Google
 

Trailing-Edge - PDP-10 Archives - BB-L014E-BM - autopatch/readme.003
There is 1 other file named readme.003 in the archive. Click here to see a list.


1.0  INTRODUCTION

This is the third Autopatch set.  It contains  patches  for  APL-V2  and
TOPS-20-V4.   To  install  Autopatch  for the first time, you must first
restore the second save set and follow the  instructions  found  in  the
Autopatch   Procedures/Reference   Manual   and   the  INSTAL.DOC  file.
Information specific to each product is recorded in section 5.0 of  this
document.



2.0  EXECEPTIONS

+TOPS-20-V4 users should read  the  T20BW4.003  file  which  has  beware
information about specific edits to the monitor and exec.

+APL-20-V2 users should  read  the  APLBW2.003  file  which  has  beware
information about specific edits.

+PEP and PEPB may report that MAKLIB has the wrong version and checksum.
The  correct version is 2B(104) and the correct checksum is 535431.  The
warning message is wrong and  the  problem  will  be  corrected  in  the
future.

+If you are using a model 2020  and  will  be  patching  the  TOPS-20-V4
product  you  should  use  the  /TIME  switch with the SUBMIT command to
specify a limit of two hours (/TIME:2:00:00).  Our experience  has  been
that one hour may not be quite enough.

+Autopatch is offered as a software maintenance alternative to  manually
applying  the  patches  distributed in The Software Dispatch.  All PCO's
for the TOPS-20 Monitor and  Exec  are  automatically  included  in  the
versions  built  with Autopatch.  The Autopatch Monitor and Exec include
the source version of these edits.  The Software Dispatch  provides  the
DDT patch version of most of these edits.

Applying the published DDT patch version of an edit to  the  autopatched
Monitor or Exec is not reliable, not supported and not usually required.

If you find a DDT patch for an edit that is not  yet  included  and  you
feel  compelled  to apply it to the autopatched product, extreme caution
is urged - it may not work!



3.0  RELATED DOCUMENTS

TOPS-10/TOPS-20 Autopatch Procedures/Reference Manual (AA-H729A-TK)
INSTAL.DOC      (in Installation Save Set on this tape)
                                                                  Page 2


4.0  FILE INDEX

Patch Set 003

File            Description

README.003      Patch Set 003 Master Documentation File
TAP003.DIR      Directory with Checksums of Patch Set 003
PAT203.DPD      Patch Directory File for Patch Set 003
APEDIT.RPT      Autopatch Edit Report
APLBW2.003      APL-V2 Edit Beware File
T20BW4.003      TOPS-20-V4 Edit Beware file

Edit Description Files

APL2S2.D03      APLSF-20-V2             Edit Description File
APL2B2.D03      APL-20-V2               Edit Description File
T20204.D03      TOPS-20-2020-V4         Edit Description File
T20404.D03      TOPS-20-2040-V4         Edit Description File
T20604.D03      TOPS-20-2060-V4         Edit Description File
T20AL4.D03      TOPS-20-KL-ARPA-V4      Edit Description File
T20AS4.D03      TOPS-20-KS-ARPA-V4      Edit Description File

Product Patch and Build LOG Files

APL2B2.L03              LOG file for APL-20
APL2S2.L03              LOG file for APLSF-20
T20204-MED.L03          LOG file for TOPS-20-2020 MEDIUM
T20204-SML.L03          LOG file for TOPS-20-2020 SMALL
T20404-BCH.L03          LOG file for TOPS-20-2040 BATCH
T20404-BIG.L03          LOG file for TOPS-20-2040 BIG
T20404-MED.L03          LOG file for TOPS-20-2040 MEDIUM
T20404-SML.L03          LOG file for TOPS-20-2040 SMALL
T20404-SML-128.L03      LOG file for TOPS-20-2040 SMALL 128K or less
T20604-BIG.L03          LOG file for TOPS-20-2060 BIG
T20604-MAX.L03          LOG file for TOPS-20-2060 MAXIMUM
T20AL4-BIG.L03          LOG file for TOPS-20-KL-ARPA BIG
T20AL4-LGE.L03          LOG file for TOPS-20-KL-ARPA LARGE
T20AL4-MED.L03          LOG file for TOPS-20-KL-ARPA MEDIUM
T20AL4-SML.L03          LOG file for TOPS-20-KL-ARPA SMALL
T20AS4-MED.L03          LOG file for TOPS-20-KS-ARPA MEDIUM
T20AS4-SML.L03          LOG file for TOPS-20-KS-ARPA SMALL

Patch Files

APLS22.R03      APLSF-20-V2             APLS22.REL Patch File
APLW22.R03      APLSF-20-V2             APLW22.REL Patch File
APLB22.R03      APL-20-V2               APLB22.REL Patch File
T202M4.R03      TOPS-20-2020-V4         T202M4.REL Patch File
T204M4.R03      TOPS-20-2040-V4         T204M4.REL Patch File
T206M4.R03      TOPS-20-2060-V4         T206M4.REL Patch File
T20EX4.R03      TOPS-20-V4 (EXEC)       T20EX4.REL Patch File
T20LM4.R03      TOPS-20-KL-ARPA-V4      T20LM4.REL Patch File
T20SM4.R03      TOPS-20-KS-ARPA-V4      T20SM4.REL Patch File
                                                                  Page 3


Modified System Files

MONSYM.MAC
MONSYM.REL
MONSYM.UNV
PROLOG.UNV
STG.MAC
VERSIO.MAC

Patch Dumper Control Files

APL2B2.P03      Restores files from Patch Set #003 for APL-20-V2
APL2S2.P03      Restores files from Patch Set #003 for APLSF-20-V2
T20204.P03      Restores files from Patch Set #003 for TOPS-20-2020-V4
T20404.P03      Restores files from Patch Set #003 for TOPS-20-2040-V4
T20604.P03      Restores files from Patch Set #003 for TOPS-20-2060-V4
T20AL4.P03      Restores files from Patch Set #003 for TOPS-20-KL-ARPA-V4
T20AS4.P03      Restores files from Patch Set #003 for TOPS-20-KS-ARPA-V4

APL2B2.A03      Restores files from all Patch Sets for APL-20-V2
APL2S2.A03      Restores files from all Patch Sets for APLSF-20-V2
T20204.A03      Restores files from all Patch Sets for TOPS-20-2020-V4
T20404.A03      Restores files from all Patch Sets for TOPS-20-2040-V4
T20604.A03      Restores files from all Patch Sets for TOPS-20-2060-V4
T20AL4.A03      Restores files from all Patch Sets for TOPS-20-KL-ARPA-V4
T20AS4.A03      Restores files from all Patch Sets for TOPS-20-KS-ARPA-V4



5.0  PRODUCT DOCUMENTATION
                                                                  Page 4


APL-20-V2               Product Information             PRODUCT CODE:
                          Patch Set 003                 APL2B2

This patch set provides the required files to update APL-20-V2  to  edit
level 530.

If you are patching the product for  the  first  time,  you  must  build
several  disk  areas  and obtain some files from the APL-20 distribution
tape.  This process is described in the INSTAL.DOC file  in  the  second
save  set on this tape and in the Autopatch Procedures/Reference Manual.
The  APL2B2.DDC  Distribution  Dumper  Control   File   found   in   the
Installation Save Set may be used for this purpose.

A description of each edit is contained in the Edit Description file  in
Patch   Set   003  (APL2B2.D03).   A  sample  Patch  &  Build  log  file
(APL2B2.L03) is provided.  You may want to compare your Build with  this
log file.

The files required from Patch Set 003 to patch this product are:

PAT203.DPD
APLB22.R03

You may use the APL2B2.P03 Patch Dumper Control file  to  restore  files
from  Patch  Set  003.   If  using  Autopatch for the first time on this
product you may use the APL2B2.A03 Patch Dumper Control file to  restore
files from all Patch Sets.
                                                                  Page 5


APLSF-20-V2             Product Information             PRODUCT CODE:
                          Patch Set 003                 APL2S2

This patch set provides the required files to update APLSF-20-V2 to edit
level 530.

If you are patching the product for  the  first  time,  you  must  build
several  disk areas and obtain some files from the APLSF-20 distribution
tape.  This process is described in the INSTAL.DOC file  in  the  second
save  set on this tape and in the Autopatch Procedures/Reference Manual.
The  APL2S2.DDC  Distribution  Dumper  Control   file   found   in   the
Installation Save Set may be used for this purpose.

A description of each edit is contained in the Edit Description file  in
Patch   Set   003  (APL2S2.D03).   A  sample  Patch  &  Build  log  file
(APL2S2.L03) is provided.  You may want to compare your Build with  this
log file.

The files required from Patch Set 003 to patch this product are:

PAT203.DPD
APLS22.R03

You may use the APL2S2.P03 Patch Dumper Control file  to  restore  files
from  Patch  Set  003.   If  using  Autopatch for the first time on this
product you may use the APL2S2.A03 Patch Dumper Control file to  restore
files from all Patch Sets.
                                                                  Page 6


TOPS-20-2020-V4         Product Information             PRODUCT CODE:
                          Patch Set 003                 T20204

This patch set provides the required files to update the 2020 version of
the TOPS-20 monitor to edit level 1959 and the EXEC to level 638.

If you are patching the product for  the  first  time,  you  must  build
several  disk  areas and obtain some files from the TOPS-20 distribution
tape.  This process is described in the INSTAL.DOC file  in  the  second
save  set on this tape and in the Autopatch Procedures/Reference Manual.
The  T20204-XXX  Distribution  Dumper  Control  files   found   in   the
Installation Save Set may be used for this purpose.

A description of each edit is contained in the Edit Description file  in
Patch  Set  003  (T20204.D03).   Sample Patch & Build log files are also
provided.  You may want to compare your Build with this log file.

You should use the /TIME switch on the SUBMIT command to allow for  more
than  an  hour  limit (/TIME:2:00:00).  Our experience has been that one
hour is not quite enough.

The files required from Patch Set 003 to patch this product are:

MONSYM.REL
MONSYM.UNV
PAT203.DPD
PROLOG.UNV
STG.MAC
T202M4.R03
T20EX4.R03
VERSIO.MAC

You may use the T20204.P03 Patch Dumper Control file  to  restore  files
from  Patch  Set  003.   If  using  Autopatch for the first time on this
product you may use the T20204.A03 Patch Dumper Control file to  restore
files from all Patch Sets.
                                                                  Page 7


TOPS-20-2040-V4         Product Information             PRODUCT CODE:
                          Patch Set 003                 T20404

This patch set provides the required files to update the 2040 version of
the TOPS-20 monitor to edit level 1959 and the EXEC to level 638.

If you are patching the product for  the  first  time,  you  must  build
several  disk  areas and obtain some files from the TOPS-20 distribution
tape.  This process is described in the INSTAL.DOC file  in  the  second
save  set on this tape and in the Autopatch Procedures/Reference Manual.
The  T20404-XXX  Distribution  Dumper  Control  files   found   in   the
Installation Save Set may be used for this purpose.

A description of each edit is contained in the Edit Description file  in
Patch  Set  003  (T20404.D03).   Sample Patch & Build log files are also
provided.  You may want to compare your Build with this log file.

The files required from Patch Set 003 to patch this product are:

MONSYM.REL
MONSYM.UNV
PAT203.DPD
PROLOG.UNV
STG.MAC
T204M4.R03
T20EX4.R03
VERSIO.MAC

You may use the T20404.P03 Patch Dumper Control file  to  restore  files
from  Patch  Set  003.   If  using  Autopatch for the first time on this
product you may use the T20404.A03 Patch Dumper Control file to  restore
files from all Patch Sets.
                                                                  Page 8


TOPS-20-2060-V4         Product Information             PRODUCT CODE:
                          Patch Set 003                 T20604

This patch set provides the required files to update the 2060 version of
the TOPS-20 monitor to edit level 1959 and the EXEC to level 638.

If you are patching the product for  the  first  time,  you  must  build
several  disk  areas and obtain some files from the TOPS-20 distribution
tape.  This process is described in the INSTAL.DOC file  in  the  second
save  set on this tape and in the Autopatch Procedures/Reference Manual.
The  T20604-XXX  Distribution  Dumper  Control  files   found   in   the
Installation Save Set may be used for this purpose.

A description of each edit is contained in the Edit Description file  in
Patch  Set  003  (T20604.D03).   Sample Patch & Build log files are also
provided.  You may want to compare your Build with this log file.

The files required from Patch Set 003 to patch this product are:

MONSYM.REL
MONSYM.UNV
PAT203.DPD
PROLOG.UNV
STG.MAC
T206M4.R03
T20EX4.R03
VERSIO.MAC

You may use the T20604.P03 Patch Dumper Control file  to  restore  files
from  Patch  Set  003.   If  using  Autopatch for the first time on this
product you may use the T20604.A03 Patch Dumper Control file to  restore
files from all Patch Sets.
                                                                  Page 9


TOPS-20-KL-ARPA-V4      Product Information             PRODUCT CODE:
                          Patch Set 003                 T20AL4

This patch set provides the required files to update the KL-ARPA version
of the TOPS-20 monitor to edit level 1959 and the EXEC to level 638.

If you are patching the product for  the  first  time,  you  must  build
several  disk  areas and obtain some files from the TOPS-20 distribution
tape.  This process is described in the INSTAL.DOC file  in  the  second
save  set on this tape and in the Autopatch Procedures/Reference Manual.
The  T20AL4-XXX  Distribution  Dumper  Control  files   found   in   the
Installation Save Set may be used for this purpose.

A description of each edit is contained in the Edit Description file  in
Patch  Set  003  (T20AL4.D03).   Sample Patch & Build log files are also
provided.  You may want to compare your Build with this log file.

The files required from Patch Set 003 to patch this product are:

MONSYM.REL
MONSYM.UNV
PAT203.DPD
PROLOG.UNV
STG.MAC
T20LM4.R03
T20EX4.R03
VERSIO.MAC

You may use the T20AL4.P03 Patch Dumper Control file  to  restore  files
from  Patch  Set  003.   If  using  Autopatch for the first time on this
product you may use the T20AL4.A03 Patch Dumper Control file to  restore
files from all Patch Sets.
                                                                 Page 10


TOPS-20-KS-ARPA-V4      Product Information             PRODUCT CODE:
                          Patch Set 003                 T20AS4

This patch set provides the required files to update the KS-ARPA version
of the TOPS-20 monitor to edit level 1959 and the EXEC to level 638.

If you are patching the product for  the  first  time,  you  must  build
several  disk  areas and obtain some files from the TOPS-20 distribution
tape.  This process is described in the INSTAL.DOC file  in  the  second
save  set on this tape and in the Autopatch Procedures/Reference Manual.
The  T20AS4-XXX  Distribution  Dumper  Control  files   found   in   the
Installation Save Set may be used for this purpose.

A description of each edit is contained in the Edit Description file  in
Patch  Set  003  (T20AS4.D03).   Sample Patch & Build log files are also
provided.  You may want to compare your Build with this log file.

The files required from Patch Set 003 to patch this product are:

MONSYM.REL
MONSYM.UNV
PAT203.DPD
PROLOG.UNV
STG.MAC
T20SM4.R03
T20EX4.R03
VERSIO.MAC

You may use the T20AS4.P03 Patch Dumper Control file  to  restore  files
from  Patch  Set  003.   If  using  Autopatch for the first time on this
product you may use the T20AS4.A03 Patch Dumper Control file to  restore
files from all Patch Sets.