Enter your search terms Submit search form
	Web pdp-10.trailing-edge.com

	UNIVERSAL SNUP

;COPYRIGHT (C) 1979,1980 BY DIGITAL EQUIPMENT CORPORATION,
;MAYNARD, MASS.
;
;
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
;ONLY  IN  ACCORDANCE  WITH  THE  TERMS  OF  SUCH LICENSE AND WITH THE
;INCLUSION OF THE ABOVE COPYRIGHT NOTICE.  THIS SOFTWARE OR ANY  OTHER
;COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
;OTHER PERSON.  NO TITLE TO AND OWNERSHIP OF THE  SOFTWARE  IS  HEREBY
;TRANSFERRED.
;
;THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT  NOTICE
;AND  SHOULD  NOT  BE  CONSTRUED  AS A COMMITMENT BY DIGITAL EQUIPMENT
;CORPORATION.
;
;DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY  OF  ITS
;SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.

; Revision history:

;24-Feb-86/WXD	Fix bug in handling extended symbol tables when the
;		symbol table is the last thing in the core image.
;1-Nov-85/WXD	Fix up for extended symbol vectors.
;8-Oct-85/TL	Output symbols when an error is detected.
;Edit #5
;13/OCT/83/TARL	Add version number V.SNUP to help us keep track of SNUP
;		programs which are loaded with which version of SNUP. We
;		will need this in the beginning of 7.03 to track which programs
;		are loaded with old and new sets of ACs.

;  4/06/80/JCH	Do multiply defined symbols right.  Take the global
;		definition over the local, watch for multiply
;		defined locals or globals, and like that.
;
;		Have LOKSEG chuck any high page number returned in
;		T1 so CNVADR will work if the snooper has a high
;		segment.  (LOCK always returns pages of both segments
;		even if only one is LOCKed).

; 10/23/79/JCH	Fancy up DMN's stuff.  Also add the following entries:
;		(All replacements for XCTSNP)
;		XWRSNP - XCTSNP without reducing core
;		REDEFP - Redefine and reinsert user's breakpoints
;		REINSP - Reinsert user's breakpoints

; 10/19/79/DMN	Add symbol offsets to BRKPNT macro.  Also find
;		multiple occurences of a symbol in BRKPNT list.
;		(Can happen when user invokes offset feature).

; 09/28/79/JCH	Do the right thing with multiply-defined symbols.
;		This fixes a number of bugs involving collections
;		of symbols some of which were undefined and some
;		of which were multiply-defined.

;		In REDSYM use P3 to track symbol table location in
;		the monitor .EXE file rather than T2, obeying the
;		conventions about preserved/temporary ACs.

;		Allow multiply-defined symbols if the values
;		are equal.

;		Also handle the obscure but possible case where
;		a symbol is RADIX-50ed in the last word of a page
;		so its value is in the next page, which wasn't
;		in core when it was referenced.  This happens
;		because the program expects INBUFF+1(T1) to be
;		valid whenever INBUFF(T1) is.

;		Fix error messages to use upper and lower case.

;		Do GETTABs and appropriate stuff to find monitor
;		even if it was loaded from an SFD.

;		Fix the loop at CNVADR to use the correct value
;		in P2, so as not to cream the user's code.

;		Add monitor register names with "%" prefix.  Thus,
;		F becomes %F, P is %P, etc.

;		Fix up a number of comments.

;		The net effect of this revision is to increase
;		the size of the locked segment by at most one
;		page.  It also prevents crashes that could have
;		happened because this code wasn't sufficiently
;		defensive.

COMMENT &

	---- KNOWN BUGS AND DEFICIENCIES ----

1.  SNUP will not handle the case where one symbol exists in
    several different modules, but is not gloabal; or when you
    want to use a local symbol which conflicts with a global symbol
    in a different module.  Module specification is not
    yet supported.  It may never be.

2.  Not all possible symbol errors are detected at once.  It may
    require several runs before all errors are detected.

    ---- Fixes are possible but not deemed worth the effort. ----
&

	SUBTTL SNUP -- Subroutines for using the SNOOP. UUO

;	USING THIS PACKAGE
;
;    There are two general modes of operation which for lack of a better
;vocabulary we can call:
;	1. Fault
;	2. Advanced
;The fault mode is easiest to use but is restricted in that breakpoints
;and monitor references are defined at compile-time by the MONREF and
;BRKPNT macros. All you have to do is issue a MONREF for every monitor
;symbol you want to reference and a BRKPNT for every breakpoint you
;want to insert. Following are the instructions for this mode:
;
;	1. Calling program must search UUOSYM and SNUP
;
;	2. If your breakpoint code needs to look at monitor locations,
;	use the MONREF macro for every desired reference other than
;	breakpoint symbols. You may specify more than one symbol in
;	a MONREF if you enclose them in angle-brackets.


;		(THIS MUST BE DONE BEFORE USING THE BRKPNT MACRO)
;		MONREF monitor symbol
;
;	example-MONREF <APRCK0,.CPDWD>	;LOOK AT APRCK0 AND .CPDWD
;
;	3. Tell SNUP where to breakpoint and where to find your code
;		by using the BRKPNT macro.
;		BRKPNT monitor symbol,address of your code
;
;	example-BRKPNT APRCK0,KAFTST ;KAFTST IS BREAKPOINT CODE
;
;
;	4. Your breakpoint code can be inserted anywhere. If you want
;		to reference the monitor locations you specified in
;		MONREF or BRKPNT, you simply go indirect off the symbol.
;		The breakpoint code must also index all
;		memory references by AC3 (containing relocation value).
;
;	example-MOVE 17,@APRCK0(3)	;GET CONTENTS OF APRCK0
;
;	5. Your program must set up P to a push down stack and it should
;		do a RESET
;
;	6. You may then do PUSHJ P,GETINF## to let SNUP define your
;		breakpoints.
;
;	7. Do PUSHJ P,XCTSNP## to insert the breakpoints
;
;	8. Execute the REMBRK macro to remove the breakpoints
;
;	9. Execute the UNDBRK macro to undefine the breakpoints

;	EXAMPLE PROGRAM -- KEEP-ALIVE FAILED FAULT INSERTION
;
REPEAT 0,<

TITLE KAF
	SEARCH UUOSYM,SNUP
	BRKPNT APRCK0,KAFTST
PDL:	BLOCK 50
START:	MOVE P,[-50,PDL]
	TELL	KEEP-ALIVE TEST
	PUSHJ	P,GETINF##		;DEFINE BREAKPOINTS
	PUSHJ	P,XCTSNP##		;INSERT BREAKPOINTS
	TELL	BREAKPOINTS INSERTED -- TYPE CR TO REMOVE
	INCHWL	T1			;WAIT FOR USER TO REMOVE
	REMBRK				;REMOVE THE BREAKPOINTS
	UNDBRK				;AND UNDEFINE THEM
	EXIT				;LEAVE

;ACTUAL BREAKPOINT CODE

KAFTST:	JRST	KAFTST(3)		;JUMP TO SELF (3 HOLDS RELOCATION)
	POPJ	1,			;NEVER EXECUTED BUT FOLLOWS CONVENTION

>;END REPEAT 0

;Advanced mode is for those who want a more generalized method of
;inserting breakpoints. In this mode, breakpoints and monitor references
;are defined at run-time with calls to SETBRK (for setting breaks) and
;GETADR (for finding monitor addresses). To use this mode:
;
;	1. Calling program must search UUOSYM and SNUP
;
;	2. The ADVANC macro must appear somewhere in the calling program.
;	(ADVANC  # possible references, # possible breakpoints)
;	You must not use MONREF or BRKPNT in this mode since either would
;	multiply-define some symbols.
;	Private symbols are BRKBEG,CHKSUM,BRKLST,REFCNT,REFLST.

;	3. To get addresses of monitor locations, call GETADR with
;	    T1 -- positive word count,,address of symbol list
;	   GETADR returns list of addresses corresponding to
;	   symbols (replaces all symbols with addresses).
;
;	4. To set breakpoints, call SETBRK with
;	   T1 -- positive word count,,address of breakpoint list
;	   (breakpoint list is a list of two-word entries)
;		RADIX50 0,symbol
;		Address of breakpoint code

;
;	    SETBRK returns with breaks inserted and caller's list
;		unchanged (also locked in core).

;EXAMPLE PROGRAM USING ADVANCED MODE

REPEAT 0, <
.REQUIRE SNUP
SEARCH UUOSYM,SNUP

	ADVANC 5,^D64		;MAX 5 REFERENCES, 64 BREAKPOINTS
REFS:	RADIX50 0,.CPDWD		;LIST OF REFERENCES NEEDED
	RADIX50 0,.CPCDB
BRKS:	RADIX50 0,APRCK0		;BREAKPOINT LIST (SYMBOL)
	KAFTST		;MY CODE
	RADIX50 0,DIE
	DIETST
	RADIX50 0,PAT
	PATTST

PDL:	BLOCK 50

START:	MOVE	P,[-50,,PDL]
	MOVSI	T1,2			;WORD COUNT
	HRRI	T1,REFS		;ADDRESS OF MY SYMBOLS
	PUSHJ	P,GETADR##		;GO TRANSLATE SYMBOLS TO ADDRESSES
	MOVSI	T1,6		;WORD COUNT
	HRRI	T1,BRKS		;ADDRESS OF MY BREAKPOINT LIST
	PUSHJ	P,SETBRK##	;INSERT MY BREAKPOINTS
	HALT
KAFTST:	JFCL			;MY BREAKPOINT CODE FOR BREAKPOINT 1
	POPJ	1,
DIETST: JFCL			;FOR BREAKPOINT 2
	POPJ	1,
PATTST:	JFCL			;FOR BREAKPOINT 3
	POPJ	1,
	END	START
>;END REPEAT 0

;RULES FOR BREAKPOINT CODE
;
;All memory references must be relocated by AC3. The breakpoint dispatch
;routine in SNUP saves AC 3 and puts the relocation value in it.
;
;All breakpoint routines must end in a POPJ 1, since the dispatch routine
;must restore the original contents of AC3
;
;Don't expect the pushdown stack to be exactly what it was at the time of
;the breakpoint -- The breakpoint dispatch routine is called by a PUSHJ
;and it uses the stack for saving certain things.
;
;Don't insert breakpoints where the monitor may be very deep in a stack
;or doesn't have one set up or is depending on information deeper on
;the stack than where it is.
;
;All monitor memory references must be indirect and indexed by AC3
;and must have been specified via the MONREF or BRKPNT macro.
;
;Don't use monitor AC symbols unless you define them in your calling
;program since they are different from those in SNUP (P in monitor is AC1).

;	INTERNAL DESCRIPTION
;
;This module has five entry points: GETADR, SETBRK, GETINF, XCTBRK,
;and SNPFAL.
;
;GETADR accepts a list of monitor symbols and returns corresponding
;monitor addresses. It does this by calling GETINF. This entry point is
;for advanced mode (not needed for most fault insertion).
;
;SETBRK accepts a breakpoint list and inserts them by calling GETINF and
;XCTBRK. It does not reduce core before locking. This is also an "advanced"
;function.
;
;GETINF converts caller symbols into exec virtual addresses, stores
;the checksum needed in the SNOOP. UUO argument list, and returns
;to the caller. Any errors detected by this routine will result in
;an EXIT.
;
;XCTBRK locks the job in core (low seg only), defines and inserts
;breakpoints, and returns to the caller. Again, any errors 
;result in an EXIT.
;
;SNPFAL is just a print-out routine for SNOOP. failures. It is
;automatically called by the REMBRK and UNDBRK macros found
;here in SNUP.
;
;Removing and undefining breakpoints are the responsibility of
;the caller (using REMBRK and UNDBRK).

;GETINF depends on information being in the following form:
;
;	INTERN BRKBEG,CHKSUM,BRKLST,REFCNT,REFLST
;BRKBEG: n    -- where n is the number of breakpoints
;CHKSUM: Z     -- will be filled in by GETINF (checksum of monitor symbols)
;BRKLST: RADIX50 abc  -- where abc is the symbol where caller wants break
;	routine     -- Address of user breakpoint code
;	........
;	........	(2 word entry for every breakpoint)
;
;Also needed, is the count and list of symbols needed for reference
;purposes by the breakpoint code. This can be anywhere in the caller's
;program.
;
;REFCNT: x   -- where x is count of reference symbols
;REFLST: RADIX50 def -- where def is a reference symbol
;	.........
;	.........
;
;These things can be set up automatically by the caller using the
;BRKPNT and MONREF macros.

;When GETINF returns, all RADIX50 symbols will have been converted to
;exec virtual addresses, BRKBEG will have become an argument count for
;the SNOOP. UUO, and CHKSUM will contain the required monitor symbol
;checksum for snooping.
;
;Now the caller need only call XCTSNP to define and insert the
;breakpoints. Once inserted, the subroutine returns to the caller who
;must then decide when to remove the breakpoints using the .SORBP
;function of SNOOP. Bear in mind that upon return from XCTSNP the job
;is locked in core.

;	DEFINITIONS AND SEARCHES
	SALL

	SEARCH JOBDAT,MACTEN,SCNMAC,UUOSYM

;VERSION DEFINITION
V.SNUP==:6

;AC DEFINITIONS
F=0		;FLAG REGISTER
T1=1
T2=2
T3=3
T4=4
P1=5
P2=6
P3=7	; Keeps track of where we are while reading symbols
P4=10
B=11				; Byte pointers
C=12				; Accumulater
ARG=16
P=17


; Monitor registers used -

%S=0
%P=1
%T1=2
%T2=3
%T3=4
%T4=5
%W=6
%M=7
%U=10
%P1=11
%P2=12
%P3=13
%P4=14
%J=15
%F=16
%R=17


PLEN==100

;	Definitions

; Flags

SYMBEG==400000		; Flag symbols start at odd or even loc
RETRY==1		; Retry for LOCKUUO

; Local maxima

M.BRKN==^D64		; Max # breakpoints we can handle
M.REFN==^D64		; Max # references we can handle

; Other stuff (used in symbol translation)

BP.DEF==1B0		; This symbol has been defined
BP.MUL==1B1		; This symbol is multiply (differently) defined
BP.GLB==1B2		; This value is for a global definition
BP.ALL=17B3		; All flag bits
R50GLB==1B3		; RADIX-50 version of global bit

; Macros used by SNUP and calling program


;	MONREF -- defines list of monitor references needed by caller in
;fault mode. This macro generates storage for the count of references and
;all the symbols requested by it. The funny IF2 is necessary because the
;count of symbols changes during pass 1 and doesn't get reset in
;the calling program.


REPAS2==0		; Pass 2 flag for REFNUM
REFNUM==0
DEFINE MONREF (A),<
  IRP A,<
    IF2,<IFE REPAS2 <
	REFNUM==0
	REPAS2==1>>	;; This allows REFCNT to compile at beginning
	IFE REFNUM,<
		ZZ=.
		REFCNT:: REFNUM
		REFLST::
	>
	A:RADIX50 0,'A
	REFNUM=REFNUM+1
	RELOC ZZ
	REFNUM
	RELOC
>>

;	BRKPNT -- defines a list of breakpoints at compile-time for
;fault mode. Allocates storage for the count of breakpoints, the checksum
;word(required by SNOOP.), and the list of two-word breakpoint entries.
;The funny IF2 is required for the same reason MONREF has it.


BRPAS2==0		; This allows BRKCNT,CHKSUM to compile
BRKCNT==0
DEFINE BRKPNT(A,B,C),<
    IF2 <IFE BRPAS2 <
	 BRKCNT==0
	 BRPAS2=1>>
	IFE BRKCNT,<
		IFE REFNUM,<	;; If no monitor references
			REFCNT::Z ;;  define so no undefineds.
			REFLST::Z
			>
		ZZ=.
		BRKBEG:: BRKCNT
		CHKSUM:: Z
		BRKLST::
	>
    IFB <C>,<
	A: RADIX50 0,'A
	   BYTE(9)0(9)0(18)B
	    >
    IFNB <C>,<
	IF2,<
	ZZZ==C
	IFL <ZZZ>,<ZZZ==-ZZZ>
	IFG <ZZZ-777>,<PRINTX ? Offset too large for BRKPNT macro
		      PRINTX ? -- with arguments A,B,C
							>
	    >
	ZZZ==C&777
	   RADIX50 0,A
	   BYTE(9)0(9)ZZZ(18)B
             >
	BRKCNT=BRKCNT+1
	RELOC ZZ
	BRKCNT
	RELOC
>

;	ADVANC -- Used instead of MONREF and BRKPNT when caller wants
;to control breakpoint and reference functions at run-time. This macro
;simply allocates storage for those functions to avoid undefined
;globals and extra switches in the code.


DEFINE ADVANC (A,B),<
	REFCNT::A		;; Never used really
	REFLST:: BLOCK A	;; Maximum number of references
	BRKBEG:: B
	CHKSUM:: Z
	BRKLST:: BLOCK B	;; Maximum number of breakpoints
>

; Internally called macros

;	Macro to generate table of error messages

	DEFINE E (A), <
		[ASCIZ/A/]
		>


;	Macro to generate error message and exit on fatal errors

	DEFINE FATL (A,SYM), <
		JRST	[OUTSTR [ASCIZ\? A\]
IFNB /SYM/,<
			MOVE T1,SYM
			PUSHJ P,SYMOUT
>
			 EXIT]
	>

;	Macro to send message to TTY with CR/LF

	DEFINE TELL (A), <
		OUTSTR	[ASCIZ\A
\]
	>

; Macros to easily remove breakpoints (called by main program)

	DEFINE REMBRK <
		MOVSI	T1,.SORBP
		SNOOP.	T1,
		  JRST	[OUTSTR [ASCIZ/? Couldn't remove breakpoints/]
			 JRST SNPFAL##]
	>
	DEFINE UNDBRK <
		MOVSI	T1,.SOUBP
		SNOOP.	T1,
		  JRST	[OUTSTR [ASCIZ/? Couldn't undefine breakpoints/]
			 JRST SNPFAL##]
	>

;	Variable storage

OPNBLK:	16		; Open block for disk copy of running monitor
OPNDEV:	BLOCK 3

FILNAM:	Z		; Lookup block for disk copy of monitor
FILEXT:	Z
FILNUL:	Z
FILPPN:	Z
FILPTH:	BLOCK	11

BRKMAX:	Z		; Maximum breakpoints allowed (from GETTAB)

SYMST:	Z		; Start of symbol table in disk copy of monitor
SYMLEN:	Z		; Length of symbol table in disk copy of monitor

BSYMOK:	Z		; Count of breakpoint symbols found in monitor
RSYMOK:	Z		; Count of reference symbols found in monitor

; Symbols required in main program are defined here.

	EXTERN BRKBEG,CHKSUM,BRKLST,REFCNT,REFLST

;	GETADR -- Finds addresses for monitor symbols. Use this if
;you want to control breakpoint insertion at run-time (advanced mode)
;rather than at compile-time(fault mode).
;Symbols to be converted must be in RADIX50  format.

;CALL WITH:
;	T1 -- positive word count,,address of symbol list
;RETURNS:
;	Symbols in specified list converted to addresses

GETADR::HLREM	T1,T3		; Save word count
	JUMPL	T3,[FATL Called GETADR with negative count]
	HRL	T2,T1		; Make BLT pointer
	HRRI	T2,REFLST	; To REFLST
	BLT	T2,REFLST-1(T3)	; Move list of symbols
	MOVEM	T3,REFCNT	; Store count
	SETZM	BRKBEG		; Indicate don't do breaks
	SETZM	BSYMOK		; Bypass that test in GETINF
	PUSH	P,T1		; Save symbol addresses
	PUSHJ	P,GETINF	; Go convert symbols
	POP	P,T1		; Get addresses back
	ADDM	T1,REFCNT	; Make BLT back to caller's area
	HRLI	T1,REFLST
	HRRZ	T2,REFCNT
	BLT	T1,-1(T2)	; Move addresses to caller
	POPJ	P,		; Return to him

;	SETBRK -- Called by main program to insert breakpoints from
;arguments supplied by it. Like GETADR use this entry point only when you
;must control breakpoint initiation at run-time rather than at compile-time.
;
;CALLED WITH:
;	T1 -- positive word count,,address of breakpoint arguments
;RETURNS:
;	Breakpoints inserted

SETBRK::HLREM	T1,T3		; Save word count
	JUMPL	T3,[FATL Called SETBRK with negative word count]
	HRL	T2,T1		; Make BLT pointer to BRKLST
	HRRI	T2,BRKLST
	BLT	T2,BRKLST-1(T3)
	LSH	T3,-1		; Make T3 = # of breakpoints
	MOVEM	T3,BRKBEG
	SETZM	REFCNT		; Prohibit reference symbol finding
	SETZM	RSYMOK		; Bypass that test in GETINF
	PUSHJ	P,GETINF	; Set up SNOOP. UUO info
	PJRST	XWRSNP		; Execute breakpoints without
				; Reducing core.

;	GETINF -- Reads monitor specified by GETTAB as being the
;disk copy of the currently running monitor. Since SNOOP. requires
;the checksum of the symbol table, we do the checksumming while
;finding the virtual addresses for all the breakpoints.

;CALL WITH:
;	No arguments
;RETURNS:
;	Symbol table checksummed
;	Symbols converted to exec virtual addresses
;ERRORS:(ALL FATAL)
;	Too many breakpoints requested
;	Requested symbols not found
;	Too many symbols found (used a local?)


GETINF::PUSHJ	P,FNDFIL	; Read disk copy of mon
	PUSHJ	P,SETSYM	; Get our own copy of BRKLST and REFLST
	PUSHJ	P,REDSYM	; Read and checksum symbols
	PUSHJ	P,FORMIT	; Form the dispatch vector
	MOVE	T1,BRKBEG	; Then check for too many breaks
	CAMLE	T1,BRKMAX
	FATL	Too many breakpoints for this monitor
	LSH	T1,1		; Multiply by 2 (words in entry)
	AOS	T1		; Set to include checksum
	EXCH	T1,BRKBEG	; And save it, get old value to
	PUSHJ	P,INFCHK	; Validate symbols translated OK
	RELEASE			; Don't need .EXE file anymore
	POPJ	P,

; Copy the symbols from user space to our space

SETSYM:	MOVE	T1,BRKBEG	; How many breakpoints
	CAILE	T1,M.BRKN	; Too many?
	FATL	Too many breakpoints for SNUP subroutines
	MOVNS	T1		; -How many breakpoints
	HRLZS	T1		; -N,,0
	SKIPN	T2,T1		; A copy for outputting
	JRST	SETREF		; No breakpoints (unusual)
SBLOOP:	MOVE	T3,BRKLST(T1)	; Get a symbol
	TLZ	T3,(74B5)	; No Flags (we have our own)
	MOVEM	T3,B.OURS(T2)	; Copy over
	ADDI	T1,2		; Past subroutine to call (forget LH)
	AOBJN	T2,SBLOOP	; Continue until done

SETREF:	SKIPN	T1,REFCNT	; Get # of references
	POPJ	P,
	CAILE	T1,M.REFN	; Too many?
	FATL	Too many reference symbols for SNUP subroutine
	MOVNS	T1
	HRLZS	T1
SRLOOP:	MOVE	T2,REFLST(T1)	; Get a symbol
	TLZ	T2,(74B5)	; No flags again
	MOVEM	T2,R.OURS(T1)	; Ship it out
	AOBJN	T1,SRLOOP	; Go thru the list
	POPJ	P,		; Done

; Check consistency of symbols.  All must be found and not
;  multiply-defined.

INFCHK:	JUMPE	T1,INFREF	; Jump if no breakpoints supplied
				;  (for real)
IBLOOP:	SKIPL	T2,B.OURS-1(T1)	; Is it defined?
	FATL	<Undefined breakpoint symbol(s)>,T2
	TXNE	T2,BP.MUL	; Multiply-defined?
	FATL	<Multiply-defined breakpoint symbol(s)>,T2
	SOJG	T1,IBLOOP	; Go thru them all

; Same treatment for reference symbols

INFREF:	SKIPN	T1,REFCNT	; Any references ?
	POPJ	P,		; No references, no work for you
IRLOOP:	SKIPL	T2,R.OURS-1(T1)	; This reference defined?
	FATL	<Undefined MONREF symbol(s)>,T2
	TXNE	T2,BP.MUL	; Multiply-defined?
	FATL	<Multiply-defined MONREF symbols>,T2
	SOJG	T1,IRLOOP	; Loop until done
	POPJ	P,		; Then return

;	SYMOUT -- Output a RADIX50 symbol for an error message
;

SYMOUT:	TLZ	T1,740K		; Clear any flags
SYMOU1:	IDIVI	T1,50		; Get a digit
	HRLM	T2,(P)		; Stack it
	SKIPE	T1		; ...
	 PUSHJ	P,SYMOU1	;
	HLRZ	T1,(P)		; Get next digit
	ADJBP	T1,[POINT 6,RDX50T]	; Point to translated value
	ILDB	T1,T1		; Get SIXBIT
	ADDI	T1," "-' '	; Make ASCII
	OUTCHR	T1		; Output
	POPJ	P,

RDX50T:	SIXBIT	/ 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ.$%/

;	XCTSNP -- Defines and inserts breakpoints according to BRKLST
;		Called by main program with no arguments but with
;		BRKLST set up by a previous call to GETINF.
;		(Entered at XWRSNP in advanced mode)

XCTSNP::MOVEI	T1,LOKEND	; Reduce core
	CORE	T1,
	  TELL	Unable to reduce core but continuing
XWRSNP::PUSHJ	P,LOKSEG	; LOCK in core
	PUSHJ	P,CNVADR	; Go relocate breakpoint code
REDEFP::MOVE	T1,[.SODBP,,BRKBEG]
	SNOOP.	T1,		; Define breakpoints
	  JRST	SNPFAL
REINSP::MOVSI	T1,.SOIBP	; Execute the fault
	SNOOP.	T1,
	  JRST	SNPFAL		; Failed
	POPJ	P,		; Return to caller

;Routine to print an error message corresponding to code in T1
;Called after a SNOOP. error return.

SNPFAL::OUTSTR	[ASCIZ/?SNOOP. failed -- /]
	MOVE	T1,SNPERR(T1)
	OUTSTR	@T1
	EXIT

SNPERR:	E Not an error
	E Illegal argument
	E Not privileged
	E Someone else snooping
	E Exceeded max breakpoints
	E Function illegal when breaks already inserted
	E No monitor free core
	E Address check
	E Illegal if not LOCKed
	E Checksum of running monitor doesn't match disk copy

;	FNDFIL -- Find disk copy of currently running monitor

;CALL WITH:
;	No arguments
;RETURNS:
;	Monitor .EXE file open and directory page in INBUFF
;ERRORS:
;	GETTAB failures (EXIT)
;	Can't OPEN device
;	Can't find file
;	I/O errors

FNDFIL:	MOVX	T1,%CNMBS	; Get structure
	GETTAB	T1,
	  JRST	GTBFAL
	MOVEM	T1,OPNDEV	; Save in OPEN block
	MOVX	T1,%CNMBF	; Get monitor file name
	GETTAB	T1,
	  JRST	GTBFAL
	MOVEM	T1,FILNAM	; Save in LOOKUP block
	MOVX	T1,%CNMBX	; Get file extension
	GETTAB	T1,
	  JRST	GTBFAL
	MOVEM	T1,FILEXT			
	MOVEI	T1,FILPTH
	MOVEM	T1,FILPPN	
	SETZM	FILPTH
	SETZM	FILPTH+1
	MOVX	T1,%CNMBD	; Get PPN
	GETTAB	T1,
	  JRST	GTBFAL
	MOVEM	T1,FILPTH+2

	DEFINE	GSFD(ARG)<IRPC ARG,< ;; Go thru all SFDs that the
	MOVX	T1,%CNSF'ARG		;;  monitor may have come from
	GETTAB	T1,
	  SETZM	T1
	MOVEM	T1,FILPTH+2+ARG>
>
	GSFD	<12345>
	SETZM	FILPTH+2+6
	MOVX	T1,%CNBPM	; Get maximum breakpoints
	GETTAB	T1,
	  JRST	GTBFAL
	MOVEM	T1,BRKMAX	; Save for later
	OPEN	OPNBLK		; See if we can OPEN device
	  FATL	Can't open device where monitor lives
	LOOKUP	FILNAM		; Now LOOKUP the file
	  FATL	Can't find monitor on the disk
        PJRST	REDDIR		; Go read directory and return

GTBFAL:	FATL	GETTAB failed (trying to find disk copy of monitor)

;	REDDIR  -- Reads EXE directory for selected monitor
;		   Won't work if directory gets bigger than one block

;CALL WITH:
;	No arguments
;	.EXE file open on channel zero
;RETURNS:
;	Directory in DIRECT
;ERRORS:(ALL FATAL)
;	I/O errors 
;	Not an .EXE file
;	Directory bigger than one disk block


REDDIR:	USETI	1		; Set to block 1
	IN	[IOWD ^D128,DIRECT
		 0]
	SKIPA	T1,DIRECT	; Success -- get header.
	  FATL	Error reading directory of monitor
	HLRZ	T2,T1		; Get directory header code
	CAIE	T2,1776		; Is it good?
	FATL	Bad .EXE file -- header code not good
	HRRZS	T1		; Get rid of code
	CAILE	T1,^D128	; Is directory too big for program?
	FATL	.EXE directory too big for program
	MOVEM	T1,DIRECT	; No, save it without code
	POPJ	P,		;  and return

;	REDSYM -- Reads entire symbol table from the disk and, while
;checksumming it, searches for matching symbols.

;CALL WITH:
;	Directory in DIRECT
;	File open
;RETURNS:
;	CHKSUM (should match monitor's computation)
;	Symbolic breakpoints converted to virtual addresses


REDSYM:	PUSHJ	P,GETSYM	; Get symbol table
	SETZM	CHKSUM		; Clear checksum
CHKTBL:	ANDI	T1,777		; Use offset for index
	MOVEI	P3,^D512	; Set length of page
	SUB	P3,T1
	MOVNS	P3		; - # of words to read this page
	CAMG	P3,SYMLEN	;  unless not full page of syms
	MOVE	P3,SYMLEN
	HRL	T1,P3		; Make an AOBJN pointer
	PUSHJ	P,SUMSYM	; Checksum the table
	MOVNS	P3		; How many done?
	ADDM	P3,SYMLEN
	SKIPL	SYMLEN		; Done?
	POPJ	P,		; Yes. Return
	PUSHJ	P,NXTSYM	; No.  Get another page
	JRST	CHKTBL		;  and process it

;	GETSYM -- reads the first symbol table page
;CALL WITH:
;	No arguments
;RETURNS:
;	First symbol table page in INBUFF
;	odd/even start flag set (so we know which is symbol in pair)
;	Start address of symbol table
;	Length of symbol table

GETSYM:	MOVEI	T1,.JBSYM	; Get pointer from file
	PUSHJ	P,FNDVIR
	JUMPLE	T2,[HLREM  T2,SYMLEN	; If old style symbol pointer then
		    HRRZM  T2,SYMST	;  save length and start of table
		    JRST   GOTSYM]	; Continue
	PUSH	P,P1		; Save P1
	PUSH	P,P2		; and P2
	MOVE	P2,T2		; Save address of extended symbol vector
	MOVE	T1,P2		; Get address of symbol vector
	ADDI	T1,.SYCNT	; Fetch symbol vector count word
	PUSHJ	P,FNDVIR	; ...
	SUBI	T2,1		; Account for word just read
	ADDI	P2,1		; ...
	IDIVI	T2,.SYSTL	; Compute sub-entry count of symbol vector
	SKIPA	P1,T2		; Save sub-entry count in P1 and enter loop
GETSY1:	ADDI	P2,.SYSTL	; Adjust vector address to next sub-entry
	SOJL	P1,GETSY2	; Quit at end of symbol vector
	MOVE	T1,P2		; Get sub-entry address
	ADDI	T1,.SYTYP	; Fetch sub-entry type word
	PUSHJ	P,FNDVIR	; ...
	LDB	T1,[POINTR (T2,SY.TYP)] ; Get sub-entry type code
	CAIE	T1,.SYR5D	; Is this the RADIX-50 defined symbol table?
	JRST	GETSY1		; No, loop back to check next sub-entry
	LDB	T1,[POINTR (T2,SY.LEN)] ; Get length of symbol table
	MOVNM	T1,SYMLEN	; Save negative length for later
	MOVE	T1,P2		; Get sub-entry address
	ADDI	T1,.SYADR	; Fetch sub-entry symbol table address word
	PUSHJ	P,FNDVIR	; ...
	MOVEM	T2,SYMST	; Save for later
GETSY2:	POP	P,P2		; Restore P2
	POP	P,P1		; And P1
GOTSYM:	MOVE	T2,SYMST	; Get starting address of symbol table
	TRNN	T2,1		; Starting at odd location?
	TLZA	F,SYMBEG	; No.  Flag start at even
	TLO	F,SYMBEG	; Yes.  Flag odd
	MOVE	T1,SYMST
	PJRST	FNDVIR		; Read first symbol table page

;	NXTSYM -- reads next symbol table page
;CALL WITH:
;	SYMST pointing to last page read (virtual)
;RETURNS:
;	Next page in INBUFF
;	Symst pointing to new page (virtual address)

NXTSYM:	MOVE	T1,SYMST	; Get last page
	ADDI	T1,1000		; Increment it
	TRZ	T1,777		; Get rid of any offset
	MOVEM	T1,SYMST	; Save for next time
;;;     PJRST	FNDVIR		; Read it and return

;	FNDVIR -- Find a word in an .EXE file

;CALL WITH:
;	T1 -- Virtual address you want the contents of
;	   -- Channel 0 open to the disk file
;	   -- Directory for file in DIRECT
;RETURNS:
;	T1 -- -1 if page was not read because it was allocated but zero
;		or the virtual address if the page was read into INBUFF
;	T2 -- Contains the contents of the desired virtual address
;ERRORS:
;	(ALL FATAL)
;	1.  EOF while reading directory page
;	2.  Bad .EXE file (directory wrong)
;	3.  Desired address not in the directory
;	4.  EOF reached before desired address found

FNDVIR:	PUSH	P,T1		; Save virtual address desired
	LSH	T1,-^D9		; Just look at page
	MOVEI	T4,1		; Initialize buffer index
	MOVE	C,DIRECT	; Get word count of directory
FNDLUP:	SUBI	C,2		; Decrement directory count
	SKIPG	C		; Still have entries?
	FATL	Desired address not in .EXE file
	AOS	T4		; Point to virtual page
	LDB	T2,[POINT 9,DIRECT(T4),8]	; Get repeat count 
	HRRZ	T3,DIRECT(T4)	;  and first page in group
	ADD	T2,T3		; Make last page in range
	CAMG	T1,T2		; Desired page in range?
	CAMGE	T1,T3
	AOJA	T4,FNDLUP	; No.  Keep trying.
	SUB	T1,T3		; Yes.  Find offset from page 1
	HRRZ	T2,DIRECT-1(T4)	; Now get file page #
	JUMPE	T2,NOTALC	; Return zero if not allocated
	ADD	T1,T2		; Find file page to read
	PUSHJ	P,RDPAGE	; Go read it
	  FATL	EOF before address found	;If directory is wrong
	MOVE	T1,(P)		; Get desired address back
	ANDI	T1,777		; Just the offset
	SKIPA	T2,INBUFF(T1)	; Get desired word
NOTALC:	SETOM	(P)		; Flag page not in file
	POP	P,T1		; Get virtual address back
	POPJ	P,		;  and go away

;	RDPAGE -- Read a selected page from an .EXE file

;CALL:
;	T1 -- CONTAINS PAGE NUMBER TO READ
;	     -- CHANNEL 0 OPEN TO AN EXE FILE
;RETURNS:
;	T1 -- FIRST BLOCK READ
;	INBUFF -- THE PAGE READ FROM DISK
;	NON-SKIP -- EOF WAS ENCOUNTERED
;	SKIP -- PAGE WAS SUCCESSFULLY READ
;ERRORS:
;	FATAL -- ANY I/O ERROR DURING THE READ

RDPAGE:	LSH	T1,2		;MAKE PAGE A BLOCK #
	USETI	1(T1)		;SET TO FIRST BLOCK IN PAGE
	IN	[IOWD ^D<512+128>,INBUFF
		 0]
	  JRST	RDPAG1		;SUCCESSFULLY READ A PAGE
	STATO	IO.EOF		;GET AN EOF?
	  FATL	I/O error reading .EXE file
	USETI	1(T1)		;SET UP TO FIRST BLOCK IN PAGE AGAIN
	IN	[IOWD ^D512,INBUFF
		 0]		;TRY TO READ JUST THE SINGLE PAGE
RDPAG1:	  AOSA	(P)		;SUCCESSFULLY READ A PAGE
	STATZ	IO.EOF		;GET AN EOF?
	  POPJ	P,		;YES, NON-SKIP RETURN
	FATL	I/O error reading .EXE file

;	SUMSYM -- Checksums monitor symbol table and calls CMPCHK to see
;		  if each symbol may be one we're looking for.
; Call with:
;	Symbol table page in INBUFF
;	T1 containing AOBJ pointer to symbols in INBUFF
; Returns:
;	Current page checksummed
;	Symbols in BRKLST and REFLST converted to addresses

SUMSYM:	MOVE	T3,INBUFF(T1)	; Get a symbol table word
	EXCH	T3,CHKSUM	; Checksum it
	ROT	T3,1
	ADD	T3,CHKSUM
	EXCH	T3,CHKSUM
	PUSHJ	P,CMPCHK	; See if time to compare syms
	AOBJN	T1,SUMSYM	; Loop thru page
	POPJ	P,		; Then get out

CMPCHK:	TRNE	T1,1		; Odd location?
	JUMPL	F,COMSYM	; Yes. if odd first,compare sym
	TRNN	T1,1		; Even location?
	JUMPGE	F,COMSYM	; Yes. if even first, compare sym
	POPJ	P,		; Not a symbol. no compare.

COMSYM:	MOVE	C,INBUFF(T1)	; Save symbol for compare
	MOVE	T2,C		;  in case of multiple defns.
	TXZ	T2,BP.ALL	; This symbol is nothing (yet)
	TXNE	C,R50GLB	; Is it global?
	TXO	T2,BP.GLB	; Yes, light magic bit
	MOVEM	T2,NEWSYM	; Save that symbol!
	MOVE	P1,BRKBEG	; Prepare to check breaks
COMLUP:	MOVE	P2,P1
	LSH	P2,1
	MOVE	T3,B.OURS-1(P1)	; Get the symbol
	MOVEM	T3,OLDSYM	; Save as OLDSYM
	XOR	T3,C		; Compare versus this one
	TXZ	T3,BP.ALL	; Skip flag bits
	JUMPN	T3,NOMTCH	; No match

; Match !

	MOVE	T2,INBUFF+1(T1)	; Get the value
	MOVEM	T2,NEWVAL	; Call it NEWVAL
	SKIPL	B.OURS-1(P1)	; Already defined?
	JRST	SETNEW		; No, just set it up

; Falls thru to next page ...

; Falls in from last page ...

; Symbol is already defined!  See about conflicts, etc.

	MOVE	T2,BRKLST-2(P2)	; Get what will now be
	MOVEM	T2,OLDVAL	;  OLDVAL, too
	PUSHJ	P,MULTCH	; See about multiples
SETNEW:	MOVE	T2,NEWVAL	; Get new value
	MOVEM	T2,BRKLST-2(P2)	; Save it
	MOVE	T2,NEWSYM	; Get new symbol
	TXO	T2,BP.DEF	; It is now defined
	MOVEM	T2,B.OURS-1(P1)	; Save it, too

NOMTCH:	SOJG	P1,COMLUP	; Loop until done

	SKIPN	P1,REFCNT	; Any references?
	POPJ	P,		; No references, no work
RXLOOP:	MOVE	T3,R.OURS-1(P1)	; Get a symbol
	MOVEM	T3,OLDSYM	; Save as OLDSYM
	XOR	T3,C		; Mix it up a little
	TXZ	T3,BP.ALL	; Skip flag bits
	JUMPN	T3,RXCONT	; Found a match?

	MOVE	T3,INBUFF+1(T1)	; Yes -- get the value and
	MOVEM	T3,NEWVAL	; Save it as NEWVAL for now
	SKIPL	R.OURS-1(P1)	; Already defined?
	JRST	REFNEW		; No, use this value

; Symbol is already defined!  See about conflicts, etc.

	MOVE	T2,REFLST-1(P1)	; Get the old value and
	MOVEM	T2,OLDVAL	;  save for comparison
	PUSHJ	P,MULTCH	; Set up [NEWSYM,NEWVAL]
REFNEW:	MOVE	T2,NEWVAL	; Take returned stuff (even if
	MOVEM	T2,REFLST-1(P1)	;  same value as before)
	MOVE	T2,NEWSYM	; Get the symbol (NEW or OLD)
	TXO	T2,BP.DEF	; Make it defined
	MOVEM	T2,R.OURS-1(P1)	;  in our flag area
RXCONT:	SOJG	P1,RXLOOP	; Loop thru our symbols
	POPJ	P,		; Done scanning symbols, return

; Special logic to see what to do with multiply-defined symbols.
; Enter with [OLDSYM,OLDVAL] containing (our) symbol+flags, value
;  pair and likewise for [NEWSYM,NEWVAL].  To be honest, this is
;  an edit and rather than polish every machine cycle I'm just
;  going to come up with a usable interface.  You other hackers
;  out there can do it right yourselves.

; Returns information to use in [NEWSYM,NEWVAL]

MULTCH:	PUSH	P,T1		; T1 points to disk buffer (!)
	PUSHJ	P,BMNOIL	; Go check it out
	POP	P,T1		; Restore "preserved temporary"
	POPJ	P,		;  and return

BMNOIL:	MOVX	T2,BP.GLB	; A useful flag
	MOVE	T1,OLDVAL	; Get OLDVAL
	CAMN	T1,NEWVAL	; Are values same?
	JRST	CHKGLB		; Yes, see if its now global
	TDNN	T2,OLDSYM	; Different values.  Is old global?
	JRST	OLDLOC		; Old is local.  Check new.
	TDNE	T2,NEWSYM	; Old is global.  Is new too?
	JRST	SETMUL		; Yep--some jerk has a muldefglb!
	MOVEM	T1,NEWVAL	; Nope.  Use old value-its global
	MOVE	T1,OLDSYM	; Return value (OLDSYM) in NEWSYM
	MOVEM	T1,NEWSYM	;  ...
	POPJ	P,		; And finally return

OLDLOC:	TDNN	T2,NEWSYM	; Old is local.  Is new?
	JRST	SETMUL		; Yep.  Multiply-defined locals
	JRST	SETOKG		; New is global.  Use [NEWVAL,NEWSYM]

CHKGLB:	TDNN	T2,OLDSYM	; Values equal.  Old one global?
	POPJ	P,		; No-use [NEWSYM,NEWVAL]
SETOKG:	MOVX	T2,BP.DEF!BP.GLB; Set new symbol to be global
	IORM	T2,NEWSYM	;  and defined.
	MOVX	T2,BP.MUL	;  and clear any multiples that
	ANDCAM	T2,NEWSYM	;  happen to be around
	POPJ	P,		;  happy, return

SETMUL:	MOVX	T2,BP.DEF!BP.MUL; Make this multiply-defined
	IORM	T2,NEWSYM	; in NEWSYM
	POPJ	P,		; Unhappy, return

;	FORMIT -- After symbols have been translated, come here
; to convert breakpoint symbol to virtual address, and set up
; breakpoint dispatch table.
; Call with:
;	BRKLST values set up
; Returns:
;	BRKLST dispatch instructions set up

FORMIT:	SKIPN	P1,BRKBEG	; Number of breakpoints in P1
	POPJ	P,		; ??? No breakpoints, no work
FORMLP:	MOVE	P2,P1		; For indexing into BRKLST
	LSH	P2,1		;  we count P2 = P1 pairs
	HLRZ	C,BRKLST-1(P2)	; Get offset in bits 27-35
	LSH	C,^D27		; Allow for negative offsets
	ASH	C,-^D27		; There we go
	ADDM	C,BRKLST-2(P2)	; Form monitor virtual address
	HRRZ	C,BRKLST-1(P2)	; Get code to execute
	MOVEM	C,BRKDSP(P1)	; Save it in dispatch list
	MOVEI	C,DSPIDX(P1)	; Pick up dispatch address
	HRLI	C,(PUSHJ %P,0)	; Form instruction
	MOVEM	C,BRKLST-1(P2)	; And save it for SNOOP.
	SOJG	P1,FORMLP	; Go do next one
	POPJ	P,		; And return

;	LOKSEG -- LOCKs low segment into contiguous EVM

;Call: (no arguments)
;Returns:
;	-- Low segment LOCKed in core
;Errors: (all fatal)


LOKERR:	E LOCK not implemented
	E no LOCK privilege
	E If LOCKed couldn't run largest existing job
	E If LOCKed couldn't guarantee cormin
	E No room in EVM
	E Illegal subfunction
	E Page unavailable
	E Tried to LOCK again in an illegal way

LOKSEG:	TRZ	F,RETRY		; Init retry flag
LOKSE1:	MOVEI	T1,LK.LNP+LK.LLS; Set up LOCK bits
	LOCK	T1,		; Attempt to lock
	  SKIPA	T2,LOKERR(T1)	; Failed. Get message
	POPJ	P,		; Success. Exit.
	CAIL	T1,2		; Possible to recover?
	CAILE	T1,4
	SKIPA			; No.
	TRCE	F,RETRY			
	JRST	[OUTSTR @T2	; Can't recover
		 EXIT]
	MOVEI	T1,5		; Try again after 5 seconds
	SLEEP	T1,
	JRST	LOKSE1

;	CNVADR -- Relocates breakpoint dispatch code and addresses
;This is necessary because when a breakpoint happens, mapping is through
;the EBR and the code is still user virtual memory.
;CALL WITH:
;	T1 -- Exec virtual page of our program
;Returns:
;	All necessary locations relocated to exec virtual addresses

CNVADR:	TLZ	T1,-1		; Ignore any high seg page number
	LSH	T1,^D9		; Make page an address
	MOVEM	T1,EVBASE	; Save it for breakpoint dispatch code
	MOVEI	T2,<2*M.BRKN>	; Set to relocate tables
CNVLUP:	ADDM	T1,DSPADR(T2)	; Relocate a table word
	SOJGE	T2,CNVLUP	; Until done
	ADDM	T1,IDXCHG	; Relocate reference instruction
	ADDM	T1,EVGET	; Reloc get-EVA-base instruction
	MOVE	P1,BRKBEG	; Now change breakpoint instructions
	SUBI	P1,1		; Convert back from SNOOP. argument
	LSH	P1,-1		;  length to number of breakpoints.
CNVBRK:	MOVE	P2,P1		; Next breakpoint
	LSH	P2,1		; Account for 2-word entry
	ADDM	T1,BRKLST-1(P2)	; Relocate
	SOJG	P1,CNVBRK	; Do all breakpoints
	POPJ	P,		; and return

;	BREAKPOINT DISPATCH AREA -- ALL BREAKPOINTS COME HERE FIRST

EVBASE:	Z				;RELOCATION SAVED BY LOCK RETURN

;The following list of PUSHJs are to tell GETREL where to go. 
;Relocate DSPADR to end of DSPIDX plus IDXCHG and EVGET.
DSPADR:	BRKDSP

BRKDSP:	BLOCK M.BRKN			;BREAKPOINT CODE DISPATCH TABLE
DSPIDX:	REPEAT M.BRKN,<
	PUSHJ	1,GETREL
	>

;	GETREL -- The breakpoint dispatch routine executed first by all
;breakpoints. It saves AC3 and sets it to the relocation value
;before going off to the user breakpoint code. When
;the fault code returns, AC3 is restored and a skip-return from
;the user code will be propagated back to the monitor.


GETREL:	EXCH	3,(1)			;GET CALL. SAVE AC
IDXCHG:	SUBI	3,DSPIDX+1		;GET ADDRESS TABLE INDEX
	HRLI	3,20			;SET INDIRECT BIT
EVGET:	PUSH	1,EVBASE		;SAVE RELOCATION
	EXCH	3,(1)			;GET RELOCATION. SAVE INDEX
	PUSH	1,DSPADR(3)		;SAVE RELOCATED DISPATCH ADDRESS
	EXCH	3,(1)			;SAVE BASE. GET DISPATCH
	ADDM	3,-1(1)			;ADD RELOCATED DISPATCH TO INDEX
	POP	1,3			;GET BASE FOR USER CODE
	PUSHJ	1,@(1)			;GO TO USER CODE
	CAIA				;NON-SKIP RETURN
	AOS	-2(1)			;PROPAGATE SKIP-RETURN
	POP	1,(1)			;REMOVE DISPATCH
	POP	1,3			;RESTORE ORIGINAL MONITOR AC
	POPJ	1,			;RETURN TO MONTIOR

	XLIST
	LIT
	LIST
LOKEND:	Z				;LAST LOCATION BEFORE CORE REDUCTION

; Storage for symbols supplied by user (MONREF/BRKPNT).


B.OURS:	BLOCK	M.BRKN	; Breakpoints
R.OURS:	BLOCK	M.REFN	; References
OLDSYM:	BLOCK	1
OLDVAL:	BLOCK	1
NEWSYM:	BLOCK	1
NEWVAL:	BLOCK	1
ENDCAM==.		; End of our symbol area

;Page buffer and directory buffer for disk copy of monitor. This
;portion is given up prior to locking the job in core since it is
;only used to get the symbol table.
;(In advanced mode, core not given up since caller may need it)


DIRECT:	BLOCK	^D128		; Directory goes here
INBUFF:	BLOCK	^D512		; EXE file pages go here
	BLOCK	^D128		; What a crock.  See revision
				;  history for the explanation.
	END