Trailing-Edge
-
PDP-10 Archives
-
BB-L014C-BM
-
autopatch/readme.003
There is 1 other file named readme.003 in the archive. Click here to see a list.
1.0 INTRODUCTION
This is the third Autopatch set. It contains patches for APL-V2 and
TOPS-20-V4. To install Autopatch for the first time, you must first
restore the second save set and follow the instructions found in the
Autopatch Procedures/Reference Manual and the INSTAL.DOC file.
Information specific to each product is recorded in section 5.0 of this
document.
2.0 EXECEPTIONS
+TOPS-20-V4 users should read the T20BW4.003 file which has beware
information about specific edits to the monitor and exec.
+APL-20-V2 users should read the APLBW2.003 file which has beware
information about specific edits.
+PEP and PEPB may report that MAKLIB has the wrong version and checksum.
The correct version is 2B(104) and the correct checksum is 535431. The
warning message is wrong and the problem will be corrected in the
future.
+If you are using a model 2020 and will be patching the TOPS-20-V4
product you should use the /TIME switch with the SUBMIT command to
specify a limit of two hours (/TIME:2:00:00). Our experience has been
that one hour may not be quite enough.
+Autopatch is offered as a software maintenance alternative to manually
applying the patches distributed in The Software Dispatch. All PCO's
for the TOPS-20 Monitor and Exec are automatically included in the
versions built with Autopatch. The Autopatch Monitor and Exec include
the source version of these edits. The Software Dispatch provides the
DDT patch version of most of these edits.
Applying the published DDT patch version of an edit to the autopatched
Monitor or Exec is not reliable, not supported and not usually required.
If you find a DDT patch for an edit that is not yet included and you
feel compelled to apply it to the autopatched product, extreme caution
is urged - it may not work!
3.0 RELATED DOCUMENTS
TOPS-10/TOPS-20 Autopatch Procedures/Reference Manual (AA-H729A-TK)
INSTAL.DOC (in Installation Save Set on this tape)
Page 2
4.0 FILE INDEX
Patch Set 003
File Description
README.003 Patch Set 003 Master Documentation File
TAP003.DIR Directory with Checksums of Patch Set 003
PAT203.DPD Patch Directory File for Patch Set 003
APEDIT.RPT Autopatch Edit Report
APLBW2.003 APL-V2 Edit Beware File
T20BW4.003 TOPS-20-V4 Edit Beware file
Edit Description Files
APL2S2.D03 APLSF-20-V2 Edit Description File
APL2B2.D03 APL-20-V2 Edit Description File
T20204.D03 TOPS-20-2020-V4 Edit Description File
T20404.D03 TOPS-20-2040-V4 Edit Description File
T20604.D03 TOPS-20-2060-V4 Edit Description File
T20AL4.D03 TOPS-20-KL-ARPA-V4 Edit Description File
T20AS4.D03 TOPS-20-KS-ARPA-V4 Edit Description File
Product Patch and Build LOG Files
APL2B2.L03 LOG file for APL-20
APL2S2.L03 LOG file for APLSF-20
T20204-MED.L03 LOG file for TOPS-20-2020 MEDIUM
T20204-SML.L03 LOG file for TOPS-20-2020 SMALL
T20404-BCH.L03 LOG file for TOPS-20-2040 BATCH
T20404-BIG.L03 LOG file for TOPS-20-2040 BIG
T20404-MED.L03 LOG file for TOPS-20-2040 MEDIUM
T20404-SML.L03 LOG file for TOPS-20-2040 SMALL
T20404-SML-128.L03 LOG file for TOPS-20-2040 SMALL 128K or less
T20604-BIG.L03 LOG file for TOPS-20-2060 BIG
T20604-MAX.L03 LOG file for TOPS-20-2060 MAXIMUM
T20AL4-BIG.L03 LOG file for TOPS-20-KL-ARPA BIG
T20AL4-LGE.L03 LOG file for TOPS-20-KL-ARPA LARGE
T20AL4-MED.L03 LOG file for TOPS-20-KL-ARPA MEDIUM
T20AL4-SML.L03 LOG file for TOPS-20-KL-ARPA SMALL
T20AS4-MED.L03 LOG file for TOPS-20-KS-ARPA MEDIUM
T20AS4-SML.L03 LOG file for TOPS-20-KS-ARPA SMALL
Patch Files
APLS22.R03 APLSF-20-V2 APLS22.REL Patch File
APLW22.R03 APLSF-20-V2 APLW22.REL Patch File
APLB22.R03 APL-20-V2 APLB22.REL Patch File
T202M4.R03 TOPS-20-2020-V4 T202M4.REL Patch File
T204M4.R03 TOPS-20-2040-V4 T204M4.REL Patch File
T206M4.R03 TOPS-20-2060-V4 T206M4.REL Patch File
T20EX4.R03 TOPS-20-V4 (EXEC) T20EX4.REL Patch File
T20LM4.R03 TOPS-20-KL-ARPA-V4 T20LM4.REL Patch File
T20SM4.R03 TOPS-20-KS-ARPA-V4 T20SM4.REL Patch File
Page 3
Modified System Files
MONSYM.MAC
MONSYM.REL
MONSYM.UNV
PROLOG.UNV
STG.MAC
VERSIO.MAC
Patch Dumper Control Files
APL2B2.P03 Restores files from Patch Set #003 for APL-20-V2
APL2S2.P03 Restores files from Patch Set #003 for APLSF-20-V2
T20204.P03 Restores files from Patch Set #003 for TOPS-20-2020-V4
T20404.P03 Restores files from Patch Set #003 for TOPS-20-2040-V4
T20604.P03 Restores files from Patch Set #003 for TOPS-20-2060-V4
T20AL4.P03 Restores files from Patch Set #003 for TOPS-20-KL-ARPA-V4
T20AS4.P03 Restores files from Patch Set #003 for TOPS-20-KS-ARPA-V4
APL2B2.A03 Restores files from all Patch Sets for APL-20-V2
APL2S2.A03 Restores files from all Patch Sets for APLSF-20-V2
T20204.A03 Restores files from all Patch Sets for TOPS-20-2020-V4
T20404.A03 Restores files from all Patch Sets for TOPS-20-2040-V4
T20604.A03 Restores files from all Patch Sets for TOPS-20-2060-V4
T20AL4.A03 Restores files from all Patch Sets for TOPS-20-KL-ARPA-V4
T20AS4.A03 Restores files from all Patch Sets for TOPS-20-KS-ARPA-V4
5.0 PRODUCT DOCUMENTATION
Page 4
APL-20-V2 Product Information PRODUCT CODE:
Patch Set 003 APL2B2
This patch set provides the required files to update APL-20-V2 to edit
level 530.
If you are patching the product for the first time, you must build
several disk areas and obtain some files from the APL-20 distribution
tape. This process is described in the INSTAL.DOC file in the second
save set on this tape and in the Autopatch Procedures/Reference Manual.
The APL2B2.DDC Distribution Dumper Control File found in the
Installation Save Set may be used for this purpose.
A description of each edit is contained in the Edit Description file in
Patch Set 003 (APL2B2.D03). A sample Patch & Build log file
(APL2B2.L03) is provided. You may want to compare your Build with this
log file.
The files required from Patch Set 003 to patch this product are:
PAT203.DPD
APLB22.R03
You may use the APL2B2.P03 Patch Dumper Control file to restore files
from Patch Set 003. If using Autopatch for the first time on this
product you may use the APL2B2.A03 Patch Dumper Control file to restore
files from all Patch Sets.
Page 5
APLSF-20-V2 Product Information PRODUCT CODE:
Patch Set 003 APL2S2
This patch set provides the required files to update APLSF-20-V2 to edit
level 530.
If you are patching the product for the first time, you must build
several disk areas and obtain some files from the APLSF-20 distribution
tape. This process is described in the INSTAL.DOC file in the second
save set on this tape and in the Autopatch Procedures/Reference Manual.
The APL2S2.DDC Distribution Dumper Control file found in the
Installation Save Set may be used for this purpose.
A description of each edit is contained in the Edit Description file in
Patch Set 003 (APL2S2.D03). A sample Patch & Build log file
(APL2S2.L03) is provided. You may want to compare your Build with this
log file.
The files required from Patch Set 003 to patch this product are:
PAT203.DPD
APLS22.R03
You may use the APL2S2.P03 Patch Dumper Control file to restore files
from Patch Set 003. If using Autopatch for the first time on this
product you may use the APL2S2.A03 Patch Dumper Control file to restore
files from all Patch Sets.
Page 6
TOPS-20-2020-V4 Product Information PRODUCT CODE:
Patch Set 003 T20204
This patch set provides the required files to update the 2020 version of
the TOPS-20 monitor to edit level 1959 and the EXEC to level 638.
If you are patching the product for the first time, you must build
several disk areas and obtain some files from the TOPS-20 distribution
tape. This process is described in the INSTAL.DOC file in the second
save set on this tape and in the Autopatch Procedures/Reference Manual.
The T20204-XXX Distribution Dumper Control files found in the
Installation Save Set may be used for this purpose.
A description of each edit is contained in the Edit Description file in
Patch Set 003 (T20204.D03). Sample Patch & Build log files are also
provided. You may want to compare your Build with this log file.
You should use the /TIME switch on the SUBMIT command to allow for more
than an hour limit (/TIME:2:00:00). Our experience has been that one
hour is not quite enough.
The files required from Patch Set 003 to patch this product are:
MACSYM.UNV
PAT203.DPD
PROKS.UNV
PROLOG.UNV
STG.MAC
T202M4.R03
T20EX4.R03
VERSIO.MAC
You may use the T20204.P03 Patch Dumper Control file to restore files
from Patch Set 003. If using Autopatch for the first time on this
product you may use the T20204.A03 Patch Dumper Control file to restore
files from all Patch Sets.
Page 7
TOPS-20-2040-V4 Product Information PRODUCT CODE:
Patch Set 003 T20404
This patch set provides the required files to update the 2040 version of
the TOPS-20 monitor to edit level 1959 and the EXEC to level 638.
If you are patching the product for the first time, you must build
several disk areas and obtain some files from the TOPS-20 distribution
tape. This process is described in the INSTAL.DOC file in the second
save set on this tape and in the Autopatch Procedures/Reference Manual.
The T20404-XXX Distribution Dumper Control files found in the
Installation Save Set may be used for this purpose.
A description of each edit is contained in the Edit Description file in
Patch Set 003 (T20404.D03). Sample Patch & Build log files are also
provided. You may want to compare your Build with this log file.
The files required from Patch Set 003 to patch this product are:
MACSYM.UNV
PAT203.DPD
PROLOG.UNV
STG.MAC
T204M4.R03
T20EX4.R03
VERSIO.MAC
You may use the T20404.P03 Patch Dumper Control file to restore files
from Patch Set 003. If using Autopatch for the first time on this
product you may use the T20404.A03 Patch Dumper Control file to restore
files from all Patch Sets.
Page 8
TOPS-20-2060-V4 Product Information PRODUCT CODE:
Patch Set 003 T20604
This patch set provides the required files to update the 2060 version of
the TOPS-20 monitor to edit level 1959 and the EXEC to level 638.
If you are patching the product for the first time, you must build
several disk areas and obtain some files from the TOPS-20 distribution
tape. This process is described in the INSTAL.DOC file in the second
save set on this tape and in the Autopatch Procedures/Reference Manual.
The T20604-XXX Distribution Dumper Control files found in the
Installation Save Set may be used for this purpose.
A description of each edit is contained in the Edit Description file in
Patch Set 003 (T20604.D03). Sample Patch & Build log files are also
provided. You may want to compare your Build with this log file.
The files required from Patch Set 003 to patch this product are:
MACSYM.UNV
PAT203.DPD
PROLOG.UNV
STG.MAC
T206M4.R03
T20EX4.R03
VERSIO.MAC
You may use the T20604.P03 Patch Dumper Control file to restore files
from Patch Set 003. If using Autopatch for the first time on this
product you may use the T20604.A03 Patch Dumper Control file to restore
files from all Patch Sets.
Page 9
TOPS-20-KL-ARPA-V4 Product Information PRODUCT CODE:
Patch Set 003 T20AL4
This patch set provides the required files to update the KL-ARPA version
of the TOPS-20 monitor to edit level 1959 and the EXEC to level 638.
If you are patching the product for the first time, you must build
several disk areas and obtain some files from the TOPS-20 distribution
tape. This process is described in the INSTAL.DOC file in the second
save set on this tape and in the Autopatch Procedures/Reference Manual.
The T20AL4-XXX Distribution Dumper Control files found in the
Installation Save Set may be used for this purpose.
A description of each edit is contained in the Edit Description file in
Patch Set 003 (T20AL4.D03). Sample Patch & Build log files are also
provided. You may want to compare your Build with this log file.
The files required from Patch Set 003 to patch this product are:
MACSYM.UNV
PAT203.DPD
PROLOG.UNV
STG.MAC
T20LM4.R03
T20EX4.R03
VERSIO.MAC
You may use the T20AL4.P03 Patch Dumper Control file to restore files
from Patch Set 003. If using Autopatch for the first time on this
product you may use the T20AL4.A03 Patch Dumper Control file to restore
files from all Patch Sets.
Page 10
TOPS-20-KS-ARPA-V4 Product Information PRODUCT CODE:
Patch Set 003 T20AS4
This patch set provides the required files to update the KS-ARPA version
of the TOPS-20 monitor to edit level 1959 and the EXEC to level 638.
If you are patching the product for the first time, you must build
several disk areas and obtain some files from the TOPS-20 distribution
tape. This process is described in the INSTAL.DOC file in the second
save set on this tape and in the Autopatch Procedures/Reference Manual.
The T20AS4-XXX Distribution Dumper Control files found in the
Installation Save Set may be used for this purpose.
A description of each edit is contained in the Edit Description file in
Patch Set 003 (T20AS4.D03). Sample Patch & Build log files are also
provided. You may want to compare your Build with this log file.
The files required from Patch Set 003 to patch this product are:
MACSYM.UNV
PAT203.DPD
PROKS.UNV
PROLOG.UNV
STG.MAC
T20SM4.R03
T20EX4.R03
VERSIO.MAC
You may use the T20AS4.P03 Patch Dumper Control file to restore files
from Patch Set 003. If using Autopatch for the first time on this
product you may use the T20AS4.A03 Patch Dumper Control file to restore
files from all Patch Sets.