Trailing-Edge
-
PDP-10 Archives
-
BB-JR93K-BB_1990
-
10,7/galaxy/lptspl/lptlp5.mac
There are 10 other files named lptlp5.mac in the archive. Click here to see a list.
TITLE LPTLP5 - LP05 class printer driver for LPTSPL-10
SUBTTL D. Mastrovito/DPM 16-OCT-89
;
;
; COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION
; 1984,1985,1986,1987,1990.
; ALL RIGHTS RESERVED.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
; AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS
; SOFTWARE OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
; OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE TO
; AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE
; WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
; BY DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
; OF ITS SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY
; DIGITAL.
;
SEARCH GLXMAC ;SEARCH GALAXY PARAMETERS
SEARCH QSRMAC ;SEARCH QUASAR PARAMETERS
SEARCH ORNMAC ;SEARCH ORION/OPR PARAMETERS
SEARCH LPTMAC ;SEARCH LPTSPL PARAMETERS
PROLOG (LPTLP5)
IF2,<PRINTX Assembling GALAXY-10 LPTLP5>
%%.LPT==:%%.LPT ;VERSION
SALL ;FOR CLEAN LISTINGS
.DIRECT FLBLST ;FOR CLEANER LISTINGS
ENTRY LPTLP5 ;LOAD IF LIBRARY SEARCH
SUBTTL LPTLP5 - Dispatch table
; This module will drive any LP05 class printer.
LPTLP5::DEVDSP (LP5,<LP05>)
LP5STS==LPTSTS## ;DEVICE STATUS TEXT
; Driver specific per-job data
.ORG J$DWDS ;DEFINE WORDS STARTING AT J$DWDS
LP5SIZ:! ;END OF DRIVER SPECIFIC DATA
LP5LP2:! BLOCK 1 ;VFU SIMULATION FLAG
.ORG
IF2,<
IFL <DRVWDS-<LP5SIZ-J$DWDS>>,<
PRINTX ? LP05 driver definitions overflow storage
>
> ;END IF2
SUBTTL LP5INX - Initialization
LP5INX: JUMPE M,.RETT ;RETURN IF LPTSPL INITIALIZATION
MOVE S1,STREAM## ;GET STREAM NUMBER
MOVE S1,JOBOBA##(S1) ;AND THE OBJECT BLOCK
MOVE S1,OBJ.ND(S1) ;GET STATION NUMBER
PUSHJ P,LPTANF## ;MUST BE ANF-10
JUMPF INIT.1 ;ELSE RETURN
SKIPN S1,SUP.ST(M) ;GET DEVICE NAME IF ANY
MOVSI S1,'LPT' ;ELSE WANT A NORMAL LPT
PUSHJ P,LPTDVN## ;GENERATE DEVICE NAME
MOVE T1,J$LDEV(J) ;GET DEVICE NAME
DEVCHR T1,UU.PHY ;GET DEVICE CHARACTERISTICS
TXNN T1,DV.LPT ;PROPER DEVICE TYPE?
JRST INIT.1 ;NOT FOR US
MOVE T1,[2,,T2] ;SET UP UUO AC
MOVEI T2,.DFHCW ;FUNCTION CODE
MOVE T3,J$LDEV(J) ;DEVICE NAME
DEVOP. T1,UU.PHY ;READ HARDWARE CHARACTERISTICS
JRST INIT.1 ;FAILED??
LOAD T1,T1,DF.CLU ;GET THE UNIT TYPE
CAIE T1,.DFUFG ;LP05 CLASS PRINTER?
CAIN T1,.DFUUK ;ASSUME UNKNOWN IS AN LP05 CLASS
TRNA ;EITHER WINS, ELSE...
JRST INIT.1 ;TRY ANOTHER DRIVER
MOVE T1,['LP05 '] ;UNIT TYPE IDENTIFIER
MOVEM T1,J$LTYP(J) ;SAVE PRINTER CLASS FOR QUASAR
HRLZI T1,LPTLP5 ;POINT TO DISPATCH TABLE
HRRI T1,J$$DEV(J) ;MAKE A BLT POINTER
BLT T1,J$$DND(J) ;COPY INTO JOB STORAGE AREA
SETOM J$POSF(J) ;LP05 DOES POSITIONING
SETOM J$FFDF(J) ;LP05 DOES FORM FEEDS
SETOM J$DC3F(J) ;LP05 SUPPORTS DC3 IN BANNER
SETOM J$MNTF(J) ;LP05 SUPPORTS MOUNTABLE FORMS
SKIPN J$LREM(J) ;SEE IF LOCAL OR REMOTE PRINTER
SKIPA S1,[.OFLNO] ;LOCAL, DON'T SIMULATE BY DEFAULT
MOVX S1,.OFLYE ;REMOTE, SIMULATE BY DEFAULT
LOAD S2,SUP.FL(M),SUFLP2 ;GET OPR-SET SIMULATION
CAIN S2,.OFLDF ;DEFAULTED?
MOVE S2,S1 ;YES, USE DEFAULT
SETZM LP5LP2(J) ;ASSUME NO LP20-SIMULATION
CAIE S2,.OFLNO ;GUESS RIGHT?
SETOM LP5LP2(J) ;NOPE, LP20-SIMULATION WANTED
SKIPE LP5LP2(J) ;SIMULATING LP20?
PUSHJ P,VFUINX## ;YES, INITIALIZE THE SIMULATOR
SETZ TF, ;MAKE EXTRA ATTRIBUTE WORD
STORE S2,TF,OF.LP2
MOVE S2,TF
MOVEI S1,%RSUOK ;LOAD THE CODE
$RETT ;RETURN
INIT.1: MOVNI S1,1 ;-1 MEANS DEVICE NOT FOR US
$RETF ;RETURN
INIT.2: SKIPA S1,[%RSUNA] ;UNIT NOT AVAILABLE
INIT.3: MOVEI S1,%RSUDE ;UNIT WILL NEVER BE AVAILABLE
$RETF ;RETURN
SUBTTL LP5IPC - Special IPCF message processing
LP5IPC: MOVNI S1,1 ;WE HAVE NO SPECIAL MESSAGES
$RETF ;RETURN
SUBTTL LP5SCD - Scheduler call
LP5SCD: $RETT ;RETURN
SUBTTL LP5WAK - Wakeup time check
LP5WAK: $RETT ;RETURN
SUBTTL LP5OPX - OPEN device
LP5OPX: MOVX T1,IO.SFF+.IOASC ;ASCII MODE + SUPPRESS FORM FEED
PUSHJ P,LPTOPN## ;SETUP I/O, OPEN CHANNEL, ETC.
JUMPF OPEN.1 ;CAN'T HAVE IT RIGHT NOW
PUSHJ P,LPTHDW## ;SETUP HARDWARE CHARACTERISTICS
SKIPN LP5LP2(J) ;IF NOT SIMULATING LP20,
JRST OPEN.0 ;DON'T TRY TO SET UP SIMULATOR
PUSHJ P,VFUOPX## ;SET UP SIMULATOR (USES/SETS HW CHARS)
MOVE S1,J$DCHR(J) ;GET DEVCHR FOR DEVICE
SKIPGE J$LREM(J) ;AN ANF (REMOTE) DEVICE?
TXNN S1,DV.LPT ;YES, IS IT A REAL LPT?
JRST OPEN.0 ;NO, DON'T CONFUSE MATTERS
MOVE S1,J$LCHN(J) ;ANF AND REAL, FETCH CHANNEL #
LSH S1,^D23 ;POSITION CHANNEL NUMBER
TDO S1,[SETSTS IO.SFF!IO.SVF!.IOASC] ;TELL ANF NODE NOT TO SIMULATE
XCT S1 ;VFU. WE KNOW WHAT WE WANT.
OPEN.0: PUSHJ P,INTCNL## ;CONNECT TO INTERRUPT SYSTEM
JUMPF OPEN.2 ;GIVE UP
TXO S,INTRPT ;INDICATE WE'RE CONNECTED
MOVEI S1,%RSUOK ;LOAD THE CODE
$RETT ;RETURN
OPEN.1: SKIPA S1,[%RSUNA] ;UNIT NOT AVAILABLE
OPEN.2: MOVEI S1,%RSUDE ;UNIT WILL NEVER BE AVAILABLE
$RETF ;RETURN
SUBTTL LP5CLS - CLOSE device
LP5CLS: TXZE S,INTRPT ;ARE WE CONNECTED TO INTRPT SYSTEM?
PUSHJ P,INTDCL## ;YES,,RELEASE THE INTERRUPTS
MOVE S1,J$LCHN(J) ;GET THE CHANNEL
SKIPE J$LREM(J) ;ARE WE USING A REMOTE PRINTER?
JRST CLOS.1 ;YES--ISSUE A CLOSE/RELEASE
RESDV. S1, ;RESET THE CHANNEL
JFCL ;IGNORE ANY ERRORS
$RETT ;AND RETURN
CLOS.1: LSH S1,^D23 ;POSITION THE CHANNEL NUMBER
TLO S1,(CLOSE 0,0) ;MAKE IT A CLOSE UUO
XCT S1 ;CLOSE THE MAG TAPE
MOVE S1,J$LCHN(J) ;GET THE CHANNEL NUMBER AGAIN
LSH S1,^D23 ;POSITION IT
TLO S1,(RELEASE 0,0) ;MAKE IT A RELEASE UUO
XCT S1 ;RELEASE THE DEVICE
$RETT ;AND RETURN
SUBTTL LP5FLS - Flush a job
LP5FLS: PJRST LPTFLS## ;CALL COMMON FLUSH ROUTINE
SUBTTL LP5FVU - Load VFU
LP5VFU: SKIPE LP5LP2(J) ;SIMULATING LP20?
JRST VFUVFU## ;YES, LET SIMULATOR HANDLE IT
JRST @[IFIW CHKVFU ;(0) CHECK VFU STATUS
IFIW LODVFU ;(1) LOAD VFU
IFIW VFUERR](S1) ;(2) OUTPUT ERROR DURING LOAD
CHKVFU: PUSHJ P,.SAVET ;SAVE SOME ACS
MOVE T1,[2,,T2] ;GET THE DEVOP. PARAMETERS
MOVX T2,.DFRDS ;READ EXTENDED STATUS
MOVE T3,J$LDEV(J) ;SIXBIT /DEVICE/
DEVOP. T1, ;ASK THE MONITOR
SETZ T1, ;SHOULDN'T HAPPEN
TXNE T1,DF.LVE ;VFU PROBLEM?
$RETF ;YES, COMPLAIN
$RETT ;NO, SAY SO
LODVFU: LOAD S1,J$LCLS(J) ;GET THE PRINTER CONTROLLER CLASS
CAXN S1,.DFS20 ;FRONT END LPT ???
JRST VFU.7 ;YES,,DO THINGS A LITTLE DIFFERENTLY
MOVE S1,J$FTAP(J) ;GET FILENAME
STORE S1,VFUFD+.FDNAM ;AND STORE IN THE FD
MOVEI S1,FOB.SZ ;GET THE FOB SIZE
MOVEI S2,FOB## ;AND FOB ADDRESS
PUSHJ P,.ZCHNK ;AND ZERO IT
MOVEI S1,VFUFD ;GET FD ADDRESS
STORE S1,FOB##+FOB.FD ;STORE
MOVEI S1,7 ;GET 7 BIT BYTE SIZE
STORE S1,FOB##+FOB.CW,FB.BSZ ;AND STORE
MOVEI S1,FOB.SZ ;GET FOB SIZE
MOVEI S2,FOB## ;AND FOB ADDRESS
PUSHJ P,F%IOPN ;SETUP TO READ IT
JUMPF HDWVFU ;FILE NOT FOUND, TRY HARDWARE VFU
MOVEM S1,J$FVIF(J) ;ELSE,,SAVE THE IFN
MOVE T1,[2,,T2] ;ARGS FOR DEVOP
MOVX T2,.DFENV ;ENABLE VFU LOAD
MOVE T3,J$LDEV(J) ;FOR I/O DEVICE
DEVOP. T1, ;DO IT
JRST NODAVF ;ASSUME NO DAVFU
VFU.4: SOSGE J$FBYT(J) ;CHECK AND SEE IF DATA IS IN BUFFER.
JRST VFU.6 ;IF NOT,,GET NEXT BUFFER.
ILDB C,J$FPTR(J) ;PICK UP A BYTE.
PUSHJ P,DEVOUT## ;WRITE IT OUT.
JRST VFU.4 ;GO GET ANOTHER.
VFU.5: PUSHJ P,OUTDMP## ;FORCE OUT THE BUFFERS
PUSHJ P,DISVFU ;DISABLE VFU LOADING
$RETT ;OK,,JUST RETURN
VFU.6: MOVE S1,J$FVIF(J) ;GET VFU IFN.
PUSHJ P,F%IBUF ;GET ANOTHER BUFFER.
JUMPF VFU.5 ;IF NO MORE,,RETURN
MOVEM S1,J$FBYT(J) ;SAVE THE BYTE COUNT
MOVEM S2,J$FPTR(J) ;SAVE THE BYTE POINTER.
JRST VFU.4 ;CONTINUE PROCESSING.
VFUFD: $BUILD FDMSIZ
$SET(.FDLEN,FD.LEN,VFUFDL) ;FD LENGTH
$SET(.FDEXT,,<SIXBIT/VFU/>) ;FILENAME EXTENSION
$SET(.FDSTR,,<SIXBIT/SYS/>) ;FILE STRUCTURE
$EOB
VFUFDL==.-VFUFD ;FD LENGTH
;HERE IF VFU FILE IS NOT AROUND, TRY TO RECOVER BY LOADING THE
;HARDWARE VFU
HDWVFU: MOVE T1,J$FTAP(J) ;TYPE WE TRIED TO LOAD
CAME T1,D$TAPE## ;IS IT THE DEFAULT
JRST VFUFAI ;VFU LOAD FAILED
MOVE T1,[2,,T2] ;ARGS FOR DEVOP
MOVEI T2,.DFLLV ;LOAD HARDWARE VFU
MOVE T3,J$LCHN(J) ;FOR CHANNEL
DEVOP. T1, ;DO IT
VFUFAI: SKIPA S1,[1] ;VFU LOAD FAILED
VFUHVL: SETZ S1, ;HARDWARE VFU LOADED INSTEAD
$RETF
VFUERR: LOAD S1,J$LCLS(J) ;[2775] GET CONTROLLER CLASS
CAXE S1,.DFS20 ;[2775] FRONT END LPT?
PUSHJ P,DISVFU ;[2775] NO,,GO DIASBLE VFU LOADING
$RET
DISVFU: MOVE T1,[2,,T2] ;LOAD ARG POINTER
MOVX T2,.DFDVL ;DISABLE VFU LOAD
MOVE T3,J$LCHN(J) ;AND CHANNEL NUMBER
DEVOP. T1, ;DO IT!
JRST NODAVF ;LOSE
MOVE S1,J$FVIF(J) ;GET THE IFN
PUSHJ P,F%REL ;RELEASE IT
MOVE T1,J$FTAP(J) ;GET TAPE NAME
MOVEM T1,J$FLVT(J) ;SAVE AS TYPE LOADED
POPJ P, ;RETURN
;HERE WHEN DEVOP FAILS...GUESS THERE'S NO VFU AFTER ALL
NODAVF: MOVE S1,J$FVIF(J) ;GET IFN
$CALL F%REL ;RELEASE THE FILE
MOVEI S1,2 ;NO VFU AFTER ALL
$RETF
;FOR FRONT END LINE PRINTERS, WE MUST DO THINGS A LITTLE DIFFERENTLY !!
VFU.7: OPEN 17,VFUFOB ;OPEN THE STRUCTURE
JRST HDWVFU ;CANT,,TRY SOMETHING ELSE
MOVE S1,J$FTAP(J) ;GET THE VFU WE WANT
MOVEM S1,VLKUP+0 ;SAVE IN THE LOOKUP BLOCK
MOVSI S1,'VFU' ;GET THE EXTENSION
MOVEM S1,VLKUP+1 ;SAVE IN THE LOOKUP BLOCK
SETZM VLKUP+2 ;CLEAR 3'RD WORD OF LOOKUP BLOCK
SETZM VLKUP+3 ;CLEAR 4'TH WORD OF LOOKUP BLOCK
SETO T1, ;FALG TO VFU.9 SAYING LOAD FAILED
LOOKUP 17,VLKUP ;FIND THE FILE WE WANT
JRST VFU.9 ;NOT THERE,,TRY SOMETHING ELSE
PUSHJ P,M%GPAG ;GET A PAGE FOR A BUFFER
MOVE T4,S1 ;SAVE THE ADDRESS FOR LATER
MOVEI T1,-1(S1) ;GET BUFFER ADDRESS-1
HLL T1,VLKUP+3 ;GET -FILE LENGTH,,BUFFER ADDR-1
SETZM T2 ;END CCW
IN 17,T1 ;READ THE VFU FILE
SKIPA ;CONTINUE ON SUCCESSFUL RETURN
JRST VFU.8 ;AN ERROR,,TRY SOMETHING ELSE
HLRO T3,VLKUP+3 ;GET -FILE LENGTH
MOVMS T3 ;WANT POSITIVE LENGTH
IMULI T3,5 ;CALC NUMBER OF VFU BYTES
MOVEI T1,.DFLV2 ;WANT LOAD VFU FUNCTION
MOVE T2,J$LCHN(J) ;WANT LPT CHANNEL NUMBER
MOVE S1,[4,,T1] ;GET ARG COUNT,,BLOCK ADDRESS
SETZM S2 ;FLAG S2 (IF 0 THEN VFU LOADED OK)
DEVOP. S1, ;LOAD THE VFU
VFU.8: SETOM S2 ;FLAG THAT VFU LOAD FAILED
MOVE T1,S2 ;SAVE THE VFU LOAD FLAG
MOVE S1,T4 ;GET THE BUFFER ADDRESS BACK
PUSHJ P,M%RPAG ;RELEASE THE PAGE
VFU.9: MOVEI S1,17 ;GET THE CHANNEL NUMBER
RESDV. S1, ;WIPE IT OUT
JFCL ;IGNORE ANY ERROR RELEASING THE DEVICE
JUMPN T1,HDWVFU ;LOAD FAILED,,TRY SOMETHING ELSE
$RETT ;OK,,RETURN
VFUFOB: .IODMP ;DUMP MODE I/O
SIXBIT/SYS/ ;FILE ON SYS:
0,,0 ;DUMP MODE (NO BUFFERS)
VLKUP: BLOCK 4 ;LOOKUP BLOCK
SUBTTL LP5RAM - Load RAM
LP5RAM: SKIPE LP5LP2(J) ;SIMULATING LP20?
JRST VFURAM## ;YES, LET THE SIMULATOR DO IT
OPEN 17,RAMFOB ;OPEN THE STRUCTURE
JRST NORAM ;CANT,,TRY SOMETHING ELSE
MOVE S1,J$FRAM(J) ;GET THE RAM WE WANT
MOVEM S1,RLKUP+0 ;SAVE IN THE LOOKUP BLOCK
MOVSI S1,'RAM' ;GET THE EXTENSION
MOVEM S1,RLKUP+1 ;SAVE IN THE LOOKUP BLOCK
SETZM RLKUP+2 ;CLEAR 3'RD WORD OF LOOKUP BLOCK
SETZM RLKUP+3 ;CLEAR 4'TH WORD OF LOOKUP BLOCK
SETO T1, ;FLAG FOR RAM.2 SAYING "FAILED"
LOOKUP 17,RLKUP ;FIND THE FILE WE WANT
JRST RAM.2 ;NOT THERE,,TRY SOMETHING ELSE
PUSHJ P,M%GPAG ;GET A PAGE FOR A BUFFER
MOVE T4,S1 ;SAVE THE ADDRESS FOR LATER
MOVEI T1,-1(S1) ;GET BUFFER ADDRESS-1
HLL T1,RLKUP+3 ;GET -FILE LENGTH,,BUFFER ADDR-1
SETZM T2 ;END CCW
IN 17,T1 ;READ THE RAM FILE
SKIPA ;CONTINUE ON SUCCESSFUL RETURN
JRST RAM.1 ;AN ERROR,,TRY SOMETHING ELSE
HLRO T3,RLKUP+3 ;GET -FILE LENGTH
MOVMS T3 ;WANT POSITIVE LENGTH
LSH T3,2 ;CONVERT TO 8 BIT BYTE COUNT
MOVEI T1,.DFLR2 ;WANT LOAD RAM FUNCTION
MOVE T2,J$LCHN(J) ;WANT LPT CHANNEL NUMBER
MOVE S1,[4,,T1] ;GET ARG COUNT,,BLOCK ADDRESS
SETZM S2 ;FLAG S2 (IF 0 THEN RAM LOADED OK)
DEVOP. S1, ;LOAD THE RAM
RAM.1: SETOM S2 ;INDICATE RAM LOAD ERROR
MOVE T1,S2 ;SAVE THE RAM LOAD FLAG
MOVE S1,T4 ;GET THE BUFFER ADDRESS BACK
PUSHJ P,M%RPAG ;RELEASE THE PAGE
RAM.2: MOVEI S1,17 ;GET OUR CHANNEL NUMBER
RESDV. S1, ;WIPE IT OUT
JFCL ;IGNORE ANY ERROR RELEASING THE DEVICE
JUMPN T1,NORAM ;IF AN ERROR,,GO TRY SOMETHING ELSE
$RETT ;AND RETURN
NORAM: MOVEI S1,1 ;RAM LOAD FAILED, OPR ACTION
$RETF
RAMFOB: .IODMP ;DUMP MODE I/O
SIXBIT/SYS/ ;FILE ON SYS:
0,,0 ;DUMP MODE (NO BUFFERS)
RLKUP: BLOCK 4 ;LOOKUP BLOCK
SUBTTL LP5LER - File LOOKUP error processing
LP5LER: PJRST LPTLER## ;CALL COMMON ERROR ROUTINE
SUBTTL LP5IER - File input error processing
LP5IER: PJRST LPTIER## ;CALL COMMON ERROR ROUTINE
SUBTTL LP5CHO - OUTPUT A CHARACTER
LP5CHO: SKIPE LP5LP2(J) ;IF LP20-SIMULATION,
PJRST VFUCHO## ;LET SIMULATOR HAVE CHARACTER
$RETT ;OTHERWISE LET DEVOUT DO IT
SUBTTL LP5OUT - Output a buffer
LP5OUT: PJRST LPTOUT## ;CALL COMMON OUTPUT ROUTINE
SUBTTL LP5OER - Output error processing
LP5OER: SKIPE LP5LP2(J) ;IF SIMULATING LP20,
PUSHJ P,VFUOER## ;LET SIMULATOR SIGNAL ERRORS TOO
PJRST LPTOER## ;CALL COMMON ERROR ROUTINE
SUBTTL LP5EOX - Output EOF processing
LP5EOX: $RETT ;NOTHING TO DO
SUBTTL LP5BJB - Begining of job
LP5BJB: $RETT ;RETURN
SUBTTL LP5EJB - End of job
LP5EJB: $RETT ;RETURN
SUBTTL LP5BFL - Begining of file
LP5BFL: $RETT ;RETURN
SUBTTL LP5EFL - End of file
LP5EFL: $RETT ;RETURN
SUBTTL LP5BAN - Banner initialization
LP5BAN: $RETT ;RETURN
SUBTTL LP5HDR - Header initialization
LP5HDR: $RETT ;RETURN
SUBTTL LP5WID - Header width initialization
LP5WID: $RETT ;RETURN
SUBTTL LP5RUL - Ruler processing
LP5RUL: PJRST LPTRUL## ;PRINT STANDARD RULER
SUBTTL LP5SHT - Stream shutdown
LP5SHT: SKIPE LP5LP2(J) ;LP20-SIMULATION?
PJRST VFUSHT## ;YES, LET SIMULATOR SHUT DOWN
$RETT ;RETURN
SUBTTL LP5CHR - Character translator
LP5CHR: $RETT ;RETURN
SUBTTL Literal pool
LP5LIT: LIT
LP5END::!END