Google
 

Trailing-Edge - PDP-10 Archives - BB-JR93N-BB_1990 - 10,7/galaxy/lptspl/lptmac.mac
There are 22 other files named lptmac.mac in the archive. Click here to see a list.
UNIVERSAL LPTMAC - LPTSPL-10 line printer driver definitons

;
;
;		COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION
;     1975,1976,1977,1978,1979,1980,1981,1982,1986,1987,1988,1990.
;			ALL RIGHTS RESERVED.
;
;     THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY  BE  USED
;     AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
;     AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE.   THIS
;     SOFTWARE  OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
;     OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON.  NO  TITLE  TO
;     AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
;     THE INFORMATION  IN  THIS  SOFTWARE  IS  SUBJECT  TO  CHANGE
;     WITHOUT  NOTICE  AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
;     BY DIGITAL EQUIPMENT CORPORATION.
;
;     DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
;     OF  ITS  SOFTWARE  ON  EQUIPMENT  WHICH  IS  NOT SUPPLIED BY
;     DIGITAL.
;

	SEARCH	GALCNF			;GALAXY ASSEMBLY PARAMETERS
	SEARCH	GLXMAC			;SEARCH GALAXY PARAMETERS
	SEARCH	QSRMAC			;SEARCH QUASAR PARAMETERS
	SEARCH	ORNMAC			;SEARCH ORION/OPR PARAMETERS
	PROLOGUE(LPTSPL)

	.DIRECT	FLBLST

IF2,<PRINTX Assembling GALAXY-10 LPTMAC>

	SALL				;SUPPRESS MACRO EXPANSIONS

;VERSION INFORMATION
	LPTVER==105			;MAJOR VERSION NUMBER
	LPTMIN==0			;MINOR VERSION NUMBER
	LPTEDT==4113
	LPTWHO==0			;WHO LAST PATCHED

	%%.LPT==:<BYTE (3)LPTWHO(9)LPTVER(6)LPTMIN(18)LPTEDT>
	SUBTTL	Revision History

COMMENT \

2550	Delete all references to user name and job number.
	Replace them with ^R Library $Text Function.

2551	Add code to support new QUASAR device status message.

2552	Add RJE support

2553	Fix a Restart page count bug by not including the job
	headers and trailers in the final page count.

2554	Replace ERRSTP ITEXT with LPERR ITEXT. Make sure when LPT comes
	online or goes offline, the status is updated. Add a check to
	ACTEND so that if the request had an invalid account string,
	no USAGE entry is made.

2555	Fix a bug in which INPOPN was doing a LOAD S1,EQ.PRV to get
	the users privilge bits. This translated to MOVE S1,400
	and 400 was SPLDIR (which was never 0). Given this, the
	JUMPN S1,INPO.1 always jumped to INPO.1 and avoided the
	access check. The LOAD was changed to LOAD S1,.EQSEQ(J),EQ.PRV.

2556	Changed the IB to conform to the new IB/PIB structure.

2557	Fix a bug in OUTOUT which caused to stack to be out of phase.
	Basic re-write of OUTOUT, elimination of OUTINT, and
	modification of $SOUT.

2560	Change the scheduler loop to use P1 instead of T2.
	Change the scheduler loop so that at MAIN.1 it
	checks to see if the stream status needs to be updated,
	and if so, it sends a status update and checkpoint
	message to QUASAR.

2561	Delete the flag bit HDRTRL and the supporting code.

2562	Add Calls to S%SIXB & S%TBLK for WTOR response parsing.
	Move the call to FILDIS from ENDJOB to QRELEASE.

2563	Fix line count for narrow forms.
	Fix DEVOUT to save S1 across OUTOUT call
	Add code to cut off the header/trailer line at 'J$FWID' Length

2564	Add DN60 Support.

2565	Add 'Ignore Structure Accounting' MSTR JSYS.

2566	Change the $WTOR's for killing OPR requests from $WTOR to $KWTOR.

2567	Add spooling to mag tape support

2570	Fix a page count problem (on restarts).
	Spell cancelled right (canceled)

2571	Spell Canceling correctly
	add 40 (decimal) words to the context PDL

2572	Fix a bug in which it was possible for LPTSPL to set the output
	blocked scheduling bit and then deschedule for a page limit
	exceeded error. When this happened, LPTSPL would wait for
	the output done interrupt, which, of course, would never come.

2573	Clear J$RNPP IN DOJOB Just before checkpointing the next file
	Clear J$RNPP and checkpoint the number of copies in FILE.1

2574	If a job is cancelled while in OPR response wait from LODVFU or
	LODRAM then zero J$FORM to force the next job to go through
	new forms processing.

2575	Add DN60 operator response support (What a Crock !!)

2576	Delete FTRMTE feature test.

2577	At OUTERR move the PUSHJ P,.SAVET & MOVE T4,STREAM to OUTE.1
	under TOPS-10 conditional.

	Change the scheduler so that for both TOPS-10 & TOPS-20 we
	check to see if we processed a message and if so, dont sleep.

	Change OPRCHK so that as long as the output succeeds, we
	continue printing operator messages.

	For TOPS-10 make OUTDMP call OUTOUT BUFNUM+1 times.

	Add Spooling to Tape support for TOPS-10.

2600	Make LPTSPL sleep forever by removing the 60 second timer.

2601	TOPS10 - Detect EOF on spool to magtape.  Ask OPR to mount next reel

2602	Fix a bug in SHUTIN code. Get a new stack pointer if shutting
	down from 'IN STREAM' context.

2603	Fix a bug - reverse the compare in S$VFU which checks for
	optical VFU.

2604	Fix a bug - In OUTGET, if the default RAM and VFU are already set,
	then, dont set them.

2605	Fix a bug - if printing either the banner or header pages, dont
	flush the buffers in KILL or OACCAN.

2606	Add code to send a form feed if the printer VFU is ok and
	we are about to load the VFU.

2607	Delete the TOPS-20 mag tape code that assigns/deassigns the tape drive.
	Also make sure that the mat tape is not already assigned to anyone.

2610	Delete the RAM variable from the forms default macro and add
	J$FRAM.

2611	Change IPCF send/recieve quotas from max to 20.

2612	Change DN60 D60OPN parameters for new port/line handle.

2613	Fix a bug - prevent LPTSPL from deleting DN60'S link'd list.

2614	Delete the Send/Recieve Quotas from the PIB.

2615	Make OUTREL do a CLOSE instead of a RESDV. if we are spooling to tape

2616	Pick up non-existant printer status bits on the -20.

2617	Fix a bug in TAPGET; The correct value returned by the DVCHR for
	unassigned devices is -1,,unit # - Not -1.

2620	In SHUTDN, After the call to FNDOBJ check to see that the object
	was actually found, and if not, just return.
	In OPDINI, add a SETZM FMOPN and a $RETT at the end of the routine.
	In OPEN.6 add a SETOM J$LINK(J) to indicate that there is no DN60
	operator message list.
	In CLOSE.6, change the MOVE S1,J$LINK(J) to a SKIPL S1,J$LINK(J) so
	that we dont delete a list which may not exist.

2621	TOPS-10: Delete the call to F%FCHN and use the stream number as the
	channel number.

2622	Fix a job restart problem which allows -pages to be printed.

2623	Fix a -10 problem caused by converting to extended channels in the
	library. Must re-write the load VFU and RAM sections for front
	end lint printers

2624	Fix a -10 problem - Clear the PSF%DO and PSF%OB bits in the
	OUTGET routine since we may wait forever after resetting the channel.
	Change all occurances of DC3 output to CRLF except for the ruler.

2625	Add a CRLF to the end of the header page file info line.

2626	Fix a bug in the /REPORT: code for COBOL report files.

2627	Fix a bug in deleting files. Make F%DEL use an in your behalf FOB.

2630	Delete the support for the old forms parameters.

2631	Convert DN60 support to new SETUP message format.

2632	Rework the Backspace /pages support to fix U.S. Railways QAR.

2633	Finally get the backspace code right.

2634	Add 8 bit input support. Also, make output byte sizes variable by
	adding J$LBTZ to keep track of output byte size.

2635	Add /FILE:ELEVEN support to print MACY11 files as standard ascii
	Requires that a new FP bit or field be defined for 8-BIT

2636	TOPS20 QAR (20-00608) Add code to OUTREL so that when closing
	a device other then the line printer, we write out
	trailing tape marks.

2637	Fix a bug in which the ABORT bit was being lit in the NXTJOB code,
	before the forms were set up. This caused the request to be trashed
	without the headers or trailers being printed

2640	Fix a bug - Make the TAPGET OPENF open the device in 7 bit Mode.

2641	Fix Another bug - make OUTGET open device for 8 bit bytes.

2642	Make PICTURE put out line feeds, not DC3's.

2643	Fix a bug in OUTERR code so that is the OUTFLS call fails, then
	send a Response-to-Setup message to QUASAR before shutting down.

2644	Add support for /RAM: in LPFORM.INI for -10 & -20.

2645	Fix an accounting problem in which usage accounting was being done
	twice.

2646	Fix QAR # 20-00805 such that multiple ALIGN commands do not
	add to the sleep time of previous ALIGN commands

2647	Add a SETZM T1 to the .MONOP MTOPR call in OUTDMP.
	Add a .MONOP MTOPR call to TAPGET to wait for I/O to finish or
	if a TTY, set the TTY page width to infinite.

2650	Delete OBDLLC & OBDLUC attribute bits and return %LOWER & %UPPER for
	the new device attributes

2651	Add accounting support for TOPS10 (USAGE)

2652	If NPRINT = 1 then accumulate cpu time used to process a request.

2653	Move search for DN60 universal to FTDN60 conditional

2654	Add code to interrupt routine to check for all error bits on and if
	so, and this is a remote LPT, then don't change restart address. If
	all error bits are on for a local LPT, then the CPU went down, so
	just ignore the problem and wait for it to come back.

2655	Delete the DSKOPN status bit and just check J$DIFN for non-zero.

2656	Add DN60 Support

2657	Force the align that is part of a forms type to occur immediately
	after the form is set.  QAR # 10-04593

2660	Add support for new style /DISPOSE:RENAME

2661	Remove SETNAM that turned off JACCT since it also turns off x-only.
	No LPTSPL needs to have JACCT so correct solution is to eventually
	remove all GALAXY components from PRVTAB.

2662	Use new feature IB.DET to detach from FRCLIN.

2663	Fix CHKTIM to set SLEEPT if zero (not set)
	Delete IB.DET (GLXLIB always detaches)

2664	Remove the system text portion of the account record.  The system
	text portion is to contain any disposition explanation.

2665	Fix a bug in INPOPN and FILDIS so that spooled files are handled
	correctly

2666	QAR # 10-04856  Change all definitions of Z to ZZ to prevent
	MACRO from getting confused during processing of $SAVE

2667	Fix OUTFLS to only reset the line buffers for a DN60 error.

2670	Do call to SHUTND instead of jrsting to SHUTDN since there is
	no need to do the FNDOBJ and that may fail if the message is
	already released.

2671	Add a check in OPRCHK to make sure that a job is not being
	printed before we output the OPR messages for the DN60.

2672	Fix bit settings in CHTAB.  We are currently displacing into
	DOFRAC routine.

2673	Fix formfeed at trailer routine (SPR 20-14654)
	Clear old report code in SETLST so other files work (SPR 20-14635)
	Add indirect (@) to J$DFDA use in $TEXT (SPR 20-14817)
	Fix backspace code (SPR 20-15172)

2674	Clear J$WTOR(J) when it is used to overlaid messages.

2675	Remove decision to do accounting as a runtime decision and make it
	an assembly parameter based on the new feature test FTACNT.

2676	Add check to CHKPNT verifying that the stream is active.

2677	Work with checkpoint mechanism:
		Break checkpoint into two parts, status, and job checkpoint
		Create new status mechanism contained in DSTATUS
		Cause checkpoints to occur internally without QUASAR requests
	Add table of nonsense.
	Reopen LPFORM.INI with every forms change to allow LPFORM.INI changes

2700	Do not do accounting if debugging

2701	Fix setting JOBUPD flag in the interrupt code

2702	Misc. changes:
		Be more clever on checking limits when printing files less than
			one page
		Clear trailer log
		Remove DSTATUS call in dojo.4 since it happens anyway at next
			file or is implied with release message

2703	Fix stupid error where ^D100 was used to define a PDL size.
	(Stupid since PDSIZE is defined in the symbols and is defined to be
	100 octal

2704	Add FACT file accounting support.

2705	Add immediate forms change support which includes routines FORFOR
	and DOFFOR.
	Allow listings queued for a remote LPT be spooled to a special device

2706	Fix context change so the PDL pointer is not clobbered.
	Remove require for d60jsy and include it in lptspl.cmd so symbols
	can be included
	Do not set IO.SFF in open if not a real line printer

2707	3/13/81  Force UPDATE routine to check for DN60 offline.
	Request status update message in D60ER routine.
	Increase size of PDL to 120 octal (PDSIZE)

2710	3/19/81  Do NOT try to $CALL P,NNN.
	Add an argument block to be used for D60OPN per stream since
	MSGBLK (which was used formerly) got clobbered during DSCHD

2711	3/24/81 Make LPFORM.INI /NOTE be an asciz string

2712	3/26/81  Split DN60 errors so there is a different wait time for
	NBR errors and DOL errors.

2713	3/27/81 Use symbol FTFACT from GALGEN dialogue and remove references
	to FTOACT.

2714	4/14/81  Fix DOFFOR to call CHKALN.

2715	4/16/81  Remove last reference to UPDTST replacing with call to DSTATUS.

2716	5/1/81  Clear up any pending WTORs as part of the shutdown code.
	Remove some jrst .+n's.
	Make J$RNPP always our current location in pages with respect to
	the file being printed.  Adjust it as we pass pages, not as part
	of the forward space code.
	Remove BUFSPC since it is not really used.
	Fix bad test by changing TXNN to TXNE in CHKSP to clear J$XTOP
	only when needed.
	If suppressing when doing headers and trailers, don't believe J$XTOP.
	If already processing VFU, do not allow additional VFU errors @OUTE.4.

2717	5/15/81  Delete files in FILDIS only if they are spooled or if
	they are /delete and have not been aborted.

2720	5/15/81 Add 1 word to LPCNF and reorder ACTLST to make accounting work
	on TOPS20.

2721	5/21/81  Do the check for suppress before clearing J$XTOP and hope
	that multiple form feeds will be always suppressed.

2722	6/1/81  Use page length in calculating block size to use on header page.
	Allow CKPTIM to be defined in GALGEN by using ND macro for definition.
	Remove label FRMI4B since it is not referenced.
	Remove the unneeded restriction of checking for LPT when checking actual
	device names in parsing LPFORM.INI.
	Send a warning if the forms requested is unknown which includes
	having FRMINI return false if none found.
	Set FCONV in bspace to indicate a backspace starts a new line.
	Also in BSPACE check to see if the table is wrapped around.
	Make GENDEV work for both T10 and T20.  Have it set J$LDEV.
	Call GENDEV from the routine OUTGET on the 20.

2723	6/9/81  Change GENDEV to always set J$LDEV even if it is a magtape.
	Add a new status bit to indicate that we are processing a job.  The
	purpose of this is to determine whether there is a need for a
	checkpoint.  If forms are being mounted, for example, no checkpoint.
	If the job is requeued before the operator responds to a forms
	change, restore forms to their previous type.

2724	6/12/81  Add LPTBAN, LPTTRL, and LPTHDR to try to use the GALGEN params.
	For T10 only, change the countdown code at CNTDW1+7 to cause
	a DSCHD if: we are forwardspacing and the number of pages is
	evenly divisible by FRWSKP (which allows a DSCHD every FRWSKP pages.

2725	6/22/81  Remote printers should only have one buffer since the network
	only uses one buffer at a time (there is no great advantage) and since
	having only one buffer allows OUTFLS to be skipped for remotes.(that
	caused lots of problems)

2726	6/23/81  Update job limit when backspacing.
	Change size of fact accounting table to a symbol.
	Only check for device assignment if it is a magtape in TAPGET.
	Open LPFORM.INI with sequence numbers suppressed.
	Fix edit 2711 by using AC TF in S$NOT2.
	Make the header information a little more clever for narrow headers.

2727	Use byte I/O instead of buffered I/O for input from LPFORM.INI so
	sequence numbers are suppressed correctly.

2730	7/7/81  Zero out IMESS @CHKQ.5 after releasing the message to
	prevent releasing it twice.

2731	9/10/81  Clear top of form if SUPFIL is set before clearing SUPFIL
	@FILE.2.

2732	9/24/81  In FRMINI return false if the OPNFRM fails.

2733	9/29/81  Add IBM status message support (IBMSTS).
	Remove the zeroing out of J$GNLN in NXTJOB since ZTABLE loop does it.
	If IBMCOM abort, then requeue the job and shutdown the stream.

2734	Made sure suppress mode also implies arrow mode as stated in the
	manuals.

2735	Fixed problem with BACKSPACE when printer goes off line, and
	more than likely, even when it doesn't.

2736	Fixed problem with trailers not being cleared from previous jobs.

2737	11/25/81  Use a generalized routine EOF.6 for EOF on DN60.

2740	12/7/81  Lots of changes...
	1.  Make it so we don't run out of NBR errors unless we
	are trying to shut things down.
	2.  Save last DN60 error in J$D6ER.
	3.  Generalize the CHKTIM routine.  Make it the only one that
	sets SLEEPT.  Have it also check J$CWKT if DN60 opr mess. pending.
	If we clear the sleeptime, clear also variable that started it all.
	4.  DIE immediately if any bad errors in DN60.
	5.  Use polling estimate from D60JSY (POLEST) for sleeptime.
	6.  On TOPS20 have D60ER sleep instead of DSCHD since that version
	is set up more for blocking types of output.
	7.  Make SLEEPT -1 if none set, 0 if no sleep should occur, number
	of seconds to sleep otherwise.

2741	12/16/81  If we are in hasp, do not set operator output wait bit since
	that blocks the print stream which shouldn't happen in HASP.

2742	TJW Fix the continue command to clear the device offline bit.

2743	1/4/82 Clarify all $WTORs to allow ABORT or PROCEED only
		Dont do extra RUNTIM UUOs if NPRINT .GT. 1
		as we zero the runtime in the account entry anyway

2744	1/7/82  Restore T1 that is clobbered by IDIVI in CHKTIM before using
	again.

2745	2/26/82  Set sleep time to 0 if we are allowing sleeptime during
	forwardspacing.
	Never again will LPTSPL run out of DOL errors since I have removed
	the counters.

2746	3/26/82  Fix CPU failure interrupts and add hung device support.

2747	4/6/82  Mount and dismount structures for files we processes. GCO 1302

2750	5/18/82  Do not RESDV remote printers when shutting down @OUTREL.
	GCO 4.2.1342

2751	6/1/82 Correct the count of overhead lines at TRAI.4
	GCO 4.2.1351

2752	6/3/82 Make BACKSPACE/FILE work. GCO 1356

2753	6/3/82  Handle false returns from GLXLNK routines in OPRD60.
	GCO 4.2.1358

2754	6/4/82 Correct definition of BUFCHR.  GCO 1365

2755	6/4/82 Prevent line printer abuse by having differnt STARS text for
	each width class.  GCO 1366

2756	6/9/82 Check for write ring when spooling output to tape.
	If the ring is missing, ask operator to insert it. PCO 20-LPTSPL-48

2757	6/9/82 Add routine to check for eot when spooling to tape.
	Add routine to unload tape and request next mount. PCO 20-LPTSPL-49

2760	6/15/82 More of edit 2755.  GCO 1387

2761	6/15/82 Fix up 2756/2757 to use new subroutines to write tape marks
	and to unload tapes. GCO 1389

2762	6/25/82 Don't update stream status bits on .OMRSP messages.  GCO 1398

2763	6/28-82 Check for ABORT while off-line. GCO 1460 PCO 20-LPTSPL-56

2764	7/6/82 Fix a problem with forms changes not notifying the operator.
	GCO 1420

2765	7/7/82 Fix 'System accounting failure' messages if the site does
	not run ACTDAE, but it's own system. GCO: 1422

2766	7/9/82	Fix edit 2764 so that it works right this time.
	If forms type can be found it will just ask the operator to
	mount them and type proceed. If they aren't however, the
	operator will have the choice of aborting the request.

2767	7/9/82 Resolve structure name before doing STRUUOs.  GCO 1430


2770	15-FEB-83 Fix ruler text length problem. The STARSn text strings
	are 130 instead of 132 characters long. SPR 10-33417/CTK

2771	1-Aug-83 Fix alignment code in FRMINI to not do alignment until after
	LPFORM.INI line is processed.  Symptom was an alignment with
	/ALCNT and/or /ALSLP switch values incorrectly set.
	RAW PCO/DPM

2772	24-Oct-83 Before OPENing device for a stream, see if device has been
	assigned or init'd by someone. This someone could be another
	one of our streams.
	SPR 10-33900 /LWS

2773	25-Oct-83 Fix WTO concerning typeout of unrecognized LPFORM.INI switch.
	SPR 10-34039 /LWS

2774	25-Oct-83 Print spooled file name in LOG and header.
	SPR 10-34149 /LWS

2775	27-Oct-83 Recover from OUT UUO errors while loading VFUs a little better.
	SPR 10-34141 /LWS

2776	12/21/83 Fix coding error in hung device interrupt code. Change
	J to S1 at LPIN.3. 
	SPR 10-34397  /LWS

2777	20-Jan-84 Two edits 2771. Make one of them this edit.
	Handle comments properly in LPFORM.INI.
	SPR 10-33584  /LWS

3000	24-Jan-84 Fix IFN stopcode bug introduce in EDIT 2771. IFN occurs
	if ALIGNment is specified in LPFORM.INI and the ".ALP" file
	doesn't exist.
	SPR 10-34461  /LWS

3001	21-Mar-84 Fix problem in CPU Failure interrupt code. Code
	assumed that CPU Failure interrupts would always happen in
	the correct stream context...not so. Requires edit 2776.
	SPR 10-34573 GCO 10013 /LWS

3002	24-Mar-84 Fix confusing typeout in WTOR that tells operator
	to switch reels when spooling to tape.
	SPR 10-34572 GCO 10014 /LWS

3003	Fix coding error at STRE.1, CAMN should be CAME.
	13-Apr-84 GCO 10027 /LWS

3004	When spooling to magtape, LPTSPL substitutes <CR><LF> for
	<CR><DC3>. V2 did not do this. Save DEVCHR bits and treat LPT
	and MTA the same in CR23.
	This edit REQUIRES LPTSPL edit 2772.
	SPR 10-34695 GCO 10039 11-May-84 /LWS

3005	Fix bug in LPINTR where we were incorrectly testing for
	'CPU failure' interrupt condition. Don't use file status
	bits, use PS.RIE!PS.ROE!PS.RDO.
	No SPR GCO 10042 21-May-84 /LWS

3006	Edit 2772 was too cautious. Only check DV.ASP. OPEN will
	fail if device was assigned by another job. Also, some
	people do .ASSIGN commands in SYSJOB.INI for LPTSPL, for
	various reasons.
	No SPR GCO 10045 11-Jun-84 /LWS

3007	When we get an 'online' interrupt for a printer, clear the
	byte count in the buffer header in addition to clearing
	'output blocked'. This will insure that we don't use
	a the buffers again until I/O is done. (We can't guarantee
	that we will never miss an 'output done' interrupt.)
	Change OUTWON to display all printers that are offline.
	SPR 10-34771 GCO 10068 10-AUG-84 /LWS

3010	When the operator says ABORT PRINTER x /PURGE, don't RESDV.
	the printer or try to send a formfeed. /PURGE means get rid
	of the current job now.
	SPR 10-34867 GCO 10096 19-Sep-84 /LWS

3011	Fix problems when using tapes. Add check for write-locked
	status. Don't continue after errors other than IO.IMP or
	IO.EOT.
	SPR 10-34877 GCO 10101 4-Oct-84 /LWS

3012	If VFU error is encountered when outputting to a LP20
	printer (LP26 especially) make LPTSPL load the RAM before
	reloading the VFU. When the printer is powered up, we know
	the VFU is bad, but it nothing indicates the RAM is bad.
	Anyway, the VFU won't load correctly unless the RAM is loaded
	first after power up. Also, check status of VFU before
	each job. This will enable us to load the RAM and VFU if bad
	and not bother the operator with a WTOR. We assume the paper
	has not moved since we didn't do any output since last job
	and thus doesn't require alignment. MCO 11592 should also
	be installed in monitor, but is not required.
	SPR 10-34952 GCO 10114 1-Nov-84 /LWS

3013	Edit 3007 incomplete. We guarded against an offline interrupt
	when not in stream context (rare) but after DEBRKing to OUTWON
	and descheduling, we then continue at J$LIOA(J). But the J (job page)
	we used	to store the continuation address is different than what
	was saved when the interrupt occurred if not in stream context.
	When processing	the offline interrupt, use the job page associated
	with the current stream when storing the continuation address.
	SPR 10-34771A GCO 10115 1-Nov-84 /LWS

3014	Edit 3012 has problems. It prevents a different VFU from being
	loaded on a form change. Sigh.
	GCO 10127 4-Dec-84 /LWS
4000	Begin Version 105.
	Break up LPTSPL into two modules, a universal file and the
	main module. This makes it easy to add extra device drivers
	as needed.
	GCO 10133 6-Jan-85 /NT

4001	Add support for having LPTSPL load special driver modules via
	GALGEN defined modules.
	GCO 10139 22-Jan-85 /NT

4002	Add module LPTL01 to implement LN01 support.
	GCO 10140 22-Jan-85 /NT

4003	Pass abort bit and operator abort text in release message to
	QUASAR to make user job notification a little more useful.
	Put user name in banner from .EQUSR if non-zero.  Put "Dist:"
	in banner if .EQBOX non-zero.
	GCO 10171  21-Mar-85  /DPM

4004	Use RDH words to try and determine file carriage control type.
	GC0 10202 26-Apr-85 /NT

4005	Fix long standing FORWARDSPACING and /BEGIN:nn extra linefeed bugs.
	GCO 10207 13-MAY-85 /CTK

4006	Fix lots of little bugs in LPTL01 development code in an effort to
	stabilize it for field test.
	GCO none  14-MAY-85 /NT

4007	Add DQS support to LPTSPL.  Add a .REQUI to force loading of
	D60JSY if FTDN60 is true.
	GCO 10236  20-Jun-85  /JAD

4010	ZTABLE gets assembled wrong; larger PDL size causes attempt to
	define a 7 character symbol which makes NXTJOB zero random locs
	in the job page.
	GCO 10239  26-Jun-85  /JAD

4011	Make QUEUE FOO/UNIT:LN01 work.
	GCO 10240  1-Jul-85  /DPM

4012	Tell QUASAR the XEROX 8700 is a lower case printer.
	GCO 10244  9-Jul-85  /DPM

4013	Add support for spooling to TTYs (LA120 and LA180).  The
	new driver module is LPTLAX.
	GCO 10250  12-Jul-85  /DPM

4014	Allow LPTSPL to initialize a stream if it is built without any
	special drivers.
	GCO 10257  22-Jul-85  /DPM

4015	Extension missing on 8700 header pages due to wrong AC used in
	LPTDQS at FILI.3.
	GCO 10270  1-Aug-85  /JAD

4016	Update copyright statements. 12-SEP-85 /LEO

4017	Set maximum IPCF send and receive quotas at startup.
	GCO 10301  8-Aug-85  /DPM

4020	Isolate driver specific stuff from LPTSPL.  Reserve 'DRVWDS'
	words in the job data base starting at J$DWDS for the various
	device drivers.  Add lots of driver dispatch table entries.
	Remove FTDQS and propagate all code to LPTDQS.  Likewise,
	remove FTDN60 and propagate all code to LPTD60.  Put LP05
	driver in LPTLP5.  By default, LPTSPL will always force
	loading of LPTD60.REL and LPTLP5.REL modules.

	Although LPTLAX (the terminal driver) is unsupported, it should
	be used as the template for customers wanting to write their own
	printer driver.  LPTLAX.MAC is documents each driver dispatch call,
	how to define driver specifid words in the job data base, and the
	use of the stream status bits reserved for the drivers.
	GCO 10311  25-Aug-85  /DPM

4021	.EQUSR and .EQBOX are now 8-bit ASCIZ quantities.
	GCO 10326  19-Nov-85  /DPM

4022	Add a word in the driver vector containing the address of a routine
	to generate a status text string for CHKPNT.  For all except LPTDQS
	this will be equated to LPTSTS.  LPTDQS will generate a status text
	string of the form "tranferring file n of m".
	GCO 10325  19-Nov-85  /JAD

4023	Fix OUTERR to only test IO.EOT if we're using a magtape.  Don't
	want to call IO.SVF or IO.ABS output errors.
	GCO 10336  5-Dec-85  /RCB

4024	Fix LPTOPN to get the UU.PHS and UU.AIO bits set correctly.
	GCO 10339  6-Dec-85  /RCB

4025	Fix bugs in magtape processing.  Move all magtape code into LPTLP5.
	J$MTAP flag has been superseded by a device driver specific flag
	called LP5MTA and is defined in the reserved-to-driver portion of
	the job data base.  Add dispatch for device dependent error recovery
	(J$OERR).  Change device positioning, form feed, and mountable form
	flags so they may be set by the driver.
	GCO 10341  17-Dec-85  /DPM

4026	If a device doesn't exist, QUASAR is never told.  Returning the
	'response to setup' code in S2 instead of S1 where it belongs.
	GCO 10342  17-Dec-85  /DPM

4027	DN60 printers don't work.  Dispatch never setup.
	GCO 10343  17-Dec-85  /DPM

4030	Improve error reporting for LPFORM.INI I/O errors and globalize
	FH$xxx routines to allow them to be called by the drivers for
	parsing other ASCII files.
	GCO 10346  31-DEC-85  /DPM

4031	Don't request checkpointing from QUASAR if a driver won't do file
	positioning.  Don't set lower case flag if device is an LA180.
	GCO 10351   6-Jan-86  /DPM

4032	LA180s can't handle lower case.
	GCO 10352   7-Jan-86  /DPM

4033	Create a new driver for magtapes (LPTMTA).
	GCO 10353   7-Jan-86  /DPM

4034	Fix bad ACK with open fails and device will never be available
	GCO 10358  13-Jan-86  /DPM

4035	Fix bug in D60OPX where junk response-to-setup code was being
	returned and add missing POP P,T1 in IBMSTS routine.
	GCO 10364  17-Jan-85  /DPM

4036	Delete symbol J$CRTF, it was not needed.
	GCO 10369 21-Jan-86 /NT

4037	LPTSPL	Fix ill mem ref at 000100. remember to restore
		the stack if the device is not available.
		GCO 10372 28-Jan-86 /NT

4040	LPTMAC	Invent a new flag, J$ALNF, that will be used by drivers
	LPTSPL	to specify that they do not do alingments.
		GCO 10374 28-Jan-86 /NT

4041	LPTSPL	Remove extraneous PUSH/POP in LPTOPN.
		GCO 10338 13-Feb-86 /NT

4042	LPTSPL	Make sure device flags J$ALNF, J$MNTF, J$FFDF and
	LPTL01	J$POSF are properly set and tested by all modules.
	LPTDQS	GCO 10381 21-Feb-86 /NT

4043	LPTSPL	Fix hangs waiting for interrupt problem.
		GCO 10382 24-Feb-85 /NT

4044	LPTLP5	If DEVOP. returns unknown printer type, assume
		it is an LP05 class. This keeps people who don't build
		their remote nodes incorrectly printing.
		GCO 10387 7-Mar-86 /NT

4045	LPTSPL	If we get a device offline error, do a RETF from
		LPTOER. LPTOUT will vector to LPTOEX.
		GCO 10399 24-Apr-86 /NT

4046	LPTMTA	Correct comments and description of setting magtape
		parameters now that QUASAR and ORION have all the
		necessary supporting code to do it right.
		GCO 10409 20-May-86 /DPM

4047	LPTMAC	Specify new variable for /FONT font.
	LPTSPL	Call routine to specify header width on multicopy
	LPTL01	printouts.  Don't reload loaded fonts.
		GCO 10411 3-Jun-86 /NT

4050	LPTSPL	Extend edit 4046 to include simulated RAM and VFU files.
	LPTL01	GCO 10414 7-Jun-86 /TL
	LPTMAC
	LPTDQS
	LPTD60
	LPTMTA
	LPTLP5
	LPTLAX

4051	LPTSPL	Make DC1 and DC2 always count down a constant number
		of lines as opposed to a fraction of a page.
		GCO 10425 26-Jun-86 /NT

4052	LPTSPL	Convert $STOP macros to STOPCD macros. Do some version cleanup.
	LPTMAC	GCO 10463 18-Nov-86 /BAH
	LPTDQS

4053	LPTD60	Make DN60-style LPTs get a name of the form LPTnnu like other
		network printers so that LPFORM.INI entries can be made
		that are specific to them.
		GCO 10489 29-Jan-87 /JJF

4054	LPTD60	LPTSPL reprints same portion of file many times on D60
		printers and fails to output portion of last buffer.
		GCO 10492 16-Feb-87 /BAH

4055	LPTL01	Fix LN01 startup code so that if an asynch terminal line
		is defined as 'LN01' all the right things happen.
		GCO 10495 24-Feb-87 /JJF

4056	LPTSPL	For TOPS-10, add .RBVER to file info line on file banner page.
		Also, add .VERSIONs to all modules.
		GCO 10499 12-Mar-87  /TL

4057	LPTSPL	Fix bug in FH$CNV that prevented lower-case characters in
		LPFORM.INI from working.
		GCO 10500 13-Mar-87 /JJF

4060	LPTL01	Fix bug in L01INX which turned off the 'mountable forms'
		flag (J$MNTF(J)), when we really meant to light it.  Allows
		mountable forms to work on LN01s.
		GCO 10501 13-Mar-87 /JJF

4061	LPTMAC	Add code to LPTSPL so it knows what type object processor
	LPTSPL	(%ONCE, %STCMD, %DEMND) it is and do the necessary
		things at the right time.
		GCO 10517 27-Jun-87 /LWS

4062	LPTSPL	Fix bugs in LODVFU and LODRAM where junk being returned in
		S1 on a good return from the driver-specific VFU/RAM loaders
		can cause an ILM on the effective address calculation on
		the JUMPF instructions.  Change the JUMPFs to SKIPT, JRST
		pairs.
		GCO 10518 29-Jun-87 /JJF SPR: 35998

4063	LPTLP5	When LP20 simulation is on, and we are running an ANF LPT,
		suppress VFU simulation in the ANF node to prevent losing
		track of page position. Also, fix PC 0 zero shutting down 
		streams after edit 4061.
		GCO 10521 2-Jul-87 /TL/LWS SPR: CSSC/CS report

4064	LPTSPL	Active stream counter is getting cleared each time we
		check a stream - wrong. Clear it only when we start
		a new AOBJN loop thru the stream database.
		GCO 10526 6-Jul-87 /LWS

4065	LPTL01	Recognize terminal type LN01S as well as LN01.
		GCO 10XXX  8-Jul-87 /DPM

4066	LPTSPL	If debugging, set it so LPTSPL doesn't logout if idle
		or shutdown.
		GCO 10531 13-Jul-87 /LWS

4067	LPTSPL	If we successfully startup a DN60 printer, set BYEUDT
		to zero so LPTSPL doesn't logout when idle.
		GCO 10540 24-Jul-87 /LWS

4070	LPTMAC	Change SOPTYP args to new style.
		GCO 10548  3-Aug-87 /LWS

4071	LPTSPL	Fix problems with LPTSPL's error recovery.
	LPTVFU
		GCO 10566  2-Sep-87 SPR 10-35733  /LWS

4072	LPTSPL	Return LP20 simulation flag in response-to-setup msg.
	LPTLP5	Needs QUASAR edit 1475.
	LPTMTA
	LPTTTY
	LPTLAX
	LPTL01
	LPTD60	GCO 10579  6-Oct-87 /LWS

4073	LPTMAC	Add support for reverse LAT and LN03's.
	LPTSPL	GCO 10599 2-Feb-88 /KDO
	LPTL01
	LPTL03
	LPTTTY

4074	LPTSPL	Fix LAT error recovery.
	LPTL03	GCO 10600 4-Feb-88 /KDO

4075	LPTSPL	Add code to use new DEVOP. function, .DFFRM, to read/set
		forms type of printer.
		GCO 10601 9-Feb-88 /LWS

4076	LPTL03	Send reset sequence at end of job.
		GCO 10602 16-Feb-88 /KDO

4077	LPTMAC	LPTSPL insists on sending a WTOR for /NOTE: in LPFORM.INI
	LPTSPL	even though we used the forms from printer DDB.
		GCO 10605  2-Mar-88 /LWS

4100	LPTL01	Use 8-bit ASCII for LN01's.
		GCO 10607 23-Mar-88 /KDO

4101	LPTL03	Allow the LN03 to do graphics output.
		GCO 10608 23-Mar-88 /KDO

4102	LPTSPL	Don't clear the forms type in the LPT DDB when
		shutting down a stream.  That defeats the whole idea.
		GCO 10630 15-May-88 /RCB

4103	LPTSPL	Make sure we check that VFU is ok when setting up
		forms.
		GCO 10632 18-May-88 /LWS

4104	LPTSPL	Reverse order of loading RAM and VFU at FORM.5. Seems
		that -20F will send a device status update msg after loading
		RAM but not after loading VFU.
		GCO 10655 28-Sep-88 /LWS

4105	LPTL03	Do switching between portrait and landscape work more
		like the LN01 driver.
		GCO 10658 06-Oct-88 /KDO

4106	LPTTTY	Teach LPTSPL to obey the [NO]LP20-SIMULATION flag
		for TTY printers.
		GCO 10664 SPR 10-36175 07-Jan-88 /LWS

4107	LPTTTY	Pay attention to LP20 simulation flag.  Also use new
		wizzy macro definition G$$TTY from GALCNF which allows
		customer definitions of terminal types.
		GCO 10676 24-Aug-89 /DPM

4110	ALL	Remove reference to ".MCRV."; an unimplemented MACRO pseudo-op.
		GCO 10678 16-Oct-89 /DPM

4111	LPTSPL	Add check for SUFINT flag in SETUP/SHUTDOWN msg from QUASAR.
		If lit, don't increment/decrement SSETUP so that we keep
		the stream count correct when LPTSPL is a %STCMD spooler.
		Requires QUASAR edit 1523.
		GCO 10681 SPR 10-36284 30-Nov-89 /LWS

4112	LPTSPL	LPTSPL does not build the proper printer name for local
		printers and local printer check always fails when running
		running under a monitor without ANF support. Requires
		MCO 14267 to TOPS-10 7.04.
		GCO 10684  9-Dec-89 /LWS

4113	LPTSPL	Edit 4112 was deficient. When checking for a local printer,
		check both the local station name and number against
		the node name/number in the SETUP message.
		GCO 10685  13-Jan-90 /LWS

[End of Revision History]
\
	SUBTTL	AC and I/O Channel Definitions

;ACCUMULATOR DEFINITIONS

	M==12		;IPCF MESSAGE ADDRESS
	S==13		;STATUS FLAGS
	E==14		;POINTS TO CURRENT FILE
	J==15		;JOB CONTEXT POINTER
	C==16		;HOLDS A CHARACTER - ALMOST NEVER PRESERVED




	SYSPRM	.MOEOF,16,.MOEOF
	SYSPRM	ERRVFU,DF.LVE,MO%LVF
	SUBTTL	Parameters

;SET LPTSPL'S OBJECT PROCESSOR TYPE
	SOPTYP	(LPTSPL,OPTYP%)

;PARAMETERS WHICH MAY BE CHANGED AT ASSEMBLY TIME
	ND	PDSIZE,^D100	;PDL SIZE
	ND	LPTERR,2	;NUMBER OF LPT I/O ERRS BEFORE QUITTING
	ND	LOGPAG,12	;PAGE LIMIT FOR LOG IF OVER QUOTA
	ND	CKPTIM,^D60	;# of seconds between checkpoints
	ND	LPTBAN,2	;Default number of banner pages
	ND	LPTTRL,2	;Default number of trailer pages
	ND	LPTHDR,2	;Default number of header pages
	ND	FRWSKP,5	;DSCHD every n pages when forwardspacing
	ND	DRVWDS,100	;Default number of words reserved for device
				; drivers in the job data base
	ND	INISIZ,^D132	;INIT FILE ATOM BUFFER SIZE IN CHARACTERS
	   INIWDS==<INISIZ/5>+1	;INIT FILE ATOM BUFFER SIZE IN WORDS
	ND	FTACNT,-1	;Turn on accounting
	DEFINE	FACT,<IFN FTFACT>

;CONSTANT PARAMETERS
	XP	MSBSIZ,30		;SIZE OF A MESSAGE BLOCK
	XP	AFDSIZ,10		;ALIGN FILE FD SIZE.
	XP	DEVLNK,1		;DEVICE DRIVER LINKED LIST NUMBER

;CHECKPOINT BLOCK OFFSETS
	XP	CKFIL,0			;NUMBER OF FILES PRINTED
	XP	CKCOP,1			;NUMBER OF COPIES OF LAST FILE
	XP	CKPAG,2			;NUMBER OF PAGES OF LAST COPY
	XP	CKTPP,3			;TOTAL PAGES PRINTED
	XP	CKFLG,4			;FLAGS
		XP CKFREQ,1B0		;JOB WAS REQUEUED BY OPR
		XP CKFCHK,1B1		;JOB WAS CHECKPOINTED


	SYSPRM	BUFNUM,4,1		;NUMBER OF BUFFERS
	SYSPRM	BUFSIZ,<1000/BUFNUM>,<1000/BUFNUM>
					;SIZE OF EACH BUFFER
	SYSPRM	BUFCHR,<<BUFSIZ-3>*5>,<BUFSIZ*4>
					;NUMBER OF CHARS PER BUFFER
	SYSPRM	NPRINT,17,1		;NUMBER OF DEVICES THIS SPOOLER HANDLES

	SYSPRM	(STRNUM,^D10,NPRINT)	;NUMBER OF STRS MAXIMUM
	STRLEN==2*STRNUM		;LENGTH OF STRUCTURE TABLE
	SYSPRM	(STRSLS,<.FSDSO+<3*STRNUM>+3>,5) ;SIZE OF SEARCH LIST BLOCK

	SYSPRM	RAMNOR,SIXBIT/LP96/,SIXBIT/LP96/
	SYSPRM	SERFLG,0,0		;SYSERR flag -- 0=no entries to be made
	SYSPRM	NBRRT,2,2		;Non-blocking rest time
	SYSPRM	DOLRT,10,10		;Device off-line rest time
	SYSPRM	CONRT,3,3		;Console rest time
	SYSPRM	NENBR,25,25		;# of errors allowed for NBR return
					;  when shutting down
	SUBTTL	MACROS

DEFINE	DEVDSP	(PFX,TXT),<

	XLIST

PFX'DSP:PHASE	J$$DEV		;;THESE OFFSETS SHOULD BE COMMON TO ALL USERS
DV$LNK::!XWD	0,0		;;(RESERVED),,LINKED LIST CHAIN ADDRESS
	.LINK	DEVLNK,<PFX'DSP+<DV$LNK-J$$DEV>> ;;FILL IN CHAIN AT LINK TIME
DV$NAM::!EXP	[ASCIZ"TXT"]	;;DRIVER NAME
DV$INX::!EXP	PFX'INX		;;DEVICE INITIALIZATION
DV$IPC::!EXP	PFX'IPC		;;SPECIAL IPCF MESSAGE PROCESSING
DV$SCD::!EXP	PFX'SCD		;;SCHEDULER CALL
DV$WAK::!EXP	PFX'WAK		;;WAKEUP TIME CHECK
DV$OPX::!EXP	PFX'OPX		;;OPEN DEVICE
DV$CLS::!EXP	PFX'CLS		;;CLOSE DEVICE
DV$FLS::!EXP	PFX'FLS		;;FLUSH JOB
DV$VFU::!EXP	PFX'VFU		;;LOAD VFU
DV$RAM::!EXP	PFX'RAM		;;LOAD RAM
DV$LER::!EXP	PFX'LER		;;FILE LOOKUP ERROR PROCESSING
DV$IER::!EXP	PFX'IER		;;FILE INPUT ERROR PROCESSING
DV$CHO::!EXP	PFX'CHO		;;OUTPUT A CHARACTER
DV$OUT::!EXP	PFX'OUT		;;OUTPUT A BUFFER
DV$OER::!EXP	PFX'OER		;;OUTPUT ERROR PROCESSING
DV$EOX::!EXP	PFX'EOX		;;OUTPUT EOF PROCESSING
DV$ALN::!EXP	0		;;DEVICE DOES NOT DO ALIGNMENTS
DV$DPF::!EXP	0		;;DEVICE POSITIONING FLAG (SET BY DRIVER)
DV$FFD::!EXP	0		;;FORM FEED FLAG (SET BY DRIVER)
DV$D3F::!EXP	0		;;DEVICE SUPPORTS DC3 SPACING
DV$MTF::!EXP	0		;;MOUNTABLE FORMS FLAG (SET BY DRIVER)
DV$BJB::!EXP	PFX'BJB		;;BEGINING OF JOB
DV$EJB::!EXP	PFX'EJB		;;END OF JOB
DV$BFL::!EXP	PFX'BFL		;;BEGINING OF FILE
DV$EFL::!EXP	PFX'EFL		;;END OF FILE
DV$BAN::!EXP	PFX'BAN		;;BANNER INITIALIZATION
DV$HDR::!EXP	PFX'HDR		;;HEADER INITIALIZATION
DV$CHR::!EXP	PFX'CHR		;;CHARACTER TRANSLATION
DV$RUL::!EXP	PFX'RUL		;;RULER PROCESSING
DV$WID::!EXP	PFX'WID		;;HEADER WIDTH INITIALIZATION
DV$SHT::!EXP	PFX'SHT		;;SHUTDOWN HANDLER
DV$STS::!EXP	PFX'STS		;;GENERATE DEVICE STATUS TEXT
J$$DND::!DEPHASE

	LIST
> ;END DEVDSP MACRO


	;SYM IS DEFINED AS GLOBAL TO CATCH SKEWS BETWEEN LPTSPL AND THE DRIVERS
DEFINE LP(SYM,VAL,FLAG),<
	IF1,<
		XLIST
		IFNDEF J...X,<J...X==1000>
		IFDEF SYM,<PRINTX  ?PARAM SYM USED TWICE>
		SYM==:J...X
		J...X==J...X+VAL
		IFNDEF ...BP,<...BP==1B0>
		IFNDEF ...WP,<...WP==0>
		REPEAT VAL,<
		IFIDN <FLAG><Z>,<LPZ(\...WP,...BP)>
			...BP==...BP_<-1>
			IFE ...BP,<
				...BP==1B0
				...WP==...WP+1
			>  ;;END IFE ...BP
		>  ;;END REPEAT VAL
		LIST
		SALL
	>  ;END IF1

	IF2,<
	.XCREF
	J...X==SYM
	.CREF
	SYM==J...X
	>  ;END IF2
>  ;END DEFINE LP


	;MACRO DEFINES ZEROED STORAGE
DEFINE LPZ(A,B),<
	IFNDEF ..Z'A,<..Z'A==B>
	IFDEF ..Z'A,<..Z'A==..Z'A!B>
>  ;END DEFINE LPZ
DEFINE F,<
	FF	BANNER,LPTBAN
	FF	TRAILER,LPTTRL
	FF	HEADER,LPTHDR
	FF	LINES,^D60
	FF	WIDTH,^D132
	FF	ALIGN,0
	FF	ALCNT,5
	FF	ALSLP,7
	FF	RIBBON,FRMNOR
	FF	TAPE,FRMNOR
	FF	VFU,FRMNOR
	FF	DRUM,FRMNOR
	FF	CHAIN,FRMNOR
	FF	NOTE,0
	FF	RAM,-1
DEFINE $DSCHD(FLAGS),<
IF2,<IFNDEF DSCHD,<EXTERN DSCHD>>
	PUSHJ	P,DSCHD
	XLIST
	JUMP	[EXP FLAGS]
	LIST
	SALL
>  ;END DEFINE $DSCHD

DEFINE $D60ER(ADD),<
	PUSHJ	P,D60ER
	XLIST
	JUMP	ADD
	LIST
	SALL
>  ;END DEFINE $D60ER
DEFINE $D60OE(ADD),<
	PUSHJ	P,D60OE
	XLIST
	JUMP	ADD
	LIST
	SALL
>  ;END DEFINE $D60OE
>
	SUBTTL	Flag Definitions

	ARROW==1B0		;ARROW MODE IN EFFECT
	SUPFIL==1B1		;NO USER FORM CONTROL
	FRMSOK==1B2		;FORMS ARE OK
	RQB==1B3		;JOB HAS BEEN REQUED
	SUPJOB==1B4		;SUPPRESS /JOB
	ABORT==1B5		;THE SHIP IS SINKING
	FCONV==1B6		;THE NEXT CHAR IS FORTRAN FORMAT DATA
	NEWLIN==1B7		;FLAG FOR THE BEGINING OF LINE
	SKPFIL==1B8		;SKIP FUTURE COPIES OF THIS FILE COMPLETELY
	GOODBY==1B9		;IN JOB TERMINATION SEQUENCE
	FBPTOV==1B10		;SPACING PAGE TABLE OVERFLOW BIT.
	FORWRD==1B11		;FORWARD SPACING REQUEST IN PROGRESS.
	INTRPT==1B12		;STREAM IS CONNECTED TO THE INTERRUPT SYSTEM
	BCKFIL==1B13		;REQUEST WAS BACKSPACED 1 FILE
	BANHDR==1B14		;PRINTING BANNER/HEADER PAGES
	VFULOD==1B15		;VFU LOAD IS IN PROGRESS
	INJOB==1B16		;In a print job (Checkpoint should be done)
	FRMFND==1B17		;No such forms in LPFORM.INI
	STSDRV==7B35		;BITS RESERVED TO THE DEVICE DRIVERS

;SCHEDULER FLAGS
	PSF%OB==1B1		;OUTPUT BLOCKED
	PSF%DO==1B2		;DEVICE IS OFF-LINE
	PSF%ST==1B3		;STOPPED BY OPERATOR
	PSF%OR==1B4		;OPERATOR RESPONSE WAIT
	PSF%AL==1B5		;ALIGNMENT TIMER WAIT STATE.
	PSF%OO==1B6		;WAITING FOR 2780/3780 OPERATOR OUTPUT
	PSF%MW==1B7		;MOUNT WAIT
	SUBTTL	Macros -- DRVTAB device driver table

;Make these definitions to keep LPTSPL from searching GALCNF.

	DEFINE G..LPT,<G$$LPT>

	DEFINE LL(XX)<
	...LPT==...LPT+1
>
	...LPT==0

	G..LPT

	MAXDEV==...LPT
	SUBTTL	Job Parameter Area

	LP	J$$BEG,0		;BEGINNING OF PARAMETER AREA

;	LP	J$JPAS,1		;Size of this job parameter block

;REQUEST PARAMETERS
	LP	J$RFLN,1		;NUMBER OF FILES IN REQUEST
	LP	J$RLIM,1,Z		;JOB LIMIT IN PAGES
	LP	J$RTIM,1		;START TIME OF JOB
	LP	J$RLFS,1,Z		;ADR OF LOG FILE SPEC
	LP	J$RNFP,1,Z		;NUMBER OF FILES PRINTED
	LP	J$RNCP,1,Z		;NUMBER OF COPIES OF CURRENT FILE
	LP	J$RNPP,1,Z		;NUMBER OF PAGES IN CURRENT COPY PRINTED
	LP	J$RACS,20		;CONTEXT ACS
	LP	J$RPDL,PDSIZE		;CONTEXT PUSHDOWN LIST

;LPT PARAMETERS
	LP	J$LBUF,1		;ADDRESS OF LPT BUFFER
	LP	J$LBFR,PAGSIZ		;LINE PRINTER BUFFER
	LP	J$LBRH,1		;BUFFER RING HEADER
	LP	J$LBPT,1		;BYTE POINTER
	LP	J$LBCT,1		;BYTE COUNT
	LP	J$LDEV,1		;ACTUAL OUTPUT DEVICE NAME
	LP	J$LION,1		;I/O INDEX
	LP	J$LTYP,1		;SIXBIT UNIT TYPE
	LP	J$LOUT,20		;OUTPUT NODE/DEVICE/UNIT TEXT
	LP	J$LERR,1		;LPT ERROR DOWNCOUNTER
	LP	J$LRAM,1		;DEFAULT RAM FILE NAME (LP64 or LP96)
	LP	J$LLCL,1		;-1 IF UPPER/LOWER CASE PRINTER
	LP	J$LDVF,1		;-1 IF DAVFU ON PRINTER
	LP	J$LDRM,1		;-1 IF DEVICE HAS A LOADABLE RAM
	LP	J$LPCR,1		;-1 IF DEVICE HAS A PAGE CNTR
	LP	J$LREM,1		;Device index
					; 0 = LOCAL LPT
					;-1 = REMOTE LPT
	LP	J$LLAT,1		;-1 = LAT SERVER LINE
	LP	J$LCLS,1		;LPT CONTROLLER CLASS
	LP	J$LIOA,1		;-1 IF WE ARE IN A SOUT OR OUT
	LP	J$LLPT,1		;-1 IF DEVICE REALLY IS A LPT
	LP	J$LIOS,1		;LPT IO ERROR STATUS
	LP	J$XIOS,1		;EXTENDED ERROR STATUS
	LP	J$LCHN,1		;LPT I/O CHANNEL
	LP	J$LBTZ,1		;LPT OUTPUT BYTE SIZE
	LP	J$LSTG,2		;DEVICE NAME STRING
	LP	J$LIBC,1		;INITIAL BYTE COUNT
	LP	J$LIBP,1		;INITIAL BYTE POINTER
	LP	J$DCHR,1		;[3004] STREAM'S DEVICE CHARACTERISTICS

	;CONTINUED ON NEXT PAGE
	;CONTINUED FROM PREVIOUS PAGE

;CURRENT FORMS PARAMETERS

DEFINE	FF(X,Y),<
	LP	J$F'X,1
>

	LP	J$FCUR,0		;START OF FORMS PARAMS
	F				;CURRENT FORMS PARAMS

	LP	J$FORM,1		;CURRENT FORMS TYPE
	LP	J$FPFM,1		;PREVIOUS FORMS TYPE
	LP	J$PDRU,1		;PREVIOUS LOADED DRUM
	LP	J$PRIB,1		;PREVIOUS LOADED RIBBON
	LP	J$PTAP,1		;PREVIOUS LOADED CARRAIGE CONTROL TAPE
	LP	J$FMSP,1,Z		;FORMS WTO/WTOR PAGE ADDRESS
	LP	J$FWCL,1		;CURRENT WIDTH CLASS
	LP	J$FLCL,1		;Current length class
	LP	J$FLVT,1		;CURRENTLY 'LOADED' VFU TYPE
	LP	J$FLRM,1		;CURRENTLY 'LOADED' TRANSLATION RAM
	LP	J$FVIF,1		;IFN OF VFU FILE ON -10
	LP	J$FBYT,1,Z		;VFU INPUT BYTE COUNT.
	LP	J$FPTR,1		;VFU INPUT BYTE POINTER.
	LP	J$LVFF,1		;FIRST TIME THROUGH FLAG FOR LPT VFU'S
	LP	J$CVFU,1		;-1 IF CHECKING VFU INSTEAD OF LOAD
	LP	J$FNBK,INIWDS		;OPERATOR NOTE BLOCK

IF2,<	PURGE	J$FVFU,J$FCHA		;DON'T USE THESE   >

;ALIGN FILE PARAMETERS
	LP	J$APRG,1		;-1 IF ALIGN IS IN PROGRESS
	LP	J$AIFN,1		;ALIGN FILE IFN
	LP	J$ABYT,1		;ALIGN BUFFER BYTE COUNT.
	LP	J$APTR,1		;ALIGN BUFFER BYTE POINTER.
	LP	J$ASLP,1,Z		;SECONDS TO SLEEP
	LP	J$ACNT,1,Z		;LOOP COUNT
	LP	J$AFD,AFDSIZ		;THE FD FOR THE ALIGN FILE

;MISCELLANY
	LP	J$XTOP,1		;WE ARE AT TOP OF FORM
	LP	J$XFOB,FOB.SZ		;A FILE OPEN BLOCK
	LP	J$XPOS,1		;CURRENT VERTICAL POSITION
	LP	J$XHBF,<45>		;BUFFER TO BUILD HEADER LINE
	LP	J$XCOD,<^D55>		;COMPILE A ROUTINE TO CHECK
					; FOR MATCH ON /REPORT
	LP	J$XFRC,1		;FORTRAN CHARACTER REPEAT COUNT
	LP	J$XTBF,50		;$TEXT BUFFER FOR OUTPUT DEVICE
	LP	J$XTBP,1		;BYTE POINTER FOR J$XTBF.
	LP	J$RESP,2,Z		;OPERATOR RESPONSE BUFFER.
	LP	J$WTOR,^D50		;WTOR MESSAGE BUFFER.
;ACCOUNTING PARAMETERS.

	LP	J$APRT,1,Z		;PAGE COUNT.
	LP	J$ADRD,1,Z		;DISK BLOCKS READ.
	LP	J$APRI,1,Z		;JOBS PRIORITY
	LP	J$ARTM,1,Z		;JOBS RUN TIME (CPU)
	LP	J$ASEQ,1,Z		;JOBS SEQUENCE NUMBER
	LP	J$AFXC,1,Z		;TOTAL FILES PRINTED (FILES*COPIES)

;FORWARD SPACE / BACK SPACE PARAMETERS

	LP	J$FBPT,1		;CURRENT PAGE TABLE POSITION
	LP	J$FPAG,PAGSIZ		;BACKSPACE PAGE TABLE
	LP	J$FCBC,1,Z		;CURRENT INPUT BUFFER BYTE COUNT
	LP	J$FTBC,1,Z		;TOTAL INPUT BYTE COUNT
	LP	J$FPIG,1,Z		;NUMBER OF PAGES TO IGNORE

;DISK FILE PARAMETERS

	LP	J$DIFN,1		;THE IFN
	LP	J$DFDA,1		;THE FD ADDRESS
	LP	J$DBPT,1		;BUFFER BYTE POINTER
	LP	J$DBCT,1,Z		;BUFFER BYTE COUNT

;LOG FILE PARAMETERS

	LP	J$GBUF,^D10		;ADDRESS OF LOG FILE BUFFERS
	LP	J$GBFR,PAGSIZ		;FIRST LOG FILE BUFFER
	LP	J$GNLN,1,Z		;NUMBER OF LINES WRITTEN IN LOG
	LP	J$GIBC,1,Z		;INTERNAL LOG BYTE COUNT
	LP	J$GIBP,1,Z		;INTERNAL LOG BYTE POINTER
	LP	J$GINP,1,Z		;NUMBER OF INTERNAL LOG PAGES
	LP	J$GSPL,2		;SPOOLED FILENAME THAT'S PUT IN LOG

;PICTURE BLOCKS

	LP	J$PUSR,10		;USER NAME
	LP	J$PNOT,4		;/NOTE
	LP	J$PDST,10		;/DISTRIBUTION:"text"
	LP	J$PFL1,10		;FIRST LINE OF FILE NAME
	LP	J$PFL2,12		;SECOND LINE OF FILE NAME
	LP	J$PFLS,1		;BLOCKSIZE FOR FILENAME
	LP	J$FTYP,1		;Address of special file typer

	LP	J$FASC,1		;No graphics interpretation
	LP	J$DBRK,1		;Address of device character break mask

	LP	J$DWDS,DRVWDS		;Words reserved for device drivers
	LP	J$VRAM,1		;Address of simulated RAM
	LP	J$VVFU,1		;Address of simulated VFU
	LP	J$VFLG,1		;Flags for LP20 simulation
	  VF.DLH==1B0			;;Delim hold is set
	  VF.UDC==1B1			;;Undefined char interrupt pending
	  VF.PCZ==1B2			;;Page counter interrupt pending
	LP	J$VLIN,1		;RH - Current line for VFU simulation
					;LH - Bit 0 page counter enabled
					;  Bits 1-17 page counter
	LP	J$$DEV,0		;Device dispatch table
	LP	J$LINK,1		;Device driver chain link
	LP	J$DRIV,1		;Driver name
	LP	J$INIT,1		;Device initialization
	LP	J$IPCF,1		;Special IPCF message processing
	LP	J$SCHD,1		;Scheduler call
	LP	J$WAKE,1		;Wakeup timer check
	LP	J$OPEN,1		;OPEN device
	LP	J$CLOS,1		;CLOSE device
	LP	J$FLSH,1		;Flush
	LP	J$VFU,1			;Load VFU
	LP	J$RAM,1			;Load RAM
	LP	J$FLER,1		;File LOOKUP error processing
	LP	J$FIER,1		;File input error processing
	LP	J$CHRO,1		;Output a character to virtual device
	LP	J$OUTP,1		;Output a buffer
	LP	J$OUTE,1		;OUTPUT error processing
	LP	J$EOF,1			;EOF processing
	LP	J$ALNF,1		;Printer does not need alignment
	LP	J$POSF,1		;Device position flag
	LP	J$FFDF,1		;Form feed flag
	LP	J$DC3F,1		;Device supports DC3 spacing
	LP	J$MNTF,1		;Mountable forms flag
	LP	J$BJOB,1		;Begining of job
	LP	J$EJOB,1		;End of job
	LP	J$BFIL,1		;Begining of file
	LP	J$EFIL,1		;End of file
	LP	J$BNRI,1		;Banner initialization
	LP	J$HDRI,1		;Header initialization
	LP	J$BKPR,1		;Character processor
	LP	J$RULR,1		;RULER DISPLAYER
	LP	J$HDRW,1		;SET UP WIDTHS FOR HEADERS
	LP	J$SHUT,1		;SHUTDOWN HANDLER
	LP	J$STST,1		;STATUS MESSAGE
	LP	J$$DND,1		;End device initialization vectors

;	LP	J$$END,1		;END OF PARAMETER AREA

;AREA FOR FONT FILE HANDLERS
	LP	J$FONT,1		;Address of font header from /FONT
	LP	J$FNTL,1		;Name of font name linked list
					;** Next two words must be consecutive
	LP	J$FCNT,1		;**Number of characters in font buffer
	LP	J$FBTP,1		;**Font byte pointer
	CHTLTH==^D200			;Lenght of the intercepted sequence
	CHTWDS==CHTLTH/4		;Number of words it takes up
	LP	J$CTMP,CHTWDS		;Address of intercepted escape seq.
	LP	J$NMTP,FNMLTH		;Temporary name variable
	LP	J$NMT2,FNMLTH		;And another for comparisons against
					;Variables for SIXELed name extraction
	LP	J$FNSZ,1		;Size of physical RAM
	LP	J$LDNF,1		;Flag for always load font
	LP	J$NMIF,1		;Name of get byte routine for FNTNAM
	LP	J$OLDL,1		;Name of current list
	LP	J$SVCH,1		;Last character read

	LP	J$BCT8,1		;Count of translated bytes
	LP	J$BYT8,1		;And where they are kept (3 at a time)

	LP	J$$FND,1		;End of font parameter area

	LP	J$$END,1		;END OF PARAMETER AREA
	J$$LEN==J$$END-J$$BEG		;Length of parameter area
	J$$FNL==J$$FND-J$$BEG		;Lenght for font printers
	SUBTTL	End of LPTMAC

	END