Trailing-Edge
-
PDP-10 Archives
-
BB-L014X-BM_1990
-
lngsrc/ddt.mac
There are 55 other files named ddt.mac in the archive. Click here to see a list.
SUBTTL DDT /TW/PFC/TWE/EJW/JNG/RDH/DIB/DLM/JBS/PTR/JM/RCB 18-Sep-89
COMMENT \
DDT -- "Dynamic Debugging Technique" for TOPS-10/TOPS-20
;COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1970,1980,1983,1984,1987,1988,1989.
;ALL RIGHTS RESERVED.
;
;
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
;ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
;INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
;COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
;OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
;TRANSFERRED.
;
;THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
;AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
;CORPORATION.
;
;DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
;SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
\
;DDT VERSION IDENTIFICATION
MAJVER==45 ;MAJOR VERSION LEVEL
MINVER==1 ;MINOR (MAINTENANCE RELEASE) LEVEL
CSTVER==0 ;CUSTOMER VERSION (WHO LAST . . .)
EDTVER==715 ;EDIT LEVEL
%%DDT==:<BYTE (3)CSTVER(9)MAJVER(6)MINVER(18)EDTVER>
IF2 <PURGE MAJVER,MINVER,CSTVER,EDTVER>
; TABLE OF CONTENTS FOR DDT
;
;
; SECTION PAGE
; 1. REVISION HISTORY.......................................... 5
; 2. DDT ASSEMBLY SWITCHES..................................... 10
; 3. TITLE AND VERSION SETTING................................. 11
; 4. OPDEFS, MACROS, ETC....................................... 12
; 5. DDT SYMBOLS............................................... 16
; 6. GLOBAL SYMBOLS FOR USE BY THE OUTSIDE WORLD............... 17
; 7. MEMORY ALLOCATION PARAMETERS.............................. 18
; 8. MISCELLANEOUS DDT SYMBOLS................................. 20
; 9. FILDDT
; 9.1 COMMAND SCANNER................................... 25
; 9.2 SETUP PAGE BUFFERS AND SYMBOLS.................... 53
; 10. START DDT................................................. 59
; 11. DDT COMMAND PARSER........................................ 60
; 12. COMMAND DISPATCH TABLE.................................... 65
; 13. COMMAND ROUTINES
; 13.1 CLASS 1........................................... 66
; 13.2 CLASS 2........................................... 84
; 13.3 CLASS 3........................................... 85
; 13.4 CLASS 4........................................... 86
; 13.5 CLASS 5........................................... 87
; 13.6 CLASS 6........................................... 89
; 13.7 REGISTER DEPOSIT AND OPEN......................... 89
; 13.8 RETYPE LAST QUANTITY.............................. 97
; 13.9 TYPEOUT MODE CONTROL.............................. 98
; 13.10 LIMITS AND PATCHING............................... 100
; 13.11 MEMORY AND PAGING CONTROL......................... 105
; 13.12 BREAKPOINT FACILITY............................... 111
; 13.13 EXECUTE AND SINGLE STEP........................... 118
; 13.14 PUNCH PAPER TAPE.................................. 144
; 13.15 SEARCHING......................................... 148
; 13.16 COMMAND FILE INPUT................................ 150
; 13.17 MISCELLANEOUS COMMANDS............................ 153
; 14. FILE SPECIFICATION PARSING AND ERROR ROUTINES............. 159
; SECTION PAGE
; 15. ENTER AND LEAVE DDT
; 15.1 SAVE.............................................. 169
; 15.2 RESTOR............................................ 174
; 15.3 SWAP.............................................. 176
; 15.4 BCOM.............................................. 177
; 16. WORD TYPEOUT AND FORMATTING ROUTINES...................... 180
; 17. OUTPUT SUBROUTINES........................................ 187
; 18. SYMBOL TABLE ROUTINES
; 18.1 CHECK POINTERS.................................... 192
; 18.2 CONVERT SYMBOL TO VALUE........................... 194
; 18.3 CONVERT VALUE TO SYMBOL........................... 196
; 18.4 HARDWARE OPCODE PROCESSING........................ 199
; 18.5 FIND PROGRAM NAME................................. 209
; 18.6 REMOVE AN UNDEFINED SYMBOL........................ 210
; 18.7 SYMSET, USYSET, AND ADVSYM........................ 211
; 19. MEMORY MANAGEMENT ROUTINES
; 19.1 FETCH............................................. 218
; 19.2 DEPOSIT........................................... 226
; 19.3 ADDRESS MAPPING................................... 238
; 19.4 PHYSICAL MEMORY................................... 243
; 19.5 FILDDT I/O........................................ 246
; 19.6 SYMBOL TABLE ACCESS............................... 252
; 19.7 ADDRESS CHECKING.................................. 259
; 19.8 MISCELLANEOUS..................................... 270
; 20. PRESERVATION ROUTINES..................................... 286
; 21. TELETYPE IO LOGIC
; 21.1 DEFINITIONS....................................... 288
; 21.2 INPUT ROUTINES.................................... 291
; 21.3 LINE BUFFERING ROUTINES........................... 295
; 21.4 UTILITY ROUTINES.................................. 312
; 21.5 OUTPUT SUBROUTINES................................ 319
; 21.6 SAVE/RESTORE...................................... 324
; 22. STORAGE
; 22.1 LITERALS AND END OF CODE.......................... 336
; 22.2 ALLOCATION MACROS................................. 337
; 22.3 MISCELLANEOUS..................................... 339
; 22.4 $X LOGIC AND PATCH COMMAND........................ 341
; 22.5 BREAKPOINTS....................................... 342
; 22.6 SYMBOL TABLE LOGIC................................ 344
; 22.7 ADDRESSING DATA................................... 346
; 22.8 SAVE AREAS FOR PREVIOUS CONTEXT................... 347
; 22.9 STATE VARIABLES................................... 349
; 22.10 FILDDT............................................ 350
; 22.11 PUSH DOWN LIST.................................... 353
SUBTTL REVISION HISTORY
;THE REVISION HISTORY STARTS SUDDENLY AT EDIT 200
;
; DDT %37(200) RDH 14-NOV-76
;200 RDH 14-NOV-76 SPR 10-17714
; VALIDITY-CHECK THE SYMBOL POINTER FOR THE HIGH-SEG SYMBOL
; TABLE (.JBHSM) RATHER THAN ARBITRARILY BELIEVING IT (AND
; SUBSEQUENTLY ILL MEM REF'ING, ETC.).
;201 RDH 14-NOV-76 SPR 10-18806
; MORE OF EDIT 200, AT DEF1:
;202 RDH 14-NOV-76 SPR 10-19661
; TREAT THE MAP INSTRUCTION "E" FIELD AS AN IMMEDIATE QUANTITY
; RATHER THAN AS A MEMORY REFERENCE.
;203 RDH 14-NOV-76
; EXPAND FILDDT TO HANDLE FULL 22-BIT ADDRESSING IN EXE-FORMAT
; FILES (SPECIFICALLY CRASH.EXE).
;204 RDH 14-NOV-76 SPR 10-20165
; IMPLEMENT SPECIAL BYTE-FORMAT TYPEOUT FOR THE VARIOUS
; BYTE MANIPULATION INSTRUCTIONS. CODE COURTESY OF THE
; UNIVERSITY OF ARIZONA.
;205 RDH 15-NOV-76
; PUT TAG PTDFLG: UNDER FTYANK RATHER THAN FTEXEC!FTFILE FOR
; THOSE SITES THAT WISH TO TAKE THEIR CHANCES WITH $Y IN EITHER
; UDDT OR VMDDT (NOTE: $Y USES I/O CHANNEL 17 - BE WARNED)
;206 RDH 4-DEC-76
; REWRITTEN CODE IN CHKADR (TO BETTER HANDLE KL'S) FORGOT HOW
; KA'S WORKED AND LOST THE APR PI ASSIGNMENT.
;207 RDH 4-DEC-76
; IMPLEMENT "/D" FOR FILDDT -- TREAT FILE SPECIFIED AS PURE
; DATA FILE - DON'T CRUMP ON FIRST 20 LOCATIONS (THE "ACS"),
; DON'T LOOK FOR SYMBOL TABLE. IF NOT .EXE FORMAT AND NOT .XPN
; FORMAT THEN "/D" IS ASSUMED.
;210 RDH 6-DEC-76
; EXTEND THE $M COMMAND -- <M>$<N>M -- WHERE <N> IS THE
; MASK NUMBER AND <M> IS THE ASSOCIATED MASK.
;
; <N> = 0 OR NOT-SPECIFIED THEN <M> IS THE SEARCH MASK
; <N> = 1 THEN <M> IS TTY CONTROL MASK:
; 1B35 = 1 THEN "ECHO" <DEL>'S AS <BS><SP><BS>
;211 RDH 6-DEC-76
; NEW ASSEMBLY PARAMETER "SKPMAX" TO SET MAXIMUM NUMBER OF
; LOCATIONS SKIPPED FOR $X LOGIC. IF <INSTR>$X THEN TYPE
; <SKP> FOR EACH LOCATION SKIPPED. IF $$X THEN DO INDEFINITE
; $X UNTIL OLD-PC .LT. NEW-PC .LE. OLD-PC+SKPMAX
;212 RDH 7-DEC-76
; MATCH ANGLE BRACKETTS -- <<
; WHEN PATCHING ($>) DON'T INSERT A 0 WORD UNLESS USER EXPLICITLY
; TYPED IT - I.E., ALLOW THE $> TO APPEAR BY ITSELF - THE WAY MOST
; PEOPLE TEND TO USE IT.
;213 RDH 9-DEC-76
; CHANGE SKIPN'S TO SKIPE'S IN [207] AND CAILE TO CAIL IN [210]
;214 RDH 18-DEC-76
; MATCH ANGLE BRACKETTS IN EDIT [212] COMMENTS TO KEEP VARIOUS
; AND SUNDRY PEOPLE HAPPY.
;215 RDH 19-DEC-76
; IF SPYSEG THEN NO HISEG SYMBOL TABLE.
;216 RDH 19-DEC-76
; CHKHSM ROUTINE ([200],[201]) IS TOO RESTRICTIVE, WON'T ALLOW
; .JBHSM TO POINT TO LOW SEG; CHKADR ROUTINE WON'T ALLOW RANDOM
; NON-CONTIGUOUS PAGES.
;217 RDH 19-DEC-76
; NAMSET ROUTINE (TO HANDLE MODULE$:) ASSUMES HIGH SEGMENT ALWAYS
; STARTS AT 400000, LEADING TO SUBSEQUENT ILL MEM REF'S.
;220 JNG 28-JAN-77
; PREVENT ILL MEM REF ON PATCH CLOSE WHEN USING A WRITE-LOCKED
; (E.G. HISEG) SYMBOL TABLE.
;DDT %40(220) MARCH, 1977
;221 TAH 13-MAR-77
; ADD COMMAND FRONT END TO INTERFACE FILDDT TO TOPS-20 SYSTEM.
; ADD KL PAGING CODE TO CVTADR, ALL UNDER FTFD20 CONDITIONAL
; (FTFILE MUST STILL BE ON ALSO).
;222 ASM 13-MAR-77
; IN EXEC DDT DETERMINE EXEC VIRTUAL ADDRESS OF EPT BY SCANNING
; EXEC VIRT ADR SPACE IF PAGING IS ON.
;223 TAH 13-MAR-77
; MAKE LPDL LARGER FOR TOPS-20 MDDT
;224 RDH 13-MAR-77
; MAKE SEARCHES HANDLE NON-CONTIGUOUS CORE/FILE IMAGES, ADD
; TWO NEW ASSEMBLY PARAMETERS:
;
; INDPTH ;MAX INDIRECT NESTING FOR $E SEARCHES
; LISCNT ;NUM OF <PUSHJ P,LISTEN>'S TWEEN INCHRS'S
;225 RDH 13-MAR-77
; HANDLE TYPEOUT RADIX .GE. 10 (E.G., HEX) MORE GRACEFULLY
;226 RDH 13-MAR-77
; EDIT 215 IS WRONG, .GTSGN == 14
;227 JNG 13-MAR-77
; ADD CODE TO DDT TO WRITE-ENABLE PAGES ON TOPS-20 BEFORE
; ATTEMPTING TO WRITE THEM - E.G., FOR BREAKPOINTS, PATCHS,
; AND SO FORTH. IF PAGE NOT WRITE-ENABLED, SET COPY-ON-WRITE
; SO AS NOT TO ZAP OTHER USERS "SHARING" THE PAGE.
;230 RDH 13-MAR-77
; WHEN IN A COMMAND FILE ($Y) THEN DO NOT CHECK THE COMMAND
; FILE FOR INPUT ON CALLS TO LISTEN - ONLY ACCEPT PHYSICAL
; TTY INPUT.
;231 RDH 14-MAR-77
; CLEAR $U POINTERS IN FILDDT ON ^Z, START SEQUENCE
;232 RDH 14-MAR-77
; UPDATE LH(.JBSA) ON PATCH END IF .JBFF WAS DEFAULTED TO
; ON PATCH BEGIN. THIS WAY THE PATCH IS AT LEAST SAVED ON
; SAVE'S, RESET'S, AD NAUSEUM.
;233 RDH 14-MAR-77
; REVAMP PATCH LOGIC ($< AND $>) TO DISPLAY LOCATION BEFORE
; MODIFYING SAME LOCATION SO THAT FILDDT CAN PATCH RUNNING
; MONITOR (ALSO LOOKS NEATER).
;234 RDH 23-MAR-77
; ADD NEW "MASK" COMMAND <N>$2M TO SET THE SYMBOL OFFSET RANGE
; (I.E. THE RANGE IN WHICH VALUES WILL BE TYPED IN THE FORM
; SYMBOL+<OFFSET>) TO <N>. ADD ASSEMBLY PARAMETER "ADRNGE"
; AS THE DEFAULT VALUE. ALSO MAKE $1M/ ETC. WORK.
;235 RDH 24-MAR-77
; REVAMP BYTE TYPEOUT LOGIC: ADD <N>$3M AS BYTE TYPEOUT MASK
; (EACH "1" BIT IN THE MASK MARKS THE END OF A BYTE, BIT 35
; IS ALWAYS CONSIDERED THE END OF A BYTE). FOR VALUES OF <N>
; SUCH THAT 1 .LE. <N> .LE. 36(10) THE COMMANDS $<N>O & $$<N>O
; WORK AS USUAL BY SETTING AN INTERNAL BYTE MASK. FOR <N> = 0
; THE $3M BYTE MASK WILL BE USED. FOR <N> = <NULL> (I.E. THE
; $O COMMAND) THE CURRENTLY PREVAILING $O OR $$O MASK WILL
; BE USED IF NON-BLANK, ELSE THE $3M MASK WILL BE USED.
; $$O MAKES PERMANENT THE CURRENTLY PREVAILING $O (OR $$O)
; BYTE MASK.
;236 RDH 14-APR-77
; ADD IFN FTYANK CONDITIONALS SO THAT FILDDT CAN BE ASSEMBLED
; WITH FTYANK TURNED OFF.
;237 RDH 17-APR-77
; GENERAL CLEANUP AND REARRANGEMENT. MAKE TOPS-10 DDT SEARCH
; THE "C" UNIVERSAL FILE. TYPE OUT "DDT" WHEN USER MODE DDT
; IS ENTERED. PUT TOPS-10-SPECIFIC CODE UNDER "IFN FTDEC10"
; RATHER THAN "IFE FTDEC20".
;240 RDH 15-JUN-77
; ADD CODE TO TYPE OUT SYMBOLIC WORDS WITH USER-DEFINED SYMBOLS
; SUCH AS THE CALLI OR JSYS MNEMONICS. ORDER OF SEARCH IS:
; 1) OPCODE & AC & I & X & Y FIELDS
; 2) OPCODE & I & X & Y FIELDS (E.G. CALLI OR JSYS)
; 3) OPCODE & AC FIELDS (E.G. TTCALLS)
; 4) OPCODE ONLY
; 5) HARDWARE-KNOWN OPCODE (JRST, ETC.)
; PUT CODE UNDER FTOPX .NE. 0 CONDITIONAL SINCE UNTIL SORTED
; SYMBOL TABLES AVAILABLE THIS CODE TAKES MUCH RUN TIME.
; ALSO MAKE TRXX AND TLXX TYPE OUT ADDRESS AS OCTAL RATHER
; THAN SYMBOL+OFFSET.
;241 RDH 15-SEP-77 SPR # 10-22011
; "777777" COULD GET TYPED OUT AS "-1" WHEN $X'ING IF THE
; AC BEING TYPED OUT WAS TYPED OUT IN XWD FORMAT.
;242 RDH 16-SEP-77 SPR # 10-22616
; "AOS UND#(AC)" LOST BOTH THE UND SYMBOL AND THE AC IN
; THE WORD BEING BUILT (I.E., LEFT ONLY THE AOS).
;243 RDH 16-SEP-77 SPR # 10-22788
; PATCHING WITH FILDDT WRONG IF NONE OF THE USUAL PATCHING
; SYMBOLS (PAT.., PAT, PATCH) ARE PRESENT AND THUS PATCHING
; DEFAULTS TO C(.JBFF) - THE .JBFF USED WAS FILDDT'S, NOT
; THE FILE'S.
;244 RDH 16-SEP-77 SPR # 10-22894
; SOME RUBOUT'S STILL GET TYPED OUT.
;245 RDH 17-SEP-77 SPR # 10-23013
; AFTER REFERENCING AN UNDEFINED SYMBOL, THE UNDEFINED SYMBOL
; IS LEFT IN THE SYMBOL CACHE WITH ITS BOGUS VALUE (E.G., THE
; ADDRESS TO FIX UP).
;246 RDH 25-SEP-77
; BE MORE CHOOSEY ABOUT TYPE-IN INVOLVING UNDEFINEDS - CATCH ERRORS
; SUCH AS "PUSHJ UND#,FOO" OR "MOVE 4,(UND#)"
;247 RDH/JNG 16-OCT-77 TO 28-JUN-78
; MASSIVE DEVELOPMENT AND REVAMPING: EXTENDED ADDRESSING; JSYSIZE FILDDT;
; REMOVE SYMBOL CACHE; ADD $0W AND $1W; DISK SUPER I/O (FILDDT);
; PHYSICAL MEMORY ADDRESSING; KS-10 SUPPORT; KI/KL PAGING SUPPORT;
; $Z; $8T AND $9T; $.; $U ENHANCEMENTS; $B ENHANCEMENTS; $X EN-
; HANCEMENTS; DECOMMIT EXEC PAPER TAPE STUFF; SYMBOLIC TYPEOUT
; ENHANCEMENTS; $Y ENHANCEMENTS (TOPS-10 ONLY); NUMEROUS RANDOM
; BUG FIXES. CALL VERSION 41.
;250 JNG 15-AUG-78
; SEARCH UUOSYM, MACTEN INSTEAD OF C.
;DDT %40A(250) OCTOBER, 1978
;251 JNG/RDH 15-AUG-78 TO 26-JAN-79
; CONTINUING AND FIXING BUGS IN 247: IMPLEMENT HISEG SYMBOL TABLES
; IN FILDDT; ALLOW THE SYMBOL TABLE TO BE IN ANOTHER ADDRESS SPACE
; FOR EDDT AND MDDT; ADD $: WITH NO ARGUMENT; ADD "M" ERROR.
;252 JNG 4-FEB-79
; CHANGE HIDDEN SYMBOL LOGIC TO DO EXEC VIRTUAL BLT'S INSTEAD
; OF SWITCHING THE EPT BASE ADDRESS.
;253 DIB 8-MAR-79
; INSERT A NEW SYMBOL TABLE CACHE FOR OUTPUT ONLY. ALSO MOVE
; DATA PAGES BELOW CODE PAGES SO SYMBOL CACHE WILL FIT IN UDDT.
;254 JNG/RDH 8-MAR-79
; GET FAKEAC LOGIC RIGHT IN $U COMMANDS. BROKEN BY 251. ONLY
; SETUP .JBVER IF FILDDT. ADD /A (ABORT ON COMMAND ERROR) FOR
; $Y. MAKE ^W WORK MORE REASONABLY ON -10. MAKE FANCY RUBOUT
; HANDLING AUTOMATIC ON -10 (7.01 ONLY). ADD $$. AS PREVIOUS
; $. (USEFUL FOR $$.<$$X ETC.).
; (MATCH ANGLE BRACKETS:>)
;255 RDH 31-MAR-79
; LOST INSTRUCTION IN EDDT FOR KI-10'S. SUPPRESS ADDRESS BREAKS
; IN FETCH AND STORE LOGIC. IF $$X'ING (OR $W'ING (SEARCHING)
; OR $Z'ING (DEPOSITING)) AND USER TYPES A ? THEN GIVE A QUICKIE
; TYPEOUT STATUS. SECOND FIELD TEST FOR TOPS-10 7.00.
;256 RDH 17-APR-79
; RANDOM VERSION 41 BUGS (IN PARTICULAR $P OF A BREAKPOINT CAUSED
; BY XCT'ING A BREAKPOINT LOCATION FAILED). HANDLE ERCAL/JMP ON
; $P. HANDLE INIT UUO.
;257 JNG 21-APR-79
; CONVERT $U COMMAND TO FUNCTION CODES.
;260 RDH 13-MAY-79
; ADD ADR$V COMMAND TO "WATCH" A LOCATION AND REPORT ANY CHANGE IN
; ITS CONTENTS (ADR DEFAULTS TO LAST LOCATION OPENED).
;261 RDH 22-MAY-79
; STUPID LITTLE BUGS.
;262 RDH 8-JUL-79
; XJRSTF AND FRIENDS WANT ALL 36 BITS OF PC FLAGS, NOT JUST THE
; LEFT-MOST 18 BITS. $I+3 IS 36-BIT PC FLAGS, $I+4 IS 36-BIT PC.
;263 RDH 16-JUL-79
; MORE STUPID LITTLE BUGGIES. IN PARTICULAR, N$P BROKE.
;264 DZN 25-OCT-79
; REPLACE SUB IN LOOKDN WITH EQUIVALENT CODE THAT DOESN'T OVERFLOW.
;265 DZN 6-NOV-79
; REMOVE MULTIPLY-DEFINED GLOBALS $nB, $I, $M WHEN KDDT AND MDDT ARE
; LOADED TOGETHER.
;DDT %41(265) RELEASED MAY, 1980
;VERSION 41A BEGINS
;266 DIB 18-FEB-80
; ADD RP20 SUPPORT TO FILDDT.
;267 BPK 11-APR-80
; REPLACE SUB IN LOOK10 WITH EQUIVALENT CODE THAT DOESN'T OVERFLOW.
;270 BPK 17-APR-80
; TURN OFF CTRL-O WHENEVER WE STOP AT A BREAKPOINT.
;271 DLM 4-OCT-79
; FLAG IN TTYMSK FOR INST TYPEOUT ON BPT; WARNING IF BPT INSERTION/REMOVAL
; FAILS; DIAGNOSTICS ON MEM REF FAILURE; RUN IN NON-0 SEC IF POSSIBLE.
;272 JBS 9-NOV-80 SPR 10-30155
; ADD ^E TEXT TO -10 HELP MESSAGE.
;273 JBS 10-NOV-80 SPR 10-30019
; FIX OVERFLOW IN ADD INSTR. AT L4+18.
;274 JBS 12-NOV-80 SPR 10-30058
; FIX SUB AT DOITX0 THAT SET CARRY1 AND CARRY0 IN USER CONTEXT.
;275 JBS 14-NOV-80
; FIX ERJMP/ERCAL $X ROUTINES TO AGREE WITH EDIT 274.
;276 JBS 17-NOV-80 SPR 10-30156
; MOVE "PUSH" OUT OF CONDITIONALS TO AGREE WITH "POP" IN RDBIN.
;277 JBS 18-NOV-80 SPR 20-15067
; FIX $<RET> AFTER $<TAB>.
;300 JBS 19-NOV-80 SPR 10-30237
; ADD USER TTY CONTROL BIT FOR $Y ECHO DURING FILE READ/EXECUTION.
;301 JBS 25-NOV-80
; ALL KINDS OF MISC. EDITS TO FIX LITTLE THINGS HERE AND THERE.
;302 JBS 3-DEC-80 SPR 10-30277
; FIX MOVING OF PAT.. IN $< MODE.
;303 JBS 4-DEC-80
; MAKE $Z ABORT WITH "?" IF ANY MEM. WRITE FAILS, REMOVE $$Z,
; MOVE /H TEXT AROUND FOR -10 VERSION, FIX EXTENDED ADDRESSING BUG.
;304 JBS 10-DEC-80 SPR 10-30337
; FIX ILDB TYPEOUT IN EXTENDED ADDRESSING MODE - WAS MESSING UP SECTION #
; WHEN AN AC WAS USED.
;305 JBS 29-DEC-80
; REMOVE TEMPORARY PATCH THAT BYPASSED MACRO BUG, REVISE EDIT 300.
;306 JBS 29-DEC-80 SPR 10-30404
; ADD $$1X FEATURE TO DO QUICKER $$X BY NOT CHECKING FOR DANGEROUS
; INSTRUCTIONS. USED OVER LONG BUT SAFE PUSHJ'S, ETC.
;307 JBS/RDH 30-JAN-81
; SETUP LOCATION .JBBPT WITH $0BPT FOR TOPS-10 USER/EXEC DDT'S,
; CHANGE FLOATING OUTPUT SUBROUTINE "TFLOT" TO USE "FLOUT" JSYS ON
; TOPS-20, ADD $2F DOUBLE-PRECISION FLOATING TYPEOUT ON TOPS-20,
; ALLOW READING $M AND $U MASKS IN FILDDT (SPECIAL-CASE THEM),
; REMOVE $L PAPER TAPE PUNCH CODE, ADD $[ANY DIGIT] COMMAND TO
; ABORT PATCH INSERT MODE, MAKE $[ANY DIGIT]< ILLEGAL,
; CLEAR "PATCH MODE" FLAG AND RESET LOCATION POINTERS AT START-UP,
; DON'T ALLOW NESTED PATCHING, CHANGE <LF> AND ^H TO RECOGNIZE
; DOUBLE-WORD MODE ON TOPS20 (I.E., DOUBLE PRECISION FLOATING TYPEOUT),
; CHANGE $X CODE TO CLEAR INPUT BUFFER AND RESET ^O BEFORE NEXT
; INSTRUCTION TYPEOUT.
; (MATCH ANGLE BRACKETS IN [302] >)
;310 JBS 22-JAN-81 SPR 20-15518
; CHANGE HANDLING OF TEXT INSERTION - AUTOMATICALLY CLOSE LOCATION
; UPON RECEIPT OF TEXT DELIMITER.
;311 JBS 6-FEB-81
; REDEFINE PATCH ABORT COMMAND TO $0>, FIX BREAKPOINT TYPEAHEAD
; CLEARING BUG - WAS MUNCHING FIRST CHR. TYPED AFTER BREAKPOINT
; STUFF BEGAN TYPING OUT, FIX FILDDT BUG WHICH WOULD SETUP PAGTBL
; WRONG (SOMETIMES) FOR PAGES OVER 4000, CHANGE TEXT INSERTION MODE
; SO IT WON'T FORCE A CRLF IF A LOCATION IS OPEN BUT NOTHING HAS
; BEEN DEPOSITED YET (REVISION OF EDIT 310), REINSTALL EDIT 273
; WITH A CHANGE (EDIT 303 REMOVED EDIT 273).
;312 RDH/JBS 4-MAR-81
; (<<MATCH ANGLE BRACKETS)
; FIX BROKEN NEGATIVE INTEGER TYPEOUT, FIX TOPS-10 OUTPUT BROKEN BY
; EDIT 305, MAKE $7T MODE DO RIGHT-JUSTIFIED TYPEOUT ONLY IF LEFT 29
; BITS ARE ALL NULL, CHANGE PATCH ABORT (AGAIN) TO $$0>, MAKE A BOTCHED
; PATCH-INSERT FIX PTLOC BEFORE LOSING, MAKE $N> SET MAXIMUM SKIP
; RETURNS FROM PATCH (N=1 GIVES 1 JUMPA, ETC.), FIX BUG THAT WOULD SET
; "." TO ZERO AFTER ^C/DDT COMMANDS, ADD $0T/$$0T COMMAND TO TYPE THE
; ASCIZ STRING STARTING AT ".", MAKE XMOVEI TYPE OUT AC CONTENTS AFTER
; $X.
;313 JBS 10-APR-81
; EDITS 302 AND 312 MUST BE INSTALLED FIRST -
; ADD <ADDR.>$0T TO TYPE ASCIZ STRING AT <ADDR.>, CHANGE $0T CODE TO
; BE MORE EFFICIENT, ALLOW USER TO STOP $0T TYPEOUT ANYTIME, MORE WORK
; TO GET $T TO WORK RIGHT FOR RIGHT-JUSTIFIED SINGLE CHR., HANDLE RPACS%
; ERROR IF SECTION DOESN'T EXIST, MAKE FILDDT STOP SEARCHING AFTER EOF
; ON DATA FILES, FIX MOVING OF PAT.. WHEN AN UNDEFINED SYMBOL EXISTS
; AND A NEW DEFINITION IS MADE (CACHE PROBLEM), MAKE CONDITIONAL
; BREAKPOINT INSTRUCTION EXECUTE IN USER CONTEXT, DON'T FORCE $P
; DEFAULT TO 1 IF USER HAS SPECIFIED OWN NUMBER.
;314 JBS 10-AUG-81
; REMOVE AUTO CRLF AFTER LONG STRING INSERTION, FIX ANOTHER BUG WITH
; UNDEFINED SYMBOLS NOT GETTING FIXED UP.
;315 JBS 13-AUG-81 SPR 10-31459
; OUTPUT RADIX WASN'T SETUP BEFORE TYPING FILOP. ERROR CODE, CAUSING
; GARBAGE TO PRINT OUT. FILDDT-10 ONLY.
;316 JBS 17-AUG-81
; FIND "REAL" EOF FOR A TOPS-20 FILE - EDIT 313 BROKE THIS BECAUSE IT
; ASSUMED SIZEF% RETURNED EOF. BUT EOF DOESN'T REALLY EXIST IN TOPS-20!
;317 JBS/RDH 19-AUG-81
; [JBS] FIX FILDDT FOR BIG DATA FILES AGAIN.
; [RDH] HANDLE ^S/^Q IN EXEC MODE, IMPLEMENT EXEC MODE TYPEAHEAD,
; IMPLEMENT XXX<ADR>N$B WHERE "ADR" IS ADDRESS OF COMMAND STRING TO
; BE EXECUTED ON BREAKPOINT (DEPENDS ON FTYANK), HANDLE $X'ING IN
; THE ACS IN NON-ZERO SECTION (PC ALWAYS LOCAL, THEREFORE ALWAYS
; A "REGISTER" ADDRESS)
;THIS SOURCE FILE IS MADE FROM FIELD-IMAGE DDT 42(320), AS RELEASED WITH
;TOPS-20 V5. IT INCLUDES SOME PUBLISHED AND UNPUBLISHED EDITS MADE TO DDT
;41A.
;320 RDH/JBS 30-SEP-81
; EDIT 317 BROKE TYPING SOMETHING TO GET OUT OF A (E.G.) SEARCH LOOP
; (EXEC MODE ONLY), PRESERVE APR BITS IN EXEC MODE, TYPE "/" INSTEAD OF A
; SPACE IN $0T COMMAND. NOTE: THIS EDIT IS NOT IN 42(320).
;321 JBS 30-SEP-81 10-31641
; REMOVE DEFINITION OF RADIX50 PAT FROM LIST OF PATCH LOCATIONS IN
; USER MODE.
;322 JBS 6-OCT-81
; PHYSICALLY REMOVE DESUPPORTED $L CODE.
;323 ALREADY INSTALLED IN 42(320).
;324 JBS 27-JAN-82
; FIX TYPO IN EDIT 317 THAT CAUSED EDDT-10 TO HANG ON STARTUP.
;DDT %41A(324) RELEASED FEB, 1982
;%42(320) RELEASED ON TOPS-20 VERSION 5 SYSTEMS SUMMER 1982.
;325 RDH/JBS 3-FEB-82
; FIX PUSH/POPJ MISMATCH THAT HAPPENS IF NO SPT SETUP IN KL-PAGING.
;326 JBS/RDH 19-MAR-82
; CHANGE CONDITIONAL BREAKPOINT CODE TO COMPLETELY RESTORE THE WORLD
; BEFORE EXECUTING (IN CASE OF CONSZ PI, ETC. IN EXEC MODE).
;327 JBS 12-MAY-82 20-17648
; TYPE SYMBOL IN OPEN MODULE IN PREFERENCE TO A GLOBAL, IF THEY BOTH HAVE
; THE SAME VALUE.
;330 NOT INSTALLED.
;331 JBS/RDH 17-DEC-82 20-17727
; REWORK $X CODE TO MINIMIZE PROBLEMS WITH PSI SWITCHING. USER WOULD
; GET PSI TRAPS WITH DDT'S ACS SET UP, OR NOT GET PSI AT ALL. THIS DOES
; NOT ELIMINATE THE PROBLEM COMPLETELY (CAN'T BE DONE ANYWAY), IT JUST
; HELPS IT A LOT.
;332 JBS 1-SEP-82 10-32308
; MAKE RDIO NOT CRASH THE SYSTEM WHEN $X'ED ON A KS. FIXED ON TOPS-10
; AND EDDT-20; S/UDDT DON'T HAVE ENOUGH ROOM LEFT TO BE FIXED.
;333 DLM/RDH 25-DEC-82
; NOTE: THIS EDIT IS NOT INSTALLED. IT IS ONLY FOR FURTHER DOCUMENTATION
; OF 42(320) AS RELEASED.
; CREATE SECTIONS AS NEEDED FOR TOPS-20 USER-MODE DDTS; DEFAULT
; THE SECTION IN ADDRESS EXPRESSION IF ADDRESS IS .LT. 18 BITS, OR
; IF SPACE OR COMMA TYPED, BUT NEVER IF COMMA-COMMA TYPED; IMPLEMENT
; "INTERNAL" ADDRESSES (E.G., FOR $M, $I, ETC.) - MAKE $NI, $NM, AND
; $NU CONSISTENT (ALLOW SETTING AS WELL AS READING OF ALL).
;334 JBS 31-JAN-83 10-33035, 10-33811
; TYPE I/O INSTRUCTIONS CORRECTLY.
;335 NOT INSTALLED.
;336 JBS 25-MAR-83
; FIX ERROR MESSAGE TYPEOUT AT REMOER.
;337 JBS 2-FEB-83
; FIX INEFFICIENT CODE AFTER SYMBOL TABLE CACHE FEATURE TEST WAS ADDED.
;< (match angle brackets)
;340 JBS 2-FEB-83
; REMOVE $$0> AS PATCH ABORT COMMAND. LEAVE $0< AS THE COMMAND.
;> (more matching anglies)
;341 NOT INSTALLED.
;342 JBS 16-FEB-83
; FIX $G TO USE 30 BIT START ADDRESSES ON TOPS-20.
;343 JBS 25-FEB-83
; REMOVE EXEC-MODE ONLY CODE FROM USER DDTS. EDIT 331 MUST BE INSTALLED
; FIRST.
;344 JBS 14-MAR-83
; DON'T DIE IF USER GIVES BAD FORK NUMBER IN FORK<$$?.
;(MATCH ANGLE BRACKETS:>)
;345 JBS 4-APR-83
; MOVE SOME CODE TO PAGES 764 AND 765 IN UDDT-20 TO GET CODE SPACE.
;346 JBS 4-APR-83
; FIX EDIT 343 SO TOPS-10 USER MODE WORKS. EDIT 343 MUST BE INSTALLED.
;347 JBS 6-APR-83
; EXPAND EDIT 332 TO WORK IN UDDT-20 AND SDDT-20 ON THE KS. EDIT 345
; MADE ENOUGH ROOM TO INSTALL THIS BUG FIX.
;350 JBS 8-APR-83
; FIX EXEC TYPEAHEAD CHECK AT LOOK2 + A FEW.
;351 JBS 8-APR-83
; REMOVE DEFINITION OF MRPAC% JSYS FROM SOURCE.
;352 JBS 8-APR-83 20-19074
; FIX $W IN FILDDT-20.
;353 JBS 6-MAY-83
; FIX $? COMMAND TO NOT TYPE GARBAGE STRINGS.
;354 JBS 9-MAY-83
; REMOVE $$? COMMAND FROM FILDDT-20.
;355 JBS 8-JUL-83
; MOVE SAVE4 LABEL SO EXEC DDT'S START. FIX TO EDIT 331 AND 332.
;356 NOT INSTALLED.
;357 JBS 26-JUL-83
; FIX $W FOR DISKS - PAGE ACCESS BITS WERE NOT UPDATED.
;360 JBS 28-JUL-83
; DO MONITOR FIXUPS RIGHT - PEEK JUST BEFORE POKE.'ING.
;361 RDH 15-NOV-83
; KEEP THE LAWYERS HAPPY - PUT COPYRIGHT IN THE BINARIES
;362 PTR 20-DEC-83 20-17198
; FIX NON-ZERO SECTION $X OF XMOVEI, XHLLI, LDB ET AL. BY
; REMEMBERING THE LOCAL/GLOBAL PART OF THE EA CALC.
; MAKE A NEW ENTRY IN $XTBL FOR XHLLI, SO SECTION NO. IS PRINTED.
; ADD CODE TO TBPNT TO DECODE ALL FORMS OF BYTE POINTERS.
; FIX EA CALC OF BYTE POINTERS AT IXBP; HANDLE ALL THE FORMATS.
;DDT %42A(362) SHIPPED WITH TOPS-10 7.02
;363 JBS 1-FEB-84 RAW
; MAKE PSECT XCODE READ-ONLY.
;364 PTR 7-FEB-84 10-34464
; WRTWIN THOUGHT THE REFERENCED ADDRESS WAS ALWAYS IN R; IT ISN'T.
; USE THE FILE PAGE NUMBER INSTEAD.
;365 RDH 21-FEB-84
; ONLY GIVE HARDWARE 8 BITS OF CHAR IN EXEC MODE.
;366 PTR 21-FEB-84
; DON'T CONFUSE FLOAT INPUT AND SYMBOLS STARTING WITH ".E" SO MUCH
;367 JM 21-JUN-84
; FIX $O TYPEOUT MODE (N-BIT BYTES) SO THAT ADDRESSES ARE RENDERED
; SYMBOLICALLY RATHER THAN ABSOLUTELY.
;370 JM 30-AUG-84 10-34852
; MOVE TYPEOUT MODE SAVE FROM DD2: TO AFTER LIS1:
;371 JM 2-OCT-84
; CAUSE RUBOUT OF TEMPORARY TYPEOUT MODE TO WORK AGAIN (BROKEN BY
; EDIT 370).
;372 JM 21-NOV-84
; FIX SINGLESTEP OF XPCW: RESTORE CORRECT CONTEXT; DON'T OVERWRITE
; SAVED FLAGS WITH SAVED PC.
;373 PTR 6-DEC-84
; NOT INSTALLED, EQUIVALENT TO EDIT 621.
;374 PTR 6-DEC-84
; ALREADY INSTALLED AS EDIT 601.
;375 PTR 6-DEC-84
; NOT INSTALLED, EQUIVALENT TO EDIT 622.
;376 PTR 6-DEC-84
; NOT INSTALLED (PARTLY INSTALLED AS EDIT 422).
;377 PTR 6-DEC-84
; ALLOW < > AS PATH DELIMITERS AS WELL AS [ ] IN TOPS-10 FILESPECS.
; MINOR BUG IN <LF> RE TYPEOUT MODE FLAG.
;EDIT NUMBERS THRU 417 RESERVED FOR DDT V42 SPR'S.
;DDT V43 DEVELOPMENT BEGINS AT EDIT 420.
;420 PTR 9-JAN-84
; CREATE THIS SOURCE FILE FROM DDT V42(362). CLEAN UP COMMENTS,
; MAKE CODE FORMAT CONSISTENT AS POSSIBLE. NO CODE CHANGES.
;421 PTR 9-JAN-84
; SUPPORT INTER-SECTION BREAKPOINTS. IMPLEMENT $4M.
;422 PTR 18-JAN-84
; ADD SUPPORT FOR $X OF XJRST INSTRUCTION. FIX IO INSTRUCTION
; RESULTS TYPEOUT.
;423 PTR 19-JAN-84
; NOT INSTALLED.
;424 PTR 19-JAN-84
; REVISE INSTRUCTION TYPEOUT CODE TO ALLOW FOR SYMBOLS WITH
; NON-ZERO LEFT HALVES.
;425 PTR 20-JAN-84
; FIX $X OF STACK INSTRUCTIONS TO WORK WITH LOCAL STACK POINTERS
; IN NON-DDT SECTIONS.
;426 PTR 23-JAN-84
; ALWAYS INSERT/REMOVE BREAKPOINTS AROUND INSTRUCTIONS. JSYS CAN
; CAUSE RANDOM DISPATCHES, INTERRUPT OR ARITH OVL MAY OCCUR;
; MAKE SURE DDT HAS A CHANCE OF RECOVERING.
;427 PTR 24-JAN-84
; REDO SAVEG: A BIT. MOVE SOME EXEC MODE TYPEAHEAD CHECKS.
;430 PTR 24-JAN-84
; INSTALL DLM'S SYMBOL TABLE CHANGES VERBATIM -- WILL CHANGE TO
; MEET SPEC LATER. INCLUDES MDDT STUFF; RIP OUT WINDOWING CODE.
; NO MORE "HIDDEN" SYMBOLS ON -20.
;431 PTR 25-JAN-84
; ADD STACK/ARITH TRAP-CAUSING INSTRUCTIONS TO DANGEROUS OPCODE
; TABLE; FIX [426] TO INSERT/REMOVE BPTS ONLY FOR DANGEROUS
; INSTRUCTIONS. REORGANIZE DANGEROUS OPCODE TABLE DEFINITION.
;432 PTR 26-JAN-84
; FIX UP SYTSEC TO ASSUME -1,,N FORMAT. IF WORD IS 0, DEFAULT
; TO SECDDT. CLEAR CACHE IF STUFFING NEW SYMBOL POINTERS (SYMCHK).
;433 PTR 30-JAN-84
; MAKE FILDDT ASSEMBLE AGAIN. CNTRLZ/CNTRLE WERE TOO BIG FOR COMMAND
; DISPATCH TABLE.
;434 PTR 3-FEB-84
; KEEP SYMCHK FROM SWITCHING SYMBOL TABLES IN MDDT/KDDT.
; NEVER LOOK OUTSIDE SECTION 0 FOR SYMBOL TABLES IF RUNNING IN ZERO.
;435 PTR 3-FEB-84
; FIX [430] TO USE IFIW WHEN ZEROING "@SYMP".
; CHANGE MAP AC,(R) AND SKIP (R) TO USE @R (SO SEC. 0 REFS FROM
; NON-ZERO WILL WORK).
;436 PTR 6-FEB-84
; FIX [430] SO DOESN'T REFERENCE .EDSEC ON -10.
;437 PTR 6-FEB-84
; SPECIAL MDDT BREAKPOINT INTERLOCK; ONLY ONE FORK CAN SET BREAKPOINTS
; AT A TIME. SET DEFAULT MDDT/KDDT BREAKPOINT BLOCKS.
; CHANGE MDDT/KDDT PSECT NAMES.
;440 PTR 15-FEB-84
; MAKE <FOO>$X DO THE INSTRUCTION IN USER'S SECTION, NOT DDT'S SECTION.
; FIX CNTRLZ NOT TO USE $X CODE.
;441 PTR 15-FEB-84
; MAKE $V DEFAULT SECTION IF NONE TYPED.
;442 PTR 16-FEB-84
; FIX HANDLING OF SYTSEC SO SDDT STILL WORKS.
; MAKE HISEG S.T. CHECKS DO LOCAL FETCHES.
;443 PTR 23-FEB-84
; DEFAULT BPBLK TO LAST N WORDS IN SECTION. MAKE SURE IT HAS ROOM
; FOR $X NEEDS.
;444 PTR 24-FEB-84
; FIX SYTSEC HANDLING SOME MORE SO S.T. STUFFING (INCL SDDT) WORKS IN
; NON-ZERO SECTIONS.
;445 PTR 27-FEB-84
; MAKE MDDT STACK POINTER GLOBAL. OTHERS SHOULD STILL BE LOCAL.
;446 PTR 27-FEB-84
; DON'T DIDDLE PSI STATUS IN MDDT. STACK NOT SET UP AT THAT POINT ANYWAY.
;447 PTR 27-FEB-84
; IN <INSTR>$X, DON'T INSERT BREAKPOINTS UNLESS WE'RE REALLY GOING
; TO EXECUTE THE INSTRUCTION.
;450 PTR 27-FEB-84
; TURN SOME RAW NUMBERS INTO SYMBOLS IN KL PAGING STUFF.
; FIX EXEC MODE $W, INCLUDE CST WRITE BIT.
;451 PTR 27-FEB-84
; IMPLEMENT "PERMANENT DEFAULT SECTION," $6M. IF SET, USE IT INSTEAD
; OF LLOCS IN DEFSEC. REWRITE DEFSEC TO INCLUDE NEW ROUTINE GDFSEC
; (GET DEFAULT SECTION).
;452 PTR 28-FEB-84
; WHEN A LOCAL AND GLOBAL HAVE THE SAME VALUE, CONSISTENTLY PICK
; THE GLOBAL FOR TYPEOUT. IMPROVEMENT ON [327].
;453 PTR 28-FEB-84
; FIX PROBLEM WITH OKAF. CLEAR IT IN MORE PLACES, SO # APPEARS
; AFTER LOCALS CONSISTENTLY.
;454 PTR 2-MAR-84
; FIX PROBLEM WITH [447]. INSTR$X COULD DIE IF BREAKPOINTS SET.
;455 PTR 5-MAR-84
; IN KDDT USER MODE, JUMP INTO MONITOR ON ^Z SO IT CAN PLAY MAPPING
; GAMES. THIS IS SO "@GET SYSTEM:MONITR @START 140" WILL WORK.
;456 PTR 21-MAR-84
; OPDEF SOME OPCODES SO THAT DECREPIT VERSIONS OF MACRO CAN STILL
; ASSEMBLE DDT.
;457 PTR 22-MAR-84
; FIX SYMCHK NOT TO STEP ON FILDDT'S SYMBOL POINTERS. FOR NOW
; FILDDT WILL IGNORE $5M.
;460 PTR 30-MAR-84
; MAKE $X OF PC-SECTION-REF INSTRUCTIONS (BYTE, EXTEND, BLT, JSYS)
; EXECUTE IN ORIGINAL PC SECTION.
;461 PTR 18-APR-84
; MASSIVE EDIT TO RECOGNIZE PDV'S AND THEIR SYMBOL VECTORS.
; THE IOWD IS HEREBY DEFUNCT. SYMBOL TABLE POINTERS ARE NOW KEPT
; INTERNALLY AS TWO-WORD ADDRESS/LENGTH PAIRS. SYMP AND FRIENDS ARE
; NOW BLOCKS OF SYMBOL TABLE INFORMATION. THIS CHANGES HOW SYMBOL
; TABLES ARE HANDLED ALL OVER DDT. IN PARTICULAR, SYMFIX, SYMCHK
; AND CLSFIL HAVE BASICALLY BEEN REWRITTEN. ALL OTHER PLACES THAT
; TOUCH SYMBOL TABLE POINTERS HAVE BEEN CHANGED TO ACCOUNT FOR THE
; NEW FORMAT. NOTE THIS EDIT NEVER REFLECTS CHANGES TO SYMBOL TABLE
; POINTERS IN THE USER'S ORIGINAL COPY (EXCEPT FILDDT).
;462 PTR 18-APR-84
; PROHIBIT PATCHING ACROSS SECTION BOUNDARIES. USE PATCHED SECTION'S
; .JBFF, NOT SECTION ZERO'S, WHEN NO SYMBOLS EXIST.
;463 PTR 18-APR-84
; SIMULATE $X OF JRSTF IN SECTION ZERO WHEN RUNNING IN NON-ZERO.
;464 PTR 19-APR-84
; PRESERVE SECTION NUMBER OF PATCH SYMBOL.
;465 PTR 19-APR-84
; PERMANENTLY WRITE-ENABLE BREAKPOINT BLOCK WHEN DOING AN $X,
; SO THE "SOS FOO" DOESN'T CAUSE AN ILL MEM WRITE.
;466 PTR 23-APR-84
; IMPLEMENT $$:/TEXT/ TO LOOK UP FIRST PDV WITH NAME TEXT AND
; SET $5M TO ITS ADDRESS. USER-FRIENDLY VERSION OF $5M.
; $$1: TYPES OUT CURRENT PDV NAME IF ANY.
;467 PTR 23-APR-84
; FIX [461] SO DEFINING NEW SYMBOLS WORKS.
;470 PTR 24-APR-84
; NEW ROUTINE INCSYP TO UPDATE INTERNAL SYMBOL TABLE POINTERS AS
; WELL AS USER'S ORIGINAL POINTERS (EXCEPT FILDDT, WHICH UPDATES
; POINTERS ONLY ON CLOSE).
;471 PTR 25-APR-84
; FIX SYMCHK TO ALWAYS SET ESTUT (PREVENTS STARTUP PROBLEMS).
;472 PTR 27-APR-84
; HAVE TTYSAV CALL SYMCHK, SO POINTERS WILL REALLY BE SET UP
; ON ENTRY. THAT WAY IF THE FIRST THING THE USER DOES IS "$5M/"
; IT WILL ALREADY BE SET UP. MAKE AN EFFORT TO KEEP TOPS-10 EDDT
; WORKING WITH THIS (NOT TESTED). NUDGE CONDITIONALS TO PREVENT
; SOME UNDEFINEDS.
;473 PTR 30-APR-84
; BYTE POINTERS GIVEN TO A JSYS IN SECTION ZERO MUST BE 1-WORD LOCALS.
;474 PTR 1-MAY-84
; TURN ON FTPAGM IN -20 EXEC MODE.
;475 PTR 3-MAY-84
; LOOK FOR HISEG TABLE EVEN IF POINTERS ARE STUFFED.
;476 PTR 7-MAY-84
; TEACH INCSYP ABOUT 0$5M. DON'T CALL SYMCHK SO OFTEN (DEPRA).
; LET FILDDT READ DUMPS AGAIN. MAKE ERROR MESSAGE IF USER TRIES TO
; CREATE A PAGE WHEN $$1W.
;477 PTR 8-MAY-84
; FIX $NM (OTHER THAN $5M) IN FILDDT TO LOOK LIKE IT ALWAYS DID.
;500 PTR 8-MAY-84
; IF DDT IN NON-ZERO, PC IN ZERO, XMOVEI BECOMES PC REF INSTRUCTION.
; (XMOVEI 1,0 WOULD RETURN 1,,0 INSTEAD OF 0,,0.)
; FIX TYPEOUT OF XMOVEI 1,0 SO 0 TYPES OUT.
;501 PTR 9-MAY-84
; SWITCH MONITOR DDTS BACK TO USING EDV ([430] AND OTHERS HAD THEM
; USING JOBDAT). MAKE TTYRE6 LOOK MORE LIKE V42.
;502 PTR 12-MAY-84
; MAKE SYMCHK SET .JBUSY IF CREATING AN UNDEFINED SYMBOL POINTER
; OUT OF THIN AIR (JOBDAT ONLY). MAKE IOWBLK WORK FOR MONITORS.
; MAKE SURE SYMBOL BLOCKS CLEARED IF NO POINTERS FOUND.
;503 PTR 14-MAY-84
; IN SAVEG, DON'T SET LLOCS IF IN AN $X SITUATION (SCREWED UP
; HISEG SYMBOL TABLE). FIX BUG IN [502]. DON'T MAKE TTYSAV CALL
; SYMCHK, IT'LL HAPPEN TOO OFTEN -- CALL SYMCHK DIRECTLY WHEN DDT
; IS STARTED. DON'T NEED TO ON BREAKPOINT, DISPLAY ROUTINES WILL
; TAKE CARE OF IT.
;504 PTR 22-MAY-84
; MAKE UDDT-20 LIVE IN ITS OWN SECTION. CREATE AN "EXPORT" VECTOR
; TO BE POINTED TO BY DDT'S PDV. KEEP DDT FROM FINDING ITS OWN
; PDV UNLESS RUNNING ALONE IN THE FORK (DETERMINED VIA ENTRY VECTOR).
; DEFAULT LLOCS TO STUB'S SECTION OR ENTRY VECTOR SECTION (USER-20)
; OR DDT'S SECTION (MONITOR-20, ALL-10).
;505 JM 31-MAY-84
; GET DDT TO UNDERSTAND $N"C$ AND $N"/.../ SYNTAX. REPLACE PEEK
; JSYS WITH XPEEK% IN FILDDT.
;506 PTR 5-JUN-84
; FIX OVERFLOW AT NUM+10. FIX 3.2E2$F; BUG. MAKE SURE WE HAVE
; AN IFIW AT HIDPD1. ONLY LOOK IN DDT'S SECTION FOR ITS PDV.
;507 PTR 5-JUN-84
; TEACH CODE AT UND1, DEF5, AND DEPRA THAT UNDEFINED SYMS HAVE 30-BIT
; ADDRESS VALUES, SO FIXUPS CAN BE OUTSIDE SYM TAB'S SECTION.
; CHAINS STILL CAN'T CROSS SECTION BOUNDARIES THOUGH.
; FIX WHERE [505] BROKE $$: COMMAND.
;510 PTR 7-JUN-84
; SUPPORT ERJMPR/ERCALR/ERJMPS/ERCALS IN $X CODE.
;511 PTR 7-JUN-84
; TURN HIDPDV INTO ONCE-ONLY CODE TO PROTECT OURSELVES AGAINST OLD LINKS.
; DDT 43 WILL GO OUT BEFORE LINK 6 SO WE HAVE TO BE CAREFUL.
;512 PTR 8-JUN-84
; SPLIT THE "DANGEROUS OPCODE" TABLE INTO TWO PARTS, THE MEMORY MUNGERS
; AND THE TRULY DANGEROUS. MEMORY MUNGERS FORCE RECHECK OF SYMTAB,
; TRULY DANGEROUS GET FULL ENVIRONMENT AND BREAKPOINTS AROUND THE XCT.
; RESTORE TEMP DISPLAY MODES AT TELLX, SINCE DANGEROUS XCT SMASHES THEM.
;513 PTR 8-JUN-84
; $G WOULDN'T WORK FOR A TOPS-10 STYLE ENTRY VECTOR IN A NON-ZERO SECTION.
; MAKE IT LOOK AT <ENTRY VECTOR SECTION>,,.JBSA INSTEAD OF 0,,.JBSA TO
; DETERMINE THE SECTION-RELATIVE START ADDRESS.
;514 PTR 12-JUN-84
; $X OF A DANGEROUS INSTRUCTION FROM SECTION ZERO MUST BE EXECUTED
; IN ZERO SO ANY GENERATED TRAP/INTERRUPT CAN BE DEALT WITH BY A
; SECTION ZERO HANDLER.
;515 JM 13-JUN-84
; FILDDT(TOPS-20): ADD "ENABLE THAWED" COMMAND AND "GET <FILE>/THAWED"
; OPTION. OPEN FILE FOR UNRESTRICTED READ ACCESS WHEN READ ONLY.
;516 PTR 14-JUN-84
; ADD XMOVEI AND XHLLI TO THE HARDWARE OPCODE TABLE, PERSERVING
; HLLI AND SETMI FOR TYPEIN.
;517 PTR 14-JUN-84
; IMPLEMENT $1: COMMAND TO TYPE OUT CURRENT OPEN MODULE (GIVEN IN
; LAST $: COMMAND).
;520 JM 14-JUN-84
; IMPLEMENT $1T COMMAND TO SET BYTE POINTER TYPEOUT MODE.
;521 PTR 15-JUN-84
; REDO $XBLK NOT TO USE SOS'S, SINCE SOS CAN CHANGE USER'S FLAGS.
; FIX DANGEROUS JRST'S (E.G. XJEN) TO SET DANGEROUS FLAG.
; HANDLE LUUO'S OUTSIDE SECTION ZERO ON TOPS-20.
;522 PTR 15-JUN-84
; CLEAN UP WHAT KINDS OF $$? ARE LEGAL IN WHAT FLAVORS.
;523 PTR 18-JUN-84
; MAKE XDDT BE PSECTED LIKE UDDT WAS (SO CODE PSECT IS WRITE-LOCKED).
; FIX HIDPDV SO XDDT CAN MODIFY THE (WRITE-LOCKED) PDV, AND SO RDDT
; WON'T FALL OVER DEAD IN A USER PROGRAM.
;524 PTR 20-JUN-84
; ON TOPS-20, IF A SECTION ZERO PROGRAM USES OLD-STYLE PSI TABLES TO
; TRAP PAGE CREATES (E.G. PA1050) AND DDT CAUSES A PAGE CREATE FROM
; OUTSIDE SECTION ZERO, THE MONITOR TERMINATES THE PROCESS SINCE THE
; SECTION ZERO TABLE HAS NO PLACE FOR A 30-BIT PC. TURNING OFF THE
; PSI SYSTEM ONLY DEFERS THE INTERRUPT, WE MUST ACTUALLY DEACTIVATE
; THE CHANNEL TO PREVENT TERMINATION.
;525 PTR 20-JUN-84
; MISCELLANEOUS MINOR FIXES, MOSTLY COSMETIC. UNDEFINE FLAG POWF
; (BIT 24) SINCE IT WASN'T DOING ANYTHING USEFUL.
;526 JM 20-JUN-84
; MOVE THE ROUTINE "TBPNT" OUT OF SINGLE STEPPING CODE INTO GENERAL
; TYPEOUT SECTION. THIS WILL MAKE EDIT 520 WORK FOR FILDDT.
;527 PTR 22-JUN-84
; REDO $X SOME MORE TO LET $X OF ERSTR% JSYS WORK.
;530 JM 25-JUN-84
; SET DEFAULT SECTION WITH $V, $G, $B, $W, $N, $E, $Z, AND $U.
;531 JM 26-JUN-84
; MAKE $Z CONSISTENT WITH $W, $N, AND $E IN SETTING "." TO THE LAST
; LOCATION ZAPPED.
;532 PTR 26-JUN-84
; CLEAN UP REFERENCES TO SECUDD, ONLY USE IT IN USER DDT.
; SINCE FETCHL NOW USED ONLY TO CHASE JOBDAT STUFF, MAKE IT RETURN
; FAILURE IF SYTLOC INDICATES A PDV.
;533 PTR 26-JUN-84
; CLEAN UP SYMBOL STUFF IN EDDT SO USER MODE EDDT IS MORE LIKE NORMAL
; USER DDT. MAKE GEVECS SKIP IF ENTRY VECTOR EXISTS, NON-SKIP IF NOT.
; FIX SOME SYMBOLS SO DDT STILL ASSEMBLES FOR TOPS-10.
; HAVE TOPS-20 MONITOR DDTS CHECK MONPDV IN CASE TOPS-20 HAS A PDV.
;534 JM 27-JUN-84
; SAVE THE STATE OF THE COMF FLAG FOR OBJECTS SCANNED BY THE SYNTAX
; "LOWER<UPPER>". USE THIS INFORMATION IN SECTION DEFAULTING FOR THE
; COMMANDS $Z, $E, $W, AND $N.
;535 JM 29-JUN-84
; EXECUTE THE CONDITIONAL BREAKPOINT INSTRUCTION IN THE SECTION OF THE
; BREAKPOINT.
;536 PTR 2-JUL-84
; DON'T FORCE SECTION-REF $X TO BE DANGEROUS. CLEAR I.CJMP FLAG IN THE
; CONDITIONAL BREAKPOINT INSTRUCTION CODE.
;537 PTR 2-JUL-84
; KEEP XDDT FROM INCORRECTLY REMEMBERING TTY STATE AFTER ONCE-ONLY CODE.
;540 JM/PTR 3-JUL-84
; PARSE SIGNED EXPONENTS CORRECTLY IN FLOATING POINT TYPEIN. BAD
; BEHAVIOR ASCRIBED TO EDIT 506.
;541 PTR 5-JUL-84
; FIX HIDPDV TO HANDLE LINK 5.1 CASE CORRECTLY.
;542 JM 9-JUL-84
; MAKE LEFT HALF OF ACCCF A DOUBLE COMMA FLAG SO THAT DEFAULT SECTIONING
; WORKS PROPERLY WITH <TAB> AND "\". (CF. TOPS-10 MAINTENANCE VERSION)
;543 PTR 10-JUL-84
; IN DEPMEM WHEN WRITE-ENABLING A PAGE, TURN ON FH%EPN SO REFS TO
; SECTION 0 WORK.
;544 PTR 10-JUL-84
; FIX INCSYP ET AL. TO NOT INVALIDATE THE SYMBOL POINTER THEY JUST
; UPDATED. ALSO DO BETTER ERROR CHECKING IN DEFIN:. THIS MAKES
; DEFINING NEW SYMBOLS WORK (BROKEN SINCE [470]).
; DON'T CHECK FOR INDIRECTION IN PDV OR SYMBOL VECTOR, ADDRESSES
; MUST BE EITHER "IFIW LOCAL-ADDR" OR "GLOBAL-ADDR".
;545 PTR 11-JUL-84
; FIX DEF5 NOT TO STOMP ON W1 (NEEDED FOR THE CALL TO REMUN). THIS
; WILL CAUSE DEFINING UNDEFINED SYMBOLS TO WORK AGAIN.
; REPLACE SAVE OF W DONE IN SYMCHK (REMOVED BY 544).
;546 PTR 11-JUL-84
; IN WRTSYM, DON'T CHECK FOR HISEG SYMTAB IF PDV.
;547 JM 11-JUL-84
; GET/SET CORRECT DEFAULT SECTION FOR EFFECTIVE ADDRESS SEARCH.
;550 PTR 13-JUL-84
; MAKE REFS TO TOPS-20 DATA/CODE BE GLOBAL REFS TO SECTION 1 WHERE
; NECESSARY, SO SEC. 1 DOESN'T NEED TO BE MAPPED TO DDT'S SECTION.
;551 PTR 17-JUL-84
; FIX $D SO YOU CAN SUPPRESS THE FIRST SYMBOL IN THE TABLE.
;552 PTR 19-JUL-84
; MAKE SURE DDTSYV POINTS TO SYMTAB LOCALLY.
;553 PTR 19-JUL-84
; ADD AN ERJMP AFTER THE PDVOP% IN PDVSE2, JUST IN CASE.
; .POLOC CAN BE PRONE TO CAUSING ILL INSTR TRAPS.
;554 JM 23-JUL-84
; SET FLOATING DEFAULT SECTION WHEN OPENING LOCATIONS VIA THE LOCATION
; SEQUENCE STACK.
;555 PTR 23-JUL-84
; TRY DOING A PEEK IF XPEEK% FAILS (SO FILDDT WILL RUN ON 5.1 SYSTEMS).
;556 PTR 25-JUL-84
; IF RESTOR IS GOING BACK TO SEC. 0 AND THE PSI NEEDS TO BE TURNED
; BACK ON, DON'T DO IT TILL WE'RE ALREADY IN SEC. 0. THAT WAY DEFERRED
; INTERRUPTS WON'T CAUSE THE FORK TO HALT. DON'T BOTHER TREATING
; PAGE-CREATES AS A SPECIAL CASE ANYMORE (REMOVE [524]).
; MAKE ^Z RETURN TO THE STUB IF THERE IS ONE (SO PA1050 WILL SEE A HALT
; PC IN SEC. 0). EDIT 6 OF UDDT.MAC MUST BE INSTALLED.
;557 JM 2-AUG-84
; FILDDT: IF A LOCATION IS OPENED WITH AN EXPLICIT SECTION TYPED IN,
; USE THAT SECTION VALUE TO SET THE FLOATING DEFAULT SECTION. ALSO,
; DON'T SET THE FLOATING DEFAULT SECTION IF AN ACCUMULATOR IS POPPED
; OFF OF THE LOCATION SEQUENCE STACK.
;560 PTR 2-AUG-84
; RESERVE A FULL 100 WORDS FOR THE BREAKPOINT BLOCK. MAKE SYMBOLS
; FOR PC FLAGS. DON'T REF SECUDD IN EDDT.
;561 PTR 8-AUG-84
; MOVE DEFINITION OF SKPUSR ETC. TO AFTER THE .PSECT STATEMENT (SO
; KDDT CAN BE LOADED IN A NON-ZERO SECTION, AND NOT HAVE THE OPDEFS
; GET FIXED UP WITH SECTION NUMBERS).
;562 PTR 10-AUG-84
; REDO $X OF PUSH(J) SO WE DON'T USE STACK MEMORY BEFORE ALLOCATING
; IT IN THE STACK POINTER. CAN KILL US IF PSI TRAPS WAITING.
;563 PTR 11-AUG-84
; MAKE BUNCHES OF EDDT REFS TO EPT (AND OTHERS) BE INDIRECT INSTEAD
; INDEXED. THEN THE EPT DOESN'T HAVE TO BE IN EDDT'S SECTION.
;564 PTR 13-AUG-84
; [461] INADVERTENTLY REMOVED THE LENGTH CHECK FROM CHKSYP. PUT
; IN A LENGTH CHECK.
;565 PTR 16-AUG-84
; ADD FAKDDT ROUTINE TO KDDT. CALLED DIRECTLY BY MONITOR AFTER KDDT
; HAS CHANGED SECTIONS, SO BREAKPOINTS BREAK TO PROPER PLACES.
;566 JM 23-AUG-84
; DEFSEC: WHEN AN EXPLICIT SECTION IS TYPED IN (EITHER WITH ",," OR BY
; USING A SYMBOL WITH A SECTION NUMBER IN THE LEFT HALF, ALWAYS SET THE
; DEFAULT SECTION, EVEN WHEN REFERENCE IS MADE TO AN ACCUMULATOR
; (E.G. 1,,7).
;567 PTR 23-AUG-84
; MAKE KDDT USE MONEDV IN PREFERENCE TO JOBDAT, EVEN IN USER MODE.
;570 PTR 7-SEP-84
; PREVENT PAGE CREATES FROM GENERATING PAGE-CREATE INTERRUPTS. THIS
; IS SO CREATING THE PAGE WHERE THE BREAKPOINT BLOCK SITS DOESN'T MAKE
; TROUBLE. THIS ALSO ALLOWS THE USER TO CREATE RANDOM PAGES WITHOUT
; CAUSING AN INTERRUPT (FORMERLY, CREATING A PAGE WOULD CAUSE AN
; INTERRUPT WHICH MOST LIKELY WOULD BE ASYNCHRONOUSLY HANDLED/REPORTED).
;571 JM 10-SEP-84
; NEVER "FIX UP" A BLT INSTRUCTION FOR SINGLESTEPPING. ADD THE SPECIAL
; ENTRY "FETCHI" TO THE "FETCH" PROCEDURE. "FETCHI" IS FOR FETCHING
; INSTRUCTIONS, AND IT TREATS MEMORY ADDRESSES WITH RIGHT HALF IN THE
; RANGE 0 THROUGH 20 AS ACCUMULATOR ADDRESSES.
;572 JM 10-SEP-84
; MONITOR EDDT RUNNING IN USER MODE WILL NOT ATTEMPT TO LEAVE SECTION 0
; IF IT SHOULD HAPPEN TO FIND ITSELF THERE.
;573 JM 10-SEP-84
; WHEN PRINTING AN IFIW SECOND WORD OF A 2-WORD BYTE POINTER DISPLAY
; "<2>" AS WITH AN EFIW WORD.
;574 PTR 12-SEP-84
; USER-MODE KDDT SHOULD REF MONPDV IN SECTION ZERO, NOT SECTION 1.
;575 PTR 13-SEP-84
; USER-MODE KDDT SHOULD BE MORE LIKE USER DDT. DO NORMAL PDV
; SEARCHING FOR 6.1, STILL WIND UP WITH JOBDAT IN 6.0.
;576 PTR 13-SEP-84
; GIVE SINGLE-STEP $X AND INSTR$X DISTINCT PORTIONS OF THE BREAKPOINT
; BLOCK, SO THEY DON'T INTERFERE WITH ONE ANOTHER (WILL HAPPEN IF
; "CALL FOO$X" AND FOO HAS A BREAKPOINT IN IT). REQUIRES RECLAIMING
; THE BREAKPOINT BLOCK SPACE RESERVED FOR BREAKPOINT 0 (WHICH WILL
; NEVER BE USED).
;577 PTR 19-SEP-84
; IN FILDDT, CHECK FOR THE LAST EXISTING PAGE IN THE FILE INSTEAD OF
; ALWAYS USING THE MAXIMUM POSSIBLE LENGTH. THAT WAY SEARCHES ETC.
; WILL STOP AT "REAL EOF."
;600 PTR 26-SEP-84
; SPEED UP FNDPAG, FPVPG AND FRIENDS BY TRYING TO GUESS WHAT THE
; VIRTUAL PAGE IS GOING TO BE, INSTEAD OF PLODDING THROUGH EVERY
; PAGE EVERY TIME.
;601 PTR 27-SEP-84
; ADD "FOO$?" COMMAND TO TYPE ALL SYMBOLS BEGINNING WITH CHARS "FOO".
;602 JM 29-SEP-84
; IF DDT WAS STARTED FROM THE STUB (UDDT) AND $5M POINTS TO JOBDAT IN
; THE SAME SECTION OR $5M IS 0, CHECK FOR STUFFED SYMBOL TABLE VALUES
; ON EACH PASS THROUGH SYMCHK.
;603 PTR 10-OCT-84
; ADD NEW $L COMMANDS TO TYPE OUT SECTION/PAGE ACCESSES.
;604 PTR 10-OCT-84
; REVISE [600] SO ONE NEED NOT SUPPLY A GUESS TO FPVPG.
;605 PTR 15-OCT-84
; CALL LISTEN DURING "FOO$?" SO USER CAN ABORT HIS FOOLISH CHOICE OF
; PREFIX CHARACTERS.
;606 PTR 18-OCT-84
; HAVE FILDDT-20 PARSE UNIT, CHANNEL, CONTROLLER NUMBERS IN DECIMAL
; INSTEAD OF OCTAL.
;607 PTR 18-OCT-84
; GROW DATA PAGES TO THREE, INCREASE STACK SIZE SO MDDT WON'T
; FALL OVER FROM DECNET, REVERT MDDT TO LOCAL STACK POINTER IN 6.1.
;610 PTR 18-OCT-84
; FIX HIDPDV AGAIN SO $W DEFAULT IS PRESERVED.
;611 PTR 22-OCT-84
; FIX $L NOT TO REPORT BOTH WRITE AND COPY-ON-WRITE FOR THE SAME PAGE.
;612 JM 22-OCT-84
; DEFINE A GENERAL PURPOSE CHECKPOINT FOR MDDT, AND INSTALL IT AROUND
; THE BREAKPOINT BLOCK.
;613 PTR 31-OCT-84
; FIX [600]/[604] AGAIN.
;614 JM 7-NOV-84
; CORRECT MDDT INTERLOCK LOGIC (CF. [612]); ALSO MIGRATE TBPNT TO WORD
; TYPEOUT ROUTINES FROM COMMAND ROUTINES.
;615 JM 9-NOV-84
; IF NO ENTRY VECTOR IN FORK, USER DDT20 SETS $5M TO -1,,0 RATHER THAN
; -1,,SECDDT. VT2XX COMPATIBILITY FEATURE: "`" WORKS LIKE "<ESC>".
;616 PTR 12-NOV-84
; MAKE "ADDR$0T" DO DEFAULT SECTIONING.
;617 PTR 12-NOV-84
; MINOR BUGS IN FOO$? COMMAND.
;620 JM 16-NOV-84
; USER DDT: IF NO ENTRY VECTOR AND NO STUB, SET FLOATING DEFAULT
; SECTION TO 0 ON ENTRY. ANALOGOUS TO [615].
;621 RCB/PTR 6-DEC-84
; ALLOW TYPEOUT AND TYPEIN OF N-BIT ASCII STRINGS. $NT AND $N"
; NOW ALLOW N FROM 5 THRU 36 (DECIMAL).
;622 JMF/PTR 6-DEC-84
; PREVENT CLOBBERING PREVIOUS-CONTEXT SECTION WHEN JUMPING INTO
; NON-ZERO SECTION IN EDDT.
;623 DPM/PTR 6-DEC-84
; FIXES TO $L: MAKE SURE NOT IN SYMBOL SPACE IN TOPS-10 EXEC MODE,
; DON'T MAKE RASH ASSUMPTIONS ABOUT LOWSEG IN CHKADR, DO MORE
; RATIONAL ARG CHECKING IN FILDDT.
;624 JM 8-DEC-84
; FIX SINGLESTEP OF ILDB/IDPB WITH LOCAL ACCUMULATOR REFERENCE TO BYTE
; POINTER.
;625 PTR 12-DEC-84
; SPEED UP CHKADR IN FILDDT-20 BY NOT DOING AN RPACS% ON EVERY
; CALL. INSTEAD DO THE RPACS% WHEN THE PAGE IS MAPPED IN AND
; REMEMBER THE BITS. THIS WINS BIG ESPECIALLY IN SEARCHES WHEN
; THE USER HAS SPECIFIED SOME KIND OF MAPPING (E.G. EP$U).
;626 PTR 22-MAR-85
; FIX TEXTNT TO NOT TYPE GARBAGE FROM THE LEFTOVER BITS IN THE WORD.
;627 JM 10-APR-85
; TEXTNT TYPES OUT LEFT-JUSTIFIED BYTES ONLY.
;DDT %43(627) SHIPPED WITH TOPS-20 6.1
;630 PTR/RCB/RDH 25-SEP-85
; FOR TOPS-10, IF .JBSYM .GT. 0 THEN IT IS THE GLOBAL ADDRESS OF A
; SYMBOL TABLE VECTOR. DITTO $5M. LOOK FOR TOPS-10 ENTRY VECTOR
; ON $G. FIX UP $L, $Y COMMANDS. CHKADR, FETCH, STORE CAN SEE
; BEYOND SEC. 0 FROM SEC. 0 (TOPS-10 EDDT ONLY). FIX EXEC-MODE CHKSEC.
;631 RCB 3-OCT-85
; MAKE DEFAULT PAGING BE KL ALWAYS. ADD BLTBU/BLTUB TO $X (KS-10).
;632 RDH 7-OCT-85
; MAKE IO INSTRUCTION TYPEOUT PAY ATTENTION TO CPU TYPE (KS HAS DIFFERENT
; IO INSTRUCTION SET). ADD $20/21/22/23U TO SET KA/KI/KL/KS CPU TYPE.
;633 RDH/PTR 8-OCT-85
; MAKE SYMBOL "$NB" GLOBAL AS # BREAKPOINTS AVAILABLE (EDDT-10 ONLY);
; ENHANCE BREAKPOITN INSERT/REMOVE TO DEAL WITH ERRORS (PARTICULARLY
; BREAKPOINTS THAT MOVED); ONLY TYPE ONE ERROR MESSAGE PER BREAKPOINT
; FAILURE.
;634 RDH 29-OCT-85
; MAKE DDT %43 WORK ON TOPS-10 (ASSORTED TYPOS, ETC.). *NEVER* INSERT
; BREAKPOINTS ON $X (IT CAN'T WORK). IF AN $4M BLOCK HAS BEEN SPECIFIED,
; UNCONDITIONALLY USE IT (ALWAYS 3-WORD JSR'S, ETC.), OTHERWISE VERIFY
; THAT DDT IS MAPPED INTO THE APPROPRIATE SECTION AND BLINDLY JUMP
; INTO THAT SECTION FOR $X'ING. ALLOW NZS REFERENCES FROM SECTION ZERO
; (RENAMES NZSXCT INTO PZAFI, CALLED LIKE PCAFI; RENAMES DEFSEC INTO
; CEFFAS). FIX $L. IF NZS SYMBOL TABLE(S) AND DDT IN SECTION 0 THEN
; TRY FOR NZS, MAPPING SECTION 0 INTO SECTION 1 (USER MODE ONLY) IF
; POSSIBLE. MAKE <INSTR>$$NX TRY TO EXECUTE THE INSTRUCTION IN SECTION
; "N" (IF BLANK, THEN OK TO EXECUTE IN DDT SECTION). ALLOW BOTH .JBSYM
; AND .JBHSM TO POINT TO GLOBAL SYMBOL VECTOR ADDRESS (BUT UNDEFINEDS
; ONLY FROM .JBSYM).
;635 RCB 9-JAN-86
; FIX $X OF NZS LUUO (TOPS10). FIX USAGE OF ENTVC. UUO (TOPS10)
; IN PARTICULAR TO HELP LOCATE USER'S SYMBOL TABLE FOR RUN/USE:N WHERE
; PROGRAM CAN GET "RELOCATED" TO DIFFERENT SECTION.
;636 RDH 10-JAN-86
; $M, $I, AND $U DON'T RETURN ADDRESS AS VALUE (EDIT 333 LOST).
;637 RDH 11-JAN-86
; FILDDT CAN'T UPDATE 7.03 EXE FILE SYMBOL TABLE.
;640 RDH 19-JAN-86
; MAKE THE "N" OF $NM AND $NI COMMANDS BE *DECIMAL*.
;641 PTR 30-JAN-86
; MAKE CEFFAS DEAL WITH IMPOSSIBLE SECTION NUMBERS A BIT BETTER.
; MAKE <INSTR>$X ALWAYS EXECUTE IN THE DEFAULT SECTION, INSTEAD OF
; SOMETIMES IN DDT'S SECTION.
;642 RDH 4-MAR-86
; MAKE TAG DEFINITIONS TAKE FULL 36-BIT VALUE, RATHER THAN JUST THE
; RIGHT-HALF (18-BIT) VALUE OF "."
;DDT %44(642) Released with TOPS10 version 7.03, Spring 1986
;643 RDH 12-Apr-86 QAR 869027
; $4M falls off end of literal, Ill Mem Refs (typo in [636]).
;DDT %44A(643) Released on Autopatch tape 14, Summer 1986
;644 RCB 1-Jul-86
; Introduce $X to PMOVE & PMOVEM. Add them to the opcode tables.
;645 RCB 10-Jul-86
; Fix effective address calculation wrt global references to ACs.
; Needed for LUUO handlers and $1T typeout.
;646 RCB 11-Jul-86
; Fix some problems with supporting $$Y. Only changes the I/O setup,
; doesn't add any logic for interpreting .SYM files.
;647 RCB 11-Jul-86
; Prepare for further changes to TOPS-10 entry vector format by allowing
; IFIW as well as global address in $[n]G.
;650 RCB 11-Jul-86
; I don't know what the authors of 626 & 627 meant to accomplish, but
; those edits broke the symmetry of $nT with $7T. Restore it, this
; time correctly.
;651 RCB 15-Jul-86
; Finally teach EDDT about CPNDDT. Accomplished via new EDV words:
; .EDCPN (physical address of CPNDDT) and .EDCPU (AOBJN-style pointer
; to table of APR serial numbers).
;652 RCB 15-Jul-86
; Finally teach FILDDT about the EDV. This allows FILDDT to set up
; mapping on a crash dump (if MCO 12993 is installed). Requires EDV
; word .EDCAC (pointer to crash ACs).
;653 RCB 16-Jul-86
; Enhance foo$? (ABBREV) to accept LLIMIT, ULIMIT, and WRD2O for
; additional constraints upon symbol value, flags, and module.
; $1? will dump the open module (error if none). $4? will dump only
; globals. $40? will dump only half-killed symbols. The 74 mask
; is anded and then compared. 2 is reserved. LLIMIT and ULIMIT are
; used in the obvious fashion for restricting possible values of
; symbols to be displayed.
;654 RCB 19-Sep-86
; Fix up changing sections for NZS symbol table access to account for
; the fact that the flags are changed by PUSHJ, and hence not always
; what we expect at the first entry in PDL.
;655 RCB 30-Sep-86
; Fix up changing sections for $X of pc-reference instructions. Always
; do RESTOR/SAVE (rather than SWAP) so that SECDDT and the various
; SKPS0/SKPNS0 side-effects will be right.
;656 DPM 30-Sep-86
; Enhance FILDDT-10 by making it type the filespec being examined
; or patched like the -20 version does. Also type filespec of
; file being yanked and the number of symbols loaded.
;DDT %44B(656) released on Autopatch tape 15, Fall 1986
;657 RCB 4-Nov-86
; Fixup symbol table information typed out by $1: in FILDDT.
;660 RCB 21-Nov-86
; Fix 0$nB in non-zero sections not to set 1,,0 as the B.P. address.
;661 RCB 6-Jan-87
; Fix global breakpoints using the breakpoint block not to assume the
; JSR came from section 0.
;662 RCB 16-Jan-87
; Fix hidden symbol processing problems with TOPS-10 EDDT, especially
; for SMP. This has the side-effect of replacing edit 657.
;663 RCB 21-Jan-87
; Finally physically remove the papertape code. This finishes edits 247,
; 307, and 322. FTPTP has been completely removed.
;664 RCB 26-Jan-87
; Fix up all symbol tables in the ring of EDVs when using hidden symbol
; processing. EDDT-10 only.
;665 RCB 1-Feb-87
; Fix up $? for NZS DDT examining a program's symbols in S0.
;666 RCB 6-Mar-87
; Fix up $X of ILDB/IDPB with byte pointer in an AC and PC not in DDT's
; section to not increment the B.P. twice.
;667 RCB 6-Mar-87
; Fix up for "3/-1,,400<SP><TAB>" nonsense.
; Don't mistake garbage for an attempt at a DDT internal address, and
; allow space after a comma to override the left half for section
; defaulting.
;670 RCB 10-Mar-87
; Revoke the second half of 667.
;671 RCB 15-May-87
; Fix PDFSEC. It gets in TOPS-20's way, too.
;672 RCB 02-Jun-87
; Fixup some definitions for TOPS-20 to account for the continued
; existance of 4.1 monitors.
;673 RCB 03-Jun-87
; 672 is incomplete. Forgot about FILDDT and XPEEK%. Deal with it.
;674 RCB 28-Aug-87
; CEFFAS calls too many low core address ACs. Fix the mask.
;675 RCB 28-Aug-87
; Default MDDT's initial floating section to MSEC1 rather than to MDDT's
; own executing section. Too many problems with ill-advised $X'ing from
; section 6 happen otherwise.
;676 RCB 26-Feb-88
; Fix the copyrights for TOPS-20 7.0 and TOPS-10 7.04.
;677 RCB 26-Feb-88
; Fix problem with building WHO and with the TOPS-10 monitor's symbol
; table size in general. Add FTDSYM, debugging symbols, which defaults
; off for FTEX10 and on for all other cases. If FTDSYM is off, then
; all of DDT's local symbols will be expunged at assembly time.
;700 RCB 26-Feb-88
; Add the clearm<setm>value$nM flavor of $M. The 'clearm' is a mask
; to clear and the 'setm' is a mask to set. The masking arguments
; are applied after the 'value' argument if it is also present.
; This applies to $I as well as to $M, but it's more useful for $M.
;701 RCB 26-Feb-88
; Fix DEPMEM to be able to handle SEGOP. and .PAGWL for 7.04.
;702 RCB 06-Oct-88
; Add the $$ flavors of searches to type out the number of matches.
;703 RCB 08-Nov-88
; Finally handle SEGOP.s for 7.04. $$:/text/ looks for a hiseg named
; 'text' to use for the hiseg symbol table on a -10. Also handle
; name$$: appropriately (even for the -20).
;Become version 45 (due mainly to SEGOP.)
;704 RCB 10-Jan-88
; Fix "c$ (single-character ASCII input). Probably broken by edit 703,
; but I'm not sure.
;705 RCB 11-Mar-89
; Fix $L typeout for spy pages. They are off by one when adjacent to any
; (different) existing pages within a section.
;706 RCB 27-Apr-89
; Fix $L for virtual spy pages. The virtual bit was getting lost.
;707 RCB 20-Jun-89
; Fix $$W, $$N, $$E to type match count again.
;710 RCB 20-Jun-89
; Fix $U in FILDDT on a crash file when the EDV was good. Re-use the EDV
; information rather than reverting to $$U.
;711 RCB 21-Jun-89
; Fix $L in FILDDT for a .EXE file with mapping in use. Don't compare
; virtual page numbers against physical limits. Translate first.
;712 RCB 22-Jun-89
; Clean up some symbol definitions (PC$xxx and PG$xxx) by borrowing SYSPRM
; from GLXMAC.
;713 RCB 23-Jun-89
; Add FTPURE for starting to do XDDT on the -10.
;714 RCB 23-Jun-89
; Make $G and ^Z clear BPTIP so that we won't allow $X after a restart.
;715 RCB 18-Sep-89
; Fix reference to JOBEDV in FILDDT startup (broken on TOPS-20).
SUBTTL DDT ASSEMBLY SWITCHES
;SWITCHES FOR DDT FEATURES
;FTDEC10 ;TOPS-10 FACILITIES
;FTDEC20 ;TOPS-20 FACILITIES
;FTEXEC ;EXEC MODE FACILITIES (ALSO RUNS IN USER MODE)
;FTEX20 ;TOPS-20 MONITOR EDDT (LOADS ONLY WITH TOPS-20 MONITOR)
;FTFILE ;FILE DDT
;FTYANK ;PAPER TAPE INPUT FACILITIES ($Y)
;FTVMX ;BUILD DDT.VMX FOR TOPS-10 VIRTUAL MEMORY
;FTMON ;TOPS-20 MONITOR DDT
;FTOPX ;EXTENDED OPCODE DECODING FOR TYPEOUT
;FTDBUG ;DEBUGGING FACILITIES FOR DDT ITSELF (ESP EXEC MODE)
;FTPAGM ;PAGE MAPPING FEATURES
;FTSCSH ;SYMBOL TABLE CACHE
;FTUD20 ;TOPS-20 USER DDT (SHORTHAND SYMBOL)
;FTEX10 ;TOPS-10 EXEC DDT (SHORTHAND FOR FTDEC10&FTEXEC)
;FTUE10 ;TOPS-10 NON-FILE DDT (SHORTHAND SYMBOL)
;FTDSYM ;DEBUGGING SYMBOLS (DDT'S OWN SYMBOLS INCLUDED)
;FTPURE ;READ-WRITE PSECT STARTS OUT EMPTY (TWOSEG ON -10)
IFNDEF FTDEC10,<
IFNDEF FTDEC20,<
FTDEC10==-1
FTDEC20==0>>
IFNDEF FTDEC10,<FTDEC10==0>
IFNDEF FTDEC20,<FTDEC20==0>
IFNDEF FTFILE,<FTFILE==0>
IFNDEF FTYANK,<FTYANK==0>
IFNDEF FTEX20,<FTEX20==0>
IFNDEF FTEXEC,<
IFN FTEX20,<FTEXEC==-1>
IFE FTEX20,<FTEXEC==0>>
IFNDEF FTVMX,< FTVMX==0>
IFNDEF FTMON,< FTMON==0>
IFNDEF FTOPX,<FTOPX==-1>
IFNDEF FTDBUG,<FTDBUG==0>
IFNDEF FTPAGM,<FTPAGM==FTFILE!FTEXEC!FTDEC10> ;NEVER ON TOPS20 USER MODE
IFNDEF FTSCSH,<FTSCSH==-1> ;HAVE CACHE UNLESS EXCLUDED
;NORMALIZE ALL SWITCH VALUES TO 0 OR -1 SO BOOLEAN EXPRESSIONS IN
;CONDITIONALS WORK CORRECTLY.
DEFINE ..N (SW)<
IRP SW,<
IFN SW,<SW==-1>>>
..N <FTDEC10,FTDEC20,FTEXEC,FTEX20,FTFILE,FTYANK,FTVMX,FTMON>
..N <FTOPX,FTDBUG,FTPAGM,FTSCSH>
FTUD20==FTDEC20&<^-FTEXEC>&<^-FTFILE>&<^-FTMON> ;USER -20
FTEX10==FTDEC10&FTEXEC ;EDDT-10
FTUE10==FTDEC10&<^-FTFILE> ;NON-FILE -10
IFNDEF FTDSYM,<FTDSYM==FTDBUG!<^-FTEX10>>
IFNDEF FTPURE,<FTPURE==FTMON> ;MDDT INITIALIZES IN THE PSB
..N <FTDSYM,FTPURE>
IFN FTDEC10&<FTDEC20!FTMON!FTEX20>,<PRINTX ? Illegal FTDEC10>
IFN FTDEC20&<FTDEC10!FTYANK!FTVMX>,<PRINTX ? Illegal FTDEC20>
IFN FTEXEC&<FTFILE!FTVMX!FTMON>,<PRINTX ? Illegal FTEXEC>
IFN ^-FTEXEC&<FTEX20>,<PRINTX ? Illegal ^-FTEXEC>
IFN FTFILE&<FTEXEC!FTVMX!FTMON!FTEX20>,<PRINTX ? Illegal FTFILE>
IFN FTPURE&FTEXEC,<PRINTX ? Illegal FTPURE>
SUBTTL TITLE SETTING AND UNIVERSAL SEARCHING
SALL ;CLEAN LISTINGS
.DIREC FLBLST ;CLEANER LISTINGS
IFN FTDEC10,< ;TOPS-10 VERSIONS
SEARCH JOBDAT,MACTEN,UUOSYM ;ALL STANDARD TOPS-10 DEFINITIONS
IFE FTDBUG,<
IFN FTEXEC,<TITLE EDDT -- TOPS-10 EXEC MODE DDT>
IFN FTFILE,<TITLE FILDDT -- TOPS-10 FILE DDT>
IFN FTVMX,<
IFN FTPURE,<TITLE XDDT -- TOPS-10 EXTENDED DDT>
IFE FTPURE,<TITLE VMDDT -- TOPS-10 VM DDT>
>
IFE FTFILE!FTEXEC!FTVMX,<
TITLE UDDT -- TOPS-10 USER MODE DDT>
> ;END OF IFE FTDBUG
> ;END OF TOPS-10 TITLES
IFN FTDEC20,< ;TOPS-20 VERSIONS
SEARCH JOBDAT,MONSYM,MACSYM ;ALL STANDARD TOPS-20 DEFINITIONS
IFE FTDBUG,<
IFN FTEXEC&<^-FTEX20>,<TITLE EDDT -- TOPS-20 EXEC MODE DDT>
IFN FTEXEC&FTEX20,<TITLE KDDT -- TOPS-20 MONITOR KERNAL DDT>
IFN FTFILE,<TITLE FILDDT -- TOPS-20 FILE DDT>
IFN FTMON,<TITLE MDDT -- TOPS-20 MONITOR DDT>
IFE FTEXEC!FTFILE!FTMON,<TITLE UDDT -- TOPS-20 USER MODE DDT>
> ;END IFE FTDBUG
> ;END OF TOPS-20 TITLES
IFN FTDBUG,<TITLE DEBDDT -- DEBUGGING VERSION OF DDT>
SUBTTL PROGRAM (JOB CONTEXT) PARAMETERS
IFN FTFILE!FTVMX,< ;ONLY FILDDTS SET UP VERSION NUMBER
LOC .JBVER ;WHERE THE TOPS-10 VERSION INFO GOES
%%DDT ;SET THE VERSION WORD
RELOC ;BACK TO NORMAL
> ;END IFN FTFILE!FTVMX
IFN FTDEC10,< ;ONLY TOPS-10 USES .JBDDT
IFE FTFILE,<
LOC .JBDDT ;CONTAINS DDT END AND START ADDRESSES
XWD DDTEND,DDTX ;SET DDT END AND START ADDRESS
RELOC ;BACK TO NORMAL
> ;END IFE FTFILE
;ONLY TOPS-10 USES .JBBPT
IFE FTFILE,< ;BUT ONLY IF NOT FILDDT
LOC .JBBPT ;WHERE THE BREAKPOINT PROCESSOR GOES
$0BPT ;ADDRESS OF UNSOLICITED BREAKPOINT HANDLER
RELOC ;BACK TO NORMAL
> ;END IFE FTFILE
> ;END IFN FTDEC10
SUBTTL MACROS, ETC.
;.PHASE AND .DEPHASE MACRO DEFINITIONS
;NEEDED BECAUSE PHASE AND DEPHASE DON'T NEST
;USE THESE IN ALL CASES INSTEAD OF PHASE AND DEPHASE
..PLVL==0 ;INITIAL PHASE NESTING LEVEL
;MACRO TO REFERENCE THE LAST LOCATION AT PHASE LEVEL N
DEFINE ..PL(N)<..PL'N> ;SYMBOL DEFINED BY .PHASE
;SUBSTITUTE FOR PHASE STATEMENT
DEFINE .PHASE(N),<
..==10 ;;SAVE RADIX
RADIX 10 ;;MOST LEVELS PER CHAR
..PL(\..PLVL)==. ;;REMEMBER WHERE WE ARE
RADIX .. ;;RESTORE THE RADIX
IFE <..PLVL-^D99>,<PRINTX ? .PHASE NESTING OVERFLOW>
..PLVL==..PLVL+1 ;;BUMP NESTING LEVEL
PHASE N
> ;END OF .PHASE DEFINITION
;SUBSTITUTE FOR DEPHASE
DEFINE .DEPHASE,<
..PLVL==..PLVL-1
IFL ..PLVL,<PRINTX ? .PHASE NESTING UNDERFLOW>
IFG ..PLVL,<
..==10 ;;SAVE RADIX
RADIX 10 ;;USE RADIX WE WANT
PHASE .+..PL(\..PLVL) ;;BACK TO PREVIOUS PHASE LEVEL
RADIX .. ;;BACK TO OLD RADIX
>
IFE ..PLVL,<
DEPHASE ;;JUST DEPHASE AT OUTER LEVEL
>
> ;END OF .DEPHASE DEFINITION
;SYMBOLS NOT OTHERWISE DEFINED IN STANDARD UNIVSERALS
;TOPS-10 SPECIFIC
IFN FTDEC10,<
DEFINE TMSG(TEXT)<
OUTSTR [ASCIZ\TEXT\] ;;DEFINED IN MACSYM FOR TOPS-20
>
> ;END OF IFN FTDEC10
;TOPS-20 SPECIFIC
IFN FTDEC20,<
DEFINE ND(S,V),<IF2,<IFDEF S,<S==S>> IFNDEF S,<S==V>> ;NOT IN MACSYM
ND .CHCNH,.CHBSP ;THE -10 AND THE -20 USE DIFFERENT NAMES
IF2 <PURGE .CHBSP> ;DON'T CLUTTER UP THE SYM TABLE
OPDEF PJRST [JRST] ;NOT IN MACSYM
.NODDT PJRST ;NO TYPEOUT IN OPCODE FIELD
> ;END OF IFN FTDEC20
;GENERAL MACROS
;SAVE ERROR MESSAGE STRING FOR POSSIBLE LATER TYPEOUT
;REMOVE IFN FTDEC20
DEFINE SMERS (MSG)<
PUSH P,[[ASCIZ \MSG\]]
POP P,MEMERS>
;TYPE LITERAL STRING
DEFINE TSTR (MSG)<
MOVEI W1,[ASCIZ \MSG\]
PUSHJ P,TSTRG>
;INIT DDT STACK
IFN FTMON,<
DEFINE INIPDL<
MOVEI P,DDTPGA ;;WHERE MDDT THINKS ITS VARS ARE
CAIN P,DDTPXA ;;DIRECTLY MAPPED INTO PSB?
SKIPA P,[IOWD LPDL,PDL] ;;YES, WE CAN USE A LOCAL STACK POINTER
XMOVEI P,PDL-1> ;;MDDT STACK PTR IS GLOBAL
> ;END IFN FTMON
IFE FTMON,<
DEFINE INIPDL<MOVE P,[IOWD LPDL,PDL]>> ;OTHERS ARE LOCAL
;MDDT CHECKPOINT DEFINITIONS
IFN FTMON,<
DEFINE CHKIN (%CKLAB) <
SKIPLE CHKCNT ;;DO WE ALREADY HAVE THE LOCK?
JRST %CKLAB ;;YES
AOSE @[MSEC1,,MDDLCK] ;;NO, ATTEMPT TO TAKE LOCK
JRST [ TSTR <?MDDT BREAKPOINT BLOCK ALREADY IN USE>
POPJ P,] ;;FAIL
PUSH P,@[MSEC1,,FORKX] ;;SUCCEED
POP P,@[MSEC1,,MDDFX] ;;SHOW THE LOCK IS OURS.
%CKLAB: AOS CHKCNT> ;;INCREMENT OUR USE COUNT.
DEFINE CHKOUT<
SKIPG CHKCNT ;;DO WE HAVE THE LOCK?
JRST .+3 ;;NO, DON'T TOUCH IT.
SOSG CHKCNT ;;DECREMENT USE COUNT.
SETOM @[MSEC1,,MDDLCK]> ;;GIVE UP THE LOCK.
DEFINE BRKLCK<
SKIPG CHKCNT ;;DO WE HAVE THE LOCK?
JRST .+3 ;;NO, DON'T TOUCH IT.
SETZM CHKCNT ;;YES, CLEAR USE COUNT
SETOM @[MSEC1,,MDDLCK]> ;;GIVE UP THE LOCK.
> ;END IFN FTMON
SUBTTL DDT SYMBOLS
;DEFINE ACCUMULATORS
F=0 ;FLAGS
P=1 ;PUSH DOWN
R=<A==2> ;POINTERS TO TABLES, CORE, ETC.
S=<B==3>
W=<C==4> ;CONTAINS DISPATCH ADDRESS IN WORD ASSEMBLER
T=5 ;TRANSFER DATA
W1=6
W2=7
SCH=10 ;MODE CONTROL SWITCH FOR OUTPUT
AR=11 ;MODE CONTROL SWITCH FOR OUTPUT
ODF=12 ;MODE CONTROL SWITCH FOR OUTPUT - CURRENT RADIX
TT=13 ;TEMPORARY
TT1=14 ;TEMPORARY
TT2=15 ;TEMPORARY
TT3=16 ;TEMPORARY
.XCREF F, P, R, S, W, A, B, C, T, W1, W2, TT, TT1, TT2, TT3 ;SAVE SOME PAPER
.XCREF ..DD
IFN FTDEC20,<
T1=1
T2=2
T3=3
T4=4
P=17 ;OVERRIDES P=1 ABOVE
.XCREF T1, T2, T3, T4, P ;SAVE SOME MORE PAPER
.XCREF ..MX1, ..MX2, ..TX1, ..TX2 ;SUPPRESS JUNK SYMBOLS
> ;END OF IFN FTDEC20
;DEFINE PUSHDOWN LIST LENGTH
ND LPDL,400 ;400 WORDS IS ENOUGH FOR EVERYBODY
;(INCLUDING MDDT)
;DEFINE NUMBER OF DATA PAGES (MUST AGREE WITH MONITOR FOR MDDT)
ND NDDTPG,3 ;HERE TO AVOID MACRO BUG WITH FORWARD REF BELOW
SUBTTL GLOBAL SYMBOLS FOR USE BY THE OUTSIDE WORLD
IFE FTFILE,< ;FILDDT HAS NO GLOBAL SYMBOLS
IFE FTMON,< ;DON'T CONFLICT MDDT WITH EDDT
ENTRY DDT ;DEFINE THE MAIN DDT START ADDRESS
;USED ON "R DDT", "DDT$G", ETC.
IFN FTEXEC,<
ENTRY DDTX ;ENTRY POINT USED BY MONITORS
;ALSO ON TOPS-10 "DDT" MONITOR
;COMMAND TO CLEAR $Y IN PROGRESS
> ;END IFN FTEXEC
INTERN DDTEND ;END OF DDT, FOR USERS AND MONITOR
> ;END IFE FTMON
IFN FTDEC20,< ;TOPS-20 SPECIFIC DEFINITIONS
IFN FTUD20,< ;TOPS-20 USER DDT DEFINITIONS
INTERN DDTEXP ;"EXPORT" VECTOR FOR STUB
> ;END IFN FTUD20
IFN FTEX20,< ;TOPS-20 EDDT DEFINITIONS
ENTRY $EDDT ;FORCES LOADING OF EDDT IN LIB SEARCH
$EDDT==0 ;DON'T CARE ABOUT THE DEFINITION
EXTERN EDDBLK ;BREAKPOINT BLOCK FOR KDDT
EXTERN DDTCZ ;KDDT USER-MODE EXIT ROUTINE
INTERN FAKDDT ;RECOVER AFTER CHANGING SECTIONS
> ;END IFN FTEX20
IFN FTEX20!FTMON,< ;COMMON TOPS-20 MONITOR DEFINITIONS
EXTERN MSEC1 ;USEFUL MONITOR SECTION
EXTERN MONPDV ;MONITOR'S PDVA IF ANY
> ;END IFN FTEX20!FTMON
IFN FTMON,< ;TOPS-20 MDDT DEFINITIONS
ENTRY $MDDT ;FORCES LOADING OF MDDT IN LIBRARY SEARCH
$MDDT==0 ;DON'T CARE
ENTRY MDDTX ;MDDT EQUIVALENT OF DDTX
MDDTX=DDTX
EXTERN DDTPGA,DDTPXA ;MONITOR'S PLACE FOR MDDT'S VARIABLES
EXTERN FORKX,MDDLCK,MDDFX ;MONITOR BPT INTERLOCK LOCATIONS
EXTERN MDDBLK ;BREAKPOINT BLOCK FOR MDDT
EXTERN MRETN ;MDDT RETURN ON ^Z
EXTERN SWPMWE,SWPMWP ;WRITE-ENABLE/LOCK SWAPPABLE MONITOR
EXTERN KIEPT,SPT ;ADDRESSES OF USEFUL TABLES
INTERN NDDTPG ;MUST AGREE WITH SPACE IN PSB
> ;END IFN FTMON
> ;END IFN FTDEC20
> ;END IFE FTFILE
SUBTTL MEMORY ALLOCATION PARAMETERS
;THE FOLLOWING PARAMETERS CONTROL WHERE DDT GETS LOADED.
;RUNLOC WHERE DDT'S CODE WILL GO AT RUNTIME. IF NEGATIVE,
; DDT'S CODE WILL START AT RELOCATABLE ZERO. THIS
; PARAMETER IS IGNORED IF FTMON OR FTEX20, SINCE THESE
; FLAVORS OF DDT GO IN SPECIFIC PSECTS OF THE TOPS-20
; MONITOR.
;
;VARLOC WHERE DDT'S VARIABLES WILL GO AT RUNTIME. IF
; NEGATIVE, DDT'S VARIABLES WILL IMMEDIATELY
; FOLLOW THE CODE. IGNORED IF FTMON OR FTEX20.
;THE FOLLOWING VARIABLES DESCRIBE/REMEMBER DDT'S MEMORY LAYOUT
;BEG.C THE FIRST LOCATION CONTAINING CODE
;END.C THE LAST LOCATION CONTAINING CODE + 1
;LEN.C THE LENGTH OF THE CODE (END.C-BEG.C)
;BEG.V THE FIRST LOCATION CONTAINING VARIABLE STORAGE
;END.V THE LAST LOCATION CONTAINING VARIABLE STORAGE + 1
;LEN.V THE LENGTH OF THE VARIABLE AREA (END.V-BEG.V)
;PHVAR THE LOCATION INSIDE THE CODE AREA WHERE A PURE
; COPY OF THE VARIABLE AREA STARTS.
;DDTBEG THE LOWEST ADDRESS THAT IS PART OF DDT (FOR $$Z CODE)
;DDTEND THE HIGHEST ADDRESS (+1) THAT IS PART OF DDT
;DEFAULT RUNLOC AND VARLOC
IFN FTVMX,<
ND RUNLOC,700000 ;VMDDT DEFAULT ORIGIN
IFN FTPURE,<ND VARLOC,770000> ;TWOSEG VERSION'S VARIABLES
>
IFN FTUD20,<
ND RUNLOC,740000 ;TOPS-20 USER DDT'S DEFAULT ORIGIN
ND VARLOC,RUNLOC-NDDTPG*1000 ;ORIGIN OF -20 UDDT'S VARS
>
ND RUNLOC,-1 ;DEFAULT TO RELOCATABLE IF NOT GIVEN
ND VARLOC,-1 ; . . .
;SETUP TO ALLOCATE DDT'S CODE AT THE RIGHT PLACE
IFN FTEX20,<
.PSECT ERCOD ;-20 EDDT IN EXTENDED RESIDENT CODE
> ;END IFN FTEX20
IFN FTMON,<
.PSECT ENCOD ;-20 MDDT IN EXTENDED NON-RESIDENT CODE
> ;END IFN FTMON
IFE FTEX20!FTMON,<
IFGE RUNLOC,<
IFGE VARLOC,<
IFN FTPURE&FTDEC10,<.PSECT .HIGH.,RUNLOC> ;HISEG ON -10
IFE FTPURE&FTDEC10,<.PSECT DDTCOD/RONLY,RUNLOC>
;READ-ONLY IF VARS GO ELSEWHERE
> ;END IFGE VARLOC
IFL VARLOC,<
.PSECT DDTALL/RWRITE,RUNLOC ;READ/WRITE IF WE GET VARS TOO
> ;END IFL VARLOC
> ;END IFGE RUNLOC
IFL RUNLOC,<
RELOC 0 ;START AT RELOCATABLE 0 IF NO RUNLOC
> ;END IFL RUNLOC
> ;END IFE FTEX20!FTMON
IFGE VARLOC,<IFGE RUNLOC,<IFL <VARLOC-RUNLOC>,<
;>>> DDTBEG:! ;PUT DDTBEG HERE UNLESS SURE VARS ARE LOWER
BEG.C:! ;START OF CODE
DDTOFS:! ;OFFSET FOR COMMAND DISPATCH
SUBTTL OPDEFS
;GENERAL
OPDEF SKPUSR [SKIPL USRFLG] ;SKIP IN USER MODE
OPDEF SKPEXC [SKIPGE USRFLG] ;SKIP IN EXEC MODE
OPDEF SKPKA [SKIPN KAFLG] ;SKIP FOR KA10
OPDEF SKPNKA [SKIPE KAFLG] ;SKIP NOT KA10
OPDEF SKPKI [SKIPN KIFLG] ;SKIP FOR KI10
OPDEF SKPNKI [SKIPE KIFLG] ;SKIP NOT KI10
OPDEF SKPKL [SKIPN KLFLG] ;SKIP FOR KL10
OPDEF SKPNKL [SKIPE KLFLG] ;SKIP NOT KL10
OPDEF SKPKS [SKIPN KSFLG] ;SKIP FOR KS10
OPDEF SKPNKS [SKIPE KSFLG] ;SKIP NOT KS10
OPDEF SKPKLS [SKIPN KLSFLG] ;SKIP FOR KL10 OR KS10
OPDEF SKPKIP [SKIPN KIPAG] ;SKIP FOR KI-PAGING
OPDEF SKPKLP [SKIPN KLPAG] ;SKIP FOR KL-PAGING
OPDEF SKPS0 [SKIPE SECDDT] ;SKIP IF IN ZERO SECTION
OPDEF SKPNS0 [SKIPN SECDDT] ;SKIP IF IN NON-ZERO SECTION
;PROCESSOR
OPDEF APRID [700000,,000000];KL-10/KS-10 READ APR ID
OPDEF RDAPR [700240,,000000];KS-10 CONI APR,
OPDEF WRAPR [700200,,000000];KS-10 CONO APR,
OPDEF RDCSB [702040,,000000];KS-10 READ CST BASE
OPDEF RDSPB [702000,,000000];KS-10 READ SPT BASE
OPDEF RDTIMS [702200,,000000];KS-10 RDTIME
OPDEF WRTIMS [702600,,000000];KS-10 WRTIME
OPDEF BLTBU [716000,,000000];KS-10 BLT BYTE TO UNIBUS
OPDEF BLTUB [717000,,000000];KS-10 BLT UNIBUS TO BYTE
OPDEF PMOVE [052000,,000000];KL-10 PHYSICAL MOVE
OPDEF PMOVEM [053000,,000000];KL-10 PHYSICAL MOVEM
OPDEF GFAD [102B8] ;G-FLOATING ADD
OPDEF GFSB [103B8] ;G-FLOATING SUBTRACT
OPDEF GFMP [106B8] ;G-FLOATING MULTIPLY
OPDEF GFDV [107B8] ;G-FLOATING DIVIDE
OPDEF XMOVEI [SETMI] ;MACRO HASN'T GOT IT YET
OPDEF IFIW [1B0] ; . . .
.NODDT IFIW ;DON'T WANT TO OVERRIDE SETZ
OPDEF NOP [TRN] ;FAST NO-OP
SUBTTL MISCELLANEOUS DDT SYMBOLS
;ASSEMBLY CONSTANTS
ND PAGSIZ,1000 ;"BLOCK" SIZE OF LOGICAL DISK/MEMORY ALLOCATION
PAGMSK==PAGSIZ-1 ;"AND" TO MASK TO ADDRESS WITHIN PAGE
PG2WRD==^D36-^L<PAGSIZ-1> ;"LSH" FOR PAGE TO WORD ADDRESS
WRD2PG==-PG2WRD ;"LSH" FOR WORD TO PAGE ADDRESS
VMADR==7777,,777777 ;MASK FOR VIRTUAL MEMORY ADDRESS
VSECNO==7777,,0 ;VIRTUAL SECTION NUMBER MASK
PCFLGS==777740,,0 ;PC FLAG MASK
DDAF==1B0 ;DDT INTERNAL ADDRESS
EFIWX==17B5 ;INDEX FIELD IN EFIW
EFIWI0==1B0 ;EFIW INDIRECT BIT 0
EFIWI1==1B1 ;EFIW INDIRECT BIT 1
ND BLKSIZ,200 ;"BLOCK" SIZE OF PHYSICAL DISK ALLOCATION
BLKMSK==BLKSIZ-1 ;"AND" TO MASK TO ADDRESS WITHIN BLOCK
BL2WRD==^D36-^L<BLKSIZ-1> ;"LSH" FOR BLOCK TO WORD ADDRESS
WRD2BL==-BL2WRD ;"LSH" FOR WORD TO BLOCK ADDRESS
PG2BLK==PG2WRD-BL2WRD ;"LSH" FOR PAGE TO BLOCK ADDRESS
BLK2PG==-PG2BLK ;"LSH" FOR BLOCK TO PAGE ADDRESS
ND SKPMAX,3 ;MAX NUMBER OF SKP'S IN $X LOGIC
ND NSAVTB,^D17 ;NUMBER OF PC'S IN RING BUFFER ($<CR> ETC.)
ND INDPTH,100 ;MAX NESTING IN $E SEARCHES
ND ADRNGE,1000 ;ADDRESS RANGE FOR SYMBOL+VALUE TYPEOUT
ND XTYPAV,4321 ;EXEC-MODE TYPEAHEAD CHECK INTERVAL
ND XTYPAW,4 ;WORDS OF BUFFER FOR EXEC-MODE TYPEAHEAD
ND PVNAML,^D39 ;PDV NAME LENGTH FOR TYPEIN
PVNMSZ==<PVNAML/5>+1 ;WORDS TO STORE PDV NAME
IFN FTFILE,<ND SCSIZ,^D200> ;SIZE OF SYMBOL TABLE CACHE FOR FILDDT
IFE FTFILE,<ND SCSIZ,^D100> ; ALL OTHER DDTS
;BREAKPOINT SYMBOLS, BREAKPOINT BLOCK ALLOCATION
; REPEAT NBP,<BLOCK NBPBW> ;STORAGE FOR EACH BREAKPOINT (1-12)
; ;(NOTE: BREAKPOINT 0 DOESN'T NEED SPACE HERE)
; BLOCK BPBRST ; FOR USE BY RESTOR
; BLOCK BPB$XL ; FOR USE BY $X CODE
; BLOCK BPI$XL ; FOR USE BY INSTR$X CODE
ND NBP,^D12 ;NUMBER OF BREAKPOINTS
IFN FTEX10,<$NB==:NBP> ;FOR TOPS-10 MONITOR
ND NBPBW,3 ;WORDS PER ENTRY IN BREAKPOINT BLOCK
BPBRST==NBP*NBPBW ;1ST BPBLK WORD AVAIL TO RESTOR
ND BPBRSL,4 ;WORDS NEEDED BY RESTOR IN BPBLK
BPB$X==BPBRST+BPBRSL ;1ST BPBLK WORD AVAIL TO $X
ND BPB$XL,2*<SKPMAX+1>+5;WORDS NEEDED BY $X IN BPBLK
BPI$X==BPB$X+BPB$XL ;1ST BPBLK WORD AVAIL TO INSTR$X
ND BPI$XL,2*<SKPMAX+1>+1;WORDS NEEDED BY INSTR$X IN BPBLK
BPBLEN==BPI$X+BPI$XL ;TOTAL LENGTH OF USED BREAKPOINT BLOCK
BPBMAX==100 ;ADVERTISED LENGTH OF BREAKPOINT BLOCK
; (MUST AGREE W/ TOPS-20 EDDBLK, MDDBLK)
IF2,<IFL <BPBMAX-BPBLEN>,<PRINTX ?BREAKPOINT BLOCK TOO LONG>>
;ADDRESS (PAGE) ACCESS BIT DEFINITIONS
DEFINE SYSPRM(NAM,T10,T20),<
IFN FTDEC10,<NAM==<T10>>
IFN FTDEC20,<NAM==<T20>>>
SYSPRM PG$EXI, PA.GNE, PA%PEX ;PAGE EXISTS
SYSPRM PG$REA, PA.GRD, PA%RD ;PAGE CAN BE READ
SYSPRM PG$WRT, PA.GWR, 1B15 ;PAGE HAS SOME KIND OF WRITE ACCESS
SYSPRM PG$WT, PG$WRT, PA%WT ;PAGE IS REALLY WRITABLE
SYSPRM PG$CPY, 0, PA%CPY ;PAGE IS COPY-ON-WRITE
SYSPRM PG$EXE, 0, PA%EX ;PAGE IS EXECUTABLE
SYSPRM PG$ACC, PA.GAA, 0 ;PAGE ACCESS ALLOWED
SYSPRM PG$PRV, 0, PA%PRV ;PAGE IS PRIVATE
SYSPRM PG$SHR, PA.GSH, 0 ;PAGE IS SHARABLE
SYSPRM PG$HGH, PA.GHI, 0 ;PAGE IS PART OF HIGH SEGMENT
SYSPRM PG$ABZ, PA.GAZ, 1B17 ;PAGE IS ALLOCATED BUT ZERO
SYSPRM PG$SPY, PA.GSP, 0 ;PAGE IS ACTUALLY SPYING ON SOMEONE
SYSPRM PG$VIR, PA.GVR, 0 ;SPY PAGE IS VIRTUAL (ON MONITOR)
SYSPRM PG$NPG, PA.GCP, 0 ;PAGE CANNOT BE PAGED OUT
SYSPRM PG$PGO, PA.GPO, 0 ;PAGE IS PAGED OUT
SYSPRM PG$LCK, PA.GLK, 0 ;PAGE IS LOCKED IN MEMORY
SYSPRM PG$NCA, PA.GNC, 0 ;PAGE IS NOT CACHED
SYSPRM PG$SXI, PA.GSN, PA%PEX ;SECTION EXISTS
SYSPRM PG$SMA, PA.GIN, 1B12 ;SECTION MAPPED ELSEWHERE
SYSPRM PG$SIN, PA.GIN, SM%IND ;SECTION MAPPED INDIRECTLY
SYSPRM PG$SFJ, 0, 1B11 ;SECTION MAPPED TO FORK OR JFN
SYSPRM PG$SEC, PA.GSC, 37B17 ;SECTION NUMBER MAPPED TO
SYSPRM PG$FRK, 0, 777777 ;FORK/JFN MAPPED TO
;BITS AND FIELDS RELEVANT TO KL PAGING.
IFN FTEXEC!FTMON!FTPAGM,<
AGEMSK==777B5 ;AGE FIELD
CSWRB==1B18 ;CST WRITE ENABLE BIT
CORMB==1B35 ;CST MODIFIED BIT
PTRCOD==7B2 ;POINTER CODE FIELD
IMMCOD==1 ;IMMEDIATE POINTER CODE
SHRCOD==2 ;SHARED POINTER CODE
INDCOD==3 ;INDIRECT POINTER CODE
IMMPTR==<IMMCOD>B2 ;IMMEDIATE POINTER
PTPUB==1B3 ;POINTER PUBLIC BIT
PTWR==1B4 ;POINTER WRITE BIT
PTCACH==1B6 ;POINTER CACHE BIT
MSECTB==540 ;MONITOR SECTION TABLE IN EPT
PGKLMD==1B21 ;KL PAGING MODE (IN CONI PAG,)
PGTPEN==1B22 ;TRAP ENABLE (PAGING ON) (IN CONI PAG,)
TWUSR==1B0 ;USER MODE BIT IN PF AND MAP WORD
TWHPFF==1B1 ;HARD FAILURE BIT
TWVALD==1B2 ;VALID BIT
TWWRT==1B5 ;WRITE REF BIT
> ;END OF IFN FTEXEC!FTMON!FTPAGM
;PC BITS OF INTEREST
SYSPRM PC$AFI, PC.AFI, PC%AFI ;ADDRESS FAILURE INHIBIT
SYSPRM PC$USR, PC.USR, PC%USR ;USER MODE
SYSPRM PC$BIS, PC.BIS, PC%BIS ;FIRST PART DONE
SYSPRM PC$UIO, PC.UIO, PC%UIO ;USER IO MODE
;TERMINAL CONTROL (IN TTYMSK, N$1M COMMAND)
;LEFT HALF BITS, PRESERVED AND SET ONLY BY USER
TT$EYB==1B15 ;ECHO $Y BIT (0=ECHO, 1=SUPPRESS)
TT$BPI==1B16 ;PRINT INSTRUCTION ON BPT (0=YES, 1=NO)
TT$SPC==1B17 ;3 SPACES OR TAB (0=SPACES, 1=TAB)
; (CONTROLS ONLY TTAB; TEXT OUTPUT OK)
;RIGHT HALF BITS, SET AUTOMATICALLY ON USER DDT ENTRY (NOT APPLICABLE
;TO TOPS-20), PRESERVED IN EXEC DDT (WHERE THEY MUST MANUALLY BE SET).
TT$TAB==1B34 ;TAB CAPABILITY
; (IF 1 THEN TERMINAL HANDLES TABS)
TT$DEL==1B35 ;FANCY DELETE HANDLING
; (IF 1 THEN <BS><SP><BS>)
;FOR FILE DDT ONLY
IFN FTFILE,<
FIL==1 ;PRIMARY FILE I/O CHANNEL
ND WINMAX,^D20 ;PAGE "CACHE" SIZE - PAGES KEPT IN CORE
ND MEXSIZ,^D512*^D32 ;MAX PAGES IN REASONABLE .EXE FILE
;.EXE DIRECTORY INFORMATION
SV$HIS==SV%HIS ;PAGE IS PART OF HIGH SEGMENT
SV$SHR==SV%SHR ;PAGE IS SHARABLE
SV$WRT==SV%WRT ;PAGE IS WRITABLE
SV$CON==SV%CON ;PAGE IS CONCEALED
SV$ABZ==SV%ABZ ;PAGE IS ZERO
SV$MOD==1B17 ;PAGE HAS BEEN MODIFIED (WINDIR BIT)
SV$FPN==777,,777777 ;FILE PAGE NUMBER MASK
> ;END OF IFN FTFILE
;************************************************************
;
; TEMP DEFS TIL UNIVERSALS HAVE THEM INCORPORATED
;
;************************************************************
IFN FTDEC10,< ;SOME TOPS-10 STUFF
.PVCNT==0 ;PDV LENGTH
.PVNAM==1 ;POINTER TO NAME STRING
.PVSYM==6 ;SYMBOL VECTOR WORD
.PVLVR==12 ;LINK VERSION WORD
SV%ABZ==0 ;EXE DIRECTORY - PAGE IS ZERO
> ;END OF TOPS-10 STUFF
IFN FTDEC20,< ;AND SOME TOPS-20 STUFF
.SVDIR==1776 ;EXE DIRECTORY HEADER TYPE
SV%HIS==1B0 ;EXE DIRECTORY - PAGE IS HISEG PAGE
SV%SHR==1B1 ;EXE DIRECTORY - PAGE IS SHARABLE
SV%WRT==1B2 ;EXE DIRECTORY - PAGE IS WRITABLE
SV%CON==0 ;EXE DIRECTORY - PAGE IS CONCEALED
SV%ABZ==1B3 ;EXE DIRECTORY - PAGE IS ZERO
.PVEXP==.PVSTR ;"EXPORT" VECTOR (USED TO BE START ADR)
> ;END OF FTDEC20 STUFF
.SVVEC==1775 ;EXE DIRECTORY ENTRY VECTOR TYPE
.SVPDV==1774 ;EXE DIRECTORY PDV TYPE
;PDV SYMBOL VECTOR SYMBOLS
.STLEN==0 ;LENGTH WORD IN SYMBOL VECTOR
.STDAT==0 ;TYPE/LENGTH WORD IN SUBTABLE
.STPTR==1 ;ADDRESS WORD IN SUBTABLE
ST%TYP==77B5 ;TYPE FIELD IN .STDAT WORD
ST%LEN==^-ST%TYP ;LENGTH FIELD IN .STDAT WORD
.UNDFD==0 ;UNDEFINED SYMBOL TYPE CODE
.R50D==1 ;RADIX-50 DEFINED TYPE CODE
.R50U==2 ;RADIX-50 UNDEFINED TYPE CODE
;*** FLAGS IN F ***
FEF== 1B0 ;"E" FLAG
COMF== 1B1 ;COMMA TYPED
TIF== 1B2 ;TRUNCATE TO 18 BITS - SET BY SPACE OR COMMA
DVF== 1B3 ;DIVIDE
FPF== 1B4 ;"." TYPED
CCF== 1B5 ;"$$" TYPED
STF== 1B6 ;SUPPRESS TYPEOUT
SAF== 1B7 ;RIGHT ANGLEBRACKET TYPED
FAF== 1B8 ;LEFT ANGLEBRACKET TYPED
SPF== 1B9 ;SPACE TYPED (USED BY CEFFAD)
MLF== 1B10 ;MULTIPLY
PTF== 1B11 ;ARITHMETIC OPERATOR TYPED
CF== 1B12 ;"$" TYPED
LTF== 1B13 ;LETTER TYPED IN CURRENT SYLLABLE
DTF== 1B14 ;DIGIT TYPED
SF== 1B15 ;SYLLABLE
MF== 1B16 ;MINUS SIGN TYPED
QF== 1B17 ;QUANTITY TYPED IN TO WORD ASSEMBLER
DDLF== 1B18 ;DDT INTERNAL SYMBOL TYPED
ROF== 1B19 ;REGISTER OPEN
TXF==1B20 ;IN TEXT ([$]"/---/) COMMAND
USYMF==1B21 ;R POINTS TO THE UNDEFINED SYMBOL TABLE
MDLCLF==1B22 ;MULT DEF LOCAL SYMBOL (EVAL)
PNAMEF==1B23 ;PROGRAM NAME SEEN IN SYM TABLE SEARCH
;BIT 24 AVAILABLE
LF1== 1B25 ;OUTPUT ONE REGISTER IN FORCED MODE
OLF== 1B26 ;OUTSIDE LOCAL FLAG IN LOOK
CF1== 1B27 ;OUTPUT ONE REGISTER AS CONSTANT
NAF== 1B28 ;NEGATIVE ADDRESSES PERMISSABLE
FANYSF==1B29 ;EVAL OR LOOK HAS FOUND A SYMBOL
OPTRYF==1B30 ;WE'RE TRYING TO DECODE A SYMBOLIC OPCODE
HSYMF== 1B31 ;R POINTS TO HISEG SYMBOL TABLE
OKAF== 1B32 ;OK AMBIGUOUS (LOOK ROUTINE)
OUTF== 1B33 ;OUTPUT
ITF== 1B34 ;INSTRUCTION TYPED
Q2F== 1B35 ;NUMBER TYPED AFTER $
;DEFINE SYMBOL TABLE SYMBOL TYPES
GLOBL== 04B5 ;GLOBAL SYMBOL
LOCL== 10B5
PNAME== 74B5 ;PROGRAM NAME
DELI== 20B5 ;DELETE INPUT
DELO== 40B5 ;DELETE OUTPUT
;DEFINE UNDEFINED SYMBOL TABLE (.JBUSY) TYPES
STADD== 1B0 ;IF 1, THEN ADDITIVE REQUEST
STLH== 1B1 ;IF 1, THEN REQUEST FOR LEFT HALF
STNEG== 1B4 ;IF 1, THEN NEGATIVE REQUEST
;RANDOM SYMBOL DEFINITIONS FOR TOPS-10
IFN FTDEC10,<
;THE FSBLK BITS
FS$SWT==1B0 ;SWITCH SPECIFIED
FS$DEV==1B2 ;DEVICE SPECIFIED
FS$NAM==1B3 ;FILENAME SPECIFIED
FS$EXT==1B4 ;EXTENSION (FILE TYPE) SPECIFIED
FS$PTH==1B5 ;DIRECTORY PATH SPECIFIED
FS$FIL==FS$DEV!FS$NAM!FS$EXT!FS$PTH ;FILE SPEC WAS SPECIFIED
;I/O CHANNELS
IFN FTYANK,<
CM==17 ;I/O CHANNEL TO READ COMMAND FILES
ND YBFSIZ,203 ;SIZE OF [INTERNAL] BUFFER FOR COMMAND FILES
> ;END IFN FTYANK
> ;END OF IFN FTDEC10
SUBTTL START DDT
IFE FTFILE,<
IFN FTDBUG,<
DEBDDT::>
DDTX:
DDT:
IFN FTPURE&FTDEC10,<DEFINE SETRT1<@[0,,.JBBLT]>>
IFN FTPURE,<
MOVEM T,SETRT1 ;SAVE AN AC
IFN FTDEC10,<
DMOVEM TT1,@[0,,.JBBLT+1] ;SAVE SOME MORE ACS
MOVNI TT1,<<END.V!PAGMSK+1>-<BEG.V&<^-PAGMSK>>>/PAGSIZ
XMOVEI TT2,BEG.V ;GET -VE LENGTH AND ADDRESS
LSH TT2,WRD2PG ;CONVERT TO STARTING PAGE NUMBER
TXO TT2,PA.GDC ;OK IF PAGES ALREADY EXIST
MOVE T,[.PAGCD,,TT1] ;UUO ARGUMENT POINTER
PAGE. T, ;TRY TO CREATE THE PAGES
TRNA ;CAN'T CREATE IN PHYSICAL MEMORY
JRST DDTIN0 ;PAGES CREATED
TXO TT2,PA.GSL ;TRY TO MAKE THE PAGES ABZ INSTEAD
MOVE T,[.PAGCD,,TT1] ;UUO ARGUMENT POINTER
PAGE. T, ;TRY TO ALLOCATE THE PAGES
TRN ;GIVE UP AND HOPE FOR THE BEST
DDTIN0: DMOVE TT1,@[0,,.JBBLT+1] ;RESTORE UUO ARGUMENT ACS
> ;END OF IFN FTDEC10
MOVE T,BPT$B+B$JSR
CAMN T,[JSR BCOM] ;VARIABLES AREA INITIALIZED?
JRST DDTIN1 ;YES
MOVE T,[PHVAR,,BEG.V] ;NO, DO IT
BLT T,VAREND-1
IFN FTDEC10,<
XMOVEI T,$0BPT ;WHERE ^D SHOULD GO
MOVEM T,@[0,,.JBBPT] ;SET IT UP
SKIPE @[0,,.JBDDT] ;IF ALREADY HAVE THIS,
JRST DDTIN1 ;DON'T WASTE THE UUO
MOVE T,[DDTEND,,DDT] ;NO--WE NEED TO SET THIS UP
SETDDT T, ;SO DO IT
> ;END OF IFN FTDEC10
DDTIN1: MOVE T,SETRT1 ;RESTORE SCRATCH AC
> ;END IFN FTPURE
IFN FTYANK,<
SETZM COMAND> ;INDICATE NO COMMAND FILE IF
;STARTING BY DDT COMMAND
JSR SAVE
PUSHJ P,REMOVB
IFN FTUD20,< ;CHECK DDTPDV BEFORE CALLING SYMCHK
SKIPN DDTPDV ;DID WE LOOK FOR IT YET?
PUSHJ P,HIDPDV ;NO, FIND IT. COME BACK IF NON-EXISTANT.
SKIPL T,DDTPDV ;ALREADY LOCATE DDT'S PDV?
HLL T,SECDDT ;YES, FIX UP SECTION NUMBER
MOVEM T,DDTPDV ;REMEMBER PDVA IN OUR SECTION
> ;END IFN FTUD20
PUSHJ P,SYMCHK ;MAKE SURE SYMBOLS ARE OK
IFE FTVMX!FTMON,<MOVE W1,[ASCII /DDT/]> ;IDENTIFY USER MODE DDT
IFN FTVMX,<
IFE FTPURE,<MOVE W1,[ASCII /VMDDT/]> ;IDENTIFY TOPS-10 VM DDT
IFN FTPURE,<MOVE W1,[ASCII /XDDT/]> ;IDENTIFY TOPS-10 X DDT
>
IFN FTMON,<MOVE W1,[ASCII /MDDT/]> ;IDENTIFY TOPS-20 MDDT
IFN FTEXEC&<^-FTMON>,<
SKPUSR ;IF EXEC MODE, THEN
MOVE W1,[ASCII /EDDT/] ;IDENTIFY EXEC MODE DDT
> ;END OF IFN FTEXEC
PUSHJ P,TEXT2 ;TYPE MESSAGE SAYING WHICH DDT
IFN FTDBUG,<
MOVEI W1,[ASCIZ/ (debugging)/]
PUSHJ P,TSTRG ;DIFFERENTIATE FROM REGULAR DDT(S)
> ;END IFN FTDBUG
JRST DD1.0 ;GO FOR IT!
> ;END IFE FTFILE
;RUDE HACK TO TRY TO GET THE COPYRIGHT TO BE INTACT IN DDT.REL
.ORG 0
EXP 0
.ORG
;LEGAL NOTICE FOR BINARIES
ASCIZ "
COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1970,1989. ALL RIGHTS RESERVED.
"
SUBTTL DDT COMMAND PARSER
DD1.0: SKIPE T,PTLLC ;GET LAST PATCH LOCATION CHANGED
MOVEM T,LLOC ;SET . TO IT, IF WE WERE PATCHING
SETZM PTLOC ;DEFINE NO PATCH IN PROGRESS
DD1: PUSHJ P,TCRLF
DD1.5: TXZ F,ROF ;CLOSE ANY OPEN REGISTER
MOVE T,[XWD SCHM,SCH]
BLT T,ODF ;LOAD ACS
MOVE T,PSVBTS
MOVEM T,SVBTS
MOVE T,PBYSS
MOVEM T,BYSS
SKIPA ;SKIP TAB TYPEOUT
RET: PUSHJ P,TTAB ;TYPE A TAB AND FALL THROUGH TO DD2
IFN FTMON,<BRKLCK> ;GIVE UP MDDT LOCK IF HOLDING IT.
DD2: MOVE T,[SCH,,SCHR] ;SAVE CURRENT TYPEOUT MODES
BLT T,ODFR ;IN CASE REPARSE NEEDED
SETZM PRNC ;PARENTHESES COUNT
INIPDL ;INIT STACK POINTER
SETZM WAKALL ;SET WAKEUP SET TO PUNCT AND CTRLS
XMOVEI T,RET ;INIT TOP OF STACK TO RET
MOVEM T,XPDL ;SO COMMAND ROUTINES CAN POPJ
DMOVE T,USYMP+S$ADR ;GET ORIGINAL UNDEFINED SYMBOL PTR
DMOVEM T,ESTUT ;INIT UNDEFINED SYM ASSEMBLER COPY
LIS0C: TXZ F,<^-<STF>&<-1,,0>>!LF1!CF1!OKAF!ITF!Q2F
LIS0E: TXZ F,<^-<STF!FAF!SAF>&<-1,,0>>!NAF!DDLF
SETZM ACCCF ;CLEAR COMMACOMMA FLAG/VALUE
SETZM WRD
LIS1: SETZM FRASE
TXZ F,FEF ;TURN OFF SCIENTIFIC EXPONENT FLAG
LIS2: MOVEI T,1
MOVEM T,FRASE1
TXZ F,MLF!DVF
L1: TXZ F,CF!CCF!SF!FPF!Q2F!LTF!TXF!DTF ;TURN OFF CONTROL, SYL, PERIOD FLAG
L1A: SETZM SYL
L1RPR: SETZM SYM
MOVEI T,6
MOVEM T,TEM ;INIT SYMBOL COUNTER
MOVE T,[POINT 7,OPTXT]
MOVEM T,CHP ;SETUP FOR OPEVAL SYMBOL
SETZM DEN
SETZM WRD2D
SETZM WRD2O
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
L2: PUSHJ P,TIN ;PICK UP CHARACTER
CAIL T,"A"+40 ;LOWER CASE A
CAILE T,"Z"+40 ;LOWER CASE Z
JRST .+2
TRC T,40 ;CHANGE LOWER CASE TO UPPER CASE
TXNE F,CF ;CONTROL FLAG
JRST L21
CAIG T,"Z" ;Z
CAIGE T,"A" ;A
JRST .+2
JRST LET
L21: CAIN T,"`" ;<GRAVE> MAPPED TO <ESC>
MOVEI T,.CHESC
MOVE R,T
CAILE T,137 ;DISPATCH TABLE HAS ENTRIES ONLY .LE. 137
JRST ERR
IDIVI R,3 ;REMAINDER GIVES COLUMN, QUOTIENT GIVES ROW
LDB W,BDISP(R+1) ;GET 12 BIT ADDRESS FROM DISPATCH TABLE
CAIGE W,MULT-DDTOFS ;FIRST EVAL ROUTINE
JRST DDTOFS(W)
L0: MOVE T,SYL
TXNN F,LTF
JRST POWER
;TIME TO EVALUATE A SYMBOL. IF THIS IS IN THE OPCODE FIELD (1ST THING
;TYPED AND TERMINATED WITH A SPACE), THEN SEARCH ORDER IS:
;1. OPDEFS FROM THE S.T. (B0-8 .NE. 0) 2. BUILT-IN OPCODES 3. REST OF S.T.
;IF THE SYMBOL TYPED IS NOT IN THE OPCODE FIELD, THEN THE ORDER IS:
;1. ANY MATCH IN THE S.T. 2. DDT'S BUILT-IN OPCODES.
;THE FLAG OPTRYF INDICATES THAT WE ARE TRYING TO SEARCH FOR AN OPCODE.
TXO F,OPTRYF ;ASSUME WE ARE IN THE OPCODE FIELD
CAIN W,SPACE-DDTOFS ;IS TERMINATOR A SPACE?
SKIPE WRD ;IS CONSTRUCTED WORD SO FAR ZERO?
TXZ F,OPTRYF ;NO, NOT AN OPCODE
PUSHJ P,EVAL ;TRY FOR A MATCH IN THE S.T.
JRST [ TXZ F,OPTRYF ;SO UNDEF TEST BELOW WILL WORK
JRST L27] ;TRY BUILT-IN OPCODES
TXNE F,OPTRYF ;ONLY WANT OPDEFS?
TXNE T,777B8 ;YES, IS THIS ONE?
JRST L3 ;WE'LL TAKE ANYTHING OR THIS IS AN OPCODE
MOVEM T,TENSYM ;ONLY NON-OPCODE FOUND, SAVE TENATIVE MATCH
L27: PUSHJ P,OPEVAL ;SEARCH FOR A (BETTER?) MATCH IN OPCODES
SKIPA T,TENSYM ;NOTHING, HAD BETTER BE A SAVED VAL
JRST L3 ;BETTER MATCH FOUND, GO WITH IT
TXZN F,OPTRYF ;DID EARLIER EVAL FIND ANYTHING?
JRST UND1 ;NO, GIVE UP
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
L3: CAIN W,ASSEM-DDTOFS ;DEFINED SYMBOL FOLLOWED BY #?
JRST ERR ;IF DEFINED, DON'T ALLOW #
L4: TXZE F,MF
MOVN T,T
TXNN F,SF
CAIE W,LPRN-DDTOFS
JRST .+2
JRST LPRN
EXCH T,FRASE1
TXNN F,DVF
IMULB T,FRASE1
TXZE F,DVF
IDIVB T,FRASE1
CAIGE W,ASSEM-DDTOFS
JRST DDTOFS(W) ;MULTIPLY OR DIVIDE
ADDB T,FRASE
CAIGE W,SPACE-DDTOFS
JRST DDTOFS(W) ; + - @ ,
MOVE W1,T ;GET A WORKING COPY OF ARGUMENT
XOR W1,WRD ;WILL ADD OVERFLOW?
JUMPL W1,SKP311 ;NO, DO IT NORMALLY
TLC T,(1B0) ;YES, TURN OFF SIGN BIT
ADD T,WRD ;NOW DO THE ADD
TLCA T,(1B0) ;FIX THE SIGN BIT AND SKIP
SKP311: ADD T,WRD
TXNE F,TIF ;TRUNCATE INDICATOR FLAG
HLL T,WRD ;TRUNCATE
MOVEM T,WRD
TXNN F,QF
MOVE T,LWT
SETZM R
DMOVE W1,ESTUT ;GET ADR AND LENGTH FOR DEPRA
CAMN W1,USYMP+S$ADR ;IF THERE ARE ANY UNDEFINED SYMBOLS IN
JRST L5 ;THE CURRENT EXPRESSION, ANYTHING EXCEPT
CAILE W,CARR-DDTOFS ;FURTHER EXPRESSION INPUT, OR DEPOSITING
JRST ERR ; INTO MEMORY IS ILLEGAL
L5: CAIG W,RPRN-DDTOFS
JRST DDTOFS(W)
SKIPN PRNC ;WHEN INSIDE ( ), CURRENT EXPRESSION INVALID
JRST DDTOFS(W) ;FOR ANYTHING OTHER THAN MORE EXPRESSION INPUT
JRST ERR
;CALL TO EVAL ARGUMENT IF NOT ALREADY DONE (I.E. CODE WAS IN "NO-EVAL"
;ADDRESS RANGE)
XEVAL: MOVEI W,[POPJ P,] ;COUNT ON THIS LITERAL BEING AFTER EVERYTHING
SUBI W,DDTOFS ;ADJUST FOR OFFSET
JRST L0 ;GO EVAL, THEN JUMP TO THE POPJ
;HANDLE AN UNDEFINED SYMBOL
UND1: SKIPN ESTUT ;ANY UNDEFINED SYMBOL TABLE?
JRST UNDEF ;NO, CAN'T DO THIS
PUSHJ P,EVALU ;SEE IF SYM IS IN THE UNDEFINED TABLE
JRST UND3 ;SYMBOL DOES NOT EXIST
TXNE F,ROF ;SYM EXISTS, LOCATION OPEN
CAILE W,CARR-DDTOFS ;AND STILL BUILDING WORD FOR IT?
JRST UNDEF ;NO - THEN "U" ERROR (E.G. "=" CMD)
CAIE W,ACCF-DDTOFS ;EXPRESSION INVOLVING A COMMA?
SKIPE PRNC ;OR INSIDE PARENTHESIS?
JRST UNDEF ;YES - "U" ERROR
JRST UND4 ;NO, CONTINUE
UND3: CAIN W,ASSEM-DDTOFS ;DEFINING SYMBOL VIA "#" CMD
TXNN F,ROF ;FOR A LOCATION THAT IS OPEN?
JRST UNDEF ;NO - THEN "U" ERROR
SKIPE PRNC ;YES - INSIDE PARENTHESIS?
JRST ERR ;YES - ILLEGAL, "?" ERROR
UND4: MOVEI T,"#"
CAIE W,ASSEM-DDTOFS
PUSHJ P,TOUT
SOS ESTUT ;MAKE ROOM IN UNDEF TABLE
SOS ESTUT
AOS ESTUTL ;UPDATE LENGTH TOO
AOS ESTUTL
MOVE T,SYM
TXO T,GLOBL
MOVX R,1B1 ;DEPOSIT INTO 1ST WORD OF UNDEF TABLE
PUSHJ P,DSYMER ;DEPOSIT AND TYPE ? IF IT FAILS
MOVE T,LLOCO ;WANT 30-BIT FIXUP ADDRESS
TXNE F,MF
TXO T,STNEG ;SET FLAG TO SHOW SUBTRACTIVE REQUEST
TXO T,STADD ;SET FLAG TO SHOW UNCHAINED REQUEST
ADDI R,1
PUSHJ P,DSYMER
SETZ T,
JRST L4
;DDT'S COMMAND PARSER DETERMINES WHAT TYPE OF COMMAND THIS IS BY
;RANGE-CHECKING THE DISPATCH ADDRESS OF THE COMMAND TO SEE WHICH
;ONE OF THE BELOW REGIONS IT FALLS INTO, THEREFORE:
;
;
; ***** WARNING ******
;
;DO NOT MOVE A COMMAND ROUTINE ACROSS A REGION BOUNDARY UNLESS YOU KNOW
;WHAT YOU ARE DOING! THE PARSER IS VERY UNFORGIVING IN THIS RESPECT!
;
;
;THE FOLLOWING CLASSES OF COMMAND EXIST:
;
;CLASS 1: COMMANDS THAT TAKE NO ARGUMENT, OR THAT TAKE A SYMBOL
; NAME WITHOUT EVALUATION.
;
;CLASS 2: MULTIPLY AND DIVIDE.
;
;CLASS 3: COMMANDS THAT ADD SOME FUNCTION OF THE UPCOMING QUANTITY
; TO THE ACCUMULATING RESULT.
;
;CLASS 4: LAST COMMANDS THAT ARE LEGAL INSIDE PARENTHESES.
;
;CLASS 5: LAST COMMANDS THAT ARE LEGAL WHEN THE EXPRESSION
; CONTAINS UNDEFINED SYMBOLS.
;
;CLASS 6: EVERYTHING ELSE. THESE COMMANDS TYPICALLY TAKE A
; COMPLETELY EVALUATED EXPRESSION, THAT CANNOT CONTAIN
; REFERENCES TO UNDEFINED SYMBOLS.
;
;
;NOTE THAT THESE CLASSES ARE ONLY APPROXIMATE. REFER TO THE CODE IN
;THE COMMAND PARSER FOR DEFINITIVE INFORMATION.
SUBTTL COMMAND DISPATCH TABLE
BDISP: POINT 12,DISP(R),11
POINT 12,DISP(R),23
POINT 12,DISP(R),35
DISP:
DEFINE D (Z1,Z2,Z3)<
BYTE (12) Z1-DDTOFS,Z2-DDTOFS,Z3-DDTOFS
IFN <<Z1-DDTOFS>!<Z2-DDTOFS>!<Z3-DDTOFS>>&<-1,,770000>,
<PRINTX Z1, Z2, OR Z3 TOO LARGE FOR DISPATCH TABLE> >
;THIS MACRO PACKS 3 ADDRESSES INTO ONE WORD; EACH ADR IS 12 BITS
D (ERR,ERR,ERR); (0) ^@ ^A ^B
D (CNTRLZ,ERR,CNTRLE); (3) ^C ^D ^E
D (ERR,ERR,VARRW); (6) ^F ^G ^H
D (TAB,LINEF,ERR); (11) ^I ^J ^K
D (ERR,CARR,ERR); (14) ^L ^M ^N
D (ERR,ERR,ERR); (17) ^O ^P ^Q
D (ERR,ERR,ERR); (22) ^R ^S ^T
D (ERR,ERR,ERR); (25) ^U ^V ^W
D (ERR,ERR,CNTRLZ); (30) ^X ^Y ^Z
D (CONTROL,ERR,ERR); (33) ^[ ^\ ^]
D (ERR,ERR,SPACE); (36) ^^ ^_
D (SUPTYO,TEXI,ASSEM); (41) ! " #
D (DOLLAR,PERC,ERR); (44) $ % &
D (DIVD,LPRN,RPRN); (47) ' ( )
D (MULT,PLUS,ACCF); (52) * + ,
D (MINUS,PERIOD,SLASH); (55) - . /
D (NUM,NUM,NUM); (60) 0 1 2
D (NUM,NUM,NUM); (63) 3 4 5
D (NUM,NUM,NUM); (66) 6 7 8
D (NUM,TAG,SEMIC); (71) 9 : ;
D (LLIM,EQUAL,ULIM); (74) < = >
D (QUESTN,INDIRE,ABSA); (77) ? @ A
D (BPS,CON,SYMD); (102) B C D
D (EFFEC,SFLOT,GO); (105) E F G
D (HWRDS,PILOC,ERR); (110) H I J
D (KILL,PAGMAP,MASK); (113) K L M
D (NWORD,BITO,PROCD); (116) N O P
D (QUAN,RELA,SYMBOL); (121) Q R S
D (TEXO,SETPAG,WATCH); (124) T U V
D (DBLU,XEC,TAPIN); (127) W X Y
D (ZERO,OCON,ICON); (132) Z [ \
D (OSYM,VARRW,UNDRL); (135) ] ^ _
;THIS TABLE DOES NOT HAVE ENTRIES FOR CHARS .GE. 140; THESE
; ARE DETECTED AS ERRORS NEAR L21:
SUBTTL COMMAND ROUTINES -- CLASS 1
;*************** START OF CLASS ONE COMMANDS ***************
;"ERR" IS THE DISPATCH FOR ALL UNDEFINED COMMANDS. VARIOUS COMMANDS
;ALSO JUMP TO ERR, WRONG, ETC. IF THEY DETECT SOME KIND OF ERROR.
WRONG: MOVE W1,[ASCII /XXX/]
PUSHJ P,TEXT
JRST WRONG6
RERR: SETZ T, ;ERROR RETURN WO PRINTING ANYTHING
JRST WRONG2
ERR: MOVEI T,"?" ;DDT'S UBIQUITOUS QUESTION MARK
JRST WRONG2 ;JOIN COMMON ERROR PROCESSING
MULDEF: SKIPA T,["M"] ;MULTIPLY-DEFINED SYMBOL
UNDEF: MOVEI T,"U" ;UNDEFINED SYMBOL
WRONG2: INIPDL ;ENSURE FRESH STACK
IFN FTYANK,< ;IF COMMAND FILES SUPPORTED
SKIPE COMAND ;IN A COMMAND FILE?
SKIPN YASWF ;YES, ABORT ON COMMAND ERROR?
JRST WRONG3 ;NO,KEEP ON GOING (IGNORE ERROR)
PUSH P,T ;YES, SAVE ERROR SYMBOL
PUSHJ P,PTRKIL ;KILL OFF THE COMMAND FILE
POP P,T ;RESTORE ERROR SYMBOL
TXZ F,ROF ;ARBITRARILY CLOSE OPEN LOCATION
> ;END IFN FTYANK
WRONG3: JUMPE T,WRONG4 ;SKIP DINK IF NOTHING TO TYPE HERE
PUSHJ P,TOUT ;ISSUE ERROR MESSAGE
PUSHJ P,TBEL ;AND DINK THE USER
WRONG4: PUSHJ P,TTYCLR ;CLEAR INPUT BUFFER
WRONG6: TXNN F,ROF ;REGISTER OPEN?
JRST DD1 ;NO, CRLF. OTHERWISE, FALL INTO RET
JRST RET
;HERE ON A DIGIT
NUM: TXO F,DTF ;DIGIT TYPED
ANDI T,17 ;T HOLDS CHARACTER
TXNE F,CF!FPF
JRST NM1
MOVE W,SYL
LSH W,3
ADD W,T
MOVEM W,SYL
MOVE W1,DEN
MULI W1,12 ;CONVERT TO DECIMAL WITHOUT OVERFLOW
ADD W2,T
MOVEM W2,DEN
AOJA T,LE1A
DOLLAR: SKIPA T,[46+101-13] ;RADIX 50 $ TO BE
PERC: MOVEI T,47+101-13 ;PERCENT SIGN
LET: TXC F,SF!FPF!DTF ;EXPONENT IFF (LTF)'*(FEF)'*(T=105)*(SF)*(FPF)*(DTF)=1
TXZN F,LTF!FEF!SF!FPF!DTF
CAIE T,"E"
TXOA F,LTF
TXOA F,FEF
JRST LET1
TXZN F,MF
SKIPA W1,SYL
MOVN W1,SYL
MOVEM W1,FSV
SETZM DEN
LET1: SUBI T,101-13 ;FORM RADIX 50 SYMBOL
LE1A: TXO F,SF!QF
LE2: SOSGE TEM ;IGNORE CHARACS AFTER 6
JRST L2
MOVEI W,50
IMULM W,SYM ;MULTIPLY BY RADIX 50
ADDM T,SYM ; AND ADD NEW CHAR INTO SYM
PUSHJ P,PSYMT ;CONVERT LETTERS BACK TO ASCII
IDPB T,CHP
JRST L2
NUM1: MOVE W,WRD2O ;OCTAL FORM OF NUMBER AFTER $
LSH W,3
ADD W,T
MOVEM W,WRD2O
EXCH T,WRD2D ;DECIMAL FORM OF NUMBER AFTER $
IMULI T,12
ADDM T,WRD2D
TRO F,Q2F
JRST L2
NM1: TXNE F,CF
JRST NUM1
MOVEI W1,6 ;FORM FLOATING POINT NUMBER
AOS NM1A
XCT NM1A ;MOVEI W2,..
MOVSI R,201400
NM1A1: TRZE W2,1
FMPR R,FT(W1)
JUMPE W2,NM1B
LSH W2,-1
SOJG W1,NM1A1
NM1B: MOVSI W1,211000(T)
FMPR R,W1 ;COMPUTE VALUE OF NEW DIGIT
FADRB R,FH ;ADD VALUE INTO FLOATING NO.
MOVEM R,SYL
AOJA T,LE1A
POWER: TXNN F,FEF
JRST L4 ;NO EXPONENT
;REMOVE USELESS CODE
MOVE W2,DEN
SETZM FRASE
MOVEI W1,FT-1
TXZE F,MF
MOVEI W1,FT01
SKIPA T,FSV
POW2: LSH W2,-1
TRZE W2,1
FMPR T,(W1)
JUMPE W2,L4
SOJA W1,POW2
PERIOD: TXNN F,CF!CCF ;$. OR $$. COMMAND?
JRST PERIO2 ;NO, JUST . CHARACTER BY ITSELF
IFE FTFILE,< ;YES
SKIPN BPTIP ;BREAKPOINT IN PROGRESS?
JRST ERR ;NO, THEN NOT LEGAL AFTER ALL
TXNN F,CCF ;$. OR $$. COMMAND?
SKIPA T,PCWRD ;$. -- CURRENT $X PC
MOVE T,I.NPC ;$$. -- PREVIOUS $X PC
TXZA F,CF!CCF ;CLEAR CONTROL FLAGS
> ;END IFE FTFILE
IFN FTFILE,<
JRST ERR> ;ILLEGAL IN FILDDT
PERIO2: MOVE T,LLOC ;JUST ".", LAST LOCATION OPENED
TXNE F,SF
MOVE T,DEN
MOVEM T,SYL
TXNE F,FPF ;HAS A PERIOD BEEN SEEN BEFORE?
TXO F,LTF ;YES, TWO PERIODS MAKES A SYMBOL
TXON F,FPF!SF!QF
SETZ T,
IDIVI T,400
SKIPE T
TLC T,243000
TLC W1,233000
FAD T,[0] ;NORMALIZE T AND W1
FAD W1,[0]
FADR T,W1
MOVEM T,FH
HLLZS NM1A
MOVEI T,45 ;RADIX 50 PERIOD
JRST LE2
QUAN: TXNN F,CCF ;$Q OR $$Q, WHICH?
SKIPA T,LWT ;$Q STRAIGHT
MOVS T,LWT ;$$Q SWAPPED
QUAN1: MOVEM T,SYL
QUAN2: TXO F,SF!QF ;WRD,SYL STARTED
TXZ F,CF!CCF
JRST L2
;HERE WHEN ESC TYPED
CONTRO: TXOE F,CF
TXO F,CCF
SETOM WAKALL ;SET WAKEUP ON EVERYTHING
JRST L2
QUESTN: PUSHJ P,TCRLF ;HERE FOR "?"
IFN FTDEC20,<
TXNE F,CCF ;TWO ESC?
JRST [ PUSHJ P,XEVAL ;YES, EVAL PREV EXPRESSION
MOVEI T1,.PRIOU
HRLOI T2,.FHSLF ;ASSUME THIS FORK, LAST ERROR
IFN FTEXEC,<
SKPUSR ;ONLY LEGAL IN USER MODE
JRST ERR ;EXEC MODE, ERROR
> ;END IFN FTEXEC
IFN FTFILE,<
TXC F,QF ;TEST FOR ILLEGAL COMBINATIONS
TXNE F,QF!FAF ;FOO$$? IS ONLY LEGAL FORM
JRST ERR ;FORK OR NO ERR CODE, NO GOOD
> ;END IFN FTFILE
IFE FTFILE,<
TXNE F,FAF ;FORK SPECIFIED?
HRL T2,LLIMIT ;YES
TXNE F,QF ;ERROR CODE SPECIFIED?
> ;END IFE FTFILE
HRR T2,WRD ;YES
SETZ T3,
ERSTR%
ERJMP ERR ;TRAP ILLEGAL FORK NUMBER FROM USER
JRST ERR
JRST DD1] ;DONE
> ;END IFN FTDEC20
TXNE F,CF ;ONE ESC?
JRST [ TXNE F,QF!SAF!FAF!Q2F ;YES, ANYTHING TYPED IN FRONT?
JRST ABBREV ;YES, GO TYPE SOME SYMBOLS
SKIPE W1,MEMERS ;YES, TYPE LAST ERROR MESSAGE
PUSHJ P,TSTRG
JRST DD1]
TXNE F,LTF ;HAS A SYMBOL BEEN TYPED?
JRST QLIST ;YES
PUSHJ P,USYSET ;NO, LIST UNDEFINED SYMBOLS
QUEST2: SOSGE R ;POINT TO NAME WORD OF PREVIOUS SYMBOL
PUSHJ P,ADVSYM ;DONE, SEE IF ANY MORE TABLE
SKIPA W2,@SYPTR ;GET THE NAME
JRST DD1 ;ALL DONE, <CRLF> AND RESTART
TXZ W2,PNAME ;CLEAR FLAGS
PUSHJ P,PSYM ;TYPE THE SYMBOL
PUSHJ P,TCRLF ;END WITH A CRLF
SOJA R,QUEST2 ;SKIP VAL WORD OF NEXT SYMBOL AND LOOP
;HERE TO LIST ALL REFERENCES TO A SYMBOL
QLIST: PUSHJ P,SYMSET ;SET UP TO WALK THROUGH TABLE
QLIST2: SOSGE R ;ANY MORE TABLE?
PUSHJ P,ADVSYM ;MAYBE NOT, CHECK IT OUT
SKIPA W1,@SYPTR ;YES, GET THE NEXT NAME
JRST DD1 ;ALL DONE, <CRLF> AND GET NEXT COMMAND
TXZE W1,PNAME ;IS THIS THE NEXT MODULE NAME?
JRST QLIST4 ;NO, GO SEE IF THE SYMBOL NAME MATCHES
MOVE W2,W1 ;SAVE THIS MODULE NAME IN CASE WE MATCH
SOJA R,QLIST2 ;GET NEXT NAME
QLIST4: CAME W1,SYM ;A MATCH?
SOJA R,QLIST2 ;NO, PROCEED
PUSHJ P,PSYM ;YES, TYPE CURRENT MODULE NAME
MOVE W1,@SYPTR ;RETRIEVE FLAGS
TXNN W1,GLOBL ;A GLOBAL SYMBOL?
JRST QLIST6 ;NO, GO TYPE CRLF
PUSHJ P,TSPC ;YES, TYPE " G"
MOVEI T,"G" ; . . .
PUSHJ P,TOUT ; . . .
QLIST6: PUSHJ P,TCRLF ;END LINE
SOJA R,QLIST2 ;ON TO ANOTHER SYMBOL
;FOO$? COMMAND -- TYPE OUT SYMBOLS STARTING WITH FOO
ABBREV: TXNE F,TIF!COMF!PTF!MF!CCF ;CHECK FOR LEGAL ARGUMENTS
JRST ERR ;$$ AND EXPRESSION ARE ILLEGAL
SKIPN W1,SYM ;ANYTHING RESEMBLING A SYMBOL TYPED?
TXNE F,SAF!FAF!Q2F ;NO, IS IT OK ANYWAY?
SKIPA W2,W1 ;YES, GET ANOTHER COPY
JRST ERR ;NO, COMPLAIN
TXNN F,Q2F ;DID WE GET ANY FLAGS?
SETZM WRD2O ;NO, MAKE SURE WE KNOW IT
MOVX T,1B0 ;NEGATIVE INFINITY
TXNN F,FAF ;HAVE A LOWER LIMIT?
MOVEM T,LLIMIT ;NO, SET IT UP
TXNE F,FAF ;CHECK AGAIN
SKIPA T,LLIMIT ;YES, COPY IT
MOVX T,<^-<1B0>> ;NO, USE POSITIVE INFINITY
TXNN F,SAF ;IF NO UPPER LIMIT GIVEN,
MOVEM T,ULIMIT ;USE WHAT WE JUST SET UP
MOVE T,ULIMIT ;GET UPPER LIMIT
CAMGE T,LLIMIT ;LIMITS IN THE RIGHT ORDER?
JRST ERR ;NO, COMPLAIN
MOVEI T,75 ;ONLY MASKS CURRENTLY DEFINED
ANDCA T,WRD2O ;SEE IF ANY UNKNOWN BITS ARE ON
JUMPN T,ERR ;COMPLAIN IF SO
ABBRE1: CAMLE W2,[RADIX50 0,%%%%%] ;PADDED ENOUGH YET?
JRST ABBRE2 ;YES
IMULI W1,50 ;SHIFT SYM ONE PLACE TO THE LEFT
IMULI W2,50 ;THIS ONE TOO
ADDI W2,47 ;AND PAD TO BE UPPER LIMIT
JRST ABBRE1 ;SEE IF IT'S ENOUGH
;HERE WITH W1 LEFT JUSTIFIED, BLANK PADDED, AND W2 LEFT JUSTIFIED, MAX PADDED.
ABBRE2: DMOVEM W1,ABBSY1 ;SAVE THE PADDED SYMBOLS
PUSHJ P,SYMSET ;SET UP TO LOOK AT SYMBOL TABLE
MOVE T,WRD2O ;GET FLAGS AGAIN
TRZE T,1 ;WANT ONLY OPEN SYMBOL TABLE?
TXNN F,PNAMEF ;YES, IS THERE ONE OPEN?
CAIA ;IT'S OK, PROCEED
JRST ERR ;NO, GIVE UP
ANDCAM T,WRD2O ;MAKE 0/NON-0 FLAG FOR LATER
ROT T,-6 ;SHIFT TO MATCH PNAME
MOVEM T,ABBSY3 ;SAVE FOR FLAG TESTING
ABBRE3: TRNN R,36 ;EVERY FEW SYMBOLS
JRST [ PUSHJ P,LISTEN ;CHECK FOR TYPEIN
JRST .+1 ;NOTHING, KEEP GOING
JRST DD1] ;USER WANTS TO ABORT
SOSGE R ;COUNT DOWN SYMBOLS
PUSHJ P,ADVSYM ;REACHED END, ANY MORE?
SKIPA W2,@SYPTR ;FETCH THE SYMBOL
JRST DD1 ;NO MORE SYMBOLS, ALL DONE
MOVE T,W2 ;KEEP A COPY WITH THE FLAGS
TXZE W2,PNAME ;IS IT A MODULE NAME?
TDZA W1,W1 ;NO, REMEMBER THAT
SETO W1, ;YES, REMEMBER THAT
ABBRE5: CAMG W2,[RADIX50 0,%%%%%] ;PADDED TO SIX CHARS?
JRST [ IMULI W2,50 ;NO, SHIFT ONE PLACE
JRST ABBRE5] ;AND TRY AGAIN
JUMPE W1,ABBRE7 ;IS IT A MODULE NAME?
MOVE W,W2 ;YES, SAVE (PADDED) NAME
SKIPN WRD2O ;IF ALL MODULES DESIRED,
SOJA R,ABBRE3 ;TRY NEXT SYMBOL
AOS T,WRD2O ;INCREMENT COUNTER
CAIN T,2 ;IF JUST PASSING OUR DESIRED MODULE NAME,
SOJA R,ABBRE3 ;KEEP GOING
JRST DD1 ;ELSE DONE
ABBRE7: CAML W2,ABBSY1 ;IS IT IN RANGE?
CAMLE W2,ABBSY2
SOJA R,ABBRE3 ;NO, TRY NEXT SYMBOL
AND T,ABBSY3 ;YES, GET ITS FLAGS
CAME T,ABBSY3 ;SEE IF A MATCH
SOJA R,ABBRE3 ;NO, TRY NEXT
XMOVEI T,@SYPTR ;POINT TO SYMBOL ENTRY
AOJ T, ;WANT VALUE WORD
MOVE T,@T ;FETCH IT
CAML T,LLIMIT ;IN RANGE?
CAMLE T,ULIMIT ;BOTH WAYS?
SOJA R,ABBRE3 ;NO, TRY NEXT SYMBOL
PUSH P,R ;YES, SAVE SYMBOL INDEX
PUSH P,T ;AND VALUE
PUSHJ P,PSYM ;YES, TYPE OUT THE (PADDED) SYMBOL
PUSHJ P,TTAB ;WHITE SPACE
MOVE W2,W ;GET MODULE NAME
PUSHJ P,PSYM ;TYPE THAT TOO (ALSO PADDED)
PUSHJ P,TSPC ;A SPACE
MOVE W1,@SYPTR ;GET SYMBOL FLAGS
MOVEI T,"G" ;INDICATE GLOBAL SYMBOL
TXNN W1,GLOBL ;UNLESS OF COURSE...
MOVEI T," " ;IT'S A LOCAL
PUSHJ P,TOUT ;TYPE THE INDICATOR
PUSHJ P,TTAB ;MORE WHITE SPACE
MOVE T,(P) ;RETRIEVE VALUE
PUSHJ P,TOC ;TYPE VALUE NUMERICALLY
POP P,W1 ;GET VALUE BACK
MOVN W2,W1 ;(X .AND. -X) = RIGHTMOST BIT OF X
AND W2,W1 ;FIND THE BIT
CAMN W2,W1 ;TYPE BIT NUMBER ONLY IF SINGLE-BIT VALUE
JFFO W1,.+2 ;FIND THE BIT NUMBER INTO W2
JRST ABBRE9 ;NOT EXACTLY ONE BIT, DON'T TYPE IT
MOVE W1,[ASCII / (1B/] ;SEPARATING TEXT
PUSHJ P,TEXT ;TYPE IT OUT
MOVE A,W2 ;GET THE NUMBER (NOTE: A=R)
PUSHJ P,FP7 ;TYPE IT IN DECIMAL
MOVEI T,")" ;CLOSING TEXT
PUSHJ P,TOUT ;TYPE IT
ABBRE9: POP P,R ;RESTORE SYM INDEX
PUSHJ P,TCRLF ;CLOSE OUT THE LINE
SOJA R,ABBRE3 ;AND GO FOR NEXT SYMBOL
;$K COMMAND -- SUPPRESS A SYMBOL TO DDT TYPEOUT OR DELETE IT ENTIRELY
KILL: TXNN F,LTF ;DELETE SYMBOLS
JRST ERR
MOVE S,SYM ;GET SYMBOL
IFN FTSCSH,< ;ONLY IF USING SYMBOL TABLE CACHE
PUSHJ P,DELCSH ;REMOVE SYMBOL FROM SYMBOL TABLE CACHE
> ;END IFN FTSCSH
PUSHJ P,EVAL
JRST KILL2
MOVE R,W1 ;SYMBOL INDEX INTO R
MOVE T,W2 ;FLAGS INTO T
TXO T,DELO ;ASSUME DELETE OUTPUT
TXNE F,CCF ;$$K?
MOVX T,DELO!DELI!37777B17 ;MAKE SYM DELETED IN AND OUT
PJRST DSYMER ;DEPOSIT IF POSSIBLE
KILL2: SKIPN ESTUT ;ANY UNDEFINED TABLE?
JRST UNDEF ;NO, CAN'T FIND THE SYMBOL
KILL4: PUSHJ P,EVALU ;SEE IF ANY MORE OCCURENCES OF SYM
POPJ P, ;NO, DONE
PUSHJ P,REMUN
JRST ERR ;CAN'T MODIFY SYMTAB
JRST KILL4 ;LOOK FOR MORE OCCURENCES
;$D ;DELETE LAST SYM & PRINT NEW
SYMD: SKIPL R,SPSAV ;PICK UP POINTER TO LAST SYM
PUSHJ P,FETSYM ;PICK UP SYMBOL
JRST ERR ;CAN'T GET IT?
MOVE S,T ;COPY SYMBOL
IFN FTSCSH,< ;ONLY IF USING SYMBOL TABLE CACHE
PUSHJ P,DELCSH ;REMOVE IT FROM THE SYMBOL TABLE CACHE
> ;END IFN FTSCSH
TXO T,DELO ;TURN ON "SUPPRESS OUTPUT" BIT
PUSHJ P,DSYMER ;STORE BACK IN SYMBOL TABLE
MOVE T,LWT
JRST CONSYM ;PRINT OUT NEXT BEST SYMBOL
;COLON OR ALT COLON OR ALT ALT COLON COMMANDS
TAG: TXNE F,CCF ;SYMBOL OR PDV?
JRST PDVSET ;PDV NAME
TXNE F,CF ;DEFINE SYMBOL OR OPEN SYMBOL TABLE?
JRST NAMSET ;OPEN (SELECT) LOCAL SYMBOL TABLE
TXNN F,LTF ; NO LETTERS IS ERROR
JRST ERR ; GO SAY ERROR
TXNE F,FAF ; DEFINE SYMBOLS
JRST DEFIN ;A.LT.B:
MOVE W,LLOCO ;DEFINE SYMBOL (TAG) TO BE "."
MOVEM W,LLIMIT ;SAVE NEW TAG VALUE
DEFIN: MOVE S,LLIMIT ;GET VALUE BEING DEFINED
IFN FTSCSH,< ;ONLY IF USING SYMBOL TABLE CACHE
PUSHJ P,DELCSV ;REMOVE ANY CACHE SYMBOL USING THIS VALUE
> ;END IFN FTSCSH
PUSHJ P,EVAL ;DEFINED SYMBOL?
JRST DEF1 ;NO - DEFINE
MOVE S,SYM ;YES - GET SYMBOL NAME BEING DEFINED
IFN FTSCSH,< ;ONLY IF USING SYMBOL TABLE CACHE
PUSHJ P,DELCSH ;REMOVE THE SYMBOL FROM THE CACHE
> ;END IFN FTSCSH
MOVE R,W1 ;REMEMBER SYMBOL INDEX IN R
JRST DEF4 ;REDEFINE EXISTING SYMBOL
DEF1: TXZ F,HSYMF ;ASSUME LOWSEG SYMBOL TABLE
SKIPN SYMP+S$ADR ;DEFINE A NEW SYMBOL
JRST [ SKIPN HSYMP+S$ADR ;NO ST, TRY HISEG PTR
JRST ERR ;NONE THERE EITHER
MOVEI W1,HSYMP ;WANT TO UPDATE HISEG POINTER
PUSHJ P,INCSYP ;GO TRY
JRST DMER1 ;COULDN'T, GO SAY WHY
TXO F,HSYMF ;REMEMBER HISEG TABLE USED
SKIPL PRGM ;AN OPEN MODULE IN THE HIGH SEG?
JRST DEF2 ;NO, CONTINUE
JRST DEFF] ;YES, COMPENSATE FOR SUB FIRST
MOVEI W1,SYMP ;WANT TO UPDATE LO SEG POINTER
PUSHJ P,INCSYP ;GO DO IT
JRST DMER1 ;CAN'T, GO SAY WHY
SKIPG PRGM ;AN OPEN MODULE IN THE LOWSEG TABLE?
JRST DEF2 ;NO, CONTINUE
DEFF: AOS PRGM ;YES, COMPENSATE FOR THE SUB
AOS PRGM ; . . .
DEF2: AOS PTFIX ;COMPENSATE FOR THE SUB HERE TOO
AOS PTFIX ;SO PAT.. WILL BE MOVED
IFN FTSCSH,< ;ONLY IF USING SYMBOL TABLE CACHE
PUSHJ P,CLRCSH ;CLEAR CACHE, ALL INDEXES NOW WRONG
> ;END IFN FTSCSH
SOS ESTUT ;EAT TWO WORDS OF PATCH SPACE
SOS ESTUT ; FOR NEW SYMBOL TO LIVE IN
SKIPN R,ESTUTL ;DOES AN UNDEFINED TABLE EXIST?
JRST DEF3 ;NO, JUST DEC ADDRESS OF WHERE IT WOULD EXIST
;FALL THROUGH TO NEXT PAGE
;HERE WHEN WE WANT TO INSERT A NEW SYMBOL, BUT THE UNDEFINED SYMBOL
;TABLE IS IN THE WAY. MOVE THE LAST SYMBOL OF THE UNDEFINED TABLE TO
;RIGHT BEFORE THE FIRST ONE, AND USE THE WORDS FREED TO INSERT THE NEW
;DEFINED SYMBOL. THIS IS OK BECAUSE THE UNDEFINED TABLE IS NOT ORDERED.
TXO R,1B1 ;FORM AN UNDEFINED ST SYMBOL INDEX
PUSHJ P,FETSYM ;GET 1ST WORD OF LAST SYMBOL
JRST ERR ;ERROR?
MOVE W1,R ;SAVE WHERE WE GOT IT
MOVX R,1B1 ;POINT TO 1ST WORD (USED TO BE IN PATCH AREA)
PUSHJ P,DSYMER ;STORE SYMBOL IN NEW HOME
AOS R,W1 ;POINT TO 2ND WORD OF LAST SYMBOL
PUSHJ P,FETSYM ;GET IT
JRST ERR ;ERROR
MOVX R,1B1+1 ;2ND WORD OF TABLE
PUSHJ P,DSYMER ;DEPOSIT
;NOW TO STORE THE SYMBOL TO BE DEFINED. ENTER AT DEF3 TO APPEND TO THE
;SYMBOL TABLE AS A GLOBAL DEFINITION IN MODULE PAT.., AND AT DEF4 TO
;UPDATE AN EXISTING SYMBOL.
DEF3: MOVEI W1,USYMP ;IT ALL WORKED, MAKE OUR WORKING COPY
PUSHJ P,DECSYA ; OFFICIAL BY DECREMENTING UNDEF PTR
JRST DMER1 ;BUT... BUT...
PUSH P,SYM ;IF APPENDING, NEED TO UPDATE THE MODULE
MOVX R,<RADIX50 0,PAT..> ; LENGTH FOR THE MODULE "PAT.."
MOVEM R,SYM ;SAVE WHERE NAMSRH CAN FIND IT
PUSHJ P,NAMSRH ;LOOK UP PAT.. IN THE TABLE
JRST DEF3A ;NOT THERE, GIVE UP
PUSHJ P,FETSYM ;GET ITS VALUE WORD
JRST DEF3A ;NOT ACCESSIBLE?
JUMPGE T,DEF3A ;DON'T IF COUNT IS 0 (OLD LINK BUG)
SUB T,[2,,0] ;COUNT ANOTHER SYMBOL
PUSHJ P,DEPSYM ;STORE NEW VALUE
JFCL ;??
DEF3A: POP P,SYM ;RESTORE SYM FOR DEF4
TXNN F,HSYMF ;CHANGING HISEG TABLE?
TDZA R,R ;NO, POINT TO 0'TH WORD OF LOWSEG TABLE
MOVX R,1B0 ;YES, POINT TO 0'TH WORD OF HISEG TABLE
DEF4: MOVX T,GLOBL
IOR T,SYM
PUSHJ P,DSYMER
MOVE T,LLIMIT
ADDI R,1
PUSHJ P,DSYMER
;FALL THROUGH TO NEXT PAGE
;NOW TO SEARCH THE UNDEFINED TABLE, LOOKING FOR REFERENCES TO THIS SYMBOL.
;IF WE FIND ANY, FIX UP THE LOCATION(S) THEY POINT TO, AND REMOVE THEM
;FROM THE UNDEFINED TABLE.
DEF5: PUSHJ P,EVALU ;SEARCH UNDEFINED TABLE
POPJ P, ;NOT FOUND, ALL DONE
SKIPL R,T ;ADDITIVE OR CHAINED FIXUP?
JRST DEF7 ;CHAINED, GO HANDLE
MOVE W2,R ;GET A COPY OF THE FIXUP FLAGS
ANDX R,VMADR ;REDUCE R TO 30-BIT ADDRESS
PUSHJ P,FETCHV ;GET OBJECT CELL
JRST ERR
TXNN W2,STNEG ;ADDITIVE OR SUBTRACTIVE?
SKIPA S,LLIMIT ;ADDITIVE
MOVN S,LLIMIT ;SUBTRACTIVE
TXNE W2,STLH ;RIGHT OR LEFT HALF?
JRST [ HRLZS S ;LEFT HALF
ADD T,S ;ADD INTO LEFT HALF
JRST DEF6]
ADD S,T ;RIGHT HALF, ADD HALVES
HRR T,S ; AND REPLACE RIGHT HALF
DEF6: ;DO FIXUPS RIGHT IN TOPS-10 MONITOR
IFN FTFILE&FTDEC10,< ;PEEK BEFORE POKE
SKIPE FILING ;POKING MONITOR?
JRST DEF60 ;NO, SKIP AHEAD
PUSH P,T ;SAVE NEW WORD TO POKE
PUSHJ P,FETCHV ;YES, GET CURRENT WORD IN MONITOR
JRST ERR ;PEEK FAILED
MOVEM T,POKBLK+1 ;PUT INTO POKE. BLOCK
POP P,T ;RESTORE T
DEF60:
> ;END IFN FTFILE&FTDEC10
PUSHJ P,STOREV ;STORE RESULT BACK INTO MEMORY
JRST ERR ;FAILED
JRST DEF8 ;GO REMOVE SYMBOL AND TRY AGAIN
DEF7: MOVE S,R ;COPY INITIAL FIXUP ADDRESS
DEF7A: JUMPE S,DEF8 ;IF CHAIN REACHES 0, WE'RE DONE
PUSHJ P,FETCHV ;GET OBJECT CELL
JRST ERR
HRRZ S,T ;SAVE CHAIN POINTER
HRR T,LLIMIT ;REPLACE WITH NEW VALUE
PUSHJ P,STOREV ;AND STORE BACK INTO MEMORY
JRST ERR ;FAILED
HRR R,S ;LOOP IN-SECTION TO END
JRST DEF7A ; OF CHAIN
DEF8: PUSHJ P,REMUN
JRST ERR ;CAN'T MODIFY SYMTAB
JRST DEF5
;HERE ON A NAME$: COMMAND -- OPEN A MODULE'S SYMBOL TABLE
NAMSET: TXNE F,Q2F ;2ND QUANTITY TYPED?
SKIPA TT,WRD2D ;YES, FETCH IT
SETZ TT, ;NO, DEFINITELY OURS
JUMPN TT,NAMTYP ;IF NOT $0:, GO SEE IF $1:
TXNE F,FAF!SAF!TIF!COMF!PTF!MF ;MOST ARGS BEFORE $0: ARE ILLEGAL
JRST ERR ;RESERVE THEM
TXNE F,QF ;ANYTHING TYPED?
JRST NAMS2 ;YES, SET NEW MODULE
SETZM PRGM ;NO, JUST CLEAR CURRENT MODULE
SETZM SEGNAM ;AND HISEG IT CAME FROM
IFN FTSCSH,<
JRST CLRCSH> ;CLEAR SYMBOL TABLE CACHE
IFE FTSCSH,<
POPJ P,>
;HERE TO SET A NEW MODULE NAME.
NAMS2: PUSHJ P,NAMSRH ;SEARCH FOR THE NAME
JRST UNDEF ;NOT FOUND
IFN FTSCSH,< ;ONLY IF USING SYMBOL TABLE CACHE
PUSHJ P,CLRCSH ;FOUND IT, CLEAR THE SYMBOL TABLE CACHE
> ;END OF IFN FTSCSH
MOVEM R,PRGM ;STORE AS NEW OPEN MODULE
JUMPGE R,CPOPJ ;DONE IF R POINTS TO LOW SEG
MOVEI R,.JBHNM ;POINTS TO HI SEG, POINT TO SEGMENT NAME
PUSHJ P,HFETCH ;GET IT
SETZ T, ;NO HI SEG, OR EXEC MODE
MOVEM T,SEGNAM ;STORE SEGMENT NAME FOR SYMCHK
POPJ P, ;DONE
;HERE TO TYPE OUT CURRENT OPEN MODULE NAME
NAMTYP: SOJN TT,NAMLST ;IF NOT $1:, SEE IF $2:
TXNE F,QF!FAF!SAF!SF ;MOST ARGS ILLEGAL FOR $1:
JRST ERR ;RESERVE THEM
SKIPN T,PRGM ;IS THERE AN OPEN MODULE?
POPJ P, ;NO, JUST RETURN
SOS R,T ;POINT TO FIRST WORD OF SYMBOL ENTRY
PUSHJ P,FETSYM ;GET THE WORD
JRST ERR ;CAN'T HAPPEN
PUSH P,T ;SAVE OVER TOUT CALL
MOVEI T,"/" ;SEPARATE TEXT FROM COMMAND
PUSHJ P,TOUT ; WITH A SLASH
POP P,W2 ;GET SYMBOL BACK
PUSHJ P,PSYM ;TYPE IT OUT
SKIPG PRGM ;HISEG MODULE?
SKIPN T,SEGNAM ;WITH A NAME?
POPJ P, ;NO OR NO, ALL DONE
MOVEM T,LWT ;YES, SAVE IT AWAY
PUSHJ P,TTAB ;SEPARATE THE NAMES
PJRST SIXBP ;AND GO TYPE THE HISEG NAME
;HERE FOR $2: TO LIST ALL KNOWN MODULES
NAMLST: SOJN TT,ERR ;$2: WAS YOUR LAST CHANCE
TXNE F,QF!FAF!SAF!SF ;MOST ARGS ILLEGAL FOR $2:
JRST ERR ;RESERVE THEM
PUSHJ P,SYMCHK ;MAKE SURE OF SYMBOLS BEFORE HFETCH
MOVEI R,.JBHNM ;OFFSET FOR HISEG NAME
PUSHJ P,HFETCH ;GET THE NAME
SETZ T, ;NONE THERE
MOVE W,T ;SAVE THE HISEG NAME FOR LATER USE
PUSHJ P,SYMSET ;SETUP TO SEARCH THE SYMBOL TABLE
SOJ R, ;ACCOUNT FOR AOSGE BELOW
PUSHJ P,TCRLF ;START AT LEFT MARGIN
;HERE TO GET NEXT MODULE
NAMLS2: AOSGE R ;IF OUT OF SYMBOLS IN THIS TABLE,
PUSHJ P,ADVSYM ;THEN ADVANCE THE POINTER
SKIPA T,@SYPTR ;GET NEXT VALUE WORD
JRST DD1 ;DONE WITH LISTING
HLRE T,T ;GET -VE LENGTH OF THIS TABLE
SOSGE R ;BACK OFF TO MODULE NAME WORD
PUSHJ P,ADVSYM ;ADVANCING IF NECESSARY
SKIPA W2,@SYPTR ;GET THE NAME
JRST ERR ;VALUE BUT NO NAME IS BAD FORMAT
TXNE W2,PNAME ;MUST LOOK LIKE A MODULE NAME
JRST ERR ;ELSE IS BAD FORMAT
ADD R,T ;BACKUP POINTER TO NEXT MODULE
SKIPN T ;ZERO IS PAT.. BEFORE LINK BUG WAS FIXED,
MOVNI R,2 ;SO SET TO ADVANCE TABLES
PUSHJ P,PSYM ;TYPE THE MODULE NAME
TXNE F,HSYMF ;IF NOT HISEG,
SKIPN W ;OR NAME NOT KNOWN,
JRST NAMLS3 ;SKIP TYPING THE SEGMENT NAME
MOVE W1,TOHPS ;GET CURRENT HPOS
SUBI W1,7 ;GET -VE DISTANCE UNTIL WE'VE PADDED ENOUGH
MOVEI T," " ;LOAD UP A SPACE
PUSHJ P,TOUT ;TYPE ONE
AOJL W1,.-1 ;PAD UNTIL DONE
MOVE W1,W ;GET THE SEGMENT NAME
PUSHJ P,TSIXN ;TYPE IT IN SIXBIT
NAMLS3: PUSHJ P,TCRLF ;END THE LINE
JRST NAMLS2 ;TYPE ALL KNOWN MODULES
;HERE ON $$: COMMAND -- READ PDV NAME AND SET $5M
IFN FTEX20!FTMON!<FTDEC10&FTFILE>,<PDVSET==ERR> ;ILLEGAL IN MONITORS, -10
IFE FTEX20!FTMON!<FTDEC10&FTFILE>,<
PDVSET:
IFN FTFILE,<
SKIPE FILING ;MUST BE LOOKING AT A FILE
SKIPN EXEFMT ;IN .EXE FORMAT
JRST ERR ;OR WE CAN'T DO IT
> ;END IFN FTFILE
IFN FTEXEC,<
SKPUSR ;MUST BE IN USER MODE
JRST ERR ;OR WE CAN'T DO IT
> ;END IFN FTEXEC
TXNE F,Q2F ;$$1: ?
SKIPA T,WRD2D ;MAYBE, GET THE FLAG
SETZ T, ;NO, IT'S OURS
JUMPN T,PDVTYP ;IF NOT $$0:, GO SEE IF $$1:
TXNE F,FAF!SAF!TIF!COMF!PTF!MF ;MOST ARGS BEFORE $$0: ARE ILLEGAL
JRST ERR ;BAD SYNTAX
IFN FTDEC20,<
TXZ F,CF!TXF ;CLEAR SOME FLAGS FOR TEXI
XMOVEI T,1(P) ;STORE PDV NAME ON STACK
MOVEM T,TEM ;REMEMBER WHERE
MOVEM T,WRD ;KEEP AN ORIGINAL COPY
ADJSP P,PVNMSZ ;MAKE ROOM FOR NAME
ADDI T,PVNMSZ-1 ;GET LAST ADDRESS OF BLOCK
MOVEM T,TEM1 ;SAVE THAT TOO
MOVEI T,7 ;NORMAL ASCII BYTE SIZE
> ;END IFN FTDEC20
IFN FTDEC10,<
TXZ F,ROF!TXF ;CLEAR SOME FLAGS FOR TEXI
MOVEI T,6 ;BYTE SIZE FOR SIXBIT TYPEIN
> ;END IFN FTDEC10
MOVEM T,WRD2D ; FOR BUILDING BYTE POINTERS
TXNN F,QF ;IF NO ARG,
JRST TEXI1 ;GO READ THE STRING
SETZ T, ;GET A NULL
IDPB T,CHP ;FINISH THE SYMBOL TYPEIN
IFN FTDEC20,<
DMOVE TT,OPTXT ;GET THE TEXT
DMOVEM TT,@WRD ;PUT IT WHERE WE LOOK FOR IT
MOVE R,TEM1 ;POINT PAST THE COPIED OPTXT
;FALL INTO PDVSE2
> ;END IFN FTDEC20
IFN FTDEC10,<
MOVE TT,[POINT 7,OPTXT] ;SOURCE BYTE POINTER
MOVE W2,[POINT 6,W] ;DESTINATION BYTE POINTER
SETZ W, ;CLEAR ACCUMULATOR
PDVSE1: ILDB T,TT ;GET SOURCE BYTE
JUMPE T,PDVSE2 ;DONE AT END OF STRING
SUBI T," " ;CONVERT TO SIXBIT
IDPB T,W2 ;APPEND TO SEGMENT NAME
JRST PDVSE1 ;LOOP OVER THE PROPOSED NAME
> ;END IFN FTDEC10
;HERE AFTER THE STRING HAS BEEN READ IN
PDVSE2:
IFN FTDEC20,<
CAMG R,TEM1 ;PAST END OF BLOCK?
MOVEM W,(R) ;NO, STORE END OF STRING
MOVEI R,377 ;RIGHT-MOST BYTE
ANDCAM R,@TEM1 ;MAKE SURE WE'RE ASCIZ
IFE FTFILE,< ;FIRST THE NON-FILDDT CASE
PUSHJ P,PDVINI ;SET UP PDVOP% ARG BLOCK
MOVEI T1,.POLOC ;LOCATE FUNCTION
XMOVEI T2,PDVARG ;ADDRESS OF ARG BLOCK
HRRO T3,WRD ;MAKE A BYTE POINTER TO PDV NAME
PDVOP% ;FIND THE PDV
ERJMP ERR ;SOMETHING DIED, GUESS IT'S NOT THERE
SKIPN PDVARG+.POCT2 ;ANYTHING FOUND?
JRST ERR ;NO, DON'T DIDDLE ANYTHING
ADJSP P,-PVNMSZ ;RECLAIM STACK SPACE
MOVE T1,PDVA ;GET THE PDVA
MOVEM T1,SYTLOC ;SET $5M
SETZM SYMVAL ;DON'T TRUST IT
PJRST SYMCHK ;GO CHECK IT OUT NOW
> ;END IFE FTFILE
;STILL IFE FTEX20!FTMON!<FTDEC10&FTFILE> AND IFN FTDEC20
;FILDDT CASE AFTER THE STRING HAS BEEN READ IN
;FALL IN FROM PDVSE2
IFN FTFILE,<
SKIPG W1,PDVNUM ;ANY PDVS EXIST?
JRST ERR ;NO, DON'T BOTHER LOOKING
SETO W2, ;START WITH FIRST ONE
PDVSE3: PUSHJ P,NXTPDV ;GET THE PDVA
ADDI R,.PVNAM ;GET NAME ENTRY
PUSHJ P,FETCH ;GRAB THE WORD
JRST ERR ;NAUGHTY!
TXNE T,IFIW ;IS NAME POINTER LOCAL?
HLL T,R ;YES, SET REAL SECTION NUMBER
MOVE R,T ;MOVE INTO RIGHT AC
SKIPN @WRD ;USER TYPE NULL STRING?
JRST [ JUMPE R,PDVSE5 ;YES, ZERO ADDRESS IS A MATCH
PUSHJ P,FETCH ;FETCH FIRST STRING WORD
JRST ERR ;BAD POINTER
TLNN T,774000 ;IS FIRST BYTE ZERO?
JRST PDVSE5 ;YES, STRING IS NULL
JRST PDVSE4] ;NO, TRY TRY AGAIN
JUMPE R,PDVSE4 ;ZERO ADDRESS WILL NEVER MATCH
MOVE T,WRD ;USER'S STRING ADDRESS
PUSHJ P,CMPSTR ;COMPARE NAMES
PDVSE4: SOJG W1,PDVSE3 ;NO MATCH, TRY AGAIN
JUMPE W1,ERR ;DIDN'T FIND ANY MATCHES
PDVSE5: MOVE T,@PDVTBL ;MATCHED, GET THE PDVA
MOVEM T,SYTLOC ;SET $5M
ADJSP P,-PVNMSZ ;RECLAIM STACK SPACE
JRST MASK5C ;GO TRADE SYMBOL TABLES
;STILL IFE FTEX20!FTMON!<FTDEC10&FTFILE> AND IFN FTDEC20 AND IFN FTFILE
;CMPSTR -- COMPARE TWO ASCIZ STRINGS
;CALL:
; MOVX T,<GLOBAL ADDRESS OF INTERNAL STRING>
; MOVX R,<GLOBAL ADDRESS OF PROG'S STRING>
; PUSHJ P,CMPSTR
;RETURNS +1: STRINGS NOT IDENTICAL
; +2: STRINGS IDENTICAL
;USES ONLY TT,TT1,TT2
CMPSTR: PUSHJ P,SAVRST ;AS ADVERTISED
PUSH P,W1 ;SAVE SOME MORE ACS
PUSH P,W2
TLO T,610000 ;MAKE GLOBAL "POINT 7,"
MOVE W1,T ;SAVE IN ANOTHER AC
CMPST1: MOVE W2,[POINT 7,T] ;MAKE A POINTER FOR PROG
PUSHJ P,FETCH ;GET A WORD OF PROG'S STRING
JRST ERR ;SIGH....
MOVEI TT,5 ;FIVE BYTES TO A WORD
CMPST2: ILDB TT1,W1 ;GET SOME BYTES
ILDB TT2,W2 ; TO LOOK AT
CAIL TT1,"a" ;SEARCH MUST BE
CAILE TT1,"z" ; CASE INSENSITIVE
CAIA ;DON'T CONVERT
TRC TT1,40 ;CONVERT
CAIL TT2,"a" ;SEARCH MUST BE
CAILE TT2,"z" ; CASE INSENSITIVE
CAIA ;DON'T CONVERT
TRC TT2,40 ;CONVERT
CAME TT2,TT1 ;SAME?
JRST CMPST4 ;NO, ALL DONE
JUMPE TT1,CMPST3 ;LOOP UNLESS WE GOT A NULL
SOJG TT,CMPST2 ;LOOP THROUGH THIS WORD
AOJA R,CMPST1 ;TRY NEXT WORD
CMPST3: AOS -2(P) ;SUCCESS!!
CMPST4: POP P,W2 ;RESTORE THE ACS
POP P,W1
POPJ P, ;ALL DONE
> ;END IFN FTFILE
;STILL IFE FTEX20!FTMON!<FTDEC10&FTFILE> AND IFN FTDEC20
;HERE TO TYPE OUT CURRENT PDV NAME
PDVTYP: SOJN T,PDVLST ;IF NOT $$1:, SEE IF $$2:
TXNE F,QF!FAF!SAF!SF!LTF ;NO ARGS DEFINED
JRST ERR ;RESERVE THEM
SKIPG R,SYTLOC ;PDV OR JOBDAT?
POPJ P, ;JOBDAT, DON'T TYPE ANYTHING
ADDI R,.PVNAM ;POINT TO NAME WORD
PUSHJ P,FETCH ;GET THE POINTER
JRST ERR ;CAN'T DO IT
JUMPE T,CPOPJ ;AIN'T ONE
TXNE T,IFIW ;LOCAL POINTER?
HLL T,R ;YES, GET REAL ADDRESS
PUSH P,LLOCO ;TYPZ WILL BOMB THIS
MOVEM T,LLOCO ;WHERE TYPZ EXPECTS ADDR
PUSHJ P,TYPZ ;TYPE USER STRING
POP P,LLOCO ;RESTORE ADDRESS
POPJ P, ;ALL DONE
PDVLST: SOJN T,ERR ;$$2: WAS YOUR LAST CHANCE
TXNE F,QF!FAF!SAF!SF!LTF ;NO ARGS DEFINED
JRST ERR ;RESERVE THEM
PUSHJ P,TCRLF ;START OFF AT LEFT MARGIN
IFN FTFILE,< ;FILDDT CASE
SKIPG W1,PDVNUM ;IF NO PDVS,
JRST DD1 ;END COMMAND NOW
SETO W2, ;SETUP TO GET THE FIRST ONE
> ;END IFN FTFILE
IFE FTFILE,< ;NON-FILDDT SETUP
PUSHJ P,PDVINI ;SETUP THE ARG BLOCK
SETZM PDVA ;START FROM THE BEGINNING
PUSHJ P,NXTPDV ;GET THE FIRST PDVA
HLRZ W1,PDVARG+.POCT2 ;SEE HOW MANY PDVS EXIST
JUMPE W1,DD1 ;GET OUT NOW IF NONE
TRNA ;KEEP THIS ADDRESS FIRST TIME THROUGH
> ;END IFE FTFILE
PDVLS1: PUSHJ P,NXTPDV ;GET NEXT ADDRESS
ADDI R,.PVNAM ;OFFSET TO THE NAME POINTER
PUSHJ P,FETCH ;GET NAME POINTER
SETZ T, ;SIGH
TXNE T,IFIW ;IF SECTION-LOCAL,
HLL T,R ;MAKE IT GLOBAL
SKIPN R,T ;PUT IN RIGHT REGISTER
JRST PDVLS3 ;ZERO NAME ADDRESS MEANS DON'T TYPE IT
PUSHJ P,FETCH ;GET FIRST WORD FROM NAME
SETZ T, ;SIGH
TLNN T,(177B6) ;SEE IF NON-NULL
JRST PDVLS3 ;SKIP NAME IF NULL
PUSH P,W1 ;NO, SAVE SOME NEEDED REGISTERS
PUSH P,W2 ;AROUND TYPZ0
PUSH P,LLOCO ;AND THE OPEN LOCATION
MOVEM R,LLOCO ;FAKE IT OUT
PUSHJ P,TYPZ0 ;TYPE ASCIZ NAME WITHOUT LEADING SLASH
POP P,LLOCO ;RESTORE OPEN CELL ADDRESS
POP P,W2 ;AND PDVTBL INDEX
POP P,W1 ;AND REMAINING COUNT OF PDVS
PUSHJ P,TCRLF ;END THE LINE
PDVLS3: SOJG W1,PDVLS1 ;LOOP OVER ALL KNOWN PDVS
JRST DD1 ;TYPE EXTRA CRLF AND END WHEN DONE WITH LIST
> ;END IFN FTDEC20
;STILL IN FTEX20!FTMON!<FTDEC10&FTFILE>
;HERE FOR TOPS-10 CASES
IFN FTDEC10,<
;REST OF PDVSET FOR TOPS-10
PDVSE2: JUMPE W,[SETZM SYTLOC ;0$5M
SETZM SYMVAL ;MAKE SURE WE CHECK
PJRST SYMCHK] ;GO VALIDATE IT
MOVEM W,SEGOPB+.SGSNM ;SET UP THE SEGMENT NAME
SETZM SEGOPB+.SGSGN ;DON'T KNOW THE NUMBER
SETZM SEGOPB+.SGFLG ;CLEAR THE STEP FLAG
MOVSI W,.SGORG+1 ;GET THE DESIRED LENGTH
HLLM W,SEGOPB ;SET FOR THE UUO
XMOVEI W,SEGOPB ;POINT TO THE ARG BLOCK
SEGOP. W, ;FIND THE SEGMENT
JRST PDVSE3 ;CAN'T DO IT THIS WAY, SEE IF OLD WAY WORKS
HRRZ R,SEGOPB+.SGORG ;GET LOCAL PAGE ORIGIN
LSH R,PG2WRD ;CONVERT TO ADDRESS
JRST PDVSE4 ;HAVE THE HISEG ORIGIN, GO VALIDATE IT
PDVSE3: MOVE W1,SYTLOC ;SAVE THE CURRENT POINTER
SETZM SYTLOC ;MAKE GETHSO LOOK HARD
PUSHJ P,GETHSO ;SEE IF WE HAVE A HISEG ORIGIN
MOVEM W1,SYTLOC ;RESTORE CURRENT $5M
JUMPE T,ERR ;NO HISEG
MOVE R,T ;COPY THE POINTER
ADDI R,.JBHNM ;POINT AT THE SEGMENT NAME
PUSHJ P,FETCHV ;AND GRAB IT
JRST ERR ;NO GO
CAME T,W ;IF NOT THE RIGHT SEGMENT,
JRST ERR ;CAN'T USE IT
TRZ R,PAGMSK ;BACK OFF TO THE ORIGIN AGAIN
;FALL INTO PDVSE4
PDVSE4: ADDI R,.JBHSM ;POINT TO ITS SYMBOL TABLE POINTER
PUSHJ P,FETCHV ;GET ITS SYMBOL LIST
JRST ERR ;NO GO
JUMPE T,[SMERS <No symbols> ;SAY WHAT'S WRONG
JRST ERR] ;AND PUNT
SKIPG T ;IF GLOBAL POINTER, JUST USE IT
MOVE T,R ;NO, USE ADDRESS OF IOWBLK POINTER
MOVEM T,SYTLOC ;SET AS $5M ARGUMENT
SETZM SYMVAL ;DON'T TRUST IT YET
PJRST SYMCHK ;GO VALIDATE IT
PDVTYP: SOJN T,PDVLST ;IF NOT $$1:, SEE IF $$2:
TXNE F,QF!FAF!SAF!SF!LTF ;NO ARGS DEFINED
JRST ERR ;RESERVE THEM
SKIPG R,SYTLOC ;GET ADDRESS OF SYMBOL TABLE
POPJ P, ;BE SILENT IF JOBDAT FORMAT
PUSHJ P,CHKADR ;SEE IF WE KNOW ITS BITS
TXNE TT,PG$HGH ;MUST BE PART OF A HISEG
TXNE TT,PG$SPY ;AND NOT A SPY-SEG
POPJ P, ;WRONG, TYPE NOTHING
PUSHJ P,GETHSO ;GET THE START OF ITS SEGMENT
JUMPE T,CPOPJ ;SHOULD NEVER HAPPEN....
MOVE R,T ;COPY THE ADDRESS
ADDI R,.JBHNM ;POINT TO ITS NAME WORD
PUSHJ P,FETCHV ;GET ITS NAME
JRST ERR ;THIS IS BAD NEWS
MOVE W1,T ;COPY THE NAME TO SOMEWHERE SAFE
MOVEI T,"/" ;INTRODUCER CHARACTER
PUSHJ P,TOUT ;TYPE IT
PJRST TSIXN ;TYPE THE SIXBIT SEGMENT NAME AND RETURN
PDVLST: SOJN T,ERR ;$$2: WAS YOUR LAST CHANCE
TXNE F,QF!FAF!SAF!SF!LTF ;NO ARGS DEFINED
JRST ERR ;RESERVE THEM
PUSHJ P,TCRLF ;START AT LEFT MARGIN
IFE FTFILE,<
SETZM SEGOPB+.SGSGN ;START WITH FIRST SEGMENT
SETZM SEGOPB+.SGSNM ;NAME NOT KNOWN YET
MOVSI R,.SGSNM+1 ;THE DESIRED LENGTH
HLLM R,SEGOPB ;SET UP FOR UUO
MOVX R,SG.STP ;THE STEP FLAG
MOVEM R,SEGOPB+.SGFLG ;SET TO FIND ALL HISEGS
PDVLS1: XMOVEI R,SEGOPB ;POINT AT UUO BLOCK
SEGOP. R, ;GET THE NEXT HISEG
JRST PDVLS3 ;OLD MONITOR?
SKIPN SEGOPB+.SGSGN ;IF NO NEXT SEGMENT NUMBER,
JRST DD1 ;WE'RE DONE
SKIPN W1,SEGOPB+.SGSNM ;IF BLANK NAME,
JRST PDVLS1 ;SKIP THIS SEGMENT
PUSHJ P,TSIXN ;TYPE THE NAME
PUSHJ P,TCRLF ;END THE LINE
JRST PDVLS1 ;LOOP OVER ALL KNOWN SEGMENTS
> ;END IFE FTFILE
PDVLS3: MOVEI R,.JBHNM ;OLD MONITOR
PUSHJ P,HFETCH ;TRY FOR NAME OF THE ONLY HISEG
JRST DD1 ;NONE AT ALL
JUMPE T,DD1 ;DON'T BOTHER WITH A BLANK NAME
MOVE W1,T ;POSITION FOR TYPEOUT
PUSHJ P,TSIXN ;TYPE THE NAME
PUSHJ P,TCRLF ;END THE LINE
JRST DD1 ;END THE COMMAND
> ;END IFN FTDEC10
> ;END IFE FTEX20!FTMON!<FTDEC10&FTFILE>
;TEXT COMMANDS: $n"c$, $n"/.../, XXXX$5"
; "X$ (same as $7c$),
; $"X$ ($6c$),
; "/.../ ($7"/.../),
; $"/.../ ($6"/.../)
TEXI: MOVEI T,7 ;START OFF AS "X$ OR "/.../
TXNE F,CF ;<ESC> SEEN?
SOS T ;YES, CHANGE TO $"X$ OR $"/.../
TXZN F,Q2F ;NUMBER AFTER <ESC>?
MOVEM T,WRD2D ;NO, SIMULATE CORRECT VALUE.
MOVE T,WRD2D ;GET THE BYTE WIDTH.
CAIL T,5 ;WIDTH MUST BE BETWEEN 5 AND
CAILE T,^D36 ;36 INCLUSIVE.
JRST ERR
CAIN T,5 ;XXXX$5" ?
JRST [ MOVE T,SYM ;YES, TAKE PREVIOUS SYL AS RADIX50
TXZ F,FPF!FEF!LTF ;REINIT SYL
JRST QUAN1]
CAIE T,6 ;SIXBIT?
TXZ F,CF ;NO, CLEAR <ESC> SEEN FLAG.
TXO F,TXF ;FLAG PROCESSING TEXT
MOVE T,LLOCO ;GET ADR OF OPEN REG
MOVEM T,TEM ;SAVE IT FOR LOCAL USE
TEXI1: PUSHJ P,TIN ;GET TERMINATOR
MOVEM T,SYL ;SAVE TERMINATOR
PUSHJ P,TIN ;GET FIRST CHARACTER
IFE FTEX20!FTMON!<FTDEC10&FTFILE>,< ;IF USER MODE -20 OR -10,
TXNN F,TXF ;IN TEXT COMMAND?
JRST TEXI4 ;NO, SKIP TEST
> ;END IFE FTEX20!FTMON!<FTDEC10&FTFILE>
TXNN F,CCF ;DOUBLE-ESCAPE MEANS NO SINGLE-CHARACTER MODE
CAIE T,.CHESC ;ESC?
JRST TEXI4 ;NO, HANDLE AS TEXT
MOVE T,SYL ;YES, RESTORE THE CHARACTER
PUSHJ P,TEXIN1 ;CONVERT TO SIXBIT IF NECESSARY
JRST QUAN1 ;EQUALS ONE ASCII/SIXBIT CHAR
TEXI4: MOVE W1,WRD2D ;FETCH BYTE SIZE
LSH W1,^D24 ;SHIFT BYTE SIZE TO PROPER PLACE
IOR W1,[POINT 0,W] ;BUILD THE REST OF THE BYTE POINTER
SETZ W, ;INIT WORD TO 0
TEXI2: CAMN T,SYL ;REACHED TERMINATOR?
JRST [ MOVE R,TEM ;LAST ADDRESS
IFE FTEX20!FTMON!<FTDEC10&FTFILE>,< ;MONITORS DON'T HAVE PDVS
TXNN F,TXF ;PDV NAME?
JRST PDVSE2 ;YES, GO CHECK IT OUT
> ;END IFE FTEX20!FTMON!<FTDEC10&FTFILE>
MOVEM R,LLOC ;SET LOC TO END OF INPUT
MOVEM R,LLOCO ;UPDATE LLOCO TOO
MOVE T,W ;GET LAST WORD
JRST QUAN1] ;NO, DONE
IBP W1 ;POINT TO NEXT BYTE.
TRNE W1,^-W ;STILL POINTING TO W?
JRST TEXI3 ;NO
PUSHJ P,TEXIN1 ;CONVERT TO SIXBIT IF NECESSARY
DPB T,W1 ;BYTE GOES INTO W.
PUSHJ P,TIN ;GET ANOTHER INPUT CHARACTER
JRST TEXI2
;HERE WHEN WORD FULL
TEXI3: MOVEI W1,W ;ONLY GET HERE ONCE IF NO LOC OPEN
MOVE R,TEM ;GET LOC OF NEXT REGISTER
IFE FTMON!FTEX20!FTDEC10,< ;NO REAL PDV ON A -10 OR -20 MONITORS
TXNN F,TXF ;IF READING A PDV NAME
JRST [ CAMLE R,TEM1 ;PAST END OF BLOCK?
JRST TEXI2 ;YES, STOP STORING
MOVEM W,(R) ;NO, STORE THE WORD
JRST TEXI5] ;AND CONTINUE
> ;END IFE FTMON!FTEX20!FTDEC10
TXNN F,ROF ;REGISTER OPEN?
JRST TEXI2 ;NO, LOSE ANY ADDITIONAL INPUT
PUSH P,T ;SAVE CHARACTER
MOVE T,W ;GET FULL WORD
PUSHJ P,DMEMER ;STORE WORD IF POSSIBLE
POP P,T ;RECOVER CHARACTER
TEXI5: AOS TEM ;BUMP LOC
JRST TEXI4 ;GO REINIT WORD AND CONTINUE INPUT
;CONVERT INPUT CHARACTER TO SIXBIT IF NECESSARY
TEXIN1: TXNN F,CF ;SIXBIT MODE?
POPJ P, ;NO
CAIL T,"A"+40 ;IS CHAR BETWEEN LOWER CASE "A" AND
CAILE T,"Z"+40 ; LOWER CASE "Z"?
SKIPA ;NO
TRC T,40 ;YES, CONVERT TO UPPER CASE
CAIL T," " ;IS CHAR IN SIXBIT SET?
CAILE T,"_"
JRST ERR ;NO
ANDI T,77 ;YES, MASK TO 6 BITS
TRC T,40 ;CONVERT TO SIXBIT FORM
POPJ P,
;DDT EXIT AND RESTART COMMANDS (^C, ^E, AND ^Z)
;FIRST, THE NON-FILDDT CASE
IFE FTFILE,<
CNTRLZ:
IFN FTEXEC,<
SKPUSR ;SEE IF USER MODE
JRST ERR ;NO--ERROR
> ;END IFN FTEXEC
IFN FTMON,<
MOVE T,[MSEC1,,MRETN]> ;MDDT RETURN
IFN FTEX20,<
MOVEI T,DDTCZ> ;KDDT USER-MODE RETURN
IFE FTMON!FTEX20,<
XMOVEI T,HLTA ;NORMAL DDT RETURN
IFN FTUD20,< ;NO STUB EXCEPT USER-20
SKIPGE R,SECUDD ;IS THERE A STUB?
JRST CTLZ1 ;NO
HRRI R,770003 ;RETURN @770003 OF STUB
PUSHJ P,FETCH ;GET THE ADDRESS
JRST ERR ;CAN'T??
HLL T,R ;FIX UP SECTION NUMBER
CTLZ1:
> ;END IFN FTUD20
> ;END IFE FTMON!FTEX20
JRST GO1 ;RESTORE CONTEXT AND JUMP
;HERE AFTER ^Z WITH ALL BREAKPOINTS INSERTED AND CONTEXT RESTORED.
IFE FTMON,<
HLTA:
IFN FTDEC10,<
EXIT 1,> ;TOPS-10 MONRET
IFN FTDEC20,<
HALTF%> ;TOPS-20 MONRET
JRST DDT ;CONTINUE IS LIKE START NOW
> ;END IFE FTMON
CNTRLE==ERR ;^E ONLY WORKS IN FILDDT
> ;END IFE FTFILE
;NOW THE FILDDT CASE
IFN FTFILE,<
CNTRLZ: JRST CTLZ ;JUMP TO REAL ROUTINE
CNTRLE: JRST CTLE ;JUMP TO REAL ROUTINE
> ;END IFN FTFILE
SUBTTL COMMAND ROUTINES -- CLASS 2
;*************** START OF CLASS TWO COMMANDS ***************
MULT: TXOA F,PTF!MLF ;*
DIVD: TXO F,DVF!PTF ;SINGLE QUOTE
JRST L1
SUBTTL COMMAND ROUTINES -- CLASS 3
;*************** START OF CLASS THREE COMMANDS ***************
ASSEM: JRST LIS2 ;#
MINUS: TXO F,MF
PLUS: TXO F,PTF
JRST LIS2
LPRN: PUSH P,F ;RECURSE FOR OPEN PAREN
PUSH P,ACCCF ;PUSH COMMACOMMA FLAG/VALUE
PUSH P,WRD
PUSH P,FRASE
PUSH P,FRASE1
AOS PRNC
SETZM WAKALL ;SET WAKEUP SET TO PUNCT AND CTRLS
JRST LIS0C ;AND READ NEW EXPRESSION
INDIRE: HRLZI W,20 ;@
IORB W,WRD
TXO F,QF
JRST LIS2
ACCF: MOVE R,ESTUT ;GET UNDEFINED PROCESSOR SO FAR
CAME R,USYMP+S$ADR ;ANY UNDEFINED'S CREATED YET?
JRST ERR ;YES, ERROR
;(CAN ONLY GET HERE ON "FOO#," ETC.)
MOVE R,T ;COMMA PROCESSOR
TXOE F,COMF ;COMMA TYPED BEFORE?
JRST ACCF1 ;YES
HRRZM R,ACCCF ;NO, SAVE POTENTIAL "A" OF "A,,B"
HLLZ T,R
LDB W1,[POINT 3,WRD,2] ;CHECK FOR IO INSTRUCTION
CAIE W1,7 ;7XX?
JRST ACCF0 ;NO, ASSUME AC FIELD
MOVX W1,774B11 ;YES, CHECK DEVICE CODE FIELD
TDNE W1,WRD ;DEVICE CODE FILLED IN YET?
ACCF0: TDZA W1,W1 ;YES, OPCODE WAS UMOVE, RDTIME, ETC.
; ASSUME AC FIELD
MOVEI W1,1 ;NO, OPCODE WAS CONO, DATAO, ETC.
; ASSUME DEVICE CODE
LSH R,27(W1) ;MOVE QUANTITY TO CORRECT FIELD
ADD T,R
ADDB T,WRD
JRST SPACE1
ACCF1: HRRZ T,ACCCF ;RETRIEVE "A" OF "A,,B" EXPRESSION
ADD T,WRD ;FOR ",," GET LEFT HALF TOGETHER
HRLZM T,WRD ; AND PUT IT IN LEFT HALF
HRROM T,ACCCF ;FLAG COMMACOMMA CONSTRUCTION
JRST SPACE1
SUBTTL COMMAND ROUTINES -- CLASS 4
;*************** START OF CLASS FOUR COMMANDS ***************
SPACE: TXO F,SPF ;(E.G., "JRST PAT..") FLAG SPACE TYPED
SPACE1: TXO F,TIF ;FLAG TRUNCATE (ADD MOD 2**18)
TXZ F,MF!PTF
JRST LIS1
RPRN: TXNN F,QF ;)
SETZ T,
MOVS T,T
SOSGE PRNC
JRST ERR
POP P,FRASE1
POP P,FRASE
POP P,WRD
POP P,ACCCF ;POP COMMACOMMA FLAG/VALUE
POP P,F
TXNE F,PTF
TXNE F,SF
JRST RPRN1
MOVEM T,SYL
TXO F,QF!SF
JRST L1RPR
RPRN1: ADDB T,WRD
TXO F,QF
JRST L1A
SUBTTL COMMAND ROUTINES -- CLASS 5
;*************** START OF CLASS FIVE COMMANDS ***************
;CRLF AND OPEN NEXT REGISTER SUBROUTINE
LI0: PUSHJ P,TCRLF ;TYPE <CR><LF>
JRST LINEF0 ;JOIN COMMON CODE
;"^" COMMAND - CLOSE CURRENT AND OPEN PREVIOUS SEQUENTIAL LOCATION
VARRW: PUSHJ P,DEPRA ;^
PUSHJ P,TCRLF ;TYPE <CR><LF>
MOVE T,LLOC
HRRI T,-1(T) ;DECREMENT CURRENT LOC
JRST LI1 ;JOIN COMMON CODE
;<LF> COMMAND, CLOSE CURRENT AND OPEN NEXT SEQUENTIAL LOCATION
LINEF: PUSHJ P,DEPRA ;NEXT REGISTER
PUSHJ P,TCR ;DO CR ONLY
LINEF0: MOVE T,LLOC ;BUMP LOC
HRRI T,1(T) ;BUT DON'T CHANGE SECTION
LI1: MOVEM T,LLOC ;NEW LAST LOCATION
MOVEM T,LLOCO ;NEW LAST LOCATION OPEN
LI1P: PUSHJ P,PADR ;PRINT AS ADDRESS
MOVEI T,"/" ;"/" TO INDICATE OPEN ADDRESS
CAME SCH,SCHM ;TEMP MODE SAME AS PERM?
JRST [ CAIN SCH,FTOC ;NO, CONSTANT?
MOVEI T,"[" ;YES - INDICATE "[" MODE
CAIE SCH,PINQ ;EITHER KIND OF
CAIN SCH,PIN ;INSTRUCTION?
MOVEI T,"]" ;YES - INDICATE "]" MODE
JRST .+1] ;USE APPROPRIATE INDICATION
TXNE F,STF ;SUPPRESSING OUTPUT?
MOVEI T,"!" ;YES - THEN OVER-RIDE WITH "!" MODE
PUSHJ P,TOUT ;TELL USER WHAT IS HAPPENING
LI2: PUSHJ P,TTAB ;TYPE A <TAB>
TXO F,ROF ;MARK REGISTER OPEN
TXNE F,STF ;SUPPRESS TYPEOUT OF LOCATION?
POPJ P, ;YES, DONE
MOVE R,LLOCO ;GET ADDRESS OF OPEN LOC
MOVEI W1,"?" ;TYPE ? IF FETCH FAILS
PUSHJ P,FETCH ;FETCH CONTENTS
JRST TEXT ;CAN'T -- GO TYPE ?
PJRST CONSYM ;LIST CONTENTS OF OPEN LOC
;<CR> COMMAND - CLOSE CURRENT LOCATION
CARR: PUSHJ P,DEPRA ;CLOSE REGISTER
PUSHJ P,TIN ;GLOBBLE UP FOLLOWING LINEFEED
SETZM CHINP ;REINIT INPUT LINE
SETZM CHINC
TXZ F,STF ;DON'T SUPPRESS TYPEOUT ANYMORE
MOVE T,LLOC ;GET CURRENT LOC
TXNE F,CF ; $ PRECEEDED?
JRST LI1 ;YES, GO OPEN REGISTER
JRST DD1.5 ;NO, JUST GO AWAIT COMMAND
SUBTTL COMMAND ROUTINES -- CLASS 6
;*************** START OF CLASS SIX COMMANDS ***************
SUBTTL COMMAND ROUTINES -- REGISTER DEPOSIT AND OPEN
;"\" COMMAND - OPEN NEW LOCATION, PRESERVING PC SEQUENCE
ICON: PUSHJ P,DEPRA0 ;BACKSLASH
PUSHJ P,CEFFAD ;COMPUTE EFF ADR
JRST ERR ;MEMORY READ ERROR
JRST SLASH4 ;JOIN COMMON CODE
;<TAB> COMMAND - OPEN NEW LOCATION, BREAKING PC SEQUENCE
TAB: PUSHJ P,DEPRA0 ;OPEN REGISTER OF Q
PUSHJ P,CEFFAD ;COMPUTE EFF ADR
JRST ERR ;MEMORY READ ERROR
HRRI T,-1(T) ;CAUSE LI0 AOS'S LLOC
PUSHJ P,PSHLLC ;PUSH OLD SEQUENCE
MOVEM T,LLOC ;SETUP NEW SEQUENCE
JRST LI0 ;JOIN COMMON OPEN/TYPEOUT CODE
;"[" COMMAND - OPEN LOCATION IN CONSTANT TYPEOUT MODE
OCON: TXNE F,QF ;QUANT TYPED?
MOVEI SCH,FTOC ;YES, CHANGE TEMP MODE TO CONSTANT
TRO F,LF1+CF1 ;OPEN AS CONSTANT
JRST SLASH ;TYPE
;"]" COMMAND - OPEN LOCATION IN SYMBOLIC TYPEOUT MODE
OSYM: TXNE F,QF ;QUANT TYPED?
MOVEI SCH,PIN ;YES, CHANGE TEMP MODE TO INSTRUCTION
TRZ F,CF1 ;OPEN SYMBOLICALLY
TROA F,LF1 ; . . .
;SKIP/FALL INTO SLASH ROUTINE
;"!" COMMAND - OPEN LOCATION SUPPRESSING TYPEOUT OF CONTENTS
SUPTYO: TXOA F,STF ;SUPPRESS TYPEOUT
;SKIP/FALL INTO COMMON CODE
;"/" COMMAND - OPEN A NEW LOCATION IN CURRENT TYPEOUT MODE
SLASH: TXZ F,STF ;TYPE OUT NOT SUPPRESSED
PUSHJ P,CEFFAD ;COMPUTE EFF ADR
JRST ERR ;MEMORY READ ERROR
TXNN F,QF ;USING LWT?
JRST SLASH4 ;YES. DO NOT CHANGE MAIN SEQUENCE
PUSHJ P,PSHLLC ;PUSH OLD SEQUENCE
MOVEM T,LLOC ;SETUP NEW SEQUENCE
SLASH4: MOVEM T,LLOCO ;SET NEW OPEN LOCATION
JRST LI2 ;AND GO HANDLE TYPEOUT
;CEFFAD - CALCULATE ADDRESS ARGUMENT FOR "/", "!", ETC.
;CEFFAS - CALCULATE ADDRESS ARGUMENT FOR $G, ETC. (SECTION DEFAULT ONLY)
;CALL IS:
;
; MOVX T,<ADDR>
; PUSHJ P,CEFFAD
; ERROR RETURN
; NORMAL RETURN
;
;WHERE <ADDR> IS THE EXPLICITLY-TYPED ADDRESS EXPRESSION (IF ANY).
;
;BASICALLY ADDRESSING NOW WORKS AS FOLLOWS:
;
; FOR CEFFAD (E.G., "/", <TAB>, ETC.) ONLY: IF AN EXPLICIT QUANTITY HAS
; NOT BEEN TYPED BY THE USER THEN THE LAST WORD TYPED IS USED AS THE BASIS
; FOR ADDRESS CALCULATION. IF THE COMMAND WAS PREFIXED WITH A SINGLE <ESC>
; (E.G., $/) THEN THE FULL-WORD VALUE FROM ABOVE WILL BE TREATED AS AN
; INSTRUCTION-FORMAT-INDIRECT-WORD (IFIW) WHOSE EFFECTIVE ADDRESS "E" WILL
; BE CALCULATED AS IT WOULD BE BY THE HARDWARE WERE IT TO EXECUTE THE WORD
; AS AN INSTRUCTION (ASSUMING A VALID OPCODE); IF THE COMMAND IS PRECEDED
; WITH A DOUBLE <ESC> (E.G., $$/) THEN THE FULL WORD VALUE FROM ABOVE WILL
; BE TREATED AS AN EXTENDED-FORMAT-INDIRECT-WORD (EFIW) WHOSE EFFECTIVE
; ADDRESS "E" WILL BE CALCULATED AS IT WOULD BE BY THE HARDWARE WERE IT TO
; ENCOUNTER THE WORD AS AN INDIRECTED WORD IN AN EFFECTIVE ADDRESS CALCULA-
; TION IN A NON-ZERO SECTION.
;
; IF THE COMMAND WAS NOT PREFIXED BY ANY <ESC>'S, AND IF NO EXPLICIT QUANTITY
; WAS TYPED, THEN THE ADDRESS VALUE (THE LAST WORD TYPED) IS REDUCED TO A
; SECTION-LOCAL ADDRESS VALUE (I.E., RH ONLY, THE LH IS ZEROED).
;
; FOR CEFFAS (E.G., $G) AND CEFFAD (FROM ABOVE): IF ",," WAS USED IN THE
; ADDRESS EXPRESSION THEN THE ADDRESS VALUE IS EXACTLY AS TYPED BY THE USER;
; OTHERWISE IF EITHER A SPACE OR COMMA WAS USED IN THE ADDRESS EXPRESSION,
; OR IF THE ADDRESS EXPRESSION IS A SECTION-LOCAL VALUE (AS ABOVE) THEN THE
; SECTION-VALUE (LEFT HALF) OF THE ADDRESS VALUE WILL BE DEFAULTED FROM THE
; CURRENT SECTION (I.E., LH OF ".").
;
;NOTE: IF A DDT-INTERNAL ADDRESS VALUE WAS USED IN THE ADDRESS EXPRESSION
; (LEGAL ONLY FOR CEFFAD, ERROR FOR CEFFAS-CLASS COMMANDS) THEN THE
; ADDRESS VALUE IS ASSUMED TO BE A SECTION-LOCAL VALUE IN DDT'S
; EXECUTING SECTION. THE VALUE IS FLAGGED "DDT-INTERNAL", AND LEFT
; FOR FETCH/ETC TO ACTUALLY PROCESS.
;
;IF A FETCH ERROR OCCURS, OR AN ILLEGAL EFIW WORD IS ENCOUNTERED IN AN
;EFFECTIVE-ADDRESS CALCULATION, OR IF A DDT-INTERNAL ADDRESS IS SUPPLIED
;TO CEFFAS, THE ERROR RETURN IS TAKEN; OTHERWISE THE SUCCESSFUL (SKIP)
;RETURN IS TAKEN WITH THE 36-BIT GLOBAL ADDRESS VALUE IN REGISTER T.
;
;USES ACS R, S, W.
;CALCULATE EFFECTIVE ADDRESS
CEFFAD: TXNE F,DDLF ;DDT INTERNAL LOCATION TYPED?
JRST [HRLI T,(DDAF) ;YES, FLAG IN ADDRESS
JRST CPOPJ1] ;DO NOTHING ELSE
TXNN F,QF ;EXPLICIT ADDRESS EXPRESSION TYPED?
MOVE T,LWT ;NO, USE LAST WORD TYPED
TXNE F,CCF ;DOUBLE <ESC> TYPED?
JRST CEFFE ;YES, EFIW ADDRESS CALCULATION
TXNE F,CF ;SINGLE <ESC> TYPED?
JRST CEFFI ;YES, IFIW ADDRESS CALCULATION
TXNN F,QF ;EXPLICIT ADDRESS EXPRESSION TYPED?
ANDI T,-1 ;NO, REDUCE TO SECTION-LOCAL LWT
;ENTER HERE TO GENERATE SECTION DEFAULT ADDRESS VALUE
CEFFAS: TXNE F,DDLF ;DDT INTERNAL LOCATION TYPED?
POPJ P, ;YES - TSK TSK - BOMB THE KLOWN
SKIPGE ACCCF ;COMMACOMMA PROCESSING ENCOUNTERED?
JRST CEFFAZ ;YES, USE ADDRESS VALUE EXACTLY AS IT WAS TYPED
TDNN T,[777777,,777760] ;ADDRESS VALUE A "LOCAL REGISTER"?
JRST CEFFAC ;YES, CHECK NEED FOR GLOBAL REFERENCE
; NOTE THAT "1,,REG" WILL BE HANDLED "RIGHT"
; BY FETCH/ET AL, AND WILL ALSO SET THE
; DEFAULT SECTION TO "1" . . . CAVEAT EMPTOR
TXNN F,SPF!COMF ;SPACE OR COMMA TYPED (I.E., AN INSTRUCTION)?
TLNN T,-1 ;OR IS THE VALUE SECTION-LOCAL (LH = 0)?
JRST CEFFS5 ;YES, DEFAULT THE SECTION
TXNN T,77B5 ;IS THE LH OBVIOUSLY NOT A SECTION NUMBER?
JRST CEFFAZ ;ASSUME IT'S A SECTION NUMBER
CEFFS5: HLL T,LLOCS ;GET DEFAULT ADDRESS VALUE SECTION
SKIPL PDFSEC ;OVER-RIDING DEFAULT SECTION ($6M) SET?
HLL T,PDFSEC ;YES, IT OVERRIDES LLOCS DEFAULT
CEFFAZ: HLLZM T,LLOCS ;SET NEW DEFAULT SECTION
JRST CPOPJ1 ;RETURN WITH ADDRESS VALUE IN T
CEFFAX: PUSHJ P,CEFFAS ;CALCULATE SECTION DEFAULT (IF NEEDED)
JFCL ;IGNORE NON-SKIP RETURN
POPJ P, ;AND RETURN NON-SKIP ALWAYS
CEFFAC: HLL T,LLOCS ;GET CURRENT DEFAULT SECTION
TLZE T,-1 ;IS THIS GLOBAL?
TLO T,1 ;YES, FLAG IT
JRST CPOPJ1 ;RETURN SUCCESS TO CEFFAD
;GDFSEC -- GET DEFAULT SECTION NUMBER
; PUSHJ P,GDFSEC
; T/ <DEFAULT SECTION>,,0
GDFSEC: SETZ T, ;SECTION NUMBER ONLY
GDFSE0: HLL T,LLOCS ;USE TEMP DEFAULT
SKIPL PDFSEC ;PERM. DEFAULT SET?
HLL T,PDFSEC ;YES, USE PERM. DEFAULT
POPJ P,
;SETUP TO CALCULATE IFIW EFFECTIVE ADDRESS
CEFFI: HLLZ S,LLOCS ;PRELOAD (FAKE) CURRENT SECTION
CEFFIX: MOVEI W,INDPTH ;MAX LOOP COUNT FOR INDIRECTION
MOVEM W,TEM ;SO WE DON'T GET CAUGHT
;CALCULATE IFIW
CIFIW: PUSH P,T ;SAVE FOR LATER INDIRECTION CHECK
MOVEM T,LASEAF ;ALSO SAVE FOR JRSTF BITS IN $X
SETZM EAGLOB ;IFIW'S GIVE LOCAL RESULTS
HRRZ W,T ;IFIW: Y FIELD (18 BITS)
LDB R,[POINT 4,T,17];IFIW: X FIELD
HLL T,S ;GLOBAL ADR IN CASE ONLY INDIRECTION
JUMPE R,CIFIW6 ;SKIP INDEXING IF NO INDEX REGISTER
;DO IFIW INDEXING
MOVE T,AC0(R) ;FETCH THE INDEX REGISTER
MOVEM T,LASEAF ;SAVE FOR JRSTF BITS IN $X
MOVE R,T ;SCRATCH COPY
JUMPE S,CIFIW2 ;IF SECTION 0 INDEX
JUMPL R,CIFIW2 ;OR LH(X) .LT. 0
TLNN R,-1 ;OR LH(X) .EQ. 0
CIFIW2: TLZA T,-1 ;THEN ONLY 18-BITS OF INDEXING
HRRE W,W ;ELSE SIGN-EXTEND Y TO 36-BITS
ADD T,W ;DO THE INDEXING
JUMPE S,CIFIW4 ;IF SECTION 0
JUMPL R,CIFIW4 ;OR LH(X) .LT. 0
TLNN R,-1 ; OR LH(X) .EQ. 0
JRST CIFIW4 ;THEN LOCAL INDEXING
SETOM EAGLOB ;ELSE GLOBAL INDEXING
CAIA ;DON'T DIDDLE SECTION
CIFIW4: HLL T,S ;THEN E STAYS IN LOCAL SECTION
ANDX T,VMADR ;KEEP ONLY Y FIELD
HLL S,T ;UPDATE S TO NEW CURRENT SECTION
;CHECK IFIW INDIRECTION
SKIPE EAGLOB ;LOCAL INDEXING?
TDNN T,[777776,,777760] ;NO, GLOBAL REFERENCE TO AC
CIFIW6: TRNE T,777760 ;IS LOCAL REFERENCE TO A REGISTER?
CAIA ;NO, MEM. REF.
ANDI T,17 ;YES, REDUCE TO UNAMBIGUOUS AC
; (NOTE "SECTION-NESS" STILL IN S)
POP P,R ;GET BACK ORIGINAL WORD
TXNN R,@ ;IFIW I BIT ON?
PJRST CEFIW9 ;NO, CHECK OUT AC'S AND RETURN
CIFIW8: MOVE R,T ;YES, ADDRESS OF NEW ADDRESS
PUSHJ P,FETCH ;GO GET INDIRECTED WORD
POPJ P, ;CAN'T ACCESS WORD, DIE
SOSG TEM ;INFINITE LOOP?
POPJ P, ;APPARENTLY, GO COMPLAIN AT USER
CIFIW9: JUMPE S,CIFIW ;ONCE IN SECTION 0, ALWAYS IN SECTION 0
JUMPGE T,CEFIW ;IF BIT 0 .EQ. 0 THEN EFIW
TXNN T,1B1 ;BIT 0 AND BIT 1 ON?
JRST CIFIW ;JUST BIT 0, IFIW FORMAT
POPJ P, ;ILLEGAL COMBINATION
;SETUP TO CALCULATE EFIW EFFECTIVE ADDRESS
CEFFE: HLLZ S,LLOCS ;PRE-LOAD CURRENT SECTION
CEFFEX: MOVEI W,INDPTH ;MAX LOOP COUNT FOR INDIRECTION
MOVEM W,TEM ;SO WE DON'T GET CAUGHT
JRST CIFIW9 ;DISPATCH ON TYPE OF INDIRECTION
;EFIW FORMAT
CEFIW: PUSH P,T ;SAVE FOR LATER INDIRECTION CHECK
SETOM EAGLOB ;EFIW'S GIVE GLOBAL RESULTS
LDB R,[POINTR T,EFIWX] ;EFIW: X FIELD
ANDX T,VMADR ;Y FIELD ONLY
MOVE W,T
JUMPE R,CEFIW6 ;SKIP INDEXING IF NO INDEX REGISTER
;DO EFIW INDEXING
MOVE T,AC0(R) ;GET INDEX REGISTER
ADD T,W ;INDEX THE Y FIELD
ANDX T,VMADR ;KEEP ONLY Y FIELD
;CHECK EFIW INDIRECTION
CEFIW6: POP P,R ;GET BACK ORIGINAL WORD
HLLZM T,LLOCS ;SAVE SECTION
HLLZ S,T ;SAVE FOR CEFIW9
TXNE R,EFIWI1 ;EFIW I BIT ON?
JRST CIFIW8 ;YES, LOOP ON INDIRECTION
;NO, CHECK OUT AC'S AND RETURN
;CHECK AC ADDRESSING
CEFIW9: TDNN T,[-2,,-20] ;AC REFERENCE?
TLNN S,-1 ;FROM NON-ZERO SECTION?
JRST CPOPJ1 ;NO, JUST RETURN IT
HRLI T,1 ;YES, MAKE IT GLOBAL
JRST CPOPJ1 ;RETURN SUCCESS FROM CEFFAD
;HERE WHEN REGISTER CLOSED TO DEPOSIT NEW CONTENTS AND SET NEXT LOCATION
DEPRA: TXNE F,CF ;$ PRECEEDED?
PUSHJ P,POPLLC ;YES, POP OLD SEQUENCE
DEPRA0: TXNE F,ROF ;IF REGISTER IS BEING CHANGED
TXNN F,QF ;REMOVE ALL PREVIOUS UNDEFINED
JRST DEPRS ;SYMBOL REFERENCES TO IT
DMOVE TT,USYMP+S$ADR ;GET POINTER TO ALL OLD UNDEF ITEMS
SUB W2,TT1 ;FIND OUT HOW MANY NEW ONES THERE ARE
JUMPE W2,DEPRA4 ;DON'T UPDATE IF NO NEW SYMS
DMOVEM TT,ESTUT ;FAKE OUT USYSET
MOVEI W1,USYMP ;WANT TO UPDATE UNDEF BY THAT MANY
PUSHJ P,DECSYP ;DECREMENT EVERYBODY
JFCL ;??
DEPRA4:
IFN FTFILE,<
SKIPN FILING ;SEE IF /M
JRST DEPRS ;YES--NO UNDEF FIXUPS
> ;END IFN FTFILE
MOVEM T,LWT ;SAVE T IN LWT, DEPRS DOES IT ANYWAY
DEPRA1: PUSHJ P,USYSET ;SETUP TO SEARCH UNDEFINEDS
ADDI R,1 ;WANT VALUE WORDS THIS TIME
DEPRA2: SOSGE R ;ANY MORE SYMBOLS?
PUSHJ P,ADVSYM ;MAYBE, MAKE SURE
SKIPA W,@SYPTR ;YES, GET VALUE WORD
JRST DEPRA6 ;ALL DONE, GO DO THE STORE
JUMPG W,DPRS3 ;1B0=0 IMPLIES CHAINING
LDB T,[POINTR W,VMADR] ;GET ADDRESS OF FIXUP
SKIPE T ;DELETE ENTRY IF ADR=0, OR
CAMN T,LLOCO ; IF ADR IS BEING CHANGED
DEPRA3: SKIPA W1,R2IDX ;WANT TO DELETE IT, FORM SYM INDEX
SOJA R,DEPRA2 ;KEEP IT, GET NEXT VALUE
ADD W1,R ;SYM INDEX NOW IN W1
SUBI W1,1 ;POINT TO 1ST WORD OF SYMBOL PAIR
PUSHJ P,REMUN ;GET RID OF THE SYMBOL
JRST DEPRA6 ;CAN'T, SKIP ALL THIS
JRST DEPRA1 ;RESTART, SINCE REMUN CALLED SYWSET
DEPRA6: MOVE T,LWT ;RESTORE QUANTITY
JRST DEPRS ;DO THE STORE
;HERE IF THE UNDEFINED SYMBOL REQUESTS A CHAINED FIXUP.
DPRS3: PUSH P,R ;SAVE R OVER ALL THIS
SETO S, ;FLAG TO USE DEPSYM
JUMPE W,DEPRA8 ;DON'T BOTHER IF POINTS TO ZERO
MOVE W1,W ;INITIALIZE W1 SO EXCH WILL WORK
MOVE R,W ;FIRST TIME GET FULL ADDRESS
JRST DPRS5 ;ALLOW CHAIN TO N,,0
DPRS4: HRR R,W ;GET NEXT ADR (AFTER ADR IN W1)
TRNN R,-1 ;CHAIN REACHED 0?
JRST DEPRA8 ;YES, ALL DONE
DPRS5: PUSHJ P,FETCHV ;GET CONTENTS OF ADR IN R
JRST DEPRA8 ;****UNDEFINED SYMBOL TABLE OR FIXUP
; CHAIN POINTS TO ILL. MEM. TRY
; TO CONTINUE.
EXCH T,W ;W/NEW LINK T/OLD LINK
EXCH W1,R
CAME W1,LLOCO ;IS THIS WORD BEING CHANGED?
AOJA S,DPRS4 ;NO, CHECK REST OF CHAIN
HRR T,W ;YES, PATCH CHAIN AROUND ADDRESS
JUMPL S,DPRS6 ;FIRST ENTRY?
PUSHJ P,DMEMER ;NO, WRITE INTO USER ADDRESS SPACE
JRST DEPRA8 ;CHECK REST OF UNDEFINEDS
DPRS6: POP P,R ;FIRST LINK IN CHAIN - GET SYMBOL ADDR.
TRNN T,-1 ;CHAIN OF LENGTH 1?
JRST DEPRA3 ;YES, JUST DELETE THE SYMBOL
TXO R,1B1 ;CHAIN STARTS IN UNDEFINED TABLE
PUSHJ P,DSYMER ;NO, PATCH CHAIN AROUND MODIFIED ADDR.
TXZ R,1B1 ;WANT A STRAIGHT INDEX AGAIN
SOJA R,DEPRA2 ;CONTINUE
DEPRA8:
IFN FTEX10,<
PUSHJ P,SYMSPC ;MAKE SURE AFTER FETCHL AND DMEMER
> ;END IFN FTEX10
POP P,R ;RESTORE R
SOJA R,DEPRA2 ;GET NEXT SYMBOL
;ROUTINES TO HANDLE RING BUFFER OF LOCATIONS
;'PUSH' CURRENT LOCATION
PSHLLC: AOS TT,SAVLP ;BUMP POINTER
CAIL TT,NSAVTB ;AT END OF TABLE?
SETZB TT,SAVLP ;YES, WRAPAROUND
PUSH P,LLOC ;GET CURRENT LOCATION
POP P,SAVLTB(TT) ;ADD IT TO TABLE
POPJ P,
;'POP' CURRENT LOCATION
POPLLC: MOVE TT,SAVLP ;GET POINTER
MOVE TT,SAVLTB(TT) ;REMOVE FROM TABLE
MOVEM TT,LLOC ;SET AS CURRENT LOC
TDNE TT,[-2,,-20] ;SKIP IF LOC IS ACCUMULATOR.
HLLZM TT,LLOCS ;SET FLOATING DEFAULT SECTION.
SOS TT,SAVLP ;DECREMENT PTR
JUMPGE TT,POPLC1 ;AT TOP OF TABLE?
MOVEI TT,NSAVTB-1 ;YES, WRAPAROUND
MOVEM TT,SAVLP
POPLC1: POPJ P,
SUBTTL COMMAND ROUTINES -- RETYPE LAST QUANTITY
SEMIC: MOVEM T,LWT ;SEMICOLON TYPES IN CURRENT MODE
JRST (SCH)
EQUAL: TROA F,LF1+CF1 ;=
UNDRL: TRZ F,CF1 ;_
TRO F,LF1
PUSHJ P,CONSYM
JRST RET
SUBTTL COMMAND ROUTINES -- TYPEOUT MODE CONTROL
TEXO: MOVEI T,7 ;$T, ASSUME 7 BIT ASCII
TXNE F,Q2F ;IF $NT,
MOVE T,WRD2D ;GET "RADIX" OF TEXT
JUMPE T,TYPZ ;TYPE ASCIZ STRING AT "." IF $0T/$$0T
CAIN T,7 ;CHECK FOR $7T
MOVEI R,TEXTT ;SET MODE SWITCH FOR 7-BIT ASCII
CAIN T,6 ;CHECK FOR $6T
MOVEI R,SIXBP ;SET MODE SWITCH FOR SIXBIT ASCII
CAIN T,5 ;CHECK FOR $5T
MOVEI R,R50PNT ;SET MODE SWITCH FOR RADIX 50
CAIN T,1 ;CHECK FOR $1T
MOVEI R,TBPNT ;SET MODE SWITCH FOR BYTE POINTERS
JUMPN R,SMOD1 ;SET MODE IF ONE DETERMINED YET
CAIL T,7 ;NOT DETERMINED, CHECK BYTE SIZE
CAILE T,^D36 ;MUST BE 7 TO 36
JRST ERR ;BAD BYTE SIZE
MOVEI R,TEXTNT ;MODE IS N-BIT ASCII
MOVEM T,BYSS ;SAVE BYTE SIZE
JRST SMOD1 ;GO SET MODE
;TYPE THE ASCIZ STRING AT CURRENTLY OPEN LOCATION
TYPZ: MOVEI T,"/" ;LOAD A SLASH
PUSHJ P,TOUT ;SEPARATE TEXT FROM USER COMMAND
MOVE T,WRD ;GET ADDRESS, IF SUPPLIED
TXNN F,QF ;EXPLICIT ADDRESS GIVEN?
SKIPA T,LLOCO ;NO, USE "."
PUSHJ P,CEFFAX ;YES, DEFAULT SECTION IF NEEDED
MOVEM T,LLOCO ;SAVE NEW "."
MOVE R,T ;GET LAST LOCATION OPEN
TYPZ0: PUSHJ P,LISTEN ;ANY USER TYPEIN?
SKIPA W,[POINT 7,W1] ;NO, CONTINUE AND LOAD ASCII BYTE PTR.
POPJ P, ;YES, EXIT
MOVEI W2,5 ;LOAD LOOP COUNTER
PUSHJ P,FETCH ;FETCH 5 CHARACTERS FROM ADDRESS
JRST ERR ;FAILED
MOVE W1,T ;PUT WORD IN T
TYPZ1: ILDB T,W ;GET THE NEXT BYTE
JUMPE T,[AOS LLOCO ;YES, INCREMENT TO NEXT WORD
POPJ P,] ;DONE
PUSHJ P,TOUT ;NO, TYPE THE CHARACTER
SOJG W2,TYPZ1 ;LOOP UNTIL DONE
AOS R,LLOCO ;DONE, GO TO NEXT WORD IN STRING
JRST TYPZ0 ;AND KEEP DOING IT
HWRDS: MOVEI R,HLFW ;H - HALFWORD OUTPUT FORMAT
JRST SMOD1
SFLOT: MOVEI R,TFLOT ;F - FLOATING POINT OUTPUT FORMAT
IFN FTDEC20,<
TXNN F,Q2F> ;WAS AN ARGUMENT GIVEN TOO?
JRST SMOD1 ;NO, NORMAL $F OR $$F FORMAT
IFN FTDEC20,< ;DBL. PRECISION TYPEOUT ONLY ON TOPS-20
SKIPE TT,WRD2O ;YES, WAS IT 0?
CAIN TT,1 ;OR A 1?
JRST SMOD1 ;YES, TREAT LIKE $F OR $$F
CAIE TT,2 ;NO, WAS IT 2?
JRST ERR ;NO, DON'T KNOW WHAT IT WAS
MOVEI R,DFLOUT ;YES, LOAD DBL. PRECISION ADDR.
JRST SMOD1
> ;END IFN FTDEC20
SYMBOL: MOVEI R,PIN ;ASSUME REGULAR SYMBOL TYPEOUT
SKIPE WRD2D ;$1S?
MOVEI R,PINQ ;YES, OPTYPE FIRST FLAVOR
JRST SMOD1 ;NO, KEEP OUR ASSUMPTION
CON: MOVEI R,FTOC ;C TYPEOUT FORMAT
SMOD1: HRRZM R,SCH
JRST BASE1
RELA: TRZE F,Q2F ;CHANGE ADDRESS MODE TO RELATIVE
JRST BASECH
MOVEI R,PADSO-TOC
ABSA: ADDI R,TOC ;A
HRRZM R,AR
JRST BASE1
BASECH: MOVE T,WRD2D ;$NR CHANGE OUTPUT RADIX TO N, N .GT. 1
CAIGE T,2
JRST ERR
HRRZM T,ODF
BASE1: TXNN F,CCF
JRST LIS1
MOVS S,[XWD SCHM,SCH] ;SAVE SPACE IN LITERAL POOL
BLT S,ODFM ;WITH $$, MAKE MODES PERMANENT
MOVE S,SVBTS ;MAKE THE CURRENT FORMAT MASK
MOVEM S,PSVBTS ;THE PERMANENT FORMAT MASK.
MOVE S,BYSS
MOVEM S,PBYSS
JRST RET
;BYTE COMMAND AND TYPEOUT ROUTINES
BITO: TRZN F,Q2F ;DOES <N> EXIST FOR $<N>O?
JRST BITO5 ;NO, DEFAULT TO CURRENT MASK
SETZB W2,SVBTS ;MAKE ROOM FOR A NEW MASK
MOVEI W1,1 ;PROTOTYPE BIT
MOVN T,WRD2D ;FOR SHIFTING THE PROTOTYPE BIT
BITO2: LSHC W1,(T) ;POSITION TO A BYTE BOUNDRY
IORM W2,SVBTS ;MARK NEXT BYTE BOUNDRY
JUMPN W2,BITO2 ;LOOP FOR ALL BYTES
BITO5: MOVEI SCH,BITT ;BYTE TYPEOUT
PJRST BASE1 ;HANDLE $$ IF NEED BE . . .
;HERE FOR ACTUAL BYTE TYPEOUT
BITT: PUSH P,LWT ;SAVE LAST WORD TYPED . . .
SKIPN T,SVBTS ;GET CURRENTLY PREVAILING $O MASK
MOVE T,BYTMSK ;BLANK, USE $3M MASK INSTEAD
IORI T,1B35 ;BIT 35 ALWAYS MARKS END OF A BYTE
PUSH P,T ;SET WORKING COPY OF MASK
PUSH P,LWT ;WORKING COPY OF WORD TO BE TYPED
JRST BITT4 ;ENTER LOOP
BITT2: MOVEI T,"," ;SEPARATE BYTES WITH A COMMA
PUSHJ P,TOUT ;TYPE IT OUT
BITT4: POP P,T ;[REMNANTS OF] WORD TO BE TYPED
POP P,W1 ;[REMNANTS OF] BYTE MASK
JFFO W1,.+3 ;GET NEXT COUNT OF BITS
POP P,LWT ;DONE, RESTORE LWT FOR OTHERS
POPJ P, ;RETURN
LSH W1,1(W2) ;UPDATE MASK
PUSH P,W1 ;SAVE AWAY FOR NEXT ROUND
LSHC T,-^D36+1(W2) ;GET NEXT BYTE TO BE TYPED
MOVEM T,LWT ;SET IN COMMON STORAGE PLACE
PUSH P,W1 ;SAVE REMAINING BYTES FOR NEXT ROUND
PUSHJ P,TOCA ;TYPE OUT A CONSTANT
SKIPE -1(P) ;MORE BYTES COMING UP?
JRST BITT2 ;YES, TYPE A COMMA
JRST BITT4 ;NO, CLEAN UP STACK AND LEAVE
SUBTTL COMMAND ROUTINES -- LIMITS AND PATCHING
LLIM: TXNE F,CF!CCF ;$< OR $$< COMMAND?
JRST PTCHB ;YES, PATCH COMMAND
MOVEM T,LLIMIT ;NO, SET FIRST ARGUMENT
TXO F,FAF ;AND FLAG FIRST ARGUMENT SEEN
MOVEM F,LLREGF ;SAVE "F" FOR SETUP/LLMSEC/CEFFAS
MOVE TT1,ACCCF ;ALSO SAVE "ACCCF" FLAG
MOVEM TT1,LLACCF ; FOR SETUP/LLMSEC/CEFFAS
JRST ULIM1
ULIM: TXNE F,CCF ;$$> ?
JRST ERR ;YES, NOT DEFINED
TXNE F,CF ;NO, $> ?
JRST PTCHE ;YES, END PATCH
MOVEM T,ULIMIT ;NO, SET SECOND ARG
TXO F,SAF ;AND FLAG SECOND ARGUMENT SEEN
MOVEM F,ULREGF ;SAVE "F" FOR SETUP/ULMSEC/CEFFAS
MOVE TT1,ACCCF ;ALSO SAVE "ACCCF" FLAG
MOVEM TT1,ULACCF ; FOR SETUP/ULMSEC/CEFFAS
ULIM1: TXNN F,QF
JRST ERR
JRST LIS0E
;HERE FOR THE PATCH BEGIN COMMAND
PTCHB: TXNE F,Q2F ;SPECIAL FLAVOR?
JRST PTCHX ;YES, CANCEL PATCHING MAYBE
SKIPN PTLOC ;ALREADY IN PATCH MODE?
TXNN F,ROF ;OR NO LOCATION OPEN?
JRST ERR ;YES, CAN'T PATCH
SETZM PTORG ;NO, ASSUME EXPRESSION TYPED
TXNE F,TIF!COMF!PTF!MF ;EXPRESSION TYPED?
JRST PTCHB4 ;YES, JUST GO USE IT
TXNE F,QF ;ANYTHING AT ALL TYPED?
TXNE F,LTF ;NUMBER OR SYMBOL?
CAIA ;NOTHING OR SYMBOL TYPED
JRST PTCHB4 ;NUMBER, JUST GO USE IT
TXNE F,QF ;ANYTHING TYPED?
JRST [ PUSHJ P,EVAL ;YES, LOOKUP SYMBOL
JRST ERR ;STRANGE TYPEIN, LOSE
JRST PTCHB2] ;FOUND, USE VALUE AS PATCH LOC
MOVSI W,-NPSYM ;SETUP TO SCAN PATCH SYMBOLS
PTCHB1: MOVE T,PCHSYM(W) ;GET A POSSIBLITY
MOVEM T,SYM ;SET IT UP FOR EVAL
PUSHJ P,EVAL ;TRY TO FIND VALUE
AOBJN W,PTCHB1 ;NOT FOUND, TRY NEXT SYMBOL
JUMPL W,PTCHB2 ;FOUND A SYMBOL, USE IT
IFN FTEXEC,<
SKPUSR ;USER MODE?
JRST ERR ;EXEC MODE LOSES HERE
> ;END IFN FTEXEC
MOVEI R,.JBFF ;NONE OF THE SYMBOLS EXIST, USE .JBFF
HLL R,LLOCO ;IN THE PATCH SECTION
PUSHJ P,FETCH ;GET CONTENTS OF .JBFF
JRST ERR ;USER LOSES
AOS PTORG ;PTORG = 1 TO FLAG FROM .JBFF
JRST PTCHB4 ;FAKE PATCH SYMBOL FOUND
PTCHB2: SETOM PTORG ;PTORG = -1 TO FLAG A SYMBOL
MOVE R,SYM ;GET SYMBOL BEING USED
MOVEM R,PTSYM ;SAVE FOR CLOSING PATCH LATER
AOS R,W1 ;POINT TO VALUE WORD
PTCHB4: CAIL T,.JBDA ;HAVE REASONABLE PATCH ADDRESS?
TDNN T,[777776,,777760] ;CAN'T BE AN AC
JRST ERR ;NO
TLNN T,-1 ;SECTION GIVEN?
JRST PTCHB5 ;NO, SKIP THE CHECK
HLLZ TT,T ;YES, SEE IF THAT SECTION
CAMN TT,LLOCS ; IS SECTION OF "."
JRST PTCHB5 ;YES, GO ON
SMERS <CAN'T PATCH ACROSS SECTIONS> ;SET MESSAGE
PTCHBE: SETZM PTLOC ;PATCH NEVER BEGAN
JRST DMER1 ;ALTERNATE DMEMER ENTRY (ERR MSG)
PTCHB5: MOVEM T,PTVAL ;SAVE ORIGINAL SYMBOL VALUE
HLL T,LLOCO ;FORCE SECTION SAME AS OPEN REG
MOVEM T,PTLOC ;YES, SAVE IT
MOVEM R,PTFIX ;SAVE WHERE IT CAME FROM
MOVE R,LLOCO ;LOC OF OPEN REGISTER
MOVEM R,PTLLC ;SAVE IT
PUSHJ P,FETCH ;GET CONTENTS
JRST ERR ;FETCH FAILED
MOVEM T,PTWRD ;SAVE ORIGINAL WORD
PUSHJ P,DEPMEM ;TRY TO DEPOSIT INTO MEMORY
JRST PTCHBE ;FAILED, STOMP ON THE PATCH
SETZM PTAFTR ;ASSUME PATCH BEFORE
TXNE F,CCF ;SAVE BEFORE/AFTER FLAG
SETOM PTAFTR ;0 MEANS BEFORE, -1 MEANS AFTER
PUSHJ P,TCRLF ;OUTPUT <CR><LF>
MOVE T,PTLOC ;START OF PATCHING AREA
PUSHJ P,LI1 ;OPEN LOCATION AND TYPEOUT
SKIPL PTAFTR ;PATCH BEFORE OR AFTER?
POPJ P, ;BEFORE, DONE FOR NOW
MOVE R,LLOCO ;CURRENT OPEN LOCATION
MOVE T,PTWRD ;ORIGINAL INSTRUCTION
PUSHJ P,DMEMER ;PUT AS FIRST IN PATCH AREA
PUSHJ P,LI2 ;NOW TYPE OUT SO USER CAN SEE
PJRST LI0 ;AND OPEN/TYPE NEXT LOCATION
;TABLE OF SYMBOLS IDENTIFYING PATCH AREAS
PCHSYM:
IFN FTEX10,<
RADIX50 0,PAT> ;TOPS-10 MONITOR PATCH AREA
IFN FTEX20!FTMON,<
RADIX50 0,FFF> ;TOPS-20 MONITOR PATCH AREA
RADIX50 0,PAT.. ;USUAL LINK SYMBOL
RADIX50 0,PATCH ;ANOTHER LIKELY POSSIBILITY
NPSYM==.-PCHSYM
;HERE FOR THE PATCH END COMMAND
PTCHE: SKIPN PTLOC ;PATCH IN PROGRESS?
JRST ERR ;NO, ERROR
TXZ F,CF ;NO, FLUSH FLAGS BEFORE DEPRA
TXZN F,STF ;DID USER SEE LAST LOC? (CLEAR FLAG FOR LI0)
SKIPE LWT ;AND WAS IT ZERO?
JRST PTCHE0 ;NO, PROCEED
TXNE F,ROF ;REGISTER OPEN?
TXNN F,QF ;AND NOTHING YET TYPED?
SOS LLOC ;YES - DO NOT STORE A 0 WORD.
PTCHE0: PUSHJ P,DEPRA ;STORE LAST WORD IF ANY
SKIPGE PTAFTR ;PATCH BEFORE?
JRST PTCHE1 ;NO
PUSHJ P,LI0 ;OPEN AND TYPE NEXT LOCATION
MOVE R,LLOCO ;CURRENT OPEN LOCATION
MOVE T,PTWRD ;USER ORIGINAL INSTRUCTION
PUSHJ P,DMEMER ;PUT AT END OF PATCH CODE
PUSHJ P,LI2 ;AND TYPE OUT FOR USER TO SEE
PTCHE1: TXNE F,Q2F ;WAS "SKIPNESS" SUPPLIED?
SKIPA T,WRD2D ;YES, USE USER-REQUESTED COUNT
MOVEI T,2 ;NO, DEFAULT SINGLE-SKIP
JUMPE T,PTCHE6 ;DON'T BOTHER IF NOTHING TO DO
PUSH P,T ;ELSE SAVE ITERATION COUNTER
PUSH P,[JUMPA] ;AND BASIC PATCH RETURNER
PTCHE3: PUSHJ P,LI0 ;OPEN AND TYPE NEXT LOCATION
MOVE R,LLOCO ;CURRENT OPEN LOCATION
MOVE T,[Z 1,1] ;INCREMENT
ADD T,(P) ; THE RETURNER
TXNN T,<Z 17,> ;OVERFLOWED THE AC FIELD YET?
HRLI T,(JUMPA 17,) ;YES, LIMIT AT JUMPA 17,
MOVEM T,(P) ;SET BASIC JUMPA TEMPLATE
HRRZ T,PTLLC ;ORIGINAL USER LOCATION
ADD T,(P) ;GENERATE A JUMPA N,C(PTLLC)+N
PUSHJ P,DMEMER ;PUT IN PATCH AREA
PUSHJ P,LI2 ;KEEP USER UPDATED
SOSLE -1(P) ;COMPLETED MAXIMUM SKIPNESS YET?
JRST PTCHE3 ;NO, LOOP TILL DONE
POP P,T ;YES, ADJUST
POP P,T ;STACK POINTER
;CONTINUED ON NEXT PAGE
;FALL IN FROM ABOVE
;NOW TO DECIDE WHAT POINTER (IF ANY) TO UPDATE
PTCHE6: SKIPN PTORG ;ANYTHING TO UPDATE?
JRST PTCHE8 ;NO, GO INSTALL JUMPA TO PATCH
AOS T,LLOC ;GET NEXT FREE PATCH LOC
SKIPG PTORG ;SYMBOL OR .JBFF?
JRST PTCHE7 ;SYMBOL, PROCEED
MOVEI R,.JBFF ;.JBFF, SET UP TO UPDATE IT
HLL R,LLOCO ;IN PATCHED SECTION
PUSH P,T ;SAVE T
HRRZ T,T ;NEW VALUE EXCLUDES SECTION
PUSHJ P,DMEMER ;UPDATE C(.JBFF) ACCORDINGLY
HRRI R,.JBSA ;C(.JBFF) ALSO STORED IN LH(.JBSA)
PUSHJ P,FETCH ;SO GET .JBSA
JRST ERR ;BZZZT?
HRL T,(P) ;NEW LH(.JBSA)
PUSHJ P,DMEMER ;SET AND HOPE FOR BEST
POP P,T ;RESTORE STACK
JRST PTCHE8 ;AND FINISH OFF PATCH
PTCHE7: MOVE R,PTVAL ;GET ORIGINAL SYMBOL VALUE
TLNN R,-1 ;DEFINED WITH SECTION NO.?
HRRZ T,T ;NEW SYMBOL VALUE EXCLUDES SECTION
MOVE R,PTFIX ;WHERE VALUE CAME FROM
PUSHJ P,DSYMER ;DEPOSIT NEW SYMBOL VALUE
MOVE S,PTSYM ;GET SYMBOL USED FOR PATCHING
IFN FTSCSH,< ;ONLY IF USING SYMBOL TABLE CACHE
PUSHJ P,DELCSH ;REMOVE FROM THE SYMBOL TABLE CACHE
> ;END IFN FTSCSH
MOVE S,T ;GET VALUE SYMBOL WAS REDEFINED AS
IFN FTSCSH,< ;ONLY IF USING SYMBOL TABLE CACHE
PUSHJ P,DELCSV ;REMOVE VALUE FROM CACHE TOO
> ;END IFN FTSCSH
PTCHE8: PUSHJ P,TCRLF ;TYPE <CR><LF>
MOVE T,PTLLC ;ORIGINAL USER LOCATION
PUSHJ P,LI1 ;OPEN AND TYPE ORIGINAL LOCATION
MOVE R,LLOCO ;CURRENT OPEN LOCATION
MOVSI T,(JUMPA) ;JUMP TO PATCH AREA INSTRUCTION
HRR T,PTLOC ;ADDRESS OF START OF PATCH
; NOTE ADDRESS IN LOCAL SECTION
PUSHJ P,DMEMER ;PUT IN JUMP INSTRUCTION
PUSHJ P,LI2 ;AND SHOW USER
SETZM PTLOC ;SAY NO PATCH IN PROGRESS
POPJ P, ;DONE
PTCHX: SKIPE WRD2D ;$0< ?
JRST ERR ;NO, UNDEFINED COMMAND
MOVE T,PTLLC ;YES, GET ADDR. OF PATCH INSERT
MOVEM T,LLOC ;DEFINE IT TO BE "."
MOVEM T,LLOCO ;AND LAST LOCATION OPEN
SETZM PTLOC ;DEFINE NO PATCH IN PROGRESS
JRST RET ;ABORT THE COMMAND
;(MATCH ANGLE BRACKETS: >)
SUBTTL COMMAND ROUTINES -- MEMORY AND PAGING CONTROL
;HERE ON AN $W OR $$W.
;
;IF FORM WAS "LOWER<UPPER>WORD$W" THEN IS WORD SEARCH, OTHERWISE
;COMMAND IS TO ENABLE MEMORY-MANAGEMENT FLAGS.
;
;A SINGLE <ESC> ENABLES THE CONDITION, A DOUBLE <ESC> CLEARS IT:
;
; $[$]0W ;ENABLE [DISABLE] AUTO WRITE-ENABLE
; $[$]1W ;ENABLE [DISABLE] AUTO PAGE CREATE
DBLU: TXNE F,QF ;USER TYPE AN ARG?
JRST WORD ;YES, THIS IS A WORD SEARCH
TXNE F,FAF!SAF ;ANY ANGLIES TYPED?
JRST ERR ;YES, THAT'S BAD
IFN FTFILE,<
SKIPN PHYSIO ;ARE WE EXAMINING A REAL DISK FILE?
SKIPN FILING ;MAYBE, ARE WE?
CAIA ;NO
JRST ERR ;YES, CAN'T CHANGE PATCHS WITHOUT
; RE-OPENING THE FILE
> ;END IFN FTFILE
TXNE F,CCF ;$$W?
TDZA T,T ;YES, CLEAR FLAG
SETO T, ;NO, SET FLAG
TXNE F,Q2F ;USER TYPE SECOND ARG?
SKIPA R,WRD2D ;YES, GET INDEX
SETZ R, ;NO, DEFAULT IS 0 (WRITE ENABLE)
JUMPL R,ERR ;MUST BE .GE. 0
CAIL R,PAMAX ;AND .LT. PAMAX
JRST ERR ;NOT IN RANGE, CALL ERROR
MOVEM T,PATCHS(R) ;STORE NEW WRITE-ENABLE WORD
IFN FTFILE,<
SETOM DEPNCT ;RESET PATCHING-TRIED FLAG
SETOM LASTPG ;DON'T KNOW PAGE ACCESS BITS ANYMORE
> ;END IFN FTFILE
JRST RET
;COMMAND TO MAKE LIFE EASIER ON VIRTUAL ADDRESSING MACHINES
;FORMAT IS ARG$NU, WHERE N IS:
;
; BLANK SAME AS 0
; 0 MAP THROUGH EPT AT PAGE ARG (ON -10, CAN BE UPT<EPT$U)
; 1 MAP THROUGH UPT AT PAGE ARG
; 2 MAP THROUGH SECTION MAP AT PAGE ARG
; 3 FAKEAC FLAG: NON-ZERO TO USE FAKE ACS
; 4 SET AC BLOCK TO ARG (EDDT ONLY)
; 5 LOAD ACS FROM 20 WORD BLOCK AT ARG
; 6 SET SPT BASE TO ARG
; 7 SET CST BASE TO ARG
; 8 SET ADDRESS RELOCATION (ADDED TO ALL USER ADDRESSES)
; 9 SET ADDRESS PROTECTION (MAX LEGAL USER ADDRESS)
; 10 SET KI-PAGING MODE (FOR EMULATION, IGNORED IN EDDT)
; 11 SET KL-PAGING MODE (FOR EMULATION, IGNORED IN EDDT)
; 12-19 RESERVED FOR FUTURE
; 20 SET KA-10 CPU TYPE (FOR EMULATION, IGNORED IN EDDT)
; 21 SET KI-10 CPU TYPE (FOR EMULATION, IGNORED IN EDDT)
; 22 SET KL-10 CPU TYPE (FOR EMULATION, IGNORED IN EDDT)
; 23 SET KS-10 CPU TYPE (FOR EMULATION, IGNORED IN EDDT)
; 24+ RESERVED FOR FUTURE
;
;(MATCH ANGLE BRACKETS:>)
;
;FOR MAPPING FUNCTIONS, TWO ALTS MEANS ARG IS AN SPT INDEX INSTEAD OF
;A PAGE NUMBER.
;
;$U WITH NO ARGUMENTS CLEARS 0,1,2,8 AND SETS 3 (I.E., RESTORES "NORMAL
;VIRTUAL ADDRESSING"). $$U WITH NO ARGUMENTS SETS PHYSICAL ADDRESSING
;MODE.
;
;$NU OR $$NU WILL RETURN THE ADDRESS OF THE APPROPRIATE WORD INTERNAL
;TO DDT WHICH CORRESPONDS TO THE FUNCTION. FOR FUNCTIONS 0, 1, AND 2
;THE $$ FORM RETURNS THE MAPPING FUNCTION WORD (I.E., PHYSICAL OR
;VIRTUAL OR SPT-RELATIVE ADDRESSING) WHILE THE $ FORM RETURNS THE
;USER ARGUMENT. FOR ALL OTHER FUNCTION CODES AN ERROR OCCURS.
IFN FTPAGM,< ;ONLY AVAILABLE IN FILDDT ON TOPS20
SETPAG: TXNE F,QF ;ANY ARG?
JRST SETPA2 ;YES, A FUNCTION TO PERFORM
TXNE F,Q2F ;WANT TO READ BACK?
JRST SETPA4 ;YES, GO TYPE IT OUT
TXNE F,FAF!SAF ;$U OR $$U, ANY SUPERFLUOUS ARGS?
JRST ERR ;YES, ILLEGAL
TXNE F,CCF ;$U OR $$U?
JRST SETPHY ;$$U, SET PHYSICAL ADDRESSING
SETZM MAPFN ;UNMAPPED VIRTUAL ADDRESSING
IFN FTFILE,< ;SPECIAL FILDDT DEFAULTING
SETZM FAKEAC ;UNMAPPED 0-17 ALSO, UNLESS
SKIPN PHYSIO ;IF DOING SUPER I/O
SKIPN EXEFMT ;OR IF LOOKING AT A DATA FILE
SKIPA ;DO NOT USE FAKE ACS
> ;END OF IFN FTFILE
SETOM FAKEAC ;ASSUME BACK TO INTERNAL FAKE ACS
IFN FTDEC10&FTFILE,<
SKIPN JOBEDV ;IF NOTHING FROM THE EDV WAS AVAILABLE,
POPJ P, ;GET OUT NOW
MOVE T,EDVEPT ;WE HAD SOMETHING
MOVEM T,MAPPG ;RESTORE THE EPT
MOVE T,EDVSPT ;THE SPT
MOVEM T,SPTWRD ;RESTORED
MOVE T,EDVCST ;AND THE CST
MOVEM T,CSTWRD ;...
AOS MAPFN ;ENABLE THE SIMULATION
> ;END OF IFN FTDEC10&FTFILE
POPJ P, ;THAT'S IT
;HERE ON AN $U WITH AN ARGUMENT. FIGURE OUT WHICH FUNCTION TO PERFORM.
SETPA2: TXNN F,Q2F ;ANY FUNCTION CODE?
TDZA W,W ;NO, ASSUME 0
MOVE W,WRD2D ;YES, GET IT (DECIMAL)
JUMPL W,ERR ;NEGATIVE IS ILLEGAL
CAIL W,PFNMAX ;TOO BIG?
JRST ERR ;ILLEGAL
HLLO TT,F ;FLAGS,,-1
AND TT,PFNDSP(W) ;CHECK FOR ILLEGAL FLAGS
SKPKLP ;KI PAGING?
TXNN F,CCF ;YES, $$ ALWAYS ILLEGAL. WAS IT TYPED?
TLNE TT,-1 ;OR ANY ILLEGAL FLAGS SET?
JRST ERR ;YES, ILLEGAL
ADDI W,1 ;BASE FUNCTIONS AT 1 FOR STORE
JRST (TT) ;DISPATCH
;STILL IFN FTPAGM
;HERE TO RETURN ADDRESS OF DDT WORD FOR USER TO SEE
SETPA4: SKIPL W,WRD2D ;GET FUNCTION CODE
CAIL W,PFNMAX ;TOO BIG?
JRST ERR ;ILLEGAL
TXNN F,CCF ;$ OR $$ TYPED?
SKIPA T,PFNADR(W) ;$NU
MOVS T,PFNADR(W) ;$$NU
TRNN T,-1 ;SOMETHING THERE?
JRST ERR ;NO, USER ERROR
ANDI T,-1 ;CONCOCT AN INTERNAL-TO-DDT ADDRESS
PJRST MASK02 ;AND RETURN VALUE AS IF USER TYPED IT
;STILL IFN FTPAGM
;DISPATCH TABLE FOR $U FUNCTION CODES.
;FORMAT IS: ILLEGAL FLAG BITS,,DISPATCH ADDRESS
;CHANGES HERE SHOULD ALSO GO IN MFNDSP AND COMMENT ON PREVIOUS PAGE.
PFNDSP: SAF+ SETEPT ;(00) SET EPT
FAF!SAF+ SETMAP ;(01) SET UPT
FAF!SAF+ SETSEC ;(02) SET SECTION MAP
FAF!SAF!CCF+ SETFAC ;(03) SET FAKE ACS
FAF!SAF!CCF+ SETACB ;(04) SET AC BLOCK
FAF!SAF!CCF+ SETCAC ;(05) LOAD "CRASH ACS" FROM ADDRESS
FAF!SAF!CCF+ SETSPT ;(06) SET SPT BASE
FAF!SAF!CCF+ SETCST ;(07) SET CST BASE
FAF!SAF!CCF+ SETREL ;(08) SET RELOCATION
FAF!SAF!CCF+ SETPRT ;(09) SET PROTECTION
FAF!SAF!CCF+ SETKIP ;(10) SET KI-PAGING EMULATION
FAF!SAF!CCF+ SETKLP ;(11) SET KL-PAGING EMULATION
FAF!SAF!CCF+ ERR ;(12) RESERVED
FAF!SAF!CCF+ ERR ;(13) RESERVED
FAF!SAF!CCF+ ERR ;(14) RESERVED
FAF!SAF!CCF+ ERR ;(15) RESERVED
FAF!SAF!CCF+ ERR ;(16) RESERVED
FAF!SAF!CCF+ ERR ;(17) RESERVED
FAF!SAF!CCF+ ERR ;(18) RESERVED
FAF!SAF!CCF+ ERR ;(19) RESERVED
FAF!SAF!CCF+ SETKAC ;(20) SET KA-10 CPU TYPE
FAF!SAF!CCF+ SETKIC ;(21) SET KI-10 CPU TYPE
FAF!SAF!CCF+ SETKLC ;(22) SET KL-10 CPU TYPE
FAF!SAF!CCF+ SETKSC ;(23) SET KS-10 CPU TYPE
PFNMAX==.-PFNDSP
PFNADR: MAPFN,, MAPPG ;(00) SET EPT (ADDRESSING MODE)
MAPFN,, MAPPG ;(01) SET UPT (ADDRESSING MODE)
MAPFN,, MAPPG ;(02) SET SECTION MAP (ADDRESSING MODE)
0,, FAKEAC ;(03) SELECT INTERNAL FAKE ACS
0,, ACWRD ;(04) SELECT HARDWARE AC BLOCK
0,, FAKEAD ;(05) ADDRESS OF ORIGIN OF FAKE ACS
0,, SPTWRD ;(06) BASE ADDRESS OF SPT
0,, CSTWRD ;(07) BASE ADDRESS OF CST
0,, UBASE ;(08) RELOCATION ADDRESS
0,, UPROT ;(09) PROTECTION ADDRESS
0,, KIPAG ;(10) KI-PAGING FLAG
0,, KLPAG ;(11) KL-PAGING FLAG
0,, 777777 ;(12) RESERVED
0,, 777777 ;(13) RESERVED
0,, 777777 ;(14) RESERVED
0,, 777777 ;(15) RESERVED
0,, 777777 ;(16) RESERVED
0,, 777777 ;(17) RESERVED
0,, 777777 ;(18) RESERVED
0,, 777777 ;(19) RESERVED
0,, KAFLG ;(20) KA-10 FLAG
0,, KIFLG ;(21) KI-10 FLAG
0,, KLFLG ;(22) KL-10 FLAG
0,, KSFLG ;(23) KS-10 FLAG
;STILL IFN FTPAGM
;SET PHYSICAL ADDRESSING
SETPHY: SETZM FAKEAC ;USE REAL 0-17
SETO W, ;-1 IN MAPFN MEANS PHYSICAL ADDRESSING
JRST SETMA4 ;JOIN COMMON CODE
;SET EPT (AND POSSIBLY UPT FOR PER-PROCESS AREA IF KI PAGING)
SETEPT: SKPKIP ;KI PAGING?
JRST SETMAP ;NO, JUST LIKE UPT
TXNE F,FAF ;USER GIVE UPT?
SKIPA TT,LLIMIT ;YES, USE IT
SETO TT, ;NO, -1 MEANS PER-PROCESS AREA INACCESSIBLE
HRL T,TT ;STORE USER,,EXEC IN MAPPG
JRST SETMA2 ;JOIN COMMON CODE
;SET SECTION MAP
SETSEC: SKPKLP ;ONLY LEGAL IF KL PAGING
JRST ERR ;OTHERWISE FORGET IT
;SET ANY MAP-THE-ADDRESS-SPACE FUNCTION. $U FUNCTION CODE IS STILL IN W.
SETMAP: TXNE F,FAF ;EXTRA ARG?
JRST ERR ;YES, COMPLAIN
SETMA2: TXNE F,CCF ;TWO ALTS?
TXO W,1B1 ;YES, 1B1 MEANS FETCH SPT INDEX
SETOM FAKEAC ;USE FAKE ACS BY DEFAULT
SETMA4: MOVEM W,MAPFN ;STORE FUNCTION FOR MAPADR
MOVEM T,MAPPG ;PAGE OR SPT OFFSET
POPJ P, ;DONE
;STILL IFN FTPAGM
;SET FAKE ACS
SETFAC: SKIPE T ;USER SAY TO USER FAKE ACS?
SETO T, ;YES, FLAG IT AS SUCH
MOVEM T,FAKEAC ;STORE USER ARG
POPJ P, ;DONE
;SET AC BLOCK
IFE FTEXEC,<SETACB==ERR> ;EDDT ONLY
IFN FTEXEC,<
SETACB: SKPEXC ;EXEC MODE?
JRST ERR ;NO, ILLEGAL IN USER MODE
PUSHJ P,CEFFAX ;DEFAULT SECTION IF NEEDED
MOVE W2,T ;ARG WHERE SELAC WANTS IT
PUSHJ P,SELAC ;SELECT AC BLOCK
JRST ERR ;SOMETHING'S WRONG
POPJ P, ;DONE
> ;END IFN FTEXEC
;STILL IFN FTPAGM
;LOAD ACS FROM ADDRESS
SETCAC: PUSHJ P,CEFFAX ;DEFAULT SECTION IF NEEDED
MOVE R,T ;ADDRESS IN R
SETCA1: MOVEM R,FAKEAD ;SAVE FOR USER TO READ LATER
MOVSI S,-20 ;LOOP COUNT/INDEX
SETZM FAKEAC ;DON'T GET FAKE ACS FROM FAKE ACS
SETCA2: PUSHJ P,FETCH ;GET A WORD FROM MEMORY
JRST ERR ;ERROR
MOVEM T,AC0(S) ;SAVE AC AWAY IN INTERNAL AC BLOCK
ADDI R,1 ;ADVANCE TO NEXT AC
AOBJN S,SETCA2 ;GET ALL 20 ACS
SETOM FAKEAC ;FLAG USING FAKE 0 - 17
POPJ P, ;DONE
;SET SPT BASE
SETSPT: PUSHJ P,CEFFAX ;DEFAULT SECTION IF NEEDED
MOVEM T,SPTWRD ;STORE USER ARG
POPJ P, ;DONE
;SET CST BASE
SETCST: PUSHJ P,CEFFAX ;DEFAULT SECTION IF NEEDED
MOVEM T,CSTWRD ;STORE USER ARG
POPJ P, ;DONE
;STILL IFN FTPAGM
;SET PROTECTION AND RELOCATION
SETREL: PUSHJ P,CEFFAX ;DEFAULT SECTION IF NEEDED
MOVEM T,UBASE ;STORE RELOCATION ADDRESS
POPJ P, ;DONE
SETPRT: PUSHJ P,CEFFAX ;DEFAULT SECTION IF NEEDED
MOVEM T,UPROT ;STORE PROTECTION ADDRESS
POPJ P, ;DONE
;SET PAGING MODE (KI/KL), ERROR IF IN EXEC MODE
SETKIP: SKIPE W1,T ;TURNING ON OR OFF?
SETO W1, ;ON
SETZ W2, ;THEREFORE NO KL-PAGING
JRST SETKXP ;COMMON CODE
SETKLP: SKIPE W2,T ;TURNING ON OR OFF?
SETO W2, ;ON
SETZ W1, ;THEREFORE NO KL-PAGING
SETKXP:
IFN FTEXEC,< ;EXEC MODE IS ILLEGAL
SKPUSR ;IN USER OR EXEC MODE?
JRST ERR ;EXEC, THEN DON'T DO IT ERE DEATH RESULT
> ;END IFN FTEXEC
MOVEM W1,KIPAG ;SET APPROPRIATE KI-PAGING FLAG
MOVEM W2,KLPAG ;SET APPROPRIATE KL-PAGING FLAG
POPJ P, ;END OF COMMAND
;SET KA/KI/KL/KS CPU TYPE, ERROR IF IN EXEC MODE
SETKAC: PUSHJ P,SETKZC ;INITIALIZE CPU FLAGS
MOVEM T,KAFLG ;SET KA-10 EMULATION
POPJ P, ;DONE
SETKIC: PUSHJ P,SETKZC ;INITIALIZE CPU FLAGS
MOVEM T,KIFLG ;SET KI-10 EMULATION
POPJ P, ;DONE
SETKLC: PUSHJ P,SETKZC ;INITIALIZE CPU FLAGS
MOVEM T,KLFLG ;SET KL-10 EMULATION
MOVEM T,KLSFLG ;SET KL/KS EMULATION
POPJ P, ;DONE
SETKSC: PUSHJ P,SETKZC ;INITIALIZE CPU FLAGS
MOVEM T,KSFLG ;SET KS-10 EMULATION
MOVEM T,KLSFLG ;SET KL/KS EMULATION
POPJ P, ;DONE
SETKZC: ;HELPER TO CLEAR CPU FLAGS AND SUCH
IFN FTEXEC,< ;NEVER NEVER DO THIS IN EXEC MODE!
SKPUSR ;USER MODE?
JRST ERR ;EXEC, DISALLOW UNDER THREAT OF DEATH
> ;END IFN FTEXEC
SETZM BZ$CPF ;CLEAR START OF CPU FLAGS AREA
MOVE TT,[BZ$CPF,,BZ$CPF+1] ;BLT POINTER TO
BLT TT,ZZ$CPF-1 ;CLEAR REST OF CPU FLAGS AREA
CAIE T,0 ;ARG TO "SET" OR "CLEAR"?
SETO T, ;SET, NORMALIZE TO -1
POPJ P, ;GO SET/CLEAR APPROPRIATE FLAG
> ;END IFN FTPAGM
IFE FTPAGM,<SETPAG==ERR> ;DOESN'T EXIST
;$L AND $$L COMMANDS - LIST PAGE (SECTION) ACCESSABILITY
;
; $[$]L TYPE ACCESS OF ALL PAGES (SECTIONS)
; N$[$]L TYPE ACCESS FOR SECTION N
; N<M$[$]L TYPE ACCESS FOR SECTIONS N THRU M
;
;(MATCH ANGLE BRACKETS: >)
PAGMAP: TXNN F,Q2F ;$NL FORMAT?
TXNE F,SAF ;OR SECOND ANGLE?
JRST ERR ;USER IS CONFUSED
IFN FTFILE,< ;FILDDT MIGHT LUCK OUT
SKIPE FILING ;IF IT'S MEMORY
SKIPN EXEFMT ; OR DATA FILE/DISK
JRST PGMA10 ;THEN LIFE IS SIMPLER
> ;END IFN FTFILE
TXNN F,QF ;UPPER LIMIT TYPED?
MOVEI T,37 ;NO, DEFAULT TO MAX
JUMPL T,ERR ;NEG ARG IS NO GOOD
CAILE T,37 ;CAN GO UP TO 37
JRST ERR ;OUT OF RANGE, SORRY
MOVEM T,ULIMIT ;SAVE UPPER LIMIT AWAY
TXNN F,FAF ;LOWER LIMIT GIVEN?
JRST [TXNN F,QF ;NO, WAS THERE AN EXPLICIT ARG?
SETZ T, ;NO, DEFAULT TO ZERO
MOVEM T,LLIMIT ;SET THE LOWER LIMIT
JRST PAGMA2] ;JOIN COMMON CODE
SKIPL T,LLIMIT ;FETCH SPECIFIED LOWER LIMIT
CAILE T,37 ;IN RANGE?
JRST ERR ;NO WAY
PAGMA2: CAMLE T,ULIMIT ;IS LOWER .LE. UPPER?
JRST ERR ;NO, FORGET THIS
;FALL THROUGH TO NEXT PAGE
;FALL IN FROM ABOVE
;HERE WITH A VALID RANGE OF SECTIONS TO LOOK AT
IFN FTUE10,<
SETZM OLDSPY ;NOT YET KNOWN IF PA.GPN IS VALID
> ;END IFN FTUE10
PUSHJ P,TCRLF ;START OFF RIGHT
SOS LLIMIT ;COMPENSATE FOR LATER AOS
IFN FTEX10,<PUSHJ P,NORSPC> ; MAKE SURE WE'RE IN NORMAL SPACE
PAGMA3: PUSHJ P,LISCK ;USER WANT TO HANG IT UP?
JRST PAGM30 ;NO, KEEP SCANNING
JRST DD1 ;YES, QUIT
MOVEI W1,[ASCIZ\Scanning memory: \] ;"?", NICE TEXT
PUSHJ P,TSTRG ;TELL USER
MOVE T,LLIMIT ;LAST SECTION CHECKED
ADDI T,1 ;CURRENT SECTION TO BE CHECKED
HRLZ T,T ;CURRENT WORD ADDRESS TO BE CHECKED
PUSHJ P,PADR ;TYPE OUT ADDRESS
PUSHJ P,TCRLF ;CAP OFF "?" SUMMARY WITH <CR><LF>
PAGM30: AOS TT,LLIMIT ;GET NEXT SECTION TO CHECK
CAMLE TT,ULIMIT ;PAST LAST SECTION?
JRST DD1 ;YES, QUIT
PUSHJ P,CHKSEC ;GET ACCESS FOR THIS SECTION
TXNN TT,PG$SXI ;DOES IT EXIST?
JRST PAGMA3 ;NO, TRY NEXT SECTION
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
TSTR < Section > ;YES, SAY WHAT WE ARE
PUSH P,ODF ;SAVE OUTPUT RADIX FOR A SECOND
MOVEI ODF,8 ;SET TO OCTAL
MOVE T,LLIMIT ;GET THE SECTION NUMBER
PUSHJ P,TOC ;TYPE IT IN OCTAL
TXNN TT,PG$SMA ;SECTION MAPPED ELSEWHERE?
JRST PAGM34 ;NO, JUST TYPE ACCESS BITS
MOVEI W1,[ASCIZ / shared/] ;ASSUME SHARED
TXNE TT,PG$SIN ;UNLESS PROVEN INDIRECT
MOVEI W1,[ASCIZ / indirect/] ;IT'S INDIRECT
PUSHJ P,TSTRG ;TELL 'EM
IFN FTEXEC,<
SKPUSR ;USER MODE?
JRST PAGM34 ;SKIP THIS STUFF
> ;END IFN FTEXEC
IFE FTMON,<
MOVEI W1,[ASCIZ / to section /] ;SAY WHERE TO
PUSHJ P,TSTRG ;TYPE IT
LDB T,[POINTR TT,PG$SEC] ;GET THE TARGET SECTION
PUSHJ P,TOC ;AND TYPE IT TOO
IFN FTDEC20,< ;-20 CAN MAP TO FILES, OTHER FORKS
TXNN TT,PG$SFJ ;MAPPED TO EITHER FORK OR JFN?
JRST PAGM34 ;NO, ALL DONE
MOVEI W1,[ASCIZ /, fork /] ;ASSUME FORK
TXZN TT,.FHSLF ;FORK OR FILE?
MOVEI W1,[ASCIZ /, JFN /] ;IT'S A FILE
PUSHJ P,TSTRG ;TYPE WHICH
HRRZ T,TT ;LOAD UP FORK/JFN NUMBER
PUSHJ P,TOC ;AND TYPE IT TOO
> ;END IFN FTDEC20
> ;END IFE FTMON
PAGM34: POP P,ODF ;RESTORE RADIX
PUSHJ P,TTAB ;SPACE OVER A LITTLE
PUSHJ P,TYPACC ;TYPE ACCESS INFO TO FINISH THE LINE
TXNE F,CCF ;ARE WE TALKING PAGES HERE?
JRST PAGMA3 ;NO, JUST SECTIONS
;FALL THROUGH TO NEXT PAGE
;FALL IN FROM ABOVE
;HERE TO LOOP THROUGH ALL PAGES OF A SECTION, TYPING ACCESS OF EACH GROUP.
SETOM LOWPAG ;INIT LOW PAGE NUMBER
MOVE R,LLIMIT ;CURRENT SECTION NUMBER
LSH R,PG2WRD ;MAKE IT A PAGE NUMBER
MOVEM R,HGHPAG ;INIT HIGH PAGE NUMBER
JRST PAGMA5 ;SKIP THE CHECK FIRST TIME AROUND
PAGMA4: PUSHJ P,LISCK ;USER WANT TO HANG IT UP?
JRST PAGM40 ;NO, PROCESS NEXT PAGE
JRST DD1 ;YES, ABORT
MOVEI W1,[ASCIZ\Scanning memory: \] ;"?" TEXT, NICE TEXT
PUSHJ P,TSTRG ;TELL USER
MOVE T,HGHPAG ;LAST PAGE CHECKED
ADDI T,1 ;CURRENT PAGE TO BE CHECKED
LSH T,PG2WRD ;MAKE A WORD ADDRESS
PUSHJ P,PADR ;TYPE OUT ADDRESS
PUSHJ P,TCRLF ;CAP OFF "?" SUMMARY WITH <CR><LF>
PAGM40: AOS R,HGHPAG ;GET NEXT PAGE
TRNN R,PAGMSK ;REACHED END OF SECTION?
JRST [MOVE TT,OLDBTS ;YES, GET MOST RECENT ACCESS BITS
TXNN TT,PG$EXI ;DID PAGE 777 EXIST?
JRST PAGMA3 ;NO, GO FOR NEXT SECTION
JRST PAGMA7] ;YES, GO TYPE THE ACCESS
PAGMA5: PUSHJ P,PAGACC ;GET PAGE ACCESS BITS
MOVE T,HGHPAG ;GET CURRENT PAGE AGAIN
SKIPGE LOWPAG ;FIRST TIME THROUGH?
JRST PAGMA6 ;YES, NO OLD ACCESS TO CHECK
IFN FTUE10,<
TXNN TT,PG$SPY ;IF NOT A SPY PAGE,
JRST PAGM58 ;WE DON'T CARE
SKIPE OLDSPY ;DO WE KNOW YET IF PA.GPN IS VALID?
JRST PAGM57 ;YES, DON'T FIND OUT TWICE
SETO TT1, ;GET AN ILLEGAL ADDRESS
TRNE TT,PA.GPN ;IF FIELD IS NON-ZERO,
TDZA TT1,TT1 ;THEN IT'S VALID
IPCFM. TT1, ;NO, CHECK FOR 7.03 OR LATER MONITOR
MOVEM TT1,OLDSPY ;NEGATIVE IF PA.GPN INVALID
JUMPL TT1,PAGM58 ;DO IT OLD WAY IF NOT VALID
AOS OLDSPY ;MAKE SURE IT'S POSITIVE
PAGM57: SKIPG OLDSPY ;IF NOT VALID,
JRST PAGM58 ;DO IT THE OLD WAY
MOVE TT1,OLDBTS ;YES, GET PREVIOUS FLAGS
TXNN TT1,PG$SPY ;IF NOT A SPY PAGE BEFORE,
JRST PAGM59 ;THEN TIME TO TYPE
AOS TT1 ;ADJUST COPY OF OLDBTS FOR COMPARISON
CAME TT1,TT ;IF NO MATCH,
JRST PAGM59 ;THEN TIME TO TYPE
AOS OLDBTS ;YES, MAKE SURE SEQUENTIAL PAGES MATCH
;PJRST PAGM58 ;NOW DO IT THE OLD WAY
> ;END IFN FTUE10
PAGM58: CAMN TT,OLDBTS ;SAME ACCESS AS LAST TIME?
JRST PAGMA4 ;YES, GO FOR NEXT PAGE
MOVE TT1,OLDBTS ;NO, GET OLD BITS
PAGM59: TXNE TT1,PG$EXI ;DID IT EXIST?
JRST PAGMA7 ;YES, GO TYPE THE ACCESS
PAGMA6: MOVEM T,LOWPAG ;NO, SAVE LOW END PAGE NUMBER
MOVEM TT,OLDBTS ;AND ACCESS BITS
IFN FTUE10,<
TXNE TT,PG$SPY ;IF NOT A SPY PAGE,
SKIPE OLDSPY ;OR WE ALREADY KNOW ABOUT PA.GPN
JRST PAGMA4 ;GO FOR THE NEXT PAGE
SETO TT1, ;GET AN INVALID ADDRESS
TRNE TT,PA.GPN ;IF THE FIELD IS PRESENT,
TDZA TT1,TT1 ;THEN WE ALREADY KNOW
IPCFM. TT1, ;NO, CHECK FOR 7.03 OR LATER MONITOR
MOVEM TT1,OLDSPY ;SETUP FLAG FOR LATER
JUMPL TT1,PAGMA4 ;SKIP THIS IF OLD MONITOR
AOS OLDSPY ;MAKE SURE WE KNOW IT WORKS
> ;END IFN FTUE10
JRST PAGMA4 ;GO FOR NEXT PAGE
;HERE TO DO THE EASY FILDDT CASE, OF MEMORY/DATA FILE/DISK.
;ACCESS TO THE ENTIRE TARGET IS THE SAME, SO JUST REPORT IT ONCE.
IFN FTFILE,<
PGMA10: PUSHJ P,TCRLF ;START OFF CLEAN
SKIPE FILING ;LOOKING AT A FILE?
JRST [MOVEI W1,[ASCII /File/] ;YES, MAYBE
SKIPE PHYSIO ;COULD BE A DISK, THOUGH
MOVEI W1,[ASCII /Disk/] ;YEP, A DISK
JRST PGMA11] ;GO TYPE THE MESSAGE
MOVEI W1,[ASCII /Monitor/] ;ASSUME MONITOR
IFN FTDEC10,< ;-10 CAN SEE JOBS TOO
SKIPE JOBING ;LOOKING AT A JOB?
MOVEI W1,[ASCII /Job memory/] ;YES, SAY IT IS
> ;END IFN FTDEC10
PGMA11: PUSHJ P,TSTRG ;TYPE THE TARGET TYPE
TSTR < access is > ;MORE MESSAGE
SETZ R, ;ALL ADDRESSES ARE EQUAL IN THESE CASES
PUSHJ P,PAGACC ;GET THE USER'S ACCESS BITS
PUSHJ P,TYPACC ;TYPE 'EM OUT
JRST DD1 ;ALL DONE
> ;END IFN FTFILE
;HERE TO TYPE OUT THE RANGE OF THE PAGE GROUP AND ITS ACCESS
PAGMA7: MOVE W1,LOWPAG ;GET LOW PAGE NUMBER
PUSHJ P,PAGOUT ;TYPE IT OUT
MOVE W2,LOWPAG ;GET LOW PAGE AGAIN
MOVE W1,HGHPAG ;GET HIGH PAGE
SOS W1 ;DECREMENT TO LAST PAGE OF THIS GROUP
CAMN W1,W2 ;JUST ONE PAGE?
JRST [MOVE W1,[ASCIZ / /] ;YES, SPACE OVER SOME
PUSHJ P,TEXT2 ;SO COLUMNS LINE UP NICELY
JRST PAGMA9] ;GO TYPE ACCESS
MOVEI T,"-" ;NO, TYPE DASH
PUSHJ P,TOUT ;AS SEPARATOR
PUSHJ P,PAGOUT ;AND SECOND PAGE NUMBER
PAGMA9: PUSHJ P,TTAB ;MOVE OVER FROM PAGE NUMBERS
EXCH TT,OLDBTS ;SWAP ACCESS BITS, GET OLD GROUP
PUSHJ P,TYPACC ;TYPE ALL THE BIT MEANINGS
MOVE T,HGHPAG ;GET NEXT PAGE NUMBER
MOVEM T,LOWPAG ;SET NEW LOW PAGE FOR NEXT GROUP
TRNE T,PAGMSK ;AT END OF SECTION?
JRST PAGMA4 ;NO, GO FOR NEXT PAGE GROUP
JRST PAGMA3 ;YES, GO FOR NEXT SECTION
;PAGOUT - TYPE A PAGE NUMBER IN EXACTLY THREE COLUMNS
;PAGE NUMBER IN W1, DESTROYS W1, W2
PAGOUT: SETZ W2, ;CLEAR DESTINATION
REPEAT 3,< ;FOR EACH DIGIT,
LSHC W1,-3 ;SHIFT THE OCTAL DIGIT
LSH W2,-4 ;PLUS FOUR TO MAKE 7-BIT BYTES
> ;END REPEAT 3
ADD W2,[ASCII /000/];TURN IT INTO TEXT
MOVE W1,W2 ;PUT IT IN THE RIGHT PLACE
PJRST TEXT2 ;AND TYPE IT OUT
;PAGACC - DETERMINE ACCESS TO A PAGE
;
; MOVX R,<PAGE NUMBER>
; PUSHJ P,PAGACC
; RETURN
;
;RETURNS ACCESS BITS IN AC TT, ACCORDING TO CHKADR EXCEPT IN THE CASE
;OF FILDDT'ING AN EXE FILE. IN THAT CASE PAGACC LOOKS AT THE EXE FILE'S
;DIRECTORY ACCESS BITS.
;
;CAN DESTROY TT1, SAVES ALL OTHER ACS
PAGACC: PUSHJ P,SAVR ;SAVE THIS OVER CALLS
IFN FTFILE,< ;FILDDT HAS SOME THINGS TO CHECK FIRST
SKIPE FILING ;IF MEMORY,
SKIPN EXEFMT ;OR DATA FILE/DISK,
CAIA ;JUST LIKE EVERYBODY ELSE.
JRST PAGAC5 ;EXE FILES ARE DIFFERENT
> ;END IFN FTFILE
LSH R,PG2WRD ;CHKADR WANTS AN ADDRESS
IFN FTPAGM,<
PUSHJ P,MAPADR ;FIRST DO SPECIFIED MAPPING
TDZA TT,TT ;CAN'T, CLAIM NO ACCESS
> ;END IFN FTPAGM
PUSHJ P,CHKADR ;GET THE ACCESS
IFN FTFILE,<
TXZ TT,PG$EXE!PG$SHR!PG$PRV ;CLEAR NONSENSE BITS
> ;END IFN FTFILE
IFN PG$CPY,<
TXNE TT,PG$WRT ;WRITE ACCESS ALLOWED?
TXNE TT,PG$CPY ;THAT ISN'T COPY-ON-WRITE?
TRNA ;DON'T CLAIM WRITE IF ONLY COPY-ON-WRITE
TXO TT,PG$WT ;YES, SET BIT FOR TYPACC
> ;END IFN PG$CPY
IFN FTUE10,<
IFN FTEXEC,<
SKPUSR ;IF EXEC MODE,
TXCA TT,PG$EXI!PG$SXI ;NEUTER THE TXC BELOW (NO PAGE. UUO HERE)
> ;END IFN FTEXEC
MOVE TT,LASTAF ;GET REAL BITS FROM PAGE. UUO
TXC TT,PG$EXI!PG$SXI ;FIX THE EXISTENCE FLAGS
TXNE TT,PG$SPY ;IF A SPY PAGE,
TXZ TT,PG$LCK!PG$NCA ;DON'T SAY LOCKED OR NOT CACHED
TLZ TT,^-<ACXBTS_-22> ;KEEP ONLY BITS WE CARE ABOUT
> ;END IFN FTUE10
POPJ P, ;ALL DONE
;HERE TO DETERMINE ACCESS FOR EXE FILES IN FILDDT
IFN FTFILE,< ;NOW THE REAL WORK
PAGAC5: SETZ TT, ;START WITH NO ACCESS
IFN FTPAGM,<
SKIPG MAPFN ;IF NO REAL MAPPING,
JRST PAGAC7 ;DON'T WASTE TIME WITH IT
LSH R,PG2WRD ;MAPADR WANTS AN ADDRESS
PUSHJ P,MAPADR ;DO ANY NECESSARY TRANSLATION
JRST [SETZ TT, ;NONE POSSIBLE, CLEAR THE BITS
JRST PAGAC9] ;AND PUNT
LSH R,WRD2PG ;BACK TO A PAGE NUMBER FOR INDEXING INTO PAGTBL
SETZ TT, ;CLEAR THE BITS AGAIN (CLOBBERED BY MAPADR)
PUSHJ P,PAGAC7 ;GET BITS FOR THE PAGE FROM THE FILE DIRECTORY
JUMPE TT,PAGAC9 ;GET OUT NOW IF NO ACCESS
SKPNKA ;IF A KA10
JRST PAGAC9 ;THERE ARE NO BITS
MOVE TT1,MAPBTS ;GET THE ACCUMULATED ACCESS BITS
SKPKLP ;SIGH--I CAN'T FIND MY KI10 MANUAL
JRST PAGAC9 ;SO JUST RETURN THIS ACCESS FOR KI-STYLE PAGING
TXNN TT1,PTWR ;CHECK WHETHER MAP SAYS IT'S WRITABLE
TXZA TT,PG$WT ;NO--CLEAR BIT
TXO TT,PG$WT ;YES--SET BIT
IFN FTDEC10,<
TXNN TT1,PTPUB ;CHECK STATUS OF PM.PUB
TXZ TT,PG$REA ;CONCEALED
TXNN TT1,PTCACH ;SIMILARLY FOR PM.CSH
TXOA TT,PG$NCA ;UNCACHED
TXZ TT,PG$NCA ;CACHED
>
JRST PAGAC9 ;FINALLY RETURN THE BITS
>
PAGAC7: MOVE TT1,R ;NEED INDEX INTO PAGTBL
CAMGE TT1,PGTLEN ;PAST EOF?
SKIPN TT1,@PAGTBL ;OR NON-EXISTENT?
JRST PAGAC9 ;YES, NO ACCESS POSSIBLE
TXO TT,PG$EXI!PG$SXI!PG$EXE!PG$REA ;THE PAGE IS REAL AND READABLE
IFN FTDEC10,<
TXNE TT1,SV$SHR ;SHARABLE?
TXO TT,PG$SHR ;YES, SET THE SHARE BIT
TXNE TT1,SV$HIS ;HISEG PAGE?
TXO TT,PG$HGH ;YES, SET THE BIT
TXNE TT1,SV$WRT ;WRITABLE?
TXO TT,PG$WT ;YES, SET THE BIT
TXNE TT1,SV$CON ;CONCEALED?
TXZ TT,PG$REA ;YES, NOT READABLE
ANDX TT1,SV$FPN ;REDUCE TO FILE PAGE NUMBER
SKIPN TT1 ;IS IT A REAL PAGE?
TXO TT,PG$ABZ ;NO, FLAG ZERO PAGE
> ;END IFN FTDEC10
IFN FTDEC20,<
TXNN TT1,SV$WRT ;WRITABLE AT ALL?
JRST PAGAC8 ;NO, SKIP ALL THIS
TXNE TT1,SV$SHR ;YES, SHARED WRITE?
TXOA TT,PG$WT ;YES, REALLY WRITABLE
TXO TT,PG$CPY ;NO, REALLY MEANS COPY-ON-WRITE
PAGAC8: TXNE TT1,SV$ABZ ;IS IT A ZERO PAGE?
TXO TT,PG$ABZ ;YES, SET THE BIT
> ;END IFN FTDEC20
PAGAC9: POPJ P, ;ALL ACCESSES DETERMINED
> ;END IFN FTFILE
;TYPACC - TYPE TEXT FOR PAGE (SECTION) ACCESS BITS.
;
; MOVX TT,<ACCESS BITS>
; PUSHJ P,TYPACC
; RETURN
;
;TYPES TEXT FOR EACH KNOWN ACCESS BIT, AND TERMINATES WITH A CRLF.
TYPACC: TXNN TT,ACCBTS ;ANY ACCESS BITS SET?
JRST TYPAC9 ;NO, DON'T BOTHER CHECKING INDIVIDUAL BITS
SETZ S, ;FLAG NOTHING TYPED YET
MOVSI W2,-NPGBTS ;LOOP OVER ALL BITS
TYPAC1: TDNN TT,PAGBTS(W2) ;THIS BIT SET?
JRST TYPAC3 ;NO, GO CHECK NEXT ONE
MOVE W1,[ASCIZ /, /] ;GET SEPARATOR TEXT
SKIPE S ;FIRST FLAG FOUND?
PUSHJ P,TEXT2 ;NO, TYPE THE COMMA
MOVE W1,PAGTXT(W2) ;GET TEXT ADDRESS
PUSHJ P,TSTRG ;TYPE IT OUT
SETOM S ;FLAG WE DID ONE
TYPAC3: AOBJN W2,TYPAC1 ;GO BACK FOR NEXT BIT
IFN FTUE10,<
TXNN TT,PG$SPY ;GUARD AGAINST SPY SEGS
TXNN TT,PG$HGH ;IS THIS A HISEG?
JRST TYPAC5 ;NO, CHECK FOR SPY SEG/PAGES
TXNN TT,PA.GSG ;DO WE KNOW WHICH SEGMENT?
JRST TYPAC9 ;NO, GIVE UP
ANDI TT,PA.GSG ;ISOLATE SEGMENT NUMBER
MOVEM TT,SEGOPB+.SGSGN ;SAVE FOR .SGINF
SETZM SEGOPB+.SGSNM ;DON'T KNOW THE NAME YET
SETZM SEGOPB+.SGFLG ;DON'T STEP PAST IT
MOVSI TT,.SGFSP+1 ;LENGTH OF BLOCK DESIRED
HLLM TT,SEGOPB ;SET FOR UUO
XMOVEI TT,SEGOPB ;POINT TO THE BLOCK
SEGOP. TT, ;AND GET THE DATA
JRST TYPAC9 ;OLD MONITOR?
SKIPN SEGFIL+.SGFDV ;IF NO DEVICE,
SKIPE SEGOPB+.SGSNM ;AND NO NAME
TRNA ;AT LEAST ONE, KEEP GOING
JRST TYPAC9 ;NEITHER, GIVE UP
MOVEI T,"," ;YES, GET MORE PUNCTUATION
PUSHJ P,TOUT ;TYPE IT
MOVE TT,SEGOPB+.SGSNM ;GET THE SEGMENT NAME
CAMN TT,SEGFIL+.SGFNM ;IS IT THE SAME AS ITS FILE NAME?
JRST TYPAC4 ;YES, WE'RE DONE HERE
MOVSI W1,(ASCII / (/) ;GET TEXT TO TYPE
PUSHJ P,TEXT ;TYPE IT
MOVE W1,TT ;GET SIXBIT SEGMENT NAME
PUSHJ P,TSIXN ;AND TYPE IT OUT
MOVEI T,")" ;AND CLOSE PAREN
PUSHJ P,TOUT ;TYPE THAT AS WELL
TYPAC4: SKIPN SEGFIL+.SGFDV ;IF NO DEVICE,
JRST TYPAC9 ;WE'RE DONE (NONSHARABLE)
PUSHJ P,TCRLF ;GET TO A NEW LINE
MOVEI T," " ;SPACE OVER
MOVEI W1,7 ;THE WIDTH OF THE PAGE RANGE
PUSHJ P,TOUT ;TYPE THE SPACE
SOJG W1,.-1 ;TYPE SEVERAL
PUSHJ P,TTAB ;FINALLY, MAKE SURE THE INDENTATION MATCHES
MOVEI W1,[ASCIZ /from /]
PUSHJ P,TSTRG ;SAY WHAT THIS IS
MOVEI TT,SEGFIL ;ADDRESS OF FILESPEC
PUSHJ P,TYPRFS ;TYPE THE FILESPEC
JRST TYPAC9 ;DONE WITH SHARABLE HISEG
TYPAC5: TXNN TT,PG$SPY ;ARE THESE PAGES SPYING?
JRST TYPAC9 ;NO, GIVE UP
MOVSI W1,(ASCII /, /) ;YES, GET SEPARATOR
PUSHJ P,TEXT ;TYPE IT
MOVEI W1,[ASCIZ /monitor/] ;ASSUME VIRTUAL
TXNN TT,PA.GVR ;IS THAT RIGHT?
MOVEI W1,[ASCIZ /core/] ;NO, CHANGE THE TEXT
PUSHJ P,TSTRG ;SAY WHICH KIND OF SPY PAGE
MOVEI W1,[ASCIZ / page/] ;ADD THE WORD
PUSHJ P,TSTRG ;TO SAY WHAT THIS IS
MOVE W1,HGHPAG ;GET FIRST NON-EX PAGE
SUB W1,LOWPAG ;GET NUMBER OF PAGES
MOVEI T,"s" ;CHARACTER TO MAKE PLURAL
CAIE W1,1 ;IF NOT JUST ONE PAGE,
PUSHJ P,TOUT ;MAKE IT PLURAL
SKIPG OLDSPY ;IF NO TARGET INFORMATION,
JRST TYPAC9 ;DON'T TYPE JUNK
MOVEI T," " ;SEPARATION
PUSHJ P,TOUT ;NEATNESS COUNTS
SOJLE W1,TYPAC6 ;SKIP THIS IF NOT MULTIPLE PAGES
SUBM TT,W1 ;BACK OFF TO ORIGINAL PAGE NUMBER
ANDI W1,PA.GPN ;ISOLATE TO JUST PAGE NUMBER
PUSHJ P,TOCTW ;TYPE THE STARTING PAGE NUMBER
MOVEI T,"-" ;INDICATE A RANGE
PUSHJ P,TOUT ;TYPE THE SEPARATOR
TYPAC6: MOVE W1,TT ;COPY BITS
ANDI W1,PA.GPN ;ISOLATE PAGE NUMBER
PUSHJ P,TOCTW ;TYPE IT IN OCTAL
;PJRST TYPAC9 ;DONE WITH SPY PAGES
> ;END IFN FTUE10
TYPAC9: PUSHJ P,TCRLF ;NO MORE BITS, FINISH OFF LINE
POPJ P, ;AND RETURN
DEFINE BITS <
X PG$REA,<Read> ;PAGE CAN BE READ
X PG$WT,<Write> ;PAGE CAN BE WRITTEN
X PG$CPY,<Copy-on-write> ;PAGE IS COPY-ON-WRITE
X PG$EXE,<Execute> ;PAGE CAN BE EXECUTED FROM
X PG$ACC,<AA> ;PAGE ACCESS ALLOWED
X PG$PRV,<Private> ;PAGE IS A PRIVATE PAGE
X PG$SHR,<Sharable> ;PAGE CAN BE SHARED
X PG$HGH,<Hiseg> ;PAGE IS PART OF HIGH SEGMENT
X PG$ABZ,<Zero> ;PAGE ALLOCATED BUT ZERO
X PG$SPY,<Spying> ;PAGE IS ACTUALLY SPYING ON SOMEONE
X PG$NPG,<Cannot page> ;PAGE CANNOT BE PAGED OUT
X PG$PGO,<Paged out> ;PAGE IS PAGED OUT
X PG$LCK,<Locked> ;PAGE IS LOCKED IN CORE
X PG$NCA,<Not cached> ;PAGE IS NOT CACHED
>
DEFINE X(B,S) <IFN <B>,<EXP B
ACCBTS==ACCBTS!<B>>>
ACCBTS==0
PAGBTS: BITS ;MAKE THE BIT TABLE
NPGBTS==.-PAGBTS
DEFINE X(B,S) <IFN <B>,<EXP [ASCIZ /S/]>>
PAGTXT: BITS ;MAKE THE TEXT TABLE
IFN FTUE10,<ACXBTS==ACCBTS!PG$EXI!PG$SXI!PG$SEC!PG$VIR> ;BIT MASK FOR PAGACC
SUBTTL COMMAND ROUTINES -- BREAKPOINT FACILITY
IFE FTFILE,<
;ALL $B COMMANDS GET HERE IN FORM: <A>$<N>B
;
;NOTE THAT BREAKPOINT 0 IS TREATED SPECIAL IN THAT IT IS RESERVED FOR
;"UNSOLICITED" BREAKPOINTS - I.E., OCCASIONS WHEREIN CONTROL ARBITRA-
;RILY PASSES TO DDT WITHOUT DDT'S EXPECTING IT - EITHER BY THE USER PRO-
;GRAM EXECUTING A "JSR $0BPT" OR VIA A MONITOR/EXEC INTERRUPT. IN EITHER
;CASE THERE IS NO INSTRUCTION TO BE SAVED/RESTORED/EXECUTED, NO PROCEED
;COUNT, NO CONDITIONAL BREAK INSTRUCTION, ETC. ON PROCEED CONTROL IS
;SIMPLY RETURNED TO THE "INTERRUPTED" PROGRAM.
BPS: SKIPE MAPFN ;ANY MAPPING IN EFFECT
JRST ERR ;NOT STRAIGHT VIRTUAL
TXNE F,QF ;HAS <A> BEEN TYPED?
JRST BPS1 ;YES
TXNE F,FAF!SAF ;HAS ADDR TO TYPEOUT BEEN TYPED?
JRST ERR ;YES, ILLEGAL UNLESS WE SAW <A> TOO
TXNE F,Q2F ;HAS <N> BEEN TYPED?
JRST BPS2 ;YES
MOVE T,[BPT$B+B$SIZ,,BPT$B+B$SIZ+1] ;NO - COMMAND IS $B
SETZM BPT$B+B$SIZ ;ZERO FIRST WORD OF BREAKPOINT STUFF
BLT T,BPT$E-1 ;CLEAR OUT ALL BREAKPOINTS
POPJ P,
;STILL IFE FTFILE
BPS1: PUSHJ P,CEFFAX ;DEFAULT SECTION IF NEEDED
TDNN T,[^-1,,^-17] ;IS THIS AN AC?
HRRZS T ;YES, FIX UP JUST IN CASE OF ZERO
SKIPN R,T ;SAVE COPY OF BREAKPOINT ADDRESS
JRST BPS1A ;<A> = 0 MEANS CLEAR A BPT, NOT SET ONE
PUSHJ P,FETCH ;CAN BREAKPOINT BE INSERTED HERE?
JRST ERR ;NO
PUSHJ P,DMEMER ;CAN'T SET BPT IF CAN'T WRITE
SKIPE BPBLK ;INTER-SECTION BPT POSSIBLE?
JRST BPS1A ;YES, DON'T NEED TO HAVE DDT THERE
PUSH P,R ;HANG ON TO R FOR MOMENT
HRRI R,DDT ;HANDY DANDY LOCATION WE KNOW ABOUT
PUSHJ P,FETCH ;READ THAT SECTION ADDRESS IN OTHER SECTION
JRST [ SMERS <CAN'T SET BREAKPOINT, $4M NOT SET> ;CAN'T
JRST ERR] ;TELL 'EM WHY NOT
CAME T,DDT ;DO WE SEEM TO BE IN OTHER SECTION?
JRST ERR ;NO, SO NO BREAKPOINT THERE
POP P,R ;NOW RESTORE R
BPS1A: TXNN F,Q2F ;HAS <N> BEEN TYPED?
JRST BPS3 ;NO
BPS2: MOVE S,WRD2D ;YES - GET DESIRED BREAKPOINT NUMBER
CAIL S,0 ;WITHIN RANGE?
CAILE S,NBP ; . . .
JRST ERR ;NO - COMPLAIN AT USER
IMULI S,B$SIZ ;YES, MAKE INTO BREAKPOINT "INDEX"
TXNN F,QF ;NOW - WAS <A> SPECIFIED?
JRST [ XMOVEI T,BPT$B(S) ;NO - RELOCATE INTO BREAKPOINT AREA
JRST MASK02] ;TREAT AS DDT INTERNAL ADDRESS
JUMPE R,[SETZM BPT$B+B$ADR(S) ;IF 0$<N>B, JUST CLEAR BPT N
POPJ P,] ;DONE
MOVE T,R ;BREAKPOINT ADDRESS INTO T
MOVEI R,B$SIZ ;START WITH $1B
BPS2E: CAMN T,BPT$B+B$ADR(R);SOME OTHER BREAKPOINT HAVE THIS ADDRESS?
SETZM BPT$B+B$ADR(R) ;YES - BUT NOT ANYMORE!
ADDI R,B$SIZ ;ADVANCE TO NEXT BREAKPOINT SLOT
CAIGE R,B$SIZ*<NBP+1> ;CHECKED THEM ALL YET?
JRST BPS2E ;NOPE - GO GET THE REST
JRST BPS5 ;YES - GO DEFINE THIS (NEW) BREAKPOINT
;STILL IFE FTFILE
BPS3: SKIPN T,R ;PUT THE BREAKPOINT ADR BACK IN T
JRST ERR ;0$B IS ILLEGAL
MOVEI S,B$SIZ ;PROCESS THE COMMAND A$B
;FIRST SEARCH FOR BREAKPOINT ALREADY ASSIGNED TO REQUESTED ADDRESS
BPS4: CAMN T,BPT$B+B$ADR(S);THIS BREAKPOINT HAVE ADDRESS ALREADY?
JRST BPS5 ;YES - PUT BREAKPOINT HERE
ADDI S,B$SIZ ;ADVANCE TO NEXT SLOT
CAIGE S,B$SIZ*<NBP+1> ;TRIED THEM ALL YET?
JRST BPS4 ;NO - KEEP ON LOOKING
;NOW SEARCH FOR A UNUSED BREAKPOINT
MOVEI S,B$SIZ ;START AT $1B
BPS4E: SKIPN BPT$B+B$ADR(S) ;IS THIS BREAKPOINT IN USE?
JRST BPS5 ;NO - USE IT
ADDI S,B$SIZ ;YES, ADVANCE TO NEXT SLOT
CAIGE S,B$SIZ*<NBP+1> ;TRIED THEM ALL YET?
JRST BPS4E ;NO - KEEP ON LOOKING
JRST ERR ;YES, NO MORE BREAKPOINTS LEFT
;NOW HAVE ADDRESS IN T, BREAKPOINT INDEX IN S, SET NEW BREAKPOINT
BPS5: MOVEM T,BPT$B+B$ADR(S);SET NEW BREAKPOINT ADDRESS
MOVSI T,(JFCL) ;A HANDY NOOP (ALBEIT SLOW ON KL-10'S)
MOVEM T,BPT$B+B$XCT(S);PRESET USER CONDITIONAL BREAK INSTRUCTION
MOVEI T,1 ;DEFAULT PROCEED COUNT
MOVEM T,BPT$B+B$CNT(S);SET THAT ALSO
TXZE F,FAF ;USER SPECIFY ADDRESS TO BE OPENED ON BREAK?
SKIPA T,LLIMIT ;YES
SETO T, ;NO
MOVEM T,BPT$B+B$OPN(S);REMEMBER WHICH
TXZE F,SAF ;USER SPECIFY ADDRESS OF COMMAND ON BREAK?
SKIPA T,ULIMIT ;YES
SETZ T, ;NO
MOVEM T,BPT$B+B$STR(S);SET COMMAND STRING (IF ANY)
; (IGNORED IF FTYANK TURNED OFF)
SETZM BPT$B+B$FLG(S) ;CLEAR OUT ALL BREAKPOINT FLAGS
MOVX T,BP$PRO ;AUTO PROCEED FLAG
TXNE F,CCF ;AUTO-PROCEEDING BREAKPOINT ($$B)?
IORM T,BPT$B+B$FLG(S);YES, MARK ACCORDINGLY
MOVE T,[JSR BCOM] ;BREAKPOINT JSR'S TO
MOVEM T,BPT$B+B$JSR(S);THIS INSTRUCTION
POPJ P, ;RETURN WITH NEW BREAKPOINT SET
;STILL IFE FTFILE
;HERE ON $P COMMAND -- PROCEED FROM A BREAKPOINT
PROCD: SKIPN BPTIP ;BREAKPOINT IN PROGRESS?
JRST ERR ;NO, $P ILLEGAL
PUSHJ P,RSTAC ;RESTORE ACS
SKIPE S,BPTDX ;GET BREAKPOINT INDEX
TXNN F,QF ;EXPLICIT PROCEED COUNT?
MOVEI T,1 ;NO (OR PROCEED FROM $0B)
TXNN F,QF ;EXPLICIT PROCEED COUNT?
SKIPN BPT$B+B$CNT(S) ;NO, STORE NEW VALUE IF OLD ONE'S ZERO
MOVEM T,BPT$B+B$CNT(S);YES, SET NEW PROCEED COUNT
MOVX T,BP$PRO ;AUTO PROCEED FLAG
ANDCAM T,BPT$B+B$FLG(S);CLEAR AUTO PROCEED
TXNE F,CCF ;UNLESS AUTO PROCEED ($$P)
IORM T,BPT$B+B$FLG(S);IN WHICH CASE SET AUTO PROCEED
PROCD2: PUSHJ P,TCRLF ;<CR><LF> FOR NEATNESS
SKIPE I.LOG ;STILL AT BREAKPOINT PC?
SETZM BPTDX ;NO, NO NEED TO SIMULATE, JUST JUMP TO USER
; NOTE THAT THIS MEANS THAT IF THE USER
; HAS $X'ED AWAY FROM THE BREAKPOINT AND
; BACK AGAIN THEN AN IMMEDIATE BREAKPOINT
; WILL RESULT.
;HERE FROM A BREAKPOINT WHEN IT IS NOT YET TIME TO BREAK. THE BREAKPOINT
;INSTRUCTION MUST BE SIMULATED AND CONTROL RETURNED TO THE USER PROGRAM.
PROCD4: SKIPN BPTDX ;NEED TO SIMULATE AN INSTRUCTION FIRST?
JRST PROCD8 ;NO, RETURN DIRECTLY TO USER PROGRAM
PUSHJ P,$PX ;SIMULATE ONE INSTRUCTION (HANDLES ERCAL/JMP)
JRST ERR ;FATAL ERROR SOMEWHERE
; (NOTE THAT AT THIS POINT THE USER HAS
; NOT YET BEEN INFORMED DDT EVEN HAS
; CONTROL IF THIS IS A NON-BREAKING
; BREAKPOINT!)
PROCD8: PUSHJ P,INSRTB ;INSERT USER PROGRAM BREAKPOINTS
IFN FTEX10,< ;CPNDDT ONLY ON A -10
SKIPN T,CPNBIT ;DID WE LIGHT A BIT IN CPNDDT?
JRST PROCD9 ;NO, DON'T CLEAR IT
MOVE R,CPNDDT ;YES, GET ADDRESS TO CLEAR
SETZ T, ;AND A ZERO TO PUT THERE
PUSHJ P,STOREP ;LET OTHER CPUS RUN AGAIN
JFCL ;C'EST LA VIE
PROCD9:
> ;END IFN FTEX10
SETZM BPTIP ;CLEAR BREAKPOINT IN PROGRESS (NO 2ND $P)
SETZM I.NPC ;ALSO CLEAR PREVIOUS $X PC
MOVE T,PCWRD ;ADDRESS IN USER PROGRAM AT WHICH TO RESUME
JRST RESTRX ;RETURN TO USER PROGRAM
> ;END IFE FTFILE FROM PAGES AGO
IFN FTFILE,<BPS==<PROCD==ERR>>
SUBTTL COMMAND ROUTINES -- EXECUTE AND SINGLE STEP
IFE FTFILE,<
XEC: SKIPE MAPFN ;STRAIGHT VIRTUAL ADDRESSING?
JRST ERR ;NO - ERROR
TXNN F,QF ;SKIP IF QUANTITY TYPED
TDZA T,T ;MAKE SURE COUNT IS ZERO
TXNN T,777B8 ;SKIP IF VALID INSTRUCTION
JRST $X ;GOTO SINGLE STEP EXECUTE ROUTINE
MOVEM T,I.NST ;SAVE INSTRUCTION
PUSHJ P,TCRLF
IFN FTEXEC,<PUSHJ P,RSTAC> ;ENSURE PROPER CONTEXT AC BLOCK
SETZM SKPCT ;INIT SKIP COUNT
IFN FTMON,<CHKIN> ;LOCK BREAKPOINT BLOCK
TXNN F,CCF ;<INSTR>$$X FORM?
JRST XEC2 ;NO, CHECK OUT $X SECTION
TXNN F,Q2F ;EXPLICIT SECTION TYPED?
JRST XEC4 ;NO, JUST XCT THE **** INSTRUCTION!
MOVS T,WRD2O ;YES, POSITION USER-SPECIFIED SECTION
JRST XEC3 ;AND TRY TO EXECUTE IN THAT SECTION
;IF WE ARE RUNNING EXTENDED, THE USER MAY WANT TO EXECUTE THE
;INSTRUCTION AS IF IT WERE IN ANOTHER SECTION. WE WILL ASSUME
;HE WANTS TO EXECUTE IT IN THE CURRENT DEFAULT SECTION.
XEC2: PUSHJ P,GDFSEC ;GET DEFAULT SECTION
XEC3: CAMN T,SECDDT ;SAME AS OURS?
JRST XEC4 ;YES, JUST EXECUTE IT
SKIPN BPBLK ;GOT A GLOBAL BREAKPOINT/EXECUTE BLOCK?
JRST XEC3L ;NO, SEE IF MAPPED INTO SPECIFIED SECTION
XMOVEI W1,XEC5 ;ADDRESS TO RETURN TO
SETZM I.CJMP ;FLAG WE WANT SKIPS CHECKED
SETO W2, ;FLAG WE'RE INSTR$X
PUSHJ P,$XBLK ;SET UP THE BLOCK
PUSHJ P,INSRTB ;INSTALL BREAKPOINTS
JRST RESTRX ;RESTORE CONTEXT AND JUMP TO IT
XEC3L: MOVE R,T ;POSITION SECTION NUMBER
PUSHJ P,RWEMAP ;ARE WE MAPPED IN DESIRED SECTION?
JRST $XBLKE ;NO, CAN'T DO THE $X
HRRI R,XEC4 ;YES, DDT ADDRESS IN TARGET SECTION
JSP TT,SECCHG ;PUT DDT IN THAT SECTION
SKPNS0 ;IF JUST LEFT NZS,
SETZM SYMVAL ;WE NEED TO CALL SYMCHK AGAIN
XJRST R ;GO DO THE XCT IN TARGET SECTION
;NOTE THAT THIS HAS THE EFFECT OF
;LEAVING DDT IN THE TARGET SECTION!
;STILL IFE FTFILE
XEC4: PUSHJ P,INSRTB ;INSTALL BREAKPOINTS
JSP T,RESTORE
XCT I.NST
XEC5: REPEAT SKPMAX,<AOS SKPCT> ;NOTE COUNT OF LOCS SKIPPED
XEC6: JSR SAVE ;SAVE CONTEXT
PUSHJ P,REMOVB ;REMOVE BRKPTS
IFN FTMON,<CHKOUT> ;UNLOCK BREAKPOINT BLOCK
MOVEI TT,SKPMAX
SUB TT,SKPCT ;COMPUTE AMOUNT OF PC INCREMENT
SETZM SKPCT ;DON'T CONFUSE OTHERS
MOVEI T,"<" ;INDICATE INSTRUCTION RETURNED
PUSHJ P,TOUT ;SINCE LINE-FEED ISN'T VERY VISIBLE
JUMPE TT,XEC8 ;IF INST DIDN'T SKIP, JUST CLOSE BRACKETS
MOVEI W1,[ASCIZ "SKIP"] ;MAKE SURE IT IS CLEAR
PUSHJ P,TSTRG ; THAT THIS WAS A SKIP
CAIG TT,1 ;SINGLE SKIP?
JRST XEC8 ;YES, JUST CLOSE OFF
PUSHJ P,TSPC ;TYPE A SPACE
MOVEI T,"0"(TT) ;GET ASCII CHAR COUNT
PUSHJ P,TOUT ;TYPE IT
XEC8: MOVEI T,">" ;CLOSE OFF SKIP MESSAGE
PUSHJ P,TOUT ;WITH A CLOSE ANGLE BRACKET
PUSHJ P,TCRLF ;TYPE 2 CR-LFEEDS
JRST DD1
;STILL IFE FTFILE
;$XBLK - BUILD AN EXECUTE BLOCK IN A NON-DDT SECTION
;
;IF THE INSTRUCTION IS TO BE IN A DIFFERENT SECTION THAN DDT, WE HAVE TO
;PUT THE INSTRUCTION IN THAT SECTION AND JUMP TO IT. WE THEN HAVE TO JUMP
;BACK, AND SOMEHOW TELL IF THE INSTRUCTION SKIPPED. USING THE SPACE IN THE
;BREAKPOINT BLOCK, WE BUILD A SEQUENCE OF INSTRUCTIONS LIKE THIS:
;
; C(I.NSTE)
; <INSTR> ;T GETS THIS ADDRESS ON RETURN
; XJRST .+SKPMAX+1 ;SKPMAX+1 OF THESE
; ... ;(MIGHT BE SEC. 0 SO CAN'T USE JRST @)
; SECDDT,,<RETURN LOC>+0 ;SKPMAX+1 RETURN ADDRESSES, CORRESPONDING
; SECDDT,,<RETURN LOC>+1 ; TO THE SKPMAX+1 XJRST'S
; ...
; SECDDT,,<RETURN LOC>+SKPMAX
;
;<RETURN LOC> SHOULD BE THE ADDRESS OF THE FIRST "AOS SKPCT" AFTER THE
;USUAL "XCT I.NST". THIS WILL CAUSE CONTROL TO RETURN TO DDT AT THE SAME
;POINT AS IF THE INSTRUCTION HAD BEEN EXECUTED BY THE USUAL XCT. SKIPS ARE
;THEN COUNTED BY SKPCT IN THE USUAL WAY.
;NOTE IT IS THE RESPONSIBILITY OF THE CALLER TO FIX UP <INSTR> TO POINT
;INTO THE BREAKPOINT BLOCK (TO I.NSTE'S CONTENTS) IF NECESSARY.
;
;IF THE INSTRUCTION WAS FOLLOWED BY SOME KIND OF ERJMP, THE ERJMPX/ERCALX
;IS TRANSLATED (BY THE CALLER) INTO THE EQUIVALENT ERJMPX (E.G. ERCALR
;BECOMES ERJMPR) AND THAT INSTRUCTION IS PLACED AFTER THE INSTRUCTION TO
;EXECUTE. THEN THE SEQUENCE LOOKS LIKE THIS:
;
; C(I.NSTE)
; <INSTR> ;T GETS THIS ADDRESS ON RETURN
; ERJMPX .+SKPMAX+1 ;FIRST XJRST REPLACED BY ERJMPX
; XJRST .+SKPMAX+1 ;SKPMAX OF THESE
; ...
; XJRST .+SKPMAX+1 ;THE ERJMPX POINTS HERE
; SECDDT,,<RETURN LOC>+0 ;SKPMAX OF THESE, ONE FOR EACH
; ... ; "SKIP-STYLE" XJRST
; SECDDT,,<RETURN LOC>+SKPMAX-1
; SECDDT,,<ERJMP RETURN> ;THE ERJMPX'S XJRST POINTS HERE
;
;THE ERJMPX SEQUENCE IS ACTUALLY BUILT BY DOING THE NORMAL SEQUENCE FIRST,
;THEN REPLACING THINGS AS NECESSARY.
;
;IF THE INSTRUCTION IS A CONDITIONAL JUMP (E.G. AOJE) THEN THE INSTRUCTION
;IS FIXED UP TO POINT TO ANOTHER XJRST, LIKE THIS:
;
; XJRST .+1 ;INCLUDED ONLY IF INSTR IS A CONDITIONAL JUMP,
; SECDDT,,RH(INSTR) ; INSTR FIXED UP TO POINT TO THIS XJRST
;STILL IFE FTFILE
;$XBLK - BUILD AN EXECUTE BLOCK IN A NON-DDT SECTION
;CALL:
; T/ SECTION TO EXECUTE IN,,0 (ASSUMED DIFFERENT FROM DDT'S)
; W1/ ADDRESS TO RETURN TO NORMALLY
; W2/ -1 IF CALLED FROM INSTR$X
; 0 OR ERJMP RETURN ADDRESS IF CALLED FROM SINGLESTEP $X
; PUSHJ P,$XBLK
;RETURNS: +1 ALWAYS
; T/ ADDRESS OF INSTRUCTION IN BLOCK
$XBLK: SKIPN R,BPBLK ;$4M SET?
$XBLKE: JRST [SMERS <Inter-section reference and no $4M global breakpoint/execute block>
JRST ERR] ;NO, COMPLAIN
HLL R,T ;YES, FIND BP BLOCK IN GIVEN SECTION
JUMPL W2,[ADDI R,BPI$X ;IF INSTR$X, POINT TO RIGHT PLACE
JRST $XBLK0] ;AND SKIP THE "E" STUFF
ADDI R,BPB$X ;POINT TO $X PART OF IT
MOVE T,I.NSTE ;GET E OF INST (USUALLY)
PUSHJ P,DMEMER ;DROP IT IN
HRRI R,1(R) ;INCREMENT LOC
$XBLK0: MOVE T,I.NST ;GET INSTRUCTION
PUSHJ P,DMEMER ;DROP IT INTO BLOCK
MOVEM R,TEM ;HANG ONTO ADDRESS
HRRI R,1(R) ;STEP LOCATION
PUSH P,W1 ;SAVE RETURN ADDRESS
MOVEI W1,SKPMAX+1 ;WANT SKPMAX+1 OF THESE
MOVX T,XJRST ; TO COUNT SKIPS
$XBLK1: HRRI T,SKPMAX+1(R) ; AS "XJRST .+SKPMAX+1"
PUSHJ P,DMEMER ;DROP IT IN
HRRI R,1(R) ;NEXT ADDRESS
SOJN W1,$XBLK1 ;LOOP BACK
MOVEI W1,SKPMAX+1 ;NOW FILL IN SKPMAX+1 ADDRESSES
POP P,T ;GET FIRST RETURN ADDRESS
IFN FTDEC20,<
SKIPLE W2 ;WILL WE BE FILLING IN AN ERJMP LATER?
SOS T ;YES, ACCOUNT FOR EXTRA XJRST
> ;END IFN FTDEC20
$XBLK2: PUSHJ P,DMEMER ;DROP IN ADDRESS
HRRI R,1(R) ;NEXT LOC
HRRI T,1(T) ;NEXT RETURN LOC
SOJN W1,$XBLK2 ;DO ANOTHER ONE
;FALL INTO NEXT PAGE
;STILL IFE FTFILE
;FALL IN FROM ABOVE
;NOW CHECK TO SEE IF WE WANT TO FILL IN ERJMP STUFF
IFN FTDEC20,< ;ERJMP EXISTS ONLY ON -20
JUMPLE W2,$XBLK3 ;IS THERE AN ERJMP?
MOVE R,TEM ;GET INSTRUCTION'S ADDRESS
HRRI R,1(R) ; PLUS ONE
MOVE T,I.NERJ ;GET PROTO ERJMPX
HRRI T,SKPMAX+1(R) ;POINT IT PAST THE XJRSTS
PUSHJ P,DMEMER ;STOMP ON FIRST XJRST
HRR R,T ;POINT TO WHERE ERJMPX POINTS
MOVX T,XJRST ;WANT TO BUILD AN XJRST THERE
HRRI T,SKPMAX+1(R) ; POINTING PAST THE OTHER XJRST ADDRS
PUSHJ P,DMEMER ;STOMP ON AN ADDRESS
HRR R,T ;CHAIN TO OBJECT OF THE XJRST
MOVE T,W2 ;GET ERJMP RETURN ADDRESS
PUSHJ P,DMEMER ;STUFF IT IN
HRRI R,1(R) ;POINT TO NEXT AVAILABLE LOCATION
> ;END IFN FTDEC20
;NOW CHECK IF IT WAS A CONDITIONAL JUMP THAT NEEDS TO BE FIXED UP.
$XBLK3: SKIPN I.CJMP ;CONDITIONAL JUMP?
JRST $XBLK5 ;NO, LEAVE IT ALONE
MOVX T,XJRST ;USUAL RETURN INSTRUCTION
HRRI T,1(R) ; TO .+1
PUSHJ P,DMEMER ;STUFF IT
HRRI R,1(R) ;WHERE TO PUT RETURN ADDR
HLL T,SECDDT ;RETURN INTO OUR SECTION
HRR T,I.NST ;WHEREVER IT WAS SUPPOSED TO BEFORE
PUSHJ P,DMEMER ;SET RETURN ADDR IN BLOCK
HRRI T,-1(R) ;BACK UP TO XJRST
HLL T,I.NST ;FIX UP REST OF INSTRUCTION
MOVE R,TEM ;GET ADDRESS OF INSTRUCTION
PUSHJ P,DMEMER ;STUFF NEW INSTRUCTION
$XBLK5: MOVE T,TEM ;GET ADDRESS OF INSTRUCTION
POPJ P, ;ALL SET UP
;MAKE SURE ENOUGH WORDS ARE ALLOCATED FOR BOTH KINDS OF $X
IFL BPB$XL-<2*<SKPMAX+1>+5>,<
PRINTX ? BPB$XL TOO SMALL, MUST BE AT LEAST 2*<SKPMAX+1>+5>
IFL BPI$XL-<2*<SKPMAX+1>+1>,<
PRINTX ? BPI$XL TOO SMALL, MUST BE AT LEAST 2*<SKPMAX+1>+1>
;STILL IFE FTFILE
;$X IS A FEATURE THAT OPERATES AS FOLLOWS:
; $X OR N$X OR $$X OR N$$X, WHERE N .LT. 2^27, WILL DISPATCH TO
; THIS CODE. THE FOLLOWING ACTIONS WILL BE PERFORMED:
;
; $X EXECUTE A SINGLE INSTRUCTION, THEN ADJUST THE PC. THE
; OPERANDS TO THE INSTRUCTION WILL BE PRINTED OUT AS THEY
; EXIST **AFTER** EXECUTION OF THE INSTRUCTION. <SKIP N>
; OR <JUMP> WILL BE PRINTED IF THE INSTRUCTION SKIPPED OR
; JUMPED. THE ADDRESS OF THE NEXT INSTRUCTION, AS WELL AS
; THE NEXT INSTRUCTION WILL THEN BE PRINTED (IF THE ADDRESS
; IS A REFERENCE TO THE ACS THEN THE ADDRESS PRINTED WILL BE
; JUST THE REGISTER, NOT THE ENTIRE GLOBAL ADDRESS).
; $P WILL ALWAYS DO THE RIGHT THING AFTER ANY NUMBER OF $X'S.
;
; N$X REPEAT THE $X CYCLE N TIMES.
;
; N$$X SAME AS N$X EXCEPT THAT ALL PRINTOUT IS SUPPRESSED FOR
; ALL BUT THE LAST $X CYCLE.
;
; $$X PERFORM A NON-PRINTING $X CYCLE UNTIL THE PC REACHES
; .+SKPMAX; I.E. UNTIL ONE OF THE NEXT SKPMAX+1 INSTRUCTIONS IS
; EXECUTED. THIS IS USEFUL FOR TREATING A SUBROUTINE CALL
; AS A SINGLE INSTRUCTION FOR THE PURPOSES OF $X.
;
; L<U>$$X IS LIKE $$X ONLY "L" IS THE EXPLICIT LOWER ADDRESS AND
; "U" IS THE EXPLICIT UPPER ADDRESS WHICH, IF THE PC ENTERS
; L .LE. PC .LE. U THE $$X TERMINATES.
IFL SKPMAX-3,<PRINTX ?SKPMAX TOO SMALL, MUST BE AT LEAST THREE>
;STILL IFE FTFILE
;FLAGS USED IN $X LOGIC ONLY
FAC== 400000 ;AC TO BE PRINTED
DFAC== 200000 ;INSTRUCTION USES 2 ACS
QFAC== 100000 ;INSTRUCTION USES 4 ACS
FLG== 040000 ;INSTRUCTION MODIFIES FLAGS (JRST,JFCL)
IMM== 020000 ;IMMEDIATE MODE INSTRUCTION
EA== 010000 ;MEMORY REFERENCE INSTRUCTION
DEA== 004000 ;INSTRUCTION REFERENCES 2 MEM LOCATIONSS
QEA== 002000 ;INSTRUCTION REFERENCES 4 MEM LOCATIONSS
FLA== 001000 ;FLOATING AC OPERAND
FLE== 000400 ;FLOATING MEM OPERAND
EA2== 000200 ;EA HAS AN EA (E.G., BYTE POINTER)
BPA== 000100 ;BYTE POINTER AC OPERAND
BPE== 000040 ;BYTE POINTER MEM OPERAND
IMM2== 000020 ;SECOND EA IS IMMEDIATE
FECJ== 000010 ;INSTRUCTION FOLLOWED BY ERCAL THAT JUMPED
FEJJ== 000004 ;INSTRUCTION FOLLOWED BY ERJMP THAT JUMPED
FECJS== 000002 ;ERCAL/ERJMP GOT SKIPPED
XIMM== 000001 ;EXTENDED IMMEDIATE MODE INSTRUCTION
$XW$L== 100 ;ALL OPCODES .LT. $XW$L ARE DANGEROUS
$XW$U== 677 ;ALL OPCODES .GT. $XW$U ARE DANGEROUS
IFE FTEXEC,<
MONUI== JUSTI ;IF USER DDT, TREAT MONITOR UUOS
MONUE== JUSTE ; AS HARDWARE INSTRUCTIONS
MONUAI==SETI
MONUAE==SETEA
> ;END IFE FTEXEC
;STILL IFE FTFILE
;DEFINE SOME MACROS FOR USE WITHIN $X CODE.
DEFINE $XRET,< ;;RETURN TO USER CONTEXT BEFORE XCT
SKIPL I.NXIT ;;IF SAFE INSTRUCTION
JSR SWAP ;;THEN JUST SWAP AC'S
SKIPGE I.NXIT ;;IF DANGEROUS INSTRUCTION
JSP T,RESTOR ;;THEN RESTORE USER'S ENVIRONMENT
> ;END $XRET
DEFINE $XSAVE,< ;;SAVE USER'S CONTEXT AFTER XCT
SKIPGE I.NXIT ;;IF DANGEROUS INSTRUCTION
JSR SAVE ;;THEN SAVE USER'S NEW ENVIRONMENT
SKIPL I.NXIT ;;IF SAFE INSTRUCTION
JSR SWAP ;;SWAP BACK TO USER CONTEXT
> ;END $XSAVE
IFN FTDEC20,<
DEFINE ERXCT (ERINST),< ;;DO AN XCT FOLLOWED BY SUPPLIED ERJMPX.
IFN FTEXEC,<
PUSHJ P,RSTAC> ;;ENSURE RIGHT CONTEXT ACS
$XRET ;;RETURN TO USER CONTEXT
XCT I.NST ;;DO THE INSTRUCTION
ERINST ;;FOLLOWED BY ERJMPX
> ;END ERXCT
> ;END IFN FTDEC20
;STILL IFE FTFILE
;COME HERE FROM $X COMMAND, WITH T SET TO ZERO IF NO QUANTITY WAS
; TYPED.
$X: SKIPN BPTIP ;HAVE WE HIT A BREAKPOINT?
JRST ERR ;NO, $X IS ILLEGAL
MOVEM T,I.REP ;STORE REPETITION COUNT
JUMPG T,$X0 ;JUMP IF POSITIVE COUNT
MOVE T,PCWRD ;ZERO, FETCH CURRENT PC
MOVEM T,LOCSAV ;AND REMEMBER IT
HRRI T,1(T) ;INSTRUCTION PC + 1
TXNE F,FAF ;USER GIVE BASE PC AT WHICH TO STOP?
SKIPA T,LLIMIT ;YES, FETCH IT
MOVEM T,LLIMIT ;NO, SUPPLY OUR DEFAULT
JUMPL T,ERR ;NEGATIVE BOUNDARY IS NOT ACCEPTABLE
HRRI T,SKPMAX(T) ;DEFAULT STOPPING PLACE
TXNN F,SAF ;USER SUPPLY EXPLICIT STOPPING BOUNDRY?
MOVEM T,ULIMIT ;NO, SUPPLY OUR DEFAULT
SKIPL T,ULIMIT ;GET UPPER BOUNDARY
CAMGE T,LLIMIT ;IS UPPER BOUNDARY ABOVE LOWER BOUNDARY?
JRST ERR ;NO, ERROR
SETOM I.REP ;SET REPETITION COUNT NEGATIVE
TXNN F,CCF ;$$X WITH NO ARG?
MOVNS I.REP ;NO, ONLY $X. TREAT AS 1$X
$X0: PUSHJ P,TCRLF ;OUTPUT CRLF TO START
MOVE T,[SCH,,SCHR] ;SAVE CURRENT TYPEOUT MODES
BLT T,ODFR ;TO BE RESTORED AFTER RETURN FROM USER
SETZM I.PXC ;CLEAR IN CASE STICKY
PUSHJ P,$X00 ;DO INSTRUCTION SIMULATION/TRACE STUFF
JRST ERR ;SOMETHING SOMEWHERE KROAKED
POPJ P, ;RETURN FROM $X COMMAND
;HERE FROM ANYPLACE ($P) TO QUIETLY EXECUTE ONE USER INSTRUCTION
;(ADDRESS IN PCWRD) AND RETURN WITHOUT OTHERWISE CHANGING THE WORLD
;AS IN TYPING THE INSTRUCTION OR "<ERSKP>" OR SO FORTH.
$PX: MOVEM F,I.PXF ;SAVE FLAGS OF CALLER
TXO F,CCF ;INDICATE TO BE QUIET
MOVNI T,2 ;AND STAY QUIET
MOVEM T,I.REP ; . . .
SETOM I.PXC ;AND FURTHER, RETURN AFTER ONE ITERATION
PUSHJ P,$X00 ;DO INSTRUCTION SIMULATION/TRACE STUFF
SOS (P) ;SOMETHING SOMEWHERE KROAKED
MOVE F,I.PXF ;RESTORE CALLERS FLAGS
JRST CPOPJ1 ;AND RETURN TO CALLER
;STILL IFE FTFILE
;HERE ON REPEATED $X CYCLES
$X00: PUSHJ P,RSTAC ;RESTORE ACS
SOSN I.REP ;DECREMENT AND TEST COUNTER
TXZ F,CCF ;CLEAR $$ FLAG TO END REPETITIONS
TXZ F,QF!CF!STF ;TURN OFF QUANT, $, ! FLAGS
MOVEM F,FLAGS ;SAVE REGULAR DDT FLAGS
HRRZI T,INDPTH ;SETUP MAX XCT DEPTH
HRRZM T,XCTS
MOVE R,PCWRD ;FETCH ADR OF CURRENT INST
SKIPL I.REP ;INDEFINITE $$X BEING EXECUTED?
MOVEM R,LOCSAV ;NO, REMEMBER OLD PC FOR THIS INST
MOVEM R,I.NPC ;SAVE INSTRUCTION PC
$X02: PUSHJ P,FETCHI ;FETCH CURRENT INSTRUCTION
POPJ P, ;ERROR
$X03: MOVEM T,I.NST ;STORE CURRENT INSTRUCTION
SKPKS ;IF NOT ON A KS-10
JRST $X05 ;JUST DO IT "NORMALLY"
LDB W2,[POINT 9,I.NST,8] ;OPCODE ABOUT TO BE EXECUTED
CAIE W2,704 ;IF UMOVE
CAIN W2,705 ;OR UMOVEM
JRST $X08 ;LEAVE ALONE
CAIE W2,716 ;IF BLTBU
CAIN W2,717 ;OR BLTUB
JRST $X05 ;TREAT NORMALLY
CAIL W2,710 ;SIMILARLY, IF A
CAILE W2,727 ;UNIBUS-FONDLING INSTRUCTION
CAIA ;(ISN'T - TREAT NORMALLY)
JRST $X08 ;LEAVE INSTRUCTION ALONE
$X05: HLLZ S,PCWRD ;SETUP "SECTIONESS" FOR EFFECTIVE ADR CALC
EXCH F,FLAGS ;RETURN TO REAL DDT FLAGS
PUSHJ P,CEFFIX ;CALCULATE REAL EFFECTIVE ADDRESS
POPJ P, ;MEMORY READ ERROR
EXCH F,FLAGS ;BACK TO $X FLAGS
MOVEM T,I.NSTE ;SAVE EFFECTIVE ADDRESS
TDNN T,[-2,,-20] ;IF NOT AN AC
SKIPE EAGLOB ;OR IF GLOBAL REFERENCE
SKIPA T,[Z @I.NSTE] ;SETUP INTERCEPT ADDRESS POINTER
ANDI T,17 ;ELSE KEEP TRACK OF AC REFERENCE
DPB T,[POINT 23,I.NST,35] ;STORE INTERCEPT ADR IN CURRENT INST
MOVEM S,I.NSTS ;KEEP TRACK OF SECTION-NESS OF EA
CAIA ;JUST SKIP IF NORMAL
$X08: SETOM I.KRCK ;FLAG KS-10 SPECIAL (NO TYPEOUT)
;CONTINUED ON NEXT PAGE
;STILL IFE FTFILE
;CONTINUED FROM PREVIOUS PAGE
SETZM I.NXIT ;ASSUME SAFE INSTRUCTION
TXNN F,Q2F ;DID USER TYPE $$<N>X?
JRST $X10 ;NO, CONTINUE NORMALLY
MOVE W1,WRD2O ;YES, LOAD THE VALUE OF <N>
CAIN W1,1 ;IS IT 1?
JRST $X13 ;YES, USER WANTS A QUICK $$X - TRUST HIM
JUMPN W1,ERR ;NO, COMPLAIN AT USER
$X10: LDB W1,[POINT 9,I.NST,8] ;GET OPCODE
CAIL W1,$XW$L ;KNOWN TO BE
CAILE W1,$XW$U ;A DANGEROUS INSTRUCTION?
JRST [SETZM SYMVAL ;YES, MAKE SURE WE NOTE THAT FOR SYCHK
JRST $X12] ;GO FLAG IT
SUBI W1,$XW$L ;NO, MUST CHECK IT, SHIFT IT DOWN
IDIVI W1,^D36 ;W1:=INDEX; W2:=BIT NUMBER
MOVX TT,1B0 ;THE TEST BIT
MOVN W2,W2 ;POSITION COUNTER
LSH TT,(W2) ;POSITION TO BIT "N"
TDNE TT,$XMTBL(W1) ;"MEMORY MUNGE" BIT SET?
SETZM SYMVAL ;YES, RECHECK SYMTABS AFTER EXECUTE
TDNE TT,$XDTBL(W1) ;"DANGEROUS" BIT SET?
$X12: SETOM I.NXIT ;FLAG DANGEROUS INSTRUCTION
$X13: LDB W1,[POINT 4,I.NST,12] ;EXTRACT AC FIELD
MOVEM W1,I.NSTAC ;STORE IT AWAY
SETOM I.NJMP ;FLAG NO JUMP TRANSFER ADDRESS (YET)
SETZM I.PCREF ;FLAG NOT SPECIAL PC-REF CASE (YET)
HLLZ T,I.NPC ;IF THE INSTRUCTION IS FROM SECTION ZERO
ORCM T,I.NXIT ; AND IT'S DANGEROUS
JUMPN T,$X15 ; (SKIP IF NOT)
SKPS0 ; AND IF WE'RE NOT IN ZERO
SETOM I.PCREF ; THEN IT MUST BE EXECUTED IN ZERO
$X15: HLLZ S,I.NSTS ;IF EFFECTIVE ADDRESS
JUMPE S,$X16 ;IS NOT IN SECTION 0,
SKPS0 ;BUT WE ARE,
JRST $X16 ;(NO)
LDB T,[POINT 23,I.NST,35] ;YES, SEE WHAT WE STORED FOR OUR EA
CAILE T,17 ;IF NOT A LOCAL AC REF,
SETOM I.PCREF ;THEN MUST CHANGE SECTIONS TO EXECUTE IT
$X16: SETZM I.CJMP ;NOT A CONDITIONAL JUMP (YET)
MOVSI T,777000 ;MASK FOR OPCODE
AND T,I.NST ;FETCH OPCODE
HLRZ F,T ;SAVE IN RH FOR LATER
SETZ TT, ;START OF TABLE INDEX
CAMLE T,$XTBL(TT) ;IN RANGE OF CURRENT TABLE ENTRY?
AOJA TT,.-1 ;NO, KEEP SEARCHING
HRRZ TT,$XTBL(TT) ;FETCH INSTRUCTION HANDLER
;W1 SETUP FOR INSTRUCTION HANDLERS
IFN FTMON,<CHKIN> ;LOCK BREAKPOINT BLOCK
JRST (TT) ;DISPATCH TO INSTRUCTION HANDLER
;STILL IFE FTFILE
;ADD STACK/ARITH TRAP INSTRUCTIONS; REORGANIZE NEXT FEW PAGES.
;SPLIT DANGEROUS OPCODES INTO TWO TABLES
;$XDTBL - TABLE OF DANGEROUS OPCODES - I.E., INSTRUCTIONS WHICH
;MAY CAUSE SOME ASPECT OF THE PROCESS ENVIRONMENT TO CHANGE.
;INCLUDES ALL INSTRUCTIONS WHICH:
; MAY USE/SET TERMINAL AND OTHER CHARACTERISTICS THAT DDT CHANGES, OR
; CAN CAUSE STACK OR ARITHMETIC TRAPS (AND THEREFORE COULD DISPATCH
; TO LOCATIONS DDT DOESN'T KNOW ABOUT).
;THE $X CODE RESTORES THE COMPLETE USER ENVIRONMENT SHORT OF INSERTING
;BREAKPOINTS BEFORE EXECUTING A DANGEROUS INSTRUCTION.
;$XMTBL - TABLE OF MEMORY MUNGING OPCODES - INSTRUCTIONS WHICH
; CAN MODIFY MEMORY (MAY MUNGE SYMBOL TABLE POINTERS ETC.)
;THE $X CODE FORCES REVALIDATION OF SYMBOL TABLES AFTER EXECUTING
;A MEMORY MUNGING INSTRUCTION.
IF1 < ;INIT FLAG WORDS PASS 1
DEFINE $$XW0 (TBL,NDX),<$X'TBL'.'NDX==0> ;INITIALIZE ALL BITS TO 0
$$XW..==-1 ;INITIALIZE INITIALIZATION COUNTER
REPEAT <<$XW$U-$XW$L>/^D36>+1,< ;ONCE FOR EACH BLOCK OF 36 OPCODES
$$XW..==$$XW..+1 ;NEXT BLOCK OF 36 OPCODES
$$XW0 (D,\$$XW..) ;SET ALL DANGEROUS BITS TO ZERO
$$XW0 (M,\$$XW..) ;SET ALL MEMORY MUNGE BITS TO ZERO
> ;END OF REPEAT
PURGE $$XW0,$$XW.. ;DON'T NEED GARBAGE SYMBOLS ANYMORE
> ;END IF1
IF2 < ;SET THE BITS ON PASS 2
DEFINE $$XW (TBL),< ;;DEFINE THE DEFINING MACRO
DEFINE $$X'TBL (OP),< ;;THE SET-THE-BIT MACRO
IRP <OP>,< ;;FOR EACH OPCODE GIVEN
$$XW.1==<<<<OP>_-^D27>-$XW$L>/^D36> ;;"INDEX" INTO BIT TABLE
$$XW.2==<<<<OP>_-^D27>-$XW$L> - $$XW.1*^D36>;;BIT WITHIN INDEX WORD
$$XW1 (TBL,\$$XW.1,\$$XW.2) ;;SET THE BIT
> ;;END IRP
> ;;END OF $$X'TBL
> ;END OF $$XW
$$XW (D) ;DEFINE $$XD
$$XW (M) ;DEFINE $$XM
DEFINE $$XW1 (TBL,NDX,BIT),<$X'TBL'.'NDX==$X'TBL'.'NDX ! 1B^O'BIT> ;SET THE BIT
;STILL IFE FTFILE AND IF2
;NOW FLAG ALL OPCODES WHICH WE CONSIDER "DANGEROUS"
$$XD < UJEN, GFAD, GFSB>
$$XD < JSYS, ADJSP, GFMP, GFDV>
$$XD < DFAD, DFSB, DFMP, DFDV>
$$XD < DADD, DSUB, DMUL, DDIV>
$$XD < DMOVN, FIX, EXTEND> ;DMOVE
$$XD < DMOVNM, FIXR > ;DMOVEM FLTR
$$XD < UFA, FSC, ADJBP> ; DFN
;ILDB, LDB, IDPB, DPB
$$XD < FAD, FADL, FADM, FADB>
$$XD < FADR, FADRI, FADRM, FADRB>
$$XD < FSB, FSBL, FSBM, FSBB>
$$XD < FSBR, FSBRI, FSBRM, FSBRB>
$$XD < FMP, FMPL, FMPM, FMPB>
$$XD < FMPR, FMPRI, FMPRM, FMPRB>
$$XD < FDV, FDVL, FDVM, FDVB>
$$XD < FDVR, FDVRI, FDVRM, FDVRB>
;MOVE, MOVEI, MOVEM, MOVES
;MOVS, MOVSI, MOVSM, MOVSS
$$XD < MOVN, MOVNM, MOVNS> ; MOVNI
$$XD < MOVM, MOVMM, MOVMS> ; MOVMI
$$XD < IMUL, IMULI, IMULM, IMULB>
$$XD < MUL, MULI, MULM, MULB>
$$XD < IDIV, IDIVI, IDIVM, IDIVB>
$$XD < DIV, DIVI, DIVM, DIVB>
$$XD < ASH > ; ROT, LSH, JFFO
$$XD < ASHC > ; ROTC, LSHC, ?
;EXCH, BLT, AOBJP, AOBJN
;JRST, JFCL, XCT, MAP
$$XD < PUSHJ, PUSH, POP, POPJ>
;JSR, JSP, JSA, JRA
$$XD < ADD, ADDI, ADDM, ADDB>
$$XD < SUB, SUBI, SUBM, SUBB>
;CAIX
;CAMX
;JUMPX
;SKIPX
$$XD < AOJ, AOJL, AOJE, AOJLE>
$$XD < AOJA, AOJGE, AOJN, AOJG>
$$XD < AOS, AOSL, AOSE, AOSLE>
$$XD < AOSA, AOSGE, AOSN, AOSG>
$$XD < SOJ, SOJL, SOJE, SOJLE>
$$XD < SOJA, SOJGE, SOJN, SOJG>
$$XD < SOS, SOSL, SOSE, SOSLE>
$$XD < SOSA, SOSGE, SOSN, SOSG>
;BOOLEAN INSTRUCTIONS
;HALFWORD INSTRUCTIONS
;TXYZ INSTRUCTIONS
;STILL IFE FTFILE AND IF2
;NOW FLAG ALL OPCODES WHICH MODIFY MEMORY BUT ARE NOT "DANGEROUS"
$$XM < DMOVEM >
$$XM < IDPB, DPB> ;ILDB, LDB
$$XM < MOVEM > ;MOVE, MOVEI, MOVES
$$XM < MOVSM, MOVSS> ;MOVS, MOVSI
$$XM < EXCH, BLT > ; AOBJP, AOBJN
$$XM < JRST >
$$XM < SETZM, SETZB> ;SETZ, SETZI
$$XM < ANDM, ANDB> ;AND, ANDI
$$XM < ANDCAM, ANDCAB> ;ANDCA, ANDCAI
;SETM, XMOVEI, SETMM, SETMB
$$XM < ANDCMM, ANDCMB> ;ANDCM, ANDCMI
$$XM < SETAM, SETAB> ;SETA, SETAI
$$XM < XORM, XORB> ;XOR, XORI
$$XM < IORM, IORB> ;IOR, IORI
$$XM < ANDCBM, ANDCBB> ;ANDCB, ANDCBI
$$XM < EQVM, EQVB> ;EQV, EQVI
$$XM < SETCAM, SETCAB> ;SETCA, SETCAI
$$XM < ORCAM, ORCAB> ;ORCA, ORCAI
$$XM < SETCMM, SETCMB> ;SETCM, SETCMI
$$XM < ORCMM, ORCMB> ;ORCM, ORCMI
$$XM < ORCBM, ORCBB> ;ORCB, ORCBI
$$XM < SETOM, SETOB> ;SETO, SETOI
$$XM < HLLM, HLLS> ;HLL, XHLLI
$$XM < HRLM, HRLS> ;HRL, HRLI
$$XM < HLLZM, HLLZS> ;HLLZ, HLLZI
$$XM < HRLZM, HRLZS> ;HRLZ, HRLZI
$$XM < HLLOM, HLLOS> ;HLLO, HLLOI
$$XM < HRLOM, HRLOS> ;HRLO, HRLOI
$$XM < HLLEM, HLLES> ;HLLE, HLLEI
$$XM < HRLEM, HRLES> ;HRLE, HRLEI
$$XM < HRRM, HRRS> ;HRR, HRRI
$$XM < HLRM, HLRS> ;HLR, HLRI
$$XM < HRRZM, HRRZS> ;HRRZ, HRRZI
$$XM < HLRZM, HLRZS> ;HLRZ, HLRZI
$$XM < HRROM, HRROS> ;HRRO, HRROI
$$XM < HLROM, HLROS> ;HLRO, HLROI
$$XM < HRREM, HRRES> ;HRRE, HRREI
$$XM < HLREM, HLRES> ;HLRE, HLREI
;TXYZ INSTRUCTIONS
;STILL IFE FTFILE AND IF2
PURGE $$XW,$$XM,$$XD,$$XW1,$$XW.1,$$XW.2
> ;END IF2
DEFINE $$XTBL (TBL),< ;OPCODE BIT TABLE MACRO
$$XW..==-1 ;INITIALIZE BIT TABLE INDEX
REPEAT <<$XW$U-$XW$L>/^D36>+1,<
$$XW..==$$XW..+1 ;NEXT WORD OF BIT TABLE
$$XWRD (TBL,\$$XW..)
> ;END OF REPEAT
> ;END OF $$XTBL
DEFINE $$XWRD (TBL,NDX),<EXP $X'TBL'.'NDX>
$XDTBL: $$XTBL(D) ;DANGEROUS OPCODE BIT TABLE
$XMTBL: $$XTBL(M) ;MEMORY MUNGING OPCODE BIT TABLE
IF2 <PURGE $$XTBL,$$XWRD,$$XW..> ;ELIMINATE JUNK SYMBOLS
;STILL IFE FTFILE
;OPCODE DISPATCH TABLE.
; LH OF EACH ENTRY CONTAINS LARGEST OPCODE COVERED BY THAT ENTRY,
; RH CONTAINS DISPATCH ADDRESS.
$XTBL: SETZB SET ; 400-403 SETZX
SETM CHECKI ; 404-414 ALL LOGICAL EXCEPT SETX
XMOVEI SETIX ; 415 XMOVEI
ORCBB CHECKI ; 416-473 ALL LOGICAL EXCEPT SETX
SETOB SET ; 474-477 SETOX
HLL SETEA ; 500 HLL
XHLLI SETIX ; 501 XHLLI
HLRES CHEKIS ; 502-577 OTHER HALFWORD
TSON TESTS ; 600-677 TEST CLASS
715000,,IOTS ; 700-715 I/O INSTRUCTIONS
BLTUB KSBBLT ; 716-717 KS BLT BYTE
777000,,IOTS ; 720-777 I/O INSTRUCTIONS
0 ,, CPOPJ ; 000 ALWAYS ILLEGAL
037000,,USRUUO ; 001-037 USER UUOS
040000,,MONUAE ; 040 OLD TOPS-10 CALL
INIT MONINI ; 041 INIT
CALLI MONUAI ; 042-047 UNDEFINED AND CALLI
TTCALL MONUE ; 050-051 OPEN,TTCALL
PMOVEM PREF ; 052-053 PMOVE,PMOVEM
054000,,MONUAI ; 054 UNDEFINED
OUT MONUE ; 055-057 RENAME,IN,OUT
STATO MONUI ; 060-061 SETSTS,STATO
GETSTS MONUE ; 062 GETSTS
OUTBUF MONUI ; 063-065 STATZ,INBUF,OUTBUF
OUTPUT MONUE ; 066-067 INPUT,OUTPUT
USETO MONUI ; 070-075 CLOSE,RELEAS,MTAPE,UGETF,USETI,USETO
ENTER MONUE ; 076-077 LOOKUP,ENTER
101000,,SETI ; 100-101 UNDEFINED
GFSB DMOV ; 102-103 GFAD,GFSB
JSYS IJSYS ; 104 JSYS
ADJSP SETI ; 105 ADJSP
GFDV DMOV ; 106-107 GFMP,GFDV
DFDV DFLOT ; 110-113 DFAD,DFSB,DFMP,DFDV
DSUB DMOV ; 114-115 DADD,DSUB
DDIV SETQFA ; 116-117 DMUL,DDIV
DMOVN DMOV ; 120-121 DMOVE,DMOVN
FIX FXAFLE ; 122 FIX
EXTEND IEXTEND ; 123 EXTEND
DMOVNM DMOV ; 124-125 DMOVEM,DMOVNM
FIXR FXAFLE ; 126 FIXR
FLTR FLAFXE ; 127 FLTR
UFA IUFA ; 130 UFA
DFN IDFN ; 131 DFN
FSC IFSC ; 132 FSC
IBP IIBP ; 133 IBP
ILDB IIXBP ; 134 ILDB
LDB IXBP ; 135 LDB
IDPB IIXBP ; 136 IDPB
DPB IXBP ; 137 DPB
FDVRB FLOAT ; 140-177 FADXX,FSBXX,FMPXX,FDVXX
;STILL IFE FTFILE
;CONTINUATION OF OPCODE DISPATCH TABLE.
MOVMS CHEKIS ; 200-217 MOVXX
IMULB CHECKI ; 220-223 IMULX
DIVB MULDIV ; 224-237 MULX,XDIVX
LSH SETI ; 240-242 ASH,ROT,LSH
JFFO IJFFO ; 243 JFFO
LSHC DBLI ; 244-246 ASHC,ROTC,LSHC
247000,,SETI ; 247 UNDEFINED
EXCH SETEA ; 250 EXCH
BLT IBLT ; 251 BLT
AOBJN IAOBJ ; 252-253 AOBJP,AOBJN
JRST IJRST ; 254 JRST
JFCL IJFCL ; 255 JFCL
XCT IIXCT ; 256 XCT
MAP SETI ; 257 MAP
PUSHJ IPUSHJ ; 260 PUSHJ
PUSH IPUSH ; 261 PUSH
POP IPOP ; 262 POP
POPJ IPOPJ ; 263 POPJ
JSR I.JSR ; 264 JSR
JSP I.JSP ; 265 JSP
JSA I.JSA ; 266 JSA
JRA IAOBJ ; 267 JRA
SUBB CHECKI ; 270-277 ADDX,SUBX
CAIG SETI ; 300-307 CAIXX
CAMG SETEA ; 310-317 CAMXX
SOSG JMPSKP ; 320-377 JUMPXX,SKIPXX,AOJXX,AOSXX,SOJXX,SOSXX
;STILL IFE FTFILE
;ALL OPCODES LESS THAN 100 END UP HERE
;MONITOR UUO HANDLER
IFN FTEXEC,<
MONINI: SKPEXC ;HANDLE USER AND EXEC DIFFERENTLY
JRST USRINI ;USER-MODE INIT
JRST MONUE0 ;EXEC-MODE INIT
MONUAI: TLO F,FAC ;REMEMBER TO PRINT AC
MONUI: SKPEXC ;SKIP IF EXEC MODE
JRST JUSTI ;USER MODE, TREAT UUO AS SINGLE INST
JRST MONUE0 ;EXEC MODE, TRACE THE UUO
MONUAE: TLO F,FAC ;REMEMBER TO PRINT AC
MONUE: SKPEXC ;SKIP IF EXEC MODE
JRST JUSTE ;USER MODE, TREAT UUO AS SINGLE INST
MONUE0: SKPNKA ;CAN SIMULATE ON A KA
JRST USRUUO ;KA-10 EXEC MODE, TRACE THE UUO
POPJ P, ;KI/KL/KS EXEC MODE LOSES FOR THE MOMENT
> ;END IFN FTEXEC
;HANDLE INIT UUO (USER MODE ONLY)
IFE FTEXEC,<
MONINI:> ;USER INIT
USRINI: MOVE T,I.NST ;USER INIT INSTRUCTION
TXZ T,<@(17)> ;CLEAR BLETCH BITS
HRR T,I.NSTE ;GET I/O BITS AND MODE (TOPS-10)
MOVEM T,I.NJR0 ;SET IN SCRATCH BLOCK
MOVE R,PCWRD ;ADDRESS OF INIT UUO
HRRI R,1(R) ;ADDRESS OF DEVICE WORD
PUSHJ P,FETCH ;GET IT
POPJ P, ;MEMORY READ ERROR
MOVEM T,I.NJR1 ;SET SECOND WORD OF SCRATCH BLOCK
HRRI R,1(R) ;ADDRESS OF BUFFER RING HEADER(S)
PUSHJ P,FETCH ;GET IT(THEM)
POPJ P, ;MEMORY READ ERROR
MOVEM T,I.NJR2 ;SET THIRD WORD OF SCRATCH BLOCK
MOVE T,[JRST DOITX3+2] ;INIT "NON-SKIP" RETURN
MOVEM T,I.NJR3 ;SET FOURTH WORD OF SCRATCH BLOCK
HRRI T,1(T) ;INIT "SKIP" RETURN
MOVEM T,I.NJR4 ;FINISH OFF SCRATCH BLOCK
HRRI T,I.NJR0 ;NOW INTERCEPT DOITX'S XCT
MOVEM T,I.NST ;SET TO EXECUTE I.NJR? BLOCK
JRST DOITX ;GO DO IT
;STILL IFE FTFILE
;USER UUO HANDLER
USRUUO: MOVE S,PCWRD ;PC OF USER INSTRUCTION
TLNE S,-1 ;IN SECTION 0?
JRST XUSRUU ;NO, HANDLED DIFFERENTLY
MOVEI R,.JBUUO ;SETUP JOBUUO
EXCH F,FLAGS ;RESTORE REGULAR FLAGS
MOVE T,I.NST ;FETCH INST WITH EFF ADR @ I.NSTE
TXZ T,@ ;CLEAR @ BIT
HRR T,I.NSTE ;MERGE IN COMPUTED EFFECTIVE ADDR
PUSHJ P,DEPMEM ;STORE USER UUO IN .JBUUO IF POSSIBLE
POPJ P, ;MEMORY WRITE ERROR (?)
EXCH F,FLAGS ;RESTORE $X FLAGS
MOVE T,[XCT 41] ;PRETEND INSTRUCTION WAS AN XCT
JRST $X03
;HERE TO HANDLE AN LUUO IN A NON-ZERO SECTION
XUSRUU: PUSHJ P,RDLUUB ;READ ADDRESS OF LUUO BLOCK
SKIPN R,T ;IS THERE ONE?
JRST SETEA ;NO, JUST TRUST TO LUCK
MOVE T,PCFLG ;BUILD LUUO INFO
HRR T,F ;PC FLAGS,,OPCODE
DPB W1,[POINT 4,T,30] ;AND AC
EXCH F,FLAGS ;SWITCH TO NORMAL DDT FLAGS
PUSHJ P,DEPMEM ;FILL IN FIRST WORD IN LUUO BLOCK
POPJ P, ;WRITE ERROR?
AOS R ;POINT TO SECOND WORD
MOVE T,I.NPC ;SECOND WORD GETS LUUO'S PC
HRRI T,1(T) ; PLUS ONE (I.E. LUUO RETURN ADDR)
PUSHJ P,DEPMEM ;FILL THAT IN
POPJ P, ;CAN'T?
AOS R ;POINT TO THIRD WORD
MOVE T,I.NSTE ;3RD WORD GETS E OF LUUO
PUSHJ P,DEPMEM ;STUFF IT
POPJ P, ;??
AOS R ;POINT TO FOURTH WORD
MOVEM R,I.NSTE ;PRETEND THE LUUO WAS REALLY
MOVX T,XJRST ; AN XJRST THROUGH THE FOURTH WORD
MOVEM T,I.NST ;SET PROTO INSTRUCTION
EXCH F,FLAGS ;BACK TO $X FLAGS
JRST IJ$15 ;TREAT LIKE XJRST NOW
IFN FTDEC10,<
RDLUUB: MOVX T,<.UTRED,,TT1> ;UUO ARG <READ,,BLOCK>
MOVEI TT1,2 ;TWO WORDS FOLLOWING
MOVX TT2,.UTLUU ;TRAP TYPE IS LUUO BLOCK
UTRP. T, ;READ THE BLOCK ADDRESS
TDZA T,T ;NONE AFTER ALL?
MOVE T,TT3 ;RETURN IT IN CORRECT AC
POPJ P, ;GOT IT
> ;END IFN FTDEC10
IFN FTDEC20,<
RDLUUB: PUSHJ P,SAVT4 ;PRESERVE JSYS ACS
MOVX T1,.FHSLF ;THIS PROCESS'
MOVX T2,.SWRLT ;LUUO BLOCK
SWTRP% ;READ ADDRESS
MOVE T,T3 ;RETURN IN A USEFUL AC
POPJ P, ;ALL DONE
> ;END IFN FTDEC20
;STILL IFE FTFILE
;INTERPRET FSC
IFSC: TLO F,FAC+FLA+IMM ;FLOATING AC, FIXED IMMEDIATE E
JRST DOIT
;INTERPRET UFA
IUFA: TLOA F,FLA+FLE+DFAC ;REMEMBER FLTG PT, USES 2 ACS
;INTERPRET DFN
IDFN: TLO F,FLA!FLE ;DFN, REMEMBER AC AND E FLOAT
JRST SETEA
;INTERPRET FIX, FIXR, FLTR
FXAFLE: TLOA F,FLE ;REMEMBER THAT E FLOATS (FIX,FIXR)
FLAFXE: TLO F,FLA ;REMEMBER THAT AC FLOATS (FLTR)
JRST SETEA
;INTERPRET FLOATING POINT INSTRUCTIONS
FLOAT: ANDI F,7000 ;FLOATING PT, GET MODE
CAIN F,1000 ;LONG MODE?
TLOA F,DFAC ;YES, PRINT 2 ACS
CAIE F,5000 ;IMMEDIATE MODE?
TLOA F,FLA+FLE+FAC+EA ;NO, PRINT AC AND E BOTH FLOATING
TLO F,FLA+FLE+FAC+IMM ;YES, PRINT AC AND E IMMEDIATE FLTG
JRST DOIT
;STILL IFE FTFILE
;INTERPRET JRST
IJRST: JRST @IJ$DSP(W1) ;DISPATCH TO JRST NN, HANDLER
IJ$DSP: IFIW IJ$00 ;JRST 0,
IFIW IJ$01 ;JRST 01, (PORTAL)
IFIW IJ$02 ;JRST 02, (JRSTF)
IFIW IJ$03 ;JRST 03,
IFIW IJ$04 ;JRST 04, (HALT)
IFIW IJ$05 ;JRST 05, (XJRSTF)
IFIW IJ$06 ;JRST 06, (XJEN)
IFIW IJ$07 ;JRST 07, (XPCW)
IFIW IJ$10 ;JRST 10,
IFIW IJ$11 ;JRST 11,
IFIW IJ$12 ;JRST 12, (JEN)
IFIW IJ$13 ;JRST 13,
IFIW JUSTE ;JRST 14, (XSFM) (TREAT LIKE SETOM)
IFIW IJ$15 ;JRST 15, (XJRST)
IFIW IJ$16 ;JRST 16,
IFIW IJ$17 ;JRST 17,
;JRST 00, - NORMAL UNCONDITIONAL JRST
IJ$00: TLO F,IMM!XIMM ;PRINT "E"
MOVE R,I.NSTE ;NEW USER PC
MOVEI T,NOSKIP ;DDT TRANSFER ADDRESS
JRST IJ$RS ;COMMON CODE
;JRST 01, - PORTAL
IFE FTEXEC,<SYN IJ$00,IJ$01>;USER PORTAL IS NORMAL JRST
IFN FTEXEC,<
IJ$01: TLO F,IMM!XIMM ;PRINT "E"
SKPUSR ;SPECIAL ONLY IF EXEC MODE
SKPKA ;ON A KA-10
JRST IJ$00 ;TREAT AS NORMAL JRST
JRST IJ$US1 ;RETURN TO USER MODE - CAN'T TRACE
> ;END OF IFN FTEXEC
;STILL IFE FTFILE
;JRST 02, - JRSTF
IJ$02: TLO F,IMM!XIMM!FLG ;PRINT "E" AND PC FLAGS
HLLZ T,LASEAF ;GET NEW PC FLAGS
IFN FTEXEC,<
JSP TT,IJ$US> ;ENTERING USER MODE?
MOVE R,I.NSTE ;NEW USER PC
SKPS0 ;IN NON-ZERO SECTION?
JRST IJ$02X ;YES, TRANSLATE TO XJRSTF
HRRI T,NOSKIP ;DDT TRANSFER ADDRESS
MOVEM T,I.NJR0 ;SET IN INTERNAL INTERCEPT BLOCK
MOVE T,[Z @I.NJR0] ;INDIRECT ADDR FOR JRSTF @
JRST IJ$RS ;COMMON CODE
IJ$02X: MOVEM T,I.NJR2 ;STORE FLAGS IN BLOCK
MOVEI W1,5 ;GET XJRSTF AC VALUE
DPB W1,[POINT 4,I.NST,12] ;DIDDLE INSTRUCTION
JRST IJ$05A ;JOIN XJRSTF CODE
;JRST 03,
;JRST 04, - HALT
SYN IJ$00,IJ$03 ;JRST 03, IS UNKNOWN
SYN IJ$00,IJ$04 ;JRST 04, IS LIKE JRST 00,
;JRST 05, - XJRSTF
IJ$05: TLO F,FLG!EA!DEA ;PRINT FLGS AND FLAG-PC DOUBLE WORD
MOVE R,I.NSTE ;EFFECTIVE ADDRESS OF FLAG-PC DOUBLE WORD
JSP W1,IJ$05F ;SETUP I.NJRXX
IJ$05A: XMOVEI T,NOSKIP ;DDT INTERCEPT ADDRESS
MOVEM T,I.NJR3 ;SET IN INTERCEPT BLOCK
MOVEI T,I.NJR2 ;ADDR OF INTERCEPT BLOCK
JRST IJ$RS ;COMMON CODE
IJ$05F: PUSHJ P,FETCH ;GET FLAGS OF FLAG-PC DOUBLE WORD
POPJ P, ;FAILURE
IFN FTEXEC,<
JSP TT,IJ$US> ;GOING FROM EXEC TO USER MODES?
MOVEM T,I.NJR2 ;SET FLAGS IN FLAG WORD
HRRI R,1(R) ;EFFECTIVE ADDRESS + 1
PUSHJ P,FETCH ;GET DESIRED NEW USER PC
POPJ P, ;FAILURE
MOVE R,T ;RETURN IN R
JRST (W1) ;RETURN TO CALLER
;JRST 06, - XJEN
IJ$06: SETOM I.NXIT ;XJEN IS DANGEROUS
JRST IJ$05 ;OTHERWISE JUST LIKE XJRSTF
;STILL IFE FTFILE
;JRST 07, - XPCW
IJ$07: TLO F,FLG!EA!DEA!QEA ;PRINT FLAGS AND 4 MEM LOCS
MOVE R,I.NSTE ;ADDRESS OF MEM BLOCK
HRRI R,2(R) ;ADDRESS OF NEW FLAG-PC DOUBLE WORD
JSP W1,IJ$05F ;SETUP I.NJRXX
XMOVEI T,IJ$07I ;DDT INTERCEPT ADDRESS
MOVEM T,I.NJR3 ;SET IN INTERCEPT BLOCK
MOVEI T,I.NJR0 ;ADDRESS OF INTERCEPT BLOCK
JRST IJ$RS ;COMMON CODE
IJ$07I: $XSAVE ;BACK TO DDT CONTEXT
MOVE R,I.NSTE ;ADDRESS OF FOUR-WORD BLOCK
MOVE T,I.NJR0 ;SAVED FLAGS
PUSHJ P,DEPMEM ;WRITE INTO USERS BLOCK
POPJ P, ;MEMORY WRITE ERROR
HRRI R,1(R) ;NEXT WORD IN FOUR-WORD BLOCK
MOVE T,I.NPC ;ADDRESS OF USER INSTRUCTION
HRRI T,1(T) ;PLUS ONE
PUSHJ P,DEPMEM ;FINISH USERS SAVED FLAG-PC DOUBLE WORD
POPJ P, ;MEMORY WRITE ERROR
JRST TELLX ;FINISH UP THE $X
;JRST 10,
IJ$10: SETOM I.NXIT ;JRST 10, IS DANGEROUS
JRST IJ$00 ;OTHERWISE TREAT LIKE STRAIGHT JRST
;JRST 11,
SYN IJ$00,IJ$11 ;JRST 11, - TREAT LIKE JRST 00,
;JRST 12, - JEN
IJ$12: SETOM I.NXIT ;JEN IS DANGEROUS
JRST IJ$02 ;OTHERWISE TREAT LIKE JRSTF
;JRST 13,
;JRST 14, - XSFM
SYN IJ$00,IJ$13 ;JRST 13, - TREAT LIKE JRST 00,
; SYN JUSTE,IJ$14 ;JRST 14, - XSFM - TREAT LIKE SETOM
;STILL IFE FTFILE
;JRST 15, - XJRST
IJ$15: TLO F,EA ;PRINT EA AND CONTENTS
MOVE R,I.NSTE ;EFFECTIVE ADDRESS OF NEW PC
PUSHJ P,FETCH ;GET NEW PC
POPJ P, ;CAN'T
MOVE R,T ;PUT WHERE IJ$RS WANTS IT
XMOVEI T,NOSKIP ;DDT INTERCEPT ADDRESS
MOVEM T,I.NJR0 ;SET UP INTERNAL INTERCEPT LOCATION
MOVEI T,I.NJR0 ;NEW "E" FOR INSTRUCTION
JRST IJ$RS ;COMMON CODE
;JRST 16, ;JRST 17,
SYN IJ$00,IJ$16 ;JRST 16, - TREAT LIKE JRST 00,
SYN IJ$00,IJ$17 ;JRST 17, - TREAT LIKE JRST 00,
IJ$RS: MOVEM R,I.NJMP ;SAVE NEW (JUMP) INSTRUCTION PC
DPB T,[POINT 23,I.NST,35] ;SET DDT INTERCEPT ADDRESS
SETZM I.PCREF ;DON'T NEED TO CHANGE SECTIONS FOR THIS
JRST DOIT ;AND GO DOIT
IFN FTEXEC,<
IJ$US: SKPUSR ;EXEC MODE?
TXNN T,PC$USR ;GOING INTO USER MODE?
JRST (TT) ;NO
IJ$US1: EXCH F,FLAGS ;RESTORE NORMAL DDT FLAGS
TXNE F,CCF ;IF NOT $$X
SKIPE I.PXC ;OR NOT $P
JRST PROCD2 ;CAN'T TRACE BUT DON'T CARE, JUST DO IT
SMERS <Can't $$X through user mode> ;LEAVE SOMETHING FOR $?
JRST ERR ;PUNT
> ;END OF IFN FTEXEC
;STILL IFE FTFILE
;INTERPRET XCT
IIXCT: JUMPN W1,JUSTE ;IF A PXCT JUST DO IT BLINDLY
MOVE F,FLAGS ;GET BACK NORMAL DDT FLAGS
SOSG XCTS ;CHECK XCT COUNTER
POPJ P, ;CHECK XCT DEPTH COUNTER
TXNE F,CCF ;$$X?
JRST IIXCT1 ;YES, DON'T PRINT ANYTHING
MOVE T,I.NSTE ;GET EFF ADR OF XCT
PUSHJ P,PINST ;PRINT INST BEING XCT'ED
PUSHJ P,TCRLF ;OUTPUT CRLF AFTER INST
IIXCT1: MOVE R,I.NSTE ;GET EFF ADR OF XCT AGAIN
JRST $X02 ;PROCESS EXECUTED INST
;INTERPRET PUSHJ
IPUSHJ: PUSHJ P,IIXPCF ;FETCH PC+1 AND (MAYBE) FLAGS
MOVEM T,I.NSTP ;STORE AWAY TO BE STACKED
MOVX T,PC$BIS ;CLEAR BIS FLAG IN NEW PC WORD
ANDCAM T,PCFLG
MOVE T,I.NSTE ;NEW USER PC
MOVEM T,I.NJMP ;SET NEW USER PC
JRST IPUSHC ;REST COMMON WITH PUSH
;INTERPRET PUSH
IPUSH: TLO F,FAC!EA ;WANT AC AND MEMORY TYPED
MOVE R,I.NSTE ;ADR OF MEMORY OPERAND
EXCH F,FLAGS ;GET DDT FLAGS
PUSHJ P,FETCH ;GET MEMORY WORD
POPJ P, ;CAN'T
MOVEM T,I.NSTP ;SAVE IT FOR PUSH
EXCH F,FLAGS ;GET $X FLAGS
IPUSHC: MOVE T,[ADJSP 0,1] ;SET UP STACK DIDDLE
JRST IPOPJ2 ;JOIN COMMON CODE
;STILL IFE FTFILE
;INTERPRET POP
IPOP: TLO F,FAC!EA ;WANT AC AND MEMORY TYPED
EXCH F,FLAGS ;GET DDT FLAGS
PUSHJ P,ADRSTK ;GET STACK ADR IN R
PUSHJ P,FETCH ;GET POPPED WORD
POPJ P, ;CAN'T
MOVE R,I.NSTE ;GET DESTINATION OF POP
PUSHJ P,DEPMEM ;STUFF IT
POPJ P, ;CAN'T
JRST IPOPC ;COMMON WITH POPJ
;INTERPRET POPJ
IPOPJ: EXCH F,FLAGS ;POPJ, RESTORE NORMAL DDT FLAGS
PUSHJ P,ADRSTK ;GET STACK ADR IN R
PUSHJ P,FETCH ;FETCH PCWORD IT POINTS TO
POPJ P, ;ERROR
TLNN S,-1 ;INSTRUCTION FROM NON-ZERO SECTION?
TLZA T,-1 ;NO, THEN PC ALWAYS BACK TO SECTION 0
TLZ T,770000 ;YES, THEN GLOBAL 30 BIT PC
MOVEM T,I.NJMP ;STORE AS CURRENT PC
IPOPC: MOVE T,[ADJSP 0,-1] ;SET UP STACK DIDDLE
EXCH F,FLAGS ;GET $X FLAGS BACK
IPOPJ2: MOVEM T,I.NST ;DO THIS INSTRUCTION
DPB W1,[POINT 4,I.NST,12] ;ON THIS AC
JUSTAC: TLO F,FAC ;REMEMBER TO PRINT AC
JRST DOIT ;GO OFF AND EXECUTE THE INSTRUCTION
;COMMON CODE FOR PUSHJ, POPJ
ADRSTK: MOVE S,I.NPC ;PC OF INSTRUCTION
SKIPL R,AC0(W1) ;SKIP IF LOCAL STACK POINTER
TLNN S,-1 ;OR GLOBAL POINTER IN NON-ZERO SECTION
HLL R,S ;RELOCATE POINTER TO CURRENT SECTION
POPJ P,
;STILL IFE FTFILE
;INTERPRET JSA
I.JSA: MOVE T,I.NPC ;FETCH INSTRUCTION PC
HRRI T,1(T) ;PLUS ONE
MOVEM T,I.NJMP ;BECOMES NEW USER PC
HRL T,I.NSTE ;PUT EFF ADR IN LH LIKE JSA DOES
EXCH T,AC0(W1) ;STORE IN USER AC, GET OLD CONTENTS
JRST I.JSR2 ;STORE OLD CONTENTS LIKE JSR, THEN JUMP
;INTERPRET JSR
I.JSR: PUSHJ P,IIXPCF ;NEW PC AND (MAYBE) FLAGS
TLO F,FAC ;REMEMBER NOT TO PRINT AC FIELD
MOVX W1,PC$BIS ;CLEAR BIS FLAG IN NEW PC WORD
ANDCAM W1,PCFLG
I.JSR2: TLO F,EA ;PRINT E NORMALLY
EXCH F,FLAGS ;RESTORE NORMAL DDT FLAGS
MOVE R,I.NSTE ;FETCH EFF ADR OF JSR OR JSA
PUSHJ P,DEPMEM ;STORE PC WORD
POPJ P, ;MEMORY WRITE ERROR
EXCH F,FLAGS ;RESTORE $X FLAGS
MOVE T,I.NSTE ;GET EFF ADR AGAIN
HRRI T,1(T) ;INC PAST STORED PC WORD
JRST I.JSR4 ;SET NEW USER PC
;INTERPRET JSP
I.JSP: PUSHJ P,IIXPCF ;GET NEW PC AND (MAYBE) FLAGS
MOVEM T,AC0(W1) ;STORE IN USER AC
MOVX T,PC$BIS ;CLEAR BIS FLAG IN NEW PC WORD
ANDCAM T,PCFLG
MOVE T,I.NSTE ;GET BACK EFF ADR
I.JSR4: MOVEM T,I.NJMP ;STORE NEW PC
TLC F,FAC ;REMEMBER TO PRINT AC
JRST TELL ;GO PERFORM PRINTOUT
;CALCUATE FLAG-PC WORD A LA JSP/PUSHJ
IIXPCF: MOVE T,I.NPC ;INSTRUCTION PC
HRRI T,1(T) ;PLUS ONE
TLNN T,-1 ;IN SECTION ZERO?
HLL T,PCFLG ;YES, L.H. GETS PC FLAGS
POPJ P, ;RETURN WITH FLAG-PC WORD
;STILL IFE FTFILE
;INTERPRET DOUBLE (OR MORE) WORD INSTRUCTIONS
SETQFA: TLOA F,QFAC ;FLAG QUADRUPLE ACS
DFLOT: TLO F,FLA+FLE ;REMEMBER THAT AC AND E ARE FLOATING
DMOV: TLO F,DFAC+DEA ;REMEMBER AC AND E BOTH DOUBLE
JRST SETEA
;HERE TO INTERPRET BYTE MANIPULATION INSTRUCTIONS
;TREAT ILDB/IDPB AS IBP THEN LDB/DPB
IIXBP: MOVX T,1B8 ;CONVERT TO LDB/DPB
IORM T,I.NST ; . . .
MOVE T,PCFLG ;GET USER PC FLAGS
TXZE T,PC$BIS ;CLEAR BIS, WAS IT SET?
JRST [ MOVEM T,PCFLG ;YES, CLEAR IT
JRST IXBP] ;SKIP INCREMENTING THE PTR
MOVE T,[IBP @I.NSTE] ;GET NEW INSTRUCTION
MOVEM T,I.NJR0 ;XCT IT FROM HERE
JSR SWAP ;GET USER CONTEXT
XCT I.NJR0 ;INCREMENT THE USER'S BYTE PTR
JSR SWAP ;BACK TO DDT CONTEXT
IXBP: EXCH F,FLAGS ;BACK TO DDT FLAGS
MOVE R,I.NSTE ;GET ADDRESS OF BYTE POINTER
PUSHJ P,FETCH ;FETCH BYTE POINTER
POPJ P, ;FAILURE
LDB S,[POINT 6,T,5] ;GET P FIELD
CAIG S,44 ;ONE-WORD GLOBAL?
JRST IXBP0 ;NO, NORMAL
ANDX T,VMADR ;YES, GET 30-BIT ADDR
JRST IXBP5 ;AND GO ON
;STILL IFE FTFILE
IXBP0: HLLZ S,I.NSTS ;GET SECTION OF B.P. REFERENCE
CAME S,SECDDT ; IF OUTSIDE DDT'S SECTION
TDNE R,[-2,,-20] ; AND BYTE POINTER IS IN AN AC
CAIA ;NO, IT'S SAFE
SETOM I.PCREF ;YES, MUST CHANGE SECTIONS TO GET IT RIGHT
JUMPE S,IXBP2 ;JUMP IF IN SECTION 0
TLNN T,(1B12) ;NON-ZERO SECTION - IS THIS EXTENDED?
JRST IXBP2 ;NO, LUCKY - DO IT AS IF IN SECTION 0
HRRI R,1(R) ;POINT TO SECTION ADDR.
PUSHJ P,FETCH ;GET IT
POPJ P, ;FAILED
MOVE S,I.NSTS ;RESTORE S
PUSHJ P,CEFFEX ;GET EA OF ITS TARGET BYTE
POPJ P, ;FAILED
JRST IXBP5 ;CONTINUE
IXBP2: PUSHJ P,CEFFIX ;CALCULATE BYTE POINTER EFFECTIVE ADDRESS
POPJ P, ;MEMORY READ ERROR
IXBP5: MOVEM T,I.NEA2 ;REMEMBER IT FOR LATER TYPEOUT
SKIPN I.PCREF ;IF MUST CHANGE SECTIONS
JRST IXBP6 ;(NO, SKIP THIS)
MOVE R,I.NPC ;YES, GET INSTRUCTION
PUSHJ P,FETCHI ;UNCHANGED BY OUR FIXUPS
POPJ P, ;CAN'T?!?
TXO T,1B8 ;DON'T INCREMENT TWICE
MOVEM T,I.NST ;RESTORE FOR PROPER EA HANDLING
IXBP6: EXCH F,FLAGS ;BACK TO $X FLAGS
TLO F,FAC!EA!EA2!BPE ;SET FLAGS
JRST DOIT ;AND GO DO GRUNGE
IIBP: TLO F,BPE!EA ;IBP (MAYBE)
JUMPE W1,DOIT ;IF SO, GO DO IT
TLO F,BPA!FAC ;ADJBP INSTRUCTION
JRST DOIT ;NOW GO DO IT
;STILL IFE FTFILE
;INTERPRET JFFO
IJFFO: TLO F,DFAC ;REMEMBER JFFO USES 2 ACS
;INTERPRET JUMP AND SKIP INSTRUCTIONS
JMPSKP: TRNE F,10000 ;JUMP/SKIP, WHICH IS IT?
JRST SKP ;SKIP CLASS
;INTERPRET AOBJN AND AOBJP
IAOBJ: TLOA F,FAC+IMM!XIMM ;HANDLE AS IMMEDIATE MODE INST WITH AC
;INTERPRET JFCL
IJFCL: TLO F,FLG ;REMEMBER TO PRINT FLAGS
MOVEI T,JMP ;JUMP CLASS OR AOBJ, COME BACK TO $X
DPB T,[POINT 23,I.NST,35] ;STORE INTERCEPT ADDRESS
SETOM I.CJMP ;FLAG CONDITIONAL JUMP
SETZM I.PCREF ;WE CAN SIMULATE IT
JRST DOIT ;GO EXECUTE CONDITIONAL INST
;HERE AFTER EXECUTING CONDITIONAL JUMP INSTRUCTION THAT ACTUALLY
; DOES JUMP
JMP: EXCH T,I.NSTE ;SAVE T, GET EFF ADR OF JUMP
MOVEM T,PCWRD ;STORE EFF ADR AS NEW PC
EXCH T,I.NSTE
JRST NOSKIP ;NOW DO PRINTOUT
;HERE FOR ALL SKIP INSTRUCTIONS
SKP: JUMPN W1,SETEA ;SKIP CLASS - AC FIELD ZERO?
JUSTE: TLOA F,EA ;YES, JUST PRINT E
;INTERPRET SHIFT COMBINED INSTRUCTIONS
DBLI: TLO F,FAC+DFAC+IMM ;REMEMBER 2 ACS USED, IMMEDIATE
JRST DOIT ;EXECUTE NORMALLY
;STILL IFE FTFILE
;INTERPRET TEST CLASS INSTRUCTIONS
TESTS: TRNN F,10000 ;SKIP ON TD OR TS BUT NOT ON TR OR TL
TLOA F,FAC+IMM ;IMMEDIATE MODE
TLO F,FAC+EA ;NORMAL MODE
JRST DOIT
;HERE FOR XMOVEI, XHLLI
SETIX: TLO F,FAC+IMM!XIMM ;EXTENDED IMMEDIATE INSTRUCTION
HLLZ T,I.NPC ;GET PC SECTION
JUMPN T,DOIT ;IS IT SECTION 0?
SKPS0 ;YES, ARE WE IN NON-ZERO?
SETOM I.PCREF ;YES, MUST EXECUTE IN ZERO
JRST DOIT ;GO PRINT
;STILL IFE FTFILE
;KS-10 BYTE BLT INSTRUCTIONS (BLTBU, BLTUB)
KSBBLT: SKPKS ;ON A KS?
JRST IOTS ;NO, TREAT LIKE ANY OTHER IO INSTRUCTION
SETOM I.KRCK ;YES, SET THE SPECIAL FLAG
PUSHJ P,GETAID ;FETCH APRID
KSBBL1: TXNE T,1B3 ;ARE BLTBU/BLTUB DEFINED?
JRST SETI ;YES, TREAT LIKE BLT
JRST IOTS ;NO, NORMAL IO INSTRUCTIONS
PREF: SKPKLS ;ONLY DEFINED ON A KL
POPJ P, ;ILLEGAL OTHERWISE
MOVE T,PCFLG ;GET PC FLAGS
IFN FTEXEC,<
SKPEXC> ;IF EXEC MODE
TXNE T,PC$UIO ;OR USER-I/O
JRST PREF1 ;OK TO PROCEED
POPJ P, ;ILLEGAL FOR NON-PRIV'ED USER
PREF1: PUSHJ P,GETAID ;FETCH APR OPTIONS
TXNN T,1B4 ;TEST MAGIC BIT FOR PMOVE/PMOVEM
POPJ P, ;ILLEGAL IF UNDEFINED
JRST SETEA ;ELSE ACT LIKE MOVE/MOVEM
GETAID: SKPKLS ;ONLY VALID FOR KL/KS
JRST GETAI0 ;NO, RETURN ZERO
MOVE T,PCFLG ;FETCH THE USER'S FLAGS
IFN FTEXEC,<
SKPEXC> ;IF IN EXEC MODE
TXNE T,PC$UIO ;OR USER-IO
JRST [ APRID T ;THEN WE CAN DO STRAIGHT APRID
POPJ P,] ;RETURN IT
IFN FTDEC10,< ;ASK MONITOR FOR APRID
MOVX T,%CCCSB ;CPU STATUS BLOCK POINTER
GETTAB T, ;FIND IT
JRST GETAI0 ;CAN'T, RETURN ZERO
MOVSI T,%CVSAI(T) ;INDEX INTO VARIABLES AREA
HRRI T,.GTC0V ;USE CPU0'S AREA
GETTAB T, ;ASK FOR THE APRID
> ;END IFN FTDEC10
GETAI0: SETZ T, ;NO APRID AVAILABLE
POPJ P, ;RETURN OUR ANSWER
;I/O INSTRUCTIONS
IOTS: AOSN I.KRCK ;SPECIAL KS-10 KROCK FLAG SET?
JRST JUSTAC ;YES, JUST PRINT THE AC
ANDI W1,7 ;ONLY 3 BITS OF I/O OPCODE
TRNE W1,4 ;SKIP IF BLKI,DATAI,BLKO,DATAO
CAIN W1,5 ;SKIP IF NOT CONI
TLOA F,EA ;MEM REF INSTRUCTION
JUSTI: TLO F,IMM ;IMMEDIATE INST
JRST DOIT
;STILL IFE FTFILE
;ALL PATHS CONVERGE HERE
CHEKIS: TRC F,3000 ;HERE TO TEST FOR IMMEDIATE OR SELF MODE
TRCE F,3000 ;SKIP IF SELF MODE
JRST CHECKI ;NO, CHECK IMMEDIATE
JRST SKP ;YES, GO TEST FOR NONZERO AC FIELD
SET: ANDI F,3000 ;HERE FOR SETZX,SETOX
CAIE F,2000 ;SETZM,SETOM?
TLO F,FAC ;NO, AC IS ALWAYS AFFECTED
TRNE F,2000 ;SETZM,SETZB,SETOM,SETOB?
TLO F,EA ;YES, MEM IS ALWAYS AFFECTED
JRST DOIT
;PC-SECTION REFERENCE INSTRUCTIONS
IBLT: MOVE R,I.NPC ;GET THE ORIGINAL INSTRUCTION
PUSHJ P,FETCHI ;UNDAMAGED BY DDT
POPJ P, ;SOMETHING WENT WRONG
MOVEM T,I.NST ;ERASE ANY INSTRUCTION "FIX UP"
IEXTEND:HLLZ T,I.NPC ;GET PC SECTION
CAME T,SECDDT ;SAME AS US?
SETOM I.PCREF ;NO, SPECIAL
JRST SETI ;GO SET FLAGS
IJSYS: HLLZ T,I.NPC ;GET PC SECTION
CAME T,SECDDT ;SAME AS US?
SETOM I.PCREF ;NO, SET FLAG
JRST DOIT ;AND GO EXECUTE
;FIXED POINT MULTIPLY AND DIVIDE (NOT INCLUDING IMULX)
MULDIV: ANDI F,3000 ;MASK MODE BITS
CAIE F,2000 ;TO MEMORY ONLY?
TLO F,DFAC ;NO, INST USES 2 AC'S
CHECKI: TRNE F,1000 ;TEST FOR IMMEDIATE MODE INST
TRNE F,2000
SETEA: TLOA F,FAC+EA ;MEM REF INSTRUCTION
SETI: TLO F,FAC+IMM ;IMMEDIATE MODE INSTRUCTION
;CONTINUED ON NEXT PAGE
;STILL IFE FTFILE
;CONTINUED FROM PREVIOUS PAGE
DOIT: EXCH F,FLAGS ;RESTORE NORMAL DDT FLAGS
SETZM SKPCT ;NOTE NUMBER OF SKIPS
IFN FTDEC20,< ;HANDLE TOPS-20 ERCAL/ERJMP
MOVE R,I.NPC ;ADDRESS OF INSTRUCTION ABOUT TO BE XCT'ED
HRRI R,1(R) ;ADDRESS FOLLOWING
PUSHJ P,FETCHI ;SEE WHAT FOLLOWS INSTRUCTION
JRST DOITX ;WHO KNOWS - JUST GO DO IT
MOVEM T,I.NECJ ;SAVE INCASE ERCAL/ERJMP
LSH T,<^L<@>-^D36> ;WANT JUST OP AND AC FIELDS
CAIL T,<<ERJMPR>_<^L<@>-^D36>> ;IN RANGE OF ERJMPX/ERCALX
CAILE T,<<ERCAL>_<^L<@>-^D36>> ; INSTRUCTIONS?
JRST DOITX ;NO - TREAT NORMALLY
XMOVEI W2,DOITC3 ;GET ERCAL RETURN ADDRESS
TRZN T,1 ;ERCALX OR ERJMPX?
XMOVEI W2,DOITJ3 ;ERJMPX, DIFFERENT RETURN
SKIPE I.PCREF ;EXECUTING OUT OF SECTION?
JRST DOIT1 ;YES, DEAL WITH IT
MOVEM W2,I.ECJA ;NO, SAVE ERJMPX RETURN ADDRESS
ANDI T,17 ;GET THE AC FIELD ONLY
LSH T,-1 ;MAKE AN INDEX INTO ERTAB
MOVE S,T ;SAVE IT SOMEWHERE SAFE
MOVE R,I.NPC ;GET ORIGINAL INSTRUCTION
PUSHJ P,FETCHI ;WITHOUT DDT'S MUNGING ON IT
SETZ T, ;CAN'T TELL?
CAMN T,[ERSTR%] ;IS IT A WIERD ONE?
JRST @ERSTAB(S) ;YES, HANDLE SPECIALLY
JRST @ERTAB(S) ;NO, NORMAL CASE
DOIT1: LSH T,<^D36-^L<@>> ;SHIFT BACK TO NORMAL OPCODE
MOVEM T,I.NERJ ;SAVE PROTO INSTRUCTION
MOVE R,I.NPC ;GET INSTRUCTION
PUSHJ P,FETCHI ; AS IT WAS BEFORE DDT MUNGED IT
SETZ T, ;CAN'T??
XMOVEI W1,DOITJ1 ;NORMAL ERJMP-NOT-TAKEN RETURN
CAMN T,[ERSTR%] ;FUNNY JSYS?
XMOVEI W1,DOITX3+1 ;YES, TREAT LIKE NORMAL SKIP RETURN
JRST DOXX1 ;GO DO OUT-OF-SECTION STUFF
;STILL IFE FTFILE AND IFN FTDEC20
ERSTAB: IFIW ERR ;NOT DEFINED
IFIW ERR ;NOT DEFINED
IFIW ERR ;NOT DEFINED
IFIW ERR ;NOT DEFINED
IFIW ERR ;NOT DEFINED
IFIW ERSCJR ;ERCALR/ERJMPR
IFIW ERSCJS ;ERCALS/ERJMPS
IFIW ERSCJ ;ERCAL/ERJMP
ERTAB: IFIW ERR ;NOT DEFINED
IFIW ERR ;NOT DEFINED
IFIW ERR ;NOT DEFINED
IFIW ERR ;NOT DEFINED
IFIW ERR ;NOT DEFINED
IFIW DO.CJR ;ERCALR/ERJMPR
IFIW DO.CJS ;ERCALS/ERJMPS
IFIW DO.CJ ;ERCAL/ERJMP
;HERE IF ERSTR% FOLLOWED BY AN ERCALX/ERJMPX IN DDT'S SECTION
ERSCJR: ERXCT <ERJMPR @I.ECJA>;EXECUTE AND RETURN ERROR CODE
JRST DOITX3+1 ;TREAT LIKE NORMAL SKIP
JRST DOITX3+2 ;TREAT LIKE NORMAL DOUBLE SKIP
ERSCJS: ERXCT <ERJMPS @I.ECJA>;EXECUTE AND SUPPRESS ERROR CODE
JRST DOITX3+1 ;LIKE NORMAL SKIP
JRST DOITX3+2 ;LIKE NORMAL DOUBLE SKIP
ERSCJ: ERXCT <ERJMP @I.ECJA>;DO THE EXECUTE
JRST DOITX3+1 ;NORMAL SKIP
JRST DOITX3+2 ;NORMAL DOUBLE SKIP
IFL <SKPMAX-2>,<PRINTX ? SKPMAX TOO SMALL, MUST BE AT LEAST TWO>
;STILL IFE FTFILE AND IFN FTDEC20
;HERE IF INSTRUCTION FOLLOWED BY ERCALX/ERJMPX IN DDT'S SECTION
DO.CJR: ERXCT <ERJMPR @I.ECJA>;EXECUTE AND RETURN ERROR CODE
JRST DOITJ1 ;JOIN COMMON CODE
DO.CJS: ERXCT <ERJMPS @I.ECJA>;EXECUTE AND SUPPRESS ERROR CODE
JRST DOITJ1 ;JOIN COMMON CODE
DO.CJ: ERXCT <ERJMP @I.ECJA>;DO THE EXECUTE
DOITJ1: $XSAVE ;SAVE USER'S NEW CONTEXT
MOVSI T,FECJS ;FLAG ER/JMP DIDN'T
IORM T,FLAGS ;SET IN $X FLAGS
MOVEI T,2 ;USER PC INCREMENTS BY 2
;NOTE THAT WE HAVE NO WAY OF DETERMINING
;IF THE ERCAL/JMP EVEN GOT EXECUTED -
;CONSIDER MOVE/ERJMP VERSUS SKIPA/ERJMP
JRST DOITX7 ;COMMON CODE
DOITC3: $XSAVE ;SAVE USER'S CONTEXT
MOVSI T,FECJ ;FLAG ERCAL JUMPED
JRST DOITJ5 ;COMMON CODE
DOITJ3: $XSAVE ;SAVE USER'S CONTEXT
MOVSI T,FEJJ ;FLAG ERJMP JUMPED
DOITJ5: IORM T,FLAGS ;SET IN $X FLAGS
MOVEI T,1 ;USER PC INCREMENTS BY ONE
JRST DOITX7 ;COMMON CODE
> ;END IFN FTDEC20
;STILL IFE FTFILE
;HERE FOR NORMAL INSTRUCTION EXECUTION
DOITX: SKIPE I.PCREF ;NORMAL EXECUTE?
JRST DOXX ;NO, IN ANOTHER SECTION
DOITX1: $XRET ;RESTORE USER'S CONTEXT
DOITX2: XCT I.NST ;EXECUTE THE INSTRUCTION
;(IF IN EXEC MODE THIS MAY BE PXCT)
DOITX3: REPEAT SKPMAX,<AOS SKPCT> ;NOTE COUNT OF SKIPS
DOITX5: $XSAVE ;SAVE USER'S CONTEXT
DOITX6: MOVEI T,SKPMAX+1 ;MAX AMOUNT CAN BE SKIPPED
SUB T,SKPCT ;MINUS THOSE NOT SKIPPED
DOITX7: SETZM SKPCT ;RESET SKIP COUNTER
ADD T,PCWRD ;ADJUST USER PC ACCORDINGLY
HRRM T,PCWRD ;SET NEW USER PC
JRST NOSKP1
;STILL IFE FTFILE
;HERE TO HANDLE EXECUTION IN ANOTHER SECTION
DOXX: SETOM I.NXIT ;IT'S DANGEROUS IF WE HAVE TO CHANGE SECTIONS
SKIPN BPBLK ;DO WE HAVE A GLOBAL BPT/EXECUTE BLOCK?
JRST DOXX5 ;NO, SECTIONS MUST BE MAPPED TOGETHER
XMOVEI W1,DOITX3 ;ADDRESS TO RETURN TO
SETZ W2, ;WANT SKIPS COUNTED
DOXX1: LDB T,[POINT 23,I.NST,35] ;GET I,X,Y FROM I.NST
CAME T,[Z @I.NSTE] ;WAS IT FIXED UP INTERNALLY?
JRST DOXX2 ;NO, LEAVE IT ALONE
HRR T,BPBLK ;YES, RE-FIX IT UP
ADDI T,BPB$X ;THIS IS WHERE INSTRUCTION BLOCK STARTS
DPB T,[POINT 23,I.NST,35] ;PUT IT WHERE $XBLK CAN FIND IT
DOXX2: HLLZ T,I.NPC ;GET INSTRUCTION'S SECTION
PUSHJ P,$XBLK ;GO SET THE BLOCK
SKIPGE I.NXIT ;DANGEROUS INSTRUCTION?
JRST RESTRX ;YES, RESTORE USER CONTEXT FOR EXECUTION
MOVEM T,SWAP ;NO, JUST SET "RETURN" ADDRESS
JRST SWAP+1 ;RESTORE CONTEXT AND EXECUTE
;HERE WITH NO $4M BLOCK, MUST EXECUTE IN ACTUAL USER-INSTRUCTION SECTION
DOXX5: HLLZ R,I.NPC ;GET INSTRUCTION'S PC SECTION
CAMN R,SECDDT ;SAME SECTION AS DDT?
JRST DOITX1 ;YES, ALL SET THEN
PUSHJ P,RWEMAP ;NO, ARE WE MAPPED TO THAT SECTION?
JRST $XBLKE ;NOT MAPPED, NO $4M BLOCK, ERROR
XMOVEI TT,DOXX9 ;OUR-SECTION REFERENCE ADDRESS
MOVEM TT,I.XJRS ;SET THE RETURN-TO-SECTION FLAG
HLLZM R,SECDDT ;FORCE PROPER SKPS0/SKPNS0 ACTION
HRRI R,DOXX7 ;OUR XCT WITHIN THAT SECTION
XJRST R ;EXECUTE USER INSTRUCTION IN USER SECTION
DOXX7: JSP T,RESTOR ;RESTORE FULL USER CONTEXT
XCT I.NST ;EXECUTE THE INSTRUCTION
;(IF IN EXEC MODE THIS MAY BE PXCT)
REPEAT SKPMAX,<AOS SKPCT> ;NOTE COUNT OF SKIPS
XJRST I.XJRS ;NOW SECTION-CHANGE BACK TO DOXX9
DOXX9: JSR SAVE ;SAVE FULL USER CONTEXT
JRST DOITX6 ;FINISH UP SIMULATION OF THIS INSTR
;STILL IFE FTFILE
;HERE AFTER SIMULATING OR EXECUTING INSTRUCTION. PERFORM REQUIRED CLEANUP.
NOSKIP: $XSAVE ;SAVE USER'S CONTEXT
NOSKP1: SETOM LASTPG ;IN CASE PAGE FAULT EVEN ON "SAFE" INST.
CAIA ;INSTEAD OF JRST TELLX
TELL: EXCH F,FLAGS ;GET DDT'S FLAGS
TELLX: MOVE T,[SCHR,,SCH] ;RESTORE TEMP DISPLAY MODES SINCE
IFN FTMON,<
CHKOUT> ;GIVE UP MDDT LOCK.
BLT T,ODF ; DANGEROUS XCT RESTORES PERM MODES
SKIPL T,I.NJMP ;UNCONDITIONAL JUMP ADDRESS SPECIFIED?
MOVEM T,PCWRD ;YES, BECOMES NEW USER PC
HRRZ T,FLAGS ;GET ORIGINAL OPCODE
CAIE T,(PUSHJ) ;DO WE NEED TO PUT SOMETHING
CAIN T,(PUSH) ; ONTO THE STACK?
CAIA ;YES, WE DO
JRST TELLX1 ;NOPE
MOVE W1,I.NSTA ;RECOVER THE STACK POINTER AC
PUSHJ P,ADRSTK ;FIND WHERE IT'S POINTING
MOVE T,I.NSTP ;GET THE QUANTITY TO BE PUSHED
PUSHJ P,DEPMEM ;AND "PUSH" IT
POPJ P, ;CAN'T
;CONTINUED ON NEXT PAGE
;STILL IFE FTFILE
;CONTINUED FROM PREVIOUS PAGE
;NOW DETERMINE WHAT, IF ANYTHING, TO TYPE OUT
TELLX1: TXNE F,CCF ;IF $$X, DON'T PRINT ANYTHING
JRST NXTIT
EXCH F,FLAGS ;RESTORE $X'S FLAGS
PUSH P,SCH ;SAVE CURRENT OUTPUT MODE
TLNE F,FLA ;FLOATING AC?
MOVEI SCH,TFLOT ;YES, SETUP TO OUTPUT IN FLOATING PT
TLNE F,BPA ;BYTE POINTER AC?
MOVEI SCH,TBPNT ;YES, SET TO TYPE BYTE POINTER
TLNE F,FAC ;AC TO BE PRINTED?
PUSHJ P,FAC0 ;YES, DO IT
TLNE F,DFAC ;INST USE 2 ACS?
PUSHJ P,DBL0 ;YES, PRINT LOW-ORDER AC
TLNE F,QFAC ;INST USE 4 ACS?
PUSHJ P,QDBL0 ;YES, PRINT LOWER-ORDER ACS
TLNE F,FLG ;INSTRUCTION ACCESS THE FLAGS?
PUSHJ P,FLG0 ;YES, PRINT FLAGS
MOVE SCH,(P) ;RESTORE OLD MODE
TLNE F,FLE ;FLOATING MEMORY OPERAND?
MOVEI SCH,TFLOT ;YES, SETUP FLTG OUTPUT
TLNE F,BPE ;C(E) A BYTE POINTER
MOVEI SCH,TBPNT ;YES - TYPE AS SUCH
TLNE F,IMM ;IMMEDIATE MODE?
PUSHJ P,IMM0 ;YES, JUST PRINT E
TLNE F,EA ;MEM REF INST?
PUSHJ P,PEA ;YES, PRINT C(E)
TLNE F,DEA ;DOUBLE-WORD MEM OPERAND?
PUSHJ P,DEA0 ;YES, OUTPUT 2ND WORD
TLNE F,QEA ;QUAD-WORD MEM OPERAND?
PUSHJ P,QDEA0 ;YES, PRINT 3RD AND 4TH WORDS
POP P,SCH ;RESTORE CURRENT OUTPUT MODE
TLNN F,EA2 ;SECOND EFFECTIVE ADDRESS?
JRST NOSKIQ ;NO
MOVE T,I.NEA2 ;YES - GET E(C(E))
EXCH T,I.NSTE ;E:=E(C(E))
MOVEM T,I.NEA2 ;REMEMBER E
TLNE F,IMM2 ;SECOND E IMMEDIATE?
PUSHJ P,IMM0 ;YES - TYPE E(C(E))
TLNN F,IMM2 ;SECOND E IMMEDIATE?
PUSHJ P,PEA ;NO - TYPE E(C(E))/C(E(C(E)))
MOVE T,I.NEA2 ;GET FIRST E BACK
EXCH T,I.NSTE ;AND RESTORE TO RIGHTFUL PLACE(S)
NOSKIQ: EXCH F,FLAGS ;RESTORE DDT FLAGS
PUSHJ P,TCRLF ;OUTPUT CRLF
;CONTINUED ON NEXT PAGE
;STILL IFE FTFILE
;CONTINUED FROM PREVIOUS PAGE
;NOW TEST WHETHER TO CONTINUE, AND PRINT NEXT INST IF REQUIRED.
NXTIT: AOS I.LOG ;COUNT $X CYCLES
IFN FTDEC20,< ;HANDLE TOPS-20 ERCAL/ERJMP
EXCH F,FLAGS ;BACK TO $X FLAGS
TLZE F,FECJ ;FORCED ERCAL TO JUMP?
JRST NXTIT2 ;YES
TLZN F,FEJJ ;DID AN ERJMP JUMP?
JRST NXTIT6 ;NO
SKIPA T,[<<JRST>_<^L<@>-^D36>>] ;FAKE AN ERJMP
NXTIT2: MOVEI T,<<PUSHJ 17,>_<^L<@>-^D36>> ;FAKE AN ERCAL
DPB T,[POINT 13,I.NECJ,12] ;FAKE OUT THE ERCAL/ERJMP
MOVE R,I.NPC ;PC OF ORIGINAL USER INSTRUCTION
HRRI R,1(R) ;ADVANCE BY ONE (ADDR OF ERCAL/ERJMP)
MOVEM R,I.NPC ;NOTE NEW INSTRUCTION PC
SKIPL I.REP ;INDEFINITE $$X'ING?
MOVEM R,LOCSAV ;NO, UPDATE LOCSAV TOO
EXCH F,FLAGS ;BACK TO DDT FLAGS
TXNE F,CCF ;$$X MODE?
JRST NXTIT4 ;YES, DON'T TYPE ANYTHING
MOVE T,R ;ADDRESS OF ERCAL/ERJMP INTO T
PUSHJ P,PINST ;SHOW USER WHAT WE ARE ABOUT TO DO
PUSHJ P,TCRLF ;<CR><LF>
NXTIT4: EXCH F,FLAGS ;BACK TO $X FLAGS
MOVE R,I.NPC ;GET R BACK
MOVE T,I.NECJ ;FETCH FAKE ERCAL/ERJMP
JRST $X03 ;AND GO SIMULATE THE REAL THING
NXTIT6: EXCH F,FLAGS ;BACK TO DDT FLAGS
> ;END OF IFN FTDEC20
;CONTINUED ON NEXT PAGE
;STILL IFE FTFILE
;CONTINUED FROM PREVIOUS PAGE
AOSN I.PXC ;CALL FROM $PX?
JRST CPOPJ1 ;YES, RETURN NOW, QUIETLY
MOVE T,PCWRD ;FETCH NEW PC
XMOVEI W1,XEC5 ;INTERNAL LIMITS
XMOVEI W2,XEC6 ;OF INSTR$X RETURNS
CAML T,W1 ;DID WE JUST $X A RETURN FROM
CAML T,W2 ;(E.G.) PUSHJ P,SUBRTN$X WHICH BREAKPOINTED?
JRST NXTIT8 ;NO
SETZM BPTIP ;YES, NO LONGER BREAKPOINT IN PROGRESS
JRST (T) ;JUST QUIT (DON'T $X DDT ITSELF)
NXTIT8: SKIPL I.REP ;INDEFINITE $$X IN PROGRESS?
JRST NXT0 ;NO
CAML T,LLIMIT ;YES, IS USER PC NOW WITHIN
CAMLE T,ULIMIT ;STOPPING LIMITS?
CAIA ;NO.
JRST $XQUIT ;YES, STOP ITERATION NOW
NXT0: PUSHJ P,LISCK ;HAS USER TYPED ANYTHING?
JRST NXT1 ;NO, CONTINUE
JRST $XQUIT ;NO, ABORT THE $$X
MOVEI W1,[ASCIZ\Executing: \] ;YES, NICE TEXT
PUSHJ P,TSTRG ;TELL USER
MOVE T,PCWRD ;GET THE NEW $X PC
PUSHJ P,LI1 ;AND TELL USER THAT TOO
PUSHJ P,TCRLF ;CAP OFF LINE
JRST NXT1 ;AND CONTINUE $X'ING
;STILL IFE FTFILE
$XQUIT: SETZM I.REP ;YES, STOP ITERATION BY ZEROING COUNTER
TXZ F,CCF ; AND CLEARING CONTROL FLAG
NXT1: TXNE F,CCF ;$$ STILL IN EFFECT?
JRST NXT2 ;YES, DON'T PRINT ANYTHING
IFN FTDEC20,<
EXCH F,FLAGS ;GET $X FLAGS AGAIN
TLZN F,FECJS ;NEED TO INDICATE ERCAL/ERJMP?
JRST NXT1A ;NO, CONTINUE
EXCH F,FLAGS ;BACK TO DDT FLAGS
MOVEI W1,[ASCIZ "<ERSKP>"] ;MESSAGE
JRST NXT1D ;JOIN COMMON TYPEOUT CODE
NXT1A: EXCH F,FLAGS ;BACK TO DDT FLAGS
> ;END OF IFN FTDEC20
MOVE T,PCWRD ;NO, GET CURRENT PC AGAIN
MOVE W1,LOCSAV ;AND OLD PC
HRRI W1,1(W1) ;INCREMENT OLD PC
CAMN T,W1 ;DID PC SIMPLY GO TO PC+1?
JRST NXT1P ;YES--JUST CONTINUE
MOVE W2,W1 ;W1:=LOWER LIMIT
ADDI W2,SKPMAX ;W2:=UPPER LIMIT
CAML T,W1 ;IS THE NEW USER PC
CAMLE T,W2 ;WITHIN "SKIP" RANGE?
JRST NXT1C ;NO, GO TYPE <JUMP>
SUB T,W1 ;GET COUNT OF SKIPS
PUSH P,T ;SAVE FOR ITERATION
MOVEI W1,[ASCIZ "<SKIP"] ;SKIP
PUSHJ P,TSTRG ;TYPE IT
SOSG 0(P) ;MULTIPLE SKIPS?
JRST NXT1B ;NO, JUST CLOSE
PUSHJ P,TSPC ;TYPE A SPACE
MOVE T,0(P) ;GET # BACK
ADDI T,"0"+1 ;TO ASCII, COMPENSATE FOR SOSG
PUSHJ P,TOUT ;TYPE # OF SKIPS
NXT1B: POP P,0(P) ;CLEAN UP STACK
MOVEI T,">" ;CLOSE OFF SKIP MESSAGE
PUSHJ P,TOUT ;TYPE IT
JRST NXT1E ;COMMON CODE TO END LINE
NXT1C: MOVEI W1,[ASCIZ "<JUMP>"] ;JUMP
NXT1D: PUSHJ P,TSTRG ;SAY IT
NXT1E: PUSHJ P,TCRLF ;ADD CRLF
NXT1P: PUSHJ P,TTYCLR ;FLUSH ANY TYPEAHEAD AND RESET ^O
MOVE T,PCWRD ;FETCH CURRENT PC AGAIN
PUSHJ P,PINST ;PRINT INSTRUCTION ABOUT TO BE EXECUTED
SKIPE I.REP ;ARE WE STILL LOOPING?
PUSHJ P,TCRLF ;YES, PRINT CRLF AFTER INST
NXT2: SKIPE I.REP ;SKIP IF REPEAT COUNTER IS ZERO
PJRST $X00 ;NONZERO, REPEAT $X CYCLE AGAIN
AOS (P) ;TIME TO RETURN, MARK SUCCESSFUL COMPLETION
POPJ P, ;AND RETURN
;STILL IFE FTFILE
;OUTPUT ROUTINES
;ROUTINE TO PRINT THIRD AND FOURTH ACCUMULATORS
QDBL0: PUSHJ P,DBL0 ;PRINT ANOTHER AC
;AND FALL INTO PRINTING FOURTH AC
;ROUTINE TO PRINT SECOND ACCUMULATOR
DBL0: AOS T,I.NSTAC ;INCREMENT AC NUMBER
TRZA T,777760 ;ENSURE 17 WRAPS AROUND TO 0
;ROUTINE TO PRINT CONTENTS OF ACCUMULATOR
FAC0: MOVE T,I.NSTAC ;FETCH AC NUMBER
JRST PEA2
;ROUTINE TO PRINT THE FLAGS
FLG0: PUSHJ P,TTAB ;PRINT TAB
MOVE T,PCWRD ;GET NEW INSTRUCTION PC
TLNE T,-1 ;USER PC IN NON-ZERO SECTION?
MOVE T,PCFLG ;YES, GET FULL WORD PC FLAGS
HLRZ T,PCFLG ;NO, GET HALF WORD PC FLAGS
PJRST TOC ;AND OUTPUT PC FLAGS
;ROUTINE TO PRINT JUST E FOR AN IMMEDIATE MODE INSTRUCTION
IMM0: PUSHJ P,TTAB ;PRINT TAB
MOVE T,I.NSTE ;FETCH E
TLNN F,XIMM ;WANT ALL 30 BITS?
TLZA T,-1 ;NO, JUST TYPE 18 BITS
ANDX T,VMADR ;YES, JUST TYPE 30 BITS
TLNE F,FLE ;FLTG PT MEM OPERAND?
HRLZ T,T ;YES, IMMEDIATE USES E,,0
EXCH F,FLAGS ;RESTORE DDT FLAGS
PUSHJ P,CONSYM ;OUTPUT CONTENTS OF T
JRST PEA6 ;RESTORE $X FLAGS AND RETURN
;STILL IFE FTFILE
;ROUTINE TO PRINT 3RD AND 4TH MEMORY OPERANDS
QDEA0: PUSHJ P,DEA0 ;PRINT 3RD MEMORY OPERAND
;AND FALL INTO PRINTING FOURTH OPERAND
;ROUTINE TO PRINT 2ND MEMORY OPERAND
DEA0: MOVE T,I.NSTE ;FETCH ADDRESS OF OPERAND
HRRI T,1(T) ;ADVANCE TO NEXT ONE
MOVEM T,I.NSTE ;SAVE FOR EVEN MORE CALLS
;ROUTINE TO PRINT MEMORY OPERAND
PEA: MOVE T,I.NSTE ;FETCH ADR OF MEM OPERAND
PEA2: EXCH F,FLAGS ;HERE FROM DBL0,FAC0
PUSH P,T ;SAVE ARG
PUSHJ P,TTAB ;OUTPUT TAB
POP P,T ;RESTORE ADR OF LOC TO BE PRINTED
PUSHJ P,LI1 ;PRINT ADR/ CONTENTS
PEA6: EXCH F,FLAGS ;RESTORE $X FLAGS
POPJ P,
;ROUTINE TO PRINT INSTRUCTION ALWAYS IN SYMBOLIC DESPITE CURRENT MODE
;
;IF THE PC IS "IN THE ACS" THEN THE ADDRESS TYPED WILL BE ONLY THE
;REGISTER ADDRESSED.
PINST: PUSH P,SCH ;SAVE CURRENT OUTPUT MODE
MOVEI SCH,PIN ;SET TO PRINT SYMBOLIC INST MODE
MOVEM T,LLOC ;NEW LAST LOCATION
MOVEM T,LLOCO ;NEW LAST LOCATION OPEN
TRNN T,777760 ;PC IN THE ACS?
ANDI T,17 ;YES, REDUCE TO JUST REGISTER ADDRESS
PUSHJ P,LI1P ;LIST "PC" AND INSTRUCTION
POP P,SCH ;RESTORE CURRENT MODE
> ;END IFE FTFILE FROM PAGES AGO
IFN FTFILE,<XEC==ERR>
POPJ P,
SUBTTL COMMAND ROUTINES -- WATCHING
WATCH: TXZE F,FAF!SAF!Q2F ;WE TAKE ONLY A SINGLE ARGUMENT
JRST ERR ;AND USER TYPED SOMETHING ELSE
TXNN F,QF ;USER TYPE EXPLICIT ADDRESS TO WATCH?
SKIPA T,LLOCO ;NO, USE LAST LOCATION OPENED
PUSHJ P,CEFFAX ;DEFAULT SECTION IF NEEDED
MOVEM T,WTCHA ;SAVE ADDRESS
PUSHJ P,TCRLF ;START A NEW LINE
MOVE R,WTCHA ;GET ADDRESS TO BE WATCHED
PUSHJ P,FETCH ;GET IT
JRST ERR ;ADDRESSING ERROR
JRST WATCH3 ;AND TYPE IT OUT
;LOOP LOOKING AT THE WORD, WATCHING FOR A CHANGE
WATCH1:
IFN FTDEC10,< ;TOPS-10 QUICK NAP
SETZ T, ;0 SECONDS = 1 CLOCK TICK
IFN FTEXEC,<
SKPEXC> ;BUT NO MONITOR CALLS IN EXEC MODE
SLEEP T, ;PAUSE A MOMENT
> ;END IFN FTDEC10
IFN FTDEC20,< ;TOPS-20 QUICK NAP
MOVEI T1,^D16 ;16 MILLISECONDS = 1 CLOCK TICK
IFN FTEXEC,<
SKPEXC> ;BUT NO MONITOR CALLS IN EXEC MODE
DISMS% ;PAUSE A MOMENT
> ;END IFN FTDEC20
MOVE R,WTCHA ;ADDRESS AGAIN
PUSHJ P,FETCH ;READ IT
JRST ERR ;BLETCH - THE WORD WENT AWAY
CAMN T,WTCHW ;HAS THE WORD CHANGED?
JRST WATCH5 ;NO
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
WATCH3: MOVEM T,WTCHW ;SAVE NEW WORD VALUE
MOVE T,R ;GET WORD ADDRESS
PUSHJ P,PADR ;AND PRINT IT
PUSHJ P,TSEP ;SEPARATOR TEXT
MOVE T,WTCHW ;GET THE NEW WORD VALUE
PUSHJ P,CONSYM ;AND TYPE IT OUT TOO
PUSHJ P,TCRLF ;CAP OFF THE LINE
SETOM WTCHC ;AND DO A LISTEN
WATCH5: SOSL WTCHC ;TIME FOR A LISTEN?
JRST WATCH1 ;NO, JUST KEEP WATCHING
MOVEI W,^D60 ;YES, RESET LISTEN COUNTER
MOVEM W,WTCHC ; . . .
PUSHJ P,LISCK ;ANYTHING TYPED?
JRST WATCH1 ;NO, KEEP WATCHING
JRST DD1 ;YES, ABORT THE WATCH
;HERE TO ISSUE "STATUS" WITHOUT ABORTING THE WATCH
MOVEI W1,[ASCIZ\Watching: \] ;NICE TEXT
PUSHJ P,TSTRG ;TYPE IT OUT
MOVE T,WTCHA ;CURRENT ADDRESS
PUSHJ P,LI1 ;TYPE IT OUT
PUSHJ P,TCRLF ;CAP OFF TEXT MESSAGE
MOVE T,LWT ;GET THE DISPLAYED CONTENTS
MOVEM T,WTCHW ;AND SAVE IT AS THE LAST VALUE SEEN
JRST WATCH1 ;LOOP BACK AND CHECK AGAIN
SUBTTL COMMAND ROUTINES -- SEARCHING
EFFEC: MOVSI R,(CAIE T,0) ;FAILS IF ANY BITS DIFFER
TXO F,LTF ;FLAG EFFECTIVE ADDRESS SEARCH
JRST WORD1 ;ENTER MAIN SEQUENCE
NWORD: SKIPA R,[CAIN T,0] ;NOT-WORD, FAILS IF ALL BITS SAME
WORD: MOVSI R,(CAIE T,0) ;WORD SEARCH, FAILS IF ANY BITS DIFFER
TXZ F,LTF ;INDICATE NO EFFECTIVE ADDR SEARCH
WORD1: MOVEM R,SEAXCT ;SET MODE "FLAG" (XCT'ED AT SEAR2)
TXNN F,Q2F ;SECOND QUANTITY?
TXZN F,QF ;QUANTITY TO SEARCH FOR TYPED?
JRST ERR ;SYNTAX ERROR
TXNE F,LTF ;EFFECTIVE ADDRESS SEARCH?
PUSHJ P,CEFFAX ;DEFAULT SECTION IF NEEDED
SETCAM T,WRD ;SAVE SO AS TO NOT FIND IN SEARCH
MOVSI T,FRASE-DEN-1 ;PREVENT TYPE OUT OF DDT PARTS
SETCMM FRASE(T) ;COMPLEMENT SO WON'T BE MATCHED
AOBJN T,.-1 ;ONE BY ONE
TXZ F,STF ;DO NOT SUPPRESS TYPEOUT (IN LI1)
TXNE F,SAF ;WAS GIVEN EXPLICITLY?
TXO F,QF ;YES, SIMULATE A $Q TYPED
PUSHJ P,SETUP ;SETUP DEFAULT LIMITS
PUSHJ P,TCRLF ;CLEAN OUTPUT
PUSHJ P,PSHLLC ;PRESERVE PC SEQUENCE
TXNE F,CCF ;IF WANT A COUNT,
SETZM SYL ;CLEAR THE COUNT OF MATCHES
;FALL INTO MAIN SEARCH LOOP ON NEXT PAGE
;FALL HERE FROM PREVIOUS PAGE
SEAR1: CAMLE R,ULIMIT ;REACHED END OF SEARCH LIMIT?
JRST SEARFN ;YES, END OF SEARCH
PUSHJ P,FETCH ;GET CURRENT WORD TO SEE IF IT MATCHES
JRST [MOVEI R,777 ;FETCH FAILED, BUMP TO NEXT PAGE
IORB R,LLIMIT ;PUT AT BOTTOM OF NONEX PAGE
JRST SEAR2A] ;CONTINUE SEARCH
TXNN F,LTF ;CHECK FOR EFFECTIVE ADDRESS SEARCH
JRST SEAR1B ;NORMAL WORD SEARCH
HLLZ S,LLIMIT ;EFFEC ADR - PRESET CURRENT SECTION
PUSHJ P,CEFFIX ;CALCULATE EFFECTIVE ADDRESS
JRST SEAR2A ;SKIP THIS WORD IF MEMORY READ ERROR
SEAR1B: EQV T,WRD ;FLIP SOME BITS
TXNN F,LTF ;EFFECTIVE ADDRESS OR WORD SEARCH?
AND T,MSK ;WORD SEARCH, CLEAR EXCLUDED BITS
SEAR2: XCT SEAXCT ;DO WE HAVE A MATCH?
JRST SEAR2A ;NO, ADVANCE TO NEXT LOCATION
TXNE F,CCF ;IF WANT A COUNT,
AOS SYL ;COUNT THE MATCH
MOVE T,LLIMIT ;GET MATCHED ADDRESS AGAIN
PUSHJ P,LI1 ;CALL REGISTER EXAMINATION LOGIC TO TYPE OUT
PUSHJ P,TCRLF ;POSITION TO NEXT LINE
PUSHJ P,PSHLLC ;SAVE CURRENT MATCH ON "STACK"
SETCMM LWT ;DON'T MATCH DDT'S INNARDS
SETCMM TEM ; DITTO
AOS R,LLIMIT ;GET NEXT ADDRESS
JRST SEAR2B ;AND ALWAYS DO A LISTEN
SEAR2A: AOS R,LLIMIT ;GET NEXT LOCATION
TRNN R,777 ;CHECK LISTEN ONLY ONCE PER PAGE
SEAR2B: PUSHJ P,LISCK ;ANYTHING TYPED?
JRST SEAR1 ;NO, KEEP SEARCHING
JRST SEARFN ;YES, ABORT THE SEARCH
;YES (A "?"), LIST STATUS
;HERE TO ISSUE "STATUS" WITHOUT ABORTING THE SEARCH
MOVEI W1,[ASCIZ\Searching: \] ;NICE TEXT
PUSHJ P,TSTRG ;TYPE IT OUT
MOVE T,R ;CURRENT ADDRESS
PUSHJ P,LI1 ;TYPE IT OUT
PUSHJ P,TCRLF ;CAP OFF TEXT MESSAGE
MOVE R,LLIMIT ;RESTORE R (=CURRENT ADDRESS)
JRST SEAR2B ;LOOP BACK AND CHECK AGAIN
;HERE AT THE END OF THE SEARCH - FOR ANY REASON
SEARFN: SETCMM LWT ;COMPLEMENT BITS BACK AND STOP SEARCH
SUBI R,1 ;BACKUP R TO LAST WORD ADDRESS
MOVEM R,LLOC ;SET "." TO LAST WORD SEARCHED
HLLZM R,LLOCS ;SET DEFAULT SECTION (CF. CEFIW6:)
TXZN F,CCF ;IF NOT DOUBLE-ESC,
JRST DD1 ; JUST END COMMAND NOW
MOVEI W1,[ASCIZ / Found /] ;POINT TO TEXT
PUSHJ P,TSTRG ;START IT GOING
MOVE A,SYL ;GET MATCH COUNT
JUMPE A,[MOVEI W1,[ASCIZ /no matches/] ;SIMPLE TEXT
PUSHJ P,TSTRG ;TYPE IT
PUSHJ P,TCRLF ;END THE LINE
JRST DD1] ;TAKE THE EASY WAY OUT
PUSHJ P,FP7 ;TYPE IN DECIMAL (WITHOUT THE DOT)
MOVEI W1,[ASCIZ / match/] ;TEXT SAYING WHAT WE FOUND
PUSHJ P,TSTRG ;TYPE IT
MOVEI W1,[ASCIZ /es/] ;TEXT TO MAKE IT PLURAL
SOSE SYL ;IF NOT SINGULAR,
PUSHJ P,TSTRG ; THEN MAKE PLURAL
PUSHJ P,TCRLF ;END THE LINE
JRST DD1 ;FINALLY END COMMAND
SUBTTL COMMAND ROUTINES -- COMMAND FILE INPUT
IFN FTDEC10,<
;$Y -- READ COMMAND FILE
;$$Y -- READ SYMBOL FILE (NOT YET IMPLEMENTED)
IFN FTYANK,<
TAPIN: SETZM COMAND ;IN CASE ISSUED FROM COMMAND FILE
SETZM COMCOR ; . . .
IFN FTEXEC,<
SKPEXC ;SKIP IF EXEC MODE
JRST UTAPIN ;USER MODE
CONSO PTR,400 ;TAPE IN READER?
JRST ERR ;NO - ERROR
SETZM EPTPTR ;YES. INDICATE START READING IN
SETOM COMAND ;SHOW THERE IS A COMMAND FILE
JRST DD1 ;TYPE <CR><LF> AND DO COMMANDS
> ;END IFN FTEXEC
UTAPIN: TXNN F,QF ;USER TYPE OLD WAY?
JRST TAPIN4 ;NO, PROMPT FOR FILE SPEC
SETZM FSBLK ;CLEAR SPEC AREA
MOVE R,[FSBLK,,FSBLK+1] ;BLT POINTER TO
BLT R,FSBLK+FSLEN-1 ;ZERO FILE SPEC SCAN AREA
MOVEM T,FSFIL ;TAKE HIS FILENAME
PUSHJ P,TCRLF ;GIVE A <CR><LF> FOR NEATNESS
MOVX TT,FS$NAM ;SAY HE TYPED IN A FILENAME
MOVEM TT,FSBLK ;BUT NOTHING ELSE
JRST TAPIN6 ;AND GO DEFAULT TO DSK:.DDT[-]
;HERE TO PROMPT USER FOR FULL FILE SPECIFICATION
TAPIN4: TMSG <
File: > ;PROMPT USER
MOVEI S,TAPSWT ;$Y SWITCHES TABLE
SETZM YASWF ;INITIALIZE SWITCHES
PUSHJ P,FSCAN ;READ FILE SPEC
PJRST TTYCLR ;ERROR, GIVE UP
SKIPN TT,FSBLK ;ANYTHING TYPED?
POPJ P, ;NO, JUST RETURN
TAPIN6: MOVSI T,'DSK' ;DEFAULT DEVICE
TXNN TT,FS$DEV ;EXPLICIT DEVICE?
MOVEM T,FSDEV ;NO, USE DEFAULT
MOVSI T,'DDT' ;DEFAULT EXTENSION FOR COMMAND FILE
TXNE F,CCF ;COMMAND OR SYMBOL FILE?
MOVSI T,'SYM' ;SYMBOL FILE DEFAULT EXTENSION
TXNN TT,FS$EXT ;EXPLICIT EXTENSION?
MOVEM T,FSEXT ;NO, USE DEFAULT
MOVEI T,[YFLLEN,,YFLBLK ;LEN,,ADR OF FILOP. BLOCK
YLKLEN,,YLKBLK ;LEN,,ADR OF LOOKUP BLOCK
YPTLEN,,YPTBLK ;LEN,,ADR OF PATH. BLOCK
YRFLEN,,YRFBLK] ;LEN,,ADR OF RETURNED FILESPEC BLOCK
PUSHJ P,FSFSET ;SETUP FILOP. BLOCK
HALT ERR ;INTERNAL ERROR
MOVE T,[400000+CM,,.FORED] ;READ FILE ON CHANNEL CM
MOVEM T,YFLBLK+.FOFNC ;SETUP FUNCTION WORD
MOVEI T,.IOASL ;ASCII MODE
TXNE F,CCF ;SYMBOL FILE?
MOVEI T,.IOBIN ;YES, USE BINARY I/O
MOVEM T,YFLBLK+.FOIOS ;SETUP "OPEN" BLOCK I/O STATUS
MOVEI T,CBUF ;BUFFER HEADER
MOVEM T,YFLBLK+.FOBRH ;SET IN OPEN BLOCK
MOVEI T,1 ;ONLY WANT ONE INPUT BUFFER
MOVEM T,YFLBLK+.FONBF ;SET IT ALSO
MOVEI R,YBFBUF ;COMMAND BUFFER (PRE-ALLOCATED)
MOVEM R,YFLBLK+.FOBSA ;SET UP AS STARTING ADDRESS
EXCH R,.JBFF ;PERSUADE MONITOR TO PUT BUFFER THERE
MOVEI T,YBFSIZ-2 ;SIZE OF BUFFER (FUDGED FOR OVERHEAD)
MOVEM T,YFLBLK+.FOBSZ ;STORE FOR RING SETUP
MOVE T,[YFLLEN,,YFLBLK] ;FILOP. POINTER TO
FILOP. T, ;OBTAIN INPUT FILE
JRST [ EXCH R,.JBFF ;RESET .JBFF
JRST FSEFFF] ;TYPE FILOP. ERROR
EXCH R,.JBFF ;RESTORE .JBFF
CAILE R,YBFBUF+YBFSIZ ;MAKE SURE BUFFER NOT TOO BIG
JRST ERR ;WAS, FORGET IT
TXNE F,CCF ;SYMBOL FILE?
JRST TAPSY ;YES, GO READ IN THEN
TMSG <[Processing commands from >
MOVEI TT,YFLBLK ;POINT TO FILOP BLOCK
PUSHJ P,TYPFIL ;PRINT FILSPEC
TMSG <]> ;END TEXT
PUSHJ P,TCRLF ;APPEND A CRLF
SETZM CHINP ;FLAG WE
SETZM CHINC ;NOW HAVE
SETOM COMAND ;COMMAND FILE
JRST DD1 ;TYPE <CR><LF> AND DO COMMANDS
;HERE TO HANDLE SYMBOL FILES
TAPSY:
REPEAT 0,<
TMSG <[Loading symbols from >
MOVEI TT,YFLBLK ;POINT TO FILOP BLOCK
PUSHJ P,TYPFIL ;PRINT FILESPEC
TMSG <]> ;END TEXT
PUSHJ P,TCRLF ;APPEND A CRLF
>
JRST ERR ;CODE NOT YET WRITTEN . . .
;$Y SWITCHES
TAPSWT: SETOM YASWF ;A - ABORT ON COMMAND ERRORS
JRST FSEILS ;B - ILLEGAL
JRST FSEILS ;C - ILLEGAL
JRST FSEILS ;D - ILLEGAL
JRST FSEILS ;E - ILLEGAL
JRST FSEILS ;F - ILLEGAL
JRST FSEILS ;G - ILLEGAL
JRST FSEILS ;H - ILLEGAL
JRST FSEILS ;I - ILLEGAL
JRST FSEILS ;J - ILLEGAL
JRST FSEILS ;K - ILLEGAL
JRST FSEILS ;L - ILLEGAL
JRST FSEILS ;M - ILLEGAL
JRST FSEILS ;N - ILLEGAL
JRST FSEILS ;O - ILLEGAL
JRST FSEILS ;P - ILLEGAL
JRST FSEILS ;Q - ILLEGAL
JRST FSEILS ;R - ILLEGAL
JRST FSEILS ;S - ILLEGAL
JRST FSEILS ;T - ILLEGAL
JRST FSEILS ;U - ILLEGAL
JRST FSEILS ;V - ILLEGAL
JRST FSEILS ;W - ILLEGAL
JRST FSEILS ;X - ILLEGAL
JRST FSEILS ;Y - ILLEGAL
JRST FSEILS ;Z - ILLEGAL
> ;END OF IFN FTYANK
; STILL IN IFN FTDEC10
IFN FTYANK!FTFILE,<
TYPFIL: PUSH P,TT ;SAVE FILOP BLOCK ADDRESS
HRRZ TT1,.FOFSP(TT) ;GET RETURNED FILESPEC BLOCK
MOVEI TT,.FOFDV(TT1) ;POINT AT ITS DEVICE WORD
SKIPE (TT) ;IF IT WAS RETURNED VALID,
JRST TYPRF1 ;JUST USE IT
MOVE TT,(P) ;NO, RETRIEVE FILOP BLOCK ADDRESS
MOVE W1,.FODEV(TT) ;GET INITED DEVICE
MOVEM W1,.FOFDV(TT1) ;SAVE FOR TYPRFS
HLRZ W1,.FOFNC(TT) ;GET CHANNEL HALFWORD
ANDI W1,(FO.CHN) ;ISOLATE CHANNEL
DEVCHR W1, ;GET DEVICE TYPE BITS
TXNN W1,DV.TTY ;WATCH OUT FOR NUL:
TXNN W1,DV.DIR ;IF NOT A DIRECTORY DEVICE,
JRST TYPFI3 ;DON'T TYPE JUNK
HRRZ TT,.FOLEB(TT) ;GET LOOKUP/ENTER BLOCK ADDRESS
MOVE W1,.RBNAM(TT) ;FILE NAME
MOVEM W1,.FOFFN(TT1) ;SAVE FOR TYPRFS
HLLZ W1,.RBEXT(TT)
MOVEM W1,.FOFEX(TT1) ;SAVE EXTENSION FOR TYPRFS
HRRZ TT,(P) ;GET FILOP BLOCK ADDRESS BACK
HRRZ TT,.FOPAT(TT) ;GET PATH BLOCK ADDRESS
SKIPN TT ;IF NONE,
MOVEI TT,[0]-.PTPPN ;FAKE UP TO POINT TO A ZERO EVENTUALLY
SKIPN .PTPPN(TT) ;IF HAVE NO PATH TO TYPE,
JRST TYPFI3 ;THEN DON'T COPY IT
HRLI TT,.FOFPP-.FOFMX ;MAKE LH USEFUL FOR AOBJN
TYPFI2: SKIPN W1,.PTPPN(TT) ;IF END OF DIRECTORY,
JRST TYPFI3 ;GO DO IT
MOVEM W1,.FOFPP(TT1) ;NO, STORE FOR TYPRFS
ADDI TT1,1 ;UPDATE STORAGE ADDRESS
AOBJN TT,TYPFI2 ;COPY ALL RELEVANT DIRECTORY WORDS
TYPFI3: MOVE TT,(P) ;RETRIEVE FILOP BLOCK POINTER
HRRZ TT,.FOFSP(TT) ;GET RETURNED FILESPEC BLOCK ADDRESS
ADDI TT,.FOFDV ;SKIP THE JUNK
JRST TYPRF1 ;AND GO TYPE THE FILE
> ;END IFN FTYANK!FTFILE
TYPRFS: PUSH P,TT ;SAVE ADDRESS OF OUR BLOCK
TYPRF1: MOVE W1,.SGFDV(TT) ;GET THE DEVICE NAME
PUSHJ P,TSIXN ;AND TYPE IT
MOVEI T,":" ;DEVICE TERMINATOR
PUSHJ P,TOUT ;TYPE IT
SKIPN W1,.SGFNM(TT) ;IF NO FILE NAME,
JRST TYPRF3 ;THEN DON'T TYPE IT
HLRZ T,.SGFEX(TT) ;YES, GET THE EXTENSION
CAIE T,'UFD' ;IF NOT .UFD
JRST TYPRF2 ;THEN TYPE NAME IN SIXBIT
CAME W1,[-1] ;EXCEPT FOR -1,
JUMPL W1,TYPRF2 ;NEGATIVE NAME GETS SIXBIT ANYWAY
MOVEI T,"[" ;NO, IT'S A PPN
PUSHJ P,TOUT ;SO INTRODUCE IT
HLRZ W1,.SGFNM(TT) ;GET PROJECT NUMBER
PUSHJ P,TOCTW ;TYPE IN OCTAL
MOVEI T,"," ;GET THE COMMA
PUSHJ P,TOUT ;FOR A SEPARATOR
HRRZ W1,.SGFNM(TT) ;GET THE PROGRAMMER NUMBER
PUSHJ P,TOCTW ;TYPE IN OCTAL
MOVEI T,"]" ;END OF PPN
PUSHJ P,TOUT ;FLAG THAT
JRST TYPRF3 ;SKIP SIXBIT CASE
TYPRF2: PUSHJ P,TSIXN ;TYPE FILE NAME IN SIXBIT
TYPRF3: HLLZ W1,.SGFEX(TT) ;GET EXTENSION
LSH W1,-6 ;MAKE ROOM
TLO W1,'. ' ;FOR THE DOT
SKIPN .SGFEX(TT) ;IF EITHER AN EXTENSION
SKIPE .SGFNM(TT) ;OR A NAME,
PUSHJ P,TSIXN ;TYPE .EXT
SKIPN .SGFPP(TT) ;IF NO PPN,
JRST TYPRF9 ;THEN SKIP THE PATH ENTIRELY
HRLI TT,.SGFPP-.SGFLN ;SETUP FOR FULL PATH AOBJN
MOVEI T,"[" ;INTRODUCE OUR PATH
PUSHJ P,TOUT ; ...
MOVE W1,.SGFPP(TT) ;GET PPN WORD
CAME W1,[-1] ;IF NOT [%,%]
JUMPL W1,TYPRF5 ;THEN TYPE EVEN THIS IN SIXBIT
HLRZ W1,.SGFPP(TT) ;NO, GET PROJECT NUMBER
PUSHJ P,TOCTW ;TYPE IN OCTAL
MOVEI T,"," ;A COMMA
PUSHJ P,TOUT ;FOR A SEPARATOR
HRRZ W1,.SGFPP(TT) ;GET PROGRAMMER NUMBER
PUSHJ P,TOCTW ;TYPE IN OCTAL
AOBJP TT,TYPRF6 ;ADVANCE POINTER PAST THE PPN
TYPRF4: SKIPN W1,.SGFPP(TT) ;IF NO MORE PATH,
JRST TYPRF6 ;THEN CLOSE IT OFF
MOVEI T,"," ;YES,
PUSHJ P,TOUT ;SEPARATE FROM PREDECESSOR
TYPRF5: PUSHJ P,TSIXN ;TYPE THIS SFD (OR UFD?) NAME
AOBJN TT,TYPRF4 ;LOOP OVER ALL POSSIBLE PATH WORDS
TYPRF6: MOVEI T,"]" ;PUNCTUATION
PUSHJ P,TOUT ;END THE PATH
TYPRF9: POP P,TT ;RESTORE BLOCK ADDRESS
POPJ P, ;AND RETURN
> ;END IFN FTDEC10
IFE FTYANK,<TAPIN==ERR>
SUBTTL COMMAND ROUTINES -- MISCELLANEOUS COMMANDS
IFN FTFILE,<GO==ERR>
IFE FTFILE,<
;HERE ON AN $G COMMAND TO START AT USER'S ARGUMENT OR THE START ADDRESS
GO: PUSHJ P,RSTAC ;RESTORE ACS
TXNN F,QF ;EXPLICIT START ADDRESS GIVEN?
JRST GO3 ;NO, MAKE AN EDUCATED GUESS
PUSHJ P,CEFFAX ;DEFAULT SECTION IF NEEDED
;HERE WITH ADDRESS TO START AT IN T.
;WE LET RESTORE JUMP TO THE USER TO GET OUT OF DDT AS FAST AS POSSIBLE,
;IN CASE AN INTERRUPT IS PENDING.
GO1: PUSH P,T ;SAVE OVER TCRLF
PUSHJ P,TCRLF ;NEATNESS
PUSHJ P,INSRTB ;INSERT BREAKPOINTS
POP P,T ;RESTORE START ADDRESS
SETZM BPTIP ;DON'T ALLOW $X'ING AFTER $G
SKPNS0 ;IN SECTION 0?
TLNN T,-1 ;AND ADDRESS ISN'T?
JRST RESTOR ;NO, DO NORMAL THING
JRST RESTRX ;YES, USE XJRSTF EVEN IN SECTION 0
;STILL IFE FTFILE
;NO START ADDRESS, MAKE A GUESS AT ONE
GO3:
IFN FTEXEC,<SKPUSR> ;OK IN EDDT IN USER MODE
IFN FTEXEC!FTMON,<JRST ERR> ;NO SUCH COMMAND IN EDDT OR MDDT
IFN FTDEC10,<
MOVEI T,TT ;ARG BLOCK IN TT
SETZM TT ;READ FUNC CODE
ENTVC. T, ;GET ENTRY VECTOR
SETZB TT1,TT2 ;CAN'T, JUST USE JOBDAT
JUMPE TT1,GO5 ;NO ENTRY VECTOR, USE JOBDAT
PUSH P,TT1 ;SAVE LENGTH A MOMENT
MOVE R,TT2 ;GET ENTRY VECTOR ADDRESS
PUSHJ P,FETCH ;GET WHAT IT POINTS TO
JRST ERR ;TSK TSK
POP P,TT1 ;RESTORE LENGTH
CAIE TT1,(JRST) ;START-ADDR FORMAT MAKES THIS IRRELEVANT
JRST [TLNN T,(IFIW) ;IF NOT IFIW,
TLNE T,770000 ;MUST NOT LOOK LIKE INSTRUCTION
TLNN T,^-<(IFIW)> ;IFIW MUST BE PURE
JRST .+2 ;OK, KEEP THIS ADDRESS
JRST .+1] ;NO, KEEP PREVIOUS ADDRESS
SKIPA T,R ;YES, USE THE ORIGINAL ADDRESS
SETZ TT1, ;NO, USE IT AND ALLOW ANY OFFSET
> ;END IFN FTDEC10
IFN FTDEC20,<
MOVEI T1,.FHSLF
XGVEC% ;GET ENTRY VECTOR
ERJMP [GEVEC% ;DO A DIFFERENT WAY FOR PRE-5.0 MONITORS
HRRZ T3,T2 ;PUT ADDR. IN T3
HLRZS T2 ;0,,LENGTH IN T2
JRST .+1] ;CONTINUE EXECUTION
CAIN T2,(JRST) ;TOPS10 FORMAT?
JRST GO5 ;YES
SKIPLE T2 ;MUST BE POSITIVE
CAIL T2,1000 ;REASONABLE?
JRST ERR ;NO
MOVE T,T3 ;PUT START ADDR. IN T FOR RESTOR
MOVE TT1,T2 ;MOVE LENGTH INTO COMMON PLACE
> ;END IFN FTDEC20
SKIPGE T ;IF IFIW FORMAT,
HLL T,TT2 ;RELOCATE TO EVEC SECTION
TXNN F,Q2F ;SECOND QUANT? (I.E. $1G)
SETZM WRD2O ;NO, ASSUME ZERO
CAMG TT1,WRD2O ;WITHIN RANGE?
JUMPN TT1,ERR ;NO
ADD T,WRD2O ;ADD OFFSET WITHIN VECTOR
JRST GO1 ;NOW HAVE ADDR IN T, GO START THERE
GO5: ;HERE TO TRY JOBDAT
IFN FTDEC10,<HLLZ R,TT2> ;SET START ADDRESS SECTION
IFN FTDEC20,<HLLZ R,T3> ;SET START ADDRESS SECTION
HRRI R,.JBSA ;WHERE START ADDRESS LIVES
PUSHJ P,FETCH ;GO GET IT
JRST ERR ;OOPS
HLL T,R ;SET START ADDRESS SECTION
TRNN T,-1 ;ILLEGAL IF RH(.JBSA) IS ZERO
JRST ERR
TXNE F,Q2F ;IS THIS $NG FORM?
ADD T,WRD2O ;YES, ADD THE INCREMENT
JRST GO1 ;CONTINUE WITH "GO" ADDRESS IN T
> ;END IFE FTFILE
;HERE ON AN $I COMMAND -- USER CONTEXT REGISTERS
;HERE ON AN $M COMMAND -- DDT CONTROL REGISTERS
PILOC: SKIPA TT2,[IFIW @ISKADR(TT1)] ;$I TABLE
MASK: MOVE TT2,[IFIW @MSKADR(TT1)] ;$M TABLE
TXZN F,Q2F ;WAS A MASK NUMBER GIVEN?
TDZA TT1,TT1 ;NO, DEFAULT TO SEARCH MASK
SKIPL TT1,WRD2D ;YES, GET THE NUMBER - ERROR IF NEGATIVE
CAML TT1,-1(TT2) ;WITHIN LEGAL LIMITS?
JRST ERR ;NO, COMPLAIN AT USER
TXNE F,QF!FAF!SAF ;SETTING NEW VALUE, OR LOOKING AT OLD VALUE?
JRST MASK05 ;SET NEW USER-TYPED VALUE
MOVEI T,@TT2 ;LOOKING AT OLD VALUE, GENERATE MASK ADDRESS
MASK02: MOVEI W,1
MOVEM W,FRASE1
TXO F,DDLF ;NOTE DDT INTERNAL LOCATION
JRST QUAN1
;HERE TO SET NEW VALUE
MASK05: TXNN F,QF ;WAS A REAL ARGUMENT GIVEN?
MOVE T,@TT2 ;NO, FETCH THE PREVIOUS
TXNE F,FAF ;ANY BITS TO CLEAR?
TDZ T,LLIMIT ;YES, DO SO
TXNE F,SAF ;ANY BITS TO SET?
TDO T,ULIMIT ;YES, SET THEM
CAIN TT1,04 ;$4M?
JRST [SKIPG -2(TT2) ;MAYBE
JRST .+1 ;NOPE, WAS $4I, NOTHING SPECIAL
TLZ T,-1 ;YES, LET ".$4M" WORK
JUMPE T,MASK07 ;ZERO IS ALWAYS OK
CAIL T,20 ;WILL IT FIT INSIDE THE
CAILE T,1000000-BPBMAX;LOCALLY-ADDRESSABLE SECTION?
JRST [SMERS <BAD $4M VALUE> ;NO, SAY WHY NOT
JRST ERR] ;AND COMPLAIN
JRST MASK07] ;OK, SET BPT BLOCK ADDRESS
MASK07: MOVEM T,@TT2 ;SET NEW USER-TYPED VALUE
CAIN TT1,05 ;$5M?
JRST MASK5 ;MAYBE
JRST RET ;ALL DONE WITH $I/$M COMMAND
;HERE ON $5M
MASK5: SKIPG -2(TT2) ;$5I OR $5M COMMAND?
JRST RET ;$5I, ALL DONE
IFE FTFILE,<
SETZM SYMVAL ;$5M, FLAG TO RE-INIT SYMBOL TABLE PTRS
IFN FTSCSH,<PUSHJ P,CLRCSH> ;AND THE CACHE
JRST RET ;NOW WE'RE DONE
> ;END IFE FTFILE
IFN FTFILE,<
MASK5C: PUSHJ P,TCRLF ;MAKE MESSAGE LOOK NICE
PUSHJ P,WRTSYM ;TRY TO WRITE OUT CURRENT SYMBOLS
PUSHJ P,SYMFIX ;GRAB SOME NEW SYMBOLS
JRST [PUSHJ P,TCRLF ;FAILED, FIRST DO CRLF
SETZM SYMP+S$ADR ;WIPE OUT ALL POSSIBLE POINTERS
SETZM USYMP+S$ADR ; SO NOBODY TRIES TO USE THE
SETZM HSYMP+S$ADR ; BAD SYMBOL TABLE
JRST DD2] ;ALL DONE
JRST DD2 ;ALL DONE
> ;END IFN FTFILE
;$I MASK ADDRESS TABLE
EXP 0 ; 0 = $I COMMAND
EXP ISKMAX ; LENGTH OF $I TABLE
ISKADR: IFIW SAVPI+00 ;$00I EXEC-MODE CONI PI
IFIW SAVPI+01 ;$01I EXEC-MODE PI CHANNELS TURNED OFF
IFIW SAVAPR ;$02I EXEC-MODE CONI APR
IFIW PCFLG ;$03I PC FLAGS
IFIW PCWRD ;$04I PC ADDRESS
IFIW EPTWRD ;$05I EXEC PROCESS TABLE PAGE ADDRESS
IFIW UPTWRD ;$06I USER PROCESS TABLE PAGE ADDRESS
IFIW CSTWRD ;$07I CST BASE ADDRESS (VIRTUAL)
IFIW SPTWRD ;$10I SPT BASE ADDRESS (VIRTUAL)
ISKMAX==.-ISKADR ;MAX $I "FUNCTION"
;$M MASK ADDRESS TABLE
EXP 1 ; 1 = $M COMMAND
EXP MSKMAX ; LENGTH OF $M TABLE
MSKADR: IFIW MSK ;$00M SEARCH MASK
IFIW TTYMSK ;$01M TTY FORMAT CONTROL MASK
IFIW SYMOFS ;$02M SYMBOL + OFFSET RANGE "MASK"
IFIW BYTMSK ;$03M BYTE TYPEOUT MASK
IFIW BPBLK ;$04M INTER-SECTION BPT BLOCK LOCATION
IFIW SYTLOC ;$05M SYMBOL TABLE LOCATION INFO
IFIW PDFSEC ;$06M "PERMANENT" DEFAULT SECTION
MSKMAX==.-MSKADR ;MAX $M "FUNCTION"
;HERE ON AN $Z COMMAND -- STORE DATA INTO MEMORY
ZERO: TXNE F,CCF ;$Z OR $$Z (OLD FORM)?
JRST ERR ;$$Z - USER LOSES
TXNE F,FAF ;MUST HAVE EXPLICIT LOWER
TXNN F,SAF ;AND UPPER ADDRESS LIMITS
JRST ERR ;DON'T - SYNTAX ERROR
TXNN F,QF ;EXPLICIT QUANTITY TYPED IN?
SETZM WRD ;NO, DEFAULT TO 0 THEN
PUSHJ P,SETUP ;SETUP LOWER AND UPPER ADDRESS LIMITS
PUSHJ P,TCRLF ;NICE OUTPUT (IN CASE ^X ETC.)
PUSHJ P,PSHLLC ;SAVE PREVIOUS PC SEQUENCE
;LOOP DEPOSITING INTO EACH WORD BETWEEN LIMITS
ZERO2: MOVE T,WRD ;GET QUANTITY TO DEPOSIT
PUSHJ P,DEPMEM ;DEPOSIT INTO MEMORY
JRST ERR ;SOMETHING WENT WRONG - LOSE
AOS R,LLIMIT ;ADVANCE TO NEXT WORD
CAMLE R,ULIMIT ;AT END LIMIT YET?
JRST ZERO4 ;YES
TRNN R,PAGMSK ;START OF NEW PAGE?
ZERO3: PUSHJ P,LISCK ;YES, DO A LISTEN THEN
JRST ZERO2 ;KEEP GOING
JRST ZERO4 ;ABORT
MOVEI W1,[ASCIZ\Depositing: \] ;NICE TEXT
PUSHJ P,TSTRG ;TELL USER
MOVE T,R ;CURRENT LOCATION
PUSHJ P,LI1 ;TELL USER THAT TOO
PUSHJ P,TCRLF ;CAP OFF THE LINE
MOVE R,LLIMIT ;RESTORE R TO CURRENT LOCATION
JRST ZERO3 ;AND CHECK AGAIN
ZERO4: SUBI R,1 ;BACKUP R TO LAST WORD ADDRESS
MOVEM R,LLOC ;SET NEW "." TO LAST LOCATION ZAPPED
PUSHJ P,TCRLF ;END OF LOOP DEPOSITING MEMORY
JRST DD1 ;RETURN
;SETUP (DEFAULT) LOWER AND UPPER LIMITS FOR $W, $N, $E AND $Z
SETUP: TXNE F,FAF ;LOWER LIMIT GIVEN?
JRST [PUSHJ P,LLMSEC ;GET/SET DEFAULT SECTION (LLIMIT)
MOVE R,T ;COPY START TO LOOP INDEX
JRST SETUP1]
IFE FTFILE,<HLLZ R,LLOC> ;NO, USE 000000 IN LOCAL SECTION
IFN FTFILE,<SETZ R,> ;NO, USE START OF FILE
MOVEM R,LLIMIT ;SET LOWER LIMIT WORD
SETUP1: TXNE F,SAF ;UPPER LIMIT GIVEN?
JRST [PUSHJ P,ULMSEC ;GET/SET DEFAULT SECTION (ULIMIT)
JRST SETUP5]
IFE FTFILE,<HLLO T,LLOC> ;NO, USE 777777 IN LOCAL SECTION
IFN FTFILE,<
MOVE T,MAXSIZ ;NO, USE EOF
SUBI T,1 ;(MAXSIZ ONE TOO BIG FOR THIS CASE)
SKIPN FILING ;IF LOOKING AT MONITOR/MEMORY
JRST SETUP3 ;THIS IS UPPER LIMIT
SKIPN EXEFMT ;IF DATA FORMAT
JRST SETUP4 ;THEN UPPER LIMIT AT EOF
HLLO T,LLOC ;777777 IN CURRENT SECTION
SKIPE MAPFN ;PAGE MAPPING IN EFFECT?
JRST SETUP4 ;YES, UPPER LIMIT IN CURRENT SECTION
MOVE T,PGTLEN ;EXE FILE SANS MAPPING, MAX VIRT PAGE
LSH T,PG2WRD ;MAKE INTO WORD ADDRESS
SUBI T,1 ;LAST WORD OF LAST VIRTUAL PAGE
JRST SETUP4 ;BECOMES UPPER LIMIT
SETUP3: SKIPL MAPFN ;IF NOT PHYSICAL MEMORY
HLLO T,R ;THEN LIMIT TO SINGLE SECTION
> ;END OF IFN FTFILE
SETUP4: MOVEM T,ULIMIT ;SET UPPER LIMIT WORD
SETUP5: CAMLE R,T ;LIMITS IN A REASONABLE ORDER?
JRST ERR ;NO
POPJ P, ;YES, RETURN
;ROUTINES FOR GETTING/SETTING DEFAULT SECTION FROM/TO ULIMIT AND LLIMIT.
LLMSEC: MOVEI S,LLIMIT ;SETUP LLIMIT
CAIA ;SKIP INTO COMMON CODE
ULMSEC: MOVEI S,ULIMIT ;SETUP ULIMIT
PUSH P,F ;SAVE TRUE REGISTER "F"
PUSH P,ACCCF ;AND TRUE FLAG "ACCCF"
DMOVE TT1,LLREGF-LLIMIT(S) ;GET PRESERVED "F" AND "ACCCF"
MOVEM TT1,F ;SET PRESERVED STATE OF "F"
MOVEM TT2,ACCCF ; AND "ACCCF" FLAGS
MOVE T,LLIMIT-LLIMIT(S) ;FETCH ARGUMENT FOR CEFFAS
PUSHJ P,CEFFAX ;DEFAULT SECTION IF NEEDED
MOVEM T,LLIMIT-LLIMIT(S) ;COPY BACK IN CASE OF CHANGE
POP P,ACCCF ;RESTORE TRUE STATE OF "ACCCF"
POP P,F ;AND "F" FLAGS
POPJ P,
;************** END OF COMMAND PROCESSING ROUTINES ***************
SUBTTL FILE SPECIFICATION PARSING AND ERROR ROUTINES
IFN FTDEC10&<FTFILE!FTYANK>,<
;FSCAN -- ROUTINE TO INPUT (PARSE) ONE FILE SPEC
;CALL IS:
;
; MOVEI S,<SWTABLE>
; PUSHJ P,FSCAN
; ERROR RETURN (MESSAGE ALREADY TYPED)
; OK RETURN, FSBLK FILLED IN
;
;WHERE <SWTABLE> IS THE ADDRESS OF A 26 (DECIMAL) WORD TABLE OF
;INSTRUCTIONS TO BE EXECUTED WHEN A SWITCH IS SEEN - THE FIRST
;WHEN "/A", THE SECOND ON "/B", ETC.
;
;THE AREA FSBLK HAS THE INPUT INFORMATION AS FOLLOWS:
;
; FSBLK: ;.NE. 0 IF NOT A BLANK LINE
; FS$SWT ;AT LEAST ONE SWITCH SPECIFIED
; FS$DEV ;DEVICE WAS SPECIFIED
; FS$NAM ;FILENAME WAS SPECIFIED
; FS$EXT ;EXTENSION WAS SPECIFIED
; FS$PTH ;PATH WAS SPECIFIED
; FSDEV: ;THE DEVICE SPECIFIED
; FSFIL: ;THE FILENAME SPECIFIED
; FSEXT: ;THE EXTENSION (RH .NE. 0 IF ANYTHING TYPED)
; FSPPN: ;THE PPN SPECIFIED
; FSSFD: ;THE SFD'S (UP TO 5)
;
;NOTE THAT THE BITS IN FSBLK ARE ARRANGED SUCH THAT FS$SWT IS THE
;SIGN BIT SO THAT A SKIPN WILL TEST IF ANYTHING WAS TYPED, A SKIPG
;IF ONLY A FILE SPEC TYPED, A SKIPL IF ANY SWITCHES TYPED.
;
;IF EXTENSION "UFD" WAS SPECIFIED THEN THE DIRECTORY SPECIFIED
;IS USED AS THE FILENAME AND [1,1] IS RETURNED AS THE DIRECTORY.
;
;AC "T" CONTAINS CHARACTER WHICH TERMINATED FILE SCAN.
;
;USES ACS T, TT, TT1, TT2
;STILL FTDEC10
FSCAN: SETZM FSBLK ;CLEAR START OF FILESPEC AREA
MOVE T,[FSBLK,,FSBLK+1] ;BLT POINTER TO
BLT T,FSBLK+FSLEN-1 ;CLEAR ALL OF FILE SPEC AREA
GETPPN T, ;READ IN DEFAULT PPN
JFCL ;(BLOODY JACCT BIT)
MOVEM T,MYPPN ;SAVE FOR PATH DEFAULTING
;TOP LEVEL PARSE LOOP TO READ FILE SPEC
FSCSPC: PUSHJ P,FSCSIX ;READ A SOMETHING OR OTHER
FSCSP1: CAIN T,":" ;DEVICE SPECIFIED?
JRST FSCDEV ;YES - GO STORE
JUMPE TT,FSCSP2 ;IF NO NAME, SKIP NAME SAVE
;IF GOT HERE, MUST BE FILENAME IN TT
SKIPE FSFIL ;FILENAME ALREADY SPECIFIED?
JRST FSEDFI ;YES - ERROR
MOVEM TT,FSFIL ;SAVE FILENAME AWAY
MOVX TT,FS$NAM ;FILENAME SEEN
IORM TT,FSBLK ;REMEMBER FOR OTHERS
FSCSP2: CAIN T,"." ;EXTENSION COMING UP?
JRST FSCEXT ;YES - READ IT IN
CAIE T,"<" ;EITHER KIND OF
CAIN T,"[" ;PATH COMING UP?
JRST FSCPTH ;YES - READ IT IN
CAIN T,"/" ;SWITCH COMING UP?
JRST FSCSWT ;YES - GO SEE WHAT'S UP
CAIE T,.CHTAB ;RANDOM <TAB>?
CAIN T," " ;RANDOM SPACE?
JRST FSCSPC ;YES - JUST EAT IT, KEEP LOOKING
HLRZ TT1,FSEXT ;GET EXTENSION (IF ANY)
CAIE TT1,'UFD' ;USER FILE DIRECTORY?
JRST CPOPJ1 ;NO, ALL DONE
MOVE TT1,FSPPN ;YES, THEN THE DIRECTORY
MOVEM TT1,FSFIL ;IS REALLY THE FILE NAME
MOVE TT1,[1,,1] ;AND [1,1]
MOVEM TT1,FSPPN ;IS REALLY THE DIRECTORY
SETZM FSSFD ;DISALLOW ANY SFD'S
MOVX TT1,FS$NAM ;NOTE WE HAVE SEEN THE FILENAME
IORM TT1,FSBLK ;ALBEIT IN A STRANGE PLACE
JRST CPOPJ1 ;OK RETURN
;(MATCH ANGLE BRACKETS: >)
;STILL FTDEC10
;HERE TO SET DEVICE NAME
FSCDEV: JUMPE TT,FSENDI ;NULL DEVICE ILLEGAL
SKIPE FSDEV ;DEVICE ALREADY SEPCIFIED?
JRST FSEDDI ;YES - ERROR
MOVEM TT,FSDEV ;SET NEW DEVICE NAME
MOVX TT,FS$DEV ;DEVICE SEEN
IORM TT,FSBLK ;REMEMBER FOR OTHERS
JRST FSCSPC ;CONTINUE PARSING
;HERE TO HANDLE EXTENSION COMING UP
FSCEXT: SKIPE FSEXT ;ALREADY SEEN EXTENSION?
JRST FSEDEI ;YES - ERROR
PUSHJ P,FSCSIX ;READ IN EXTENSION
HLLOM TT,FSEXT ;SET NEW EXTENSION
MOVX TT,FS$EXT ;EXTENSION SEEN
IORM TT,FSBLK ;REMEMBER FOR OTHERS TO SEE
SETZ TT, ;DON'T CONFUSE ANYBODY ELSE
JRST FSCSP1 ;SEE WHAT ELSE TO DO
;HERE TO READ IN A DIRECTORY PATH SPECIFICATION
;(MATCH ANGLE BRACKETS: <)
FSCPTH: SKIPE FSPPN ;PATH ALREADY BEEN SPECIFIED?
JRST FSEDPI ;YES - ERROR
PUSHJ P,FSCOCP ;READ IN OCTAL PROJECT NUMBER
JRST FSEIPP ;ILLEGAL PROJECT/PROGRAMMER NUMBER
SKIPN TT ;EXPLICIT PROJECT NUMBER?
HLR TT,MYPPN ;NO - USE IMPLICIT LOGGED IN
HRLM TT,FSPPN ;SET UP
CAIE T,"," ;MUST BE COMMA HERE
JRST FSEIPP ;NO COMMA - ERROR
PUSHJ P,FSCOCH ;READ IN OCTAL PROGRAMMER
JRST FSEIPP ;ILLEGAL PROJECT/PROGRAMMER NUMBER
SKIPN TT ;EXPLICIT PROGRAMMER?
HRR TT,MYPPN ;NO - USE IMPLICIT LOGGED IN ONE
HRRM TT,FSPPN ;SET UP
MOVE TT2,[-6,,FSSFD] ;AOBJN POINTER FOR SFD'S
FSCPT5: CAIE T,"," ;MORE TO DO?
JRST FSCPT8 ;NO - END OF PATH
AOBJP TT2,FSETMS ;MAKE SURE HAVE ROOM
PUSHJ P,FSCSIX ;YES - READ IN NEXT SFD
JUMPE TT,FSENSI ;NULL SFD ILLEGAL
MOVEM TT,-1(TT2) ;REMEMBER AWAY IN PATH BLOCK
JRST FSCPT5 ;LOOP FOR NEXT SFD
FSCPT8: MOVX TT,FS$PTH ;PATH SEEN
IORM TT,FSBLK ;REMEMBER FOR OTHERS
JUMPE T,CPOPJ1 ;EOL IS VALID END OF PATH CHAR
CAIE T,"]" ;"]" IS ONLY OTHER VALID TERMINATOR
CAIN T,">" ;EXCEPT FOR ANGLE
JRST FSCSPC ;CONTINUE PARSING
JRST FSEIPP ;FUNNY CHARACTER - CALL ERROR
;STILL FTDEC10
;HERE TO HANDLE (IN AN ELEMENTARY FASHION) SWITCHES
;SWITCHES WILL BE IDENTIFIED BY THEIR FIRST CHARACTER ONLY,
;ALTHOUGH THE ENTIRE "WORD" WILL BE READ IN ON G.P.'S
;
;ADDRESS IN S IS 26 (DECIMAL) ENTRIES FOR THE 26 POSSIBLE
;SWITCHES. EACH SWITCH ENTRY WILL BE AN INSTRUCTION TO BE
;XCT'ED BY THE SWITCH PROCESSOR. IF A "COMPLICATED" ROUTINE
;IS NEEDED TO HANDLE THE SWITCH THEN THE SWITCH ENTRY IN
;SWTBL SHOULD BE A PUSHJ TO THE ROUTINE TO HANDLE THAT PAR-
;TICULAR SWITCH, WHICH ROUTINE SHOULD RETURN CPOPJ0.
;
;UNUSED SWITCH ENTRIES SHOULD BE "JRST FSEILS"
FSCSWT: PUSHJ P,FSCSIX ;READ IN A SWITCH NAME
JUMPE TT,FSENWI ;NULL SWITCH ILLEGAL
LSH TT,-^D30 ;REDUCE TO SINGLE CHARACTER
JUMPE S,FSEILS ;IF NO SWITCHES THEN ALWAYS ERROR
CAIL TT,'A' ;IN RANGE
CAILE TT,'Z' ;I.E., ALPHA?
JRST FSEILS ;NO - ERROR
MOVEI TT1,-'A'(TT) ;GET SWITCH OFFSET (A = 0, ETC.)
ADDI TT1,(S) ;POINT INTO SWITCH TABLE PASSED US
XCT (TT1) ;DO SWITCH-SPECIFIC PROCESSING
MOVX TT,FS$SWT ;SWITCH SEEN
IORM TT,FSBLK ;REMEMBER FOR OTHERS
SETZ TT, ;DON'T CONFUSE THE ISSUE
JRST FSCSP1 ;CONTINUE PARSE
;STILL FTDEC10
;FSCSIX -- READ IN A SIXBIT WORD
;CALL IS:
;
; PUSHJ P,FSCSIX
; RETURN
;
;RETURNS SIXBIT WORD (LEFT JUSTIFIED) IN AC "TT" AND TERMINATING
;CHARACTER IN AC "T". ANY CHARACTERS AFTER THE FIRST SIX WILL BE
;IGNORED - I.E., TOSSED OUT.
;
;USES T, TT, TT1
FSCSIX: MOVE TT1,[POINT 6,TT] ;LOAD BYTE POINTER
SETZ TT, ;WHAT WE'VE SEEN SO FAR
FSCSI0: PUSHJ P,FSCTIN ;NEXT CHARACTER
POPJ P, ;END OF SCAN
CAIL T,"0" ;POSSIBLE VALID ALPHANUMERIC?
CAILE T,"Z" ; . . .
POPJ P, ;NO - END OF SCAN
CAILE T,"9" ;TO BE MORE PRECISE -
CAIL T,"A" ;IS IT A VALID ALPHANUMERIC?
CAIA ;YES
POPJ P, ;NO - END OF SCAN
SUBI T,40 ;MAKE INTO SIXBIT CHARACTER
TXNE TT1,77B5 ;ROOM LEFT IN TT?
IDPB T,TT1 ;YES - SO STUFF IN LATEST CHAR
JRST FSCSI0 ;LOOP BACK
;STILL FTDEC10
;FSCOCT -- READ IN OCTAL NUMBER
;FSCOCH -- READ IN OCTAL HALFWORD
;FSCOCP -- READ IN OCTAL 17-BIT WORD (PROJECT NUMBER)
;CALL IS:
;
; PUSHJ P,FSCOC-
; ERROR RETURN
; NORMAL RETURN
;
;THE ERROR RETURN IS TAKEN IF THE NUMBER READ IS TOO LARGE
;FOR A PPN, OTHERWISE THE NORMAL RETURN WILL BE TAKEN AND
;THE OCTAL INTEGER WILL BE RETURNED IN AC "TT" WITH THE TERMI-
;NATING CHARACTER IN AC "T".
;
;USES T, TT
FSCOCP: PUSHJ P,FSCOCT ;GET OCTAL VALUE
TDNE TT,[777777400000] ;MORE THAN 17 BITS?
POPJ P, ;YEP - TAKE ERROR RETURN
JRST CPOPJ1 ;NOPE, GIVE GOOD RETURN
FSCOCH: PUSHJ P,FSCOCT ;GET OCTAL VALUE
TLNE TT,-1 ;MORE THAN 18 BITS?
POPJ P, ;YEP - CALL ERROR
JRST CPOPJ1 ;NOPE - GIVE GOOD RETURN
FSCOCT: SETZ TT, ;INITIALIZE
FSCOC0: PUSHJ P,FSCTIN ;NEXT CHARACTER
POPJ P, ;C'EST TOUT
CAIL T,"0" ;SEE IF VALID OCTAL
CAILE T,"7" ; . . .
POPJ P, ;NOPE - END OF SCAN
TXNN TT,7B2 ;ROOM LEFT IN TT?
LSH TT,3 ;YES - SHIFT UP ONE OCTADE
IORI TT,-"0"(T) ;AND ADD IN THIS ONE
JRST FSCOC0 ;MORE, MORE, MORE!
;STILL FTDEC10
;FSCTIN -- READ IN ONE COMMAND CHARACTER
;CALL IS:
;
; PUSHJ P,FSCTIN
; EOL RETURN
; NORMAL RETURN
;
;IF CHARACTER READ IS LINE-FEED OR ESCAPE (I.E., END OF LINE)
;THEN RETURN IS CPOPJ0 WITH AC "T" CONTAINING 0.
;
;NORMAL RETURN IS CPOPJ1 WITH AC "T" CONTAINING THE NEXT SEVEN-BIT
;ASCII COMMAND CHARACTER, LOWER CASE SHIFTED TO UPPER CASE AND
;TABS CONVERTED TO SPACES.
FSCTIN: INCHWL T ;NEXT COMMAND CHARACTER
CAIE T,.CHDEL ;<DEL>
CAIN T,.CHCRT ;OR <CR>?
JRST FSCTIN ;YES, JUST EAT IT
CAIN T,.CHTAB ;<TAB>?
MOVEI T," " ;YES, CONVERT TO SPACE
CAIE T,.CHLFD ;<LF>
CAIN T,.CHESC ;OR <ESC>?
SETZ T, ;YES, BREAK CHAR, RETURN 0
JUMPE T,CPOPJ ;IF A BREAK JUST RETURN NOW
CAIL T,"A"+40 ;LOWER CASE
CAILE T,"Z"+40 ; . . .
CAIA ;NO
SUBI T,40 ;YES, SHIFT TO UPPER CASE
CAIE T,.CHCNC ;<ETX>
CAIN T,.CHCNZ ;OR <SUB>?
JRST FSCTIZ ;YES, EXIT
JRST CPOPJ1 ;NO, RETURN VALID CHARACTER IN T
FSCTIZ: EXIT 1, ;RETURN TO MONITOR
POPJ P,
;STILL FTDEC10
;ERROR ROUTINES FOR FSCAN AND FRIENDS
FSEDDI: TMSG <? Duplicate device illegal>
JRST FSEERR
FSEDEI: TMSG <? Duplicate extension illegal>
JRST FSEERR
FSEDFI: TMSG <? Duplicate filename illegal>
JRST FSEERR
FSEDPI: TMSG <? Duplicate path illegal>
JRST FSEERR
FSEFFF: TMSG <? FILOP. failure (>
PUSHJ P,TOC ;ISSUE ERROR CODE
TMSG <) for input file>
JRST FSEERR
FSEILS: TMSG <? Illegal switch ">
ADDI TT,"A"-'A' ;MAKE INTO 7-BIT ASCII
OUTCHR TT ;AND LIST THE SWITCH
TMSG <" specified>
JRST FSEERR
FSEIPP: TMSG <? Illegal path specification>
JRST FSEERR
FSENDI: TMSG <? Null device illegal>
JRST FSEERR
FSENFI: TMSG <? Null filename illegal>
JRST FSEERR
FSENSI: TMSG <? Null SFD illegal>
JRST FSEERR
FSENWI: TMSG <? Null switch illegal>
JRST FSEERR
FSETMS: TMSG <? Too many SFD's>
JRST FSEERR
;COMMON ERROR EXIT
FSEERR: TMSG <
>
POPJ P,
;STILL FTDEC10
;FSFSET -- BUILD A FILOP. BLOCK GIVEN SCAN DATA
;CALL IS:
;
; MOVX T,<BLKPTR>
; PUSHJ P,FSFSET
; ERROR
; RETURN
;
;WHERE <BLKPTR> IS A POINTER TO A 3 WORD TABLE CONTAINING:
; BLKPTR + 0/ LENGTH,,ADDRESS OF FILOP. BLOCK
; + 1/ LENGHT,,ADDRESS OF LOOKUP BLOCK
; + 2/ LENGTH,,ADDRESS OF PATH BLOCK
; + 3/ LENGTH,,ADDRESS OF RETURNED FILSPEC BLOCK
;
;THE ERROR RETURN IS TAKEN IF ANY OF THE BLOCKS ARE TOO SHORT
;
;RETURNS WITH FILOP. BLOCK SETUP, POINTING TO OTHER BLOCKS, ALL
;BLOCKS ZEROED EXCEPT FOR DEVICE, FILENAME, FILETYPE, AND FILEPATH
;WORDS.
FSFSET: MOVE TT,0(T) ;LENGTH,,ADDRESS OF FILOP. BLOCK
PUSHJ P,FSFCLR ;CLEAR BLOCK
CAIG TT1,.FOFSP ;IS FILOP. BLOCK LONG ENUF?
POPJ P, ;NO, ERROR
MOVE TT1,2(T) ;POINTER TO PATH BLOCK
MOVEM TT1,.FOPAT(TT) ;SET IN FILOP. BLOCK
MOVE TT1,FSDEV ;GET DEVICE
MOVEM TT1,.FODEV(TT) ;SET IN DEVICE WORD
MOVE TT1,1(T) ;POINTER TO LOOKUP BLOCK
HRRM TT1,.FOLEB(TT) ;SET IN FILOP. BLOCK
MOVE TT,1(T) ;POINTER TO LOOKUP BLOCK AGAIN
PUSHJ P,FSFCLR ;CLEAR IT OUT
SOJ TT1, ;COUNT WORD DOESN'T COUNT
CAIGE TT1,.RBEXT ;IS LOOKUP BLOCK LONG ENOUGH?
POPJ P, ;NO, ERROR
MOVEM TT1,.RBCNT(TT) ;SET LOOKUP BLOCK LENGTH
MOVE TT1,FSFIL ;FILE NAME
MOVEM TT1,.RBNAM(TT) ;SET IN LOOKUP BLOCK
HLLZ TT1,FSEXT ;FILE TYPE
MOVEM TT1,.RBEXT(TT) ;SET IN LOOKUP BLOCK
MOVE TT1,FSBLK ;THE SCANNER BITS
TXNN TT1,FS$PTH ;WAS A DIRECTORY PATH SPECIFIED?
JRST FSFSE1 ;NO
MOVE TT1,2(T) ;YES - ADDRESS OF PATH BLOCK
HRRZM TT1,.RBPPN(TT) ;SET IN LOOKUP BLOCK
MOVE TT,2(T) ;PATH POINTER
PUSHJ P,FSFCLR ;CLEAR IT OUT
CAIGE TT1,.PTPPN+5+1 ;IS IT LONG ENUF FOR A REAL PATH?
POPJ P, ;NO, ERROR
MOVSI TT1,FSPPN ;START OF SCANNED PATH
HRRI TT1,.PTPPN(TT) ;START OF PATH BLOCK PATH INFO
BLT TT1,.PTPPN+5+1(TT) ;SETUP PATH BLOCK
FSFSE1: HRRZ TT1,0(T) ;GET FILOP BLOCK AGAIN
MOVE TT,3(T) ;RETURNED FILESPEC POINTER
MOVEM TT,.FOFSP(TT1) ;SAVE
PUSHJ P,FSFCLR ;CLEAR IT OUT
JRST CPOPJ1 ;RETURN WITH FILOP. BLOCK SETUP
;STILL FTDEC10
;FSFCLR -- ROUTINE TO CLEAR A BLOCK
;CALL IS:
;
; MOVX TT,<LENGTH,,ADDRESS>
; PUSHJ P,FSFCLR
; RETURN
;
;RETURNS ADDRESS IN TT AND LENGTH IN TT1, USES TT2
FSFCLR: HRRZ TT1,TT ;START ADDRESS
SETZM (TT1) ;CLEAR FIRST WORD
ADDI TT1,1 ;RH OF BLT POINTER
HRL TT1,TT ;LH OF BLT POINTER
HLRZ TT2,TT ;LENGTH TO ZERO
ADDI TT2,(TT) ;LAST WORD TO BE ZEROED
BLT TT1,-1(TT2) ;ZERO BLOCK
HLRZ TT1,TT ;RETURN LENGTH IN TT1
ANDI TT,-1 ;AND ADDRESS IN TT
POPJ P, ;DONE
> ;END OF IFN FTDEC10&<FTFILE!FTYANK>
SUBTTL ENTER AND LEAVE DDT -- SAVE
IFE FTFILE,<
;SAVE -- SUBROUTINE TO SAVE USER CONTEXT ON ENTRY TO DDT
;CALL:
; JSR SAVE
; NORMAL RETURN
; HERE IF CONTEXT ALREADY SAVED
;
;SAVES USER CONTEXT IF NOT ALREADY SAVED AWAY (AS FLAGGED BY SARS).
;ALWAYS SETS UP DDT CONTEXT SO DDT WILL BE IN A KNOWN STATE.
;FIRST, SAVE AND SETUP "ALWAYS" STUFF. ALSO SHUT OFF PI IN EXEC MODE
;NOW SO WE CAN SET UP STUFF LIKE ACS THAT MIGHT BE USED AT INTERRUPT LEVEL.
SAVEG: MOVEM T,SWTEM ;SAVE AC FOR MOMENT
XMOVEI T,-1 ;GET SECTION NUMBER FOR OUR PC
HLLZM T,SECDDT ;AND SAVE IT FOR OTHERS
HLLZ T,SAVE ;GET SECTION 0 PC FLAGS
SKPS0 ;IN NON-ZERO SECTION?
XSFM T ;YES, ASK CPU FOR PC FLAGS
MOVEM T,XSAVE ;SAVE PC FLAGS FOR LATER XJRSTF
ROT T,^L<PC$USR> ;ROTATE USER MODE BIT TO SIGN
MOVEM T,USRFLG ; AND SAVE IT
MOVE T,XSAVE ;RETRIEVE CURRENT PC FLAGS
XOR T,PCFLG ;CHECK USER FLAG AGAINST LAST SAVE
TXNE T,PC$USR ;SAME?
SETZM SARS ;NO, SAVE ACS AND PC FOR EXIT
; SO EXEC/USER MODE FLOP RESTORED AS ENTERED
IFN FTEXEC,<
SKPEXC ;IN EXEC MODE?
JRST SAVE1 ;NO, SKIP THIS
SKIPN SARS ;WANT TO SAVE OLD PI STATUS?
CONI PI,SAVPI ;YES, SAVE FOR EXIT
CONO PI,@SAVPI+1 ;SET UP PI SYSTEM FOR DDT
SAVE1:
> ;END OF IFN FTEXEC
MOVE T,SWTEM ;RESTORE THE AC
;CONTINUED ON NEXT PAGE
;STILL IFE FTFILE
;CONTINUED FROM PREVIOUS PAGE
;NOW SAVE USER MODE ONLY ITEMS.
IFN FTDEC20&<^-FTMON>,< ;SAVE PSI STATE ON -20 EXCEPT MDDT
IFN FTEXEC,<
SKPEXC> ;DON'T DO THIS IF IN EXEC MOE
SKIPE SARS ;ALREADY SAVED?
JRST SAVE4 ;YES, DON'T SAVE AGAIN
SETOM SAVSTS ;ASSUME PSI SYSTEM IS ON
MOVEM T1,SWTEM ;SAVE T1 FOR A MOMENT
MOVEI T1,.FHSLF ;BUT CHECK
SKPIR% ;IS IT?
SETZM SAVSTS ;NO, REMEMBER THAT IT'S OFF
DIR% ;TURN IT OFF EITHER WAY
MOVE T1,SWTEM ;RESTORE T1
> ;END IFN FTDEC20&<^-FTMON>
;NOW SAVE NON-EXEC MODE THINGS THAT SHOULD ONLY BE SAVED IF SARS=0,
;THEN SET UP ALL NON-EXEC MODE THINGS THAT DDT WANTS SET UP.
SAVE4: AOS SAVE ;ASSUME SKIP RETURN (ALREADY SAVED)
SKIPE SARS ;ALREADY SAVED?
JRST SAVE2 ;YES, DON'T SAVE THESE AGAIN
SOS SAVE ;ASSUMPTION NOT VALID, UN-DO SKIP RETURN
MOVEM 17,AC17 ;SAVE ACS
HRRZI 17,AC0
BLT 17,AC0+16
SETOM FAKEAC ;NOTE LOCATIONS 0 - 17 SAVED AWAY
MOVE T,XSAVE ;GET FRESH PC FLAGS
MOVEM T,PCFLG ;AND SAVE THEM FOR OTHERS
SAVE2: INIPDL ;LOAD UP A FRESH STACK POINTER
SKIPE SAVP ;IF WE HAD ONE BEFORE, THOUGH...
MOVE P,SAVP ; GET IT BACK
MOVE F,SAVF ;GET FLAGS BACK, OR ZERO IF NONE YET
MOVE T,[SCHM,,SCH] ;DDT TYPEOUT MODES
BLT T,ODF ;SET THEM UP
SETZM MAPFN ;NO MAPPING ($U) IN EFFECT
;CONTINUED ON NEXT PAGE
;STILL IFE FTFILE
;CONTINUED FROM PREVIOUS PAGE
;NOW SET INITIAL DEFAULT SECTION.
IFN FTDEC10,<
IFN FTEXEC,<SKPEXC> ;NO ENTRY VECTOR IN EXEC MODE
PUSHJ P,GEVECS ;GET ENTRY VECTOR SECTION
SETZ T, ;CAN'T, USE ZERO
> ;END IFN FTDEC10
IFN FTDEC20,<
IFN FTUD20,< ;ONLY USER-20 HAS AN ENTRY VECTOR
SKIPL T,SECUDD ;IS THERE A STUB?
JRST SAVE2A ;YES, SKIP E.V. SECTION STUFF
PUSHJ P,GEVECS ;NO, GET ENTRY VECTOR SECTION IN T
SETZ T, ;TRY SECTION 0
> ;END IFN FTUD20
IFE FTUD20!FTMON,<MOVE T,SECDDT> ;OTHERWISE DEFAULT TO DDT'S SECTION
IFN FTMON,<MOVSI T,MSEC1> ;MDDT DEFAULTS TO NORMAL MONITOR CODE
> ;END IFN FTDEC20
SAVE2A: SKIPN BPTIP ;ARE WE $X'ING?
MOVEM T,LLOCS ;NO, ENTERING FOR REAL
;STILL IFE FTFILE
;CONTINUED FROM PREVIOUS PAGE
;NOW SAVE ALWAYS-SAVE EXEC MODE STATUS. THIS INCLUDES CPU TYPE,
;PAGING TYPE, ETC.
MOVE T,[BZ$FLG,,BZ$FLG+1] ;ZERO FLAGS
SETZM BZ$FLG ; . . .
BLT T,ZZ$FLG-1 ; . . .
IFE FTDEC20,< ;DON'T CHECK FOR KA/KI ON TOPS-20
MOVNI T,1 ;LOAD T WITH ALL ONES
AOBJN T,.+1 ;ADD ONE TO BOTH HALVES
JUMPE T,SAV4I ;IF T=0 THEN PROCESSOR AFTER KA-10
SETOM KAFLG ;RH CARRIED INTO LH, MUST BE KA-10
JRST SAVE6 ;CONTINUE
SAV4I: BLT T,0 ;SEE WHAT PROCESSOR DOES WITH BLT
JUMPN T,SAV4L ;KL-10 WILL LEAVE BEHIND 1,,1
SETOM KIFLG ;T=0 IF KI-10
IFN FTEXEC,< ;ONLY SET PAGING IN EXEC MODE
SKPUSR ;USER OR EXEC MODE?
SETOM KIPAG ;KI-10'S ALWAYS DO KI-PAGING
> ;END IFN FTEXEC
JRST SAVE6 ;CONTINUE
> ;END IFE FTDEC20
SAV4L: MOVEI 2,-1 ;A LARGER-THAN-ONE-DIGIT VALUE
SETZB 3,5 ;CLEAR STRING BYTE PTR.
MOVEI 4,1 ;SET DOUBLE LENGTH BINARY RESULT
EXTEND 1,[CVTBDO] ;CONVERT BINARY TO DECIMAL
TLNN 4,200000 ;KL10 MICROCODE SETS THIS BIT
JRST SAV4S ;NOT A KL, TRY NEXT CPU
SETOM KLFLG ;KL, SET FLAG
SAVKS: SETOM KLSFLG ;KL/KS FLAG TOO
IFN FTEXEC,< ;SELECT KI/KL PAGING IF EXEC MODE
SKPEXC ;USER OR EXEC MODE?
JRST SAVE6 ;USER, NO PAGING THEN
CONI PAG,T ;GET PAGING BITS
TXNN T,PGKLMD ;KL-PAGING?
SETOM KIPAG ;NO, KI-PAGING ENABLED
TXNE T,PGKLMD ;KL-PAGING?
SETOM KLPAG ;YES, KL-PAGING ENABLED
> ;END IFN FTEXEC
JRST SAVE6 ;CONTINUE
SAV4S: MOVE TT1,PCFLG ;GET PC FLAGS
TXO TT1,PC$BIS ;TURN ON FIRST-PART-DONE
XMOVEI TT2,SAV4SB ;GET PC FOR XJRSTF
HLLZ TT,TT1 ;GET FLAGS FOR JRSTF
HRRI TT,SAV4SB ;SET PC FOR JRSTF
SKPS0 ;IN SECTION ZERO?
XJRSTF TT1 ;NO, CONTINUE WITH XJRSTF
JRSTF @TT ;YES, CONTINUE WITH JRSTF
SAV4SB: MOVSI TT,(POINT 7,) ;LOAD BYTE PTR.
SETOM KSFLG ;ASSUME IT'S A KS-10
ILDB TT1,TT ;INCREMENT PTR.
JUMPLE TT,SAVKS ;IT'S A KS, JUMP
SETZM KSFLG ;NOT A KS, CLEAR FLAG
BADCPU: HALT . ;UNKNOWN PROCESSOR TYPE
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;NOW SAVE THE THINGS THAT SHOULD ONLY BE SAVED IN EXEC MODE IF SARS=0,
;LIKE APR STATUS.
SAVE6:
IFN FTEXEC!FTDEC10,<
SKPUSR ;DON'T SAVE APR STATUS IN USER MODE
SKIPE SARS ;ALREADY SAVED?
JRST SAVE7 ;YES, SKIP THIS
CONI APR,T ;GET APR STATUS
IFN FTDEC10,<
SKPNKA ;ON A KA-10?
TXNN T,1B23 ;YES, NXM SET?
CAIA ;NO OR NO
TXO T,1B0 ;KA AND NXM SET, MOVE TO 1B0
> ;END IFN FTDEC10
MOVEM T,SAVAPR ;SAVE APR STATUS FOR LATER
> ;END OF IFN FTEXEC!FTDEC10
;NOW SEE IF EXTENDED ADDRESSING EXISTS
SAVE7:
IFN FTDEC10,< ;ONLY FOR TOPS-10
MOVSI TT,-1 ;INVALID ADDRESS MASK FROM SECTION ZERO
IFN FTEXEC,<
SKPUSR ;IN USER MODE?
JRST SAVE7E ;NO, USE DIFFERENT CHECK
> ;END IFN FTEXEC
MOVX T,%CNST2 ;GETTAB FOR APRID-LIKE FUNCTION
GETTAB T, ;ASK THE MONITOR FOR SOME BITS
SETZ T, ;ASSUME FALSE IF OLD MONITOR
TXNE T,ST%EXA ;EXTENDED ADDRESSING SUPPORTED?
MOVX TT,^-VMADR ;YES, REALLY CAN SEE ANYWHERE FROM 0
IFN FTEXEC,<
JRST SAVE7X ;ALL DONE IF USER MODE
SAVE7E: SKPNKL ;ONLY AVAILABLE ON A KL
SKPKLP ;WITH KL-PAGING
JRST SAVE7X ;GIVE UP
APRID T ;GET PROCESSOR OPTIONS
TXNE T,1B1 ;EXTENDED ADDRESSING ON?
MOVX TT,^-VMADR ;YES, CAN SEE EVERYWHERE
> ;END IFN FTEXEC
SAVE7X: MOVEM TT,S0PLIM ;SAVE S0 VISIBILITY LIMIT
> ;END IFN FTDEC10
;CONTINUED ON NEXT PAGE
;STILL IFE FTFILE
;CONTINUED FROM PREVIOUS PAGE
;NOW CALL TTYSAV TO SAVE ALL TTY-RELATED STUFF.
SAVE8: PUSHJ P,TTYSAV ;DO TTY-DEPENDENT STUFF FOR RETURN TO DDT
SETOM SARS ;STATUS SUCCESSFULLY SAVED
JRST @SAVE ;ALL DONE
SUBTTL ENTER AND LEAVE DDT -- RESTOR
;STILL IFE FTFILE
;RESTOR -- ROUTINE TO RESTORE USER STATUS BEFORE RETURNING TO THE USER
;CALL:
; JSP T,RESTOR
; RETURN
;
;HERE WHEN ALL USER STATES RESTORED.
RESTOR: TDZA TT,TT ;NORMAL ENTRY
RESTRX: SETO TT, ;FLAG USE XJRSTF REGARDLESS
MOVEM TT,RSTM1 ;SAVE FLAG
MOVEM T,SAVE
MOVEM P,SAVP ;SAVE P
MOVEM F,SAVF ;AND F
PUSHJ P,TTYRES ;RESTORE STATUS OF CONSOL TTY (EXEC MODE)
MOVE T,PCFLG ;SAVED PC FLAGS
TXZ T,PC$USR ;DON'T TRY TO RESTORE USER MODE FLAG
MOVEM T,XSAVE ;SET PC FLAGS FOR POSSIBLE XJRSTF
SKPNS0 ;IN NON-ZERO SECTION?
SKIPE RSTM1 ;OR NEED XJRSTF REGARDLESS?
CAIA ;YES, DON'T WIPE OUT SAVE
HLLM T,SAVE ;NO, SET ZERO SECTION PC FLAGS
IFN FTEXEC,<
SKPEXC
JRST RESTR2
MOVE T,SAVPI ;GET SAVED PI SYSTEM ENABLE BITS
AND T,SAVPI+1
IORI T,2000 ;TURN ON CHANNELS
TRZ T,1000 ;MAKE SURE WE DON'T ASK FOR BOTH
HRRZM T,SAVPI
SKPKL ;ON A KL?
JRST RESTR2 ;NO, SKIP AHEAD
HRRZ T,SAVAPR ;YES, GET APR CONDITIONS
TXC T,1B22!1B24!1B25!1B27 ;COMPLEMENT MEM PARITY ERROR BITS
ANDI T,1B22!1B24!1B25!1B27+7 ;CLEAR ALL BITS THAT SHOULD BE
CONO APR,(T) ;DO IT
RESTR2:
> ;END FTEXEC
;FALL INTO NEXT PAGE
;STILL IFE FTFILE
;FALL IN FROM ABOVE
;CHECK PSI STATUS TO RESTORE. MAY HAVE TO DO IT IN SECTION 0, IN WHICH
;CASE WE USE PART OF THE BREAKPOINT BLOCK.
IFN FTDEC20&<^-FTMON>,< ;TOPS-20 EXCEPT MDDT
IFN FTEXEC,< ; AND MAYBE EXEC DDT
SKPEXC> ;IN USER MODE?
SKIPL SAVSTS ;WAS PSI ON?
JRST RESTR4 ;NO, WE'RE OK
MOVE T,SAVE ;GET OUR RETURN ADDRESS
SKPS0 ;IF WE'RE ALREADY IN ZERO,
TLNE T,-1 ;OR WE'RE RETURNING TO NON-ZERO,
JRST RESTR4 ;THERE'S NOTHING TO WORRY ABOUT.
HRRZ R,BPBLK ;SAFE PLACE TO DO THINGS
JUMPE R,RESTR4 ;NOT SET? NOTHING WE CAN DO...
ADDI R,BPBRST ;GET PAST THE BREAKPOINTS
MOVEI T,.FHSLF ;WHAT WE WANT T1 TO HAVE
EXCH T,AC0+1 ; WHEN WE DO THE EIR% CALL
PUSHJ P,DEPMEM ;DROP ORIGINAL WHERE SEC. 0 CAN FIND IT
JRST [ MOVEM T,AC0+1 ;CAN'T, RESTORE USER'S T1
JRST RESTR4] ;AND GIVE UP ON THE FANCY STUFF
HRRI R,1(R) ;STEP TO NEXT LOC
MOVX T,<EIR%> ;GET THE JSYS
PUSHJ P,DMEMER ;STUFF IT
HRRI R,1(R) ;NEXT
MOVX T,<MOVE T1,> ;WANT TO RESTORE T1
HRRI T,-2(R) ;FROM WHERE WE LEFT IT BEFORE
PUSHJ P,DMEMER ;DO IT
HRRI R,1(R) ;NEXT
MOVX T,<JRST> ;FINALLY A JUMP TO THE REAL PLACE
HRR T,SAVE ; WHERE WE WANT TO RETURN
PUSHJ P,DMEMER ;DROP IT IN
HRRI R,-2(R) ;BACK UP TO THE JSYS
MOVEM R,SAVE ;SAVE ADDRESS
SETZM SAVSTS ;DON'T RESTORE PSI PREMATURELY
RESTR4: ;CONTINUE WITH NORMAL RETURN
> ;END IFN FTDEC20&<^-FTMON>
HRLZI 17,AC0
BLT 17,17
SETZM SARS
IFN FTEXEC,<
SKPUSR ;IN USER MODE?
SKIPL SAVAPR ;EXEC, WANT NXM SET?
CAIA ;USER OR NO
MOVES 777777 ;WANT NXM SET, ASSUME KA-10
> ;END IFN FTEXEC
IF2,<IFL BPBRSL-4,<PRINTX ? BPBRSL TOO SMALL, MUST BE AT LEAST FOUR>>
;FALL INTO NEXT PAGE
;STILL IFE FTFILE
;FALL IN FROM ABOVE
;NOW TO RETURN TO THE CALLER, EITHER DDT OR THE USER PROGRAM ITSELF.
;IF IN EXEC MODE, WE TRY TO TURN THE PI ON AS LATE AS POSSIBLE, TO
;MAXIMIZE THE CHANCE THAT THE PC WILL GET OUT OF DDT BEFORE AN INTERRUPT
;OCCURS.
SKPNS0 ;WANT TO USE XJRSTF?
SKIPE RSTM1 ;NOT UNLESS ENTERED AT RESTRX
JRST REST06 ;NON-ZERO SECTION, NEED XJRSTF
IFN FTEXEC,< ;EXEC-MODE ONLY CODE
IFN FTDEC20,<
SKPEXC ;NEED JRSTF - EXEC MODE?
JRST REST05 ;NO, DO USER-MODE RETURN
> ;END IFN FTDEC20
IFE FTDEC20,<
SKPUSR>
CONO PI,@SAVPI ;YES, RESTORE PI
JRSTF @SAVE ;AND RETURN TO USER
> ;END IFN FTEXEC
IFN FTDEC20&<^-FTMON>,<
REST05: MOVEM T1,SWTEM ;SAVE T1 FOR A MOMENT
MOVEI T1,.FHSLF ;POINT TO OUR FORK
SKIPGE SAVSTS ;HAVE TO TURN PSI SYSTEM BACK ON?
EIR% ;YES, DO IT
MOVE T1,SWTEM ;NO, RESTORE T1 (MAY GET PSI TRAP FIRST)
> ;END IFN FTDEC20&<^-FTMON>
JRSTF @SAVE ;AND RETURN TO USER
REST06:
IFN FTEXEC,< ;EXEC-MODE ONLY CODE
IFN FTDEC20,<
SKPEXC ;IN EXEC MODE?
JRST REST07 ;NO, GO TO USER-MODE CODE
> ;END IFN FTDEC20
IFE FTDEC20,<
SKPUSR>
CONO PI,@SAVPI ;YES, RESTORE PI
XJRSTF XSAVE ;RETURN TO DDT OR USER
> ;END IFN FTEXEC
IFN FTDEC20&<^-FTMON>,<
REST07: MOVEM T1,SWTEM ;SAVE T1 FOR A MOMENT
MOVEI T1,.FHSLF ;POINT TO OUR FORK
SKIPGE SAVSTS ;HAVE TO TURN PSI SYSTEM BACK ON?
EIR% ;YES, DO IT
MOVE T1,SWTEM ;NO, RESTORE T1 (MAY GET PSI TRAP FIRST)
> ;END IFN FTDEC20&<^-FTMON>
XJRSTF XSAVE ;AND RETURN TO USER
SUBTTL ENTER AND LEAVE DDT -- SWAP
;STILL FTFILE
;ROUTINE TO SWAP BETWEEN DDT AND USER CONTEXTS.
; ACS AND FLAGS ARE SWAPPED, BUT BREAKPOINTS AND OTHER STUFF
; ARE NOT TOUCHED, SINCE CONTROL IS EXPECTED TO RETURN TO DDT SOON.
SWAPG: MOVEM T,SWTEM ;SAVE T FOR MOMENT
SKIPE SARS ;GOING TO USER CONTEXT?
JRST SWAP2 ;YES, JUST SET NEW FLAGS
HLLZ T,SWAP ;NO, NEED TO SAVE CURRENT FLAGS
SKPS0 ;VALID?
XSFM T ;NO, GET REAL PC FLAGS
MOVEM T,PCFLG ;SAVE OLD USER FLAGS
SWAP2: MOVE T,PCFLG ;SET USER FLAGS
MOVEM T,XSWAP ;SET UP FOR XJRSTF
SKPNS0 ;IN SECTION 0?
HLLM T,SWAP ;YES, SET UP FOR JRSTF
MOVE T,SWTEM ;RESTORE T
EXCH 0,AC0 ;SWAP AC 0
MOVEM 0,SAV0 ;SAVE 0 FOR WORK
MOVE 0,[EXCH 1,AC0+1];SETUP INST FOR SWAPPING ACS
SWAPL: XCT 0 ;SWAP AN AC
ADD 0,[Z 1,1] ;INC AC AND MEM FIELDS
TXNE 0,<Z 17,> ;OVERFLOWED AC FIELD?
JRST SWAPL ;NO, LOOP
MOVE 0,SAV0 ;YES, RESTORE SAVED AC
SETCMM SARS ;REMEMBER WE HAVE SWAPPED CONTEXTS
SKPNS0 ;IN NON-ZERO SECTION?
JRSTF @SWAP ;RETURN, RESTORING NEW FLAGS
XJRSTF XSWAP ;RETURN, RESTORING NEW FLAGS
;SECCHG - SWITCH DDT'S SECTION
;CALL IS:
;
; MOVX R,<ADR>
; JSP TT,SECCHG
; RETURN ALWAYS
;
;THE STACK IS (ULP!) UPDATED ACCORDINGLY . . .
SECCHG: HRRZ TT1,P ;CURRENT STACK LEVEL
SKPS0 ;ARE WE IN SECTION 0 GOING OUT?
JRST SECCH4 ;NO
;LOOP CHANGING ALL SECTION-0 PC'S ON THE STACK INTO SECTION-LH(R)
SECCH1: HLLZ TT2,(TT1) ;CURRENT STACK ENTRY
TDC TT2,TT ;CONTRAST WITH SECTION-0 PC FLAGS
TLNE TT2,-1 ;LOOK LIKE A PROBABLE PC?
JRST SECCH2 ;NO
HRRZ TT2,(TT1) ;YEAH, GET SECTION-LOCAL PC
CAIL TT2,DDT ;IS WITHIN DDT RANGE?
CAILE TT2,DDTEND ; . . .
CAIA ;NO
HLLM R,(TT1) ;YES, MAKE IT A SECTION-N PC THEN
SECCH2: CAILE TT1,PDL ;STILL ON THE STACK?
SOJA TT1,SECCH1 ;YES, KEEP ON GOING
SECCH4: HLLM R,TT ;POSITION SECTION
HLLZM R,SECDDT ;NOTE DDT'S NEW SECTION
HLLM R,PDL ;TOP OF STACK IS ALWAYS A DDT PC
HLLM R,XPDL ;AS IS EMERGENCY RETURN
TLNN R,-1 ;GOING INTO SECTION 0?
SETZM SYMVAL ;YES, MIGHT INVALIDATE SYMBOL TABLE POINTERS
XJRST TT ;RETURN TO CALLER IN NEW SECTION
SUBTTL ENTER AND LEAVE DDT -- BCOM
;STILL IFE FTFILE
;HERE FROM THE JSR IN THE BREAKPOINT BLOCK ON ANY BREAKPOINT.
;FIRST, DECIDE WHETHER OR NOT TO BREAK (CONDITIONS, PROCEED COUNT).
BCOMG: SETZM SARS ;ALWAYS SAVE REGISTERS
JSR SAVE ;SAVE THE WORLD
TDZA W1,W1 ;FLAG BREAKPOINTS NEED TO BE REMOVED
SETO W1, ;FLAG BREAKPOINTS ALREADY REMOVED
;NOW FIGURE OUT WHAT HAPPENED
HRRZ S,BCOM ;SEE WHICH BREAKPOINT WE CAME FROM
SUBI S,BPT$B+B$JSR+1 ;S:=BREAKPOINT NUMBER * B$SIZ
MOVEM S,BPTDX ;SAVE "INDEX" FOR LATER
MOVE R,BPT$B+B$BPT(S);REAL ADDRESS (+1) FROM WHENCE WE CAME
JUMPN R,BCOMG2 ;0 IF JUMPED FROM SEC 0 INTO NON-0
MOVE TT,S ;REAL PC IS IN BPT BLOCK
IDIVI TT,B$SIZ ;GET BPT NUMBER
SOS TT ;NO BPT 0 IN BPBLK
IMULI TT,NBPBW ;GET OFFSET INTO BLOCK
HRRZ R,BPBLK ;GET THE BLOCK BASE ADR
ADD R,TT ;WHERE BPT JSR'D TO
HLL R,BPT$B+B$ADR(S);IN THE RIGHT SECTION
PUSHJ P,FETCH ; FROM THE BLOCK IN ITS SECTION
JRST ERR ;CAN'T GET ADR
TLNN R,-1 ;IF FROM SECTION 0,
TLZ T,-1 ;DON'T KEEP THE FLAGS
SKIPA R,T ;MOVE INTO PROPER AC
BCOMG2: SKPS0 ;RUNNING IN NON-ZERO SECTION?
TRNA ;$4M OR NZS, KEEP FULL PC
ANDI R,-1 ;NO, ONLY 18-BITS OF PC
SKIPE S ;BREAKPOINT 0?
HRRI R,-1(R) ;NO - BACKUP PC BY 1
MOVEM R,PCWRD ;SAVE FOR $X ET AL
HLLZM R,LLOCS ;SET CURRENT SECTION TO BPT SECTION
SETOM BPTIP ;FLAG BREAKPOINT IN PROGRESS
PUSHJ P,FETCH ;GET A COPY OF THE BPT INSTRUCTION
JRST BCOMG4 ;INACCESSIBLE? TOO BAD...
MOVE W2,T ;SAVE IT AWAY
PUSHJ P,MAKBPT ;GET EXPECTED BPT INSTRUCTION
CAMN W2,T ;EXPECTED INSTRUCTION?
MOVEM R,BPT$B+B$ADR(S);YES, NOTE REAL PC OF THIS BREAKPOINT
BCOMG4: SKIPN W1 ;NEED TO REMOVE BREAKPOINTS?
PUSHJ P,REMOVB ;YES, REMOVE ALL BREAKPOINTS
JUMPE S,BREAK ;BREAKPOINT 0 (UNSOLICITED) ALWAYS BREAKS
;STILL IFE FTFILE
;NOW SEE WHETHER OR NOT TO BREAK
MOVS T,BPT$B+B$XCT(S);GET CONDITIONAL BREAK INSTRUCTION
CAIN T,(JFCL 0) ;IS IT A JFCL?
JRST BCOMG1 ;YES, OPTIMIZE - ONLY BREAK ON PROCEED CT
MOVSM T,I.NST ;NO, SAVE IT
SETOM SKPCT ;INIT. SKIP FLAG FOR CONDITIONAL INSTR.
IFN FTMON,<CHKIN> ;TAKE MDDT LOCK.
HLLZ T,LLOCS ;GET THE SECTION OF THE BREAKPOINT
CAME T,SECDDT ;AND COMPARE IT TO DDT'S SECTION.
JRST [XMOVEI W1,BCOMG3 ;EVENTUAL RETURN
SETZB W2,I.CJMP ;COUNT SKIPS; NO SPECIAL CASES.
PUSHJ P,$XBLK ;PACKAGE INSTR FOR EXECUTION
JRST RESTRX] ;T WAS SET BY $XBLK
JSP T,RESTOR ;GO BACK TO USER CONTEXT
XCT I.NST ;(USER) CONDITIONAL BREAK INSTR.
BCOMG3: AOS SKPCT ;NON-SKIP, SKPCNT=1
AOS SKPCT ;SINGLE-SKIP, SKPCNT=0
JSR SAVE ;DOUBLE-SKIP, SKPCNT=-1, BACK TO DDT
JFCL ;SAVE COULD CONCEIVABLY SKIP
IFN FTMON,<CHKOUT> ;GIVE UP MDDT LOCK.
SKIPGE SKPCT ;DOUBLE-SKIP?
JRST PROCD4 ;YES, CONTINUE USER PROGRAM
MOVE S,BPTDX ;NO, GET BREAKPOINT NUMBER BACK
SKIPE SKPCT ;SINGLE OR NON-SKIP?
BCOMG1: SOSG BPT$B+B$CNT(S) ;NON-SKIP, BREAK ON PROCEED COUNT
JRST BREAK ;SINGLE-SKIP, BREAK
JRST PROCD4 ;CONTINUE IF PROCEED COUNT SAYS NO
;STILL IFE FTFILE
;<< (MATCH ANGLE BRACKETS)
BREAK: PUSHJ P,TTYCLR ;FLUSH WAITING TTY CHARACTERS FOR INPUT
IFN FTEX10,< ;CPNDDT ONLY FOR -10
SKPUSR ;ONLY IN EXEC MODE
SKIPN R,JOBEDV ;GET .EDCNT ADDRESS
JRST BREAK0 ;NO CPNDDT IF NONE
SETZM CPNBIT ;IN CASE OF FAILURE
SKPKLS ;THIS ONLY WORKS ON A KL OR A KS
JRST BREAK0 ;FORGET IT IF NOT
ADDI R,.EDCPN-.EDCNT ;OFFSET TO CPNDDT ADDRESS WORD
PUSHJ P,FETCHV ;FETCH IT
JRST BREAK0 ;DON'T BOTHER IF CAN'T
JUMPE T,BREAK0 ;NOTHING TO DO IF NO CPNDDT
MOVEM T,CPNDDT ;SAVE CPNDDT ADDRESS
ADDI R,.EDCPU-.EDCPN ;OFFSET TO ASNTAB WORD
PUSHJ P,FETCHV ;RETRIEVE FROM MEMORY
JRST BREAK0 ;FORGET IT IF CAN'T
JUMPE T,BREAK0 ;NO CPNDDT PROCESSING IF NOT THERE
MOVE W1,T ;COPY FOR AOBJN LOOPING
PUSH P,T ;SAVE A COPY
APRID W2 ;GET OUR APR ID
ANDI W2,77777 ;MASK GOOD FOR KS AND NOT BAD FOR KL
SKPKS ;IF NOT A KS,
ANDI W2,7777 ;MASK FURTHER FOR KL
BREAK2: HRRZ R,W1 ;GET NEXT WORD TO TEST
PUSHJ P,FETCHV ;RETRIEVE FROM MEMORY
SETZ T, ;NOT TOO BAD IF NOT THERE
CAME T,W2 ;MATCHING APR SERIAL NUMBERS?
AOBJN W1,BREAK2 ;NO, LOOP
POP P,W2 ;YES OR EXPIRED, RESTORE INITIAL POINTER
JUMPGE W1,BREAK0 ;LOSE IF NO MATCH
SUB W2,W1 ;GET XWD JUNK,-CPU #
MOVSI T,(1B0) ;VALUE TO SHIFT
LSH T,(W2) ;GET BIT APPROPRIATE TO THIS CPU
MOVEM T,CPNBIT ;SAVE FOR PROCEED
MOVE R,CPNDDT ;WHERE TO STORE IT
PUSHJ P,STOREP ;STORE IT AWAY
SETZM CPNBIT ;GIVE UP ON RESTORE IF CAN'T
BREAK0:
> ;END FTEX10
SETZM I.LOG ;NO $X'S YET SINCE THIS BREAKPOINT
MOVE S,BPTDX ;BREAKPOINT INDEX (NUMBER * B$SIZ)
MOVEI T,"$" ;START OF BREAKPOINT MESSAGE
PUSHJ P,TOUT ;SEND IT OUT
MOVE A,S ;COPY OF INDEX
IDIVI A,B$SIZ ;REDUCE TO BREAKPOINT NUMBER
PUSHJ P,FP7 ;TYPE AS DECIMAL (SANS THE DOT)
MOVSI W1,(ASCII/B>/) ;REST OF BREAKPOINT TEXT
PUSHJ P,TEXT2 ;TYPE IT OUT
MOVEI T,">" ;IN CASE CONDITIONAL BPT
MOVE S,BPTDX ;RESTORE BREAKPOINT INDEX
SKIPG BPT$B+B$CNT(S) ;DID WE STOP ON USER'S CONDITIONAL BPT?
PUSHJ P,TOUT ;NO, NORMAL BPTS HAVE 2 ANGLE BRACKETS
MOVE T,PCWRD ;GET BREAKPOINT PC + 1
PUSHJ P,PSHLLC ;SAVE IN PC RING BUFFER
MOVX TT2,TT$BPI
TDNN TT2,TTYMSK ;USER WANTS ADR AND INSTRUCTION?
JRST [ PUSHJ P,PINST ;YES, DO IT
JRST BREAK1]
MOVEM T,LWT ;NO, JUST ADR WILL DO
MOVEM T,LLOC ;SET "."
PUSHJ P,PADR ;PRINT ADDRESS
BREAK1: MOVE S,BPTDX ;LI1 CRUMPS ON S
SKIPGE BPT$B+B$OPN(S) ;ADDRESS TO OPEN?
JRST BREAK4 ;NO
PUSHJ P,TTAB ;YES, TAB OVER FOR NEATNESS
MOVE T,BPT$B+B$OPN(S);GET ADDRESS TO OPEN
PUSHJ P,PSHLLC ;PUT ADDRESS IN PC RING BUFFER TOO
PUSHJ P,LI1 ;SHOW ADDRESS/CONTENTS
MOVE S,BPTDX ;AND AGAIN, LI1 CRUMPS ON S
BREAK4: MOVE R,BPT$B+B$FLG(S);GET BREAKPOINT FLAGS
TXNN R,BP$PRO ;AUTO-PROCEED IN EFFECT?
JRST BREAK6 ;NO, JUST BREAKPOINT NORMALLY
PUSHJ P,LISTEN ;YES, ANYTHING TYPED BY USER?
JRST PROCD2 ;NO, AUTO-PROCEED
BREAK6:
IFN FTYANK,<
SKIPN T,BPT$B+B$STR(S);GOT A COMMAND STRING TO BE EXECUTED?
JRST RET ;NO, BREAKPOINT COMPLETE THEN
MOVEM T,COMAND ;YES, FLAG NOW IN A "COMMAND FILE"
MOVEM T,COMCOR ;AND NOTE IT IS FROM A MEMORY STRING
HRLI T,(POINT 7,) ;CONCOCT A BYTE POINTER
MOVEM T,CBUF+1 ;TELL TIN WHERE TO FIND THE COMMAND
> ;END IFN FTYANK
JRST RET ;BREAKPOINT NORMALLY
;STILL IFE FTFILE
;INSERT BREAKPOINTS
INSRTB: PUSHJ P,SAVRST ;SAVE A FEW HANDY REGISTERS
MOVEI S,B$SIZ ;START WITH $1B
INSRT1: MOVE R,BPT$B+B$ADR(S);NEXT BREAKPOINT ADDRESS
JUMPE R,INSRT8 ;IF 0 THEN NO BREAKPOINT HERE
IFN FTMON,<CHKIN> ;INTERLOCK IN MDDT
MOVE T,BPT$B+B$FLG(S);FETCH THIS BREAKPOINT'S FLAGS
TXNE T,BP$INS ;IS BPT STILL INSERTED (REMOVE FAILED)?
JRST INSRT8 ;YES, LEAVE WELL ENOUGH ALONE
PUSHJ P,FETCH ;GET USER INSTRUCTION
JRST INSRT5 ;CAN'T, COMPLAIN
MOVEM T,BPT$B+B$INS(S);SAVE USER INSTRUCTION FROM BREAKPOINT
PUSHJ P,MAKBPT ;MAKE A BREAKPOINT INSTRUCTION
PUSHJ P,CHKBPT ;VERIFY THAT WE CAN USE IT
JRST INSRT4 ;OOPS, ERROR
JUMPE TT,INSRT6 ;IF "LOCAL", JUST INSERT BPT DIRECTLY
;"GLOBAL" BREAKPOINT = JSR TO AN XJRST TO DDT'S "JSR BCOMG"
SETZM BPT$B+B$BPT(S) ;CLEAR JSR (E) FOR LOCAL/GLOBAL CHECK
PUSHJ P,DEPMEM ;PUT "GLOBAL" BREAKPOINT INTO PROGRAM
JRST INSRT5 ;CAN'T, COMPLAIN
HRRI R,1(T) ;ADDRESS FOR THE XJRST
MOVSI T,(XJRST) ;BUILD "XJRST .+1"
HRRI T,1(R)
PUSHJ P,DEPMEM ;PUT XJRST INTO GLOBAL BREAKPOINT BLOCK
JRST INSRT5 ;COMPLAIN
HRRI R,1(R) ;"E" OF "XJRST .+1"
XMOVEI T,BPT$B+B$JSR(S);ADDRESS OF DDT'S BPT ENTRY
INSRT6: PUSHJ P,DEPMEM ;STUFF INTO USER PROGRAM
JRST INSRT5 ;COMPLAIN
MOVE T,BPT$B+B$FLG(S);FETCH BREAKPOINT'S FLAGS
TXO T,BP$INS ;BREAKPOINT HAS BEEN INSTALLED
TXZ T,BP$ERM ;AND HAS NO COMPLAINTS
MOVEM T,BPT$B+B$FLG(S);REMEMBER THAT
INSRT8: ADDI S,B$SIZ ;ADVANCE TO NEXT BREAKPOINT
CAIGE S,B$SIZ*<NBP+1> ;DONE THEM ALL YET?
JRST INSRT1 ;NO, GO DO NEXT ONE
POPJ P, ;YES, RETURN WITH BREAKPOINTS INSTALLED
INSRT4: SMERS <IS IN DIFFERENT SECTION> ;CAN'T SET BPT
INSRT5: PUSHJ P,INSRER ;NOTIFY USER
IFN FTMON,<CHKOUT> ;RELEASE ONE LOCK.
MOVX TT,BP$INS ;BREAKPOINT-INSTALLED FLAG
ANDCAM TT,BPT$B+B$FLG(S) ;THIS BPT NOT INSTALLED
JRST INSRT8 ;TRY THE NEXT ONE
;STILL IFE FTFILE
;BUILD "LOCAL" OR "GLOBAL" BREAKPOINT INSTRUCTION
;
;BREAKPOINT INSTRUCTIONS COME IN TWO FLAVORS:
; JSR $NB+B$BPT ;LOCAL BREAKPOINT
; JSR BPBLK+N ;GLOBAL BREAKPOINT
;IN THE CASE OF A GLOBAL BREAKPOINT, THE CALLER MUST PUT THE XJRST AND
;THE FINAL DESTINATION ADDRESS ($NB+B$JSR) IN THE BREAKPOINT BLOCK.
;
;CALL:
; R/ ADDRESS OF BREAKPOINT
; S/ BREAKPOINT "INDEX"
; PUSHJ P,MAKBPT
; T/ BREAKPOINT INSTRUCTION OR 0 IF ERROR.
; TT/ 0 IF "LOCAL" BREAKPOINT, ADDRESS FOR XJRST IF "GLOBAL" BREAKPOINT
;
;THE CALLER IS RESPONSIBLE FOR VALIDITY-CHECKING THINGS (CALLING CHKBPT).
MAKBPT: HRRZ T,BPBLK ;GET GLOBAL BREAKPOINT BLOCK (IF ANY)
JUMPN T,MAKBP3 ;IF SET, THEN ALL BREAKPOINTS ARE "GLOBAL"
MOVSI T,(JSR) ;LOCAL BREAKPOINT, JUST NEED JSR
HRRI T,BPT$B+B$BPT(S); INTO BREAKPOINT AREA
SETZ TT, ;FLAG ZERO FOR "LOCAL" BREAKPOINT
POPJ P, ;ALL DONE
MAKBP3: MOVE TT,S ;NEED REAL BPT INDEX
IDIVI TT,B$SIZ ;GET BPT NUMBER
SOS TT ;NO BPT 0 IN BPBLK
IMULI TT,NBPBW ;GET BPBLK OFFSET
ADD T,TT ;OFFSET INTO GLOBAL BREAKPOINT BLOCK
HRLI T,(JSR) ;FINISH CONCOCTING "GLOBAL" BPT INST
AOJA TT,CPOPJ ;RETURN WITH T/INST AND TT/NONZERO
;STILL IFE FTFILE
;CHKBPT - VERIFY THAT BREAKPOINT FROM MAKBPT CAN BE INSERTED
;CALL IS:
;
; PUSHJ P,MAKBPT
; PUSHJ P,CHKBPT
; ERROR RETURN
; NORMAL RETURN
;
;ON ENTRY, ASSUMES ACS AS SETUP VIA MAKBPT.
;
;ON ERROR RETURN, THE BREAKPOINT CAN'T BE SET - EITHER DDT IS NOT MAPPED
;INTO THE SECTION FOR A LOCAL BREAKPOINT, OR THE GLOBAL BREAKPOINT BLOCK
;DOESN'T EXIST/ISN'T WRITABLE.
;
;ON NORMAL RETURN, THE BREAKPOINT CAN SAFELY BE INSERTED.
CHKBPT: PUSHJ P,SAVRST ;SAVE THE REGS
PUSH P,TT ;SAVE TT ALSO
JUMPN TT,CHKBP5 ;IF GLOBAL, VERIFY THE $4M BLOCK
;LOCAL BREAKPOINT, DDT MUST BE MAPPED IN THE BREAKPOINT SECTION
ANDCMI R,-1 ;JUST SECTION NUMBER
CAMN R,SECDDT ;BREAKPOINT TO DDT'S SECTION?
JRST CHKBP7 ;YES, OK THEN
PUSHJ P,RWEMAP ;ARE WE MAPPED IN THE RIGHT SECTION?
JRST CHKBP8 ;NO, THEN THIS BREAKPOINT CAN'T BE DONE
JRST CHKBP7 ;YES, THIS BREAKPOINT IS OK
;GLOBAL BREAKPOINT, VERIFY THE $4M BLOCK
CHKBP5: HRR R,BPBLK ;SECTION-RELATIVE $4M BLOCK
PUSHJ P,CHKBP6 ;CHECK PAGE ACCESSIBILITY
JRST CHKBP8 ;NO, CAN'T SET A BREAKPOINT HERE
ADDI R,BPBLEN ;RANGE-CHECK END OF BLOCK
PUSHJ P,CHKBP6 ;GET PAGE ACCESSIBILITY
TRNA ;NON-WRITABLE
CHKBP7: AOS -1(P) ;YES, SUCCESSFUL (SKIP) RETURN INDICATED
CHKBP8: POP P,TT ;RESTORE LOCAL/GLOBAL FLAG
POPJ P, ;RETURN AS APPROPRIATE
;HERE TO CHECK BP BLOCK ADDRESSES FOR WRITEABLE/CREATEABLE
CHKBP6: PUSHJ P,CHKADR ;GET PAGE ACCESSIBILITY
TXNE TT,PG$WRT ;IF ALREADY WRITABLE,
JRST CPOPJ1 ;JUST RETURN SUCCESS
TXNE TT,PG$EXI ;IF NON-WRITABLE BUT IT EXISTS,
POPJ P, ;WE LOSE
SETZ T, ;GET A ZERO TO DEPOSIT
PUSHJ P,DEPMEM ;TRY TO CREATE THE PAGE
POPJ P, ;LOSE IF WE CAN'T
PUSHJ P,CHKADR ;GET NEW PAGE ACCESSIBILTY
TXNE TT,PG$WRT ;IF NOW WRITABLE,
AOS (P) ;WE WILL SUCCEED
POPJ P, ;OTHERWISE FAIL
;RWEMAP - VERIFY THAT DDT IS MAPPED INTO SPECIFIED VIRTUAL SECTION
;CALL IS:
;
; MOVX R,<ADR>
; PUSHJ P,RWEMAP
; ERROR RETURN
; NORMAL RETURN
;
;WHERE <ADR> IS THE "USER VIRTUAL ADDRESS" INTO WHICH SECTION DDT MUST BE
;MAPPED (CALLED FROM $X).
;
;ON ERROR RETURN DDT IS DEFINITELY NOT MAPPED INTO THE DESIRED VIRTUAL
;SECTION.
;
;ON NORMAL RETURN, DDT IS MOST PROBABLY MAPPED INTO THE DESIRED VIRTUAL
;SECTION.
RWEMAP: PUSHJ P,SAVRST ;SAVE CALLER'S "R", "S", AND "T" REGISTERS
MOVE T,PCFLG ;GET A RELATIVELY-RANDOM BIT PATTERN
XOR T,PCWRD ;MAKE IT A TAD MORE RANDOM
PUSH P,T ;MAKE A SCRATCHABLE COPY OF IT
HRR R,P ;GLOBAL REFERENCE TO RANDOM BIT PATTERN
PUSHJ P,FETCH ;FETCH OTHER-SECTION'S CONTENTS
JRST RWEMA8 ;WE DEFINITELY ARE *NOT* MAPPED
CAME T,0(P) ;THAT SECTION MATCH OUR SECTION?
JRST RWEMA8 ;NO, THEN NOT MAPPED
SETCMM 0(P) ;NOW CHANGE OUR LOCAL COPY
PUSHJ P,FETCH ;AND FETCH OTHER-SECTION'S COPY
JRST RWEMA8 ;DUH????
CAME T,0(P) ;DOES IT STILL MATCH?
JRST RWEMA8 ;NO, THEN NOT MAPPED AFTER ALL (SNEAKY!)
POP P,T ;YES, ALMOST CERTAINLY MAPPED TOGETHER
JRST CPOPJ1 ;TAKE GOOD (MAPPED) RETURN
RWEMA8: POP P,T ;PITCH RANDOM BIT PATTERN
POPJ P, ;TAKE BAD (UNMAPPED) RETURN
;STILL IFE FTFILE
;REMOVE BREAKPOINTS
REMOVB: PUSHJ P,SAVRST ;SAVE A FEW REGISTERS
MOVEI S,B$SIZ*NBP ;START WITH LAST BPT
REMOV1: SKIPG R,BPT$B+B$ADR(S);ADDRESS OF THIS BREAKPOINT (IF ANY)
JRST REMOV8 ;NONE
MOVE T,BPT$B+B$FLG(S);FETCH BREAKPOINT'S FLAGS
TXNN T,BP$INS ;IS IT INSTALLED?
JRST REMOV8 ;NO, AND USER ALREADY KNOWS
PUSHJ P,FETCH ;GET CURRENT BREAKPOINT INSTR
JRST REMOV6 ;CAN'T READ IT? LET THE WRITE FAIL...
MOVE W2,T ;SAVE THE INSTRUCTION
PUSHJ P,MAKBPT ;GET THE EXPECTED INSTRUCTION
CAME W2,T ;IS OUR BREAKPOINT SAFE?
JRST REMOV4 ;NO - TRASHED OR MOVED
REMOV6: MOVE T,BPT$B+B$INS(S);INSTRUCTION THAT BELONGS AT THIS BPT
PUSHJ P,DEPMEM ;PUT USER INSTRUCTION BACK
JRST REMOV5 ;CAN'T, COMPLAIN
MOVX T,BP$INS!BP$ERM ;BREAKPOINT-INSTALLED, ERROR FLAGS
ANDCAM T,BPT$B+B$FLG(S);NOTE BREAKPOINT SUCCESSFULLY REMOVED
REMOV7:
IFN FTMON,<CHKOUT> ;RELEASE ONE LOCK.
REMOV8: SUBI S,B$SIZ ;ADVANCE TO NEXT BREAKPOINT
CAIL S,B$SIZ ;DONE THEM ALL YET?
JRST REMOV1 ;NO, GO REMOVE NEXT ONE
POPJ P, ;YES, ALL BREAKPOINTS REMOVED
REMOV4: SMERS <BREAKPOINT INSTRUCTION TRASHED OR MOVED>
REMOV5: PUSHJ P,REMOER ;TELL USER CAN'T REMOVE BPT
JRST REMOV7 ;TRY FOR THE REST
;STILL IFE FTFILE
;ISSUE DIAGNOSTIC IF BPT INSERTION/REMOVAL FAILS. USER SHOULD KNOW HE
;IS BEING SCREWED.
REMOER: SKIPA W1,[[ASCIZ /% CAN'T REMOVE $/]]
INSRER: MOVEI W1,[ASCIZ /% CAN'T INSERT $/]
MOVX TT,BP$ERM ;MESSAGE-TYPED FLAG
TDNE TT,BPT$B+B$FLG(S) ;ALREADY TOLD USER OF THIS PROBLEM?
POPJ P, ;YES, ONCE IS ENOUGH
IORM TT,BPT$B+B$FLG(S) ;NO, REMEMBER WE'RE ABOUT TO
PUSH P,S ;SAVE INDEX
PUSHJ P,TSTRG ;BEGIN MESSAGE
MOVE A,S
IDIVI A,B$SIZ ;GET BPT NUMBER
PUSHJ P,FP7 ;TYPE IT
MOVEI W1,[ASCIZ /B BECAUSE /]
PUSHJ P,TSTRG
SKIPN W1,MEMERS ;HAVE SPECIFIC MESSAGE?
MOVEI W1,[ASCIZ /MEM REF FAILED/] ;NO, GENERAL ONE
PUSHJ P,TSTRG
POP P,S
PJRST TCRLF ;CRLF AND RETURN
> ;END IFE FTFILE
SUBTTL ENTER AND LEAVE DDT -- FAKDDT
IFN FTEX20,< ;ONLY IN KDDT
;FAKDDT -- FAKE OUT BREAKPOINTS AFTER KDDT CHANGES SECTION.
;CALL:
; JSR @[SECDDT,,FAKDDT]
; RETURN
;
;CALLED BY TOPS-20 DIRECTLY, AFTER KDDT HAS BEEN MOVED FROM ONE SECTION
;TO ANOTHER. MAKES SURE THAT ALL BREAKPOINTS WILL BREAK TO THE CORRECT
;SECTION, AND DOES SOME MANIPULATION OF $5M AND $6M SO THE DEFAULTS
;WORK OUT OK UNDER ALL CIRCUMSTANCES.
FAKDDG: JSR SAVE ;ENTER DDT CONTEXT
PUSHJ P,REMOVB ;PUT ORIGINAL BPT INSTRS BACK
SETZM SYTLOC ;0$5M (POSTLD CHANGES MONPDV)
SKPEXC ;FIGURE OUT DEFAULT FOR $6M
TDZA T,T ;USER MODE DOESN'T HAVE SECTIONS 0 AND 1
MOVX T,<MSEC1,,0> ; MAPPED TOGETHER, EXEC MODE DOES
MOVEM T,PDFSEC ;SET $6M
MOVE T,FAKDDT ;GET RETURN ADDRESS
SKPNS0 ;IN SECTION ZERO?
TLZ T,-1 ;CLEAR RANDOM FLAGS
PUSHJ P,INSRTB ;PUT IN BREAKPOINTS TO WHERE WE ARE NOW
JRST RESTOR ;BACK TO TOPS-20
> ;END IFN FTEX20
SUBTTL WORD TYPEOUT AND FORMATTING ROUTINES
;HERE TO TYPE OUT A WORD JUST FETCHED FROM MEMORY, AS WHEN A REGISTER
;HAS JUST BEEN OPENED. USES THE CURRENT TYPEOUT MODE UNLESS LF1 IS SET.
CONSYM: MOVEM T,LWT
IFN FTFILE&FTDEC10,<
MOVEM T,POKBLK+1 ;STORE FOR /P/M LOGIC
> ;END IFN FTFILE&FTDEC10
TRNN F,LF1
JRST (SCH) ;PIN OR FTOC
TRNE F,CF1
JRST FTOC ;TYPE OUT AS CONSTANT
;PRINT OUT IN INSTRUCTION FORMAT
;LOOK FOR MACHINE INSTRUCTIONS BEFORE USER-DEFINED OPCODES
PINQ: TDC T,[XWD -1,400000] ;IS THIS A NEGATIVE NUMBER?
TDCN T,[XWD -1,400000]
JRST PADS3B ;TYPE AS NEG NUM
HLLZ T,LWT ;LOOK AT OPCODE ONLY
TLZ T,777
JUMPE T,HLFW ;DO HALFWORDS IF NOT A POSSIBLE OPCODE
TXNE T,700B8 ;POSSIBLY A MACHINE CODE?
CAMN T,[JSYS] ;BUT NOT JSYS?
JRST PIN0A
TLC T,700000 ;CHECK FOR AN I/O INSTRUCTION
TLCN T,700000 ;NEED TO DECODE FIELDS DIFFERENTLY IF SO
JRST INOUTB ;IS AN I/O INST, GO HANDLE IT
PUSHJ P,OPTYPE ;YES, TRY FOR IT
TRNE F,ITF ;DID OPCODE?
JRST PIN2 ;YES, CONTINUE WITH REST OF INST
JRST PIN0A ;NO, TRY COMBINATIONS FROM SYM TAB
;LOOK FOR USER-DEFINED OPCODES BEFORE MACHINE INSTRUCTIONS
PIN: TDC T,[XWD -1,400000] ;IS THIS A NEGATIVE NUMBER?
TDCN T,[XWD -1,400000]
JRST PADS3B ;TYPE AS NEG NUM
PIN0A: MOVE T,LWT ;GET FULL WORD
TXNE T,777B8 ;IF THERE'S AN OPCODE,
TRO F,OKAF ;DON'T TYPE "#" AFTER OPERATOR
PUSHJ P,LOOK ;DO 36-BIT OPERATOR SEARCH
JRST PIN0B ;NOPE
JRST [ CAMGE S,SYMOFS ;WITHIN RANGE?
TXNE T,^-VMADR ;AND A GLOBAL ADDR?
JRST PIN0B ;NO, TRY SOMETHING ELSE
JRST PADSOE] ;YES, TYPE SYMBOL+OFFSET
POPJ P, ;EXACT MATCH, ALL DONE
;NOW TRY FOR OPERATORS OF FORM OPCODE + E-FIELD
PIN0B: TLC T,700000 ;CHECK FOR AN I/O INSTRUCTION
TLCN T,700000 ;NEED TO DECODE FIELDS DIFFERENTLY IF SO
JRST INOUT ;IS AN I/O INST, GO HANDLE
TXNN T,777B8 ;0 OPCODE?
JRST HLFW ;YES, NEVER PRINT AS INSTRUCTION
IFN FTOPX,< ;SKIP THIS IF WE WANT TO BE FAST
MOVE T,LWT ;FRESH COPY OF WORD
TXNN T,<Z @-1(17)> ;IS E-FIELD ALL ZERO?
JRST PIN0D ;YES, NO SPECIAL SEARCH
TXZ T,<Z 17,> ;MASK OUT AC FIELD
CAME T,[TTCALL 0,] ;DON'T TYPE "INCHRW 17,"
PUSHJ P,LOOK ;LOOK FOR SYMBOLIC OPERATOR
JRST PIN0D ;NOPE
JRST PIN0D ;NOPE
PUSHJ P,TSPC ;MATCH!!! SPACE OVER
LDB T,[POINT 4,LWT,12] ;GET AC FIELD
JUMPE T,CPOPJ ;AC FIELD NULL, ALL DONE
PUSHJ P,PAD ;TYPE OUT SYMBOLIC AC FIELD
MOVEI T,"," ;CAP OFF AC FIELD WITH COMMA
PJRST TOUT ;AND TYPEOUT IS COMPLETE
;STILL IFN FTOPX
;NOW TRY FOR OPCODE AND AC FIELD
PIN0D: HLLZ T,LWT ;FRESH COPY OF WORD
TXZ T,37B17 ;REDUCE TO OPCODE AND AC FIELD
CAME T,[CALLI 0] ;CALLI?
CAMN T,[MTAPE 0] ;OR MTAPE?
JRST PIN0F ;YES, DON'T TYPE "RESET 1234"
PUSHJ P,LOOK ;SEE IF ANY SUCH ANIMAL
JRST PIN0F ;NOPE
JRST PIN0F ;NOPE
TXO F,NAF ;YEP, SO ALLOW NEGATIVE ADDRESS
PUSHJ P,TSPC ;SPACE OVER ONE
JRST PI4 ;AND GO TYPE OUT I, X, AND Y
> ;END IFN FTOPX
;LAST TRY FOR A USER SYMBOL - OPCODE FIELD ONLY
PIN0F: HLLZ T,LWT ;FRESH COPY OF WORD
TLZ T,777 ;OPCODE ONLY
CAME T,[CALLI 0,0] ;A CALLI?
CAMN T,[TTCALL 0,0] ;OR A TTCALL?
JRST PIN0H ;YES, DON'T TYPE "RESET 200064" ETC.
CAMN T,[MTAPE 0,0] ;AN MTAPE?
JRST PIN0H ;YES, DON'T TYPE "MTWAT. 37" ETC.
PUSHJ P,LOOK ;SEE IF USER SYMBOL
JRST PIN0H ;NOPE
JRST PIN0H ;NOPE
JRST PIN2 ;GOT IT, TYPE AC, I, X, AND Y
;LAST DITCH - LOOK AT NORMAL HARDWARE OPCODES
PIN0H: TRZ F,OKAF ;CLEAR CROCK FLAG
HLLZ T,LWT ;FRESH COPY OF WORD
TLZ T,777 ;OPCODE ONLY
PUSHJ P,OPTYPE ;TRY INTERNAL TABLES
TRNN F,ITF ;DID WE WIN?
PJRST HLFW ;COMPLETELY UNKNOWN OPERATOR
;FALL INTO PIN2 ON NEXT PAGE
;COMMON INSTRUCTION-FORMAT TYPEOUT CODE
PIN2: TRO F,NAF ;EXACT MATCH TYPED, ALLOW NEG ADDRESSES
PUSHJ P,TSPC
LDB T,[XWD 270400,LWT] ;GET AC FIELD
JUMPE T,PI4
HLRZ W,LWT
CAIL W,(JRST)
CAILE W,256777 ;IS INST BETWEEN JRST AND XCT?
JRST [ PUSHJ P,PAD ;NO, PRINT SYMBOLIC AC
JRST PI3A]
PUSHJ P,TOC ;YES, PRINT NUMERIC AC
PI3A: MOVEI W1,","
PUSHJ P,TEXT
PI4: MOVE W1,LWT
TXNE W1,<@> ;CHECK FOR INDIRECT BIT
JRST PI80 ;YES, ALWAYS SYMBOLIC ADDRESS
HRRZ T,LWT
LDB W,[XWD 331100,LWT] ;INSTRUCTION BITS
MOVE W1,W ;GET COPY
TRC W1,600
TRNN W1,710 ;IS INST TRXX OR TLXX?
JRST [ PUSHJ P,TOC ;YES, PRINT ADDRESS NUMERIC
JRST PI7] ;CONTINUE WITH INDEX CHECK
CAIL W,240
CAILE W,247
JRST PI84 ;ALL (EXCEPT ASH,ROT,LSH) HAVE SYMBOLIC ADRS
CAIN W,<JFFO>_-33 ;JFFO?
JRST PI84 ;SYMBOLIC ADDRESS
PUSHJ P,PADS3A ;ONLY ABSOLUTE ADDRESSING FOR LSH, ASH, AND ROT
PI7: TRZ F,NAF
LDB R,[XWD 220400,LWT] ;INDEX REGISTER CHECK
JUMPE R,CPOPJ ;EXIT
MOVEI T,"("
PUSHJ P,TOUT
MOVE T,R
PUSHJ P,PAD
MOVEI T,")"
JRST TOUT ;EXIT
PI80: MOVEI T,"@" ;SYMBOLIC INDIRECT BIT
PUSHJ P,TOUT ;TYPE IT
HRRZ T,LWT ;GET 18-BIT Y-FIELD FOR SYMBOLIC ADDRESS
PI84: TRO F,ITF ;FLAG INSTRUCTION IN PROGRESS
CAIE AR,TOC ;IF NOT $A
HLL T,LLOCS ;ADDRESS STARTS WITH CURRENT SECTION
PUSHJ P,PADR1 ;PRINT SYMBOLIC (UNLESS $A)
JRST PI7 ;CHECK FOR INDEXING
HLFW: HLRZ T,LWT ;PRINT AS HALF WORDS
JUMPE T,HLFW1 ;TYPE ONLY RIGHT ADR IF LEFT ADR=0
TRO F,NAF ;ALLOW NEGATIVE ADDRESSES
PUSHJ P,PAD ;PRINT AS 18-BIT "ADDRESS"
MOVSI W1,(ASCII /,,/)
PUSHJ P,TEXT2 ;TYPE ,,
HLFW1: HRRZ T,LWT
PUSHJ P,PAD ;PRINT AS 18-BIT ADDRESS
TRZ F,NAF ;TURN NAF BACK OFF
POPJ P, ;DONE
;PRINT ADDRESSES (ARG USUALLY 18 BITS BUT CAN BE 36 BITS)
PAD: ANDI T,-1 ;PRINT ONLY RIGHT HALF
PADR: TXZ F,ITF ;NOT IN INSTRUCTION TYPEOUT
PADR1: TXZ F,OKAF ;WANT # TO SHOW UP
TLNN T,377777 ;DDAF VALID ONLY ON PURE IFIW
TXZN T,DDAF ;DDT INTERNAL ADDRESS?
JRST (AR) ;NO, PADSO OR TOC
MOVE TT,T
PUSHJ P,DDSYMC ;YES, LOOK IT UP
JRST [ MOVEI T,"?" ;NOT VALID
PJRST TOUT] ;TYPE QMARK
SUB T,TT2 ;CONVERT ADR TO OFFSET
MOVEM T,TEM ;SAVE OFFSET
MOVE W1,1(TT1) ;GET TEXT FOR INTERNAL NAME
PUSHJ P,TEXT2 ;TYPE IT
SKIPN TEM ;OFFSET?
POPJ P, ;NO, DONE
JRST PADS2 ;YES, GO TYPE IT
PADSO: JUMPE T,FP7B ;PRINT A ZERO
PUSHJ P,LOOK
JRST PADS3 ;NOTHING FOUND, TYPE NUMERIC
CAIA ;SOMETHING FOUND
POPJ P, ;EXACT MATCH FOUND AND TYPED
PADSOE: MOVE TT1,S ;COPY OFFSET
MOVE TT2,SYMOFS ;AND GET HIGHEST ALLOWABLE OFFSET
TXC TT1,1B0 ;TURN INTO UNSIGNED NUMBERS
TXC TT2,1B0 ;SO CAN COMPARE THEM
CAMGE TT1,TT2 ;ADR WITHIN SYMBOL + OFFSET RANGE?
TXNN W,-20 ;PRINT ACS THAT DON'T MATCH EXACTLY NUMERICALLY
JRST PADS3 ;PRINT ADDRESS NUMERICALLY
TLNN W,-1 ;IS SYMBOL IN SECTION 0?
TLNN T,-1 ;YES, IS ADDRESS NOT IN ZERO?
CAIA ;CASE DOESN'T APPLY, CONTINUE
JRST PADS3 ;YES, DONT TYPE DDT+10000 FOR 1,,0
TXNN F,NAF ;AM I GOING TO TYPE SYM+OFFS OR -1?
JRST PADS1 ;ALWAYS TYPE SYM+OFFS, EVEN NEAR -1
CAIL T,-100 ;IS ADDR BETWEEN 0,,-100 AND 0,,-1?
CAILE T,-1 ; . . .
JRST PADS1 ;NO, TYPE AS SYM+OFFSET
JRST PADS3 ;YES, TYPE AS -N FOR "MOVEI -1" TYPEOUT
PADS1: MOVEM S,TEM
PUSHJ P,PSYM0
MOVEI T,"#"
TXNE F,MDLCLF ;SYMBOL IS OUTSIDE LOCAL?
PUSHJ P,TOUT ;YES, FLAG
PADS2: MOVEI T,"+"
PADS1A: PUSHJ P,TOUT
MOVE T,TEM
JRST TOCA ;TYPE WITHOUT COMMAS
PADS3: TLNE T,-1 ;GLOBAL (30-BIT) ADDRESS?
JRST PADS5 ;YES, TYPE AS SECNUM,,TAG
PADS3A: TRNN F,NAF ;NEGATIVE ADDRESSES ALLOWED?
JRST TOC ;NO, JUST TYPE OUT OCTAL (OR WHATEVER)
CAIGE T,776000 ;".LT. -2000" ?
JRST TOC
PADS3B: MOVN T,T ;WANT TO TYPE OUT AS A NEGATIVE NUMBER
HRRZM T,TEM ;BUT ONLY 18-BITS WORTH
MOVEI T,"-"
JRST PADS1A
PADS5: TRNE F,ITF ;INSTRUCTION ALREADY TYPED?
JRST PAD ;YES, DON'T USE HALFWORD FORMAT
PUSH P,T ;SAVE T FOR MOMENT
HLRZ T,T ;GET GLOBAL SECTION NUMBER
PUSHJ P,TOC ;TYPE OUT AS NUMBER
MOVSI W1,(ASCII/,,/) ;SEPARATE TWO HALVES
PUSHJ P,TEXT2 ; WITH ,,
POP P,T ;GET BACK T
PJRST PAD ;AND TYPE LOW-ORDER 18 BITS
INOUT:
IFN FTOPX,< ;LOOK FOR USER OPERATORS
AND T,[777740,,0] ;OPERATOR & DEVICE CODE
TRO F,OKAF ;NO "#" AFTER OPERATOR SYMBOL
PUSHJ P,LOOK ;LOOK FOR USER-DEFINED OPERATOR
JRST INOUTB ;NOPE
JRST INOUTB ;NOPE
TRZ F,OKAF ;FOUND ONE, CLEAR KROCK FLAG
PUSHJ P,TSPC ;SPACE OVER FROM OPERATOR SYMBOL
JRST PI4 ;GO TYPE OUT I, X, AND Y FIELDS
INOUTB: MOVSI T,777000 ;JUST THE OPCODE FIELD
AND T,LWT ;(IN CASE KS-10 STYLE I/O INSTRUCTION)
LDB R,[POINT 6,T,8] ;EXTRACT MOST OF "DEVICE" FIELD
CAIL R,04 ;IF 'LESS' THAN "UMOVE"
SKPKS ;OR NOT KS-STYLE IO DECODE
JRST INOUT3 ;THEN NO "NORMAL" OPCODE TYPEOUT
TRO F,OKAF ;NO "#" AFTER OPERATOR SYMBOL
PUSHJ P,LOOK ;SEE IF ANY SUCH ANIMAL
JRST INOUT3 ;NOPE
JRST INOUT3 ;NOPE
TRZ F,OKAF ;FOUND A MATCH, CLEAR KROCK FLAG
JRST PIN2 ;AND TYPE AC, I, X, AND Y FIELDS NORMALLY
INOUT3: TRZ F,OKAF ;CLEAR KROCK FLAG
MOVE T,LWT ;RESTORE T
> ;END OF IFN FTOPX
IFE FTOPX,<INOUTB==INOUT>
LDB R,[POINT 7,T,9] ;PICK OUT IO DEVICE BITS
CAIL R,700_-2 ;IF DEVICE .L. 700, THEN TYPE
JRST HLFW ;TYPE AS HALF WORDS
LDB R,[POINT 3,T,12]
DPB R,[POINT 6,T,8] ;MOVE IO BITS OVER FOR OP DECODER
PUSHJ P,OPTYPE
PUSHJ P,TSPC
MOVSI T,077400
AND T,LWT
PUSHJ P,LOOK ;LOOK FOR DEVICE NUMBER
JRST INOUT2 ;NOTHING FOUND, PRINT AS OCTAL
JRST INOUT2 ;NO EXACT MATCH, PRINT AS OCTAL
JRST PI3A ;EXACT MATCH TYPED
INOUT2: LSH T,-30
PUSHJ P,TOC
JRST PI3A
;HERE TO PRINT A WORD IN BYTE POINTER FORMAT:
; P S [@][[Y](X) ! Y]
TBPNT: LDB T,[POINT 6,LWT,5] ;GET "P" BYTE FIELD
CAILE T,44 ;ONE-WORD GLOBAL?
JRST TBPNT1 ;YES, HANDLE DIFFERENTLY
TBPNT0: PUSHJ P,TOC ;TYPE OUT
PUSHJ P,TSPC ;FOLLOWED BY SPACE
LDB T,[POINT 6,LWT,11] ;SET "S" BYTE FIELD
PUSHJ P,TOC ;TYPE IT OUT
PUSHJ P,TSPC ;CAP OFF WITH ANOTHER SPACE
MOVE T,LWT ;GET THE BYTE POINTER
TLNN R,-1 ;GET HERE FOR SECTION 0?
JRST PI4 ;YES, DO NORMAL ADDR TYPEOUT
MOVE R,LLOCO ;GET THE BYTE POINTER'S LOC
HLLZ S,R ;FIND ITS SECTION
TXNN R,-20 ;IN ACS?
HLLZ S,PCWRD ;YES, USE PC SECTION INSTEAD
JUMPE S,PI4 ;NORMAL IF FROM SECTION 0
TLNN T,(1B12) ;TWO-WORD POINTER?
JRST PI4 ;NO, DO NORMALLY
HRRI R,1(R) ;YES, GET SECOND WORD
MOVEI W1,"?" ;IN CASE NOT FOUND
PUSHJ P,FETCH ;LOOK FOR SECOND WORD
JRST TEXT ;NOT FOUND
MOVEM T,LWT ;WORKING ON SECOND WORD NOW
SKIPGE W1,T ;IFIW ON?
JRST [ PUSHJ P,PI4 ;YES, DO NORMALLY
JRST FLAG2W]
MOVEI T,"@" ;INDIRECTION SYMBOL
TXNE W1,EFIWI1 ;GLOBAL INDIRECTION?
PUSHJ P,TOUT ;YES, TYPE IT
LDB T,[POINTR LWT,VMADR] ;GET GLOBAL ADDRESS
PUSHJ P,PADR ;TYPE IT OUT (WITH SECTION NO.)
LDB W1,[POINTR LWT,EFIWX] ;GET X FIELD
JUMPE W1,FLAG2W ;JUMP OVER INDEX TYPEOUT
MOVEI T,"(" ;TYPE INDEX OUT
PUSHJ P,TOUT
MOVE T,W1
PUSHJ P,PAD ;WITH SYMBOL IF APPROPRIATE
MOVEI T,")"
PUSHJ P,TOUT
FLAG2W: MOVE W1,[ASCII \ <2>\] ;FLAG TWO-WORD POINTER
JRST TEXT2 ;AND GO HOME
;HERE FOR ONE-WORD GLOBAL
TBPNT1: CAIN T,77 ;IS IT LEGAL?
JRST TBPNT0 ;NO, DON'T FOOL WITH IT
MOVEI TT,-44(T) ;SUBTRACT 44 FROM CODE
ADJBP TT,[POINT 6,PTBL] ;COMPUTE TABLE LOCATION
LDB T,TT ;GET DECODED P NUMBER
PUSHJ P,TOC ;TYPE IT OUT
MOVEI T,"&" ;AS IN P&S
PUSHJ P,TOUT
ADDI TT,STBL-PTBL ;SAME PLACE IN S TABLE
LDB T,TT ;GET DECODED S NUMBER
PUSHJ P,TOC ;TYPE IT OUT
PUSHJ P,TSPC ;NEATLY
LDB T,[POINTR LWT,VMADR] ;GET THE 30-BIT ADDRESS
JRST PADR ;AND TYPE IT ALL OUT
PTBL: BYTE(6) 44,36,30,22,14, 6
BYTE(6) 0,44,34,24,14, 4
BYTE(6) 44,35,26,17,10, 1
BYTE(6) 44,33,22,11, 0,44
BYTE(6) 22, 0
STBL: BYTE(6) 6, 6, 6, 6, 6, 6
BYTE(6) 6,10,10,10,10,10
BYTE(6) 7, 7, 7, 7, 7, 7
BYTE(6) 11,11,11,11,11,22
BYTE(6) 22,22
SUBTTL OUTPUT SUBROUTINES
FTOC: ;NUMERIC OUTPUT SUBROUTINE
TOC: HRRZ W1,ODF
CAIN W1,10 ;IS OUPUT RADIX NOT OCTAL, OR
TLNN T,-1 ;ARE THERE NO LEFT HALF BITS?
JRST TOCA ;YES, DO NOTHING SPECIAL
HRRM T,TOCS ;NO, TYPE AS HALF WORD CONSTANT
HLRZS T ;GET LEFT HALF
PUSHJ P,TOC0 ;TYPE LEFT HALF
MOVSI W1,(ASCII /,,/)
PUSHJ P,TEXT2 ;TYPE ,,
XCT TOCS ;GET RIGHT HALF BACK
TOCA: HRRZ W1,ODF ;IS OUTPUT RADIX DECIMAL?
CAIN W1,12
JRST TOC4 ;YES,TYPE SIGNED WITH PERIOD
TOC0: LSHC T,-43
LSH W1,-1 ;W1=T+1
DIVI T,(ODF)
PUSH P,W1
SKIPE T
PUSHJ P,TOC0
POP P,T
ADDI T,"0"
CAILE T,"9" ;RADIX-DIGIT .GT. 9?
ADDI T,"A"-"9"-1 ;YES, SHIFT TO LETTERS
JRST TOUT
TOC4: MOVE A,T ;TYPE AS SIGNED DECIMAL INTEGER
JUMPGE T,TOC5
MOVEI T,"-"
PUSHJ P,TOUT
TOC5: PUSHJ P,FP7 ;DECIMAL PRINT ROUTINE
TOC6: MOVEI T,"."
JRST TOUT
;SYMBOL OUTPUT SUBROUTINE
PSYM0: MOVEM W1,SPSAV ;SAVE POINTER TO TYPED SYM
PSYM: ;RADIX 50 SYMBOL PRINT
MOVE T,W2 ;GET SYMBOL
TXZ T,PNAME ;CLEAR OUT FLAGS
PSYM1: IDIVI T,50
PUSH P,W1
JUMPE T,PSYM2
PUSHJ P,PSYM1
PSYM2: POP P,T
PUSHJ P,PSYMT ;CONVERT RADIX50 TO ASCII
PJRST TOUT ;TYPE IT AND RETURN
PSYMT: ADDI T,"0"-1 ;CONVERT DIGIT
CAILE T,"9" ;WAS IT A DIGIT?
ADDI T,"A"-"9"-1 ;NO, TRY A LETTER
CAILE T,"Z" ;DID THAT FIT?
SUBI T,"Z"+2-"$" ;NO, TRY FOR PUNCTUATION
CAIN T,"$"-1 ;IS IT THE ODDBALL PUNCTUATION?
MOVEI T,"." ;YES, CONVERT TO THAT
CAIN T,"0"-1 ;OH, BY THE WAY,
MOVEI T," " ;ACCOUNT FOR SPACE
POPJ P, ;RETURN THE CONVERTED CHARACTER
;FLOATING POINT OUTPUT
TFLOT:
IFN FTDEC20,< ;USE "FLOUT" JSYS ON TOPS-20
IFN FTEXEC,<
SKPUSR ;IN USER MODE?
JRST TFLOTE ;NO, CAN'T USE JSYSES
> ;END IFN FTEXEC
MOVEI T1,"-" ;LOAD A MINUS SIGN IN CASE IT'S NEEDED
TLNE T,(1B0) ;IS NUMBER NEGATIVE?
PBOUT% ;YES, TYPE THE MINUS SIGN
MOVM A,T ;NO, GET POSITIVE COPY OF NUMBER
TLNN A,400 ;IS NUMBER NORMALIZED?
JRST TOC5 ;NO, TYPE AS DECIMAL INTEGER
MOVEI T1,.PRIOU ;LOAD POINTER TO TTY,THEN FLOUT BITS
MOVX T3,FLD(.FLTSP,FL%JUS)!FLD(.FLEXE,FL%EXP)!FLD(.FLPLE,FL%ESG)
!FLD(37,FL%RND)!FLD(1,FL%FST)!FLD(7,FL%SND)!FLD(4,FL%THD) ;GET FLOUT BITS
FLOUT% ;TYPE THE NUMBER
JRST ERR ;SOMETHING FAILED, PUNT
POPJ P, ;DONE
> ;END IFN FTDEC20
IFN FTDEC10!FTEXEC,< ;FLOATING OUTPUT THE HARD WAY ON TOPS-10
TFLOTE: MOVE A,T
JUMPGE A, TFLOT1
MOVNS A
MOVEI T,"-"
PUSHJ P,TOUT
TLZE A,400000
JRST FP1A
TFLOT1: TLNN A, 400
JRST TOC5 ;IF UNNORMALIZED, TYPE AS DECIMAL INTEGER
SETZ B,
CAMGE A,FT01
JRST FP4
CAML A,FT8
AOJA B,FP4
FP1A: SETZ C,
FP3: MULI A,400
ASHC B,-243(A)
SETZM TEM1 ;INIT 8 DIGIT COUNTER
SKIPE A,B ;DON'T TYPE A LEADING 0
PUSHJ P,FP7 ;PRINT INTEGER PART OF 8 DIGITS
PUSHJ P,TOC6 ;PRINT DECIMAL POINT
MOVNI A,10
ADD A,TEM1
MOVE W1,C
FP3A: MOVE T,W1
MULI T,12
PUSHJ P,FP7B
SKIPE W1
AOJL A,FP3A
POPJ P,
FP4: MOVNI C,6
SETZ W2,
FP4A: ASH W2,1
XCT FCP(B)
JRST FP4B
LDB W1,[POINT 23,FCP+1(B),35]
TXO W1,<IFIW 0>
FMPR A,@W1
IORI W2,1
FP4B: AOJN C,FP4A
PUSH P,W2 ;SAVE EXPONENT
PUSH P,FSGN(B) ;SAVE "E+" OR "E-"
PUSHJ P,FP3 ;PRINT OUT FFF.FFF PART OF NUMBER
POP P,W1 ;GET "E+" OR "E-" BACK
PUSHJ P,TEXT
POP P,A ;GET EXPONENT BACK
> ;END IFN FTDEC10!FTEXEC
FP7: IDIVI A,12 ;DECIMAL OUTPUT SUBROUTINE
MOVMS B ;MAKE POSITIVE
AOS TEM1
PUSH P,B
JUMPE A,FP7A1
PUSHJ P,FP7
FP7A1: POP P,T
FP7B: ADDI T,"0"
JRST TOUT
353473426555 ;1.0E32
266434157116 ;1.0E16
FT8: 233575360400 ;1.0E8
216470400000 ;1.0E4
207620000000 ;1.0E2
204500000000 ;1.0E1
FT: 201400000000 ;1.0E0
026637304365 ;1.0E-32
113715126246 ;1.0E-16
146527461671 ;1.0E-8
163643334273 ;1.0E-4
172507534122 ;1.0E-2
FT01: 175631463146 ;1.0E-1
IFN FTDEC10!FTEXEC,< ;CONTINUE TOPS-10 FLOATING STUFF
FT0=FT01+1
FCP: CAMLE A, FT0(C)
CAMGE A, FT(C)
Z FT0(C)
FSGN: ASCII .E-.
ASCII .E+.
> ;END IFN FTDEC10!FTEXEC
IFN FTDEC20,< ;DBL. PRECISION TYPEOUT ONLY ON TOPS-20
DFLOUT:
IFN FTEXEC,<
SKPUSR ;IN USER MODE?
JRST ERR ;NO, CAN'T DO THIS
> ;END IFN FTEXEC
PUSH P,T ;SAVE FIRST WORD
MOVE R,LLOCO ;GET ADDR. OF FIRST WORD OF NUMBER
AOS R ;INCREMENT TO NEXT WORD
PUSHJ P,FETCH ;GET IT
JRST ERR ;FAILED
MOVE T3,T ;PUT SECOND WORD IN T3
POP P,T2 ;RESTORE FIRST WORD
MOVEI T1,.PRIOU ;LOAD POINTER TO TTY,THEN FLOUT BITS
MOVX T4,FLD(.FLSPC,FL%SGN)!FLD(.FLTSP,FL%JUS)!FLD(.FLEXD,FL%EXP)!
FLD(.FLPLE,FL%ESG)!FLD(37,FL%RND)!FLD(2,FL%FST)!FLD(^D17,FL%SND)!FLD(4,FL%THD)
DFOUT% ;TYPE THE NUMBER
JRST ERR ;SOMETHING FAILED, PUNT
POPJ P, ;DONE
> ;END IFN FTDEC20
;TEXT OUTPUT SUBROUTINES
;ROUTINE TO OUTPUT TEXT A LA $NT
TEXTNT: MOVE W1,T ;FREE T FOR TOUT LOOP BELOW
MOVN W2,BYSS ;GET RIGHT-SHIFT AMOUNT
LSH T,(W2) ;DROP LOW BYTE
JUMPN T,TEXTN1 ;SKIP THIS IF NOT RIGHT-JUSTIFIED
ROT W1,(W2) ;LEFT-JUSTIFY ARGUMENT
TEXTN1: LSHC T,@BYSS ;FETCH NEXT BYTE TO TYPE
ANDI T,177 ;TOUT ONLY WANTS 7 BITS
PUSHJ P,TOUT ;OUTPUT ONE ASCII CHARACTER
JUMPN W1,TEXTN1 ;LOOP IF MORE IN WORD TO TYPE
POPJ P, ;RETURN WHEN DONE
;ROUTINE TO OUTPUT TEXT A LA $7T
TEXTT: MOVE W1,T
TEXT: TDNN W1,[-1,,777600] ;LEFT JUSTIFIED UNLESS ONLY 1 CHR.
LSH W1,35
TEXT2: SETZ T, ;7 BIT ASCII TEXT OUTPUT SUBROUTINE
LSHC T,7
PUSHJ P,TOUT
JUMPN W1,TEXT2
POPJ P,
R50PNT: LSH T,-36 ;RADIX 50 SYMBOL PRINTER
TRZ T,3
PUSHJ P,TOC
PUSHJ P,TSPC
LDB T,[POINT 32,LWT,35] ;GET SYMBOL WITHOUT FLAGS
JRST PSYM1
SIXBP: MOVNI W2,6 ;SIXBIT PRINTER
MOVE W1,LWT
SIXBP1: SETZ T,
ROTC T,6
ADDI T,40
PUSHJ P,TOUT
AOJL W2,SIXBP1
POPJ P,
;LOOKUP DDT INTERNAL ADDRESS
; TT/ ADDRESS
; PUSHJ P,DDSYMC
; RETURNS +1: FAILED TO FIND ADDRESS
; +2: FOUND,
; TT1/ PTR TO BLOCK - 1(TT1) IS PTR TO NAME STRING
; TT2/ FIRST ADDRESS OF RANGE OF INTERNAL LOCATIONS
DDSYMC: MOVE TT1,[-NDSYM,,DSYMT] ;INIT TO LOOK THRU TABLE
DDSYM1: HRRZ TT2,0(TT1) ;END OF RANGE FOR THIS SYMBOL
CAML TT,TT2 ;ADR TOO HIGH?
JRST DDSYM2 ;YES
HLRZ TT2,0(TT1) ;BEGINNING OF RANGE
CAML TT,TT2 ;ADR TOO LOW?
JRST CPOPJ1 ;RETURN GOOD
DDSYM2: ADDI TT1,1 ;STEP TO NEXT BLOCK
AOBJN TT1,DDSYM1
POPJ P, ;FAILED
;TABLE OF DDT INTERNAL LOCATIONS
DEFINE DS (NAM,FST,LST)<
FST,,LST
ASCII /NAM/>
DEFINE DSB (N)<
DS ($'N'B,BPT$B+B$SIZ*N,BPT$B+B$SIZ*N+B$SIZ)>
DSYMT: DS $M,MSK,MSK+1
DS $1M,TTYMSK,TTYMSK+1
DS $2M,SYMOFS,SYMOFS+1
DS $3M,BYTMSK,BYTMSK+1
DS $4M,BPBLK,BPBLK+1
DS $5M,SYTLOC,SYTLOC+1
DS $6M,PDFSEC,PDFSEC+1
DS $I,SAVPI,ENDPI
IFN FTPAGM,<
DS $0U,MAPPG,MAPPG+1
DS $$0U,MAPFN,MAPFN+1
DS $3U,FAKEAC,FAKEAC+1
DS $4U,ACWRD,ACWRD+1
DS $5U,FAKEAD,FAKEAD+1
DS $6U,SPTWRD,SPTWRD+1
DS $7U,CSTWRD,CSTWRD+1
DS $8U,UBASE,UBASE+1
DS $9U,UPROT,UPROT+1
DS $10U,KIPAG,KIPAG+1
DS $11U,KLPAG,KLPAG+1
DS $20U,KAFLG,KAFLG+1
DS $21U,KIFLG,KIFLG+1
DS $22U,KLFLG,KLFLG+1
DS $23U,KSFLG,KSFLG+1
> ;END IFN FTPAGM
IFE FTFILE,<
YY==10 ;SAVE RADIX
RADIX 10 ;SET TO DECIMAL FOR MACROS
ZZ==0
REPEAT NBP+1,<
DSB (\ZZ)
ZZ=ZZ+1 ;DO ALL BREAKPOINTS INCLUDING $0B
> ;END REPEAT
RADIX YY ;RESTORE RADIX
> ;END IFE FTFILE
NDSYM==<.-DSYMT>/2 ;NUMBER OF INTERNAL LOCATIONS
SUBTTL SYMBOL TABLE ROUTINES -- CHECK POINTERS
;SYMCHK -- SUBROUTINE TO CHECK OUT SYMBOL TABLE PTRS
;CALL IS:
;
; PUSHJ P,SYMCHK
; RETURN
;
;DETERMINES THE SYMBOL TABLE POINTER TO USE, AND MAKES SURE THAT ALL
;PAGES OF IT ARE ACCESSIBLE. IF PRGM IS SET ($: MODULE) IT CHECKS ITS
;VALIDITY ALSO. IF THE UNDEFINED POINTER IS NO GOOD, IT IS FIXED UP TO
;POINT TO THE END OF ONE OF THE DEFINED TABLES.
;
;USES JUST ABOUT EVERY AC
;PRESERVES W (FOR COMMAND PARSER)
SYMCHK: SKIPE SYMVAL ;HAS THIS ALREADY BEEN DONE?
POPJ P, ;YES, DON'T DO IT AGAIN
PUSH P,W ;DECSYP ET AL TRASH THIS, PARSER NEEDS IT
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;FIRST THE CASE FOR MONITORS.
IFN FTEXEC!FTMON,< ;ALL MONITORS
SYMCX0:
IFN FTDEC10,< ;TOPS-10
SKPUSR ;IF USER MODE,
SKIPN HSBLK ;OR NOT HIDING SYMBOLS
JRST SYMCU0 ;LOOK FOR SYMBOLS NORMALLY
;EXEC HIDDEN SYMBOLS, USE AS SPECIFIED
;IN S$SUB ENTRIES (SEE TTYRE7)
> ;END IFN FTDEC10
IFN FTDEC20,<
IFN FTEXEC&<^-FTEX20>,< ;EDDT, NOT KDDT
SKPEXC ;IF USER MODE,
JRST SYMCU0 ;THEN DO LIKE USER DDT
> ;END IFN FTEXEC&<^-FTEX20>
IFN FTEX20!FTMON,< ;TOPS-20 MONITOR
MOVE R,[MSEC1,,MONPDV] ;GLOBAL ADDR OF MONITOR PDV FLAG
IFN FTEX20,<
SKPUSR ;USER MODE, OR
SKPNS0 ;STILL IN SEC. ZERO?
TLZ R,-1 ;YES, SEC. 0 REFERENCE
> ;END IFN FTEX20
SKIPE R,@R ;MONITOR MIGHT HAVE A PDV
JRST SYMCP0 ;IT DOES, USE IT
> ;END IFN FTEX20!FTMON
IFN FTEX20,< ;KDDT ONLY
SKPEXC ;IF USER MODE AND NO MONPDV,
JRST SYMCU0 ; DO LIKE USER DDT
> ;END IFN FTEX20
> ;END IFN FTDEC20
MOVE R,SYMP+S$SUB ;GET ADDR OF IOWD POINTER
PUSHJ P,FETCH ;GRAB THE POINTER
SETZ T, ;SHOULDN'T HAPPEN
MOVEI W2,SYMP ;BLOCK TO SET UP
PUSHJ P,IOWBLK ;DO IT TO IT
MOVE R,USYMP+S$SUB ;SAME DEAL FOR UNDEFINEDS
PUSHJ P,FETCH ;GET POINTER
SETZ T, ;SHOULD NEVER HAPPEN
MOVEI W2,USYMP ;UNDEF BLOCK
PUSHJ P,IOWBLK ;GO INIT IT
JRST SYMCP7 ;BLAST HISEG POINTERS
> ;END IFN FTEXEC!FTMON
;HERE FOR THE USER MODES OF SYMCHK
;FALL IN FROM ABOVE
IFE FTMON,< ;NEVER DO THIS IN MDDT
SYMCU0:
IFN FTUD20,< ;USER-20 CAN
;IF WE WERE STARTED FROM THE UDDT STUB AND SOMETHING USEFUL WAS STUFFED
;INTO IT, USE IT. OTHERWISE LOOK FOR PDVS.
;NOTE THAT IF SOMETHING WAS STUFFED, $5M IS SET TO ZERO.
SKIPL R,SECUDD ;STARTED FROM UDDT STUB?
SKIPLE T,SYTLOC ;$5M CONTAINS JOBDAT SECTION OR 0?
JRST SYMCU2 ;NO, CHECK $5M
CAIE T,0 ;$5M SET TO "STUFFED"?
TSC T,R ;COMPLEMENT JOBDAT SEC WITH STUB SEC
TRNE T,-1 ;DO THEY MATCH?
JRST SYMCU2 ;NO, TRY SOMETHING ELSE
HRRI R,770001 ;YES, LOOK AT MAGIC LOCATION
PUSHJ P,FETCH ;GO GET IT
JRST SYMCU2 ;CAN'T, CHECK $5M
HRR R,T ;LOOK WHERE MAGIC LOC POINTS TO
PUSHJ P,FETCH ;GET STUFFED POINTER IF ANY
JRST SYMCU2 ;CAN'T, CHECK $5M
JUMPGE T,SYMCU2 ;IOWD STUFFED?
MOVEI W2,SYMP ;IOWD STUFFED, SET UP EVERYTHING
PUSHJ P,IOWBLK ; AS IF IT WERE A JOBDAT LOC
HRRI R,770002 ;UNDEFINED'S MAGIC LOC
PUSHJ P,FETCH ;GET IT
JRST SYMCU2 ;NO, TRY $5M
HRR R,T ;CHAIN TO REAL PLACE
PUSHJ P,FETCH ;GET REAL WORD
JRST SYMCU2 ;NO SUCH LUCK
MOVEI W2,USYMP ;MADE IT! SET UP UNDEF BLOCK
PUSHJ P,IOWBLK ;AS IF IT WERE JOBDAT
SETZM SYTLOC ;SHOW THAT WE HAVE "STUFFED" POINTERS
JRST SYMCU7 ;NOW FOR HISEG POINTER
> ;END IFN FTUD20
IFN FTUE10,<
SKIPG R,SYTLOC ;$5M SET IN 'PDV' MODE?
JRST SYMCU2 ;NO, DO IT THE OLD WAY
PUSHJ P,CHKADR ;YES, GET ITS BITS
TXNE TT,PG$HGH ;MUST BE A HISEG
TXNE TT,PG$SPY ;AND NOT A SPY-SEG
JRST SYMCU2 ;NO, DO IT THE OLD WAY
PUSHJ P,GETHSO ;YES, GET THE HISEG ORIGIN
JUMPE T,SYMCU2 ;DO IT THE OLD WAY IF NO ORIGIN
ADDI T,.JBHSM ;POINT TO ITS SYMBOL TABLE INTO
CAMN T,SYTLOC ;IF THAT'S WHAT $5M HAS, FIND THE LOWSEG ANYWAY
JRST SYMCU3 ;YES, WE'LL USE SYTLOC FOR THE HISEG LATER
JRST SYMCU2 ;NO, TRY THE OLD WAY
SYMCU1: SETZM SYTLOC ;$5M IS WRONG, DON'T USE IT
> ;END IFN FTUE10
SYMCU2: SKIPE R,SYTLOC ;$5M SET?
JRST [JUMPG R,SYMCP0 ;IF POSITIVE, PDV ADDRESS
HRLZS R ;ELSE -1,,JOBDAT-SECTION
JRST SYMCU4] ;SETUP FROM .JBSYM/ETC.
IFN FTDEC20,<JRST PDVSRH> ;NO, TRY PDVS
; -10 FALLS THRU TO SYMCU3, TO CHECK JOBDAT
;STILL IFE FTMON
;HERE TO SET UP A SECTION'S JOBDAT POINTERS
;DEFAULT TO STUB'S SECTION IF ANY, ELSE ENTRY VECTOR SECTION.
SYMCU3:
IFE FTFILE,< ;FIRST THE NON-FILDDT CASE
IFN FTDEC10,<
PUSHJ P,GEVECS ;GET ENTRY VECTOR SECTION
SETZ T, ;SECTION ZERO IF NO VECTOR
> ;END IFN FTDEC10
IFN FTDEC20,<
IFN FTUD20,< ;-20 HAS ENTRY VECTORS
SKIPL R,SECUDD ;GET STUB'S SECTION IF ANY
JRST SYMCU4 ;STUB EXISTS, USE IT
PUSHJ P,GEVECS ;GET ENTRY SECTION IN T
SETZ T, ;IF THERE'S ANYTHING IT'S IN SECT. 0
> ;END IFN FTUD20
IFE FTUD20,<MOVE T,SECDDT>;OTHERWISE DEFAULT TO DDT'S SECTION
> ;END IFN FTDEC20
HLLZ R,T ;WANT SECTION IN R
SYMCU4:
IFE FTDEC10,< ;IF NO SYMNZS,
SKPNS0 ;IN SECTION ZERO?
SETZ R, ;SET UP FOR SECTION ZERO
> ;END IFE FTDEC10
> ;END IFE FTFILE
IFN FTFILE,< ;NOW THE FILDDT CASE
HLLZ R,EVADR ;DEFAULT IS ENTRY VECTOR (OR ZERO)
SYMCU4:
> ;END IFN FTFILE
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;STILL IFE FTMON
SYMCU5:
IFN FTUE10,<SKIPG SYTLOC> ;IF NOT TRUSTING $5M FOR THE HISEG,
HLROM R,SYTLOC ;SET PROPER $5M
HRRI R,.JBSYM ;SET UP POINTERS FROM THAT SECTION
PUSHJ P,FETCH ;GET THE DEFINED POINTER
SETZ T, ;THERE AIN'T ONE
MOVEI W2,SYMP ;PRIMARY SYMBOL POINTERS BLOCK ADDRESS
JUMPG T,[PUSHJ P,PDVBL4 ;SET POINTERS FROM SYMBOL VECTOR
JRST SYMCU7] ;CHECK FOR HISEG SYMBOL TABLE
PUSHJ P,IOWBLK ;SET UP SYMBOL BLOCK
HRRI R,.JBUSY ;SAME FOR UNDEFINED POINTER
PUSHJ P,FETCH ;GET IT
SETZ T, ;MAYBE NOT
MOVEI W2,USYMP ;BLOCK TO SET UP
PUSHJ P,IOWBLK ;DO IT
SYMCU7: MOVEI R,.JBHSM ;TRY FOR HISEG TABLE
PUSHJ P,HFETCH ;IS IT THERE?
SETZ T, ;NO
MOVEI W2,HSYMP ;HISEG TABLE BLOCK
JUMPG T,[PUSHJ P,PDVBL4 ;SET POINTERS FROM SYMBOL VECTOR
JRST .+2] ;CONTINUE ONWARDS
PUSHJ P,IOWBLK ;SET IT UP
> ;END IFE FTMON
JRST SYMCV0 ;GO VERIFY THE SYMBOL TABLE POINTERS
;HERE WITH PDV ADDRESS IN R
SYMCP0: MOVEI W2,SYMP ;SYMBOL TABLE POINTERS BLOCK
PUSHJ P,PDVBLK ;EXTRACT THE SYMBOL TABLE VECTOR
SYMCP7: MOVEI W2,HSYMP ;HISEG TABLE BLOCK
SETZ R, ;ASSUME NONE
PUSHJ P,VECBLK ;CLEAR HISEG POINTERS
JRST SYMCV0 ;GO VERIFY THE SYMBOL TABLE POINTERS
;HERE TO VALIDATE SYMBOL TABLE POINTERS
SYMCV0:
IFE FTFILE,<IFN FTDEC10,<PUSHJ P,SYMNZS>> ;CHECK FOR NZS SYMBOL TABLE
IFN FTSCSH,<PUSHJ P,.CLCSH> ;WE JUST INVALIDATED IT.
MOVEI T,SYMP ;GET MAIN SYMBOL PTR
PUSHJ P,CHKSYP ;CHECK IT OUT
SETZM SYMP+S$ADR ;NO GOOD, POINT TO ZERO
MOVEI T,HSYMP ;HIGH SEG SYMBOL POINTER
PUSHJ P,CHKSYP ;CHECK OUT THE HIGH SEG PTR
SETZM HSYMP+S$ADR ;NO GOOD
;NOW SEE IF LOSEG AND HISEG POINT TO THE SAME TABLE. IGNORE HISEG IF SO.
SKIPE T,SYMP+S$ADR ;GOT A GOOD LOSEG POINTER?
SKIPN S,HSYMP+S$ADR ;AND A GOOD HISEG POINTER?
JRST SYMCV2 ;ONLY ONE, JUST USE IT
ADD T,SYMP+S$LEN ;FORM END OF LOSEG TABLE
ADD S,HSYMP+S$LEN ;FORM END OF HISEG TABLE
CAMN S,T ;POINTING TO SAME TABLES?
SETZM HSYMP+S$ADR ;YES, IGNORE HISEG POINTER
;NOW CHECK UNDEFINED FOR VALIDITY, AND FIX IT IF IT'S WRONG.
SYMCV2: MOVEI T,USYMP ;GET UNDEFINED BLOCK
PUSHJ P,CHKSYP ;CHECK IT OUT
CAIA ;NO GOOD, FIX IT UP
JRST SYMCV4 ;POINTER IS OK
SKIPN R,SYMP+S$ADR ;GOT A VALID SYMBOL TABLE?
MOVE R,HSYMP+S$ADR ;NO, USE HISEG PTR IF ANY TO FIX UNDEF PTR
MOVEM R,USYMP+S$ADR ;STORE FOR OTHERS
SETZM USYMP+S$LEN ;WITH LENGTH ZERO
MOVEI W1,USYMP ;GET UNDEF BLOCK ADR
SETZ W2, ;"UPDATE" BY ZERO WORDS
PUSHJ P,DECSYP ;GO SET .JBUSY
SETZM USYMP+S$ADR ;CAN'T, FORGET LOCATION
;FALL THROUGH TO CHECK OPEN MODULE
;HERE WHEN SYMBOL PTRS CHECKED OUT, NOW CHECK PRGM ($: PTR).
SYMCV4: SKIPN S,PRGM ;GET PTR, ONE THERE?
JRST SYMCV8 ;NO, PROCEED
JUMPGE S,SYMCV6 ;PROCEED IF S POINTS TO LOWSEG
MOVEI R,.JBHNM ;PRGM POINTS TO HISEG, GET HISEG NAME
PUSHJ P,HFETCH ; . . .
JRST SYMCV8 ;NO GOOD, CLEAR PRGM
CAME T,SEGNAM ;SAME HISEG?
JRST SYMCV8 ;NO, CLEAR PRGM
MOVEI T,HSYMP ;YES, GET THE PTR THAT PRGM POINTS INTO
CAIA
SYMCV6: MOVEI T,SYMP ;GET THE PTR THAT PRGM POINTS INTO
SKIPN S$ADR(T) ;IS THERE A TABLE?
JRST SYMCV8 ;NO, PRGM CAN'T BE VALID
TXZ S,1B0 ;CONVERT S TO OFFSET INTO TABLE
CAML S,S$LEN(T) ;PRGM INVALID UNLESS S IS WITHIN THE TABLE
JRST SYMCV8 ;INVALID
;CHECK IF PRGM POINTS TO A MODULE NAME SYMBOL
MOVE R,PRGM ;FETCH PROG SYMBOL AGAIN
SUBI R,1 ;POINT TO FIRST WORD OF PAIR
PUSHJ P,FETSYM ;GRAB SYMBOL
JRST SYMCV8 ;OOPS
TXNE T,PNAME ;INVALID UNLESS A MODULE NAME
SYMCV8: SETZM PRGM ;PRGM INVALID IN SOME WAY
SKIPN SYMP+S$ADR ;DO WE HAVE A SYMBOL TABLE?
SETZM SYMP+S$LEN ;NO, DON'T CONFUSE ANYONE
SKIPN HSYMP+S$ADR ;HOW ABOUT HISEG TABLE?
SETZM HSYMP+S$LEN ;SAME DEAL THERE
DMOVE TT,USYMP+S$ADR ;GET UNDEFINED SYMBOL PTR/LEN
DMOVEM TT,ESTUT ;INIT UNDEFINED SYM ASSEMBLER COPY
POP P,W ;RESTORE THE AC FOR THE PARSER
SETOM SYMVAL ;WE NOW KNOW ABOUT SYMBOL TABLE PTRS
IFN FTUE10,<
IFN FTEXEC,<PUSHJ P,NORSPC> ;RETURN IN CORRECT ADDRESS SPACE
XMOVEI TT,-1 ;GET CORRECT RETURN SECTION
HLLM TT,(P) ;JUST IN CASE WE LEFT S0
> ;END IFN FTUE10
POPJ P, ;RETURN FROM SYMCHK
;HERE TO WORRY ABOUT THE SYMBOL TABLE IN A NZS SECTION WHILE DDT IS
;STUCK IN SECTION ZERO.
;
;CURRENTLY, THIS CHECK SEEMS NECESSARY ONLY FOR THE -10 . . .
IFE FTFILE,< ;FILDDT HAS ITS OWN WAY OF DOING THINGS
IFN FTDEC10,<
SYMNZS: SKPS0 ;RUNNING NZS ALREADY?
POPJ P, ;YES, THEN NOT A PROBLEM BY DEFINITION
;DDT IN SECTION 0, SEE WHERE THE ASSORTED SYMBOL TABLES ARE . . .
MOVE R,SYMP+S$ADR ;STANDARD DEFINED SYMBOL TABLE (IF ANY)
IOR R,USYMP+S$ADR ;PLUS STANDARD UNDEFINED SYMBOL TABLE (IF ANY)
IOR R,HSYMP+S$ADR ;AND THE HISEG SYMBOL TABLE (IF ANY)
TLNN R,-1 ;ANY SYMBOL TABLES IN NZS SPACE?
POPJ P, ;NO, ALL SET
;MUST FINAGLE DDT INTO NZS SPACE IN ORDER TO ACCESS THE SYMBOL TABLE!
;FIRST PASS, GO FOR SECTION 1.
MOVSI R,1 ;SECTION 1
PUSHJ P,RWEMAP ;ARE WE MAPPED INTO SECTION 1?
CAIA ;NO, BE A MITE SNEAKY
JRST SYMNZ5 ;YES, GO FOR SECTION 1
;TRY FOR SYMBOL TABLE SECTION(S)
MOVE R,SYMP+S$ADR ;STANDARD SYMBOL TABLE
TLNE R,-1 ;IS THIS ONE NZS?
PUSHJ P,RWEMAP ;YES, ARE WE MAPPED INTO ITS SECTION?
CAIA ;NO TO EITHER, KEEP TRYING
JRST SYMNZ5 ;YES! JUMP TO THAT SECTION
MOVE R,HSYMP+S$ADR ;TRY THE HISEG TABLE SECTION
TLNE R,-1 ;IS THIS ONE NZS?
PUSHJ P,RWEMAP ;YES, ARE WE MAPPED INTO ITS SECTION?
CAIA ;NO TO EITHER, KEEP TRYING
JRST SYMNZ5 ;YES! JUMP TO HISEG SYMBOL SECTION
MOVE R,USYMP+S$ADR ;TRY UNDEFINED SYMBOL TABLE SECTION
TLNE R,-1 ;IS THIS ONE NZS?
PUSHJ P,RWEMAP ;YES, ARE WE MAPPED INTO ITS SECTION?
CAIA ;NO TO EITHER, BE SNEAKIER
JRST SYMNZ5 ;YES! JUMP TO UNDEFINED SYMBOL SECTION
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;LAST DITCH EFFORT, MAP SECTION 0 INTO SECTION 1
IFN FTEXEC,< ;EXEC MODE DOESN'T SUPPORT PAGE.'S
SKPUSR ;USER OR EXEC MODE?
JRST SYMNZ9 ;EXEC MODE, LOSES
> ;END IFN FTEXEC
MOVEI TT,1 ;SECTION 1
PUSHJ P,CHKSEC ;SEE WHAT SECTION 1'S STATE IS
TXNE TT,PG$SXI ;IF SECTION 1 ALREADY EXISTS
JRST SYMNZ9 ;THEN JUST GIVE IT UP (WE TRIED!)
MOVEI TT1,1 ;WANT TO MAP ONE SECTION
MOVE TT2,[PA.GMS!<0,,1>] ;NAMELY SECTION 0 INTO SECTION 1
MOVE T,[.PAGSC,,TT1] ;PAGE. ARG POINTER TO
PAGE. T, ;MAP SECTION 0 INTO SECTION 1
JRST SYMNZ8 ;OH WELL, TIME TO GIVE UP
MOVEI W1,[ASCIZ\
[DDT - Section 0 mapped into section 1 for NZS symbol table access]
\] ;INFORMATIVE TEXT
PUSHJ P,TSTRG ;TO TELL THE USER WHAT HAPPENED
MOVSI R,1 ;SECTION TO WHICH TO JUMP
;HERE TO SWITCH SECTIONS FOR NZS SYMBOL TABLE ACCESS
SYMNZ5: JSP TT,SECCHG ;GO CHANGE SECTIONS (UPDATING PDL)
HLLM TT,(P) ;FLAGS BEFORE FIRST PUSHJ ARE SUSPECT
POPJ P, ;DONE ALL WE CAN HERE . . .
;HERE WHEN CAN'T SWAP SECTIONS, CAN'T MAP SECTION 0 INTO SECTION 1
SYMNZ8: MOVEI W1,[ASCIZ\
[DDT - Can't map section 0 into section 1 for NZS symbol tables]
\] ;ERROR MESSAGE
CAIA ;TELL USER OF WOES
;HERE WHEN GIVING UP ON NZS SYMBOLS
SYMNZ9: MOVEI W1,[ASCIZ\
[DDT - Can't access NZS symbol table(s) from section 0]
\] ;ERROR MESSAGE
PUSHJ P,TSTRG ;INFORM USER OF PROBLEMS
MOVSI R,-1 ;SECTION BITS MASK
TDNE R,SYMP+S$ADR ;STANDARD SYMBOL TABLE IN NZS?
SETZM SYMP+S$ADR ;YES, PUNT IT
TDNE R,USYMP+S$ADR ;UNDEFINED SYMBOL TABLE IN NZS?
SETZM USYMP+S$ADR ;YES, PUNT IT
TDNE R,HSYMP+S$ADR ;HISEG SYMBOL TABLE IN NZS?
SETZM HSYMP+S$ADR ;YES, PUNT IT
POPJ P, ;LIMP ALONG AS BEST WE CAN
> ;END IFN FTDEC10
> ;END IFE FTFILE
;GEVECS -- RETURN ENTRY VECTOR SECTION IN T
; PUSHJ P,GEVECS
; NO ENTRY VECTOR
; ENTRY VECTOR SECTION IN T
IFN FTUE10,<
GEVECS: XMOVEI T,1(P) ;BLOCK POINTER
SETZM (T) ;FUNCTION IS READ
ENTVC. T, ;GET ENTRY VECTOR DATA
POPJ P, ;NONE TO BE HAD
SKIPN 2(P) ;IF THERE IS NO DATA,
POPJ P, ;INDICATE THAT
HLLZ T,3(P) ;RETURN THE SECTION NUMBER
JRST CPOPJ1 ;INDICATE SUCCESS
> ;END IFN FTUE10
IFN FTUD20,<
GEVECS: PUSHJ P,SAVT4 ;SAVE JSYS ACS
MOVEI T1,.FHSLF ;THIS PROCESS
XGVEC% ;GET ENTRY VECTOR
JUMPE T2,CPOPJ ;DOES ONE EXIST?
HLLZ T,T3 ;RETURN IN PROPER AC
JRST CPOPJ1 ;RETURN GOOD
> ;END IFN FTUD20
;IOWBLK -- SET UP BLOCK FROM IOWD POINTER
;CALL:
; W2/ ADR OF SYMBOL BLOCK
; R/ ADR OF ORIGINAL SYMBOL POINTER
; T/ IOWD POINTER TO SYM TABLE
; PUSHJ P,IOWBLK
; RETURN
;
;PRESERVES R,S,T,W2
IOWBLK: PUSHJ P,SAVRST ;AS ADVERTISED
IFN FTFILE,<MOVEM T,S$OPT(W2)>;SAVE ORIGINAL IOWD
HLRE S,T ;GET NEG LENGTH
MOVNM S,S$LEN(W2) ;STORE POS LENGTH
JUMPE T,IOWBL1 ;IF IT'S A REAL POINTER,
HLL T,R ;TACK ON CORRECT SECTION
IOWBL1: MOVEM T,S$ADR(W2) ;STORE TABLE ADDRESS
MOVEM R,S$SUB(W2) ;STORE ADDRESS OF POINTER
HRROS S$SUF(W2) ;FLAG S$SUB POINTS TO IOWD-FORMAT
POPJ P, ;RETURN
;HERE WITH *THE* PDVA IN R, TO CHECK OUT THE SYMBOL TABLE VECTOR
;CALL WITH ADDRESS OF SYMBOL TABLE BLOCK IN W2. IF "SYMP" THEN USYMP
;WILL BE SET, OTHERWISE UNAFFECTED.
;FLAGS IN W1 FOR SYMBOL TABLES SEEN
R5DF==1B0 ;RADIX-50 DEFINED TABLE FLAG
R5UF==1B1 ;RADIX-50 UNDEFINED TABLE FLAG
PDVBLK: MOVEM R,SYTLOC ;SAVE PDVA
SETZ W1, ;CLEAR FLAGS
IFN .PVCNT,ADDI R,.PVCNT ;GET PDV LENGTH
PUSHJ P,FETCH ;INTO T
JRST PDVS90 ;CAN'T -- DONE EARLY
CAIGE T,.PVLVR ;DOES IT HAVE A LINK VERSION?
JRST PDVBL2 ;NO, ASSUME GOOD ENOUGH
ADDI R,.PVLVR-.PVCNT ;POINT AT VERSION WORD
PUSHJ P,FETCH ;GET IT
JRST PDVBL1 ;IGNORE ERROR, ASSUME OK
LDB S,[POINT 9,T,11] ;GET MAJOR VERSION
CAIGE S,6 ;BUILT BY LINK 6.0 OR LATER?
JRST PDVS90 ;NO, .PVSYM NO GOOD
PDVBL1: SUBI R,.PVLVR-.PVSYM ;DROP BACK TO SYMBOL VECTOR WORD
JRST PDVBL3 ;AND CONTINUE
PDVBL2: CAIGE T,.PVSYM ;DOES IT HAVE A .PVSYM?
JRST PDVS90 ;NO, ZAP POINTER
ADDI R,.PVSYM-.PVCNT ;GET SYMBOL VECTOR WORD
PDVBL3: PUSHJ P,FETCH ;INTO T
JRST PDVS90 ;CAN'T
TXNE T,IFIW ;IS IT LOCAL?
HLL T,R ;YES, SET THE SECTION NUMBER
JUMPE T,PDVS90 ;NOT THERE, GIVE UP
;ENTER HERE WITH SYMBOL VECTOR ADDRESS IN T (E.G., FROM .JBSYM)
PDVBL4: SETZ W1, ;CLEAR FLAGS
MOVE R,T ;GET ADR IN RIGHT PLACE
IFN .STLEN,ADDI R,.STLEN ;WANT LENGTH WORD
PUSHJ P,FETCH ;IN T
JRST PDVS90 ;SORRY
ADD T,R ;GET LAST ADDR OF VECTOR
MOVEM T,ENDSUB ;SAVE END OF SUBTABLES
;FALL THROUGH TO LOOK AT EACH SUBTABLE
;FALL THROUGH FROM ABOVE TO CHECK EACH SUBTABLE
AOSA R ;POINT TO FIRST SUBTABLE
PDVS10: ADDI R,3 ;SUBTABLES HAVE FIXED LENGTH 3
CAML R,ENDSUB ;PAST THE END OF THE VECTOR?
JRST PDVS90 ;YES, DONE
PUSHJ P,FETCH ;GRAB TYPE WORD
JRST PDVS10 ;SIGH
LDB TT,[POINTR T,ST%TYP] ;GET JUST TYPE
CAIE TT,.R50D ;DEFINED TABLE?
JRST PDVS11 ;NO, TRY NEXT TYPE
TXOE W1,R5DF ;FLAG DEFINED TABLE SEEN
JRST PDVS10 ;ALREADY GOT ONE, THANKS
PUSHJ P,VECBLK ;SET UP BLOCK
TXZ W1,R5DF ;BLEW IT, OH WELL
JRST PDVS10 ;GO CHECK NEXT POINTER
PDVS11: CAIE TT,.R50U ;UNDEFINED TABLE?
JRST PDVS20 ;NO, SOMETHING ELSE
CAIN W2,SYMP ;UNDEFINEDS ALLOWED ONLY FROM "MASTER"
TXOE W1,R5UF ;FLAG UNDEFINED TABLE SEEN
JRST PDVS10 ;ALREADY GOT ONE, KEEP GOING
MOVEI W2,USYMP ;GET UNDEFINED BLOCK ADDR
PUSHJ P,VECBLK ;SET UP BLOCK
TXZ W1,R5UF ;NO GOOD
MOVEI W2,SYMP ;RESTORE MASTER BLOCK ADDRESS
JRST PDVS10 ;GO CHECK NEXT POINTER
PDVS20==PDVS10 ;NO MORE DEFINED TYPES
;HERE WHEN ALL SUBTABLES LOOKED AT
PDVS90: SETZ R, ;SET UP ZERO POINTER
TXNN W1,R5DF ;DEFINED TABLE SEEN?
PUSHJ P,VECBLK ;NO, CLEAR THE BLOCK
NOP
CAIE W2,SYMP ;MASTER BLOCK ADDRESS?
JRST PDVS99 ;NO, SKIP UNDEFINED CHECK
MOVEI W2,USYMP ;NEXT, UNDEFINED
TXNN W1,R5UF ;UNDEFINED TABLE SEEN?
PUSHJ P,VECBLK ;NO, POINT TO ZERO
NOP
MOVEI W2,SYMP ;RESTORE POINTER BLOCK ADDRESS
PDVS99: POPJ P, ;POINTERS SET FROM PDV/VECTOR
;VECBLK -- SET UP BLOCK BASED ON PDV SYMBOL VECTOR SUBTABLE
; W2/ ADDR OF SYMBOL BLOCK
; R/ SUBTABLE ADDRESS
; PUSHJ P,VECBLK
;RETURNS: +1/ SOMETHING DIED
; +2/ GOOD
;
;PRESERVES R,S,T,W2
VECBLK: MOVEM R,S$SUB(W2) ;SAVE SUBTABLE ADDRESS
HRRZS S$SUF(W2) ;FLAG VECTOR-SUBTABLE ADDRESS
JUMPE R,[SETZM S$ADR(W2) ;IF NO SUBTABLE, ZAP SOME
SETZM S$LEN(W2) ; LOCATIONS
IFN FTFILE,<
SETZM S$OLN(W2)
SETZM S$OPT(W2)
> ;END IFN FTFILE
JRST CPOPJ1] ;ALWAYS "SUCCEEDS"
PUSHJ P,SAVRST ;AS ADVERTISED
IFN .STDAT,ADDI R,.STDAT ;WANT LENGTH WORD
PUSHJ P,FETCH ;GRAB IT
POPJ P, ;CAN'T
IFN FTFILE,<MOVEM T,S$OLN(W2)>;SAVE ORIGINAL TYPE/LENGTH WORD
ANDX T,ST%LEN ;GET LENGTH
MOVEM T,S$LEN(W2) ;SAVE IT AWAY
ADDI R,.STPTR-.STDAT ;POINT TO POINTER
PUSHJ P,FETCH ;GET ADDRESS WORD
POPJ P, ;SORRY
IFN FTFILE,<MOVEM T,S$OPT(W2)>;SAVE ORIGINAL POINTER
TXNE T,IFIW ;IS POINTER LOCAL?
HLL T,R ;YES, MAKE A REAL ADDR
MOVEM T,S$ADR(W2) ;SAVE POINTER
JRST CPOPJ1 ;RETURN GOOD
;PDVSRH - SEARCH FOR THE RIGHT PDV TO USE.
;
;THE SEARCH ALGORITHM IS AS FOLLOWS:
;
; 1) IF NO PDVS EXIST, USE ENTRY VECTOR (OR STUB'S) SECTION'S JOBDAT.
; 2) IF ONLY ONE PDV EXISTS IN MEMORY, USE IT.
; 3) IF MORE THAN ONE PDV EXISTS, LOOK AT ALL .PVSYM WORDS FOR
; A NON-ZERO EFIW (I.E. C(.PVSYM) .GT. 0), AND TAKE THE FIRST ONE FOUND.
; 4) IF NO EFIW'S EXIST, USE FIRST PDV IN OR ABOVE THE ENTRY VECTOR SECTION.
; 5) IF NO ENTRY VECTOR OR NO SUCH PDV, USE THE FIRST PDV IN MEMORY.
;
;NOTE THAT NOT ALL PDVS WILL HAVE A .PVSYM WORD, AND THEREFORE THE
;DISTINCTION BETWEEN "PDV" AND ".PVSYM WORD" ABOVE IS SIGNIFICANT.
;
;IF THE ENTRY VECTOR IS DDT'S, WE ARE SDDT AND SHOULD USE DDT'S PDV.
;
;JUMPS TO SYMCU3 TO USE DEFAULT SECTION'S JOBDAT
;JUMPS TO SYMCP0 WHEN DECIDED ON A PDV.
IFN FTDEC20&<^-FTMON>,< ;NO PDV SEARCHING IN MDDT
PDVSRH:
IFE FTFILE,< ;FIRST THE NON-FILDDT SETUP
IFN FTUD20,< ;CHECK FOR SDDT
MOVEI T1,.FHSLF ;ARE THIS FORK'S
XGVEC% ; ENTRY VECTOR AND
XMOVEI T1,DDT ; OUR START ADDRESS
CAMN T1,T3 ; THE SAME?
JRST [ SKIPLE R,DDTPDV ;YES, GET OUR OWN PDV
JRST SYMCP0 ;GO SET UP OUR SYMBOLS
JRST .+1] ;HAVEN'T GOT ONE??
> ;END IFN FTUD20
PUSHJ P,PDVINI ;SET UP PDVARG
SETZM PDVA ;"LAST" PDVA (SET START OF RANGE)
PUSHJ P,NXTPDV ;GET PDVA IN R
IFN FTUD20,<
CAMN R,DDTPDV ;IS IT DDT'S PDV?
PUSHJ P,NXTPDV ;YES, GET ANOTHER ONE (AND NEW COUNT)
> ;END IFN FTUD20
HLRZ W1,PDVARG+.POCT2 ;GET # PDVS EXISTING
> ;END IFE FTFILE
IFN FTFILE,< ;NOW THE FILDDT SETUP
SETO W2, ;"PREVIOUS" INDEX INTO PDVTBL
PUSHJ P,NXTPDV ;GET THE FIRST PDVA
MOVE W1,PDVNUM ;GET NUMBER OF PDVS
> ;END IFN FTFILE
;FALL INTO NEXT PAGE
;STILL IFN FTDEC20&<^-FTMON>
;FALL IN FROM ABOVE
;HERE TO PICK A PDV WITH FIRST PDVA IN R, COUNT OF PDVS IN W1
JUMPLE W1,SYMCU3 ;NONE EXIST, USE SECDDT'S JOBDAT
SOJE W1,SYMCP0 ;ALL DONE IF JUST ONE PDV
PDVSR1:
IFN .PVCNT,ADDI R,.PVCNT ;WANT LENGTH WORD
PUSHJ P,FETCH ;GO GET IT
JRST PDVSR2 ;NOT THERE, SKIP IT
CAIGE T,.PVSYM ;LONG ENOUGH?
JRST PDVSR2 ;NO, SKIP IT
ADDI R,.PVSYM-.PVCNT ;POINT TO SYM WORD
PUSHJ P,FETCH ;GO GRAB IT
JRST PDVSR2 ;CAN'T
SUBI R,.PVSYM-.PVCNT ;BACK TO TOP OF PDV
JUMPG T,SYMCP0 ;USE IT IF .PVSYM IS EFIW
PDVSR2: SOJL W1,PDVSR3 ;NOT EFIW, COUNT THIS PDV
PUSHJ P,NXTPDV ;GET THE NEXT PDV
IFE FTUD20,<
JRST PDVSR1 ;AND GO LOOK AT IT
> ;END IFE FTUD20
IFN FTUD20,<
CAME R,DDTPDV ;DDT'S PDV?
JRST PDVSR1 ;NO, KEEP GOING
PUSHJ P,NXTPDV ;YES, SKIP IT
SOJA W1,PDVSR1 ;COUNT IT AND GO ON
> ;END IFN FTUD20
;STILL IFN FTDEC20&<^-FTMON>
;HERE IF NO EFIW FOUND, BASE SEARCH ON ENTRY VECTOR.
IFE FTFILE,< ;NON-FILDDT CASE
PDVSR3:
IFN FTUD20,< ;ENTRY VECTORS ONLY ON -20
SKPS0 ;IN NON-ZERO SECTION?
PUSHJ P,GEVECS ;GET ENTRY VECTOR SECTION IN T
JRST PDVSR5 ;NO ENTRY VECTOR, START AT ZERO
MOVEM T,PDVA ;START AT SECTION,,0
PUSHJ P,NXTPDV ;GRAB THE PDVA
CAMN R,DDTPDV ;IS DDT'S FIRST?
PUSHJ P,NXTPDV ;YES, TRY AGAIN
SKIPE PDVARG+.POCT2 ;DID ANY SHOW UP?
JRST SYMCP0 ;YES, GO CHECK IT OUT
> ;END IFN FTUD20
PDVSR5: SETZM PDVA ;NO, START FROM 0,,0 THIS TIME
PUSHJ P,NXTPDV ;SATISFACTION GUARANTEED
IFN FTUD20,< ;EXCEPT IN USER-20
CAMN R,DDTPDV ;DDT'S?
PUSHJ P,NXTPDV ;NOW IT SHOULD WORK...
> ;END IFN FTUD20
JRST SYMCP0 ;AND CHECK IT OUT
> ;END IFE FTFILE
IFN FTFILE,< ;FILDDT CASE
PDVSR3: SKIPE T,EVLEN ;IF THERE'S AN EVEC
HLLZ T,EVADR ;GET START OF EVEC SECTION
JUMPE T,PDVSR5 ;IF ZERO, JUST USE FIRST PDVA
MOVE W1,PDVNUM ;GET NUM PDVS
SETO W2, ;POINT TO "TOP" OF TABLE
PDVSR4: PUSHJ P,NXTPDV ;GET PDVA
CAML R,T ;CAN WE USE IT?
JRST SYMCP0 ;YEP
SOJG W1,PDVSR4 ;NO, TRY NEXT ONE
PDVSR5: SETO W2, ;NONE WORKED, JUST USE FIRST ONE
PUSHJ P,NXTPDV ;GET FIRST PDVA
JRST SYMCP0 ;GO CHECK IT OUT
> ;END IFN FTFILE
;STILL IFN FTDEC20&<^-FTMON>
;NXTPDV -- RETURNS NEXT PDVA IN SEQUENCE
;CALL:
; IFN FTFILE,<W2 CONTAINS PDVTBL INDEX OF LAST PDVA LOOKED AT>
; IFE FTFILE,<PDVA: CONTAINS LAST PDVA LOOKED AT>
; PUSHJ P,NXTPDV
;RETURNS:
; +1 WITH NEXT PDVA IN R, UPDATED W2 (FILDDT)
;USES ONLY W2 AND R
IFE FTFILE,< ;FIRST THE NON-FILDDT CASE
NXTPDV: AOS R,PDVA ;INCREMENT PAST LAST PDVA
MOVEM R,PDVARG+.POADR ;STORE AS LOW END OF RANGE
MOVEI R,1 ;ONLY 1-WORD BLOCK
MOVEM R,PDVARG+.POCT2 ;SET THE COUNT WORD
PUSHJ P,GETPDV ;DO THE PDVOP%
MOVE R,PDVA ;GET THE PDVA RETURNED
POPJ P, ;AND RETURN
;GETPDV PERFORMS A .POGET PDVOP% JSYS ACCORDING TO ARGS IN PDVARG.
GETPDV: PUSHJ P,SAVT4 ;SAVE JSYS ACS
XMOVEI T2,PDVARG ;GET ARG BLOCK ADDRESS
MOVX T1,.POGET ;GET A PDVA
PDVOP% ; . . .
POPJ P, ;RETURN
;PDVINI SETS UP PARAMETERS IN THE PDVOP% ARG BLOCK
PDVINI: MOVEI T,1 ;ONLY 1-WORD BLOCK
MOVEM T,PDVARG+.POCT2 ;SET THE COUNT WORD
XMOVEI T,PDVA ;POINT TO DATA "BLOCK"
MOVEM T,PDVARG+.PODAT ;SO PDVOP% CAN FIND IT
SETZM PDVARG+.POADR ;START RANGE AT ZERO
MOVX T,VMADR ;MAX POSSIBLE ADDRESS
SKPNS0 ;IN SECTION ZERO?
TLZ T,-1 ;YES, STAY INSIDE IT
MOVEM T,PDVARG+.POADE ;SET END OF RANGE
POPJ P, ;ALL DONE
> ;END IFE FTFILE
IFN FTFILE,<
NXTPDV: AOS W2 ;INCREMENT POINTER
MOVE R,@PDVTBL ;GET NEXT PDVA
POPJ P, ;AND RETURN
> ;END IFN FTFILE
> ;END IFN FTDEC20&<^-FTMON>
SUBTTL SYMBOL TABLE ROUTINES -- CONVERT SYMBOL TO VALUE
;EVAL -- ROUTINE TO FIND THE VALUE OF THE RADIX-50 SYMBOL IN SYM.
;EVALU -- LIKE EVAL, BUT SEARCHES THE UNDEFINED SYMBOL TABLE.
;CALL:
; <SET UP SYM>
; PUSHJ P,EVAL/EVALU
; NOT FOUND
; NORMAL RETURN
;
;CAN ALSO GO TO ERR IF SYMBOL TABLE FORMAT IS WRONG, OR MULDEF IF THE
;SYMBOL IS MULTIPLY-DEFINED.
;
;ON A NORMAL RETURN, THE ACS ARE SET UP AS FOLLOWS:
;
; T VALUE OF THE SYMBOL FOUND
; W1 SYMBOL INDEX OF SYMBOL FOUND
; W2 FLAGS OF SYMBOL FOUND
EVALU: PUSHJ P,USYSET ;SET UP TO LOOP OVER THE UNDEFINED SYMBOLS
AOJA R,EVAL1 ;LOOK AT ALL SYMBOLS, CONTINUE IN EVAL
EVAL: MOVE S,SYM ;GET SYMBOL
SETZ TT, ;INITIALIZE FOR CALLING LOKCSH
IFN FTSCSH,< ;ONLY IF USING SYMBOL TABLE CACHE
EVAL00: PUSHJ P,LOKCSH ;SEE IF IT IS IN THE CACHE
JRST EVAL0 ;NO, MUST SEARCH SYMBOL TABLE
MOVE T,SCAGE(TT) ;GET LOCAL FLAG FOR SYMBOL
TRNE T,1 ;WAS THIS AN OUTSIDE LOCAL SYMBOL?
JRST EVAL00 ;YES, SEARCH SOME MORE
MOVE T,SCVAL(TT) ;GET VALUE OF SYMBOL
TXC T,1B0 ;CHANGE TO SIGNED NUMBER
MOVE W1,SCIDX(TT) ;GET INDEX
MOVE W2,SCSYM(TT) ;AND SYMBOL NAME
JRST CPOPJ1 ;DONE
> ;END IFN FTSCSH
EVAL0: PUSHJ P,SYMSET ;SET UP TO LOOP OVER ALL SYMBOLS
SUBI R,1 ;SKIP FIRST MODULE NAME
EVAL1: TXZ F,MDLCLF!FANYSF ;NOT MULT DEFINED, HAVEN'T FOUND ANY YET
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;LOOP BACK HERE TO LOOK AT EACH NEW SYMBOL
EVAL2:
IFN FTEXEC,<
SOSGE XTYPAX ;TIME TO CHECK FOR TYPEAHEAD?
PUSHJ P,XTYPA ;YES, CHECK FOR EXEC MODE TYPEAHEAD
> ;END IFN FTEXEC
SOSGE R ;POINT TO VALUE WORD OF NEXT SYMBOL
PUSHJ P,ADVSYM ;THIS POINTER USED UP, SEE IF MORE
SKIPA T,@SYPTR ;POINTING TO A GOOD SYMBOL, GET VALUE INTO T
JRST EVAL6 ;ALL DONE, GO SEE IF ANYTHING TO RETURN
SOSGE R ;POINT TO FLAGS AND NAME FOR THIS SYMBOL
PUSHJ P,ADVSYM ;WENT OFF END OF SYMBOL WINDOW?
SKIPA W2,@SYPTR ;OK, FETCH FLAGS AND NAME
JRST ERR ;VALUE BUT NO SYMBOL? BAD FORMAT!
TXZN W2,PNAME ;PROGRAM NAME OR ZERO WORD?
JRST [ JUMPE W2,EVAL2 ;YES, IGNORE ZERO WORDS
TXO F,PNAMEF ;REMEMBER NO LONGER SEARCHING $:'D MODULE
JRST EVAL2] ;GET NEXT SYMBOL
CAME W2,SYM ;SYMBOL NAME MATCH WHAT WE'RE LOOKING FOR?
JRST EVAL2 ;NO, GET NEXT NAME
;HERE ON A MATCH. SEE IF WE SHOULD IGNORE IT, REMEMBER IT, OR RETURN IT.
MOVE W2,@SYPTR ;FETCH FLAGS AGAIN
TXNE W2,DELI ;SYMBOL DELETED FOR INPUT?
JRST EVAL2 ;YES, IGNORE IT
TXNN W2,GLOBL ;A GLOBAL SYMBOL?
TXNN F,PNAMEF ;OR A LOCAL IN THE $:'D MODULE?
JRST EVAL8 ;YES, STOP SEARCH AND RETURN IT TO CALLER
TXOE F,FANYSF ;NEED TO REMEMBER FOR LATER, FIRST TIME?
CAMN T,EVVAL ;OR SAME VALUE AS BEFORE?
JRST EVAL4 ;YES, ALL OK. REMEMBER NEW SYMBOL
TXO F,MDLCLF ;MULTIPLE MATCHES WITH DIFFERENT VALUES
JRST EVAL2 ;BUT KEEP LOOKING IN CASE WE FIND A GLOBAL
;HERE ON A MATCH WITH AN OUTSIDE LOCAL. REMEMBER IT, THEN KEEP LOOKING.
EVAL4: MOVEM W2,EVFLG ;REMEMBER FLAGS
MOVEM T,EVVAL ;REMEMBER VALUE
ADD R,R2IDX ;CONVERT R TO SYMBOL INDEX
MOVEM R,EVIDX ;SAVE SYMBOL INDEX OF TENTATIVE MATCH
SUB R,R2IDX ;PUT R BACK AS IT WAS
JRST EVAL2 ;KEEP LOOKING IN CASE WE FIND A GLOBAL
;HERE WHEN THE SEARCH IS ALL FINISHED. WE DIDN'T FIND A GLOBAL OR A
;LOCAL IN THE OPEN MODULE, SO SEE IF WE FOUND SOMETHING USEFUL ELSEWHERE.
EVAL6: TXNN F,FANYSF ;FIND ANYTHING?
POPJ P, ;NO, JUST GIVE AN ERROR
TXNE F,MDLCLF ;WAS WHAT WE FOUND UNIQUE?
JRST MULDEF ;NO, GO GIVE "M" ERROR
MOVE W1,EVIDX ;YES, SET IT UP IN RETURN ACS
MOVE W2,EVFLG ; . . .
MOVE T,EVVAL ; . . .
JRST CPOPJ1 ;RETURN OUTSIDE LOCAL TO CALLER
;HERE WHEN WE HAVE A MATCHING GLOBAL OR LOCAL IN THE OPEN MODULE.
;STOP THE SEARCH IMMEDIATELY AND RETURN THE VALUE TO THE CALLER.
EVAL8: MOVE W1,R2IDX ;T AND W2 SET UP, BUT NEED TO PUT INDEX IN W1
ADD W1,R ;CONVERT R TO SYMBOL INDEX IN W1
JRST CPOPJ1 ;RETURN GLOBAL OR INSIDE LOCAL TO CALLER
SUBTTL SYMBOL TABLE ROUTINES -- CONVERT VALUE TO SYMBOL
;THE SYMBOL TABLE CACHE ALGORITHMS:
;
;
;TO SPEED UP THE EXEC MODE DDTS (EXPECIALLY TOP-20 WITH HIDDEN SYMBOLS),
;A NEW SYMBOL TABLE CACHE EXISTS. ENTRIES ARE ADDED DYNAMICALLY AS
;DDT SEARCHES FOR THE PROPER SYMBOLS FOR TYPEOUT. SYMBOLS WHICH ARE
;TYPED INTO DDT DO NOT GET ADDED TO CACHE SINCE THAT WOULD INTRODUCE SOME
;OBSCURE BUGS IN SYMBOL TYPEOUT. BUT THE CACHE IS SEARCHED ON TYPEIN IN
;CASE WE ARE LUCKY AND THE SYMBOL IS ALREADY THERE. CARE MUST BE TAKEN
;THOUGH, SINCE ONLY LOCAL OR GLOBAL SYMBOLS ARE VALID FOR TYPEIN.
;
;THE CACHE REMEMBERS SYMBOL NAMES, ALONG WITH THEIR VALUE. BUT MOST
;IMPORTANTLY, THE RANGE OF A SYMBOL IS ALSO REMEMBERED, AND THE SYMBOL
;TABLE LOOKUP CODE WILL FIND THE RANGE FOR ANY SYMBOL IT RETURNS. THIS
;MAKES THE CACHE EXTREMELY GOOD, SINCE THOUSANDS OF VALUES MIGHT BE
;ASSOCIATED WITH A SINGLE SYMBOL NAME. ALONG WITH THE VALUE AND RANGE,
;THE SYMBOL TABLE INDEX, THE AGE OF THE SYMBOL, AND THE "SYMBOL IS LOCAL"
;FLAG IS REMEMBERED (SO THAT SYMBOLS WILL TYPE "#" PROPERLY). EVERY
;REFERENCE TO A SYMBOL UPDATES ITS AGE. IF THE CACHE IS FULL, THEN
;THE OLDEST SYMBOL IS DELETED TO MAKE ROOM FOR THE NEW SYMBOL. THE
;AGE VALUE FOR A SYMBOL IS SHIFTED LEFT 3 BITS, TO MAKE ROOM FOR THE
;"#" FLAG. THIS DOES NOT AFFECT COMPARISONS OF THE AGES.
;
;THE RANGE OF A SYMBOL MIGHT NOT BE KNOWN TOTALLY IN ALL CASES.
;THIS CAN OCCUR DUE TO THE DELETION OF ANOTHER SYMBOL WHICH PREVIOUSLY
;RESTRICTED THE RANGE OF A SYMBOL. OR THE SYMBOL MIGHT BE GLOBAL OR BE
;IN THE LOCAL MODULE. IN SUCH A CASE, SINCE THE SYMBOL TABLE SEARCHING
;CODE STOPS EARLY, THE RANGE IS KNOWN ONLY TO THE VALUE SEARCHED FOR.
;IF EVER THE RANGE NEEDS EXTENDING, THE CACHE LOGIC WILL DO THIS.
;
;NOTICE THAT THE SYMBOL CACHE WILL ONLY CONTAIN A SINGLE ENTRY FOR
;ANY PARTICULAR VALUE, BUT CAN CONTAIN MULTIPLE ENTRIES FOR A PARTICULAR
;SYMBOL NAME. THIS IS BECAUSE A NON-LOCAL SYMBOL MAY BE DEFINED TO HAVE
;DIFFERENT VALUES IN TWO SEPARATE MODULES, AND YET EACH SYMBOL IS THE
;BEST ONE TO USE FOR SOME RANGE OF NUMBERS.
;THE VALUE OF A SYMBOL STORED IN THE CACHE IS IN UNSIGNED FORMAT. THIS
;MEANS THAT BIT ZERO IS COMPLEMENTED. THE PURPOSE OF THIS IS SO THAT
;A SYMBOL RANGE WHICH CROSSES THE 0 AND 400000000000 BOUNDARIES WORKS
;PROPERLY. COMPLEMENTING THE SIGN BIT ORDERS ALL VALUES SO THAT ZERO
;IS LOWEST, UP THROUGH 377777,,-1, TO 400000,,0 AND UP TO -1,,-1.
;THIS IS THE PREFERED ORDER, SINCE THEN ZERO WILL NEVER BE FOO+N, AND
;A VALUE OF 400000,,0 WILL PROPERLY TYPE OUT AS FOO+N.
;
;ENTRIES IN THE CACHE HAVE TO BE DELETED AT THE PROPER TIME. WHENEVER
;A SYMBOL IS REDEFINED, THE CACHE HAS TO BE CLEARED OF BOTH THE SYMBOL
;NAME, AND ALSO OF THE NEW VALUE. OTHERWISE, WRONG TYPEOUT WILL RESULT.
;THIS HAPPENS EXPLICITLY FOR A SYMBOL WHEN YOU GO SYMBOL:, OR IMPLICITLY
;WHEN YOU USE THE PATCHING FEATURE. THE CACHE HAS TO BE CLEARED TOTALLY
;WHENEVER THE PROGRAM MODULE IS CHANGED, SINCE ALL NON-EXACT SYMBOLS CAN
;NOW BE WRONG. THIS FEATURE CAN BE USED TO CLEAR THE CACHE AT ANY TIME,
;IN CASE YOU THINK THAT THE CACHE CONTAINS WRONG DATA.
;
;ALL OF THE SYMBOL NAMES WHICH ARE USED IN THE CACHE LOGIC HAVE THE
;FORM OF SC???.
;LOOK -- ROUTINE TO FIND A NAME FOR THE VALUE IN T.
;CALL:
; MOVE T,<VALUE>
; PUSHJ P,LOOK
; NOTHING USEFUL FOUND
; SOMETHING, BUT NO EXACT MATCH
; EXACT MATCH FOUND AND TYPED
;
;
;THIS ROUTINE RETURNS THE FOLLOWING (ON WHICH RETURNS):
;
; T ORIGINAL VALUE (ALL)
; W VALUE OF SYMBOL FOUND (+2,+3)
; W2 SYMBOL FOUND (+2,+3)
; S DIFFERENCE, T-W (+2)
;
;NOTE THAT THE COMPUTATIONS DONE BY THIS ROUTINE USE UNSIGNED INTEGERS,
;WHICH HAVE BIT 0 COMPLEMENTED. THE SYMBOL VALUES STORED IN THE CACHE
;ARE OF THIS FORMAT ALSO.
LOOK: JUMPE T,CPOPJ ;NEVER FIND 0-VALUE SYMBOL
TXC T,1B0 ;CONVERT TO UNSIGNED FORMAT
TXZ F,MDLCLF ;INITIALIZE FLAG
IFN FTSCSH,< ;ONLY IF USING SYMBOL TABLE CACHE
HRLOI W1,377777 ;SET UP INFINITE AGE
HRLZ TT,SCNUM ;GET NUMBER OF SYMBOLS NOW IN CACHE
JUMPE TT,CSHEMP ;SKIP SOME IF CACHE IS EMPTY
MOVN TT,TT ;CONVERT TO AN AOBJN POINTER
SRCCSH: CAMG W1,SCAGE(TT) ;THIS ENTRY OLDER THAN PREVIOUS ONES?
JRST SRCCH1 ;NO
MOVE W1,SCAGE(TT) ;YES, REMEMBER ITS AGE
HRRZ W2,TT ;AND THE INDEX OF IT
SRCCH1: CAML T,SCVAL(TT) ;VALUE LESS THAN THIS SYMBOL?
CAMLE T,SCMAX(TT) ;OR GREATER THAN MAXIMUM VALUE FOR SYMBOL?
AOBJN TT,SRCCSH ;YES, LOOK AT NEXT SYMBOL IN CACHE
JUMPL TT,[MOVE TT1,SCAGE(TT) ;IF FOUND SYMBOL, GET FLAGS
TRNE TT1,1 ;SEE IF SHOULD HAVE # AFTER IT
TXO F,MDLCLF ;YES, REMEMBER THAT
JRST LOOKDN] ;PROCEED
CAIL TT,SCSIZ ;IS THE CACHE FILLED UP?
MOVE TT,W2 ;YES, THEN WE'LL REPLACE THE OLDEST SYMBOL
CSHEMP: MOVEM TT,SCTMP ;REMEMBER INDEX WE MIGHT REPLACE
PUSHJ P,LOKSYM ;SEARCH SYMBOL TABLE FOR A SYMBOL
MOVE S,W2 ;MOVE FOUND SYMBOL TO RIGHT AC
SETZ TT, ;INITIALIZE FOR LOOP
CSHEM1: PUSHJ P,LOKCSH ;SEE IF HAVE THE SYMBOL IN THE CACHE
JRST NEWSCH ;NO, HAVE TO INSERT IT
CAME W,SCVAL(TT) ;FOUND THE RIGHT ENTRY FOR THIS SYMBOL?
JRST CSHEM1 ;NO, LOOK SOME MORE
CAMLE R,SCMAX(TT) ;YES, SEE IF MAXIMUM CAN BE RAISED
MOVEM R,SCMAX(TT) ;YES, RAISE IT
JRST LOOKDN ;GO FINISH UP
;STILL IFN FTSCSH
NEWSCH: TXZ W2,74B5 ;CLEAR SYMBOL FLAGS
MOVE TT,SCTMP ;GET BACK INDEX TO USE IN CACHE
MOVEM W2,SCSYM(TT) ;REMEMBER THE SYMBOL NAME
MOVEM W1,SCIDX(TT) ;REMEMBER ITS INDEX
MOVEM W,SCVAL(TT) ;AND ITS VALUE
MOVEM R,SCMAX(TT) ;SET MAXIMUM KNOWN VALUE FOR SYMBOL TOO
HRRZ TT1,TT ;GET INDEX WITHOUT JUNK IN LEFT HALF
CAMN TT1,SCNUM ;INSERTED A NEW ENTRY IN THE CACHE?
AOS SCNUM ;YES, INCREMENT SYMBOL COUNT
LOOKDN: AOS TT1,SCTIM ;INCREMENT AGE TIMER
LSH TT1,3 ;MAKE ROOM FOR FLAGS
TXNE F,MDLCLF ;WAS THIS SYMBOL FOUND OUTSIDE LOCAL MODULE?
IORI TT1,1 ;YES, REMEMBER THAT
MOVEM TT1,SCAGE(TT) ;SET NEW AGE FOR THIS SYMBOL
MOVE W2,SCSYM(TT) ;GET SYMBOL NAME WE FOUND
MOVE W1,SCIDX(TT) ;GET INDEX OF THIS SYMBOL
MOVE W,SCVAL(TT) ;AND THE VALUE OF THE SYMBOL
> ;END IFN FTSCSH
IFE FTSCSH,< ;IF NOT USING SYMBOL TABLE CACHE
PUSHJ P,LOKSYM ;LOOKUP IN REGULAR SYMBOL TABLE
> ;END IFE FTSCSH
TXC W,1B0 ;CONVERT BACK TO SIGNED NUMBERS
TXC T,1B0 ;FROM UNSIGNED
MOVE S,T ;COMPUTE DIFFERENCE BETWEEN VALUES
XOR T,W ;TEMPORARILY TRASH T TO COMPARE SIGNS
JUMPGE T,LOOKD1 ;EASY CASE IF SIGNS THE SAME
TXC S,1B0 ;HARD CASE--MAKE SIGNS THE SAME
SUB S,W ;NOW SUB IS SAFE
TXCA S,1B0 ;FIX UP THE RESULT
LOOKD1: SUB S,W ;NORMAL SUB WORKS IF SIGNS THE SAME
XOR T,W ;RESTORE T
JUMPE W2,CPOPJ ;ALWAYS IGNORE A NULL SYMBOL
JUMPN S,CPOPJ1 ;IF NOT EXACT, GIVE SINGLE SKIP
PUSHJ P,PSYM0 ;PRINT AND REMEMBER FOR $D
TXNE F,MDLCLF ;IS IT NOT AMBIGUOUS?
TXNE F,OKAF ;OR IS IT OK TO BE SO?
JRST CPOPJ2 ;YES, DON'T TYPE SOMETHING
PUSH P,T ;SAVE T
MOVEI T,"#" ;FLAG POSSIBLY AMBIGUOUS
PUSHJ P,TOUT ;TYPE THE #
POP P,T ;RESTORE AC
CPOPJ2: AOS (P) ;DOUBLE SKIP RETURN
CPOPJ1: AOS (P) ;SINGLE SKIP RETURN
CPOPJ: POPJ P, ;RETURN
IFN FTSCSH,< ;ONLY IF USING SYMBOL TABLE CACHE
;SUBROUTINE TO SEARCH FOR A SYMBOL NAME IN THE SYMBOL CACHE. CALL:
;
; SETZ TT, ;(FIRST CALL ONLY) INITIALIZE FOR LOOP
; MOVE S,SYMBOL ;GET SYMBOL
; PUSHJ P,LOKCSH ;SEARCH CACHE FOR IT
; (NOT FOUND RETURN) ;NOT THERE
; (FOUND RETURN) ;FOUND IT, INDEX INTO CACHE IN TT
;
;EACH SUCCESSIVE CALL WITHOUT DESTROYING AC TT WILL RETURN THE NEXT
;OCCURANCE OF THE SPECIFIED SYMBOL IN THE CACHE. ONLY USES AC'S S AND TT.
LOKCSH: JUMPL TT,LOKCS1 ;GO ON IF JUST CONTINUING SEARCH
TXZ S,74B5 ;CLEAR FLAG BITS FROM SYMBOL
HRLZ TT,SCNUM ;GET NUMBER OF SYMBOLS IN CACHE
JUMPE TT,CPOPJ ;QUIT IF NO SYMBOLS IN CACHE
MOVN TT,TT ;MAKE INTO AOBJN POINTER
CAME S,SCSYM(TT) ;IS THIS THE SYMBOL?
LOKCS1: AOBJN TT,.-1 ;NO, SEARCH SOME MORE
JUMPL TT,CPOPJ1 ;SKIP RETURN IF FOUND IT
POPJ P, ;OTHERWISE NON-SKIP
;SUBROUTINE TO CLEAR THE SYMBOL TABLE CACHE. CACHE IS INITIALIZED WHEN
;DDT IS ENTERED, MODULE NAME IS CHANGED, NEW SYMBOL IS DEFINED, ETC.
;NO AC'S ARE USED. TO MAKE DEBUGGING FASTER, EXEC-MODE DDTS WILL NOT
;CLEAR THE CACHE WHENEVER CONTROL RETURNS TO DDT (SUCH AS A BREAKPOINT).
;LOCATION .CLCSH CAN BE PATCHED TO DO SO IF THE PROBLEM CHANGES THE
;SYMBOL TABLE, AND THE CACHE CODE HAS TO BE "RIGHT". SIMILARLY, IF THE
;SYMBOL TABLE ISN'T BEING MESSED UP IN USER MODE, .CLCSH CAN BE PATCHED
;TO MAKE DEBUGGING FASTER THERE TOO.
.CLCSH: IFN FTEXEC!FTMON!FTEX20,<POPJ P,> ;HERE FOR EXEC DDTS
IFE FTEXEC!FTMON!FTEX20,<JFCL> ;ALL OTHER DDTS
CLRCSH: SETZM SCNUM ;CLEAR NUMBER OF SYMBOLS IN CACHE
SETZM SCTIM ;RESET AGE TIMER
POPJ P, ;DONE
;STILL IFN FTSCSH
;SUBROUTINES TO FIND AN ENTRY IN THE CACHE AND REMOVE IT. CALL
;DELCSH WITH SYMBOL NAME IN S, OR CALL DELCSV WITH THE VALUE OF
;A SYMBOL (NORMAL FORMAT) IN S.
DELCSV: HRLZ TT,SCNUM ;GET NUMBER OF SYMBOLS
JUMPE TT,CPOPJ ;IF NONE, DONE
MOVN TT,TT ;MAKE AN AOBJN POINTER
TXC S,1B0 ;TURN INTO UNSIGNED FORMAT FOR COMPARES
CAML S,SCVAL(TT) ;THIS SYMBOL VALUE TOO SMALL?
CAMLE S,SCMAX(TT) ;OR TOO LARGE?
AOBJN TT,.-2 ;YES, TRY NEXT ENTRY
JUMPL TT,CSHREM ;JUMP IF FOUND SYMBOL TO DELETE
POPJ P, ;NOT FOUND, DONE
DELCSH: SETZ TT, ;BEGIN AT THE BEGINNING
PUSHJ P,LOKCSH ;FIND THE SYMBOL IN THE CACHE
POPJ P, ;NOT THERE, SO ALL DONE
PUSHJ P,CSHREM ;REMOVE THE ENTRY
JRST DELCSH ;LOOK FOR ANOTHER OCCURANCE
CSHREM: SOS TT1,SCNUM ;DECREMENT NUMBER OF ENTRIES IN CACHE
MOVE TT2,SCSYM(TT1) ;GET SYMBOL AT END
MOVEM TT2,SCSYM(TT) ;WRITE OVER DELETED SYMBOL
MOVE TT2,SCIDX(TT1) ;GET INDEX
MOVEM TT2,SCIDX(TT) ;WRITE OVER OLD INDEX
MOVE TT2,SCVAL(TT1) ;GET VALUE
MOVEM TT2,SCVAL(TT) ;WRITE OVER VALUE
MOVE TT2,SCMAX(TT1) ;GET MAXIMUM VALUE
MOVEM TT2,SCMAX(TT) ;REPLACE IT TOO
MOVE TT2,SCAGE(TT1) ;FINALLY GET AGE
MOVEM TT2,SCAGE(TT) ;REPLACE IT
POPJ P, ;DONE
> ;END IFN FTSCSH
SUBTTL NON-CACHE ROUTINE TO CONVERT A VALUE TO A SYMBOL
;THIS ROUTINE SEARCHES THE NORMAL SYMBOL TABLE FOR THE SPECIFIED VALUE,
;AND RETURNS THE APPROPRIATE SYMBOL FOR THAT VALUE. CALL:
;
; MOVE T,VALUE
; PUSHJ P,LOKSYM
; (RETURN)
;
;WITH: W2/ SYMBOL WHICH WAS FOUND. ZERO IF NONE.
; W1/ SYMBOL INDEX OF SYMBOL IN W2.
; W/ VALUE OF THE FOUND SYMBOL.
; R/ HIGHEST VALUE THE FOUND SYMBOL IS USEFUL FOR IN TYPEOUT.
; T/ NOT CHANGED.
;
;ALL VALUES IN THIS ROUTINE ARE IN UNSIGNED FORMAT (BIT 0 IS COMPLEMENTED).
LOKSYM: PUSH P,T ;SAVE SOUGHT VALUE OVER SYMSET
HRLOI T,377777 ;GET INFINITY AS A BOUND
MOVEM T,LKMAX ;INITIALIZE VALUE SYMBOL IS GOOD FOR
PUSHJ P,SYMSET ;SET UP TO LOOP OVER ALL SYMBOLS
POP P,T ;RESTORE T
SUBI R,1 ;SKIP FIRST MODULE NAME
TXZ F,FANYSF ;HAVEN'T FOUND ANYTHING YET
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;LOOP BACK HERE TO LOOK AT EACH NEW SYMBOL.
LOOK2:
IFN FTEXEC,<
SOSGE XTYPAX ;TIME TO CHECK FOR TYPEAHEAD?
PUSHJ P,XTYPA ;YES, CHECK FOR EXEC MODE TYPEAHEAD
> ;END IFN FTEXEC
SOSGE R ;ANY MORE SYMBOLS TO LOOK AT?
PUSHJ P,ADVSYM ;MAYBE NOT, GO SEE
SKIPA W,@SYPTR ;GOT ANOTHER ONE, GET ITS VALUE INTO W
JRST LOOK10 ;ALL DONE, GO SEE IF ANYTHING TO RETURN
TXC W,1B0 ;CONVERT TO UNSIGNED FORMAT
SOSGE R ;BACK UP TO NAME WORD
PUSHJ P,ADVSYM ;HAPPENS ONLY IF WINDOWING
SKIPA W2,@SYPTR ;FETCH THE NAME
JRST ERR ;NO NAME?? BAD FORMAT!
TXNN W2,PNAME ;IS THIS A PROG NAME OR ZERO WORD?
JRST [ JUMPE W2,LOOK2 ;IGNORE ZERO WORDS
TXO F,PNAMEF ;REMEMBER NO LONGER IN $:'D MODULE
JRST LOOK2] ;GET NEXT SYMBOL
TXNN W2,DELI!DELO ;IS SYMBOL DELETED?
TXNN W2,-1-PNAME ;OR IS IT BLANK?
JRST LOOK2 ;YES, DON'T CONSIDER IT
CAMLE W,T ;ONLY CONSIDER SYMS .LE. WHAT WE'RE LOOKING FOR
SOJA W,[CAMGE W,LKMAX ;VALUE OF SYMBOL LESS THAN OLD MAX?
MOVEM W,LKMAX ;YES, REDUCE VALIDITY OF SYMBOL
JRST LOOK2] ;CONTINUE LOOKING
TXNN W2,GLOBL ;IS THIS A GLOBAL SYMBOL?
TXNN F,PNAMEF ;OR A LOCAL IN THE OPEN MODULE?
JRST LOOK4 ;YES, SEE IF WE CAN RETURN IT IMMEDIATELY
CAMGE T,[400000,,000020] ;IN AC RANGE?
JRST LOOK2 ;YES, IGNORE OUTSIDE LOCALS
TXO F,OLF ;REMEMBER LAST SYMBOL SAVED WAS OUTSIDE LOCAL
JRST LOOK6 ;SAVE THE SYMBOL IN CASE BEST EVER FOUND
;HERE WHEN A GLOBAL OR INSIDE LOCAL IS CLOSE ENOUGH. IF IT MATCHES EXACTLY,
;THEN STOP THE SEARCH AND RETURN IT IMMEDIATELY. IF NOT, SAVE IT IN CASE
;WE NEVER FIND AN EXACT MATCH, THEN CONTINUE SEARCHING.
LOOK4: TXZ F,OLF ;REMEMBER NOT AN OUTSIDE LOCAL
CAME W,T ;EXACT MATCH?
JRST LOOK6 ;NO, JUST GO REMEMBER IT
MOVE W1,R2IDX ;YES, WANT TO RETURN SYMBOL INDEX IN W1
ADD W1,R ;FORM INDEX
TXZ F,MDLCLF ;REMEMBER NOT AN OUTSIDE LOCAL
MOVE R,T ;ONLY KNOW SYMBOL IS GOOD FOR GIVEN VALUE
POPJ P, ;RETURN
;HERE WHEN WE HAVE A POSSIBLE MATCH. IF A BETTER OUTSIDE LOCAL OR A
;GLOBAL OR INSIDE LOCAL AT LEAST AS GOOD AS THE SYMBOL ALREADY SAVED
;(IF ANY), SAVE IT IN CASE IT'S THE BEST EVER FOUND. MDLCLF IS USED
;TO REMEMBER WHETHER WHAT WE HAVE SAVED IS AN OUTSIDE LOCAL OR NOT.
LOOK6: TXON F,FANYSF ;IS THIS THE FIRST SYMBOL?
JRST LOOK8 ;YES, JUST GO SQUIRREL IT AWAY
CAMGE W,LKVAL ;IS OUR NEW SYMBOL AS GOOD?
JRST LOOK2 ;NO, DON'T WASTE ANY MORE TIME
CAME W,LKVAL ;IS OUR NEW SYMBOL DEFINITELY BETTER?
JRST LOOK8 ;YES, USE IT
TXNN F,OLF ;IF NEW SYMBOL IS OUTSIDE LOCAL,
TXNN F,MDLCLF ; OR OLD SYMBOL IS GLOBAL/INSIDE LOCAL,
JRST LOOK2 ; DON'T STOMP ON IT
;HERE TO SAVE THE CURRENT SYMBOL.
LOOK8: TXNN F,OLF ;IS THIS SYMBOL AN OUTSIDE LOCAL?
TXZA F,MDLCLF ;NO, REMEMBER THAT
TXO F,MDLCLF ;YES, REMEMBER THAT
MOVEM W,LKVAL ;SAVE VALUE
MOVEM W2,LKFLG ;SAVE FLAGS
ADD R,R2IDX ;FORM SYMBOL INDEX
MOVEM R,LKIDX ;SAVE THAT TOO
SUB R,R2IDX ;AS BEFORE
JRST LOOK2 ;RESUME THE SEARCH
;HERE WHEN WE HAVE SEARCHED THE ENTIRE SYMBOL TABLE. RETURN THE BEST
;SYMBOL WE FOUND, IF ANY.
LOOK10: MOVE R,LKMAX ;GET HIGHEST VALUE THAT SYMBOL IS GOOD FOR
TXNN F,FANYSF ;FIND ANYTHING?
JRST [ SETZ W2, ;NO, CLEAR SYMBOL NAME
MOVX W,1B0 ;AND GET VALUE OF MINUS INFINITY
POPJ P,] ;RETURN
MOVE S,T ;YES, FIGURE OUT HOW FAR OFF IT WAS
;GET OFFSET INTO S
XOR T,LKVAL ;TEMPORARILY TRASH T TO COMPARE SIGNS
JUMPGE T,LOOK11 ;EASY CASE IF SIGNS THE SAME
TXC S,1B0 ;HARD CASE--MAKE SIGNS THE SAME
SUB S,LKVAL ;NOW SUB IS SAFE
TXCA S,1B0 ;FIX UP THE RESULT
LOOK11: SUB S,LKVAL ;NORMAL SUB WORKS IF SIGNS THE SAME
XOR T,LKVAL ;RESTORE T
MOVE W,LKVAL ;PUT VALUE INTO W FOR RETURN
MOVE W1,LKIDX ;INDEX INTO W1
MOVE W2,LKFLG ;FLAGS INTO W2
POPJ P, ;RETURN
SUBTTL SYMBOL TABLE ROUTINES -- HARDWARE OPCODE PROCESSING
;DESCRIPTION OF OP DECODER FOR DDT:
;
; THE ENTIRE INSTRUCTION SET FOR THE PDP-6 CAN BE COMPACTED INTO
;A SPACE MUCH SMALLER THAN ONE REGISTER FOR EVERY SYMBOL. THIS OCCURS
;BECAUSE OF THE MACHINE ORGANIZATION AND INSTRUCTION MNEMONICS CHOSEN
;FOR THE PDP-6. FOR EXAMPLE, IF BITS (0-2) OF AN INSTRUCTION EQUAL
;101(2) THE INSTRUCTION IS A HALF WORD INSTRUCTION AND AN "H" MAY
;BE ASSUMED. "T" MAY BE ASSUMED FOR ALL TEST INSTRUCTIONS (WHICH
;BEGIN WITH 110(2).
;
; THE TABLE TBL IN DDT CONSISTS OF 9 BIT BYTES, 4 TO A WORD.
;THE NUMBERS IN THE BYTES HAVE THE FOLLOWING SIGNIFICANCE:
;0-37(8): THIS IS A DISPATCH COMMAND FOR THE OP-DECODER INTERPRETER.
; LET THE RIGHT MOST TWO BITS EQUAL N; LET THE NEXT 3 BITS
; EQUAL P.
;
; THE CONTENTS OF INST (INSTRUCTION) CONTAIN IN THE RIGHT
; MOST NINE BITS THE BINARY FOR THE MACHINE INSTRUCTION.
; P AND N REFER TO THE CONTENTS OF INST, AND THE OP DECODER
; WILL PRODUCE AN ANSWER D GIVEN P, N, AND THE CONTENTS
; OF INSTX N+1 GIVES THE NUMBER OF BITS IN INST; P GIVES THE
; POSITION (FROM THE RIGHT EDGE) OF THE N+1 BITS.
;
; EXAMPLE: P = 6
; N = 2
;
; C(INST) = .010 101 100(2)
;
; THE RESULT = D = 010(2) = 2(8)
;
; D IS USED AS A DISPATCH ON THE NEXT BYTES IN THE TABLE.
; IF D = 5, 5 BYTES IN THE TABLE (DON'T COUNT THE BYTES WHICH
; PRINT TEXT OR ARE THE EXTEND BYTE, 41-73(8))
; ARE SKIPPED OVER AND THE 6TH BYTE RESUMES
; THE INTERPRETATION.
;
;40(8) THIS IS A STOP CODE; WHEN THIS IS REACHED INTERPRETATION
; IS FINISHED.
;41(8)-72(8) THE ALPHABET IS ENCODED INTO THIS RANGE.
; 41- A
; 42- B
; 72- Z
; WHEN A BYTE IN THIS RANGE IS REACHED, ITS CORRESPONDING
; LETTER IS TYPED.
;73(8) THIS IS THE "EXTEND" BYTE. THE NEXT BYTE IN THE TABLE
; IS A TRANSFER BYTE BUT MUST HAVE THE ADDRESS EXTENDED
; BY <1000-74*2+FIR.> FIRST.
;
;74(8)-777(8) THIS IS A TRANSFER BYTE. IF THE BYTE IN THIS RANGE IS
; CONSIDERED TO BE A, TRANSFER INTERPRETATION TO THE
; <A-74(8)+FIR.>RD BYTE IN THE TABLE.
;
;MACROS ASSEMBLE THE TABLE TBL:
; 1. A NUMBER FOLLOWED BY ^ ASSEMBLES A DISPATCH BYTE. THE FIRST
; DIGIT IS THE POSITION; THE SECOND DIGIT IS THE SIZE.
; 2. A POINT (.) ASSEMBLES A STOP CODE.
; 3. A NAME FOLLOWED BY A SLASH ASSEMBLES A TRANSFER TO THE
; SYMBOLICALLY NAMED BYTE.
; 4. A STRING OF LETTERS TERMINATED BY A SPACE, COMMA, OR POINT,
; ASSEMBLE INTO A STRING OF BYTES, EACH BYTE BEING ONE LETTER.
;
;EXAMPLE OF BINARY TO SYMBOLIC DECODING:
; THE MACHINE CODE FOR JRST IS 254
; INST 0 1 0 1 0 1 1 0 0
; THE INTERPRETER STARTS WITH THE FIRST BYTE IN THE TABLE (63^).
; THE RESULT OF APPLYING THIS TO C(INST) GIVES 2. SKIPPING OVER
; 2 BYTES IN THE TABLE AND INTERPRETING THE THIRD RESULTS IN
; HAK/ BEING INTERPRETED. AT HAK:, THERE IS A 33^. APPLYING
; THIS TO C(INST) RESULTS IN 5 NON PRINTING BYTES BEING SKIPPED
; OVER:
; 1. MV/
; MOV PRINTING TEXT
; 2. MO/
; 3. ML/
; 4. DV/
; 5. SH/
;
;H1/ IS THE NEXT BYTE INTERPRETER. AT H1: 03^ IS FOUND SO
;4 BYTES ARE SKIPPED OVER:
; EXC PRINTING TEXT
; 1. S3/
; BL PRINTING TEXT
; T PRINTING TEXT
; 2. .
; 3. AO/
; 4. AOB/
; THE NEXT LETTERS JRS ARE TYPED OUT. THEN T/ IS FOUND. AT
;T; A T IS TYPED OUT; THEN A "." IS FOUND AND EVERYTHING STOPS.
;
; THE TABLE IS ALSO USED GOING FROM SYMBOLIC TO BINARY BUT A
; TREE SEARCH METHOD IS USED.
;.ADR - DECLARE TAG; .TRA - TRANSFER BYTE; .TRAX - EXTENDED TRANSFER
;BYTE; .DIS - DISPATCH BYTE; .TXT - TEXT BYTES; .END - TEXT BYTES
;FOLLOWED BY STOP BYTE.
DEFINE BYT9 (A) <
XLIST
IRP A,<
A>
LIST>
IF1,<
DEFINE .ADR (A) <
%'A== CLOC
FIR.== CLOC
DEFINE .ADR (B) <
%'B== CLOC
LASTB==CLOC+74-FIR.>>
DEFINE .TRA (A)<CLOC==CLOC+1>
DEFINE .TRAX (A)<CLOC==CLOC+2>
SYN .TRA, .DIS
DEFINE .TXT (A) <
IFNB <A>, <IRPC A,<CLOC==CLOC+1>>>
DEFINE .END (A) <
IFNB <A>, <IRPC A,<CLOC==CLOC+1>>
CLOC== CLOC+1>
> ;END OF IF1
IF2,<
DEFINE .ADR (A)<IFN %'A-CLOC,<PRINTX PHASE ERR AT: %'A>>
DEFINE .TRA (A) <OUTP %'A+74-FIR.>
DEFINE .TRAX (A),<OUTP 73
OUTP 74+<Z1==%'A-FIR.-1000+74>
IFL Z1,<PRINTX "A" TOO SMALL FOR .TRAX>>
DEFINE .DIS (A) <OUTP A&70/2+A&7-1>
DEFINE .TXT (A) <IFNB <A>,<IRPC A,<OUTP "A"-40>>>
DEFINE .END (A) <
IFNB <A>, <IRPC A,<OUTP "A"-40>>
OUTP 40>
DEFINE OUTP (A)<
IFGE <A>-1000,<PRINTX OPTABLE BYTE "A" TOO BIG>
IFE <BINC==BINC-9>-^D27,<BINR1==A>
IFE BINC-^D18,<BINR2==A>
IFE BINC-9,<BINR3==A>
IFE BINC,< BYTE (9) BINR1,BINR2,BINR3,<A>
BINC==^D36>
CLOC==CLOC+1 >
>
TBL: .XCREF ;OPDECODER BYTE TABLE
CLOC== 0 ;SET BYTE LOCATION COUNTER TO 0
BINC== ^D36 ;INIT BYTES/WORD COUNTER
;**********THE ARGUMENT FOR THE FOLLOWING "BYT9" MACRO
;**************TERMINATES AT THE NEXT COMMENT WITH: **************
;NOTE UUO'S LEFT IN TOPS-20 USER DDT (FOR NOW) FOR DEBUGGING
;COMPATIBLE PROGRAMS
IFN FTDEC20&<FTEXEC!FTMON>,<
BYT9 <
.DIS 63,.END,.TRA FLO,.TRA HAK,.TRA ACCP,.TRA BOOLE
.TRA HWT,.TXT T,.TRA ACBM>
> ;END IFN FTDEC20...
IFE FTDEC20&<FTEXEC!FTMON>,<
BYT9 <
.DIS 63,.TRA UUO,.TRA FLO,.TRA HAK,.TRA ACCP,.TRA BOOLE
.TRA HWT,.TXT T,.TRA ACBM>
> ;END IFE FTDEC20...
BYT9 <
;IO INSTRUCTIONS
.DIS 21,.TRA BD,.TXT CON,.DIS 11,.TRA OI,.TXT S,.DIS 01,.TRA Z,.TRA O
.ADR BD,.DIS 01,.TXT BLK,.TRA IO,.TXT DATA,.ADR IO,.DIS 11,.TRA I,.TRA O
.ADR OI,.DIS 01,.TRA O,.TRA I
;UUOS
.ADR UUO,.DIS 51,.END,.TXT,.DIS 32,.TRA U40,.TRAX U50,.TRA U60
.DIS 21,.TRAX U703,.DIS 11,.TRA USET,.DIS 01
.TXT LOOKU,.TRA P,.TXT ENTE,.TRA R,.ADR USET,.TXT USET,.DIS 01,.TRA I,.TRA O
.ADR U40,.DIS 03,.END,.TXT INI,.TRA T,.END,.END,.END,.END,.END,.TXT CALL,.TRA I
.ADR U60,.DIS 21,.TRA U603,.DIS 01,.TXT IN,.TRA BPUT,.TXT OUT
.ADR BPUT,.DIS 11,.TXT BU,.ADR F,.END F,.TXT,.TXT PU,.TRA T
.ADR U603,.DIS 01,.TRA U6062,.TXT STAT,.DIS 11,.ADR O,.END O,.TXT,.ADR Z,.END Z,.TXT
.ADR U6062,.DIS 11,.TXT S,.TRA U62,.TXT G,.ADR U62,.TXT ETST,.TRA S
;BYTE AND FLOATING INSTRUCTIONS
.ADR FLO,.DIS 51,.TRA BYTE,.TXT F,.DIS 32,.TXT,.TXT AD,.TRA A,.TXT SB
.TRA A,.TXT MP,.TRA A,.TXT DV,.ADR A
.DIS 21,.TRA LMB,.TXT R,.TRA IMB,.ADR LMB,.DIS 02,.END,.TXT
.ADR L,.END L,.TXT,.ADR M,.END M,.TXT
.ADR B,.END B,.TXT,.ADR BYTE,.DIS 32,.TRAX I100,.TRAX I110,.TRAX I120,.TXT
.DIS 03,.TXT UF,.TRA PA,.TXT DF,.TRA N
.TXT FS,.TRA C,.TXT IB,.ADR P,.END P,.TXT,.TXT I,.TRA LD
.ADR LD,.TXT LD,.TRA B,.TXT I,.TRA DP,.ADR DP,.TXT DP,.TRA B
;FWT-FIXED POINT ARITH-MISC
.ADR HAK,.DIS 33,.TRA MV,.ADR MV,.TXT MOV,.TRA MO,.TRA ML,.TRA DV
.TRA SH,.TRA H1,.TRA JP
.DIS 21,.TXT ADD,.TRA IMB,.TXT SU,.ADR BIMB,.TXT B,.ADR IMB,.DIS 02,.END,.TXT
.ADR I,.END I,.TXT,.TRA M,.TRA B,.ADR MO,.DIS 22
.ADR EIMS,.TXT E,.TRA IMS,.TXT S,.TRA IMS,.TXT N,.TRA IMS,.TXT M
.ADR IMS,.DIS 02,.END,.TXT,.TRA I,.TRA M,.ADR S,.END S,.TXT
.ADR ML,.DIS 21,.TXT I,.TRA ML1,.ADR ML1,.TXT MUL,.TRA IMB
.ADR DV,.DIS 21,.TXT I,.TRA DV1
.ADR DV1,.TXT DI,.ADR DV2,.TXT V,.TRA IMB,.ADR H1,.DIS 03,.TXT EXC,.TRA S3,.TXT BL
.ADR T,.END T,.TXT,.TRA AO,.ADR AO,.TXT AOBJ
.TRA AOB,.TXT JRS,.TRA T,.TXT JFC,.TRA L,.TXT XC,.TRA T,.TXT MA,.TRA P
.ADR AOB,.DIS 01,.TRA P,.TRA N
.ADR JP,.DIS 03,.TRA PU,.ADR PU,.TXT PUSH,.TRA PUS,.TRA PO
.ADR PO,.TXT POP,.TRA POP,.TXT JS,.ADR R,.END R,.TXT
.TXT JS,.TRA P,.TXT JS,.ADR PA,.END A,.TXT,.TXT JR,.TRA PA
.ADR PUS,.DIS 01,.ADR J,.END J,.END,.TXT,.ADR POP
.DIS 01,.END,.TXT,.TRA J,.ADR SH,.DIS 02,.TXT A,.TRA S2,.TXT ROT,.TRA S1,.TXT L
.ADR S2,.TXT S,.ADR S3,.TXT H,.TRA S1,.DIS 21,.TXT JFF,.TRA O,.END
.ADR S1,.DIS 21,.END,.TXT,.ADR C,.END C,.TXT
;ARITH COMP-SKIP-JUMP
.ADR ACCP,.DIS 42,.TXT CA,.TRA CA1,.TRA SJ,.TXT A,.TRA JS,.TXT S
.ADR JS,.TXT O,.DIS 31
.TXT J,.TRA COMP,.TXT S,.TRA COMP,.ADR CA1,.DIS 31,.TXT I,.TRA COMP,.TXT M,.TRA COMP
.ADR SJ,.DIS 31,.TXT JUM,.TRA PSJ,.TXT SKI,.ADR PSJ,.TXT P,.ADR COMP
.DIS 03,.END,.TXT,.TRA L,.ADR E,.END E,.TXT,.TXT L,.TRA E,.TRA PA,.TXT G,.TRA E
.ADR N,.END N,.TXT,.END G,.TXT
;HALF WORDS
.ADR HWT,.DIS 51,.TRA HW1,.TXT H,.DIS 21,.TXT R,.TRA HW2,.TXT L
.ADR HW2,.TXT R,.TRA HW3
.ADR HW1,.DIS 21,.TRA XH,.TXT HR,.ADR HW4,.TXT L
.ADR HW3,.DIS 32,.TRA IMS,.TXT Z,.TRA IMS,.TXT O,.TRA IMS,.TRA EIMS
.ADR XH,.DIS 32,.TRA XH1,.TRA HL,.TRA HL,.ADR HL,.TXT HL,.TRA HW4
.ADR XH1,.DIS 02,.TRA HL,.TXT X,.TRA HL,.TRA HL,.TRA HL
;TEST INSTRUCTIONS
.ADR ACBM,.DIS 31,.TRA AC1,.DIS 01,.TXT D,.TRA AC2,.TXT S,.TRA AC2
.ADR AC1,.DIS 01,.TXT R,.TRA AC2,.TXT L
.ADR AC2,.DIS 42,.TXT N,.TRA EAN,.TXT Z,.TRA EAN,.TXT C,.TRA EAN,.TXT O
.ADR EAN,.DIS 12,.END,.TXT,.TRA E,.TRA PA,.TRA N
;BOOLEAN
.ADR BOOLE,.DIS 24,.TRA ST,.ADR AN,.TXT AND,.TRA B2,.TRA AN,.TRA XM,.TRA AN,.TRA ST
.TXT X,.ADR OR,.TXT OR,.TRA B2,.TXT I,.TRA OR,.TRA AN,.TXT EQ
.TRA DV2,.TRA ST,.TRA OR,.TRA ST,.TRA OR,.TRA OR
.ADR ST,.TXT SET,.ADR B2,.DIS 24,.TXT Z,.TRA IMB,.TRA IMB
.ADR CA,.TXT C,.TRA TA,.ADR TM,.TXT M,.TRA IMB
.ADR CM,.TXT C,.TRA TM,.ADR TA,.TXT A,.TRA IMB,.TRA IMB,.TRA IMB
.ADR CB,.TXT C,.TRA BIMB,.TRA IMB,.TRA CA
.TRA CA,.TRA CM,.TRA CM,.TRA CB,.TXT O,.TRA IMB
.ADR XM,.DIS 02,.TRAX STMI,.TXT XMOV,.TRA EIMS,.TRAX STM,.ADR STM,.TXT SET,.TRA TM
;PRESERVE SETMI FOR TYPEIN
.ADR STMI,.DIS 41,.TRAX STM,.TRAX STM
;INSTRUCTION GROUP 120
.ADR I120,.DIS 11,.TRAX DMOV,.DIS 01,.TXT FIX,.TRAX FIX2,.DIS 21,.END EXTEND
.TXT FLT,.ADR FIX2,.DIS 21,.END,.TRA R
.ADR DMOV,.TXT DMOV,.DIS 01,.TXT E,.TRAX EM,.TXT N
.ADR EM,.DIS 21,.END,.TRA M
;MORE UUO'S
.ADR U50,.DIS 03,.TXT OPE,.TRA N,.TXT TT,.ADR CAL,.TXT CAL,.TRA L,
.TRAX PMV,.TRAX PMV,.END
.TXT,.TXT RENAM,.TRA E,.TXT I,.TRA N,.TXT OU,.TRA T
.ADR U703,.DIS 02,.TXT CLOS,.TRA E,.TXT RELEA,.TRA S
.TXT MTAP,.TRA E,.TXT UGET,.TRA F
;INSTRUCTION GROUP 110 - DF ARITHMETIC
.ADR I110,.DIS 21,.TXT DF,.TRAX DF,.TXT D,.TRAX FXDP,.ADR DF,.DIS 02
.END AD,.END SB,.TXT M,.TRA P,.END DV
;KL10 FIXED POINT DOUBLE PRECISION OPERATIONS
.ADR FXDP,.DIS 02,.END ADD,.END SUB,.END MUL,.END DIV
;OPCODES 100 TO 107 COME HERE
.ADR I100,.DIS 03,.END,.END,.END GFAD,.END GFSB,.END JSYS,.END ADJSP
.END GFMP,.END GFDV
;OPCODES 52 AND 53 COME HERE (PMOVE AND PMOVEM)
.ADR PMV,.TXT PMOVE,.DIS 01,.END,.TRA M
;**********THIS TERMINATES THE "BYT9" MACRO ARGUMENT******>
IF1,< BLOCK <CLOC+3>/4>
IF2,< IFN BINC-^D36,<BYTE (9) BINR1,BINR2,BINR3,0> >
IFNDEF CLOC.,<CLOC.==CLOC>
IFN CLOC.-CLOC,<PRINTX PHASE ERROR IN OPTABLE>
.CREF ;TURN CREF BACK ON
BTAB: POINT 9,TBL ;TABLE USED TO GET NEXT BYTE POINTER
POINT 9,TBL,8 ;FOR TRANSFER BYTE
POINT 9,TBL,17
POINT 9,TBL,26
OPEVAL: SETZ T, ;EVALUATE FOR AN OP CODE
IDPB T,CHP ;INSERT NULL IN TEXT FOR SYMBOL
MOVEM P,SAVPDL
TRZA F,OUTF
OPTYPE: TRO F,OUTF ;TYPE AN OPCODE SYMBOLICALLY
LSH T,-33
MOVEM T,INST ;GET OPCODE INTO RIGHT 9 BITS
MOVE T,[POINT 7,OPTXT]
MOVEM T,CHP ;FOR OPEVAL,SETUP POINTER TO INPUT TEXT
TRZ F,ITF ;CLEAR INSTRUCTION TYPED FLAG
SETZB R,W1
MOVE W2,BTAB
DC1: ILDB T,W2 ;GET NEXT BYTE IN TBL
CAILE T,40
CAIL T,74
SOJGE R,DC1 ;SKIP OVER # BYTES = C(R)
JUMPG R,DC1 ;SKIP OVER ALPHA TEXT (AND EXTEND BYTES) WITHOUT COUNTING
SUBI T,40
JUMPE T,DECX ;TRANSFER ON ASTOP CODE
JUMPG T,DC2
DPB T,[XWD 340500,PNTR] ;SETUP R ON A DISPATCH BYTE
TRZ T,-4
AOS T
DPB T,[XWD 300600,PNTR]
TRNN F,OUTF
JRST DC6 ;FOR OPEVAL ONLY
LDB R,PNTR ;GET # BYTES TO SKIP OVER
JRST DC1
DC2: HRREI T,-33(T) ;TOTAL SUBTRACTED NOW IS 73
JUMPL T,DECT ;TYPE OUT A LETTER
JUMPG T,DC3 ;XFER IF BYTE .GE. 74
ILDB T,W2 ;BYTE IS EXTEND BYTE (73), GET NEXT
MOVEI T,1000-74*2+1(T) ; BYTE AND ADD IN EXTENSION (-OFFSET)
DC3: MOVEI W1,FIR.-1(T) ;BYTE IS AN XFER (1ST XFER IS 74)
IDIVI W1,4
MOVE W2,BTAB(W2) ;CALCULATE POINTER TO NEXT BYTE
ADDI W2,(W1)
JRST DC1
DECT: TRNE F,OUTF
JRST DC8 ;TYPE OUT A LETTER
ILDB W1,CHP ;GET NEXT INPUT LETTER
CAIE W1,133(T) ;COMPARE WITH ASSUMED NEXT LETTER
JRST NOMAT ;DOESNT MATCH
JRST DC1 ;MATCHES, TRY NEXT
DECX: TRNE F,OUTF ;STOP (CODE 40) HAS BEEN SEEN
POPJ P, ;IF FOR OUTPUT, RETURN
ILDB W1,CHP ;GET NEXT INPUT CHAR IF ANY
JUMPE W1,DC7 ;DOES # OF CHARS MATCH
NOMAT: POP P,R ;NO, BACK UP AND TRY SOME MORE
POP P,W2
POP P,PNTR
POP P,CHP
NOMAT1: AOS R ;ASSUME NEXT NUMBER FOR BIN VALUE
DPB R,PNTR ;STUFF INTO ANSWER
LDB R,PNTR
JUMPN R,DC6AA ;IF =0, BYTE WAS TOO BIG
CAME P,SAVPDL
JRST NOMAT ;NOT AT TOP LEVEL
POPJ P, ;UNDEFINED, FINALLY
DC6: SETZ R, ;ASSUME 0 FOR INITIAL BINARY VALUE
DPB R,PNTR
DC6AA: CAMN P,SAVPDL
JRST DC6BB
LDB T,-2(P) ;OLD VALUE OF PNTR
CAME T,(P)
JRST NOMAT1
DC6BB: PUSH P,CHP
PUSH P,PNTR
PUSH P,W2
PUSH P,R
JRST DC1
DC7: MOVE P,SAVPDL ;RESTORE PUSH DOWN POINTER
MOVE T,INST
LSH T,33 ;PUSH BINARY INTO POSITION FOR OPEVAL
LDB R,[POINT 3,T,8]
TLC T,700000
TLCN T,700000
DPB R,[POINT 10,T,12] ;ONLY DONE FOR IO INSTRUCTIONS
JRST CPOPJ1 ;SYMBOL FOUND, SKIP RETURN
DC8: TRO F,ITF ;SET INSTRUCTION TYPED FLAG
MOVEI T,133(T)
PUSHJ P,TOUT ;OUTPUT A LETTER
SETOM SPSAV ;SO $D WONT TRY TO DELETE OP CODES
JRST DC1
SUBTTL SYMBOL TABLE ROUTINES -- FIND PROGRAM NAME
;NAMSRH -- ROUTINE TO FIND THE PROGRAM NAME IN SYM IN THE SYMBOL TABLE
;CALL:
; <SET UP SYM>
; PUSHJ P,NAMSRH
; NOT FOUND
; OK RETURN
;
;RETURNS THE SYMBOL INDEX TO THE 2ND WORD OF THE PROGRAM NAME PAIR IN R.
;CAN GO TO ERR IF BAD SYMBOL TABLE FORMAT.
NAMSRH: PUSHJ P,SYMSET ;SET UP TO LOOP OVER THE SYMBOL TABLE
SUBI R,1 ;ACCOUNT FOR AOSGE BELOW
;BACK HERE TO LOOK AT THE NEXT MODULE NAME.
NAMSR2: AOSGE R ;ANY MORE SYMBOLS LEFT?
PUSHJ P,ADVSYM ;NO, GET MORE SYMBOLS IF ANY
SKIPA T,@SYPTR ;FOUND MORE SYMBOLS, GET VALUE WORD
POPJ P, ;NOT FOUND, RETURN
HLRE T,T ;NEGATIVE # WORDS IN THIS MODULE
SOSGE R ;BACK R UP TO NAME WORD
PUSHJ P,ADVSYM ;OFF END OF WINDOW?
SKIPA W2,@SYPTR ;GET NAME
JRST ERR ;VAL BUT NO NAME, BAD FORMAT!
TXNE W2,PNAME ;IS THIS A PROGRAM NAME?
JRST ERR ;NO, BAD FORMAT
CAMN W2,SYM ;MATCH?
JRST NAMSR8 ;YES, RETURN IT TO CALLER
JUMPE T,[SETO R, ;IF 0, WAS PAT.. BEFORE LINK BUG FIXED
SOJA R,NAMSR2] ;SO GOTO END OF SYMBOL TABLE AND TRY AGAIN
ADD R,T ;NO, REDUCE R BY APPROPRIATE AMOUNT
JRST NAMSR2 ;AND TRY AGAIN
;HERE WHEN WE HAVE FOUND THE PROGRAM NAME. CONVERT R TO SYMBOL IDX AND RETURN.
NAMSR8: ADD R,R2IDX ;CONVERT TO SYMBOL INDEX
ADDI R,1 ;POINT TO THE SECOND WORD
JRST CPOPJ1 ;RETURN
SUBTTL SYMBOL TABLE ROUTINES -- REMOVE AN UNDEFINED SYMBOL
;REMUN -- ROUTINE TO DELETE A SYMBOL FROM THE UNDEFINED SYMBOL TABLE.
;CALL:
; MOVE W1,<SYMBOL INDEX OF SYMBOL TO DELETE>
; PUSHJ P,REMUN
; ERROR
; NORMAL
;
;DESTROYS R, T, W1, AND W2.
REMUN: MOVX R,1B1 ;GET 1ST WORD IN THE UNDEFINED TABLE
PUSHJ P,FETSYM ; . . .
POPJ P, ;PROPAGATE ERRORS
MOVE R,W1 ;OVERWRITE 1ST WORD OF SYMBOL TO DELETE
PUSHJ P,DEPSYM ; . . .
POPJ P, ;ERROR
MOVX R,1B1+1 ;NOW GET 2ND WORD OF TABLE
PUSHJ P,FETSYM ; . . .
POPJ P, ;ERROR
AOS R,W1 ;OVERWRITE 2ND WORD OF SYMBOL TO DELETE
PUSHJ P,DSYMER ; . . .
MOVEI W1,USYMP ;WANT TO UPDATE UNDEF POINTERS
MOVNI W2,2 ;BY ONE SYMBOL
PUSHJ P,DECSYP ;DO THE WORK
POPJ P, ;BLEW IT SOMEWHERE
DMOVE TT,USYMP+S$ADR ;GET UNDEFINED'S ADR AND LEN
DMOVEM TT,ESTUT ;UPDATE TEMP COPY
JRST CPOPJ1 ;GIVE GOOD RETURN
SUBTTL SYMBOL TABLE ROUTINES -- UPDATE SYMBOL TABLE POINTERS
;INCSYP -- INCREASE SYMBOL TABLE SIZE BY ONE SYMBOL.
;DECSYP -- DECREASE SYMBOL TABLE SIZE BY N WORDS.
;DECSYA -- LOWER START ADDRESS OF A TABLE BY ONE SYMBOL.
;
;CALL:
; MOVEI W1,<INTERNAL SYMBOL BLOCK ADDRESS>
; MOVNI W2,<# WORDS TO DECREMENT> ;DECSYP ONLY
; PUSHJ P,INCSYP/DECSYP/DECSYA
; SOME KIND OF FAILURE (READ/WRITE)
; SUCCESS, POINTER UPDATED
;
;USES W, W1, W2
DECSYP: SETO W, ;FLAG ADDRESS AND LENGTH
JRST INCSY0 ;JOIN COMMON CODE
DECSYA: TDZA W,W ;FLAG ADDRESS ONLY
INCSYP: SETO W, ;FLAG ADDRESS AND LENGTH
MOVEI W2,2 ;A SYMBOL USES TWO WORDS
INCSY0: MOVEM W2,TEM ;KEEP IT SAFE
SKIPE W ;IF DOING BOTH,
ADDM W2,S$LEN(W1) ;UPDATE LENGTH
EXCH W2,S$ADR(W1) ;SET UP FOR SUBM
SUBM W2,S$ADR(W1) ;UPDATE ADDRESS
IFN FTFILE,<JRST CPOPJ1> ;FILDDT UPDATES WHEN FILE CLOSED
IFE FTFILE,<
PUSHJ P,SAVRST ;SAVE SOME ACS
SKIPN R,S$SUB(W1) ;GET PDV SUBTABLE OR IOWD ADDRESS
POPJ P, ;NEITHER, SO DON'T UPDATE IT
SKIPL S$SUF(W1) ;WHICH FORMAT POINTER?
JRST INCSYV ;VECTOR SUBTABLE ADDRESS
MOVN T,S$LEN(W1) ;IOWD-FORMAT, SIMPLE CASE
HRL T,T ;NEG COUNT IN LH
HRR T,S$ADR(W1) ;ADDRESS IN RH
JRST INCSY4 ;AND STUFF IT BACK IN
;STILL IFE FTFILE
;HERE TO UPDATE A SYMBOL TABLE VECTOR'S POINTERS
INCSYV: ADDI R,.STDAT ;WANT THE TYPE/LENGTH WORD
JUMPE W,INCSY2 ;ARE WE UPDATING LENGTH?
PUSHJ P,FETCH ;YES, GO GET IT
POPJ P, ;SHOULDN'T HAPPEN
LDB W2,[POINTR T,ST%LEN] ;GET JUST THE LENGTH
ADD W2,TEM ;UPDATE IT
DPB W2,[POINTR T,ST%LEN] ;PUT IT BACK IN THE RIGHT PLACE
PUSHJ P,DEPMEM ;AND STUFF IT INTO CORE
POPJ P, ;WON'T GO
INCSY2: ADDI R,.STPTR-.STDAT ;NOW POINT TO ADDRESS WORD
PUSHJ P,FETCH ;GO GET THE XFIW
POPJ P, ;NO GO
SUB T,TEM ;UPDATE ADDRESS WORD
INCSY4: PUSHJ P,DEPMEM ;GO STUFF NEW LENGTH
POPJ P, ;COULDN'T?
SETOM SYMVAL ;SYM POINTERS ARE STILL VALID!
IFN FTEX10,< ;HIDDEN SYMBOLS ONLY ON A -10
SKPUSR ;ONLY USE HIDDEN SYMBOLS IN EXEC MODE
SKIPN HSBLK ;AND ONLY IF WE HAVE THEM
JRST CPOPJ1 ;NO, DON'T HAVE TO CHASE THEM DOWN
SKIPE R,JOBEDV ;NEED A LONG EDV FOR THIS
SKIPL S$SUF(W1) ;AND THIS ONLY MATTERS FOR IOWD-STYLE PTRS
JRST CPOPJ1 ;NO NEED TO CHASE THE RING OTHERWISE
PUSH P,T ;SAVE THE WORD TO DEPOSIT
MOVEI S,.EDSYM-.EDCNT ;FORM INITIAL OFFSET TO WORD TO CHANGE
CAIN W1,USYMP ;UNLESS DOING UNDEFINEDS,
MOVEI S,.EDUSY-.EDCNT ;THEN USE THIS OFFSET
IFN .EDCNT,ADDI R,.EDCNT ;POINT TO THE COUNT WORD
PUSHJ P,FETCHV ;GET THE LENGTH WORD FOR THIS EDV
JRST INCSY8 ;OOPS
TLZ T,-1 ;KEEP ONLY THE LENGTH
CAIG T,.EDLNK ;IS IT LONG ENOUGH FOR US?
JRST INCSY9 ;NO, GIVE UP
INCSY6: ADDI R,.EDLNK-.EDCNT ;POINT TO LINK WORD
PUSHJ P,FETCHV ;GET ADDRESS OF NEXT EDV IN RING
JRST INCSY8 ;OOPS
MOVE R,T ;NEXT BLOCK WE WANT TO HACK
CAMN R,JOBEDV ;UNLESS WE'VE GONE ALL THE WAY AROUND
JRST INCSY9 ;THEN WE'RE DONE
IFN .EDCNT,ADDI R,.EDCNT ;KEEP POINTING AT COUNT WORD
ADD R,S ;NOT DONE, SO POINT TO WORD TO CHANGE
MOVE T,(P) ;RETRIEVE WORD TO STORE
PUSHJ P,DEPMEM ;DEPOSIT INTO THIS EDV
JRST INCSY8 ;OOPS
SUB R,S ;BACK OFF TO START OF EDV
SETOM SYMVAL ;THEY'RE STILL VALID SO FAR
JRST INCSY6 ;LOOP OVER ALL EDVS IN RING
INCSY8: SETZM SYMVAL ;SOMETHING GOT MESSED UP
INCSY9: POP P,T ;RESTORE STACK
> ;END IFN FTEX10
JRST CPOPJ1 ;GIVE GOOD RETURN
> ;END IFE FTFILE
SUBTTL SYMBOL TABLE ROUTINES -- SYMSET, USYSET, AND ADVSYM
;SYMSET -- ROUTINE TO SET UP TO SEARCH THE SYMBOL TABLE.
;CALL:
; PUSHJ P,SYMSET
; RETURN
;
;SETS UP R AND SYPTR TO FETCH LAST WORD OF TABLE. ALSO SETS UP
;INTERNAL VARIABLES SO ADVSYM WILL KNOW WHAT TO DO. HANDLES
;WINDOWING IF NEEDED.
SYMSET:
IFE FTFILE,<PUSHJ P,SYMCHK> ;MAKE SURE WE TRUST THE SYMBOL POINTERS
IFN FTEX10,<PUSHJ P,SYMSPC> ;SELECT SYMBOL SPACE
MOVE R,SYMP+S$LEN ;GET NUMBER OF SYMBOLS IN LOWSEG TABLE
ADD R,HSYMP+S$LEN ;TOTAL NUMBER OF SYMBOL WORDS TO LOOK AT
MOVEM R,SY2GO ;SEARCH STOPS WHEN THIS WORD GOES TO ZERO
SKIPN SY2GO ;ANY SYMBOLS TO LOOK AT?
SOJA R,CPOPJ ;NO, RETURN -1 TO START
TXO F,HSYMF!PNAMEF ;SEARCH LOWSEG FIRST, ASSUME NO $: POINTER
TXZ F,USYMF ;NOT SEARCHING THE UNDEFINED TABLE
SKIPN R,PRGM ;IS THERE AN OPEN MODULE?
JRST NEWSYP ;NO, JUST SELECT THE NEXT TABLE TO LOOK AT
TXZ F,PNAMEF ;TELL CALLER HE IS LOOKING AT THE OPEN MODULE
TXZN R,1B0 ;IS OPEN MODULE IN THE HIGH SEG TABLE?
SKIPA S,SYMP+S$ADR ;NO, FETCH LOWSEG TABLE POINTER
SKIPA S,HSYMP+S$ADR ;YES, FETCH HISEG TABLE POINTER
TXZA F,HSYMF ;LOSEG: REMEMBER THAT FACT
TXO F,HSYMF ;HISEG: REMEMBER THAT FACT
JRST PTRSET ;GO SEARCH S'S TABLE STARTING AT OFFSET IN R
;USYSET -- ROUTINE TO SET UP TO SEARCH THE UNDEFINED TABLE.
;CALL:
; PUSHJ P,USYSET
; RETURN
;
;DOES EVERYTHING SYMSET DOES, EXCEPT FOR THE UNDEFINED SYMBOL TABLE.
USYSET:
IFE FTFILE,<PUSHJ P,SYMCHK> ;MAKE SURE WE TRUST THE SYMBOL POINTERS
IFN FTEX10,<PUSHJ P,SYMSPC> ;SELECT SYMBOL SPACE
MOVE S,ESTUT ;GET OUR UNDEFINED TABLE
MOVE R,ESTUTL ;GET COUNT OF WORDS IN IT
MOVEM R,SY2GO ;PUT COUNT INTO SY2GO
SOJL R,CPOPJ ;COUNT-1 INTO R, RETURN -1 IF NO SYMS
TXO F,USYMF ;REMEMBER LOOKING AT THE UNDEFINED TABLE
TXZ F,HSYMF ;AND NOT AT THE HISEG TABLE
JRST PTRSET ;SET THIS POINTER UP FOR ADVSYM
;ADVSYM -- ROUTINE TO ADVANCE TO NEXT BLOCK OF SYMBOLS TO BE SEARCHED
;CALL:
; MOVEI R,-<COUNT OF WORDS TO BACK UP>
; PUSHJ P,ADVSYM
; MORE SYMBOLS TO LOOK AT, R UPDATED
; ALL DONE
;
;R WILL NORMALLY CONTAIN -1 ON THE CALL TO FETCH THE NEXT (PREVIOUS) WORD.
;IF R IS SMALLER THAN -1, THE CALLER WANTS TO SKIP BACKWARDS, AS WHEN
;SEARCHING FOR A MODULE NAME.
;
;MAY GET MORE SYMBOLS BY ADVANCING A SYMBOL WINDOW (IF WINDOWING), OR
;BY ADVANCING TO THE NEXT OF SEVERAL SYMBOL TABLES TO BE SEARCHED.
ADVSYM: AOJG R,ERR ;ERROR IF + OR 0, CONVERT TO COUNT
ADDM R,SY2GO ;DECREMENT SY2GO SINCE WE'RE SKIPPING SYMBOLS
SKIPG SY2GO ;ANY SYMBOLS LEFT TO LOOK AT?
JRST CPOPJ1 ;NO, GIVE ALL DONE RETURN
;FALL INTO NEWSYP
;NEWSYP -- ROUTINE TO SELECT THE NEXT SYMBOL TABLE (& POINTER) TO SEARCH
;CALL:
; MOVX R,-<COUNT OF SYMBOLS TO SKIP>
; PUSHJ P,NEWSYP
; RETURN
;
;ON RETURN, A NEW SYMBOL TABLE HAS BEEN SELECTED, AND R AND SYPTR HAVE BEEN
;SETUP TO SEARCH IT. ALSO SETS UP VARIOUS INTERNAL CELLS SO THAT THE NEXT
;CALL TO ADVSYM WILL KNOW WHAT TO DO.
NEWSYP: TXNN F,HSYMF ;WHICH TABLE DID WE SEARCH LAST?
SKIPN HSYMP+S$ADR ;LOSEG - IS THERE A HISEG TABLE TO SEARCH?
SKIPN S,SYMP+S$ADR ;HISEG LAST OR NO TABLE, HOW ABOUT LOSEG?
SKIPA S,HSYMP+S$ADR ;HISEG'S TURN OR NO LOSEG TABLE, GET HISEG
SKIPA TT1,SYMP+S$LEN ;LOSEG, ALSO GET LENGTH
SKIPA TT1,HSYMP+S$LEN ;HISEG, ALSO GET LENGTH
TXZA F,HSYMF ;GOING TO SEARCH LOWSEG TABLE: REMEMBER IT
TXO F,HSYMF ;GOING TO SEARCH HISEG TABLE: REMEMBER IT
ADD R,TT1 ;GET COUNT TO WORD TO LOOK AT
JUMPLE R,NEWSYP ;LOOP IF WE SHOULD SKIP THIS ENTIRE TABLE
SOJA R,PTRSET ;FORM OFFSET TO LAST WORD, AND GO SETUP
;PTRSET -- ROUTINE TO SETUP TO SEARCH A NEW SYMBOL TABLE
;CALL:
; MOVE S,<ADDRESS OF TABLE TO SEARCH>
; MOVE R,<OFFSET FROM START OF TABLE OF WORD TO LOOK AT FIRST>
; PUSHJ P,PTRSET
; RETURN
;
;ON RETURN, R AND SYPTR ARE SET UP, THE SYMBOL WINDOW HAS BEEN SET
;IF NEEDED, AND THE VARIABLES THAT ADVSYM LOOKS AT HAVE BEEN SET UP.
PTRSET: MOVE TT1,S ;COPY ADDRESS OF TABLE
SKPNS0 ;IN SECTION 0?
TXOA TT1,<Z (R)> ;NO, CONVERT TO SYPTR WITH IFIW INDEX
TXO TT1,<BYTE(2)0(4)R> ;YES, USE EFIW INDEX FOR SYPTR
MOVEM TT1,SYPTR ;STORE FOR CALLERS
MOVN TT1,R ;DECREMENT SY2GO BY NUMBER OF SYMBOLS
ADDM TT1,SY2GO ; THAT WE PLAN TO LOOK AT
SOS TT1,SY2GO ;R IS AN OFFSET, NOT A COUNT
TXNN F,HSYMF ;LOOKING AT HISEG TABLE?
TDZA TT2,TT2 ;NO, R2IDX IS ZERO
MOVX TT2,1B0 ;YES, R2IDX IS 1B0
TXNE F,USYMF ;REALLY UNDEFINED TABLE?
MOVX TT2,1B1 ;YES, R2IDX IS 1B1 INSTEAD
MOVEM TT2,R2IDX ;SET UP FOR CALLERS
JUMPGE TT1,CPOPJ ;DONE IF DIDN'T OVERFLOW SY2GO
ADD R,TT1 ;IF WE DID, THERE ARE FEW WORDS TO FETCH
MOVN TT1,TT1 ;NEED TO BUMP SYPTR
ADDM TT1,SYPTR ;SO FIXING R WON'T CHANGE WHICH WORDS WE GET
ADDM TT1,R2IDX ;ADJUST SO SYMBOL INDEX WON'T CHANGE
POPJ P, ;ALL DONE
SUBTTL MEMORY MANAGEMENT ROUTINES -- FETCH
;FETCH FROM MEMORY SUBROUTINE
;HFETCH GETS A WORD FROM THE HISEG GIVEN AN OFFSET INTO THE SEGMENT
;CALL WITH:
; R = HISEG OFFSET
; PUSHJ P,HFETCH
; NO HISEG RETURN
; HERE WITH WORD IN T
;
HFETCH:
IFN FTEXEC,<
SKPUSR ;NO HISEG SYMBOLS IN EXEC MODE
POPJ P, ; . . .
> ;END IFN FTEXEC
PUSHJ P,GETHSO ;GET START OF HISEG
JUMPE T,CPOPJ ;EXIT IF NONE
ADD R,T ;RELOCATE
PJRST FETCHL ;NOW JUST USE FETCH
;FETCH -- GENERAL FETCH FROM MEMORY ROUTINE
;FETSYM -- FETCH FROM SYMBOL VIRTUAL ADDRESS SPACE
;FETCHL -- VIRTUAL FETCH FROM CURRENT "LOCAL" SECTION
;FETCHP -- FETCH FROM PHYSICAL ADDRESS (NO MAPPING, ETC.)
;FETCHV -- FETCH FROM USER VIRTUAL ADDRESSING SPACE
;FETCHI -- FETCH FROM MEMORY POINTED TO BY PC
;CALL IS:
;
; MOVX R,<ADR> ;DDT INTERNAL ADDRESS IF DDAF ON
; PUSHJ P,FETCH
; ERROR
; NORMAL RETURN
;
;WHERE <ADR> IS THE ADDRESS IN THE "USER" ADDRESS SPACE WHOSE CON-
;TENTS ARE DESIRED.
;
;THE ERROR RETURN IS TAKEN IF THE ADDRESSED WORD IS INACCESSIBLE
;FOR SOME REASON. THE ERROR RETURN IS ALSO TAKEN IF THE PAGE DOES
;NOT EXIST, SINCE THE "?" PRINTED GIVES MORE INFO THAN THE 0 THAT
;WOULD BE PRINTED IF WE TOUCHED A NON-EXISTENT PAGE AND CREATED IT.
;IT ALSO DISTURBS OUR ENVIRONMENT LESS.
;
;THE NORMAL RETURN IS TAKEN WITH THE CONTENTS OF <ADR> IN AC T.
;
;R IS PRESERVED, TT1 AND TT2 DESTROYED.
IFE FTFILE,<
FETSYM: PUSHJ P,SAVR ;SAVE R FOR CALLER
IFN FTEX10,<
PUSHJ P,SYMSPC ;PUT OURSELF IN THE SYMBOL SPACE
> ;END IFN FTEX10
PUSHJ P,R2ADDR ;CONVERT R TO ADDRESS TO USE
JRST FETCHS ;JOIN COMMON CODE BELOW
> ;END OF IFE FTFILE
;HERE TO FETCH A WORD POINTED TO BY PC
FETCHI: TRNN R,-20 ;PC (BY DEFINITION "LOCAL") IN THE ACS?
ANDI R,17 ;YES, REDUCE TO REGISTER ADDRESS
;HERE FOR A GENERAL USER FETCH, AS IN RESPONSE TO <LOCATION>/
FETCH: SETZM MEMERS ;CLEAR ERR MSG
TXZE R,DDAF ;INTERNAL ADDRESS?
JRST [TLNE R,377777 ;MUST BE PURE IFIW
JRST .+1 ;NO, SO NOT INTERNAL
MOVE TT,R
PUSHJ P,DDSYMC ;YES, LOOK IT UP
JRST [SMERS <INVALID DDT INTERNAL ADDRESS>
POPJ P,]
MOVE T,0(R) ;FETCH IT
JRST CPOPJ1]
ANDX R,VMADR ;USE ONLY VALID 30 BITS
CAMLE R,UPROT ;AND .LE. PROTECTION ADDRESS
JRST [SMERS <ABOVE PROTECTION REGISTER LIMIT>
POPJ P,]
PUSHJ P,SAVR ;PRESERVE VIRTUAL ADDRESS FOR CALLER
ADD R,UBASE ;RELOCATE PER USER REQUEST
JSP TT1,FETFAC ;POSSIBLY FETCH FROM FAKE AC
IFN FTPAGM,<
PUSHJ P,MAPADR ;DO ANY MAPPING NECESSARY
POPJ P, ;ACCESS FAILURE
IFE FTFILE,< ;ALWAYS VIRTUAL FETCH IN FILDDT
SKIPE MAPFN ;PHYSICAL OR VIRTUAL FETCHING NEEDED?
JRST FETCH3 ;PHYSICAL FETCH
> ;END IFE FTFILE
> ;END IFN FTPAGM
JRST FETCH6 ;NO, ORDINARY VIRTUAL FETCH
;USER AND EXEC DDT STYLE HANDLING
IFE FTFILE,<
;HERE TO FETCH A WORD FROM "PHYSICAL" MEMORY SPACE
IFN FTEXEC,< ;ONLY VALID IN EXEC DDT
FETCHP: PUSHJ P,SAVR ;PRESERVE R AS ADVERTISED
FETCH3: SKPUSR ;IN EXEC MODE AT MOMENT?
PUSHJ P,OKPAG ;AND PAGING ON?
JRST FETCH5 ;NO, THEN ORDINARY VIRTUAL FETCH
MOVSI TT2,(<MOVE T,@0>) ;FETCH FROM MEMORY OPERATION
PJRST PHYIN ;DO INSTRUCTION IN PHYSICAL MEM SPACE
> ;END OF IFN FTEXEC
;HERE TO DO A VIRTUAL FETCH FROM CURRENT LOCAL SECTION
;USED ONLY FOR FINDING JOBDAT INFORMATION. IF SYMTAB NOT FROM JOBDAT,
;OPERATION IS UNDEFINED.
IFE FTDEC10,<
FETCHL: SKIPLE SYTLOC ;LOOKING AT JOBDAT SYMS?
POPJ P, ;NO, CAN'T FETCH ANYTHING
HRL R,SYTLOC ;YES, SECTION IS IN RIGHT HALF
IFN FTUD20,< ;IF USER-20,
SKIPN SYTLOC ;IF 0$5M,
HLL R,SECUDD ; USE STUB'S SECTION
> ;END IFN FTUD20
; PJRST FETCHV ;NOW DO A VIRTUAL FETCH
> ;END IFE FTDEC10
;HERE TO DO A VIRTUAL FETCH FROM "USER" ADDRESS SPACE
IFN FTDEC10,<
FETCHL:!
> ;END IFN FTDEC10
FETCHV: PUSHJ P,SAVR ;SAVE R AS ADVERTISED
FETCH5: JSP TT1,FETFAC ;SEE IF FAKE AC REFERENCE
FETCH6:
IFN FTEX10,<PUSHJ P,NORSPC> ;MAKE SURE IN NORMAL ADDRESS SPACE
FETCHS: PUSHJ P,CHKADR ;SEE IF ACCESSIBLE ADDRESS
TXNN TT,PG$EXI ;DOES PAGE EXIST?
JRST [SMERS <PAGE DOES NOT EXIST>
POPJ P,] ;SET ERROR MSG AND RETURN
TXNN TT,PG$REA ;AND CAN WE READ IT?
JRST [SMERS <NO READ ACCESS>
POPJ P,] ;SET ERROR MSG AND RETURN
JSP TT2,PZAFI ;MAY WANT TO BE IN SECTION 1
MOVE T,@R ;FETCH DESIRED VIRTUAL WORD
IFN FTDEC20,<
ERJMP [SMERS <ACTUAL REFERENCE FAILED>
POPJ P,] ;RETURN FAILURE IF THIS JUST ISN'T OUR DAY
> ;END IFN FTDEC20
JRST CPOPJ1 ;RETURN SUCCESSFULLY
> ;END OF IFE FTFILE
;PHYSICAL AND VIRTUAL FETCHES ARE IDENTICAL IN UDDT AND FILDDT.
;AC PROCESSING MAY DIFFER, BUT THAT IS CONTROLLED BY THE FAKEAC FLAG.
;FOR FILDDT, PHYSICAL ONLY PEEK IS HANDLED BY MONPEK IN EITHER CASE.
IFE FTEXEC,<
FETCHP==FETCHV ;NON-EDDT PHYSICAL FETCH
FETCH3==FETCH6 ; DITTO
> ;END OF IFE FTEXEC
SUBTTL MEMORY MANAGEMENT ROUTINES -- DEPOSIT
DEPRS: MOVEM T,LWT ;DEPOSIT REGISTER AND SAVE AS LWT
MOVE R,LLOCO ;QUAN TYPED IN REGIS EXAM
TXZE F,ROF
TXNN F,QF
POPJ P,
;FALL INTO DMEMER
;DMEMER -- DEPOSIT INTO MEMORY, GO TO ERR IF FAILURE
DMEMER: PUSHJ P,DEPMEM ;TRY TO DEPOSIT INTO MEMORY
SKIPA
POPJ P, ;SUCCESS, JUST RETURN
DMER1: MOVEI T,"?" ;START ERR MSG
PUSHJ P,TOUT
SKIPE W1,MEMERS ;GIVE SPECIFIC MESSAGE IF THERE IS ONE
PUSHJ P,TSTRG
JRST RERR ;CLEAN UP
;DSYMER -- DEPOSIT INTO SYMBOL TABLE, GO TO ERR IF FAILURE
DSYMER: PUSHJ P,DEPSYM ;TRY TO DEPOSIT INTO SYMBOL TABLE
SKIPA
POPJ P, ;JUST RETURN
TSTR <?CAN'T DEPOSIT INTO SYMBOL TABLE BECAUSE >
SKIPN W1,MEMERS
MOVEI W1,[ASCIZ /DEPOSIT FAILED/]
PUSHJ P,TSTRG
JRST RERR
;DEPMEM -- DEPOSIT INTO MEMORY
;DEPSYM -- DEPOSIT INTO SYMBOL TABLE (E.G., FILDDT)
;STOREP -- STORE INTO PHYSICAL ADDRESS
;STOREV -- STORE INTO VIRTUAL ADDRESS
;CALL IS:
;
; MOVX R,<ADR> (SYMBOL INDEX IF DEPSYM)
; MOVX T,<WORD>
; PUSHJ P,DEPMEM/DEPSYM/STORE?
; ERROR
; NORMAL RETURN
;
;WHERE <WORD> IS THE 36-BIT QUANTITY TO BE DEPOSITED INTO THE
;ADDRESS REFERENCED BY <ADDR> (AS APPROPRIATE TO ROUTINE CALLED)
;
;THE ERROR RETURN IS TAKEN IF THE DESIRED ADDRESS CANNOT BE
;WRITTEN INTO.
;
;THE NORMAL RETURN IS TAKEN WITH THE CONTENTS OF AC "T" WRITTEN INTO
;THE ADDRESS CONTAINED IN R.
;
;USES TT, TT1, TT2
IFE FTFILE,<
DEPSYM: PUSHJ P,SAVR ;SAVE R FOR CALLER
IFN FTEX10,<
PUSHJ P,SYMSPC ;PUT OURSELF IN THE SYMBOL SPACE
> ;END IFN FTEX10
PUSHJ P,R2ADDR ;CONVERT R TO ADDRESS TO USE
JRST STORES ;JOIN COMMON CODE BELOW
> ;END OF IFE FTFILE
;HERE FOR THE GENERAL DEPOSIT INTO MEMORY FUNCTION.
DEPMEM: SETZM MEMERS ;CLEAR ERROR
TXZE R,DDAF ;INTERNAL ADDRESS?
JRST [TLNE R,377777 ;MUST BE PURE IFIW
JRST .+1 ;ELSE IS NOT INTERNAL
MOVE TT,R
PUSHJ P,DDSYMC ;YES, LOOK IT UP
JRST [SMERS <INVALID DDT INTERNAL ADDRESS>
POPJ P,]
MOVEM T,0(R) ;FETCH IT
IFE FTFILE,<SETZM SYMVAL> ;FORCE RECHECK OF SYMTAB POINTERS
JRST CPOPJ1]
ANDX R,VMADR ;USE ONLY VALID 30 BITS
CAMLE R,UPROT ;AND .LE. PROTECTION ADDRESS
JRST [SMERS <ABOVE PROTECTION REGISTER LIMIT>
POPJ P,]
PUSHJ P,SAVR ;PRESERVE USER R FOR CALLER
ADD R,UBASE ;RELOCATE PER USER REQUEST
JSP TT1,STOFAC ;CHECK POSSIBLE AC REFERENCE
IFN FTFILE,< ;FOR FILDDT
SKIPN PATCHS ;MUST SPECIFICALLY ENABLE FOR DEPOSITS
JRST DEPNPT ;WASN'T, ERROR
> ;END IFN FTFILE
IFN FTPAGM,<
PUSHJ P,MAPADR ;DO ANY PAGE MAPPING NEEDED
POPJ P, ;ACCESS FAILURE
IFE FTFILE,< ;NO DIFFERENCE IN FILDDT
SKIPE MAPFN ;DO PHYSICAL OR VIRTUAL STORE?
JRST STORE3 ;PHYSICAL STORE
> ;END IFE FTFILE
> ;END IFN FTPAGM
JRST STORE6 ;ORDINARY VIRTUAL STORE
;USER AND EXEC DDT STYLE HANDLING
IFE FTFILE,<
;HERE TO STORE A WORD INTO A "PHYSICAL ADDRESS"
IFN FTEXEC,<
STOREP: PUSHJ P,SAVR ;SAVE R AS ADVERTISED
STORE3: SKPUSR ;CURRENTLY IN EXEC MODE?
PUSHJ P,OKPAG ;AND PAGING ON?
JRST STORE5 ;NO, DO REGULAR VIRTUAL STORE
MOVSI TT2,(<MOVEM T,@0>) ;DEPOSIT INTO MEMORY OPERATION
PUSHJ P,PHYIN ;DO IT IN PHYSICAL MEMORY
SOS (P) ;PROPAGATE ERROR RETURN
SETZM SYMVAL ;MIGHT CRUNCH A POINTER; DON'T TRUST SYMBOLS
SETZM PAGVAL ;MIGHT GET AN EPT; INVALIDATE PAGING INFO
SETZM PAGVAS ;INVALIDATE ALTERNATE PAGING INFO
JRST CPOPJ1 ;GIVE GOOD RETURN
> ;END OF IFN FTEXEC
;HERE TO DO REGULAR VIRTUAL STORE
STOREV: PUSHJ P,SAVR ;SAVE R AS ADVERTISED
STORE5: JSP TT1,STOFAC ;CHECK FOR AC REFERENCE
STORE6: SETZM SYMVAL ;WE NO LONGER TRUST .JBSYM ETC
IFN FTEXEC,<
SKPEXC ;IN EXEC MODE?
JRST STORES ;NO, CONTINUE
SETZM PAGVAL ;YES, INVALIDATE PAGING PTRS
SETZM PAGVAS ;AND ALTERNATE PAGING POINTERS
IFN FTDEC10,<PUSHJ P,NORSPC>;MAKE SURE IN NORMAL ADDRESS SPACE
> ;END OF IFN FTEXEC
STORES: PUSHJ P,CHKADR ;SEE ABOUT DESTINATION ADDRESS
TXNN TT,PG$EXI ;DOES PAGE EXIST?
JRST STORE8 ;NO - SEE IF USER WANTS TO CREATE IT
TXNE TT,PG$WRT ;IS PAGE WRITEABLE (I.E., MOVEM-ABLE)?
JRST STORE9 ;YES, GO DO MOVEM
SKIPN PATCHS ;NO - SHOULD WE TRY TO WRITE-ENABLE?
JRST [SMERS <NOT WRITABLE>
POPJ P,]
;FALL INTO NEXT PAGE
;STILL IFE FTFILE
;FALL IN FROM PREVIOUS PAGE
IFN FTEXEC,<
SKPUSR ;IF EXEC MODE
JRST STORE7 ;THEN DIFFERENT HANDLING
> ;END IFN FTEXEC
IFN FTDEC10,< ;TOPS-10 WRITE ENABLE CODE
PUSHJ P,WEPAGE ;WRITE-ENABLE THE PAGE
JRST [SMERS <Can't write-enable page>
POPJ P,] ;LOSE
JSP TT2,PZAFI ;MAY WANT TO SNEAK INTO SECTION 1
MOVEM T,@R ;DO THE STORE
PUSHJ P,WLPAGE ;WRITE-LOCK THE PAGE AGAIN
JRST CPOPJ1 ;SUCCEED EVEN IF CAN'T
JRST CPOPJ1 ;SUCCESSFUL RETURN
> ;END OF IFN FTDEC10
;STILL IFE FTFILE
;FALL IN FROM ABOVE
IFN FTDEC20&<^-FTMON>,< ;WRITE-ENABLE CODE FOR TOPS-20
MOVE TT1,R ;SAVE R
MOVE T1,R ;GET R FOR SPACS% JSYS
LSH T1,WRD2PG ;CONVERT TO PAGE NUMBER
HRLI T1,.FHSLF!FH%EPN ;SET ACCESS FOR THIS FORK
ANDX TT,PA%RD!PA%WT!PA%EX!PA%CPY ;ONLY LEAVE BITS SPACS% USES
MOVE T2,TT ;GET RPACS% BITS FROM CHKADR
TXO T2,PA%CPY ;SET COPY-ON-WRITE
SPACS% ;CHANGE PAGE PROPERTIES
ERJMP [SMERS <CAN'T BE WRITE ENABLED>
POPJ P,]
MOVE R,TT1 ;RESTORE R
JSP TT2,PCAFI ;SUPPRESS ADDRESS BREAK AND
MOVEM T,@R ;DO THE STORE
ERJMP [ SOS (P) ;FORCE ERROR RETURN IF FAILS
SMERS <UNEXPECTED MOVEM FAILURE>
JRST .+1] ;CONTINUE TO RE-WRITE LOCK
SETOM LASTPG ;STORE COULD HAVE CHANGED PROPERTIES
MOVE T2,TT ;RESTORE BITS AS CHKADR RETURNED THEM
SPACS% ;RESTORE PAGE ACCESS
ERJMP CPOPJ1 ;WE ALREADY CHANGED IT
JRST CPOPJ1 ;GIVE GOOD RETURN
> ;END IFN FTDEC20&<^-FTMON>
IFN FTMON,< ;MDDT'S WRITE ENABLE CODE
MOVE TT1,R ;PRESERVE R OVER SWPMWE
PUSHJ P,SAVT4 ;PRESERVE JSYS ACS
PUSHJ P,@[MSEC1,,SWPMWE] ;WRITE-ENABLE SWAPPABLE MONITOR
SETOM LASTPG ;ACCESS INFO NO LONGER VALID
MOVE R,TT1 ;RESTORE R
PUSHJ P,CHKADR ;SEE IF THAT HELPED
TXNN TT,PG$WRT ;PAGE NOW WRITEABLE?
PJRST @[MSEC1,,SWPMWP] ;NO, GIVE UP
JSP TT2,PCAFI ;YES, SUPPRESS ADDRESS BREAK AND
MOVEM T,@R ;DO THE STORE
ERJMP [ SOS (P) ;IF FAILS, FORCE ERROR RETURN
SMERS <Unexpected MOVEM failure>
JRST .+1] ;BUT CONTINUE TO RE-WRITE PROTECT
SETOM LASTPG ;STORE COULD HAVE CHANGED PROPERTIES
PUSHJ P,@[MSEC1,,SWPMWP] ;RE-WRITE PROTECT THE MONITOR
JRST CPOPJ1 ;RETURN SUCCESS TO CALLER
> ;END IFN FTMON
;STILL IFE FTFILE
;HERE TO WRITE-ENABLE AND DO THE WRITE ANYWAY
IFN FTEXEC,<
STORE7: SKPKI ;KA WILL NEVER GET HERE
JRST STOR7L ;NOT A KI EITHER
MAP TT1,@R ;GET PHYSICAL PAGE NUMBER
LSH TT1,PG2WRD ;MAKE INTO WORD ADDRESS
ANDI R,PAGMSK ;WORD WITH PAGE ADDRESS
IOR R,TT1 ;PHYSICAL WORD ADDRESS + BITS
JRST STOR7M ;COMMON CODE
STOR7L: SKPKLS ;KL-10 OR KS-10?
HALT ERR ;NO?????
JSP TT2,PZAFI ;MAY WANT TO DO THIS IN SECTION 1
MAP R,@R ;GET PHYSICAL WORD ADDRESS
STOR7M: TLZ R,777760 ;ONLY 22-BITS OF MEMORY BUS ADDRESS
JRST STORE3 ;TREAT AS PHYSICAL REFERENCE
> ;END IFN FTEXEC
;STILL IFE FTFILE
;HERE TO TRY TO CREATE THE PAGE THAT DOESN'T EXIST
STORE8:
IFN FTEXEC,<SKPEXC> ;NEVER NEVER TRY THIS IN EXEC MODE
SKIPN PATCHC ;AUTO-PAGE-CREATE ON?
JRST [SMERS <CAN'T CREATE PAGE>
POPJ P,] ;NO, DON'T CREATE PAGE
IFN FTDEC10,<
MOVE TT,[.PAGCD,,TT1];PAGE CREATE FUNCTION FOR PAGE.
MOVEI TT1,1 ;ONLY 1 ARGUMENT
MOVE TT2,R ;WORD ADDRESS
LSH TT2,WRD2PG ;DESIRED PAGE NUMBER
SETOM LASTPG ;FORGET ANY REMEMBERED ACCESS BITS
PAGE. TT, ;ASK MONITOR TO CREATE NEW PAGE FOR US
JRST [SMERS <CAN'T CREATE PAGE>
POPJ P,]
STORE9: JSP TT2,PZAFI ;MAY WANT TO DO THIS IN SECTION 1
MOVEM T,@R ;DO THE STORE
JRST CPOPJ1 ;SUCCESSFUL RETURN
> ;END IFN FTDEC10
;FALL THROUGH FROM STORE 8
IFN FTDEC20,<
TXNN TT,PG$WRT ;WRITEABLE?
JRST [ SMERS <NOT WRITABLE>
POPJ P,]
MOVE TT2,R
PUSHJ P,CRESEC ;CHECK AND CREATE SECTION IF NECESSARY
SKIPN SAVSTS ;WAS PSI ON?
JRST STORE9 ;NO, DON'T WORRY ABOUT PAGE-CREATE TRAPS
DMOVEM T1,TTEM1 ;SAVE SOME TEMPS
MOVEI T1,.FHSLF ;FIND OUT OUR PROCESS'
RCM% ; ACTIVE CHANNELS
TXNN T1,1B<.ICNXP> ;PAGE CREATES BEING TRAPPED?
JRST [ DMOVE T1,TTEM1 ;NO, RESTORE THE ACS
JRST STORE9] ; AND KEEP GOING
MOVEI T1,.FHSLF ;PAGE CREATES BEING TRAPPED, WE HAVE
MOVX T2,1B<.ICNXP> ; TO DEACTIVATE THE CHANNEL IN ORDER
DIC% ; TO PREVENT A LATER INTERRUPT
SETOM SAVNXP ;REMEMBER WE DID THIS
DMOVE T1,TTEM1 ;RESTORE ACS
CAIA ;AND FALL INTO STORE9
STORE9: SETZM SAVNXP ;PAGE CREATES NOT BEING TRAPPED
JSP TT2,PCAFI ;SUPPRESS ADDRESS BREAK AND
MOVEM T,@R ;DO THE STORE
ERJMP [ SMERS <UNEXPECTED MOVEM FAILURE>
SOS (P) ;FORCE LATER ERROR RETURN
JRST .+1] ;CHECK PSI CHANNEL
SETOM LASTPG ;STORE COULD HAVE CHANGED PROPERTIES
SKIPN SAVNXP ;DID WE DISABLE THE CHANNEL?
JRST CPOPJ1 ;NO, ALL DONE
DMOVEM T1,TTEM1 ;SAVE ACS AGAIN
MOVEI T1,.FHSLF ;WE NEED TO RE-ACTIVATE THE
MOVX T2,1B<.ICNXP> ; PSI CHANNEL SO THE USER CAN'T
AIC% ; TELL WE FOOLED WITH IT
DMOVE T1,TTEM1 ;GET ACS BACK
JRST CPOPJ1 ;SUCCESSFUL RETURN
;CHECK FOR NONX SECTION AND CREATE IT
CRESEC: HLRZ TT,TT2 ;GET SECTION INTO TT
PUSHJ P,CHKSEC ;SEE IF IT'S THERE
TXNE TT,PG$SXI ;SECTION EXIST?
POPJ P, ;YES, ALL DONE
PUSHJ P,SAVT4 ;SAVE JSYS ARG ACS
SETZ T1, ;CREATE PRIV SECTION
HLRZ T2,TT2
HRLI T2,.FHSLF
MOVX T3,PM%RD+PM%WR+1 ;1 SECTION, READ AND WRITE
SMAP%
ERJMP CPOPJ ;FAILED, JUST CONTINUE
POPJ P,
> ;END OF IFN FTDEC20
IFE FTEXEC,<
STOREP==STOREV ;NON-EDDT PHYSICAL STORE GOES TO VIRTUAL
STORE3==STORE6 ; DITTO
> ;END IFE FTEXEC
> ;END OF IFE FTFILE
;FETCH AND DEPOSIT INTO REGISTERS (FAKE 0 - 17)
;CALL WITH A "JSP TT1," SINCE LOCATIONS 0 - 17 MAY NOT ALWAYS
;BE FAKED (DATA FILE FORMAT OR PHYSICAL MEMORY)
FETFAC: TDNN R,[777776,,777760] ;FETCH TO AN AC?
SKIPN FAKEAC ;USING FAKE 0 - 17?
JRST (TT1) ;NO, CONTINUE IN MAIN SEQUENCE
ANDI R,17 ;YES, REDUCE TO AC NUMBER
MOVE T,AC0(R) ;FETCH FAKE 0 - 17
JRST CPOPJ1 ;ALWAYS SUCCESSFUL
STOFAC: TDNN R,[777776,,777760] ;STORE TO AN AC?
SKIPN FAKEAC ;USING FAKE 0 - 17?
JRST (TT1) ;NO, CONTINUE IN MAIN SEQUENCE
ANDI R,17 ;YES, REDUCE TO AC NUMBER
MOVEM T,AC0(R) ;DEPOSIT FAKE 0 - 17
JRST CPOPJ1 ;ALWAYS SUCCESSFUL
SUBTTL MEMORY MANAGEMENT ROUTINES -- ADDRESS MAPPING
IFE FTPAGM,<
MAPADR==CPOPJ1 ;ALWAYS WIN
> ;END IFE FTPAGM
IFN FTPAGM,<
;MAPADR -- MAP USER VIRTUAL ADDRESS GIVEN $U PAGE MAP
;CALL IS:
;
; MOVX R,<ADR>
; PUSHJ P,MAPADR
; ERROR
; NORMAL RETURN
;
;WHERE <ADR> IS THE VIRTUAL ADDRESS TO BE MAPPED.
;
;ERROR RETURN IS TAKEN IF SOME WORD (E.G., A PAGE TABLE ENTRY)
;IS INACCESSIBLE OR A PAGE TABLE ENTRY DOESN'T EXIST
;
;NORMAL RETURN IS TAKEN WITH R RELOCATED INTO PHYSICAL MEMORY
;SPACE AS PER THE PAGE MAP IN MAPFN AND MAPPG.
;
;USES TT, TT1, TT2
MAPADR: SETOM MAPBTS ;KEEP TRACK OF THE ACCESS BITS
SKIPG MAPFN ;NO MAPPING OR PHYSICAL ADDRESSING?
JRST CPOPJ1 ;YES, ALL DONE
PUSHJ P,SAVT ;PRESERVE T
MOVE T,MAPFN ;GET MAPPING FUNCTION AND FLAG(S)
MOVEI TT1,-1(T) ;FUNCTION (BASED AT 0) IN TT1
TXNE T,1B1 ;SPT INDEX FLAG
SKPKIP ;CAN'T HAVE SPT INDEX WITH KI PAGING
CAIL TT1,MFNMAX ;LEGAL FUNCTION?
JRST ERR ;SOMETHING'S WRONG
PUSH P,FAKEAC ;MUST PRESERVE THIS
SETZM FAKEAC ;BUT PAGING USES PHYSICAL MEMORY
PUSHJ P,@MFNDSP(TT1) ;DISPATCH ON $U FUNCTION CODE
TRNA ;PROPAGATE NON-SKIP
AOS -1(P) ;AND SKIP
POP P,FAKEAC ;RESTORE THE FLAG
POPJ P, ;RETURN
;DISPATCH TABLE FOR MAPPING FUNCTIONS. FIRST FUNCTION IS 1.
MFNDSP: IFIW MAPEPT ;MAP THRU EPT IN MAPPG
IFIW MAPUPT ;MAP THRU UPT IN MAPPG
IFIW MAPSEC ;MAP THRU SECTION MAP IN MAPPG
MFNMAX==.-MFNDSP
IFL <PFNMAX-MFNMAX>,<PRINTX ? TOO MANY MAPADR FUNCTIONS>
;MAP THROUGH EPT IN MAPPG
MAPEPT: SKPKIP ;KI PAGING?
JRST MAPKL ;NO, GO SEE IF KL PAGING
TLNE R,-1 ;KI-PAGING ONLY ALLOWS 18-BIT VIRTUAL ADR
POPJ P, ;ILLEGAL ADDRESS
LDB T,[POINT 9,R,26];GET PAGE #
CAIGE T,340 ;IS THERE A MAP ENTRY?
JRST CPOPJ1 ;NO--LOOK IN PHYSICAL CORE
CAIL T,400 ;PER PROCESS
JRST MAPKI ;NO--JUST LIKE USER
PUSH P,R ;SAVE ARGUMENT
LSH T,-1 ;CONVERT TO 1/2 WORD
HLRE R,MAPPG ;GET ADDRESS OF UPT
JUMPL R,MAPAD9 ;NO ACCESS IF NO UPT SPECIFIED
ANDI R,17777 ;JUST PAGE NUMBER
LSH R,PG2WRD ;CONVERT TO WORD
ADDI R,400-<340/2>(T);FOR THIS PAGE
JRST MAPKI2 ;GO FETCH PAGE TABLE ENTRY
;MAP THROUGH UPT IN MAPPG
MAPUPT: SKPKIP ;KI PAGING?
JRST MAPKL ;NO, JUST LIKE EPT
;HERE TO FETCH AN ENTRY FROM A MAP SLOT
MAPKI: LDB T,[POINT 13,MAPPG,35] ;FETCH PAGE NUMBER OF PT
PUSH P,R ;SAVE R FOR CALLER
LSH T,PG2WRD ;CONVERT TO WORD
LSH R,-12 ;CONVERT TO 1/2 WORD IN MAP
ANDI R,377 ;MASK OUT JUNK
ADD R,T ;ADDRESS OF MAP ENTRY
MAPKI2: PUSHJ P,FETCHP ;FETCH PAGE TABLE ENTRY
MOVEI T,017000 ;ERROR
POP P,R ;RESTORE R
TRNN R,1000 ;ODD PAGE
HLRZ T,T ;NO--FLIP ENTRY
TRZN T,400000 ;VALID ENTRY
POPJ P, ;NO--ERROR
ANDM T,MAPBTS ;REMEMBER THE FLAGS (JUST IN CASE)
ANDI T,17777 ;JUST PAGE #
LSH T,PG2WRD ;CONVERT TO WORD ADDRESS
ANDI R,PAGMSK ;GET NEW ADDRESS
IOR R,T ; . . .
JRST CPOPJ1 ;GIVE GOOD RETURN
;STILL IFN FTPAGM
;HERE TO MAP THROUGH SECTION TABLE IN MAPPG
MAPSEC: TLNE R,-1 ;SECTION TABLE ONLY HAS 18 BITS OF ADDRESS
JRST [ SMERS <ADDRESS GREATER THAN 777777>
POPJ P,]
SKPKLP ;AND IS ONLY AVAILABLE IF KL PAGING
POPJ P, ;ERROR
PUSH P,R ;SAVE VIRTUAL ADDRESS
MOVE T,MAPPG ;GET PAGE # OR SPT SLOT
MOVE R,MAPFN ;GET FLAGS
TXNN R,1B1 ;AN SPT SLOT?
JRST MAPSE6 ;A PAGE NUMBER, JUST GO USE THE SECTION TABLE
TXO T,2B2 ;AN SPT SLOT, FAKE A SHARE POINTER
PUSHJ P,MAPTY ;FIND EFFECTIVE ADDRESS
JRST MAPAD9 ;ACCESS ERROR
JRST MAPKL6 ;JOIN COMMON CODE
;HERE WHEN T CONTAINS A PAGE NUMBER. PUT WORD NUMBER INTO T.
MAPSE6: LSH T,PG2WRD ;MAKE INTO ADDRESS
JRST MAPKL6 ;JOIN COMMON CODE
;STILL IFN FTPAGM
;HERE WHEN NOT KI PAGING FOR AN EPT OR UPT. SEE IF KL PAGING.
MAPKL: SKPKLP ;KL-PAGING?
POPJ P, ;NO, THEN DON'T KNOW WHAT TO DO
HLRZ T,R ;SECTION DESIRED
CAILE T,37 ;WITHIN RANGE?
POPJ P, ;NO, ERROR
PUSH P,R ;SAVE R
MOVE T,MAPPG ;GET PAGE # OR SPT INDEX
MOVE R,MAPFN ;FUNCTION AND FLAGS
TXNN R,1B1 ;SPT INDEX OR PAGE NUMBER?
JRST MAPKL2 ;PAGE NUMBER, PROCEED
TXO T,2B2 ;FAKE SHARE POINTER
PUSHJ P,MAPTY ;CONVERT TO ADDRESS OF PAGE
JRST MAPAD9 ;ERROR
SKIPA ;ALREADY A WORD ADDRESS
MAPKL2: LSH T,PG2WRD ;WORD ADDRESS OF UPT/EPT
MOVE R,T ;SAVE IN R
HLRZ T,0(P) ;RE-FETCH SECTION NUMBER
ADDI R,MSECTB(T) ;YES, GET DESIRED SECTION TABLE POINTER
PUSHJ P,FETCHP ;FETCH SECTION TABLE POINTER
JRST MAPAD9 ;INACCESSIBLE, ERROR
ANDM T,MAPBTS ;REMEMBER THE BIT MASK FOR WRITE & CACHE
PUSHJ P,MAPTY ;EVALUATE SECTION TABLE POINTER
JRST MAPAD9 ;SOMETHING WRONG SOMEWHERE
MAPKL6: LDB R,[POINTR <0(P)>,<PAGMSK_PG2WRD>] ;PAGE NUMBER WITHIN SECTION
ADD R,T ;POINT TO PAGE POINTER IN SECTION TABLE
PUSHJ P,FETCHP ;GET PAGE POINTER
JRST MAPAD9 ;INACCESSIBLE, ERROR
ANDM T,MAPBTS ;KEEP TRACK OF THE FLAGS
PUSHJ P,MAPTY ;EVALUATE PAGE POINTER
JRST MAPAD9 ;INACCESSIBLE
POP P,R ;RETRIEVE ORIGINAL ADDRESS
ANDI R,PAGMSK ;FORM OFFSET WITHIN PAGE
IOR R,T ;R:=PHYSICAL WORD ADDRESS
JRST CPOPJ1 ;RETURN SUCCESSFULLY
;HERE ON SOME TYPE OF ACCESS FAILURE
MAPAD9: POP P,R ;POP OLD ADDRESS OFF OF STACK
POPJ P, ;GIVE ERROR RETURN TO USER
;STILL IFN FTPAGM
;MAPTY -- DECODE MAP POINTER TYPE AND RETURN PHYSICAL PAGE ADDRESS
;CALL IS:
;
; MOVX T,<MAP POINTER>
; PUSHJ P,MAPTY
; ERROR RETURN
; NORMAL RETURN
;
;WHERE <MAP POINTER> IS A HARDWARE TYPE MAP POINTER FROM A UPT/SPT
;OR A SECTION TABLE.
;
;THE ERROR RETURN IS TAKEN IF AN ILLEGAL POINTER TYPE IS ENCOUNTERED
;OR A WORD IN THE POINTER CHAIN IS INACCESSIBLE.
;
;THE NORMAL RETURN IS TAKEN WITH T CONTAINING THE PHYSICAL ADDRESS
;OF THE BASE OF THE PAGE POINTED AT BY THE ORIGINAL POINTER.
;
;USES R, T
MAPTY: LDB R,[POINT 3,T,2] ;GET TYPE CODE
JRST @MAPTBL(R) ;DISPATCH ON CODE
;HANDLE IMMEDIATE MODE POINTER
MAPTY1: TLNE T,17 ;INCORE?
JRST [ SMERS <NOT IN CORE>
POPJ P,]
ANDI T,17777 ;YES - GET PAGE #
LSH T,PG2WRD ;MAKE INTO WORD ADDRESS
JRST CPOPJ1 ;SUCCESS
;HANDLE SHARED POINTER
MAPTY2: HRRZ R,T ;GET SPT INDEX AGAIN
PUSHJ P,GVSPT ;GET BASE ADDRESS OF SPT
POPJ P, ;NOT IN ADDRESS SPACE!
ADD R,TT ;RELOCATE INTO SPT
PUSHJ P,FETCHP ;GET THE POINTER WORD
POPJ P, ;INACCESSIBLE, ERROR
JRST @MAPTBL+1 ;TREAT LIKE TYPE 1 (IMMEDIATE)
;STILL IFN FTPAGM
;HANDLE INDIRECT POINTER
MAPTY3: LDB R,[POINT 9,T,17];GET PAGE # (INDIRECT)
TLZ T,-1 ; AND NEW SPTX
PUSH P,R ;SAVE PAGE #
PUSHJ P,GVSPT ;GET BASE ADDR OF SPT
JRST [ POP P,R ;NOT IN ADDRESS SPACE
POPJ P,]
MOVE R,TT ;PUT INTO AC R
ADD R,T ;ADD IN INDEX
PUSHJ P,FETCHP ;GET SPT ENTRY
SETZ T,
POP P,R ;RESTORE PAGE #
JUMPE T,CPOPJ ;ERROR
TLNE T,17 ;IN CORE?
POPJ P, ;NO, ERROR
ANDI T,17777 ;PAGE # OF PT
LSH T,PG2WRD ;CONVERT TO CORE ADDRESS
ADD R,T ;ADD IN PAGE #
PUSHJ P,FETCHP ;GET PAGE POINTER
POPJ P, ;INACCESSIBLE, ERROR
ANDM T,MAPBTS ;KEEP TRACK OF THE BITS
JRST MAPTY ;AND START OVER
MAPTBL: IFIW MAPTYB ;0 - NO PAGE
IFIW MAPTY1 ;1 - IMMEDIATE POINTER
IFIW MAPTY2 ;2 - SHARED POINTER
IFIW MAPTY3 ;3 - INDIRECT POINTER
IFIW MAPTYB ;4 - ILLEAGL
IFIW MAPTYB ;5 - ILLEGAL
IFIW MAPTYB ;6 - ILLEGAL
IFIW MAPTYB ;7 - ILLEGAL
MAPTYB: SMERS <BAD POINTER ENCOUNTERED>
POPJ P,
> ;END IFN FTPAGM
SUBTTL MEMORY MANAGEMENT ROUTINES -- PHYSICAL MEMORY
IFE FTFILE,<
IFN FTEXEC,<
;PHYIN -- EXECUTE INSTRUCTION REFERING TO PHYSICAL MEMORY SPACE
;CALL IS:
;
; MOVX R,<PHY-ADR>
; MOVX TT2,<INSTR>
; PUSHJ P,PHYIN
; ERROR RETURN
; NORMAL RETURN
;
;WHERE <PHY-ADR> IS THE DESIRED PHYSICAL MEMORY ADDRESS TO BE REFER-
;ENCED; AND <INSTR> IS THE INSTRUCTION TO REFERENCE (OPERATE ON) THE
;PHYSICAL MEMORY LOCATION INDIRECTING THROUGH REGISTER "R" (E.G.,
;"MOVE T,@R"). NOTE THAT THIS ROUTINE SUPPLIES THE LOCAL INDIRECT
;ADDRESS (IN THIS CASE, "R") SO CALLER ONLY HAS TO PROVIDE OPERATOR
;AND AC FIELDS - THE REST OF TT2 MAY BE BLANK.
;
;THE ERROR RETURN IS TAKEN IF THE DESIRED PHYSICAL ADDRESS CANNOT BE
;REFERENCED, OTHERWISE THE NORMAL RETURN IS TAKEN AFTER HAVING EXE-
;CUTED THE INSTRUCTION IN AC "TT2".
PHYIN: HRRI TT2,R ;ASSUME <INSTR> INDIRECTS THROUGH "R"
MOVEM TT2,SWTEM ;STASH <INSTR> IN TEMP HOLDING AREA
SKPKIP ;KI-PAGING IN EFFECT?
JRST PHYI20 ;NO
PUSHJ P,GVEPT ;FIND VIRTUAL ADR OF EPT
POPJ P, ;NO EPT (E.G., A KA-10)
PUSH P,377(TT) ;SAVE A HANDY MAP SLOT
PUSH P,TT ;AND ADDRESS ALSO
MOVE TT1,R ;WORKING COPY OF PHYSICAL ADR
LSH TT1,WRD2PG ;PHYSICAL PAGE NUMBER
CAILE TT1,17777 ;WITHIN CONCEPTUAL LIMITS?
JRST PHYI17 ;NO, ERROR, ADDRESS TOO BIG
IORI TT1,700000 ;ACCESSIBLE, READ, WRITE, PUBLIC
HRRM TT1,377(TT) ;MAP PHYSICAL ADDRESS
PUSHJ P,CLRAM ;CLEAR THE ASSOCIATIVE MEMORY
ANDI R,000777 ;OFFSET WITHIN PAGE
IORI R,777000 ;RELOCATE THROUGH VIRTUAL PAGE
PUSHJ P,CHKADR ;SEE WHAT TYPE OF PAGE IT IS
TXNN TT,PG$EXI ;DOES PAGE EXIST?
JRST PHYI17 ;NO
TXNE TT,PG$REA ;CAN WE READ
TXNN TT,PG$WRT ;AND WRITE IT?
JRST PHYI17 ;NO??!!
JSP TT2,PCAFI ;SUPPRESS ADDRESS BREAK AND
XCT SWTEM ;EXECUTE THE OPERATION
AOS -2(P) ;TAKE SUCCESSFUL RETURN FROM PHYIN
PHYI17: POP P,TT ;VIRTUAL ADDRESS OF EPT
POP P,377(TT) ;RESTORE MAP SLOT
PJRST CLRAM ;AND RESET THE ASSOCIATIVE MEMORY
;STILL IN IFE FTFILE & IFN FTEXEC
PHYI20: SKPKLP ;KL-PAGING?
POPJ P, ;NO CAN DO
PUSHJ P,GVEPT ;FIND VIRTUAL ADDRESS OF EPT
POPJ P, ;ERROR
SKIPL CSTWRD ;DO WE HAVE A CST?
SKIPGE SPTWRD ;AND AN SPT?
POPJ P, ;NO, CAN'T DO IT
ADDI TT,MSECTB ;RELOCATE TO SECTION POINTERS
MOVE TT,@TT ;GET THE SECTION 0 POINTER
PHYI22: LDB TT1,[POINTR TT,PTRCOD] ;EXTRACT POINTER TYPE FIELD
CAIN TT1,IMMCOD ;IMMEDIATE POINTER?
JRST PHYI24 ;YES, TRIVIAL
CAIE TT1,SHRCOD ;SHARED POINTER?
POPJ P, ;NO, DON'T HANDLE INDIRECT OR OTHERS
ANDI TT,777777 ;SHARED - REDUCE TO SPT INDEX
ADD TT,SPTWRD ;RELOCATE INTO SPT
MOVE TT,@TT ;GET [IMMEDIATE] POINTER
PHYI24: ANDI TT,17777 ;REDUCE TO PHYSICAL PAGE NUMBER
PUSHJ P,FPVPG ;VIRTUAL ADDRESS (SECTION 0 PAGE TABLE)
POPJ P, ;ERROR - NOT MAPPED
ADD TT,CSTWRD ;POINT TO CST WORD FOR SECTION TABLE
PUSH P,@TT ;SAVE IT
PUSH P,TT ;SAVE ADDRESS ALSO
SUB TT,CSTWRD ;BACK TO PHYSICAL PAGE NUMBER
LSH TT,PG2WRD ;WORD ADDRESS OF SECTION TABLE
ADDI TT,777 ;PAGE 777 IN SECTION 0
PUSH P,@TT ;SAVE PAGE 777 POINTER
PUSH P,TT ;AND ADDRESS OF POINTER
MOVE TT1,R ;COPY OF REQUESTED ADDRESS
LSH TT1,WRD2PG ;PHY PAGE OF DESIRED WORD
CAILE TT1,17777 ;WITHIN REASON?
JRST PHYI27 ;NO, ERROR
TXO TT1,IMMPTR!PTWR ;MAKE INTO WRITE-ENABLE IMMEDIATE PTR
MOVEM TT1,@TT ;UPDATE SECTION TABLE
HRRZ TT1,TT1 ;BACK TO PAGE NUMBER
ADD TT1,CSTWRD ;CST ENTRY FOR THAT PAGE
PUSH P,@TT1 ;SAVE CST ENTRY FOR DESIRED PAGE
PUSH P,TT1 ;AND ITS ADDRESS (WHEW!)
MOVX TT,<AGEMSK!CSWRB> ;LEGAL AGE AND WRITE ENABLE CST WORD
MOVEM TT,@TT1 ;TO PREVENT AGE FAULT FROM DDT
;FALL THROUGH TO NEXT PAGE
;STILL IN IFE FTFILE & IFN FTEXEC
PUSHJ P,CLRAM ;CLEAR PAGING MEMORY
ANDI R,000777 ;OFFSET WITHIN PAGE
IORI R,777000 ;RELOCATE PHYSICAL TO VIRTUAL ADDRESS
PUSHJ P,CHKADR ;MAKE SURE IT REALLY EXISTS
TXNN TT,PG$EXI ;DOES PAGE EXIST?
JRST PHYI26 ;NO - ALL FOR NAUGHT (SIGH)
TXNE TT,PG$REA ;YES, CAN WE READ
TXNN TT,PG$WRT ;AND WRITE IT?
JRST PHYI26 ;NO??!! IMPOSSIBLE
JSP TT2,PCAFI ;SUPPRESS ADDRESS BREAK AND
XCT SWTEM ;REFERENCE DESIRED PHYSICAL ADDRESS
AOS -6(P) ;SUCCESSFUL RETURN FROM PHYIN
PHYI26: POP P,TT1 ;ADDR OF CST ENTRY FOR REFERENCED PAGE
MOVX TT,CORMB ;THE CST "MODIFIED" BIT
TDNE TT,@TT1 ;SET IN REAL CST?
IORM TT,0(P) ;YES, PRESERVE IT THEN
POP P,@TT1 ;RESTORE CST ENTRY (WITH UPDATED M BIT)
PHYI27: POP P,TT ;ADDRESS OF SECTION 0 SECTION TABLE
POP P,@TT ;RESTORE PAGE 777 POINTER
POP P,TT1 ;CST ADDRESS FOR SECTION TABLE
POP P,@TT1 ;RESTORE IT VERBATIM
PJRST CLRAM ;AND CLEAR PAGING MEMORY AGAIN
> ;END IFN FTEXEC
> ;END IFE FTFILE
IFN FTEX10,<
;SYMSPC -- PUT DDT INTO THE ADDRESS SPACE CONTAINING THE SYMBOLS
;NORSPC -- PUT DDT BACK INTO THE NORMAL ADDRESS SPACE
;CALL IS:
; PUSHJ P,SYMSPC/NORSPC
; RETURN
;
;DESTROYS TT1.
SYMSPC: SKIPE HSBLK ;SYMBOLS HIDDEN?
SKIPE @ADRSPC ;ALREADY IN SYMBOL SPACE?
POPJ P, ;NO NEED TO DO ANYTHING
SETOM @ADRSPC ;INDICATE NOW IN ALTERNATE SPACE
JRST NEWSPC ;GO SWITCH
NORSPC: SKIPE HSBLK ;SYMBOLS HIDDEN?
SKIPN @ADRSPC ;ALREADY IN NORMAL SPACE?
POPJ P, ;NOTHING TO DO
SETZM @ADRSPC ;REMEMBER WHERE WE'RE GOING
;FALL INTO NEWSPC
;STILL IFN FTEX10
;FALL IN FROM ABOVE
;HERE TO SWITCH ADDRESS SPACES. @ADRSPC TELLS US WHICH WAY TO GO.
;HSBLK POINTS TO A BLOCK IN THE FOLLOWING FORMAT:
;
; COUNT OF WORDS FOLLOWING
; <SUB-BLOCKS>
;
;WHERE EACH SUB-BLOCK LOOKS LIKE:
;
; COUNT OF WORDS TO TRANSFER
; ADDRESS OF HARDWARE PAGE POINTERS
; ADDRESS OF ALTERNATE PAGE POINTERS
; ADDRESS OF BLOCK TO SAVE HARDWARE POINTERS IN
;
;TO SWITCH TO THE ALTERNATE ADDRESS SPACE, WE SAVE THE CONTENTS OF
;HARDWARE PAGE POINTERS THRU HARDWARE PAGE POINTERS + COUNT TO TRANSFER - 1
;IN THE SAVE BLOCK, THEN MOVE THE ALTERNATE PAGE POINTERS INTO THE HARDWARE
;BLOCK.
;
;TO SWITCH BACK TO NORMAL SPACE, WE SIMPLY COPY THE ORIGINAL HARDWARE
;POINTERS FROM THE SAVE AREA BACK INTO THE HARDWARE BLOCK.
NEWSPC: SKPUSR ;ARE WE IN EXEC MODE?
PUSHJ P,OKPAG ;IS PAGING ON?
POPJ P, ;NOTHING WE CAN DO
PUSHJ P,SAVRST ;NEED SOME ACS
MOVE R,HSBLK ;GET ADDRESS OF WONDEROUS BLOCK
SKPNS0 ;IN SECTION 0?
TLNN R,-1 ;YES, 30-BIT ADDRESS?
SKIPA S,0(R) ;ALL OK
POPJ P, ;CAN'T SWITCH
ADD S,R ;FIND END OF BLOCK
SKPNS0 ;SECTION 0?
CAMG S,[1,,0] ;YES, IS LAST ADDRESS OK?
SKIPA S,0(R) ;YES, FETCH TOTAL COUNT AGAIN
POPJ P, ;BLOCK IS ILLEGAL
SUBI S,1 ;ALREADY PASSED COUNT WORD
;FALL THRU
;STILL IFN FTEX10
;FALL IN FROM ABOVE
;LOOP BACK HERE TO PROCESS EACH SUB-BLOCK
NEWSP2: MOVE R,S ;COUNT OF WORDS TO GO
SUBI R,3 ;+1:INITIAL COUNT WORD, -4:LENGTH OF A BLOCK
ADD R,HSBLK ;POINT TO NEXT SUB-BLOCK TO PROCESS
SKIPN @ADRSPC ;WHICH WAY ARE WE GOING?
JRST NEWSP4 ;BACK TO NORMAL
;HERE WHEN GOING TO HIDDEN SYMBOLS.
MOVE TT,0(R) ;COUNT
MOVE TT1,1(R) ;SOURCE IS HARDWARE BLOCK
MOVE TT2,3(R) ;DESTINATION IS SAVE BLOCK
PUSHJ P,DOXBLT ;DO THE COPY
JRST SPCERR ;ERROR, GET OUT
MOVE TT,0(R) ;COUNT
MOVE TT1,2(R) ;SOURCE IS SYMBOL BLOCK
MOVE TT2,1(R) ;DESTINATION IS HARDWARE BLOCK
PUSHJ P,DOXBLT ;TURN ON HIDDEN SYMBOLS
JRST SPCERR ;CAN'T, GET OUT
JRST NEWSP6 ;GO FIND NEXT SUB-BLOCK
;HERE WHEN GOING BACK INTO THE NORMAL SPACE
NEWSP4: MOVE TT,0(R) ;COUNT
MOVE TT1,3(R) ;SOURCE IS SAVE AREA
MOVE TT2,1(R) ;DESTINATION IS HARDWARE BLOCK
PUSHJ P,DOXBLT ;DO THE COPY
JRST SPCERR ;ERROR, GET OUT
;HERE WHEN A SUB-BLOCK IS DONE. ADVANCE TO THE NEXT, IF ANY
NEWSP6: SUBI S,3 ;BLOCKS ARE 4 WORDS
SOJG S,NEWSP2 ;LOOP IF ANY MORE BLOCKS
;FALL THROUGH TO NEXT PAGE
;STILL IFN FTEX10
;FALL IN FROM ABOVE
;NOW TO SWITCH THE ???WRD CELLS TO THEIR ALTERNATE VALUES.
MOVE T,EPTWRD ;CURRENT VALUE
EXCH T,EPTWRS ;SWAP WITH SAVED VALUE
MOVEM T,EPTWRD ;UPDATE NEW CURRENT VALUE
MOVE T,UPTWRD ;CURRENT VALUE
EXCH T,UPTWRS ;SWAP WITH SAVED VALUE
MOVEM T,UPTWRD ;UPDATE NEW CURRENT VALUE
MOVE T,SPTWRD ;CURRENT VALUE
EXCH T,SPTWRS ;SWAP WITH SAVED VALUE
MOVEM T,SPTWRD ;UPDATE NEW CURRENT VALUE
MOVE T,CSTWRD ;CURRENT VALUE
EXCH T,CSTWRS ;SWAP WITH SAVED VALUE
MOVEM T,CSTWRD ;UPDATE NEW CURRENT VALUE
MOVE T,PAGVAL ;CURRENT VALUE
EXCH T,PAGVAS ;SWAP WITH SAVED VALUE
MOVEM T,PAGVAL ;UPDATE NEW CURRENT VALUE
PJRST CLRAM ;CLEAR PAGER AND RETURN
;HERE ON AN ERROR. IF WE WERE TRYING TO GET BACK TO NORMAL SPACE,
;THEN THERE IS NOTHING WE CAN DO. IF WE WERE TRYING TO GET TO THE
;SYMBOL SPACE, THEN CALL THE ROUTINE TO GO BACK, AND HOPE IT WILL
;FAIL IN THE SAME PLACE.
SPCERR: SMERS <FAILURE ON SWITCHING ADDRESS SPACE>
SKIPE @ADRSPC ;WHERE WERE WE GOING?
PJRST NORSPC ;TO ALTERNATE, TRY TO GET BACK
POPJ P, ;TO NORMAL, ALL DONE
> ;END IFN FTEX10
;R2ADDR -- ROUTINE TO CONVERT A SYMBOL INDEX IN R TO AN ADDRESS
;CALL:
; MOVE R,<SYMBOL INDEX>
; PUSHJ P,R2ADDR
; RETURN
;
;DESTROYS ONLY R.
R2ADDR: PUSHJ P,SAVT ;NEED AN AC
TXZN R,1B0 ;LOOKING AT HISEG TABLE?
SKIPA T,SYMP+S$ADR ;NO, GET LOWSEG PTR
MOVE T,HSYMP+S$ADR ;YES, GET HISEG PTR
TXZE R,1B1 ;REALLY UNDEFINED TABLE?
MOVE T,ESTUT ;YES, POINT TO IT INSTEAD
ADD R,T ;FORM VIRTUAL ADDRESS IN SYMBOL VAS
POPJ P, ;DONE
SUBTTL MEMORY MANAGEMENT ROUTINES -- ADDRESS CHECKING
;CHKSYP -- VALIDITY CHECK SYMBOL TABLE POINTER
;CALL IS:
;
; MOVX T,<PTR>
; PUSHJ P,CHKSYP
; ERROR
; NORMAL
;
;WHERE <PTR> IS THE INTERNAL SYMBOL POINTER BLOCK (E.G. SYMP) WHICH
;CONTAINS THE ACTUAL SYMBOL TABLE ADDRESS/LENGTH TO BE VALIDITY CHECKED
;TO MAKE SURE EACH PAGE REFERENCED IN THE POINTER EXITS, CAN BE READ,
;AND IS A PART OF THIS PROCESS (I.E., IS NOT SPYING ON MONITOR OR
;SOMETHING).
;
;ERROR RETURN IS TAKEN IF THE BLOCK IS INVALID OTHERWISE THE NORMAL
;RETURN IS TAKEN.
;
;USES TT, TT1
CHKSYP: JUMPLE T,CPOPJ ;POINTER MUST BE .GT. 0
IFN FTEX10,<PUSHJ P,SYMSPC> ;MUST BE IN SYM VIRTUAL SPACE
PUSHJ P,SAVRST ;NEED SOME ACS
MOVE R,S$ADR(T) ;GET BASE ADDRESS OF TABLE
JUMPE R,CPOPJ ;FAIL IF NO TABLE
MOVE S,S$LEN(T) ;GET LENGTH
JUMPL S,CPOPJ ;CAN'T HAVE NEG. LENGTH SYM TAB!
XMOVEI T,SYBITS ;ADDRESS OF ROUTINE TO LOOK AT CHKADR RESULTS
PJRST CHKRNG ;CALL COMMON ROUTINE TO LOOK AT TABLE
;SYBITS -- CHKSYP ROUTINE TO CHECK A SINGLE SYMBOL TABLE PAGE
;CALL:
; MOVE TT,<CHKADR BITS>
; PUSHJ P,SYBITS
; BAD
; OK
;
;DESTROYS TT, USES NO OTHER ACS.
SYBITS: TXC TT,PG$REA!PG$EXI ;COMPLEMENT BITS THAT MUST BE OFF
TXNN TT,PG$REA!PG$EXI!PG$SPY!PG$ABZ ;PAGE LEGAL?
AOS (P) ;YES, SKIP RETURN
POPJ P, ;GIVE RETURN TO CALLER
;CHKRNG -- CHECK ACCESSIBILITY OF A RANGE OF ADDRESSES
;CALL:
; R/ FIRST ADDRESS TO CHECK
; S/ COUNT OF ADDRESSES
; T/ ROUTINE TO CALL TO DECIDE LEGALITY
; PUSHJ P,CHKRNG
; BAD
; OK
;
;ROUTINE IN T ALSO RETURNS NON-SKIP FOR BAD, SKIP FOR OK.
;DESTROYS R,S,T,TT,TT1,TT2
CHKRNG: ADD S,R ;PUT LAST ADDRESS IN S
TRZ R,PAGMSK ;START OF FIRST PAGE
SUBI S,1 ;MAKE LAST ADDRESS TO CHECK
TRZ S,PAGMSK ;START OF LAST PAGE TO CHECK
CHKRN2: PUSHJ P,CHKADR ;GET ACCESS BITS INTO TT
PUSHJ P,0(T) ;CHECK THE BITS
POPJ P, ;CALLER DOESN'T LIKE THEM
ADDI R,PAGSIZ ;ADVANCE TO NEXT PAGE
CAMG R,S ;ALL DONE?
JRST CHKRN2 ;NO, KEEP LOOPING
JRST CPOPJ1 ;YES, LIKED THEM ALL
;CHKSEC -- CHECK SECTION ACCESSIBILITY
;CALL IS:
;
; MOVX TT,<SECTION>
; PUSHJ P,CHKSEC
; RETURN
;
;WHERE <SECTION> IS THE SECTION NUMBER (NOT A PAGE OR ADDRESS).
;
;RETURNS WITH ACCESS BITS IN TT:
; PG$SXI - SECTION EXISTS
; PG$SMA - SECTION IS MAPPED ELSEWHERE
; PG$SIN - SECTION IS MAPPED INDIRECTLY
; PG$SEC - SECTION # MAPPED TO
; ON TOPS-20:
; PG$SFJ - SECTION IS MAPPED TO ANOTHER FORK OR JFN
; PG$FRK - FORK/JFN MAPPED TO
; PG$REA - SECTION IS READABLE
; PG$WT - SECTION IS WRITABLE
; PG$EXE - SECTION IS EXECUTABLE
; PG$SHR - SECTION IS SHARABLE
; PG$PRV - SECTION IS PRIVATE
;
;PRESERVES ALL OTHER ACS.
IFE FTFILE!FTMON,<
IFN FTDEC10,<
CHKSEC:
IFN FTEXEC,<
SKPUSR ;USER MODE?
JRST CHKSCX ;NO, SPECIAL CHECK
> ;END IFN FTEXEC
LSH TT,PG2WRD ;MAKE SECTION # INTO PAGE #
HRLI TT,.PAGCA ;CHECK ACCESS
PAGE. TT, ;DO IT
MOVX TT,PG$SXI ;CAN'T? RETURN NOTHING
TXC TT,PG$SXI ;-10 RETURNS "DOES NOT EXIST" BIT
ANDX TT,PG$SXI!PG$SMA!PG$SIN!PG$SEC ;ONLY SECTION-RELATED BITS
POPJ P, ;DONE
> ;END IFN FTDEC10
IFN FTDEC20,<
CHKSEC:
IFN FTEXEC,<
SKPUSR ;USER MODE?
JRST CHKSCX ;NO, SPECIAL CHECK
> ;END IFN FTEXEC
PUSHJ P,SAVT4 ;SAVE JSYS ACS
MOVE T1,TT ;GET SECTION NO.
HRLI T1,.FHSLF ;FOR THIS PROCESS
RSMAP% ;GET ACCESS
ERJMP CHKSE8 ;FAILURE? NO ACCESS
AOJE T1,CHKSE8 ;NO MAPPING? NO ACCESS
SOSN T1 ;PRIVATE MAPPING?
JRST [ TXO T2,PG$PRV ;YES, FLAG IT
JRST CHKSE7] ;NOTHING ELSE TO CHECK
TXO T2,PG$SMA ;SECTION IS MAPPED SOMEWHERE
DPB T1,[POINTR T2,PG$SEC] ;REMEMBER WHERE TO
HLRZS T1 ;GET FORK/JFN
CAIN T1,.FHSLF ;IS IT US?
JRST CHKSE7 ;YES, ALL DONE
TXO T2,PG$SFJ ;NO, FLAG MORE INFO
HRRM T1,T2 ;AND SAVE THE INFO
CHKSE7: SKIPA TT,T2 ;RETURN ACCESS IN TT
CHKSE8: SETZ TT, ;RETURN NO ACCESS
POPJ P, ;ALL DONE
> ;END IFN FTDEC20
> ;END IFE FTFILE!FTMON
;CHKSEC FOR EDDT, MDDT
IFN FTEXEC!FTMON,<
IFN FTMON,<
CHKSEC:>
CHKSCX: PUSHJ P,SAVRST ;NEED SOME MORE ACS
MOVX S,PTWR!PTPUB!PTCACH ;START WITH FULL ACCESS
MOVE T,TT ;SAVE SECTION NUMBER
IFN FTEXEC,<
PUSHJ P,GVEPT ;FIND THE EPT
JRST CHKSC8 ;NO CAN DO, NO ACCESS
> ;END IFN FTEXEC
IFN FTMON,<
MOVEI TT,KIEPT ;FIND THE EPT ADDRESS
> ;END IFN FTMON
ADDI TT,MSECTB(T) ;RELOCATE TO SECTION POINTER
MOVE T,@TT ;FETCH THE POINTER
SETZ TT, ;CLEAR RETURN ACCESS BITS
CHKSC2: AND S,T ;REMEMBER THE ACCESS BITS
LDB R,[POINTR T,PTRCOD] ;GET THE POINTER TYPE
CAIN R,IMMCOD ;IMMEDIATE?
JRST CHKSC7 ;YES, EASIEST
CAIN R,SHRCOD ;SHARED POINTER?
JRST CHKSC6 ;YES, PRETTY EASY
CAIE R,INDCOD ;INDIRECT?
JRST CHKSC8 ;UNKNOWN, NO ACCESS
LDB R,[POINT 9,T,17];FETCH NEW SECTION TABLE INDEX
TLZ T,-1 ;REDUCE TO SPT INDEX
IFN FTEXEC,<
PUSHJ P,GVSPT ;FIND THE SPT
JRST CHKSC8 ;CAN'T, NO SECTION
> ;END IFN FTEXEC
IFN FTMON,<
MOVEI TT,SPT ;FIND THE SPT ADDRESS
> ;END IFN FTMON
PUSH P,R ;SAVE THE SECTION
MOVE R,TT ;GET THE SPT ADDRESS
ADD R,T ;GET THE PROPER SPT SLOT
PUSHJ P,FETCHV ;GET THE SPT ENTRY FOR THE NEW SECTION TABLE
SETZ T, ;CAN'T, FLAG ERROR
POP P,R ;RESTORE THE SECTION INDEX
JUMPE T,CHKSC8 ;NO ENTRY MEANS NO ACCESS
TLNE T,17 ;PAGE IN CORE?
JRST CHKSC8 ;NO, CAN'T READ THE NEW POINTER
ANDI T,17777 ;GET PHYSICAL PAGE NUMBER
LSH T,PG2WRD ;MAKE IT AN ADDRESS
ADD R,T ;GET THE PROPER OFFSET INTO THE NEW TABLE
IFN FTEXEC,<
PUSHJ P,FETCHP> ;GET THE NEW SECTION POINTER
IFN FTMON,<
PUSHJ P,FETCHV> ;GET THE NEW SECTION POINTER
JRST CHKSC8 ;CAN'T, NO ACCESS ALLOWED
MOVX TT,PG$SMA!PG$SIN ;REMEMBER IT WAS INDIRECT
JRST CHKSC2 ;GOT IT! NOW LOOK AT THE NEW POINTER
;HERE WHEN A FINAL (DIRECT OR SHARED) POINTER IS FOUND
CHKSC6: TXO TT,PG$SMA ;SHARED POINTERS MEAN MAPPED
IFN FTDEC10,<
CHKSC7: TXOA TT,PG$SXI ;-10 ONLY CARES ABOUT EXISTENCE
> ;END IFN FTDEC10
IFN FTDEC20,<
CHKSC7: TXNE S,PTPUB ;IS SECTION PUBLIC?
TXOA TT,PG$SHR ;YES, THAT MEANS SHARABLE
TXO TT,PG$PRV ;NO, THAT MEANS PRIVATE
TXNE S,PTWR ;WRITABLE?
TXO TT,PG$WT ;YES
TXOA TT,PG$SXI!PG$REA!PG$EXE ;ALL SECTIONS HAVE THIS ACCESS
> ;END IFN FTDEC20
CHKSC8: SETZ TT, ;SAY NO ACCESS
POPJ P, ;RETURN
> ;END IFN FTEXEC!FTMON
;CHKSEC FOR FILDDT
IFN FTFILE,<
CHKSEC: PUSHJ P,SAVRST ;NEED SOME MORE ACS
SETZ T, ;START WITH NO ACCESS
MOVE R,TT ;GET SECTION IN R
LSH R,PG2WRD ;GET PAGE # OF FIRST PAGE IN SECTION
MOVE S,R ;COPY THAT PAGE
IORI S,PAGMSK ;LAST PAGE IN SECTION
SKIPN FILING ;LOOKING AT A FILE?
JRST CHKSE2 ;NO, DON'T CHECK PGTLEN
SKIPN EXEFMT ;EXE FILE?
JRST CHKSE9 ;SECTIONS MEANINGLESS IN A DATA FILE
IFN FTPAGM,<
SKIPLE MAPFN ;IF MAPPING,
JRST CHKSE2 ;CAN'T TELL HERE IF THE PAGES ARE IN RANGE
> ;END OF IFN FTPAGM
CAML R,PGTLEN ;THIS SECTION PAST END OF EXE FILE?
JRST CHKSE9 ;YES, SO NO ACCESS
CAMGE S,PGTLEN ;END OF SECTION PAST END OF EXE FILE?
JRST CHKSE2 ;NO, LEAVE S ALONE
MOVE S,PGTLEN ;YES, ONLY GO TO END OF FILE (+1)
SOS S ;CORRECT TO END OF FILE
CHKSE2: LSH R,PG2WRD ;CHKADR WANTS ADDRESSES
LSH S,PG2WRD ;SO MAKE SOME ADDRESSES
CHKSE3:
IFN FTPAGM,<
PUSH P,R ;SAVE THE VIRTUAL ADDRESS
PUSHJ P,MAPADR ;CONVERT VIRTUAL TO PHYSICAL
MOVX R,.INFIN ;+VE INFINITY IF TRANSLATION FAILS
> ;END OF IFN FTPAGM
PUSHJ P,CHKADR ;GET ACCESS OF A PAGE
IOR T,TT ;SAVE THE BITS
IFN FTPAGM,<
POP P,R ;RESTORE VIRTUAL ADDRESS
> ;END OF IFN FTPAGM
ADDI R,PAGSIZ ;BUMP TO NEXT PAGE
CAMG R,S ;DONE WHOLE SECTION YET?
JRST CHKSE3 ;NO, GO FOR NEXT ONE
IFE FTDEC10,<
ANDX T,PG$SXI!PG$REA!PG$WT!PG$EXE!PG$PRV!PG$SHR ;JUST WANT A FEW BITS
>
IFN FTDEC10,<
TXNE T,PG$EXI ;IF ANY PAGE EXISTS,
TXO T,PG$SXI ;SO DOES THE SECTION
ANDX T,PG$SXI ;ONLY NEED THIS BIT BACK ON THE -10
>
CHKSE9: MOVE TT,T ;PUT ACCESS IN CORRECT PLACE
POPJ P, ;ALL DONE
> ;END IFN FTFILE
;CHKADR -- CHECK ADDRESS ACCESSIBILITY
;CALL IS:
;
; MOVX R,<ADR>
; PUSHJ P,CHKADR
; RETURN
;
;WHERE <ADR> IS THE PHYSICAL ADDRESS TO BE CHECKED.
;
;RETURNS ACCESS BITS IN AC TT:
; PG$EXI - PAGE EXISTS
; PG$REA - PAGE CAN BE READ
; PG$WRT - PAGE CAN BE WRITTEN (I.E., MOVEM'ED TO)
; PG$HGH - PAGE IS PART OF [TOPS-10] HIGH SEGMENT
; PG$SPY - PAGE IS SPYING ON SOMEONE ELSE (MONITOR)
; PG$ABZ - PAGE IS ALLOCATED BUT ZERO
;
;USES TT1, TT2, ALL OTHER ACS PRESERVED.
IFE FTFILE,<
IFN FTDEC10,< ;TOPS-10 STYLE
CHKADR: MOVE TT,R ;SCRATCH COPY OF ADDRESS
ANDCMI TT,PAGMSK ;REDUCE TO JUST PAGE ADDRESS
XOR TT,LASTPG ;COMPARE AGAINST LAST PAGE CHECKED
JUMPE TT,CHKAD7 ;SAME PAGE, ALREADY HAVE ACCESS BITS
XORB TT,LASTPG ;DIFFERENT PAGE, REMEMBER FOR NEXT CALLER
SKPNS0 ;IN NON-ZERO SECTION?
TDNN R,S0PLIM ;NO, ADDRESS MUST BE .LT. THIS
TXNE R,^-VMADR ;MUST ALWAYS BE .LT. 2**30
JRST CHKAD4 ;NO WAY
IFN FTEXEC,< ;EXEC IS DIFFERENT
SKPUSR ;SEE IF USER OR EXEC MODE
JRST CHKADX ;EXEC, REQUIRES SPECIAL HANDLING
> ;END IFN FTEXEC
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
MOVE TT,R ;ADDRESS
LSH TT,WRD2PG ;PAGE NUMBER
TLNE TT,-1 ;HUGE PAGE NUMBER?
JRST CHKAD4 ;YES, NO WAY
HRLI TT,.PAGCA ;GET PAGE ACCESS BITS FUNCTION
PAGE. TT, ;ASK MONITOR
CAIA ;MAYBE A KA?
JRST CHKAD6 ;REMEMBER NEW BITS
TLNE TT,-1 ;PAGE. UNIMPLEMENTED?
SKIPN .JBHRL ;GOT A HISEG?
JRST CHKAD4 ;NO GO
PUSH P,T ;PRESERVE T OVER GETHSO
PUSHJ P,GETHSO ;FIND START OF HISEG
MOVE TT,R ;ADDRESS OF INTEREST
SUB TT,T ;OFFSET INTO HISEG
POP P,T ;ADJUST STACK
JUMPL TT,CHKAD4 ;NOT IN HISEG, NO ACCESS
HRRZ TT,.JBHRL ;TOP OF HISEG
CAIL TT,(R) ;ADDRESS IN R .LE. TOP OF HISEG?
JRST CHKAD4 ;NO, ADDRESS NOT IN HISEG
MOVX TT,PG$REA!PG$HGH!PG$ACC ;ASSUME CAN READ
HRROI TT1,.GTSGN ;HISEG INFO
GETTAB TT1, ;ASK MONITOR
SETZ TT1, ;???
TXNE TT1,SN%SPY ;SPY-SEG?
TXO TT,PG$SPY ;YES, TELL WORLD
JRST CHKAD6 ;SET BITS
CHKAD4: MOVX TT,PG$EXI!PG$SXI ;NO ACCESS (PAGE/SEC DOES NOT EXIST)
CHKAD6: MOVEM TT,LASTAF ;SAVE FULL AC FOR THOSE WHO CARE
HLLZS TT ;IGNORE RH FIELDS
TXCA TT,PG$EXI!PG$SXI ;PAGE. RETURNS COMPLEMENT OF EXISTENCE
CHKAD7: SKIPA TT,LASTAC ;GET ACCESS BITS FROM LAST CALL
CHKAD8: MOVEM TT,LASTAC ;SAVE ACCESS BITS FOR NEXT CALL
POPJ P, ;RETURN WITH BITS IN TT
> ;END OF IFN FTDEC10
;STILL IFE FTFILE
IFN FTDEC20,< ;TOPS-20 STYLE
CHKADR: MOVE TT,R ;SCRATCH COPY OF ADDRESS
ANDCMI TT,PAGMSK ;REDUCE TO JUST PAGE ADDRESS
XOR TT,LASTPG ;COMPARE AGAINST LAST PAGE CHECKED
JUMPE TT,CHKAD7 ;SAME PAGE, ALREADY HAVE ACCESS BITS
XORB TT,LASTPG ;DIFFERENT PAGE, REMEMBER FOR NEXT CALLER
SETZ TT, ;INITIALLY NO ACCESS
SKPNS0 ;IN NON-ZERO SECTION?
TLNN R,-1 ;NO, ADDRESS MUST BE .LT. 2**18
TLNE R,770000 ;ADDRESS MUST AWAYS BE .LT. 2**30
JRST CHKAD8 ;NO WAY
IFN FTEXEC,< ;EXEC IS DIFFERENT
SKPUSR ;SEE IF USER OR EXEC MODE
JRST CHKADX ;EXEC, REQUIRES SPECIAL HANDLING
> ;END IFN FTEXEC
PUSHJ P,SAVR ;SAVE R OVER (M)RPACS%
MOVE T1,R ;GET ADDRESS
IFE FTMON,<
LSH T1,WRD2PG ;GET PAGE NUMBER
HRLI T1,.FHSLF!FH%EPN
RPACS% ;READ PAGE ACCESS
ERJMP [TLZ T1,FH%EPN ;FAILED, MAYBE MONITOR DOESN'T HAVE FH%EPN
RPACS% ;TRY AGAIN
ERJMP [SETZ T2, ;PROBABLY NO SECTION THERE
JRST .+1] ;NO SAY NO ACCESS
JRST .+1] ;HAVE IT NOW
> ;END IFE FTMON
IFN FTMON,<
MRPAC% ;READ MONITOR PAGE ACCESS
> ;END IFN FTMON
TXZ T2,PA%IND ;KEEP SDDT.EXE CHECKSUM CONSISTENT
TXNE T2,PG$CPY!PG$WT ;IS THE PAGE WRITEABLE?
TXO T2,PG$WRT ;YES, SET ALL BITS FOR BOOLEAN TESTS ELSEWHERE
SKIPN T2 ;DOES THE PAGE EXIST?
; (MRPAC% RETURNS PA%PRV ONLY FOR ILL PAGE)
TXO T2,PG$REA!PG$WRT ;NO, NON-EXISTENT PAGES ARE R/W'ABLE
MOVEM T2,LASTAC ;SAVE ACCESS
CHKAD7: SKIPA TT,LASTAC ;RETURN ACCESS IN TT
CHKAD8: MOVEM TT,LASTAC ;SAVE ACCESS BITS FOR NEXT CALLER
POPJ P,
> ;END IFN FTDEC20
;STILL IFE FTFILE
IFN FTEXEC,<
;HERE TO CHECK ADDRESS ACCESSIBILITY FOR EXEC MODE
CHKADX: PUSHJ P,CHKAEX ;SEE ABOUT THIS ADDRESS
TXNE TT,PG$EXI!PG$REA!PG$WRT ;DO WE KNOW ANYTHING ABOUT THE PAGE?
POPJ P, ;YES, RETURN
;NO ACCESS, ASSUME ADDRESS BREAK, SNIFF AROUND A LITTLE HARDER . . .
XORI R,1 ;A DIFFERENT ADDRESS IN THE SAME PAGE
PUSHJ P,CHKAEX ;CHECK OUT THE OTHER ADDRESS
; IF PREVIOUS FAILURE WAS DUE TO AN
; ADDRESS BREAK THEN THIS CALL WILL
; RETURN REAL PAGE ACCESS ABILITY. IF
; THE PAGE IS TRULY INACCESSIBLE THEN
; THAT WILL STILL BE REFLECTED IN THE
; ACCESS BITS RETURNED FROM CHKAEX HERE.
XORI R,1 ;RESTORE R FOR CALLER
POPJ P, ;AND RETURN WITH ACCESS CODE IN TT
;STILL IFE FTFILE AND IFN FTEXEC
;HERE TO DO THE REAL EXEC MODE ADDRESS ACCESSIBILITY GRUNDGE . . .
CHKAEX: MOVX TT,<PG$EXI!PG$REA!PG$WRT> ;ASSUME FULL ACCESS
;CHECK FOR KA-10
SKPKA ;ON A KA-10?
JRST CHKAE0 ;NO
CONO APR,1B23 ;CLEAR NXM FLAG
SKIP (R) ;SEE WHAT MEMORY SAYS
TLNN R,-1 ;MUST ALWAYS BE .LE. 777777
CONSZ APR,1B23 ;DID NXM FLAG SET?
SETZ TT, ;YES, NO ACCESS
MOVE TT1,SAVAPR ;GET APR CONI WORD
ANDI TT1,7 ;APR PI LEVEL
CONO APR,1B23(TT1) ;CLEAR NXM, RESTORE APR PI
JRST CHKAD8 ;RETURN WITH ACCESS BITS IN TT
;CHECK FOR KI-10
CHKAE0: SKPKI ;ON A KI-10?
JRST CHKAE2 ;NO
MAP TT1,@R ;SEE WHAT PAGER THINKS ABOUT ADR
TRNE TT1,1B18 ;PAGE FAIL
TRNN TT1,1B22 ;WITH NO MATCH?
CAIA ;NO - ADR IS OK SO FAR
SETZ TT, ;YES, NO ACCESS
TRNN TT1,1B20!1B22 ;WRITE ACCESS OR NO MATCH (UNMAPPED)?
TXZ TT,PG$WRT ;NO, READ ONLY
JUMPE TT,CHKAD8 ;IF NO ACCESS DON'T BOTHER
CONO APR,1B29 ;CLEAR NXM FLAG
SKIP @R ;SEE IF MEMORY RESPONDS
TLNN R,-1 ;MUST ALWAYS BE .LE. 777777
CONSZ APR,1B29 ;DID NXM SET?
SETZ TT, ;YES, NO ACCESS
MOVE TT1,SAVAPR ;GET APR CONI WORD
ANDI TT1,77 ;APR PI LEVEL(S)
CONO APR,1B29(TT1) ;CLEAR NXM, RESTORE APR PI LEVEL(S)
JRST CHKAD8 ;RETURN WITH ACCESS BITS IN TT
;STILL IFE FTFILE & IFN FTEXEC
;CHECK FOR KL-10
CHKAE2: SKPKLS ;ON A KL-10 OR A KS-10?
JRST CHKAE4 ;NO
PUSHJ P,OKPAG ;IS PAGING ENABLED?
JRST CHKAE3 ;NO, JUST CHECK FOR NXM
JSP TT2,PZAFI ;EXECUTE NEXT INSTR IN NON-0 SEC
MAP TT1,@R ;ASK PAGER'S OPINION
TXNN TT1,TWHPFF ;PAGE FAIL?
TXNN TT1,TWVALD ;OR NO ACCESS ALLOWED?
SETZ TT, ;YES, NO ACCESS
SKPKIP ;KI-PAGING?
JRST .+3 ;NO (MUST BE KL-PAGING)
TXNN TT1,1B3 ;WRITE ACCESS?
TXZ TT,PG$WRT ;NO
SKPKLP ;KL-PAGING?
JRST .+3 ;NO (MUST HAVE BEEN KI-PAGING)
TXNN TT1,PTWR ;WRITE ACCESS?
TXZ TT,PG$WRT ;NO
JUMPE TT,CHKAD8 ;IF NO ACCESS DON'T BOTHER
CHKAE3: PUSHJ P,SAVT ;NEED ANOTHER AC
EXCH T,TT ;SAVE TT FOR MOMENT
PUSHJ P,GVUPT ;FIND VIRTUAL ADDRESS OF UPT
JRST [ EXCH TT,T ;UPT NOT IN EXEC VIRTUAL ADDRESS SPACE
JRST CHKAD8] ;SO JUST TRY THE MEM REF AND SEE WHAT HAPPENS
PUSHJ P,SAVFL ;SAVE PC FLAGS OVER POSSIBLE PAGE FAULT
ADJSP P,4 ;MAKE STACK ROOM FOR PAGE FAIL WORDS
ADDI TT,500 ;POINT TO PAGE FAIL BLOCK
DMOVE TT1,@TT ;SAVE FOUR PAGE-FAIL WORDS...
DMOVEM TT1,-3(P) ; PAGE-FAIL WORD
ADDI TT,2 ; PAGE-FAIL OLD PC//PAGE-FAIL OLD PC FLAGS
DMOVE TT1,@TT ; PAGE-FAIL NEW PC//PAGE-FAIL OLD PC
DMOVEM TT1,-1(P) ; ----------------//PAGE-FAIL NEW PC
; (NOTE CST WILL SHOW UPT MODIFIED)
XMOVEI TT1,KLNXM ;OUR VERY OWN PAGE-FAIL NEW PC
MOVE TT2,TT1 ;FOR KI-PAGING AND KL-PAGING
DMOVEM TT1,@TT ;SET BOTH
CONO APR,1B22!1B25 ;CLEAR NXM FLAG
JSP TT2,PZAFI ;SNEAK INTO NZS AS NEEDED FOR REF
SKIP @R ;REFERENCE MEMORY
CONSZ APR,1B25 ;DID NXM FLAG SET?
KLNXM: SETZ T, ;YES, NO ACCESS
DMOVE TT1,-1(P) ;RESTORE
DMOVEM TT1,@TT ; OLD
SUBI TT,2 ; PAGE-FAIL
DMOVE TT1,-3(P) ; WORDS
DMOVEM TT1,@TT ; TO UPT
ADJSP P,-4 ;RECLAIM STACK SPACE
MOVE TT,T ;ACCESS BITS BACK INTO TT
MOVE TT1,SAVAPR ;APR CONI WORD
ANDI TT1,7 ;APR PI LEVEL
CONO APR,1B22!1B25(TT1) ;CLEAR NXM, RESTORE APR PI
JRST CHKAD8 ;RETURN WITH ACCESS BITS IN TT
;STILL IFE FTFILE & IFN FTEXEC
;UNKNOWN PROCESSOR
CHKAE4: HALT ERR ;UNKNOWN PROCESSOR TYPE
> ;END OF IFN FTEXEC
> ;END OF IFE FTFILE
SUBTTL MEMORY MANAGEMENT ROUTINES -- MISCELLANEOUS
;GETHSO -- RETURN ORIGIN OF HIGH SEGMENT
;CALL IS:
;
; PUSHJ P,GETHSO
; RETURN
;
;ON RETURN AC T IS EITHER 0 IF THERE IS NO HIGH SEGMENT OR IS
;THE START OF THE HIGH SEGMENT IN THE USER VIRTUAL ADDRESS SPACE.
IFE FTFILE,< ;FIRST NON-FILDDT CASES
GETHSO: SETZ T, ;ASSUME NO HISEG
IFN FTEXEC,< ;EXEC MODE HAS NO HIGH SEG
SKPUSR ;USER OR EXEC MODE?
POPJ P, ;EXEC, NO HIGH SEG TO SPEAK OF
> ;END IFN FTEXEC
PUSHJ P,SAVR ;SAVE R TO POINT TO .JBHRL
IFN FTDEC10,< ;TOPS-10 CASE
HRROI R,.GTSGN ;GETTAB TO SEE IF WE HAVE A SINGLE HISEG
GETTAB R, ;DO WE?
JRST GETHS1 ;NO, MUST TRY SEGOP. UUO
JUMPLE R,CPOPJ ;SPY SEG OR NONE, RETURN THE ZERO
SETO T, ;GET AN INVALID ADDRESS
SEGOP. T, ;TEST FOR 7.04 OR LATER MONITOR
JUMPGE T,GETHSS ;IF SO, USE SEGOP. TO FIND REAL SECTION
HRLZ T,R ;NO, USE SEGMENT NUMBER AS TABLE INDEX
HRRI T,.GTUPM ;TRY TO FIND ITS ORIGIN
GETTAB T, ;ASK THE MONITOR
JRST GETHSQ ;KA?
HLRZ T,T ;POSITION ADDRESS WHERE IT BELONGS
ANDI T,^-PAGMSK ;MASK OUT JUNK
HRROI R,.GTSG2 ;7.03 ONLY GETTAB
GETTAB R, ;GET SECTION ASSOCIATED WITH HISEG
SETZ R, ;NON-EXTENDED MONITOR
LSH R,-<ALIGN.(SG%SCN)> ;ISOLATE SECTION NUMBER
HRLI T,(R) ;MAKE GLOBAL ADDRESS OF SEGMENT
POPJ P, ;RETURN IT TO CALLER
GETHSS: MOVEM R,SEGOPB+.SGSGN ;SAVE SEGMENT NUMBER OF INTEREST
SETZM SEGOPB+.SGSNM ;CLEAR SEGMENT NAME
SETZM SEGOPB+.SGFLG ;NO FLAGS
MOVSI R,.SGORG+1 ;GET LENGTH WE DESIRE
HLLM R,SEGOPB ;SET FOR UUO
XMOVEI R,SEGOPB ;POINT TO THE BLOCK
SEGOP. R, ;GET THE INFORMATION
JRST [SETZ T, ;SIGH, GIVE UP
POPJ P,] ;RETURN NONEXISTENCE TO CALLER
HRRZ T,SEGOPB+.SGORG ;GET LOCAL ORIGIN FOR SEGMENT
LSH T,PG2WRD ;CONVERT TO GLOBAL ADDRESS
POPJ P, ;RETURN TO CALLER
GETHSQ: MOVEI T,377777 ;DEFAULT ORIGIN-1
CAMG T,.JBREL ;HUGE LOWSEG?
MOVE T,.JBREL ;YES
ADDI T,1 ;BUMP TO START AT HIGHSEG
POPJ P, ;RETURN
;HERE WE HAVE TO HUNT AROUND FOR A HISEG
GETHS1: SKIPG R,SYTLOC ;SEE IF A REAL $5M ARGUMENT WAS GIVEN
JRST GETHS2 ;NO, GO TRY TO DEFAULT ONE
LSH R,WRD2PG ;YES, CONVERT TO A PAGE NUMBER
HRLI R,.PAGCA ;FUNCTION CODE
PAGE. R, ;GET ITS ACCESS BITS
JRST GETHS2 ;SKIP THIS ONE
TXNE R,PA.GHI ;MUST BE A HISEG
TXNE R,PA.GSP ;AND NOT A SPY-SEG
JRST GETHS2 ;NO, TRY NEXT METHOD
ANDI R,PA.GSG ;YES, ISOLATE THE SEGMENT NUMBER
JUMPE R,GETHS2 ;SHOULD NEVER HAPPEN....
PJRST GETHSS ;GET ITS ORIGIN AND RETURN IT
GETHS2: MOVEI R,.JBHRL ;HISEG END WORD
PUSHJ P,FETCHV ;GET FROM REAL JOBDAT
JRST GETHS3 ;NO SUCH LUCK
TRNN T,-1 ;IS IT SET UP?
JRST GETHS3 ;NO, TRY SOMETHING ELSE
SKIPL SYTLOC ;IF $5M SECTION SETUP, USE IT
TLZA T,-1 ;JUST TRY S0 IF NOT A JOBDAT $5M
HRL T,SYTLOC ;YES, MAKE A GLOBAL ADDRESS
LSH T,WRD2PG ;CONVERT TO PAGE NUMBER
HRLI T,.PAGCA ;FUNCTION CODE
PAGE. T, ;GET ITS ACCESS BITS
JRST GETHS3 ;STALE DATA?
TXNN T,PA.GSP ;MUST NOT BE A SPY PAGE/SEGMENT
TXNN T,PA.GHI ;AND MUST BE IN A HISEG
JRST GETHS3 ;WRONG, CAN'T USE IT
ANDI T,PA.GSG ;ISOLATE SEGMENT NUMBER
JUMPE T,GETHS3 ;SIGH, STILL NO JOY
MOVE R,T ;YES, COPY SEGMENT NUMBER
PUSHJ P,GETHSS ;GET SEGMENT INFO
SKIPN R,T ;IF NOT THERE,
JRST GETHS3 ;LOOK FOR SOMETHING ELSE
PUSHJ P,GETHSM ;CHECK FOR SYMBOLS IN THIS HISEG
POPJ P, ;YES, RETURN ITS ORIGIN
GETHS3: XMOVEI R,1(P) ;SCRATCH SPACE
SETZM (R) ;FUNCTION TO READ ENTRY VECTOR
ENTVC. R, ;READ IT
JRST GETHS4 ;NONESUCH, TRY SOMETHING ELSE
SKIPN 2(P) ;IF NO DATA,
JRST GETHS4 ;TRY SOMETHING ELSE
MOVE R,3(P) ;YES, GET START OF VECTOR (OR START ADDRESS)
LSH R,WRD2PG ;CONVERT TO PAGE
HRLI R,.PAGCA ;FUNCTION CODE
PAGE. R, ;GET ITS ACCESS BITS
JRST GETHS4 ;SHOULD NEVER FAIL
TXNE R,PA.GHI ;MUST BE A HISEG
TXNE R,PA.GSP ;AND NOT A SPYSEG
JRST GETHS4 ;WRONG, CAN'T USE IT
ANDI R,PA.GSG ;YES, ISOLATE SEGMENT NUMBER
PUSHJ P,GETHSS ;GET ITS ORIGIN
SKIPN R,T ;IF IT'S NOT THERE,
JRST GETHS4 ;WE CAN'T USE IT
PUSHJ P,GETHSM ;CHECK FOR SYMBOLS
POPJ P, ;YES, RETURN ITS ORIGIN
GETHS4: MOVSI R,.SGORG+1 ;JUST IN CASE,
HLLM R,SEGOPB ;SETUP THE ARG BLOCK LENGTH WORD
SETZM SEGOPB+.SGSGN ;SET TO START FROM THE BEGINNING
SETZM SEGOPB+.SGSNM ;OF THE SEGMENT LIST
MOVX R,SG.STP ;GET THE STEP FLAG
MOVEM R,SEGOPB+.SGFLG ;SET SO WE CAN ITERATE THROUGH
SETZ T, ;NO REMEMBERED SEGMENT
GETHS5: XMOVEI R,SEGOPB ;POINT TO ARG BLOCK
SEGOP. R, ;GET INFO FOR THE NEXT SEGMENT
POPJ P, ;RETURN WHATEVER WE LAST FOUND
SKIPN SEGOPB+.SGSGN ;IF OUT OF SEGMENTS,
POPJ P, ;RETURN WHATEVER WE LAST FOUND
HRRZ R,SEGOPB+.SGORG ;GET ITS LOCAL ORIGIN PAGE
LSH R,PG2WRD ;CONVERT TO AN ADDRESS
HLRO S,R ;GET -1,,SECTION NUMBER
XOR S,SYTLOC ;CHECK FOR MATCH WITH $5M LATER
PUSHJ P,GETHSM ;SEE IF THIS HISEG HAS SYMBOLS
MOVE T,R ;YES, UPDATE LAST ADDRESS FOUND
SKIPGE SYTLOC ;IF WE CARE ABOUT $5M
JUMPN S,GETHS5 ;THEN LOOP IF IT DIDN'T MATCH
JUMPE T,GETHS5 ;LOOP ANYWAY IF NO SYMBOLS YET
POPJ P, ;FINALLY, WE HAVE SOMETHING
;HERE TO SEE IF THE HISEG POINTED TO BY R HAS SYMBOLS
;RETURN NON-SKIP IF YES WITH T, S, & R UNCHANGED
;RETURN SKIP IF NEED TO KEEP LOOKING
GETHSM: PUSHJ P,SAVRST ;HIDE THE SIDE EFFECTS
ADDI R,.JBHSM ;OFFSET TO FIND ITS SYMBOL TABLE
PUSHJ P,FETCHV ;DOES IT HAVE ANY?
JRST CPOPJ1 ;ASSUME NOT
JUMPE T,CPOPJ1 ;GIVE CONTINUE RETURN IF NOT
POPJ P, ;YES, GIVE DONE RETURN
> ;END OF IFN FTDEC10
IFN FTDEC20,< ;TOPS-20 CASE
MOVEI R,.JBHRL ;HIGH SEG ORIGIN WORD
PUSHJ P,FETCHL ;GET IT
SETZ T, ;ASSUME NO HIGH SEG
TRNN T,-1 ;HIGH SEG EXIST?
JRST [ SETZ T, ;NO, SO INDICATE
POPJ P,] ;RETURN TO CALLER
MOVEI R,.JBHSO ;NOW FETCH ORIGIN WORD
PUSHJ P,FETCHL ;SHOULD BE SET UP BY LINK-20
SETZ T, ;??
SKIPN T ;SET UP?
MOVEI T,400 ;DEFAULT ORIGIN
LSH T,PG2WRD ;CONVERT TO ADDRESS
HRL T,SYTLOC ;PROPAGATE $5M SECTION
IFN FTUD20,< ;IF HAVE A STUB
SKIPN SYTLOC ;IF 0$5M,
HLL T,SECUDD ;USE SECTION OF STUB
> ;END IFN FTUD20
POPJ P, ;RETURN
> ;END OF IFN FTDEC20
> ;END OF IFE FTFILE
;FILDDT GETHSO
IFN FTFILE,<
GETHSO: MOVE T,JOBHSO ;GET LOWEST HISEG ADDR, IF ANY
IFN FTDEC20,<
JUMPN T,CPOPJ ;RETURN IF FOUND IT
PUSHJ P,SAVR ;NO, TRY FOR .JBHSO; SAVE R
MOVEI R,.JBHSO ;POINT TO HI SEG ORIGIN WORD
SKIPE EXEFMT ;ONLY IF EXE FORMAT
PUSHJ P,FETCHP ;GET THE DATA
SETZ T, ;NOT THERE
LSH T,PG2WRD ;FORM BASE ADDRESS
SKIPLE SYTLOC ;IF NOT USING SOME SECTION'S JOBDAT,
POPJ P, ;RETURN IT UNCHANGED
JUMPE T,CPOPJ ;SIMILARLY IF NOT THERE
HRL T,SYTLOC ;YES, FILL IN SECTION FROM $5M
> ;END IFN FTDEC20
POPJ P, ;RETURN
> ;END OF IFN FTFILE
IFN FTEXEC,<
;OKPAG -- SEE IF PAGING IS TURNED ON FOR PHYSICAL ADDRESSING
;CALL IS:
;
; PUSHJ P,OKPAG
; ERROR RETURN
; NORMAL RETURN
;
;THE ERROR RETURN IS TAKEN IF PAGING IS NOT CURRENTLY ENABLED (E.G.,
;IF RUNING ON A KA-10 OR A KL-10 BEFORE THE MONITOR HAS STARTED AND
;ENABLED PAGING), OTHERWISE THE NORMAL RETURN IS TAKEN INDICATING
;THAT PAGING IS ENABLED (SO THAT, FOR EXAMPLE, THE PHYSICAL ADDRES-
;SING CODE CAN DIDDLE THE PAGE MAP).
;
;USES NO ACS
OKPAG: SKPNKA ;ON A KA-10?
POPJ P, ;YES, ALWAYS FAILURE
;SEE IF A KI-10
SKPKI ;ON A KI-10?
JRST OKPAG2 ;NO
JRST CPOPJ1 ;YES, PAGING ALWAYS ON
;TRY FOR A KL-10 OR A KS-10
OKPAG2: SKPKLS ;ON A KL-10 OR A KS-10?
JRST OKPAG4 ;NO
PUSH P,T ;NEED A SCRATCH AC
CONI PAG,T ;(CONSZ PAG, FAILS ON KS-10)
TXNE T,PGTPEN ;IS PAGING (ET AL) ENABLED?
AOS -1(P) ;YES - INDICATE WITH SKIP RETURN
POP P,T ;RESTORE T
POPJ P, ;TELL USER
;UNKNOWN PROCESSOR TYPE
OKPAG4: HALT ERR ;UNKNOWN PROCESSOR TYPE
> ;END OF IFN FTEXEC
;WEPAGE AND WLPAGE -- ROUTINES TO WRITE-ENABLE AND WRITE-LOCK A PAGE
;CALL:
; MOVE R,VIRTUAL ADDRESS
; PUSHJ P,W?PAGE
; FAILURE RETURN
; SUCCESS RETURN
;
;CLOBBERS ONLY TT-TT3
IFE FTFILE,<
IFN FTDEC10,<
WEPAGE: MOVE TT,LASTAF ;GET THE PAGE. BITS FOR THIS PAGE
TXNN TT,PG$SPY ;CAN'T DO THIS FOR SPY PAGES
TXNN TT,PG$REA ;CAN WE READ IT?
POPJ P, ;NO--IT'S CONCEALED AND WE'RE NOT
TXNE TT,PG$HGH ;IS IT PART OF A HISEG?
JRST WEPAG1 ;YES--GO TRY IT
MOVE TT3,R ;NO--COPY THE ADDRESS IN QUESTION
LSH TT3,WRD2PG ;CONVERT TO PAGE NUMBER FOR UUO
MOVEI TT2,1 ;ONLY WANT TO HACK ONE PAGE
MOVE TT1,[.PAGWL,,TT2] ;UUO ARGUMENT TO WRITE-ENABLE A LOWSEG PAGE
PAGE. TT1, ;TRY IT
POPJ P, ;PROPAGATE FAILURE
JRST CPOPJ1 ;AND SUCCESS
WEPAG1: TXNN TT,PA.GSG ;DO WE HAVE A SEGMENT NUMBER?
JRST WEPAG2 ;NO--MONITOR IS DEFINITELY TOO OLD FOR SEGOP.
MOVE TT3,TT ;COPY SEGMENT ARGUMENT
ANDX TT3,PA.GSG ;ISOLATE THE SEGMENT NUMBER
SETZ TT2, ;WE WISH TO CLEAR THE WRITE-PROTECT BIT
MOVE TT1,[3,,.SGSWP] ;SEGOP HEADER FOR 'SET-WRITE-PROTECT'
MOVE TT,[IFIW TT1] ;SECTION-LOCAL ADDRESS OF THE ARGUMENTS
SEGOP. TT, ;TRY TO WRITE-ENABLE THE SEGMENT
TRNA ;EXAMINE FAILURE
JRST CPOPJ1 ;WE WON
JUMPGE TT,CPOPJ ;WE GOT AN ERROR CODE, PUNT
;HERE FOR MONITORS TOO OLD TO KNOW ABOUT SEGOP.
WEPAG2: SETZ TT, ;ARGUMENT TO CLEAR THE WRITE-PROTECT BIT
SETUWP TT, ;TRY TO CLEAR IT
POPJ P, ;PROPAGATE FAILURE
JRST CPOPJ1 ;AND SUCCESS
WLPAGE: MOVE TT,LASTAF ;GET THE PAGE. BITS FOR THIS PAGE
TXNN TT,PG$SPY ;CAN'T DO THIS FOR SPY PAGES
TXNN TT,PG$REA ;CAN WE READ IT?
POPJ P, ;NO--IT'S CONCEALED AND WE'RE NOT
TXNE TT,PG$HGH ;IS IT PART OF A HISEG?
JRST WLPAG1 ;YES--GO TRY IT
MOVE TT3,R ;NO--COPY THE ADDRESS IN QUESTION
LSH TT3,WRD2PG ;CONVERT TO PAGE NUMBER FOR UUO
TXO TT3,PA.GAF ;ALTERNATE FUNCTION TO WRITE-LOCK
MOVEI TT2,1 ;ONLY WANT TO HACK ONE PAGE
MOVE TT1,[.PAGWL,,TT2] ;UUO ARGUMENT TO WRITE-LOCK A LOWSEG PAGE
PAGE. TT1, ;TRY IT
POPJ P, ;PROPAGATE FAILURE
JRST CPOPJ1 ;AND SUCCESS
WLPAG1: TXNN TT,PA.GSG ;DO WE HAVE A SEGMENT NUMBER?
JRST WLPAG2 ;NO--MONITOR IS DEFINITELY TOO OLD FOR SEGOP.
MOVE TT3,TT ;COPY SEGMENT ARGUMENT
ANDX TT3,PA.GSG ;ISOLATE THE SEGMENT NUMBER
MOVEI TT2,1 ;WE WISH TO SET THE WRITE-PROTECT BIT
MOVE TT1,[3,,.SGSWP] ;SEGOP HEADER FOR 'SET-WRITE-PROTECT'
MOVE TT,[IFIW TT1] ;SECTION-LOCAL ADDRESS OF THE ARGUMENTS
SEGOP. TT, ;TRY TO WRITE-LOCK THE SEGMENT
TRNA ;EXAMINE FAILURE
JRST CPOPJ1 ;WE WON
JUMPGE TT,CPOPJ ;WE GOT AN ERROR CODE, PUNT
;HERE FOR MONITORS TOO OLD TO KNOW ABOUT SEGOP.
WLPAG2: MOVEI TT,1 ;ARGUMENT TO SET THE WRITE-PROTECT BIT
SETUWP TT, ;TRY TO SET IT
POPJ P, ;PROPAGATE FAILURE
JRST CPOPJ1 ;AND SUCCESS
> ;END IFN FTDEC10
> ;END IFE FTFILE
;GV??? -- ROUTINES TO GET THE EXEC VIRTUAL ADDRESS OF THE EPT/UPT/CST/SPT
;CALL:
; PUSHJ P,GV???
; NOT IN ADDRESS SPACE
; OK RETURN
;
;ON A SUCCESSFUL RETURN, THE BASE ADDRESS OF THE SPECIFIED TABLE IS
;RETURNED IN AC TT.
;
;PRESERVES ALL ACS.
GVEPT:
IFN FTEXEC,<
PUSHJ P,FNDPAG ;MAKE SURE PAGING DATA KNOWN
> ;END OF IFN FTEXEC
SKIPL TT,EPTWRD ;GET BASE ADDR, SKIP IF NOT IN ADDR SPACE
AOS (P) ;IT'S THERE, SKIP RETURN
POPJ P, ;RETURN
GVUPT:
IFN FTEXEC,<
PUSHJ P,FNDPAG ;MAKE SURE PAGING DATA KNOWN
> ;END OF IFN FTEXEC
SKIPL TT,UPTWRD ;GET BASE ADDR, SKIP IF NOT IN ADDR SPACE
AOS (P) ;IT'S THERE, SKIP RETURN
POPJ P, ;RETURN
GVCST:
IFN FTEXEC,<
PUSHJ P,FNDPAG ;MAKE SURE PAGING DATA KNOWN
> ;END OF IFN FTEXEC
SKIPL TT,CSTWRD ;GET BASE ADDR, SKIP IF NOT IN ADDR SPACE
AOS (P) ;IT'S THERE, SKIP RETURN
POPJ P, ;RETURN
GVSPT:
IFN FTEXEC,<
PUSHJ P,FNDPAG ;MAKE SURE PAGING DATA KNOWN
> ;END OF IFN FTEXEC
SKIPL TT,SPTWRD ;GET BASE ADDR, SKIP IF NOT IN ADDR SPACE
AOS (P) ;IT'S THERE, SKIP RETURN
POPJ P, ;RETURN
IFE FTFILE,<
IFN FTEXEC,<
;FNDPAG -- ROUTINE TO FIND THE VIRTUAL ADDRESSES OF ALL THE PAGING TABLES
;CALL:
; PUSHJ P,FNDPAG
; RETURN
;
;ON RETURN, THE ???WRD'S ARE SET TO THE BASE ADDRESS OF THE CORRESPONDING
;TABLE, OR -1 IF THE TABLE IS NOT IN THE EXEC ADDRESS SPACE.
;
;DESTROYS ONLY TT.
FNDPAG: SKIPN PAGVAL ;ALREADY BEEN HERE?
SKPEXC ;OR IN USER MODE?
POPJ P, ;YES, CAN'T DO THIS
PUSHJ P,SAVT ;SAVE AN AC FOR THE GUESSES
MOVE T,EPTWRD ;PROBABLY SAME AS LAST TIME
PUSHJ P,FVEPT ;FIND THE EPT
SETO TT, ;NOT THERE
MOVEM TT,EPTWRD ;STORE THE ADDRESS
MOVE T,UPTWRD ;MIGHT BE SAME AS LAST TIME
PUSHJ P,FVUPT ;FIND THE UPT
SETO TT, ;NOT THERE
MOVEM TT,UPTWRD ;STORE THE ADDRESS
MOVE T,CSTWRD ;PROBABLY SAME AS LAST TIME
PUSHJ P,FVCST ;FIND THE CST
SETO TT, ;NOT THERE
MOVEM TT,CSTWRD ;STORE THE ADDRESS
MOVE T,SPTWRD ;PROBABLY SAME AS LAST TIME
PUSHJ P,FVSPT ;FIND THE SPT
SETO TT, ;NOT THERE
MOVEM TT,SPTWRD ;STORE THE ADDRESS
SETOM PAGVAL ;THE ???WRD'S ARE VALID
POPJ P, ;RETURN
> ;END OF IFN FTEXEC
> ;END OF IFE FTFILE
IFE FTFILE,<
IFN FTEXEC,<
;FVEPT -- GET EXEC VIRTUAL ADDRESS OF EPT
;CALL IS:
;
; MOVE T,<GUESS FOR EPT ADDRESS OR -1>
; PUSHJ P,FVEPT
; ERROR RETURN
; NORMAL RETURN
;
;THE ERROR RETURN IS TAKEN IF THERE IS NO EPT (E.G., IF ON A KA-10)
;OTHERWISE THE EXEC VIRTUAL ADDRESS OF THE HARDWARE EPT IS
;RETURNED IN AC TT.
;
;PRESERVES ALL ACS.
FVEPT: SKPNKA ;ON A KA-10?
POPJ P, ;YES, NO EPT
;SEE IF ON A KI-10
SKPKI ;ON A KI-10?
JRST FVEPT2 ;NO
DATAI PAG,TT ;YES, READ IN UPT/EPT
JRST FVEPT3 ;AND TRANSLATE INTO VIRTUAL ADDRESS
;CHECK FOR A KL-10 OR A KS-10
FVEPT2: SKPKLS ;ON A KL-10 OR A KS-10?
JRST FVEPT4 ;NO
CONI PAG,TT ;READ KL EPT
FVEPT3: ANDI TT,17777 ;REDUCE TO MAX PHYSICAL PAGE NUMBER
ASH T,WRD2PG ;MAKE GUESS A PAGE NUMBER (PRESERVE -1)
PUSHJ P,FPVPG0 ;TRANSLATE INTO VIRTUAL PAGE NUMBER
POPJ P, ;CAN'T, ERROR
LSH TT,PG2WRD ;MAKE INTO VIRTUAL WORD ADDRESS
JRST CPOPJ1 ;TAKE SUCCESSFUL RETURN
;UNKNOWN PROCESSOR TYPE
FVEPT4: HALT CPOPJ ;DIE
> ;END IFN FTEXEC
> ;END OF IFE FTFILE
IFE FTFILE,<
IFN FTEXEC,<
;FVUPT -- GET EXEC VIRTUAL ADDRESS OF UPT
;CALL IS:
;
; MOVE T,<GUESS FOR UPT ADDRESS OR -1>
; PUSHJ P,FVUPT
; ERROR RETURN
; NORMAL RETURN
;
;THE ERROR RETURN IS TAKEN IF THERE IS NO UPT (E.G., IF ON A KA-10)
;OTHERWISE THE EXEC VIRTUAL ADDRESS OF THE HARDWARE UPT IS
;RETURNED IN AC TT.
;
;PRESERVES ALL ACS.
FVUPT: SKPNKA ;ON A KA-10?
POPJ P, ;YES, NO UPT
;SEE IF ON A KI-10
SKPKI ;ON A KI-10?
JRST FVUPT2 ;NO
DATAI PAG,TT ;YES, READ IN UPT/EPT
MOVS TT,TT ;PUT UPT IN RIGHT HALF
JRST FVUPT3 ;AND TRANSLATE INTO VIRTUAL ADDRESS
;CHECK FOR A KL-10 OR A KS-10
FVUPT2: SKPKLS ;ON A KL-10 OR A KS-10?
JRST FVUPT4 ;NO
DATAI PAG,TT ;READ KL UPT
FVUPT3: ANDI TT,17777 ;REDUCE TO MAX PHYSICAL PAGE NUMBER
ASH T,WRD2PG ;MAKE GUESS A PAGE NUMBER (PRESERVE -1)
PUSHJ P,FPVPG0 ;TRANSLATE INTO VIRTUAL PAGE NUMBER
POPJ P, ;CAN'T, ERROR
LSH TT,PG2WRD ;MAKE INTO VIRTUAL WORD ADDRESS
JRST CPOPJ1 ;TAKE SUCCESSFUL RETURN
;UNKNOWN PROCESSOR TYPE
FVUPT4: HALT CPOPJ ;DIE
> ;END IFN FTEXEC
> ;END OF IFE FTFILE
IFE FTFILE,<
IFN FTEXEC,<
;FVCST -- FIND EXEC VIRTUAL ADDRESS OF CST BASE
;FVSPT -- FIND EXEC VIRTUAL ADDRESS OF SPT BASE
;CALL IS:
;
; MOVE T,<GUESS FOR CST/SPT ADDRESS OR -1>
; PUSHJ P,FVCST/FVSPT
; ERROR RETURN
; NORMAL RETURN
;
;THE ERROR RETURN IS TAKEN IF THE HARDWARE BASE OF THE CST OR SPT
;(AS APPROPRIATE) IS INACCESSIBLE FROM EXEC VIRTUAL ADDRESS SPACE.
;
;THE NORMAL RETURN IS TAKEN WITH THE EXEC VIRTUAL ADDRESS OF THE
;BASE OF THE CST OR SPT (AS APPROPRIATE) IN REGISTER TT.
;
;PRESERVES ALL ACS.
FVCST: TDZA TT,TT ;FLAG CST READ
FVSPT: SETO TT, ;FLAG SPT READ
MOVNM TT,FVTEM1 ;SAVE CST/SPT FLAG
SKPKLP ;KL PAGING IN EFFECT?
POPJ P, ;NO, NO CST/SPT THEN
SKPKL ;ON A KL-10?
JRST FVSPT4 ;NO
DATAI PAG,TT ;READ CURRENT AC BLOCK SELECTION
TXO TT,1B0 ;SET TO SELECT NEW AC BLOCKS
TXZ TT,1B1!1B2 ;AND NOTHING ELSE
MOVEM TT,FVTEM2 ;SAVE IN NON-REGISTER
DATAO PAG,[1B0+6B8] ;SWITCH TO AC BLOCK 6
DMOVEM 2,FVTEM3 ;READ CST AND SPT BASE
DATAO PAG,FVTEM2 ;SWITCH BACK TO OLD ACS
JRST FVSPT9 ;TRANSLATE TO VIRTUAL ADDRESS
;CONTINUED ON NEXT PAGE
;STILL IFE FTFILE & IFN FTEXEC
;CONTINUED FROM PREVIOUS PAGE
FVSPT4: SKPKS ;ON A KS-10?
HALT ERR ;NO???
RDCSB FVTEM3 ;READ CST BASE ADDRESS
RDSPB FVTEM4 ;AND SPT BASE ADDRESS
FVSPT9: MOVE TT,FVTEM1 ;RETRIEVE CST/SPT FLAG
MOVE TT,FVTEM3(TT) ;GET APPROPRIATE BASE ADDRESS
PUSHJ P,SAVR ;NEED ANOTHER AC
MOVEI R,PAGMSK ;WORD-WITHIN-PAGE MASK
AND R,TT ;GET WORD OFFSET WITHIN PAGE
PUSH P,T ;SAVE GUESS FOR A SEC
ANDI T,PAGMSK ;GET IN-PAGE PART OF GUESS
CAME T,R ;SAME AS IN-PAGE PART OF PHY ADR?
SETOM (P) ;NO, GUESS IS BOGUS
POP P,T ;GET BACK REVISED GUESS
ASH T,WRD2PG ;MAKE GUESS A PAGE NUMBER (PRESERVE -1)
LSH TT,WRD2PG ;PHY PAGE OF BASE OF CST/SPT
PUSHJ P,FPVPG0 ;FIND CORRESPONDING VIRTUAL ADDRESS
POPJ P, ;NOT MAPPED, DIE
LSH TT,PG2WRD ;VIRTUAL WORD ADDRESS OF BASE PAGE
ADD TT,R ;VIRTUAL ADRESS OF BASE OF CST/SPT
JRST CPOPJ1 ;SUCCESSFUL RETURN
> ;END IFN FTEXEC
> ;END IFE FTFILE
IFE FTFILE,<
IFN FTEXEC,<
;FPVPG -- FIND PHYSICAL TO VIRTUAL PAGE CORRESPONDENCE
;CALL IS:
;
; MOVX TT,<PHYSICAL PAGE NUMBER>
; MOVX T,<VIRTUAL PAGE GUESS OR -1> ;OPTIONAL
; PUSHJ P,FPVPG/FPVPG0 ;FPVPG0 IF GUESS SUPPLIED
; ERROR RETURN
; NORMAL RETURN
;
;WHERE <PHYSICAL PAGE NUMBER> IS THE PHYSICAL MEMORY PAGE NUMBER (E.G.,
;THE EPT) FOR WHICH AN EXEC VIRTUAL PAGE NUMBER IS DESIRED, AND
;<VIRTUAL PAGE GUESS> IS A PROBABLE VIRTUAL CORRESPONDENCE (OR -1 FOR
;NO GUESS). IF -1 IS GIVEN, A ONE-TO-ONE VIRTUAL/PHYSICAL MAPPING WILL
;BE TRIED.
;
;THE ERROR RETURN IS TAKEN IF THE SPECIFIED PHYSICAL PAGE NUMBER IS
;NOT MAPPED INTO THE EXEC VIRTUAL ADDRESS SPACE.
;
;THE NORMAL RETURN IS TAKEN WITH REGISTER TT CONTAINING THE EXEC VIRTUAL
;PAGE NUMBER WHICH IS MAPPED INTO THE SPECIFIED PHYSICAL PAGE.
;
;PRESERVES ALL ACS.
FPVPG: PUSHJ P,SAVT ;DON'T BOMB T
SETO T, ; 'CAUSE IT COULD BE ANYTHING
FPVPG0: SKPKA ;KA-10?
PUSHJ P,OKPAG ;NO, ON A MAPPING MACHINE, PAGING ON?
JRST CPOPJ1 ;VIRTUAL AND PHYSICAL EQUIVILENT
PUSH P,TT1 ;SAVE SOME ACS
PUSH P,TT2 ; . . .
SKIPG T ;REASONABLE GUESS GIVEN?
MOVE T,TT ;NO, TRY ONE-TO-ONE MAPPING
LSH T,PG2WRD ;MAP WANTS ADDRESS, NOT PAGE
MOVEI TT1,777777 ;MAX VIRTUAL ADDRESS IN SEC. 0
SKPS0 ;EXTENDED KL?
HRLI TT1,37 ;YES, 37 SECTION LIMIT
PUSH P,TT1 ;SAVE UPPER LIMIT
MOVX TT1,777-PAGSIZ ;STARTING POINT, PAGE "-1"
SKPNKI ;KI-10?
JRST FPVP10 ;YES
SKPKLS ;KL-10 OR A KS-10?
CAIA ;NO
JRST FPVP20 ;YES
HALT CPOPJ ;UNKNOWN PROCESSOR TYPE
;STILL IN IFE FTFILE & IFN FTEXEC
;HANDLE KI-10 PAGING
FPVP10: MAP TT2,(T) ;MAP VIRTUAL ADDRESS OF GUESS
CAIA ;DON'T LOSE THE DATA
FPVP12: MAP TT2,0(TT1) ;MAP VIRTUAL ADDRESS
TXNE TT2,1B18 ;PAGE BOX PAGE FAILURE?
JRST FPVP16 ;YES, FORGET THIS VIRTUAL PAGE
ANDI TT2,17777 ;NO, REDUCE TO JUST PAGE NUMBER
CAME TT2,TT ;THIS THE DESIRED PAGE?
JRST FPVP16 ;NO
FPVP14: SKIPG TT,TT1 ;YES, EXEC VIRTUAL ADDRESS IS HERE
MOVE TT,T ;OR MAYBE HERE
LSH TT,WRD2PG ;MAKE INTO PAGE ADDRESS
AOS -3(P) ;TAKE SUCCESSFUL RETURN
JRST FPVP18 ;GO RETURN
FPVP16: ADDI TT1,PAGSIZ ;NEXT VIRTUAL PAGE
CAMG TT1,0(P) ;PASSED MAXIMUM ADDRESS YET?
JRST FPVP12 ;NOT YET
FPVP18: POP P,TT2 ;POP GARBAGE WORD
POP P,TT2 ;RESTORE TT2
POP P,TT1 ;RESTORE TT1
POPJ P, ;RETURN AS APPROPRIATE
;HANDLE KL-10 OR KS-10
FPVP20: MAP TT2,@T ;MAP VIRTUAL ADDRESS OF GUESS
CAIA ;DON'T LOSE THE DATA
FPVP22: MAP TT2,@TT1 ;MAP EXEC VIRTUAL ADDRESS
TXNN TT2,TWHPFF ;PAGE FAIL?
TXNN TT2,TWVALD ;ACCESSIBLE?
JRST FPVP26 ;NO
LSH TT2,WRD2PG ;YES, MAKE INTO PAGE NUMBER
ANDI TT2,17777 ;AND NUTHING BUT PAGE NUMBER
CAMN TT2,TT ;THIS THE DESIRED PHYSICAL PAGE?
JRST FPVP14 ;YES
FPVP26: ADDI TT1,PAGSIZ ;ADVANCE TO NEXT PAGE
CAMG TT1,0(P) ;REACHED LIMIT YET?
JRST FPVP22 ;NOT YET
JRST FPVP18 ;YES, ERROR RETURN - NOT MAPPED
> ;END IFN FTEXEC
> ;END IFE FTFILE
IFE FTFILE,<
IFN FTEXEC,<
;CLRAM -- CLEAR THE [PAGING] ASSOCIATIVE MEMORY
;CALL IS:
;
; PUSHJ P,CLRAM
; RETURN
;
;ON RETURN THE ASSOCIATIVE MEMORY FOR THE PAGING SYSTEM HAS BEEN
;RESET (CLEARED).
;
;USES TT1, ALL OTHER ACS PRESERVED
CLRAM: SETOM LASTPG ;FORGET LAST PAGE ACCESS
SKPNKA ;ON A KA?
POPJ P, ;ABOUT AS EASY AS THEY COME
;LOOK FOR A KI-10
SKPKI ;ON A KI-10?
JRST CLRAM2 ;NO
DATAI PAG,TT1 ;GET CURRENT EPT
TRO TT1,400000 ;SET AS NEW EPT
DATAO PAG,TT1 ;CLEARING THE ASSOCIATIVE MEMORY
POPJ P, ;DONE
;LOOK FOR A KL-10 OR A KS-10
CLRAM2: SKPKLS ;ON A KL-10 OR A KS-10?
JRST CLRAM4 ;NO
CONI PAG,TT1 ;GET EPT
CONO PAG,(TT1) ;CLEAR "ASSOCIATIVE" MEMORY
POPJ P, ;RETURN
;UNKNOWN PROCESSOR TYPE
CLRAM4: HALT ERR ;DIE
> ;END IFN FTEXEC
> ;END IFE FTFILE
IFE FTFILE,<
IFN FTEXEC,<
;SELAC -- SELECT DIFFERENT AC BLOCK
;CALL IS:
;
; MOVX W2,<ACBLK>
; PUSHJ P,SELAC
; ERROR RETURN
; NORMAL RETURN
;
;WHERE <ACBLK> IS THE AC BLOCK NUMBER DESIRED.
;
;THE ERROR RETURN IS TAKEN IF THE AC BLOCK NUMBER IS OUT OF RANGE
;OR IF RUNNING ON A KA-10 OR KI-10; OTHERWISE THE NORMAL RETURN
;IS TAKEN WITH AC0 TO AC0+17 LOADED WITH THE NEW ACS AND DDT'S
;ACS LOADED IN THE NEW HARDWARE AC BLOCK. IF PHYSICAL ADDRESSING
;IS CURRENTLY ENABLED THEN VIRTUAL ADDRESSING IS RE-ESTABLISHED.
;
;USES W1 AND W2.
SELAC: SKPKA ;ON A KA-10?
SKPNKI ;OR A KI-10?
POPJ P, ;YES, LOSES
;LOOK FOR A KL-10 OR A KS-10 PROCESSOR
SKPKLS ;ON A KL-10 OR A KS-10?
JRST SELAC4 ;NO
CAILE W2,7 ;MUST BE 0 .LE. <ACBLK> .LE. 7
POPJ P, ;ILLEGAL AC BLOCK NUMBER
LSH W2,<^D35-^D8> ;POSITION FOR DATAO
DATAI PAG,W1 ;READ CURRENT AC BLOCK NUMBER
TXO W1,1B0 ;FLAG TO SET AC BLOCK
TXZ W1,1B1!1B2 ;BUT NOTHING ELSE (UPT, ETC)
SKIPN ACWRD ;BEEN HERE BEFORE?
MOVEM W1,ACWRD ;NO, REMEMBER ORIGINAL AC BLOCK
TXZ W1,7B8 ;CLEAR OUT CURRENT AC BLOCK FIELD
IOR W1,W2 ;SET NEW CURRENT AC BLOCK FIELD
MOVEM W1,TEM ;SAVE AWAY WHERE WE CAN FIND IT AGAIN
JSR SWAP ;RESTORE ACS TO HARDWARE AC BLOCK
DATAO PAG,TEM ;SELECT NEW AC BLOCK
JRST SELAC9 ;CLEAN UP AND RETURN
;STILL IFE FTFILE & IFN FTEXEC
;UNKNOWN PROCESSOR TYPE
SELAC4: HALT ERR ;UNKNOWN PROCESSOR TYPE
;COMMON EXIT FROM SELAC
SELAC9: JSR SWAP ;RESTORE DDT ACS
SETOM FAKEAC ;FLAG AGAIN USING FAKE ACS
SKIPGE MAPFN ;VIRTUAL ADDRESSING?
SETZM MAPFN ;PHYSICAL - RESET TO VIRTUAL
JRST RET ;ALL DONE
> ;END OF IFN FTEXEC
> ;END OF IFE FTFILE
IFE FTFILE,<
;RSTAC -- RESTORE AC BLOCK CONTEXT TO PRE-DDT ENTRY
;CALL IS:
;
; PUSHJ P,RSTAC
; RETURN
;
;IF NO $$U COMMAND HAS BEEN ISSUED OR IF USER MODE THEN SIMPLY
;SO NOTHING AND RETURN, ELSE RESTORE MACHINE TO AC BLOCK IN USE
;PREVIOUS TO THE FIRST $$NU COMMAND ISSUED SINCE LAST DDT ENTRY
;(E.G., FROM A BREAKPOINT). CALLED FROM $G, $P, AND $X COMMANDS.
;
;PRESERVES ALL [DDT] ACS
RSTAC: SETZM MAPFN
SETOM FAKEAC
SETZM UBASE ;RESET $U
EXCH T,UPROT ;SAVE T
HRLOI T,377777 ;SET T TO LARGEST POSITIVE INTEGER
EXCH T,UPROT ;SET UPROT TO THIS VALUE
IFN FTEXEC,<
SKIPE ACWRD ;HAS USER $$NU'ED?
SKPEXC ;WHILE IN EXEC MODE?
POPJ P, ;NO, JUST RETURN HARMLESSLY
SKPKA ;YES, ON A KA-10?
SKPNKI ;OR A KI-10?
POPJ P, ;YES (SHOULD NEVER GET HERE)
;HANDLE KL-10 OR A KS-10 PROCESSOR
SKPKLS ;ON A KL-10 OR A KS-10 PROCESSOR?
JRST RSTAC4 ;NO
JSR SWAP ;RESTORE HARDWARE ACS
DATAO PAG,ACWRD ;RETURN TO PRE-DDT AC BLOCK
JRST RSTAC9 ;COMMON EXIT CODE
;UNKNOWN PROCESSOR
RSTAC4: HALT ERR ;UNKNOWN PROCESSOR
;COMMON EXIT FROM RSTAC
RSTAC9: JSR SWAP ;RESTORE DDT ACS
SETZM ACWRD ;FLAG WE'VE DONE WHAT WE JUST DID
> ;END OF IFN FTEXEC
POPJ P, ;AND RETURN
> ;END OF IFE FTFILE
IFN FTEXEC,<
;DOXBLT -- SUBROUTINE TO DO A BLT OR AN XBLT
;CALL:
; TT/ COUNT
; TT1/ FIRST SOURCE
; TT2/ FIRST DEST
; PUSHJ P,DOXBLT
; ERROR
; OK
;
;ASSUMES ADDRESSES ARE LEGAL, FAILS ONLY IF CAN'T GET TO THEM
;BECAUSE THEY ARE IN NON-ZERO SECTION AND DDT ISN'T.
;DESTROYS TT,TT1,TT2.
DOXBLT: SKPNS0 ;XBLT AVAILABLE?
JRST DOXBL2 ;NO, GO USE BLT IF POSSIBLE
EXTEND TT,[XBLT] ;COPY THE DATA
JRST CPOPJ1 ;DONE
;HERE TO TRY USING A BLT, IF EVERYTHING IS IN SECTION 0.
DOXBL2: JUMPLE TT,CPOPJ ;BACKWARDS BLTS DON'T WORK
TLNN TT1,-1 ;SOURCE IN 0?
TLNE TT2,-1 ;DEST IN 0?
POPJ P, ;SOMETHING NOT IN SECTION 0
ADD TT,TT2 ;FORM LAST+1 IN TT
SUBI TT,1 ;GET LAST
TLNE TT,-1 ;CROSS SECTION 0 END?
POPJ P, ;YES, ERROR
HRL TT2,TT1 ;SOURCE,,DEST
BLT TT2,(TT) ;COPY THE DATA
JRST CPOPJ1 ;ALL DONE
> ;END IFN FTEXEC
SUBTTL PRESERVATION ROUTINES
;SAVR -- PRESERVE "R"
SAVR: PUSH P,R ;SAVE R ON STACK
PUSHJ P,@-1(P) ;"RETURN" TO CALLER
SOS -2(P) ;NON-SKIP RETURN
POP P,R ;RESTORE REGISTER
POP P,(P) ;CLEAN UP STACK
AOS (P) ;SKIP RETURN (UNLESS SOS'ED ABOVE)
POPJ P, ;RETURN WITH PRESERVED R
;SAVT -- PRESERVE "T"
SAVT: PUSH P,T ;SAVE T ON STACK
PUSHJ P,@-1(P) ;"RETURN" TO CALLER
SOS -2(P) ;NON-SKIP RETURN
POP P,T ;RESTORE T
POP P,(P) ;CLEAN UP STACK
AOS (P) ;SKIP RETURN (UNLESS SOS'ED ABOVE)
POPJ P, ;RETURN WITH PRESERVED R
;SAVRST -- PRESERVE "R", "S", "T"
SAVRST: PUSH P,R ;SAVE R ON STACK
PUSH P,S ;SAVE S ON STACK
PUSH P,T ;SAVE T ON STACK
PUSHJ P,@-3(P) ;"RETURN" TO CALLER
SOS -4(P) ;NON-SKIP RETURN
POP P,T ;RESTORE T
POP P,S ;RESTORE S
POP P,R ;RESTORE R
POP P,(P) ;DUMP JUNK
AOS (P) ;SKIP RETURN (UNLESS SOS'ED ABOVE)
POPJ P, ;RETURN WITH PRESERVED R, S, AND T
IFN FTDEC20,< ;T1 - T4 ONLY FOR TOPS-20
;SAVT4 -- PRESERVE "T1", "T2", "T3", "T4"
SAVT4: PUSH P,T1 ;SAVE T1 ON STACK
PUSH P,T2 ;SAVE T2 ON STACK
PUSH P,T3 ;SAVE T3 ON STACK
PUSH P,T4 ;SAVE T4 ON STACK
PUSHJ P,@-4(P) ;"RETURN" TO CALLER
SOS -5(P) ;NON-SKIP RETURN
POP P,T4 ;RESTORE T4
POP P,T3 ;RESTORE T3
POP P,T2 ;RESTORE T2
POP P,T1 ;RESTORE T1
POP P,(P) ;DUMP JUNK
AOS (P) ;SKIP RETURN (UNLESS SOS'ED ABOVE)
POPJ P, ;RETURN WITH PRESERVED T1, T2, T3, AND T4
> ;END OF IFN FTDEC20
IFN FTEXEC,<
;SAVFL -- PRESERVE PC FLAGS
SAVFL: PUSH P,T ;NEED A TEMP AC
JSP T,.+1 ;GET SECTION 0 FLAGS
EXCH T,0(P) ;SAVE FLAGS, RESTORE T
SKPS0 ;DID WE PUT ANY FLAGS ON THE STACK?
XSFM 0(P) ;NO, PUT THEM THERE
PUSHJ P,@-1(P) ;CALL CALLER
SOS -2(P) ;NON-SKIP RETURN
EXCH T,0(P) ;TEMP AC AGAIN
MOVEM T,SATEM1 ;STORE FLAGS FOR (X)JRSTF
XMOVEI T,SAVFL8 ;WHERE THE JRST SHOULD GO
SKPNS0 ;WANT FLAGS IN SAME WORD?
HLL T,SATEM1 ;YES
MOVEM T,SATEM2 ;STORE PC OR FLAGS,,PC
SKPNS0 ;WHICH JRSTF TO DO?
JRSTF @SATEM2 ;OLD STYLE
XJRSTF SATEM1 ;NEW
SAVFL8: POP P,T ;RESTORE TEMP AC
POP P,0(P) ;DUMP JUNK RETURN ADDRESS
JRST CPOPJ1 ;RETURN TO CALLER'S CALLER
> ;END IFN FTEXEC
;PCAFI -- ROUTINE TO SUPPRESS ADDRESS BREAK
;PZAFI -- ROUTINE TO SUPPRESS ADDRESS BREAK, HANDLING NZS REFERENCES
;CALL IS:
;
; JSP TT2,PCAFI/PZAFI
; INSTR
;
;THIS ROUTINE WILL RETURN TO "INSTR" WITH ADDRESS BREAK INHIBIT SET
;SO THAT THE INSTRUCTION WILL NOT CAUSE AN ADDRESS BREAK.
;
;IF PZAFI IS CALLED IN SECTION ZERO, AND AC "R" REFERENCES A NON-ZERO
;ADDRESS, IT WILL PUT <INSTR> INTO THE SECTION 1 ACS TO BE EXECUTED.
;
;USED PRIMARILY BY FETCH AND STORE LOGIC.
;
;REGISTER R IS PRESUMED TO CONTAIN THE ADDRESS TO BE REFERENCED.
;
;<INSTR> MAY ***NOT*** REFERENCE TT1, TT2, OR TT3, NOR MAY IT EVER SKIP!!
;
;DESTROYS TT1, TT2, TT3
PZAFI: TLNE R,-1 ;NON-ZERO-SECTION ADDRESS?
SKPS0 ;AND LOOKING FROM SECTION ZERO?
PJRST PCAFI ;NO, PRETEND WE'RE <JSP TT2,PCAFI>
XSFM TT1 ;GET CURRENT PC FLAGS/PCS/ETC.
TXO TT1,PC$AFI ;SET ADDRESS-FAIL-INHIBIT PC FLAG
MOVEM TT1,NZSXJF ;SET XJRSTF PC FLAGS
MOVE TT1,[1,,TT1] ;SECTION-1 PC (IN THE ACS)
MOVEM TT1,NZSXJF+1 ;SET XJRSTF PC ADDRESS
MOVE TT1,0(TT2) ;FETCH <INSTR> TO BE EXECUTED IN NZS SPACE
HRRZI TT3,1(TT2) ;SET INCREMENTED (SECTION-0) RETURN ADDRESS
MOVE TT2,[XJRST TT3] ;SET UP RETURN INSTRUCTION
XJRSTF NZSXJF ;NOW JUMP INTO SECTION 1 ACS
PCAFI: SKPS0 ;IN NON-ZERO SECTION?
JRST PCAFI1 ;YES, DIFFERENT CODE
TXO TT2,PC$AFI ;SET ADDRESS FAILURE INHIBIT
JRSTF (TT2) ;AND RETURN ALLOWING ONE INSTRUCTION TO
; EXECUTE FREE OF ADDRESS BREAK
PCAFI1: XSFM TT1 ;MUST EXPLICITLY READ PC FLAGS
TXO TT1,PC$AFI ;SET ADDRESS FAILURE INHIBIT
XJRSTF TT1 ;AND RETURN ALLOWING ONE INSTRUCTION TO
; EXECUTE FREE OF ADDRESS BREAK
SUBTTL TELETYPE IO LOGIC -- DEFINITIONS
IFN FTEXEC,<
;KL10 TELETYPE I/O DEFINITIONS (DTE AND PROTOCOLS)
DTE==200
DTEII=142 ;DTE20 INTERRUPT INST
DTEUNS=143 ;UNUSED
DTEEPW=144 ;EXAMINE PROTECTION WORD
DTEERW=145 ;EXAMINE RELOCATION WORD
DTEDPW=146 ;DEPOSIT PROTECTION WORD
DTEDRW=147 ;DEPOSIT RELOCATION WORD
DTEFLG=444
DTEF11=450
DTECMD=451
DTEMTD=455
DTEMTI=456
.DTMTO==10B27
.DTMMC==11B27
.DTNMC==12B27
DTEN==4 ;MAX NUMBER OF DTE'S
TO11DB==1B22 ;TO 11 DOORBELL
CL11PT==1B26 ;CLEAR TO 10 DOORBELL
PI0ENB==1B32 ;PI CHANNEL 0 ENABLE
PIENB==1B31 ;ENABLE PI SETTING
DTERES==1B20 ;RESTRICTED BIT
;STILL IFN FTEXEC
;KL10 APR INTERNAL CLOCK SERVICE DEFINITIONS
;CONI/CONO MTR,
MTR==024 ;DEVICE CODE
MTRLOD==1B18 ;LOAD BITS 21-23
; 19-20 ;UNUSED, MBZ
MTREPA==1B21 ;ENABLE EXEC PI ACCOUNTING
MTRENA==1B22 ;ENABLE EXEC NON-PI ACCOUNTING
MTRAMN==1B23 ;ACCOUNTING METERS ON
MTRTBF==1B24 ;TIME BASE OFF
MTRTBN==1B25 ;TIME BASE ON
MTRCTB==1B26 ;CLEAR TIME BASE
; 27-32 ;UNUSED, MBZ
MTRPIA==7B35 ;PI ASSIGNMENT
;CONI/CONO TIM
TIM==020 ;DEVICE ASSIGNMENT
TIMCIC==1B18 ;CLEAR INTERVAL COUNTER
; 19-20 ;UNUSED, MBZ
TIMITO==1B21 ;INTERVAL TIMER ON
TIMDON==1B22 ;DONE/CLEAR DONE
TIMICO==1B23 ;COUNTER OVERFLOW
;STILL IFN FTEXEC
;KS10 TELETYPE I/O DEFINITIONS
RLWORD==31 ;RELOAD CONTROL WORD
KPACT==1B5 ;KEEP-ALIVE ACTIVE BIT
CTYIWD==32 ;CTY INPUT WORD
CTYIRD==400 ;CTY INPUT READY FLAG
CTYOWD==33 ;CTY OUTPUT WORD
CTYORD==400 ;CTY OUTPUT READY FLAG
INT80==1B23!1B25 ;INTERRUPT 8080
> ;END IFN FTEXEC
SUBTTL TELETYPE IO LOGIC -- INPUT ROUTINES
;TIN -- ROUTINE TO READ THE NEXT INPUT CHARACTER
;CALL:
; PUSHJ P,TIN
;
;RETURNS +1 WITH NEXT CHARACTER IN T.
TIN: SOSGE CHINC ;CHARACTER LEFT IN LINE BUFFER?
JRST CHIN1 ;NO, GO REFILL BUFFER
ILDB T,CHINP ;GET CHARACTER
POPJ P, ;RETURN WITH CHARACTER IN T
;REFILL LINE BUFFER WITH EDITING
IFN FTDEC20,<
CHIN1:
IFN FTEXEC,<
SKPUSR ;EXEC MODE?
JRST XCHIN1 ;YES, USE SIMULATION ROUTINES
> ;END IFN FTEXEC
SKIPE T1,CHINP ;REINIT LINE?
JRST CHIN2 ;NO
MOVEI T1,NLINBF*5 ;YES, SETUP MAX CHAR COUNT
MOVEM T1,LINSPC
MOVE T1,LINBP ;SETUP POINTER
MOVEM T1,CHINP
CHIN2: MOVEM T1,TEXTIB+.RDBKL ;SET BACKUP LIMIT
SKIPG LINSPC ;ROOM LEFT IN BUFFER?
JRST ERR ;NO, TOO MUCH TYPIN
SETZ T1,
SKIPE WAKALL ;WAKEUP ON EVERYTHING?
XMOVEI T1,ONES4 ;YES, USE WAKEUP TABLE
MOVEM T1,ETXTB
PUSH P,LINSPC ;SAVE CURRENT SPACE
PUSH P,CHINP ;AND POINTER
XMOVEI T1,TEXTIB ;POINT TO ARG BLOCK
TEXTI% ;INPUT TO NEXT BREAK CHAR
JRST ERR ;BAD ARGS (IMPOSSIBLE)
POP P,CHINP ;RESTORE POINTER TO CHARS JUST TYPED
MOVE T1,TEXTIB+.RDFLG ;GET FLAGS
TXNE T1,RD%BFE+RD%BLR ;DELETIONS?
JRST CHIN3 ;YES
POP P,T1 ;RECOVER OLD SPACE COUNT
SUB T1,LINSPC ;COMPUTE NUMBER CHARS JUST TYPED
MOVEM T1,CHINC ;SETUP COUNT
JRST TIN ;GO RETURN NEXT CHAR
;USER HAS DELETED BACK INTO TEXT ALREADY PROCESSED, THEREFORE
;LINE MUST BE REPROCESSED FROM BEGINNING. POSSIBLY ALL TEXT HAS BEEN
;DELETED.
CHIN3: MOVEI T1,NLINBF*5 ;COMPUTE NUMBER CHARS NOW IN LINE
SUB T1,LINSPC
JUMPE T1,WRONG ;JUMP IF WHOLE LINE DELETED
MOVEM T1,CHINC ;LINE NOT NULL, SETUP CHAR COUNT
MOVE T1,LINBP ;REINIT POINTER
MOVEM T1,CHINP
MOVE T1,[SCHR,,SCH] ;RESTORE TYPEOUT MODES
BLT T1,ODF ; . . .
JRST DD2 ;CLEAR WORLD AND REDO LINE
> ;END IFN FTDEC20
IFN FTDEC10!FTEXEC,<
IFNDEF T1,<
T1==A
PURGT1==-1
> ;END IFNDEF
IFN FTDEC10,<
CHIN1:>
XCHIN1: SKIPE T1,CHINP ;REINIT LINE?
JRST XCHIN2 ;NO
MOVEI T1,NLINBF*5 ;YES, SETUP MAX CHAR COUNT
MOVEM T1,LINSPC
MOVE T1,LINBP ;SETUP POINTER
MOVEM T1,CHINP
XCHIN2: MOVEM T1,LINDB ;SET BEGINNING OF DELETE BUFFER
SKIPG LINSPC ;ROOM LEFT IN BUFFER?
JRST ERR ;NO, TOO MUCH TYPIN
MOVEI T1,LINBP-TEXTIB ;SIZE OF BLOCK
SKIPE WAKALL ;WAKEUP ON EVERYTHING?
MOVEI T1,ETXTB-TEXTIB ;YES, INCLUDE WAKEUP TABLE
MOVEM T1,TEXTIB ;SET SIZE IN BLOCK
PUSH P,LINSPC ;SAVE CURRENT SPACE
PUSH P,CHINP ;AND POINTER
MOVEI T1,TEXTIB ;POINT TO ARG BLOCK
PUSHJ P,TXTI
JRST ERR ;BAD ARGS (IMPOSSIBLE)
POP P,CHINP ;RESTORE POINTER TO CHARS JUST TYPED
POP P,T1 ;RECOVER OLD SPACE COUNT
IFN FTYANK,<
AOSN PTDFLG ;EOF ON COMMAND FILE
JRST [ SETZM CHINC
SETZM CHINP
JRST DD2] ;GET BACK TO TOP LEVEL
> ;END FTYANK
SKIPN 0(P) ;REPROCESS NEEDED?
JRST [ MOVEI T1,NLINBF*5
SUB T1,LINSPC ;YES, COMPUTE NUMBER CHARS IN LINE
JUMPE T1,WRONG ;JUMP IF WHOLE LINE DELETED
MOVEM T1,CHINC ;LINE NOT NULL, SETUP CHAR COUNT
MOVE T1,LINBP ;REINIT POINTER
MOVEM T1,CHINP
MOVE T1,[SCHR,,SCH] ;RESTORE TYPEOUT ETC. MODES
BLT T1,ODF ; . . .
JRST DD2] ;CLEAR WORLD AND REDO LINE
SUB T1,LINSPC ;COMPUTE NUMBER CHARS JUST TYPED
JUMPG T1,[MOVEM T1,CHINC ;SETUP COUNT
JRST TIN] ;GO RETURN NEXT CHAR
;CONTINUED ON NEXT PAGE
;STILL IFN FTDEC10!FTEXEC
;USER HAS DELETED BACK INTO TEXT ALREADY PROCESSED, THEREFORE LINE
;MUST BE REPROCESSED FROM BEGINNING. POSSIBLY ALL TEXT HAS BEEN
;DELETED.
PUSHJ P,RDBKIN
SETZM 0(P) ;REQUEST REPROCESS OF LINE
MOVE T1,LINBP ;RESET DELETE BOUNDARY TO BEGINNING OF LINE
JRST XCHIN2
IFDEF PURGT1,<IFL PURGT1,< PURGE PURGT1,T1>>
;STILL IFN FTDEC10!FTEXEC
SUBTTL TELETYPE IO LOGIC -- LINE BUFFERING ROUTINES
TXTI:
DOTXTI: PUSH P,A ;SAVE ALL ACS USED
PUSH P,B
PUSH P,C
PUSH P,T
PUSH P,W1
PUSH P,W2
MOVE W1,LINSPC ;COUNT OF BYTES IN DESTINATION
SKIPN W2,LINDB ;WAS IT NON-ZERO?
MOVE W2,CHINP ;NO. USE DEFAULT
; VERIFY ALL OF THE STRING POINTERS
RDTXT1: MOVE A,CHINP ;HAVE A DEST POINTER?
PUSHJ P,RDCBP ;YES. CHECK IT OUT
MOVEM A,CHINP ;GET CONVERTED POINTER
SKIPN A,LINBP ;HAVE A ^R BUFFER?
JRST RDTOPM ;NO. GO AROUND THEN
PUSHJ P,RDCBP ;YES. VERIFY IT
MOVEM A,LINBP ;STORE VERIFIED POINTER
RDTOPM: MOVE A,W2 ;GET TOP OF BUFFER
PUSHJ P,RDCBP ;VERIFY IT
MOVE W2,A ;ALL VERIFIED NOW
JUMPLE W1,WRAP0 ;MAKE SURE COUNT HAS ROOM IN IT
;CONTINUED ON NEXT PAGE
;STILL IFN FTDEC10!FTEXEC
;CONTINUED FROM PREVIOUS PAGE
;MAIN LOOP - DOES INPUT OF BYTE AND DISPATCH ON CHARACTER CLASS
;ACTION ROUTINES EXIT TO:
; INSRT - APPEND CHARACTER AND CONTINUE
; NINSRT - CONTINUE WITHOUT APPENDING CHARACTER
; DING - BUFFER NOW EMPTY, POSSIBLE RETURN TO USER
; WRAP, WRAP0 - RETURNS TO USER
NINSRT: MOVEM W1,LINSPC ;STORE COUNT
PUSHJ P,RDBIN ;DO BIN
MOVE A,B ;SAVE BYTE
IDIVI B,CHRWRD ;SETUP TO GET CHAR CLASS
LDB B,CCBTAB(C) ;GET IT FROM BYTE TABLE
IDIVI B,2 ;SETUP TO REF DISPATCH TABLE
JUMPE C,[HLRZ T,DISPTC(B) ;GET LH ENTRY
JRST .+2]
HRRZ T,DISPTC(B) ;GET RH ENTRY
MOVE B,A ;ROUTINES GET BYTE IN B
JRST 0(T) ;DISPATCH TO ACTION ROUTINE
;RETURN FROM ACTION ROUTINE TO APPEND CHARACTER AND CONTINUE.
; B/ CHARACTER
INSRT: SKIPE WAKALL ;BREAK ON EVERYTHING?
JRST WRAP ;YES. WRAP IT UP THEN
IDPB B,CHINP ;APPEND BYTE TO USER STRING
SOJG W1,NINSRT ;CONTINUE IF STILL HAVE COUNT
JRST WRAP0 ;COUNT EXHAUSTED, RETURN
;STILL IFN FTDEC10!FTEXEC
;RETURNS TO USER.
;RETURN TO USER IF BUFFER EMPTY
NDING: CAME W2,CHINP ;BUFFER EMPTY?
JRST NINSRT ;NO, GO GET MORE INPUT
JRST WRAP0
;APPEND LAST CHARACTER AND RETURN
WRAP: IDPB B,CHINP ;APPEND BYTE
SUBI W1,1 ;UPDATE COUNT
;STORE NULL ON STRING AND RETURN
WRAP0: JUMPLE W1,WRAP1 ;DON'T STORE NULL IF COUNT EXHAUSTED
SETZ B,
MOVE A,CHINP
IDPB B,A ;STORE NULL WITHOUT CHANGING USER PTR
;UPDATE USER VARIABLES AND RETURN
WRAP1: MOVEM W1,LINSPC ;UPDATE USER'S BYTE COUNT
POP P,W2
POP P,W1
POP P,T
POP P,C
POP P,B
POP P,A
JRST CPOPJ1
;STILL IFN FTDEC10!FTEXEC
;PARAMETERS FOR CLASS TABLE
CCBITS==4 ;BITS/BYTE
CHRWRD==^D36/CCBITS ;BYTES/WORD
;DEFINED CHARACTER CLASSES:
TOP==0 ;TOPS10 BREAK
BRK==1 ;REGULAR BREAK SET
ZER==2 ;NULL
EOLC==3 ;EOL
PUN==4 ;PUNCTUATION
SAFE==5 ;ALL OTHERS
RUBO==6 ;DELETE A CHARACTER
RTYP==7 ;RETYPE THE LINE
KLL==10 ;DELETE THE LINE
KWRD==11 ;DELETE A WORD
RDCRC==12 ;CARRIAGE RETURN
RDQTC==13 ;QUOTE CHARACTER
;STILL IFN FTDEC10!FTEXEC
;TABLE OF BYTE PTRS TO REFERENCE CLASS TABLE
XX==CCBITS-1
XALL
CCBTAB: REPEAT CHRWRD,<
POINT CCBITS,CTBL(B),XX
XX=XX+CCBITS
> ;END REPEAT
SALL
;CLASS DISPATCH TABLE
DISPTC: WRAP,,WRAP
ZNULL,,EOL1
WRAP,,INSRT
DELC,,RTYPE
DELL,,DELW
RDCR,,RDQT
;STILL IFN FTDEC10!FTEXEC
;CHARACTER CLASS TABLE
DEFINE CCN (A,B)<
REPEAT B,<
CC1 (A)>>
DEFINE CC1 (C)<
QQ=QQ+CCBITS
IFG QQ-^D35,<
QW
QW=0
QQ=CCBITS-1>
QW=QW+<C>B<QQ>>
QW==0
QQ==-1
CTBL: CC1(ZER) ;0
CCN(PUN,6) ;1-6
CC1(TOP) ;7
CCN(PUN,2) ;10-11
CC1(EOLC) ;12
CC1(PUN) ;VT
CC1(TOP) ;FF
CC1(RDCRC) ;CR
CCN(PUN,4) ;16-21 (^N-^Q)
CC1(RTYP) ;^R
CCN(PUN,2) ;^S,^T
CC1(KLL) ;^U
CC1(RDQTC) ;^V
CC1(KWRD) ;^W
CCN(PUN,2) ;^X,^Y
CCN(BRK,2) ;^Z,$
CCN(PUN,4) ;34-37
CCN(PUN,^D16) ;40-/
CCN(SAFE,^D10) ;0-9
CCN(PUN,7) ;:-@
CCN(SAFE,^D26) ;A-Z
CCN(PUN,6) ;]-140
CCN(SAFE,^D26) ;A-Z
CCN(PUN,4) ;173-176
CC1(RUBO) ;177
QW ;GET LAST WORD IN
;STILL IFN FTDEC10!FTEXEC
;LOCAL ROUTINES TO DO LOGICAL BIN AND BOUT.
RDBIN: SKIPN B,SAVCHR ;WANT TO BACK UP?
JRST RDBIN0 ;NO
SETZM SAVCHR ;ONLY ONCE
POPJ P, ;RETURN
RDBIN0: PUSH P,T ;SAVE T
IFN FTEXEC,<
SKPEXC
JRST RDBIN2 ;USER MODE
;READ AN EXEC-MODE COMMAND CHARACTER
IFN FTYANK,<
SKIPE COMAND
PUSHJ P,XPTRIN
> ;END IFN FTYANK
PUSHJ P,XTIN ;GET A BYTE
MOVE B,T ;PUT IN CORRECT PLACE
JRST RDBIN8 ;EXIT WITH CHARACTER
RDBIN2:
> ;END IFN FTEXEC
;READ A TOPS-10 USER-MODE COMMAND CHARACTER
IFN FTYANK,<
SKIPE COMAND ;COMMAND FILE OPEN?
PUSHJ P,PTRIN ;READ COMMAND FILE
CAIA ;READ FROM TTY
JRST RDBIN6 ;GOT A CHARACTER (ALREADY ECHOED)
MOVEI T," " ;ASSUME EOF
SKIPL PTDFLG ;WAS IT EOF?
> ;END IFN FTYANK
INCHRW T ;READ A BYTE FROM COMMAND TTY
PUSHJ P,TOUT6 ;"ECHO" (COUNT) THE CHARACTER
RDBIN6: MOVE B,T ;COPY BYTE
RDBIN8: POP P,T ;RESTORE T
MOVEM B,LASCHR ;SAVE LAST CHAR READ
POPJ P, ;RETURN
;STILL IFN FTDEC10!FTEXEC
;RDSOUT - OUTPUT STRING ALA ECHOB
; B/ STRING PTR
; PUSHJ P,RDSOUT
; RETURN +1 ALWAYS
RDSOUT: MOVE A,B ;COPY POINTER
PUSHJ P,RDCBP
RDSL: ILDB B,A
JUMPE B,CPOPJ ;EXIT ON NULL
PUSHJ P,ECHOB ;"ECHO" THE CHARACTER
JRST RDSL
;CHECK BYTE POINTER GIVEN AS ARGUMENT
; A/ BYTE POINTER
; PUSHJ P,RDCBP
; RETURN +1: OK, LH INITIALIZED IF NECESSARY
RDCBP: HLRZ B,A ;GET LH
CAIN B,-1 ;IS DEFAULT?
HRLI A,(<POINT 7,0>) ;YES, FILL IN 7-BIT
LDB B,[POINT 6,A,11] ;CHECK BYTE SIZE
CAIGE B,7 ;7 OR GREATER?
HALT . ;BAD BYTE SIZE
IBP A ;INCR IT AND DECR IT ONCE SO WILL
JRST DBP ; BE IN KNOWN STATE FOR COMPARES
;STILL IFN FTDEC10!FTEXEC
;GET TYPEIN CHARACTER - EXEC MODE
IFN FTEXEC,<
XTIN: PUSHJ P,XLISTE ;TELETYPE CHARACTER INPUT
JRST .-1
SETZM TTSUP ;CLEAR ^O SUPPRESSION ON ANY INPUT
JUMPE T,XTIN ;FILTER NULLS
CAIE T,175
CAIN T,176
MOVEI T,.CHESC ;CHANGE ALL ALT MODES TO NEW
CAIE T,.CHDEL ;DON'T ECHO EDIT CHARACTERS
CAIN T,.CHCNU
POPJ P,
CAIE T,.CHCNR
CAIN T,.CHCNW
POPJ P,
CAIN T,.CHTAB ;A <TAB> CHARACTER
TXNE F,TXF ;YES, DON'T ECHO UNLESS TEXT MODE
CAIA ;NOT A <TAB> OR TEXT MODE
POPJ P, ;A <TAB> AND NOT TEXT MODE
CAIN T,.CHCRT ;CR?
JRST [ MOVEI T,.CHLFD ;YES, PRESET LF FOR NEXT TIME
MOVEM T,XNXTCH
MOVEI T,.CHCRT ;ECHO AND RETURN CR NOW
JRST .+1]
PJRST ECHO ;ECHO THE CHARACTER
> ;END IFN FTEXEC
;STILL IFN FTDEC10!FTEXEC
;LOCAL ROUTINES FOR EDITING FUNCTIONS
;DELETE CHARACTER FROM DESTINATION - BACKUP PTR AND CHECK
;FOR TOP OF BUFFER
; PUSHJ P,BACK
; RETURN +1: AT TOP OF BUFFER, NO CHARACTER TO DELETE
; RETURN +2: CHARACTER DELETED
;
;ON SKIP RETURN, AC A HAS OLD BYTE POINTER, AC B HAS CHARACTER
;THAT WAS JUST "DELETED".
BACK: CAMN W2,CHINP ;AT TOP OF BUFFER?
POPJ P, ;YES
MOVE A,CHINP ;GET DEST PTR
PUSHJ P,DBP ;DECREMENT IT
MOVEM A,CHINP ;PUT IT BACK
ILDB B,A ;GET CHARACTER JUST "DELETED"
AOJA W1,CPOPJ1 ;UPDATE COUNT AND RETURN
;PUT BYTE BACK INTO SOURCE
; B/ BYTE
; PUSHJ P,RDBKIN
; RETURN +1 ALWAYS
RDBKIN:
DOBKIN: MOVE A,LASCHR ;GET LAST BYTE READ
MOVEM A,SAVCHR ;MAKE NEXT BYTE READ
POPJ P,
;STILL IFN FTDEC10!FTEXEC
;FIND BEGINNING OF CURRENT LINE.
; PUSHJ P,FNDLIN
; RETURN +1: AT TOP OF BUFFER
; RETURN +2: A/ BACKED-UP BYTE PTR TO BEGINNING OF LINE
; B/ BYTE COUNT CONSISTENT WITH CHINP IN A
FNDLIN: CAMN W2,CHINP ;AT TOP OF BUFFER?
POPJ P, ;YES
PUSH P,CHINP ;SAVE CURRENT LINE VARIABLES
PUSH P,W1
FNDLN1: MOVE A,CHINP ;BACKUP ONE CHARACTER
PUSHJ P,DBP
MOVEM A,CHINP
ADDI W1,1
CAMN W2,CHINP ;NOW AT TOP OF BUFFER?
JRST FNDLN2 ;YES, RETURN
LDB B,CHINP ;NO, LOOK AT NEXT CHAR TO BE DELETED
CAIN B,.CHLFD ;EOL OR LF?
JRST FNDLN2 ;YES, RETURN
JRST FNDLN1 ;NO, KEEP LOOKING
FNDLN2: MOVE A,CHINP ;RETURN NEW LINE VARIABLES
MOVE B,W1
POP P,W1 ;RESTORE OLD LINE VARIABLES
POP P,CHINP
JRST CPOPJ1
;ACTION ROUTINES
;ZERO BYTE
ZNULL: SKIPE WAKALL ;USER HAVE A MASK?
JRST INSRT ;YES. GO SEE ABOUT IT THEN
JRST WRAP0 ;NO. ALWAYS BREAK THEN
;STILL IFN FTDEC10!FTEXEC
;CARRIAGE RETURN - IF LINE FEED FOLLOWS, TREAT LIKE EOL
RDCR: CAIGE W1,2 ;ROOM FOR CR AND LF?
JRST [ PUSHJ P,RDBKIN ;NO, PUT THE CR BACK
JRST WRAP0] ;WILL GET IT NEXT TIME
PUSHJ P,RDBIN ;GET THE NEXT CHAR
CAIN B,.CHLFD ;LF?
JRST RDCR1 ;YES, NORMAL NEWLINE
PUSHJ P,RDBKIN ;NO, PUT BACK THE SECOND BYTE
MOVEI B,.CHCRT ;APPEND A REAL CR
JRST WRAP
RDCR1: MOVEI B,.CHCRT
IDPB B,CHINP ;APPEND CR
SOS W1
RDCR2: MOVEI B,.CHLFD
EOL1: JRST WRAP ;YES
;QUOTE CHARACTER (^V) - INHIBITS EDITING ACTION OF FOLLOWING CHARACTER
RDQT: CAIGE W1,2 ; ROOM FOR BOTH?
JRST [ PUSHJ P,RDBKIN ; NO. BACK UP
JRST WRAP0] ; AND WAIT FOR NEXT TIME
IDPB B,CHINP ;STORE QUOTE
SOS W1 ; ONE LESS
PUSHJ P,RDBIN ;GET THE NEXT CHAR
JRST WRAP ;YES
;STILL IFN FTDEC10!FTEXEC
;DELETE CHARACTER (RUBOUT)
DELC: PUSHJ P,DELCH ;DELETE A CHARACTER
JRST WRAP0 ;NONE TO BE DELETED
JUMPL B,RTYPE ;IF FUNNY CHARACTER FORCE A ^R
JRST NINSRT ;CONTINUE INPUT UNLESS BUFFER EMPTY ETC.
;DELETE WORD (CONTROL-W)
DELW: PUSHJ P,BACK ;DELETE AT LEAST ONE CHARACTER
JRST WRAP0 ;WASN'T ONE
CAIN B,.CHLFD ;LF OR EOL?
JRST BWRD3 ;YES, DON'T DELETE
MOVX T,TT$DEL ;FANCY DELETE HANDLING
IFE FTEXEC,<
TDNN T,TTYMSK ;DO WE HAVE IT?
> ;END IFE FTEXEC
IFN FTEXEC,<
TDNE T,TTYMSK ;DO WE HAVE IT
SKPUSR ;OR ARE WE IN EXEC MODE?
> ;END IFN FTEXEC
JRST BWRD1 ;DON'T WORRY ABOUT ^W ON SCREEN
PUSHJ P,DELCH4 ;WIPE OUT THE "^" CHARACTER
JFCL ;DON'T GET HERE
PUSHJ P,DELCH4 ;WIPE OUT THE "W" CHARACTER
JFCL ;DON'T GET HERE EITHER
MOVE A,CHINP ;GET DELETED BYTE POINTER
IBP A ;RESET A FOR DELCH0
BWRD1: LDB B,A ;GET COPY OF CHARACTER TO BE ZAPPED
PUSHJ P,DELCH0 ;DELETE CHARACTER FROM SCREEN
JFCL ;CAN'T HAPPEN
JUMPL B,RTYPE ;IF (E.G.) TAB THEN FORCE A ^R
PUSHJ P,BACK ;DELETE NEXT CHARACTER
JRST BWRD2 ;NO MORE LEFT
IDIVI B,CHRWRD ;GET ITS CHARACTER CLASS
LDB B,CCBTAB(C)
CAIN B,SAFE ;IS IT A WORD SEPARATOR?
JRST BWRD1 ;KEEP DELETING
BWRD3: IBP CHINP ;YES, KEEP THAT CHARACTER
SUBI W1,1
BWRD2: JRST NINSRT ;CONTINUE INPUT UNLESS BUFFER EMPTY ETC.
;DELETE LINE (CONTROL-U)
DELL: PUSHJ P,FNDLIN ;FIND BEGINNING OF LINE
JRST NDING ;NOTHING IN BUFFER
LDB C,CHINP ;GET LAST CHAR IN BUFFER
MOVEM A,CHINP ;SET LINE VARIABLES TO BEGINNING
MOVEM B,W1
JRST NDING ;CONTINUE INPUT UNLESS BUFFER EMPTY ETC.
;STILL IFN FTDEC10!FTEXEC
;DELCH -- DELETE A CHARACTER FROM BUFFER AND TERMINAL
;CALL IS:
;
; PUSHJ P,DELCH
; EMPTY
; NORMAL
;
;DELCH DELETES THE PREVIOUS INPUT CHARACTER, BOTH INTERNALLY
;(A LA BACK ROUTINE) AND ON THE TERMINAL (HANDLING ANY FANCY
;VIDEO EDITING NEEDED).
;
;DELCH4 CAN BE CALLED TO BLANK OUT THE PREVIOUS CHARACTER ON
;THE SCREEN VIA A <BS><SP><BS> SEQUENCE.
;
;DELCH8 CAN BE CALLED TO OUTPUT A <CR><LF> PAIR.
;
;ON SKIP RETURN AC B HAS THE CHARACTER WHICH WAS JUST DELETED.
DELCH: PUSHJ P,BACK ;BACKUP PTR
POPJ P, ;NOTHING LEFT IN BUFFER
DELCH0: CAIN B,.CHLFD ;WAS IT LF?
JRST DELCH6 ;YES
MOVE T,TTYMSK ;GET FORMAT MASK
TXNE T,TT$DEL ;FANCY <DEL>'S?
JRST DELCH4 ;YES - <BS><SP><BS>
PUSHJ P,ECHOB ;TYPE IT OUT (AND COUNT UP TOHPS)
MOVEI B,"\" ;INDICATE DELETION
PUSHJ P,ECHOB ;COUNT IT TOO
DELCH3: MOVE A,CHINP ;INPUT POINTER
ILDB B,A ;RETURN CHARACTER JUST DELETED IN B
CAIN B,.CHTAB ;DELETED A <TAB>?
SETO B, ;YES, WARN NEED A ^R FOR SCREEN
JRST CPOPJ1 ;SUCCESSFULL RETURN
DELCH4: MOVEI B,.CHCNH ;A BACKSPACE CHARACTER
PUSHJ P,ECHOB ;OUTPUT IT
MOVEI B," " ;A SPACE CHARACTER
PUSHJ P,ECHOB ;OUTPUT IT
MOVEI B,.CHCNH ;AND FINALLY A BACKSPACE CHARACTER
PUSHJ P,ECHOB ;OUTPUT IT TOO
JRST DELCH3 ;REJOIN COMMON CODE
DELCH6: CAMN W2,CHINP ;AT BEGINNING OF DEST BUFFER?
JRST DELCH8 ;YES
LDB B,CHINP ;NO, CHECK CHARACTER PRECEEDING LF
CAIE B,.CHCRT ;A CR?
JRST DELCH8 ;NO, LEAVE IT ALONE
PUSHJ P,BACK ;YES, DELETE IT ALSO
POPJ P, ;(CAN'T HAPPEN)
; (TAKE SUCCESSFUL RETURN WITH <LF>)
DELCH8: MOVEI B,.CHCRT ;A <CR> CHARACTER
PUSHJ P,ECHOB ;OUTPUT IT
MOVEI B,.CHLFD ;A <LF> CHARACTER
PUSHJ P,ECHOB ;OUTPUT IT TOO
JRST CPOPJ1 ;SUCCESSFUL RETURN
;STILL IFN FTDEC10!FTEXEC
;RETYPE LINE (CONTROL-R)
RTYPE: PUSHJ P,RTYPES ;DO THE WORK
JRST NINSRT
;SUBROUTINE TO RETYPE LINE
RTYPES: PUSHJ P,DELCH8 ;OUTPUT A <CR><LF>
JFCL ; (DON'T GET HERE)
PUSHJ P,FNDLIN ;FIND BEGINNING OF LINE
MOVE A,W2 ;AT TOP OF BUFFER - USE IT
MOVE T,A ;SAVE PTR TO BEGINNING OF LINE
CAME T,W2 ;BEG OF LINE IS TOP OF BUFFER?
JRST RTYP1 ;NO, DON'T TYPE ^R BFR
SKIPE T,LINBP ;GET ^R BFR IF ANY
RTYW1: CAMN T,W2 ;UP TO TOP OF BFR?
JRST RTYP4 ;YES, DONE WITH ^R BFR
ILDB B,T ;GET CHAR FROM ^R BFR
JUMPN B,[PUSHJ P,ECHOB;RE-ECHO IT
JRST RTYW1]
RTYP4: MOVE T,W2 ;DONE WITH ^R BFR, NOW DO MAIN BFR
RTYP1: CAMN T,CHINP ;BACK TO END OF LINE?
POPJ P, ;YES
ILDB B,T ;NO, GET NEXT BYTE
PUSHJ P,ECHOB ;RE-ECHO IT
JRST RTYP1 ;LOOP UNTIL AT END OF BUFFER
;STILL IFN FTDEC10!FTEXEC
;DECREMENT BYTE POINTER
; A/ BYTE PTR
; PUSHJ P,DBP
; RETURNS +1, CLOBBERS B AND C
DBP: LDB B,[POINT 6,A,5] ;GET P
LDB C,[POINT 6,A,11] ;GET S
ADD B,C ;NEW P = P + S
CAIGE B,^D36 ;NEW P .GE 36?
JRST DBP1 ;NO, BYTE IS IN SAME WORD.
HRRI A,-1(A) ;DECREMENT ADDRESS
MOVEI B,^D36 ;MAKE P = REMAINDER (36,S)
IDIV B,C
MOVEI B,0(C)
DBP1: DPB B,[POINT 6,A,5]
POPJ P,
> ;END IFN FTDEC10!FTEXEC
;LISCK -- SUBROUTINE USED BY $$X, $W, AND $Z TO CHECK FOR INPUT
;CALL IS:
;
; PUSHJ P,LISCK
; NOTHING TYPED
; SOMETHING TYPED, ABORT
; "?" TYPED, GIVE STATUS
;
;USES AC T, TT2.
LISCK: PUSHJ P,LISTEN ;ANYTHING TYPED?
POPJ P, ;NO, "NOTHING TYPED" RETURN
AOS (P) ;SOMETHING TYPED
CAIN T,"?" ;USER TYPE A "?" CHARACTER?
AOS (P) ;YES, "GIVE STATUS" RETURN
POPJ P, ;NO, "ABORT" RETURN
;LISTEN -- SUBROUTINE TO TEST IF INPUT IS READY
;CALL:
; PUSHJ P,LISTEN
; NONE
; INPUT READY
;
;ALSO READS ONE CHARACTER INTO T. THIS CHARACTER IS EITHER
;REAL COMMAND INPUT, OR IS THROWN OUT SO A CHAR TYPED TO STOP A
;DDT LOOP WILL NOT AFFECT FUTURE COMMAND INPUT.
LISTEN:
IFN FTEXEC,<
SKPUSR ;IN EXEC MODE?
JRST XLISTN ;YES, USE SPECIAL EXEC CODE
> ;END OF IFN FTEXEC
IFN FTFILE&FTYANK,< ;FILDDT?
SKIPE COMAND ;STILL READING COMAND FILE?
POPJ P, ; IF YES, DO NOT LOOK FOR INPUT
; 1. SPEED UP FILDDT AND
; 2. ALLOW USER TO TYPE AHEAD
; (ONE CONTROL C)
> ;END OF IFN FTFILE&FTYANK
IFN FTDEC10,<
INCHRS T ;GET NEXT CHAR, NO IO WAIT
POPJ P, ;NO CHARACTER EXISTED, RETURN
JRST CPOPJ1 ;CHARACTER WAS THERE, SKIP RETURN
> ;END IFN FTDEC10
IFN FTDEC20,<
PUSHJ P,SAVR ;SAVE R(=T2) OVER SIBE%
EXCH T1,T
MOVEI T1,.PRIIN ;PRIMARY INPUT (TTY)
SIBE% ;INPUT BUFFER EMPTY?
AOSA 0(P) ;NO, GIVE SKIP RETURN
JRST LISTN6 ;YES, JUST RETURN NON-SKIP
PBIN% ;READ CHAR INTO T1
LISTN6: EXCH T1,T
POPJ P, ;RETURN
> ;END IFN FTDEC20
IFN FTEXEC,<
;HERE TO LISTEN IF IN EXEC MODE
XLISTE: SKIPE T,XNXTCH ;PRESET CHAR?
JRST [ SETZM XNXTCH ;YES, RETURN IT ONCE
JRST XLIST8]
IFN FTYANK,<
SKIPE COMAND ;COMAND FILE?
JRST XPTRIN ;YES, READ IT
> ;END IFN FTYANK
XLISTN: SKIPN XTYPAC ;GOT ANY TYPEAHEAD SAVED UP?
JRST XLISTT ;NO, JUST TRY FOR TERMINAL INPUT
SOS XTYPAC ;COUNT DOWN TYPEAHEAD CHARACTERS
SKIPN TT2,XTYPAG ;GET CURRENT TYPEAHEAD BYTE GETTER
MOVE TT2,[POINT 7,XTYPAB] ;NONE, INIT TO BEGINNING OF BUFFER
CAMN TT2,[POINT 7,XTYPAB+XTYPAW-1,34] ;AT END OF BUFFER?
MOVE TT2,[POINT 7,XTYPAB] ;YES, WRAP TO BEGINING OF BUFFER
ILDB T,TT2 ;GET NEXT SAVED TYPEAHEAD CHARACTER
MOVEM TT2,XTYPAG ;SET NEW TYPEAHEAD GETTER
JRST XLIST8 ;EXIT WITH COMMAND CHARACTER IN T
;ENTRY POINT FROM LISTEN.
;SEE IF A KL10, AND DO KL10 LISTEN IF SO.
XLISTT: SKPKL ;A KL10?
JRST XLIST2 ;NOT KL, CHECK OTHER CPUS
EXCH TT,TT2 ;SAVE TT
PUSHJ P,GVEPT ;GET EPT BASE IN TT
HALT .-1 ;NOT IN ADDRESS SPACE!
EXCH TT,TT2 ;PUT ADDRESS IN TT2
ADDI TT2,DTEMTI ;POINT INTO DTE BLOCK
SKIPN @TT2 ;ANY INPUT YET?
POPJ P, ;NO
SUBI TT2,DTEMTI-DTEF11 ;POINT TO DATA
MOVE T,@TT2 ;GET IT
ADDI TT2,DTEMTI-DTEF11 ;BACK UP TO STATUS
SETZM @TT2 ;RESET
JRST XLIST8 ;AND CHAR DOWN AND RETURN
;STILL IFN FTEXEC
;HERE IF NOT ON A KL10. TRY A KS10.
XLIST2: SKPKS ;ON A KS10?
JRST XLIST4 ;NO, GO DO OLD (KA/KI) WAY
MOVE T,CTYIWD ;PICK UP INPUT WORD
TXNN T,CTYIRD ;ANYTHING THERE?
POPJ P, ;NO CHARACTER, RETURN CPOPJ0
SETZM CTYIWD ;YES, SAY WE GOT IT
MOVE TT2,SAVAPR ;GET APR STATE
ANDI TT2,7 ;REDUCE TO PI ASSIGNMENT
WRAPR INT80(TT2) ;TELL 8080
JRST XLIST8 ;AND CHAR DOWN AND GIVE GOOD RETURN
;STILL IFN FTEXEC
;HERE TO DO OLD STYLE (KA/KI) LISTEN TO REAL HARDWARE CTY
XLIST4: CONSO TTY,40 ;DO KA OR KI TTY INPUT
POPJ P, ;NO CHARACTER
DATAI TTY,T ;READ IN PHYSICAL CHARACTER
;HERE FROM ALL CPU'S TO AND CHAR DOWN TO 7 BITS AND GIVE SKIP RETURN.
XLIST8: ANDI T,177 ;STRIP OFF GARBAGE
CAIN T,.CHCNO ;USER TYPE A ^O?
JRST [ SETCMM TTSUP ;TOGGLE SUPPRESSION FLAG
JRST XLISTN] ;CHECK FOR FURTHER INPUT
CAIN T,.CHCNQ ;USER TYPE A ^Q?
JRST [ SETZM TTHLD ;YES, CLEAR THE HOLD-OUTPUT FLAG
JRST XLISTN] ;CHECK FOR FURTHER INPUT
CAIN T,.CHCNS ;USER TYPE A ^S?
JRST [ SETOM TTHLD ;YES, SET THE HOLD-OUTPUT FLAG
JRST XLISTN] ;CHECK FOR FURTHER INPUT
SETZM TTSUP ;CLEAR SUPPRESSION FLAG
JRST CPOPJ1 ;AND RETURN WITH CHARACTER IN T
;STILL IFN FTEXEC
;HERE TO HANDLE EXEC-MODE TYPE-AHEAD
XTYPA: PUSH P,[XTYPAV] ;THE TYPE-AHEAD INTERVAL
POP P,XTYPAX ;RESET CHECK COUNTER (FOR EVAL/LOOK)
SKPEXC ;ONLY DO THIS IN EXEC MODE
POPJ P, ;USER-MODE, NOTHING TO DO
PUSHJ P,SAVT ;WANT TO PROTECT "T"
XTYPA0: PUSHJ P,XLISTT ;SEE IF ANY INPUT AVAILABLE
POPJ P, ;NO, NO TYPEAHEAD THEN
AOS TT2,XTYPAC ;YES, ADVANCE TYPEAHEAD COUNTER
CAILE TT2,XTYPAW*5 ;TYPEAHEAD BUFFER STILL HAVE ROOM?
JRST XTYPA6 ;NO, BOMB THIS CHARACTER
SKIPN TT2,XTYPAP ;GET CURRENT OUTPUT BYTE PUTTER
MOVE TT2,[POINT 7,XTYPAB] ;NONE, INITIALIZE PUTTER
CAMN TT2,[POINT 7,XTYPAB+XTYPAW-1,34] ;AT END OF BUFFER?
MOVE TT2,[POINT 7,XTYPAB] ;YES, RESET TO BEGINNING
IDPB T,TT2 ;STORE TYPEAHEAD CHARACTER
MOVEM TT2,XTYPAP ;SET NEW CURRENT OUTPUT BYTE PUTTER
JRST XTYPA0 ;SEE IF ANYTHING ELSE CAME IN
;TYPEAHEAD BUFFER OVERFLOWED - GO DINK AT THE USER
XTYPA6: SOS XTYPAC ;ADJUST COUNTER BACK
PUSH P,TTHLD ;SAVE CURRENT XON/XOFF STATUS
SETZM TTHLD ;FORCE OUTPUT TO GO OUT ASAP
MOVEI T,.CHBEL ;A DINK CHARACTER
PUSHJ P,XTOUT ;GO DINK AT USER
POP P,TTHLD ;RESTORE XON/XOFF STATUS
POPJ P, ;AND EXIT THIS VALE OF TEARS
> ;END IFN FTEXEC
IFN FTDEC10,<
IFN FTYANK,<
IFN FTEXEC,<
XPTRIN: SKIPE COMCOR ;IS COMMAND STRING FROM MEMORY?
JRST PTRIN ;YES, TREAT LIKE USER MODE, SORTA
PUSHJ P,PTRXNX ;GET NEXT CHAR FROM PTR
JRST PTRDON ;THROUGH
JRST PTRCHR ;PROCESS THE CHAR.
> ;END IFN FTEXEC
PTRIN: PUSHJ P,PTRNX ;GET NEXT CHAR
JRST PTRDON ;EOF ON COMMAND FILE
PTRCHR: CAIE T,.CHDEL ;RUBOUT?
SKIPN TT2,T ;NULL?
JRST PTRNXT ;IGNORE IT
IFN FTEXEC,<
SKPUSR ;EXEC MODE?
SKIPE COMCOR ;YES, FROM MEMORY?
JRST PTRCH2 ;USER MODE (OR CLOSE ENOUGH)
CAIE T,.CHCRT ;CR?
JRST CPOPJ1 ;NO. ECHO OF CHAR WILL HAPPEN LATER
PUSHJ P,PTRXNX ;READ (AND IGNORE) NEXT CHAR
JFCL ; WHICH OUGHT TO BE A LINE-FEED
MOVEI T,.CHCRT ;RETURN CR AS CHAR
JRST CPOPJ1
PTRCH2:
> ;END IFN FTEXEC
PUSHJ P,ECHO ;ECHO CHAR
JRST CPOPJ1 ;SKIP-RETURN WITH DATA
PTRNXT:
IFN FTEXEC,<
SKPUSR
JRST XPTRIN
> ;END IFN FTEXEC
JRST PTRIN
;THROUGH WITH COMMAND FILE
PTRKIL: PUSHJ P,PTRNX2 ;GO ZAPETH THE COMMAND FILE
;AND FALL INTO EOF CODE
PTRDON: SETZM COMAND ;NO LONGER PROCESSING COMMAND FILE
SETZM COMCOR ;AND IT IS NOT FROM MEMORY EITHER
SETOM PTDFLG ;FLAG EOF REACHED
PUSHJ P,DELCH8 ;TYPE A <CR><LF>
JFCL ;DON'T GET HERE
PUSHJ P,DELCH8 ;TYPE ANOTHER <CR><LF>
JFCL ;DON'T GET HERE EITHER
POPJ P, ;NON-SKIP RETURN
;STILL IFN FTDEC10 & IFN FTYANK
;COMMAND FILE IO
PTRNX: SKIPE COMCOR ;COMMAND FILE FROM MEMORY STRING?
JRST [ ILDB T,CBUF+1 ;YES, GET NEXT ASCIZ STRING CHR.
CAIE T,.CHCNZ ;IF A ^Z
JUMPN T,CPOPJ1 ;NOT, RETURN WITH GOOD CHARACTER
POPJ P,] ;RETURN EOF IF ^Z OR NULL
SOSLE CBUF+2 ;DATA LEFT?
JRST PTRNX1 ;YES
IN CM, ;GET NEXT BUFFER
JRST PTRNX1 ;GET NEXT CHARACTER
GETSTS CM,T ;ERROR, SEE WHAT KIND
TXNE T,IO.EOF ;END OF FILE?
JRST PTRNX2 ;YES, OK, JUST QUIT
TMSG <
? I/O error reading command file
> ;WARN USER OF LOSAGE
JRST PTRNX2 ;YES
;RETURN NEXT CHARACTER
PTRNX1: ILDB T,CBUF+1
JRST CPOPJ1 ;SKIP-RETURN WITH DATA
;RELEASE COMMAND FILE
PTRNX2: RELEASE CM, ;EOF - DONE
POPJ P, ;NON-SKIP MEANS DONE WITH COMMAND FILE
;STILL IFN FTDEC10 & IFN FTYANK
IFN FTEXEC,<
PTRXNX: SKIPE TT2,EPTPTR ;DATA IN PTR BUF?
JRST PTRXN3 ;YES
MOVE TT2,[POINT 7,EPTRBF] ;NO SET UP TO STORE IN PTR BUFFER
SETZM EPTRBF ;SWITCH FOR END OF TAPE TEST
CONO PTR,20 ;START PTR GOING
PTRXN1: CONSO PTR,400 ;EOT?
JRST PTRXN4 ;YES
CONSO PTR,10 ;DATA?
JRST PTRXN1 ;WAIT SOME MORE
DATAI PTR,T ;READ A CHAR
JUMPE T,PTRXN1 ;IGNORE NULLS
PTRXN2: IDPB T,TT2 ;SAVE IN DATA BUFFER
CAIE T,.CHLFD ;LF
CAMN TT2,EPTRND ; OR BUFFER FULL?
SKIPA TT2,[POINT 7,EPTRBF] ;YES. START TAKING CHARS OUT OF BUF
JRST PTRXN1 ;NO - READ ANOTHER
CONO PTR,0 ;SHUT OFF PTR BEFORE READING NEXT CHAR
PTRXN3: ILDB T,TT2 ;GET A CHAR
CAIE T,.CHLFD ;LF
CAMN TT2,EPTRND ; OR END OF BUFFER?
SETZ TT2, ;YES, START PTR FOR NEXT CHAR
MOVEM TT2,EPTPTR ;SAVE PNTR FOR NEXT CHAR
JRST CPOPJ1 ;HAVE A CHAR RETURN
;EOT
PTRXN4: SKIPN EPTRBF ;ANY DATA?
POPJ P, ;NO - DONE RETURN
SETZ T, ;YES - FILL REST OF BUFFER WITH 0'S
JRST PTRXN2
> ;END IFN FTEXEC
> ;END IFN FTYANK
> ;END IFN FTDEC10
;TTYCLR -- ROUTINE TO CLEAR ANY PENDING TTY INPUT
;CALL:
; PUSHJ P,TTYCLR
; RETURN
;
;DESTROYS R, T, TT2, AND T1 ON TOPS20
TTYCLR:
IFN FTEXEC,<
SKPUSR
JRST TTYCL6 ;SKIP CLEARING INPUT BUFFER AND ^O IF EXEC
> ;END IFN FTEXEC
IFN FTDEC10,<
SKPINL ;CLEAR ^O
JFCL ;(DON'T CARE)
CLRBFI ;CLEAR TYPEAHEAD
> ;END IFN FTDEC10
IFN FTDEC20,<
MOVX T1,TT%OSP ;MAKE SURE USER'S ^O IS CLEARED
ANDCAM T1,SAVTTY ;NOW THAT WE KNOW WE'RE BREAKING
MOVEI T1,.PRIOU ;LOAD PRIMARY OUTPUT POINTER
RFMOD% ;GET MODES
TXZE T2,TT%OSP ;CLEAR ^O, SKIP IF WASN'T SET
SFMOD% ;^O WAS SET, CLEAR IT
CFIBF% ;CLEAR INPUT BUFFER
> ;END IFN FTDEC20
;HERE AFTER CLEARING ^O AND INPUT BUFFER TO EAT LAST PENDING CHAR, IF ANY.
TTYCL6: PUSHJ P,LISTEN
JFCL
POPJ P,
SUBTTL TELETYPE IO LOGIC -- OUTPUT SUBROUTINES
;TSTRG -- SUBROUTINE TO TYPE OUT AN ASCIZ STRING.
;CALL:
; MOVEI W1,ADDRESS OF STRING
; PUSHJ P,TSTRG
; RETURN
;
;USES W1, T, TT2
TSTRG: HRLI W1,(POINT 7,) ;MAKE 7-BIT BYTE POINTER
CAIA ;ENTER LOOP
TSTRG3: PUSHJ P,TOUT ;TYPE THIS BYTE
ILDB T,W1 ;NEXT ASCII CHARACTER
JUMPN T,TSTRG3 ;IF NOT YET AT NULL KEEP TYPING
POPJ P, ;ALL DONE, RETURN
;TSIXN AND TOCTW PART OF EDIT 656
;TSIXN -- SUBROUTINE TO TYPE A SIXBIT WORD
;CALL: MOVE W1, SIXBIT WORD
; PUSHJ P,TSIXN
; RETURN
;
;USES T AND W1
TSIXN: JUMPE W1,CPOPJ ;RETURN IF NOTHING TO PRINT
TSIXN1: LSHC T,6 ;GET A CHARACTER
ANDI T,77 ;STRIP OFF JUNK
ADDI T,40 ;CONVERT TO ASCII
PUSHJ P,TOUT ;PRINT IT
JUMPN W1,TSIXN1 ;LOOP IF MORE
POPJ P, ;ELSE RETURN
;TOCTW -- SUBROUTINE TO TYPE A OCTAL WORD
;CALL: MOVE W1, OCTAL WORD
; PUSHJ P,TOCTW
; RETURN
;
;USES T, W1, AND W2
TOCTW: IDIVI W1,10 ;DIVIDE
PUSH P,W2 ;SAVE REMAINDER
SKIPE W1 ;DONE?
PUSHJ P,TOCTW ;RECURSE
POP P,T ;GET A DIGIT
ADDI T,"0" ;MAKE ASCII
PJRST TOUT ;PRINT CHARACTER AND RETURN
;Txxx ROUTINES -- ROUTINES TO TYPE COMMON CHARACTER(S) TO THE TTY.
;CALL:
; PUSHJ P,TCR/TCRLF ETC.
; RETURN
;
;USES T, TT2.
TBEL: MOVEI T,.CHBEL ;A <BEL> CHARACTER
PJRST TOUT ;GO TYPE IT OUT
TBSP: MOVEI T,.CHCNH ;A <BS> CHARACTER
PJRST TOUT ;GO TYPE IT OUT
TSEP: MOVEI T,"/" ;TYPE SLASH-TAB SEPARATOR
PUSHJ P,TOUT ;FALL INTO TTAB
TTAB: MOVEI T,.CHTAB ;A <TAB> CHARACTER
MOVX TT2,TT$SPC ;SPACE OR TAB BIT
TDNE TT2,TTYMSK ;SPACES OR TAB?
PJRST TOUT ;TAB, GO TYPE IT OUT
PUSHJ P,TSPC ;SPACES
PUSHJ P,TSPC ;SPACES
TSPC: MOVEI T," " ;SPACE
PJRST TOUT
TCRLF: PUSHJ P,TCR
TLF: MOVEI T,.CHLFD ;LINE FEED
PJRST TOUT
TCR: MOVEI T,.CHCRT ;A <CR> CHARACTER
PJRST TOUT ;GO TYPE IT OUT
;TOUT -- SUBROUTINE TO CLEAR LINE INPUT BUFFER AND TYPE CHAR IN T
;TOUTB -- TOUT WITH CHARACTER IN AC B
;ECHO -- ENTRY POINT TO AVOID CLEARING LINE BUFFER FOR EXEC-MODE ECHOING
;ECHOB -- ECHO WITH CHARACTER IN AC B
;CALL:
; MOVEI T,CHAR ;OR MOVEI B,CHAR
; PUSHJ P,TOUT/ECHO ;OR TOUTB/ECHOB
; RETURN
;
;TOUT[B] IS THE ROUTINE TO CALL WHEN THE OUTPUT IS TO COUNT AGAINST
;THE HORIZONTAL CARRIAGE POSITION (I.E., THE CHARACTER IS REAL DDT
;OUTPUT). TOUT ALSO CLEARS THE COMMAND TYPEIN BUFFER.
;
;ECHO[B] IS THE ROUTINE TO CALL WHEN THE OUTPUT DOESN'T COUNT AGAINST
;THE HORIZONTAL CARRIAGE POSITION (I.E., THE CHARACTER WILL BE READ
;BY HIGHER-LEVEL ROUTINES AS A COMMAND CHARACTER (AND WILL GET COUNTED
;UP AT TIN).
;
;PRESERVES RIGHTMOST 7 BITS OF T, USES TT2
ECHOB: EXCH B,T ;CHARACTER TO BE ECHOED IS IN B
PUSHJ P,ECHO ;ECHO THE CHARACTER
EXCH T,B ;RESTORE AC T (AND B AS WELL)
POPJ P, ;RETURN
TOUTB: EXCH B,T ;CHARACTER TO BE OUTPUT IS IN B
PUSHJ P,TOUT ;OUTPUT THE CHARACTER
EXCH T,B ;RESTORE AC T (AND B AS WELL)
POPJ P, ;RETURN
TOUT: SETZM CHINP ;RESET INPUT LINE
SETZM CHINC
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;HERE TO CONVERT CONTROLS TO ^X, ESCAPES TO $, ETC.
ECHO:
TOUT0: CAIE T,.CHCRT ;CR OR LF?
CAIN T,.CHLFD
JRST TOUT4 ;YES, NO CONVERSION
CAIE T,.CHBEL ;BELL?
CAIN T,.CHCNH ;OR BACKSPACE?
JRST TOUT4 ;NO CONVERSION
CAIE T,.CHTAB ;TAB?
JRST ECHO3 ;NO, LOOK FOR CONTROL CHARACTERS
PUSHJ P,SAVR ;NEED A SCRATCH AC FOR A MOMENT
MOVX R,TT$TAB ;TAB SIMULATION BIT
TDNE R,TTYMSK ;CAN TERMINAL HANDLE TABS?
JRST TOUT4 ;YES, OUTPUT LITERAL TAB
MOVEI R,7 ;MASK FOR TAB-ALIGNEDNESS
MOVEI T," " ;SPACE FOR TAB-FAKEDNESS
PUSHJ P,TOUT4 ;PRINT A SPACE
TDNE R,TOHPS ;REACHED A TAB-STOP YET?
JRST .-2 ;NO, KEEP SIMULATING
MOVEI T,.CHTAB ;TRUTH IN ADVERTISING (ETC.)
POPJ P, ;AND RETURN HAVING OUTPUT A <TAB>
ECHO3: CAIN T,.CHESC ;CONVERT ESC
JRST [ PUSH P,T ;SAVE ORIG CHAR
MOVEI T,"$"
JRST TOUT3]
CAIL T," " ;CONTROL CHAR?
JRST TOUT4 ;NO
PUSH P,T ;YES, INDICATE
MOVEI T,"^" ;VIA ^x
PUSHJ P,TOUT4
MOVE T,(P) ;RECOVER ORIG CHAR
XORI T,100 ;CONVERT TO PRINTING EQUIVALENT
;FALL INTO TOUT3
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;HERE TO TYPE CHAR IN T, RESTORE ORIG CHAR FROM STACK, AND RETURN
TOUT3: PUSHJ P,TOUT4 ;TYPE LITERAL CHARACTER
POP P,T ;RESTORE ORIGINAL
POPJ P, ;RETURN FROM TOUT/ECHO
TOUT4: ;OUTPUT THE CHARACTER
IFN FTEXEC,<
SKPUSR ;EXEC MODE?
JRST XTOUT ;YES, USE EXEC TYPEOUT ROUTINES
> ;END IFN FTEXEC
IFN FTDEC10,<
IFN FTYANK,<
MOVE TT2,TTYMSK ;GET TTY MASK BITS
SKIPE COMAND ;ALWAYS ECHO IF NOT DOING $Y
TXNN TT2,TT$EYB ;ELSE ECHO $Y OUTPUT ONLY IF OK
> ;END IFN FTYANK
OUTCHR T ;OUTPUT A CHARACTER
> ;END IFN FTDEC10
IFN FTDEC20,<
IFN FTYANK,<
SKIPN COMAND ;DOING $Y?
JRST TOUT5 ;NO, ALWAYS ECHO
TXNE TT2,TT$EYB ;IS IT OK TO ECHO?
JRST TOUT6 ;NO, DON'T DO IT
> ;END IFN FTYANK
TOUT5: EXCH T1,T ;YES, OUTPUT THE CHARACTER
PBOUT% ;CHAR TO TTY FROM T1
EXCH T1,T
> ; END IFN FTDEC20
TOUT6: CAIN T,.CHTAB ;OUTPUT A <TAB>?
JRST TOUT7 ;YES, SPECIAL ADDITION
CAIN T,.CHCNH ;A <BS>?
JRST TOUT8 ;YES, NEGATIVE ADDITION
CAIE T,.CHLFD ;NO, HOW ABOUT A <LF>?
CAIN T,.CHBEL ;OR A <BEL>?
POPJ P, ;YES, DON'T CHANGE HORIZONTAL POSITION
CAIE T,.CHCNU ;A ^U (DOESN'T ECHO EVEN IN USER MODE)
CAIN T,.CHDEL ;A <DEL>?
POPJ P, ;YES, DON'T CHANGE HORIZONTAL POSITION
AOS TOHPS ;NO, ADVANCE ONE PRINTING CHARACTER
CAIN T,.CHCRT ;A <CR>?
SETOM TOHPS ;YES, BACK TO LEFT MARGIN
CAIGE T," " ;LEFT WITH A CONTROL CHARACTER?
AOS TOHPS ;YES, ACCOUNT FOR "^" FORM OF ECHO
; (THIS CAN ONLY HAPPEN IN USER MODE)
POPJ P, ;RETURN FROM TOUT/ECHO
TOUT7: MOVEI T,10 ;TABS MAY MOVE 8 SPACES
ADD T,TOHPS ;ACCOUNT FOR THAT MUCH
ANDCMI T,7 ;MAKE IT MOD 8 (SORT OF)
MOVEM T,TOHPS ;NEW CARRIAGE POSITION
MOVEI T,.CHTAB ;RESTORE T
POPJ P, ;RETURN
TOUT8: SOS TOHPS ;BACKSPACES MOVE BACKWARDS
POPJ P, ;RETURN
IFN FTEXEC,<
;HERE TO TYPE THE CHAR IN AC T IF IN EXEC MODE.
XTOUT: SKIPE TTSUP ;SUPPRESSING OUTPUT?
JRST XTOUT8 ;YES, JUST RETURN
SKIPE TTHLD ;HOLDING OUTPUT (I.E., XOFF'ED)?
JRST [ PUSHJ P,XTYPA ;YES, CHECK FOR "TYPEAHEAD" (XON)
JRST XTOUT] ;SEE IF CLEAR YET
ANDI T,377 ;DON'T CONFUSE THE HARDWARE WITH $9T/ETC
;FIRST CHECK FOR KA/KI STYLE I/O
SKPKA ;ON A KA-10?
SKPNKI ;OR A KI-10?
CAIA ;YES TO ONE OF THE ABOVE
JRST XTOUT0 ;NO, TRY OTHERS
MOVE TT2,T ;WORKING COPY OF CHARACTER
IMULI TT2,200401 ;GENERATE PARITY
AND TT2,[11111111]
IMUL TT2,[11111111]
TLNE TT2,10
TRC T,200 ;MAKE PARITY EVEN
CONSZ TTY,20
JRST .-1
DATAO TTY,T
JRST XTOUT8 ;CLEAN UP AND RETURN
;CHECK TO SEE IF ON A KL10 AND DO KL10 XTOUT IF SO.
XTOUT0: SKPKL ;KL10?
JRST XTOUT2 ;NO, GO CHECK KS10
EXCH TT,TT2 ;SAVE TT
PUSHJ P,GVEPT ;GET EPT BASE IN TT
HALT . ;NOT IN ADDRESS SPACE!
EXCH TT,TT2 ;PUT ADDRESS IN TT2
MOVEI T,.DTMTO(T) ;GET MONITOR OUTPUT COMMAND AND CHAR IN T
ADDI TT2,DTECMD ;RELOCATE TO COMMAND WORD
MOVEM T,@TT2 ;PUT IN COMMAND WORD
ADDI TT2,DTEMTD-DTECMD ;POINT TO DONE FLAG
SETZM @TT2 ;CLEAR DONE FLAG.
XCT DING11 ;RING THE DOORBELL
SKIPN @TT2 ;DONE YET?
JRST .-1 ;NO, LOOP
JRST XTOUT8 ;YES, GO RESTORE CHAR AND RETURN
;STILL IFN FTEXEC
;HERE IF NOT ON A KL10. CHECK TO SEE IF WE ARE ON A KS10.
XTOUT2: SKPKS ;KS-10?
JRST XTOUT4 ;NO, GO CHECK OTHERS
MOVE TT2,CTYOWD ;ON A KS10, GET OUTPUT ADDRESS
TXNN TT2,CTYORD ;OUTPUT READY?
JRST XTOUT3 ;YES
MOVE TT2,SAVAPR ;NO, GET APR STATE
ANDI TT2,7 ;GET PI ASSIGNMENT
WRAPR INT80(TT2) ;INTERRUPT 8080
XTOUT3: MOVE TT2,CTYOWD ;OUTPUT WORD
TXNE TT2,CTYORD ;OUTPUT READY?
JRST XTOUT3 ;NO WAIT
IORI T,CTYORD ;YES FLAG CHARACTER
MOVEM T,CTYOWD ;STORE CHARACTER FOR 8080
MOVE TT2,SAVAPR ;GET APR STATE
ANDI TT2,7 ;REDUCE TO PI ASSIGNMENT
WRAPR INT80(TT2) ;NUDGE 8080
JRST XTOUT8 ;GO RESTORE CHAR AND RETURN
;UNKNOWN PROCESSOR TYPE
XTOUT4: HALT . ;UNKNOWN PROCESSOR TYPE
;HERE TO RESTORE T AND RETURN FROM XTOUT.
XTOUT8: PUSHJ P,XTYPA ;CHECK FOR TYPEAHEAD (AND ^S, ETC)
ANDI T,177 ;AND T DOWN TO ORIGINAL 7 BITS
JRST TOUT6 ;UPDATE COUNTERS
> ;END IFN FTEXEC
SUBTTL TELETYPE IO LOGIC -- SAVE/RESTORE
IFE FTFILE,<
;TTYSAV -- SUBROUTINE TO SAVE USER TTY STATE ON RETURN TO DDT
;CALL:
; PUSHJ P,TTYSAV
; RETURN
TTYSAV:
IFN FTSCSH,< ;ONLY IF USING SYMBOL TABLE CACHE
PUSHJ P,.CLCSH ;CLEAR THE CACHE, MAYBE
> ;END IFN FTSCSH
SETOM LASTPG ;DON'T KNOW ABOUT ANY PAGES
SETZM SYMVAL ;DON'T TRUST THE SYMBOL TABLE POINTERS
IFN FTEXEC,<
SKPUSR
JRST XTTYRE
> ;END IFN FTEXEC
IFN FTDEC10,<
MOVE T,[2,,W1] ;SENSE. UUO: 2 ARGS, IN W1 AND W2
MOVX W1,SIXBIT/TTY/ ;DEVICE TO READ STATUS OF IS TTY:
MOVE W2,[3,,A] ;MONITOR STORES STATUS IN A-C
SENSE. T,UU.PHY ;READ STATUS
JFCL ;OLD MONITOR?
SKIPN SAVTTY ;ALREADY SAVED?
HRROM B,SAVTTY ;REMEMBER STATUS, INSURE NON-ZERO
MOVE T,[2,,W1] ;CLRST. UUO: 2 ARGS, IN W1 AND W2
MOVX W1,SIXBIT/TTY/ ;DEVICE TO SET IS TTY:
SETZ W2, ;SET TO NORMAL (ZERO) STATUS (TURN ON ECHO ETC)
CLRST. T,UU.PHY ;DO IT
JFCL ;OLDER MONITOR?
MOVX W1,.TODIS ;THE TERMINAL-IS-A-DISPLAY CODE
SKIPN W2,TTDEV ;GOT AN $Y'ED TERMINAL?
SETO W2, ;NO, -1 := US
MOVE T,[2,,W1] ;TRMOP. ARG POINTER TO
TRMOP. T, ;READ DISPLAY MODE
SETZ T, ;???
DPB T,[POINTR TTYMSK,TT$DEL] ;SET <DEL> HANDLING
MOVEI T,1 ;TAB SUPPORT
DPB T,[POINTR TTYMSK,TT$TAB] ;SET <TAB> LITERAL MODE
> ;END IFN FTDEC10
;CONTINUED ON NEXT PAGE
;STILL IFE FTFILE
;FALL IN FROM ABOVE
IFN FTDEC20,<
SKIPE SAVTTY ;ALREADY SAVED?
JRST TTYRE4 ;YES, DON'T SAVE IT AGAIN
MOVEI T1,.FHSLF ;NO, LOAD PTR. TO OUR PROCESS
RTIW% ;GET INTERRUPT MASK
MOVEM T2,SAVTIW ;SAVE IT
MOVEI T1,.PRIIN
RFMOD% ;GET MODES
MOVEM T2,SAVTTY
RFCOC% ;GET CC MODES
DMOVEM T2,SAVTT2
MOVEI T1,1 ;TAB SIMULATION BIT
DPB T1,[POINTR TTYMSK,TT$TAB] ;MONITOR ALWAYS DOES TABS
TTYRE4: DMOVE T1,[EXP .FHSLF,0] ;NEW MASK FOR THIS FORK IS ZERO
STIW% ;SET NEW INTERRUPT MASK
MOVEI T1,.PRIIN ;TIME TO SETUP OUR TERMINAL
MOVE T2,SAVTTY ;GET OLD RFMOD% WORD
TXZ T2,TT%WAK+TT%DAM
TXO T2,<TT%WKF+TT%WKN+TT%WKP+TT%ECO+FLD(.TTASC,TT%DAM)>
SFMOD%
DMOVE T2,[BYTE (2) 1,1,1,1,1,1,1,2,1,2,2,1,1,2,1,1,1,1
BYTE (2) 1,1,1,1,1,1,1,1,1,3,1,1,1,1]
SFCOC% ;SETUP PROPER DDT MODES
> ;END IFN FTDEC20
IFN FTEXEC!FTMON,<
JRST TTYRE6> ;GO CHECK HIDDEN SYMBOL PROCESSING
IFE FTEXEC!FTMON,<
POPJ P,> ;ALL DONE NOW
;STILL IFE FTFILE
IFN FTEXEC,<
;HERE TO SAVE TTY STATUS IF IN EXEC MODE.
XTTYRE: SETZM PAGVAL ;DON'T TRUST PAGING DATA
SETZM PAGVAS ;OR ALTERNATE PAGING DATA
SKPKL ;ON A KL-10?
JRST XTTYR6 ;NO, GO CHECK OTHER CPUS
;HERE IF ON A KL10. NEED TO FIND THE MASTER -11, SAVE ITS DTE STATE,
;AND THEN SAVE THE ACCOUNTING METERS IN THE EPT (MAY NEED TO BE IN SAVEG).
SKIPE SAVTTY ;PGM MODES IN EFFECT?
JRST XTTYR5 ;NO, DON'T SAVE
CONI MTR,MTRCNI ;SAVE MTR STATE
CONI TIM,TIMCNI ;SAVE TIM STATE
MOVSI T,-DTEN ;POLL ALL DTES
MOVE W2,[CONSO DTE,DTERES] ;GET TEST WORD
MOVE W1,[CONSZ DTE,PI0ENB+7] ;TEST FOR PI0 ENABLED
; OR PI ASSIGNMENT UP
MOVE W,[CONO DTE,0] ;PROTOTYPE CONO
XTTYR1: XCT W1 ;PI 0 UP ON THIS GUY?
JRST XTTYR2 ;YES, CHECK TO SEE IF MASTER
HRRI W,PIENB+PI0ENB ;NO. SET PI0
XCT W ;CONO TO SET PI0
XCT W1 ;NOW UP?
TRZA W,PI0ENB ;YES, TURN OFF ZERO
JRST XTTYR3 ;NO. DOESN'T EXIST THEN
XCT W ;TURN PI 0 BACK OFF
XTTYR2: XCT W2 ;THIS THE MASTER?
JRST XTTYR4 ;YES, GO REMEMBER IT
XTTYR3: ADD W2,[1B9] ;NEXT DTE
ADD W,[1B9]
ADD W1,[1B9] ;ADJUST ALL I/O INSTRUCTIONS
AOBJN T,XTTYR1 ;POLL ALL OF THEM
HALT . ;WHAT CAN WE DO?
;CONTINUED ON NEXT PAGE
;STILL IFE FTFILE & IFN FTEXEC
;CONTINUED FROM PREVIOUS PAGE
;HERE WHEN WE HAVE FOUND THE MASTER DTE
XTTYR4: MOVEI T,0(T) ;GET NUMBER OF MASTER DTE
MOVEM T,MSTRDT ;SAVE IT
LSH T,^D<35-9> ;POSITION CODE IN B9
ADD T,[CONO DTE,TO11DB] ;GET THE INSTRUCTION
MOVEM T,DING11 ;SAVE IT
PUSHJ P,GVEPDT ;GET BASE OF MASTER DTE'S CHUNK IN EPT
MOVE TT1,T ;COPY OF BASE ADDRESS
ADDI TT1,DTEII ;START OF EPT LOCATIONS TO SAVE
XMOVEI TT2,SAVTTY ;WHERE TO SAVE THEM
MOVEI TT,SAVDRW-SAVTTY+1 ;HOW MANY TO SAVE
PUSHJ P,DOXBLT ;GO SAVE THEM
HALT . ;CAN'T
ADDI T,DTEEPW ;LOOK AT PROTOCOL FLAG
SKIPN @T ;USING PRIMARY PROTOCOL?
JRST XTTYR5 ;NO. GO ON
MOVE T,MSTRDT ;GET MASTER'S ID
LSH T,^D<35-9> ;POSITION CODE IN B9
ADD T,[CONSZ DTE,TO11DB] ;GET TEST INSTRUCTION
XCT T ;WAIT FOR -11 TO ANSWER ALL DOORBELLS
JRST .-1 ;THE WAIT
XTTYR5: CONO MTR,MTRLOD+MTRTBF ;TURN OFF ALL METERS AND TIME BASE
CONO TIM,0 ;TURN OFF INTERVAL TIMER
PUSHJ P,GVEPDT ;FIND MASTER DTE'S CHUNK OF EPT
ADDI T,DTEII ;POINT TO INTERRUPT INSTR
MOVSI W2,(HALT)
MOVEM W2,@T ;NO INTERRUPTS
ADDI T,DTEEPW-DTEII ;POINT TO EXAMINE PROTECTION WORD
SETZM @T ;CLEAR IT
MOVEI T,.DTMMC ;TURN ON SECONDARY TTY I/O SYSTEM
PUSHJ P,DTEDCM ;TELL THE -11 TO DO IT
JRST TTYRE6 ;GO CHECK HIDDEN SYMBOL PROCESSING
;GVEPDT -- ROUTINE TO LOCATE MASTER DTE'S CHUNK IN EPT.
;CALL:
; PUSHJ P,GVEPDT
; RETURN
; T/ ADDRESS OF MASTER DTE'S CHUNK OF EPT.
;
;USES NO OTHER ACS.
GVEPDT: PUSH P,TT ;SAVE AN AC
PUSHJ P,GVEPT ;START WITH EPT BASE
HALT . ;AUGH!
MOVE T,MSTRDT ;GET MASTER DTE NUMBER
LSH T,3 ;OFFSET FOR HIS CHUNK
ADD T,TT ;IN THE EPT
POP P,TT ;RESTORE AC
POPJ P, ;ALL DONE
;STILL IFE FTFILE & IFN FTEXEC
;HERE IF NOT ON A KL10. CHECK TO SEE IF ON A KS10.
XTTYR6: SKPKS ;ON A KS10?
JRST XTTYR8 ;NO, GO CHECK OTHER PROCESSORS
MOVE T,RLWORD ;GET KEEP ALIVE STATE
SKIPE SAVTTY ;ALREADY HAVE IT?
JRST XTTYR7 ;YES, DON'T SAVE AGAIN
MOVEM T,SAVTTY ;NO, SAVE IT
RDTIMS SAVTIM ;SAVE TIMEBASE
CONI PAG,TT1 ;GET PAGING BITS
TXNN TT1,PGKLMD ;KL-PAGING?
SETOM KIPAG ;NO
TXNE TT1,PGKLMD ;KL-PAGING?
SETOM KLPAG ;YES
XTTYR7: TXZ T,KPACT ;STOP KEEP ALIVE
MOVEM T,RLWORD ;TELL 8080
JRST TTYRE6 ;GO CHECK HIDDEN SYMBOLS
;NOT ON A KL10 OR A KS10. MUST BE ON A KA10 OR A KI10
XTTYR8: SKIPE SAVTTY ;ALREADY HAVE IT?
JRST XTTYR9 ;YES
CONI TTY,SAVTTY ;SAVE PI ASSMT
CONO TTY,0 ;SET PI ASSMT TO 0
MOVSI W2,1
CONSZ TTY,120 ;WAIT FOR PREVIOUS ACTIVITY TO FINISH
SOJG W2,.-1 ;BUT DON'T WAIT FOREVER
CONI TTY,W2 ;UPDATE STATUS BITS
DPB W2,[POINT 15,SAVTTY,32]
DATAI TTY,W2
HRLM W2,SAVTTY
XTTYR9: CONO TTY,3410 ;INIT TTY FOR DDT
JRST TTYRE6 ;GO CHECK HIDDEN SYMBOLS
> ;END IFN FTEXEC
;STILL IFE FTFILE
IFN FTEXEC!FTMON,<
;HERE TO INVESTIGATE WHETHER THE SYMBOL TABLE IS IN AN ALTERNATE
;ADDRESS SPACE OR NOT, AND SET UP TO SWITCH MAPS IN SYMSET IF SO.
;TOPS-20 NOW USES EXTENDED ADDRESSING INSTEAD OF AN ALTERNATE ADDRESS
;SPACE, BUT STILL USES THE EXEC DATA VECTOR TO LOCATE THE SYMBOL TABLE.
TTYRE6:
IFN FTEXEC,< ;EDDT OR KDDT
SKPEXC ;IN EXEC MODE?
POPJ P, ;NO, DO LIKE USER DDTS
> ;END IFN FTEXEC
IFN FTEX20!FTMON,< ;TOPS-20 MONITOR
MOVE T,[MSEC1,,MONPDV] ;GLOBAL ADDR OF PDV FLAG
IFN FTEX20,<
SKPNS0 ;STILL IN SECTION ZERO?
TLZ T,-1 ;YES, WANT SEC. 0 REF
> ;END IFN FTEX20
SKIPE @T ;MONITOR HAVE A PDV?
POPJ P, ;IT DOES, JUST USE IT
> ;END IFN FTEX20!FTMON
IFN FTDEC10,<
SETZM HSBLK ;DO ALL FETCHES IN CURRENT SPACE FOR NOW
SETZM JOBEDV ;DON'T KNOW ABOUT CPNDDT YET
> ;END IFN FTDEC10
MOVEI R,.JBEDV ;POINTER TO EXEC DATA VECTOR
PUSHJ P,FETCHV ;GET IT
JRST TTYRE8 ;NOT THERE
JUMPE T,TTYRE8 ;POINTER NOT SET UP
MOVE R,T ;POINT TO BLOCK
IFN .EDCNT,ADDI R,.EDCNT ;GET COUNT WORD
PUSHJ P,FETCHV ; . . .
JRST TTYRE8 ;ILLEGAL ADDRESS
TXC T,SIXBIT/EDV/ ;CHECK FIRST 3 CHARS FOR RIGHT VALUE
TLNN T,-1 ;ARE THEY 'EDV'?
CAIGE T,.EDHSF+1 ;YES, BUT IS THE BLOCK LONG ENOUGH?
JRST TTYRE8 ;NO, PRETEND WE DIDN'T SEE IT
IFN FTDEC10,< ;CPNDDT ONLY ON -10
CAILE T,.EDCPU ;IF LONG ENOUGH FOR BREAKPOINT STUFF,
MOVEM R,JOBEDV ;SAVE FOR LATER REFERENCING
>
IFN FTDEC10,< ;HIDDEN SYMS ONLY ON -10
CAILE T,.EDLNK ;IS IT LONG ENOUGH TO FIND THE RIGHT EDV?
SKPKLS ;AND DO WE UNDERSTAND ITS PAGING WELL?
JRST TTYRR0 ;NO, DON'T BOTHER TO TRY
TTYRR1: ADDI R,.EDEPT-.EDCNT ;POINT TO EPT WORD
PUSHJ P,FETCHV ;TRY TO GET IT
JRST TTYRE8 ;SYMBOLS NOT HIDDEN IF BUM EDV
CONI PAG,S ;GET EBR
ANDI S,17777 ;MASK TO PHYSICAL PAGE NUMBER
LSH S,PG2WRD ;CONVERT TO PHYSICAL ADDRESS
CAME S,T ;DO THEY MATCH?
JRST TTYRR2 ;NO, TRY TO FIND ANOTHER
SUBI R,.EDEPT-.EDCNT ;YES, POINT TO START AGAIN
MOVEM R,JOBEDV ;MAKE SURE IT'S SET UP FOR LATER
JRST TTYRR0 ;WE GOT A GOOD ONE
TTYRR2: ADDI R,.EDLNK-.EDEPT ;POINT TO LINK WORD
PUSHJ P,FETCHV ;TRY TO GET POINTER TO NEXT
JRST TTYRE8 ;NO HIDDEN SYMBOLS IF NO GOOD EDV
JUMPE T,TTYRE8 ;NO HIDDEN SYMBOLS IF NO NEXT
CAMN T,JOBEDV ;HAVE WE LOOPED ALL THE WAY AROUND?
JRST TTYRE8 ;YES, CAN'T USE HIDDEN SYMBOLS
MOVE R,T ;NO, START OVER WITH THIS EDV
JRST TTYRR1 ;TRY AGAIN
TTYRR0: ADDI R,.EDHSB-.EDCNT ;POINT TO HIDDEN SYMBOL SWAP BLOCK
PUSHJ P,FETCHV ;GET CONTENTS
JRST TTYRE8 ;NOT THERE
JUMPE T,TTYRE8 ;0 MEANS SYMBOLS NOT HIDDEN
MOVEM T,TTEM1 ;STORE ADDRESS OF BLOCK
;FALL INTO NEXT PAGE
;STILL IFE FTFILE AND IFN FTEXEC!FTMON AND IFN FTDEC10
;FALL IN FROM ABOVE
;NOW LOOP OVER THE HIDDEN SYMBOL BLOCK, CHECKING ALL THE SUB-BLOCKS FOR
;LEGALITY.
MOVEM R,TTEM2 ;SAVE R FOR A WHILE
MOVE R,T ;ADDRESS OF BLOCK
PUSHJ P,FETCHV ;GET FIRST WORD (TOTAL COUNT)
JRST TTYRE8 ;NOT ACCESSIBLE
SUBI T,1 ;WE JUST PASSED ONE OF THE WORDS
;BACK HERE FOR EACH SUB-BLOCK
TTYRE7: MOVEM T,TTEM3 ;SAVE CURRENT COUNT
MOVE R,T ;CALCULATE POINTER TO NEXT BLOCK
SUBI R,3 ;OFFSET TO BEGINNING OF SUB-BLOCK
ADD R,TTEM1 ;ADDRESS OF NEXT SUB-BLOCK
PUSHJ P,FETCHV ;FIRST WORD OF SUB-BLOCK
JRST TTYRE8 ;NOT ACCESSIBLE
MOVE W,T ;SAVE COUNT
ADDI R,1 ;POINT TO HARDWARE BLOCK ADDRESS
PUSHJ P,FETCHV ;GET ADDRESS
JRST TTYRE8 ;NOT THERE
MOVE S,T ;SAVE IN S FOR A WHILE
ADDI R,1 ;POINT TO SYMBOL BLOCK ADDRESS
PUSHJ P,FETCHV ;GET ADDRESS
JRST TTYRE8 ;NOT THERE
MOVE W1,T ;SAVE IN W1
ADDI R,1 ;POINT TO SAVE BLOCK ADDRESS
PUSHJ P,FETCHV ;GET ADDRESS
JRST TTYRE8 ;NOT THERE
MOVE W2,T ;SAVE IN W2
;FALL INTO NEXT PAGE
;STILL IFE FTFILE AND IFN FTEXEC!FTMON AND IFN FTDEC10
;FALL IN FROM ABOVE
;NOW THAT WE HAVE THE ADDRESS OF EACH SUB-SUB-BLOCK, CHECK THEM OUT.
MOVE R,S ;PUT HARDWARE BLOCK ADDRESS IN R
MOVE S,W ;COUNT IN S
XMOVEI T,HSBITS ;VALIDATION ROUTINE
PUSHJ P,CHKRNG ;CHECK BLOCK
JRST TTYRE8 ;NO GOOD
MOVE R,W1 ;SYMBOL BLOCK ADDRESS IN R
MOVE S,W ;COUNT IN S
XMOVEI T,HSBITS ;VALIDATION ROUTINE
PUSHJ P,CHKRNG ;CHECK BLOCK
JRST TTYRE8 ;NO GOOD
MOVE R,W2 ;SAVE BLOCK ADDRESS IN R
MOVE S,W ;COUNT IN S
XMOVEI T,HSBITS ;VALIDATION ROUTINE
PUSHJ P,CHKRNG ;CHECK BLOCK
JRST TTYRE8 ;NO GOOD
MOVE T,TTEM3 ;GET CURRENT COUNT
SUBI T,3 ;BLOCKS ARE 4 WORDS LONG
SOJG T,TTYRE7 ;LOOP OVER ALL BLOCKS
MOVE R,TTEM2 ;ALL DONE, RESTORE R
ADDI R,.EDSYM-.EDHSB ;ADVANCE TO SYMBOL TABLE WORD
> ;END IFN FTDEC10
IFN FTDEC20,< ;ONLY -20 HAS .EDSEC
ADDI R,.EDSEC-.EDCNT
CAIGE T,.EDSEC+1 ;LONG ENOUGH TO HAVE SECTION SPECIFIED?
JRST TTYRE8 ;NO, SKIP SECTION
PUSHJ P,FETCHV ;YES, GET SECTION NO.
JRST TTYRE8
HLROM T,SYTLOC ;SAVE SECTION
SUBI R,.EDSEC-.EDSYM ;POINT TO SYMBOL TABLE WORD
> ;END IFN FTDEC20
PUSHJ P,CHKADR ;MAKE SURE ACCESSIBLE
TXC TT,PG$EXI!PG$REA!PG$WRT ;COMPLEMENT BITS THAT MUST BE ON
TXNE TT,PG$EXI!PG$REA!PG$WRT!PG$SPY!PG$ABZ ;ADDR OK?
JRST TTYRE8 ;NO, ABORT
MOVEM R,SYMP+S$SUB ;STASH ADDRESS FOR SYMCHK
IFN FTEX20,< ;IN KDDT ONLY,
PUSHJ P,FETCHV ;SEE IF THE POINTER IS SET UP YET
JRST TTYRE8 ;CAN'T GET IT
JUMPE T,TTYRE8 ;USE JOBDAT IF NOT SET UP YET
> ;END IFN FTEX20
ADDI R,.EDUSY-.EDSYM ;POINT TO USY TABLE WORD
PUSHJ P,CHKADR ;MAKE SURE ACCESSIBLE
TXC TT,PG$EXI!PG$REA!PG$WRT ;COMPLEMENT BITS THAT MUST BE ON
TXNE TT,PG$EXI!PG$REA!PG$WRT!PG$SPY!PG$ABZ ;ADDR OK?
JRST TTYRE8 ;NO, ABORT
MOVEM R,USYMP+S$SUB ;STASH FOR SYMCHK
SETZM HSYMP+S$SUB ;NO HISEG IN EXEC MODE
;CONTINUED ON NEXT PAGE
;STILL IFE FTFILE AND IFN FTEXEC!FTMON
;FALL IN FROM ABOVE
IFN FTDEC10,<
ADDI R,.EDHSF-.EDUSY ;POINT TO HIDDEN SYMBOL FLAG POINTER
PUSHJ P,FETCHV ;GET THE ADDRESS
JRST TTYRE8 ;NO GOOD
EXCH R,T ;SAVE IN T FOR A WHILE
PUSHJ P,CHKADR ;SEE ABOUT ADDRESS
TXC TT,PG$EXI!PG$REA!PG$WRT ;BITS THAT MUST BE ON
TXNE TT,PG$EXI!PG$REA!PG$WRT!PG$SPY ;IS BLOCK OK?
JRST TTYRE8 ;NO, DON'T USE IT
MOVEM R,ADRSPC ;SAVE FOR NEWSPC
HLROM T,SYTLOC ;SAVE SYMBOL SECTION NUMBER
MOVE T,TTEM1 ;ADDRESS OF MONITOR'S BLOCK OR ZERO
SKIPE @ADRSPC ;HIT BREAKPOINT INSIDE OTHER COPY OF DDT
;WHILE THAT DDT WAS IN ALTERNATE SPACE?
SETZ T, ;YES, WE WILL ALWAYS STAY IN SYMBOL SPACE
MOVEM T,HSBLK ;*** TURN ON HIDDEN SYMBOL PROCESSING ***
> ;END IFN FTDEC10
POPJ P, ;ALL DONE WITH TTYSAV
;HERE IF WE AREN'T GOING TO USE AN ALTERNATE SYMBOL ADDRESS SPACE.
TTYRE8:
IFN FTDEC10,<
SETZM HSBLK ;REMEMBER NOT TO
> ;END IFN FTDEC10
MOVE R,SECDDT ;GET OUR SECTION
HLROM R,SYTLOC ;TELL SYMCHK WHERE TO FIND SYMS
HRRI R,.JBSYM ;USUAL SPOT FOR DEFINED SYM POINTER
MOVEM R,SYMP+S$SUB ;TELL SYMCHK
HRRI R,.JBUSY ;AND UNDEFINED POINTER
MOVEM R,USYMP+S$SUB ;DITTO
SETZM HSYMP+S$SUB ;NO HISEG IN EXEC MODE
POPJ P, ;ALL DONE WITH TTYSAV
IFN FTDEC10,<
;ROUTINE TO CHECK SUB-SUB HIDDEN SYMBOL BLOCKS FOR VALIDITY.
;CALLED FROM CHKRNG.
HSBITS: TXC TT,PG$EXI!PG$REA!PG$WRT ;BITS THAT MUST BE ON
TXNN TT,PG$EXI!PG$REA!PG$WRT!PG$SPY ;BITS THAT MUST NOW BE OFF
AOS (P) ;GOOD, GIVE OK RETURN
POPJ P, ;RETURN TO CALLER
> ;END IFN FTDEC10
> ;END IFN FTEXEC!FTMON
;STILL IFE FTFILE
;TTYRES -- SUBROUTINE TO RESTORE THE TTY STATE BEFORE LEAVING DDT
;CALL:
; PUSHJ P,TTYRES
; RETURN
TTYRES:
IFN FTEXEC,<
SKPUSR
JRST XTTYLE
> ;END IFN FTEXEC
IFN FTDEC10,<
MOVE T,[2,,W1] ;CLRST. UUO: 2 ARGS, IN W1 AND W2
MOVX W1,SIXBIT/TTY/ ;DEVICE IS TTY:
HRRZ W2,SAVTTY ;RESTORE OLD SETSTS BITS
TRNE W2,-1 ;ANY STATUS TO [RE-]SET TO?
CLRST. T,UU.PHY ;DO IT
JFCL ;??
JRST TTYLE8 ;NOTE USER MODES AND RETURN
> ;END IFN FTDEC10
IFN FTDEC20,<
MOVEI T1,.PRIIN
MOVE T2,SAVTTY
SFMOD% ;RESTORE MODES
MOVE T2,SAVTT2
MOVE T3,SAVTT3
SFCOC% ;RESTORE CC MODES
MOVEI T1,.FHSLF
MOVE T2,SAVTIW ;RESTORE OLD TTY INTERRUPT MASK
STIW% ;DO IT
JRST TTYLE8 ;NOTE USER MODES AND RETURN
> ;END IFN FTDEC20
;STILL IFE FTFILE
IFN FTEXEC,<
;HERE TO RESTORE USER STATE (LEAVE DDT) WHEN IN EXEC MODE.
XTTYLE:
IFN FTDEC10,<PUSHJ P,NORSPC> ;GET BACK TO PROGRAM'S ADDRESS SPACE
SKPKL ;ON A KL-10?
JRST XTTYL2 ;NO, GO CHECK OTHER CPUS
;HERE IF ON A KL10. RESTORE THE DTE STATUS BLOCK STARTING AT DTEII,
;AND RESTORE THE ACCOUNTING AND TIMING METERS.
PUSHJ P,GVEPDT ;FIND MASTER DTE'S CHUNK OF THE EPT
MOVE W2,T ;SAVE A COPY
MOVE TT2,T ;DESTINATION TO RESTORE
ADDI TT2,DTEII ; STARTS HERE
XMOVEI TT1,SAVTTY ;WHERE TO RESTORE FROM
MOVEI TT,SAVDRW-SAVTTY+1 ;HOW MANY TO RESTORE
PUSHJ P,DOXBLT ;GO STUFF 'EM
HALT . ;CAN'T
HRRZ T,MTRCNI ;GET SAVED MTR CONI
CONO MTR,MTRLOD(T) ;RESTORE ALL STATES
HRRZ T,TIMCNI ;GET SAVED TIM CONI
TRZ T,TIMDON+TIMICO ;FLUSH CONI-ONLY BITS
CONO TIM,0(T) ;RESTORE STATE
SETZM SAVTTY ;NOTE PGM MODES NOW IN EFFECT
ADDI W2,DTEEPW ;POINT UP TO EXAMINE PROTECTION WORD
CONSZ PAG,PGTPEN ;IS PAGING NOW ENABLED?
SKIPN @W2 ;YES SECONDARY PROTOCOL IN EFFECT,
POPJ P, ;JUST RETURN, DON'T TURN IT OFF
MOVEI T,.DTNMC ;WE WERE IN REGULAR PROTOCOL, SETUP OFF COMMAND
;FALL INTO DTEDCM
;KL10 ROUTINE TO SEND A COMMAND TO THE MASTER 11 THROUGH THE DTE.
DTEDCM: EXCH TT,TT2 ;SAVE TT
PUSHJ P,GVEPT ;GET EPT BASE IN TT
HALT . ;NOT IN ADDRESS SPACE!
EXCH TT,TT2 ;PUT ADDRESS IN TT2
ADDI TT2,DTEFLG ;POINT TO DONE FLAG
SETZM @TT2 ;CLEAR DONE FLAG
ADDI TT2,DTECMD-DTEFLG ;POINT UP TO COMMAND WORD
MOVEM T,@TT2 ;STORE COMMAND FOR 11
XCT DING11 ;RING HIS DOORBELL
SUBI TT2,DTECMD-DTEFLG ;BACK TO FLAG
SKIPN @TT2 ;WAIT FOR FINISH
JRST .-1
POPJ P, ;RETURN
;STILL IFE FTFILE & IFN FTEXEC
;HERE IF NOT ON A KL10. CHECK TO SEE IF ON A KS10.
XTTYL2: SKPKS ;ON A KS10?
JRST XTTYL4 ;NO, SKIP ON
DMOVE TT1,[EXP 0,1000] ;GET A LITTLE TIME
DADD TT1,SAVTIM ;BUMP TIME A LITTLE TO KEEP KEEP ALIVE ALIVE
WRTIMS TT1 ;WRITE NEW TIMEBASE
MOVE T,SAVTTY ;GET BACK KEEP ALIVE
MOVEM T,RLWORD ;RESTORE ORIGINAL STATE
JRST TTYLE8 ;NOTE USER MODES AND RETURN
;HERE IF NOT ON A FANCY CPU. MUST BE ON A KA10 OR KI10.
XTTYL4: CONSZ TTY,120 ;WAIT FOR LAST OUTPUT
JRST .-1
CONO TTY,1200 ;CLEAR DONE FLAGS
MOVE T,SAVTTY
CONO TTY,0(T) ;RESTORE USER STATE
;FALL INTO TTYLE8
> ;END IFN FTEXEC
;COMMON RETURN FROM TTYLEV
TTYLE8:
IFN FTEXEC,<
SKPEXC ;USER MODE?
HLLZS TTYMSK ;YES, CLEAR FANCY <DEL> HANDLING IN CASE
; WE LATER GET ENTERED AT EXEC LEVEL
> ;END IFN FTEXEC
SETZM SAVTTY ;NOTE USER MODES NOW IN EFFECT
POPJ P, ;RETURN TO CALLER
> ;END IFE FTFILE
SUBTTL HIDE DDT'S PDV
;FIND AND REMEMBER WHERE DDT'S PDV IS, SO THAT NORMALLY WE WON'T USE
;IT FOR SYMBOLS. ASSUME A PDV IN OUR SECTION IS OUR PDV, SINCE THIS
;IS ONCE-ONLY CODE.
IFN FTUD20,< ;USER-20 DDT ONLY
HIDPDV: PUSHJ P,PDVINI ;SET UP PDVOP% BLOCK
HLLZ T1,SECDDT ;ONLY LOOK IN OUR SECTION
MOVEM T1,PDVARG+.POADR ;FOR OUR OWN PDV
HLLOM T1,PDVARG+.POADE
MOVX T1,.POLOC ;RETURN PDVS
XMOVEI T2,PDVARG ;ACCORDING TO THIS BLOCK
HRROI T3,[ASCIZ/DDT%/] ;WITH THIS NAME
PDVOP% ;DO IT TO IT
SKIPE PDVARG+.POCT2 ;FIND ONE?
SKIPA R,PDVA ;YES, GET THE ADDRESS
SETO R, ;NO, SET AN IMPOSSIBLE VALUE
MOVEM R,DDTPDV ;SAVE FOR SYMCHK
JUMPL R,CPOPJ ;RETURN IF NO PDV
;SET UP PROPER SYMBOL TABLE VECTOR IF WE WERE LOADED BY AN EARLY LINK
MOVE T,.PVCNT(R) ;GET LENGTH OF PDV
CAIGE T,.PVLVR ;LONG ENOUGH FOR LINK VERSION?
JRST HIDPD1 ;NO, ASSUME SYMBOL VECTOR IS OK
LDB T,[POINTR .PVLVR(R),VI%MAJ] ;GET LINK MAJOR VERSION
CAIL T,6 ;LINK V6 GOT IT RIGHT
JRST HIDPD1
MOVE T,.PVSYM(R) ;GET IOWD-STYLE .PVSYM
HRRM T,DDTSYV+2 ;SET DEFINED TABLE ADDRESS
HRRM T,DDTSYV+5 ;AND UNDEFINED TABLE ADDRESS
HLRE T,T ;GET NEG LENGTH
MOVN T,T ;WANT POS LENGTH
DPB T,[POINTR DDTSYV+1,ST%LEN] ;SET DEFINED LENGTH
MOVE T,[IFIW DDTSYV] ;OUR INTERNAL SYMBOL VECTOR
ADDI R,.PVSYM ;WANT TO WRITE TO .PVSYM WORD
PUSH P,PATCHS ;SAVE $W FLAG
SETOM PATCHS ;PRETEND $W IN EFFECT
PUSHJ P,STOREV ;STORE INTO PDV EVEN IF WRITE-LOCKED
JFCL ;CAN'T HAPPEN
ADDI R,.PVLVR-.PVSYM ;UPDATE LINK VERSION NUMBER
MOVX T,FLD(6,VI%MAJ) ; SO WE'LL USE THE SYMBOL VECTOR
PUSHJ P,STOREV ;STUFF FAKE VERSION
JFCL ;CAN'T HAPPEN
SUBI R,.PVLVR-.PVNAM ;BACK DOWN TO NAME WORD
MOVX T,IFIW ;NOW MAKE NAME WORD LOCAL FORMAT
HRR T,(R) ;PRESERVE RIGHT HALF
PUSHJ P,STOREV ;STUFF NEW VALUE
JFCL ;CAN'T HAPPEN
POP P,PATCHS ;RESTORE DEFAULT $W VALUE
HIDPD1: SETZM SARS ;PRETEND WE NEVER RAN
SETZM SAVTTY ;FORGET SAVED TTY STUFF TOO
HALTF% ;ALL DONE, READY TO SAVE DDT
;DEFINE EXPORT VECTOR FOR USER-20 DDT
DDTEXP: EXP EXP.L ;LENGTH OF BLOCK
IFIW DDT ;DDT'S START ADDRESS
IFIW $0BPT ;UNSOLICITED BREAKPOINT ADDRESS
IFIW SYTLOC ;$5M (TO SPECIFY SYM TABLES)
IFIW SECUDD ;SECTION OF UDDT STUB
EXP.L==.-DDTEXP
DDTXPT==:<IFIW DDTEXP> ;HACK FOR /PVDATA:START: SWITCH
> ;END IFN FTUD20
SUBTTL STORAGE -- LITERALS AND END OF CODE
XLIST ;THE LITERALS
LIT
LIST
IFGE RUNLOC,<IFGE VARLOC,<IFL <VARLOC-RUNLOC>,<
DDTEND:>>> ;DEFINE HERE IF VARIABLES BELOW CODE
END.C: ;END OF CODE
LEN.C==END.C-BEG.C ;DEFINE HERE TO NOT CONFUSE MACRO
IFGE VARLOC,< ;IF VARIABLES WANT TO GO SOMEWHERE,
;WE NEED TO CLOSE OFF THE CODE
IFN FTEX20,<
.ENDPS INCOD ;CLOSE OFF -20 EDDT PSECT
>
IFGE RUNLOC,<
IFE FTEX20!FTPURE,<
.ENDPS DDTCOD ;CLOSE OFF USER CODE PSECT
>
> ;END IFGE RUNLOC
;NOW START THE VARIABLES IN THE RIGHT PLACE
IFE FTEX20!FTPURE,<
.PSECT DDTVAR/RWRITE,VARLOC ;PUT VARS WHERE THEY BELONG
>
> ;END IFGE VARLOC
IFN FTPURE,<
PHVAR:! ;PURE COPY OF VARIABLES
> ;END IFN FTPURE
IFGE RUNLOC,<IFGE VARLOC,<IFL <VARLOC-RUNLOC>,<
DDTBEG:!>>> ;DEFINE HERE IF VARIABLES BELOW CODE
SUBTTL STORAGE -- ALLOCATION MACROS
;MACROS TO DEFINE DATA
IFE FTPURE,< ;NORMAL DDTS
DEFINE DD(NAME,SIZE,CONTENTS)<
IFNB <NAME>,<NAME:>
..DD==.
IFNB <CONTENTS>,<
IRP <CONTENTS>,<CONTENTS>>
BLOCK <SIZE>-<.-..DD>
> ;END OF DD DEFINITION
;SUPPRESSED DD
DEFINE DDS(NAME,SIZE,CONTENTS)<
IFNB <NAME>,<NAME:!>
..DD==.
IFNB <CONTENTS>,<
IRP <CONTENTS>,<CONTENTS>>
BLOCK <SIZE>-<.-..DD>
> ;END OF DDS DEFINITION
> ;END IFE FTPURE
IFN FTPURE,< ;IN MDDT, THE TAGS ARE OFFSETS
;FROM DDTPGA.
IFE FTMON,<DDTPGA==VARLOC> ;OTHER PURE DDT'S WILL TRACK IT
..DDPC==0 ;HOW MANY LOCATIONS ALLOCATED SO FAR
DEFINE DD(NAME,SIZE,CONTENTS)<
IFNB <NAME>,<NAME=DDTPGA+..DDPC>
..DDPC==..DDPC+<SIZE>
..DD==.
IFNB <CONTENTS>,<
IRP <CONTENTS>,<CONTENTS>>
BLOCK <SIZE>-<.-..DD>
> ;END OF DD DEFINITION
DEFINE DDS(NAME,SIZE,CONTENTS)<
IFNB <NAME>,<NAME==DDTPGA+..DDPC>
..DDPC==..DDPC+<SIZE>
..DD==.
IFNB <CONTENTS>,<
IRP <CONTENTS>,<CONTENTS>>
BLOCK <SIZE>-<.-..DD>
> ;END OF DDS DEFINITION
> ;END OF IFN FTPURE
SUBTTL FILDDT -- COMMAND SCANNER
IFN FTFILE,<
;CODE COMMON TO ALL FLAVORS OF FILE DDTS
IFN FTDBUG,<
DEBDDT:>
DDT: JFCL ;IN CASE OF CCL ENTRY
INIPDL ;PRESET PUSH DOWN LIST
IFN FTYANK,<
SETZM COMAND> ;CLEAR $Y FLAG
SETZM MAPFN ;CLEAR $U POINTERS
SETOM EPTWRD ;CLEAR OTHER PAGING POINTERS
SETOM UPTWRD ; . . .
SETOM SPTWRD ; . . .
SETOM CSTWRD ; . . .
SETZM FAKEAC ;ASSUME TRUE 0 - 17
SETZM PATCHS ;PATCHING NOT LEGAL
SETOM LASTPG ;WE KNOW NOTHING ABOUT ANY PAGE
SETZM FWAZER ;CLEAR BLOCK OF STORAGE
MOVE T,[FWAZER,,FWAZER+1]
BLT T,LWAZER-1
SETOM FWAONE ;"CLEAR" BLOCK OF STORAGE
MOVE T,[FWAONE,,FWAONE+1] ;BLT POINTER TO
BLT T,LWAONE-1 ;INITIALIZE WINDOW POINTERS ET AL
PUSHJ P,CLRCSH ;ZERO OUT THE SYMBOL TABLE CACHE
;FALL INTO OPERATING-SYSTEM DEPENDENT STARTUP CODE
;STILL IFN FTFILE
IFN FTDEC10,< ;TOPS-10 STYLE COMMAND SCANNING
;SCAN COMMAND LINE AND FIGURE OUT WHAT TO DO
;NOTE THAT WE FALL HERE FROM FILDDT STARTUP
FDIFS: RESET ;STOP THE WORLD
SETZM JOBEDV ;WE HAVE NO USEFUL EXEC DATA VECTOR
MOVX W1,.TODIS ;TERMINAL-IS-A-DISPLAY FUNCTION
SKIPN W2,TTDEV ;GOT AN $Y'ED TERMINAL?
SETO W2, ;NO, USE CONTROLLING TERMINAL
MOVE T,[2,,W1] ;TRMOP. ARG POINTER TO
TRMOP. T, ;READ DISPLAY SETTING
SETZ T, ;DUH?
DPB T,[POINTR TTYMSK,TT$DEL] ;SET <DEL> HANDLING
MOVEI T,1 ;USER MODE TAB SUPPORT
DPB T,[POINTR TTYMSK,TT$TAB] ;SET <TAB> LITERAL MODE
;NOW READ IN WHAT USER WANTS US TO DO
TMSG <File: > ;PROMPT USER FOR FILE SPEC
MOVEI S,FDISWT ;FILDDT SWITCH TABLE
PUSHJ P,FSCAN ;INPUT FILE SPEC ET ALL
JRST FDIERR ;ERROR, MESSAGE ALREADY ISSUED
SKIPN TT,FSBLK ;ANYTHING EXCITING HAPPEN?
JRST FDIFS ;NO, TRY AGAIN
SKIPE FDIFSW ;/F SPECIFIED?
TXNE TT,FS$FIL ;SEE A FILE SPEC (ANY PORTION THEREOF)?
CAIA ;YES, THEN OK
JRST FDEENF ;NO, NULL FILE SPEC ILLEGAL WITH /F
MOVE T,FDIDSW ;SEE IF /D
IOR T,PHYSIO ;OR /U
JUMPE T,FDIFS2 ;/D .OR. /U
SKIPE SYMGET ;.AND. /S ???
JRST FDEEDS ;YES, ILLEGAL COMBINATION
FDIFS2: MOVE T,FDIDSW ;/D?
IOR T,FDIFSW ;OR /F
IOR T,SYMGET ;OR /S
IOR T,PHYSIO ;OR /U
JUMPE T,FDIFS4 ;/D .OR. /F .OR. /S .OR. /U
SKIPE FDIMSW ;.AND. /M ???
JRST FDEERM ;YES, ILLEGAL COMBINATION
FDIFS4: SKIPE JOBING ;/J?
SETOM FDIMSW ;YES, PRETEND /M
SKIPN FDIMSW ;/M SPECIFIED?
JRST FDIDF ;NO, FILING OF SOME SORT
;FALL INTO MONITOR/MEMORY PEEKING INITIALIZATION
;STILL IFN FTFILE & IFN FTDEC10
;FALL HERE FROM PREVIOUS PAGE
;INITIALIZE FOR PEEKING AT RUNNING MONITOR/MEMORY
FDIDM: SETZM FILING ;NOTE NO FILE'ING IN PROGRESS
SETOM FAKEAC ;NEVER ANY MONITOR "ACS" FOR /M
SETZM AC0 ;IT IS NICER TO GIVE 0'S
MOVE T,[AC0,,AC0+1] ;BLT POINTER TO
BLT T,AC17 ;INITIALIZE MONITOR ACS
MOVX T,%NSMMS ;ASK FOR MEMORY SIZE
SKIPN JOBING ;/J?
GETTAB T, ;NO, MONITOR
MOVSI T,1 ;REASONABLE DEFAULT
MOVEM T,MAXSIZ ;SAVE FOR LATER CHECKING
SKIPE JOBING ;/J AGAIN?
JRST FDIJ0 ;YES
PUSHJ P,FDINFO ;PRINT INTERESTING MESSAGE
JRST FDIGO ;GO FINISH UP
FDIJ0: SETZ TT, ;INITIALIZE JOB NUMBER
MOVE TT2,FSFIL ;JOB NUMBER (IN SIXBIT)
FDIDJ: SETZ TT1, ;MAKE READY FOR
LSHC TT1,6 ;NEXT DIGIT
IMULI TT,^D10 ;JOB NUMBERS ARE DECIMAL
ADDI TT,-'0'(TT1) ;THIS DECADE
JUMPN TT2,FDIDJ ;LOOP
JUMPE TT,FDEERJ ;0 IS ILLEGAL JOB NUMBER
MOVX TT1,%CNSJN ;SEGMENT/JOB NUMBERS
GETTAB TT1, ;-SEGN,,JOBN
MOVEI TT1,^D511 ;DEFAULT JOBN
CAILE TT,(TT1) ;REASONABLE JOB NUMBER?
JRST FDEERJ ;NO, ERROR
MOVEM TT,JOBING ;YES, REMEMBER IT
SETZM FAKEAC
PUSHJ P,FDINFO ;TYPE INTERESTING STUFF
JRST FDIGO ;DONE
;STILL IFN FTFILE & IFN FTDEC10
;HERE FOR SOME TYPE OF (DISK) FILE I/O
FDIDF: SKIPN PHYSIO ;/U?
JRST FDIDF3 ;NO, REGULAR
;DEFAULTS FOR PHYSICAL UNIT I/O
SETOM FDIDSW ;YES, FORCE PURE DATA FORMAT
SKIPN FSDEV ;EXPLICIT STRUCTURE SUPPLIED?
JRST FDEERU ;NO, ERROR
JRST FDIDF6 ;CONTINUE WITH SETUP
;HERE FOR REGULAR FILE DEFAULTING
FDIDF3: MOVSI T,'DSK' ;DEFAULT INPUT DEVICE
SKIPN FSDEV ;USER GIVE A DEVICE?
MOVEM T,FSDEV ;NO, SUPPLY DEFAULT
SKIPN FSFIL ;HOW ABUT A FILENAME?
JRST FDENFI ;NULL FILENAME ILLEGAL
SKIPE FDIDSW ;/D?
JRST FDIDF6 ;YES, NO DEFAULT EXTENSION
MOVSI T,'EXE' ;DEFAULT EXTENSION
SKIPN FSEXT ;USER TYPE AN EXTENSION?
HLLOM T,FSEXT ;NO, USE DEFAULT
;STILL IFN FTFILE & IFN FTDEC10
;INITIALIZE FOR FILE I/O
FDIDF6: MOVEI T,[FLPLEN,,FLPBLK ;LEN,,ADR OF FILOP. BLOCK
LKPLEN,,LKPBLK ;LEN,,ADR OF LOOKUP BLOCK
PTHLEN,,PTHBLK ;LEN,,ADR OF PATH BLOCK
RFSLEN,,RFSBLK] ;LEN,,ADR OF RETURNED FILESPEC BLOCK
PUSHJ P,FSFSET ;INITIALIZE FILOP. BLOCK
HALT DDT ;INTERNAL ERROR
MOVEI T,.FORED ;ASSUME WANT TO READ FILE
SKIPE PATCHS ;WANT TO WRITE AS WELL?
MOVEI T,.FOSAU ;YES, SINGLE ACCESS UPDATE THEN
SKIPE PHYSIO ;BUT WAIT - /U?
MOVEI T,.FOSIO ;YES, THEN REALLY WANT SUPER I/O
HRLI T,400000+FIL ;SLIP IN THE CHANNEL NUMBER
MOVEM T,FLPBLK+.FOFNC ;SETUP FUNCTION WORD
MOVEI T,.IODMP ;DUMP MODE I/O
MOVEM T,FLPBLK+.FOIOS ;SETUP I/O STATUS WORD
MOVE T,[FLPLEN,,FLPBLK] ;ADDRESS OF FILOP. BLOCK TO
FILOP. T, ;GET AN INPUT FILE
JRST FDIDF9 ;ERROR
MOVEI T,FIL ;INPUT FILE CHANNEL
DEVCHR T, ;ASK ABOUT WHAT WE GOT
TXNN T,DV.DSK ;IS IT A DISK?
JRST NOTDSK ;NO, ERROR
MOVE T,LKPBLK+.RBSIZ ;FILE SIZE, IN WORDS
MOVEM T,MAXSIZ ;SET MAX SIZE ALLOWABLE
JRST FDIOPN ;GO PROCESS
;HERE ON FILOP. ERROR
FDIDF9: SKIPE PHYSIO ;/U?
PUSHJ P,[CAIE T,ERILU% ;"ILLEGAL UUO" ?
POPJ P, ;NO, THEN REAL ERROR
OPEN FIL,FLPBLK+.FOIOS ;YES, DO IT THE OLD WAY
JRST [ MOVEI T,ERILU% ;WHAT THE HEX
POPJ P,] ;RETURN WITH ERROR CODE
POP P,T ;ADJUST STACK
JRST FDIOPN] ;HANDLE OPEN FILE
MOVEI ODF,10 ;SETUP TO TYPE OCTAL FILOP. ERROR CODE
JRST FDEFFF ;REAL FILOP. ERROR
;STILL IFN FTFILE & IFN FTDEC10
;FILDDT SWITCH TABLE
FDISWT: JRST FSEILS ;A - ILLEGAL
JRST FSEILS ;B - ILLEGAL
JRST FSEILS ;C - ILLEGAL
SETOM FDIDSW ;D - DATA FORMAT
JRST FSEILS ;E - ILLEGAL
SETOM FDIFSW ;F - FILDDT IT ANYWAY (WITH /S)
JRST FSEILS ;G - ILLEGAL
JRST FDIHLP ;H - HELP
JRST FSEILS ;I - ILLEGAL
SETOM JOBING ;J - LOOK AT A USER JOB
JRST FSEILS ;K - ILLEGAL
JRST FSEILS ;L - ILLEGAL
SETOM FDIMSW ;M - LOOK AT RUNNING MONITOR
JRST FSEILS ;N - ILLEGAL
JRST FSEILS ;O - ILLEGAL
SETOM PATCHS ;P - ENABLE PATCHING
JRST FSEILS ;Q - ILLEGAL
JRST FSEILS ;R - ILLEGAL
SETOM SYMGET ;S - EXTRACT SYMBOL TABLE
JRST FSEILS ;T - ILLEGAL
SETOM PHYSIO ;U - SUPER IO TO DISK UNITS
JRST FSEILS ;V - ILLEGAL
JRST FSEILS ;W - ILLEGAL
JRST FSEILS ;X - ILLEGAL
JRST FSEILS ;Y - ILLEGAL
JRST FSEILS ;Z - ILLEGAL
;STILL IFN FTFILE & IFN FTDEC10
FDIHLP: TMSG <
Type dev:file.ext[path]/switches
/D Treat file as pure binary data, not code
/F FILDDT this file anyway (used with /S)
/H Type this text
/M Examine running monitor
/P Patch monitor or file
type ^Z to exit from file patching
/S Load symbol table from file
/U Physical ("super") I/O to disk unit
<CTRL/E> closes the currently open file and restarts FILDDT.
> ;GIVE A HELP MESSAGE
JRST DDT ;RESET AND SCAN AGAIN
;GENERAL FILE DDT COMMAND ERRORS
FDEEDS: TMSG <? /S illegal with /D or /U>
JRST FDEERR
FDEENF: TMSG <? Null file spec with /F>
JRST FDEERR
FDEERU: TMSG <? Explicit structure required with /U>
JRST FDEERR ;COMMON ERROR EXIT
FDEERM: TMSG <? /M illegal with /D, /F, /S, or /U>
JRST FDEERR
FDEERJ: TMSG <? Illegal job number>
JRST FDEERR
;FILE DDT ERROR MESSAGES DUPLICATED IN FSCAN
FDENFI: PUSHJ P,FSENFI ;COMPLAIN
JRST FDIERR ;GO CLRBFI
FDEFFF: PUSHJ P,FSEFFF ;COMPLAIN
JRST FDIERR ;CLRBFI AND RESTART DDT
> ;END OF IFN FTDEC10
;STILL IFN FTFILE
IFN FTDEC20,< ;FILE SELECTION FOR TOPS-20
NCHPW==5 ;NUMBER OF ASCII CHARACTERS PER WORD
BUFSIZ==200 ;SIZE OF INPUT TEXT BUFFER
ATMSIZ==BUFSIZ ;SIZE OF ATOM BUFFER FOR COMND JSYS
GJFSIZ==.GJRTY+2 ;SIZE OF GTJFN BLOCK USED BY COMND JSYS
FDBSIZ==.CMDEF+2 ;SIZE OF FUNCTION DESCRIPTOR BLOCK
;STILL IFN FTFILE & IFN FTDEC20
;SCAN COMMAND LINE AND FIGURE OUT WHAT TO DO
;NOTE THAT WE FALL HERE FROM FILDDT STARTUP
CPARS: MOVEI T1,677777 ;MAXIMUM SIZE WE WANT TO USE
MOVEM T1,.JBREL ;SAVE FOR TESTS
HRROI T1,PROMPT ;GET POINTER TO PROMPT STRING
MOVEM T1,CMDBLK+.CMRTY ;SAVE IN STATE BLOCK
HRROI T1,BUFFER ;GET POINTER TO INPUT TEXT BUFFER
MOVEM T1,CMDBLK+.CMPTR ;SAVE POINTER TO COMMAND STRING
MOVEM T1,CMDBLK+.CMBFP ;SAVE POINTER TO START-OF-BUFFER
MOVE T1,[.PRIIN,,.PRIOU] ;GET PRIMARY INPUT,, OUTPUT JFN'S
MOVEM T1,CMDBLK+.CMIOJ ;SAVE PRIMARY JFN'S
SETZM CMDBLK+.CMINC ;INITIALIZE # OF CHARS AFTER POINTER
MOVEI T1,BUFSIZ*NCHPW ;GET # OF CHARS IN BUFFER AREA
MOVEM T1,CMDBLK+.CMCNT ;SAVE INITIAL # OF FREE CHAR POSITIONS
HRROI T1,ATMBFR ;GET POINTER TO ATOM BUFFER
MOVEM T1,CMDBLK+.CMABP ;SAVE POINTER TO LAST ATOM INPUT
MOVEI T1,ATMSIZ*NCHPW ;GET # OF CHARACTERS IN ATOM BUFFER
MOVEM T1,CMDBLK+.CMABC ;SAVE COUNT OF SPACE LEFT IN ATOM BUFFER
PARSE: HRROI T1,PROMPT ;GET POINTER TO PROGRAM'S PROMPT STRING
PUSHJ P,CMDINI ;OUTPUT THE PROMPT
PARSE1: INIPDL ;SET UP STACK AGAIN
RESET% ;CLEAR EVERYTHING
SETZM FCMZER ;ZERO VARIABLES IN CASE OF ERROR
MOVE T1,[FCMZER,,FCMZER+1] ; SINCE SOME ROUTINES SET VALUES
BLT T1,LWAZER-1 ; THEN DISCOVER ERRORS
MOVEI T1,GJFBLK ;GET ADDRESS OF GTJFN BLOCK
MOVEM T1,CMDBLK+.CMGJB ;STORE POINTER TO GTJFN BLOCK
MOVEI T1,CMDBLK ;GET POINTER TO COMMAND STATE BLOCK
MOVEI T2,[FLDDB. (.CMKEY,,CMDTAB)] ;GET FUNCTION BLOCK
COMND% ;DO INITIAL PARSE
TXNN T1,CM%NOP ;VALID COMMAND ENTERED ?
JRST PARSE5 ;YES, GO DISPATCH TO PROCESSING ROUTINE
HRROI T1,[ASCIZ\No such command as\]
PUSHJ P,TYPATM ;COMPLAIN
JRST PARSE ;GO TRY TO GET A COMMAND AGAIN
PARSE5: HRRZ T1,(T2) ;GET DISPATCH ADDRESS
PUSHJ P,(T1) ;PERFORM REQUESTED FUNCTION
JRST PARSE ;GO PARSE NEXT COMMAND
;STILL IFN FTFILE & IFN FTDEC20
; HELP COMMAND
.HELP: HRROI T2,[ASCIZ/WITH FILDDT/] ;GET NOISE WORDS
PUSHJ P,SKPNOI ;GO PARSE NOISE FIELD
POPJ P, ;FAILED, RETURN FAILURE
PUSHJ P,ENDCOM ;GO PARSE END OF COMMAND
POPJ P, ;BAD CONFIRMATION, RETURN
HRROI T1,HLPMSG ;GET POINTER TO HELP MESSAGE
PSOUT% ;OUTPUT HELP MESSAGE
POPJ P, ;GO PARSE NEXT COMMAND
; EXIT COMMAND
.EXIT: HRROI T2,[ASCIZ/TO MONITOR/] ;GET NOISE PHRASE
PUSHJ P,SKPNOI ;GO PARSE NOISE FIELD
POPJ P, ;FAILED, RETURN FAILURE
PUSHJ P,ENDCOM ;GO PARSE END OF COMMAND
POPJ P, ;BAD CONFIRMATION, RETURN
RESET% ;CLEAN UP
HALTF% ;BACK TO MONITOR
JRST DDT ;GO GET ANOTHER COMMAND
; PEEK COMMAND
.PEEK: HRROI T2,[ASCIZ /AT RUNNING MONITOR/]
PUSHJ P,SKPNOI ;TELL HIM
POPJ P,
PUSHJ P,ENDCOM ;GET CR
POPJ P, ;ERROR
SKIPN PATCHS ;DOES USER WANT TO PATCH THE MONITOR?
JRST PEEK2 ;NO
TMSG <% Patching the running monitor is illegal
> ;YES, WARN THE USER
SETZM PATCHS ;FOR SAFETY
PEEK2: SETZM FILING ;NO FILE
MOVX T1,.INFIN ;NO ARTIFICAL RESTRICTIONS ON ADDRESSES
MOVEM T1,MAXSIZ ;SINCE PEEK JSYS WILL TELL US
SETOM FAKEAC ;USE ARTIFICIAL ACS
SETZM AC0 ;IT'S BETTER TO GIVE HIM 0
MOVE T1,[AC0,,AC0+1] ;THAN OLD JUNK
BLT T1,AC0+17 ; . . .
PUSHJ P,FDINFO ;TYPE USEFUL INFO
JRST FDIGO ;GO TO IT
;STILL IFN FTFILE & IFN FTDEC20
.GET: HRROI T2,[ASCIZ 'FILE']
PUSHJ P,SKPNOI
POPJ P,
SKIPN FDIDSW ;DATA FILE?
JRST GET01 ;NO, GO DEFAULT TO .EXE
SETZM GJFBLK+.GJEXT ;DATA FILES HAVE NO FILE DEFAULTS
JRST GET02 ;OK, GO OPEN THE FILE
GET01: HRROI T1,[ASCIZ 'EXE'] ;DEFAULT EXTENSION
MOVEM T1,GJFBLK+.GJEXT ;STORE FOR COMND
GET02: SETZM SYMGET ;INDICATE GET, NOT LOAD
;LOAD COMMAND ENTERS HERE TO OPEN THE FILE, WITH SYMGET SET TO -1
GET03: MOVX T1,GJ%OLD
MOVEM T1,GJFBLK+.GJGEN
MOVEI T1,CMDBLK
MOVEI T2,[FLDDB. (.CMFIL)]
COMND%
TXNN T1,CM%NOP ;SPEC OK?
JRST GET10
PUSHJ P,TSTCOL ;SEE IF CRLF NEEDED
TMSG <? Invalid file specification, >
PJRST PUTERR ;OUTPUT ERROR STRING TO TERMINAL
GET10: HRRZM T2,FILJFN ;SAVE FILE JFN FOR LATER USE
SKIPE SYMGET ;LOAD OR GET COMMAND?
SKIPA T2,[CFMBLK] ;DON'T ALLOW SWITCHES ON LOAD
GET20: MOVEI T2,SWTBLK ;NOW ASK FOR SWITCHS OR EOL
COMND% ;ASK THE USER
TXNE T1,CM%NOP ;DID IT WORK?
JRST CFMERR ;NO, GO COMPLAIN
HRRZ T3,T3 ;ADDRESS OF BLOCK COMND FOUND
CAIN T3,CFMBLK ;EOL OR SWITCH?
JRST GET30 ;EOL, GO PROCESS
HRRZ T2,(T2) ;GET SWITCH PROCESSING ADDRESS
PUSHJ P,(T2) ;CALL PROCESSING ROUTINE
JRST GET20 ;LOOP FOR MORE SWITCHES
;STILL IFN FTFILE & IFN FTDEC20
;HERE WHEN THE LINE HAS BEEN SCANNED. CHECK SEMANTICS AND OPEN THE FILE.
GET30: HRROI T1,NAMBUF ;STORE FILE-SPEC
MOVE T2,FILJFN ;RETRIEVE JFN OF USER'S FILE
SETZ T3,
JFNS%
MOVE T1,FILJFN ;JFN OF FILE USER TYPED
DVCHR% ;FIND OUT ABOUT IT
HLRZ T1,T1 ;GET DEVICE TYPE CODE
CAIE T1,.DVDES+.DVDSK ;IS THIS A DISK DEVICE?
PJRST NOTDSK ;NO, COMPLAIN AND RETURN
MOVE T1,FILJFN ;SETUP JFN TO OPEN
MOVX T2,OF%RD!OF%WR!OF%THW ;SET UP FOR THAWED AND PATCH
SKIPN FDIFSW ;USE PATCHS IF GET /S
SKIPN SYMGET ;ALWAYS READ-ONLY IF LOADING SYMBOLS
SKIPN PATCHS ;WANT PATCHING?
TXZ T2,OF%WR ;NO, CLEAR WRITE BIT.
SKIPN THAWSW ;THAWED ACCESS?
TXZ T2,OF%THW ;NO, CLEAR THAWED BIT.
TXNN T2,OF%WR!OF%THW ;WRITE OR THAWED SET?
TXO T2,OF%RDU ;NO, SET UNRESTICTED READ
OPENF% ;OPEN USER'S FILE
ERJMP PUTERQ ;FAILED, COMPLAIN TO USER
GET40: FFFFP% ;LOOK FOR FIRST FREE PAGE
JUMPL T1,GET50 ;NO FREE PAGES, USE LONG FILE CHECK
HRRZ T3,T1 ;SAVE FIRST FREE PAGE NUMBER
FFUFP% ;ANY USED PAST THAT? (COULD BE HOLE...)
ERJMP [ CAIE T1,FFUFX3 ;SEE IF NO MORE USED PAGES
JRST GET50 ;SOME OTHER PROBLEM
JRST GET60] ;NO MORE USED PAGES, WE HAVE EOF
MOVSS T1 ;SET UP ARG FOR FFFFP%
JRST GET40 ;AND MOVE PAST THIS HOLE
GET50: MOVE T1,FILJFN ;GET JFN FOR LONG FILE CHECK
MOVE T2,[1,,.FBCTL] ;WANT FLAG WORD FROM FDB
MOVEI T3,T4 ;RETURN IN T4
GTFDB%
MOVX T3,^D512 ;NUM. PAGES IN SHORT FILE
TXNE T4,FB%LNG ;IS IT A SHORT FILE?
MOVX T3,^D512*^D512 ;NO, LONG FILE HAS MORE PAGES
GET60: LSH T3,PG2WRD ;WANT NUM. WORDS IN FILE
MOVEM T3,MAXSIZ ;SAVE FOR FUTURE USE
JRST FDIOPN ;ALL OPEN
;SWITCH PROCESSING ROUTINES (SOME SAME AS ENABLE KEYWORD ROUTINES)
.SYMBL: SETOM SYMGET ;READ THE SYMBOLS FROM THIS FILE
SETOM FDIFSW ;BUT READ IT IN ANYWAY
POPJ P,
;STILL IFN FTFILE & IFN FTDEC20
.LOAD: HRROI T2,[ASCIZ 'SYMBOLS FROM']
PUSHJ P,SKPNOI
POPJ P,
HRROI T1,[ASCIZ 'EXE']
MOVEM T1,GJFBLK+.GJEXT ;DEFAULT EXTENSION IS EXE
SETOM SYMGET ;FLAG SYMBOL GET
JRST GET03 ;JOIN COMMON CODE
.ENBLE: MOVEI T1,CMDBLK
MOVEI T2,[FLDDB. (.CMKEY,,KEYTAB)]
COMND%
TXNN T1,CM%NOP
JRST ENAB10
HRROI T1,[ASCIZ \No keyword\]
PJRST TYPATM ;ILLEGAL KEYWORD, GO COMPLAIN
ENAB10: PUSH P,T2 ;SAVE INDEX
PUSHJ P,ENDCOM
JRST [ POP P,T1
POPJ P,] ;ERROR RETURN
POP P,T2 ;RESTORE INDEX
HRRZ T1,(T2) ;GET DISPATCH
JRST (T1) ;GO DO IT
.PATCH: SETOM PATCHS ;SET PATCHING
POPJ P,
.DATA: SETOM FDIDSW ;SET DATA FILE
POPJ P,
.THAWD: SETOM THAWSW ;SET THAWED ACCESS TO FILE
POPJ P,
;STILL IFN FTFILE & IFN FTDEC20
;PHYSICAL/SUPER I/O COMMANDS
.STRUC: HRROI T2,[ASCIZ 'FOR PHYSICAL I/O IS']
PUSHJ P,SKPNOI ;TELL USER WE WANT A STRUCTURE NAME
POPJ P,
MOVEI T2,[FLDDB. (.CMDEV)] ;GET A DEVICE
COMND%
TXNE T1,CM%NOP ;GET SOMETHING?
JRST PUTERQ ;NO, COMPLAIN
MOVEM T2,PHYARG ;YES, STORE DESIGNATOR FOR DSKOP
PUSHJ P,ENDCOM ;CLOSE OFF COMMAND LINE
POPJ P, ;ERROR, GIVE UP
HLRZ T1,PHYARG ;GET DEVICE TYPE
CAIE T1,.DVDES+.DVDSK ;A DISK?
PJRST NOTDSK ;NO, GO COMPLAIN
MOVX T1,FLD(.DOPSR,DOP%AT)!DOP%SN
MOVEM T1,PHYSIO ;SET ARB STRUCTURE DSKOP ARG
SETOM FDIDSW ;FORCE DATA-FILE (NOT EXE)
JRST FDIOPN ;GO SETUP TO DO PHYSICAL I/O
.DRIVE: HRROI T2,[ASCIZ 'FOR PHYSICAL I/O IS ON CHANNEL']
PUSHJ P,SKPNOI ;TELL USER WHAT WE WANT
POPJ P, ;ERROR
MOVEI T2,[FLDDB. (.CMNUM,,^D10)]
COMND% ;PARSE AN DECIMAL NUMBER
TXNE T1,CM%NOP ;ERROR?
JRST PUTERQ ;YES, GO COMPLAIN
SKIPL T2 ;CHANNEL NEGATIVE?
CAILE T2,<.RTJST(-1,DOP%C2)> ;OR TOO LARGE?
JRST ILLCHN ;YES, COMPLAIN
STOR T2,DOP%C2,PHYARG ;STORE CHANNEL AWAY
HRROI T2,[ASCIZ 'CONTROLLER'] ;GET NOISE
PUSHJ P,SKPNOI ;SAY WHAT WE WANT
POPJ P, ;ERROR
MOVEI T2,[FLDDB. (.CMNUM,,^D10,,<-1>)] ;PARSE DECIMAL NUMBER
COMND% ;DO IT, WITH A DEFAULT OF -1
TXNE T1,CM%NOP ;ERROR?
JRST PUTERQ ;YES, GO COMPLAIN
CAML T2,[-1] ;TOO SMALL?
CAILE T2,<.RTJST(-1,DOP%K2)>-1 ;OR TOO LARGE?
JRST ILLCTL ;YES, COMPLAIN
STOR T2,DOP%K2,PHYARG ;STORE CONTROLLER NUMBER
HRROI T2,[ASCIZ 'UNIT']
PUSHJ P,SKPNOI ;WE NOW WANT A UNIT
POPJ P, ;ERROR
MOVEI T2,[FLDDB. (.CMNUM,,^D10)]
COMND% ;PARSE A DECIMAL UNIT NUMBER
TXNE T1,CM%NOP ;ERROR?
JRST PUTERQ ;YES, COMPLAIN
SKIPL T2 ;SEE IF UNIT NUMBER IS NEGATIVE
CAILE T2,<.RTJST(-1,DOP%U2)> ;OR TOO LARGE
JRST ILLUNI ;YES, COMPLAIN
STOR T2,DOP%U2,PHYARG ;STORE UNIT NUMBER ALSO
PUSHJ P,ENDCOM ;END LINE
POPJ P, ;ERROR
MOVX T1,FLD(.DOPPU,DOP%AT)!DOP%CN!DOP%UN ;PHYSICAL DRIVE CODE
;AND LARGE CHANNEL TO CATCH OLD STYLE DSKOP
MOVEM T1,PHYSIO ;STORE DSKOP ARG
SETOM FDIDSW ;REMEMBER NOT AN EXE FILE
JRST FDIOPN ;GO OPEN THINGS UP AND START DDT
;STILL IFN FTFILE & IFN FTDEC20
;COMMAND ERROR SUBROUTINES
; INVALID END-OF-COMMAND
CFMERR: PUSHJ P,TSTCOL ;TEST COLUMN POSITION
TMSG <? Garbage at end-of-command
> ;OUTPUT ERROR MESSAGE
POPJ P, ;RETURN TO WHENCE WE CAME ...
;ROUTINES TO TYPE ERRORS FOR INVALID DRIVE NUMBERS
ILLCHN: PUSHJ P,TSTCOL ;TEST COLUMN POSITION
TMSG <? Illegal channel number
>
POPJ P, ;RETURN
ILLCTL: PUSHJ P,TSTCOL ;TEST COLUMN POSITION
TMSG <? Illegal controller number
>
POPJ P, ;ERROR
ILLUNI: PUSHJ P,TSTCOL ;TEST COLUMN POSITION
TMSG <? Illegal unit number
>
POPJ P, ;ERROR
;STILL IFN FTFILE & IFN FTDEC20
; ROUTINE TO OUTPUT THE JSYS MESSAGE ON AN ERROR FROM A GTJFN OR OPENF
;
; CALL:
; PUSHJ P,PUTERR ;PUTERQ TO PREFIX A "?"
; RETURNS: +1 ALWAYS
PUTERQ: PUSHJ P,TSTCOL ;PUT QM IN COLUMN 1
TMSG <? > ;PREFIX ERROR MESSAGE
PUTERR: MOVX T1,.PRIOU ;GET PRIMARY OUTPUT JFN
HRLOI T2,.FHSLF ;OUR FORK, LAST ERROR CODE
SETZM T3
ERSTR% ;OUTPUT ERROR STRING
NOP ;IGNORE
NOP ;IGNORE
TMSG <
> ;OUTPUT NEW LINE
POPJ P, ;RETURN TO WHENCE WE CAME ...
; SUBROUTINE TO TEST COLUMN POSITION AND OUTPUT CRLF IF NEEDED
TSTCOL: MOVEI T1,.PRIOU ;GET PRIMARY OUTPUT DESIGNATOR
RFPOS% ;READ FILE POSITION
HRRZ T2,T2 ;KEEP JUST THE COLUMN POSITION
JUMPE T2,CPOPJ ;IF AT COLUMN 1 DO NOT OUTPUT CRLF
TMSG <
> ;NO, OUTPUT A CRLF
POPJ P, ;RETURN
;STILL IFN FTFILE & IFN FTDEC20
;PUTATM - ROUTINE TO TYPE THE CONTENTS OF THE ATOM BUFFER
;
;ACCEPTS IN T1/ POINTER TO ASCIZ PREFIX STRING TO BE TYPED
; PUSHJ P,TYPATM
;RETURNS: +1 ALWAYS
TYPATM: PUSH P,T1 ;SAVE POINTER
PUSHJ P,TSTCOL ;ISSUE NEW LINE IF NEEDED
TMSG <? > ;OUTPUT INITIAL PART OF MESSAGE
POP P,T1 ;RESTORE ATOM POINTER
PSOUT% ;OUTPUT THE STRING
TMSG < "> ;OUTPUT PUNCTUATION
HRROI T1,ATMBFR ;GET POINTER TO THE ATOM BUFFER
PSOUT% ;OUTPUT THE TEXT ENTERED
TMSG <"
> ;OUTPUT END OF LINE
POPJ P, ;RETURN
;STILL IFN FTFILE & IFN FTDEC20
;PARSING SUBROUTINES
; ROUTINE TO PARSE AN END-OF-COMMAND
;
; CALL:
; PUSHJ P,ENDCOM
; RETURNS: +1 BAD CONFIRMATION, MESSAGE ALREADY ISSUED
; +2 SUCCESS, COMMAND CONFIRMED
ENDCOM: MOVEI T1,CMDBLK ;GET ADDRESS OF COMMAND STATE BLOCK
MOVEI T2,[FLDDB. (.CMCFM)] ;GET FUNCTION BLOCK FOR CONFIM
COMND% ;PARSE CONFIRMATION
TXNE T1,CM%NOP ;VALID END-OF-COMMAND SEEN ?
PJRST CFMERR ;NO, ISSUE ERRO MESSAGE AND RETURN
JRST CPOPJ1 ;SUCCESS, RETURN
; ROUTINE TO PARSE NOISE PHRASE
;
; CALL: T2/ POINTER TO NOISE PHRASE
; PUSHJ P,SKPNOI
; RETURNS: +1 ERROR, INVALID NOISE PHRASE
; +2 SUCCESS, NOISE PHRASE PARSED OK
SKPNOI: MOVE T1,[NOIFDB,,NOIFDB+1] ;SET UP TO CLEAR FUNCTION DESCRIPTOR BLOCK
SETZM NOIFDB ;CLEAR FIRST WORD OF BLOCK
BLT T1,NOIFDB+FDBSIZ-1 ;CLEAR FUNCTION DESCRIPTOR BLOCK
MOVX T1,.CMNOI ;GET FUNCTION TO PERFORM
STOR T1,CM%FNC,NOIFDB ;STORE FUNCTION CODE IN FDB
MOVEM T2,NOIFDB+.CMDAT ;STORE POINTER TO NOISE PHRASE IN FDB
MOVEI T1,CMDBLK ;GET ADDRESS OF COMMAND STATE BLOCK
MOVEI T2,NOIFDB ;GET ADDRESS OF FUNCTION BLOCK
COMND% ;PARSE NOISE WORD
TXNN T1,CM%NOP ;NOISE PHRASE PARSED OK ?
JRST CPOPJ1 ;YES - RETUR SUCCESS
PUSHJ P,TSTCOL ;ISSUE NEW LINE IF NEEDED
HRROI T1,[ASCIZ/Invalid guide phrase/]
PJRST TYPATM ;OUTPUT THE TEXT ENTERED AND RETURN
;STILL IFN FTFILE & IFN FTDEC20
;CMDINI - ROUTINE TO INITIALIZE COMMAND STATE BLOCK AND OUTPUT PROMPT
;
;ACCEPTS IN T1/ POINTER TO ASCIZ PROMPT STRING
; PUSHJ P,CMDINI
;RETURNS: +1 ALWAYS, WITH THE REPARSE ADDRESS SET TO THE ADDRESS OF THE
; CALL TO CMDINI.
CMDINI: MOVEM T1,CMDBLK+.CMRTY ;SAVE PROMPT STRING IN STATE BLOCK
POP P,SAVRET ;SET UP RETURN ADR FROM CMDINI AND FROM REPARSE
MOVEM P,SAVREP ;SAVE STACK POINTER TO BE RESET ON REPARSE
MOVEI T1,REPARS ;GET ADDRESS OF REPARSE ROUTINE
MOVEM T1,CMDBLK+.CMFLG ;SAVE REPARSE ROUTINE IN STATE BLOCK
MOVEI T1,CMDBLK ;GET ADDRESS OF COMMAND STATE BLOCK
MOVEI T2,[FLDDB. (.CMINI)] ;GET FUNCTION DESCRIPTOR BLOCK
COMND% ;INITIALIZE COMMAND SCANNER JSYS
JRST @SAVRET ;RETURN
; HERE TO PROCESS A REPARSE
REPARS: MOVE P,SAVREP ;RESET STACK POINTER
JRST @SAVRET ;RETURN TO CALLER OF CMDINI
;STILL IFN FTFILE & IFN FTDEC20
; CONSTANTS AND TABLES
DEFINE TB(RTN,TXT)
< [ASCIZ/TXT/] ,, RTN
>
CMDTAB: CMDSIZ,,CMDSIZ ;CURRENT,,MAX SIZE OF COMMAND TABLE
TB (.DRIVE,DRIVE) ;DRIVE (FOR PHYS I/O ON) CHAN UNIT
TB (.ENBLE,ENABLE) ;ENABLE (PATCHING/DATA-FILE)
TB (.EXIT,EXIT) ;EXIT TO MONITOR
TB (.GET,GET) ;GET (FILE) FILE-SPEC
TB (.HELP,HELP) ;OUTPUT HELP MESSAGE
TB (.LOAD,LOAD) ;LOAD (SYMBOLS FROM) FILE-SPEC
TB (.PEEK,PEEK) ;PEEK AT RUNNING MONITOR
TB (.STRUC,STRUCTURE) ;STRUCTURE (FOR PHYS I/O)
CMDSIZ== .-CMDTAB-1 ;DON'T COUNT 1ST WORD
KEYTAB: KEYSIZ,,KEYSIZ
TB (.DATA,DATA-FILE)
TB (.PATCH,PATCHING)
TB (.THAWD,THAWED) ;"ENABLE THAWED"
KEYSIZ== .-KEYTAB-1
SWTTAB: SWTSIZ,,SWTSIZ
TB (.DATA,DATA) ;FILE IS A DATA FILE
TB (.PATCH,PATCH) ;ENABLE PATCHING
TB (.SYMBL,SYMBOL) ;EXTRACT SYMBOLS
TB (.THAWD,THAWED) ;THAWED ACCESS TO FILE
SWTSIZ== .-SWTTAB-1
SWTBLK: FLDDB. (.CMSWI,,SWTTAB,,,CFMBLK) ;BLOCK FOR SWITCHES OR EOL
CFMBLK: FLDDB. (.CMCFM)
;< (MATCH ANGLE BRACKETS)
PROMPT: ASCIZ /FILDDT>/ ;PROMPT STRING
;STILL IFN FTFILE & IFN FTDEC20
HLPMSG: ASCIZ \
GET (FILE) file-spec /switch/switch
Loads a file for DDT to examine it.
Switches:
/DATA Assume the file is raw binary.
/PATCH Allow the file to be modified.
/SYMBOL Load symbols from the file before using.
This is the default action for .EXE files
if DDT does not yet have a symbol table.
/THAWED Obtain thawed access to the file.
LOAD (SYMBOLS FROM) file-spec
Reads the specified file and builds an internal symbol table.
PEEK (AT RUNNING MONITOR)
Examines the running monitor.
STRUCTURE (FOR PHYSICAL I/O IS) disk-structure
Examines the specified disk structure.
DRIVE (FOR PHYSICAL I/O IS ON CHANNEL) c (CONTROLLER) k (UNIT) u
Examines the specified disk unit.
EXIT (FROM FILDDT)
Returns to command level. You then may type a SAVE command
if a LOAD command was just done to pre-load symbols.
HELP
Types this text.
ENABLE PATCHING
Allows modification of whatever is being examined.
ENABLE DATA-FILE
Assumes file is raw binary.
ENABLE THAWED
Obtains thawed access to a file.
DDT features:
n$U sets the page number of the EPT or UPT to be used for
virtual addresses in examining the file.
n$$2U sets the SPT index of a section table or index block.
This is the same as n$U in previous versions of FILDDT.
$U un-does the above commands.
<CTRL/E> closes the currently open file and restarts FILDDT.
\
> ;END OF IFN FTDEC20
;STILL IFN FTFILE
;HERE WHEN FILE SELECTED AND OPENED FOR I/O
FDIOPN: SETOM FILING ;REMEMBER NOT PEEKING
PUSHJ P,FDIAPB ;ALLOCATE BUFFERS FOR FILE'ING
JRST FDIERR ;ERROR--ASK FOR ANOTHER FILE
SKIPE PHYSIO ;SUPER I/O?
JRST FDIPHY ;YES, DIFFERENT FILE INITIALIZATION
SKIPE FDIDSW ;"/D" TYPED
JRST FDIXPD ;YEP - WE KNOW THE FORMAT
;VERIFY FILE IS .EXE FORMAT
SETZ R, ;GET FIRST WORD OF FILE
PUSHJ P,FETCH ; . . .
JRST FDIXPN ;NOT AN EXE FILE IF NO FIRST WORD
HLRZ TT,T ;GET BLOCK TYPE CODE
CAIE TT,.SVDIR ;IS THIS AN EXE FILE?
JRST FDIXPN ;NO
HRRZ W1,T ;GET COUNT OF WORDS IN THIS BLOCK
TRZE W1,1 ;SUBTRACT HEADER WORD
CAILE W1,MEXSIZ*2 ;A REASONABLE EXE FILE?
JRST BADEXE ;WRONG FORMAT
LSH W1,-1 ;CONVERT WORDS TO ENTRIES
;FALL INTO NEXT PAGE
;STILL IFN FTFILE
;NOW TO LOOP OVER THE EXE DIRECTORY TO DETERMINE THE
;LARGEST PROCESS PAGE DESCRIBED. WE WILL THEN USE THIS INFO
;TO ALLOCATE PAGTBL
SETO W, ;LARGEST IS -1 (NONE YET SEEN)
MOVE W2,W1 ;A COPY OF # OF ENTRIES FOR LOOPING
MOVEI R,1 ;START AT 1ST WORD OF 1ST ENTRY
FDIOP2: PUSHJ P,FETCH ;GET START OF NEXT EXE ENTRY
JRST BADEXE ;NOT AN EXE FILE?
TXNE T,SV$HIS ;IF A HISEG,
AOS NUMSEG ;COUNT IT
ADDI R,1 ;SET TO GET 2ND WORD
PUSHJ P,FETCH ;GET 2ND WORD OF THIS EXE ENTRY
JRST BADEXE ;NOT AN EXE FILE?
LDB TT,[POINT 9,T,8];GET REPEAT COUNT
ANDX T,SV$FPN ;REDUCE TO FILE PAGE NUMBER
ADD TT,T ;PUT LARGEST PROC PAGE IN TT
CAMLE TT,W ;TT LARGEST YET SEEN?
MOVE W,TT ;YES, REMEMBER IT
ADDI R,1 ;NEXT ENTRY
SOJG W2,FDIOP2 ;LOOP OVER ENTIRE EXE DIRECTORY
;NOW ALLOCATE PAGTBL
JUMPL W,BADEXE ;PROBLEM IF NO ENTRIES SEEN
ADDI W,1 ;CONVERT TO # PAGES IN RANGE
CAILE W,MEXSIZ ;REASONABLE?
JRST BADEXE ;NO, DON'T TRY TO ALLOCATE IT
MOVEM W,PGTLEN ;YES, SAVE FOR CHKADR
MOVE T,.JBFF ;GET BASE OF NEW PAGTBL
ADDB W,.JBFF ;UPDATE .JBFF & GET END+1
CAMG W,.JBREL ;HAVE ENOUGH MEMORY?
JRST FDIOP4 ;YES, PROCEED
IFN FTDEC10,<
CORE W,> ;NO, TRY TO GET MORE
JRST [ TMSG <? Insufficient memory to read EXE file directory>
JRST FDEERR] ;CAN'T
FDIOP4: HRLI T,(IFIW (TT1)) ;MAKE T INTO AN IFIW TO PAGTBL
MOVEM T,PAGTBL ;SET POINTER FOR ALL TO SEE
SETZM (T) ;CLEAR PAGTBL IN CASE OF ^C START
HRL T,T ;PAGTBL,,PAGTBL
ADDI T,1 ;PAGTBL,,PAGTBL+1
MOVE TT1,PGTLEN ;LENGTH
SOSE TT1 ;LAST WORD: SAME AS FIRST?
BLT T,@PAGTBL ;NO, CLEAR REST OF TABLE
;FALL INTO NEXT PAGE
;STILL IFN FTFILE
;FALL IN FROM ABOVE TO READ THE EXE DIRECTORY AND SETUP
;PAGTBL BASED ON THE EXE ENTRIES.
MOVEI R,1 ;START AT FIRST WORD OF FILE
FDIXL0: PUSHJ P,FETCH ;GET FIRST WORD OF NEXT DIRECTORY ENTRY
JRST BADEXE ;BAD FORMAT
MOVE W2,T ;SAVE IN A PERMANANT PLACE
ADDI R,1 ;POINT TO SECOND WORD OF ENTRY
PUSHJ P,FETCH ;GET IT
JRST BADEXE ;CAN'T
HRRZ TT1,T ;GET PROCESS PAGE NUMBER
CAIL TT1,MEXSIZ ;OUT OF RANGE
JRST BADEXE ;YES--FILE IS BAD
LDB TT,[POINT 9,T,8] ;GET COUNT
FDIXL1: TLNN W2,1777 ;JUNK IN LH
CAML TT1,PGTLEN ;IN TABLE?
JRST BADEXE ;BAD DIRECTORY
MOVEM W2,@PAGTBL ;STORE IN PAGTBL
TXNN W2,SV$HIS ;"HIGH SEGMENT" PAGE?
JRST FDIXL2 ;NO, SKIP
SKIPN JOBHSO ;THIS THE FIRST HISEG PAGE?
HRRZM T,JOBHSO ;YES, THEN START OF HISEG
FDIXL2: ADDI TT1,1 ;INCREMENT POINTERS
TXNE W2,SV$FPN ;DO NOT CHANGE ALLOCATED BUT
; ZERO TO PAGE 1
ADDI W2,1 ; . . .
SOJGE TT,FDIXL1 ;LOOP OVER THIS ENTRY
ADDI R,1 ;STEP TO NEXT ENTRY
SOJG W1,FDIXL0 ;LOOP OVER ENTIRE DIRECTORY
MOVEI TT2,PAGSIZ ;PAGE SIZE
IMULM TT2,JOBHSO ;CALCULATE HISEG START ADDRESS (IF ANY)
;SEE IF ENTRY VECTOR EXISTS
PUSHJ P,FETCH ;GET HEADER OF NEXT SECTION
JRST BADEXE ;BAD FORMAT
HLRZ TT,T ;GET SECTION ID CODE
CAIE TT,.SVVEC ;ENTRY VECTOR SECTION?
JRST FDIXL3 ;NO, SEE IF PDV SECTION
;FALL THROUGH TO READ ENTRY VECTOR
;STILL IFN FTFILE
;FALL IN FROM ABOVE
HRRZ TT,T ;GET LENGTH OF THIS SECTION
CAIGE TT,3 ;LONG ENOUGH TO HAVE AN ADDRESS?
JRST BADEXE ;NO, BAD FORMAT
MOVEM TT,EVADR ;TEMPORARILY SAVE LENGTH
ADDI R,1 ;INCREMENT TO LENGTH WORD
PUSHJ P,FETCH ;GET EV LENGTH
JRST BADEXE ;BAD FORMAT
MOVEM T,EVLEN ;HANG ON TO IT
ADDI R,1 ;INCREMENT TO ADR WORD
PUSHJ P,FETCH ;GRAB IT
JRST BADEXE ;BAD FORMAT
EXCH T,EVADR ;SAVE ADDRESS, GET BLOCK LENGTH
ADDI R,-2(T) ;INCREMENT PAST END OF BLOCK
PUSHJ P,FETCH ;GET NEXT HEADER WORD
JRST BADEXE ;BAD FORMAT
HLRZ TT,T ;GET ID CODE
;READ IN LIST OF PDVS (IF ANY)
FDIXL3: CAIE TT,.SVPDV ;PDV SECTION?
JRST FDIXL9 ;NO, QUIT
HRRZI W,-1(T) ;GET # PDVS
MOVEM W,PDVNUM ;STORE WHERE SYMCHK CAN FIND IT
MOVE T,.JBFF ;GET ADDRESS OF PDV LIST
ADDB W,.JBFF ;MAKE SPACE FOR IT
CAMG W,.JBREL ;ENOUGH ROOM?
JRST FDIXL4 ;YES, GO ON
IFN FTDEC10,<
CORE W,> ;MAKE MORE ROOM?
JRST [ TMSG <? Insufficient memory to read PDV list>
JRST FDEERR] ;NO MORE ROOM
FDIXL4: HRLI T,(IFIW (W2)) ;MAKE A POINTER TO PDV LIST
MOVEM T,PDVTBL ;PUT IT WHERE IT'S NEEDED
MOVN W2,PDVNUM ;GET NEG NUM PDVS
HRLZ W2,W2 ;MAKE AOBJN POINTER
FDIXL5: ADDI R,1 ;POINT R AT NEXT PDVA
PUSHJ P,FETCH ;GRAB ONE
JRST BADEXE ;BAD FORMAT
MOVEM T,@PDVTBL ;STORE IN THE LIST
AOBJN W2,FDIXL5 ;GO FOR ANOTHER
FDIXL9: SETOM EXEFMT ;FLAG TO USE EXE FORMAT MAPPING
SETOM LASTPG ;CHKADR'S DATA NOT VALID FOR EXE MAPPING
JRST FDISET
;FILE IS IN .XPN FORMAT OR IS PURE DATA FORMAT (E.G., FDIDSW .NE. 0)
FDIXPN: TMSG <% Not in .EXE format -- Data file assumed.
>
FDIXPD: SETZM EXEFMT ;FLAG NOT .EXE FILE
JRST FDISET ;GO DO FINAL SYMBOL ET AL SETUP
;STILL IFN FTFILE
;HERE TO INITIALIZE FOR PHYSICAL I/O TO DISK UNITS
IFN FTDEC10,<
FDIPHY: MOVE T,FLPBLK+.FODEV ;GET INPUT DEVICE
MOVEM T,DSKBLK ;SAVE IT IN DSKCHR BLOCK
MOVE TT,[DSKLEN,,DSKBLK] ;DSKCHR POINTER
DSKCHR TT, ;ASK MONITOR ABOUT IT
JRST FDIPH1 ;NOT A DISK!
MOVEM TT,DSKCHA ;SAVE CONTENTS OF AC
LDB T,[POINTR TT,DC.TYP] ;WHAT FLAVOR OF DISK
CAIE T,.DCTPU ;PHYSICAL UNIT (E.G., RPB3:)
CAIN T,.DCTUF ;OR LOGICAL UNIT (E.G., DSKC1:)?
JRST FDIPH2 ;YES, EASY CASE
CAIN T,.DCTFS ;NO, HOW ABOUT A FULL FILE STRUCTURE?
JRST FDIPH4 ;YES, REQUIRES SOME GRUNGE
FDIPH1: TMSG <? Device must be a disk unit or a file structure>
JRST FDEERR ;COMMON ERROR EXIT
;HERE ON A SPECIFIC UNIT
FDIPH2: MOVE TT2,DSKBLK+.DCUSZ ;UNIT SIZE IN BLOCKS
JRST FDIPH6 ;CRUNCH AND SET WORD COUNT
;HERE ON A FILE STRUCTURE
FDIPH4: MOVE S,DSKBLK+.DCSNM ;REMEMBER STRUCTURE NAME
SETZB TT1,TT2 ;INITIALIZE FOR SYSPHY SEARCH
FDIPH5: SYSPHY TT1, ;NEXT PHYSICAL UNIT IN SYSTEM
JRST FDIPH6 ;??? OH WELL, ASSUME ALL DONE
JUMPE TT1,FDIPH6 ;0 IS DONE
MOVEM TT1,DSKBLK ;SET FOR ANOTHER DSKCHR
MOVE TT,[DSKLEN,,DSKBLK] ;POINTER FOR DSKCHR
DSKCHR TT, ;QUERY MONITOR ABOUT THIS UNIT
JRST FDIPH5 ;IT WENT AWAY?
CAMN S,DSKBLK+.DCSNM ;UNIT PART OF INTERESTING STRUCTURE?
ADD TT2,DSKBLK+.DCUSZ ;YES, ACCUMULATE BLOCKS COUNT
JRST FDIPH5 ;LOOP
FDIPH6: LSH TT2,BL2WRD ;MAKE WORD COUNT
MOVEM TT2,MAXSIZ ;SET MAX SIZE ADDRESSABLE
JRST FDISET ;GO SETUP FOR DISK I/O
;STILL IN IFN FTFILE AND FTDEC10
TYPSTR: LDB T,[POINTR (DSKCHA,DC.TYP)] ;GET TYPE FIELD
MOVEI W1,[ASCIZ /structure /]
CAIE T,.DCTFS ;CHECK FOR IT
MOVEI W1,[ASCIZ /unit /]
PUSHJ P,TSTRG ;PRINT TEXT
MOVE W1,FLPBLK+.FODEV ;DEVICE NAME
PJRST TSIXN ;PRINT IT AND RETURN
> ;END OF IFN FTDEC10
;STILL IFN FTFILE
;INITIALIZE FOR PHYSICAL I/O ON TOPS-20
;WE NEED TO CHECK TO MAKE SURE DRIVES ARE THERE, PACKS ARE
;SPINNING, CHECK WRITE-LOCK ETC., AND SETUP MAXSIZ.
IFN FTDEC20,<
FDIPHY: SKIPGE PHYSIO ;DOES USER WANT STRUCTURE OR UNIT?
JRST FDISTR ;STRUCTURE, GO PROCESS
LOAD T,DOP%C2,PHYARG ;GET CHANNEL NUMBER
MOVEM T,MBLK+.MSRCH ;STORE FOR MSTR
LOAD T,DOP%K2,PHYARG ;GET CONTROLLER NUMBER
CAIN T,<.RTJST(-1,DOP%K2)> ;ANY CONTROLLER SPECIFIED?
SETO T, ;NO, SET TO -1
MOVEM T,MBLK+.MSRCT ;STORE CONTROLLER NUMBER
LOAD T,DOP%U2,PHYARG ;GET UNIT NUMBER
MOVEM T,MBLK+.MSRUN ;STORE FOR MSTR
HRROI T,STRBUF ;POINTER TO STRUCTURE NAME BUFFER
MOVEM T,MBLK+.MSRSN ;STORE IN BLOCK
HRROI T,ALIBUF ;POINTER TO ALIAS NAME BUFFER
MOVEM T,MBLK+.MSRSA ;STORE
MOVX T1,<MBLKL,,.MSRUS> ;ASK MSTR TO RETURN UNIT STATUS
MOVEI T2,MBLK ;USING MBLK
MSTR% ;FILL IN MBLK
ERJMP PUTERQ ;FAILED, COMPLAIN TO USER
MOVE T,MBLK+.MSRST ;GET STATUS FLAGS
TXNE T,MS%OFL ;IS UNIT OFF LINE?
PJRST OFLINE ;YES, COMPLAIN
TXNN T,MS%MNT ;IS IT PART OF A MOUNTED STRUCTURE?
JRST FDIPH2 ;NO, CONTINUE
TMSG <[Unit is part of structure > ;YES, TELL USER
HRROI T1,ALIBUF ;DOING THIS AVOIDS SAD ERRORS
PSOUT% ;TYPE STRUCTURE ALIAS
TMSG <:]
> ;CLOSE OFF MESSAGE
FDIPH2: PUSHJ P,CHKUNI ;TELL USER IF OTHER FUNNY STATUS BITS
MOVE T1,MBLK+.MSRSP ;GET NUMBER OF SECTORS PER PAGE
MOVEM T1,PHYSPP ;REMEMBER FOR LATER USE
MOVE T1,MBLK+.MSRSU ;GET SECTORS PER UNIT
IMULI T1,PAGSIZ ;MULTIPLY BY WORDS TO A PAGE
IDIV T1,PHYSPP ;DIVIDE BY SECTORS PER PAGE
MOVEM T1,MAXSIZ ;SET AS MAXIMUM SIZE TO EXAMINE
JRST FDISET ;GO START DDT
;STILL IFN FTFILE & IFN FTDEC20
;HERE IF USER SPECIFIED A STRUCTURE. LOOP OVER ALL UNITS IN THE
;SYSTEM TO COUNT THE TOTAL SPACE AVAILABLE ON THIS STRUCTURE.
FDISTR: HRROI T1,NAMBUF ;STORE STR NAME IN NAMBUF
MOVE T2,PHYARG ;STRUCTURE DESIGNATOR COMND RETURNED
DEVST% ;GET NAME OF STRUCTURE
ERJMP PUTERQ ;COMPLAIN IF FAILURE
SETOM MBLK+.MSRCH ;INIT MBLK TO LOOP OVER ALL UNITS
SETOM MBLK+.MSRCT ; . . .
SETOM MBLK+.MSRUN ; . . .
SETZM MAXSIZ ;WE DON'T HAVE ANY SIZE YET
MOVX W2,.LHALF ;DON'T YET KNOW # UNITS IN STR
FDIST2: HRROI T,STRBUF ;POINTER TO STRUCTURE NAME BUFFER
MOVEM T,MBLK+.MSRSN ;STORE FOR MSTR
HRROI T,ALIBUF ;POINTER TO STRUCTURE ALIAS BUFFER
MOVEM T,MBLK+.MSRSA ;STORE
SETZM ALIBUF ;CLEAR TO AVOID SPURIOUS MATCHES
MOVX T1,<MBLKL,,.MSRNU> ;GET THE NEXT UNIT FUNCTION
MOVEI T2,MBLK ;USING MBLK
MSTR% ;GET INFO ON FIRST OR NEXT UNIT
ERJMP FDIST6 ;CHECK ALL DONE IF ERROR
HRROI T1,NAMBUF ;THE STRUCTURE THAT WE WANT
HRROI T2,ALIBUF ;THE ALIAS OF THIS UNIT
STCMP% ;SEE IF THEY ARE THE SAME
JUMPN T1,FDIST2 ;LOOP BACK FOR NEXT UNIT IF NOT
MOVE T,MBLK+.MSRST ;GET STATUS BITS
TXNE T,MS%OFL ;IS UNIT OFF LINE?
PJRST OFLINE ;YES, COMPLAIN AT USER
PUSHJ P,CHKUNI ;TELL USER ABOUT OTHER STATUS BITS
MOVE T1,MBLK+.MSRSP ;GET SECTORS PER PAGE
MOVEM T1,PHYSPP ;REMEMBER FOR LATER USE
MOVE T1,MBLK+.MSRSU ;GET SECTORS ON THIS UNIT
IMULI T1,PAGSIZ ;MULTIPLY BY WORDS TO A PAGE
IDIV T1,PHYSPP ;DIVIDE BY SECTORS PER PAGE
ADDM T1,MAXSIZ ;THE STRUCTURE IS THAT MUCH BIGGER
FDIST4: SOJGE W2,FDIST2 ;COUNT ANOTHER UNIT AND LOOK FOR MORE
AOJE W2,MISUNI ;TELL USER IF TOO MANY UNITS
HRRZ W2,MBLK+.MSRNS ;FIRST TIME THROUGH, GET NUMBER OF UNITS
JRST FDIST4 ;AND COUNT THE ONE WE JUST FOUND
FDIST6: MOVEI T1,.FHSLF ;WE GOT AN ERROR FROM MSTR. WHAT WAS IT?
GETER% ;ASK THE MONITOR
HRRZ T2,T2 ;ERROR CODE ONLY
CAIE T2,MSTX18 ;RAN OUT OF UNITS?
PJRST PUTERQ ;NO, GO TELL USER ABOUT OUR ERROR
JUMPN W2,MISUNI ;GO COMPLAIN IF DIDN'T FIND ALL UNITS
JRST FDISET ;ALL DONE
;STILL IFN FTFILE & IFN FTDEC20
;SUBROUTINES TO TALK ABOUT UNITS
CHKUNI: MOVE T,MBLK+.MSRST ;GET UNIT STATUS
TXNN T,MS%HBB ;BAD HOME BLOCKS?
JRST CHKUN2 ;NO, CHECK BAT BLOCKS
TMSG <% > ;YES, TYPE PREFIX
PUSHJ P,TYPUNI ;TYPE UNIT NAME
TMSG < has a bad HOME block
> ;TELL USER ABOUT STATUS BIT
MOVE T,MBLK+.MSRST ;RESTORE T FROM TYPUNI
CHKUN2: TXNN T,MS%BBB ;BAT BLOCKS BAD?
JRST CHKUN4 ;NO, PROCEED
TMSG <% > ;YES, ISSUE PREFIX
PUSHJ P,TYPUNI ;TYPE THE UNIT NAME
TMSG < has a bad BAT block
> ;TELL USER
MOVE T,MBLK+.MSRST ;RESTORE T
CHKUN4: TXNE T,MS%WLK ;WRITE LOCKED?
SKIPN PATCHS ;YES, BUT DOES THE USER WANT TO PATCH?
POPJ P, ;NO TO EITHER, DON'T CARE
TMSG <% > ;PREFIX
PUSHJ P,TYPUNI ;TYPE THE UNIT NAME
TMSG < is write locked
> ;TELL USER
POPJ P, ;RETURN
;STILL IFN FTFILE & IFN FTDEC20
OFLINE: TMSG <? > ;OFF LINE UNIT IS FATAL
PUSHJ P,TYPUNI ;TELL UNIT
TMSG < is off line> ;TELL SAD STORY
JRST FDEERR ;ERROR RETURN
TYPSTR: SKIPL PHYSIO ;DRIVE OR STRUCTURE?
JRST TYPST2 ;DRIVE, TELL USER WHICH ONE
TMSG <file structure > ;STRUCTURE, TELL USER
HRROI T1,NAMBUF ;POINT TO STR NAME
PSOUT% ;TELL USER WHICH STR
TMSG <:> ;TERMINATE WITH COLON
POPJ P,
TYPST2: TMSG <unit > ;DRIVE, SAY "UNIT"
JRST TYPUN4 ;JOIN TYPUNI
TYPUNI: SKIPGE PHYSIO ;STRUCTURE OR UNIT?
JRST TYPUN2 ;STRUCTURE, NEED TO TELL WHICH UNIT
TMSG <Unit> ;UNIT, USER KNOWS WHICH ONE
POPJ P, ;RETURN
TYPUN2: TMSG <Unit > ;TELL USER UNIT NUMBER COMING UP
TYPUN4: MOVEI ODF,8 ;RADIX TO USE
MOVE T,MBLK+.MSRUN ;GET UNIT NUMBER
PUSHJ P,TOC ;TYPE UNIT NUMBER IN OCTAL
SKIPGE MBLK+.MSRCT ;ANY CONTROLLER NUMBER?
JRST TYPUN5 ;NO, SKIP ON
TMSG < on controller > ;TELL USER CONTROLLER NUMBER COMING UP
MOVE T,MBLK+.MSRCT ;AND GET IT
PUSHJ P,TOC ;TYPE IN OCTAL
TYPUN5: TMSG < on channel > ;TELL USER CHANNEL NUMBER COMING UP
MOVE T,MBLK+.MSRCH ;GET CHANNEL NUMBER
PJRST TOC ;TYPE IN OCTAL AND RETURN
MISUNI: JUMPL W2,MISUN1 ;BETTER MESSAGE IF NO UNITS FOUND
TMSG <? Missing or extra units in structure> ;COMPLAIN AT USER
JRST FDEERR ;TYPE CRLF AND RETURN
MISUN1: TMSG <? No such file structure> ;DIDN'T FIND IT AT ALL
JRST FDEERR ;TYPE CRLF AN RETURN
> ;END IFN FTDEC20
SUBTTL FILDDT -- SETUP PAGE BUFFERS AND SYMBOLS
;STILL FTFILE
;SETUP PAGE BUFFERS, SYMBOLS (IF APPROPRIATE) AND FETCH THE
;USER ACS (CRSHAC/BUGACS - IF ANY)
FDISET: PUSHJ P,FDINFO ;TYPE USEFUL INFO
SKIPN FILING ;LOOKING AT MONITOR/MEMORY?
JRST FDIGO ;YES, THEN NEVER EXTRACT SYMBOLS
SKIPE EXEFMT ;LOOKING AT A DATA FILE?
JRST FDIEXE ;NO, PROCEED WITH EXE FILE PROCESSING
;HERE ON A DATA FILE. SEE IF USER WANTS SYMBOLS EXTRACTED.
SKIPN SYMGET ;DATA FILE. USER WANT SYMBOL LOADED?
JRST FDIGO ;NO, GO FILDDT THE FILE.
SKIPE FDIFSW ;USER WANT TO LOOK AT THE FILE?
JRST FDISE2 ;YES, JUST WARN HIM
TMSG <? > ;EXTRACT SYMBOL ONLY, FATAL ERROR
JRST FDISE4 ;FINISH MESSAGE
FDISE2: TMSG <% > ;WARN COMMAND ONLY HALF DONE
FDISE4: TMSG <Symbols cannot be extracted from a data file
> ;FINISH WARNING OR ERROR
SKIPE FDIFSW ;WANT TO FILDDT THE FILE ANYWAY?
JRST FDIGO ;YES, GO TO IT.
PUSHJ P,CLSFIL ;NO, CLOSE OFF THE USELESS FILE
JRST DDT ;RESTART COMMAND PROCESSING
;HERE ON AN .EXE FILE
FDIEXE: SKIPE SYMGET ;/S SPECIFIED?
JRST FDISY ;YES, ALWAYS EXTRACT SYMBOLS
SKIPE SYMP+S$ADR ;NO /S. DO WE ALREADY HAVE SYMBOLS
JRST FDIAC ;YES, JUST LOOK FOR ACS THEN
;EXTRACT SYMBOLS FROM .EXE FILE
FDISY: SETZM SYTLOC ;0$5M
PUSHJ P,SYMFIX ;READ IN THE SYMBOLS
JRST FDEERR ;BAD SYMBOL TABLE FORMAT, MSG ALREADY ISSUED
SKIPE FDIFSW ;FILDDT THE FILE (/F)?
JRST FDIAC ;YES, LOOK FOR ACS
SKIPN SYMGET ;JUST /S (NO /F)?
JRST FDIAC ;NO, GO FILDDT THE FILE
PUSHJ P,CLSFIL ;YES, CLOSE THE SYMBOL FILE
JRST DDT ;GO AROUND AND ASK FOR NEW FILE
;STILL IFN FTFILE
;EXTRACT THE ACS FROM THE .EXE FILE
FDIAC:
IFN FTDEC10&FTPAGM,< ;ONLY DO THIS FOR A -10 WITH PAGING
MOVEI R,.JBEDV ;JOBDAT POINTER TO THE EDV
PUSHJ P,FETCHP ;TRY TO READ IT
JRST FDIAC1 ;DO OLD WAY IF CAN'T
JUMPE T,FDIAC1 ;OR IF NOT THERE
MOVE R,T ;COPY THE POINTER
IFN .EDCNT,<ADDI R,.EDCNT> ;POINT TO THE COUNT WORD (0)
PUSHJ P,FETCHP ;FETCH IT
JRST FDIAC1 ;GIVE UP ON IT IF CAN'T
TLC T,'EDV' ;CHECK BITS
TLNN T,-1 ;MUST HAVE 'EDV' IN LH
CAIG T,.EDCAC ;AND BE LONG ENOUGH
JRST FDIAC1 ;NO OR NO, GO BACK TO THE OLD WAY
ADDI R,.EDDAT-.EDCNT ;YES, POINT TO DATA WORD
PUSHJ P,FETCHP ;READ IT
JRST FDIAC1 ;GIVE UP IF CAN'T
SKIPN S,T ;COPY TO A SAFER PLACE
JRST FDIAC1 ;MUST BE NON-ZERO
ADDI R,.EDEPT-.EDDAT ;POINT TO EPT ADDRESS WORD
PUSHJ P,FETCHP ;GET PHYSICAL ADDRESS OF THE EPT
JRST FDIAC1 ;GIVE UP IF CAN'T
MOVE W2,T ;PRESERVE FOR LATER
ADDI R,.EDSPT-.EDEPT ;POINT TO SPT ADDRESS WORD
PUSHJ P,FETCHP ;GET PHYSICAL BASE ADDRESS OF SPT
JRST FDIAC1 ;WORD MUST BE THERE
MOVE W1,T ;COPY FOR LATER
TXNE S,ED.KLP ;IF KL PAGING IN USE,
JUMPE T,FDIAC1 ;DEMAND A REAL SPT
ADDI R,.EDCST-.EDSPT ;POINT TO CST BASE WORD
PUSHJ P,FETCHP ;GET PHYSICAL BASE ADDRESS OF CST
JRST FDIAC1 ;WORD MUST BE THERE
MOVE W,T ;COPY FOR LATER
ADDI R,.EDCAC-.EDCST ;POINT TO CRASH AC POINTERS WORD
PUSHJ P,FETCHP ;GET ADDR OF ADDR OF CRASH ACS
JRST FDIAC1 ;WORD MUST BE THERE
SKIPN R,T ;COPY POINTER
JRST FDIAC1 ;MUST POINT TO CORE
PUSHJ P,FETCHP ;FETCH ADDRESS OF SAVED ACS
JRST FDIAC1 ;WORD MUST BE LEGIT
SKIPN R,T ;SAVE POINTER AWAY
JRST FDIAC1 ;MUST POINT TO CORE
LSH W2,WRD2PG ;CONVERT EPT ADDRESS TO PAGE NUMBER
MOVEM W2,MAPPG ;SAVE AS IF FROM $U
MOVEM W1,SPTWRD ;SIMILARLY FOR SPT BASE
MOVEM W,CSTWRD ;AND FOR CST BASE
MOVE W,S ;COPY .EDDAT WORD
PUSHJ P,SETKZC ;CLEAR OUT CPU TYPE FLAGS
HRRZ T,W ;GET CPU TYPE CODE
CAIL T,.CCKAX ;MUST BE AT LEAST A KA
CAILE T,.CCKSX ;AND NOT BEYOND A KS
CAIA ;NO, DON'T STORE IT
SETOM KAFLG-.CCKAX(T) ;YES, SET CPU TYPE
MOVE T,KLFLG ;IF A KL
IOR T,KSFLG ;OR A KS
MOVEM T,KLSFLG ;LIGHT THE EITHER/OR FLAG
SETZ W1, ;ASSUME KL PAGING
SETO W2, ;NOT KI PAGING
TXNN W,ED.KLP ;VALID ASSUMPTION?
EXCH W1,W2 ;NO, SWAP FLAGS
PUSHJ P,SETKXP ;SET UP PAGING FLAGS
AOS MAPFN ;FINISH UP THE $0U COMMAND
PUSHJ P,FETCHP ;VALIDATE START
JRST FDIAC0 ;NO, GIVE UP
ADDI R,17 ;YES, POINT TO END
PUSHJ P,FETCHP ;VALIDATE THAT
JRST FDIAC0 ;NO, GIVE UP
SUBI R,17 ;YES, BACK UP TO BASE OF BLOCK
PUSHJ P,SETCA1 ;EMULATE $5U COMMAND
TMSG <[Paging and ACs set up from the Exec Data Vector]
> ;TELL WHAT WE JUST DID
SETOM JOBEDV ;REMEMBER THAT WE DID THIS
MOVE T,MAPPG ;GET EPT PAGE NUMBER
MOVEM T,EDVEPT ;SAVE FOR $U
MOVE T,SPTWRD ;AND INCOMING SPT ADDRESS
MOVEM T,EDVSPT ;SAVE FOR $U
MOVE T,CSTWRD ;SIMILARLY FOR CST
MOVEM T,EDVCST ;...
JRST FDIAC4 ;FINISH UP WITH THIS
FDIAC0: SETZM MAPFN ;TURN OFF PAGING AGAIN
FDIAC1:
> ;END IFN FTDEC10&FTPAGM
IFN FTDEC10,<
MOVE T,[RADIX50 0,CRSHAC]>
IFN FTDEC20,<
MOVE T,[RADIX50 0,BUGACS]>
MOVEM T,SYM ;LOOKUP CRSHAC
PUSHJ P,EVAL ; IN SYMBOL TABLE
SETZ T, ;NOT THERE, USE VIRTUAL 0 TO 17
MOVSI W1,-20 ;NUMBER OF ACS
MOVE R,T ;WHERE THE ACS ARE
MOVEM R,FAKEAD ;SET ADDRESS FOR USER TO SEE
FDIGAC: PUSHJ P,FETCH ;GET THE AC
JRST FDIGO ;CAN NOT FETCH
MOVEM T,AC0(W1) ;STORE AC
ADDI R,1 ;POINT TO NEXT CELL
AOBJN W1,FDIGAC ;GET THE ACS
CAIN R,20 ;USING CRSHAC/BUGACS?
JRST FDIAC4 ;NO
IFN FTDEC10,<
TMSG <[ACs copied from CRSHAC to 0-17]
> > ;END IFN FTDEC10
IFN FTDEC20,<
TMSG <[ACs copied from BUGACS to 0-17]
> > ;END IFN FTDEC20
FDIAC4: SETOM FAKEAC ;FLAG USING FAKE LOC 0 - 17
IFN FTDEC10&FTPAGM,< ;ONLY NEED THIS FOR -10
SETZM LLOCS ;BACK TO NORMAL STARTING SECTION
> ;END OF IFN FTDEC10&FTPAGM
IFN FTDEC20,<
MOVE T,[RADIX50 0,SPT]
MOVEM T,SYM
PUSHJ P,EVAL
JRST FDIGO
MOVEM T,SPTWRD
> ;END OF IFN FTDEC20
FDIGO: JRST DD1 ;GO START DDT
;STILL IFN FTFILE
FDINFO: MOVEI W1,[ASCIZ /[Looking at /]
SKIPE SYMGET ;/S SPECIFIED?
MOVEI W1,[ASCIZ /[Extracting symbols from /]
SKIPE FDIFSW ;/F TYPED?
MOVEI W1,[ASCIZ /[Examining /]
SKIPE PATCHS ;PATCHING?
MOVEI W1,[ASCIZ /[Patching /]
PUSHJ P,TSTRG ;PRINT TEXT
SKIPN PHYSIO ;PHYSICAL I/O?
JRST FDINF1 ;NO
PUSHJ P,TYPSTR ;TYPE STRUCTURE OR UNIT
JRST FDINF4 ;END THE LINE AND START DDT
FDINF1: SKIPN FILING ;LOOKING AT A DISK FILE
JRST FDINF2 ;NO
TMSG <file > ;YES, SAY IT'S A FILE
IFN FTDEC10,<
MOVEI TT,FLPBLK ;POINT TO FILOP BLOCK
PUSHJ P,TYPFIL ;PRINT FILESPEC
> ;END IFN FTDEC10
IFN FTDEC20,<
HRROI T1,NAMBUF ;POINT TO THE FILE SPEC
PSOUT% ;TYPE IT
> ;END IFN FTDEC20
JRST FDINF4 ;END LINE
FDINF2:
IFN FTDEC10,<
SKIPN A,JOBING ;/J?
JRST FDINF3 ;NO
TMSG <job > ;LOOKING AT A JOB
PUSHJ P,FP7 ;TYPE IN DECIMAL
JRST FDINF4 ;ALMOST DONE
> ;END IFN FTDEC10
FDINF3: TMSG <the running monitor> ;ONLY POSSIBILITY LEFT
FDINF4: TMSG <]
> ;END THE LINE
POPJ P, ;RETURN
;SOME ERRORS COMMON TO ALL SYSTEMS
NOTDSK: TMSG <? Input device must be a disk>
JRST FDEERR ;CRLF AND RETURN
BADEXE: TMSG <? Bad format for .EXE file>
;HERE TO TYPE A CRLF, CLEAR THE INPUT BUFFER, AND SCAN A NEW COMMAND
FDEERR: TMSG <
> ;TYPE A CRLF
FDIERR: PUSHJ P,TTYCLR ;CLEAR INPUT BUFFER
IFN FTDEC10,<
JRST DDT> ;RESTART DDT ON TOPS-10
IFN FTDEC20,<
POPJ P,> ;GIVE ERROR RETURN TO PARSER ON TOPS-20
;STILL IFN FTFILE
;ALLOCATE FILE PAGE BUFFERS
FDIAPB: SKIPE T,WIND0 ;ALREADY BEEN HERE?
CAML T,.JBFF ;AND DID WE MEAN IT?
SKIPA T,.JBFF ;NO, GET START OF FREE MEMORY
JRST CPOPJ1 ;GIVE GOOD RETURN IF ALREADY DONE
TRNE T,PAGMSK ;PAGE BOUNDARY?
ADDI T,PAGSIZ ;NO, ROUND UP TO
ANDCMI T,PAGMSK ;PAGE BOUNDARY
MOVEM T,WIND0 ;SET AS BASE ADDRESS FOR BUFFERS
ADDI T,WINMAX*PAGSIZ-1 ;AMOUNT OF ROOM NEEDED
CAMG T,.JBREL ;WITHIN ADDRESSABLE MEMORY?
JRST FDIAP4 ;YES, NO NEED TO BOTHER MONITOR
PUSH P,T ;PRESERVE T ACROSS MONITOR CALL
IFN FTDEC10,<
CORE T,> ;ASK MONITOR FOR SOME SPACE
JRST [ TMSG <? Not enough memory for file pages>
POP P,T ;RESTORE STACK
POPJ P,] ;PROPAGATE FAILURE
POP P,T ;GET BACK ADDRESS
FDIAP4: ADDI T,1 ;POINT TO NEW FIRST FREE LOCATION
MOVEM T,.JBFF ;SAVE IT FOR OTHERS TO LOOK AT
JRST CPOPJ1 ;ALL DONE
;STILL IFN FTFILE
SYMFIX:
IFN FTSCSH,<
PUSHJ P,CLRCSH> ;ZERO THE SYMBOL TABLE CACHE
SETZM SYMVAL ;SYMBOLS NOT KNOWN YET
PUSHJ P,SYMCHK ;LOCATE AND VERIFY SYMBOL TABLE POINTERS
MOVE T,[SYMP,,FOSPTR] ;SAVE DEFINED SYMBOL BLOCK
BLT T,FOSPTR+S$SIZ-1 ; FOR CLSFIL
MOVE T,[USYMP,,FOUPTR] ;UNDEFINED BLOCK TOO
BLT T,FOUPTR+S$SIZ-1 ;SAVE FOR CLSFIL
MOVE T,[HSYMP,,FOHPTR] ;AND THE HISEG POINTER
BLT T,FOHPTR+S$SIZ-1 ;CLSFIL NEEDS THEM ALL
MOVE W1,.JBFF ;GET CURRENT FIRST FREE
MOVEM W1,FISBEG ;SAVE FOR DEPSYM
ADDI W1,1000 ;1P FOR PATCHING
MOVE W,SYMP+S$LEN ;COUNT CORE NEEDED
ADD W,USYMP+S$LEN ;FOR ALL TABLES
ADD W,HSYMP+S$LEN ;WHEN SYMBOLS COPIED
MOVE T,W ;COPY SIZE
LSH T,-1 ;CONVERT TO NUMBER OF SYMBOLS
MOVEM T,FISCNT ;SAVE FOR MESSAGE
ADD W,W1 ;BEGINNING+COUNT=END
HRRZM W,.JBFF ;UPDATE MONITOR TO END FOR ITS BUFFER
HRLM W,.JBSA ; ALLOCATION MECHANISMS
HRLM W,.JBCOR ;INDICATE SYMBOLS FOR SAVE
SUBI W,1 ;CONVERT TO LAST LOC NEEDED
MOVEM W,FISEND ;SAVE FOR DEPSYM
CAMG W,.JBREL ;DO WE NEED MORE MEMORY?
JRST SYMFI4 ;NO, WE ALREADY HAVE PLENTY
IFN FTDEC10,<
CORE W,> ;ALLOCATE SOME MORE MEMORY
JRST [ TMSG <? Not enough memory for symbols> ;COMPLAIN TO USER
POPJ P,] ;GIVE ERROR TO CALLER
;NOW TO COPY THE FILE'S SYMBOL TABLES INTO DDT'S ADDRESS SPACE.
SYMFI4: MOVE R,USYMP+S$ADR ;GET USY ADDRESS
MOVEM W1,USYMP+S$ADR ;SAVE FILDDT ADDRESS
SKIPN W2,USYMP+S$LEN ;IS THERE A TABLE TO COPY?
JRST SYMCPY ;NO, SKIP THIS
UCOPY: PUSHJ P,FETCH ;READ ANOTHER SYMBOL WORD
JRST BADSTF ;SYMBOL TABLE MESSED UP
MOVEM T,(W1)
AOS W1
AOS R
SOJG W2,UCOPY
;CONTINUED ON NEXT PAGE
;STILL IFN FTFILE
;CONTINUED FROM PREVIOUS PAGE
SYMCPY: MOVE R,SYMP+S$ADR ;WHEREABOUTS OF MONITOR SYMBOLS
MOVEM W1,SYMP+S$ADR ;NOW POINT TO FILDDT SYMBOLS
SKIPN W2,SYMP+S$LEN ;GET LENGTH
JRST HSYCPY ;IF NO TABLE, GO CHECK HI SEG
TCOPY: PUSHJ P,FETCH ;GET A WORD
JRST BADSTF ;SYMBOL TABLE PTR IS WRONG
MOVEM T,(W1) ;STASH IT
AOS W1
AOS R
SOJG W2,TCOPY
HSYCPY: MOVE R,HSYMP+S$ADR ;FILE'S HISEG SYMBOLS
MOVEM W1,HSYMP+S$ADR ;POINT HSYMP TO FILDDT'S COPY
SKIPN W2,HSYMP+S$LEN ;GET LENGTH
JRST SYMFIN ;DONE IF NONE TO COPY
HCOPY: PUSHJ P,FETCH ;GET NEXT WORD OF SYMBOL TABLE
JRST BADSTF ;ERROR
MOVEM T,(W1) ;STORE IN FILDDT'S AREA
AOS W1 ;BUMP FILDDT'S POINTER
AOS R ;AND FILE'S POINTER
SOJG W2,HCOPY ;LOOP THROUGH ALL SYMBOLS
SYMFIN: SETOM SYMGOT ;FLAG IN-CORE SYMBOLS ARE FROM THIS FILE
SETZM CHGSFL ;AND HAVEN'T BEEN CHANGED YET
TMSG <[> ;START MESSAGE
MOVE A,FISCNT ;GET COUNT OF SYMS LOADED
PUSHJ P,FP7 ;TYPE IN DECIMAL
TMSG < symbols loaded from file]
>
JRST CPOPJ1 ;TELL CALLER WE DID IT
BADSTF: TMSG <? Incorrect symbol table pointer>
POPJ P, ;GIVE ERROR RETURN
> ;END FTFILE
;NOW THE FILDDT ROUTINES
IFN FTFILE,<
CTLZ: PUSHJ P,CLSFIL ;CLOSE OFF THE INPUT FILE
RESET ;CLEAN UP THE WORLD
IFN FTDEC10,<EXIT 1,> ;RETURN TO THE MONITOR
IFN FTDEC20,<HALTF%> ; . . .
JRST DDT ;USER SAID "CONTINUE"
;HERE ON ^E COMMAND. CLOSE THE CURRENTLY-OPEN FILE AND RESTART.
CTLE: PUSHJ P,CLSFIL ;CLOSE OFF THE INPUT FILE
RESET ;MAKE SURE
JRST DDT ;RESTART
;STILL IFN FTFILE
;HERE TO WRITE OUT THE MODIFIED WINDOWS AND CLOSE THE INPUT FILE
CLSFIL: SKIPN FILING ;SEE IF NOT /M
POPJ P, ;NO FILE CLOSE ON /M
SKIPN PATCHS ;/P?
JRST FILREL ;NO, JUST RELEASE THE CHANNEL
PUSHJ P,WRTSYM ;COPY SYMBOLS BACK IF NEEDED
;OPERATING SYSTEM DEPENDENT ROUTINES TO CLOSE OUT THE FILE
IFN FTDEC20,<
SKIPN PHYSIO ;PHYSICAL I/O?
JRST FILREL ;NO, JUST UNMAP THE PAGES
> ;END IFN FTDEC20
SETZM WINNUM ;START WITH WINDOW ZERO
WRTLP: MOVE TT2,WINNUM ;GET WINDOW NUMBER
MOVE T,WINDIR(TT2) ;GET PAGTBL ADDRESS
TXNN T,SV$MOD ;DID THIS PAGE GET MODIFIED?
JRST WRTLP2 ;NO
MOVE TT1,WINFPN(TT2) ;YES, FILE PAGE NUMBER
PUSHJ P,WRTWIN ;WRITE THE WINDOW
JFCL ; SIGH
WRTLP2: AOS TT2,WINNUM ;STEP TO NEXT WINDOW
CAIGE TT2,WINMAX ;MORE?
JRST WRTLP ;YES--KEEP GOING
;ALL WINDOWS WRITTEN OUT, CLOSE OFF THE FILE
IFN FTDEC10,<
FILREL: CLOSE FIL, ;TELL MONITOR WE'RE DONE WITH FILE
STATZ FIL,IO.ERR ;ALL OK?
TMSG <
? OUTPUT error on CLOSE
>
RELEAS FIL, ;GIVE UP CHANNEL
POPJ P, ;AND RETURN
> ;END OF IFN FTDEC10
IFN FTDEC20,<
FILREL: SKIPE PHYSIO ;PHYSICAL I/O?
POPJ P, ;YES, DON'T BOTHER
SETO T1, ;WANT TO "CLOSE" THE FILE
MOVE T2,WIND0 ;BASE ADDRESS OF "BUFFERS"
LSH T2,WRD2PG ;BASE PAGE NUMBER
HRLI T2,.FHSLF ;THIS PROCESS
MOVX T3,PM%CNT!WINMAX;GET ALL INTERNAL "WINDOWS"
PMAP% ;UNMAP ALL POSSIBLE MAPPED FILE PAGES
MOVE T1,FILJFN ;JFN OF OPEN FILE
CLOSF% ;CLOSE OFF THE FILE
JFCL ; ???
POPJ P, ;RETURN
> ;END OF IFN FTDEC20
;STILL IFN FTFILE
;HERE TO COPY CHANGED SYMBOLS AND POINTERS BACK INTO THE FILE
WRTSYM: SKIPN CHGSFL ;SEE IF SYMBOL TABLE CHANGED
POPJ P, ;NO, DON'T COPY ANYTHING
SKIPE PHYSIO ;OR ARE WE DOING PHYSICAL I/O?
POPJ P, ;YES TO EITHER, NO RE-WRITING SYM TAB
;WE KNOW WE WANT TO WRITE THE SYMBOLS BACK, NOW SEE IF SAFE TO DO SO.
;DON'T WANT TO IF THE USER CHANGED A SYMBOL TABLE POINTER, SINCE HE
;PROBABLY KNOWS WHAT'S GOING ON BETTER THAT WE DO.
XMOVEI W,SYMP ;MASTER SYMBOL TABLE POINTER BLOCK
SKIPG SYTLOC ;PDV OR JOBDAT BASIS?
SKIPL S$SUF(W) ;JOBDAT, POINTING TO VECTOR SUBTABLE?
JRST WRTSY2 ;SYMBOL-TABLE-VECTOR-SUBTABLE STYLE
;ORIGINAL SYMBOL TABLE POINTER WERE IOWD-STYLE FROM .JBSYM/.JBUSY
HRL R,SYTLOC ;GET JOBDAT SECTION
HRRI R,.JBSYM ;RE-FETCH FILE'S .JBSYM
PUSHJ P,FETCH ;GET FROM THE FILE
JRST SCPERR ;NOT THERE? CAN'T UPDATE IT THEN
CAME T,FOSPTR+S$OPT ;SAME AS WHEN SYMS WERE COPIED?
JRST SCPERR ;NO, USER DEPOSITED .JBSYM -- ABORT
HRRI R,.JBUSY ;POINT TO FILE'S .JBUSY
PUSHJ P,FETCH ;FROM FILE
JRST SCPERR ;DIDN'T MAKE IT
CAME T,FOUPTR+S$OPT ;STILL THE SAME AS BEFORE?
JRST SCPERR ;NO, ABORT
JRST WRTSY4 ;CHECK HISEG SYMBOL TABLE
;ORIGINAL SYMBOL TABLE POINTERS WERE IN SYMBOL TABLE VECTOR SUBTABLES,
;EITHER ADDRESSED INDIRECTLY BY A PDV OR DIRECTLY BY .JBSYM.
WRTSY2: PUSHJ P,ORGSYM ;CHECK IF ORIGINAL POINTERS THERE
JRST SCPERR ;NOPE, ABORT
XMOVEI W,USYMP ;TRY UNDEFINED BLOCK
PUSHJ P,ORGSYM ;STILL THERE?
JRST SCPERR ;NO, ABORT
;FALL THROUGH TO CHECK HISEG SYMTAB, IF ANY
;NOW CHECK OUT HISEG SYMBOL TABLE, IF ANY
WRTSY4: SKIPN FOHPTR+S$ADR ;WAS THERE A HISEG POINTER?
JRST CLSFI1 ;NO, DON'T CHECK IT
XMOVEI W,HSYMP ;HISEG SYMBOL TABLE POINTER BLOCK
SKIPL S$SUF(W) ;IOWD OR VECTOR SUBTABLE FORMAT?
JRST [PUSHJ P,ORGSYM ;VECTOR SUBTABLE, STILL THERE?
JRST SCPERR ;NOPE, CAN'T UPDATE
JRST WRTSY6] ;YUP, LOOKS GOOD SO FAR
MOVEI R,.JBHSM ;NOW TRY FOR HISEG TABLE
PUSHJ P,HFETCH ;FETCH FROM HISEG
JRST SCPERR ;FAILED?
CAME T,FOHPTR+S$OPT ;CHANGED?
JRST SCPERR ;YES, DON'T COPY ANYTHING
WRTSY6: MOVE T,FOHPTR+S$LEN ;GET ORIG LENGTH
CAME T,HSYMP+S$LEN ;SAME AS FILDDT'S COUNT?
JUMPN T,SCPERR ;MUST AGREE, SINCE NO ROOM FOR PATCHING
;FALL THROUGH TO COPY SYMBOLS BACK
;STILL IFN FTFILE
;FALL THROUGH FROM ABOVE
;IT'S OK TO UPDATE THE FILE'S SYMBOL TABLE. NOW UPDATE THE FILE'S
;COUNT AND ADDRESS, AND THE ORIGINAL POINTERS.
CLSFI1: MOVE T,FOSPTR+S$LEN ;OLD LENGTH
SUB T,SYMP+S$LEN ;GET -DIFFERENCE
ADDM T,FOSPTR+S$ADR ;UPDATE ADDRESS OF FILE'S TABLE
SKIPG SYTLOC ;PDV OR JOBDAT BASIS?
SKIPL SYMP+S$SUF ;JOBDAT, IOWD OR VECTOR SUBTABLE?
JRST CLSFI3 ;SYMBOL TABLE VECTOR SUBTABLES
MOVN T,T ;IOWD, GET POS DIFFERENCE
HRL T,T ;FORM N,,N
EXCH T,SYMP+S$OPT ;GET OPERANDS IN ORDER FOR SUB
SUBB T,SYMP+S$OPT ;BACK .JBSYM INTO PATCH SPACE
MOVN S,USYMP+S$LEN ;GET -LEN NEW UNDEF S.T.
ADD T,S ;GET START OF NEW UNDEF S.T.
HRL T,S ;FORM -N,,ADR
MOVEM T,USYMP+S$OPT ;SAVE FOR LATER UPDATE
JRST CLSFI5 ;BACK TO COMMON CODE
CLSFI3: MOVE T,SYMP+S$LEN ;GET NEW TABLE LENGTH
DPB T,[POINTR SYMP+S$OLN,ST%LEN] ;STORE IT FOR UPDATE
SUB T,FOSPTR+S$LEN ;GET POSITIVE DIFFERENCE
EXCH T,SYMP+S$OPT ;GET OPERANDS IN ORDER FOR SUBTRACT
SUBB T,SYMP+S$OPT ;UPDATE STARTING ADDRESS
MOVE S,USYMP+S$LEN ;GET NEW UNDEF S.T. LENGTH
DPB S,[POINTR USYMP+S$OLN,ST%LEN] ;STORE FOR UPDATE
SUB T,S ;FIND NEW UNDEF S.T. START ADR
MOVEM T,USYMP+S$OPT ;SAVE IT FOR LATER UPDATE
CLSFI5: MOVE T,FOSPTR+S$ADR ;GET FILE'S NEW DEFINED S.T. ADR
SUB T,USYMP+S$LEN ;BACK UP BY NEW UNDEF S.T. LENGTH
MOVEM T,FOUPTR+S$ADR ;STORE FILE'S NEW UNDEF S.T. ADR
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;COPY THE UNDEFINED TABLE INTO THE FILE.
OUCPY: SKIPN W2,USYMP+S$LEN ;ANY UNDEF SYMS LEFT?
JRST OUCPY4 ;NOTHING TO COPY, JUST GO UPDATE POINTER
MOVE R,FOUPTR+S$ADR ;WHERE IN FILE TO PUT THE DATA
MOVE W1,USYMP+S$ADR ;POINTER TO FILDDT'S COPY
OUCPY1: MOVE T,(W1) ;NEXT SYMBOL OR VALUE
PUSHJ P,DEPMEM ;WRITE BACK TO FILE
JRST SCPERR ;GIVE UP COPY IF CAN'T STORE
AOS R ;INCREMENT FILE VIRTUAL ADDRESS
AOS W1 ;INCREMENT INTERNAL-TO-FILDDT ADDRESS
SOJG W2,OUCPY1 ;LOOP FOR REST OF UNDEFINED SYMBOL TABLE
;NOW UPDATE UNDEFINED POINTER(S)
OUCPY4: SKIPG SYTLOC ;JOBDAT OR PDV BASIS?
SKIPL SYMP+S$SUF ;JOBDAT, IOWD OR VECTOR SUBTABLE?
JRST OUCPY6 ;SYMBOL TABLE VECTOR SUBTABLE
MOVEI R,.JBUSY ;WHERE TO STORE IT
HRL R,SYTLOC ;AND IN WHAT SECTION
JRST OUCPY8 ;GO DO IT
OUCPY6: MOVE R,USYMP+S$SUB ;GET SUBTABLE ADDRESS
IFN .STDAT,ADDI R,.STDAT ;POINT TO TYPE/LENGTH WORD
MOVE T,USYMP+S$OLN ;GET NEW DATA
PUSHJ P,DEPMEM ;STORE IT
JRST SCPERR ;FAILURE
ADDI R,.STPTR-.STDAT ;INCREMENT TO ADDRESS WORD
OUCPY8: MOVE T,USYMP+S$OPT ;GET UPDATED POINTER
PUSHJ P,DEPMEM ;DO THE STORE
JRST SCPERR ;FAILED
;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE
;COPY THE DEFINED TABLE INTO THE FILE
OSCPY: SKIPN W2,SYMP+S$LEN ;ANY SYMBOLS?
JRST OSCPY4 ;NOTHING TO COPY, JUST GO UPDATE POINTER
MOVE R,FOSPTR+S$ADR ;WHERE IN FILE TO PUT THE DATA
MOVE W1,SYMP+S$ADR ;POINTER TO FILDDT'S COPY
OSCPY1: MOVE T,(W1) ;NEXT SYMBOL OR VALUE
PUSHJ P,DEPMEM ;WRITE BACK TO FILE
JRST SCPERR ;ERROR
AOS R ;INCREMENT FILE VIRTUAL ADDRESS
AOS W1 ;INCREMENT INTERNAL-TO-FILDDT ADDRESS
SOJG W2,OSCPY1 ;LOOP FOR WHOLE SYMBOL TABLE
;NOW UPDATE THE DEFINED SYMBOL POINTER(S)
OSCPY4: SKIPG SYTLOC ;PDV OR JOBDAT BASIS?
SKIPL SYMP+S$SUF ;JOBDAT, IOWD OR VECTOR SUBTABLE?
JRST OSCPY6 ;SYMBOL TABLE VECTOR SUBTABLE
MOVEI R,.JBSYM ;WHERE TO STORE IT
HRL R,SYTLOC ;AND IN WHAT SECTION
JRST OSCPY8 ;GO DO IT
OSCPY6: MOVE R,SYMP+S$SUB ;GET SUBTABLE ADDRESS
IFN .STDAT,ADDI R,.STDAT ;POINT TO TYPE/LENGTH WORD
MOVE T,SYMP+S$OLN ;GET NEW DATA
PUSHJ P,DEPMEM ;STORE IT
JRST SCPERR ;FAILURE
ADDI R,.STPTR-.STDAT ;INCREMENT TO ADDRESS WORD
OSCPY8: MOVE T,SYMP+S$OPT ;GET UPDATED POINTER
PUSHJ P,DEPMEM ;STORE NEW POINTER
JRST SCPERR ;COMPLAIN IF ERROR
;NOW COPY THE HIGH SEG SYMBOLS. NOTE THAT WE DON'T UPDATE .JBHSM,
;SINCE IT'S AN ERROR ABOVE IF IT CHANGED.
OHCPY: SKIPN R,FOHPTR+S$ADR ;ANY HISEG SYMBOLS?
POPJ P, ;NONE, ALL DONE WITH COPY
MOVE W2,HSYMP+S$LEN ;GET SIZE OF HISEG TABLE
MOVE W1,HSYMP+S$ADR ;POINTER TO FILDDT'S COPY
OHCPY1: MOVE T,(W1) ;GET NEXT DATA WORD
PUSHJ P,DEPMEM ;STORE IN FILE
JRST SCPERR ;ERROR?
AOS R ;BUMP PTR INTO FILE
AOS W1 ;AND PTR INTO FILDDT
SOJG W2,OHCPY1 ;LOOP OVER ALL OF FILDDT'S SYMBOLS
POPJ P, ;DONE UPDATING SYMBOLS
;ORGSYM -- CHECK IF ORIGINAL SYMBOL VECTOR SUBTABLE POINTERS ARE STILL THERE.
;CALL:
; W/ INTERNAL SYMBOL BLOCK ADDRESS
; PUSHJ P,ORGSYM
;RETURNS: +1/ FAILURE
; +2/ SUCCESS, ORIGINAL POINTERS STILL THERE
;
;USES R,T
ORGSYM: MOVE R,S$SUB(W) ;GET SUBTABLE ADDRESS
IFN .STDAT,ADDI R,.STDAT ;POINT TO LENGTH WORD
PUSHJ P,FETCH ;GET FROM FILE
SETCM T,S$OLN(W) ;CAN'T, INSURE FAILS
CAME T,S$OLN(W) ;SAME AS WHEN SYMS WERE COPIED?
POPJ P, ;NO, GIVE ERROR
ADDI R,.STPTR-.STDAT ;NOW FOR ADDRESS WORD
PUSHJ P,FETCH ;FROM FILE
SETCM T,S$OPT(W) ;CAN'T, INSURE FAILURE
CAME T,S$OPT(W) ;STILL THE SAME?
POPJ P, ;NO, ERROR
JRST CPOPJ1 ;ALL UNCHANGED, RETURN GOOD
;HERE IF WE TRIED BUT FAILED TO UPDATE THE FILE'S SYMBOL TABLE.
SCPERR: TMSG <
% Update of file's symbol table failed
>
POPJ P, ;RETURN FROM WRTSYM
> ;END IFN FTFILE FROM PAGES AGO
;NOW FILDDT'S HANDLING
IFN FTFILE,<
;FETCH FROM LOCAL SECTION
FETCHL: SKIPL SYTLOC ;ARE WE LOOKING AT A JOBDAT?
POPJ P, ;NO, RETURN BAD
; PJRST FETCHV ;CONTINUE IN VIRTUAL FETCH
;"VIRTUAL" FETCH
FETCHV: PUSHJ P,SAVR ;SAVE R AS ADVERTISED
FETCH5: JSP TT1,FETFAC ;CHECK REGISTER REFERENCE
FETCH6: SKIPN FILING ;LOOKING AT FILE?
JRST MONPEK ;NO, RUNNING MONITOR/MEMORY
PUSHJ P,CHKADR ;SEE IF WORD ACCESSIBLE
TXNN TT,PG$EXI ;DOES PAGE EXIST?
JRST [ SMERS <PAGE DOES NOT EXIST>
POPJ P,] ;SET ERROR MSG AND RETURN
TXNN TT,PG$REA ;AND CAN WE READ IT?
JRST [ SMERS <NO READ ACCESS>
POPJ P,] ;SET ERROR MSG AND REUTRN
SETZ T, ;IN CASE ABZ
TXNE TT,PG$ABZ ;ALLOCATED BUT ZERO?
JRST CPOPJ1 ;YES, RETURN A 0 WORD
;ACCESSIBLE ADDRESS, SEE IF ALREADY IN MEMORY
PUSHJ P,SRHWIN ;LOOK FOR PAGE ALREADY IN MEMORY
CAIA ;NOT THERE, READ IT IN
JRST FETCH7 ;FOUND IT
;NOT THERE, READ IN SELECTED FILE PAGE NUMBER
PUSHJ P,FREWIN ;FREE UP A WINDOW TO READ INTO
PUSHJ P,REDWIN ;READ INTO MEMORY WINDOW
POPJ P, ;I/O ERROR OR SOMETHING
FETCH7: MOVEI T,PAGMSK ;MASK TO
AND T,R ;GET WORD INDEX INTO PAGE
LSH TT2,PG2WRD ;WORD ADDRESS OF BASE OF WINDOW
ADD T,TT2 ;WORD ADDRESS OF DESIRED WORD
ADD T,WIND0 ;RELOCATE INTO FILDDT MEMORY
MOVE T,(T) ;GET THE DESIRED WORD
IFN FTDEC20,<
ERJMP [ SMERS <ACTUAL REFERENCE FAILED>
POPJ P,] ;CAN'T GET THE DATA
> ;END IFN FTDEC20
JRST CPOPJ1 ;RETURN HAPPILY
;STILL IFN FTFILE
IFN FTDEC10,<
MONPEK: SKIPE JOBING ;JOBPEK'ING?
JRST JOBPEC ;YES
PUSHJ P,CHKADR ;VERIFY ADDRESS
TXNN TT,PG$EXI ;DOES PAGE EXIST?
JRST [ SMERS <PAGE DOES NOT EXIST>
POPJ P,] ;SET ERROR MSG AND RETURN
TXNN TT,PG$REA ;AND CAN WE READ IT?
JRST [ SMERS <NO READ ACCESS>
POPJ P,] ;SET ERROR MSG AND REUTRN
MOVE T,R ;ADDRESS DESIRED IN T
SKIPE MAPFN ;PHYSICAL OR VIRTUAL "PEEK"
JRST PHYPEK ;PHYSICAL
PEEK T, ;VIRTUAL, PEEK AT RUNNING MONITOR
JRST CPOPJ1 ;ASSUME SUCCESS (?)
PHYPEK: CAML T,MAXSIZ ;IS ADDRESS IN PHYSICAL MEMORY?
JRST [ SMERS <ADDRESS BEYOND END OF PHYSICAL MEM>
POPJ P,]
PEEK T,UU.PHY ;EXAMINE PHYSICAL MEMORY SPACE
JRST CPOPJ1 ;ASSUME SUCCESS . . .
JOBPEC: MOVEI TT,TT1 ;ADDRESS OF ARGUMENT LIST
HRLZ TT1,JOBING ;JOB NUMBER WHOSE MEMORY IS TO BE READ
HRRI TT1,1 ;ONLY READ ONE WORD
HRLZ TT2,R ;ADDRESS TO BE READ
HRRI TT2,T ;ADDRESS TO PUT IT IN (OURS)
TLNN R,-1 ;BY THE WAY, ADDRESS WITHIN REASON?
JOBPEK TT, ;ASK MONITOR FOR OTHER JOB'S MEMORY
POPJ P, ;ERROR
JRST CPOPJ1 ;SUCCESS!! HOW ABOUT THAT!
> ;END OF IFN FTDEC10
IFN FTDEC20,<
MONPEK: SKIPE MAPFN ;NEED TO PEEK AT PHYSICAL MEMORY?
JRST [ SMERS <CAN'T PEEK PHYSICAL>
POPJ P,]
PUSHJ P,SAVT4 ;SAVE JSYS ACS
MOVEM R,XPKBLK+.XPMAD ;PUT MONITOR ADDRESS IN ARG BLOCK.
MOVEI T1,XPKBLK ;POINT TO ARG BLOCK.
XPEEK%
ERJMP [MOVE T1,XPKBLK+.XPMAD ;FAILED, MAYBE OLD MONITOR
TLNE T1,-1 ;PEEK% CAN ONLY HANDLE SECTION 0
JRST MONPKE ;CAN'T DO THE PEEK
HRLI T1,1 ;WANT ONE WORD
MOVE T2,XPKBLK+.XPUAD ;PUT IT HERE
PEEK% ;GET THE WORD
ERJMP MONPKE ;STILL CAN'T!
JRST CPOPJ1] ;WORKED THIS TIME
JRST CPOPJ1 ;OK
MONPKE: SMERS <PEEK FAILED> ;GIVE ERROR
POPJ P, ;AND RETURN BAD
> ;END OF IFN FTDEC20
;STILL IFN FTFILE
;SYMBOL FETCHING FOR FILDDT
FETSYM: PUSHJ P,SAVR ;PRESERVE FOR CALLERS
PUSHJ P,R2ADDR ;CONVERT TO AN ADDRESS
CAML R,FISBEG ;BELOW BEGINNING OF SYMS?
CAMLE R,FISEND ;OR BEYOND END?
POPJ P, ;YES, GIVE ERROR ERTURN
MOVE T,(R) ;FETCH VALUE
JRST CPOPJ1 ;RETURN
;REGULAR USER VIRTUAL STORE (PHYSICAL SAME AS VIRTUAL)
STOREV:
STOREP: PUSHJ P,SAVR ;SAVE R AS ADVERTISED
STORE5: JSP TT1,STOFAC ;CHECK AC REFERENCE
SKIPN PATCHS ;PATCHING LEGAL?
JRST DEPNPT ;NO, GIVE AN ERROR
STORE6:
STORE3: SKIPN FILING ;FILE I/O OR RUNNING MONITOR/MEMORY?
JRST MONPOK ;RUNNING MONITOR/MEMORY
PUSHJ P,CHKADR ;CHECK ADDRESS ACCESSIBLE
TXNN TT,PG$ABZ ;CAN NEVER WRITE ABZ PAGES
TXNN TT,PG$WRT ;CAN WE WRITE THE PAGE?
POPJ P, ;NO
TXNE TT,PG$EXI ;DOES THE PAGE EXIST?
JRST STORF8 ;YES, GO READ IT IN
PUSH P,R ;SAVE ORIGINAL R
TRZN R,PAGMSK ;ROUND DOWN TO START OF PAGE
JRST STORF3 ;ALREADY THERE, DON'T BOTHER
PUSHJ P,CHKADR ;SEE IF THIS PAGE EXISTS AT ALL
TXNN TT,PG$WRT ;START OF PAGE WRITEABLE?
JRST [ POP P,R ;NO?? RETURN ERROR
POPJ P,] ; . . .
STORF3: PUSH P,T ;SAVE WORD TO DEPOSIT
TXNE TT,PG$EXI ;DOES START OF PAGE EXIST?
JRST STORF4 ;YES, GO READ IT IN
;FALL THROUGH TO NEXT PAGE
;STILL IFN FTFILE
;FALL IN FROM ABOVE
;HERE WHEN THE PAGE WE'RE DEPOSITING INTO DOESN'T EXIST AT ALL.
;FREE UP A WINDOW PAGE, THEN CALL NEWWIN TO INITIALIZE IT.
PUSHJ P,FREWIN ;FREE UP A WINDOW
POP P,T ;RESTORE CORRECT ACS FOR NEWWIN
POP P,R ; . . .
PUSHJ P,NEWWIN ;SET IT UP TO POINT TO THE FILE PAGE
POPJ P, ;FAILED, PROPAGATE ERROR
JRST STORF9 ;OK, UPDATE EOF AND DO THE STORE
;HERE WHEN THE ADDRESS WE WANT DOESN'T EXIST, BUT AN EARLIER PART OF
;THE SAME PAGE DOES. READ IN THE PART THAT EXISTS, THEN DO THE STORE.
STORF4: PUSHJ P,SRHWIN ;SEE IF ALREADY IN MEMORY
CAIA ;NO, NEED TO READ IT IN
JRST STORF6 ;YES, JUST GO STORE INTO IT
PUSHJ P,FREWIN ;FREE UP A WINDOW
PUSHJ P,REDWIN ;READ OUR FILE PAGE INTO IT
JRST [ POP P,T ;ERROR, POP ACS AND RETURN
POP P,R ; . . .
POPJ P,] ; . . .
;HERE WHEN WE ARE CREATING A NEW FILE PAGE. SEE IF THE END-OF-FILE
;POINTER (IN FILDDT) NEEDS TO BE UPDATED, AND DO SO IF NEEDED.
STORF6: POP P,T ;RESTORE DATA TO BE DEPOSITED
POP P,R ;RESTORE ADDRESS TO DEPOSIT INTO
CAMGE R,MAXSIZ ;BEYOND EOF?
JRST STORF9 ;NO, JUST GO STORE
MOVEM R,MAXSIZ ;YES, UPDATE TO NEW LAST WORD
AOS MAXSIZ ;MAKE NUMBER OF WORDS IN FILE
JRST STORF9 ;NOW GO DO THE STORE
;STILL IFN FTFILE
;HERE WHEN THE WORD WE ARE DEPOSITING INTO ALREADY EXISTS. JUST
;READ IT IN AND DO THE DEPOSIT.
STORF8: PUSHJ P,SRHWIN ;ALREADY IN MEMORY?
CAIA ;NO, NEED TO READ IT IN
JRST STORF9 ;YES, JUST GO DEPOSIT
PUSH P,T ;SAVE DATA TO STORE OVER ???WIN
PUSHJ P,FREWIN ;FREE UP A WINDOW
PUSHJ P,REDWIN ;READ IN OUR PAGE
JRST [ POP P,T ;ERROR, RESTORE AC AND RETURN
POPJ P,] ; . . .
POP P,T ;RESTORE T
;HERE WHEN A WINDOW IS SET UP, WITH T=DATA TO STORE, R=ADDRESS TO
;STORE INTO, TT2=WINDOW CONTAINING THE ADDRESS R.
STORF9: MOVE TT,TT2 ;GET WINDOW NUMBER
LSH TT,PG2WRD ;CONVERT TO OFFSET INTO WINDOW AREA
ADD TT,WIND0 ;MAKE A REAL ADDRESS
MOVEI TT1,PAGMSK ;WORD INDEX INTO PAGE MASK
AND TT1,R ;GET WORD INDEX
ADD TT1,TT ;POINT INTO BUFFER AREA
MOVEM T,(TT1) ;DO THE STORE
IFN FTDEC20,<
ERJMP CPOPJ> ;GIVE ERROR IF CAN'T DO THE STORE
SETOM LASTPG ;STORE COULD HAVE CHANGED PROPERTIES
MOVX TT1,SV$MOD ;THE PAGE MODIFIED BIT
IORM TT1,WINDIR(TT2) ;SET THE MODIFIED BIT
JRST CPOPJ1 ;SUCCESSFUL RETURN
;STILL IFN FTFILE
IFN FTDEC10,<
MONPOK: SKIPE JOBING ;JOBPEK'ING?
JRST JOBPOK ;YES
PUSHJ P,CHKADR ;VERIFY ADDRESS
TXNN TT,PG$WRT ;CAN WE WRITE IT?
POPJ P, ;NO
PUSH P,T ;SAVE ARGUMENT
MOVEM T,POKBLK+2 ;SET AS NEW VALUE
MOVEM R,POKBLK ;SET MONITOR POKE ADDR.
MOVE T,[3,,POKBLK] ;GET POINTER
SKIPE MAPFN ;PHYSICAL OR VIRTUAL POKING?
JRST PHYPOK ;PHYSICAL
POKE. T, ;ORDINARY [MONITOR] VIRTUAL
JRST [ POP P,T ;CLEAN UP STACK ON ERROR
POPJ P,] ;PASS ERROR ON TO CALLER
POP P,T ;RESTORE VALUE
JRST CPOPJ1 ;SKIP RETURN
PHYPOK: POKE. T,UU.PHY ;PHYSICAL POKE OF RUNNING MEMORY
JRST [ POP P,T ;RESTORE T ON ERROR
POPJ P,] ;PASS ERROR ON TO CALLER
POP P,T ;RESTORE STACK
JRST CPOPJ1 ;RETURN SUCCESSFULLY
JOBPOK: MOVEI TT,TT1 ;ADDRESS OF ARG LIST
HRLZ TT1,JOBING ;JOB WHOSE MEMORY IS TO BE WRITTEN
IOR TT1,[1B0+1] ;WRITE ONLY ONE WORD
HRRZ TT2,R ;ADDRESS TO BE WRITTEN (HIS JOB)
HRLI TT2,T ;ADDRESS TO WRITE FROM (OUR JOB)
TLNN R,-1 ;BY THE WAY, ADDRESS WITHIN LIMITS?
JOBPEK TT, ;ASK MONITOR TO WRITE MEMORY
POPJ P, ;ERROR
JRST CPOPJ1 ;SUCCESS
> ;END OF IFN FTDEC10
IFN FTDEC20,< MONPOK==CPOPJ > ;NO POKING ON TOPS-20
DEPNPT: AOSE DEPNCT ;FIRST TIME THROUGH HERE?
POPJ P, ;NO
TMSG <
? Patching is not enabled
>
JRST CPOPJ1
;SYMBOL STORING FOR FILDDT
DEPSYM: PUSHJ P,SAVR ;PRESERVE FOR CALLERS
PUSHJ P,R2ADDR ;CONVERT TO AN ADDRESS
CAML R,FISBEG ;BELOW BEGINNING OF SYMS?
CAMLE R,FISEND ;OR BEYOND END?
POPJ P, ;YES, GIVE ERROR ERTURN
CAME T,(R) ;SEE IF DIFFERENT
SETOM CHGSFL ;YES--FLAG THAT SYMBOLS CHANGED
MOVEM T,(R) ;STORE NEW VALUE
JRST CPOPJ1 ;RETURN
;STILL IFN FTFILE
SUBTTL MEMORY MANAGEMENT ROUTINES -- FILDDT I/O
;REDWIN -- READ FILE PAGE INTO FILDDT MEMORY WINDOW
;WRTWIN -- WRITE FILE PAGE FROM FILDDT MEMORY WINDOW
;CALL IS:
;
; MOVX TT1,<FPN>
; MOVX TT2,<WIN>
; PUSHJ P,REDWIN/WRTWIN
; ERROR
; NORMAL RETURN
;
;WHERE <FPN> IS THE DESIRED FILE PAGE NUMBER AND <WIN> IS THE
;FILDDT MEMORY WINDOW NUMBER.
;
;ON ERROR RETURN THE DESIRED I/O CANNOT BE PERFORMED.
;
;ON NORMAL RETURN THE WINDOW NAMED BY TT2 WILL HAVE BEEN READ/WRITTEN
;AS APPROPRIATE TO/FROM THE FILE PAGE NUMBER OF TT1, WINFPN HAS BEEN
;SET TO THE APPROPRIATE FILE PAGE NUMBER, AND SV$MOD HAS BEEN CLEARED.
;
;DESTROYS ACS T AND TT.
REDWIN: TDZA T,T ;FLAG READING
WRTWIN: SETO T, ;FLAG WRITING
MOVEM TT1,WINTT1 ;SAVE TT1 AS ADVERTISED
MOVEM TT2,WINTT2 ;SAVE TT2 . . .
IFN FTDEC10,< ;FIRST, TOPS-10 STYLE
MOVE TT2,TT1 ;REALLY WANT PAGE NUMBER IN TT2
LSH TT2,PG2BLK ;AND REALLY WANT DISK BLOCK NUMBER
SKIPE PHYSIO ;SUPER I/O TO DISK?
JRST FILIO4 ;YES, GO DO SUSET RATHER THAN FILOP.
AOJ TT2, ;"RELOCATE" PAST BLOCK 0 (FIRST RIB)
MOVE TT,[2,,TT1] ;FILOP. POINTER
MOVSI TT1,FIL ;I/O CHANNEL NUMBER
JUMPN T,FILIO2 ;IF WRITE, GO DO "USETO"
HRRI TT1,.FOUSI ;"USETI" FUNCTION
FILOP. TT, ;POINT I/O TO DESIRED BLOCK NUMBER
JRST FILIOE ;FAILED
JRST FILIO6 ;GO DO I/O
FILIO2: HRRI TT1,.FOUSO ;"USETO" FUNCTION
FILOP. TT, ;POINT I/O TO DESIRED BLOCK
JRST FILIOE ;FAILED
JRST FILIO6 ;GO DO I/O
;STILL IFN FTFILE & IFN FTDEC10
;HERE TO SET FOR SUPER I/O (PHYSICAL I/O TO UNIT/STRUCTURE)
FILIO4: TXO TT2,<Z FIL,> ;SLIP IN CHANNEL NUMBER
SKIPE T ;READ OR WRITE
TXO TT2,SU.SOT ;WRITE
SUSET. TT2, ;SELECT BLOCK NUMBER
JRST FILIOE ;FAILED
TXZ TT2,<<Z FIL,>!SU.SOT> ;FALL INTO I/O
;HERE TO DO ACTUAL I/O ONCE BLOCK IS SELECTED
FILIO6: MOVE TT1,WINTT2 ;WINDOW NUMBER
LSH TT1,PG2WRD ;CONVERT TO WORD ADDRESS (INDEX)
ADD TT1,WIND0 ;RELOCATE INTO FILDDT BUFFER AREA
HRLI TT1,-PAGSIZ ;CONCOCT AN IOWD POINTER
SKIPE EXEFMT ;AN EXE FILE?
JRST FILIO7 ;YES, MAXSIZ IS IRRELEVANT
MOVE TT2,WINTT1 ;GET FILE PAGE
LSH TT2,PG2WRD ;MAKE IT AN ADDRESS
IORI TT2,PAGMSK ;ROUND TO BOTTOM OF PAGE
CAMGE TT2,MAXSIZ ;PAST EOF?
JRST FILIO7 ;NO, NOTHING TO WORRY ABOUT
AND TT2,MAXSIZ ;YES, GET LOW ORDER ADDRESS BITS
ANDI TT2,PAGMSK ;AND ONLY LOW ORDER BITS
MOVNI TT2,(TT2) ;NEGATE (FOR IOWD COUNT)
HRL TT1,TT2 ;AND ADJUST I/O COMMAND LIST
FILIO7: SOJ TT1, ;RH(IOWD) IS ADDRESS MINUS ONE
SETZ TT2, ;END OF I/O LIST
JUMPN T,FILIO8 ;READ OR WRITE
IN FIL,TT1 ;READ
JRST FILIOS ;SUCCESS
JRST FILIO9 ;FAILURE
FILIO8: OUT FIL,TT1 ;WRITE
JRST FILIOS ;SUCCESS
FILIO9: SETSTS FIL,.IODMP ;CLEAR ERROR BITS
TMSG <
? I/O error
> ;WARN USER
JRST FILIOS ;LET USER SEE WHATEVER WE GOT
> ;END OF IFN FTDEC10
;STILL IFN FTFILE
IFN FTDEC20,< ;TOPS-20 STYLE
SKIPE PHYSIO ;SUPER I/O?
JRST FILIO4 ;YES, SPECIAL CODE
JUMPN T,FILIOS ;MONITOR WILL RE-WRITE AUTOMATICALLY
PUSHJ P,SAVT4 ;PRESERVE SOME ACS
MOVE T1,TT1 ;FILE PAGE NUMBER
HRL T1,FILJFN ;JFN OF FILE
MOVE T2,TT2 ;GET WINDOW NUMBER
LSH T2,PG2WRD ;MAKE WORD ADDRESS
ADD T2,WIND0 ;RELOCATE INTO BUFFER AREA
LSH T2,WRD2PG ;BACK TO PAGE NUMBER
HRLI T2,.FHSLF ;THIS PROCESS
MOVX T3,PM%RD ;WE WANT TO READ
SKIPE PATCHS ;PATCHING ENABLED?
TXO T3,PM%WR ;YES, SAY WE WANT TO WRITE ALSO
PMAP% ;GET THE FILE PAGE
ERJMP FILIOE ;CAN'T
RPACS% ;NOW FIND FILE'S PAGE ACCESS
MOVEM T2,WINFAC(TT2) ;HANG ONTO IT FOR CHKADR
JRST FILIOS ;PAGE IS MAPPED
;STILL IFN FTFILE & IFN FTDEC20
;HERE FOR SUPER I/O TO DISK UNIT/STRUCTURE
FILIO4: PUSHJ P,SAVT4 ;SAVE ACS FOR REST OF FILDDT
SKIPL T1,PHYSIO ;WANT PHYSICAL UNIT OR STRUCTURE?
SKIPA TT,[POINTR T1,DOP%UA] ;PHYS UNIT, ADDR GOES IN DOP%UA
MOVE TT,[POINTR T1,DOP%RA] ;STRUCTURE, ADDR GOES IN DOP%RA
MOVE TT2,TT1 ;COPY PAGE NUMBER
IMUL TT2,PHYSPP ;CONVERT PAGE NUMBER TO SECTOR NUMBER
DPB TT2,TT ;PUT SECTOR NUMBER IN RIGHT FIELD IN T1
LDB TT,TT ;GET SECTOR NUMBER BACK FROM T1
CAME TT,TT2 ;DID WHOLE THING GET STORED?
JRST FILTRF ;BLOCK # TOO BIG! DON'T WRAP AROUND
LSH TT1,PG2WRD ;CONVERT ADDRESS TO WORDS
MOVX T2,PAGSIZ ;ASSUME WE'LL READ A PAGE
IORI TT1,PAGMSK ;ROUND WORD ADDR UP TO END OF PAGE
CAMGE TT1,MAXSIZ ;WOULD READING A PAGE BE TOO MUCH?
JRST FILIO5 ;NO, PROCEED
MOVE T2,MAXSIZ ;YES, WE'LL ONLY READ LAST PARTIAL PAGE
ANDI T2,PAGMSK ;CLEAR EXTRANEOUS BITS
FILIO5: DPB T,[POINTR T2,DOP%WR] ;SET READ OR WRITE FLAG
SKIPL PHYSIO ;PHYSICAL UNIT WANTED?
TXO T2,DOP%NF ;YES, SET NEW FORMAT USED
MOVE T3,WINTT2 ;GET INTERNAL PAGE NUMBER
LSH T3,PG2WRD ;CONVERT TO WORDS
ADD T3,WIND0 ;ADD BUFFER BASE ADDRESS
MOVE T4,PHYARG ;GET STRUCTURE DESIGNATOR OR CKU NUMBERS
MOVE TT1,T1 ;SAVE ARGUMENT IN CASE OF FAILURE
DSKOP% ;DO THE I/O
ERJMP FILTRO ;FAILED, GO TRY OLD METHOD
JUMPE T1,FILIOS ;IF NO I/O ERROR, GIVE SUCCESS RETURN
FILTRO: TXC T4,DOP%K2 ;COMPLEMENT CONTROLLER NUMBER
TXCN T4,DOP%K2 ;FIX BACK AND CHECK IF CONTROLLER WAS GIVEN
SKIPGE PHYSIO ;OR IF DOING STRUCTURES
JRST FILTRF ;YES, CAN'T TRY OLD FORMAT
MOVE T1,TT1 ;RESTORE ORIGINAL ARGUMENT
LOAD TT1,DOP%C2,T4 ;GET CHANNEL NUMBER FROM NEW FORMAT
LOAD TT2,DOP%U2,T4 ;AND UNIT NUMBER
CAIG TT1,<.RTJST(-1,DOP%CN)> ;CHANNEL TOO LARGE FOR OLD FORMAT?
CAILE TT2,<.RTJST(-1,DOP%UN)> ;OR UNIT TOO LARGE?
JRST FILTRF ;YES, HAVE TO GIVE UP
STOR TT1,DOP%CN,T1 ;STORE OLD FORMAT CHANNEL NUMBER
STOR TT2,DOP%UN,T1 ;AND UNIT NUMBER
TXZ T2,DOP%NF ;CLEAR NEW FORMAT FLAG
DSKOP% ;TRY THE OLD STYLE DSKOP NOW
ERJMP FILTRF ;FAILED
JUMPE T1,FILIOS ;IF READ OK, GIVE SUCCESS RETURN
FILTRF: TMSG <
? I/O error
> ;TELL THE USER WHAT'S UP
JRST FILIOE ;AND GO COMPLAIN
> ;END OF IFN FTDEC20
;HERE TO STORE THE FPN INTO WINFPN, CLEAR SV$MOD, AND
;GIVE A SKIP RETURN FROM REDWIN/WRTWIN.
FILIOS: MOVE TT1,WINTT1 ;RESTORE TT1 AS ADVERTISED
MOVE TT2,WINTT2 ;RESTORE TT2
MOVEM TT1,WINFPN(TT2) ;UPDATE WINFPN
MOVX T,SV$MOD ;GET MODIFIED BIT
ANDCAM T,WINDIR(TT2) ;CLEAR
JRST CPOPJ1 ;GIVE GOOD RETURN.
;HERE TO GIVE AN ERROR RETURN FROM REDWIN/WRTWIN.
FILIOE: MOVE TT1,WINTT1 ;RESTORE TT1
MOVE TT2,WINTT2 ;RESTORE TT2
POPJ P, ;GIVE ERROR RETURN
;STILL IFN FTFILE
;SRHWIN -- ROUTINE TO SEARCH INTERNAL WINDOWS FOR THE FILE
; PAGE IN TT1.
;CALL:
; MOVE TT1,<FILE PAGE>
; PUSHJ P,SRHWIN
; NOT FOUND
; FOUND
;
;ON A NORMAL RETURN, THE FILE PAGE NUMBER IS RETURNED IN TT2.
;USES NO OTHER ACS.
SRHWIN: MOVEI TT2,WINMAX-1 ;COUNT OF WINDOWS
CAME TT1,WINFPN(TT2) ;PAGE IN THIS WINDOW?
SOJGE TT2,.-1 ;NO, TRY NEXT WINDOW
MOVEM TT2,WINTT2 ;SAVE WINDOW NUMBER FOR OTHERS
JUMPGE TT2,CPOPJ1 ;JUMP IF WINDOW ALREADY HAS FILE PAGE
POPJ P, ;NOT FOUND
;FREWIN -- ROUTINE TO FREE UP AN INTERNAL WINDOW
;CALL:
; PUSHJ P,FREWIN
; RETURN
;
;ON RETURN, TT2 CONTAINS THE WINDOW NUMBER OF A FREE WINDOW.
;
;DESTROYS ACS T AND TT.
FREWIN: AOS TT2,WINNUM ;NEXT (ROUND ROBIN) WINDOW TO GO
CAIL TT2,WINMAX ;GONE OFF END (MODULO WINMAX)?
SETZB TT2,WINNUM ;YES, LOOP BACK TO 0
MOVX TT,SV$MOD ;THE MODIFIED BIT
TDNN TT,WINDIR(TT2) ;THIS PAGE BEEN MODIFIED?
POPJ P, ;NO, THEN DON'T HAVE TO RE-WRITE IT
PUSH P,TT1 ;SAVE TT1 AS ADVERTISED
MOVE TT1,WINFPN(TT2) ;OLD (MODIFIED) FILE PAGE NUMBER
PUSHJ P,WRTWIN ;WRITE OUT MODIFIED PAGE
JFCL ;INTERNAL ERROR
POP P,TT1 ;RESTORE TT1
POPJ P, ;RETURN TO CALLER
;STILL IFN FTFILE
;NEWWIN -- ROUTINE TO INITIALIZE A WINDOW TO POINT TO A NEW
; (CURRENTLY NON-EXISTENT) FILE PAGE.
;CALL:
; MOVX TT1,<FILE PAGE>
; MOVX TT2,<WINDOW NUMBER>
; MOVX R,<FILE ADDRESS>
; PUSHJ P,NEWWIN
; ERROR (I/O)
; NORMAL RETURN
;
;DESTROYS AC TT.
NEWWIN: PUSHJ P,SAVRST ;SAVE T, AND R & S FOR TOPS-20
MOVE T,TT2 ;WINDOW NUMBER
LSH T,PG2WRD ;OFFSET WITHIN WINDOW AREA
ADD T,WIND0 ;ABSOLUTE MEMORY ADDRESS
MOVE S,MAXSIZ ;SAVE OLD MAXSIZ IN CASE OF ERROR
CAMGE R,MAXSIZ ;LARGEST ADDRESS YET WRITTEN?
JRST NEWWI2 ;NO, NEVER DECREASE MAXSIZ
MOVEM R,MAXSIZ ;UPDATE MAXSIZ
AOS MAXSIZ ;WE WANT # WORDS, NOT LAST USED
NEWWI2:
IFN FTDEC10,< ;ON TOPS-10, ZERO THE PAGE & WRITE IT
SETZM (T) ;CLEAR THE FILE PAGE
HRLZ TT,T ; . . .
HRRI TT,1(T) ; . . .
BLT TT,PAGSIZ-1(T) ; . . .
PUSHJ P,WRTWIN ;EXTEND THE FILE TO THE NEW SIZE
JRST [ MOVEM S,MAXSIZ ;ERROR, FILE DIDN'T GROW AFTER ALL
POPJ P,] ;PROPAGATE ERROR
> ;END IFN FTDEC10
IFN FTDEC20,<
MOVE T1,TT1 ;SOURCE IS FILE PAGE #
HRL T1,FILJFN ;FROM THE CURRENTLY OPEN FILE
MOVE T2,T ;DESTINATION IS ADDRESS IN T
LSH T2,WRD2PG ;PMAP% WANTS A PAGE NUMBER
HRLI T2,.FHSLF ;THIS FORK
MOVX T3,PM%RD!PM%WR ;ONLY GET HERE IF WRITING
PMAP% ;SET UP THE MAPPING (SHOULD NEVER FAIL)
RPACS% ;GET FILE'S PAGE ACCESS
MOVEM T2,WINFAC(TT2) ;SAVE FOR CHKADR
> ;END IFN FTDEC20
MOVEM TT1,WINFPN(TT2) ;SET UP WINFPN
MOVX TT,SV$MOD ;CLEAR SV$MOD
ANDCAM TT,WINDIR(TT2) ;SINCE PAGE HASN'T YET BEEN MODIFIED
JRST CPOPJ1 ;GIVE OK RETURN TO CALLER
;STILL IFN FTFILE
;FILDDT CHKADR
;FOR FILDDT, CHKADR RETURNS THE FILE PAGE NUMBER THAT
;SHOULD BE READ IN TT1. THIS IS EITHER R SHIFTED RIGHT BY 9,
;OR, IF EXEFMT, THE APPROPRIATE FILE PAGE FROM THE EXE DIRECTORY.
IFN FTDEC10,< ;TOPS-10 STYLE
CHKADR: MOVE TT1,R ;FILE WORD NUMBER
LSH TT1,WRD2PG ;FILE PAGE NUMBER
SETZ TT, ;INITIALLY NO ACCESS
SKIPE EXEFMT ;EXE OR DATA?
JRST CHKAEX ;EXE FORMAT
SKIPN FILING ;READING A FILE?
JRST CHKAD2 ;NO, GO RANGE CHECK MONITOR ADDRESS
CAMGE R,MAXSIZ ;IS ADDRESS BEFORE EOF?
TXO TT,PG$EXI!PG$REA!PG$SXI ;YES, SET EXISTS AND READABLE
JRST CHKAE8 ;GO CHECK PATCHS TO SET PG$WRT
;MONITOR OR PHYSICAL MEMORY
CHKAD2: SKIPE MAPFN ;GOING TO DO A PHYSICAL PEEK/POKE?
CAMGE R,MAXSIZ ;YES, WITHIN PHYSICAL MEMORY?
TXOA TT,PG$EXI!PG$REA!PG$SXI ;OK TO TRY FOR IT
POPJ P, ;OFF END OF MEMORY, GIVE ERR
JRST CHKAE8 ;GO CHECK WRITE ACCESS
;EXE FORMAT FILE
CHKAEX: CAMGE TT1,PGTLEN ;PAGE WITHIN REASON?
SKIPN TT1,@PAGTBL ;AND DOES IT EXIST?
POPJ P, ;NO TO ONE OF THE ABOVE
TXO TT,PG$EXI!PG$REA!PG$SXI ;YES,
ANDX TT1,SV$FPN ;PHYSICAL FILE PAGE NUMBER
JUMPN TT1,CHKAE8 ;IF REAL PAGE SEE IF CAN WRITE
TXO TT,PG$ABZ ;ALLOCATED BUT ZERO PAGE
POPJ P, ;RETURN ACCESS BITS
CHKAE8: SKIPE PATCHS ;PATCHING ENABLED?
TXO TT,PG$WRT ;YES, THEN CAN ALSO WRITE
POPJ P, ;RETURN ACCESS BITS
> ;END OF IFN FTDEC10
;STILL IFN FTFILE
IFN FTDEC20,< ;TOPS-20 STYLE
CHKADR: SETZ TT, ;INITIALLY NO ACCESS
MOVE TT1,R ;FILE WORD NUMBER
LSH TT1,WRD2PG ;FILE PAGE NUMBER
XOR TT1,LASTPG ;SEE IF WE ALREADY KNOW THE ACCESS
JUMPE TT1,CHKAD7 ;YES, GO FETCH IT
XORB TT1,LASTPG ;NO, SET LASTPG FOR NEXT TIME
JUMPL R,CHKAD8 ;FORGET NEGATIVE ADDRESSES
SKIPE EXEFMT ;EXE FILE?
JRST CHKAD1 ;DON'T CHECK MAXSIZ
CAML R,MAXSIZ ;BEFORE END OF DISK OR FILE?
JRST CHKAD8 ;NO
SKIPN FILING ;LOOKING AT A FILE?
JRST [ MOVX TT,PG$EXI!PG$SXI!PG$REA ;NO, MONITOR
JRST CHKAD8] ;PEEK CAN ONLY READ
SKIPN PHYSIO ;PHYSICAL I/O?
JRST CHKAD1 ;NO, CHECK /D OR EXE FORMAT
MOVX TT,PG$EXI!PG$SXI!PG$REA ;YES, EXISTS AND IS READABLE
JRST CHKAD5 ;GO CHECK PATCHS FOR WRITE ACCESS
CHKAD1: SKIPN EXEFMT ;EXE OR DATA FORMAT?
JRST CHKAD2 ;DATA, NO MAPPING NEEDED
CAMGE TT1,PGTLEN ;EXE, PAGE # WITHIN REASON?
SKIPN TT1,@PAGTBL ;AND DOES PAGE EXIST?
JRST CHKAD8 ;NO TO ONE OF THE ABOVE
ANDX TT1,SV$FPN ;REDUCE TO PHYSICAL FILE PAGE NUMBER
JUMPN TT1,CHKAD2 ;AND CHECK ACCESS
MOVX TT,PG$EXI!PG$SXI!PG$REA!PG$ABZ ;ALLOCATED BUT ZERO
JRST CHKAD5 ;GO SEE IF WE CAN WRITE
CHKAD2: PUSHJ P,SRHWIN ;SEE IF THIS PAGE IS MAPPED IN
JRST CHKAD3 ;ISN'T, DO IT THE HARD WAY
MOVE TT,WINFAC(TT2) ;IS, ALREADY KNOW MONITOR'S ACCESS
JRST CHKAD5 ;SEE WHAT IT REALLY SHOULD BE
CHKAD3: PUSHJ P,SAVR ;SAVE R OVER RPACS%
MOVE T1,TT1 ;FILE PAGE NUMBER
HRL T1,FILJFN ;JFN FOR FILE
RPACS% ;GET ACCESS BITS
ERJMP [ SETZ T2,
JRST .+1] ;CAN'T ACCESS PAGE IF SECTION NOT THERE
MOVE TT,T2 ;PUT ACCESS IN RIGHT PLACE
;HERE WITH MONITOR'S ACCESS IN TT. MODIFY WRITE ACCORDING TO PATCHS.
CHKAD5: SKIPE PATCHS ;PATCHING?
TXOA TT,PG$WRT ;YES, ALLOW WRITES
TXZ TT,PG$WRT ;NO, DON'T ALLOW THEM
CHKAD8: MOVEM TT,LASTAC ;SAVE FOR NEXT CALL
MOVEM TT1,LSTNPG ;SAVE TRANSLATED PAGE NUMBER
POPJ P, ;RETURN
CHKAD7: MOVE TT,LASTAC ;RETURN PAGE ACCESS BITS
MOVE TT1,LSTNPG ;AND PAGE NUMBER
POPJ P, ;RETURN WITH BITS IN TT
> ;END OF IFN FTDEC20
> ;END OF IFN FTFILE
SUBTTL STORAGE -- MISCELLANEOUS
DDS(BEG.V,0) ;BEGINNING OF VARIABLES
DD(NM1A,1,<<MOVEI W2,0>>)
DD(ACCCF,1) ;"-1,,A" IF "A,,B" CONSTRUCTION
DD(SEAXCT,1) ;XCT'ED BY SEAR2 IN [NOT]WORD SEARCH
DD(TOCS,1,<<MOVEI T,.-.>>);GET RIGHT HALF BACK
DD(MEMERS,1) ;ADR OF ERROR MESSAGE STRING
;WATCH COMMAND ($V) STORAGE
DD(WTCHA,1) ;ADDRESS BEING WATCHED
DD(WTCHC,1) ;COUNTER FOR WATCH CYCLES TILL NEXT LISTEN
DD(WTCHW,1) ;LAST WORD VALUE WATCHED
;VARIABLES FOR LINE BUFFER INPUT
DD(TTYMSK,1) ;FANCY TTY HANDLING MASK
DD(TTDEV,1) ;$Y'ED TERMINAL (IF ANY)
IFN FTEXEC,<
DD(TTSUP,1) ;EXEC-MODE ^O SUPPRESSION FLAG
DD(TTHLD,1) ;EXEC-MODE ^S/^Q HOLD OUTPUT FLAG
> ;END IFN FTEXEC
DD(CHINC,1) ;COUNT OF CHARACTERS
DD(WAKALL,1) ;NON-0 TO WAKEUP ON EVERYTHING
DD(ONES4,4,<-1,-1,-1,-1>);WAKEUP MASK
;*** DO NOT REORDER THE FOLLOWING ***
DD(TEXTIB,1,<10>) ;TEXTI ARG BLOCK - SIZE
IFN FTDEC20,<
DD(,1,<RD%BRK+RD%TOP+RD%PUN+RD%RND+RD%JFN+RD%BBG+RD%SUI>) ;FLAGS
DD(,1,<<.PRIIN,,.PRIOU>>) ;INPUT/OUTPUT JFNS
> ;END IFN FTDEC20
DD(CHINP,1) ;POINTER TO NEXT CHAR
DD(LINSPC,1) ;FREE SPACE COUNT
DD(LINDB,1,<<POINT 7,LINBF>>);BEGINNING OF BUFFER
DD(LINBP,1,<<POINT 7,LINBF>>);BEGINNING OF ^R BUFFER
DD(ETXTB,1) ;WAKEUP TABLE (ALL ONES)
DD(,1) ;BACKUP LIMIT POINTER
;***END OF "DO NOT REORDER" BLOCK***
IFN FTDEC10!FTEXEC,<
DD(SAVCHR,1) ;PRESET RESULT FOR NEXT CALL TO RDBIN
DD(LASCHR,1) ;ANSWER FROM LAST CALL TO RDBIN
> ;END IFN FTDEC10!FTEXEC
NLINBF==^D20
DD(LINBF,NLINBF) ;LINE BUFFER
IFN FTYANK,<
IFN FTEXEC,<
DD(EPTPTR,1)
DD(EPTRBF,5) ;BUFFER SO PTR WONT CHATTER
DD(EPTRND,1,<<POINT 7,EPTRBF+4,34>>);PNTR FOR LAST CHAR IN BUF
> ;END IFN FTEXEC
DD(COMAND,1) ;.NE. 0 IF IN COMMAND FILE
DD(COMCOR,1) ;.NE. 0 IF COMMAND IS FROM MEMORY STRING
DD(PTDFLG,1) ;EOF SEEN ON COMMAND FILE
YFLLEN==.FOMAX+1 ;
DD(YFLBLK,YFLLEN) ;FILOP. BLOCK FOR COMMAND FILE
YLKLEN==.RBSIZ+1
DD(YLKBLK,YLKLEN) ;LOOKUP BLOCK FOR COMMAND FILE
YPTLEN==.PTPPN+5+2
DD(YPTBLK,YPTLEN) ;PATH BLOCK FOR COMMAND FILE
YRFLEN==.FOFMX
DD(YRFBLK,YRFLEN) ;RETURNED FILESPEC BLOCK
DD(YASWF,1) ;.NE. 0 THEN ABORT $Y ON COMMAND ERROR
DD(CBUF,3) ;COMMAND FILE BUFFER RING HEADER
DD(YBFBUF,YBFSIZ) ;BUFFER FOR READING COMMAND FILE
> ;END FTYANK
DD(TOHPS,1) ;"CARRIAGE" POSITION (FOR OUTPUT)
SUBTTL STORAGE -- $X LOGIC AND PATCH COMMAND
IFE FTFILE,<
;VARIABLES USED IN $X LOGIC
DD(I.PXC,1) ;-1 IF $X01 CALLED FROM $PX
DD(I.PXF,1) ;SAVED FLAGS IN $PX ROUTINE
DD(I.REP,1) ;$X REPEAT COUNTER
DD(I.LOG,1) ;$X COUNTER (FOR $P)
DD(I.NST,1) ;INSTRUCTION BEING EXECUTED
DD(I.NSTA,1) ;AC FIELD OF INST BEING EXECUTED
DD(I.NSTE,1) ;E FIELD OF INST BEING EXECUTED
DD(I.NEA2,1) ;SECOND EA (E.G., FOR BYTE POINTER)
DD(I.NSTS,1) ;SECTION OF REFERENCE FOR I.NSTE
DD(I.NSS2,1) ;SECTION OF REFERENCE FOR I.NEA2
DD(I.NSTP,1) ;PC (A LA JSP) OF INST BEING EXECUTED
DD(I.NPC,1) ;ORIGINAL USER PC OF INSTRUCTION
; (BEFORE LAST $X CYCLE)
DD(I.NJMP,1) ;UNCONDITIONAL (JRST, ETC.) JUMP ADDRESS
DD(I.CJMP,1) ;-1 IF CONDITIONAL JUMP (E.G. AOJX)
DD(I.XJRS,1) ;XJRST VALUE AFTER DOITX'S XCT
IFN FTDEC20,<
DD(I.NECJ,1) ;COPY OF ERCAL/ERJMP IF PRESENT
DD(I.NERJ,1) ;ERCALX/ERJMPX CONVERTED TO ERJMPX
DD(I.ECJA,1) ;ERCAL/ERJMP TARGET ADDRESS
> ;END IFN FTDEC20
DD(I.NJR0,1) ;FIRST JRST INTERCEPT BLOCK WORD
DD(I.NJR1,1) ;SECOND . . . *****************************
DD(I.NJR2,1) ;THIRD . . . * NOTE THIS BLOCK ALSO USED *
DD(I.NJR3,1) ;FOURTH . . . * FOR INIT UUO SIMULATION *
DD(I.NJR4,1) ;FIFTH . . . *****************************
DD(I.KRCK,1) ;KS-10 KROCK TYPEOUT FLAG
DD(I.NXIT,1) ;DANGEROUS INSTRUCTION FLAG
DD(I.PCREF,1) ;PC-REF INSTRUCTION FLAG
DD(FLAGS,1) ;SAVES DDT FLAG REGISTER
DD(LOCSAV,1) ;SAVES LOCATION OF INST BEING EXECUTED
DD(SAFETY,1) ;SAVES T
DD(SAV0,1) ;SAVES AC 0 IN SWAP ROUTINE
DD(XCTS,1) ;XCT DEPTH COUNTER
> ;END FTFILE
;VARIABLES FOR PATCH COMMAND
DD(PTLOC,1) ;PATCH ADDRESS
DD(PTLLC,1) ;OLD LLOCO VALUE
DD(PTWRD,1) ;ORIGINAL WORD AT OLD LLOCO
DD(PTFIX,1) ;ADDRESS OF SYM TO FIX UP
DD(PTORG,1) ;-1 IF PTLOC FROM SYMBOL, 1 IF .JBFF, 0 NEITHER
DD(PTAFTR,1) ;0 IF BEFORE, -1 IF AFTER
DD(PTSYM,1) ;SYMBOL USED IN PATCHING
DD(PTVAL,1) ;ORIGINAL SYMBOL VALUE
SUBTTL STORAGE -- BREAKPOINTS
IFE FTFILE,<
DD(XSAVE,1) ;FLAGS FOR 30-BIT SAVE PC
IF1,<PURGE SAVE> ;BYPASS MACRO BUG, SAVE IS A JSYS TOO
DD(SAVE,1,%%DDT) ;SAVE THE ACS AND PI SYSTEM
DD(,1,<JRST SAVEG>)
DD(BPT$B,0) ;START OF BREAKPOINT STORAGE
.PHASE 0 ;DEFINE TAGS RELATIVE TO ZERO
B$ADR:! DD(,1) ;.GT. 0 THEN ADDRESS OF BREAKPOINT
B$XCT:! DD(,1) ; CONDITIONAL BREAK INSTRUCTION
B$CNT:! DD(,1) ; PROCEED COUNT (BREAK WHEN 0)
B$OPN:! DD(,1,-1) ;.GE. 0 THEN ADDRESS TO OPEN ON BREAKPOINT
B$STR:! DD(,1) ;.NE. 0 THEN ADDRESS OF COMMAND STRING
B$FLG:! DD(,1) ; BREAKPOINT FLAGS
BP$PRO==1B0 ; AUTO-PROCEED
BP$INS==1B1 ; BREAKPOINT INSTALLED
BP$ERM==1B2 ; ERROR MESSAGE TYPED
B$INS:! DD(,1) ; USER INSTRUCTION WHEN USER RUNNING
B$BPT:! DD(,1) ; BREAKPOINT JSR'S TO HERE
B$JSR:! DD(,1,<JSR BCOM>) ; JSR BCOM
B$SIZ==.-B$ADR ;LENGTH OF BREAKPOINT BLOCK
.DEPHASE ;BACK TO NORMAL ADDRESSING
DD(,B$SIZ*NBP) ;STORAGE FOR REST OF BREAKPOINTS
DDS(BPT$E,0) ;LAST LOCATION + 1 USED BY BREAKPOINTS
;$0BPT IS A GLOBAL LOCATION WHICH ANY USER PROGRAM MAY USE (JSR TO) IN
;ORDER TO CAUSE AN UNSOLICITED BREAKPOINT TO OCCUR (RATHER THAN MERELY
;JRST'ING TO DDT## - THE JSR TO $0BPT IS $P'ABLE). ALSO, OPERATING SYS-
;TEMS MAY UTILIZE THIS ENTRY POINT TO ENABLE USERS TO ARBITRARILY BREAK
;PROGRAM EXECUTION AND ENTER DDT IN A PROGRAM-CONTINUABLE FASHION.
$0BPT==BPT$B+B$BPT
IFE FTMON,<INTERN $0BPT>
DD(BCOM,1) ;BREAKPOINTS JSR TO HERE FIRST
DD(,1,<JRST BCOMG>) ;BCOMG DOES ALL THE REAL WORK
DD(XLEAVE,1) ;PC FLAGS FOR NON-ZERO SECTION ON BREAKPOINT
DD(LEAVE,1) ;PC ON BREAKPOINT TO GO TO IXCT8
DD(BPTIP,1) ;.NE. 0 IF BREAKPOINT IN PROGRESS ($P LEGAL)
DD(BPTDX,1) ;BREAKPOINT INDEX (NUMBER TIMES B$SIZE)
DD(SWTEM,1) ;TEMP FOR SAVE/RESTORE/SWAP (HOLDS REGISTER T)
;ALSO USED BY PHYIN (HOLDS INSTRUCTION)
DD(SAVP,1) ;HOLDS P BETWEEN JSR SAVE/JSP T,RESTOR
DD(SAVF,1) ;FLAGS GO HERE BETWEEN SAVE/RESTOR
DD(XSWAP,1) ;30-BIT PC FLAGS FOR SWAP
DD(SWAP,1)
DD(,1,<JRST SWAPG>)
> ;END IFE FTFILE
IFN FTDEC10,< ;-10 DEFAULTS $4M OFF
DD(BPBLK,1,<0>) ;IN-SECTION ADDR OF BREAKPOINT BLOCK
> ;END IFN FTDEC10
IFN FTDEC20,< ;-20 DEFAULTS $4M ON
IFE FTMON!FTEX20,<
DD(BPBLK,1,1000000-BPBMAX) ;IN-SECTION ADDRESS OF BREAKPOINT BLOCK
>
IFN FTEX20,<
DD(BPBLK,1,EDDBLK) ;BPBLK FOR KDDT
DD(FAKDDT,1) ;TOPS-20 JSR'S TO HERE
DD(,1,<JRST FAKDDG>) ; WHEN MOVING DDT AROUND
>
IFN FTMON,<
DD(BPBLK,1,MDDBLK) ;BPBLK FOR MDDT
DD(CHKCNT,1,0) ;USE COUNT FOR MDDT CHECKPOINT
>
> ;END IFN FTDEC20
DD(BYSS,1) ;BYTE SIZE FOR ASCII INPUT/OUTPUT
DD(PBYSS,1) ;PERMANENT-MODE BYTE SIZE
DD(SVBTS,1) ;BYTE MASK FOR $O TYPEOUT
DD(PSVBTS,1) ;SAVE BLOCK FOR ABOVE ON $$O
DD(BYTMSK,1) ;$3M BYTE MASK
SUBTTL STORAGE -- SYMBOL TABLE LOGIC
DD(PNTR,1,<Z INST>) ;POINTER TO BITS IN INST
DD(INST,1) ;BINARY FOR INSTRUCTION
DD(CHP,1) ;CHAR POINTER INTO OPTXT, OPTXT+1
DD(OPTXT,2) ;STORE INPUT TEXT FOR OPEVAL
DD(SAVPDL,1) ;SAVE PUSH DOWN LIST POINTER
DD(WRD,1)
DD(WRD2D,1) ;QUANTITY AFTER $ IN DECIMAL
DD(WRD2O,1) ;QUANTITY AFTER $ IN OCTAL
DD(PRNC,1)
DD(FRASE,1) ;DONT CHANGE ORDER, SEE WORD+6
DD(SYL,1)
DD(LWT,1)
DD(SYM,1)
DD(FRASE1,1)
DD(DEN,1)
DD(SEGNAM,1) ;THE HIGH SEGMENT NAME (OR 0)
;WHEN $: IS SUCCESSFULLY DONE
DD(PRGM,1) ;$:'D MODULE POINTER
; (SYMBOL INDEX TO 2ND WORD)
DD(SYPTR,1) ;BASE OF CURRENT SYMTAB OR WINDOW (R)
DD(SY2GO,1) ;NUMBER OF SYMBOLS LEFT IN CURRENT TABLE
DD(R2IDX,1) ;OFFSET TO MAKE R A SYMBOL INDEX
DD(EVFLG,1) ;FLAGS OF CURRENT SYMBOL IN EVAL
DD(EVVAL,1) ;VALUE OF CURRENT SYMBOL IN EVAL
DD(EVIDX,1) ;SYMBOL INDEX OF CURRENT SYMBOL IN EVAL
DD(LKFLG,1) ;FLAGS OF CURRENT SYMBOL IN LOOK
DD(LKVAL,1) ;VALUE OF CURRENT SYMBOL IN LOOK
DD(LKIDX,1) ;SYMBOL INDEX OF CURRENT SYMBOL IN EVAL
DD(LKMAX,1) ;THE HIGHEST KNOWN VALUE SUCH THAT THE
;FOUND SYMBOL WILL STILL BE USED FOR IT
DD(ESTUT,2) ;ADDRESS/LENGTH PAIR, COPY OF USYMP
ESTUTL=ESTUT+1 ;USED BY UNDEFINED SYM ASSEMBLER
DD(FSV,1)
DD(FH,1)
;INTERNAL SYMBOL VECTOR IN CASE WE ARE BUILT WITH LINK 5.1
IFN FTUD20,< ;USER-20 ONLY
;PROTOTYPE SYMBOL TABLE VECTOR
DD(DDTSYV,7,<7,<FLD(.R50D,ST%TYP)>,<IFIW>,0,<FLD(.R50U,ST%TYP)>,<IFIW>,0>)
> ;END IFN FTUD20
DD(SYMP,0) ;DEFINED SYMBOL TABLE POINTER BLOCK
.PHASE 0 ;DEFINE TAGS RELATIVE TO ZERO
S$ADR:! DD(,1) ;ADDRESS OF SYMBOL TABLE
S$LEN:! DD(,1) ;LENGTH OF SYMBOL TABLE (MUST BE S$ADR+1)
S$SUB:! DD(,1) ;PDV SUBTABLE ADDRESS OR IOWD ADDRESS
S$SUF:! DD(,1) ;LH: IOWD OR VECTOR SUBTABLE FLAG
;RH: RESERVED
IFN FTFILE,<
S$OLN:! DD(,1) ;ORIGINAL LENGTH WORD
S$OPT:! DD(,1) ;ORIGINAL POINTER WORD
> ;END IFN FTFILE
S$SIZ==.-S$ADR ;LENGTH OF SYMBOL BLOCK
.DEPHASE ;BACK TO NORMAL
DD(USYMP,S$SIZ) ;UNDEFINED SYMBOL TABLE BLOCK
DD(HSYMP,S$SIZ) ;HISEG SYMBOL TABLE BLOCK
DD(SYTLOC,1) ;-1,,JOBDAT SECTION /OR/ PDVA
; /OR/ SYMTAB VECTOR ADDR (-10 ONLY)
IFE FTMON!FTFILE,< ;SOME DON'T NEED PDV STORAGE
IFN FTDEC20,<
DD(PDVARG,6,<6,.FHSLF>) ;PDVOP% ARG BLOCK - SIZE, FORK
> ;END IFN FTDEC20
DD(PDVA,1) ;DATA BLOCK FOR PDVOP%
> ;END IFE FTMON!FTFILE
IFN FTUD20,< ;USER-20 ONLY
DD(DDTPDV,1) ;DDT'S OWN PDV ADDRESS
> ;END IFN FTUD20
IFN FTDEC10,< ;TOPS-10 ONLY
DD(SEGOPB,.SGFSP,.SGINF) ;SEGOP. UUO .SGINF BLOCK
DD(,1,<<IFIW SEGFIL>>) ;POINTER TO FILESPEC BLOCK FOR HISEG
DD(SEGFIL,.SGFLN) ;HISEG ORIGIN FILESPEC BLOCK
> ;END IFN FTDEC10
DD(ENDSUB,1) ;END OF VECTOR PROCESSED BY PDVBLK
IFN FTEX10,<
DD(HSBLK,1) ;0 IF SYMBOLS NOT HIDDEN, ELSE BLOCK ADDRESS
DD(JOBEDV,1) ;ADDRESS OF THE EXEC DATA VECTOR
DD(CPNDDT,1) ;WORD TO POKE WHEN HITTING A BREAKPOINT
DD(CPNBIT,1) ;BIT TO SET IN CPNDDT ON A BREAKPOINT
> ;END IFN FTEX10
IFN FTDEC10&FTFILE,<
DD(JOBEDV,1) ;NON-ZERO IFF CRASH FILE HAD A USEFUL EDV
DD(EDVEPT,1) ;EPT PAGE NUMBER FROM EDV
DD(EDVSPT,1) ;INCOMING SPT ADDRESS
DD(EDVCST,1) ;INCOMING CST ADDRESS
> ;END IFN FTDEC10&FTFILE
;SYMBOL TABLE CACHE DATA:
IFN FTSCSH,< ;ONLY IF USING SYMBOL TABLE CACHE
DD(SCNUM,1) ;NUMBER OF SYMBOLS IN THE CACHE
DD(SCTIM,1) ;TIME COUNTER FOR SETTING AGES OF SYMBOLS
DD(SCTMP,1) ;INDEX TO USE FOR A NEW SYMBOL
DD(SCSYM,SCSIZ) ;SYMBOLS IN THE CACHE
DD(SCIDX,SCSIZ) ;INDEX INTO SYMBOL TABLE FOR THIS SYMBOL
DD(SCVAL,SCSIZ) ;VALUES OF THE SYMBOLS
DD(SCMAX,SCSIZ) ;MAXIMUM VALUES SYMBOLS ARE GOOD FOR
DD(SCAGE,SCSIZ) ;AGE OF EACH SYMBOL
> ;END IFN FTSCSH
SUBTTL STORAGE -- ADDRESSING DATA
DD(SPSAV,1,<-1>) ;POINTER TO LAST SYMBOL TYPED
DD(ABBSY1,1) ;LOWER LIMIT IN ABBREV SYMBOL RANGE
DD(ABBSY2,1) ;UPPER LIMIT IN ABBREV SYMBOL RANGE
DD(ABBSY3,1) ;FLAGS MASK FOR ABBREV MATCHING
;ORDER OF LLIMIT/LLREGF/LLACCF IS IMPORTANT!
DD(LLIMIT,1) ;LOWER LIMIT WORD (SEARCHES, ETC)
; ALSO VALUE FOR DEFINING SYMBOL
DD(LLREGF,1) ;REGISTER "F" AT "<" TIME
DD(LLACCF,1) ;FLAG "ACCCF" AT "<" TIME
;ORDER OF ULIMIT/ULREGF/ULACCF IS IMPORTANT
DD(ULIMIT,1) ;UPPER LIMIT WORD (SEARCHES, ETC)
DD(ULREGF,1) ;REGISTER "F" AT ">" TIME
DD(ULACCF,1) ;FLAG "ACCCF" AT ">" TIME
DD(LLOC,1) ;LAST LOCATION (E.G., LOCATION/, ETC.)
DD(LLOCO,1) ;LAST LOCATION OPEN
DD(LLOCS,1) ;DEFAULT SECTION
DD(PDFSEC,1,-1) ;PERMANENT DEFAULT SECTION
DD(SAVLP,1) ;POINTER TO SAVLOC TABLE
DD(SAVLTB,NSAVTB) ;SAVLOC (PC RING BUFFER) TABLE (FOR $<CR> ETC.)
DD(TENSYM,1) ;HOLDS TENTATIVE VALUE WHEN EVAL'ING SYMBOLIC OP
DD(SKPCT,1) ;SKIP COUNT FOR XCT
DD(LASEAF,1) ;LAST WORD USED IN EFFECTIVE ADDRESS CALCULATION
DD(EAGLOB,1) ;EA LOCAL/GLOBAL FLAG
DD(UBASE,1) ;RELOCATION BASE ADDED TO USER ADDRESS
DD(UPROT,1,<<377777,,777777>>);PROTECTION LIMIT FOR USER ADDRESS
;ORDER OF PATCH? ENTRIES IS CRITICAL!!!!!
DD(PATCHS,1,<<FTUE10>>);-1 IF PATCHING ENABLED
; DEFAULT ON FOR TOPS10 ^-FILDDT
; DEFAULT OFF FOR TOPS20
DD(PATCHC,1,<FTDEC20>) ;-1 IF AUTO-PAGE-CREATE
; DEFAULT OFF FOR TOPS10
; DEFAULT ON FOR TOPS20
PAMAX==2 ;MAX INDEX FOR $[$]NW
DD(LASTPG,1) ;LAST PAGE ADDRESS REFERENCED
DD(LASTAC,1) ;PAGE ACCESS BITS FOR LASTPG
IFN FTDEC10,<
DD(LASTAF,1) ;FULL PAGE ACCESS BITS FOR LASTPG
DD(S0PLIM,1) ;MASK FOR INACCESSIBLE ADDRS FROM SEC. 0
> ;END IFN FTDEC10
DD(NZSXJF,2) ;FOR XJRSTF INTO SECTION 1 ACS
;STORAGE FOR SAVFL TO RESTORE FLAGS AFTER PAGE FAULT
DD(SATEM1,1) ;FLAGS IN NON-0 SECTIONS
DD(SATEM2,1) ;PC OR FLAGS,,PC
;STORAGE FOR RESTOR
DD(RSTM1,1) ;NON-ZERO IF ENTERED AT RESTRX
;STORAGE FOR TTYRET
DD(TTEM1,1) ;TENTATIVE HSBLK
DD(TTEM2,1) ;SAVED R
DD(TTEM3,1) ;TOTAL BLOCK COUNT
SUBTTL STORAGE -- SAVE AREAS FOR PREVIOUS CONTEXT
;SAVED CPU STUFF - AVAILABLE VIA $I "ADDRESS". ALTHOUGH THE APR AND
;PI CONTEXTS ARE MEANINGFUL ONLY TO EDDT ALL WORDS ARE PRESENT IN
;ALL FLAVORS OF DDT SO THAT $I MAY SOMEDAY BE MADE TO WORK MEANING-
;FULLY EVEN IN FILDDT.
DD(SAVPI,1) ;($I+00) SAVED (CONI) PI IN EXEC MODE
DD(,1,1177) ;($I+01) PI CHANNELS TURNED OFF BY EDDT
DD(SAVAPR,1) ;($I+02) SAVED (CONI) APR IN EXEC MODE
DD(PCFLG,1) ;($I+03) SAVED PC FLAGS
DD(PCWRD,1) ;($I+04) SAVED PC WORD (A LA JSR)
DD(EPTWRD,1) ;($I+05) EXEC PROCESS TABLE PAGE NUMBER
DD(UPTWRD,1) ;($I+06) USER PROCESS TABLE PAGE NUMBER
DD(CSTWRD,1) ;($I+07) CST BASE ADDRESS (VIRTUAL)
DD(SPTWRD,1) ;($I+08) SPT BASE ADDRESS (VIRTUAL)
DDS(ENDPI,0) ;DEFINE END OF LEGAL $I RANGE FOR DDSYMC
;STATE VARIABLES SUCH AS EXEC-MODE FLAG AND CPU-TYPE
DD(SECDDT,1) ;SECTION IN WHICH DDT IS RUNNING,,0
IFN FTUD20,< ;STUB EXISTS ONLY IN USER-20
DD(SECUDD,1,-1) ;<SECTION OF UDDT STUB,,0> OR -1
> ;END IFN FTUD20
DD(USRFLG,1) ;.LT. 0 IF IN USER MODE (EXEC DDT ONLY)
DDS(BZ$FLG,0) ;START OF FLAGS TO BE CLEARED ON ENTRY
DDS(BZ$CPF,0) ;START OF CPU FLAGS AREA
DD(KAFLG,1) ;.NE. 0 IF CPU IS KA-10
DD(KIFLG,1) ;.NE. 0 IF CPU IS KI-10
DD(KLFLG,1) ;.NE. 0 IF CPU IS KL-10
DD(KSFLG,1) ;.NE. 0 IF CPU IS KS-10
DD(KLSFLG,1) ;.NE. 0 IF CPU IS KL-10 OR KS-10
DDS(ZZ$CPF,0) ;END (+1) OF CPU FLAGS AREA
DD(KIPAG,1,<0>) ;.NE. 0 IF KI-PAGING
DD(KLPAG,1,<-1>) ;.NE. 0 IF KL-PAGING
DDS(ZZ$FLG,0) ;END OF FLAGS TO BE CLEARED
;SOME TEMPORARIES FOR FV??? ROUTINES
IFN FTEXEC,<
DD(FVTEM1,1)
DD(FVTEM2,1)
DD(FVTEM3,1)
DD(FVTEM4,1)
> ;END OF IFN FTEXEC
;STATE VARIABLES FOR $U COMMANDS
DD(ACWRD,1) ;DATAO PAG, TO SET OLD AC BLOCK BACK
DD(FAKEAC,1) ;NON-ZERO TO USE FAKE 0-17
DD(FAKEAD,1) ;LAST ADDRESS SPECIFIED IN $5U
DD(MAPFN,1) ;FLAGS,,FUNCTION WHEN $U MAPPING IN EFFECT:
; WHOLE WORD NEGATIVE IF PHYSICAL ADDRESSING
; 1B1 MEANS CONTENTS OF MAPPG IS SPT OFFSET
; FUNCTIONS ARE DEFINED IN PFNDSP AND MFNDSP
DD(MAPPG,1) ;DATA PER MAPFN, PAGE # OR SPT OFFSET
;THESE LOCATIONS MUST BE IN ORDER - THEY ARE USED TO SAVE AND
;RESTORE THE STATE OF DTE FOR KL10
DD(SAVTTY,1) ;**** MUST BE IN ORDER
IFN FTEXEC,<
;KL10 SAVE LOCATIONS
DD(SAVUNS,1)
DD(SAVEPW,1)
DD(SAVERW,1)
DD(SAVDPW,1)
DD(SAVDRW,1) ;**** END OF MUST BE IN ORDER BLOCK
DD(MTRCNI,1) ;RESULT OF CONI MTR,
DD(TIMCNI,1) ;RESULT OF CONI TIM,
DD(MSTRDT,1) ;ID OF MASTER -11
DD(DING11,1) ;PROTOTYPE CONO WORD FOR DTE
;KS10 SAVE LOCATIONS
DD(SAVTIM,2) ;SAVED TIME BASE
> ;END IFN FTEXEC
IFN FTDEC20,<
DD(SAVTT2,1) ;SAVED RFCOC% WORDS
DD(SAVTT3,1)
DD(SAVTIW,1) ;SAVED TERMINAL INTERRUPT MASK
DD(SAVSTS,1) ;SAVED PSI STATE
DD(SAVNXP,1) ;PAGE-CREATE CHANNEL FLAG
> ;END IFN FTDEC20
DD(MSK,1,-1) ;INITIAL SEARCH MASK
DD(SYMVAL,1) ;NON-ZERO IF WE TRUST @USYMP ETC.
IFN FTEXEC,<
DD(PAGVAL,1) ;NON-ZERO IF WE TRUST ???WRD
;WE ALWAYS TRUST ???WRD IN NON-EDDTS
DD(PAGVAS,1) ;IF SAVED PAGING DATA IS VALID
DD(EPTWRS,1) ;SAVED EPTWRD IN OTHER SPACE
DD(UPTWRS,1) ;SAVED UPTWRD IN OTHER SPACE
DD(SPTWRS,1) ;SAVED SPTWRD IN OTHER SPACE
DD(CSTWRS,1) ;SAVED CSTWRD IN OTHER SPACE
DD(ADRSPC,1) ;NON-ZERO IF IN SYMBOL SPACE
> ;END OF IFN FTEXEC
DD(AC0,17) ;STORAGE FOR FAKE 0 - 17
DD(AC17,1) ; . . .
;STORAGE FOR $L COMMAND
DD(OLDBTS,1) ;ACCESS OF LAST PAGE CHECKED
DD(LOWPAG,1) ;FIRST PAGE OF CURRENT GROUP
DD(HGHPAG,1) ;LAST PAGE OF CURRENT GROUP
IFN FTUE10,<
DD(OLDSPY,1) ;FLAG FOR PA.GPN VALIDITY
> ;END IFN FTUE10
IFN FTPAGM,<
DD(MAPBTS,1) ;STORAGE FOR MAP ENTRY BITS FROM MAPADR
> ;END IFN FTPAGM
SUBTTL STORAGE -- STATE VARIABLES
DD(SCHM,1,<EXP PIN>) ;DO NOT CHANGE ORDER
DD(ARM,1,<EXP PADSO>)
DD(ODFM,1,<EXP 10>)
DD(SCHR,1) ;CELLS TO STORE TYPEOUT MODES AT START
DD(ARR,1) ; OF COMMAND, IN CASE REPARSE NEEDED
DD(ODFR,1) ;** DO NOT CHANGE ORDER OF THESE 3 **
DD(SARS,1)
DD(TEM,1)
DD(TEM1,1)
DD(SYMOFS,1,<EXP ADRNGE>) ;RANGE FOR SYMBOL+OFFSET TYPEOUT
IFN FTEXEC,<
DD(XNXTCH,1) ;PRESET INPUT CHAR AT XLISTE
DD(XTYPAC,1) ;COUNT OF TYPEAHEAD CHARACTERS
DD(XTYPAG,1) ;TYPEAHEAD BYTE GETTER
DD(XTYPAP,1) ;TYPEAHEAD BYTE PUTTER
DD(XTYPAX,1) ;TYPEAHEAD CHECK COUNTER (EVAL, LOOK)
DD(XTYPAB,XTYPAW) ;TYPEAHEAD BYTE BUFFER
> ;END IFN FTEXEC
IFN FTDEC10,< ;SUNDRY TOPS-10 STUFF
DD(MYPPN,1) ;USED BY FSCAN
DD(FSBLK,1) ;.NE. 0 IF FSCAN SAW SOMETHING EXCITING
DD(FSDEV,1) ;DEVICE
DD(FSFIL,1) ;FILENAME
DD(FSEXT,1) ;FILETYPE
DD(FSPPN,1) ;FILE PPN
DD(FSSFD,5) ;FILE PATH SFD'S
FSLEN==.-FSBLK ;LENGTH OF AREA FOR FSCAN TO CLEAR
> ;END IFN FTDEC10
SUBTTL STORAGE -- FILDDT
IFN FTFILE,< ;FILDDT STUFF
DDS(FWAZER,0) ;START OF AREA TO ZERO
IFN FTDEC10,< ;TOPS-10 SPECIFIC FILDDT STUFF
FLPLEN==.FOMAX+1 ;LENGTH OF FILOP. BLOCK
DD(FLPBLK,FLPLEN) ;FILOP. BLOCK
LKPLEN==.RBSIZ+1 ;LENGTH OF LOOKUP BLOCK
DD(LKPBLK,LKPLEN) ;LOOKUP BLOCK
PTHLEN==.PTPPN+5+2 ;LENGTH OF PATH BLOCK
DD(PTHBLK,PTHLEN) ;PATH BLOCK
RFSLEN==.FOFMX ;LENGTH OF RETURNED FILESPEC BLOCK
DD(RFSBLK,RFSLEN) ;RETURNED FILESPEC BLOCK
DSKLEN==.DCUSZ+1 ;LENGTH OF DSKCHR BLOCK
DD(DSKBLK,DSKLEN) ;DSKCHR BLOCK (FOR /U)
DD(DSKCHA,1) ;DSKCHR AC (FOR /U)
DD(POKBLK,3) ;FOR POKE'ING THE MONITOR
> ;END OF IFN FTDEC10
IFN FTDEC20,< ;TOPS-20 SPECIFIC FILDDT STUFF
DD(SAVRET,1) ;RETURN ADDRESS OF CMDINI CALLER
DD(SAVREP,1) ;SAVED STACK POINTER TO RESTORE ON REPARSE
DD(CMDBLK,.CMGJB+5) ;COMMAND STATE BLOCK FOR COMND JSYS
DD(BUFFER,BUFSIZ) ;INPUT TEXT STORED HERE
DD(ATMBFR,ATMSIZ) ;ATOM BUFFER FOR COMND JSYS
DD(NOIFDB,FDBSIZ) ;FUNCTION DESCRIPTOR BLOCK FOR NOISE WORDS
DD(THAWSW,1) ;-1, IF THAWED FILE ACCESS; 0, IF FROZEN
> ;END OF IFN FTDEC20
;STILL IFN FTFILE
DD(LBUF,3)
DD(SYMGOT,1) ;SYMBOL TABLE CAME FROM CURRENTLY OPEN FILE
DD(FILING,1) ;-1 IF FILE I/O; 0 IF PEEK AT RUNNING MONITOR
DD(FDIDSW,1) ;"/D" TYPED IF .NE. 0
DD(FDIFSW,1) ;-1 IF "/F" TYPED
DD(JOBING,1) ;.NE. 0 THEN JOB NUMBER RATHER THAN MONITOR
DD(FDIMSW,1) ;-1 IF "/M" TYPED
DD(CHGSFL,1) ;CHANGED SYMBOL TABLE
DD(WINNUM,1) ;WINDOW TO READ OR WRITE
DD(WINTT1,1) ;TEMP HOLD OF TT1 (WINDOW NUMBER)
DD(WINTT2,1) ;TEMP HOLD OF TT2 (FILE PAGE NUMBER)
DD(WINDIR,WINMAX) ;MODIFIED BIT FOR MEMORY WINDOW
DD(MAXSIZ,1) ;HIGHEST LOC (+1) IN MONITOR OR FILE
;(USED SO WE WON'T EXAMINE PAST END)
DD(JOBHSO,1) ;START OF HISEG IN .EXE FILE
DD(NUMSEG,1) ;COUNT OF SEGMENTS IN THIS EXE FILE
DD(LSTNPG,1) ;LAST XLATED PAGE IN CHKADR
DD(EXEFMT,1) ;.NE. 0 IF FILE IS IN .EXE FORMAT
DD(PDVNUM,1) ;# PDVS READ FROM EXE FILE
DD(PDVTBL,1) ;POINTER(W2) TO PDV LIST
DD(EVLEN,1) ;ENTRY VECTOR LENGTH FROM EXE FILE
DD(EVADR,1) ;ENTRY VECTOR ADR FROM EXE FILE
;STILL IFN FTFILE
DDS(FCMZER,0) ;HERE TO LWAZER CLEAR ON EVERY TOPS-20
IFN FTDEC20,< ;PROMPT.
DD(GJFBLK,GJFSIZ) ;GTJFN BLOCK FOR COMND JSYS
DD(NAMBUF,50) ;BUFFER FOR NAME OF INPUT FILE
DD(FILJFN,1) ;JFN OF OPEN FILE
DD(PHYARG,1) ;DEV DESIGNATOR OF STRUCTURE OR CKU NUMBERS
DD(PHYSPP,1) ;NUMBER OF SECTORS PER PAGE FOR DISK UNITS
DD(STRBUF,2) ;STORAGE FOR STRUCTURE NAME
DD(ALIBUF,2) ;STORAGE FOR STRUCTURE ALIAS
MBLKL==.MSRSU+1 ;LENGTH OF MSTR BLOCK
DD(MBLK,MBLKL) ;MSTR ARG BLOCK
DD(WINFAC,WINMAX) ;FILE PAGE ACC FOR THIS WINDOW (PARALLEL
; TO WINFPN)
> ;END IFN FTDEC20
DD(SYMGET,1) ;-1 IF /S, 0 IF NOT
DD(PHYSIO,1) ;DSKOP ARG (T1) IF SUPER I/O (-1 ON -10)
DDS(LWAZER,0) ;END OF AREA TO ZERO + 1
DDS(FWAONE,0) ;START OF AREA TO ONE
DD(DEPNCT,1) ;COUNT OF POKE FAILURES
DD(WINFPN,WINMAX) ;FILE PAGE NUMBER FOR THIS WINDOW
DDS(LWAONE,0) ;END OF AREA TO SET TO -1
IFN FTDEC20,<
DD(XPKBLK,.XPLEN,<.XPLEN,.XPPEK,1,Z,Z,T>)
;XPEEK% ARGUMENT BLOCK
> ;END IFN FTDEC20
DD(WIND0,1) ;BASE ADDRESS OF WINDOW BUFFER AREA
DD(FISBEG,1) ;FIRST LOC OF FILDDT'S COPY OF SYMS
DD(FISEND,1) ;LAST LOC
DD(FISCNT,1) ;NUMBER OF SYMBOLS FILDDT FOUND
DD(FOSPTR,S$SIZ) ;SYMP ON FILDDT STARTUP
DD(FOUPTR,S$SIZ) ;USYMP ON FILDDT STARTUP
DD(FOHPTR,S$SIZ) ;HSYMP ON FILDDT STARTUP
DD(PAGTBL,1) ;PTR TO .EXE DIRECTORY
;1 WORD FOR EVERY VIRT. PAGE
;BITS 0-4 .EXE FORMAT FLAGS
;RH - FILE PAGE NUMBER
DD(PGTLEN,1) ;LENGTH OF PAGTBL (HIGHEST PAGE+1)
> ;END IFN FTFILE
SUBTTL STORAGE -- PUSH DOWN LIST
DD(XPDL,1) ;USED TO STORE RET FOR TOP-LEVEL POPJ'S
DD(PDL,LPDL-1) ;STORAGE FOR PUSH DOWN LIST
IFN FTPURE,<
DDS(VAREND,0) ;END OF INITIALIZED VARIABLES AREA
IFN FTMON,<
DD(SETRT1,1) ;SCRATCH FOR VARIABLE INITIALIZATION
> ;END IFN FTMON
> ;END IFN FTPURE
DDS(END.V,0) ;END OF VARIABLES
IFE FTPURE,<
LEN.V==END.V-BEG.V ;LENGTH OF VARIABLE AREA
> ;END IFE FTPURE
IFN FTPURE,<
LEN.V==.-PHVAR ;AVOID E ERROR IN PRINTX
> ;END IFN FTPURE
IFN FTPURE&<^-FTMON>,<
IFGE VARLOC,<
.ENDPS ;BIND OFF {DDTCOD|.HIGH.}
.PSECT DDTVAR/RWRITE,VARLOC
BLOCK LEN.V ;ALLOCATE THE SPACE
>>
IFGE RUNLOC,<IFGE VARLOC,<IFL <VARLOC-RUNLOC>,<
;>>> DDTEND: ;DDTEND GOES HERE UNLESS WE'RE SURE
;THAT VARIABLES ARE BELOW CODE
DEFINE PRROOM(WORDN,AREAN),<
IF2,<
PRINTX [WORDN words left in AREAN area]
>
> ;END DEFINE PRROOM
DEFINE PRFULL(WORDN,AREAN),<
IF2,<
PRINTX ? The AREAN area has overflowed by WORDN words
>
> ;END DEFINE PRFULL
RADIX 10
IFN <<VARLOC+1>!FTMON>,<
VARSPC==NDDTPG_PG2WRD-LEN.V ;ROOM IN DATA PAGE
IFGE VARSPC,<PRROOM(\VARSPC,<data>) >
IFL VARSPC,<PRFULL(\<-VARSPC>,<data>) >
>
IFGE RUNLOC,<
IFE FTMON,<
IFGE <VARLOC-RUNLOC>,<CODSPC==VARLOC-<RUNLOC+LEN.C>> ;ROOM TILL DATA
IFL <VARLOC-RUNLOC>,<CODSPC==^O1000000-<RUNLOC+LEN.C>> ;ROOM TILL END
IFGE CODSPC,< PRROOM(\CODSPC,<code>) >
IFL CODSPC,< PRFULL(\<-CODSPC>,<code>) >
> ;END IFE FTMON
> ;END IFGE RUNLOC
RADIX 8
;THE FOLLOWING DEFINES CERTAIN SYMBOLS RELEVANT TO HARDWARE OR TO
;DDT ITSELF. THESE ARE *NOT* NEEDED FOR THE ASSEMBLY OF DDT AND
;IN FACT MAY BE IN CONFLICT WITH DEFINITIONS WHICH ARE USED
;DURING ASSEMBLY (E.G. TTY). HENCE, THESE DEFINITIONS ARE ASSEMBLED
;LAST AND ON PASS 2 ONLY. THE SYMBOLS ARE ALL DECLARED INTERNAL
;SO THAT THEY WILL BE KEPT IN THE PROGRAM SYMBOL TABLE AFTER
;LOADING. THESE SYMBOLS ARE THEN USED DURING DDT INSTRUCTION
;ASSEMBLY OR DEASSEMBLY ONLY.
IFE FTDEC20,< ;NEVER FOR TOPS20
IF2,< ;ONLY DEFINE GLOBALS PASS 2
IFE FTFILE,< ;NOT NEEDED IN FILDDT
IFE FTDBUG,< ;ONLY DEFINE GLOBALS FOR REGULAR DDTS
DEFINE XP (SS,VV)<
PURGE SS ;AVOID MACRO BUG
SS=:VV ;DEFINE
> ;END DEFINE XP
;DEFINE $ SYMBOLS INTERNAL TO DDT
RADIX 10
DEFINE DBPNT (Z.)<XP $'Z.'B,<BPT$B+<B$SIZ*Z.>>>
ZZ==-1
REPEAT NBP+1,<DBPNT \<ZZ==ZZ+1>>
RADIX 8
XP $M,<MSK>
XP $I,<SAVPI>
> ;END IFE FTDBUG
;DEFINE I/O DEVICE MNEMONICS
IFN FTEXEC,<
XP PI,004B11
XP PAG,010B11
XP CCI,014B11
XP DLB,060B11
XP DLC,064B11
XP CLK,070B11
XP PTP,100B11
XP PTR,104B11
XP CDP,110B11
XP CDR,114B11
XP TTY,120B11
XP LPT,124B11
XP DIS,130B11
XP PLT,140B11
XP CR,150B11
XP DSK,170B11
XP DTE,200B11
XP UTC,210B11
XP UTS,214B11
XP MTC,220B11
XP MTS,224B11
XP MTM,230B11
XP DLS,240B11
XP DPC,250B11
XP DCSA,300B11
XP DCSB,304B11
XP DTC,320B11
XP DTS,324B11
XP TMC,340B11
XP TMS,344B11
> ;END IFN FTEXEC
;DEFINE EXTENDED OPERATIONS
XP PORTAL,PORTAL
XP JRSTF,JRSTF
XP HALT,HALT
XP XJRSTF,XJRSTF
XP XJEN,XJEN
XP XPCW,XPCW
XP JEN,JEN
XP XSFM,XSFM
XP XJRST,XJRST
XP JOV,JOV
XP JFOV,JFOV
XP JCRY0,JCRY0
XP JCRY1,JCRY1
XP JCRY,JCRY
> ;END IFE FTFILE
> ;END IF2
> ;END IFE FTDEC20
;ONLY STARTING ADDRESS FOR FILDDT AND VMDDT ON TOPS-10.
;NO START ADDRESS FOR EXEC OR USER DDT
;BECAUSE USER PROGRAMS AND MONITOR ARE LOADED
;WITH EXEC OR USER DDT
;BUT STILL WANT TO BE STARTED AT THEIR OWN START ADDRESSES.
;
;ON TOPS-20, ALL USER DDTS HAVE START ADDRESSES.
;THE MONITOR IGNORES THEM UNLESS USER RUNS DDT BY ITSELF
IFE FTDSYM,<XPUNGE> ;PURGE LOCALS IF SO DESIRED
IFE FTDBUG,<
IFN FTFILE!FTVMX,<
END DDT> ;FILDDT OR VMDDT START ADDRESS
IFN FTUD20,<
END <1,,DDT>> ;TOPS-20 ENTRY VECTOR
> ;END IFE FTDBUG
IF2,< ;ONLY KILL SYMBOLS PASS 2 WHEN DONE WITH THEM
IFN FTDBUG,<
IFN FTFILE!FTVMX,<
END DEBDDT> ;FILDDT OR VMDDT START ADDRESS
IFN FTUD20,<
END <1,,DEBDDT>> ;TOPS-20 ENTRY VECTOR
PURGE DDT,DDTEND
IFE FTFILE,<
SYN $0BPT,$0DPT ;GENERATE DEBUGGING JSR ENTRY POINT
PURGE $0BPT
> ;END IFN FTFILE
IFN FTEXEC,<PURGE DDTX>
IFN FTMON,<PURGE MDDTX>
> ;END IFN FTDBUG
> ;END IF2
END