Trailing-Edge
-
PDP-10 Archives
-
BB-F494Z-DD_1986
-
10,7/sed1jo.mac
There are 10 other files named sed1jo.mac in the archive. Click here to see a list.
TITLE SED1JO - SED JOURNALING ROUTINES
SUBTTL A CHRISTOPHER HALL FECIT
;COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1979,1983.
;NOTE: THIS ENTIRE MODULE IS UNDER SWITCH FTJOUR.
;IF FTJOUR==0 SED CAN BE ASSEMBLED WITHOUT THIS MODULE
SEARCH SEDSYM
SALL
IFN TOPS10,<
SEARCH UUOSYM
TWOSEG
RELOC 400000
>
IFE TOPS10,<
SEARCH MONSYM
>
IFN FTJOUR,<
;SUBROUTINES TO MANIPULATE THE JOURNAL FILE
;(CONTROLLED BY THE /JOURN AND /RECOV SWITCHES
;SUBROUTINE TO START UP THE JOURNAL FILE (SEDJRN.TMP)
;T1 T2 PRESERVED; FRAGS T3
JRNSTT::MOVEM TY,JRNPTR ;SAVE TYPE-OUT POINTER; POINT TO JRN BUFFER
MOVE TY,[POINT 7,JOURNL]
MOVEI T1,FILSPC ;GET CURRENT FILE SPECS
MOVE T4,DISPTR ;AND DISPLAY POINTER
PUSHJ P,EXIFIL ;OUTPUT THE STATUS OF THE ACTIVE FILE
SKIPN OLDSPC ;IS THERE AN ALTERNATE FILE?
JRST JRNST0 ;NO - DON'T OUTPUT ITS STATUS
IFE TOPS10,<
MOVE T2,TY ;SEE IF THE FILESPEC WAS LONG
HRRZS TY
CAILE TY,JOURNL+<JRNSIZ_-1>
PUSHJ P,JRNSVO ;OUTPUT IF BUFFER IS MORE THAN HALF FULL
MOVE TY,T2
>
MOVEI T1,OLDSPC ;GET ALTERNATE FILE SPECS
MOVE T4,SAVEDP ;AND DISPLAY POINTER
DMOVEM RW,SAVEAC+2
HRRZ RW,SAVERW
HLRZ CM,SAVERW
EXCH SL,SAVESL
PUSHJ P,EXIFIL ;OUTPUT THE STATUS OF THE ALTERNATE FILE
DMOVE RW,SAVEAC+2
EXCH SL,SAVESL
JRNST1: SKIPE OUTFLG ;IS THERE AN /OUTPUT: SWITCH IN EFFECT?
PUSHJ P,JRNOSW ;YES - OUTPUT IT, TOO
EXCH TY,JRNPTR ;SAVE JOURNAL BUFFER PTR; GET TYPE-OUT PTR
SETOM JRNBIT ;NOTE THAT FIRST FILE WRITE HAS NOT BEEN DONE
MOVE T1,[POINT 7,JOURNL+JRNSIZ-1,34]
MOVEM T1,JRNENP ;SAVE POINTER TO END OF JOURNAL
IFN TOPS10,<
TLZ TM,JRO ;NOTE THAT JOURNAL FILE IS CLOSED
SETZM JRNDSK ;SAY WRITING DISK BLOCK 1
>
POPJ P, ;FINISH OFF AND RETURN
JRNST0: PUSHJ P,EXIFL1 ;NO ALTERNATE FILE - OUTPUT A CRLF
JRST JRNST1 ;AND FINISH OFF
;SUBROUTINE TO OUTPUT THE /OUTPUT: SWITCH WITH THE CURRENT FILE
JRNOSW: MOVE T1,[ASCII ?$OUT:?]
PUSHJ P,PUTSQ1 ;OUTPUT THE /OUTPUT: SWITCH
MOVEI T1,NEWSPC ;GET THE NEW FILE SPECS
PUSHJ P,PUTSTG ;PUT FILESPECS IN BUFFER
MOVE T1,[ASCII ?^SW
?]
JRST PUTSQ1 ;END WITH THE SWITCH COMMAND AND A CRLF
;SUBROUTINE TO SAVE A CHARACTER IN THE JOURNAL BUFFER & OUTPUT IT IF FULL
;CALL WITH CHARACTER IN T1; T3 IS FRAGGED
JRNSVA::MOVEM T1,SAVEAC ;PRESERVE THE CHARACTER
CAIE T1,"^" ;GOT A REAL UP-ARROW,
CAIN T1,"$" ; OR A REAL DOLLAR SIGN?
JRST JRSVA1 ;YES - PREPEND AN UP-ARROW
ROT T1,-7 ;LEFT-JUSTIFY IT
JRST JRSVC0 ;OUTPUT THE CHARACTER AND RETURN
JRSVA1: ROT T1,-^D14 ;LEFT-JUSTIFY TWO CHARACTERS
TLO T1,570000 ;PRECEDE THE CHARACTER WITH AN UP-ARROW
JRST JRSVC0 ;OUTPUT THEM AND RETURN
;SUBROUTINE TO SAVE A COMMAND IN THE JOURNAL BUFFER & OUTPUT IT IF FULL
;CALL WITH COMMAND INDEX IN AC DO; T1, T3 FRAGGED
JRNSVC::CAIN DO,$ABORT ;GOT AN ABORT COMMAND?
POPJ P, ;YES - DON'T SAVE IT (IN CASE OF REENTER)
CAIN DO,$HELP ;GOT A HELP OR RECOVER COMMAND?
TLNE F,ENT ;YES - IN A PARAMETER?
SKIPA T1,CMDNAM(DO) ;NOT HELP (MAY BE RECOVER) - GET COMMAND NAME
POPJ P, ;HELP - IGNORE THE HELP COMMAND
CAMN T1,CMDNAM+$RETRN ;IS IT A RETURN COMMAND?
TRO T1,6424 ;YES - FOLLOW IT WITH A REAL CRLF
JRSVC0: TRNE F,XCT!XBN ;EXECUTING OR RESTORING A JOURNAL?
JRST JRSVC2 ;YES - DON'T DO ANY SAVING
EXCH T2,JRNPTR ;NO - SAVE T2 AND GET PTR TO JOURNAL BUFFER
JRSVC1: LSHC T0,7 ;SHIFT IN A CHARACTER
IDPB T0,T2 ;SAVE IT IN THE JOURNAL BUFFER
CAMN T2,JRNENP ;IS BUFFER FULL?
PUSHJ P,JRNSVO ;YES - OUTPUT IT
JUMPN T1,JRSVC1 ;LOOP THROUGH COMMAND NAME
EXCH T2,JRNPTR ;SAVE JOURNAL POINTER AND GET T2 BACK
JRSVC2: MOVE T1,SAVEAC ;RESTORE AC T1
POPJ P, ;DONE
;SUBROUTINE TO SAVE AN EXECUTE CALL IN THE JOURNAL BUFFER & OUTPUT IT IF FULL
;CALL WITH EXECUTE INDEX IN DO; T1, T3 FRAGGED
JRNSVX::MOVE T1,DO ;GET EXECUTE INDEX
OR T1,[5,,726140] ;PRECEDE INDEX WITH "^X" AND LIGHT 140 (REALLY)
LSH T1,^D15 ;LEFT-JUSTIFY THE STRING
JRST JRSVC0 ;OUTPUT THE STRING AND RETURN
;SUBROUTINE TO WRITE OUT THE JOURNAL BUFFER
JRNSVO: MOVEM T1,SAVEAC+1 ;OUTPUT BUFFER: SAVE T1
SETZ T3, ;END THE BUFFER WITH A NULL
SKIPN T1,T2 ;(BUT DON'T HURT THE POINTER IN T2)
POPJ P, ;DONE IT NOT A POINTER (EDITING CHEERY MSG)
IDPB T3,T1
IFN TOPS10,<
TLOE TM,JRO ;IS THE JOURNAL ALREADY OPEN?
JRST JRSVO1 ;YES - SKIP THIS
MOVEI T3,.FOAPP ;NO - ASSUME THIS IS NOT THE FIRST TIME
SKIPE JRNBIT ;HAS THE FILE BEEN WRITTEN TO?
MOVEI T3,.FOWRT ;OF COURSE NOT - OPEN FOR THE FIRST TIME
HRRM T3,JRNFIL+.FOFNC
SETZM JRNBIT ;MARK JOURNAL FILE AS OPEN
MOVE T3,USRPPN ;OPEN IT IN THE USER'S TOP-LEVEL DIR
MOVEM T3,JRNLKB+3
MOVE T3,[6,,JRNFIL] ;OPEN OR APPEND TO THE FILE
FILOP. T3,
JRST JRSERR ;OOPS - CAN'T DO IT
HLLZS JRNLKB+1 ;CLEAN UP THE BLOCK FOR NEXT TIME
SETZM JRNLKB+2
JRSVO1: MOVE T1,JRNDSK ;GET NUMBER OF CURRENT DISK BLOCK
MOVE T3,JRNENP ;IF NOT FIRST OUTPUT TO THIS BLOCK,
CAME T3,[POINT 7,JOURNL+JRNSIZ-1,34]
USETO 11,1(T1) ; SET TO THE BLOCK'S START
OUTPUT 11,JRNCCL ;OUTPUT THE JOURNAL RECORD
CAME T3,[POINT 7,JOURNL+JRNSIZ-1,34]
JRST JRSVO2 ;IF FIRST OUTPUT TO BLOCK, DO CHECKPOINT
MOVEI T1,.FOURB ;GET THE CHECKPOINT FILE FUNCTION
HRRM T1,JRNFIL+.FOFNC
MOVE T1,[1,,JRNFIL] ;POINT TO THE ARGUMENT BLOCK
FILOP. T1, ;CHECKPOINT THE FILE
CAIA ;COULDN'T - DO IT THE OLD WAY
JRST JRSVO2 ;SUCCESS - CONTINUE
TLZ TM,JRO ;(OLD WAY) MARK FILE AS CLOSED
RELEAS 11, ;CLOSE AND RELEASE THE FILE
JRSVO2: CAMN T3,[POINT 7,JOURNL+177,34] ;AT END OF BUFFER?
JRST [AOS JRNDSK ;YES - BUMP DISK BLOCK NUMBER
SETZM JOURNL+JRNSIZ-1 ;CLEAN OUT THE JOURNAL BUFFER
MOVE T3,[JOURNL+JRNSIZ-1,,JOURNL+JRNSIZ]
BLT T3,JOURNL+177
MOVE T2,[POINT 7,JOURNL] ;WRITE FROM START OF BUFFER
MOVE T3,[POINT 7,JOURNL+JRNSIZ-1,34]
JRST JRSVO3] ;RE-START EO-BUFFER PTR; FLOW
ADDI T3,JRNSIZ ;NOT AT END - BUMP END POINTER
CAMLE T3,[POINT 7,JOURNL+177,34] ;BEYOND END NOW?
MOVE T3,[POINT 7,JOURNL+177,34] ;YES - POINT AT THE END
JRSVO3: MOVEM T3,JRNENP ;SAVE END-OF-JOURNAL POINTER
>
IFE TOPS10,<
SKIPN JRNBIT ;WRITING THE FILE FOR THE FIRST TIME?
JRST JRSVO1 ;NO - GO APPEND TO THE FILE
SETZM INIJFN ;SAY JOURNAL FILE DOESN'T HAVE TO EXIST
MOVEI T1,INIJFN ;CREATE JOURNAL IN USER'S LOGGED-IN AREA
HRROI T2,JRNFIL ;POINT TO THE JOURNAL NAME
GTJFN
JRST JRSERR
HRRZM T1,JRNJFN ;SAVE JFN FOR LATER
MOVSI T1,(GJ%OLD) ;PATCH UP THE GTJFN BLOCK
MOVEM T1,INIJFN
SETZM JRNBIT ;SAY IT'S NO LONGER THE FIRST WRITE
SKIPA T2,[7B5+OF%WR] ;SET TO OPEN UP A NEW JOURNAL FILE
JRSVO1: MOVE T2,[7B5+OF%APP] ;SET TO APPEND TO THE EXISTING FILE
MOVE T1,JRNJFN ;GET THE JOURNAL'S JFN
OPENF
JRST JRSERR
HRROI T2,JOURNL ;OUTPUT THE JOURNAL BUFFER
SETZ T3,
SOUT
HRLI T1,(CO%NRJ) ;CLOSE THE JOURNAL BUT DON'T RELEASE THE JFN
CLOSF
JRST JRSERR ;(IT REALLY OUGHT TO WORK)
MOVE T2,[POINT 7,JOURNL] ;RESET JOURNAL BUFFER POINTER
>
MOVE T1,SAVEAC+1 ;RESTORE THE SAVED T1
POPJ P, ;DONE
;HERE TO READ FROM JOURNAL - FROM XCTGET, WHEN JRC (AND XCT OR XBN) IS SET
LOPJRN::PUSHJ P,SRCIPT ;DOES THE USER WANT TO ABORT RECOVERY?
JRST JABERR ;YES - ABORT IT
PUSHJ P,LOPJRR ;GET A REAL CHARACTER FROM THE JOURNAL
CAIN T1,"$" ;GOT AN ESCAPE COMMAND?
JRST [MOVEI T1,33 ;YES - GET ITS INDEX
JRST LOOP2] ;AND USE IT
CAIE T1,"^" ;GOT A TYPE-IN CHARACTER?
JRST LOPJRA ;NO - JUST PUT IT IN FILE OR BUFFER
PUSHJ P,LOPJRR ;YES - GET FIRST CHARACTER OF COMMAND
CAIE T1,"$" ;REALLY WANT A REAL DOLLAR SIGN,
CAIN T1,"^" ; OR AN UP-ARROW?
JRST LOPJRA ;YES - HANDLE IT LIKE A CHARACTER
MOVEI PT,"^" ;NO - GET AN UP-ARROW
PUSHJ P,LOPJC1 ;PUT NEW CHARACTER IN WITH IT
PUSHJ P,LOPJRC ;GET REST OF COMMAND NAME
CAME PT,["^RF"] ;GOT A ROLL FORWARD
CAMN PT,["^RB"] ; OR BACKWARD?
JRST LOPJR2 ;YES - NEED TO GET ANOTHER CHARACTER
IFE TOPS10,<
CAMN PT,["^PU"] ;PUSH COMMAND?
JRST LOPJRN ;YES - IGNORE IT
>
; CAMN PT,["^RW"] ;RE-WRITE COMMAND?
; JRST LOPJRN ;YES - IGNORE IT
LSH PT,^D15 ;NO - LEFT-JUSTIFY COMMAND NAME
LOPJR1: MOVEI T1,CMDLEN-1 ;LOOK FOR COMMAND AMONG NAMES
CAME PT,CMDNAM(T1) ;IS THIS IT?
SOJGE T1,.-1 ;NO - KEEP LOOKING
JUMPGE T1,LOOP2 ;PROCESS COMMAND, IF THAT'S WHAT IT IS
MOVE T1,PT ;ELSE LOOK AT FIRST TWO CHARACTERS OF NAME
SETZ T0,
LSHC T0,^D14
CAIE T0,"^X" ;GOT AN EXECUTE BUFFER?
JRST JRRERR ;NO - IT'S AN ERROR
ROT T1,7 ;YES - GET EXECUTE INDEX (+ 140) IN RH
JRST ILCER0 ;GO PROCESS THE EXECUTE
LOPJR2: PUSHJ P,LOPJRC ;GET REST OF COMMAND NAME
LSH PT,^D8 ;LEFT-JUSTIFY COMMAND NAME
JRST LOPJR1 ;GO FIND THE COMMAND
LOPJRA:
IFE TOPS10,<
IFN FTECHO,<
TRNN F,XBN ;DOES THE USER WANT TO SEE THE ACTION?
JRST ALPNUM ;NO - GO HANDLE IT LIKE A CHARACTER
TLNN F,ENT ;IN A PARAMETER?
TYPCHA ;NO - DISPLAY THE CHARACTER
>>
JRST ALPNUM ;GO HANDLE IT LIKE A CHARACTER
LOPJRC: PUSHJ P,LOPJRR ;GET CHARACTER FROM THE JOURNAL
LOPJC1: LSH PT,7 ;SHIFT OVER ALREADY-GOTS
OR PT,T1 ;PUT NEW CHARACTER IN WITH THEM
POPJ P, ;DONE
LOPJRR: ILDB T1,JRNPTR ;GET CHARACTER FROM THE JOURNAL
CAIL T1," " ;CONTROL CHARACTER OR NULL?
POPJ P, ;NO - RETURN
JUMPN T1,LOPJRR ;YES - IGNORE CONTROL CHARACTERS
PUSHJ P,JRNRED ;IF NULL READ ANOTHER PIECE OF THE JOURNAL
JRST LOPJRR ;GET A CHARACTER FROM IT AND CONTINUE
;SUBROUTINE FOR RECOVERING THE JOURNAL:
;OPEN THE JOURNAL, READ THE FIRST BUFFERFUL OF COMMANDS,
;AND SET UP THE FILE AND ALTERNATE
JRNGET::SETZM JRNFLG ;SAY THERE'S MORE FILE TO COME
SETZM RSCANF ;FORGET FILE GIVEN IN RESCAN
IFN TOPS10,<
MOVEI T1,.FORED ;SET UP THE FILE FOR READING
HRRM T1,JRNFIL+.FOFNC
MOVE T1,USRPPN ;LOOP FOR THE FILE IN THE USER'S DIRECTORY
MOVEM T1,JRNLKB+3
MOVE T1,[6,,JRNFIL] ;LOOP UP THE FILE
FILOP. T1,
JRST JRNERR ;ERROR
HLLZS JRNLKB+1 ;CLEAN UP THE BLOCK FOR NEXT TIME
SETZM JRNLKB+2
SETOM JRNDSK ;NOTE WILL BE READING THE FIRST DISK BLOCK
>
IFE TOPS10,<
MOVEI T1,INIJFN ;LOOK FOR THE JOURNAL IN THE LOGGED-IN AREA
HRROI T2,JRNFIL
GTJFN
JRST JRNERR
HRRZ T1,T1 ;CLEAR FLAGS OUT OF LH OF T1
MOVEM T1,JRNJFN ;SAVE JFN FOR LATER
MOVE T2,[7B5+OF%RD]
OPENF
JRST JRNERR
>
PUSHJ P,JRNRED ;READ FIRST BLOCK OF THE JOURNAL
MOVE T2,[POINT 7,JOURNL]
MOVEI T3,FILSPC ;READ OLD FILESPECS
PUSHJ P,JRNCPY
MOVEI T3,OLDSPC ;AND CURRENT FILESPECS
PUSHJ P,JRNCPY
MOVEM T2,JRNPTR ;SAVE THE POINTER INTO THE JOURNAL
POPJ P, ;DONE
JRNRED::SKIPE JRNFLG ;IS THERE MORE FILE TO READ?
JRST JRNEND ;NO - DONE
MOVE T2,[POINT 7,JOURNL]
MOVEM T2,JRNPTR ;YES - RESET POINTER INTO BUFFER
IFN TOPS10,<
INPUT 11,JRNCCL ;READ THE NEXT BUFFERFUL OF COMMANDS
STATZ 11,760000 ;REACHED END OF FILE (OR AN ERROR)?
JRST JRNDUN ;YES - NOTE THAT END OF FILE HAS BEEN REACHED
AOS JRNDSK ;NO - BUMP NUMBER OF DISK BLOCK JUST READ
>
IFE TOPS10,<
MOVE T1,JRNJFN ;GET JFN
HRROI T2,JOURNL ;AND A BUFFERFUL OF COMMANDS
MOVNI T3,5*JRNSIZ
SIN
ERJMP JRNDUN ;ON END OF FILE GIVE A NON-SKIP RETURN
>
POPJ P, ;READ SUCCEEDED - DONE
;SUBROUTINE TO COPY FILESPECS FROM (T2) TO (T3) UNTIL A CARRIAGE RETURN
JRNCPY: HRLI T3,440700 ;MAKE TARGET ADDRESS A POINTER
JRNCP0: ILDB T1,T2 ;GET A CHARACTER
CAIN T1,15 ;CARRIAGE RETURN?
JRST JRNCP1 ;YES - FINISH OFF
IDPB T1,T3 ;NO - SAVE THE CHARACTER
JRST JRNCP0 ;AND GET MORE
JRNCP1: ILDB T1,T2 ;SKIP OVER THE LINEFEED
SETZ T1, ;END FILESPECS WITH A NULL
IDPB T1,T3
POPJ P, ;DONE
;HERE WHEN RECOVERING, WHEN END OF JOURNAL FILE IS REACHED
JRNDUN: SETOM JRNFLG ;SAY END OF FILE HAS BEEN REACHED
IFN TOPS10,<
RELEAS 11, ;CLOSE AND RELEASE THE JOURNAL FILE
;FALL INTO THE CODE AT JRNEND
>
IFE TOPS10,<
MOVE T1,JRNJFN ;THROW AWAY THE JOURNAL FILE
CLOSF ;CLOSE IT
POPJ P, ;IT BETTER WORK
POPJ P, ;DONE
>
JRNEND: MOVE T2,[POINT 7,JOURNL]
MOVEM T2,JRNPTR ;INITIALIZE THE JOURNAL BUFFER POINTER
SKIPN JRNBIT ;WANT TO KEEP APPENDING TO THIS JOURNAL?
JRST JRNEN1 ;NO - DON'T INITIALIZE
TLO TM,JRW ;YES - NOTE THAT JOURNAL IS NOW BEING WRITTEN
IFN TOPS10,<
SETZM JOURNL+JRNSIZ-1 ;CLEAN OUT THE JOURNAL BUFFER
MOVE T3,[JOURNL+JRNSIZ-1,,JOURNL+JRNSIZ]
BLT T3,JOURNL+177
>
MOVE T1,[POINT 7,JOURNL+JRNSIZ-1,34]
MOVEM T1,JRNENP ;SAVE POINTER TO END OF JOURNAL BUFFER
SETZM JRNBIT
JRNEN1: SKIPA T1,[[ASCIZ /#########File recovered/]]
JRNERR: MOVEI T1,[ASCIZ /#####Can't find journal file/]
JRNER1: TRZ F,XCT!XBN ;END THE JOURNAL RESTORE
IFN TOPS10,<
TLZ TM,JRC!JRO ;CLEAR RECOVERY BIT; NOTE FILE IS NOT OPEN
>
IFE TOPS10,<
TLZ TM,JRC ;CLEAR RECOVERY BIT
>
SETZM JRNFLG
JRST STFER1 ;TELL USER THAT RECOVERY IS DONE
JABERR: SKIPA T1,[[ASCIZ /#####Journal recovery aborted/]]
JRRERR: MOVEI T1,[ASCIZ /######Bad command in journal/]
JRST JRNER1
JRSERR: MOVEI T1,[ASCIZ /#####Can't write journal file/]
TLZ TM,JRW ;DON'T DO JOURNALING
IFE TOPS10,<
MOVSI T2,(GJ%OLD) ;PATCH UP THE GTJFN BLOCK
MOVEM T2,INIJFN
>
JRST STFER1 ;TELL USER THAT RECOVERY IS DONE
> ;END FTJOUR
END