Trailing-Edge
-
PDP-10 Archives
-
BB-F493Z-DD_1986
-
10,7/dcnmcb/datml.m11
There are 15 other files named datml.m11 in the archive. Click here to see a list.
.TITLE MCB data base building macros
.IDENT /003050/
.ENABL LC
;
;
; COPYRIGHT (c) 1980, 1981, 1982
; DIGITAL EQUIPMENT CORPORATION
;
; This software is furnished under a license and may be used
; and copied only in accordance with the terms of such license
; and with the inclusion of the above copyright notice. This
; software or any other copies thereof may not be provided or
; otherwise made available to any other person. No title to
; and ownership of the software is hereby transferred.
;
; The information in this software is subject to change
; without notice and should not be construed as a commitment
; by DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL assumes no responsibility for the use or reliability
; of its software on equipment which is not supplied by
; DIGITAL.
;
;++
; Macros for creating MCB data base
;
; The data base binary file is built the same way as a
; process, except that the partition base is specified as
; zero. It has the following structure:
;
; +-----------------------+
; ! Identification !
; +-----------------------+
; ! Primary load block !
; +-----------------------+
; ! Secondary load blocks !
; +- and -+
; ! Data blocks !
; +-----------------------+
;
; The identification block provides verification that the
; file is indeed a data base binary file, and includes the
; version of the MCB macro set that the file was created
; with.
;
; The primary load block contains loader commands which
; define the first allocation for either a single or
; multiplex data base, and points to secondary load blocks
; for the formatting of this memory area.
;
; Secondary load blocks describe the data to insert into
; allocated memory areas and optionally do further memory
; allocations (which could be formatted by load blocks).
;
; Data blocks are refered to by load blocks, and contain
; constant text to be copied into the allocated areas.
;
; ------
;
; All allocations can be made either from the DSR which is
; always mapped to the process, or from an unmapped core
; partition which is only accessable by mapping the area
; into APR 6. Primary allocations must correspond to the
; use of the data base, and thus must be from the DSR for
; all cases except for non-driver DLC data bases.
;
; In the descriptions that follow, addresses are relative to
; the beginning of the identification block, and offsets are
; relative to the beginning of the memory block being
; formatted.
;
; If a load block address is zero, the allocated block is
; assumed to be zeroed, and no other data need be loaded
; into it.
;
; ------
;
; Identification block:
;
; +-------------------+
; ! Radix-50 "MCB" !
; +---------+---------+
; ! Minor ! Major !
; +---------+---------+
;
; The major and minor versions will correspond to the "major.minor"
; of the target MCB system.
;
; ------
;
; The load blocks will be composed of loader commands:
;
; +---------+---------+
; ! 0 ! 0 !
; +---------+---------+
;
; Cmd Description
; --- -----------
; 0 End of load block
;
; +---------+---------+
; ! var # ! cmd !
; +---------+---------+
; ! offset into table !
; +-------------------+
;
; Cmd Description
; --- -----------
; 1 Move variable to word
; 2 Move variable to byte
; 3 Add variable to word
; 4 Add variable to byte
;
; +---------+---------+
; ! 0 ! cmd !
; +---------+---------+
; ! offset into table !
; +-------------------+
; ! length !
; +-------------------+
; !data block address !
; +-------------------+
;
; Cmd Description
; --- -----------
; 5 Move text
;
; +---------+---------+
; ! 0 ! cmd !
; +---------+---------+
; ! offset into table !
; +-------------------+
; ! length !
; +-------------------+
; !load block address !
; +-------------------+
;
; Cmd Description
; --- -----------
; 6 Verify offset
;
; +---------+---------+
; ! 0 ! cmd !
; +---------+---------+
; ! offset into table !
; +-------------------+
; !verification offset!
; +-------------------+
;
; Cmd Description
; --- -----------
; 10 Allocate DSR, move address, and load
; 11 Allocate pool, move bias/address, and load
;
; +---------+---------+
; ! var1 ! cmd !
; +---------+---------+
; ! length !
; +-------------------+
; !load block address !
; +-------------------+
;
; Cmd Description
; --- -----------
; 20 Allocate data base from DSR,
; load, and move address to SLTs until
; var1 changes
; 21 Allocate data base from pool,
; load, and move bias/address to SLTs
; until var1 changes
;
; +---------+---------+
; ! var1 ! cmd !
; +---------+---------+
; ! ! var2 !
; +---------+---------+
; ! control length !
; +-------------------+
; !load block address !
; +-------------------+
; ! unit length !
; +-------------------+
; !load block address !
; +-------------------+
;
; Cmd Description
; --- -----------
; 30 Allocate multiplexor data base from DSR
; base on number of units specified by the var2,
; load control table, then repeat:
; load unit table, and move address to SLTs
; until var1 changes.
; 31 Allocate multiplexor data base from pool
; base on number of units specified by the var2,
; load control table, then repeat:
; load unit table, and move bias/address to SLTs
; until var1 changes.
;
; Variables:
;
; Var Description
; --- -----------
; 1 Current table base virtual address
;
; 10 Current line index (from L.LIX)
; 11 Current controller (from L.CTL)
; 12 Current unit (from L.UNT)
; 13 Current tributary (from L.TRB)
;
; 20 Number of system lines
; 21 Number of controllers on device
; 22 Number of units on controller
; 23 Number of tributaries on unit
;
; 30 Controller characteristics
; . (#0 = CSR)
; . (#1 = interrupt vector)
; . (#2 = interrupt priority)
; 37
;
; 40 Unit characteristics
; . (#0 = secondary CSR)
; .
; .
; 47
;
; 50 Tributary characteristics
; . (#0 = Current station address)
; .
; .
; 57
;
;--
;+
; Psect management
;-
;
; Begin a load block psect
;
.MACRO BLK$B
.IRP n,<\$$LVL>
$$L'n = $$BLK
.ENDM
$$LVL = $$LVL+1
$$BLK = $$NXT
$$NXT = $$NXT+1
.IRP n,<\$$BLK>
.PSECT $$B'n
$BB'n = .
.ENDM
DAT$B \$$BLK
.ENDM BLK$B
;
; Terminate a load block psect
;
.MACRO BLK$E
DAT$E \$$BLK
.IRP n,<\$$BLK>
.PSECT $$B'n
$BL'n = .-$BB'n
.ENDM
$$LVL = $$LVL-1
.IRP n,<\$$LVL>
$$BLK = $$L'n
.ENDM
BLK$P
.ENDM BLK$E
;
; Enter the current load block psect
;
.MACRO BLK$P
.IRP n,<\$$BLK>
.PSECT $$B'n
.ENDM
.ENDM BLK$P
;
; Get the offset into the current data block
;
.MACRO DAT$A s
.IRP n,<\$$BLK>
s = .-$DB'n
.ENDM
.ENDM DAT$A
;
; Begin a data block
;
.MACRO DAT$B n
BLK$P
.BYTE 5,0
.WORD 0,$DL'n,$DB'n
.PSECT $$D'n
$DB'n = .
.ENDM DAT$B
;
; Terminate a data block
;
.MACRO DAT$E n
.PSECT $$D'n
$DL'n = .-$DB'n
.ENDM DAT$E
.MACRO DAT$P
.IRP n,<\$$BLK>
.PSECT $$D'n
.ENDM
.ENDM DAT$P
;+
; Top level user directives
;-
;
; Delcare a single-entry data base
;
.MACRO DAT$ m,t
.MCALL DAT$DF
DAT$DF
.IF B,<m>
$$CMD = 0
.IFF
$$CMD = 20
.IRP s,<DSR,COR>
.IIF IDN,<m>,<s>,.MEXIT
$$CMD = $$CMD+1
.ENDM
.IF LE,22-$$CMD
.ERROR ;"m" is invalid argument, assuming "DSR"
$$CMD = 20
.ENDC
.ENDC
$$VAR = 12
.IF NB,<t>
.IRP s,<UNT,TRB>
.IIF IDN,<t>,<s>,.MEXIT
$$VAR = $$VAR+1
.ENDM
.IF LE,14-$$VAR
.ERROR ;"t" is invalid argument, assuming "UNT"
$$VAR = 12
.ENDC
.ENDC
BLK$B
.IRP n,<\$$BLK>
.PSECT $$B0
.BYTE $$CMD,$$VAR
.WORD $DL'n,$BB'n
.ENDM
$$TOP = 0
DAT$P
.ENDM DAT$
;
; Declare a multiplex data base
;
.MACRO MPX$ m,t
.MCALL DAT$DF
DAT$DF
$$CMD = 30
.IF NB,<m>
.IRP s,<DSR,COR>
.IIF IDN,<m>,<s>,.MEXIT
$$CMD = $$CMD+1
.ENDM
.IF LE,32-$$CMD
.ERROR ;"m" is invalid argument, assuming "DSR"
$$CMD = 30
.ENDC
.ENDC
$$VAR = 12
.IF NB,<t>
.IRP s,<UNT,TRB>
.IIF IDN,<t>,<s>,.MEXIT
$$VAR = $$VAR+1
.ENDM
.IF LE,14-$$VAR
.ERROR ;"t" is invalid argument, assuming "UNT"
$$VAR = 12
.ENDC
.ENDC
BLK$B
.PSECT $$B0
.IRP n,<\$$VAR+10>
.BYTE $$CMD,$$VAR,n,0
.ENDM
.IRP n,<\$$BLK>
.WORD $DL'n,$BB'n
.ENDM
$$TOP = 1
DAT$P
.ENDM MPX$
;
; Declare the data base macros
; and set the identification block.
;
.MACRO DAT$DF
.MCALL DSR$W,COR$D,END$
.MCALL DAT$B,DAT$E,DAT$P
.MCALL BLK$B,BLK$E,BLK$P
.MCALL LIX$W,LIX$B
.MCALL CTL$W,CTL$B
.MCALL UNT$W,UNT$B
.MCALL TRB$W,TRB$B
.MCALL STA$W,STA$B
.MCALL CHR$W,CHR$B
.MCALL CSR$W,LST$D
.MCALL TMB$X,SYN$X
.MCALL TMB$,SYN$
$$BLK = 0
$$LVL = 0
$$NXT = 1
.PSECT IDENT
.RAD50 /MCB/
.BYTE 3,2
.ENDM DAT$DF
;
; Terminate formatting of an allocated memory block and
; return to previous block
;
.MACRO END$ var
.IF NB,<var>
DAT$A $$DSP
BLK$P
.BYTE 6,0
.WORD $$DSP,var
.IFF
BLK$P
.ENDC
.BYTE 0,0
.IF NE,$$LVL
BLK$E
.ENDC
.IF EQ,$$LVL
.IF NE,$$TOP
$$TOP = 0
BLK$B
.IRP n,<\$$BLK>
.PSECT $$B0
.WORD $DL'n,$BB'n
.ENDM
.ENDC
.ENDC
.IF NE,$$LVL
DAT$P
.ENDC
.ENDM END$
;+
; Secondary user directives
;-
;
; Store device characteristic(s) in byte(s)
;
.MACRO CHR$B t,list
.IF B,<list>
.PRINT ; The CHR$B macro has changed; consult documentation
.PRINT ; I will expand it the old way for you...
.IRP n,<t>
DAT$A $$DSP
.BLKB 1
BLK$P
.BYTE 2,40+n
.WORD $$DSP
DAT$P
.ENDM
.IFF
$$VAR = 30
.IRP s,<CTL,UNT,TRB>
.IIF IDN,<t>,<s>,.MEXIT
$$VAR = $$VAR+10
.ENDM
.IF LE,60-$$VAR
.ERROR ;"t" is invalid argument, assuming "UNT"
$$VAR = 40
.ENDC
.IRP n,<list>
DAT$A $$DSP
.BLKB 1
BLK$P
.BYTE 2,$$VAR+n
.WORD $$DSP
DAT$P
.ENDM
.ENDC
.ENDM CHR$B
;
; Store device characteristic(s) in word(s)
;
.MACRO CHR$W t,list
.IF B,<list>
.PRINT ; The CHR$W macro has changed; consult documentation
.PRINT ; I will expand it the old way for you...
.IRP n,<t>
DAT$A $$DSP
.BLKW 1
BLK$P
.BYTE 1,40+n
.WORD $$DSP
DAT$P
.ENDM
.IFF
$$VAR = 30
.IRP s,<CTL,UNT,TRB>
.IIF IDN,<t>,<s>,.MEXIT
$$VAR = $$VAR+10
.ENDM
.IF LE,60-$$VAR
.ERROR ;"t" is invalid argument, assuming "UNT"
$$VAR = 40
.ENDC
.IRP n,<list>
DAT$A $$DSP
.BLKW 1
BLK$P
.BYTE 1,$$VAR+n
.WORD $$DSP
DAT$P
.ENDM
.ENDC
.ENDM CHR$W
;
; Allocate block from core and store bias/address
;
.MACRO COR$D l
DAT$A $$DSP
.BLKW 2
.IF NB,<l>
BLK$P
.BYTE 11,0
.WORD $$DSP,l,0
DAT$P
.IFF
BLK$P
.IRP n,<\$$NXT>
.BYTE 11,0
.WORD $$DSP,$DL'n,$BB'n
.ENDM
BLK$B
.ENDC
.ENDM COR$D
;
; Store device CSR in word
;
.MACRO CSR$W add
DAT$A $$DSP
.WORD add
BLK$P
.BYTE 3,30
.WORD $$DSP
DAT$P
.ENDM CSR$W
;
; Store controller number in byte
;
.MACRO CTL$B
DAT$A $$DSP
.BLKB 1
BLK$P
.BYTE 2,11
.WORD $$DSP
DAT$P
.ENDM CTL$B
;
; Store controller number in word
;
.MACRO CTL$W
DAT$A $$DSP
.BLKW 1
BLK$P
.BYTE 1,11
.WORD $$DSP
DAT$P
.ENDM CTL$W
;
; Allocate block from DSR and store address
;
.MACRO DSR$W l
DAT$A $$DSP
.BLKW 1
.IF NB,<l>
BLK$P
.BYTE 10,0
.WORD $$DSP,l,0
DAT$P
.IFF
BLK$P
.IRP n,<\$$NXT>
.BYTE 10,0
.WORD $$DSP,$DL'n,$BB'n
.ENDM
BLK$B
.ENDC
.ENDM DSR$W
;
; Store line index in byte
;
.MACRO LIX$B
DAT$A $$DSP
.BLKB 1
BLK$P
.BYTE 2,10
.WORD $$DSP
DAT$P
.ENDM LIX$B
;
; Store line index in word
;
.MACRO LIX$W
DAT$A $$DSP
.BLKW 1
BLK$P
.BYTE 1,10
.WORD $$DSP
DAT$P
.ENDM LIX$W
;
; Set up list-head in doubleword
;
.MACRO LST$D
.WORD 0
DAT$A $$DSP
.WORD $$DSP-2
BLK$P
.BYTE 3,1
.WORD $$DSP
DAT$P
.ENDM LST$D
;
; Store physical station address in byte
;
.MACRO STA$B
DAT$A $$DSP
.BLKB 1
BLK$P
.BYTE 2,50
.WORD $$DSP
DAT$P
.ENDM STA$B
;
; Store physical station address in word
;
.MACRO STA$W
DAT$A $$DSP
.BLKW 1
BLK$P
.BYTE 1,50
.WORD $$DSP
DAT$P
.ENDM STA$W
;
; Set up a SYNCH block
;
.MACRO SYN$
.PRINT ; The SYN$ macro has been renamed to SYN$X
.PRINT ; I will call it for you...
SYN$X
.ENDM SYN$
.MACRO SYN$X
.WORD 0,0,0
.ENDM SYN$X
;
; Set up a timer block
;
.MACRO TMB$ t
.PRINT ; The TMB$ macro has been renamed to TMB$X
.PRINT ; I will call it for you...
TMB$X t
.ENDM TMB$
.MACRO TMB$X t
.BLKW 1
.BYTE 6,0
DAT$A $$DSP
.WORD $$DSP-4
BLK$P
.BYTE 3,1
.WORD $$DSP
DAT$P
.BLKW 4
.WORD t
.WORD 0
.ENDM TMB$X
;
; Store tributary number in byte
;
.MACRO TRB$B
DAT$A $$DSP
.BLKB 1
BLK$P
.BYTE 2,13
.WORD $$DSP
DAT$P
.ENDM TRB$B
;
; Store tributary number in word
;
.MACRO TRB$W
DAT$A $$DSP
.BLKW 1
BLK$P
.BYTE 1,13
.WORD $$DSP
DAT$P
.ENDM TRB$W
;
; Store unit number in byte
;
.MACRO UNT$B
DAT$A $$DSP
.BLKB 1
BLK$P
.BYTE 2,12
.WORD $$DSP
DAT$P
.ENDM UNT$B
;
; Store unit number in word
;
.MACRO UNT$W
DAT$A $$DSP
.BLKW 1
BLK$P
.BYTE 1,12
.WORD $$DSP
DAT$P
.ENDM UNT$W
;
; Verify an address
;
.MACRO VFY$ var
DAT$A $$DSP
BLK$P
.BYTE 6,0
.WORD $$DSP,var
DAT$P
.ENDM VFY$