Trailing-Edge
-
PDP-10 Archives
-
BB-F493Z-DD_1986
-
10,7/cojob.rnd
There are 3 other files named cojob.rnd in the archive. Click here to see a list.
.FLAG CAPITALIZE
.fl CAPITALIZE {
.fl index }
.FLAG INDEX
.lm 5;.rm 80;.ps 60,80;.VARIABLE MPB,+,-
.title#####MIC COJOBS - CONCURRENT JOB FACILITY
.ST#####University of York - April 1983
.nap
.s12
.centre; UNIVERSITY OF YORK
.s3
.centre; MIC - COJOBS
.s2
.centre; Concurrent JOB facility
.s3
.centre; USERS' GUIDE EDITION 3.1
.IF MPB
.centre; (for MPB systems)
.ENDIF MPB
.IFNOT MPB
.centre; (for GALAXY systems)
.ENDIF MPB
.s2
.centre; April 1983
.s5
.centre; This guide relects features of version 11C(1223) of MIC.
.s2
.pg;.nf;.s4
.center; Contents
.s2
Section Contents page
.LIST
.LE;Introduction
.LE;Log Specification
.LE;COJOB switches
.LIST
.LE;TIME switch
.le;TAG switch
.le;[NO]OPTION switch
.le;[NO]LOPTION switch
.IF MPB
.LE;ZQ switch
.LE;VD switch
.ENDIF MPB
.END LIST
.LE;COJOB request (continued from section l)
.LE;COJOB messages
.LE;COJOB control
.LE;COJOB commands
.LE;"IF" extension for COJOB users
.LE;MIC SET command
.END LIST
.s2
Index
.s2
Appendices
.s2
A ERROR MESSAGES
.s2
A.1 COJOB command - fatal errors
A.2 COJOB command - non fatal errors
.s2
Index of Error Codes
.page;.f;.i -4
^&1###Introduction\&
.s
The COJOB facility gives the user the ability to request immediate execution of a MIC macro as a separate job. The COJOB is logged in on a {}PTY by the MIC master process under the same {}PPN as the requestor. Transactions on the PTY are written to the specified log file.
.s
A COJOB request is entered by a command of the form
.s;.nf
_.COJOB LOGSPEC/SWITCHES=<MACRO-SPEC> <ARGUMENTS>
.s
where
.s
{}LOGSPEC is the specification of the MIC log file
(see section 2)
.s
{}SWITCHES control the various COJOB options
(see section 3)
.s
{}MACRO-SPEC is the specification of the MIC command file in the
usual format
(see MIC documentation)
.s
{}ARGUMENTS are the arguments to the MIC command file
(see MIC documentation)
.s
.f
The description of the COJOB request is continued in section 4.
.s3
.I -4
^&2###Log Specification\&
.s
The specification of the log file for a COJOB is of the form
.s
DEV:FILNAM.EXT[PATH]
.s
where any or all of these may be omitted, and a standard default
value used. The standard defaults are
.INDEX Default Logspec
.s;.nf
DEV DSK
FILNAM the same as the macro file
EXT Lnn - where nn is a two digit number
forming a unique filename.ext
PATH the initiator of the COJOBS project
programmer number
.s
Example
.s;.f
To run the macro command file "FRED.MIC" the user could use the
command
.s;.nf
_.COJOB=FRED
.s
and use all defaults.
.TP 5
This is equivalent to using
.s
.IF MPB
_.COJOB DSK:FRED.L00/TIME:60/VD:P/ZQ:0=FRED
.s;COJOB NUL:=MACROFILE
.ENDIF MPB
.IFNOT MPB
_.COJOB DSK:FRED.L00/TIME:60=FRED
.ENDIF MPB
.s;Note:##A convenient way of running a COJOB and producing no log file
is:
.s;COJOB NUL:=MACROFILE
.s3;.I -4
^&3 COJOB switches\&
.INDEX Switches
.s;.f
The switches given in a COJOB control the running of the COJOB and
the disposal of the log file. Currently the switches available are
.s
.nf
TIME Time limit for cojob
TAG Start COJOB at a label
[NO]OPTION select a SWITCH.INI option
[NO]LOPTION select a SWITCH.INI option at LOGIN.
.s;Note:##COJOB switches may be included in a SWITCH.INI line labelled thus:
.s.nf
COJOB /switches
or
COJOB:optionname/switches
if a /OPTION:optionname switch is used.
.IF MPB
VD Disposal of log file
ZQ Degree of queuing at kjob time
.ENDIF MPB
.INDEX {TIME Switch
.s
^&3.1 TIME switch\&
.s;.f
This switch controls the run-time for the COJOB, and has the format
.s;.nf
/TIME:n
.s
where
.s
n is the run-time for the COJOB given in the form
.s
n = s seconds e.g. /TIME:5
n = mm:ss - minutes:seconds e.g. /TIME:3:30
n = hh:mm:ss - hours:minutes:seconds e.g. /TIME:1:30:25
n = sk - s*1000 seconds e.g. /TIME:5k
.s;.f
The default run-time is currently 60 secs, though this may change.
.s;.br
The system operator may also set a maximum value for this switch,
which the user may not exceed. If he attempts to exceed this value
he will receive the message described in Appendix A.2 and his switch
value will be reset to the maximum value.
.s2;^&3.2 TAG Switch\&
.index {TAG Switch
This switch specifies that the COJOB is to start execution at the label
given as argument to the switch.
The format is -
.b; /TAG:labelname
.s2;^&3.3 [NO]OPTION switch\&
.index {[NO]OPTION switch
This is the usual switch that controls the processing of SWITCH.INI entries.
.nt
The COJOB SWITCH.INI line is labelled COJOB.
.en
.s2;^&3.4 [NO]LOPTION switch\&
.index {[NO]LOPTION
This switch controls the option to be selected a COJOB LOGIN, thus the
switch /NOLOPTION would cause the LOGIN switch /NOOPTION to be used.
.s2;.nf
.IF MPB
.INDEX {ZQ Switch
^&3.2 ZQ switch\&
.f;.s
This switch specifies the degree of queuing required for the log
file. This switch has the format
.s
.INDEX Logfile Queuing
/ZQ:n
.s;.nf
where
.INDEX Default queuing
.s
n=0 suppress all normal queuing done at logout
time (default)
.s
n=1 queue the log file only
.s
n=2 queue the log file and all spooled output
(*.LPT,etc)
n=3 queues the log file, spooled output, and *.LST
.s
n=4 queues the log file, spooled output, *.LST, and
any requests deferred to logout time
.s;.f
For further information see the KJOB command in the DECsystem-10
Users' Handbook.
.s2
.INDEX {VD Switch
^&3.3 VD switch\&
.s;.f
This conmmand specifies the disposition of the log file, and has
the format
.INDEX Logfile Disposition
.s
/VD:n
.s;.nf
where
.s
.INDEX Default Disposition
n=D delete the log file after printing
.s
n=P preserve the log file (default)
.s
n=R rename the log file to the queue area and delete
it after printing
.s;.f
For further information see the KJOB command in the DECsystem-10
Operating System Command manual.
.s
.ENDIF MPB
.s2;.i -4;.nf
^&4 COJOB request - contd.\&
.s;.f
If a COJOB request is successful the user will be informed thus
.s
[COJOB <name> (macroname) started, log file is DEV:NAME.EXT[PATH]]
.s
where
.s
<name> is a one letter name assigned to the COJOB for
identification purposes.
.s;(macroname) is the COJOB job name, normally the same as the FILNAME
part of the <macro-spec>.
.s
If a COJOB request is unsuccessful the user will receive
.s
[No COJOBS available]
.s
or an appropriate error message.
.TP 15
.s3;.i -4;.nf
^&5 COJOB messages\&
.INDEX {COJOB messages
.s
.f
When a COJOB finishes its run the user is informed by
.s
[COJOB <name> (macroname) complete]
.s
and a record of what was performed by the COJOB may be found in
the logfile.
.s
Other messages which may be output during the running of the
COJOB are
.s
[COJOB <name> (macroname)[ABORT]]
.index {ABORT
If the user has included a MIC ABORT statement in the command file.
.INDEX {ABORT {ON {ERROR
.s
[COJOB <name> (macroname)[ABORT ON ERROR]]
If an error condition has been detected.
.s
.INDEX {PLEASE
[COJOB <name> (macroname).PLEASE<MESSAGE>]
If a PLEASE command has been included.
.s
.INDEX {BREAK
[COJOB <name> (macroname)[BREAK]]
If a MIC BREAK has been performed.
.br
(To proceed after this message see COJOB control commands)
.s
.INDEX {PROCEED
[COJOB <name> (macroname)[PROCEED]]
If a COJOB has been proceeded after a break.
.s
[COJOB <name> (macroname) waiting ...]
This message is output every two minutes (approx.) after a
MIC BREAK has been performed and the COJOB has not been PROCEEDed
.br
(N.B. A similar comment appears in the log file.)
.INDEX Waiting
.s
[COJOB <name> (macroname)[?time limit exceeded]]
.f
This message is output when a COJOB has run out of time. After
this message has been output the COJOB is allocated 10% of its
original time and allowed to proceed as if any error had occurred.
.s
[COJOB <name> (message) - Enter Parameter B]
.br;The message reflects the prompt which the use has used in a MIC
INPUT statement. The COJOB suspends until the user replies using a
TYPE or ENTER command.
.s
These messages all have a correspondence with normal MIC messages
and in fact the normal MIC message will normally appear in the log file.
.s2
Note
.s
1###If a COJOB owner logs off while his COJOB is still running
no more messages will be sent to the owner's TTY by the COJOB.
Instead the following message will be inserted in his log file
.s
[COJOB owner not available - continuing]
.s
and execution of the COJOB will continue.
.s
Also, should the owner log out the COJOB will be prevented from
entering "break" mode.
.s
2###Similarly, if a COJOB owner logs off while his COJOB is in
BREAK mode, this will be detected at the "Waiting ..." stage and
the COJOB will be continued as in note 1.
.s3;.i -4;.nf
.TP 9
^&6 COJOB control\&
.INDEX {COJOB control
.s
The COJOB owner (or the operator) may issue control commands to a
COJOB using the following command string
.s
_.COJOB <name>-<CONTROL-COMMAND>
.s
where
.s;.nf
<name> is the COJOB as section 5.
.s
<control-command> is one of the following
.s
WHAT - to receive information of the status of the
COJOB.
.INDEX {WHAT command
.s
CANCEL - to kill the COJOB i.e. cause it to log out.
.INDEX }CANCEL command
.s
BREAK - to cause the COJOB to enter break mode.
.INDEX }BREAK command
(cf. MIC BREAK and _^B for normal MIC's)
.s
PROCEED - to cause a COJOB to continue after a break.
.INDEX }PROCEED command
(cf. MIC PROCEED and _^P)
.s
ABORT - to stop the currently running mic process.
.INDEX }ABORT command
(cf. MIC ABORT and _^A)
.s
PLEASE message - to display the "message" on the COJOB
.INDEX }PLEASE command
owner's terminal.
.s;.f
If an invalid <CONTROL-COMMAND> has been given, or the user has
tried to issue a <CONTROL-COMMAND> to a COJOB that does not belong
to him the message
.s;.nf
%CONTROL COMMAND "<CONTROL-COMMAND>" NOT VALID FOR COJOB <NAME>
.s
will be output.
.s2;.nf
Note
.s;.f
1###<CONTROL-COMMANDS> are not valid when a cojob is in the
process of logging out or logging in.
.s
2###The system operator may give any of the <CONTROL-COMMANDS>
to any COJOB, even those not owned by him.
.TP 11
.s3;.i -4;.nf
^&7 COJOB commands\&
.INDEX {COJOB commands
.s;.f
As well as the COJOB control commands, a COJOB owner may issue
any other MIC command on behalf of the COJOB.
Example
.s;.nf
_.COJOB A-LET C="ABCDE"
.s
sets the parameter C in the COJOB to contain the string "ABCDE"
.s;.f
Similarly, most other MIC commands may be given to a COJOB.
.s3;.nf;.i -4
.TP 10
^&8 IF extensions for the COJOB user\&
.INDEX {IF command
.s;.f
The IF command has been extended to provide a means whereby a MIC
macro command may determine if it is a COJOB or not.
.s
The command has the format
.s
_.IF (COJOB).ANY MONITOR OR MIC COMMAND
.s
and the interpretation of the command is the same as in the
normal IF command. (See MIC documentation.)
.s3;.i -4
^&9###MIC SET command\&
.INDEX {MIC {SET command
.s
There is a separate set of MIC SET commands whose action applies
only to COJOBS.
.s
This command is described in the MIC documentation.
.s;.nf
The command format is
.s
_.MIC SET <no> <action>
.s
where the available actions are
.s
_.MIC SET NO TIMESTAMP
Turns off timestamping of the log file.
.s
_.MIC SET TIMESTAMP
Turns timestamping on.
.s
_.MIC SET LOGNONE
Stops MIC logging COJOB activity.
.s
_.MIC SET LOGALL
Restarts logging (and timestamping)
.s;.f
.TP 10
Note
.s
1###the two commands
.s
_.MIC SET NO LOGNONE
.br
_.MIC SET NO LOGALL
.s
do have the expected effect, but are normally not necessary.
.s;.nf
2 the default settings are
.s
_.MIC SET TIMESTAMP
.br
_.MIC SET LOGALL
.Page
.do index
.number index
.Page
.appendix &Error Messages\&
COJOB command
.s;.f
As well as all the error messages which may be generated during
a "/" command, the following are specific to the COJOB command.
.s
A.1###Fatal error messages
.s2
.INDEX {MICCJN
?MICCJN COJOBS not available at this time
.br
The system operator has said that COJOBs are not available for
remote users.
.s
.INDEX {MICCLD
?MICCLD cannot INIT log device
.br
The logging device specified by the user is in error.
.s
.INDEX {MICCLF
?MICCLF cannot LOOKUP log file
.br
A LOOKUP UUO performed on the user's specified log file failed for
some reason other than the file not existing.
.s
.INDEX {MICELF
?MICELF cannot ENTER log file
.br
The specified log file could not be created.
.s
.INDEX {MICELS
?MICELS error in log file spec
.br
The specification of the log file given by a user was invalid.
Normally, this error is due to incorrect syntax.
.s
.INDEX {MICECR
?MICECR error in COJOB request
.br
A syntax error was detected in the "COJOB" command, most probably
in one of the user's switches.
.s;?MICNCA No COJOBS available
.br;All the COJOB slots are in use
.Index {MICNCA
.s2
A.2###Non-fatal error messages
.s
.INDEX {MICSAE
%MICSAE switch value exceeds maximum value
.br
A switch (e.g. the TIME switch) has an argument larger than some
preset maximum value (defined by the system). The user's argument
is replaced by the mimimum value.
.s
Note
.s
Some switches e.g. the TIME switch, may have their limit value
changed by the operator dependant on system loading.
.PAGE
.DO INDEX
.NUMBER INDEX