Trailing-Edge
-
PDP-10 Archives
-
BB-H138C-BM
-
galaxy-sources/opr.mac
There are 37 other files named opr.mac in the archive. Click here to see a list.
TITLE OPR -- Parser Routines for ORION
SUBTTL B. Hardy, C. Romash & M. Berkowitz 5-Nov-79/PJT
;
;
; COPYRIGHT (c) 1975,1976,1977,1978,1979
; DIGITAL EQUIPMENT CORPORATION
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
; AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS
; SOFTWARE OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
; OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE TO
; AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE
; WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
; BY DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
; OF ITS SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY
; DIGITAL.
SEARCH GLXMAC
.directive flblst
PROLOG (OPR)
SEARCH ORNMAC
EXTERNAL PAREDT,CMDEDT
OPRWHO==0
OPRVER==4
OPRMIN==0
OPREDT==122
%%.OPV==<VRSN.(OPR)>+CMDEDT+PAREDT
.JBVER==137
LOC .JBVER
EXP %%.OPV
RELOC
SUBTTL Table of Contents
; TABLE OF CONTENTS FOR OPR
;
;
; SECTION PAGE
; 1. B. Hardy, C. Romash & M. Berkowitz 30-Aug-79.............. 1
; 2. Table of Contents......................................... 2
; 3. Revision History.......................................... 3
; 4. SPECIAL ACCUMULATOR ASSIGNMENTS........................... 4
; 5. OPR IMPURE DATA........................................... 5
; 6. CONSTANT AND STORAGE DEFINITIONS.......................... 6
; 7. TABLE BUILDING DATA BASE.................................. 7
; 8. Main Entry -- Initialization............................ 8
; 9. MAIN MAIN LOOP IN OPR.................................. 9
; 10. TAKEND END OF TAKE COMMAND............................... 10
; 11. DSPCMD DISPLAY TAKE FILE COMMANDS IF DESIRED............. 11
; 12. PRCMSG PROCESS IPCF MESSAGE ROUTINE...................... 12
; 13. VALMSG VALIDATE THE MESSAGE FROM ORION................... 12
; 14. ACKOPR OUTPUT GALAXY TEXT MESSAGE........................ 13
; 15. DSPOPD PROCESS DISPLAY MESSAGE FROM ORION................ 14
; 16. SHWDSP PROCESS DISPLAY MESSAGE FROM ORION................ 15
; 17. TABSET SETUP TABLES FOR PARSER CALL...................... 16
; 18. Software Interrupt System Routines........................ 17
; 19. COMMAND AND APPLICATION ACTION ROUTINES................... 18
; 20. ENTER AND RETURN COMMANDS................................. 19
; 21. EXIT COMMAND TABLES....................................... 20
; 22. TAKOPR ROUTINE............................................ 21
; 23. WAIOPR ROUTINE............................................ 22
; 24. SETRTN AND SETTRM TERMINAL SET ROUTINES................... 23
; 25. ESCAPE Sequence Table for Operator Terminals.............. 24
; 26. SHWDAY SHOW DAYTIME ACTION ROUTINE....................... 26
; 27. OPRRMT REMOTE OPR ENTRY POINT............................ 27
; 28. WAITCN WAIT FOR OUTPUT LINK CONNECT...................... 28
; 29. REMSET SETUP OPR LINKS................................... 29
; 30. SETOUT SETUP OUTPUT OF DATA.............................. 30
; 31. SNDOUT SEND OUTPUT OVER THE LINK......................... 30
; 32. OUTRTN OUTPUT ROUTINE FOR LINKS.......................... 30
; 33. SETPTR SETUP POINTERS FOR OUTPUT......................... 30
; 34. INPINT INPUT OVER LINK INTERRUPT......................... 31
; 35. OUTINT OUTPUT LINK CONNECTED............................. 31
; 36. IPCRMT IPCF INTERRUPT ROUTINE FOR REMOTE OPR............. 31
; 37. INPDAT INPUT THE DATA FROM LINK.......................... 32
; 38. CONNEC PROCESS CONNECT MESSAGE........................... 33
; 39. TXTLIN CHECK IF MULTIPLE LINE INPUT ALLOWED.............. 34
; 40. SETFAL SEND A SETUP FAILURE FOR OPR ERRORS............... 35
; 41. PUSHRT ROUTINE TO PUSH FOR THE -20....................... 36
; 42. TERMFK FORK TERMINATION INTERRUPT CODE................... 37
; 43. OPRSON OPR SIGNON TO ORION............................... 38
; 44. OPRRST OPR REPLY TO SETUP................................ 39
; 45. SETREP SETUP REPLY MESSAGE............................... 40
; 46. SETMES SETUP MESSAGE REPLY............................... 41
; 47. TABCHK ROUTINE TO CHECK OUT TABLES....................... 42
; 48. GETLOC GET OPRS LOCATION................................. 43
SUBTTL Revision History
COMMENT \
Edit Module When Change
1 OPR 31-May-77 First Development version on SYS (TOPS20)
2 OPR 1-Jun-77 Add code to handle WRITE-TO-OPR messages.
3 OPR 5-Jun-77 Add code to handle JFN's properly and
to fill in defaults.
4 OPR 7-Jun-77 Convert to new initialization to use
new GLXLIB.
5 OPR 14-Jun-77 Change .CMNUM and .CMNUX to save full words
rather than half words
6 OPR 17-Jun-77 Implement TAKE Command.
7 OPR 24-Jun-77 Change to use GALAXY TEXT message for acknowledgement
10 OPR 27-Jun-77 Fix SAVFIL to correctly save an FD.
11 OPR 30-Jun-77 Add PR.INF to save radix on number type fields
12 OPR 12-July-77 Clean up error handling
13 OPR 12-July-77 Make WTO with no object type work
14 OPR 26-Aug-77 Don't include generation number in filespec
for output
15 OPR 20-Sept-77 Make this be version 2
16 OPR 22-July-77 Add interrupt system for TOPS10
17 OPR 8-August-77 Convert to use GLXSCN on both TOPS10 and
TOPS20
20 OPR 19-August-77 Make SAVTOK work correctly
21 OPR 19-August-77 Make all negative numbers illegal
22 OPR 19-August-77 Remove Edit 15 which was a Release 3 only hack
23 OPR 19-August-77 Fix ill mem ref as a result of undefined
results in S2 from COMND
24 OPR 21-September-77 Complete changes to usd GLXSCN
25 OPR 22-September-77 Make TAKE command work on TOPS10
26 OPR 26-Sep-77 Don't reset INCMIN until entire command has
been processed.
27 OPR 11-Oct-77 Add SET TERMINAL command. Also add global
flag NOSND to indicate no message should be
sent to ORION for this command
30 OPR 19-Oct-77 Add SET TERMINAL MESSAGES and
SET TERMINAL NODE commands.
31 OPR 21-Oct-77 Fix race in message processing- don't
change pc if we are already processing messages
32 OPR 10-Nov-77 Add file spec defaults for TOPS-10
33 OPR 11-Nov-77 Add neww terminal types Keypad VT52 and VT50
34 OPR 11-Nov-77 Add new Operator Display Message to allow
multiple WTO's in one display message
35 OPR 13-Nov-77 Make DSPOPR routine process
multiple WTO's in one display message
36 OPR 18-Nov-77 Add code for multiple line RESPOND
37 OPR 18-Nov-77 Add code for SHOW DAYTIME
40 OPR 23-Nov-77 Change BLDCOM to use symbols for COMMAND message
41 OPR 2-Dec-77 Add code for multiple line SEND and multiple
line explanation for CANCEL
42 OPR 6-Dec-77 Add code to include text of command in COMMAND
message.
43 OPR 4-Jan-78 Support switch delete code in OPRTAB
44 OPR 17-Jan-78 Make sure all text is passed in message
45 OPR 2-Feb-78 Add new Display,WTO,WTOR,Ack message
processing
46 OPR 10-Feb-78 Add FLAG AC and fix up WTO,WTOR,ACK
47 OPR 18-April-78 Remove the Parser from OPR and make OPRPAR
50 OPR 12-June-78 Remove the display routines and use K%SOUT
51 OPR 20-June-78 Fix OPR Interrupt code with K%TPOS and
S%EXIT
52 OPR 28-Jun-78 Move DSPTAK, OPRTAK, and PRMTSZ to
OPRPAR
53 OPR 15-Jul-78 Remove all .REQUIRE Statements so they
may be moved to OPR.CMD
54 OPR 20-July-78 Fix OPRSON to display errors and exit
55 OPR 1-Aug-78 Add Counter to cleanup Core in OPR since
Page Fault Handler might take to long
56 OPR 2-Aug-78 Remove the "CURRENT DATE AND TIME"
text from SHWDAY.
57 OPR 3-Aug-78 Eliminate the text "ERROR:" from all
error messages and replace it with
"<CRLF>?". The effected label is MAIN.6.
60 OPR 16-Aug-78 Add support for NCP and correct ADJBP
61 OPR 31-Aug-78 Add SHOW Message display for QUASAR
62 OPR 5-Sept-78 Add EXIT command
63 OPR 8-Sept-78 Add P.ENDT for end of Take File
Also have PARSER CLOSE UNUSED JFNS ON -20
64 OPR 12-Sept-78 Move TXTINP and GETTXT to OPRPAR
65 OPR 29-Sept-78 Remove MSGCNT for releasing up Memory since
Library will take care of it.
66 OPR 23-Oct-78 Add TABAPL macro to get Application names
and symbols
67 OPR 9-Nov-78 Have EXIT use I%EXIT to terminate
70 OPR 30-Nov-78 Add new form of OPR hello message to ORION
71 OPR 4-Dec-78 Have EXIT use $HALT to enable Continue to work
72 OPR 19-Dec-78 Add DN200 code and OPRRMT as reenter address
73 OPR 21-Dec-78 Change to let superior IIC on Data Interrupts
for DN200
74 OPR 2-Jan-79 Add Link Status Checks for DN200 Input
to check for more data
75 OPR 5-Jan-79 Convert KEYTAB to ORNDSP Macro to be compatible
with standard PARUNV
76 OPR 5-Jan-79 Add TXTLIN to OPR to check if Multiple Line
Input allowed before calling TXTINP
77 OPR 8-Jan-79 Convert to new GLXLIB and $STOP taking ITEXT
100 OPR 10-Jan-79 Add OP.RMT to flags word for Remote Operator
on the -20.
AND GET CURRENT LOCATION ON THE -20 BEFORE HELLO
101 OPR 18-Jan-79 Add OPR HELP Command Action Support and create
NOPROC to mark no processing in the message
102 OPR 24-Jan-79 Add null to text from Network after SINR
103 OPR 26-JAN-79 CONVERT TO .REQUIRE FOR APPLICATION TABLES
104 OPR 23-Feb-79 Add Timer Trap for OPR wakeup as well as
P$INIT support. Use P$INTR at INT:
105 OPR 27-Feb-79 Support to output Prompt if displayed something
on interrupt breakout
Also Send Message to ORION on Take End
106 OPR 5-Mar-79 Add P$NPRO to set no Processing in Parser Return
Flags
Add PUSH Command Support
107 OPR 15-Mar-79 Clear Interrupt System on -20 to Remove IPCF
Interrupt from SIGNON Dialog
110 OPR 6-Apr-79 Add TAKOPR routine to check if TAKE commands
are allowed, also clear OPRs Data base on start
111 OPR 8-Apr-79 Check ENTER Command for Remote Operators
Pitch Short NSP Messages (less than or equal to
2)
These were just cr,lf
112 OPR 19-Apr-79 Remove terminal type keys. Parse directly into
ORNMAC .TTxxx codes suitable for K%STYP.
OPRCMD
113 OPR 15-May-79 Add MSGCNT to keep track if there were any
messages received
114 OPR 30-May-79 Add WAIT command to Application alternate Tables
115 OPR 4-Jun-79 Change SETFAL to add a null to the end of the
message instead of ^A.
116 OPR 21-Jun-79 Remove the CMDBLK as External reference and use
PRT.CF for the field.
117 OPR 6-Jul-79 Make the WAIT command invisible
120 OPR 11-Jul-79 Trap Error on EPCAP for the PUSH command incase
ACJ won't allow it.
121 OPR 25-Jul-79 Fix the -20 DN200 OPR to check for MO%CON to
insure that the link is still around
122 OPR 30-Aug-79 Add new KEYTAB entries for the -10
\
SUBTTL SPECIAL ACCUMULATOR ASSIGNMENTS
MD==15 ;MESSAGE FOR DISPLAY ADDRESS
M==16
FLAG==14 ;FLAG AC FOR OPR
;FLAG DEFINITIONS FOR OPR
O.ACKP==1B0 ;ACK MESSAGE BEING PROCESSED
O.LAST==1B1 ;LAST LINE OF MESSAGE
O.ERRP==1B2 ;ERROR PROCESSING OF MESSAGE
O.DSPM==1B3 ;DISPLAY MESSAGE SENT
SUBTTL OPR IMPURE DATA
OPRDAT:
DEFTAB: BLOCK 1 ;ADDRESS OF TABLES BEING USED
HDRTAB: BLOCK 1 ;MAIN TABLE SETTING
HDRPMT: BLOCK 10 ;PROMPT FOR APPLICATION
CMDDAT: BLOCK 1 ;COMND DATA COLLECTED IN PARSE
ENTCOD: BLOCK 1 ;CODE OF THE TABLE TYPE
TABCOD: BLOCK 1 ;CODE FOR APPLICATION TYPE
MYNODE: BLOCK 1 ;NODE OF THIS OPR
;STORAGE FOR PARSER TO EVENT PROCESSOR COMMUNICATION
PARBLK: BLOCK PAR.SZ ;SPACE FOR PARSER CALL ARGUMENTS
;STORAGE FOR DISPLAY PROCESSING
DSPPTR: BLOCK 1 ;DESTINATION DISPLAY POINTER
SRCPTR: BLOCK 1 ;SOURCE POINTER
DSPFLG: BLOCK 1 ;DISPLAY BLOCK FLAGS
TEMOUT: BLOCK ^D20 ;LEAVE ROOM FOR A LINE
REMOPR: BLOCK 1 ;REMOTE OPERATOR IN USE FLAG
REMACC: BLOCK 1 ;REMOTE ACCESS (NSP ON -20)
TEMPTR: BLOCK 1 ;TEMPORARY POINTER FOR TEXT
HOSTNM: BLOCK 1 ;HOST NAME FOR OPR
ERRCOD: BLOCK 1 ;ERROR CODE FOR OPR ERRORS
INTDSP: BLOCK 1 ;INTERRUPT DISPLAY FLAG
MSGCNT: BLOCK 1 ;COUNT OF IPCF MESSAGES ON WAKEUP
TAKFLG: BLOCK 1 ;TAKE COMMAND FLAG
ARG1: BLOCK 1 ;ARGUMENT FOR ERROR PROCESSING
TOPS20 <
DCNDAT: BLOCK 5 ;BLOCK FOR TASK CONNECT NAME
INPJFN: BLOCK 1 ;LINK INPUT JFN
OUTJFN: BLOCK 1 ;LINK OUTPUT JFN
BUFADR: BLOCK 1 ;BUFFER ADDRESS FOR OUTPUT
OUTPTR: BLOCK 1 ;POINTER FOR OUTPUT TO LINK
OUTCNT: BLOCK 1 ;COUNT FOR OUTPUT TO LINK
INPDON: BLOCK 1 ;INPUT DONE ON LINK
OUTCON: BLOCK 1 ;OUTPUT CONNECT LINK
OUTACT: BLOCK 1 ;OUTPUT LINK ACTIVE
NETBUF: BLOCK 1 ;ADDRESS OF NETWORK BUFFER
FRKRUN: BLOCK 1 ;FORK RUNNING (-1 IF RUNNING)
FRKJFN: BLOCK 1 ;JFN FOR EXEC
FRKHND: BLOCK 1 ;HANDLE FOR FORK
TRPCHN: BLOCK 1 ;TRAP CHANNELS FOR CONTL-C
SAVTWD: BLOCK 2 ;SAVE TERMINAL WORD
SAVMOD: BLOCK 1 ;SAVE MODE WORD
> ;END TOPS20
DATASZ==.-OPRDAT
PDLEN==^D400 ;PUSH-DOWN STACK LENGTH
PDL: BLOCK PDLEN ;PUSH DOWN POINTER
SUBTTL CONSTANT AND STORAGE DEFINITIONS
;STORAGE FOR SOFTWARE INTERRUPT SYSTEM
TIMCHN==2 ;CHANNEL FOR TIMER INTERRUPTS
TOPS20 <
IPCLEV==1 ;LEVEL TO USE FOR IPCF INTERRUPTS (MUST BE 1)
LEVTAB: EXP LEV1PC
EXP LEV1PC
EXP LEV1PC
LEV1PC: BLOCK 1
CHNTAB: $BUILD ^D36
$SET(1,,<IPCLEV,,INT>)
$SET(.ICIFT,,<IPCLEV,,TERMFK>)
$EOB
> ;END TOPS20
TOPS10 <
INTVEC:
IPCINT: $BUILD .PSVIS+1
$SET(.PSVNP,,INT)
$EOB
> ;END TOPS10
IPBBLK: $BUILD IB.SZ
$SET(IB.PRG,,%%.MOD) ;PROGRAM NAME
$SET(IB.OUT,,T%TTY) ;TERMINAL AS DEFAULT TEXT OUTPUT
$SET(IB.FLG,IT.OCT,1) ;OPEN COMMAND TERMINAL
$SET(IB.FLG,IP.STP,1) ;STOPCODES TO ORION
TOPS20 <
$SET(IB.INT,,<LEVTAB,,CHNTAB>)
> ;END TOPS20
TOPS10 <
$SET(IB.INT,,INTVEC)
> ;END TOPS10
$SET(IB.PIB,,PIBBLK) ;ADDRESS OF PID BLOCK
$EOB
PIBBLK: $BUILD PB.MNS ;SIZE OF PID BLOCK
$SET(PB.HDR,PB.LEN,PB.MNS) ;BLOCK LENGTH
$SET(PB.FLG,IP.PSI,1) ;CONNECT PID TO PSI
TOPS20 <
$SET(PB.INT,IP.CHN,1) ;CHANNEL FOR IPCF
> ;END TOPS20
TOPS10 <
$SET(PB.INT,IP.CHN,<IPCINT-INTVEC>) ;OFFSET FOR IPCF BLOCK
> ;END TOPS10
$EOB
;IB FOR REMOTE OPR INITIALIZATION
TOPS20 <
IPBRMT: $BUILD IB.SZ
$SET(IB.PRG,,%%.MOD) ;PROGRAM NAME
$SET(IB.OUT,,OUTRTN) ;DEFAULT $TEXT OUTPUT ROUTINE
$SET(IB.FLG,IP.STP,1) ;STOPCODES TO ORION
$SET(IB.INT,,<LEVTAB,,CHNTAB>) ;INTERRUPT SYSTEM ADDRESS
$SET(IB.PIB,,PIBBLK) ;ADDRESS OF PID BLOCK
$EOB
> ;END TOPS20
SUBTTL TABLE BUILDING DATA BASE
TABNUM: EXP NUMAPL+1 ;NUMBER OF TABLES INCLUDED
DEFINE X(A,B,C),<EXP C ;SET UP ADDRESS OF EACH ENTRY
EXTERNAL C ;SET UP AS EXTERNAL
.REQUIRE C>
SYNTAB: EXP OPRCMD## ;MAIN OPR TABLES
TABAPL ;ADDRESS OF APPLICATION TABLES
TABINI: $INIT(MANTAB) ;INIT FUNCTION FOR TABLES
MANTAB: $KEYDSP(APLALT,<$ACTION(CMDACT)>) ;KEYWORD TABLE BLOCK
APLALT: $STAB
ORNDSP(ENTFDB,ENTER,ENT) ;ENTER COMMAND FDB
ORNDSP(EXTFDB,EXIT,EXT) ;EXIT COMMAND
TOPS20< ORNDSP(PUSFDB##,<PUSH>,PUS)> ;PUSH COMMAND
ORNDSP(RETFDB,RETURN,RTN) ;RETURN FDB
ORNDSP(TAKOPR,TAKE,TAK) ;TAKE FDB
ORNDSP(WAIFDB##,WAIT,WAI,CM%INV);WAIT COMMAND
$ETAB
OPRPMT: [ASCIZ /OPR>/] ;DEFAULT STARTING PROMPT
APLTAB: $KEYDSP(KEYAP1,<$ACTION(APLACT)>) ;MAIN APPL. TABLE
DEFINE X(A,B,C),<ORNDSP(,<A>,<B>)>
KEYAP1: $STAB ;START TABLE OF NAMES
TABAPL ;EXPAND APPLICATION ENTRIES
$ETAB
SUBTTL Main Entry -- Initialization
OPR: RESET ;RESET THE UNIVERSE
MOVE P,[IOWD PDLEN,PDL] ;SET UP STACK
MOVX S1,IB.SZ ;GET THE LENGTH
MOVEI S2,IPBBLK ;AND THE ADDRESS OF THE ARGS
PUSHJ P,I%INIT ;INITIALIZE THE WORLD
MOVEI S1,DATASZ ;GET THE SIZE OF THE DATA
MOVEI S2,OPRDAT ;START OF THE IMPURE DATA
PUSHJ P,.ZCHNK ;CLEAR THE DATA AREA
PUSHJ P,GETLOC ;GET OPRS LOCATION
SETOM HDRTAB ;INIT TO USE MAIN TABLES AND PROMPT
MOVE S1,[IPCLEV,,TIMCHN] ;GET LEVEL NUMBER AND TIMER CHANNEL
MOVE S2,IPBBLK+IB.INT ;GET INTERRUPT DATA BASE INFO
PUSHJ P,P$INIT## ;INIT THE PARSER
PUSHJ P,I%HOST ;GET HOST NAME
MOVEM S1,HOSTNM ;SAVE HOST NAME
PUSHJ P,TABCHK ;CHECK THE TABLES
PUSHJ P,OPRSON ;OPR SIGNON TO ORION
SETOM INTDSP ;INIT INTERRUPT DISPLAY FLAG
TOPS20 <
HRRZI S1,.MSIIC ;BYPASS MOUNT COUNTS
MSTR ;DO THE FUNCTION
ERJMP .+1 ;IGNORE THE ERROR
MOVEI S1,.FHSLF ;GET MY HANDLE
MOVX S2,1B<.ICIFT> ;INFERIOR TERMINATIONS
AIC ;ACTIVATE THE CHANNEL
; CIS ;CLEAR INTERRUPT SYSTEM
> ;END TOPS20
PUSHJ P,I%ION ;TURN ON INTERRUPTS
JRST MAIN ;GO TO MAIN LOOP
SUBTTL MAIN MAIN LOOP IN OPR
MAIN: PUSHJ P,PRCMSG ;PROCESS ANY MESSAGES
TOPS20 <
SKIPE FRKRUN ;FORK RUNNING WITH EXEC
JRST MAIN.7 ;YES GO TO SLEEP
SKIPN REMACC ;REMOTE OPR?
JRST MAIN.1 ;NO..IGNORE REMOTE CHECKS
SKIPE OUTCON ;OUTPUT CONNECTED?
PUSHJ P,CONNEC ;CHECK OUT CONNECT
SKIPN INPDON ;INPUT DONE...READ THE DATA
JRST MAIN.7 ;GO TO SLEEP
PUSHJ P,INPDAT ;INPUT THE DATA
JUMPF MAIN.7 ;FAIL..GO TO SLEEP
> ;END TOPS20
MAIN.1: PUSHJ P,TABSET ;SETUP THE PARSER BLOCK
MAIN.2: DMOVE S1,P1 ;GET THE PARSER ARGUMENTS
PUSHJ P,PARSER## ;CALL THE PARSER
MOVE P3,S2 ;SAVE THE ADDRESS OF BLOCK
JUMPF MAIN.5 ;COMMAND ERROR ON PARSER
PUSHJ P,DSPCMD ;DISPLAY COMMAND IF NEEDED
MOVE T1,PRT.CM(P3) ;ADDRESS OF COMMAND MESSAGE
MOVE T2,MYNODE ;GET MYNODE FOR MESSAGE
MOVEM T2,COM.SN(T1) ;SAVE IN THE MESSAGE
SKIPE T2,TABCOD ;WAS THERE A TABLE CODE
MOVEM T2,COM.TY(T1) ;SAVE AS TYPE FOR APPLICATION
MAIN.3: MOVE S1,T1 ;MESSAGE TO SEND
MAIN.S: PUSHJ P,I%SOPR ;SEND TO ORION
JUMPT MAIN ;O.K. JUST RESTART
$TEXT (,<SEND TO ORION FAILED>)
PUSHJ P,I%EXIT ;HALT THE PROGRAM
MAIN.4: MOVE S1,T1 ;PUT PAGE ADDRESS IN S1
PUSHJ P,M%RPAG ;RETURN THE PAGE
JRST MAIN ;CHECK MESSAGES AND COMND
MAIN.5: MOVE T1,PRT.FL(P3) ;GET RETURNED FLAGS
TXNE T1,P.INTE ;INTERRUPT BREAK OUT
JRST [AOS INTDSP ;SET FLAG FOR DISPLAY
JRST MAIN] ;AND CHECK FOR MESSAGES
TXNE T1,P.ENDT ;END OF TAKE FILE
JRST [PUSHJ P,TAKEND ;END THE TAKE COMMAND
JRST MAIN.S] ;SEND THE MESSAGE AND CONTINUE
PUSHJ P,CHKDSP ;CHECK TO DISPLAY
JUMPF MAIN.6 ;NO..DON'T
PUSHJ P,SETOUT ;SETUP FOR OUTPUT
$TEXT (,<^I/CMDPMT/^T/@PRT.MS(P3)/^A>)
SKIPA ;ALREADY SETUP
MAIN.6: PUSHJ P,SETOUT ;SETUP THE OUTPUT
MOVX S1,CM%ESC ;GET THE ESCAPE FLAG
SKIPN REMACC ;REMOTE OPR?? ALWAYS CR,LF
TDNE S1,PRT.CF(P3) ;WAS LAST CHARACTER AN ESCAPE?
$TEXT (,<>) ;CR,LF OUTPUT
$TEXT (,<? ^T/@PRT.EM(P3)/>) ;OUTPUT THE ERROR MESSAGE..NOT TAKE
PUSHJ P,SNDOUT ;SEND THE OUTPUT
JRST MAIN ;TRY AGAIN
MAIN.7: SETZ S1, ;CLEAR S1 FOR SLEEP
PUSHJ P,I%SLP ;GO TO SLEEP
SETOM INTDSP ;SET DISPLAY FLAG FORCE .CMINI
JRST MAIN ;GET DATA
CMDPMT: ITEXT (<^M^J^T/@PARBLK+PAR.PM/>)
SUBTTL TAKEND END OF TAKE COMMAND
;THIS ROUTINE WILL TELL ORION THAT THE TAKE FILE IS FINISHED SO
;THAT INCASE THERE IS A SEND ERROR TO COMPONENT THE FILE CAN
;BE ABORTED
;RETURN S1/ MESSAGE ADDRESS FOR ORION
TAKEND: SETZM TAKFLG ;CLEAR TAKE FLAG
PUSHJ P,M%GPAG ;GET A PAGE OF MEMORY
MOVX S2,.OMTKE ;GET TAKE END CODE
STORE S2,.MSTYP(S1),MS.TYP ;SAVE THE TYPE
MOVEI S2,.OHDRS ;MINIMUM SIZE BLOCK
STORE S2,.MSTYP(S1),MS.CNT ;SAVE THE LENGTH
$RETT ;RETURN
SUBTTL DSPCMD DISPLAY TAKE FILE COMMANDS IF DESIRED
;THIS ROUTINE WILL CHECK THE DISPLAY SETTINGS FROM THE TAKE AND
;FROM THE TAKE DEFAULT DISPLAY AND DISPLAY COMMANDS IF SET
DSPCMD: PUSHJ P,CHKDSP ;CHECK IF NEED TO DISPLAY
JUMPF .RETT ;RETURN O.K.
MOVE T1,PRT.CM(P3) ;ADDRESS OF MESSAGE
PUSHJ P,SETOUT ;SETUP FOR OUTPUT
MOVE T2,COM.CM(T1) ;GET TEXT OFFSET
ADDI T2,1(T1) ;POINT TO START OF STRING
$TEXT (,<^I/CMDPMT/^T/(T2)/^A>) ;OUTPUT THE COMMAND
PUSHJ P,SNDOUT ;SEND THE OUTPUT
POPJ P, ;RETURN
CHKDSP: MOVE T1,PRT.FL(P3) ;GET FLAG WORD
TXNE T1,P.TAKE ;TAKE COMMAND ITSELF
JRST CHKD.1 ;YES..SET FLAG AND RETURN FALSE
TXC T1,P.CTAK!P.ERRO ;FROM TAKE AND AN ERROR
TXCN T1,P.CTAK!P.ERRO ;BOTH WERE SET
$RETT ;YES..DISPLAY THE TEXT
TXNN T1,P.DSPT ;DISPLAY TAKE COMMAND
$RETF ;RETURN FALSE
$RETT ;O.K. RETURN TRUE
CHKD.1: SETOM TAKFLG ;IN TAKE COMMAND
$RETF ;RETURN FALSE
SUBTTL PRCMSG PROCESS IPCF MESSAGE ROUTINE
PRCMSG: SETZM MSGCNT ;CLEAR THE COUNT
PRCM.0: PUSHJ P,C%RECV ;GO RECEIVE A MESSAGE
JUMPF .POPJ ;NO MORE MESSAGES, RETURN
PUSHJ P,VALMSG ;VALIDATE THE MESSAGE
JUMPF PRCM.1 ;NO GOOD..PITCH THE MESSAGE
LOAD M,MDB.MS(S1),MD.ADR ;GET MESSAGE ADR.
PUSHJ P,DSPRTN ;FIND PROCESSING ROUTINE
;RETURN S1 WITH ADDRESS
SKIPF ;FALSE RETURN..IGNORE PROCESSING
PUSHJ P,(S1) ;OTHERWISE, CALL THE ROUTINE
PRCM.1: PUSHJ P,C%REL ;FOR NOW IF WE FAIL TO FIND
AOS MSGCNT ;BUMP THE MESSAGE COUNT
JRST PRCM.0 ;LOOP BACK FOR MORE MESSAGES
DSPTAB: .OMDSP,,DSPOPD
.OMWTR,,WTRDSP
.OMACS,,SHWDSP
MT.TXT,,ACKOPR
DSPLEN==.-DSPTAB
DSPRTN: LOAD S2,.MSTYP(M),MS.TYP ;GET MESSAGE TYPE
MOVSI T1,-DSPLEN ;LENGTH OF DISPATCH TABLE
DSPR.1: HLRZ S1,DSPTAB(T1) ;GET TYPE FROM TABLE
CAIN S2,(S1) ;MATCH??
JRST DSPR.2 ;YES..SETUP S1 AND EXIT
AOBJN T1,DSPR.1 ;TRY NEXT ONE
$RETF ;FALSE RETURN
DSPR.2: HRRZ S1,DSPTAB(T1) ;GET PROCESSING ADDRESS
$RETT ;RETURN TRUE
SUBTTL VALMSG VALIDATE THE MESSAGE FROM ORION
;THIS ROUTINE WILL MAKE SURE THE MESSAGE RECEIVED IS FROM ORION.
;IF NOT, THE ROUTINE WILL RETURN FALSE
VALMSG: LOAD T1,MDB.SI(S1) ;SYSTEM PID INDEX WORD
TXZN T1,SI.FLG ;FROM A SYSTEM PID
$RETF ;NO..RETURN FALSE
CAIE T1,SP.OPR ;FROM ORION
$RETF ;NO..RETURN FALSE
$RETT ;YES..O.K. SO FAR
SUBTTL ACKOPR OUTPUT GALAXY TEXT MESSAGE
ACKOPR: LOAD S1,.MSFLG(M) ;GET THE FLAGS
TXNE S1,MF.NOM ;IS THIS A NULL ACK?
POPJ P, ;YES, JUST RETURN NOW
SKIPG T1,.OARGC(M) ;VALID ARGUMENT COUNT
$RETF ;NO JUST RETURN
LOAD T1,ARG.HD+.OHDRS(M),AR.TYP ;GET ARGUMENT TYPE
CAIE T1,.CMTXT ;IS IT TEXT
$RETF ;NO...RETURN
LOAD T1,ARG.HD+.OHDRS(M),AR.LEN ;GET THE LENGTH CODE
ADDI T1,.OHDRS ;LENGTH OF MESSAGE
LOAD T2,.MSTYP(M),MS.CNT ;GET MESSAGE LENGTH
CAMLE T1,T2 ;MESSAGE IN BOUNDS
$RETF ;NO..IGNORE MESSAGE
MOVEI T1,ARG.DA+.OHDRS(M) ;ADDRESS OF DATA
PUSHJ P,SETOUT ;SETUP FOR OUTPUT
$TEXT (,<
^C/[-1]/ --^T/(T1)/-->) ;OUTPUT TEXT
HRRZ S1,.MSFLG(M) ;GET ERROR CODE
CAIE S1,'ONS' ;OPR NOT SETUP
PJRST SNDOUT ;SEND OUTPUT AND RETURN
TOPS20 <
SKIPE REMOPR ;REMOTE OPERATOR?
PUSHJ P,I%EXIT ;TERMINATE
> ;END TOPS20
$TEXT (,< ..OPR Restarting..>) ;INFORM THE OPERATOR
JRST OPR ;RESTART THE WORLD
SUBTTL DSPOPD PROCESS DISPLAY MESSAGE FROM ORION
WTRDSP: SETOM T3 ;SET WTOR FLAG
SKIPA ;SKIP OVER DISPLAY ENTRY
DSPOPD: SETZM T3 ;NO WTOR FLAG
SKIPN T1,.OARGC(M) ;GET ARGUMENT COUNT
$STOP(IAC,Argument Count ^O/T1/ Not Valid in Display Message)
MOVEI T2,.OHDRS+ARG.HD(M) ;ADDRESS OF FIRST ARGUMENT
PUSHJ P,SETOUT ;SETUP FOR OUTPUT
DSPO.1: LOAD S1,ARG.HD(T2),AR.TYP ;GET THE TYPE FIELD
CAIE S1,.ORDSP ;IS IT DISPLAY
JRST DSPO.3 ;NO CHECK FOR TEXT
$TEXT (,<^M^J^C/ARG.DA(T2)/ ^A>)
MOVEI S1,ARG.DA+1(T2) ;ADDRESS OF THE TEXT
DSPO.2: PUSHJ P,DSPMSG ;OUTPUT THE TEXT
LOAD S2,ARG.HD(T2),AR.LEN ;GET LENGTH OF BLOCK
ADD T2,S2 ;BUMP TO NEXT BLOCK
SOJG T1,DSPO.1 ;GET NEXT BLOCK
SKIPE T3 ;WAS IT A WTOR?
$TEXT(,<^A>) ;RING THE BELLS
PJRST SNDOUT ;SEND THE OUTPUT AND RETURN
DSPO.3: CAIE S1,.CMTXT ;WAS IT JUST TEXT
$STOP(IDM,Message Argument Type ^O/S1/ not Valid for Display Messages)
MOVEI S1,ARG.DA(T2) ;ADDRESS OF TEXT
JRST DSPO.2 ;OUTPUT THE TEXT
DSPMSG:
TOPS20 <
SKIPE REMACC ;REMOTE OPR
PJRST DSPM.1 ;OUTPUT THE DATA
> ;END TOPS20
PJRST K%SOUT ;NO..SOUT IT
TOPS20 <
DSPM.1: $TEXT (,<^T/(S1)/^A>) ;DUMP THE DATA
$RETT ;RETURN
> ;END TOPS20
SUBTTL SHWDSP PROCESS DISPLAY MESSAGE FROM ORION
SHWDSP: SKIPN T1,.OARGC(M) ;GET ARGUMENT COUNT
JRST S..IAC ;INVALID COUNT
MOVEI T2,.OHDRS+ARG.HD(M) ;ADDRESS OF FIRST ARGUMENT
SHWD.1: LOAD S1,ARG.HD(T2),AR.TYP ;GET THE TYPE FIELD
CAIE S1,.ORDSP ;IS IT DISPLAY
JRST SHWD.3 ;NO CHECK FOR TEXT
PUSHJ P,SETOUT ;SETUP FOR OUTPUT
$TEXT (,<^M^J^C/ARG.DA(T2)/ --^T/ARG.DA+1(T2)/-->)
SKIPA ;GET NEXT ARGUMENT
SHWD.2: PUSHJ P,DSPMSG ;OUTPUT THE TEXT
LOAD S2,ARG.HD(T2),AR.LEN ;GET LENGTH OF BLOCK
ADD T2,S2 ;BUMP TO NEXT BLOCK
SOJG T1,SHWD.1 ;GET NEXT BLOCK
PJRST SNDOUT ;SEND THE OUTPUT
SHWD.3: CAIE S1,.CMTXT ;WAS IT JUST TEXT
JRST S..IDM ;INVALID DISPLAY MESSAGE TYPE
MOVEI S1,ARG.DA(T2) ;ADDRESS OF TEXT
JRST SHWD.2 ;OUTPUT THE TEXT
SUBTTL TABSET SETUP TABLES FOR PARSER CALL
;THIS ROUTINE WILL SET UP THE DEFAULT TABLES AND THE DEFAULT
;PROMPT
;AND RETURN ARGUMENTS IN P1 AND P2
TABSET:
TOPS20 <
SKIPE REMOPR ;REMOTE OPERATOR
PJRST TABS.3 ;YES..SETUP FOR REMOTE OPERATOR
> ;END TOPS20
SKIPE HDRTAB ;USING THE HEAD TABLES(OPR TABLES)
JRST TABS.1 ;YES..SET UP PARSER ARGUMENTS
MOVE S1,ENTCOD ;APPLICATION TYPE
MOVEM S1,TABCOD ;SAVE THE VALUE FOR MESSAGES
MOVE S1,DEFTAB ;GET THE DEFAULT TABLES FOR CALL
AOS S1 ;POSITION OVER THE HEADER
STORE S1,.CMFNP+MANTAB+1,CM%LST ;SAVE AS ALTERNATE TO MAIN TABLE
MOVEI S1,TABINI ;ADDRESS OF MAIN TABLE INIT
MOVEM S1,PARBLK+PAR.TB ;SAVE IN PARSER CALL BLOCK
MOVEI S1,HDRPMT ;GET DEFAULT PROMPT
TABS.0: MOVEM S1,PARBLK+PAR.PM ;SAVE THE PROMPT IN BLOCK
MOVEI P1,PAR.PM+1 ;SIZE OF THE BLOCK
MOVEI P2,PARBLK ;PARSER BLOCK
SKIPN TAKFLG ;IN A TAKE FILE
SKIPG INTDSP ;ANY MESSAGES DISPLAYED
$RETT ;RETURN
SKIPG MSGCNT ;ANY MESSGES PROCESSED
$RETT ;NO.. FORCE OUT THE PROMPT
MOVE S1,PARBLK+PAR.TB ;GET TABLE ADDRESS
PUSHJ P,P$PNXT## ;GET THE NEXT PDB
MOVEM S1,PARBLK+PAR.TB ;SAVE TABLE ADDRESS
SETZM INTDSP ;CLEAR THE FLAG
$RETT ;RETURN
TABS.1: SETZM TABCOD ;CLEAR FIELD FOR MAIN TABLES
MOVE S1,SYNTAB ;ADDRESS OF MAIN TABLES
MOVE T1,TAB.IN(S1) ;ADDRESS OF .CMINI FOR TABLES
STORE T1,PARBLK+PAR.TB ;SAVE THE TABLE ADDRESS
HLRZ T2,KEYAP1 ;APPLICATION KEYWORD TABLE
SKIPN T2 ;ANY ENTRIES IN TABLE
JRST TABS.2 ;NO..DON'T SET UP ALTERNATE
MOVE T3,TAB.KY(S1) ;GET MAIN KEYWORD TABLE
MOVEI T2,APLTAB ;ADDRESS OF THE TABLE PDB
AOS T2 ;POSITION TO THE DATA
STORE T2,.CMFNP+1(T3),CM%LST ;SAVE AS ALTERNATE TABLE
TABS.2: MOVE S1,OPRPMT ;ADDRESS OF THE PROMPT
JRST TABS.0 ;FINISH AND RETURN
TOPS20 <
TABS.3: MOVE S1,SYNTAB ;ADDRESS OF MAIN TABLES
MOVE T1,TAB.IN(S1) ;ADDRESS OF .CMINI FOR TABLES
STORE T1,PARBLK+PAR.TB ;SAVE THE TABLE ADDRESS
MOVE S1,OPRPMT ;GET THE OPR PROMPT
MOVEM S1,PARBLK+PAR.PM ;SAVE THE PROMPT
MOVSI S1,(POINT NETBSZ,) ;NETBSZ BIT BYTES
HRR S1,NETBUF ;GET DATA ADDRESS
MOVEM S1,PARBLK+PAR.SR ;SAVE SOURCE POINTER
MOVEI P1,PAR.SZ ;SIZE OF THE BLOCK
SKIPN REMACC ;REMOTE ACCESS LINK?
MOVEI P1,PAR.PM+1 ;NO..USE MINIMUM SIZE BLOCK
MOVEI P2,PARBLK ;ADDRESS OF PARSER BLOCK
$RETT ;RETURN
> ;END TOPS20
SUBTTL Software Interrupt System Routines
;ROUTINE CALLED ON AN INTERRUPT
INT: $BGINT IPCLEV ;BEGIN AN INTERRUPT
PUSHJ P,P$INTR## ;PARSER INTERRUPT SUPPORT
PUSHJ P,C%INTR ; FLAG RECEIPT OF IPCF INTERRUPT
$DEBRK ; EITHER RETURN TO SEQUENCE
; OR CHANGE PC AND HANDLE THE INTERRUPT
SUBTTL COMMAND AND APPLICATION ACTION ROUTINES
;THESE ROUTINES WILL BE GIVEN CONTROL ON A KEYWORD
;FROM THE MAIN COMMAND TABLES (CMDACT) AS WELL AS FROM AN
;APPLICATION KEYWORD TYPED WHILE USING THE MAIN TABLES.
CMDACT:: SETZM TABCOD ;CLEAR THE CODE TYPE FOR THESE
;ENTRIES
MOVE T1,CR.SAV(S2) ;GET THE ADDRESS OF SAVED ELEMENT
MOVE T1,ARG.DA(T1) ;GET THE VALUE
MOVEM T1,CMDCOD## ;SAVE THE COMMAND CODE
$RETT ;RETURN TRUE
APLACT: MOVE T1,CR.SAV(S2) ;GET THE ADDRESS OF SAVED ELEMENT
MOVE T1,ARG.DA(T1) ;GET THE VALUE
MOVEM T1,TABCOD ;SAVE THE CODE
MOVE T2,ARGFRE## ;GET LAST ARGUMENT POINTER ADDRESS
SUBI T2,2 ;BACK OVER APPLICATION NAME..REMOVE
MOVEM T2,ARGFRE## ;RESTORE POINTER
$RETT ;RETURN
SUBTTL ENTER AND RETURN COMMANDS
INTERNAL ENTFDB
ENTFDB: $NOISE(ENT010,<Command Subset>,<$PREFILL(ENTCHK)>)
ENT010: $KEYDSP(ENTTAB,<$ACTION(ENTRTN)>)
DEFINE X(A,B,C),<ORNDSP(ENT020,<A>,<B>)>
;TABLE MUST BE IN DSPTAB FORMAT ****
ENTTAB: $STAB
TABAPL ;EXPAND APPLICATION TABLES
$ETAB
ENT020: $CRLF(<$ACTION(ENTER)>)
ENTCHK: SKIPN REMOPR ;IS IT A REMOTE OPERATOR
$RETT ;NO..ASSUME O.K.
MOVEI S2,[ASCIZ/ENTER Command not allowed for Remote Operators/]
$RETF ;RETURN FALSE
ENTRTN: MOVE T1,CR.RES(S2) ;GET THE RESULT
MOVEM T1,CMDDAT ;SAVE THE DATA
$RETT ;RETURN TRUE
ENTER: MOVE T1,CMDDAT ;GET THE DATA WORD
HLRZ T2,(T1) ;GET POINTER TO THE STRING
$TEXT (<-1,,HDRPMT>,<^T/(T2)/^7/[76]/^0>)
SETZM HDRTAB ;IN APPLICATION MODE
HRRZ T2,(T1) ;GET ADDRESS OF CODE WORD
HLRZ T2,(T2) ;GET THE SYMBOL VALUE
MOVEM T2,ENTCOD ;SAVE THE CODE
MOVE T3,T2 ;PLACE IN T3
ANDI T3,77 ;GET THE TABLE INDEX FROM CODE
MOVE T3,SYNTAB(T3) ;ADDRESS OF THE TABLES
MOVE T4,TAB.KY(T3) ;GET MAIN KEYWORD TABLE
MOVEM T4,DEFTAB ;SAVE AS DEFAULT TABLES
PJRST P$NPRO## ;NO PROCESSING REQUIRED
RETFDB: $NOISE(RET010,<to Operator Command Level>)
RET010: $CRLF(<$ACTION(RETURN)>)
RETURN: SKIPE HDRTAB ;SHOULD BE IN APPLICATION TABLES
$RETF ;ERROR..RETURN FALSE TO ABORT
SETOM HDRTAB ;SET FOR MAIN TABLES
SETZM TABCOD ;CLEAR CODE FOR APPLICATION
PJRST P$NPRO## ;NO PROCESSING REQUIRED
SUBTTL EXIT COMMAND TABLES
EXTFDB:: $NOISE(EXT010,<to Monitor Level>)
EXT010: $CRLF(<$ACTION(EXTACT)>)
EXTACT: MOVX S1,E.EXIT ;EXIT COMMAND ISSUED
MOVEM S1,ERRCOD ;SAVE THE CODE
PUSHJ P,SETFAL ;SEND THE SHUTDOWN MESSAGE AND HALT
JRST OPR ;RESTART THE JOB
SUBTTL TAKOPR ROUTINE
;THIS ROUTINE WILL CHECK TAKE AUTHORIZATION BEFORE
;PROCEEDING WITH THE PARSE
TAKOPR:: $CRLF(<$PREFILL(TAKO.1),$ALTERNATE(TAKFDB##)>)
TAKO.1: SKIPN REMOPR ;REMOTE OPR?
JRST TAKO.2 ;NO..MODIFY THE PDB
MOVEI S2,[ASCIZ/TAKE Command Not allowed for Remote Operators/]
$RETF ;RETURN FALSE
TAKO.2: MOVEI S1,TAKFDB## ;GET THE TAKE ADDRESS
AOS S1 ;BUMP OVER THE HEADER
STORE S1,CR.PDB(S2),RHMASK ;SAVE NEW PDB TO USE
$RETT ;RETURN
SUBTTL WAIOPR ROUTINE
;THIS ROUTINE WILL CHECK WAIT AUTHORIZATION BEFORE
;PROCEEDING WITH THE PARSE
WAIOPR:: $CRLF(<$PREFILL(WAIO.1),$ALTERNATE(WAIFDB##)>)
WAIO.1: SKIPN REMOPR ;REMOTE OPR?
JRST WAIO.2 ;NO..MODIFY THE PDB
MOVEI S2,[ASCIZ/WAIT Command Not allowed for Remote Operators/]
$RETF ;RETURN FALSE
WAIO.2: MOVEI S1,WAIFDB## ;GET THE WAIT ADDRESS
AOS S1 ;BUMP TO PDB
STORE S1,CR.PDB(S2),RHMASK ;SAVE NEW PDB TO USE
$RETT ;RETURN
SUBTTL SETRTN AND SETTRM TERMINAL SET ROUTINES
;THESE ROUTINES WILL SETUP THE TERMINAL DATA AND
;ON THE CONFIRM SETTRM WILL PROCESS THE DATA
SETRTN:: MOVE T1,CR.SAV(S2) ;GET THE ADDRESS OF SAVED ELEMENT
MOVE T1,ARG.DA(T1) ;GET THE VALUE
MOVEM T1,CMDDAT ;SAVE THE COMMAND DATA
$RETT ;RETURN TRUE
SETTRM:: MOVE S1,CMDDAT ;GET THE DATA WORD
CAIN S1,.KYKPD ;WAS IT TO SET KEYPAD
PJRST SETKPD ;YES..SETUP KEYPAD MODE
CAIN S1,.KYNKP ;WAS IT NOKEYPAD
PJRST SETNKP ;YES..SETUP NOKEYPAD MODE
$CALL K%STYP ;SET THE TERMINAL TYPE
JUMPF SETT.3 ;GIVE ERROR IF BAD TTY TYPE
SETRET: PJRST P$NPRO## ;NO PROCESSING REQUIRED
SETT.3: MOVEI S2,[ASCIZ/Terminal Type Setup Failed/]
$RETF ;RETURN FALSE TO ABORT
SETT.4: MOVEI S2,[ASCIZ/Terminal Keypad Function Setup Failure/]
$RETF ;RETURN FALSE TO ABORT
;HERE ON SET TERMINAL KEYPAD
SETKPD: MOVEI S1,ESCTAB ;GET ADDRESS OF ESCAPE TABLE
PUSHJ P,K%SUET ;SET TABLE ADDRESS
JUMPF SETT.4 ;COULD NOT DO..ERROR
PJRST SETRET ;SET RETURN
;HERE ON SET TERMINAL NOKEYPAD
SETNKP:: MOVEI S1,0 ;CLEAR TABLE ADDRESS
PUSHJ P,K%SUET ;DO IT
JUMPF SETT.4 ;COULD NOT DO..ERROR
PJRST SETRET ;SET RETURN
SUBTTL ESCAPE Sequence Table for Operator Terminals
TOPS10 <
ESCTAB:
REPEAT 33,< ;CODES 0 THRU 32
XLIST
EXP 0
LIST
> ;END REPEAT 33
POINT 7,[BYTE (7) .CHESC,0] ;MAKE ESC, ESC = ESC
REPEAT 43,< ;CODES 34 THRU 76
XLIST
EXP 0
LIST
> ;END REPEAT 43
EXP ESCTAB ;? TAKES US TO NEXT TABLE (THIS ONE)
EXP 0 ;CODE 100
EXP 0 ;A
EXP 0 ;B
POINT 7,[BYTE (7) .CHCNU,0] ;C IS CONTROL U
POINT 7,[BYTE (7) "P","R","I","N","T","E","R",.CHESC]
REPEAT 10,< ;E THRU L
XLIST
EXP 0
LIST
> ;END REPEAT 10
POINT 7,[ASCIZ /?/] ;M
EXP 0 ;N
EXP ESCTAB ;O
REPEAT 13,< ;P THRU Z
XLIST
EXP 0
LIST
> ;END REPEAT 13
REPEAT 6,< ;CODES 133 THRU 140
XLIST
EXP 0
LIST
> ;END REPEAT 6
REPEAT 15,< ;LCA THRU LCM
XLIST
EXP 0
LIST
> ;END REPEAT 15
EXP 0 ;LCN
EXP 0 ;LCO
POINT 7,[BYTE (7) .CHESC,0] ;LCP IS RECOGNIZE CHARACTER
POINT 7,[ASCIZ /SHOW STATUS
/] ;LCQ
POINT 7,[ASCIZ/SHOW QUEUES
/] ;
POINT 7,[ASCIZ/SHOW PARAMETERS
/] ;
POINT 7,[ASCIZ/SHOW MESSAGES
/] ;
POINT 7,[ASCIZ/SHOW ROUTE-TABLE
/] ;LCU
POINT 7,[BYTE (7) .CHCNW,0] ;LCV IS DELETE FIELD
POINT 8,[BYTE (8) 233,310,233,312,.CHCNR,0] ;HOME ERASE EOS CONTL-R
POINT 7,[ASCIZ/SHOW OPERATORS
/] ;LCX
POINT 7,[ASCIZ/SHOW QUEUE MOUNT-REQUESTS
/]; ;LCY
EXP 0 ;LCZ
REPEAT 5,< ;CODES 173 THRU 177
XLIST
EXP 0
LIST
> ;END REPEAT 5
> ;END TOPS10
TOPS20 <
ESCTAB: BLOCK 1 ;NULL ESCAPE TABLE
> ;END TOPS20
SUBTTL SHWDAY SHOW DAYTIME ACTION ROUTINE
SHWDAY:: PUSHJ P,SETOUT ;SETUP THE OUTPUT
$TEXT (,<^H/[-1]/>)
PUSHJ P,SNDOUT ;SEND THE OUTPUT
PJRST P$NPRO## ;NO PROCESSING REQUIRED
SUBTTL OPRRMT REMOTE OPR ENTRY POINT
TOPS10 <
OPRRMT: JRST OPR ;ASSUME START
> ;END TOPS10
TOPS20 <
OPRRMT: RESET ;RESET THE UNIVERSE
MOVEM T1,INPJFN ;INPUT JFN FOR LINK
MOVEM T2,MYNODE ;MY NODE
MOVE P,[IOWD PDLEN,PDL] ;SET UP STACK
MOVX S1,IB.SZ ;GET THE LENGTH
MOVEI S2,IPBRMT ;AND THE ADDRESS OF THE ARGS
PUSHJ P,I%INIT ;INITIALIZE THE WORLD
SETOM HDRTAB ;INIT TO USE MAIN TABLES AND PROMPT
SETZB S1,S2 ;CLEAR S1 AND S2.. NO ARGUMENTS
PUSHJ P,P$INIT## ;CALL THE PARSER
PUSHJ P,I%HOST ;GET HOST NAME
MOVEM S1,HOSTNM ;SAVE HOST NAME
PUSHJ P,TABCHK ;CHECK THE TABLES
SETOM REMOPR ;REMOTE OPERATOR FLAG
PUSHJ P,OPRSON ;OPR SIGNON TO ORION
MOVE S1,[IPCLEV,,IPCRMT] ;REMOTE IPCF INTERRUPT ROUTINE
MOVEM S1,CHNTAB+1 ;SAVE IN CHANNEL TABLE
PUSHJ P,I%ION ;TURN ON INTERRUPTS
PUSHJ P,REMSET ;SETUP OPR LINKS
PUSHJ P,WAITCN ;WAIT FOR THE CONNECT
PJRST MAIN ;PROCESS NORMALLY
;DELETE ENTRY IN TABLES ***
> ;END TOPS20
SUBTTL WAITCN WAIT FOR OUTPUT LINK CONNECT
;THIS ROUTINE WILL WAIT FOR THE CONNECT ON THE OUTPUT LINK
;BEFORE INITIALIZING THE PROCESS
TOPS20 <
WAITCN: SKIPE OUTCON ;OUTPUT CONNECTED
JRST WAIT.1 ;PROCESS CONNECT AND RETURN
MOVEI S1,5 ;WAIT FOR 5 SECONDS
PUSHJ P,I%SLP ;SLEEP FOR A BIT
JRST WAITCN ;WAIT FOR THE CONNECTION
WAIT.1: PJRST CONNEC ;DO CONNECT AND RETURN
> ;END TOPS20
SUBTTL REMSET SETUP OPR LINKS
;THIS ROUTINE WILL SETUP ALL LINKS AND INTERRUPTS FOR THE REMOTE
;OPERATOR
TOPS20 <
REMSET: SETOM REMACC ;SET AS REMOTE ACCESS
$TEXT (<-1,,DCNDAT>,<DCN:^N/MYNODE/-^D/[DCNTSK]/^0>)
MOVX S1,GJ%SHT ;SHOT JFN
HRROI S2,DCNDAT ;GET DATA
GTJFN ;OPEN THE FILE
PJRST REMS.1 ;OPEN FAILED
MOVEM S1,OUTJFN ;SAVE OUTPUT JFN
MOVE S2,[FLD(NETBSZ,OF%BSZ)+OF%RD+OF%WR]
OPENF ;OPEN THE LINK
PJRST REMS.1 ;OPEN FAILED
MOVE S1,OUTJFN ;GET THE JFN
MOVEI S2,.MOACN ;ACTIVATE CHANNEL
MOVX T2,OUTCHN ;OUTPUT CHANNEL
SETZM T1 ;CLEAR T1
STORE T2,T1,MO%CDN ;CONNECT INTERRUPTS
MTOPR ;DO THE FUNCTION
ERJMP REMS.2 ;HALT IF FAILS
MOVE S1,[IPCLEV,,OUTINT] ;INTERRUPT ENTRY IN CHNTAB
MOVEM S1,CHNTAB+OUTCHN ;SAVE IN CHANNEL TABLE
;edit 73
; MOVE S1,INPJFN ;GET THE INPUT CHANNEL JFN
; MOVEI S2,.MOACN ;ACTIVATE CHANNEL
; MOVX T2,INPCHN ;OUTPUT CHANNEL NUMBER
; SETZM T1 ;CLEAR T1
; STORE T2,T1,MO%DAV ;SAVE FOR DATA INTERRUPTS
; MTOPR ;ACTIVATE THE CHANNEL
; ERJMP [HALTF] ;FAIL ..ABORT
MOVE S1,[IPCLEV,,INPINT] ;INPUT DATA INTERRUPT
MOVEM S1,CHNTAB+INPCHN ;SAVE IN CHANNEL TABLE
MOVE S1,INPJFN ;GET THE INPUT JFN
MOVX S2,.MOCC ;ACCEPT THE CONNECT
SETZM T1 ;CLEAR OTHER FLAGS
MTOPR ;CONFIRM THE CONNECT
ERJMP REMS.3 ;ERROR..ABORT
MOVX S1,.FHSLF ;GET MY HANDLE
MOVX S2,<1B<OUTCHN>!1B<INPCHN>>;ACTIVATE THE CHANNELS
AIC ;TURN ON CHANNELS
MOVEI S1,<<OUTSIZ/<^D36/NETBSZ>>+1>;NUMBER OF WORDS NEEDED
MOVE T1,S1 ;SAVE THE VALUE
PUSHJ P,M%GMEM ;GET THE MEMORY
MOVEM S2,BUFADR ;SAVE THE BUFFER ADDRESS
MOVE S1,T1 ;GET SIZE OF BUFFER
PUSHJ P,M%GMEM ;GET INPUT BUFFER
MOVEM S2,NETBUF ;NETWORK BUFFER
;***WAIT FOR CONNECT ON OUTPUT LINK
POPJ P, ;RETURN
REMS.1: MOVX S1,E.OPNF ;OPEN FAILURE
MOVEM S1,ERRCOD ;SAVE THE CODE
PJRST SETFAL ;SETUP FAILURE RETURN WITH ERROR
REMS.2: MOVX S1,E.CONF ;CONNECT FAILURE
MOVEM S1,ERRCOD ;SAVE THE CODE
PJRST SETFAL ;SETUP FAILURE ABORT
REMS.3: MOVX S1,E.ACFL ;ACCEPT CONNECT FAILED
MOVEM S1,ERRCOD ;SAVE THE CODE
PJRST SETFAL ;ABORT AND SEND FAILURE
> ;END TOPS20
SUBTTL SETOUT SETUP OUTPUT OF DATA
;THIS ROUTINE WILL CHECK FOR A REMOTE NODE AND IF SO SET UP THE
;APPROPRIATE HEADERS
TOPS20 <
SETOUT:: SKIPN REMACC ;REMOTE OPERATOR?
$RETT ;NO..IGNORE IT
PUSHJ P,SETPTR ;SETUP THE POINTER
MOVX S2,1 ;COMPLETE RESPONSE CODE
IDPB S2,S1 ;SAVE THE BYTE
MOVEM S1,OUTPTR ;SAVE THE POINTER
$TEXT (,<^M^J^N/HOSTNM/::^A>) ;OPR HEADER LINE
POPJ P, ;RETURN
> ;END TOPS20
TOPS10 <
SETOUT:: $RETT ;RETURN
> ;END TOPS10
SUBTTL SNDOUT SEND OUTPUT OVER THE LINK
;THIS ROUTINE WILL OUTPUT THE DATA IN THE BUFFER
TOPS20 <
SNDOUT:: SETZM INTDSP ;CLEAR OUTPUT DISPLAY FLAG
SKIPN REMACC ;REMOTE OPR?
$RETT ;NO..RETURN
MOVX S1,0 ;GET A NULL
IDPB S1,OUTPTR ;END WITH A NULL
MOVE S1,OUTJFN ;OUTPUT JFN
MOVSI S2,(POINT NETBSZ,) ;NETBSZ BIT BYTES
HRR S2,BUFADR ;BUFFER ADDRESS
SETZ T1, ;OUTPUT TILL A NULL
SOUTR ;SEND THE DATA
ERJMP SNDO.1 ;ERROR...
POPJ P, ;RETURN
SNDO.1: MOVX S1,E.OUTF ;OUTPUT FAILED
MOVEM S1,ERRCOD ;SAVE THE CODE
PJRST SETFAL ;SETUP FAILURE..ABORT WITH ERROR
;STOP THE PROCESS
> ;END TOPS20
TOPS10 <
SNDOUT:: SETZM INTDSP ;CLEAR OUTPUT DISPLAY FLAG
$RETT ;RETURN
> ;END TOPS10
SUBTTL OUTRTN OUTPUT ROUTINE FOR LINKS
;THIS IS THE TEXT DEFAULT OUTPUT ROUTINE AND WILL SETUP DATA FOR THE
;LINKS
TOPS20 <
OUTRTN: SOSG OUTCNT ;ROOM LEFT
JRST OUTR.1 ;NO..SEND AND MAKE ROOM
IDPB S1,OUTPTR ;SAVE THE BYTE
$RETT ;RETURN TRUE
OUTR.1: PUSH P,S1 ;SAVE THE BYTE
PUSHJ P,SETPTR ;SETUP THE POINTER
MOVX S2,2 ;RESERVE THE CTY..LONG MESSAGE
IDPB S2,S1 ;SAVE BYTE AS FIRST ONE
PUSHJ P,SNDOUT ;SEND THE OUTPUT
PUSHJ P,SETPTR ;RESET THE POINTERS
MOVX S2,3 ;RELEASE AFTER THIS MESSAGE
IDPB S2,S1 ;SAVE THE BYTE
MOVEM S1,OUTPTR ;SAVE THE POINTER
POP P,S1 ;RESTORE THE VALUE
JRST OUTRTN ;SAVE THE CHARACTER NOW
SUBTTL SETPTR SETUP POINTERS FOR OUTPUT
;THIS ROUTINE WILL SETUP THE POINTERS AND RETURN WITH S1 CONTAINING
;THE NEW BYTE POINTER
SETPTR: MOVEI S1,OUTSIZ-1 ;GET OUTPUT SIZE AND LEAVE ROOM FOR NULL
MOVEM S1,OUTCNT ;SAVE THE COUNT
MOVSI S1,(POINT NETBSZ,) ;SETUP FOR NETBSZ BIT BYTES
HRR S1,BUFADR ;GET BUFFER ADDRESS
POPJ P, ;RETURN S1 BYTE POINTER
> ;END TOPS20
SUBTTL INPINT INPUT OVER LINK INTERRUPT
;THIS ROUTINE WILL FLAG THAT INPUT IS READY OVER THE LINK
TOPS20 <
INPINT: $BGINT IPCLEV ;SETUP AT SAME LEVEL
SETOM INPDON ;SET INPUT DONE
$DEBRK ;RETURN
SUBTTL OUTINT OUTPUT LINK CONNECTED
;THIS ROUTINE WILL FLAG A CONNECT INTERRUPT ON OUTPUT LINK
OUTINT: $BGINT IPCLEV ;SETUP THE LEVEL
SETOM OUTCON ;OUTPUT CONNECTED
$DEBRK ;RETURN
SUBTTL IPCRMT IPCF INTERRUPT ROUTINE FOR REMOTE OPR
;THIS ROUTINE WILL FLAG IPCF INTERRUPTS ON THE -20 WHEN RUNNING
;AS A REMOTE OPR
IPCRMT: $BGINT IPCLEV ;SETUP THE LEVEL
PUSHJ P,C%INTR ;FLAG THE INTERRUPT
$DEBRK ;RETURN
SUBTTL INPDAT INPUT THE DATA FROM LINK
;THIS ROUTINE WILL READ DATA FROM THE LINK
INPDAT: SKIPN INPDON ;GET DATA
$RETF ;RETURN FALSE
SETZ S1, ;CLEAR VALUE
EXCH S1,INPDON ;RESET THE FLAG
MOVE S1,INPJFN ;GET THE INPUT JFN
MOVSI S2,(POINT NETBSZ,) ;NETBSZ BIT BYTES
HRR S2,NETBUF ;NETWORK DATA
MOVNI T1,OUTSIZ ;GET THE OUTPUT SIZE
SINR ;READ THE DATA
ERJMP INPD.1 ;ERROR..EXIT
HRRZ T3,T1 ;SAVE THE NEW COUNT
SETZ S1, ;CLEAR S1
IDPB S1,S2 ;SAVE A NULL ON THE END
MOVE S1,INPJFN ;GET THE JFN
MOVEI S2,.MORLS ;READ THE LINK STATUS
SETZ T1, ;CLEAR FOR STATUS
MTOPR ;GET THE STATUS
ERJMP INPD.1 ;ERROR..ABORT
TXNN T1,MO%CON ;CHECK IF STILL CONNECTED?
PJRST INPD.1 ;NO.. ABORT THE PROCESS
TXNE T1,MO%EOM ;DATA AVAILABLE
SETOM INPDON ;SET THE FLAG
SUBI T3,-OUTSIZ ;GET NUMBER OF CHARACTERS READ
CAIG T3,2 ;GREATER THAN MINIMUM MESSAGE
$RETF ;NO..RETURN FALSE
$RETT ;RETURN TRUE
INPD.1: MOVX S1,E.INPF ;INPUT FAILED
MOVEM S1,ERRCOD ;SAVE THE CODE
PJRST SETFAL ;SEND SETUP FAILURE
SUBTTL CONNEC PROCESS CONNECT MESSAGE
;THIS ROUTINE WILL PROCESS THE CONNECT MESSAGE FOR THE OUTPUT
;LINK
CONNEC: SKIPN OUTCON ;OUTPUT CONNECT
$RETT ;NO..RETURN
SETZ S1, ;CLEAR FLAG
EXCH S1,OUTCON ;CLEAR FLAG
MOVE S1,OUTJFN ;GET OUTPUT JFN
MOVEI S2,.MORLS ;READ LINK STATUS
MTOPR ;GET THE STATUS
ERJMP CONN.1 ;ERROR..HALT
TXNN T1,MO%WCC!MO%CON ;CONNECT MADE
JRST CONN.2 ;BAD CONNECT DATA
SETOM OUTACT ;SET FLAG
$RETT ;RETURN
CONN.1: MOVX S1,E.STSF ;STATUS OF SERVER FAILED
MOVEM S1,ERRCOD ;SAVE THE CODE
PJRST SETFAL ;SETUP FAILURE..ABORT WITH ERROR
CONN.2: MOVEM T1,ARG1 ;SAVE THE ARGUMENT
MOVX S1,E.INVC ;INVALID CONNECT DATA
MOVEM S1,ERRCOD ;SAVE THE CODE
PJRST SETFAL ;SETUP FAILURE..ABORT WITH ERROR
> ;END TOPS20
SUBTTL TXTLIN CHECK IF MULTIPLE LINE INPUT ALLOWED
;THIS ROUTINE WILL CHECK IF USER IS REMOTE OPERATOR ON THE -20
;AND IF SO NOT ALLOW MULTIPLE LINE INPUT
TXTLIN:: SKIPN REMOPR ;ARE WE A REMOTE OPERATOR
PJRST TXTINP## ;NO..GO GET THE TEXT
TOPS20 <
MOVEI S2,[ASCIZ/Multiple Line Text Not Allowed for Remote Operators/]
$RETF
> ;END TOPS20
TOPS10 <
$RETT ;RETURN O.K.
> ;END TOPS10
SUBTTL SETFAL SEND A SETUP FAILURE FOR OPR ERRORS
;THIS ROUTINE WILL SEND A SETUP FAILURE TO SHUTDOWN AN OPR
;ON AN ERROR
SETFAL: PUSHJ P,SETMES ;SETUP MESSAGE
MOVX S1,.ORFAL ;SETUP FAILURE
STORE S1,ARG.HD+.OHDRS(M),AR.TYP ;SAVE IN MESSAGE
MOVEI T1,.OHDRS+ARG.DA(M) ;POINT TO NEXT ARGUMENT
MOVX S1,.CMTXT ;TEXT ARGUMENT
STORE S1,ARG.HD(T1),AR.TYP ;SAVE THE TYPE
MOVEI S1,ARG.DA(T1) ;ADDRESS TO STORE DATA
HRLI S1,(POINT 7,0) ;MAKE BYTE POINTER
MOVEM S1,TEMPTR ;SAVE THE POINTER
MOVE S1,ERRCOD ;GET ERROR CODE
CAILE S1,E.MAXE ;WITHIN BOUNDS
$STOP(IEC,INVALID ERROR CODE FOR FAILURE)
$TEXT (SETTXT,<^I/@OPRTXT(S1)/>^0);SAVE THE TEXT
HRRZ S1,TEMPTR ;GET THE POINTER
AOS S1,1 ;BUMP THE LENGTH
ANDI S1,777 ;GET LENGTH OF BLOCK
STORE S1,.MSTYP(M),MS.CNT ;SAVE MESSAGE SIZE
SUBI S1,.OHDRS+1 ;GET LENGTH OF TEXT
STORE S1,ARG.HD(T1),AR.LEN ;SAVE THE LENGTH
AOS .OARGC(M) ;BUMP ARGUMENT COUNT
MOVE S1,M ;ADDRESS OF MESSAGE
PUSHJ P,I%SOPR ;SEND THE MESSAGE
$HALT ;HALT THE OPR
$RETT ;RETURN
SETTXT: IDPB S1,TEMPTR ;SAVE THE DATA
$RETT ;RETURN
DEFINE X(A,B),<
EXP [ITEXT B]
>;END X
OPRTXT: ERROPR ;ERROR CODES FOR OPR
SUBTTL PUSHRT ROUTINE TO PUSH FOR THE -20
TOPS20 <
PUSHRT:: SKIPE REMOPR ;REMOTE OPERATOR?
JRST NOREMT ;NO REMOTE PUSHS ALLOWED
PUSHJ P,P$NPRO## ;NO PROCESSING REQUIRED
SKIPE S1,FRKHND ;ALREADY HAVE A FORK WITH EXEC
JRST PUSH.1 ;GO TO PUSH RETURN
MOVX S1,GJ%SHT!GJ%OLD ;SHORT FORM, OLD FILE
HRROI S2,[ASCIZ/SYSTEM:EXEC.EXE/]
GTJFN
JRST NOEXEC ;NO EXEC
MOVEM S1,FRKJFN ;SAVE FORK JFN
MOVX S1,CR%CAP ;GIVE FORK CAPABILITIES
CFORK ;CREATE THE FORK
JRST NOFORK
MOVEM S1,FRKHND ;SAVE FORK HANDLE
HRLZS S1 ;PLACE IN LEFT HALF
HRR S1,FRKJFN ;JFN IN THE FIGHT HALF
GET ;NOW GET THE EXEC INTO THE LOWER FORK
MOVEI S1,.FHSLF ;DONT ALLOW LOWER FORK TO LOG OUT
RPCAP ;GET CAPABILITIES OF INFERIOR
TXZ S2,SC%LOG ;DO NOT ALLOW LOGOUT
SETZ T1, ;NO PRIVILEGES ENABLED
MOVE S1,FRKHND ;GET THE FORK HANDLE
EPCAP ;SET ITS CAPABILITIES
ERJMP NOCAP ;TRAP THE ERROR
MOVEI S1,.FHJOB ;GET THE JOB HANDLE
TXO S1,RT%DIM ;GET DEFERRED ALSO
RTIW ;READ TERMINAL INTERRUPT CHARACTERS
DMOVEM S2,SAVTWD ;SAVE TERMINAL WORDS
MOVEI S1,.PRIIN ;PRIMARY INPUT JFN
RFMOD ;GET THE MODE
MOVEM S2,SAVMOD ;SAVE THE MODE
MOVE S1,FRKHND ;GET THE FORK HANDLE
PUSH.1: SETZ S2, ;USE PRIMARY START ADDRESS
SFRKV ;START THE EXEC
SETOM FRKRUN ;SETOM FORK RUN
$RETT ;RETURN
NOEXEC: MOVEI S2,[ASCIZ/Unable to find SYSTEM:EXEC.EXE for PUSH Command/]
$RETF ;RETURN FALSE
NOFORK: MOVEI S2,[ASCIZ/Unable to Create Fork for PUSH Command/]
$RETF ;RETURN FALSE
NOREMT: MOVEI S2,[ASCIZ/PUSH Command not allowed for Remote Operators/]
$RETF ;RETURN FALSE
NOCAP: MOVE S1,FRKHND ;GET THE FORK HANDLE
KFORK ;KILL THE PROCESS
ERJMP .+1 ;IGNORE THE ERROR
SETZM FRKHND ;CLEAR THE FORK HANDLE
MOVEI S2,[ASCIZ/Unable to Enable Forks Capabilities for PUSH command/]
$RETF ;RETURN FALSE
> ;END TOPS20
SUBTTL TERMFK FORK TERMINATION INTERRUPT CODE
TOPS20 <
TERMFK: $BGINT 1 ;INIT INTERRUPT LEVEL
SKIPN FRKRUN ;WERE WE RUNNING
$DEBRK ;IGNORE IT
; $STOP(FTE,Fork Termination Error Fork was not Running)
SETZM FRKRUN ;CLEAR THE RUNNING FORK FLAG
MOVX S1,.PRIIN ;GET PRIMARY INPUT
MOVE S2,SAVMOD ;GET THE MODE
SFMOD ;SET OLD MODE BACK
MOVX S1,ST%DIM ;SET ALL WORDS
HRRI S1,.FHJOB ;FOR THE JOB
DMOVE S2,SAVTWD ;GET TERMINAL WORDS
STIW ;SET THE WORDS
ERJMP .+1 ;IGNORE THE ERROR..
$DEBRK ;DEBRK THE INTERRUPT
> ;END TOPS20
SUBTTL OPRSON OPR SIGNON TO ORION
;THIS ROUTINE WILL SEND THE OPR HELLO MESSAGE TO ORION AND
;THEN WAIT FOR THE ORION SETUP. THE ORION SETUP WILL BE FOLLOWED
;BY A SETUP REPLY AND THE OPR WILL BE READY FOR COMMANDS.
OPRSON: PUSHJ P,M%GPAG ;GET A PAGE FOR THE HELLO
MOVE M,S1 ;SAVE ADDRESS IN M
MOVX S1,.OMOHL ;OPR HELLO MESSAGE
STORE S1,.MSTYP(M),MS.TYP ;SAVE THE TYPE
MOVX S1,OPH.SZ+.OHDRS ;SIZE OF THE MESSAGE
STORE S1,.MSTYP(M),MS.CNT ;SAVE THE SIZE
AOS .OARGC(M) ;BUMP COUNT TO 1
MOVX S1,.OPHEL ;OPR HELLO BLOCK
STORE S1,ARG.HD+.OHDRS(M),AR.TYP ;SAVE THE TYPE
MOVX S1,OPH.SZ ;SIZE OF ARGUMENT BLOCK
STORE S1,ARG.HD+.OHDRS(M),AR.LEN ;SAVE THE LENGTH
MOVE S1,MYNODE ;GET CURRENT LOCATION
STORE S1,OPH.ND+.OHDRS(M) ;SAVE THE NODE
MOVX S1,%%.OPR ;ORNMAC VERSION NUMBER
STORE S1,OPH.OV+.OHDRS(M) ;SAVE IN BLOCK
MOVX S1,%%.OPV ;OPRS VERSION NUMBER
STORE S1,OPH.VN+.OHDRS(M) ;SAVE IN BLOCK
TOPS20 <
MOVX S1,OP.RMT ;GET REMOTE OPERATOR FLAG
SKIPE REMOPR ;ARE WE A REMOTE OPERATOR
IORM S1,.OFLAG(M) ;YES..TURN ON THE FLAG
> ;END TOPS20
MOVE S1,M ;PLACE MESSAGE ADDRESS IN S1
PUSHJ P,I%SOPR ;SEND THE MESSAGE TO ORION
SKIPT ;CONTINUE IF SEND O.K.
$STOP(OSF,ORION SEND FAILED) ;CAN'T INITIATE DIALOG
OPRS.1: PUSHJ P,C%BRCV ;BLOCKING RECEIVE THE MESSAGE
PUSHJ P,VALMSG ;VALIDATE THE MESSAGE
JUMPT OPRS.3 ;O.K. CONTINUE ON
OPRS.2: PUSHJ P,C%REL ;NO GOOD..TRY AGAIN
JRST OPRS.1 ;WAIT FOR ANOTHER MESSAGE
OPRS.3: LOAD M,MDB.MS(S1),MD.ADR ;ADDRESS OF RECEIVED MESSAGE
LOAD T1,.MSTYP(M),MS.TYP ;GET THE MESSAGE TYPE
CAIE T1,.OMOST ;OPERATOR SETUP MESSAGE
JRST OPRS.4 ;NO..TRY TEXT COULD BE ERROR
PUSHJ P,OPRRST ;OPR REPLY TO SETUP
SKIPT ;O.K...PROCEED
$STOP(SFO,SETUP FAILURE BY OPR)
PJRST C%REL ;RELEASE THE PAGE AND RETURN
OPRS.4: CAIE T1,MT.TXT ;ERROR TEXT MESSAGE
JRST OPRS.2 ;NO..TRY AGAIN
PUSHJ P,ACKOPR ;PROCESS AS ACK OPR
PUSHJ P,I%EXIT ;EXIT TO COMMAND LEVEL
SUBTTL OPRRST OPR REPLY TO SETUP
;THIS ROUTINE WILL PROCESS THE SETUP AND SEND THE
;APPROPRIATE REPLY TO ORION.
OPRRST: SKIPE .OARGC(M) ;ANY ARGUMENTS SPECIFIED
JRST OPRR.1 ;YES PROCESS THE MESSAGE
PJRST SETREP ;SEND SETUP REPLY AND RETURN
OPRR.1: $RETF ;****NOT SUPPORTED YET
SUBTTL SETREP SETUP REPLY MESSAGE
;THIS ROUTINE WILL SEND A SETUP REPLY TO ORION SAYING THAT ALL
;IS O.K.
SETREP: PUSHJ P,SETMES ;SETUP THE MESSAGE
MOVE S1,M ;ADDRESS OF THE MESSAGE
PUSHJ P,I%SOPR ;SEND TO ORION
JUMPT .POPJ ;ALL O.K.
$STOP(SDF,SETUP DIALOG FAILED)
SUBTTL SETMES SETUP MESSAGE REPLY
SETMES: PUSHJ P,M%GPAG ;GET A PAGE OF MEMORY
MOVE M,S1 ;SAVE THE ADDRESS IN M
MOVX S1,.OMOSR ;SETUP REPLY CODE
STORE S1,.MSTYP(M),MS.TYP ;SAVE THE TYPE
MOVX S1,1 ;LENGTH OF THE ARGUMENT
STORE S1,ARG.HD+.OHDRS(M),AR.LEN ;SAVE LENGTH
MOVX S1,.ORSUC ;GET SUCCESS CODE
STORE S1,ARG.HD+.OHDRS(M),AR.TYP ;SAVE THE TYPE
MOVX S1,.OHDRS+1 ;SIZE OF THE MESSAGE
STORE S1,.MSTYP(M),MS.CNT ;SAVE THE COUNT
MOVE S1,M ;PUT ADDRESS IN S1
AOS .OARGC(M) ;BUMP ARGUMENT COUNT
POPJ P, ;RETURN
SUBTTL TABCHK ROUTINE TO CHECK OUT TABLES
;THIS ROUTINE WILL CHECK OUT THE ENTRY BLOCK SETUP BY
;EACH TABLE FOR THE PROPER LENGTH AND NON-ZERO ENTRIES
TABCHK: MOVEI T3,SYNTAB ;ADDRESS OF TABLE OF TABLES
MOVE T1,(T3) ;GET THE FIRST TABLE
SKIPN T2,TABNUM ;NON-ZERO NUMBER OF ENTRIES
$STOP(ZTS,ZERO TABLES SETUP FOR OPR)
JRST TABC.1 ;SKIP BUMPING TO NEXT TABLE
TABC.0: ADDI T3,1 ;BUMP TO NEXT ENTRY
SKIPN T1,(T3) ;BUMP TO NEXT TABLE ADDRESS
$STOP(MST,MISSING SYNTAX TABLE)
TABC.1: LOAD S1,TAB.HD(T1),TB.LEN ;LENGTH OF BLOCK
CAIGE S1,TAB.SZ-1 ;GREATER OR EQUAL TO LENGTH
$STOP(WLT,WRONG LENGTH TABLE ENTRY BLOCK)
SKIPE TAB.IN(T1) ;ZERO INIT TABLE
SKIPN TAB.KY(T1) ;OR ZERO KEYWORD TABLE
$STOP(ZTE,ZERO ENTRY IN SYNTAX TABLE ENTRY BLOCK)
SOJG T2,TABC.0 ;CHECK OUT ALL TABLES
MOVE S1,SYNTAB ;ADDRESS OF MAIN OPR TABLES
MOVE S2,TAB.KY(S1) ;ADDRESS OF MAIN KEYWORD TABLE
MOVEM S2,DEFTAB ;SAVE AS DEFAULT TABLES
TABC.2: MOVSI S2,-<NUMAPL> ;GET NUMBER OF ENTRIES
TABC.3: SKIPN T1,SYNTAB+1(S2) ;GET THE TABLE ENTRY
JRST TABC.4 ;SKIP IT TRY NEXT
MOVE T2,TAB.KY(T1) ;GET THE KEYWORD TABLE
HRRZ T3,KEYAP1+1(S2) ;ADDRESS OF SYMBOL AND NEXT
HRRM T2,(T3) ;SETUP TABLE POINTER
TABC.4: AOBJN S2,TABC.3 ;CHECK FOR MORE
POPJ P, ;RETURN
SUBTTL GETLOC GET OPRS LOCATION
;THIS ROUTINE WILL DETERMINE THE JOBS LOCATION AND STORE THE
;VALUE IN MYNODE.
GETLOC: SETOM S1 ;GET MY LOCATION
MOVX S2,JI.LOC ;GET THE JOBS LOCATION
PUSHJ P,I%JINF ;GET THE LOCATION
SKIPT ;SKIP IF O.K.
SETZ S2, ;MAKE 0 FOR NOW
MOVEM S2,MYNODE ;SAVE AS MYNODE
$RETT ;RETURN
ENTVEC: JRST OPR ;MAIN ENTRY POINT
JRST OPRRMT ;REMOTE OPR ENTRY
EXP %%.OPV ;VERSION
END <3,,ENTVEC>