Google
 

Trailing-Edge - PDP-10 Archives - BB-F493Z-DD_1986 - 10,7/fact.mem
There are 4 other files named fact.mem in the archive. Click here to see a list.


SPECIFICATION



                            FACT
          A BRIEF DESCRIPTION OF THE  CONTENTS  OF
          FACT.SYS,  THE ACCOUNTING SYSTEM RECORDS
          FILE.



                    Date:  13-Dec-72
                    File:  FACT.RNO
                    Edition:  1










The information in this document is subject to change  without  notice
and  should  not  be  construed  as  a  comitment by Digital Equipment
Corporation.  Digital Equipment Corporation assumes no  responsibility
for and errors that may appear in this document.

The software described in this document is furnished under  a  license
and  may  be  used or copied only in accordance with the terms of such
license.

Digital Equipment Corporation assumes no responsibility for the use or
reliability  of  its  software  on  equipment  that is not supplied by
DIGITAL.

     Copyright (C) 1972,1979 by Digital Equipment Corporation

The following are trademarks of Digital Equipment Corporation:

DIGITAL        DECsystem-10   MASSBUS
DEC            DECtape        OMNIBUS
PDP            DIBOL          OS/8
DECUS          EDUSYSTEM      PHA
UNIBUS         FLIP CHIP      RSTS
COMPUTER LABS  FOCAL          RSX
COMTEX         INDAC          TYPESET-8
DDT            LAB-8          TYPESET-10
DECCOMM        DECsystem-20   TYPESET-11
FACT                                                            Page 2


1.0  INTRODUCTION

The file  FACT.SYS  and  its  auxilliaries  FACT.X01,  FACT.X02,  ...,
FACT.X77   contain   a   transaction  record  of  the  activity  on  a
DECsystem-10 timesharing system.  The fact  files  are  written  by  a
variety  of  system programs when each user logs on or off the system,
runs batch jobs, uses the I/O spoolers, and  at  ten-minute  intervals
throughout his use of the system.



1.1  Standard Information

Each entry includes an indication of why and when it was written,  the
job  number  to which it refers, the terminal running the job, and the
project, programmer number of the user.   In  addition,  many  entries
contain  additional  information relevant to the particular conditions
under which they were  written,  such  as  the  name  of  the  program
running, or statistics on useage of sharable resources.



1.2  Use of Auxilliary Files

Ordinarily, all the information described in this document  is  output
to  SYS:FACT.SYS,  by appending new entries to the end of the existing
file, or by creating FACT.SYS if it  does  not  exist.   If,  however,
FACT.SYS  should  be inaccessable because of LOOKUP or ENTER failures,
or because of being in a file-being-modified state  for  ten  seconds,
each  of  the programs which writes FACT file information is set up to
give up on FACT.SYS, and start trying  to  write  FACT.X01.   If  this
fails,  FACT.X02  is tried, and so on, counting in octal, to FACT.X77.
If all 64 files are inaccessable, the message

          ACCOUNTING SYSTEM FAILURE....
          CALL THE OPERATOR.

is printed, and the entry is not  written.   Note  that,  because  the
condition  which  makes  a  file inaccessable may be cleared, FACT.SYS
(for instance) may contain entries both  before  and  after  those  in
FACT.X01.   Programs  which  depend on chronological order in the FACT
files should merge the auxilliaries with FACT.SYS, sorting on date and
time, before processing.



1.3  Processing Procedures

Because each installation will have different needs for reporting  and
sumarizing computing activity, DEC does not attempt to provide general
purpose programs for processing the FACT  files.   It  does,  however,
distribute  two  programs,  MONEY and FACTPR which provide examples of
how  reporting  programs  could  be  written.   MONEY  is  a   simple,
supported,  reporting  program, written in MACRO, whereas FACTPR is an
unsupported conversion program, suitable for use as a pre-processor to
FACT                                                            Page 3


a complex reporting system which might be written in COBOL.



2.0  DEC-DEFINED ENTRIES

A 9-bit byte in the first word of each entry identifies  the  type  of
the  entry.  The values 0, 377, and 777 in this type code are reserved
as markers in the FACT files.  Values from 1 to 376 are  reserved  for
definition by DEC, while 400 to 776 are for customer definition.



2.1  Basic Entry Format

The first three words of every entry are the same, as follows:

     Word#     Description
     -----     -----------

     0         header -- 4 bytes, as follows:

               0-8       type code, which identifies  the  reason  for
                         writing  the  entry,  and  the  format of the
                         entry.  If the type code is even  (bit  8=0),
                         the date/time word (2) is in old format, with
                         12-bit date, and 24-bit time in jiffies.   If
                         the type code is odd (bit 8=1), the date/time
                         word is in new standard date time format, and
                         clock  rate dependencies are not permitted in
                         time representations.

               9-17      job  number  to  which  this  entry   refers.
                         Usually,   but  not  always,  the  job  which
                         created the entry.

               18-29     terminal number (as in TTYnnn) to  which  the
                         job  is  attached.  CTY is indicated by 7777,
                         and a detached job by 7776.

               30-35     length of the entry in words, including  this
                         header  word.  If an entry has only the basic
                         information, this byte is 3.

     1         project-programmer number to which this entry refers.

     2         date and time  at  which  the  entry  was  created,  as
               follows:

               a.  if header bit 8=0, old format:

                   0-11   date, in system 12-bit format.
                   12-35  time, in clock ticks since midnight.

               b.  if header bit 8=1, new format:
FACT                                                            Page 4


                   0-17   days since Nov.  17, 1858
                   18-35  time, as a fraction of a day



2.2  LOGIN (100), ATTACH (240)

When a user logs in, or attaches his terminal to a detached job,  only
the  basic  information  (as  described  in  2.1)  is  stored if he is
successful:

          Terminal and job numbers
          Project, programmer number
          Date and time of day

If, however, the attempt is unsuccessful (e.g., he does not  know  the
password),  then  20  is  added  to the type code, and the password he
tried is recorded as word 3.  Further, if the  failure  is  due  to  a
program's  attempt to LOGIN an illegal job on a PTY under its control,
the project programmer number of that  job  is  recorded  as  word  4.
LOGIN  failures,  therefore,  are  recorded  as  type  120, and ATTACH
failures as 260.



2.3  CHKPNT (200)

At ten-minute  intervals  throughout  the  operation  of  the  system,
so-called  CHECKPOINT  information  is  recorded about each job in the
system.  In systems which use  DAEMON,  it  takes  the  CHECKPOINT  at
intervals  controlled by the CHKTIM assembly parameter.  Other systems
may use the  CHKPNT  program  to  record  the  same  information.   In
addition  to  the  basic  information listed under 2.1, CHKPNT entries
consist of:

     Word#     Description
     -----     -----------

     3         job's accumulated run time, in milliseconds.

     4         job's integrated time-size product, in kilo-core-ticks.

     5         total disk blocks read by and for the job.

     6         total disk blocks written by and for the job.

     7         name of the program in the low segment, in SIXBIT.



2.4  LOGOUT (140)

When a user logs off the system,  the  LOGOUT  program  records  final
values  of  all  the  CHECKPOINT  information (except program name) to
sumarize the job.
FACT                                                            Page 5


2.5  SPOOL (250)

Each time the spoolers  complete  a  request,  unless  assembled  with
FACTSW zero, they call DAEMON to write a FACT file entry.  The job and
terminal numbers in the header word are those of the spooling program,
but  the  PPN  is  that  of  the  user  for whom the spool request was
performed.  They record the  following  data  in  the  FACT  file,  in
addition to the basic information:

     Word#     Description
     -----     -----------

     3         three bytes:

               0-11   queue name in SIXBIT
               12-17  station number
               18-35  APR serial number

     4         runtime used  by  the  spooler  for  this  request,  in
               jiffies (clock ticks).

     5         kilo-core-ticks used by the spooler for this request.

     6         disk reads by the spooler for this request.

     7         disk writes by the spooler for this request.

     8         physical device name of the spooler output device.

     9         sequence number of the spool request.

     10        quantity of output in same units as output  limits  for
               this queue (e.g., pages, feet, etc.).



2.6  SPACE (160)

When the operator runs the (unsupported)  SPACE  program  to  evaluate
disk  utilization, he can ask it (with the /FACT switch) to record the
current figures in the FACT file for later use by a  billing  program.
This  information  includes,  in  addition  to  basic  data, status of
various variables in the  retrieval  information  block  of  the  file
directory (UFD RIB) for each user on each file structure.  The job and
terminal numbers in the header  word  refer  to  those  of  the  SPACE
program,  but  the  PPN  is that of the UFD to which the entry refers.
The rest of the entry is:

     Word#     Description
     -----     -----------

     3         file structure name, in SIXBIT, on which this  UFD  was
               found.

     4         UFD status word (.RBSTS) from the UFD RIB.
FACT                                                            Page 6


     5         first come, first served quota (.RBQTF).

     6         logged-out quota (.RBQTO).

     7         reserved quota (.RBQTR).

     8         blocks presently allocated to this user (.RBUSD).

     9         blocks remaining available for first come, first served
               allocation on this structure (.DCFCT).

     10        one of the following three words, in SIXBIT:

               OUT       there are no jobs logged in under this ppn.

               IN        there is at least one job presently logged in
                         under this ppn.

               RECOMP    there are no jobs  logged  in,  but  the  UFD
                         status  word  shows  the  logged-in  bit set.
                         Allocation, therefore, needs to be recomputed
                         for  this  user.   If  the  /BATCH switch was
                         specified, SPACE has submitted a dummy  batch
                         job  to  force  re-computation of allocation,
                         but this job has not completed when the entry
                         is  written,  so word 8 of the entry (.RBUSD)
                         may be incorrect.



2.7  Restart (370)

Whenever DAEMON is run (usually by the OPSER auto  startup  file),  it
writes  a basic entry, indicating that the system was reloaded, so the
processing program can reset itself, figuring that jobs not logged off
in the FACT file were running when the system crashed.



2.8  Shutdown (372)

Unimplemented, but intended to mark a scheduled system shutdown.
FACT                                                            Page 7


2.9  Hiatus (377)

Whenever the FACT file is updated, the routine which adds a new  entry
checks  the  last  word  of  the file (as indicated by the file length
returned by LOOKUP) for the end-of-file  code  (see  below).   If  the
end-of-file  indicator  is  not  found,  the routine backs up until it
finds a non-zero word or the beginning of the block.  Hiatus codes are
then  stored in the words backed over, to mark the spot where data may
have been lost.



2.10  End-of-file (777)

The last word in the FACT file should always be the end-of-file code.



2.11  New Entry Types

As development of DECsystem-10 software continues, it is  likely  that
DEC  will  add  new  entry types to the FACT files.  Customer programs
which process the file, therefore, should be written to ignore, except
possibly  for  a  warning message, new codes which appear in the file.
This will ensure upward compatability.



3.0  CUSTOMER-DEFINED ENTRIES

Entry types 400 through 776 are reserved for customer  definition  and
implementation.    DEC   recommends  that  the  format  of  the  basic
information  words  be  followed  in  customer-defined  entries.   Two
mechanisms are available for customers writing FACT file entries.  The
.FACT function of the DAEMON UUO is the easiest to use, (documented in
UUOPRV,  in  the Specifications section of the Software Notebooks) but
users with systems  which  do  not  run  DAEMON  may  use  the  APPEND
subroutine,  which  may  be  found  in  LOGIN,  LOGOUT, or DAEMON, for
instance.  Note that the FACT file  contains  privileged  information,
and so is accessable only to jobs with JACCT or running under [1,2].




[End of FACT.RNO]