Google
 

Trailing-Edge - PDP-10 Archives - BB-H138E-BM - 6-1-sources/linsert.bli
There are 10 other files named linsert.bli in the archive. Click here to see a list.
 %TITLE 'LINSERT - insert text'
MODULE LINSERT (				! Insert text
		IDENT = '3-005'			! File: LINSERT.BLI Edit: CJG3005
		) =
BEGIN
!
!			  COPYRIGHT (c) 1981, 1985 BY
!	      DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
!		ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND  COPIED
! ONLY  IN  ACCORDANCE  WITH  THE  TERMS  OF  SUCH  LICENSE AND WITH THE
! INCLUSION OF THE ABOVE COPYRIGHT NOTICE.  THIS SOFTWARE OR  ANY  OTHER
! COPIES  THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
! OTHER PERSON.  NO TITLE TO AND OWNERSHIP OF  THE  SOFTWARE  IS  HEREBY
! TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE  WITHOUT  NOTICE
! AND  SHOULD  NOT  BE  CONSTRUED  AS  A COMMITMENT BY DIGITAL EQUIPMENT
! CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR  RELIABILITY  OF  ITS
! SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
!

!++
! FACILITY:	EDT -- The DEC Standard Editor
!
! ABSTRACT:
!
!	This module executes the line mode INSERT command.
!	It also provides support for the insert part of the
!	REPLACE command.
!
! ENVIRONMENT:	Runs at any access mode - AST reentrant
!
! AUTHOR: Bob Kushlis, CREATION DATE: February 3, 1978
!
! MODIFIED BY:
!
! 1-001	- Original.  DJS 30-JAN-81.  This module was created by
!	extracting routines INSERT and INS_COM from EXEC.BLI.
! 1-002	- Regularize headers.  JBS 20-Mar-1981
! 1-003	- Change INS_COM to EDT$$INS_CMD .  JBS 30-Mar-1981
! 1-004	- Do prompting from a global.  JBS 23-Oct-1981
! 1-005 - Add error check for too many lines.  SMB 5-Feb-1982
! 1-006 - Reset command buffer after EOF. STS 23-Jun-1982
! 1-007 - Add CRLF for EXT insert and replace commands.  SMB 07-Jul-1982
! 1-008 - Change indentation for large line numbers.  SMB 14-Jul-1982
! 1-009 - Use previous line size instead of current.  SMB 15-Jul-1982
! 1-010 - Put code for edt$$rng_posfrst in line. STS 11-Oct-1982
! 1-011 - Use new macro for comparing line numbers. STS 20-Oct-1982
! 1-012	- Don't print CRLF unless we are coming from the terminal.  JBS 19-Jan-1983
! 3-001 - Modify for the TOPS 20 parser. CJG 14-Mar-1983
! 3-002 - Add updates from V3 sources.  GB 29-Apr-1983
! 3-003 - Prompts do not have leading <CR><LF>, and <CR><LF> needed before
!	  the call to EDT$$TY_CURLN. CJG 15-Jun-1983
! 3-004 - Fix a problem with journalling multicommand lines, especially INSERT\...
!	  CJG 10-Jan-1984
! 3-005 - Modify ASSERT macro to include error code. CJG 30-Jan-1984
!--


%SBTTL 'Declarations'
!
! TABLE OF CONTENTS:
!

REQUIRE 'EDTSRC:TRAROUNAM';

FORWARD ROUTINE
    EDT$$INS_TXT : NOVALUE,			! Insert text
    EDT$$INS_CMD : NOVALUE;			! Process the INSERT command

!
! INCLUDE FILES:
!

REQUIRE 'EDTSRC:EDTREQ';

!
! MACROS:
!
!	NONE
!
! EQUATED SYMBOLS:
!
!	NONE
!
! OWN STORAGE:
!
!	NONE
!
! EXTERNAL REFERENCES:
!
!	In the routines

%SBTTL 'EDT$$INS_TXT  - insert text'

GLOBAL ROUTINE EDT$$INS_TXT 			! Insert text for INSERT and REPLACE commands
    : NOVALUE =

!++
! FUNCTIONAL DESCRIPTION:
!
!	This routine handles the insertion of text from an INSERT or REPLACE
!	command.  If the current token from the parser is a '\', then the text
!	to be inserted is the remainder of the command line.  Otherwise, loop
!	reading a line and inserting it until an end of file is detected.
!
! FORMAL PARAMETERS:
!
!	NONE
!
! IMPLICIT INPUTS:
!
!	CMD_END
!	CMD_LEN
!	CMD_PTR
!	INP_SRC
!	NOS
!	PA_CURTOK
!	PA_CURTOKLEN
!	PMT_INS
!	PMT_INSN
!
! IMPLICIT OUTPUTS:
!
!	CMD_BUF
!
! ROUTINE VALUE:
!
!	NONE
!
! SIDE EFFECTS:
!
!	NONE
!
!--

    BEGIN

    EXTERNAL ROUTINE
	EDT$$CMP_LNO,
	EDT$$FMT_CRLF,
	EDT$$TI_WRSTR,
	EDT$$GET_LN,
	EDT$$END_INS,
	EDT$$INS_LN,
	EDT$$START_INS,
	EDT$$TI_BUFSTR,			! Save a journal record
	EDT$$TI_FLUSHJOUFI,		! Write a journal record
	EDT$$TY_CURLN;			! Type out the current line

    EXTERNAL
	WK_STARTNO : LN_BLOCK,
	LNO0 : LNOVECTOR [14],
	FMT_WRRUT,
	EXT_MOD,
	CMD_BUF,
	CMD_END,
	CMD_LEN,
	CMD_PTR,
	INP_SRC,
	RCOV_MOD,			! Recovery mode (for journalling)
	JOU_VALID,			! Validity of journal record
	NOS,				! 1 = numbers, 0 = nonumbers
	PA_MORE,			! More on current line indicator
	PA_CURTOK,			! Pointer to remainder of input
	PA_CURTOKLEN,			! Length of remainder
	PMT_INS : VECTOR,		! Counted ASCII string for line-mode insert prompt
	PMT_INSN : VECTOR;		! Counted ASCII string for line-mode insert nonumbers prompt

    LOCAL
	BIG_LINE_PMT : VECTOR [32],	! Prompt for lines larger than 10**5
	STATUS,
	EOF;

!+
! Set up the work-file system for insertion
!-

    EDT$$START_INS ();

!+
! Look for the immediate insertion signaled by a '\' following the command.
! Don't insert the <CR><LF> at the end of the line.
!-

    IF (.PA_MORE NEQ 0) THEN
	BEGIN
	EDT$$TI_BUFSTR (CH$PTR (CMD_BUF,, BYTE_SIZE), .CMD_LEN + .PA_CURTOKLEN - 2);
	JOU_VALID = 1;
	IF ( NOT .RCOV_MOD) THEN EDT$$TI_FLUSHJOUFI (%C'T');
	EDT$$INS_LN (.PA_CURTOK, .PA_CURTOKLEN - 2);
	PA_MORE = 0;
	END
    ELSE

!+
! Insert mode loop.  Keep reading and inserting lines until EOF or until
! the maximum number of lines has been reached for this buffer
!-
	BEGIN

	IF (.EXT_MOD AND (.FMT_WRRUT EQL EDT$$TI_WRSTR) AND (.INP_SRC EQL INP_TERM))
	THEN
	    EDT$$FMT_CRLF ();

!+
! Set up the prompt for large lines just in case we need it later
! (only want to do this once.  To do this we add 5 spaces after the
! <CR><LF> in the prompt.
!-

	IF (.NOS EQL 1)
	THEN
	    BEGIN
	    BIG_LINE_PMT [0] = .PMT_INS [0] + 5;
	    CH$MOVE (.PMT_INS [0], CH$PTR (PMT_INS [1],, BYTE_SIZE),
				   CH$PTR (BIG_LINE_PMT [1], 5, BYTE_SIZE));
	    CH$FILL (%C' ', 5, CH$PTR (BIG_LINE_PMT [1],, BYTE_SIZE));
	    END;

	DO
	    BEGIN

	    LOCAL
		PROMPT_ADDR : REF VECTOR;

	    IF (EDT$$CMP_LNO (WK_STARTNO, LNO0 [10]) GEQ 0) AND (.NOS EQL 1)
	    THEN
		PROMPT_ADDR = BIG_LINE_PMT
	    ELSE
		PROMPT_ADDR = (CASE .NOS FROM 0 TO 1 OF
		    SET
		    [0] : PMT_INSN;
		    [1] : PMT_INS;
		    [OUTRANGE] :
			BEGIN
			ASSERT (15, 0);
			0
			END;
		    TES);

	    EOF = EDT$$GET_LN (0, PROMPT_ADDR [1], .PROMPT_ADDR [0]);

	    IF (( NOT .EOF) OR (.CMD_LEN NEQ 0))
	    THEN
		STATUS = EDT$$INS_LN (CH$PTR (CMD_BUF,, BYTE_SIZE), .CMD_LEN)

	    END
	UNTIL ((.EOF) OR ( NOT .STATUS));

	END;

    IF .EOF
    THEN
	BEGIN
	CMD_END = CH$PTR(CMD_BUF,, BYTE_SIZE);
	CMD_PTR = CH$PTR(CMD_BUF,, BYTE_SIZE);
	END;

!+
! Inform the work file system that the insert is complete, and print
! the next line.
!-
    EDT$$END_INS ();

    IF (.INP_SRC EQL INP_TERM)
    THEN
	BEGIN
	EDT$$FMT_CRLF ();
	EDT$$TY_CURLN ();
	END;

    END;

%SBTTL 'EDT$$INS_CMD  - INSERT line-mode command'

GLOBAL ROUTINE EDT$$INS_CMD 			! INSERT line-mode command
    : NOVALUE =

!++
! FUNCTIONAL DESCRIPTION:
!
!	Command processing routine for the INSERT command.   Position to the
!	specified range and, if it positioned successfully,  do the insert.
!
! FORMAL PARAMETERS:
!
!	NONE
!
! IMPLICIT INPUTS:
!
!	EXE_CURCMD
!
! IMPLICIT OUTPUTS:
!
!	NONE
!
! ROUTINE VALUE:
!
!	NONE
!
! SIDE EFFECTS:
!
!	NONE
!
!--

    BEGIN

    EXTERNAL ROUTINE
	EDT$$RNG_REPOS;

    EXTERNAL
	RNG_FRSTLN,
	CUR_BUF : REF TBCB_BLOCK,
	RNG_ORIGPOS : POS_BLOCK,
	EXE_CURCMD : REF NODE_BLOCK;	! Pointer to the current command.

 	RNG_FRSTLN = 1;
    EDT$$CPY_MEM (POS_SIZE, .CUR_BUF, RNG_ORIGPOS);

    IF EDT$$RNG_REPOS (.EXE_CURCMD [RANGE1])
    THEN
	BEGIN
	EDT$$INS_TXT ();
	END;

    END;


END
ELUDOM