Trailing-Edge
-
PDP-10 Archives
-
BB-D480C-SB_1981
-
forddt.doc
There is 1 other file named forddt.doc in the archive. Click here to see a list.
FORDDT-10 -- Changes from V5A(101) to V6(154)
December 1981
COPYRIGHT (C) 1980,1981 BY
DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
TRANSFERRED.
THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
CORPORATION.
DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
FDT6.DOC - FORDDT-10 Page 2
FORDDT-10 -- Changes from V5A(101) to V6(154)
December 1981
1.0 SUMMARY
FORDDT is an interactive FORTRAN debugger designed for use with
FORTRAN version 4 or later. It provides the user with the ability to
set pauses (i.e. breakpoints) and display and change the contents of
variables, arrays, etc., with FORTRAN-like commands. In addition to
these features, when the FORTRAN program is compiled with the FORTRAN
/DEBUG switch, the user is able to trace the program line by line,
display and modify FORMAT statements, and have array dimension
information automatically provided to FORDDT.
Version 6 is Version 5A fixed by edits 102 to 154 inclusive.
1.1 Bibliography
FORTRAN-10 Programmer's Reference Manual (AA-0944E-TB)
1.2 Monitors
FORDDT will run on any Release 7.00 or 7.01 monitor.
1.3 Related System Software
The following system software (or later) is required to run FORTRAN
programs loaded with FORDDT:
FORLIB 6
FOROTS 6
FORTRA 6
LINK 4A
2.0 EXTERNAL CHANGES
1. The use of logicals, i.e. .TRUE. and .FALSE. have been
implemented for use in the PAUSE, ACCEPT, MODE and TYPE
statements. The new mode switch to specify logical is "L".
"L" was previously used to specify long (ie. two word)
ASCII, RASCII and OCTAL values in the ACCEPT and MODE
commands. This switch has been changed to "B", mnemonic for
"BIG".
2. The text FORDDT.HLP will now be typed when FORDDT's HELP
command is given.
3. DDT will now be loaded into memory the first time the DDT
FDT6.DOC - FORDDT-10 Page 3
command is given from FORDDT (unless DDT is already loaded).
The user will then be put into DDT. To exit from DDT back
into FORDDT the command '%FDDT$G', where $ is an alt-mode,
should be given.
4. FORDDT may now be CALLed directly from a user FORTRAN
program. The appropriate statement is 'CALL FORDDT', where
no arguments are required. FORDDT must be loaded and
initialized before a CALL to FORDDT is made. This is done by
starting the program in debug mode before the first call.
All normal FORDDT commands are allowed. A CONTINUE will
resume normal execution of the user program (this is similar
to a RETURN from a subroutine).
NOTE: Since FORDDT is now defined as a global symbol,
users should be careful if they decide to use the label
FORDDT as a program, subroutine or function name.
3.0 KNOWN BUGS AND DEFICIENCIES
1. FORDDT is very sensitive to spaces in command lines. If a
parameter is to be specified for a command, the command
identifier must be terminated by a space: NEXT/L will evoke
a syntax error, while NEXT /L will not. Note also that if a
parameter is not specified the command identifier must not be
followed by a blank: DIMENSION<SPACE><CR><LF> will evoke a
syntax error message.
2. FORDDT does not support overlays.
4.0 INSTALLATION INSTRUCTIONS
See the file FORTRA.INS for information regarding installation.
5.0 INTERNAL CHANGES
The following is a list of all of the edits made to Version 5A(101) in
producing version 6.
102 SPR-11018 Prevent loop if symbol table has been BLT'ed to
zero, as can happen with an overlaid program.
103 QAR-2182 Put "SEARCH MONSYM" from edit 100 under "IFN TOPS20"
and move it to after the definition of TOPS20.
104 SPR-24427 Prevent illegal memory reference if symbol table
ends exactly at the end of legal memory.
105 SPR-11395 Handle TYPE with multiple arguments. FORDDT was
FDT6.DOC - FORDDT-10 Page 4
blowing up if first arg was formal array, because
formal array flag never got cleared.
106 SPR-25207 Change FDTNAR not an array to FDTNAA. This Avoids
Conflict With FDTNAR not after REENTER.
107 SPR-NONE Fix symbol search termination test (off by 2).
110 SPR-25384 Fix type of a formal array in small programs.
111 SPR-11839 ACCEPT statement eats first character of input
value.
112 SPR-27201 Make use of typeouts and mode control more
consistant.
113 SPR-12316 Restrict use of double precision in conditionals.
114 SPR-NONE Clean up some TOPS-20 code: implement nontrivial
DDT command, fix HALTF when COMND JSYS gives an
error return, remove some redundant code in LISTEN.
115 SPR-NONE Get VMDDT on TOPS-10 when DDT isn't loaded with
prog.
116 SPR-28581 Implement use of logicals (.TRUE. and .FALSE.) in
PAUSE conditionals.
117 SPR-NONE Make error messages upper and lower case.
120 SPR-NONE Implement logicals into ACCEPT, MODE and TYPE
statements using the flag "/L". "/L" was previously
used to specify long (ie. two word) ASCII, RASCII
and OCTAL values in the ACCEPT and MODE commands.
This switch has been changed to "/B", mnemonic for
"BIG".
121 SPR-NONE Fix -20 code to clear bad lines properly.
122 SPR-NONE Set .JBDDT when VMDDT is pulled in to prevent
overflow warnings from FOROTS.
123 SPR-NONE Prevent infinite loop on TOPS-20 if .JBHSO is 0 but
.JBHRL isn't.
124 SPR-NONE Fix logical TYPEing so that all positive values are
.FALSE. and all negative values are .TRUE..
125 SPR-NONE Add a new entry point (%FDDT) to be used when
returning from DDT in place of .F10 (which will
still work).
126 SPR-NONE Add ?FDT prefix to COMND JSYS error messages.
127 SPR-NONE Call FOROTS routine DEC. to interpret real,
FDT6.DOC - FORDDT-10 Page 5
integer, complex, and double precision numbers
instead of IN..
130 SPR-NONE Call HELPER to print out FORDDT.HLP when the HELP
command is issued.
131 SPR-NONE Search universal FDDT20 to define TOPS20 instead of
defining it within FORDDT.
132 SPR-29363 Fix various problems that occur when core file is
filled during GROUP and TYPE commands.
133 SPR-29261 Fix up error handling when reading program name.
Use command JSYS when reading program name on -20.
134 SPR-NONE PAUSE sometimes hangs if a line terminator is typed
in an inappropriate place. Fix it.
135 SPR-NONE When looking up symbol in symbol table, make sure we
compare the whole symbol and not just the right
half-word
136 SPR-NONE PAUSE command doesn't allow comments in all places.
fix it.
137 SPR-NONE Add G-floating capability for input/output. Use of
G-floating is determined at initialization time by
the presence of the symbol "..GFL.". If ..GFL. is
missing, default to D-floating. If ..GFL. is
present, use G-floating.
140 SPR-NONE Fix COMND trailing space problem. On the -20, the
COMND JSYS is used to parse the first keyword.
COMND supplies an extra space which makes FORDDT
think that there are arguments following the
keyword. This bug fix edits the COMND text buffer
before doing a RSCAN JSYS and passing it to FORDDT's
parsing code. It appropiately skips over comments.
141 SPR-NONE Fix G-floating bug. Symbol ..GFL. was changed to a
deleted output global symbol, breaking FORDDT's
symbol lookup routine. One line patch at: EVAL1.
Replace existing line with MOVSI R,GLOBAL!DELO.
142 SPR-NONE Use the new FOROTS routine to get high-segment
symbol table pointer. This is in case the high
segment is protected. Make sure HELPER gets loaded
into the low-seg and that we look for it on REL: on
TOPS-10. Fix up some error messages. Relocate
univeral searches.
143 SPR-NONE Assume that FOROTS and FORLIB are loaded from now
on. So remove almost all the SKIPIF macro calls.
This also fixes the problem of GHSSYP recursively
calling itself.
FDT6.DOC - FORDDT-10 Page 6
144 QAR-5031 Change output format to suppress FOROTS's CR, as
FORDDT types a CR also. Also remove FORBUF, which
is now unnecessary.
145 SPR-NONE Make FORDDT the entry point for FORTRAN users who
wish to call FORDDT as an error routine. SFDDT is
the new entry point for initializing FORDDT
(including reseting all files opened by FOROTS).
SFDDT replaces the old FORDDT symbol. Replace
FORBUF.
NOTE: Since FORDDT is now a global symbol, users
should be careful if they decide to use the label
FORDDT as a program, subroutine or function name.
146 SPR-NONE New calling sequence for FOROP.
147 SPR-NONE Fix up help code so that we get FORDDT.HLP ourselves
instead of using HELPER. This way FOROTS' data will
not get stomped on. Conditionalize out the old code
for the time being. Redefine AC0 to be accumulator
0 and redefine the memory location previously
defined as AC0 to be SAVACS. Also, remove universal
file FDDT20.
150 SPR-NONE Change so that all JSYSs consistently end with a
percent sign (%). Also clean up the listing a bit
(e.g., change PAGE pseudo-ops to form-feeds, delete
definitions already defined in UUOSYM, etc.).
151 SPR-16084 FORDDT always flags lowercase on ASCII typeout. On
TOPS-20, don't do any flagging--the monitor and user
commands will do it. On TOPS10, if the terminal is
set to uppercase, flag the lowercase character; if
it is set to lowercase, don't do any flagging
(default is no flagging).
152 Q20-1675 Prevent FORDDT from getting arithmetic overflows in
its symbol offset calculation.
153 SPR-NONE Report what is assembling (TOPS10 or TOPS20). Also
PURGE some symbols which my conflict with users'
subroutine names.
154 SPR-NONE Move setting .JBREN to before the call to RESET.
Use a different mechanism for detecting multiple
REENTER entries.
6.0 SUGGESTIONS
None.
FDT6.DOC - FORDDT-10 Page 7
[End Of FDT6.DOC]