There are 11 other files named edt.doc in the archive. Click here to see a list.
EDT.DOC -- V1.0 January 1985
COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1984, 1985.
ALL RIGHTS RESERVED.
THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
This document describes how to install version 1.0 of the EDT-20
editor on the DECSYSTEM-20.
This manual is intended for the system manager responsible for
installing and maintaining the EDT.
You can find additional information in the EDT User Reference Manual
and EDT Primer.
EDT is an interactive text editor currently available on several
DIGITAL operating systems including: VAX/VMS, RSTS/E, RSX-11M, and
RSX-11M-PLUS. EDT-20 Version 1.0 adds TOPS-20 to that list as a
member of the EDT product family. EDT-20 is compatible with VAX/11
EDT Version 3.0, and is a bundled product.
EDT Version 1.0 will run under TOPS-20 version 5.1 or later
monitors and under TOPS-20 version 4.1 or later monitors for KL model
A and 2020 processors. It requires Microcode 326 or later.
Refer to the beware file, EDT.BWR, for hints and potential problems.
3.0 PRODUCT SOURCES
The EDT V1.0 kit contains product sources in machine readable form.
These sources are included only as a reference and are not warranted
or supported by Digital Equipment Corporation.
The sources are also included to build MAKHLP.EXE and WAIT.EXE. These
are included for use only as a reference with their use in the EDT
build procedure. MAKHLP.EXE and WAIT.EXE are not warranted or
supported by Digital Equipment Corporation.
4.0 COMPATIBILITY WITH VAX/11 EDT
EDT-20 is compatible with VAX/11 EDT V3.0.
5.0 KNOWN BUGS AND DEFICIENCIES
There are no known bugs or deficiencies as of January, 1985.
6.0 DECSYSTEM-20 Installation
The first step in installation should be to restore the files from the
documentation save-set to disk, and read EDT.DOC (this file) and
Next, EDT.EXE, EDTHELP.HLB, and EDTCAL.REL should be restored to
If EDT is to be built from sources, the source save-set should be restored
to a directory pointed to by the logical name EDTSRC:. The build save-set,
which contains the control files needed to build EDT, should be restored
7.0 BUILDING EDT ON TOPS-20
Before you attempt to build EDT on
TOPS-20, make sure you have Autopatch
Tape 8, or later, installed on your
To build EDT on TOPS-20, first modify EDT.CMD so that the logical
names point to the appropriate directories on your system. The
following files are required to build EDT:
SYS: BLISS .EXE ; VERSION 4(216)
SYS: LINK .EXE ; VERSION 5.1(2066)
SYS: MACRO .EXE ; VERSION 53.1(1152)
SYS: PA1050 .EXE ; VERSION 5.1(635)
SYS: GLOB .EXE
DSK: [AREA UNDER WHICH EDT.CTL IS BEING RUN]
EDT .CTL THE EDT CONTROL FILE
EDTLIS .CTL PRODUCES EDT LISTINGS
EDTSRC: ARITH.MAC, BADKEY.BLI, CHMBEEP.BLI, CHMBEGSEN.BLI,
CHMBEGWRD.BLI, CHMCHANGE.BLI, CHMCHGC.BLI, CHMCHKCC.BLI,
CHMCLRCC.BLI, CHMCMBLIN.BLI, CHMDELCHR.BLI, CHMDELLIN.BLI,
CHMEINPUT.BLI, CHMEMESS.BLI, CHMENDWRD.BLI, CHMENTTRM.BLI,
CHMEXCOM.BLI, CHMEXVERB.BLI, CHMFINENT.BLI, CHMFINSTR.BLI,
CHMGBUF.BLI, CHMGCOUNT.BLI, CHMGDIR.BLI, CHMGINSTR.BLI,
CHMGQUSTR.BLI, CHMGSUSTR.BLI, CHMHLPKPD.BLI, CHMINIT.BLI,
CHMINSCHR.BLI, CHMINSMOD.BLI, CHMINSSTR.BLI, CHMINSTAB.BLI,
CHMKEYWRD.BLI, CHMMESS.BLI, CHMMRKCHG.BLI, CHMNEWLEN.BLI,
CHMONSTR.BLI, CHMPAREN.BLI, CHMPARSE.BLI, CHMPASTE.BLI,
CHMREPOS.BLI, CHMSAVLIN.BLI, CHMSAVPOS.BLI, CHMSAVTXT.BLI,
CHMSCHSTR.BLI, CHMSELPOS.BLI, CHMSENDEL.BLI, CHMSPLLIN.BLI,
CHMSUBS.BLI, CHMTADJ.BLI, CHMUNDEL.BLI, CLRKEY.BLI,
CMPLNO.MAC, COMAND.MAC, CPYMEM.MAC, DATA.BLI,
DEFKEY.BLI, EDT.BLI, EDTCAL.MAC, EXEC.BLI,
EXTEND.BLI, FCHAR.BLI, FCOLINC.BLI, FCRLF.BLI,
FDEC.BLI, FILEIO.BLI, FILL.BLI, FINAL.BLI,
FINDKEY.BLI, FINDPARA.BLI, FIXNOTRUN.BLI, FLITERAL.BLI,
FPUT.BLI, FPUTCHAR.BLI, FPUTMES.BLI, FSTRING.BLI,
FTEXT.BLI, GETFSPEC.BLI, HEADER.BLI, HELP.BLI,
HELPER.MAC, INIT.BLI, INPUT.BLI, IOMOD.BLI,
KEYCHR.BLI, KEYCOM.BLI, KEYDEFKEY.BLI, KEYFMTSTR.BLI,
KEYIMMINP.BLI, KEYPAD.BLI, KEYPADDEF.L36, KEYPUTCHR.BLI,
KEYTRNCHR.BLI, LCLEAR.BLI, LDEFK.BLI, LDEFM.BLI,
LDELETE.BLI, LDIVISION.BLI, LFCOUNT.BLI, LFILL.BLI,
LFLNO.BLI, LGETSTR.BLI, LINCL.BLI, LINSERT.BLI,
LMOVE.BLI, LNONCTG.BLI, LPRINT.BLI, LPUSH.BLI,
LPUTCHR.BLI, LQUERY.BLI, LRES.BLI, LSET.BLI,
LSHOW.BLI, LSUB.BLI, LSUBS.BLI, LSUBSN.BLI,
LTADJ.BLI, LTYPE.BLI, LWRITE.BLI, LXCOM.BLI,
LXPRINT.BLI, MACCAL.BLI, MAKHLP.MAC, MCBOTTOM.BLI,
MCCHANGE.BLI, MCDOWN.BLI, MCGETLIN.BLI, MCLEFT.BLI,
MCRIGHT.BLI, MCTOP.BLI, MCUP.BLI, MEMMAN.MAC,
MESS.BLI, MESSAGE.BLI, NAMES.BLI, NOOPEN.BLI,
PAUDIT.BLI, PRFILE.BLI, PRGETKEY.BLI, PRGETTOK.BLI,
PRLINNUM.BLI, PRMACCAL.BLI, PRPARCOM.BLI, PRPUSH.BLI,
PRRANGE.BLI, PRSWITCH.BLI, RANNEXT.BLI, RANREPOS.BLI,
RANRPOS.BLI, REAJOUTEX.BLI, SAUDIT.BLI, SCRBLOB.BLI,
SCRCHKREV.BLI, SCRCOMCUR.BLI, SCRCURS.BLI, SCRDELETE.BLI,
SCRELINE.BLI, SCRESCR.BLI, SCRFCURS.BLI, SCRFIND.BLI, SCRINIT.BLI, SCRINSERT.BLI, SCRMCOL.BLI, SCRMOVETO.BLI,
SCRNCOL.BLI, SCRNEWDEL.BLI, SCRNEWINS.BLI, SCRNOREV.BLI,
SCRNOSCR.BLI, SCRREGION.BLI, SCRRELPOS.BLI, SCRRESET.BLI,
SCRREV.BLI, SCRRLIN.BLI, SCRUPDATE.BLI, SCRWID.BLI,
SCRZAPSIN.BLI, SETCOMMAN.BLI, SUPPORTS.L36, T20SYS.BLI,
TIAUTO.BLI, TICHAR.BLI, TICLRAUD.BLI, TIDELETE.BLI,
TIECHO.BLI, TILINE.BLI, TISAVE.BLI, TITYPAHD.BLI,
TRACE.MAC, TRACER.MAC, TRANSLATE.L36, TSTKEYDEF.BLI,
UCVTCASE.BLI, UEXACASE.BLI, UFBUFFER.BLI, UFSTRING.BLI,
UGBUFFER.BLI, USSTRING.BLI, USSUBS.BLI, WFAPPBKT.BLI,
WFBOTTOM.BLI, WFCLEAR.BLI, WFCOPLIN.BLI, WFDELBKT.BLI,
WFDELLIN.BLI, WFECOPY.BLI, WFENDINS.BLI, WFEOB.BLI,
WFGETBKT.BLI, WFINSLIN.BLI, WFLOCLIN.BLI, WFOPNBUF.BLI,
WFRBUKT.BLI, WFREABCK.BLI, WFREACUR.BLI, WFREAFWD.BLI,
WFREAINP.BLI, WFREPLIN.BLI, WFRESEQ.BLI, WFSCOPY.BLI,
WFSPLBKT.BLI, WFSTRINS.BLI, WFTOP.BLI, WORDWRAP.BLI
Then submit the control file in the following manner:
o SUBMIT EDT.CTL/TIME:02:00:00/UNIQUE:YES/RESTARTABLE:YES
After the batch job finishes processing, check the log files for