Google
 

Trailing-Edge - PDP-10 Archives - BB-AE97C-BM - sources/keychr.bli
There are 10 other files named keychr.bli in the archive. Click here to see a list.
 %TITLE 'KEYCHR - get next command character'
MODULE KEYCHR (				! Get next command character
		IDENT = '3-003'			! File: KEYCHR.BLI Edit: CJG3003
		) =
BEGIN
!
!			  COPYRIGHT (c) 1981, 1985 BY
!	      DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
!		ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND  COPIED
! ONLY  IN  ACCORDANCE  WITH  THE  TERMS  OF  SUCH  LICENSE AND WITH THE
! INCLUSION OF THE ABOVE COPYRIGHT NOTICE.  THIS SOFTWARE OR  ANY  OTHER
! COPIES  THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
! OTHER PERSON.  NO TITLE TO AND OWNERSHIP OF  THE  SOFTWARE  IS  HEREBY
! TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE  WITHOUT  NOTICE
! AND  SHOULD  NOT  BE  CONSTRUED  AS  A COMMITMENT BY DIGITAL EQUIPMENT
! CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR  RELIABILITY  OF  ITS
! SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
!

!++
! FACILITY:	EDT -- The DEC Standard Editor
!
! ABSTRACT:
!
!	Get next command character.
!
! ENVIRONMENT:	Runs at any access mode - AST reentrant
!
! AUTHOR: Bob Kushlis, CREATION DATE: April 7, 1979
!
! MODIFIED BY:
!
! 1-001	- Original.  DJS 24-Feb-1981.  This module was created by
!	extracting routine EDT$$NXT_CMDCH  from module KEYTRAN.
! 1-002	- Regularize headers.  JBS 06-Mar-1981
! 1-003 - Add a check for repeat counts allowed or not.  STS 26-Aug-1981
! 1-004 - Fixed problem with norepeat so it doesn't insert number.
!		STS 27-Aug-1981
! 1-005	- Add return value for end of journal file.  JBS 02-Oct-1981
! 1-006 - Don't pass values of keypad except arrow keys. STS 15-Apr-1982
! 1-007 - Accept a flag indicating validity of repeat counts. STS 16-Jun-1982
! 1-008 - Remove reference to TI_STARTECHO.  SMB 22-Jun-1982
! 1-009	- Change numeric test.  JBS 19-Jul-1982
! 1-010 - Don't ring bell if quiet set. STS 09-Aug-1982
! 1-011	- New implementation of defined keys.  JBS 13-Aug-1982
! 1-012	- Don't suppress all keys in NOKEYPAD mode.  JBS 16-Aug-1982
! 1-013	- Fix up norepeat case.  JBS 16-Aug-1982
! 1-014	- Allow for 8-bit keyboards.  JBS 17-Aug-1982
! 1-015	- Add SS3 for 8-bit keyboards.  JBS 20-Aug-1982
! 1-016	- Erase the message line after the first keystroke, if it has
!	   a message on it.  JBS 06-Oct-1982
! 1-017	- Output the format buffer just before waiting for input, in case
!	   there is anything in it.  JBS 07-Oct-1982
! 1-018	- Don't clear the message line until an entire key sequence has been read.
!	   JBS 09-Oct-1982
! 1-019	- Output the format buffer in another case of waiting for input.  JBS 09-Oct-1982
! 1-020	- Change the call to EDT$$TST_KEYDEF.  JBS 14-Dec-1982
! 1-021	- Complete the implementation of 8-bit keyboards.  JBS 20-Jan-1983
! 1-022	- Add a conditional for VT220 support.  JBS 11-Feb-1983
! 3-001 - Update from V3 sources.  GB 18-May-1983
! 3-002 - Remove VT220 conditionals. CJG 25-Nov-1983
! 3-003 - Call EDT$$STORE_FMTCH directly. CJG 5-Jan-1984
!--
%SBTTL 'Declarations'
!
! TABLE OF CONTENTS:
!

REQUIRE 'EDTSRC:TRAROUNAM';

FORWARD ROUTINE
    EDT$$NXT_CMDCH;

!
! INCLUDE FILES:
!

REQUIRE 'EDTSRC:EDTREQ';

LIBRARY 'EDTSRC:KEYPADDEF';

LIBRARY 'EDTSRC:TRANSLATE';

!
! MACROS:
!
!	NONE
!
! EQUATED SYMBOLS:
!
!	NONE
!
! OWN STORAGE:
!
!	NONE
!
! EXTERNAL REFERENCES:
!
!	In the routine
%SBTTL 'EDT$$NXT_CMDCH  - get next command character'

GLOBAL ROUTINE EDT$$NXT_CMDCH (			! Get next command character
    C, 						! Place to store the character
    REPEAT					! Accept repeat counts
    ) =

!++
! FUNCTIONAL DESCRIPTION:
!
!	Get the next command character.  Keypad keys are converted to their
!	numeric equivalent and the functions of GOLD are handled here.
!
! FORMAL PARAMETERS:
!
!  C			The address of a fullword to receive the character.
!
!  REPEAT		Flag indicating whether to accept repeat counts.
!
! IMPLICIT INPUTS:
!
!	CMD_BUF
! 	KPAD
!	CMD_PTR
!	RPT
!	CMD_END
!	MSGFLG
!
! IMPLICIT OUTPUTS:
!
!	CMD_PTR
!
! ROUTINE VALUE:
!
!	0 = control U typed, no command.
!	1 = a command key was typed.
!	2 = end of journal file.
!
! SIDE EFFECTS:
!
!	NONE
!
!--

    BEGIN

    EXTERNAL ROUTINE
	EDT$$SC_REVID,			! Turn on reverse video
	EDT$$PUT_CMDCH : NOVALUE,	! Put a character in the command buffer
	EDT$$TRN_KPADK,			! Read an escape sequence
	EDT$$TI_INPCH,
	EDT$$TI_DELK,
	EDT$$TI_ECHOCH,
	EDT$$ERA_MSGLN,			! Erase the message lines
	EDT$$STORE_FMTCH,		! Store a character
	EDT$$TST_KEYDEF,		! Test a key to see if it is defined as a particular string
	EDT$$OUT_FMTBUF;		! Output the format buffer, if it is non-empty

    EXTERNAL
	MSGFLG,				! 1 = there is text on the message line
	QUIET,				! quiet flag
	CMD_BUF,			! Command buffer
	CMD_PTR,			! Pointer to next char in command buffer
	KPAD,				! in keypad mode?
	RPT,				! Flag for repeat counts
	CMD_END,			! Pointer to end of info in command buffer
	CHAR_INFO : BLOCKVECTOR [256, 1];	! Information about characters

    LOCAL
	SAVE_POINT,			! Starting CMD_PTR .
	MY_C;

    SAVE_POINT = .CMD_PTR;
!+
! Make sure the user sees anything which might be in the format buffer.
!-
    EDT$$OUT_FMTBUF ();
!+
! Get a character.
!-

    IF (EDT$$TI_INPCH (MY_C) EQL 0) THEN RETURN (2);

!+
! If the character is an escape, CSI or SS3, then look for a keypad sequence.
!-

    IF .CHAR_INFO [.MY_C, CI_ESC]
    THEN
	BEGIN

!+
! Translate keypad character.
!-

	IF (EDT$$TRN_KPADK (MY_C) EQL 0) THEN RETURN (2);

!+
! If there is any text on the message line, erase it, since the user
! has now had an opportunity to read it.
!-

	IF (.MSGFLG NEQ 0) THEN EDT$$ERA_MSGLN ();

	IF ( NOT .KPAD)
	THEN
	    BEGIN

	    IF ((.MY_C EQL K_UP) OR (.MY_C EQL K_DOWN) OR (.MY_C EQL K_RIGHT) OR (.MY_C EQL K_LEFT))
	    THEN
		.C = .MY_C
	    ELSE
		.C = K_PF1;

	    RETURN (1);
	    END;

	END;

!+
! If the key is defined as GOLD, handle it here.
!-

    WHILE EDT$$TST_KEYDEF (.MY_C, UPLIT ('GOLD'), 4, 0) DO
	BEGIN
!+
! Look at the next character.  It should be either a digit, a sign
! or a letter.
!-
	EDT$$OUT_FMTBUF ();

	IF (EDT$$TI_INPCH (MY_C) EQL 0) THEN RETURN (2);

	EDT$$SC_REVID ();

	IF ((.CHAR_INFO [.MY_C, CI_DIG] OR (.MY_C EQL %C'-')) AND .REPEAT)
	THEN
	    BEGIN

!+
! Start of a repeat count.  If this was not the first key pressed
! then re-start the count by clearing the buffer back to the
! point where we started.
!-

	    IF (.RPT EQL 0)
	    THEN
		BEGIN

		IF ( NOT .QUIET) THEN EDT$$STORE_FMTCH (7);

		EDT$$OUT_FMTBUF ();

		IF (EDT$$TI_INPCH (MY_C) EQL 0) THEN RETURN (2);

		IF .CHAR_INFO [.MY_C, CI_ESC]
		THEN
		    BEGIN

		    IF (EDT$$TRN_KPADK (MY_C) EQL 0) THEN RETURN (2);

		    END;

		END
	    ELSE
		BEGIN

		IF CH$PTR_NEQ (.CMD_PTR, .SAVE_POINT)
		THEN
		    BEGIN
		    CMD_PTR = .SAVE_POINT;
		    EDT$$ERA_MSGLN ();
		    END;

!+
! Now continue reading and echoing characters until a non-digit is found.
!-

		DO
		    BEGIN
		    EDT$$TI_ECHOCH (.MY_C);
		    EDT$$PUT_CMDCH (.MY_C, 0);
		    EDT$$OUT_FMTBUF ();

		    IF (EDT$$TI_INPCH (MY_C) EQL 0) THEN RETURN (2);

!+
! Look for delete and CTRL/U
!-

		    WHILE (.MY_C EQL ASC_K_DEL) DO
			BEGIN

			IF CH$PTR_NEQ (.CMD_PTR, .SAVE_POINT)
			THEN
			    BEGIN
			    CMD_PTR = CH$PLUS (.CMD_PTR, -1);
			    EDT$$TI_DELK (CH$RCHAR (.CMD_PTR));
			    END;

			EDT$$OUT_FMTBUF ();

			IF (EDT$$TI_INPCH (MY_C) EQL 0) THEN RETURN (2);

			END;

		    IF (.MY_C EQL ASC_K_CTRL_U)
		    THEN
			BEGIN
			EDT$$ERA_MSGLN ();
			CMD_END = CH$PTR (CMD_BUF,, BYTE_SIZE);
			RETURN (0);
			END;

		    END

		UNTIL (NOT .CHAR_INFO [.MY_C, CI_DIG]);

!+
! If the repeat sequence was ended by an escape, CSI or SS3 then get the key.
!-

		    IF .CHAR_INFO [.MY_C, CI_ESC]
		    THEN
			BEGIN

			IF (EDT$$TRN_KPADK (MY_C) EQL 0) THEN RETURN (2);

			END;

		    END

		END
	    ELSE

		IF .CHAR_INFO [.MY_C, CI_ESC]
		THEN

!+
! Here if we had gold followed by an escape, CSI or SS3.
! Translate the sequence and use the golded function of the key.
!-
		    BEGIN

		    IF (EDT$$TRN_KPADK (MY_C) EQL 0) THEN RETURN (2);

		    MY_C = .MY_C + K_GOLD_BASE;
		    END
		ELSE
		    BEGIN
!+
! Here if we had gold followed by a character from the main keyboard.
!-

		    IF .CHAR_INFO [.MY_C, CI_LC]	! Lower case
		    THEN
			MY_C = .MY_C - %C'a' + %C'A';	! Force to upper

		    MY_C = .MY_C + K_GOLD_BASE;
		    END;

	END;

!+
! Return the coded character.
!-

    .C = .MY_C;
    RETURN (1);
    END;					! of routine EDT$$NXT_CMDCH

!<BLF/PAGE>
END						! of module EDT$$KEYCHR

ELUDOM