Google
 

Trailing-Edge - PDP-10 Archives - BB-H138F-BM_1988 - 7-sources/zerboo.mac
There are 3 other files named zerboo.mac in the archive. Click here to see a list.
TITLE ZERBOO -- DYNBOO extensions for calling from section zero

;
;	COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1984, 1986.
;	ALL RIGHTS RESERVED.
;
;	THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY  BE  USED  AND
;	COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH
;	THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE.   THIS  SOFTWARE  OR
;	ANY  OTHER  COPIES  THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE
;	AVAILABLE TO ANY OTHER PERSON.  NO TITLE TO AND OWNERSHIP OF  THE
;	SOFTWARE IS HEREBY TRANSFERRED.
;
;	THE INFORMATION IN THIS SOFTWARE IS  SUBJECT  TO  CHANGE  WITHOUT
;	NOTICE  AND  SHOULD  NOT  BE CONSTRUED AS A COMMITMENT BY DIGITAL
;	EQUIPMENT CORPORATION.
;
;	DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR  RELIABILITY  OF
;	ITS SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
;

SEARCH DDBSYM, MONSYM, MACSYM
SEARCH DYNSYM

SALL
SUBTTL Edit History

; Version 1.0

;.EDIT 1	Put in section-zero call support
;		DDB,4-APR-84,SPR:NONE

;.EDIT 2	Put in recursive call from section zero
;		DDB,9-APR-84,SPR:NONE

;.EDIT 6	DY$ZMD shouldn't trash T1
;		DDB,17-MAY-84,SPR:NONE

; Version 1.1

;.EDIT 50	Formally go to version 1.1, update copyright, insert V1.1
;			development changes (formally V2)
;		DDB,15-Jan-85,SPR:NONE
;.EDIT 51	Add GLOBbing in build procedure, make DY$CBK work from JCK.
;		DDB,30-Apr-85,SPR:NONE
;.EDIT 52	Fix handling of stack pointer in DY$ZMD/DY$ZMU (routines with
;			stack args removed in the routine confused it)
;		DDB-3-MAY-85,SPR:NONE
;.EDIT 53	Add some automatic initialization for programs calling from 0.
;		DDB,6-May-85,SPR:NONE
; When attempting to call a dynamic library from section zero, two things
; must be done:
;   1.  Section zero must be mapped to a nonzero section, and PC moved
;	into the new section.
;   2.	The stack pointer must be made global.
; These things must be done without destroying the users data in ACs or
; on the stack, so that the interface to the subroutine is not restricted.

; The sequence selected to perform this is as follows:
; The libZER file will look like a libJCK file (q.v.) except that the
; code sequence at each entry name will be as follows:
;
;RT1:	;Stack level on entry will be called "SP0"
;	CALL DY$ZMU		;Map up to non-zero section and change stack
;				;It also stores the user return into .ZYURA
;				;and removes that word from the stack
;				;Stack returned at SP0-1
;	CALL @TV+n		;Now go to the proper routine as per libJCK
;				;Stack level now SP0-1
;	CALL DY$ZMD		;Map back down
;				;Stack level SP0
;	RET DY.ZMV		;Return to user location
;				;(The Y field is info used in DY$CBK
;				;and probably elsewhere to find things
;				;in ZERBOO from a library)
;
; The section that section 0 is mapped into (if necessary) is specified
; by DY.ZMS.  The content of this location is initially 1.  Note that this
; should be the first non-zero section allocated, since this happens on the
; first call to the RTL.
DY.ZMS:: 1

; When section zero is actually mapped somewhere, the somewhere is recorded
; here.
DY.SEC:: 0			;Section 0 mapped to this section number

; Pointer to special stack for recursive calls from section zero
DY.ZBL:: IFIW DY.BLK-1

; Stack of ZY blocks
DY.BLK:: BLOCK 10*.ZYLEN

; Vector of addresses in ZERBOO, for use from libraries (it's found by
; looking at the Y field of the RET instruction after the DY$ZMD call)
DEFINE ZVENT (OFFSET,CONTENTS) <
    IFN .-DY.ZMV-OFFSET, <PRINTX ZV entry OFFSET out of order
>
    EXP CONTENTS
>
DY.ZMV:: ZVENT (.ZVCNT,.ZVLEN)	;Counted vector
	ZVENT (.ZVBKR, <IFIW DY$BKR>)
	ZVENT (.ZVZBL, <IFIW DY.ZBL>)
	ZVENT (.ZVSEC, <IFIW DY.SEC>)
	ZVENT (.ZVCS0, <IFIW DY$CS0>)
SUBTTL DY$ZMU -- Map up to non-zero section, change stack

; This routine is called from the per-routine code in a libZER interface file.

; Arguments:
;	DY.ZBL/	Address of last-used ZY block

; Stack setup:
;	SP0/	User call retadr
;	(P)/	retadr

DY$ZMU::

	ADJSP P, 6		;Stack at SP0+7
	DMOVEM T0, -5(P)
	DMOVEM T2, -3(P)
	DMOVEM T4, -1(P)
	MOVX T5, .ZYLEN
	ADDB T5, DY.ZBL		;Push onto ZY stack
	SETZB T0, .ZYRTZ(T5)	;Assume we're in a non-zero section
	SETZ T3,		;[51] Assume we won't do SMAP%
	XHLLI T0, 1000		;Find out
	JUMPN T0, ZMUNOZ	;Jump if assumption was true

; We are in section zero.  Remember this, choose a section, and map up.
	SETOM .ZYRTZ(T5)
	SKIPE DY.SEC		;Skip if no section allocated
	  JRST ZMUGOS

; Map section via indirect pointer to section 0
	MOVX T1, <.FHSLF,,0>
	MOVE T2, DY.ZMS		;Section we've been asked to map to
	MOVEM T2, DY.SEC	;Record section we mapped to
	HRLI T2, .FHSLF
	MOVX T3, <SM%IND!SM%RD!SM%WR!SM%EX!1> ;All access, indirect
	SMAP%
	  ERCAL DY$FJE##	;This is provided in DY$BOO
	SETO T3,		;[51] Flag that we did SMAP%

; Move PC into the new section
ZMUGOS:	SETZ T1,
	HRL T2, DY.SEC
	HRRI T2, ZMUNOZ		;Address to jump to
	XJRSTF T1

; We're in a non-zero section.  Worry about the stack now.
ZMUNOZ:	MOVE T1, P		;Copy of P (at SP0+7)
; [52]	ADJSP T1, -3		;Adjust to SP0+4 for DY$ZMD
	MOVEM T1, .ZYSP(T5)	;[52] Save LH/RH relationship of SP
	SKIPG T1		;Skip if already global
	  XHLLI P, 1000		;Make global current section if necessary

; Modify retadr to return into non-zero section
	XHLLI T1, 1000		;Get current section number
	HLLM T1, -6(P)		;Put over flags in saved PC word

; Put away the user retadr
	MOVE T1, -7(P)		;Get user retadr
	MOVEM T1, .ZYURA(T5)	;Store for use after call

; [51]
; If we were actually called from zero,
; make sure RTL is initialized, then store dy.sec (this section) into
; dy.zmp (galactic from rtl) so dy$cbk can tell what section represents
; a call from section zero.
	JUMPE T3, ZMURST	;[51] Jump if we didn't do SMAP%


; [53]
; On first call from zero, do special initializations.  This must happen
; before anything that could cause an nxp from a non-zero section (such
; as master-initializing the RTL, which will happen when the call in the
; next chunk is executed).
; 
; First special initialization: if interrupt tables exist in section zero,
; turn off .ICNXP (page create) and .ICIRD (illegal read) interrupts.
	ADJSP P, 3		;[53] Allocate return value block
	MOVX T1, .FHSLF		;[53]
	XMOVEI T2, -2(P)	;[53]
	MOVX T3, 3		;[53] Block length
	MOVEM T3, -2(P)		;[53]
	XRIR%			;[53]
	  ERJMP ZMUDIC		;[53]
	HLRZ T1, -1(P)		;[53] Get section of level table
	JUMPN T1, ZMUFIN	;[53] Not in zero, don't disable
ZMUDIC:	MOVX T1, .FHSLF		;[53]
	MOVX T2, <1B<.ICNXP>!1B<.ICIRD>> ;[53]
	DIC%			;[53]
	  ERJMP .+1		;[53] Ignore errors
ZMUFIN:	ADJSP P, -3		;[53] De-allocate return value block

; [53] Second special initialization:
; [53] Store ZMS into galactic variable
	CALL @RL.CTV##+.RLNUL	;[51] CALL RL$NUL via vector
				;[51] (we are mapped up and stack is global)
	MOVE T1, DY.SEC		;[51] Get section zero was mapped to
	MOVEM T1, @DY.ZMP##	;[51] Store where RTL can get it

; Restore our saved registers 
ZMURST:	DMOVE T2, -3(P)		;[51] Add label
	DMOVE T0, -5(P)
	MOVE T5, -6(P)		;Get retadr
	MOVEM T5, -7(P)		;Store over user retadr
	DMOVE T4, -1(P)		;Restore T4, T5
	ADJSP P, -7		;Adjust to SP0
	RET			;Stack at SP0-1
SUBTTL DY$ZMD -- Return to section and stack mode where we started

; Using the saved information in the ZY block pointed at by DY.ZBL

; Arguments:
;	DY.ZBL/	Address of ZY block for our use

; Stack setup:
;	P/	retadr		(SP0)

; NOTE: Because this knows stack layout in detail, it must not be called
; with a CALRET or equivalent!!

DY$ZMD::

	ADJSP P, 4		;Stack at SP0+4
	DMOVEM T1, -3(P)	;Save T1, T2
	DMOVEM T3, -1(P)	;Save T3, T4
	XMOVEI T4, @DY.ZBL	;Get address of ZY block
; [52]	MOVE P, .ZYSP(T4)	;Restore SP (particularly LH of local one,
; [52]				;otherwise this should cause no change)

	SKIPL .ZYSP(T4)		;[52] Skip if was local
	  JRST ZMDSPG		;[52] Was global, leave alone
	HLRE T1, .ZYSP(T4)	;[52] Get saved LH of SP as word quantity
	HRRZ T2, .ZYSP(T4)	;[52] Get saved RH of SP
	SUB T1, T2		;[52] Saved LH - saved RH
	HRRZ T2, P		;[52] Current RH
	ADD T1, T2		;[52] Saved LH + current RH - saved RH
	HRL P, T1		;[52] becomes new RH

ZMDSPG:				;[52] Stack pointer good

; Return to section zero, if we came from there originally (in DY$ZMU).
	SKIPN .ZYRTZ(T4)	;Skip if we are to Return To section Zero
	  JRST ZMDSOK		;Already in right section

	SETZB T1, T2		;Section to return to is zero, if anything
	HRRI T2, ZMDSOK
	HLLM T1, -4(P)		;Zero LH of return address (which contains
				;section we mapped in to)
	XJRSTF T1		;Return to our section zero

; Now we are in the right section, and stack is ok.  Clean up.
ZMDSOK:	DMOVE T1, -3(P)		;Restore T1, T2
	MOVE T3, -4(P)		;[6] Get retadr
	MOVEM T3, -3(P)		;[6]
	MOVE T3, .ZYURA(T4)	;[6]
	MOVEM T3, -4(P)		;[6]
	MOVX T3, -.ZYLEN	;[6]
	ADDM T3, DY.ZBL		;[6]
	DMOVE T3, -1(P)		;[6] Restore T3, T4
	ADJSP P, -3		;SP0+1
	RET			;SP0
SUBTTL DY$BKR -- Return from callback routine

; When a routine in zero must be called from a non-zero section (such as
; an error handling routine being called by a dynamic library), assistance
; is needed on the call and the return.  This routine provides the assistance
; on the return.

; Arguments:
;	DY.ZBL/	Address of one-word return address

DY$BKR::

	ADJSP P, 3		;Make work space
	DMOVEM T1, -1(P)
	XMOVEI T1, 0		;Are we in Zero?
	JUMPN T1, BKRNOZ	;No

; We are running in section zero.  Section zero is already mapped into some
; non-zero section (or we wouldn't have reached a dynamic library, and thus
; could never have ended up here during a callback); jump into that section.
	; T1 is zero
	HRL T2, DY.SEC
	HRRI T2, BKRNOZ
	HRL P, DY.SEC		;Global stack
	XJRSTF T1		;Go up to our tame non-zero section

; We are running in a non-zero section.
BKRNOZ:	MOVE T1, @DY.ZBL	;Get our true return address
	MOVEM T1, -2(P)		;Put it in first of three words reserved
	DMOVE T1, -1(P)		;Restore two registers saved
	ADJSP P, -2		;Return address now on top
	SOS DY.ZBL		;Pop from other stack
	RET			;Clean up and return to non-zero section
SUBTTL DY$CS0 -- Call into section zero

; This routine is called with a stack looking like this:
;	0,,DY$BKR
;	0,,address of routine we will call
; P/-->	New stack pointer to install in DY$CS0
;
; There may be args in any register, or at any previous point on the stack.
; Your mission, should you decide to accept it, is to get to the routine
; specified in section zero (we're in ZMS on entry), with the stack pointer
; that's on top of the stack (and unfortunately POP P, P has "indeterminate"
; results according to the hardware reference manual; this seems to mean that
; the value popped is thrown into the bit bucket on a KL with mocrocode 550),
; and get to the routine without trashing any registers and with as little
; delay as possible.  If you or any of your IFIW's are caught or killed, the
; support group will disavow any knowledge of your actions.  Good luck, sucker.

DY$CS0::

	EXCH T1, 0(P)		;Get stack pointer we wish to install
	MOVE P, T1		;Install it (stack points to same place,
				;but is now local instead of ZMS-global)
	POP P, T1		;Restore T1
	RET			;Go to routine in section zero

	END