Trailing-Edge
-
PDP-10 Archives
-
BB-L014A-BM
-
autopatch/instal.doc
There are 31 other files named instal.doc in the archive. Click here to see a list.
INSTAL.DOC for DECSYSTEM-20
January 5, 1981
Installation Information for Autopatch-10/20 V1.0
-------------------------------------------------
1.0 INTRODUCTION
This document describes the procedures necessary to set up your
DECSYSTEM-20 for patching software with Autopatch-10/20 V1. It
augments the information provided in chapter 2 of the Autopatch
Procedures/Reference Manual. This initialization operation is
required only once. After it has been completed, you will be
able to apply the patches distributed periodically in the
Autopatch Kits.
In order to set up your system for autopatching, you must create
a disk directory referred to as the autopatching directory.
This directory is used to patch and rebuild the software. In
the autopatching directory you must install some of the files
supplied on this patch tape as described in section 2 of this
document.
In addition, you must also prepare a distribution directory for
each product you intend to autopatch. This operation is
described for each of the autopatchable products in sections 3
and 4 of this document.
For the DECSYSTEM-20 the following products are currently
autopatchable:
The release 4 monitor and EXEC for the following systems:
TOPS-20-2020
TOPS-20-2040 / TOPS-20-2050
TOPS-20-2060
TOPS-20-KL-ARPA
TOPS-20-KS-ARPA
Version 2 of the APL products:
APL-20
APLSF-20
Autopatch V1 is supported for applying only those patches
provided by Digital Equipment Corporation as part of an
Autopatch Kit. Furthermore, those patches are supported for
distributed (field-image) software or distributed software that
has been modified only by autopatching.
INSTAL.DOC for DECSYSTEM-20 page 2
January 5, 1981
2.0 INSTALLING AUTOPATCH
If you are not using an autopatching structure named AP20:, we
recommend that you make an entry in the LOGIN.CMD file and the
BATCH.CMD file that DEFINEs AP20: to be the structure you will
be using. If you do this, you will not need to edit the Dumper
Control Files used to set up the product distribution
directories or to retrieve patches. The LOGIN.CMD and BATCH.CMD
files must be on the PS: structure for the account you will be
logging into to SUBMIT these batch control files. We recommend
that you use <AUTOPATCH> as this directory name.
The second save set of the patch tape contains tools and
control files that are used in the autopatching operation. A
list of all the files in this save set is given in section 5 of
this document. Use the DUMPER program to restore from this save
set to the appropriate disk directories those files you need.
The following files should be installed in PS:<SUBSYS> or one of
the directories belonging to SYS:
PEP.EXE
PEPB.EXE
The following file should be installed in PS:<HELP> or one of
the directories belonging to HLP:
PEP.HLP
The following file should be installed in the disk directory you
have set up as the autopatching directory:
PEP201.PDF
In addition, a product-specific patch and build control file
must be installed in the autopatching directory for each product
you intend to autopatch. These files are in the installation
save set of the patch tape.
APL2S2.CTL for APLSF-20
APL2B2.CTL for APL-20
T20204.CTL for TOPS-20-2020
T20404.CTL for TOPS-20-2040 or TOPS-20-2050
T20604.CTL for TOPS-20-2060
T20AL4.CTL for TOPS-20-KL-ARPA
T20AS4.CTL for TOPS-20-KS-ARPA
INSTAL.DOC for DECSYSTEM-20 page 3
January 5, 1981
The installation save set also contains batch control files to
assist you in setting up the product distribution directories.
These "Distribution DUMPER Control" files are intended to run
under batch. They issue a MOUNT request for the product
distribution tape and then run DUMPER to restore the required
files. The files are:
APL2S2.DDC for preparing APLSF-20 distribution area
APL2B2.DDC for preparing APL-20 distribution area
T20204-SML.DDC for preparing TOPS-20-2020
distribution area for SMALL monitor
T20204-MED.DDC for preparing TOPS-20-2020
distribution area for MEDIUM monitor
T20404-SML.DDC for preparing TOPS-20-2040 / 2050
distribution area for SMALL monitor
T20404-SML-128.DDC for preparing TOPS-20-2040 / 2050
distribution area for SMALL monitor (128K)
T20404-MED.DDC for preparing TOPS-20-2040 / 2050
distribution area for MEDIUM monitor
T20404-BIG.DDC for preparing TOPS-20-2040 / 2050
distribution area for BIG monitor
T20404-BCH.DDC for preparing TOPS-20-2040 / 2050
distribution area for BATCH monitor
T20604-BIG.DDC for preparing TOPS-20-2060
distribution area for BIG monitor
T20604-MAX.DDC for preparing TOPS-20-2060
distribution area for MAXIMUM monitor
T20AL4-SML.DDC for preparing TOPS-20-KL-ARPA
distribution area for SMALL monitor
T20AL4-MED.DDC for preparing TOPS-20-KL-ARPA
distribution area for MEDIUM monitor
T20AL4-BIG.DDC for preparing TOPS-20-KL-ARPA
distribution area for BIG monitor
T20AL4-LGE.DDC for preparing TOPS-20-KL-ARPA
distribution area for LARGE monitor
T20AS4-SML.DDC for preparing TOPS-20-KS-ARPA
distribution area for SMALL monitor
T20AS4-MED.DDC for preparing TOPS-20-KS-ARPA
distribution area for MEDIUM monitor
For each product you intend to autopatch, you should install the
associated control files in the autopatching directory. For
example, if you intended to autopatch a 2060 monitor with a
MAXIMUM system configuration, you would install the files
T20604.CTL for TOPS-20-2060
T20604-MAX.DDC for preparing distribution directory
in the autopatching directory. If you also intended to autopatch
APLSF-20, you would also install the files
APL2S2.CTL for APLSF-20
APL2S2.DDC for preparing APLSF-20 distribution directory
in the autopatching directory.
INSTAL.DOC for DECSYSTEM-20 page 4
January 5, 1981
3.0 PREPARING FOR AUTOPATCHING APL
Both APL-20 and APLSF-20 are autopatchable with Autopatch-10/20.
Before preparing these products for autopatching, they should be
installed on your system as described in the installation
documentation supplied on the APL distribution tapes.
To make the product autopatchable, some of the files from the
product distribution tape will have to be installed in the disk
directory that you have set up as the APL distribution directory.
Refer to section 3.1 for APL-20 or section 3.2 for APLSF-20 to
determine which files you need.
INSTAL.DOC for DECSYSTEM-20 page 5
January 5, 1981
3.1 APL-20
The disk directory in which you have installed the executable
files for APL-20 is referred to as the product installation
directory. In most cases this will be PS:<SUBSYS> or one of the
directories belonging to SYS:. This directory must contain
the files:
APL.EXE
GENBAS.EXE
You will need to copy the following files from the APL-20
distribution tape BB-5135E-BM into the disk directory you have
set up as the APL-20 distribution directory.
From save set "REL LIBRARY FOR TOPS-20 APL-BASIC VERSION 2"
APLB22.REL
APLH22.REL
APLB22.LNK
APLH22.LNK
A batch control file to perform this operation has been included
in the installation save set on this patch tape. This file will
issue a mount request for the APL-20 distribution tape and then
restore the appropriate files to the logical name DIS:. In this
batch file, DIS: is defined to be AP20:<AUTOPATCH.APL>. If you
wish to use this control file, but are not using an AP20:
structure, you will want to include a 'DEF AP20: str:' command
in the BATCH.CMD file on the PS: structure for the LOGIN
account from which you will SUBMIT this control file. However,
you will have to edit this control file if you choose not to use
<AUTOPATCH.APL> as the distribution directory.
To execute this control file, issue the following command:
@SUBMIT AP20:<AUTOPATCH>APL2B2.DDC
INSTAL.DOC for DECSYSTEM-20 page 6
January 5, 1981
3.2 APLSF-20
The disk directory in which you have installed the executable
files for APLSF-20 is referred to as the product installation
directory. In most cases this will be PS:<SUBSYS> or one of the
directories belonging to SYS:. This directory must contain
the files:
APLSF.EXE
GENSF.EXE
APLTAP.EXE
You will need to copy the following files from the APLSF-20
distribution tape BB-5137E-BM into the disk directory you have
set up as the APLSF-20 distribution directory.
From save set "REL LIBRARY FOR TOPS-20 APLSF VERSION 2"
APLS22.REL
APLG22.REL
APLW22.REL
APLS22.LNK
APLG22.LNK
APLW22.LNK
A batch control file to perform this operation has been included
in the installation save set on this patch tape. This file will
issue a mount request for the APLSF-20 distribution tape and
then restore the appropriate files to the logical name DIS:. In
this batch file, DIS: is defined to be AP20:<AUTOPATCH.APL>.
If you wish to use this control file, but are not using an AP20:
structure, you will want to include a 'DEF AP20: str:' command
in the BATCH.CMD file on the PS: structure for the LOGIN
account from which you will SUBMIT this control file. However,
you will have to edit this control file if you choose not to use
<AUTOPATCH.APL> as the distribution directory.
To execute this control file, issue the following command:
@SUBMIT AP20:<AUTOPATCH>APL2S2.DDC
INSTAL.DOC for DECSYSTEM-20 page 7
January 5, 1981
4.0 PREPARING FOR AUTOPATCHING TOPS-20
The monitor and EXEC for all supported hardware configurations
are autopatchable with Autopatch-10/20. Before preparing
TOPS-20 for autopatching, the monitor and EXEC should be
installed on your system as described in the installation
documentation for TOPS-20. The directory PS:<SYSTEM> in which
you have installed the executable files for the monitor and EXEC
is referred to as the installation directory. This directory
must contain the files:
MONITR.EXE
EXEC.EXE
BUGSTRINGS.TXT
To make the product autopatchable, some of the files from the
product distribution tape will have to be installed in the disk
directory that you have set up as the TOPS-20 product
distribution directory. Refer to sections 4.1 through 4.5 to
determine which files you need for your particular TOPS-20
configuration.
4.1 TOPS-20-2020
For TOPS-20-2020, you will need to obtain files from the
distribution tape BB-868C-BM. A batch control file to perform
this operation has been included in the installation save set on
this patch tape. This file will issue a mount request for the
TOPS-20 distribution tape and then restore the appropriate files
to the logical name DIS:. In this control file, DIS: is
defined to be AP20:<AUTOPATCH.TOPS20>. If you wish to use this
control file, but are not using an AP20: structure, you will
want to include a 'DEF AP20: str:' command in the BATCH.CMD
file on the PS: structure for the LOGIN account from which you
will SUBMIT this control file. However, you will have to edit
this control file if you choose not to use <AUTOPATCH.TOPS20> as
the distribution directory. After creating the product
distribution directory, submit the required control file as a
batch job.
@SUBMIT AP20:<AUTOPATCH>T20204-SML.DDC for SMALL monitor
@SUBMIT AP20:<AUTOPATCH>T20204-MED.DDC for MEDIUM monitor
Since there are a number of files involved and some of the files
must be renamed, we recommend that you use the control file to
set up the directory.
INSTAL.DOC for DECSYSTEM-20 page 8
January 5, 1981
4.2 TOPS-20-2040 and TOPS-20-2050
For TOPS-20-2040 and TOPS-20-2050, you will need to obtain files
from the distribution tape BB-4712G-BM. A batch control file to
perform this operation has been included in the installation
save set on this patch tape. This file will issue a mount
request for the TOPS-20 distribution tape and then restore the
appropriate files to the logical name DIS:. In this control
file, is defined to be AP20:<AUTOPATCH.TOPS-20>. If you wish to
use this control file, but are not using an AP20: structure,
you will want to include a 'DEF AP20: str:' command in the
BATCH.CMD file on the PS: structure for the LOGIN account from
which you will SUBMIT this control file. However, you will have
to edit this control file if you choose not to use
<AUTOPATCH.TOPS-20> as the distribution directory. After
creating the product distribution directory, submit the required
control file as a batch job.
@SUBMIT AP20:<AUTOPATCH>T20404-SML.DDC for SMALL monitor
@SUBMIT AP20:<AUTOPATCH>T20404-SML-128.DDC for SMALL monitor (128K)
@SUBMIT AP20:<AUTOPATCH>T20404-MED.DDC for MEDIUM monitor
@SUBMIT AP20:<AUTOPATCH>T20404-BIG.DDC for BIG monitor
@SUBMIT AP20:<AUTOPATCH>T20404-BCH.DDC for BATCH monitor
Since there are a number of files involved and some of the files
must be renamed, we recommend that you use the control file to
set up the directory.
4.3 TOPS-20-2060
For TOPS-20-2060, you will need to obtain files from the
distribution tape BB-H138B-BM. A batch control file to perform
this operation has been included in the installation save set on
this patch tape. This file will issue a mount request for the
TOPS-20 distribution tape and then restore the appropriate files
to the logical name DIS:. In this control file, DIS: is
defined to be AP20:<AUTOPATCH.TOPS-20>. If you wish to use this
control file, but are not using an AP20: structure, you will
want to include a 'DEF AP20: str:' command in the BATCH.CMD
file on the PS: structure for the LOGIN account from which you
will SUBMIT this control file. However, you will have to edit
this control file if you choose not to use <AUTOPATCH.TOPS-20>
as the distribution directory. After creating the product
distribution directory, submit the required control file as a
batch job.
@SUBMIT AP20:<AUTOPATCH>T20604-BIG.DDC for BIG monitor
@SUBMIT AP20:<AUTOPATCH>T20604-MAX.DDC for MAXIMUM monitor
Since there are a number of files involved and some of the files
must be renamed, we recommend that you use the control file to
set up the directory.
INSTAL.DOC for DECSYSTEM-20 page 9
January 5, 1981
4.4 TOPS-20-KL-ARPA
For TOPS-20-KL-ARPA, you will need to obtain files from the
distribution tape BB-5255D-BM. A batch control file to perform
this operation has been included in the installation save set on
this patch tape. This file will issue a mount request for the
TOPS-20 distribution tape and then restore the appropriate files
to the logical name DIS:. In this control file, DIS: is defined
to be AP20:<AUTOPATCH.TOPS-20>. If you wish to use this control
file, but are not using an AP20: structure, you will want to
include a 'DEF AP20: str:' command in the BATCH.CMD file on the
PS: structure for the LOGIN account from which you will SUBMIT
this control file. However, you will have to edit this control
file if you choose not to use <AUTOPATCH.TOPS-20> as the
distribution directory. After creating the product distribution
directory, submit the required control file as a batch job.
@SUBMIT AP20:<AUTOPATCH>T20AL4-SML.DDC for SMALL monitor
@SUBMIT AP20:<AUTOPATCH>T20AL4-MED.DDC for MEDIUM monitor
@SUBMIT AP20:<AUTOPATCH>T20AL4-BIG.DDC for BIG monitor
@SUBMIT AP20:<AUTOPATCH>T20AL4-LGE.DDC for LARGE monitor
Since there are a number of files involved and some of the files
must be modified, we recommend that you use the control file to
set up the directory.
4.5 TOPS-20-KS-ARPA
For TOPS-20-KS-ARPA, you will need files from the distribution
tape BB-H138B-BM. A batch control file to perform this
operation has been included in the installation save set on this
patch tape. This file will issue a mount request for the
TOPS-20 distribution tape and then restore the appropriate files
to the logical name DIS:. In this control file, DIS: is
defined to be AP20:<AUTOPATCH.TOPS-20>. If you wish to use this
control file, but are not using an AP20: structure, you will
want to include a 'DEF AP20: str:' command in the BATCH.CMD
file on the PS: structure for the LOGIN account from which you
will SUBMIT this control file. However, you will have to edit
this control file if you choose not to use <AUTOPATCH.TOPS-20>
as the distribution directory. After creating the product
distribution directory, submit the required control file as a
batch job.
@SUBMIT AP20:<AUTOPATCH>T20AS4-SML.DDC for SMALL monitor
@SUBMIT AP20:<AUTOPATCH>T20AS4-MED.DDC for MEDIUM monitor
Since there are a number of files involved and some of the files
must be renamed, we recommend that you use the control file to
set up the directory.
INSTAL.DOC for DECSYSTEM-20 page 10
January 5, 1981
5.0 CONTENTS OF INSTALLATION SAVE SET
File Description
---- -----------
PEP.EXE Patch Exec Program
PEPB.EXE Patch Exec for batch
PEP201.PDF TOPS-20 Product Description File for PEP
PEP.HLP PEP help file
INSTAL.DOC Installation Documentation for Autopatch-10/20
APL2S2.CTL APLSF-20 patch and build batch control file
APL2B2.CTL APL-20 patch and build batch control file
T20204.CTL TOPS-20-2020 patch and build batch control file
T20404.CTL TOPS-20-2040 patch and build batch control file
T20604.CTL TOPS-20-2060 patch and build batch control file
T20AL4.CTL TOPS-20-KL-ARPA patch and build batch control file
T20AS4.CTL TOPS-20-KS-ARPA patch and build batch control file
APL2S2.DDC CTL file for preparing APLSF-20 distribution area
APL2B2.DDC CTL file for preparing APL-20 distribution area
T20204-SML.DDC CTL file for preparing TOPS-20-2020
distribution area for SMALL monitor
T20204-MED.DDC CTL file for preparing TOPS-20-2020
distribution area for MEDIUM monitor
T20404-SML.DDC CTL file for preparing TOPS-20-2040 / 2050
distribution area for SMALL monitor
T20404-SML-128.DDC CTL file for preparing TOPS-20-2040 / 2050
distribution area for SMALL monitor 128K or less
T20404-MED.DDC CTL file for preparing TOPS-20-2040 / 2050
distribution area for MEDIUM monitor
T20404-BIG.DDC CTL file for preparing TOPS-20-2040 / 2050
distribution area for BIG monitor
T20404-BCH.DDC CTL file for preparing TOPS-20-2040 / 2050
distribution area for BATCH monitor
T20604-BIG.DDC CTL file for preparing TOPS-20-2060
distribution area for BIG monitor
T20604-MAX.DDC CTL file for preparing TOPS-20-2060
distribution area for MAXIMUM monitor
T20AL4-SML.DDC CTL file for preparing TOPS-20-KL-ARPA
distribution area for SMALL monitor
T20AL4-MED.DDC CTL file for preparing TOPS-20-KL-ARPA
distribution area for MEDIUM monitor
T20AL4-BIG.DDC CTL file for preparing TOPS-20-KL-ARPA
distribution area for BIG monitor
T20AL4-LGE.DDC CTL file for preparing TOPS-20-KL-ARPA
distribution area for LARGE monitor
T20AS4-SML.DDC CTL file for preparing TOPS-20-KS-ARPA
distribution area for SMALL monitor
T20AS4-MED.DDC CTL file for preparing TOPS-20-KS-ARPA
distribution area for MEDIUM monitor
AUTINS.DIR Checksummed directory of the Autopatch
Installation area