK
MOVE P2,T2 ;SAVE OLD ANSWER
PUSHJ P,NUMARG ;GET NEW NUMBER
MOVE T2,P2 ;RESTORE LAST VALUE
PUSHJ P,TTCSP1 ;FIND SPEED IN TABLE
POPJ P,0 ;COMMAND ERROR IF NOT THERE
MOVE U,P1 ;SETUP U
DPB P2,LDPTSP## ;TRANSMIT SPEED
JRST CPOPJ1## ;GOOD RETURN
TTCSP1::MOVSI P2,-LSPLEN ;LENGTH OF TABLE
CAME T2,LSPTAB(P2) ;IS THIS IT?
AOBJN P2,.-1 ;NO--KEEP LOOKING
JUMPL P2,CPOPJ1## ;FOUND
POPJ P,0 ;LOST
RADIX 10
LSPTAB:: EXP 0,50,75,110,134,150,200,300,600,1200,1800,2400,4800,9600,1,2
LSPLEN==:.-LSPTAB
RADIX 8
;STILL IN FTCAFE!FTNET
;HERE TO PROCESS 'TTY ELEMENT'
SET987: SKIPA T2,[EXP ^D987]
SET988: MOVEI T2,^D988
MOVE P1,U
JRST TTCEL1
TTCELE: PUSHJ P,NUMARG ;GO GET THE NUMBER
POPJ P,0 ;MUST BE ONE
TTCEL1: MOVE T3,T2 ;SETUP CORRECT AC
IFN FTNET,<
MOVEI T1,LDRREM## ;GET REMOTE BIT
TDNE T1,LDBDCH##(P1) ;CHECK IT
JRST TTCEL2 ;YES, CONTINUE
>
SKIPL LDBISR##(P1) ;IS THIS A DC76 LINE?
JRST CPOPJ1## ;NO--MAKE A NO OP
IFN FTNET,<
TTCEL2:
>
EXCH U,P1 ;D76ELE USES LDPLNO
MOVEI T1,ISRELE## ;FUNCTION
PUSHJ P,@LDBISR(U) ;CALL ISR
SOS (P) ;PASS ON NON-SKIP
EXCH P1,U ;RESTORE AC'S
JRST CPOPJ1## ;RETURN
;STILL IN FTCAFE!FTNET
;HERE TO PROCESS TTY IGNORE
TTCIGN: MOVE U,P1 ;COPY LDB ADDRESS
LDB T1,LDPTSP## ;GET TRANSMIT SPEED
SKIPL P1 ;SKIP IF 'NO'
SETZM T1 ;NO--CLEAR T1
DPB T1,LDPRSP## ;SET TO RECEIVE SPEED
TLZ P1,-1 ;CLEAR YES/NO FLAG
JRST CPOPJ1## ;RETURN
> ;END FTCAFE!FTNET
;HERE TO DO 'TTY PAGE'
IFN FTTPAG,<
TTCPAG: PUSH P,T1 ;SAVE INDEX
MOVEI T1,LDBPAG##(P1) ;ADDRESS OF WORD
MOVSI P2,LPLPAG## ;PAGE BIT
PUSHJ P,TTCST1 ;GO SET OR CLEAR IT
JFCL ;CAN NOT MISS
POP P,T1 ;RESTORE INDEX
PJRST TTCNUM ;AND PROCESS THE NUMBER
> ;END FTTPAG
;HERE TO DO 'TTY SLAVE'
TTCSLV: PUSH P,T1 ;SLAVE INDEX
PUSH P,U ;CLEAR
MOVEI U,(P1) ;TARGET'S INPUT
PUSHJ P,TSETBI ;CLEAR INPUT BUFFER
POP P,U
POP P,T1 ;RESTORE INDEX
SKIPL P1 ;WANT TO CLEAR?
JRST TTCSET ;NO--LEAVE LDLCOM ALONE
MOVSI P2,LDLCOM## ;YES--SET LINE INTO
IORM P2,LDBDCH##(P1) ; COMMAND MODE
PJRST TTCSET ;GO SET SLAVE BIT
;HERE TO SET/CLEAR BITS IN THE LDB
TTCCLR: TLC P1,-1 ;COMPLEMENT THE SENSE
TTCSET: MOVE P2,TTCDAT(T1) ;PICK UP FLAG
HLRZ T1,TTCWDD(T1) ;PICK UP OFFSET
ADD T1,P1 ;GET ACTUAL ADDRESS
TTCST1: SKIPL P1 ;WANT TO CLEAR?
SKIPA T2,[IORM P2,(T1)] ;NO--GO SET
MOVSI T2,(ANDCAM P2,(T1)) ;YES--CLEAR
XCT T2
HRRZ P1,P1 ;CLEAR FLAG
PJRST CPOPJ1## ;SKIP RETURN
;HERE ON THE WORD NO
TTCNO: TLC P1,-1 ;COMPLEMENT FLAG
JRST CPOPJ1## ;SKIP RETURN
;HERE TO SEND AN ESCAPE SEQUENCE
TTCESC: PUSH P,T1 ;SAVE T1
MOVEI T3,33 ;SEND OUT AN
PUSHJ P,COMTYO## ; ESCAPE
POP P,T1 ;RESTORE INDEX
HLRZ T3,TTCDAT(T1) ;ASSUME NORMAL COMMAND
SKIPGE P1 ;DID HE SAY NO?
HLRZ T3,TTCWDD(T1) ;YES--GET ALTERNATE BYTE
PUSHJ P,COMTYO## ;SEND TO TTY
JRST CPOPJ1## ;GOOD RETURN
;HERE TO PROCESS A NUMBER
TTCNUM: PUSH P,T1 ;SAVE INDEX
PUSHJ P,NUMARG ;GO READ A NUMBER
MOVEI T2,0 ;NONE THERE DO DEFAULT
POP P,T1 ;RESETORE INDEX
LDB P2,[POINT 9,TTCDAT(T1),8] ;IS NUMBER BELOW
CAMGE T2,P2 ;THE MIN VALUE
POPJ P,0 ;YES
LDB P2,[POINT 9,TTCDAT(T1),17] ;IS NUMBER ABOVE
CAMLE T2,P2 ;THE MAX
POPJ P,0 ;YES -- ERROR
HLRZ T1,TTCWDD(T1) ;ADDRESS OF BYTE POINTER
EXCH U,P1
DPB T2,(T1) ;STORE
EXCH U,P1
TLZ P1,-1 ;CLEAR THE "CLEAR" FLAG
JRST CPOPJ1## ;SKIP RETURN
SUBTTL FINISH AND CLOSE COMMANDS
IFN FTFINISH,<
; "FINISH DEVICE" - CLOSES,RELEASE AND DEASSIGNS DEVICE
;JOB MUST HAVE CORE
CFINI: TDZA T1,T1 ;FINISH - SET T1=0
CLSCOM: SETO T1, ;CLOSE - T1=-1
MOVEM T1,JOBFDV##(R) ;SAE WHICH COMMAND IN JOBDAT
PUSHJ P,CTXDEV ;GET DEVICE NAME
JUMPE T2,FINALL ;ALL DEVICES IF NO OTHER ARG
IFE FTDISK,<
SKIPA T1,T2 ;SEARCH FOR SIXBIT DEVICE NAME
>> ;END CONDITIONAL ON FTFINISH
IFE FTDISK,<
CFINS: MOVE T1,SYSTAP## ;HERE ON CONTROL C ON SYSTEM TAPE USER
; DO A FINISH SYS COMMAND FOR HIM
>
IFN FTDISK&FTFINISH,<
MOVE T1,T2
>
IFN FTFINISH!<FTDISK+1>,<
PUSH P,U ;SAVE ADDR OF TTY LDB
PUSHJ P,DEVSRG##
JRST NOTDV1 ;PRINT NOT A DEVICE
HRRM F,JOBFDV##(R) ;STORE DDB ADR. IN JOB DATA AREA
POP P,U ;RESTORE ADDR OF TTY LDB
IFE FTNET,<
MOVEI T1,ASSPRG ;SEE IF
TDNN T1,DEVMOD(F) ; OPEN
JRST [SKIPGE JOBFDV##(R) ;SEE IF FIN
JRST .+1 ;NO -- DO IT ANYWAY
TLZ M,NOPER!NOCRLF!TTYRNU
TLO M,CMWRQ ;FIX FLAGS FOR DEASSIGN
PJRST DEASI1] ;GO DEASSIGN
>
PJSP T2,MSTART## ;SETUP MONITOR JOB AND RETURN
; RETURN HERE AT UUO LEVEL WHEN SCHEDULED
JSP T1,MONSTR## ;SETUP ACS,R,P
HRRZ F,JOBFDV##(R) ; AND R
PUSHJ P,CFIN ;DO THE ACTUAL FIN (OR CLOSE)
JRST CFINIX ;STOP JOB SO HE CANNOT CONTINUE
;SUBROUTINE TO DO ACTUAL FIN
CFIN: PUSHJ P,SAVE1## ;SAVE P1
MOVE P1,USRHCU## ;HIGHEST USER CHANNEL IN USE
FDVI: HRRZ F,USRJDA##(P1) ;GET NEXT DEVICE
HRRZ T1,JOBFDV(R) ;GET DEV TO RELEASE
CAIE F,(T1) ;IS THIS WHAT WE WANT TO CLOSE?
JRST FDV3 ;NO, CONTINUE
IFN FTVM,<
PUSHJ P,WAIT1## ;WAIT FOR INACTIVE DEVICE
>
MOVSI T2,DVTTY ;SET UP TTY BIT
IFN FTVM,<
SKIPN .UPMP+.UPVRT ;IF VIRTUAL JOB
>
TDNE T2,DEVMOD(F) ;OR IF I/O TO A TTY
SETZM DEVBUF(F) ;THEN FORGET BUFFERS
IFN FTVM,<
SKIPN .UPMP+.UPVRT ;IF VIRTUAL JOB
JRST FDV2 ;NOT THE CASE
MOVSI T3,R ;SET UP
PUSHJ P,RTIEVM## ;TELL MONITOR ABOUT BUFFERS
PUSHJ P,RTOEVM##
FDV2:>
MOVSI M,(CLOSE) ;ASSUME CLOSE
SKIPL JOBFDV(R) ;RIGHT?
MOVSI M,(RELEAS) ;NO, FIN COMMAND
DPB P1,PUUOAC## ;KPUT CHANNEL IN AC FIELD
XCT M
FDV3: SOJGE P1,FDVI
MOVE J,JOB## ;GET JOB NUMBER
SKIPL F,JOBFDV##(R) ;RESET F, SKIP IF NOT FIN
PUSHJ P,DEASG ;DEASSIGN DEVICE IF FIN
POPJ P, ;IGNORE IF NOT ASSIGNED BY CONSOLE
POPJ P,
> ;END CONDITIONAL ON FTFINISH!<FTDISK+1>
IFN FTFINISH,<
;HERE TO FIN ALL DEVICES JOB OWNS
FINALL: PJSP T2,MSTART## ;SETUP MONITOR JOB, RETURN AT UUO LEVEL
JSP T1,MONSTR## ;SETUP R, R,P
HLRZ F,DEVLST## ;START OF DDB CHAIN
FINAL1: LDB T1,PJOBN## ;JOB WHICH OWNS DEVICE
HRRM F,JOBFDV##(R) ;SAVE DDB ADDR IN CASE CFIN IS CALLED
CAMN T1,JOB## ;THIS JOB OWN DEVICE?
PUSHJ P,CFIN ;YES, FIN (OR CLOSE) IT
HLRZ F,DEVSER(F) ;SKIP TO NEXT DDB IN CHAIN
JUMPN F,FINAL1 ;TEST IT IF NON-0
> ;END CONDITIONAL ON FTFINISH
IFN FTFINISH!<FTDISK+1>,<
CFINIX: PUSHJ P,TTYFNU## ;DONE. FIND TTY LINE FOR JOB
PJRST HOLD## ;STOP JOB
>
IFN FTTIME, <
;"RESOURCES" - PRINT OUT AVAILABLE DEVICES AND FREE BLOCKS ON THE DISK
FREDEV:
PUSHJ P,SAVE2## ;SAVE P1=P2
IFN FTDISK, <
PUSHJ P,DSKRES## ;PRINT DISK INFO
>
HLRZ P1,DEVLST## ;GET DDB POINTER
MOVEI P2,0 ;SET DEVICE NAME 0 FOR FIRST COMPARE
LOP01: MOVE T1,DEVMOD(P1) ;DEVICE CHARACTERISTICS
TRNN T1,ASSCON!ASSPRG ;DEVICE ASSIGNED BY CONSOLE OR PROGRAM?
TLNE T1,DVTTY!DVDSK ;NO, IS IT A TTY OR DSK?
JRST LOP02 ;YES DO NOT PRINT
HLRZ T1,DEVNAM(P1) ;GET NAME OF NEXT DEVICE IN CHAIN
SKIPE DEVNAM(P1) ;DON'T PRINT COMMA IF NO NAME
CAIN T1,(SIXBIT /PTY/) ;A PSEUDO TELETYPE?
JRST LOP02 ;YES. DONT MENTION IT.
JUMPE P2,LOP01B ;SUPPRESS LEADING COMMA
PUSHJ P,PRCOM ;PRINT COMMA
LOP01B: MOVS P3,DEVNAM(P1) ;GET DEVICE NAME
HLLZ T2,P3 ;ASSUME SAME TYPE AS LAST ONE, PRINT
; ONLY RH OF NAME (UNIT NUMBER)
CAIN P2,0(P3) ;IS IT REALLY THE SAME?
JRST LOP01A ;YES. PRINT THE UNIT NUMBER.
MOVS T2,P3 ;NO. MUST PRINT WHOLE NAME,
HRRZ P2,P3 ; AND GET THE NEW DEVICE IN FLAG AC.
LOP01A: PUSHJ P,PRNAME## ;AS BEING FREE
LOP02: HLRZ P1,DEVSER(P1) ;GET NEXT DEVICE IN CHAIN
JUMPN P1,LOP01 ;IS THERE ONE?
JRST CRLF ;NO. DONE. PRINT CR, LF AND THEN POPJ
>
SUBTTL SUBROUTINES -- COMMAND SETUP
;ROUTINE TO CHECK FOR ACTIVE DEVICES
;NEVER GET HERE DURING SWAP IN OR OUT
;SINCE COMMAND TABLE SHOULD HAVE NOTRAN BIT ON
RUNCHK: IFE FTDISK,<
CAMN J,STUSER## ;SYSTEM TAPE USER?
JRST DLYCM1 ;YES. DELAY,BUT DO NOT STOP JOB
>
ACTCHK: JUMPE R,ACTCH1 ;DOES JOB HAVE CORE IN MEMORY?
IFN FTMS&FTKL10,<
PUSHJ P,CKCP1C## ;MAKE SURE CPU1'S CACHE HAS BEEN
; SGPET FOR THIS JOB
>
PUSHJ P,ANYACT## ;YES, ARE DEVICES ACTIVE?
JRST DLYCM ;YES, DELAY COMMAND.
ACTCH1: HRRZ F,LDBDDB##(U) ;RESTORE F
POPJ P,
;ROUTINE TO DELAY A COMMAND
;DELAYS COMMAND TO BE EXECUTED WHEN JOB IN CORE MEMORY
;AND CAUSES JOB TO BE SWAPPED IN(COMMAND WAIT BIT IS SET IN JBTSTS)
;AND POPS LEVEL UP ONE.
DLYCM:: PUSHJ P,DLYCOM## ;SET COMMAND WAIT BIT IN JOB STATUS AND PUT
; JOB IN COMMAND WAIT QUEUE
; SO JOB IS NOT RUNNABLE ANY MORE
;ROUTINE TO DELAY A COMMAND IF A SWAP OUT OR IN IS IN PROGRESS
;DIFFERS FROM DLYCM IN THAT JOB IS NOT MADE TO BE SWAPPED IN
;REQUIRED FOR DELAYING COMMAND IF SYSTEM
;TAPE USER TYPES ^C (HALT COMMAND)
DLYCM1: POP P,T1
IFN FTRSP,< TLNE M,TTYRNC!TTYRNU ;WILL THIS COMMAND CAUSE JOB TO BE RUN?
PUSHJ P,SETRSP## ; RESPONSE, IF NOT ALREADY SET
>
POP P,T2 ;TTY LINE #
AOS LINSAV## ;INCR. COMMAND POINTER SO NEXT CALL
; BY COMMAND DECODER CALL START SCANNING
; WITH LINE AFTER DELAYED COMMAND.
;THEN EXIT FROM COMMAND DECODER.
POPJ P,
SUBTTL SUBROUTINES -- GET A WORD
;ROUTINE TO RETURN NEXT ALPHANUMERIC STRING
; IN COMMAND LINE (SIXBIT)
;CALL: PUSHJ P, CTEXT
; SIXBIT STRING RETURN LEFT JUSTIFIED IN AC T2
CTEXT:: PUSHJ P,COMTYS ;SKIP CHAR
CTEXT1::PUSHJ P,SKIPS1 ;SKIP LEAD SPACES,TABS,NULLS AND CLEAR T2
POPJ P,0 ;NOTHING THERE.
PUSHJ P,SAVE1## ;SAVE P1
SKIPA P1,[POINT 6,T2]
CTEX0: PUSHJ P,COMTYS ;ROUTINE IN SCNSER TO PICK UP CHAR.
CTEX1: PUSHJ P, CTEX ;IS IT ALPHANUMERIC
POPJ P,0 ;NO
TRC T3,40 ;CONVERT TO SIXBIT
TLNE P1,770000 ;SIX CHARS YET?
IDPB T3,P1 ;NO. BUILD WORD
JRST CTEX0 ;LOOP FOR MORE
;SCAN FOR ALPHANUMERIC CHAR IN T3
CTEX: CAIL T3, "0"
CAILE T3, "Z" ;LETTERS ARE LARGER THAN NOS.
POPJ P,0 ;NEITHER
CAILE T3, "9"
CAIL T3, "A"
JRST CPOPJ1## ;LETTER OR NUMBER RETURN
POPJ P,0 ;NOT-LETTER/NUMBER RETURN
CTXDEV::PUSHJ P,CTEXT1 ;GET A WORD
CAIN T3,":" ;AND IF TERM IS A COLON,
PUSHJ P,COMTYS ;DISCARD IT
POPJ P,0 ;RETURN FROM CTXDEV
SUBTTL SUBROUTINES -- GET CHARACTER
;ROUTINE TO IGNORE LEADING SPACES, TABS,
;ALSO CLEARS T2
;CALL: PUSHJ P,SKIPS1 ;TO CONSIDER CURRENT CHARACTER
; PUSHJ P,SKIPS ;TO DISCARD CURRENT CHARACTER
;NON-SKIP RETURN MEANS END OF LINE
;SKIP RETURN MEANS SOMETHING THERE, IN T3 AND TTCMCH
;ROUTINE TO IGNORE LEADING SPACES AND TABS. ALSO, CLEARS T2
;FOR USE BY ANYRIN AND CTEXT
SKIPS:: PUSHJ P,COMTYS ;DISCARD CURRENT CHARACTER
SKIPS1::MOVEI T2,0 ;CLEAR ANSWER FOR NUMERIC AND TEXT INPUTS
MOVE T3,TTCMCH## ;GET CURRENT CHARACTER
CAIE T3,11 ;TAB?
CAIN T3,40 ;OR SPACE?
JRST SKIPS ;YES. DISCARD IT
CAIL T3,40 ;BREAK CHARACTER?
AOS 0(P) ;NO. SKIP RETURN
POPJ P,0 ;RETURN.
;COMTYS - ROUTINE TO READ COMMAND AND STOP ON COMMENT
;CALL: PUSHJ P,COMTYS
;RETURN WITH CHARACTER IN T3 (12 IF ; OR !)
COMTYS::PUSHJ P,COMTYI## ;GET CHARACTER
CAIL T3,"A"+40 ;LOWER CASE?
CAILE T3,"Z"+40
SKIPA
TRZ T3,40 ;YES, CONVERT TO UPPER CASE
CAIE T3,"!" ;SEE IF EXCLAMATION
CAIN T3,";" ;SEE IF SEMI-COLON
MOVEI T3,12 ;YES, CHANGE TO LINEFEED
MOVEM T3,TTCMCH## ;REMEMBER IN CASE DIFFERENT
POPJ P,
SUBTTL SUBROUTINES -- TYPE OUT ROUTINES
;ROUTINE TO APPEND A "?" TO INPUT STRING AND SET AS OUTPUT
;CALLED FROM OCTIN, RETURNS TO SECOND LEVEL ON PDL
;CALL: MOVE T1, BYTE POINTER TO LAST CHAR. IN INPUT STRING
; PUSHJ P, COMERA
COMERP::POP P,0(P) ;REMOVE SUB. RETURN BEFORE CALLING COMERA
COMERA::PUSHJ P,COMTYI## ;SKIP ONE MORE CHARACTER
;ROUTINE TO TYPE ALL OF A COMMAND ACCEPTED, FOLLOWED BY
;A QUESTION MARK
;CALL: PUSHJ P, COMERR
;COMMAND NOT IN COMMAND DIRECTORY
NOCOM:
COMERR::PUSH P,TTCMCA## ;SAVE ERROR POSITION IN SCAN ON STACK
PUSHJ P,TRESCN## ;BACK UP TO START OF COMMAND
PUSHJ P,PRQM ;TYPE ? FOR BATCH
COMERL: PUSHJ P,COMTYI## ;GET A CHAR FROM COMMAND
MOVE T1,TTCMCA## ;PASS BAD CHAR YET?
CAMN T1,0(P) ; ..
JRST COMER1 ;YES
PUSHJ P,USEARO## ;NO. TYPE CHAR, IN ARROW MODE
CAIE T3,12
JRST COMERL ;LOOP FOR MORE
COMER1: POP P,T1 ;REMOVE OLD POSITION FROM STACK
PUSHJ P,PRQM ;APPEND ? TO ERRONEOUS WORD
TLO M,ERRFLG ;SET ERROR FLAG
PJRST CRLF ;ADD CRLF
;ROUTINE TO PRINT ?DEVICE NAME
PRNAMQ: PUSHJ P,PRQM
TLO M,ERRFLG ;SET ERROR FLAG
PJRST PRNAME##
IFE FTCCLX&FTLOGIN,<
RECALL==COMERR
>
;ROUTINE TO PRINT A COMMAND ERROR MESSAGE
;SAME CALL AS CONMES
ERRMES::PUSHJ P,PRQM
ERRMSN: TLO M,ERRFLG ;INDICATE AN ERROR
TDZA J,J ;CLEAR JOB NUMBER TO INDICATE ERROR
; SKIP INTO CONMES ROUTINE
;ROUTINE TO PRINT CARRIAGE RETURN-LINE-FEED
;CALL: MOVE U,LDB ADDRESS OF TTY
; PUSHJ P,CRLF
PCRLF:: ; COMERR SKIPS TO HERE(SEE ABOVE)
CRLF:: MOVEI T1,[ASCIZ /
/]
;ROUTINE TO MOVE ASCIZ CHAR. STRING TO CONSOLE OUTPUT BUFFER
; CALL: MOVE U,LDB ADDRESS OF TTY
; MOVEI T1, ADDRESS OF ASCIZ MESSAGE
; PUSHJ P, CONMES
; STRING TERMINATED BY NULL
CONMES::HRLI T1,440700 ;FORM ASCIZ BYTE POINTER
PUSH P,T1 ;SAVE BYTE POINTER
CON0: ILDB T3,(P) ;GET NEXT CHAR.
JUMPE T3,TPOPJ## ;IS IT NULL?(IF YES, DO POP T1, POPJ)
PUSHJ P,COMTYO## ;NO, STORE TTY OUTPUT BUFFER
JRST CON0 ;KEEP GOING
;ROUTINE TO PRINT INLINE ASCIZ MESSAGE
;CALL: PUSHJ P,INLMES
; ASCIZ /THE MESSAGE/
;RETURN TO NEXT LOC AFTER MESSAGE
INLMES::POP P,T1 ;SETUP PRINT ADRESS FOR CONMES
PUSHJ P,CONMES
JRST 1(T1) ;RETURN TO NEXT LOC AFTER MESSAGE
;ROUTINE TO TYPE COMMA
;PRESERVES T1
PRCOM:: MOVEI T3,","
PJRST PRCHR
;ROUTINE TO APPEND ? TO ERROR MESSAGE
;CALL PUSHJ P,PRQM
; RETURN
PRQM:: MOVEI T3,"?"
PRCHR: PUSH P,T1
PUSHJ P,COMTYO##
PJRST TPOPJ##
;SUBROUTINE TO PRINT A SPACE
PRSPC:: PJSP T1,CONMES
ASCIZ / /
;SUBROUTINE TO PRINT A PLUS
PRTPLS::PJSP T1,CONMES
ASCIZ /+/
;ROUTINE TO PRINT "TOO FEW ARGUMENTS"
;CALL: MOVE U,BYTE POINTER
; PUSHJ P,NOTENF
NOTENP: POP P,(P) ;REMOVE SUBROUTINE CALL BEFORE CALLING NOTENF
NOTENF::JSP T1,ERRMES
ASCIZ /Too few arguments
/
;ROUTINE TO PRINT A PERIOD
;CALL: PUSHJ P,PRPER
PRPER:: JSP T1,CONMES
ASCIZ /./
;ROUTINE TO PRINT A SLASH
PRSLSH::JSP T1,CONMES
ASCIZ ./.
;ROUTINE TO RETURN HIGHEST RELATIVE ADDRESS SPECIFIED BY
; THE USER'S CORE ARGEMENT
;CALLING SEQUENCE:
; PUSHJ P,CORARG
; RETURN HERE IF NO ARGUMENT WAS SPECIFIED
; RETURN HERE - T1=HIGHEST RELATIVE ADDRESS REQUESTED
;NEVER RETURNS IF ARGUMENT IS ILLEGAL
CORARG::PUSHJ P,SKIPS1 ;SKIP LEADING BLANKS, ETC.
CORAR1: POPJ P,K2WLSH## ;NO ARGUMENT SPECIFIED
CAIE T3,"K" ;DON'T ALLOW "P" OR "K"
CAIN T3,"P" ; WITHOUT A PRECEEDING #
JRST COMERP ; SINCE AMBIGUOUS
PUSHJ P,DECIN1 ;GET THE ARGUMENT
POPJ P, ;NULL RETURN
JRST CORAR2 ;SEE IF "P" OR "K"
CAIE T3,"-" ;IF HYPHEN
CAIN T3,"(" ;OR L. PAREN.
MOVEI T3,0 ;SET E.O. LINE
CAILE T3,40 ;AN ARG. WAS TYPED, DELIMITER OKAY?
JRST COMERP ;BAD DELIMITER
LSH T2,K2WLSH
JRST CORAR3
CORAR2: CAIE T3,"K" ;CORE ARGUMENT IN # OF K?
CAIN T3,"P" ; OR NUMBER OR PAGES
SKIPA T1,CORAR1
JRST COMERP ;NO, DON'T ALLOW A,B,C, ETC.
CAIN T3,"P" ;DID USER TYPE "P"?
SOS T1 ;YES
LSH T2,(T1) ;CONVERT TO WORDS
PUSHJ P,COMTYS ;DISCARD "P"OR"K"
CORAR3: SOSL T1,T2 ;CONVERT TO HIGHEST RELATIVE ADDR.
JRST CPOPJ1## ;GIVE ARG FOUND RETURN
AOJA T1,CPOPJ1## ;MAKE ZERO BACK INTO ZERO
;SUBROUTINE TO PRINT "P" OR "K" AFTER A CORE TYPE OUT
;CALLING SEQUENCE:
; PUSHJ P,PRPORK
; ALWAYS RETURN HERE
PRPORK:
IFN FTKA10,<
MOVEI T3,"K" ;ASSUME "K"
>
IFN FTKI10!FTKL10,<
MOVEI T3,"P" ;KI10, TELL NUMBER OF PAGES
>
PJRST PRCHR ;PRINT "P" OR "K"
;ROUTINE TO DEASSIGN A DEVICE EXCEPT CONTROLLING TTY
;CALL: MOVE F, DEVICE DATA BLOCK
; MOVE J, JOB NUMBER
; PUSHJ P, DEASG
; ERROR NOT PREVIOUSLY ASSIGNED
; OK RETURN WITH DEVICE DEASSIGNED, EXCEPT CONTROLLING TELETYPE (LOGICAL NAME CLEARED)
DEASG: LDB T1,PJOBN## ;WAS DEVICE ASSIGNED TO THIS JOB?
CAME T1,J
POPJ P, ;NO, RETURN
DEASG1::PUSH P,J ;SAVE JOB NUMBER
MOVSI T2,DVDIRI ;CLEAR DIRECTORY IN CORE BIT
ANDCAB T2,DEVMOD(F) ;SET DEVICE CHARACTERISTICS FOR TEST
; AND ASGHGH
SETZM DEVLOG(F) ;CLEAR LOGICAL NAME
TLNE T2,TTYATC
JRST IPOPJ1##
TRNE T2,ASSCON ;IS DEVICE ASSIGNED BY CONSOLE?
AOS -1(P) ;YES, DO OK RETURN
IFN FT2REL,<
PUSHJ P,ASGHGH## ;IF DTA OR MTA, CLEAR ANY HIGH SEGMENT NAMES
; FROM THIS DEVICE SO NO NEW SHARING
; DEVMOD SETUP IN T2 ON CALL
>
MOVE T2,DEVMOD(F) ;IF IT IS A TTY
IFE FTNUL,<
TLNN T2,DVTTY ;THAT MAY BE AN
JRST DEASG2 ;ORPHAN - NOT
>
IFN FTNUL,<
TLNE T2,DVTTY ;IF NOT A TTY,
PUSHJ P,NULTST## ; OR THE NUL DEVICE,
JRST DEASG2 ; DON'T CLEAR ASSPRG
>
TLNE T2,TTYATC ;CONTROLLING
JRST DEASG2 ;AND NOT
SKIPN DDBLDB(F) ;ATTACHED
SKIPA T2,[ASSCON!ASSPRG] ;THEN
;CLEAR INIT ALSO
DEASG2: MOVEI T2,ASSCON ;SETUP ASSIGNED BE CONSOLE BIT FOR RELEA6
PUSHJ P,RELEA6## ;CLEAR JOB NO. IN DDB IF DDB NOT NEEDED
PUSHJ P,TTYKLQ## ;BE SURE TO CLEAN UP ASSIGNED TTY'S
JRST IPOPJ## ;RESTORE JOB NUMBER AND RETURN
;DEASTY--ROUTINE TO DEASSIGN ALL DEVICES EXCEPT CONTROLLING (ATTACHED) TTY
;CALL: MOVE J, JOB NUMBER
; PUSHJ P, DEASTY
DEASTY: PUSH P,F ;SAVE TTY DDB ADDRESS
HLRZ F,DEVLST## ;SEARCH ALL DDB'S
DEA1: PUSHJ P,DEASG ;TRY TO DEASSIGN IT
JFCL ;IGNORE IF CAN'T
HLRZ F,DEVSER(F)
JUMPN F,DEA1
PJRST FPOPJ## ;RESTORE TTY DDB ADDRESS
;SUBROUTINE TO READ A DECIMAL NUMBER. THIS ROUTINE DIFFERS FROM
; DECIN IN THAT IF THERE IS NO NUMBER TO READ THE CURSOR
; IS NOT MOVED.
;CALL WITH:
; PUSHJ P,NUMARG
; RETURN HERE IF NO NUMBER (NOTHING CHANGED)
; RETURN HERE NUMBER IN T2
;
NUMARG: PUSH P,TTCMCA## ;SAVE POINTERS
PUSH P,TTCMCH## ; ..
PUSHJ P,DECIN1 ;READ THE NUMBER
JRST NUMAR1 ;NO ARGUMENT
JRST NUMAR1 ;ILLEGAL CHARACTER
NUMAR0: SUB P,[2,,2] ;REMOVE JUNK FROM STACK
JRST CPOPJ1## ;GOOD RETURN
NUMAR1: POP P,TTCMCH## ;RESTORE POINTERS
POP P,TTCMCA## ; ON ANY ERROR
POPJ P,0 ; AND GIVE FAIL RETURN
IFN FTVM!FTMONL!FTMOFFL!FTSET,<
;SUBROUTINE TO READ AN ARGUMENT, CALL FNDNAM
;IF NOT FOUND BY FNDNAM CURSOR IS NOT MOVED
;CALL WITH T1=AOBJN WORD FOR TABLE
;RETURNS SKIP IF FOUND BY FNDNAM, T1=INDEX
;RETURNS NON-SKIP IF NOT FOUND (NOTHING CHANGED)
TXTARG::PUSH P,TTCMCA## ;SAVE CURSOR LOC
PUSH P,TTCMCH##
PUSH P,T1 ;SAVE AOBJN WORD
PUSHJ P,CTEXT1 ;GET THE ARGUMENT
POP P,T1
JUMPE T2,NUMAR1
PUSHJ P,FNDNAM ;IN TABLE?
JRST NUMAR1 ;NO
JRST NUMAR0 ;YES, CLEAN UP STACK AND GIVE FOUND RETURN
> ;END FTVM
;ROUTINES TO READ NUMBERS FROM COMMAND STRING
;CALL: MOVE P1,DESIRED INPUT RADIX
; PUSHJ P, ANYRIN
; NO ARG. TYPED RETURN, T2=0
; ILLEGAL CHARACTER RETURN
; NORMAL EXIT ;AC T2 CONTAINS NUMBER
;SCAN STOPS ON FIRST CR,DASH,SPACE,OR TAB OR ILLEGAL CHAR.
;SKIPS LEADING SPACES AND TABS
DECIN:: PUSHJ P,COMTYS ;SKIP CHAR
DECIN1::PUSHJ P,SAVE2## ;PRESERVE P1
MOVEI P1,12 ;DECIMAL INPUT
JRST ANYRIN
OCTIN:: PUSHJ P,COMTYS ;SKIP CHAR
OCTIN1::PUSHJ P,SAVE2## ;PRESERVE P1 ;;WARNING -- SEE AOS -3(P) BELOW
MOVEI P1,10 ;OCTAL INPUT
ANYRIN: PUSHJ P,SKIPS1 ;SKIP LEADING SPACES, TABS, NULLS
POPJ P,0 ;NOTHING LEFT. RETURN.
MOVEI P2,0 ;CLEAR DECIMAL ACCUMULATOR
CAIE T3,"#" ;SEE IF OCTAL FOCED
JRST ANYRI1 ;NO--PROCEED
MOVEI P1,10 ;YES--SET OCTAL RADIX
TLO P1,400000
PUSHJ P,COMTYS ;GET NEXT CHARACTER
ANYRI1: PUSHJ P,ANYR2 ;SEE IF NULL FIELD
JRST .+2 ;NOT END, SEE IF DIGIT
POPJ P, ;END--RETURN NULL
OCT0: CAIL T3,"0" ;IS CHARACTER .GE. A ZERO?
CAIL T3,"0"(P1) ;AND WITHIN RADIX BOUNDS?
JRST [CAIL T3,"0" ;NO. NOT A LEGAL DIGIT
CAILE T3,"9"
JRST ANYR1
JUMPL P1,ANYR1
TLO P1,200000
JRST .+1]
JFCL 17,.+1
IMULI T2,(P1) ;YES. SCALE INPUT SO FAR
ADDI T2,-"0"(T3) ;AND ADD IN THIS DIGIT
IMULI P2,^D10 ;MULTIPLY DECIMAL INPUT
JOV ANYR1 ;ON OVERFLOW, FIVE ILLEGAL CHARACTER RET
ADDI P2,-"0"(T3) ;INCLUDE THIS DIGIT
PUSHJ P,COMTYS ;GET ANOTHER CHARACTER
CAIE T3,"." ;SEE IF FORCING DECIMAL
JRST OCT0 ;AND LOOP FOR MORE.
MOVE T2,P2 ;YES--GET DECIMAL VALUE
JUMPL P1,ANYR1
PUSHJ P,COMTYS ;GET SEPARATOR
TLZ P1,200000
ANYR1: AOS -3(P) ;POINT TO ILLEGAL CHARACTER RETURN
TLNE P1,200000
POPJ P,
CAILE T3,40 ;CHECK FOR LEGAL TERMINATORS
ANYR2: CAIN T3,"," ;USED IN VARIOUS ROUTINES
JRST CPOPJ1## ;OK
CAIE T3,"[" ;MORE
CAIN T3,"]" ; ..
JRST CPOPJ1## ;OK.
CAIE T3,"<" ;MORE
CAIN T3,">" ; ''
JRST CPOPJ1## ;OK.
CAIE T3,"(" ;L. PAREN?
CAIN T3,"-" ;HYPHEN?
JRST CPOPJ1## ;OK.
POPJ P,CPOPJ1## ;NO GOOD. GIVE "BAD CHARACTER RETURN"
IFN FTLOGIN,<
;GET PROJECT-PROGRAMMER NUMBERS
;CALL: MOVE T1,INPUT BYTE POINTER
; PUSHJ P,PJPGNO
;
;(T2)LH _ PROJECT NUMBER
;(T2)RH _ PROGRAMMER NUMBER
;(T2) = 0 IF NO [ ]'S TYPED
;THE TERMINAL ] IS OPTIONAL
PJPGNO: PUSH P,P1
MOVEI P1,0 ;PRESET A 0 JUST IN CASE
PUSHJ P,SKIPS1
JRST PP2 ;NOTHING ON LINE
CAIE T3,"[" ;IS IT A "[" ?
CAIN T3,"<" ;OR 2741 EQUIV.
SKIPA ;YES
JRST PP2 ;EXIT.......
PP1: PUSHJ P,OCTIN ;GET FIRST ARG.-PROJ. NO.
JRST [CAIN T3,"-" ;SEE IF [-]
JRST [PUSHJ P,COMTYS ;YES--SKIP -
JRST PP1A] ;THEN RETURN 0
HLRZ T2,JBTPPN(J) ;NO ARG, DEFAULT TO LOGGED IN
JRST .+2] ;AND CONTINUE
JRST PP3 ;ILLEGAL OCTAL CHARACTER GIVEN
TLZ T2,-1
JUMPE T2,PP3 ;BOMB IF 0
HRL P1,T2 ;ENTER
CAIE T3,","
JRST PP3 ;PPN MUST HAVE COMMA
PUSHJ P,OCTIN ;GET SECOND ARG.-PROG. NO.
JRST [HRRZ T2,JBTPPN(J) ;NO ARG, DEFAULT TO LOGGED IN
JRST .+2] ;AND CONTINUE
JRST PP3 ;
TLZ T2,-1
JUMPE T2,PP3 ;BOMB IF 0
HRR P1,T2 ;ENTER
PP1A: CAIE T3,">" ;IS 2741 ENDING?
CAIN T3,"]" ;IS USUAL ENDING A "]"?
PUSHJ P,COMTYS ;YES, SKIP IT SO FINAL ] IS OPTIONAL
JUMPL P1,PP3 ;BOMB USER IF INVALID
PP2: MOVE T2,P1 ;RESULT IN T2
POP P,P1
POPJ P, ;RETURN TO CALL
PP3: POP P,P1
PJRST COMERP ;LOSE
> ;END FTLOGIN CONDITIONAL
;ROUTINE TO PRINT TIME AS HOURS,MINUTES,SECONDS, AND HUNDRETHS (NO CRLF)
;FORMAT IS HHMM:SS.HH, MM:SS, OR SS.HH IF HH AND MM ARE 0
;CALL: MOVE T1,TIME IN JIFFIES(60THS,50THS OR MILLISECONDS)
; PUSHJ P,PRTIM
; ;CALL PRTIME (ABOVE) TO GET CRLF AFTER TIME
;SCALEING IS DONE USING THE FOLLOWING GLOBAL SYMBOLS DEFINED IN COMMON
;THUS ANY INSTALLATION MAY HAVE ANY RATE CLOCK
;JIFMIN=NO. OF JIFFIES(CLOCK TICKS) PER MINUTE
;JIFSEC=NO. OF JIFFIES PER SECOND
;JIFSC2=1/2*JIFSEC(USED FOR ROUNDING)
PRTIM:: CAMGE T1,TICMIN## ;IF LESS THAN A MINUTE
JRST PR1 ;IN USE DIFFERENT FORMAT
MOVE T2,TICSEC## ;ADD 1/2 TICKS/SEC FOR ROUNDING
LSH T2,-1
ADD T1,T2
IDIV T1,TICMIN## ;FORM MINUTES
PUSH P,T2 ;SAVE REMAINDER IN JIFFIES
IDIVI T1,^D60 ;HOURS, MINUTES IN T1,T2
JUMPE T1,PR0 ;SUPPRESS 0 HOURS
PUSHJ P,RADX10##
PR0: PUSHJ P,INLMES ;PRINT "HH:" OR "H:"
ASCIZ /:/
MOVE T1,T2 ;GET MINUTES
PUSHJ P,PRT2 ;PRINT "MM:"
PUSHJ P,INLMES
ASCIZ /:/
POP P,T1 ;RESTORE SECONDS (IN JIFFIES)
PJRST PR2 ;PRINT AND RETURN (NO CRLF)
PR1: IDIV T1,TICSEC## ;JIFFIES PER SECOND
PUSHJ P,RADX10## ;PRINT SECONDS
PUSHJ P,PRPER ;PRINT PERIOD
MOVE T1,T2 ;NO OF JIFFIES(HUNDRETHS)
IMULI T1,^D100 ;CONVERT TO HUNDRETHS
PR2: IDIV T1,TICSEC##
PRT2: MOVEI T3,"0"
PUSH P,T1 ;SAVE T1 OVER I/O
CAIGE T1,^D10
PUSHJ P,COMTYO## ;PUT LEADING 0 IF LESS THAN 10
POP P,T1 ;RESTORE T1
JRST RADX10## ;PRINT REST OF NUMBER
;ROUTINE TO PRINT SIZE OF LOGICAL SEGMENT (LOW OR HIGH)
;CALL: MOVE J, HIGH OR LOW SEG NUMBER
; PUSHJ P,PRT SEG
; RETURN
;CALLED AT CLOCK LEVEL FROM CORE (UUO ARG) COMMAND AND SEGCON
PRTSEG::PUSHJ P,SEGSIZ ;T2=SIZE OF HIGH OR LOW SEG
MOVE T1,T2 ;RADX10 WANT DEC. NO. IN T1
JRST RADX10## ;PRINT DECIMAL
;ROUTINE TO RETURN SIZE OF HIGH OR LOW SEG
;CALL: MOVE J,LOW OR HIGH SEG NUMBER
; PUSHJ P,SEGSIZ
; RETURN WITH SIZE IN K IN T2
SEGSIZ::
IFE FTVM,<
IFN FTSWAP,<
LDB T2,IMGIN## ;SIZE WHEN NEXT SWAPPED IN(IN K)
JUMPN T2,SEGSZ1 ;0 MEANS NOT SWAPPED OUT
>
HLRZ T2,JBTADR##(J) ;SIZE-1 LOW LOW OR HIGH SEG IN WORDS IN CORE
JUMPE T2,CPOPJ## ;IS IT IN CORE?
LSH T2,W2PLSH## ;YES, CONVERT TO #K-1
AOJA T2,SEGSZ1 ;ADD 1 AND RETURN NUMBER OF K
>
IFN FTVM,<
CAILE J,JOBMAX## ;LOW SEGMENT?
JRST SEGSZ0 ;NO, GET HI SEG SIZE
SKIPLE T2,JBTSGN##(J) ;IS THERE A REAL HI SEG?
TLNE T2,SHRSEG ;YES, IS IT NON-SHARABLE?
JRST SEGSZ0 ;NO
HLRZ T2,JBTSWP##(T2)
MOVNS T2 ;HI SEG SIZE
ADD T2,JBTSWP##(J) ;INCLUDED IN LOW SEG SIZE
ANDI T2,777 ;CLEAR JUNK
JRST SEGSZ2 ;ADD UPMP SIZE AND RETURN
SEGSZ0: LDB T2,IMGIN## ;SEGMENT SIZE
JUMPN T2,SEGSZ1 ;GO IF NON-ZERO
HLRZ T2,JBTSWP##(J) ;MAYBE A NON-SHARABLE HI SEG
JUMPE T2,CPOPJ## ;RETURN IF NO CORE
>
IFN FTKI10!FTKL10,<
SEGSZ1: CAIG J,JOBMAX## ;IS THIS A LOW SEGMENT?
SEGSZ2: ADDI T2,UPMPSZ## ;YES ACCOUNT FOR THE SIZE OF THE UPMP
POPJ P,
>
IFN FTKA10,<
SEGSZ1==CPOPJ##
>
;ROUTINE TO ASSIGN A MINIMAL CORE AREA(2000 WORDS)
;CALLED FROM CORE,KJOB, AND RUN COMMANDS
;THIS ROUTINE PRESERVES INPUT BYTE POINTER IN T1
;CALL: PUSHJ P,GETMIN
; RETURN R=0 IF UNSUCCESSFUL OR CORE ASSIGNED ON DISK
GETMIN::PUSH P,U ;SAVE TTY LDB ADDRESS
PUSH P,T2 ;SAVE DEVICE NAME(GET)
PUSH P,S ;SAVE DISPATCH ADDRESS(ANYACT USES S)
IFN FT2REL,<
PUSHJ P,KILHGH## ;KILL HIGH SEG
>
IFN FTKL10&FTMS,<
PUSHJ P,CLCSN## ;CLEAR SWEEP SERIAL NUMBER FOR JOB
; SO WE DON'T SWEEP FOR NOTHING
>;END IFN FTKL10&FTMS
MOVEI T1,PAGSIZ##-1 ;BASIC UNIT OF CORE MEMORY
PUSHJ P,CORE0## ;ASSIGN 2000 WORDS ON DISK OR MEMORY
JFCL ;IGNORE IF CANT(R=0)
POP P,S
POP P,T2 ;RESTORE PUSHED ACS
PJRST UPOPJ## ;RESTORE U AND RETURN
;FNDNAM--ROUTINE TO SEARCH FOR ABBREV. NAME IN TABLE
;CALL MOVE T1,AOBJN POINTER TO LIST OF NAMES
; MOVE T2,SIXBIT ABBREVIATION
; PUSHJ P,FNDNAM
;NON-SKIP IF UNKNOWN (T1=0) OR DUPLICATE (T1 .NE. 0)
;SKIP RETURN IF FOUND WITH T1=INDEX IN TABLE
FNDNAM::PUSHJ P,SAVE3## ;SAVE P1,P2
MOVN P1,T2 ;FIND THE RIGHTMOST
AND P1,T2 ;NON-ZERO BIT IN COMMAND
JFFO P1,.+1 ;AND ITS CARDINALITY
IDIVI P2,6 ;FIND W HERE IN SIXBIT BYTE THE BIT IS
LSH P1,-5(P3) ;RIGHT-JUSTIFY THE BIT WITHIN THE BYTE
SOJ P1, ;MAKE MASK OF TRAILING BLANKS
SETZB T4,P2 ;INITIALIZE MATCH POINTER AND COUNT
MOVE P3,T1 ;SAVE POINTER
FNDNM2: MOVE T3,(T1) ;GET NEXT CANDIDATE
XOR T3,T2 ;COMPARE
JUMPE T3,FNDNMW ;WIN
ANDCM T3,P1 ;MASK IT
JUMPN T3,FNDNM3 ;LOOSE
MOVE T4,T1 ;WIN--SAVE POINTER
ADDI P2,1 ;COUNT SUCCESS
FNDNM3: AOBJN T1,FNDNM2 ;LOOP FOR ALL ENTRIES
MOVE T1,T4 ;RESTORE POSSIBLE WINNER
SOJN P2,CPOPJ## ;JUMP IF UNSUCCESSFUL
FNDNMW: SUB T1,P3 ;COMPUTE INDEX
TLZ T1,-1 ;REMOVE JUNK
JRST CPOPJ1## ;SKIP RETURN
SUBTTL SAVGET -- PARAMETERS
;SAVGET LOWER CORE LOCATIONS USED FOR UUOS TO MONITOR
;USED IN SAVGET IN APRSER AND SAVGET IN SEGCON
;THESE LOCATIONS ARE DEFINED TO BE IN THE USERS UUO ACS
;FOR LOOKUP,ENTER UUOS:
XP SGANAM,0
;FILE NAME
XP SGAEXT,SGANAM+1
;FILE EXTENSION
XP SGADAT,SGANAM+2
;FILE CREATION DATE+TIME
XP SGALEN,SGANAM+3
;LH=-LENGTH,RH=FIRST LOC-1 DUMPED
; OR PROJECT-PROGRAMMER NUMBER(DISK)
XP SGAEND,SGALEN+1
;LAST WORD OF DUMP COMMAND LIST=0(SAVE AND GET)
XP SGAREN,SGAEND
; ALSO FIRST WORD FOR RENAME USED AS DELETE
XP SGAPPN,SGAREN+3
;FOURTH WORD-PLACE TO SAVE PROJECT-PROGRAMMER
; NUMBER USER TYPED
;FOR OPEN UUOS:
XP SGAMOD,10
;S MODE WORD FOR OPEN UUO
XP SGADEV,SGAMOD+1
;DEVICE NAME
XP SGAHED,SGAMOD+2
;INPUT-OUTPUT BUFFER HEADER ADDRESSES=0
;MISC. DATA LOCATIONS:
XP SGACOR,13
;AC FOR CORE UUO'S(HIGHEST USER LOC DESIRED)
XP SGADMP,14
;DUMP COMMAND IOWD
IFN FTEXE,<SGASAV==:SGADMP>
XP SGANEW,15
;NEW CORE ASSIGNMENT AS SPECIFIED BY THIRD ARG
XP SGAHGH,16
;LH=EXT TO USE FOR SAVING HIGH SEG
; RH=EXT TO DELETE(IE SHRHGH OR HGHSHR)
XP SGALOW,17
;LH=EXT WHICH USER TYPED FOR SAVE OR GET COMMAND
; OR .SAV IF HE DIDN'T TYPE AN ARG WITH LEADING PERIOD
; RH=0
SUBTTL SAVGET -- COMMAND SCAN
;ROUTINE TO SCAN COMMAND STRING ARGUMENTS FOR SAVE,GET,RUN AND R
;COMMANDS AND STORE THEM IN JOB DATA AREA WHICH MUST BE IN CORE
;WHEN SGSET IS CALLED FROM COMMAND DECODER
;CALL: MOVE T2,SIXBIT DEVICE NAME
; MOVE J,JOB #
; MOVE U,LDB ADDRESS
; MOVE S,ADR. OF MONITOR JOB(SAVJOB,GETJOB,RUNJOB)
; MOVE R, ADR. OF JOB AREA
; PUSHJ P,SGSET
SGSETD: HLLZ T2,SYSTAP## ;SET DEFAULT DEVICE OF DISK
SGSET:
IFN FTVM,<
MOVEM P1,.UPMP+.UPUAC+6
MOVEM P2,.UPMP+.UPUAC+4 ;SAVE COMMAND FOR GET
>
PUSHJ P,SETASA ;TURN ON THE EXEC MODE UUO FLAG
MOVEM T2,SGADEV(R) ;STORE DEFAULT DEVICE NAME
MOVEM P1,SGAMOD(R) ;SAVE PHYSICAL/LOGICAL BIT FOR LATER
PUSHJ P,CTEXT1 ;GET DEVICE OR NAME
CAIE T3,":" ;SEE IF DEVICE
JRST SGSETF ;NO--SET FILE NAME
MOVEM T2,SGADEV(R) ;YES--SAVE IT
PUSHJ P,CTEXT ;AND GET FILE NAME
SGSETF: SKIPN T2 ;SEE IF FILE TYPED IN
MOVE T2,JBTPRG##(J) ;NO--GET DEFAULT IF ANY
JUMPE T2,NOTENF ;THERE MUST BE A FILE NAME
MOVEM T2,SGANAM(R) ;STORE FILE NAME
MOVEM T2,JBTPRG##(J) ;SAVE FILE NAME FOR SYSTAT COMMAND
MOVEI T2,0 ;ASSUME USER DID NOT SPECIFY AN EXTENSION
; 0 WILL BE TURNED INTO SAV OR DMP
CAIN T3,"." ;IS AN EXTENSION SPECIFIED
PUSHJ P,CTEXT ;YES. GET EXTENSION
HLRZS T2 ;SEE IF THE USER
CAIE T2,(SIXBIT /SHR/) ;HAS SPECIFIED AN
CAIN T2,(SIXBIT /HGH/) ;IMPROPER LOW EXTENSION
MOVEI T2,0 ;YES--IGNORE IT
HRLZM T2,SGAEXT(R) ;STORE IT FOR LOOKUP
IFN FTEXE,<
MOVSI T1,(JS.EXE)
CAIN T2,(SIXBIT /SAV/)
ANDCAM T1,JBTST2##(J)
>
IFN FT2REL,<
; LOOKUP OR ENTER
PUSHJ P,SETEXT## ;SET HIGH EXTENSION(SGAHGH) TO .SHR IF SSAVE OR GET
; ,HGH IF SAVE(LH S=NSRBIT).
>
SETZM SGADAT(R) ;SET DATE(E+2) TO 0, SO MONITOR WILL USE TODAYS
IFN FTLOGIN,<
PUSHJ P,PJPGNO ;GET PROJ. PROG. NO.
MOVEM T2,SGAPPN(R) ;STORE 0 IF NO []'S TYPED BY USER
JUMPE T2,SGSET4 ;IF NO PPN, ALL IS OK
MOVSI T1,(SIXBIT /SYS/)
CAME T1,SGADEV(R) ;DID HE ASK FOR "SYS" BY MISTAKE?
JRST SGSET4 ;NO, ALL IS OK
PUSHJ P,DEVLG## ;IS "SYS" A LOGICAL NAME?
SKIPA ;NO, CHANGE IT TO "DSK"
JRST SGSET4 ;YES, NO CHANGES (HE KNOWS
; WHAT HE IS DOING)
MOVSI T1,(SIXBIT /DSK/)
MOVEM T1,SGADEV(R) ;HE TYPED .R FOO[N,N]
;SO CHANGE "SYS" TO "DSK"
SGSET4:
>
PUSHJ P,CORARG ;AMOUNT OF CORE (OPTIONAL THIRD ARG.)
JRST SGSET1 ;RETURN HERE IF NO ARG.
TLNE T2,-1 ;USER ARG EXCEED MAX. SIZE OF CORE?
JRST COMERR ;YES, PRINT COMMAND ERROR
SGSET1:
HRRZM T2,SGANEW(R) ;STORE FOR RUN AND SAVE
PUSHJ P,SKIPS1 ;SKIP TRIALING SPACES
JRST SGSET3 ;THAT'S ALL, SO OK
CAIE T3,"(" ;SEE IF USER ARGUMENTS
CAIN T3,"-" ;SEE IF USER ARGUMENT (OLD WAY)
SKIPA ;YES--OK TO FINISH UP
JRST COMERR ;NO--ERROR
SGSET3:
IFN FTVM,<
PUSHJ P,RMVPFH## ;DELETE PFH IF GOT IT FROM SYS
>
HRRZS T2,S ;SCHEDULE MONITOR JOB
; GUARRANTEE LH OF PC WORD IS 0, SINCE IT WILL
; BE ADDED TO STARTING ADDRESS(IF RUN COM)
IFN FTVM,<
SUBI S,SAVJOB
IFN FTEXE,<
PUSHJ P,CHKEXE ;IS THIS AN EXE SAVE?
JRST SGST1A ;YES, MAKE AN EXE FILE
;NO, FALL THRU TO REGULAR SAVES
> ;END OF IFN FTEXE
SKIPN .UPMP+.UPREL ;IF NON-CONTIGUOUS CORE IMAGE
SKIPE .UPMP+.UPVRT ;OR VIRTUAL (1+I SEA)
SGST1A: JUMPE S,SGSET2 ;GO ELSEWHERE IF SAVE
SGST1B:
IFN FTMS,< PUSHJ P,CLRJSP## ;CLEAR JBTSPS TO ENSURE MONITOR JOB RUNS ON MASTER
>
>
PJRST MSTART## ;START JOB WITH PC IN MONITOR MODE
IFN FTVM,<
SGSET2: HLRZ T1,JBTADR(J) ;GET HIGHEST ADDRESS IN LOW SEG
CAMGE T1,SGANEW(R) ;COMPARE WITH USER STORED CORE ARG
MOVE T1,SGANEW(R) ;USER'S WAS LARGER, USE IT
HRRM T1,JOBCOR##(R) ;AND SET UP JOBCOR.
IFN FTEXE,<
PUSHJ P,CHKEXE ;NSAVE OR NSSAVE?
JRST SGST1B ;YES, SAVE AN EXE FILE
> ;END OF IFN FTEXE
PUSHJ P,CLRASA
IFN FTDAEM,<
PJRST DAECOM ;YES, LET DAEMON DO THE SAVE
>
IFE FTDAEM,<
JRST COMERA ;LOSE SINCE MONITOR CAN'T DO IT ANYWAY
>
>
SUBTTL SAVGET -- RUN AND GETSEG UUO'S
;ROUTINE TO PICKUP ARGUMENTS FOR RUN AND GETSEG UUOS
;THIS ROUTINE DOES SAME THING AS SGSET, EXCEPT THAT ARGUMENTS ARE
;OBTAINED FROM USER UUO ARGUMENTS INSTEAD OF FROM CONSOLE COMMAND
;THE USERS ARG ARE MOVED TO USER ACS(SGA...), THEREBY CLOBBERING HIS ACS
;USER AC FIELD AND START PC OFFSET(RUN UUO) ARE SAVED ON PD LIST AT JOBPD3
;THEN LOWER CORE IS SET UP(SG2 CALLED) RESET IS NOT DONE (FOR GETSEGUUO)
;JBTPRG NOT SET FOR LOW SEG, SINCE GETSEGUUO SHOULD NOT
;CALL: MOVE T1,CONTENTS OF USER AC(ADR. OF 3 WORD ARG LIST)
; MOVE R,JOB RELOCATION
; PUSHJ P,GETARG
; RETURN
GETARG::HRR M,T1 ;MOVE ADR. OF ARG LIST TO UUO
EXCH T1,(P) ;AND PUT ON PD LIST
PUSH P,T1 ;MOVE RETURN PC UP ONE IN PD LIST
LDB T1,PUUOAC## ;USER AC FIELD IN RUN OR GETSEG UUO
HRRM T1,-1(P) ;SAVE IN CASE OF ERROR RETURN
PUSHJ P,GETWDU## ;GET FIRST ARG FROM USER AREA
MOVEM T1,SGADEV(R) ;STORE DEVICE NAME
PUSHJ P,GETWD1## ;GET NEXT ARG FROM USER AREA
MOVEM T1,SGANAM(R) ;STORE FILE NAME FOR LOOKUP (DO NOT STORE FOR LOWSEG)
PUSHJ P,GETWD1## ;GET THIRD ARG(EXTENSION WORD E+1)
MOVEM T1,SGAEXT(R) ;STORE EXTENSION AND RH FROM USER
HLRZ T2,T1 ;PUT ARG IN T2, SO SAME AS SGSET RETURN FROM CTEXT
CAIE T2,'SHR' ;SEE IF THE USER
CAIN T2,'HGH' ; GAVE A BAD EXT
MOVEI T2,0 ;YES--IGNORE IT
IFN FT2REL,<
PUSHJ P,SETEX1## ;SAVE EXT AGAIN IN SGALOW
; SETUP EXT FOR HIGH SEG(SGAHGH="SHR")
; SETUP EXTENSION FOR LOW SEG(SGALOW="SAV")
>
PUSHJ P,GETWD1## ;GET FOURTH ARG(DATE WORD)
MOVEM T1,SGADAT(R)
PUSHJ P,GETWD1## ;GET FIFTH USER ARG FROM USER AREA
MOVEM T1,SGAPPN(R) ;STORE PROJECT,PROGRAMMER NO. OR 0
PUSHJ P,GETWD1## ;SIXTH ARG FROM USER
HRRZM T1,SGANEW(R) ;STORE CORE ARG OR 0(HIGHEST LOC DESIRED)
; IGNORE LH
JRST SG2A ;GO SET UP LOWER CORE AND RETURN
; DO NOT DO A RESET
SUBTTL SAVGET -- SAVE A JOB
;THIS JOB SAVES A JOB AREA ON RETRIEVABLE STORAGE
;THIS JOB RUNS IN EXEC MODE AND CALLS IO ROUTINES USING REGULAR UUOS
;NO ATTEMPT IS MADE TO SAVE STATUS OF IO DEVICES, JOBPDP, OR AC'S
;IN FACT THE ONLY USEFUL THING WHICH MAY BE DONE WITH A JOB AREA
;AFTER IT HAS BEEN SAVED IS TO START EXECUTION OVER AT THE STARTING
;ADDRESS
SAVJOB::JSP T2,SG1 ;SET UP ACS R,P,J, RESET DEVICES
PUSHJ P,CLRTAB ;CLEAR BITS AND TABLES
PUSH P,[0] ;STORE ZERO IN JOBPD1
; SO THAT SGRELE CAN
; TELL SAVE IS IN PROGRESS
IFN FT2REL,< PUSHJ P,ADJCOR## ;COMPUTE AMOUNT OF CORE FOR BOTH LO+HI SEGS
; FROM USER'S CORE ARG(IF ANY)
>
HLRE T2,SGADMP(R) ;-NO. OF WORDS TO WRITE
PUSHJ P,CKIOWD ;CHECK USER'S CORE ARG(IF ANY) WITH AMOUNT TO WRITE
; RETURN ONLY IF 0 OR NOT SMALLER
HRRM T1,JOBCOR##(R) ;STORE MAX OF SIZE OF FILE OR CORE ARG
; FOR ASSIGNING INITIAL CORE WHEN FILE GOTTEN
SETOM JOBSV##(R) ;FLAG LOW SEGMENT AS NOT COMPRESSED SO
; WILL NOT TRY TO EXPAND IT IF I/O DOES NOT
; GO TO COMPLETION
PUSHJ P,SGOPEN## ;OPEN THE DEVICE
IFN FTEXE,<
MOVE T1,DEVMOD(F) ;DEVICE BITS
MOVSI T2,(JS.EXE) ;BIT WHICH SAYS SAVE IN EXE FORMAT
IFN FTVM,<
TLNE T1,DVMTA ;A MAGTAPE
SKIPN .UPMP+.UPREL ; AND VIRTUAL ?
>
TLNE T1,DVDTA ; OR A DECTAPE ?
ANDCAM T2,JBTST2##(J) ;YES, SAVE IN THE OLD OFRMAT
PUSHJ P,CHKEXE ;EXE FILE SAVE?
JRST SAVEXE ;YES, GO TO SPECIAL CODE
> ;END OF IFN FTEXE
IFN FT2REL,<
PUSHJ P,SAVHGH## ;INIT DEV,SAVE HIGH SEG, IF ANY, RETURN IF OK
JRST SAVFIN ;HIGH SAVED, BUT NO DATA IN LOW SEG, SO DO
; NOT WRITE LOW FILE
; SKIP RETURN IF LOW SEG TO BE WRITTEN
>
; SGALEN, AND SGAEXT RESTORED
IFE FT2REL,<
PUSHJ P,SG3 ;RESTORE SGALEN
>
OPEN 0,SGAMOD ;RE INIT DEVICE, SO UGETF WILL SET FIRST FREE
; BLOCK BECAUSE NO LOOKUP OR ENTER DONE
JRST SGERRA ;DEVICE NOT AVAILABLE
SETZM SGADAT(R) ;CLEAR DATE, SO GET TODAY FOR CREATION
UGETF 0,SGAHED ;TELL DECTAPE SERVICE TO START AT FRONT
MOVEI T1,-2 ;FLAG THAT CORE HAS BEEN COMPRESSED
HRLM T1,USRHCU## ;KEEP LH NEG. COMMAND DECODER WILL EXPAND
; CORE ON START ,DDT,SAVE, REENTER,SSAVE IN CASE
; THIS SAVE IO DOES NOT GO TO COMPLETION. (CONTROL C
; OR DEVICE FULL, SO THAT CORE DOES NOT GET EXPANDED)
ENTER 0,SGANAM ;ENTER FILE NAME IN DIRECTORY
JRST SAVERR ;DIRECTORY FULL OR PROTECTION FAILURE
MOVE T1,JOB41##(R) ;SAVE USER UUO HANDLING JSR
MOVEM T1,JOBS41##(R) ;IN UPPER PART OF JOB DATA AREA
IFN FTEXAMINE,<
SETZM JOBEXM##(R) ;CLEAR MEMORY OF EXAMINE
>
SETZM JOBFDV##(R) ;CLEAR MEMORY OF FIN
MOVE T1,JOBDDT##(R) ;SAVE DDT STARTING ADDRESS HIGHER UP IN JOB DATA AREA
MOVEM T1,JOBSDD##(R) ;SO COMPRESS ALWAYS MOVES CODE DOWN
HRRZ T3,JOBSA##(R) ;SAV START ADDRESS FOR 10DMP
MOVEI T1,JOBSV## ;POINT TO 1ST DATA WORD
MOVEI T2,JOBSDD## ;IT STARTS AT JOBSDD
IFN FTKA10,<
HRLI T2,R ;RELOCATE IF PDP-6, KA-10
>
TLNE T2,R
ADDI T1,(R) ;RELOCATE IF KA
HLRE J,SGADMP(R) ;IOWD FOR THIS SIZE CORE(-LENGTH TO WRITE)
MOVNS J ;POSITIVE LENGTH
ADDI J,JOBSVM## ;ADD IN FIRST LOC-1 TO WRITE=HIGHEST LOC TO WRITE
; TO MAKE END TEST
HLL J,T2 ;USE R FOR RELOCATION IF KA
CMPLP1: MOVEM T1,U ;SAVE 1ST LOC FOR IOWD
CAMLE T2,J ;SEARCH FOR 1ST NON-0 WORD
AOJA T1,CMPTHR ;THROUGH
EXCTUX <SKIPN @T2> ;THIS A DATA WORD?
AOJA T2,.-3 ;NO. KEEP LOOKING
MOVNI P1,1 ;YES. P1 WILL BE AN IOWD
HRLI P1,-1(T2) ;1ST LOCATION - 1
CMPLP2: EXCTUU <PUSH T1,@T2> ;SAVE A DATA WORD
AOS T2
CAMGE T2,J ;AT TOP?
EXCTUX <SKIPN @T2> ;NO. NEXT WORD NON-0?
JRST .+2 ;NO. THROUGH THIS BLOCK
SOJA P1,CMPLP2 ;COUNT THE WORD AND CHECK NEXT
EXCTUU <MOVSM P1,(U)> ;SAVE IOWD IN FRONT OF BLOCK
AOJA T1,CMPLP1 ;LOOK FOR NEXT NON-0 BLOCK
;HERE WHEN THE CORE IMAGE IS ZERO COMPRESSED
CMPTHR: HRLI T3,254000 ;SET A JRST C(JOBSA)
EXCTXU <MOVEM T3,-1(T1)> ;AT END OF FILE
SUBI T1,JOBSV## ;COMPUTE WORD COUNT
TLNE T2,R
SUBI T1,(R) ;REMOVE RELOCATION IF KA
MOVNS T1 ;MAKE AN IOWD
HRL T1,SGADMP(R) ;START ADDRESS
MOVSM T1,SGALEN(R) ;IOWD FOR THE OUTPUT UUO
; ENTER USES NEGATIVE USRCHU TO SET RIBVER
PUSHJ P,SGDOA ;DO OUTPUT,RELEASE,FIND TTY
OUTPUT 0,SGALEN ;OUTPUT UUO EXECUTED BY SGDO
; RETURN HERE ONLY IF NO ERRORS
SAVFIN:
IFN FTEXE,<
MOVE J,JOB## ;GET JOB NUMBER
MOVSI T1,(JS.EXE) ;GET EXE FILE STATUS BIT
ANDCAM T1,JBTST2##(J) ;CLEAR BIT IN JOB STATUS WORD
>
PUSHJ P,SGREL ;RELEASE DEVICE AND FIND TTY
MOVE T2,JBTNAM##(J) ;GET JOB NAME
PUSHJ P,PRNAME## ;PRINT IT
JSP T1,PHOLD## ;PRINT MESSAGE AND STOP JOB
ASCIZ / saved/
SAVERR::
IFN FTEXE,<
MOVE J,JOB## ;GET JOB NUMBER
MOVSI T1,(JS.EXE) ;GET EXE FILE STATUS BIT
ANDCAM T1,JBTST2##(J) ;CLEAR BIT IN JOB STATUS WORD
>
HRRZS USRHCU## ;CLEAR SAVE IN PROGRESS FLAG
HRRZS JOBHCU##(R) ; AND THE JOB DATA AREA
MOVEI T1,PRTERR ;ERROR CODE IN CASE RUN UUO(PROTECTION ERROR)
PUSHJ P,SGRELL ;CHANGE TO DISK ENTER ERROR CODE IF DSK
; RELEASE DEVICE AND RETURN TO USER(IF RUN UUO)
; OR FIND TTY+PRINT ?CRLF
PJSP T1,LKENFL ;PRINT MESSAGE AND STOP JOB
ASCIZ /Enter error /
SUBTTL SAVGET -- "EXE" SAVE FILES
IFN FTEXE,<
;THIS ROUTINE DOES A "SAVE" FOR USERS RUNNING
; UNDER A VIRTUAL MEMORY SYSTEM. THE SAVE FILE IS IN THE NEW FORMAT
; (I.E. A VARIABLE-LENGTH DIRECTORY AND A VARIABLE NUMBER OF
; FILE PAGES FOLLOWING IT).
;FLAG BITS USED IN THE LEFT HALF OF P1
SV%SAV==NSRBIT ;USER ISSUED AN "SAVE" COMMAND
;SV%SHR==(1B1) ;THIS BIT MEANS WE SAW A SHARABLE HIGH SEG.
;IT IS DEFINED IN S AND MUST NOT CHANGE
SV%FUL==(1B2) ;USER HAD MAX ALLOWABLE CORE, PAGE WAS WRITTEN OUT
SV%PGO==(1B3) ;PHYSICAL LIMIT REACHED, PAGE WAS PAGED OUT
SV%DWO==:(1B4) ;DON'T WRITE OUT DIRECTORY (USED FOR 1ST PASS THRU DIR)
GT%DAF==:(1B5) ;DIRECTORY ALREADY FLUSHED (OCCURS IF
; THE LAST PAGE TO BE READ IN OVERWRITES THE
; DIRECTORY PAGE.)
GT%PLE==:(1B6) ;PHYSICAL LIMIT WAS EXCEEDED ON A GET
GTHGH==:(1B7) ;GET HIGH SEGMENT (PARAMETER TO GETNEW)
GTLOW==:(1B8) ;GET LOW SEGMENT (PARAMETER TO GETNEW)
GTBTH==:GTHGH+GTLOW ;GET BOTH HIGH AND LOW SEGMENTS
GT%GTH==:(1B9) ;A HIGH SEGMENT WAS FOUND AND READ IN (FOR VEST.
; JOB DATA AREA SET-UP)
GT%S1S==:(1B10) ;SAW A SHARABLE PAGE IN THE COURSE OF THIS GET
GT%DW1==:GT%S1S+SV%DWO+GT%GTH ;THESE BITS ARE CLEARED WHEN ROTATING DIRECTORIES
;IN SAVEXE, P1-P4 ARE USED FOR SCRATCH AC'S. THEIR CONTENTS ARE:
;
;P1 - LH=FLAGS
; RH=MOVING POINTER TO DIRECTORY PAGE
;
;P2 - LH=COUNTER OF # OF DIRECTORY PAGES
; RH=CURRENT FILE PAGE # FOR DIRECTORY ENTRY
;
;P3 - USED TO HOLD CURRENT PAGE #'S WHEN PASSING OVER THE PAGE MAP
;
;P4 - LH=ACCESS BITS OF THE PAGE (IF ANY) WHICH HAD
; TO BE WRITTEN OUT TO THE DISK TO MAKE ROOM FOR
; THE DIRECTORY PAGE. THESE BITS ARE SAVED BECAUSE
; THEY ARE NEEDED FOR THE DIRECTORY, BUT AT THAT TIME,
; THE PAGE WHICH THEY REPRESENT IS WRITTEN OUT
; AND CAN'T BE BROUGHT BACK IN UNTIL THE DIRECTORY IS
; RELEASED.
; RH = DISK ADDRESS OF PAGE WHICH WAS WRITTEN OUT, OR
; THE PAGE NUMBER OF A PAGE WHICH HAD TO BE PAGED OUT
; BECAUSE THE CREATION OF THE DIRECTORY CAUSED THE USER'S
; PHYSICAL LIMIT TO BE EXCEEDED.
;
;P4 (NON-VM ONLY) - SCRATCH AC
;
;
REPEAT 0,<
***** EXPLANATION OF THE NSAVE PROCESSING *****
The NSAVE processing is fairly straightforward with a couple
of exceptions. First, a free page is acquired and the
directory is created in it. Next, the directory is written
out and its core is released. Finally, the core image is
written out, one page at a time for the low seg, and in one
fell swoop for the high seg.
The only minor problem involved in the use of the directory
is that before the 1st entry is created, the length of the
entire directory must be known (in order to set the file
page # field). This is accomplished by creating the
directory as if it were one page long, but not actually
writing it out as it is being created. The end result of
this operation is a valid directory if it is one page long,
or the last page of the directory if it is more than one
page long. In the latter case, the current file page number
is adjusted to be one more than the length of the directory,
and the whole process is repeated with each directory page
being written out as it is created. This technique
penalizes only those wierdos with extremely long
directories.
Another problem occurs in VM systems when the user's core
image is sufficiently large that there are no available
pages to use as a directory. In this case a random page is
written to disk and deleted from the page map. The disk
address of the page is saved so the page can be read back in
later. Also, the directory access bits for the page are
computed and stored before the page is written out so that
it won't have to be read back in at the point when its
directory entry is being created.
The last problem in VM systems occurs when the user's
physical core limit will not allow the directory page to be
actually created. In such a case, a random page is
paged-out (as distinguished from the previous case) and the
directory is then created. If the second attempt to create
the directory page fails, a STOPCD results. This page is
then later paged back in so that user's may not go "virtual"
inadvertantly.
For all systems, zeroes are compressed on a page-by-page
basis. However, on non-VM systems, if the user's core image
is equal to CORMAX, (i.e. there is no place to put a
directory), then the directory is created in the user's AC's
and zero-compression is not done. This implies that under
certain extreme conditions, an EXE file may vary greatly in
size depending upon the value of CORMAX.
>;END OF REPEAT 0
;
;COME HERE TO BEGIN THE SAVE OF A VM SYSTEM CORE IMAGE..
;WE MUST FIRST INIT THE DEVICE AND ENTER THE
; .EXE FILE IN THE USER'S DIRECTORY
;
SAVEXE: SKIPN T1,SGALOW(R) ;GET USER EXTENSION, IF ANY
MOVSI T1,'EXE' ;SET UP EXTENSION OF "EXE"
MOVEM T1,SGAEXT(R) ;STORE IN USER'S AREA
HRROS USRHCU## ;SET SAVE IN PROGRESS FLAG IN MONITOR
HRROS JOBHCU##(R) ; AND IN USER JOB DATA AREA
ENTER 0,SGANAM ;ENTER THE FILE-NAME IN THE DIRECTORY
JRST SAVERR ;ERROR, ABORT WITH ERROR MESSAGE
MOVEI P1,0 ;SET UP TO GET FLAGS
HLRZ T1,SGAHGH(R) ;GET EXTENSION SET UP BY SG3
CAIE T1,'SHR' ;WAS THIS A NSSAVE?
TLO P1,SV%SAV ;NO, SET NON-SHARABLE BIT
PUSHJ P,COPVJD## ;COPY NUMBERS FROM JOBDAT TO VESTIGUAL JOBDAT
; (ONLY NECESSARY FOR GETSEG OF UNKNOWN SEGMENTS)
;FALL THRU TO NEXT PAGE.....
;STILL IN IFN FTEXE CONDITIONAL
IFN FTVM,<
;WE MUST NOW SEARCH THRU THE USER'S PAGE MAP TO FIND A FREE
; PAGE THAT WE CAN USE AS THE DIRECTORY PAGE. IF WE FIND
; ONE, THEN THERE'S NO PROBLEM. HOWEVER, IF THE USER'S MAP
; IS FULL, WE MUST TEMPORARILY WRITE ONE OF THE USER'S
; PAGES OUT TO SECONDARY STORAGE AND USE THAT PAGE AS THE
; SCRATCH PAGE. EVEN IF WE FIND A FREE PAGE, WE MAY EXCEED
; THE USER'S PHYSICAL LIMIT BY ATTEMPTING TO CREATE IT, SO WE
; MAY HAVE TO PAGE OUT SOME OTHER PAGE IN ORDER TO CREATE
; THE DIRECTORY PAGE.
SKIPN VIRTAL## ;MUST BE ENOUGH VIRTUAL CORE TO CREATE 1 PAGE
JRST NEED1P## ;GIVE UP NOW
PUSHJ P,GTFREP ;TRY TO FIND A FREE PAGE
SKIPA P3,[XWD 0,PAGSIZ##-1] ;COULDN'T, START AT PAGE 777
JRST [MOVE P3,T1 ;GOT ONE, PUT ITS NUMBER IN P3
JRST PAGFRE]
; NOW FIND ONE TO OUTPUT TEMPORARILY
MOVE J,JOB## ;SET UP JOB NUMBER
SAV2: MOVE T1,P3 ;GET THE PAGE #
PUSHJ P,TPAHS## ;TEST FOR SHARABLE HISEG
SOJA P3,SAV2 ;CAN'T USE THIS ONE, TRY NEXT LOWER PAGE
; WE MUST FIND A PAGE THAT ISN'T IN THE
; SHARABLE HI SEG SO EVENTUALLY, WE
; WILL SKIP
JUMPE P3,NEED1P## ;IF IT'S PAGE 0, WE LOSE
PUSHJ P,CMPBIT ;COMPUTE THE SAVE-FILE BITS FOR THIS PAGE
JRST BRCSTP ;ISSUE FATAL STOPCD IF NON-EXISTENT
TLNE T1,SV%ABZ ;DON'T REMOVE AN ABZ PAGE
SOJA P3,SAV2 ;DECREMENT PAGE #
HLLZ P4,T1 ;SAVE THESE BITS FOR LATER
HRRZ T1,P3 ;GET THE PAGE #
PUSHJ P,IPCRMV## ;REMOVE PAGE FROM LOG. ADR. SPACE
JRST SVABRT ;I/O ERROR
PUSHJ P,IPCPAG## ;WRITE PAGE OUT (RETURN WITH T2=PAGE #
; OR DISK ADDRESS)
JRST SVABRT ;ERROR
HRR P4,T2 ;SAVE ADDRESS WHERE WE PUT IT ON DISK
TLO P1,SV%FUL ;REMEMBER THAT WE DID THIS
;FALL INTO PAGFREE
>;END IFN FTVM
;STILL IN IFN FTEXE CONDITIONAL
IFN FTVM,<
;COME HERE WHEN WE HAVE FOUND A FREE PAGE TO USE AS THE DIRECTORY
PAGFRE: MOVE T1,CORMAX## ;GET MAX PHYSICAL LIMIT FOR SYSTEM
LSH T1,W2PLSH## ;MAKE CORMAX INTO PAGE NUMBER
HRLI T1,^D512 ;MAKE HIM HAVE A VERY HIGH VIRTUAL LIMIT
EXCH T1,.PDCVL##(W) ;REPLACE HIS NEW VIRTUAL LIMIT
PUSH P,T1 ;AND SAVE HIS OLD ONE
MOVEI T1,^D512-1
MOVE J,JOB## ;SET UP JOB
PUSH P,JBTLIM##(J)
DPB T1,JBYLCR##
PGFRE2: MOVE T1,P3 ;GET SAVED PAGE NUMBER
PUSHJ P,CRPAGE ;CREATE THE PAGE
SKIPA T1,[1] ;PHYS LIM EXCEEDED, START LOOKING
; FOR PAGE TO PAGE OUT AT PAGE 1.
JRST GOTDIR ;SUCCESS, WE HAVE OUR DIRECTORY
PGFRE3: PUSHJ P,PAGOUT ;TRY TO PAGE IT OUT
AOSA T1 ;BUMP PAGE #
JRST PGFRE4 ;OK
CAIE T1,PAGSIZ## ;THRU UPMP?
JRST PGFRE3 ;NO, KEEP GOING
STOPCD .,STOP,PGL,
;++PAGES GOT LOST
PGFRE4: TLOE P1,SV%PGO ;REMEMBER WE DID IT (DONE IT BEFORE?)
STOPCD .,STOP,PAO,
;++PAGE ALREADY OUT
HRR P4,T1 ;SAVE PAGE # THAT WAS SENT OUT
JRST PGFRE2 ;TRY TO CREATE DIRECTORY AGAIN
>;END IFN FTVM
IFE FTVM,<
;IF THIS IS A NON-VM SYSTEM, WE MUST ACQUIRE A FREE PAGE TO USE AS THE
; DIRECTORY. IF THE CORE UUO FAILS, THEN WE HAVE NO EXTRA PAGES TO USE
; AS THE DIRECTORY AND WE MUST USE THE USER'S SHADOW AC AREA. THIS ALSO
; IMPLIES THAT NO ZERO-COMPRESSION IS POSSIBLE BECAUSE THE DIRECTORY
; MUST BE KEPT SHORT (I.E. 6 WORDS). THEREFORE, THERE ARE SEVERAL
; CHECKS LATER ON TO SEE WHERE THE DIRECTORY WAS FORMED.
;THESE CHECKS ARE OF THE FORM "TRNN P1,PAGNUM" WHICH WILL SKIP IF THE
; DIRECTORY WAS CREATED ANYWHERE EXCEPT PAGE 0.
HRRZ T1,USRREL## ;GET TOP OF LOW SEGMENT
ADDI T1,EXESIZ ;BUMP IT BY LENGTH OF DIRECTORY
MOVEM T1,SGACOR(R) ;STORE FOR CORE UUO
PUSH P,P1 ;CORE UUO'S CLOBBER P1
CALLI SGACOR,200011 ;DO PHYSICAL-ONLY CORE UUO
TDZA P3,P3 ;COULDN'T GET EXTRA PAGE, SET DIRECTORY
; PAGE TO BE PAGE 0, AND DON'T ZER0-COMPRESS
HRRZ P3,USRREL## ;GET EXTRA PAGE, GET TOP OF LOW SEGMENT
LSH P3,WXPLSH ;=PAGE # OF DIRECTORY
POP P,P1 ;RESTORE P1
>;END IFE FTVM
;COME HERE WHEN WE HAVE CREATED THE DIRECTORY PAGE
IFN FTVM,<
GOTDIR: POP P,JBTLIM##(J)
POP P,.PDCVL##(W) ;RESTORE VIR,PHY LIMITS
>;END IFN FTVM
LSH P3,PXWLSH ;CONVERT TO ADDRESS
HRRI P1,1(P3) ;P1 POINTS TO 2ND WORD OF THE DIRECTORY
MOVEI P2,1 ;P2=DIR PAGE COUNT,,FILE PAGE #
TLO P1,SV%DWO ;DON'T ACTUALLY WRITE DIRECTORY, JUST COMPUTE IT
TDZA P3,P3 ;START LOOKING AT PAGE 0 FOR USER'S PAGES
GOTDR2: AOS P3 ;BUMP PAGE #
PUSHJ P,MKNTRY ;MAKE A DIRECTORY ENTRY FOR THIS PAGE
JRST THRUDR ;DIRECTORY IS OVER, GO CHECK ITS LENGTH
JRST GOTDR2 ;MORE TO GO, GET NEXT PAGE #
;STILL IN IFN FTEXE CONDITIONAL
;COME HERE WHEN THE DIRECTORY IS FINISHED
;IF THE DIRECTORY IS ONE PAGE LONG, THEN THE FULL DIRECTORY
; IS ALREADY SET UP AND READY TO BE OUTPUT. IF IT'S MORE THAN
; ONE PAGE LONG, ONLY THE LAST PAGE IS SET UP (WHICH OBVIOUSLY
; IS WORTHLESS NOW) AND NO PREVIOUS PAGES HAVE BEEN OUTPUT.
; IN THAT CASE, WE MUST GO THRU THE WHOLE PROCEDURE AGAIN,
; EXCEPT THIS TIME, WE WILL ACTUALLY WRITE OUT EACH PAGE
; AS WE GO.
THRUDR: MOVNI T1,EXESIZ
IFE FTVM,<
TRNE P1,PAGNUM ;DIRECTORY IN PAGE 0?
JRST .+4 ;NO
HRLM T1,SGAHGH(R) ;USE OTHER IOWD
SETZM SGALOW(R) ;CLEAR END
SKIPA
>
HRLM T1,SGALEN(R) ;SET UP LENGTH
MOVE T1,[SV.END,,LN.END] ;STORE END BLOCK
PUSHJ P,PTDIRW ;..
TLZ P1,SV%DWO ;CLEAR "DON'T WRITE OUT" FLAG
HRRZ T1,P1 ;GET DIRECTORY POINTER
ANDI T1,EXESIZ-1 ;FIND OFFSET INTO LAST PAGE
HLRZ T2,P2 ;GET # OF DIR PAGES-1
LSH T2,PXWLSH ;FIND LENGTH OF PREVIOUS PAGES
ADD T1,T2 ;=TOTAL LENGTH OF DIRECTORY
SUBI T1,LN.END ;SUBTRACT LENGTH OF END-BLOCK
;**NOTE**IF NEW BLOCKS ARE ADDED TO
; THE FILE DIRECTORY, THEIR LENGTHS
; SHOULD BE SUBTRACTED HERE
HRLI T1,SV.DIR ;SET UP 1ST WORD OF DIRECTORY
TRZ P1,EXESIZ-1 ;SET POINTER TO TOP OF DIR PAGE
PUSHJ P,PTDIRW ;STORE IT AND BUMP POINTER
TLNN P2,-1 ;WERE THERE MORE THAN 1 DIR PAGE?
JRST RELDIR ;NO (HOORAY!), WE CAN JUST OUTPUT PAGE
HLRS P2 ;YES, SET FILE PAGE # TO BE THE
; 1ST PAGE AFTER THE DIRECTORY PAGES
AOS P2 ;MAKE IT ONE MORE THAN LAST DIR PAGE
TDZA P3,P3 ;START OVER AGAIN AT PAGE 0
THRU2: AOS P3 ;BUMP PAGE #
PUSHJ P,MKNTRY ;FORM A DIRECTORY ENTRY
SKIPA T1,[SV.END,,LN.END] ;THRU, PUT OUT END BLOCK
JRST THRU2 ;LOOP UNTIL PAGE 777
PUSHJ P,PTDIRW ;STORE IN DIRECTORY
;FALL THRU TO NEXT PAGE...
;STILL IN IFN FTEXE
;WE HAVE NOW FINISHED CREATING THE DIRECTORY.
;WE MUST GET RID OF THE DIRECTORY PAGE, RESTORE ANY
; PAGES THAT HAD TO BE WRITTEN OUT EARLIER,
; AND CREATE THE REST OF THE FILE.
RELDIR: TRZE P1,EXESIZ-1 ;IS THERE A PARTIAL PAGE LEFT TO OUTPUT?
PUSHJ P,PUTDIR ;YES, SEND IT OUT
IFN FTVM,<
HRRZ T1,P1 ;GET PAGE ADDRESS OF DIRECTORY
PUSHJ P,ZAPPAG ;DESTROY IT
STOPCD CPOPJ,DEBUG,DPN, ;++DIRECTORY PAGE NON-EXISTENT
TLNE P1,SV%FUL ;DID WE WRITE OUT A PAGE?
PUSHJ P,GTSAVP ;YES, GET IT BACK AGAIN
TLNN P1,SV%PGO ;DID WE HAVE TO PAGE OUT A PAGE?
; (WAS PHYS LIMIT EXCEEDED?)
JRST RELDR1 ;NO
HRRZ T1,P4 ;YES, GET ITS PAGE #
PUSHJ P,PAGIN ;BRING IT IN
JRST SVABRT ;I/O ERROR--ABORT
>;END IFN FTVM
IFE FTVM,<
HRRZ T1,USRREL## ;GET TOP OF LOW SEGMENT
IFN FTKA10,<
SUBI T1,EXESIZ*2 ;ROUND DOWN TO 1K
>
IFN FTKI10,<
SUBI T1,EXESIZ ;GET RID OF DIRECTORY PAGE
>
TRNE P1,PAGNUM ;DID WE USE PAGE 0 AS THE DIRECTORY PAGE?
PUSHJ P,GETCOR ;NO, REDUCE CORE BY ONE PAGE
MOVNI T1,EXESIZ ;SIZE OF PAGE
HRLM T1,SGALEN(R) ;RESET LENGTH IN CASE WE
SETZM SGAEND(R) ; ARE USING PAGE 0 AS THE
; DIRECTORY, IN WHICH CASE SGALEN
; HAD PART OF THE DIRECTORY IN IT
>;END IFE FTVM
;THIS IS THE MAIN LOOP FOR AN EXE FILE SAVE
;EACH PAGE IS WRITTEN OUT INDIVIDUALLY TO INSURE DEVICE AND
; SYSTEM COMPATABILITY
RELDR1: SETO P3, ;WE WILL START LOOKING AT PAGE 0
SKIPLE J,JBTSGN##(J) ;IS THERE A HI SEG
PUSHJ P,SETHRL## ;YES, SET LH(JOBHRL)
MOVE J,JOB## ;RESET J
RELDR2: AOS T1,P3 ;BUMP PAGE #
CAIL T1,EXESIZ ;THRU UPMP?
EXEXIT: JRST [HRRZS USRHCU## ;YES, CLEAR SAVE IN PROGRESS FLAG
HRRZS JOBHCU##(R)
JRST SAVFIN] ; WE'RE FINALLY THRU!!!
IFN FTVM,<
PUSHJ P,CMPBIT ;COMPUTE DIRECTORY BITS
JRST RELDR2 ;NON-EXISTENT PAGE
TLNE T1,SV%ABZ ;ALLOCATED-BIT-ZERO?
JRST RELDR2 ;YES, DON'T SAVE IT
MOVE T1,P3 ;GET PAGE #
PUSHJ P,YANKIT ;BRING PAGE IN, IF IT'S OUT
JFCL ;SHOULDN'T BE ABZ
MOVE T1,P3 ;GET PAGE #
TLNN T2,(PA.AA) ;ACCESS ALLOWED?
PUSHJ P,SETAA ;NO, SET IT
>;END IFN FTVM
;FALL THRU TO NEXT PAGE....
IFE FTVM,<
PUSHJ P,CMPBIT ;COMPUTE ACCESS BITS FOR THIS PAGE
JRST RELDR2 ;PAGE IS NON-EXISTENT, DON'T SAVE IT
TLNE T1,SV%ABZ ;IS THE PAGE ALLOCATED-BUT-ZERO?
TRNN P1,PAGNUM ;YES, BUT ARE WE ZERO-COMPRESSING?
SKIPA ;NO TO EITHER
JRST RELDR2 ;YES, DON'T SAVE THIS PAGE
TLNN T1,SV%HIS ;IS THIS THE HIGH SEG?
JRST RELDR3 ;NO
MOVSI T1,(JS.EXE) ;EXE BIT MUST BE CLEARED ON
ANDCAM T1,JBTST2##(J) ; A HIGH SEGMENT SAVE
MOVNI T1,4 ;SET LEFT HALF OF THESE LOCS
HRLM T1,USRHCU## ; TO INDICATE A HIGH SEG
HRLM T1,JOBHCU##(R) ; SAVE IS IN PROGRESS
MOVE J,JBTSGN##(J)
PUSHJ P,OUTHGH## ;OUTPUT HIGH SEG
PUSHJ P,SGIOCK ;ERRORS?
JRST EXEXIT ;AND EXIT
>;END IFE FTVM
RELDR3: MOVE T1,P3 ;GET PAGE NUMBER
LSH T1,PXWLSH ;CONVERT TO ADDRESS
SOS T1 ;=START OF PAGE-1
HRRM T1,SGALEN(R) ;STORE IN IOWD
PUSH P,P1 ;SAVE P1
OUTPUT SGALEN ;WRITE OUT THIS PAGE
POP P,P1 ;RESTORE IT
PUSHJ P,SGIOCK ;CHECK FOR ERRORS
JRST RELDR2 ;NO, GO BACK FOR MORE
;STILL IN FTEXE CONDITIONAL
IFN FTVM,<
;SUBROUTINE TO PERFORM A PAGE. UUO
;CALL:
; MOVE T1,[FUNCTION CODE,,0]
; MOVE T2,PAGE #
; PUSHJ P,PAGUUO
; RETURN HERE IF ERROR RETURN FROM PAGE. UUO
; GOOD RETURN
;
;
;ON EXIT, T1 CONTAINS THE PAGE NUMBER
PAGUUO::PUSHJ P,SAVE4## ;SAVE P1-P4
PUSH P,T2 ;SAVE PAGE # TO RETURN TO CALLER
HRRI T1,SGASAV+1 ;POINT TO ARGUMENT BLOCK
PUSH P,SGAHGH(R) ;SAVE SGAHGH
PUSH P,SGANEW(R) ; AND SGANEW
MOVEM T2,SGAHGH(R) ;STORE PAGE NUMBER FOR UUO
MOVEI T2,1 ;LENGTH OF ARG BLOCK
DMOVEM T1,SGASAV(R) ;STORE IN USER AREA
PAGE. SGASAV, ;DO THE UUO
SOS -3(P) ;ERROR
POP P,SGANEW(R)
POP P,SGAHGH(R)
JRST TPOPJ1## ;RESTORE PAGE # AND RETURN
;STILL IN IFN FTEXE AND IFN FTVM CONDITIONAL
;SUBROUTINE TO SET ACCESS ALLOWED BIT FOR PAGE
; (BIT MUST BE OFF)
;CALL:
; MOVE T1,PAGE#
; PUSHJ P,SETAA
; HERE ALWAYS
SETAA: HRRZ T2,T1 ;MOVE PAGE #
MOVSI T1,.PAGAA ;GET FUNCTION CODE
PUSHJ P,PAGUUO ;DO THE PAGE UUO
STOPCD CPOPJ,DEBUG,CSA, ;++CAN'T SET ACCESS ALLOWED
POPJ P,
>;END IFN FTVM
IFN FTVM,<
;SUBROUTINE TO PAGE OUT THE USER'S LOW SEGMENT ON A GETSEG
;THIS IS ONLY CALLED IF THE CURRENT USER IS "VIRTUAL".
;
;CALL:
; PUSHJ P,PAGLOW
; HERE ALWAYS
;
PAGLOW::MOVEI T1,1 ;START AT PAGE 0
PGLOW2: PUSHJ P,GTPME## ;GET THE MAP ENTRY
JUMPE T2,PGLOW3 ;IF NON-EXISTENT, JUMP
PUSHJ P,CKDIRP ;IS THIS A DIR PAGE?
AOJA T1,PGLOW2 ;YES, DON'T PAGE IT OUT
PUSHJ P,PAGOUT ;TRY TO PAGE THIS PAGE OUT
JFCL ;COULDN'T
AOJA T1,PGLOW2 ;GET NEXT PAGE
PGLOW3: SKIPN .UPMP+.UPREL ;DOES HE HAVE A NON-CONTIGUOUS CORE IMAGE?
POPJ P, ;NO, WE MUST HAVE COME TO END OF LOW SEG
CAIGE T1,PAGSIZ##-1 ;YES, ARE WE THRU ALL OF CORE?
AOJA T1,PGLOW2 ;NO
POPJ P, ;YES, EXIT
;STILL IN FTEXE CONDITIONAL
>;END IFN FTVM
;SUBROUTINE TO MAKE A SINGLE DIRECTORY ENTRY FOR A GIVEN PAGE
;CALL:
; MOVE P1,DIRECTORY POINTER
; MOVE P2,CURRENT FILE PAGE #
; MOVE P3,PAGE #
; PUSHJ P,MKNTRY
; RETURN HERE IF PAGE # IS TOO HIGH (.GTE. PAGSIZ)
; RETURN HERE OTHERWISE
;
;THIS ROUTINE EXPECTS THE "LAST" DIRECTORY ENTRY TO BE IN
; T3 AND T4. IT COMPUTES THE DIRECTORY FOR THE PAGE # IN P3,
; AND DETERMINES IF THIS NEW PAGE CAN BE INCLUDED IN THE
; DIRECTORY ENTRY FOR THE LAST GROUP OF PAGES. IF SO,
; THE REPEAT COUNT (IN T4) IS BUMPED AND CONTROL IS RETURNED.
; IF THIS PAGE NEEDS A NEW ENTRY, THE "OLD" ENTRY IS OUTPUT
; TO THE DIRECTORY, THE CURRENT FILE PAGE NUMBER IS UPDATED,
; AND THE NEW DIRECTORY ENTRY REPLACES THE OLD ONE IN T3,T4
;
;
MKNTRY: CAIL P3,EXESIZ ;TOO HIGH?
JRST NEWENT ;YES, OUTPUT LAST ENTRY AND EXIT
PUSHJ P,CMPBIT ;COMPUTE FLAG BITS FOR THIS PAGE
JRST CPOPJ1## ;NON-EXISTENT PAGE, EXIT AND IGNORE
JUMPE P3,[MOVE T3,T1 ;IF THIS IS THE 1ST PAGE,..
SETZ T4, ;MAKE IT THE LAST PAGE
JRST CPOPJ1##]
;PLEASE NOTE---THIS LAST CHECK ASSUMES
;THAT PAGE ZERO IS THE 1ST PAGE CHECKED.
;IF THIS IS NOT TRUE (I.E. IF THE DIRECTORY
; IS FORMED BY STARTING WITH PAGE 777
; AND PROCEDING BACKWARDS), THEN THIS
; ALGORITHM MUST BE CHANGED.
CAME T1,T3 ;ARE THE FLAG BITS THE SAME AS THE LAST PAGE
JRST NEWENT ;NO, FORM A NEW DIR ENTRY
LDB T2,[POINT 9,T4,8] ;GET LAST REPEAT COUNT
ADDI T2,1(T4) ;FIND # OF NEXT CONTIGUOUS PAGE
CAME T2,P3 ;IS THIS IT?
JRST NEWENT ;NO, FORM A NEW ENTRY FOR THIS PAGE
ADD T4,[1000,,0] ;YES, BUMP LAST REPEAT COUNT
JRST CPOPJ1## ;RETURN
;STILL IN IFN FTEXE CONDITIONAL..
;COME HERE TO FORM A NEW DIRECTORY ENTRY
NEWENT: TLZE T3,SV%ABZ ;ALLOCATED BUT ZERO PAGE?
JRST NWENT2 ;YES
HRR T3,P2 ;NO, GET CURRENT FILE PAGE #
LDB T2,[POINT 9,T4,8] ;GET LAST REPEAT COUNT
ADDI P2,1(T2) ;COMPUTE NEW FILE PAGE #
NWENT2: HRRZ T2,P3 ;GET THIS PAGE #
EXCH T1,T3 ;GET 1ST WORD OF LAST ENTRY
EXCH T2,T4 ;GET 2ND WORD
PUSHJ P,PTNTRY ;STORE IT IN DIRECTORY
CAIL P3,EXESIZ ;LAST PAGE?
POPJ P, ;YES, GIVE NON-SKIP RETURN
JRST CPOPJ1## ;NO, SKIP RETURN
;STILL IF IFN FTEXE CONDITIONAL...
IFN FTVM,<
;SUBROUTINE TO PAGE OUT A PAGE
;CALL:
; MOVE T1,PAGE #
; PUSHJ P,PAGOUT
; HERE IF CAN'T PAGE IT OUT
; HERE IF CAN AND DID
;
;T1 IS PRESERVED
PAGOUT::MOVE J,JOB## ;JUST FOR SAFETY
PUSH P,T1 ;SAVE PAGE #
LSH T1,P2WLSH## ;CONVERT IT TO AN ADDRESS
MOVE T2,T1
PUSHJ P,INPFH## ;THIS PAGE PART OF PFH?
JRST TPOPJ## ;YES, RESTORE T1 AND RETURN
HRRZ T1,JOBINT##(R) ;GET START OF INTERRUPT BLOCK
TRZ T1,PAGSIZ##-1 ;FIND START OF PAGE
CAIN T1,(T2) ;IS THIS THAT PAGE?
JRST TPOPJ## ;RESTORE PAGE # AND RETURN
MOVE T1,0(P) ;GET PAGE # BACK AGAIN
PUSHJ P,GETPAC## ;GET PAGE ACCESSABILITY
TLNE T1,(PA.CPO) ;CAN IT BE PAGED OUT?
JRST TPOPJ## ;NO, RESTORE T1 AND EXIT
MOVE T2,(P) ;GET PAGE #
TLO T2,(1B0) ;SET DESTORY BIT
MOVSI T1,.PAGIO ;GET FUNCTION CODE
PUSHJ P,PAGUUO ;DO THE UUO
JRST TPOPJ## ;I/O ERROR
JRST TPOPJ1## ;IT'S OUT
;STILL IN FTVM AND FTEXE CONDITIONAL...
>;END IFN FTVM
IFN FTVM,<
;SUBROUTINE TO PAGE IN A PAGE
;CALL:
; MOVE T1,PAGE #
; PUSHJ P,PAGIN
; ERROR RETURN
; OK RETURN
PAGIN::
PUSH P,T1 ;SAVE PAGE #
HRRZ T1,.PDCVL##(W) ;GET USER'S PHYSICAL LIMIT/GUIDELINE
LDB T2,IMGIN## ;AND HOW MANY PAGES ARE IN CORE
TRZ T1,400000 ;CLEAR LIMIT BIT
CAML T2,T1 ;EXCEEDING LIMIT?
JRST PAGIN2 ;YES. GO PAGE OUT A PAGE
PAGIN1: POP P,T2 ;GET PAGE #
MOVSI T1,.PAGIO ;GET FUNCTION CODE
PUSHJ P,PAGUUO ;PAGE. UUO
SKIPA T2,SGASAV(R) ;SOMETHING HAPPENED, GET THE ERROR
; CODE WHICH WAS RETURNED IN USER AC'S
JRST CPOPJ1## ;SUCCESS
CAIE T2,PAGLE% ;LIMIT EXCEEDED IS OK
POPJ P, ;ANYTHING ELSE IS FATAL
PUSH P,T1 ;SAVE PAGE-IN PAGE #
PAGIN2: MOVEI T1,1 ;TRY TO PAGE OUT SOME PAGES
PAGIN3: PUSHJ P,CKDIRP ;A DIRECTORY PAGE?
CAIA ;YES, CAN'T PAGE IT OUT
PUSHJ P,PAGOUT ;TRY TO PAGE IT OUT
JRST [CAIE T1,PAGSIZ##-1 ;THRU ALL PAGES?
AOJA T1,PAGIN3 ;NO, TRY AGAIN
JRST PAGIN1] ;YES, FATAL ERROR
POP P,T1 ;GET PAGE BACK
JRST PAGIN ;TRY AGAIN TO PAGE IT IN
;STILL IN IFN FTEXE AND IFN FTVM CONDITIONAL
;ROUTINE TO READ IN A PAGE THAT HAD TO BE OUTPUT EARLIER
;CALL:
; MOVE P4,DISK-ADDRESS-OF-PAGE
; MOVE P1,PAGE-ADDRESS
; PUSHJ P,GTSAVP
; RETURN HERE ALWAYS IF OK
GTSAVP: HRRZ T2,P4 ;GET DISK ADDRESS
HRRZ T1,P1 ;GET PAGE ADDRESS
LSH T1,W2PLSH## ;MAKE INTO A PAGE NUMBER
PUSHJ P,IPCINS## ;CREATE PAGE
STOPCD CPOPJ,DEBUG,DPL, ;++DIRECTORY PAGE LOST
POPJ P,
;SUBROUTINE TO GET A FREE PAGE FROM USER'S PAGE MAP
;CALL:
; PUSHJ P,GTFREP
; HERE IF COULDN'T
; HERE IF DID, PAGE # IN T1
;
;IF THIS ROUTINE IS ENTERED AT GTFREP, IT WILL START SEARCHING
; AT PAGE 777.
;IF ENTERED AT GTFRE2, IT WILL START SEARCHING AT THE PAGE # IN T1.
;
GTFREP::MOVEI T1,PAGSIZ##-1 ;START AT PAGE 777
GTFRE2::PUSHJ P,GTPME## ;GET MAP ENTRY
JUMPE T2,CPOPJ1## ;IF NON-EXISTENT, ITS OK
SOJN T1,GTFRE2 ;DECREMENT PAGE # AND TRY AGAIN
POPJ P, ;COULDN'T
;STILL (YES, STILL) IN IFN FTEXE AND IFN FTVM CONDITIONAL...
;SUBROUTINE TO CHECK IF A GIVEN PAGE IS A DIRECTORY PAGE
;CALL:
; MOVE T1,PAGE #
; PUSHJ P,CKDIRP
; HERE IF THIS PAGE IS A DIRECTORY
; HERE IF NOT
;
;ON RETURN, T3 POINTS TO WHERE THE DIRECTORY PAGE
; POINTER IS BEING KEPT (P1, SGANAM, OR SGAEXT)
;T1,T4 PRESERVED
;T2 DESTROYED
CKDIRP::PUSH P,T1 ;SAVE PAGE NUMBER
LSH T1,P2WLSH## ;MAKE INTO AN ADDRESS
HRRZ T2,P1 ;GET CURRENT DIRECTORY POINTER
TRZ T2,PAGSIZ##-1 ;CLEAR OFFSET
MOVEI T3,P1 ;ASSUME ITS' THERE
CAMN T1,T2 ;IS THIS A DIR PAGE?
JRST TPOPJ## ;YES, RESTORE PAGE # AND EXIT
MOVEI T3,SGANAM(R) ;ASSUME IT'S HERE
CAMN T1,SGANAM(R) ;IS IT?
JRST TPOPJ## ;YES, RESTORE T1 AND EXIT
CAMN T1,SGAEXT(R) ;IS IT THIS ONE?
AOJA T3,TPOPJ## ;YES
AOJA T3,TPOPJ1## ;NO, SKIP RETURN
;SUBROUTINE TO PAGE IN A PAGE, IF IT'S OUT
;CALL:
; MOVE T1,PAGE #
; PUSHJ P,YANKIT
; RETURN HERE IF PAGE ALLOCATED BUT ZERO (T1=PAGE NUMBER)
; RETURN HERE WITH PAGE BITS IN T2
YANKIT::PUSH P,T1 ;SAVE PAGE BITS
PUSHJ P,GETPAC## ;GET PAGE BITS
MOVE T2,T1 ;MOVE BITS
POP P,T1 ;GET PAGE # BACK
TLNE T2,(PA.ZER)
POPJ P,
PUSH P,T2 ;SAVE BITS
TLNE T2,(PA.OUT) ;IS IT OUT?
PUSHJ P,PAGIN ;YES, BRING IT IN
JFCL ;NOT OUT
JRST T2POJ1## ;RESTORE PAGE BITS
>;END IFN FTVM
;ROUTINE TO COMPUTE THE FLAG BITS FOR THE DIRECTORY ENTRY
;CALL:
; MOVE P3,PAGE #
; PUSHJ P,CMPBIT
; RETURN HERE IF PAGE WAS NON-EXISTENT
; RETURN HERE OTHERWISE
;
;ON RETURN, T1 WILL HAVE THE FLAG BITS SET UP PRECISELY AS THEY
; SHOULD APPEAR IN THE DIRECTORY ENTRY (I.E. IN THE LEFT-MOST BITS)
;IF THE PAGE IS ALLOCATED-BUT-ZERO, THE "SV%ABZ"
; BIT WILL BE SET ALSO.
; THIS BIT IS LATER TRANSFORMED INTO A FILE PAGE NUMBER OF ZERO.
;
;NOTE THAT THE DIRECTORY PAGE IS TREATED AS BEING
; NON-EXISTENT, EXCEPT IN NON-VM SYSTEMS WHEN
; WE ARE NOT ZERO-COMPRESSING (THE DIRECTORY IS USER AC'S).
CMPBIT:
IFN FTVM,<
PUSH P,T3 ;SAVE T3 (T3 AND T4 ARE CURRENT DIRECTORY ENTRY)
PUSH P,T4 ;SAVE T4
MOVE T1,P3 ;GET PAGE #
PUSHJ P,GETPAC## ;GET PAGE MAP ACCESSABILITY BITS
MOVE T2,T1 ;SAVE BITS
POP P,T4 ;RESTORE OLD DIR ENTRY
POP P,T3
TLNE T2,(PA.NXP) ;PAGE EXIST?
POPJ P, ;NO, EXIT
SETZ T1, ;CLEAR BITS FOR ENTRY
TLNE T2,(PA.WRT) ;CAN IT BE WRITTEN?
TLO T1,SV%WRT ;YES, SET BIT
TLNE T2,(PA.ZER) ;ALLOCATED BUT ZERO?
TLO T1,SV%ABZ ;YES, SET THAT BIT IN FLAGS
SKIPN .UPMP+.UPHSS ;IS THERE A HISEG?
JRST CMP2 ;NO
MOVE T2,P3 ;YES, GET PAGE #
LSH T2,P2WLSH## ;MAKE INTO AN ADDRESS
CAML T2,.UPMP+.UPHSS ;MUST BE GREATER THABN HISEG START
CAMLE T2,.UPMP+.UPHSE ; AND LESS THAN END
JRST CMP2 ;ITS NOT IN THE HIGH SEG
TLO T1,SV%HIS ;SET HISEG BIT
>;END IFN FTVM
IFE FTVM,<
MOVE P4,P3 ;GET PAGE # TEMPORARILY
LSH P4,PXWLSH ;MAKE INTO AN ADDRESS
MOVE J,JOB## ;INSURE THAT JOB # IS CORRECT
HLRZ T2,JBTADR##(J) ;GET PROTECTION FOR LOW SEG
CAMLE P4,T2 ;IS THIS ADDRESS IN THE LOW SEG?
JRST NOLOW ;NO
MOVSI T1,SV%WRT ;YES, SET WRITABLE BIT IN DIRECTORY
JRST CMP2 ; AND CONTINUE
NOLOW: PUSHJ P,HSVAD## ;GET HIGH SEG LIMITS
CAML P4,T2 ;IF IT'S LESS THAN START OF HIGH SEG
CAMLE P4,T1 ; OR HIGH THAN TOP OF HIGH SEG
POPJ P, ;THEN, IT'S A NON-EXISTENT PAGE
MOVSI T1,SV%HIS ;IT'S IN THE HIGH SEG, SET THAT BIT
>;END IFE FTVM
TLNN P1,SV%SAV ;WAS THIS AN "SAVE" COMMAND?
TLO T1,SV%SHR ;NO, SET SHARABLE BIT TOO
MOVE J,JOB## ;GET JOB #
SKIPG JBTSGN##(J) ;SPY SEG?
POPJ P, ;YES, IGNORE IT
IFN FTKI10!FTKL10,<
MOVEI T2,JS.XO ; AND EXECUTE ONLY BIT
TDNE T2,JBTSTS##(J) ;IS IT SET?
TLO T1,SV%CON ;YES, MUST BE CONCEALED
>;END IFN FTKI10
JRST CPOPJ1## ;RETURN SINCE DIR CAN'T BE IN HIGH SEG
CMP2:
IFE FTVM,<
TRNN P1,PAGNUM ;ARE WE ZERO-COMPRESSING?
JRST CMP3 ;NO, IGNORE THIS STUFF
>
PUSH P,T3 ;SAVE OLD ENTRY
PUSH P,T4
PUSHJ P,CHKABZ ;IS THIS PAGE ALL ZEROES?
TLO T1,SV%ABZ ;YES, SET BIT
POP P,T4 ;RESTORE IT
POP P,T3
CMP3: HRRZ T2,P1 ;GET ADDRESS OF DIRECTORY PAGE
LSH T2,WXPLSH ;CONVERT TO PAGE #
IFN FTVM,<
CAIE T2,(P3) ;IS THIS THE DIRECTORY PAGE?
JRST CPOPJ1## ;NO, RETURN TO CALL+2
TLNN P1,SV%FUL ;YES, DID WE HAVE TO WRITE OUT
POPJ P, ; A PAGE EARLIER?..EXIT IF NO
; AND TREAT THE DIRECTORY PAGE AS NON-EXISTENT
HLLZ T1,P4 ;YES, GET SAVED BITS FOR WRITTEN-OUT
JRST CPOPJ1## ; AND EXIT AS IF THIS WERE THAT PAGE
>;END IFN FTVM
IFE FTVM,<
JUMPE T2,CPOPJ1## ;OK IF DIR IS IN PAGE 0
IFN FTKA10,<
CAIE P3,-1(T2) ;IS THIS 1ST PAGE OF EXTRA 1K?
>
CAIN P3,(T2) ;IS THIS THE DIRECTORY PAGE?
; OR ON KA'S, IT MAY BE EXTRA PAGE
; ALLOCATED ON 1K BOUNDRY
POPJ P, ;YES, TREAT PAGE AS NON-EXISTENT
JRST CPOPJ1## ;NO, PAGE IS VALID
>;END IFE FTVM
;COME HERE FOR A VARIETY OF USER SINS
GTABRT::
SVABRT: MOVE J,JOB## ;GET JOB NUMBER
MOVSI T1,(JS.EXE) ;GET EXE SAVE FILE BIT
ANDCAM T1,JBTST2##(J) ;CLEAR IT
HRRZS USRHCU## ;CLEAR SAVE IN PROGRESS FLAG
HRRZS JOBHCU##(R) ;AND IN USER'S JOB DATA AREA
PUSHJ P,SGRELE
JSP T1,PHOLD
ASCIZ #I/O error for EXE file#
;COME HERE IF A BAD RETURN FROM "CMPBIT" OCCURED:
BRCSTP: STOPCD SAVERR,DEBUG,BRC, ;++BAD RETURN FROM CMPBIT
;ROUTINE TO CHECK IF THIS USER IS TRYING TO SAVE A NEW-STYLE (.EXE)
; SAVE FILE
;
;CALL:
; MOVE J,JOB-NUMBER
; PUSHJ P,CHKEXE
; HERE IF YES
; HERE IF NO
;
;ALL AC'S PRESERVED
;
CHKEXE::PUSH P,T1 ;SAVDDL NEEDS T1 SAVED
MOVE T1,JBTST2##(J) ;GET JOB STATUS WORD
TLNE T1,(JS.EXE) ;IS THE "EXE" BIT SET? (WHICH
; MEANS THAT WE ARE DOING A
; SAVE OF AN EXE FILE)
JRST TPOPJ ;YES, RESTORE T1 AND EXIT
JRST TPOPJ1## ;NO, EXIT AT CALL+2
;SUBROUTINE TO CHECK IF A PAGE IS ALL ZEROES TO ENABLE IT
; TO BE COMPRESSED
;CALL:
; MOVE P3,PAGE # TO CHECK
; PUSHJ P,CHKABZ
; RETURN HERE IF PAGE IS ALL ZEROES
; HERE OTHERWISE
;
; T2 IS DESTROYED
;
CHKABZ:
PUSH P,T1 ;SAVE T1
IFN FTVM,<
MOVE T1,P3 ;SET PAGE #
PUSHJ P,YANKIT ;IF OUT, BRING IT IN
JRST TPOPJ##
TLNN T2,(PA.AA)
PUSHJ P,SETAA
> ;END OF FTVM
MOVE T2,P3 ;FETCH PAGE #
LSH T2,PXWLSH ;MAKE INTO AN ADDRESS
IFN FTKA10,<
ADDI T2,(R) ;RELOCATE ADDRESS
>;END IFN FTKA10
HRLI T2,-EXESIZ ;FORM AOBJ WORD
ABZ2: EXCTUU <SKIPE (T2)> ;IS THIS LOCATION ZERO?
JRST TPOPJ1## ;NO, SKIP RETURN
AOBJN T2,ABZ2 ;LOOP THRU ENTIRE PAGE
JRST TPOPJ## ;PAGE MUST BE ALL ZERO, NON-SKIP RETURN
;SUBROUTINE TO PUT OUT 1 DIRECTORY ENTRY
;CALL:
; MOVE T1,1ST WORD OF DIRECTORY ENTRY
; MOVE T2,2ND " "
; PUSHJ P,PTNTRY
; RETURN HERE
;
;
PTNTRY: PUSH P,T2 ;SAVE T2 IN CASE PAGE MUST BE WRITTEN OUT
PUSHJ P,PTDIRW ;OUTPUT THIS WORD
POP P,T1 ;RESTORE 2ND WORD TO ENTRY AND
; PJRST PTDIRW ; STORE IT
;SUBROUTINE TO STORE A WORD IN THE DIRECTORY
;CALL:
; MOVE P1,ADDRESS-TO-PUT-WORD
; MOVE T1,WORD-TO-PUT
; PUSHJ P,PTDIRW
; RETURN HERE
;
PTDIRW: HRR M,P1 ;GET CURRENT DIRECTORY POINTER
PUSHJ P,PUTWDU## ;STORE WORD IN USER AREA
AOS P1 ;BUMP POINTER
TRNE P1,EXESIZ-1 ;DID WE OVERLAP ONTO A NEW PAGE?
POPJ P, ;NO
SUBI P1,EXESIZ ;YES, BUMP POINTER BACK TO LAST PAGE
; PJRST PUTDIR ;OUTPUT DIRECTORY (MAYBE)
;SUBROUTINE TO OUTPUT THE CURRENT DIRECTORY PAGE
;CALL:
; HRLI P2,DIRECTORY-PAGE-COUNTER
; MOVE P1,ADDRESS-OF-THIS-PAGE
; PUSHJ P,PUTDIR
; RETURN HERE ALWAYS
PUTDIR: PUSHJ P,SAVT## ;AT LEAST T3 AND T4 ARE IMPORTANT
ADD P2,[1,,0] ;BUMP # OF DIRECTORY PAGES
MOVEI T1,-1(P1) ;GET ADDRESS-1 OF I/O
MOVEI T2,SGALEN ;SAVE ADDR OF IOWD
IFE FTVM,<
TRNE P1,PAGNUM ;PAGE 0 CORRECT?
JRST .+3 ;NO
HRRM T1,SGAHGH(R) ;STORE IT
SKIPA T2,[SGAHGH]
>
HRRM T1,SGALEN(R) ;STORE IN IOWD
PUSH P,P1 ;SAVE P1 (OUTPUT KILLS IT)
PUSH P,P4 ;SAVE P4 TOO
TLNN P1,SV%DWO ;DO WE REALLY WANT TO WRITE IT OUT?
OUTPUT (T2) ;YES, DO SO
PUTD2: POP P,P4 ;GET P4 BACK
POP P,P1 ;GET P1 BACK AGAIN
POPJ P, ;RETURN OK
;ROUTINE TO SET UP AN IOWD IN SGALEN
;
;CALL:
; MOVE T1,ADDRESS-OF-I/O
; PUSHJ P,STIOWD
; HERE ALWAYS
;
;T2 IS DESTORYED
STIOWD::HRRM T1,SGALEN(R) ;STORE ADDRESS
SOS SGALEN(R) ;=LOC-1
MOVNI T2,EXESIZ ;GET SIZE OF I/O (PAGE ASSUMED)
HRLM T2,SGALEN(R) ;STORE IN IOWD
POPJ P, ;RETURN
;SUBROUTINE TO DESTROY A PAGE
;CALL:
; MOVE T1,PAGE-ADDRESS
; PUSHJ P,ZAPPAG
; HERE IF ERROR
; HERE IF OK
IFN FTVM,<
ZAPPAG::LSH T1,W2PLSH## ;CONVERT TO PAGE #
TLO T1,(1B0) ;SET DESTORY BIT
; PJRST CRPAGE ;DO THE PAGE. UUO
;ROUTINE TO CREATE A PAGE
;
;CALL:
; MOVE T1,PAGE #
; PUSHJ P,CREPAG
; COULDN'T
; COULD AND DID
;
;T1 IS PRESERVED
CRPAGE::MOVE T2,T1 ;MOVE IT INTO ANOTHER AC
MOVSI T1,.PAGCD ;SET UP FUNCTION CODE FOR PAGE.
PUSHJ P,PAGUUO ;DO THE PAGE. UUO
SKIPA T2,SGASAV(R) ;ERROR--GET THE ERROR CODE
JRST CPOPJ1## ;SUCCESSFUL..GIVE SKIP RETURN
CAIE T2,PAGNV% ;DID WE TRY TO CREATE AN ALLOCATED-BUT-ZERO
; PAGE BUT WE WEREN'T VIRTUAL?
POPJ P, ;NO, GIVE FATAL ERROR RETURN
HRRZS T1 ;YES, SO GET JUST PAGE # AGAIN
; (WITHOUT "CREATE ON DISK" BIT) AND
JRST CRPAGE ; TRY TO CREATE IT AGAIN.
>;END OF IFN FTVM
>;END OF IFN FTEXE (WHICH BEGAN AT SAVEXE)
SUBTTL SAVGET -- GET AND RUN COMMANDS
;THIS JOB GETS A JOB AREA FROM A RETRIEVABLE DEVICE
;THIS JOB RUNS IN EXEC. MODE AND CALLS IO ROUTINES DIRECTLY
;NO ATTEMPT IS MADE TO RESTORE STATUS OF IO DEVICES, PC, OR AC'S
;JOBPC IS SET TO STARTING ADDRESS OF JOB
;CORE MUST ALREADY HAVE BEEN ASSIGNED AND THE FOLLOWING LOC. SETUP IN
;JOB DATA AREA:
;JOBPDP, JOBREL
GJOB: JSP T2,SG1 ;SETUP ACS, SETUP LOWER CORE(SGALEN,SGADMP)
PUSHJ P,GJOBX ;GET THE JOB
PUSH P,[0] ;CLEAR PC FLAGS SINCE THEY ARE MEANINGLESS
JSP T1,PHOLD## ;RETURN ONLY IF EVERYTING OK
ASCIZ /Job setup/
;THIS JOB GETS A JOB AREA FROM A RETRIEVAL DEVICE AND STARTS IT UP
;JOB HAS JUST A JOB DATA AREA ASSIGNED WHEN CONTROL GETS HERE
;THIS MONITOR JOB GETS A JOB AREA FROM A RETREIVABLE DEVICE
;ASSIGNS CORE AND START
RUNJOB: JSP T2,SG1 ;SETUP ACS, SETUP LOWER CORE(SGALEN,SGADMP)
PUSH P,P1 ;PUSH A FAKE WORD SO GETBTB CAN CLEAR LH JOBPD1
HRLZ T1,P1 ;RH P1 = STARTING ADDRESS INCREMENT
PUSH P,T1 ;FAKE UP BEGINNING OF RUN UUO PD LIST
JRST URUN1 ;GO FINISH UP AS IF RUN UUO
;TABLE OF PRIVILEGED CUSPS
;USED TO TURN ON JACCT WHEN R OR RUN COMMAND OR RUN UUO
PRVTAB:
IFN FTLOGIN,<
LGONAM::SIXBIT /LOGOUT/ ;NAME FOR "LOGOUT" (TURN OFF JLOG TOO)
SIXBIT /LOGIN/
QUENAM: SIXBIT /QUEUE/
SIXBIT /SPRINT/
IFN FTATTACH,<
SIXBIT /REATTA/
>
>
IFN FTCCLX,<
SIXBIT /PLEASE/
>
SIXBIT /UMOUNT/
IFN FTDAEM,<
SIXBIT /DAEMON/
SIXBIT /SAVER/
>
IFN FTPRV,<
SIXBIT /SYSTAT/ ;FOR PEEK UUO PRIVILEGE
>
IFN FTNET,<
;FOR REMOTE SPOOLERS TO
SIXBIT /LPTSPL/ ;FULL FILE ACCESS. SPOOLERS
SIXBIT /NETLDR/ ;PREVENT ABUSE OF THIS CAPABILITY.
>
PRIVN==.-PRVTAB ;NO. OF PRIVILEGED CUSPS
IFN PRIVN&FTPATT,<0> ;SAVE A WORD FOR PATCHING OVER
SUBTTL SAVGET -- RUN UUO
;CALL: MOVE AC,[XWD N,D]
; CALL AC,[SIXBIT /RUN/]
; ERROR RETURN ;UNLESS LH=HALT(PRINT CONSOLE MESS. IF YES)
; IK OK, TRANSFER TO C(JOBSA)+N FOR NEW PROGRAM
; USERS ACS CLOBBERED SO CANNOT PASS DATA TO NEW PROGRAM
;WHERE: D/ DEVICE NAME
; D+1/ FILE NAME
; D+2/ FILE EXT OR 0 (LH SIXBIT)
; D+3/ DATE ETC
; D+4/ PROJECT,PROGRAMMER NO OR 0(CURRENT UFD OR DTA,MTA)
; D+5/ HIGHEST LOC DESIRED(OR 0) ANALOGOUS TO RUN COMMAND
; LH IS IGNORED(RATHER THAN ASSIGNING CORE TO HIGH SEG)
URUN:: MOVSI T1,JLOG ;IS THIS JOB
TDNE T1,JBTSTS##(J) ;LOGGED IN?
JRST URUN1A ;YES, OK
MOVEI T1,NLIERR ;NO, GIVE HIM
PUSHJ P,SGRELE ;AN ERROR
MOVEI T1,LOGPLM ;SET Y ERROR MESSAGE
JRST PHOLD## ;START TTY + STOP JOB
URUN1A:
IFN FTFDAE,<
PUSHJ P,CALLF
PUSHJ P,SNDFXM
>
PUSHJ P,RESET## ;RELEASE DEVICES
; WARNING! THIS GOES VERY DEEP IN
; PUSHDOWN. SEE MCO 518
; (AC M PRESERVED IN RESET)
PUSHJ P,SAVE1## ;SAVE P1,P2
PUSHJ P,GETWDU## ;RESTORE CONTENTS OF USER'S CALLING AC
PUSHJ P,GETARG ;GET 6 ARGS FROM USER AND STORE
; SAVE STARTING ADDRESS INCREMENT(LH OF T1)
; AND USER AC NUMBER(IN CASE OF ERROR RETURN)
; SETUP ACS,F TO U
MOVEI P1,0 ;CLEAR FLAGS
IFN FTVM,<
MOVE T1,['RUNUUO'] ;NEED TO KNOW IF WE RUN GET
MOVEM T1,.UPMP+.UPUAC+4
MOVS T1,(P)
MOVEM T1,.UPMP+.UPUAC+6
>
;HERE ON R OR RUN COMMAND
URUN1:
PUSHJ P,GJOBX ;GET BOTH LOW AND HIGH SEGMENTS
;RETURN FILE NAME IF FROM REAL SYS, ELSE 0 IN T1
IFN PRIVN!FTTLIM!FT2REL,<
HLRZ T2,(P) ;GET STARTING ADDRESS INCREMENT
; SUPPLIED BY USER (0 IF RUN COM.)
CAILE T2,1 ;IS IT GREATER THAN 1 (REGULAR OR CCL
JRST URUN2 ; ENTRY POINT?)
;YES, DO NOT CHECK FOR SPECIAL CUSP FROM SYS
; SINCE IT WILL NOT BE ENTERED PROPERLY
>
IFN FTTLIM,< MOVSI T2,(JB.LSY) ;PREPARE TO SET FLAG
JUMPE T1,URUN3 ; IF IT CAME FROM SYS:
IORM T2,JBTLIM##(J) ; FOR BATCON
>
IFN PRIVN,<
PUSHJ P,PRVPG
JRST URUN3
IFN FTVM,<
CAME T1,LGONAM ;IS THIS THE LOGOUT CUSP?
JRST URUN4 ;NO
SETZM .PDCVL##(W) ;YES, MAKE SURE IT HAS ENOUGH CORE TO RUN
IFN FTGALAXY,<
PUSHJ P,CLRLOG## ;AND CLEAR JLOG
>>
URUN4: MOVSI T2,JACCT ;SET PRIVILEGED PROG. BIT
MOVE T3,JBTPPN##(J)
CAME T3,FSFPPN## ;OPR IS NEVER XCT ONLY
HRRI T2,JS.XO
IFN FTGALAXY,<
CAME T1,QUENAM ;IS IT QUEUE?
JRST URUN4A ;NO, SKIP CHECK
SKIPE %SIQSR ;YES, QUASAR RUNNING?
SETZ T2, ;YES, NO JACCT
> ;END IFN FTGALAXY
URUN4A:
IORM T2,JBTSTS##(J) ;SO NO CONTROL C AND ALL ACCESS
; TO FILES
>;END PRIV.CUSPS
IFN PRIVN!FTTLIM!FT2REL,<
JRST URUN3 ;GO START IT UP
URUN2: IFN FT2REL,< ;HERE IF BAD OFFSET
PUSHJ P,CHKMED## ;SET MEDDLE IF SHARABLE
>
MOVEI T1,JS.XO ;SEE IF EXECUTE ONLY
TDNE T1,JBTSTS##(J) ; IF SO, CLEAR OFFSET
SETZM (P) ; TO PROTECT JOB
> ;END PRIVN!FTTLIM!FT2REL
URUN3:
HLRZ T2,(P) ;GET STARTING ADDRESS INCREMENT(0 IF RUN COM)
ADD T2,JOBSA##(R) ;NOW ADD STARTING ADDRESS
;HERE FROM VMSER TO START DDT AFTER GETTING DDT
STARTU::TRNN T2,777700 ;SEE IF LEGITIMATE START ADDRESS
JRST URUNSA ;NO--GIVE THE USER AN ERROR
HRLI T2,USRMOD ;SET USER MODE BIT IN PC
PUSH P,T2 ;PUT ON PD LIST
IFN FTMS,< PUSHJ P,DPXST## ;SET UP PROPER RUNNABLE BITS FOR THIS JOB IN JBTSPS
>
JRST USRXIT## ;AND GO TO RETURN TO USER AS IF FROM UUO
URUNSA: PUSHJ P,SGRLE2 ;RELEASE DEVICE, GET TTY, TYPE ?
MOVEI T1,MESNSA ;SETUP MESSAGE
PJRST PHOLD## ;TYPE MESSAGE
;SUBROUTINE TO DETERMINE IF THE CUSP BEING RUN IS PRIVILEDGED
; ENTER WITH T1=NAME OF THE CUSP BEING RUN
; EXIT CPOPJ IF NOT PRIVILEDGED, CPOPJ1 IF IT IS
;PRESERVES T4
IFN PRIVN,<
PRVPG:: MOVSI T2,-PRIVN ;NO. OF PRIVILEDGED CUSPS
CAME T1,PRVTAB(T2) ;MATCH?
AOBJN T2,.-1 ;NO, KEEP LOOKING, FINISHED?
JUMPL T2,CPOPJ1## ;JUMP IF FOUND
POPJ P, ;NO MATCH
>
IFN FTFDAE,<
SNDFXM: MOVEI T1,.FDXIT
MOVEM T1,FILMSG##
MOVE T1,[FILMSG##+3,,FILMSG##+4]
SETZM FILMSG##+3
BLT T1,FILMSG##+11
MOVE T1,.PDSTR##(W)
MOVEM T1,FILMSG##+1
MOVE T1,.PDNAM##(W)
MOVEM T1,FILMSG##+2
MOVE T1,.PDDIR##(W)
MOVEM T1,FILMSG##+4
MOVE T4,JBTPPN##(J)
PUSHJ P,SENDFD##
POPJ P,
POPJ P,
;SUBROUTINE TO SEE IF FILE DAEMON SHOULD BE CALLED ON EXIT
;CALLING SEQUENCE:
; MOVE J,JOB NUMBER
; PUSHJ P,CALLF
;RETURNS CPOPJ IF FILE DAEMON SHOULD BE CALLED CPOPJ1 IF NOT
;PRESERVES T3,T4
CALLF: MOVSI T1,(JS.CFX)
TDNN T1,JBTST2##(J)
AOSA (P)
ANDCAM T1,JBTST2##(J)
POPJ P,
;SUBROUTINE TO SEE IF AN EXIT MESSAGE SHOULD BE SEND TO THE FILE DAEMON
; IF SO, DELAY THE COMMAND UNTIL THE MESSAGE IS SENT
CHKXTM: POP P,T4 ;RETURN ADDRESS
PUSHJ P,CALLF ;NO, SHOULD FILE DEAMON BE CALLED ?
CAIA ;YES
JRST (T4) ;NO, JUST DO THE COMMAND
TLO M,RUNFLG ;SO COMRET WILL LET US RUN
PJSP T2,MSTART## ;START THE MONITOR JOB
JSP T1,MONSTR## ;SETUP ACS
PUSHJ P,SNDFXM ;SEND THE "EXIT" MESSAGE TO THE FD
PUSHJ P,TTYFUW## ;FIND THE TTY
PUSHJ P,CNCMOD## ;TTY TO MONITOR MODE
PUSHJ P,COMSET## ;MAKE THE ORIGINAL COMMAND VISABLE
PJRST ESTOP## ;STOP THE JOB
> ;END IFN FTFDAE
SUBTTL SAVGET -- GETSEG UUO
;UUO TO GET JUST HIGH SEG AND RETURN TO USER
;CALL IS THE SAME AS FOR RUN UUO EXCEPT THAT OK RETURN IS SKIP RETURN
;IF ERROR RETURN HAS HALT IN LH, STANDARD CONSOLE MESSAGE IS PRINTED AND JOB STOPPED
UGTSEG::
IFN FTVM,<
MOVE T2,['GETSEG']
MOVEM T2,.UPMP+.UPUAC+4
MOVE T2,JOBPD1##(R)
MOVEM T2,.UPMP+.UPUAC+6
>
IFN FT2REL,<
MOVE T2,JBTSTS##(J) ;GET JOB STATUS
TLNE T2,JACCT ;IS JACCT ON
TLO P1,PHONLY ;YES, GETSEG MUST BE PHYSICAL ONLY
JRST UGETHI## ;IN SEGCON
>
UGTERR::MOVEI T1,ILUERR ;ILLEGAL UUO ERROR CODE
PUSHJ P,SGRELE ;SEE IF USER WANTS ERROR
JRST UUOERR## ;NO, PRINT ILLEGAL UUO
SUBTTL SAVGET -- COMMON CODE
;ROUTINE TO SETUP ACS, RESET IO, AND SETUP LOWER CORE LOCATIONS
;FOR SAVE AND GET(SGALEN SET TO IOWD OR PP IF DTA OR DSK)
;SGADMP SET TO IOWD FOR THIS SIZE CORE
;CALL: JSP T2,SG1
; ALWAYS RETURN HERE, UNLESS DEVICE NOT FOUND
; F SETUP TO DEVICE DATA BLOCK(BUT NOT INITED, UNLESS FT2REL=0)
; SO THAT INIT NOT NECESSARY IF SEG ALREADY KNOWN(NO DTA QUEUEING)
; DEVICE CHARACTERISTICS WORD(DEVMOD) RETURNED IN AC T2
; IF DISK SYSTEM
SG1:
JSP T1,MONSTR## ;SETUP R,P,R,J=JOB NUMBER
; PUT T2 ON END OF PD LIST(EXEC MODE PC,
; SO ERROR MESSAGES WILL ALWAYS PRINT(SEE SGRELE)
PUSHJ P,RESET## ;RELEASE ALL DEVICES
MOVE P1,SGAMOD(R) ;RESTORE PHYSICAL/LOGICAL BIT
SG2A: MOVEI T1,DR ;DUMP MODE 16(DUMP BY RECORDS
; IN CASE THIS IS MAGTAPE)
IFN FTPHYO,<
TLNE P1,PHONLY ;SEE IF PHYSICAL DEVICE
TLO T1,(1B0) ;YES -- SET FOR PHYSICAL OPEN
>
MOVEM T1,SGAMOD(R) ;STORE FOR OPEN UUO
SETZM SGAREN+1(R) ;FOR DELETE
SETZM SGAREN+2(R) ;FOR DELETE
HLLZS JOBCOR##(R) ;0 THIRD ARG IN JOBDATA AREA(SO CHKARG WILL
; WORK ON FIRST CALL(SAVE AND GET)
SETZM SGAHED(R) ;CLEAR BUFFER HEADER ARG. FOR OPEN UUO
IFE FT2REL,<
MOVEM W,SGAEND(R) ;SAVE W
IFN FTKI10!FTKL10,<
PUSHJ P,SETASA ;SET EXEC MODE UUO FLAG
>
OPEN 0,SGAMOD ;TRY TO ASSIGN DEVICE, SINCE IT MUST BE DONE
>
IFN FT2REL,<
MOVE T1,SGADEV(R) ;PHYSICAL OR LOGICAL DEVICE NAME
PUSHJ P,DEVSRG## ;FIND DEVICE AND SETUP F TO DDB
; DO NOT INIT DEV SINCE IO MAY NOT BE NECESSARY
; DO NOT WANT TO WAIT IN DTA SYSTEM
; TAPE QUEUE IN 10/40 SYS
>
JRST SGERRA ;NOT AVAILABLE
;DEVICE INITED(OR FOUND)
IFE FT2REL,<
MOVE W,SGAEND(R) ;RESTORE W
>
SETZM SGAEND(R) ;0 END OF DUMPE MODE COMMAND LIST
;COMMON EXIT FROM SAVHGH AND GETHGH ROUTINES(HIGH SEG SAVE AND GET)
;SO THAT SGA... LOCATIONS ARE RESTORED TO ORIGINAL VALUES FOR LOW SEG
SG3:: SKIPN T1,SGAEXT(R) ;DID USER SPECIFY AN EXTENSION ?
MOVSI T1,SAVDMP## ;NO, USE .SAV OR .DMP
MOVEM T1,SGAEXT(R) ;AND STORE FOR LOOK UP OR ENTER
MOVE T1,JOBFF##(R) ;FIRST FREE LOC IN JOB(SET FROM LH OF
; JOBSA WHICH IS SET BY LOADER
MOVEI T1,-1(T1) ;MAKE LAST LOC TO SAVE OR GET(MAKE 0=777777)
SKIPN USRDDT## ;USER DDT IN USE(IF YES, SAVE ALL OF CORE
; SO HIS SYMBOLS WILL BE INCLUDED
PUSHJ P,IADRCK## ;NO, ADDRESS TOO SMALL OR TOO LARGE?
MOVE T1,USRREL## ;YES, DUMP ALL OF CORE RATHER THAN GIVE
; ADDRESS CHECK MESSAGE-HIGHEST REL.ADR.
MOVNS T1 ;-HIGHEST ADR TO SAVE OR GET
ADDI T1,JOBSVM## ;LOWER CORE NOT DUMPED
HRLI T1,JOBSVM## ;IE FIRST LOC-1 TO BE DUMPED
MOVSM T1,SGADMP(R) ;STORE IOWD WORD OF THIS SIZE CORE
;ROUTINE TO SET-UP E+3 FOR ENTER
;ENTER: MOVS T1,DTA IOWD.
;USES T2
SG4::
IFN FTKI10!FTKL10,<
PUSHJ P,SETASJ ;SET EXEC MODE UUO FLAG
>
IFN FTDISK,<
MOVE T2,DEVMOD(F) ;RETURN DEVICE CHARACTERISTICS(IF DISK SYS)
TLNE T2,DVDSK ;IS THIS DEVICE A DISK?
MOVS T1,SGAPPN(R) ;YES, MAKE SURE FOURTH WORD IS PROJ,R NO.
>
MOVSM T1,SGALEN(R) ;NO, MAKE SURE FOURTH WORD IS IOWD FOR DECTAPE
; SINCE DECTAPE USES RH TO COMPUTE LENGTH IN K
; FOR BOTH SAVE AND GET
POPJ P,
;ERROR ON INIT OR DEVICE SEARCH
SGERRA::JUMPE F,SGERR1 ;WAS DEVICE FOUND, BUT JUST UNAVAILABLE?
MOVEM F,(P) ;YES, SAVE DDB ADDRESS FOR MESSAGE(ERNAM)
MOVEI T1,DNAERR ;ERROR CODE IN CASE RUN UUO(DEVICE NOT AVAILABLE)
PUSHJ P,SGRELE ;RETURN TO USER IF RUN UUO
; OR FIND TTY AND PRINT ?CRLF
PUSHJ P,ERNAM## ;PRINT DEVICE NAME USING (P)
JSP T1,PHOLD## ;START TTY AND STOP JOB
ASCIZ / not available/
SGERR1: MOVEI T1,NSDERR ;ERROR CODE IN CASE RUN UUO(NO SUCH DEVICE)
PUSHJ P,SGRELE ;RETURN TO USER IF RUN UUO
; OR FIND TTY AND PRINT ?CRLF
JSP T1,PHOLD## ;START TTY AND STOP JOB
ASCIZ /No such device/
SUBTTL SAVGET -- GET FILE FROM DEVICE (R,RUN,GET,GETSEG)
;ROUTINE TO GET FILE FROM DEVICE(LOW AND/OR HIGH)
;CALL: ACS R,P,F SETUP
; MOVE J,JOB NUMBER
; IFN FTDISK,<MOVE T2,DEVMOD(F) ;DEVICE CHAR.>
; PUSHJ P,GETJB
; RETURN ONLY IF ALL OK
; VALUE IN T1 = FILE NAME IF FROM REAL SYS, ELSO0., J PRESERVED
;
GJOBX: PUSHJ P,SETASA ;SET EXEC MODE UUO FLAG
IFN FTTLIM,< MOVSI T1,(JB.LSY) ;CLEAR GOTTEN FROM SYS: FLAG
ANDCAM T1,JBTLIM##(J) ; ..
>
MOVEI T1,JS.RUU ;SET RUN UUO/COMMAND FLAG
IORM T1,JBTSTS##(J) ; SO FILSER CAN READ EXECUTE-ONLY FILES
MOVEI T1,JS.XOR ;CLEAR XO-STATUS
IFN PRIVN,<
HRLI T1,JACCT ; AND JACCT
>
ANDCAM T1,JBTSTS##(J) ; ..
IFN FTFDAE,<
MOVSI T1,(JS.FXO)
ANDCAM T1,JBTST2##(J)
>
IFN FT2REL,<
PUSHJ P,GETHGH## ;SEE IF HIGH SEG ALREADY EXISTS AND BEING SHARED
; IF NOT, TRY TO LOOKUP AND READ IN HIGH FILE
; IF .SHR DOESN'T EXIST, TRY .HGH,
; IF NEITHER-SKIP RETURN
; T2=DEVMOD(F) IF DISK(DEV CHAR.)
JRST GJOB1 ;HIGH SEG NOW IN CORE AND NO LOW FILE NEEDED
IFN FTEXE,<
SKIPA ; LOW FILE NEEDED
; EITHER BECAUSE NO HIGH SEG OR HIGH SEG ALSO
; NEEDS LOW FILE
JRST GJOB5B ;RETURN HERE IF ENTIRE FILE
; (HIGH AND LOW SEGS) HAVE BEEN
; INPUT AND ARE READY TO GO.
>;END OF IFN FTEXE CONDITIONAL
>;END OF IFN FT2REL
PUSHJ P,LUKFIL ;LOOKUP LOW FILE
JRST NOFILE ;GO PRINT FILE.EXT NOT FOUND
GJOB4: HLRE T2,SGALEN(R) ;-NO. OF WORDS IN FILE
JUMPE T2,GETERR ;IF 0, GIVE ERROR MESSAGE
JUMPL T2,GJOB5 ;GO IF NUMBER OF WORDS
LSH T2,BLKLSH## ;NO. OF BLOCKS, CONVERT TO WORDS
MOVNS T2 ;MINUS NO. OF WORDS
HRLM T2,SGALEN(R)
GJOB5: PUSHJ P,CKIOWD ;CHECK USER'S SUPPLIED CORE ARG TO MAKE SURE NOT
; TOO SMALL, RETURN LARGER OF FILE SIZE OR CORE ARG
IFN FTVM,<
PUSH P,T1 ;SAVE CORE REQUIRED
PUSHJ P,MINGET ;REDUCE TO ONE PAGE IF VIRTUAL
POP P,T1 ;RESTORE CORE ARG
>
PUSHJ P,GETCOR ;OK, TRY TO GET CORE
MOVE T2,DEVMOD(F) ;DEVICE CHARACTERISTICS
MOVNS T1
ADDI T1,JOBSVM## ;-WORD COUNT FOR ALL USERS CORE
TLNE T2,DVMTA ;MAG TAPE?
HRLM T1,SGALEN(R) ;YES, USE USER-SPECIFIED CORE ARGUMENT
HRRZS JOBPD1##(R) ;TURN OFF USER MODE PC FLAG IN CASE THIS
; IS A RUN UUO,SO ERRORS WILL NOT TRY TO RETURN TO USER
PUSHJ P,SGDO ;READ IN FILE INTO LOW SEGMENT
INPUT 0,SGALEN ;EXECUTED FROM SGDO
IFN FTEXE,<
HLRZ T1,JOBSVM##-1(R) ;GET 1ST WORD OF FILE
CAIN T1,SV.DIR ;IS THIS AN EXE FILE?
JRST EXESAV## ;YES, GIVE ERROR MESSAGE
> ;END OF IFN FTEXE
MOVE T1,JOBS41##(R) ;RESTORE USER UUO JSR LOC
MOVEM T1,JOB41##(R) ;SAVED BY SAVE
GJOB5B: PUSH P,F ;SAVE SYSDEV BIT
IFN FTVM,<
SKIPN .UPMP+.UPREL ;NO LOWFIN IF NON-CONTIGUOUS
>;END OF IFN FTVM
PUSHJ P,LOWFIN ;MAKE SURE GOT ALL REQUESTED CORE
POP P,F ;NOW RESTORE F
JRST GJOB2 ;GO RELEASE DEVICES AND RETURN
;HERE IF HIGH SEG SAYS NO LOW SEG(AND USER DID NOT TYPE AN EXT)
GJOB1: PUSH P,F ;SAVE F SINCE IF NO LOOKUP WAS DONE IT IS
; NOT STORED IN USRJDA
IFN FTVM,<
PUSHJ P,MINGET
>
PUSH P,USRREL## ;MAX WHICH MUST BE CLEARED
PUSHJ P,LOWFIN ;INCREASE OR DECREASE SIZE
POP P,T1 ;RESTORE PREVIOUS SIZE
POP P,F ;RESTORE F
CAMLE T1,USRREL## ;SMALLER YET?
MOVE T1,USRREL## ;
IFN FTTIME,< MOVEI T2,MJOBDA##(T1) ;NO. OF WORDS TO CLEAR(-JOB DATA AREA)
ADDM T2,CLRWRD## ;INCREASE TOT. NO. WORDS CLEARED BY SYSTEM
>
IFN FTKI10!FTKL10,<
;SET T3=0 IF KI10
MOVEI T3,0 ; (USE XCT PAGED)
>
IFN FTKA10,<
HRRZ T3,R ;SET TO RELOCATE IF KA
>
MOVEI T2,JOBDA##+1(T3) ;FIRST ABSOLUTE LOC+1 TO CLEAR(JOB DATA
; AREA+2)=BLT DESTINATION ADR.
EXCTUU <SETZM -1(T2)> ;CLEAR THE FIRST WORD
HRLI T2,-1(T2) ;SET UP FIRST BLT SOURCE ADR(JOB DATA
; AREA+1)
ADDI T1,(T3) ;RELOCATE FINAL DEST.ADR.
EXCTUU <BLT T2,(T1)> ;CLEAR FROM 140 TO TOP OF LOW SEG
GJOB2: IFN FTVM,<
PUSHJ P,HSVAD## ;GET HIGHEST RELATIVE ADDRESS IN THE HI SEG
HRRM T1,.JDAT+JOBHRL## ;SET HIGHEST RELATIVE LOC FOR USER
>
MOVE T1,SGANAM(R) ;FILE NAME OF FILE OR SEGMENT
PUSH P,T1 ;SAVE POSSIBLE RETURN AS VALUE
TLNN F,SYSDEV ;IS DEVICE THE REAL SYS(AS OPPOSED TO LOGICAL)
SETZM (P) ;NO, SET FILE NAME TO 0 FOR RETURN
MOVEM T1,JBTPRG##(J) ;LOW SEG NAME FOR SYSTAT
PUSHJ P,EXONLY ;IF EXECUTE ONLY, PROTECT THE CORE IMAGE
IFN FTKI10!FTKL10,<
TDNE T2,JBTSTS##(J) ;IS IT EXECUTE ONLY?
PUSHJ P,MAPHGH## ;YES, MAKE SURE THE MAP REFLECTS THAT
>
MOVEI T1,JS.RUU ;CLEAR FLAG OF
ANDCAM T1,JBTSTS##(J) ; RUN UUO
PUSHJ P,FNDPDS## ;FIND THE PDB OR STOP
MOVE T1,JBTNAM##(J) ;STORE THE NAME OF THE PROGRAM
MOVEM T1,.PDNAM##(W) ; SINCE IT CAN BE CHANGED WITHOUT
; CHANGING THE CONTENTS OF THE CORE IMAGE
HRRZ T1,F ;IF (F)
CAIE T1,DSKDDB## ;=DSKDDB, NO LOOKUP DONE
JRST GJOB6 ;LOOKUP WAS DONE
MOVE J,JOB## ;JOB NUMBER
MOVE T1,JBTSGN##(J) ;HIGH SEGMENT NUMBER
MOVE T2,JBTPPN##(T1) ;DIRECTORY AND
MOVE T1,JBTDEV##(T1) ;STR WHERE PROGRAM CAME FROM
JRST GJOB7 ;STORE THEM
GJOB6: PUSHJ P,NAMSTR## ;STR
MOVE T1,DEVNAM(F) ;NOT A DSK, DEVICE NAME
MOVSI T2,DVDSK ;DEVICE IS A DSK BIT
TDNE T2,DEVMOD(F) ;IS IT A DSK?
SKIPA T2,DEVPPN(F) ;YES, GET DIRECTORY
MOVEI T2,0 ;NO, NO DIRECTORY
GJOB7: MOVEM T1,.PDSTR##(W) ;STORE STR OR DEVICE NAME
MOVEM T2,.PDDIR##(W) ;AND DIRECTORY
IFN FTWATCH&FTVERS,<
PUSHJ P,VERWAT ;SEE IF VERSION WATCHING
JRST GJOB8 ;NO
MOVSI T2,'S: ' ;YES -- PRESET SYS FLAG
SKIPE (P) ;SEE IF FROM SYS:
PUSHJ P,PRNAME## ;YES -- TYPE IT
PUSHJ P,VERBTH ;PRINT BOTH SEGMENTS
PUSHJ P,PGMFIL
PUSHJ P,PRRBKC ;PRINT RIGHT BRACKET <CRLF>
>
GJOB8: PUSHJ P,SGREL ;RELEASE DDB
IFN FTKI10!FTKL10,<
MOVSI T1,(R)
EXCTXU <BLT T1,17> ;SETUP USER'S ACS FROM SG AREA
>
JRST TPOPJ## ;RETURN WITH T1 = FILE NAME ONLY
; IF FROM REAL SYS,ELSE 0
;ROUTINE TO LOOKUP A LOW-SEGMENT FILE
;
;CALL:
; PUSHJ P,LUKFIL
; HERE IF NOT FOUND
; HERE IF FOUND
;
LUKFIL::
MOVE T1,DEVMOD(F) ;DEVICE CHARACTERISTICS
SKIPLE T2,JBTSGN(J) ;WAS THERE A HIGH SEGMENT?
TLNN T1,DVDSK ;YES, AND DID IT COME FROM THE DISK
JRST GJOB3 ;NO, JUST DO THE LOOKUP
SKIPN T1,DEVPPN(F) ;PPN FROM WHENCE THE HIGH SEGMENT CAME
MOVE T1,JBTPPN##(T2) ;NO LOOKUP WAS DONE FOR THE HI SEG
PUSH P,T1 ;SAVE THE PPN
MOVE T1,SGAPPN(R) ;GET USER SPECIFIED PPN
MOVEM T1,SGANAM+3(R) ;AND USE FOR LOOKUP
LOOKUP 0,SGANAM ;LOOKUP LOW SEGMENT FILE
SETOM DEVPPN(F) ;NOT FOUND
POP P,T1 ;RESTORE HIGH SEGMENT PPN
CAMN T1,DEVPPN(F) ;WAS LOW SEGMENT FOUND IN THE SAME UFD?
JRST CPOPJ1## ;SKIP ON
EXCH T1,DEVPPN(F) ;GET RETURNED VALUE, REAL HISEG PPN
AOJE T1,CPOPJ ;GO IF REAL LOOKUP ERROR
HLLZS SGAEXT(R) ;FILE NOT FOUND ERROR AS
POPJ P, ; SOMEONE IS TRYING TO CHEAT
GJOB3: LOOKUP 0,SGANAM ;LOOKUP LOW SEG FILE(EXT=SAV.DMP OR LOW(IF HIGH SEG
; REQUIRES LOW SEG AND USER DID NOT TYPE EXT)
; MODE=SAVMOD SO DECTAPE SERVICE WILL RETURN
; IOWD IN E+3(TEMPORARY)
POPJ P, ;NOT FOUND
JRST CPOPJ1## ;FOUND, SKIP RETURN
;ROUTINE TO CHECK VIRTUAL LIMITS ON A GET.
;
;CALL:
; MOVE T1,WORDS-NEEDED
; PUSHJ P,CKVLIM
; HERE IF NO ROOM
; HERE IF OK
;
IFN FTVM,<
CKVLIM: LSH T1,W2PLSH## ;PAGE #
HLRZ T2,.PDCVL##(W) ;GET VIRTUAL LIMIT
MOVSI T3,(UP.GET) ;CHECK GET BIT
TDNN T3,.UPMP+.UPBTS
CAIL T1,(T2) ;WANT MORE THAN THAT?
POPJ P, ;YES
JRST CPOPJ1## ;NO
> ;END OF IFN FTVM
IFN FTWATCH&FTVERS,<
;VERWAT -- START VERSION WATCH IF ON
;RETURN CPOPJ IF NOT OR DETACHED
;SKIP IF SO WITH U SETUP AND LEFT BRACKET TYPED
VERWAT::MOVSI T1,JW.WVR ;SEE IF WATCHING
TDNN T1,JBTWCH##(J) ; ..
POPJ P, ;NO
IFN FTMS,<
PUSHJ P,ONCPU0##
>
PUSHJ P,TTYFND## ;GET LDB
JUMPE U,CPOPJ## ;NONE
PUSHJ P,PRLBK ;PRINT LEFT BRACKET
JRST CPOPJ1## ;SKIP RETURN
>
;SUBROUTINE TO DETERMINE IF JOB OR SEGMENT WAS READ FROM AN EXECUTE
; ONLY FILE. IF SO PROTECT THE CORE IMAGE BY SETTING THE EXECUTE
; ONLY BIT. IF NOT CLEAR EXECUTE ONLY.
EXONLY::MOVE J,.C0JOB## ;GET THIS JOB NUMBER
MOVE T1,[JACCT,,JS.XOR]
MOVEI T2,JS.XO
MOVE T3,[IORM T2,JBTSTS##(J)]
IFN FTFDAE,<
MOVSI T4,(JS.FXO)
TDNE T4,JBTST2##(J)
JRST EXONL1
>
MOVE T4,JBTPPN##(J)
CAME T4,FSFPPN## ;DONT SET EXEC.ONLY FOR [1,2]
TDNN T1,JBTSTS##(J) ;EXEC.ONLY FILE?
HRLI T3,(ANDCAM T2,(J))
EXONL1: MOVEI T1,JS.RUU
TDNN T1,JBTSTS##(J)
CAME T3,[ANDCAM T2,JBTSTS##(J)]
XCT T3 ;SET OR CLEAR EXECUTE ONLY CORE IMAGE
POPJ P, ;RETURN
IFN FTVM,<
;SUBROUTINE TO REDUCE LOW SEGMENT SIZE TO ONE PAGE
; IF THE PROGRAM IS VIRTUAL. THIS IS NECESSARY
; (ONLY IN THE CASE OF A RUN UUO - RUN COMMAND
; CALLED GETMIN) TO MAKE SURE THAT THE MAP
; CONTAINS NO DISK ADDRESSES AND TO REMOVE PFH
; IF IT IS CONTAINED IN THE CORE IMAGE
MINGET: SKIPN .UPMP+.UPVRT ;VIRTUAL?
SKIPE .UPMP+.UPMEM ;OR NON-CONTIGUOUS
GET1PG::SKIPA T1,MINCOR ;YES
MINCOR: POPJ P,PAGSIZ##-1 ;NO, RETURN
HRRZM T1,SGACOR(R) ;ONE PAGE
CALLI SGACOR,200011 ;REDUCE LOW SEG IMAGE TO PAGE ZERO
JFCL ;CAN'T FAIL
HRRZS JOBPD1##(R) ;CLEAR USER MODE SINCE CAN'T RETURN TO USER
POPJ P, ;AND RETURN
>
;SUBROUTINE TO CLEAR VARIOUS TEM WHEN THE
; CONTENTS OF A CORE IMAGE IS CHANGED OR
; RENAMED (SAVE)
CLRTAB: MOVE T1,[JACCT,,JS.XO] ;CLEAR EXECUTE ONLY SO
ANDCAM T1,JBTSTS##(J) ; USER WILL NOT BE RESTRICTED
MOVSI T1,(JB.LSY) ;NO LONGER A PROGRAM
ANDCAM T1,JBTLIM##(J) ; FROM SYS
IFN FTFDAE,<
PUSHJ P,FNDPDS## ;POINT TO PDB
SETZM .PDNAM##(W) ;ZERO NAME
SETZM .PDSTR##(W) ; AND STR
SETZM .PDDIR##(W) ; AND PPN
>
POPJ P, ;RETURN
SUBTTL SAVGET -- IO ROUTINES
;ROUTINE TO RELEASE DEVICE AND FIND TTY
SGREL:: SKIPN F,USRJDA## ;HAS CHANNEL BEEN RELEASED ALREADY?
JRST SGREL2 ;YES, FIND TTY AND WAIT FOR OUTPUT TO FINISH
PUSH P,S ;NO,
MOVE T1,DEVMOD(F)
TLNE T1,DVMTA ;MAGTAPE?
TLNN F,INPB ;YES, WAS AN INPUT DONE?
JRST SGREL1 ;NO
CLOSE 0,CLSOUT ;YES, CLOSE MTA INPUT
STATO 0,IOTEND+IODEND ;AT END OF APTE?
MTAPE 0,16 ;NO SKIP TO EOF
SGREL1: RELEASE 0, ;NO RELEASE DEVICE
POP P,S
SGREL2:
PUSHJ P,CLRASA ;CLEAR EXEC MODE UUO FLAG
PUSHJ P,TTYFNU## ;FIND TTY FOR CURRENT USER SET J TO CURRENT JOB
IFE FTVM,<
SKIPE T2, USREPL## ;DID SAVE, GET, R, OR RUN CAUSE EXTENDED PD LIST?
PJRST GIVEPL## ;YES, RETURN IT TO FREE CORE
> ;END IFE FTVM
POPJ P,
;SUBROUTINE TO ADJUST LOW SEG CORE ACCORDING TO ARG
; ON GET OR PREVIOUS SAVE
;CALL: PUSHJ P,LOWFIN
; ALWAYS RETURN
LOWFIN:
HRRZ T1,JOBCOR##(R) ;CORE ARG FROM PREVIOUS SAVE(THIS MONITOR
; ALWAYS STORES SOMETHING)
SKIPN T1 ;IS THIS AN OLD FORMAT FILE WITH NO CORE ARG TO SAVE?
MOVE T1,USRREL## ;YES, USE ASSIGNMENT MADE WEN LOW FILE READ IN
PUSHJ P,CKSARG ;RETURN ONLY IF USER'S SUPLLIED ARG IS 0 OR NOT
; SMALLER THAN SAVE CORE ARG, RETURN LARGER
IFE FTVM,<
PUSHJ P,GETCOR ;TRY TO GET THIS AMOUNT OF CORE
>
IFN FTVM,<
HRRZM T1,SGACOR(R) ;STORE CORE ARGUMENT
PUSH P,T1 ;SAVE IN CASE OF AN ERROR
MOVE T1,SGANAM(R) ;NAME OF PROGRAM
PUSHJ P,PRVPG ;SHOULD IT BE NON-VIRTUAL?
TDZA T1,T1 ;NO
MOVEI T1,UPHNLY ;YES, LIGHT PHYSICAL-ONLY BIT
CALLI SGACOR,11(T1) ;TRY TO GET THE CORE (VIRTUAL OR PHYSICAL)
JRST NOROOM ;NOT AVAILABLE
>
MOVE T1,USRREL## ;HIGHEST LOC ASSIGNED TO LOW SEG
HRRM T1,JOBCOR##(R) ;SET INITIAL CORE ASSIGNMENT IN JOB DATA AREA FOR
; USER TO USE TO RESET CORE TO INITIAL SETTING WHEN
; PROGRAM IS RESTARTED
IFE FTVM,<
POPJ P,
>
IFN FTVM,<
JRST TPOPJ##
>
;ROUTINE TO EXECUTE DUMP MODE COMMAND LIST SETUP IN SGALEN(R)
;AND CHECK FOR ERRORS. USED ONLY TO READ LOW FILE.
;CALL: PUSHJ P,SGDO
; INPUT 0,SGALEN OR OUTPUT 0,SGALEN
; OK RETURN(NO ERRORS)
;SGDOA CALLED FROM SAVE, IT HAS ALREADY SET LH OF USRHCU=-2
;TO INDICATE CORE IS COMPRESSED
SGDO: HRROS USRHCU## ;SET LH OF USRCHU-1 AS A FLAG TO INDICATE SAVE GET
; LOW FILE IO IN PROGRESS, SO MONITOR WILL
; NOT STORE HIGH SEG PROTECTION IN JOBHRL WHICH
; HAS IOWD FOR ZERO COMPRESSION
SGDOA:
IFN FTEXE,<
SETZM SGAEND(R)
>
XCT @(P) ;EXECUTE INPUT OR OUTPUT UUO
MOVE J,JOB## ;READ INTO PROTECTED PART OF JOB DATA AREA
PUSHJ P,EXPAND ;EXPAND CORE IMAGE
JRST ADRERR## ;ADDRESS CHECK, PRINT MESSAGE AND STOP JOB
MOVE T1,JOBDDT##(R) ;COPY DDT STARTING ADR
MOVEM T1,USRDDT## ;INTO MONITOR PROTECTED AREA(IN CASE THIS IS GET)
SETZM USRHCU## ;FLAG THAT SAVE-GET IO FINISHED AND CORE EXPANDED
AOS (P) ;SKIP OVER UUO IN CALLING SEQUENCE
;ROUTINE TO CHECK FOR IO ERRORS(CALLED FROM SEGCON)
;CALL: MOVE F,DEVICE DATA BLOCK ADDRESS
; PUSHJ P,SGIOCK
; RETURN ONLY IF NO ERRORS
SGIOCK::MOVE S,DEVIOS(F) ;IO STATUS WORD FOR THIS DEVICE
TRNN S,IOBKTL!IODTER!IODERR!IOIMPM ;ANY ERRORS ON SAVE-GET DEVICE?
POPJ P, ;NO, GIVE OK RETURN
SGIO2: MOVEI T1,TRNERR ;YES, ERROR CODE IN CASE THIS IS RUN UUO
; (TRANSMISSION ERROR)
PUSHJ P,SGRELE ;RELEASE DEVICE AND ERROR RETURN TO USER IF RUN UUO
; OR FIND TTY AND PRINT ?CRLF
JSP T1,PHOLD## ;START TTY AND STOP JOB
ASCIZ /Transmission error/
SUBTTL SAVGET -- EXPAND COMPRESSED FILES
;ROUTINE TO EXPAND CORE AFTER A SAVE(LOW SEG ONLY)
;CALL: MOVE F,DEVICE ADR.
; MOVE R,JOBADR.
; MOVE J,JOB NUMBER
; PUSHJ P,EXPAND
; ERROR RETURN, ADR. CHECK, OR NEED CORE BUT NOT CURRENT USER(COMMAND
; DECODER EXPANDING AFTER USER HAS REDUCE CORE)
; OK RETURN, CORE EXPANDED
;CALLED FROM SAVE AND COMMAND DECODER
;START,CSTART,DDT,REENTER,SAVE,SSAVE COMMANDS IF CORE STILL COMPRESSED
EXPAND:
HLRE P3,SGALEN(R) ;-LENGTH OF FILE
MOVNS P3 ;+LENGTH OF FILE
ADDI P3,JOBSVM## ;ADD FIRST LOC-1 TO FORM HIGHEST LEGAL ADR.
IFN FTKI10!FTKL10,<
HRLI P3,0 ;KI10 STYLE RELOCATION
;IF KI10, LEAVE LH(P3)=0
; (USE XCT PAGED INSTEAD)
>
IFN FTKA10,<
HRLI P3,R ;PUT R IN LH FOR COMPARE
; P3 SET FOR ADDRESS CHECKING BELOW
>
SKIPL T1,JOBSV##(R) ;IF FIRST LOC IS POSITIVE
JRST SGDO1 ;OLD FORMAT, SO DONT EXPAND
AOJE T1,SGDO2 ;DO NOT EXPAND IF NOT COMPRESSED
PUSHJ P,SAVE1## ;SAVE P1
HRRZ T1,JOBSV##(R) ;LOOK AT 1ST WORD OF FILE
CAILE T1,JOBDDT## ;IS IT BELOW JOBJDA?
JRST EXPND1 ;NO. NEW COMPRESSED FORMAT
CAIE T1,JOBSAV## ;IS JOBDDT THE DATA WORD?
JRST EXPND1 ;NO. EXPAND
SKIPN JOBSV3##(R) ;IS THE SAVE FILE FROM CONVERT?
; CONVERT DOES NOT ZERO COMPESS
; IT JUST WRITES ENTIRE FILE WITH 1 IOWD IN FRONT
SOJA P3,SGDO1 ;YES, GO BLT DATA DOWN AS IF OLD DISK SAVE FILE
; (NON-COMPRESSED)
HRROI T1,JOBSD1## ;YES. CHANGE TO IOWD 1,JOBSDD
EXCH T1,JOBSV##(R) ;ZAP. THE IOWD IS FIXED
HLRES T1 ;WORD COUNT OF IOWD
AOJE T1,EXPND1 ;JUST 1 DATA WORD - THROUGH
MOVSI T1,1(T1) ;MAKE IOWD N-2,JOBSAV
JUMPE T1,EXPZ
HRRI T1,JOBSAV## ;SO NEXT DATA WDS WILL BE SKIPPED
MOVEI T2,JOBSV##(R)
MOVEM T1,2(T2) ;STORE IN COMPRESSED DATA
JRST EXPND1
EXPZ: MOVSI T1,-2
HLLM T1,JOBSV##(R)
;COME HERE TO DO THE ACTUAL EXPANSION OF A FILE
EXPND1: MOVEI T1,JOBSV## ;IT WAS READ INTO JOBSV
HLL T1,P3 ;LH(T1)=R IF KA,=0 IF KI
EXCTUX <MOVE T2,@T1> ;GET FIRST IOWD
EXPLP1: HRRZ P1,T2 ;ADDRESS OF IOWD
CAIGE P1,JOBSD1## ;LEGAL?
AOJA P1,TOOLOW ;NO. DELETE DATA WHICH IS TOO LOW
HLRE P1,T2 ;YES. GET WORDCOUNT
MOVNS P1 ;+N
HRLM P1,T2 ;CONVERT IOWD TO +N IN LH
ADDI T1,1(P1) ;ADDRESS OF NEXT IOWD
CAMLE T1,P3 ;IN BOUNDS?
JRST GETERR ;NO. COMPLAIN
ADDI T2,(P1) ;YES. CHANGE RH OF IOWD
EXCTUU <EXCH T2,@T1> ;MAKE IT XWD +N,A+N-1 AFTER DATA BLOCK
JUMPL T2,EXPLP1 ;CONTINUE IF NEXT THING IS AN IOWD
HLRZ P1,T2 ;GET LH OF SUSPECTED STARTING
CAIE P1,(JRST) ;IS IT JRST?
CAIN P1,(HALT) ;OR HALT?
SKIPA ;YES,
JRST EXPLP1 ;NO, LOOP BACK AND ASSUME JUST
; A COUNT OF GREATER THAN 128K
; GET ADDRESS CHECK MESSAGE IF FILE
; WAS NOT THAT BIG
PUSH P,T1 ;SAVE DATA LOCATION
EXCTUX <HRRZ T1,@T1> ;TOP REAL LOCATION NEEDED
TRO T1,PG.BDY## ;MAKE IT NK-1
HLRZ T2,R ;PRESENT SIZ OF LOW SEG
CAMG T1,T2 ;IS THERE ENOUGH?
JRST EXPCOR ;YES,
CAME J,JOB## ;NO, IS TIS THE CURENT JOB?
JRST SGDOER ;NO, GIVE ERROR RETURN, MUST BE COMMAND DECODER
; DOING EXPAND AFTER USER HAS REDUECED CORE
PUSHJ P,GETCOR ;YES. GET IT
EXPCOR: POP P,T2
IFN FTKI10!FTKL10,<
HLRZ T3,T2 ;T3=0 IFF KI10
>
MOVEI P1,@T2 ;TOP DATA LOC
HRLI P1,1(P1) ;SET TO ZERO TO TOP OF CORE
HRRI P1,2(P1)
EXCTXU <SETZM -1(P1)> ;ZERO FIRST LOC
HLL T1,T2 ;R INTO LH(T1) IF KA10
EXCTUU <BLT P1,@T1> ;CLEAR CORE
MOVEI T4,JOBSV## ;SET UP END-OF-LOOP WORD
HLL T4,T2 ;R IN LH(T4) IF KA10
HRROI T1,@T2 ;FROM DATA POINTER
EXPLP2:
EXCTUX <HRRZ P1,(T1)> ;TO DATA POINTER
MOVSS R ;CHECK ADR OF, IOWD
CAILE P1,(R) ;IN BOUNDS?
JRST GETER0 ;NO-ERROR
MOVSS R ;YES. OK
IFN FTKA10,<
ADDI P1,(R) ;RELOCATE
>
CAIGE P1,(T1) ;MAKE SURE WE DO NOT GO BACKWARDS
JRST GETERR ; CAN HAPPEN IF TOO MANY IOWDS W/O 0'S.
EXCTUX <HLRZ P2,(T1)> ;WORD COUNT
SUBI T2,1(P2) ;POINT T2 TO PREVIOUS IOWD
JUMPE P2,EXPLP5 ;FORGET IT IF ZERO WORD-COUNT
EXCTXU <SETZM (T1)>
SOSA T1 ;POINT TO DATA
EXPLP3: SOS P1
IFN FTKI10!FTKL10,<
CAIGE P1,JOBSDD##
JRST EXPLP5
JRST EXPLP6
> ;END CONDITIONAL FTKI10
IFN FTKA10,<
CAIGE P1,JOBSDD## ;DON'T STORE DATA BELOW JOBSDD
>
EXPLP5: SOSA T1
EXPLP6: EXCTUU <POP T1,(P1)> ;MOVE A DATA WORD
EXCTUU <SETZM 1(T1)> ;ZERO WHERE IT CAME FROM
SOJG P2,EXPLP3 ;LOOP IF MORE DATA
CAMLE T2,T4 ;THROUGH?
JRST EXPLP2 ;NO. DO NEXT BLOCK
EXCH P2,JOBSDD##(R) ;YES. ZERO JOBSDD
MOVEM P2,JOBDDT##(R) ;SET USER DDT STR ADR
JRST SGDO2 ;AND SETUP USRDDT IN MONITOR PROTECTED
; FROM THIS USER
;THIS ROUTINE WILL DELETE ALL DATA FROM A COMPRESSED FILE
;WHICH IS BELOW JOBSDD (PROBABLY WRITTEN BY TENDUMP)
TOOLOW: EXCTUX <HLRE P2,@T1> ;WORDCOUNT OF OFFENDING IOWD
JUMPGE P2,GETERR ;PROHIBIT AGAINST UNFORMATTED SAVE FILES
SUB P1,P2 ;ADDRESS+N
HLRZ T2,R ;PROTECTION
CAILE P1,(T2) ;ADR TOO HIGH?
JRST GETERR ;YES, COMPLAIN
CAIG P1,JOBSDD## ;IS ANY DATA IN IT LEGAL?
AOJA T1,NXIOWD ;NO, TEST NEXT IOWD
SUBI P1,JOBSDD## ;YES, NUMBER OF WORDS TO KEEP
MOVNS P2 ;TOTAL NUMBER OF WORDS
SUBB P2,P1 ;NUMBER OF WORDS TO DROP
HRLS P2 ;INTO BOTH HALVES
EXCTUX <ADD P2,@T1> ;NEW IOWD FOR ONLY GOOD DATA
ADDI T1,(P1) ;POINT T1 TO LAST BAD DATA LOC
EXCTXU <MOVEM P2,@T1> ;STORE UPDATED IOWD OVER IT
JRST IOWBLT ;GO BLT OVER BAD DATA
NXIOWD: SUB T1,P2 ;POINT T1 TO NEXT IOWD
CAMLE T1,P3 ;PROTECTION
JRST SGDOR2
EXCTUX <HRRZ P1,@T1> ;GET ADDRESS
CAIGE P1,JOBSD1## ;LEGAL?
AOJA P1,TOOLOW ;NO, AT LEAST PART OF THE DATA IS LOW
IOWBLT: EXCTUX <MOVSI T2,@T1> ;YES. KEEP THE ENTIRE IOWD DATA
HRRI T2,JOBSV## ;T2 IS A BLT POINTER
IFN FTKA10,<
ADDI T2,(R) ;RELOCATE BLT POINTER
>
SUBI T1,JOBSV## ;RH OF T1 IS AMOUNT BEING DELETED
SUBI P3,(T1) ;P3 POINTS TO TOP OF DATA READ IN-(N)
EXCTUU <BLT T2,@P3> ;MOVE ONLY GOOD DATA DOWN
JRST EXPND1 ;GO EXPAND THE GOOD DATA
SGDO1:
MOVEI T1,JOBDDT## ;MOVE EVERYTHING DOWN )MUST BE NON-COMPRESSED DSK FILE
IFN FTKA10,<
ADDI T1,(R) ;RELOCATE
>
HRLI T1,JOBSVD##(T1) ;OR CONVERT SAVE FILE
SKIPGE JOBSV##(R) ;IS THIS CONVERT FILE(FIRST WORD IS IOWD)?
HRLI T1,JOBSDP##(T1) ;YES, ALSO SKIP OVER IOWD
SUBI P3,JOBSVD##
EXCTUU <BLT T1,@P3>
SGDO2: AOSA (P) ;SET FOR OK RETURN
SGDOER: POP P,T1
SGDOR2:
SETZM JOBHCU##(R) ;CLEAR LH AND SET HIGHEST USER CHAN. IN
; USE TO 0(WHERE IT SHOULD BE ANYWAY)
POPJ P, ;ERROR RETURN OR OK RETURN
;ROUTINE TO CHECK USER SUPPLIED CORE ARG AND CHECK TO SEE IF 0
;OR GREATER THAN OR EQUAL TO IOWD USED TO SAVE OR GET FILE
;CALL: HLRE T2,-NO. OF WORDS IN FILE
; PUSHJ P,CKIOWD
; RETURN WITH LARGER OF 2 POSITIVE NOS. IN T1(1777 ORED IN)
; DO NOT RETURN IF CORE ARG SUPLLIED BY USER IS TOO SMALL
;CALLED FROM SAVE AND GET
CKIOWD: MOVEI T1,JOBSVM## ;FIRST LOC-1 READ OR WRITTEN IN USER AREA
HRRM T1,SGALEN(R) ;RESTORE RH TO JOBSAV AFTER LOOKUP
SUB T1,T2 ;HIGHEST LOC=FIRST LOC-1+LENGTH OF FILE
; FALL INTO CHSARG
;ROUTINE TO CHECK USER SUPPLIED CORE ARG AND CHECK IF 0
;OR GREATER THAN OR EQUAL TO CORE ARG FOR PREVIOUS SAVE
;CALL: HRRZ T1,JOBCOR(R) ;WRITTEN WHEN FILE SAVED
; PUSHJ P,CKSARG
; RETURN WITH LARGER OF 2 IN AC T1, ONLY IF USER ARG NOT TOO SMALL
;CALLED ONLY FROM GET AFTER JOB DATA AREA LOADED FROM FILE(JOBCOR) OR HIGH SEG
CKSARG: IORI T1,PG.BDY## ;MAKE SURE 1K-1
CAMLE T1,SGANEW(R) ;IS USER SUPPLIED ARG BIGGER?
JRST CKSAR1 ;NO
MOVE T1,SGANEW(R) ;YES, RETURN IT
POPJ P,
CKSAR1: PUSH P,T1 ;IN CASE OF ERROR
SKIPN SGANEW(R) ;DID USER SUPPLY ONE?
PJRST TPOPJ## ;NO, RETURN LARGER OF TWO
;ROUTINE TO PRINT #K OF CORE NEEDED
;CALL: PUSH P,HIGHEST REL. USER ADR.
; JRST NROOM
; NEVER RETURN
NOROOM: MOVEI T1,NECERR ;NOT ENOUGH CORE ERROR CODE
NROOM:: PUSHJ P,SGRELE ;RELEASE DEVICE AND ERROR RETURN TO USER IF RUN UUO
; OR FIND TTY AND PRINT ?CRLF
PUSHJ P,EXONLY ;SET JS.XO AS APPROPRIATE
HRRZ T1,(P) ;GET AMOUNT OF CORE REQUESTED
LSH T1,W2PLSH## ;CONVERT TO NO. OF 1K BLOCKS-1
PUSHJ P,DECP1## ;ADD 1 TO T1 AND PRINT DECIMAL
PUSHJ P,PRPORK ;PRINT "P" OR "K"
JSP T1,PHOLD## ;START TTY ADN STOP JOB
ASCIZ / of core needed/
SUBTTL SAVGET -- SUBROUTINES
;ROUTINE TO ASSIGN CORE FOR LOW AND HIGH SEG
;CALL: MOVE R,LOW SEG RELOCATION
; HRR T1,HIGHEST LOC DESIRED
; PUSHJ P,GETCOR
; RETURN ONLY IF ASSIGNED
GETCOR::
IFN FTEXE,<
PUSHJ P,SAVE1## ;SAVE P1 FOR EXE FILES
>
HRRZM T1,SGACOR(R) ;SOTRE CORE ARG FOR CORE UUO IN USER AC
PUSH P,T1 ;SAVE IN CASE OF ERROR
IFN FTVM,<
MOVE J,.C0JOB##
MOVE T4,T1
SKIPN T2,.UPMP+.UPREL
HLRZ T2,R
IORI T4,PG.BDY##
SUB T4,T2
LSH T4,W2PLSH##
PUSHJ P,GSIZT##
JRST GETGET
SKIPA T2,.UPMP+.UPBTS
JRST GETCR1
TLNN T2,(UP.GET)
JRST GETGET
>
GETCR1: CALLI SGACOR,200011 ;DO PHYSICAL-ONLY CORE UUO
JRST NOROOM ;NOT AVAILABLE, PRINT ERROR AND AMOUNT TRYING FOR
JRST TPOPJ## ;OK, REMOVE T1 FROM PD LIST AND RETURN
IFN FTVM,<
GETGET::MOVE T4,T1
MOVE T1,SGANAM(R)
TLNE F,SYSDEV
PUSHJ P,PRVPG
SKIPA T1,JBTSTS##(J)
JRST GETCR1
TLNE T1,JACCT
JRST GETCR1
GETGTS::LSH T4,W2PLSH##
HLRZ T2,.PDCVL##(W) ;CURRENT VIRTUAL LIMIT FOR JOB
MOVSI T3,(UP.GET)
TDNN T3,.UPMP+.UPBTS
CAIL T4,(T2) ;WANT MORE THAN THAT?
JRST NOROOM ;YES, ERROR
IORM T3,.UPMP+.UPBTS
JSP T1,MONSTR## ;RESET P TO AVOID PDL OVF SINCE STARTING ALL OVER
PUSHJ P,RMVPFH ;DELETE DEFAULT PFH, IF THERE
HRRZS USRHCU##
HRRZS JOBHCU##(R)
MOVEI T1,JS.RUU
ANDCAM T1,JBTSTS##(J)
MOVEI T1,.UPMP+.UPUAC-1
PUSH T1,SGADEV(R) ;NO, SAVE WHAT HE WANTS TO GET
PUSH T1,SGANAM(R)
PUSH T1,SGAEXT(R)
HLRZ T2,SGAEXT(R)
MOVE T3,SGAHGH(R)
CAIN T2,'LOW'
HLLZM T3,(T1)
PUSH T1,SGAPPN(R)
SETZM SGAPPN(R)
AOBJP T1,.+1 ;SKIP SIXBIT COMMAND OR UUO NAME
PUSH T1,SGANEW(R)
MOVE T1,[PHONLY,,DR]
MOVSI T2,'SYS'
SETZB T3,T4
DMOVEM T1,SGAMOD(R)
DMOVEM T3,SGAMOD+2(R)
MOVSI T1,'GET'
MOVEM T1,SGANAM(R)
DMOVEM T3,SGANAM+2(R)
MOVE T1,['SHRHGH']
MOVEM T1,SGAHGH(R)
MOVE T1,.UPMP+.UPUAC+4
TRNN T1,-1
PUSHJ P,GETMIN
HRRZS JOBPD1##(R)
IFN FTEXE,<
MOVSI T1,GTHGH
>
PUSHJ P,GETSEG##
JRST NOFILE
IFN FTEXE,<
JFCL
>
;CONTINUED ON NEXT PAGE
PUSHJ P,CLRASA
MOVSI T1,.UPMP+.UPUAC
EXCTXU <BLT T1,7>
HRRZ T2,.VJDT+.JBHSA##
MOVE T1,['GETSEG']
CAMN T1,.UPMP+.UPUAC+4
JRST STARTU
HRLZ T1,.VJDT+.JBHSA##
PUSH P,T1
HLLZS JOBSA##(R)
JRST URUN3
>
SETASJ::PUSH P,J ;SAVE J
MOVE J,.C0JOB## ;J=JOB NUMBER OF CURRENT JOB
PUSHJ P,SETASA ;MAKE AC REFERENCES BE TO THE SHADOW AREA
JRST JPOPJ## ;RESTORE J AND RETURN
SETASA::PUSHJ P,SAVE1## ;SAVE P1
MOVEI P1,JS.ASA ;LITE THE BIT WHICH INDICATES REFERENCES TO
IORM P1,JBTSTS##(J) ; LOCATIONS 0-17 IN THE USER'S AREA ARE TO SHADOW ACS
POPJ P, ;RETURN
CLRASA::PUSHJ P,SAVE1## ;SAVE P1
MOVEI P1,JS.ASA ;CLEAR THE BIT WHICH INDICATES REFERENCES TO
ANDCAM P1,JBTSTS##(J) ; USER LOCATIONS 0-17 ARE TO SHADOW ACS
POPJ P, ;AND RETURN
;ROUTINE TO PRINT NOT A SAVE FILE IF WRONG FORMAT FILE DETECTED
GETER0: MOVSS R ;"SAVE" FILE ISN'T RIGHT
GETERR::MOVEI T1,NSFERR ;ERROR CODE IN CASE THIS IS RUN UUO(NOT SAVE FILE)
PUSHJ P,SGRELE ;RELEASE DEVICE AND ERROR RETURN TO USER IF RUN UUO
; OR FIND TTY AND PRINT ?CRLF
JSP T1,PHOLD## ;START TTY AND STOP JOB
ASCIZ /Not a save file/
;ROUTINE TO PRINT FILE NOT FOUND OR NEEDS 2 RELOC REG
NOFILE::MOVEI T1,FNFERR ;ERROR CODE IN CASE THIS IS RUN UUO(FILE NOT FOUND)
; CHANGE ERROR CODE TO DISK ERROR CODE IF DEV IS DSK
PUSHJ P,SGRELL ;RETURN DISK LOOKUP OR ENTER ERROR CODE IF DSK
; RELEASE DEVICE AND ERROR RETURN TO USER IF HE WANTED
; OR FIND TTY AND PRINT ?CRLF
HRRZ T1,SGAEXT(R) ;SEE WHICH ERROR
JUMPN T1,LOOKFL ;NOT NOT FOUND
MOVE T2,SGANAM(R) ;PRINT FILE NAME
PUSHJ P,PRNAME##
PUSHJ P,PRPER ;PRINT PERIOD
HLLZ T2,SGAEXT(R) ;PRINT EXTENSION
PUSHJ P,PRNAME##
JSP T1,PHOLD## ;START TTY AND STOP JOB
ASCIZ / not found/
LOOKFL: PJSP T1,LKENFL ;LOOKUP ERROR - PRINT MESSAGE
ASCIZ /Lookup error /
LKENFL: PUSHJ P,CONMES ;ISSUE MESSAGE
HRRZ T1,SGAEXT(R) ;GET ERROR
SKIPE T1 ;SEE IF = 0
PUSHJ P,PRTDI8## ;NO - PRINT IN OCTAL
PJRST HOLD## ;STOP JOB
;ROUTINE TO RELEASE DEVICE ON AN ERROR AND CHECK TO SEE
;IF THIS IS A MONITOR COMMAND OR USER UUO
;IF USER UUO, GIVE ERROR RETURN TO USER UNLESS THERE IS A HALT
;IN LH OF EROR RETURN WORD, IN WHICH CASE FIND TTY, PRINT ?CRLF
;AND RETURN TO CALLER SO CAN ADD MORE INFO TO ERROR MESSAGE AND STOP JOB
;CALL: MOVEI T1,ERROR CODE(DEFINED IN S.MAC)
; PUSHJ P,SGRELE
;DO NOT RETURN TO CALLER IF USER WANTS ERROR RETURN ON RUN AND GETSEG UUOS
SGRELL: ;LOOKUP OR ENTER FAILURE
IFN FTDISK,<
MOVE T2,DEVMOD(F) ;IS THIS DEVICE A DISK?
TLNE T2,DVDSK
HRRZ T1,SGAEXT(R) ;YES, RETURN DISK SERVICE ERROR CODE
>
SGRELE::PUSH P,T1 ;SAVE T1
MOVE J,.C0JOB## ;GET JOB #
SKIPE JOBPD1##(R) ;SKIP IF SAVE IS IN PROGRESS
; IF IT IS NOT WE WANT TO KILL ANY
; HISEG WE MAY HAVE GOTTEN. THIS
; PREVENTS US FROM LEAVING AN EXECUTE
; ONLY HISEG ADDRESSABLE WHEN A RUN UUO
; FAILS.
PUSHJ P,KILHSH## ;KILL THE HISEG IF NOT SAVE
MOVEI T2,JS.RUU ;CLEAR RUN FLAG
ANDCAM T2,JBTSTS##(J) ; SO FILSER STOPS ITS CHECKS
MOVE T2,JOBPD1##(R) ;GET FIRST PC ON PD LIST
TLNN T2,USRMOD ;IS IT IN USER MODE(IE USER UUO)?
JRST SGRLE1 ;NO, MUST BE MONITOR COMMAND OR CALLER OVERLAYED
; RELEASE DEVICE, FIND TTY, AND RETURN TO CALLER
HRR M,T2 ;ADDRESS OF RETURN AFTER RUN OR GETSEG UUO
TRNN M,777760 ;FROM AC'S?
JRST SGRLE1 ;YES - TYPE MESSAGE
PUSHJ P,GETWRD## ;GET ERROR RETURN WORD FROM RUN OR GETSEG UUO
MOVSI T1,(HALT)
HLRZ T2,T1 ;GET OP CODE
CAIN T2,(HALT) ;IS LH HALT?
JRST SGRLE1 ;YES, RELEASE DEVICE,FIND TTY, AND RETURN TO CALLER
SKIPE USRJDA## ;DO NOT RELEASE CHANNEL 0 IF NOT INITED YET
; UUO HANDLER DOES NOT ALLOW THIS FROM EXEC MODE
RELEAS 0, ;RELEASE DEVICE(IF INITED)
PUSHJ P,CLRASA ;CLEAR EXEC MODE UUO FLAG
HRR M,JOBPD3##(R) ;NO, AC NUMBER OF RUN OR GETSEG UUO
POP P,T1 ;RESTORE ERROR CODE
PUSHJ P,PUTWDU## ;STORE ERROR NUMBER IN USER AC
PUSH P,JOBPD1##(R) ;PUT RETURN ON END OF PDLIST
JRST USRXIT## ;AND RETURN TO USER TO HANDLE ERROR
SGRLE1: POP P,T1 ;REMOVE ERROR CODE FROM LIST
IFN FTKI10!FTKL10,<
MOVSI T1,.JDAT ;SAVUAC WILL STORE OVER
EXCTXU <BLT T1,17> ; SHADOW ACS, SO SET USERS ACS
>
SGRLE2: PUSHJ P,SGREL ;RELEASE DEVICE AND FIND TTY
PUSHJ P,TTYFUW## ;MAKE SURE ATTACHED FOR ERROR MESSAGES
PUSHJ P,TSETBI## ;CLEAR TYPE AHEAD
SETZM JBTPRG##(J) ;CLEAR NAME SINCE LOST
PJSP T1,CONMES ;PRINT ? ON SAME LINE AS ERROR MSG,
;FOR BATCH AND SCRIPT, RETURN TO CALLER
; WHO WILL PRINT REST OF ERROR MESSAGE AND STOP JOB
ASCIZ /
?/
$LIT
COMEND: END ;END OF COMCON