!
!  This file, when executed by the configurator on a terminal server
!  image, will restore that image to its original, unaltered  state.
!  However, any predefined (local) services will not be removed.
!
!  In order to clear any ports for which a preferred or a  dedicated
!  service has been defined, all ports are  temporarily  defined  to
!  have a preferred service of TEMP.  Once all ports are in the same
!  state, they can all be cleared (without generating error messages
!  on those ports that did not have a preferred/dedicated service).
!
!  Likewise, in the case of the multiplexor ports, setting  autobaud
!  disabled prior to restoring the default speed of 9600 is done  to
!  suppress a message warning that autobaud is being disabled.
!  
!
!	Default DEFINE SERVER SERVICE commands:
!
DEFINE SERVER SERVICE GROUPS ALL DISABLED
DEFINE SERVER SERVICE GROUP 0 ENABLED
!
!	Default DEFINE SERVER commands:
!
DEFINE SERVER NAME
DEFINE SERVER NUMBER 0
DEFINE SERVER IDENTIFICATION
DEFINE SERVER BACKUP HOSTS
DEFINE SERVER LINE FREQUENCY 60
DEFINE SERVER LOGIN PASSWORD ACCESS
DEFINE SERVER PRIVILEGED PASSWORD SYSTEM
DEFINE SERVER MAINTENANCE PASSWORD 0000000000000000
!
DEFINE SERVER GROUPS ALL DISABLED
DEFINE SERVER GROUP 0 ENABLED
!
DEFINE SERVER BROADCAST ENABLED, LOCK ENABLED, ANNOUNCEMENTS ENABLED
DEFINE SERVER CIRCUIT TIMER 80, KEEPALIVE TIMER 12, PASSWORD LIMIT 3
DEFINE SERVER NODE LIMIT 32, RETRANSMIT LIMIT 10, SESSION LIMIT NONE
DEFINE SERVER QUEUE LIMIT 16, INACTIVITY TIMER 30, MULTICAST TIMER 60
!
!	Default DEFINE PORT characteristics:
!
!    Do the special case of the console first.
!
DEFINE PORT 0  NAME CONSOLE
DEFINE PORT 0  SESSION LIMIT NONE
DEFINE PORT 0  LOCAL SWITCH ~
DEFINE PORT 0  FORWARD SWITCH NONE
DEFINE PORT 0  GROUPS ALL ENABLED
DEFINE PORT 0  PREFERRED TEMP
DEFINE PORT 0  PREFERRED NONE
!
DEFINE PORT 0  ACCESS LOCAL,         AUTOBAUD DISABLED,  AUTOCONNECT DISABLED
DEFINE PORT 0  AUTOPROMPT ENABLED,   BREAK DISABLED,     BROADCAST ENABLED
DEFINE PORT 0  FLOW CONTROL ENABLED, INTERRUPT DISABLED, MODEM DISABLED
DEFINE PORT 0  PASSWORD DISABLED,    SECURITY DISABLED,  TYPE SOFTCOPY
DEFINE PORT 0  VERIFICATION ENABLED
!
!    Now, set the defaults for the multiplexor lines.
!
DEFINE PORT ALL  NAME NONE
DEFINE PORT ALL  SESSION LIMIT NONE
DEFINE PORT ALL  LOCAL SWITCH NONE
DEFINE PORT ALL  FORWARD SWITCH NONE
DEFINE PORT ALL  GROUPS ALL ENABLED
DEFINE PORT ALL  PREFERRED TEMP
DEFINE PORT ALL  PREFERRED NONE
!                                 
DEFINE PORT ALL  ACCESS LOCAL,         AUTOBAUD DISABLED,  AUTOCONNECT DISABLED
DEFINE PORT ALL  AUTOPROMPT ENABLED,   BREAK LOCAL,        BROADCAST ENABLED
DEFINE PORT ALL  FLOW CONTROL ENABLED, INTERRUPT DISABLED, MODEM DISABLED
DEFINE PORT ALL  PASSWORD DISABLED,    SECURITY DISABLED,  TYPE SOFTCOPY
DEFINE PORT ALL  VERIFICATION ENABLED, CHARACTER SIZE 8,   PARITY NONE
DEFINE PORT ALL  SPEED 9600,           AUTOBAUD ENABLED,   INACTIVITY DISABLED
!
!	End of defaults command file
!