Trailing-Edge
-
PDP-10 Archives
-
BB-LW55A-BM_1988
-
galaxy-sources/oprscm.mac
There are 15 other files named oprscm.mac in the archive. Click here to see a list.
TITLE OPRSCM - SEMI OPR command tables for ORION
SUBTTL Preliminaries
; COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1988.
; ALL RIGHTS RESERVED.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
; ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
; INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
; COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
; OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
; TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
; AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
; CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
; SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
SALL
SEARCH GLXMAC
SEARCH ORNMAC
SEARCH NEBMAC
SEARCH MONSYM,MACSYM
PROLOG(OPRSCM)
;Version numbers
SCMMAN==:0 ;Maintenance edit number
SCMDEV==:3 ;Development edit number
VERSIN (SCM) ;Generate edit number
.DIRECTIVE FLBLST
Subttl Table of Contents
; Table of Contents for OPRSCM
;
; Section Page
;
;
; 1. Revision History . . . . . . . . . . . . . . . . . . . 3
; 2. SEMI-OPR command tables . . . . . . . . . . . . . . . 4
; 3. START command tables for SEMI-OPR . . . . . . . . . . 5
; 4. CONTINUE command tables . . . . . . . . . . . . . . . 6
; 5. STOP command tables . . . . . . . . . . . . . . . . . 7
SUBTTL Revision History
COMMENT \
***** Release 6.0 -- begin development edits *****
1 6.1117 3-Dec-87
Place the SEMI-OPR command tables in module OPRSCM
2 6.1225 8-Mar-88
Update copyright notice.
3 6.1237 21-Apr-88
Move part of the command table from OPRCMD to here. This is a
result of adding LAT printers as a valid printer type to the commands
ALIGN, BACKSPACE, FORWARDSPACE and SUPPRESS. These changes caused
OPRCMD symbol's table to overflow.
\ ;end of revision history
SUBTTL SEMI-OPR command tables
EXTERN STOBTH,STOHGH,STOOHG
INTERN OPRSCM ;MAKE VECTOR ADDRESS AVAILABLE
OPRSCM: EXP 2 ;SIZE
EXP SEMICM ;POINTER TO THE INI FUNCTION
EXP CMSFDB ;TOP LEVEL DISPATCH FOR SEMI-OPR
SEMICM:: $INIT(CMSFDB)
CMSFDB:: $KEYDSP(CMSTAB,<$ACTION(CMDACT##),$ERROR(BADSCM)>)
CMSTAB: $STAB
IFN SOPR,<
IFN SOPRI,<ORNDSP(ALIFDB##,ALIGN,ALI)
ORNDSP(BKSFDB##,BACKSPACE,BKS)>
ORNDSP(SOCFDB,CONTINUE,CNT)
ORNDSP(EXTFDB##,EXIT,EXT)
IFN SOPRI,<ORNDSP(BKSFDB,FORWARDSPACE,FWS)>
ORNDSP(HLPFDB##,HELP,HLP)
IFN SOTAP,<ORNDSP(IDNFDB##,IDENTIFY,IDN)>
ORNDSP(PUSFDB,PUSH,PUS) ;[3]
ORNDSP(SHWFDB,SHOW,SHW) ;[3]
ORNDSP(SSDFDB,SHUTDOWN,SHD)
ORNDSP(SSTFDB,START,STA)
ORNDSP(SSPFDB,STOP,PAU)
IFN SOPRI,<ORNDSP(SUPFDB,SUPPRESS,SUP)> ;[3]
ORNDSP(TAKOPR##,TAKE,TAK)
ORNDSP(WAIOPR##,WAIT,WAI)>
$ETAB
BADSCM: MOVEI S2,[ASCIZ/Invalid SEMI-OPR command specified/]
$RETF ;BAD COMMAND
SUBTTL START command tables for SEMI-OPR
SSTFDB: $NOISE (SSTF01,<object>)
SSTF01: $KEYDSP(SSTF02)
SSTF02: $STAB
IFN SOCPH,<ORNDSP(SSTF04,<CARD-PUNCH>,CDP)>
IFN SOPTP,<ORNDSP(SSTF04,<PAPER-TAPE-PUNCH>,PTP)>
IFN SOPLO,<ORNDSP(SSTF04,<PLOTTER>,PLT)>
IFN SOPRI,<ORNDSP(SSTF11,PRINTER,LPT)>
IFN SOCRD,<ORNDSP(SSTF04,READER,RDR)>
$ETAB
SSTF04: $URANGE (CONFRM)
SSTF11: $URANGE(SSTF12)
SSTF12: $SWITCH (SSTF14,SSTF13,<$ALTERNATE(<CONFRM>)>)
SSTF13: $STAB
ORNSWI (<DEVICE:>,DEV)
$ETAB
SSTF14: $DEV(CONFRM,<$HELP(<tape drive name>)>)
SUBTTL CONTINUE command tables
SUBTTL SHUTDOWN command tables
COMMENT \
NOTE: SHOULD IT BECOME DESIRABLE FOR THE SHUTDOWN AND
CONTINUE COMMANDS TO BE NO LONGER SYNTACTICALLY IDENTICAL THEN THE
COMMON USE OF THIS PDB CHAIN DEFINITION IS NO LONGER VALID.
\
SSDFDB: $NOISE (SSD010,<scheduling for>)
SOCFDB: $NOISE (SOCF01,<object>)
SOCF01: $KEYDSP(SOCF02)
SOCF02: $STAB
IFN SOCPH,<ORNDSP(SOCF04,<CARD-PUNCH>,CDP)>
IFN SOPTP,<ORNDSP(SOCF04,<PAPER-TAPE-PUNCH>,PTP)>
IFN SOPLO,<ORNDSP(SOCF04,<PLOTTER>,PLT)>
IFN SOPRI,<ORNDSP(SOCF04,PRINTER,LPT)>
IFN SOCRD,<ORNDSP(SOCF04,READER,RDR)>
$ETAB
SOCF03: $SRANGE(CONFRM)
SOCF04: $URANGE(CONFRM)
SSD010: $KEYDSP(SSD020)
SSD020: $STAB
IFN SOCPH,<ORNDSP(SOCF04,<CARD-PUNCH>,CDP)>
IFN SOPTP,<ORNDSP(SOCF04,<PAPER-TAPE-PUNCH>,PTP)>
IFN SOPLO,<ORNDSP(SOCF04,<PLOTTER>,PLT)>
IFN SOPRI,<ORNDSP(SOCF04,PRINTER,LPT)>
IFN SOCRD,<ORNDSP(SOCF04,READER,RDR)>
$ETAB
SUBTTL STOP command tables
SSPFDB: $NOISE (SSPF01,<object>)
SSPF01: $KEYDSP(SSPF02)
SSPF02: $STAB
IFN SOCPH,<ORNDSP(SSPU01,<CARD-PUNCH>,CDP)>
IFN SOPTP,<ORNDSP(SSPU01,<PAPER-TAPE-PUNCH>,PTP)>
IFN SOPLO,<ORNDSP(SSPU01,<PLOTTER>,PLT)>
IFN SOPRI,<ORNDSP(SSPU01,PRINTER,LPT)>
IFN SOCRD,<ORNDSP(SSPU01,READER,RDR)>
$ETAB
SSPS01: $NOISE (SSPN01,<stream number>)
SSPU01: $NOISE (SSPN01,<unit number>)
SSPN01: $NUMBER (SSPN02,^D10,<number or range (n:m)>,<$ACTION(STOBTH##)>)
SSPN02: $TOKEN (SSPN03,<:>,<$HELP(<colon to specify a range>),$DEFAULT(IMMEDIATELY),>)
SSPN03: $NUMBER (SSP010,^D10,,<$ACTION(STOHGH##)>)
SSP010: $KEYDSP (SSP020,<$DEFAULT(<IMMEDIATELY>),$ALTERNATE(CONFRM)>)
SSP020: $STAB
ORNDSP(SSP030,<AFTER>,AFT)
ORNDSP(CONFRM,<IMMEDIATELY>,IMM)
$ETAB
SSP030: $KEY(CONFRM,SSP040)
SSP040: $STAB
ORNKEY(<CURRENT-REQUEST>,ACR)
ORNKEY(<EVERY-REQUEST>,AER)
$ETAB
CONFRM: $CRLF
;**;The following code to the end of OPRSCM is a part of edit 3
EXTERN CHKVAL,DSTBRK,CHKNOD,DQSCHK,LPTMSK,DQSSHO
EXTERN LATSAP,LATSHO,SHOMSK,CLUMSK,BLDCNT,CLNTAB,CHGBLK
EXTERN MAXNOD,CLNNAM,CLNTAB,SBNNAMT,STOBTH,STOHGH
EXTERN CHKPOS,FIXIT,LATSRV,STOOHG
INTERN MTNFDB,NXTFDB,PUSFDB,RPTFDB,REQFDB,RSPFDB,RTEFDB
INTERN SETFDB,STAFDB,STPFDB,SUPFDB,SWIFDB,SNDFDB,SHWFDB
INTERN UNDFDB
SUBTTL MOUNT command tables
MTNFDB: $KEY (MTN020,MTN010,<$DEFAULT(<STRUCTURE>)>)
MTN010: $STAB
ORNKEY (<STRUCTURE>,STR)
$ETAB
MTN020: $DEV (MTN030,<$HELP(<alias name>),$FLAGS(CM%PO)>)
CLUSTER<
MTN030: $SWITCH (MTN050,MTN040,<$ALTERNATE(<MTN060>)>)
>
SINGLE<
MTN030: $SWITCH (MTN050,MTN040,<$ALTERNATE(<CONFRM>)>)
>
MTN040: $STAB
ORNSWI(<STRUCTURE-ID:>,SID)
$ETAB
CLUSTER<
MTN050: $DEV (MTN060,<$HELP(<structure name>),$FLAGS(CM%PO)>)
MTN060: $CLUNOD (CONFRM)
>
SINGLE<
MTN050: $DEV (CONFRM,<$HELP(<structure name>),$FLAGS(CM%PO)>)
>
SUBTTL NEXT - NEXT COMMAND
NXTFDB: $NOISE (NXT010,<job on>)
NXT010: $KEYDSP(NXT020)
NXT020: $STAB
ORNDSP(NXT040,BATCH-STREAM,BAT)
ORNDSP(NXT030,CARD-PUNCH,CDP)
ORNDSP(NXT030,PAPER-TAPE-PUNCH,PTP)
ORNDSP(NXT030,PLOTTER,PLT)
ORNDSP(NXT025,PRINTER,LPT)
$ETAB
NXT025: $NOISE (NXT045,<unit number or remote printer type>)
NXT030: $NOISE (NXT050,<unit number>)
NXT040: $NOISE (NXT050,<stream number>)
NXT045: $NUMBER (NXT100,^D10,<number>,<$ACTION(STOBTH),$ALTERNATE(NXT091)>)
NXT050: $NUMBER (NXT080,^D10,<number (/NODE:)>,<$ACTION(STOBTH),>)
NXT080: $SWITCH (NXT090,NXT085,<$DEFAULT(<REQUEST-ID>),$ALTER(NXT100)>)
NXT085: $STAB
ORNSWI(NODE:,NOD)
$ETAB
NXT090: $NODNM (NXT100,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
;REMOTE PRINTERS
NXT091: $KEYDSP(NXT092)
NXT092: $STAB
CLUSTER< ORNDSP (NXT093,CLUSTER,CLU)>
ORNDSP (NXT094,DQS,DQS)
ORNDSP (NXT095,LAT,LAT)
$ETAB
CLUSTER<
NXT093: $CLUSPL(NXT100)
>
NXT094: $DQSSPL(NXT100)
NXT095: $LATSPL(NXT100)
NXT100: $KEYDSP (NXT110,<$DEFAULT(<REQUEST-ID>)>)
NXT110: $STAB
ORNDSP(NXT120,<REQUEST-ID>,RQN)
$ETAB
NXT120: $NUMBER(CONFRM,^D10,<request number of the next job to schedule>,<$ACTION(CHKPOS)>)
SUBTTL PUSH command tables
PUSFDB: $NOISE(PUS100,<to EXEC level>)
PUS100: $CRLF(<$ACTION(PUSHRT##)>)
SUBTTL REPORT command tables
RPTFDB: $NOISE (RPT005,<by>)
RPT005: $FIELD (RPT015,<user name>)
RPT015: $DEV (RPT020,<$HELP(<device being reported>),$FLAGS(CM%PO)>)
RPT020: $CRLF (<$ALTER(RPT025),$ACTION(TXTLIN##),$HELP(<confirm for multiple line response>)>)
RPT025: $CTEXT (CONFRM,<single line response>)
SUBTTL REQUEUE command tables
REQFDB: $NOISE (REQ010,<current job on>)
REQ010: $KEYDSP (REQ020)
REQ020: $STAB
ORNDSP (REQ030,<BATCH-STREAM>,BAT)
ORNDSP (REQ040,<CARD-PUNCH>,CDP)
IFN FTFTS,<
ORNDSP (REQ030,<FTS-STREAM>,FTS)
> ;End FTFTS conditional
ORNDSP (REQ040,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP (REQ040,<PLOTTER>,PLT)
ORNDSP (REQ041,<PRINTER>,LPT)
$ETAB
; Batch tables
;
REQ030: $STREAM (REQ100)
; Output device tables
;
REQ040: $UNIT (REQ050)
REQ041: $NOISE (REQ042,<unit number or remote printer type>)
REQ042: $NUMBER (REQ050,^D10,<unit number>,<$ACTION(CHKVAL),$ALTERNATIVE(REQ044)>)
REQ044: $KEYDSP (REQ045)
REQ045: $STAB
CLUSTER< ORNDSP (REQ046,CLUSTER,CLU)>
ORNDSP (REQ047,DQS,DQS)
ORNDSP (REQ048,LAT,LAT)
$ETAB
CLUSTER<
REQ046: $CLUSPL (REQ050)
>
REQ047: $DQSSPL (REQ050)
REQ048: $LATSPL (REQ050)
REQ050: $KEYDSP (REQ060,<$DEFAULT(CURRENT-POSITION),$ALTER(REQ100)>)
REQ060: $STAB
ORNDSP (REQ070,<BEGINNING-OF>,BEG)
ORNDSP (REQ100,<CURRENT-POSITION>,CUR)
$ETAB
REQ070: $KEY (REQ100,REQ080)
REQ080: $STAB
ORNKEY (<COPY>,CPY)
ORNKEY (<FILE>,FIL)
ORNKEY (<JOB>,JOB)
$ETAB
REQ100: $EXPL (CONFRM,<$ALTER(CONFRM)>)
SUBTTL RESPOND command tables
RSPFDB: $NOISE (RSP001,<to message number>)
RSP001: $NUMBER (RSP005,^D10,<message number>,$ACTION(CHKVAL))
RSP005: $CRLF (<$ALTER(RSP010),$ACTION(TXTLIN##),$HELP(<confirm for multiple line response>)>)
RSP010: $CTEXT (CONFRM,<single line response>)
SUBTTL ROUTE command tables
RTEFDB: $NOISE (RTEF05,device)
RTEF05: $KEYDSP(RTEF10)
RTEF10: $STAB
ORNDSP(RTEF50,<ALL-DEVICES>,ALL)
ORNDSP(RTEF15,<CARD-PUNCH>,CDP)
ORNDSP(RTEF15,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP(RTEF15,<PLOTTER>,PLT)
ORNDSP(RTEF14,<PRINTER>,LPT)
$ETAB
RTEF14: $NOISE (RTEF19,<unit number or remote printer type>)
RTEF15: $NOISE (RTEF20,<unit number>)
RTEF19: $NUMBER (RTEF41,^D10,<source device unit number>,$ALTERN(RTEF24))
RTEF20: $NUMBER (RTEF35,^D10,<source device unit number>,$ALTERN(RTEF25))
RTEF24: $KEYDSP (RTES05,<$ALTERNATE(RTES10)>)
RTEF25: $KEYDSP (RTEF30)
RTEF30: $STAB
ORNDSP (RTEF35,<ALL-UNITS>,ALL)
$ETAB
RTES05: $STAB
ORNDSP (RTEF34,<ALL-UNITS>,ALL)
$ETAB
;REMOTE PRINTERS.
RTES10: $KEYDSP (RTES11)
RTES11: $STAB
CLUSTER< ORNDSP (RTES12,CLUSTER,CLU)>
ORNDSP (RTES13,DQS,DQS)
ORNDSP (RTES14,LAT,LAT)
$ETAB
CLUSTER<
RTES12: $CLUSPL (RTEF41)
>
RTES13: $DQSSPL (RTEF41)
RTES14: $LATSPL (RTEF41)
;To explain the following magical line...
;The default '(' is to allow an ESC to go to the next field and display noise.
;The ERRPDB is used to only get to the next field on switch error or ESC.
;The alternate is to permit entering the destination or crlf
RTEF34: $SWITCH (RTEF38,RTEF36,<$DEFAULT(<(>),$ERRPDB(RTEF40),$ALTER(RTEF44)>)
RTEF35: $SWITCH (RTEF39,RTEF36,<$DEFAULT(<(>),$ERRPDB(RTEF40),$ALTER(RTEF45)>)
RTEF36: $STAB
ORNSWI(NODE:,NOD)
$ETAB
RTEF38: $NODNM (RTEF41,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
RTEF39: $NODNM (RTEF40,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
RTEF40: $NOISE (RTEF45,<to unit number>)
RTEF41: $NOISE (RTEF44,<to unit number or remote printer type>)
RTEF44: $NUMBER (CONFRM,^D10,<destination unit number>,<$ALTERNATE(RTES15)>)
RTEF45: $NUMBER (RTEF48,^D10,<destination unit number>,<$ALTERNATE(RTEF46)>)
RTES15: $KEYDSP (RTEF47,<$ALTERNATE(RTES16)>)
RTEF46: $KEYDSP (RTEF47,<$ALTERNATE(RTEF80)>)
RTEF47: $STAB
ORNDSP (RTEF48,<ALL-UNITS>,ALL)
$ETAB
RTEF48: $NODE (CONFRM)
;REMOTE PRINTERS.
RTES16: $KEYDSP (RTES17,<$ALTERNATIVE(RTEF80)>)
RTES17: $STAB
CLUSTER< ORNDSP (RTES18,CLUSTER,CLU)>
ORNDSP (RTES19,DQS,DQS)
ORNDSP (RTES20,LAT,LAT)
$ETAB
CLUSTER<
RTES18: $CLUSPL (CONFRM)
>
RTES19: $DQSSPL (CONFRM)
RTES20: $LATSPL (CONFRM)
;For parsing all devices
RTEF50: $NOISE (RTEF55,<on node>)
RTEF55: $KEYDSP (RTEF60,<$HELP(<ALL-NODES>),$ALTERNATE(RTEF65)>)
RTEF60: $STAB
ORNDSP (RTEF70,<ALL-NODES>,ALL)
$ETAB
RTEF65: $NODNM (RTEF70,<source node name>,<$FLAGS(CM%PO!CM%NSF)>)
RTEF70: $NOISE (RTEF75,<to node>)
RTEF75: $NODNM (CONFRM,,<$ALTERNATE(RTEF80),$FLAGS(CM%PO!CM%NSF)>)
RTEF80: $CRLF ($HELP(<confirm to delete routing>))
SUBTTL SEND command tables
SNDFDB: $NOISE (SND001,<to>)
SND001: $KEYDSP (SND005)
SND005: $STAB
ORNDSP(SND040,<ALL>,ALL)
ORNDSP(SND015,<BATCH-STREAM>,BAT)
ORNDSP(SND010,<JOB>,JOB)
ORNDSP(SND025,<OPERATOR>,OPR)
ORNDSP(SND020,<TERMINAL>,TRM)
$ETAB
SND010: $NUMBER(SND030,^D10,<job number>,$ACTION(CHKVAL))
SND015: $STNUM(SND025)
SND020: $NUMBER(SND030,^D8,<terminal number>,$ACTION(CHKVAL))
SND025: $NODE(SND030)
SND030: $CRLF (<$ALTER(SND035),$ACTION(TXTLIN##),$HELP(<confirm for multiple line response>)>)
SND035: $CTEXT (CONFRM,<single line response>)
CLUSTER<
SND040: $CLUNOD (SND035,SND035)
>
SINGLE<
SND040: $NODE(SND035)
>
SUBTTL SET command tables
SETFDB: $KEYDSP(SET010)
SET010: $STAB
ORNDSP(SET170,BATCH-STREAM,BAT)
ORNDSP(SET490,<CARD-PUNCH>,CDP)
ORNDSP(SET700,<DISK-DRIVE>,DSK)
ORNDSP(SET070,JOB,JOB)
IFN FTDN60,<
ORNDSP(SETNOD,<NODE>,NOD)
>;END FTDN60
ORNDSP(SET800,<ONLINE>,ONL)
ORNDSP(SET430,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP(SET370,PLOTTER,PLT)
ORNDSP(SETP00,PORT,POR)
ORNDSP(SET200,PRINTER,LPT)
ORNDSP(SETSCH,<SCHEDULER>,SCH)
ORNDSP(SET600,<STRUCTURE>,STR)
ORNDSP(SET630,<TAPE-DRIVE>,TAP)
ORNDSP(SET020,TERMINAL,TRM,CM%INV)
$ETAB
SET020: $KEYDSP(SET030,<$ACTION(SETRTN##)>)
SET030: $STAB
ORNDSP(SET040,<TYPE>,TYP)
$ETAB
SET040: $NOISE (SET050,<to be>)
SET050: $KEY(SET350,SET060,<$ACTION(SETRTN##)>)
SET060: $STAB
DEFINE X(PARNAM,SIXNAM,SUF,EOLSEQ),<
KEYTAB(.TT'SUF,<PARNAM>)
>;END DEFINE X
TRMTYP ;Generate the options
$ETAB
SET070: $NOISE(SET080,<job number>)
SET080: $NUMBER(SET090,^D10,<job number>,$ACTION(CHKVAL))
SET090: $KEYDSP(SET100)
SET100: $STAB
ORNDSP(CONFRM,<NOOPR-INTERVENTION>,NOI)
ORNDSP(CONFRM,<OPR-INTERVENTION>,OIA)
ORNDSP(SET110,SCHEDULER-CLASS,CLS)
$ETAB
SET110: $NOISE(SET120,<to be>)
SET120: $NUMBER(CONFRM,^D10,<scheduler class to put the job in>)
SET170: $SRANGE(SET180)
SET180: $KEYDSP(SET250)
SET200: $NOISE (SET201,<unit number or remote printer type>)
SET201: $ORANGE (SET210,<number or range (n:m)>,<$ALTERNATE(<SET203>)>)
;REMOTE PRINTERS
SET203: $KEYDSP (SET204)
SET204: $STAB
CLUSTER< ORNDSP (SET205,CLUSTER,CLU)>
ORNDSP (SET206,DQS,DQS)
ORNDSP (SET207,LAT,LAT)
$ETAB
CLUSTER<
SET205: $CLUSPL (SET209)
>
SET206: $DQSSPL (SET209)
SET207: $LATSPL (SET208)
SET208: $KEYDSP(SET308) ;EXCLUDE DESTINATION
SET209: $KEYDSP(SET305) ;EXCLUDE FORMS-TYPE, DESTINATION
SET210: $KEYDSP(SET300)
SET250: $STAB
ORNDSP(SET295,ATTRIBUTE,ATR)
ORNDSP(CONFRM,NOOPR-INTERVENTION,NOI)
ORNDSP(CONFRM,OPR-INTERVENTION,OIA)
ORNDSP(SET260,PRIORITY-LIMITS,PRL)
ORNDSP(SET270,TIME-LIMITS,TIM)
$ETAB
SET260: $RANGE(CONFRM,<maximum priority limit or a range (1-63)>)
SET270: $RANGE(CONFRM,<maximum time limits in minutes or a range>)
SET280: $NUMBER(CONFRM,^D10,<line number>,$ACTION(CHKVAL))
;GET MEMORY LIMITS
SET295: $KEYDSP(SET297)
SET297: $STAB
ORNDSP(CONFRM,BATCON,BAT)
ORNDSP(CONFRM,SITGO,SIT)
$ETAB
SET300: $STAB
ORNDSP(SET790,DESTINATION,DST)
ORNDSP(SET330,FORMS-TYPE,FOT)
ORNDSP(SET340,LIMIT-EXCEEDED-ACTION,LEA)
ORNDSP(SET310,PAGE-LIMITS,PGL)
ORNDSP(SET260,PRIORITY-LIMITS,PRL)
$ETAB
SET305: $STAB
ORNDSP(SET340,LIMIT-EXCEEDED-ACTION,LEA)
ORNDSP(SET310,PAGE-LIMITS,PGL)
ORNDSP(SET260,PRIORITY-LIMITS,PRL)
$ETAB
SET308: $STAB
ORNDSP(SET330,FORMS-TYPE,FOT)
ORNDSP(SET340,LIMIT-EXCEEDED-ACTION,LEA)
ORNDSP(SET310,PAGE-LIMITS,PGL)
ORNDSP(SET260,PRIORITY-LIMITS,PRL)
$ETAB
SET310: $RANGE(CONFRM,<maximum number of pages or a range>)
SET320: $STAB
ORNKEY(ABORT,CNC)
ORNKEY(ASK,ASK)
ORNKEY(PROCEED,IGN)
$ETAB
SET330: $FIELD(CONFRM,<forms name>)
SET340: $KEY(CONFRM,SET320)
SET350: $CRLF(<$ACTION(SETTRM##)>)
SET370: $URANGE (SET380)
SET380: $KEYDSP (SET390)
SET390: $STAB
ORNDSP (SET330,<FORMS-TYPE>,FOT)
ORNDSP (SET340,LIMIT-EXCEEDED-ACTION,LEA)
ORNDSP (SET480,<OUTPUT-LIMIT>,OPL)
ORNDSP (SET260,PRIORITY-LIMITS,PRL)
$ETAB
SET430: $URANGE (SET440)
SET440: $KEYDSP (SET450)
SET450: $STAB
ORNDSP (SET330,<FORMS-TYPE>,FOT)
ORNDSP (SET340,LIMIT-EXCEEDED-ACTION,LEA)
ORNDSP (SET470,<OUTPUT-LIMIT>,OPL)
ORNDSP (SET260,PRIORITY-LIMITS,PRL)
$ETAB
SET470: $RANGE(CONFRM,<maximum limit in feet or a range>)
SET480: $RANGE(CONFRM,<maximum limit in minutes or a range>)
SET490: $URANGE(SET500)
SET500: $KEYDSP (SET510)
SET510: $STAB
ORNDSP (SET790,<DESTINATION>,DST)
ORNDSP (SET330,<FORMS-TYPE>,FOT)
ORNDSP (SET340,LIMIT-EXCEEDED-ACTION,LEA)
ORNDSP (SET530,<OUTPUT-LIMIT>,OPL)
ORNDSP (SET260,PRIORITY-LIMITS,PRL)
$ETAB
SET530: $RANGE(CONFRM,<maximum limit in cards or a range>)
SUBTTL SET STRUCTURE command tables
SET600: $DEV (SET610,<$HELP(<structure name>),$FLAGS(CM%PO!CM%NSF)>)
SET610: $KEYDSP(SET620)
SET620: $STAB
ORNDSP(SET622,<ACKNOWLEDGED>,ACK)
ORNDSP(SET624,<AVAILABLE>,AVA)
ORNDSP(CONFRM,<DOMESTIC>,DOM)
ORNDSP(SET625,<DUMPABLE>,DUM)
ORNDSP(CONFRM,<EXCLUSIVE>,EXL)
ORNDSP(CONFRM,<FOREIGN>,FOR)
ORNDSP(SET622,<IGNORED>,IGN)
ORNDSP(SET626,<NONDUMPABLE>,NDM)
ORNDSP(CONFRM,<REGULATED>,REG)
ORNDSP(CONFRM,<SHARED>,SHR)
ORNDSP(SET624,<UNAVAILABLE>,UAV)
ORNDSP(CONFRM,<UNREGULATED>,URG)
$ETAB
SET622: $NOISE(CONFRM,<as a new mountable structure>)
SET624: $NOISE(CONFRM,<to new users>)
SET625: $NOISE(CONFRM,<as a dumpable structure>)
SET626: $NOISE(CONFRM,<as a nondumpable structure>)
SUBTTL SET TAPE command tables
SET630: $DEV(SET640,<$HELP(<tape drive name>)>)
SET640: $KEYDSP(SET650,<$ACTION(SET655)>)
SET650: $STAB
ORNDSP(SET660,<AVAILABLE>,AVA)
ORNDSP(SETINI,<INITIALIZE>,INI)
ORNDSP(SET670,<UNAVAILABLE>,UAV)
$ETAB
$DATA VOLIDF,1 ;Volume id flag (used for INITIALIZE)
;if 0 then switch not used
;if -1 then switch used
;if 1 then switch needed (ANSI labels)
SET655: SETZM VOLIDF ;Initialize volid flag
$RETT
SET660: $NOISE(CONFRM,<for use by system>)
SET670: $CRLF (<$ALTER(SET680),$ACTION(TXTLIN##),$HELP(<confirm for multiple line explanation for drive unavailable>)>)
SET680: $CTEXT (CONFRM,<single line response>)
SUBTTL SET DISK command tables
SET700: $NOISE(SET705,<on>)
SET705: $KEY(SET720,SET710,<$DEFAULT(<CHANNEL>)>)
SET710: $STAB
ORNKEY(<CHANNEL>,CHN)
$ETAB
SET720: $NUMBER(SET722,^D10,<channel number>,<$ACTION(CHKCHN)>)
SET722: $KEYDSP(SET724,<$DEFAULT(<DRIVE>)>)
SET724: $STAB
ORNDSP(SET726,<CONTROLLER>,CON)
ORNDSP(SET750,<DRIVE>,DRV)
$ETAB
SET726: $NUMBER(SET730,^D10,<controller number or -1 if none>)
SET730: $KEY(SET750,SET740,<$DEFAULT(<DRIVE>)>)
SET740: $STAB
ORNKEY(<DRIVE>,DRV)
$ETAB
SET750:$NUMBER(SET760,^D10,<drive number>,<$ACTION(CHKVAL)>)
SET760: $KEYDSP(SET770)
SET770: $STAB
ORNDSP(SET660,<AVAILABLE>,AVA)
ORNDSP(SET670,<UNAVAILABLE>,UAV)
$ETAB
SET790: $NOISE(SET792,<to be>)
SET792: SNADST (CONFRM)
SUBTTL SET ONLINE command tables
SET800: $NOISE(SET810,<device address>)
SET810: $NUMBER(SET820,<^D8>,<channel number>,<$ACTION(CHKCHN)>)
SET820: $COMMA(SET830)
SET830: $NUMBER(SET840,<^D8>,<device unit number>,<$ACTION(CHKVAL)>)
SET840: $COMMA(SET850,<$ALTERNATE(<CONFRM>)>)
SET850: $NUMBER(SET860,<^D8>,<controller number or -1 if no controller number>,<$DEFAULT(<-1>)>)
SET860: $NOISE(SET865,<alternate address>)
SET865: $NUMBER(SET870,<^D8>,<alternate channel>,<$ACTION(CHKCHN),$ALTERNATE(CONFRM)>)
SET870: $COMMA(SET875)
SET875: $NUMBER(SET880,<^D8>,<alternate device unit number>,<$ACTION(CHKVAL)>)
SET880: $COMMA(SET885,<$ALTERNATE(<CONFRM>)>)
SET885: $NUMBER(CONFRM,<^D8>,<alternate controller number or -1>,<$DEFAULT(<-1>)>)
CHKCHN: SKIPL S1,CR.RES(S2) ;CHECK THAT NUMBER
CAILE S1,7 ;IN BOUNDS
SKIPA ;BAD NUMBER
$RETT ;IT'S GOOD
PUSHJ P,FIXIT
MOVEI S2,[ASCIZ/channel number not in range 0:7/]
$RETF
SUBTTL SET TAPE INITIALIZE command tables
SETINI: $SWITCH(,INI010,<$ACTION(SHRSWT),$ALTERNATE(INI250)>)
INI010: $STAB
ORNSDP(INI140,<COUNT:>,CNT)
ORNSDP(INI020,<DENSITY:>,DEN)
ORNSDP(INI240,<INCREMENT:>,INC)
ORNSDP(INI040,<LABEL-TYPE:>,LBT)
ORNSDP(INI060,<OVERRIDE-EXPIRATION:>,OVR)
ORNSDP(INI080,<OWNER:>,OWN)
ORNSDP(INI100,<PROTECTION:>,PRO)
ORNSDP(INI120,<TAPE-DISPOSITION:>,TDP)
ORNSDP(INI170,<VOLUME-ID:>,VID)
$ETAB
INI020: $KEY(NEXT(SETINI),INI030,<$DEFAULT(<1600>)>)
INI030: $STAB
ORNKEY(1600,160)
ORNKEY(200,200)
ORNKEY(556,556)
ORNKEY(6250,625)
ORNKEY(800,800)
$ETAB
INI040: $KEY(NEXT(SETINI),INI050,<$ACTION(INI057),$DEFAULT(<ANSI>)>)
INI050: $STAB
ORNKEY(ANSI,ANS)
ORNKEY(EBCDIC,EBC)
ORNKEY(TOPS-20,T20)
INI055: ORNKEY(UNLABELED,UNL)
$ETAB
INI057: MOVE S1,CR.RES(S2) ;Get the result from the key table
CAIE S1,INI055 ;Was the label type unlabeled?
SKIPE VOLIDF ;No - skip if still need volume id
$RETT ;No further action needed
MOVEI S1,1
MOVEM S1,VOLIDF ;Set that we need volid to be specified
$RETT
INI060: $KEY(NEXT(SETINI),INI070,<$DEFAULT(<NO>)>)
INI070: $STAB
ORNKEY(NO,NO)
ORNKEY(YES,YES)
$ETAB
INI080: $USER(NEXT(SETINI),<$HELP(<user who owns the tape>)>)
INI100: $NUMBER(NEXT(SETINI),^D8,<protection for the tape as an octal number>)
INI120: $KEY(NEXT(SETINI),INI130,<$DEFAULT(<UNLOAD>)>)
INI130: $STAB
ORNKEY(HOLD,HLD)
ORNKEY(UNLOAD,UNL)
$ETAB
INI140: $NUMBER(NEXT(SETINI),^D10,<number of volumes to be initialized>,<$ACTION(CHKPOS),$DEFAULT(<10>)>)
INI170: $FIELD(NEXT(SETINI),<volume-id without quotes>,<$PREFILL(INI175)>)
INI175: SETOM VOLIDF ;Say we saw volume id
$RETT
INI240: $NUMBER(NEXT(INI200),^D10,<increment value for assigning next volume-id>,<$ACTION(CHKPOS),$DEFAULT(<1>)>)
INI250: $CRLF ($ACTION(INI260))
INI260: SKIPG VOLIDF ;Is it not needed or not used?
$RETT ;Yes
MOVEI S2,[ASCIZ/Volid must be specified/]
$RETF
INI300: $CRLF (<$HELP(<confirm to abort tape initialization>)>)
SUBTTL SET NODE command tables
IFN FTDN60,<
SETNOD: $NODNM(SETN10,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
SETN10: $KEYDSP(SETN12,<$ALTERNATE(SETN20)>)
SETN12: $STAB
ORNDSP(SETN95,<BYTES-PER-MESSAGE>,BPM)
ORNDSP(SETN40,<CLEAR-SEND-DELAY>,CSD)
ORNDSP(SETN60,<RECORDS-PER-MESSAGE>,RPM)
ORNDSP(SETN80,<TIMEOUT-CATEGORY>,TOU)
ORNDSP(SETN90,<TRANSPARENCY>,TRA)
$ETAB
SETN20: $KEYDSP(SETN22)
SETN22: $STAB
ORNDSP(SETN31,<APPLICATION>,PLU)
ORNDSP(SETN35,<CHARACTER-SET>,CHS)
ORNDSP(SETN32,<CIRCUIT>,CIR)
ORNDSP(SETN33,<DATA>,DAT)
ORNDSP(SETN34,<LOGON-MODE>,LOM)
$ETAB
SETN31: $CTEXT(CONFRM,<IBM application>)
SETN32: $CTEXT(CONFRM,<circuit-ID>)
SETN33: $CTEXT(CONFRM,<IBM logon data>)
SETN34: $CTEXT(CONFRM,<IBM logon mode>)
SETN35:$IFILE(CONFRM,<Translation table file>)
SETN40: $NUMBER(CONFRM,^D10,<time in jiffies>,<$ACTION(CHKVAL)>)
SETN50: $KEY(CONFRM,SETN55,<$DEFAULT(<ON>)>)
SETN55: $STAB
ORNKEY(<OFF>,OFF)
ORNKEY(<ON>,ON)
$ETAB
SETN60: $NUMBER(CONFRM,^D10,<records per message for 2780>,<$ACTION(CHKVAL)>)
SETN80: $KEY(CONFRM,SETN85)
SETN85: $STAB
ORNKEY(<PRIMARY>,PRI)
ORNKEY(<SECONDARY>,SEC)
$ETAB
SETN90: $KEY(CONFRM,SETN55)
SETN95: $NUMBER(CONFRM,^D10,<bytes per message size for the front end>)
>;END FTDN60
SUBTTL SET SCHEDULER command tables
SETSCH: $KEYDSP(SETS10,<$DEFAULT(<BIAS-CONTROL>)>)
SETS10: $STAB
ORNDSP(SETS50,<BATCH-CLASS>,BAT)
ORNDSP(SETS20,<BIAS-CONTROL>,BIA)
ORNDSP(SETS40,<CLASS>,CLS)
$ETAB
SETS20: $NOISE(SETS30,<to>)
SETS30: $NUMBER(CONFRM,^D10,<<decimal number, a small number to favor interactive processes, larger number for compute-bound>>,<$ACTION(CHKVAL)>)
SETS40: $NOISE(SETS42,<number>)
SETS42: $NUMBER(SETS44,^D10,<scheduler class number>,<$ACTION(CHKVAL)>)
SETS44: $NOISE(SETS46,<to percent>)
SETS46: $NUMBER(CONFRM,^D10,<percent for this scheduler class (0-99)>,<$ACTION(CHKPER)>)
SETS50: $KEY(CONFRM,SETS52,<$ALTERNATE(SETS54)>)
SETS52: $STAB
ORNKEY(<BACKGROUND>,BCK)
ORNKEY(<NONE>,NON)
$ETAB
SETS54: $NUMBER(CONFRM,^D10,<scheduler class for batch>,<$ACTION(CHKVAL)>)
CHKPER: SKIPL T1,CR.RES(S2) ;CHECK THAT NUMBER
CAILE T1,^D100 ;TOO LARGE
SKIPA
$RETT ;RETURN
PUSHJ P,FIXIT
MOVEI S2,[ASCIZ/scheduler percent out of range/]
$RETF
SUBTTL SET PORT command tables
SETP00: $KEY(SETP20,SETP10,<$DEFAULT(<CI>)>)
SETP10: $STAB
ORNKEY(<CI>,CI)
ORNKEY(<NI>,NI)
$ETAB
SETP20: $KEY(CONFRM,SETP30)
SETP30: $STAB
ORNKEY(<AVAILABLE>,AVA)
ORNKEY(<UNAVAILABLE>,UAV)
$ETAB
SUBTTL SHOW command tables
SHWFDB: $KEYDSP(SHW010)
SHW010: $STAB
CLUSTER<ORNDSP(SHWC00,<CLUSTER-GALAXY-LINK-STATUS>,CGL)>
ORNDSP(SHW500,CONFIGURATION,CFG)
ORNDSP(SHW110,<CONTROL-FILE>,CTL)
ORNDSP(SHW020,MESSAGES,MSG)
ORNDSP(SHW030,OPERATORS,OPR)
ORNDSP(SHW210,PARAMETERS,PRM)
ORNDSP(SHW400,QUEUES,QUE)
CLUSTER<
ORNDSP(SHW350,<ROUTE-TABLE>,RTE)
ORNDSP(SHW350,SCHEDULER,SCH)
>
SINGLE<
ORNDSP(CONFRM,<ROUTE-TABLE>,RTE)
ORNDSP(CONFRM,SCHEDULER,SCH)
>
ORNDSP(STS000,STATUS,STS)
ORNDSP(SHW060,TIME,DAY) ;DAYTIME CHANGES TO TIME
$ETAB
SHWC00: $SWITCH(SHWC15,SHWC10,<$ALTER(SHWC20)>)
SHWC10: $STAB
ORNSWI (<NODE:>,NOD)
$ETAB
SHWC15: $NODNM(SHWC20,<node name>,<$FLAGS(CM%PO!CM%NSF),$ACTION(CHKNOD)>)
SHWC20: $CLUNOD(CONFRM)
CLUSTER<
SHW020: $NUMBER(SHW040,^D10,<message number>,<$ALTER(SHW030),$ACTION(CHKVAL)>)
>
SINGLE<
SHW020: $NUMBER(CONFRM,^D10,<message number>,<$ALTER(SHW030),$ACTION(CHKVAL)>)
>
CLUSTER<
SHW030: $NODE(SHW040)
SHW040: $CLUNOD(CONFRM)
>
SINGLE<
SHW030: $NODE(CONFRM)
>
SHW060: $CRLF(<$ACTION(SHWDAY##)>)
SHW110: $NOISE (SHW120,<for>)
SHW120: $KEY (SHW140,SHW130,<$DEFAULT(<BATCH-STREAM>)>)
SHW130: $STAB
ORNKEY(<BATCH-STREAM>,BAT)
$ETAB
SHW140: $NOISE (SHW145,<stream number>)
SHW145: $NUMBER (SHW150,^D10,<stream number>,$ACTION(CHKVAL))
SHW150: $SWITCHES(,SHW160,<$ALTER(CONFRM)>)
SHW160: $STAB
ORNSDP (SHW170,<LINES:>,LNS)
$ETAB
SHW170: $NUMBER (CONFRM,^D10,<number of lines>,$ACTION(CHKVAL))
SHW210: $KEYDSP(SHW220,<$ALTER(SHW320)>)
SHW220: $STAB
ORNDSP (SHW230,<BATCH-STREAM>,BAT)
ORNDSP (SHW230,<CARD-PUNCH>,CDP)
IFN FTFTS,<
ORNDSP (SHW230,<FAL-STREAM>,FAL)
ORNDSP (SHW230,<FTS-STREAM>,FTS)
> ;End FTFTS conditional
ORNDSP (SHWNOD,<NETWORK-NODE>,NOD)
ORNDSP (SHW230,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP (SHW230,<PLOTTER>,PLT)
ORNDSP (SHW272,<PRINTER>,LPT)
$ETAB
SHW230: $SWITCH(SHW260,SHW250,<$ALTERNATE(SHW270)>)
SHW250: $STAB
ORNSWI(<NODE:>,NOD)
$ETAB
CLUSTER<
SHW260: $NODNM(SHW350,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
SHW270: $RANGE(SHW280,<number or range (n:m)(/NODE:)>,<$ALTERNATE(SHW350)>)
>
SINGLE<
SHW260: $NODNM(CONFRM,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
SHW270: $RANGE(SHW280,<number or range (n:m)(/NODE:)>,<$ALTERNATE(CONFRM)>)
>
;PRINTERS
CLUSTER<
SHW272: $KEYDSP (SHW273,<$ALTERNATIVE(SHW350)>)
>
SINGLE<
SHW272: $KEYDSP (SHW273,<$ALTERNATIVE(CONFRM)>)
>
SHW273: $STAB
CLUSTER< ORNDSP (SHW274,CLUSTER,CLU)>
ORNDSP (SHW275,DQS,DQS)
ORNDSP (SHW276,LAT,LAT)
ORNDSP (SHW277,LOCAL,LOC)
$ETAB
CLUSTER<
SHW274: $CLUSPL (SHW350,SHW350)
SHW275: $DQSSPL (SHW350,SHW350)
SHW276: $LATSPL (SHW350,SHW350)
SHW277: $RANGE(SHW350,<number or range (n:m)>,<$ALTERNATE(CONFRM)>)
SHW280: $NODE(SHW350)
SHW320: $SWITCH(SHW340,SHW330,<$ALTERNATE(SHW350)>)
SHW330: $STAB
ORNSWI(<NODE:>,NOD)
$ETAB
SHW340: $NODNM(SHW350,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
SHW350: $CLUNOD (CONFRM)
>
SINGLE<
SHW275: $DQSSPL (CONFRM,CONFRM)
SHW276: $LATSPL (CONFRM,CONFRM)
SHW277: $RANGE(CONFRM,<number or range (n:m)>,<$ALTERNATE(CONFRM)>)
SHW280: $NODE(CONFRM)
SHW320: $SWITCH(SHW340,SHW330,<$ALTERNATE(CONFRM)>)
SHW330: $STAB
ORNSWI(<NODE:>,NOD)
$ETAB
SHW340: $NODNM(CONFRM,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
>
; Continued on next page
;Continued from previous page
; SHOW CONFIGURATION command
SHW500: $NOISE(SHW510,<of>)
SHW510: $KEYDSP(SHW520)
SHW520: $STAB
ORNDSP(SHW530,<DISK-DRIVE>,DSK)
$ETAB
CLUSTER<
SHW530: $SWITCH(SHW550,SHW540,<$ALTERNATE(SHW550)>)
>
SINGLE<
SHW530: $SWITCH(CONFRM,SHW540,<$ALTERNATE(CONFRM)>)
>
SHW540: $STAB
ORNSWI(ALL,ALL)
ORNSWI(FREE,AVA)
ORNSWI(MOUNTED,MNT)
$ETAB
CLUSTER<
SHW550: $CLUNOD (CONFRM)
>
; Continued on next page
;Continued from previous page
; SHOW QUEUE command
SHW400: $KEYDSP(SHW420,<$DEFAULT(ALL),$ALTER(SHW430)>);NODE OR CONFIRM
SHW420: $STAB
ORNDSP (SHW430,<ALL-JOBS>,ALL)
ORNDSP (SHW430,<BATCH-JOBS>,BAT)
ORNDSP (SHW430,<CARD-PUNCH-JOBS>,CDP)
IFN FTFTS,<
ORNDSP (SHW430,<FTS-REQUEST>,FTS)
> ;End FTFTS conditional
ORNDSP (SHW470,<MOUNT-REQUESTS>,MNT)
ORNDSP (SHW430,<PAPER-TAPE-PUNCH-JOBS>,PTP)
ORNDSP (SHW430,<PLOTTER-JOBS>,PLT)
ORNDSP (SHW430,<PRINTER-JOBS>,LPT)
ORNDSP (SHW470,<RETRIEVAL-REQUESTS>,RET)
$ETAB
CLUSTER<
SHW430: $SWITCH (,SHW440,<$ALTER(SHW600),$ACTION(SHRSWT)>) ;Switch or confirm
>
SINGLE<
SHW430: $SWITCH (,SHW440,<$ALTER(CONFRM),$ACTION(SHRSWT)>) ;Switch or confirm
>
SHW440: $STAB
ORNSDP (NEXT,<ALL>,ALL)
ORNSDP (SHW450,<NODE:>,NOD)
ORNSDP (NEXT,<SHORT>,SHT)
ORNSDP (SHW460,<USER:>,USR)
$ETAB
SHW450: $NODNM (NEXT,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
SHW460: $USER (NEXT)
SHW470: $SWITCH (,SHW480,<$ALTER(SHW600),$ACTION(SHRSWT)>) ;Switch or confirm
SHW480: $STAB ; But no node allowed!
ORNSDP (NEXT,<ALL>,ALL)
ORNSDP (NEXT,<SHORT>,SHT)
ORNSDP (SHW490,<USER:>,USR)
$ETAB
SHW490: $USER (NEXT)
SHW600: $CLUNOD (CONFRM)
SUBTTL SHOW STATUS command tables
STS000: $KEYDSP(STS010,<$ALTER(STS100)>)
STS010: $STAB
ORNDSP (STS020,<BATCH-STREAM>,BAT)
ORNDSP (STS020,<CARD-PUNCH>,CDP)
ORNDSP (STS190,<DISK-DRIVE>,DSK)
IFN FTFTS,<
ORNDSP (STS020,<FAL-STEAM>,FAL)
ORNDSP (STS020,<FTS-STREAM>,FTS)
> ;End FTFTS conditional
ORNDSP (SHWNOD,<NETWORK-NODE>,NOD)
ORNDSP (STS020,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP (STS020,<PLOTTER>,PLT)
ORNDSP (STS121,<PRINTER>,LPT)
ORNDSP (STS020,<READER>,RDR)
ORNDSP (STS250,<STRUCTURE>,STR)
ORNDSP (STS150,<TAPE-DRIVE>,TAP)
$ETAB
STS020: $SWITCH(STS040,STS030,<$ALTERNATE(STS050)>)
STS030: $STAB
ORNSWI(<NODE:>,NOD)
$ETAB
STS040: $NODNM(STS130,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
STS050: $RANGE(STS060,<number or range (n:m)(/NODE:)>,<$ALTERNATE(STS130)>)
STS060: $NODE(STS130)
STS100: $SWITCH(STS120,STS110,<$ALTERNATE(STS130)>)
STS110: $STAB
ORNSWI(<NODE:>,NOD)
$ETAB
STS120: $NODNM(STS130,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
STS121: $KEYDSP (STS122,<$ALTERNATE(<STS127>)>)
STS122: $STAB
CLUSTER< ORNDSP(STS123,CLUSTER,CLU)>
ORNDSP(STS124,DQS,DQS)
ORNDSP(STS125,LAT,LAT)
ORNDSP(STS126,LOCAL,LOC)
$ETAB
CLUSTER<
STS123: $CLUSPL (STS130,STS130)
>
STS124: $DQSSPL (STS130,STS130)
STS125: $LATSPL (STS130,STS130)
STS126: $RANGE(STS130,<number or range (n:m)>,<$ALTERNATE(STS130)>)
STS127: $SWITCH(STS129,STS128,<$ALTERNATE(STS130)>)
STS128: $STAB
ORNSWI(<NODE:>,NOD)
$ETAB
STS129: $NODNM(STS130,<node or server name>,<$FLAGS(CM%PO!CM%NSF)>)
CLUSTER<
STS130: $SWITCH(STS300,STS140,<$ALTERNATE(STS300)>)
>
SINGLE<
STS130: $SWITCH(CONFRM,STS140,<$ALTERNATE(CONFRM)>)
>
STS140: $STAB
ORNSWI(SHORT,SHT)
$ETAB
STS150: $DEV(STS170,<$HELP(<tape drive name>),$ALTERNATE(STS170)>)
CLUSTER<
STS170: $SWITCH(STS300,STS180,<$ALTERNATE(STS300)>)
>
SINGLE<
STS170: $SWITCH(CONFRM,STS180,<$ALTERNATE(CONFRM)>)
>
STS180: $STAB
ORNSWI(ALL,ALL)
ORNSWI(CHARACTERISTICS,CHR)
ORNSWI(FREE,FRE)
$ETAB
CLUSTER<
STS190: $SWITCH(STS300,STS200,<$ALTERNATE(STS300)>)
>
SINGLE<
STS190: $SWITCH(CONFRM,STS200,<$ALTERNATE(CONFRM)>)
>
STS200: $STAB
ORNSWI(ALL,ALL)
ORNSWI(FREE,AVA)
ORNSWI(MOUNTED,MNT)
$ETAB
CLUSTER<
STS250: $SWITCH(STS300,STS270,<$ALTERNATE(STS280)>)
>
SINGLE<
STS250: $SWITCH(CONFRM,STS270,<$ALTERNATE(STS280)>)
>
STS270: $STAB
ORNSWI(ALL,ALL)
ORNSWI(MOUNTED,MNT)
ORNSWI(UNMOUNTED,AVA)
$ETAB
CLUSTER <
STS280: $DEV(STS300,<$HELP(<structure name>),$ALTERNATE(STS300),$FLAGS(CM%PO)>)
STS300: $CLUNOD (CONFRM)
>
SINGLE <
STS280: $DEV(CONFRM,<$HELP(<structure name>),$ALTERNATE(CONFRM),$FLAGS(CM%PO)>)
>
SUBTTL SHWNOD SHOW STATUS/PARAMETERS FOR NODE
CLUSTER<
SHWNOD: $NODNM(SHWN10,<node name>,<$FLAGS(CM%PO!CM%NSF),$ALTERNATIVE(SHWN10)>)
SHWN10: $CLUNOD (CONFRM)
>
SINGLE<
SHWNOD: $CRLF (<$ALTERNATE(SHWN01)>)
SHWN01: $NODNM(CONFRM,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
>
SUBTTL START command tables
STAFDB: $NOISE (STAF01,<object>)
STAF01: $KEYDSP(STAF02)
STAF02: $STAB
ORNDSP(STAF03,BATCH-STREAM,BAT)
ORNDSP(STAF04,<CARD-PUNCH>,CDP)
IFN FTFTS,<
ORNDSP(STAF03,<FAL-STREAM>,FAL)
ORNDSP(STAF03,<FTS-STREAM>,FTS)
> ;End FTFTS conditional
ORNDSP(SHD030,<NODE>,NOD)
ORNDSP(STAF04,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP(STAF04,<PLOTTER>,PLT)
ORNDSP(STAF11,PRINTER,LPT)
ORNDSP(STAF04,READER,RDR)
$ETAB
STAF03: $SRANGE(CONFRM)
SHD030: $NODNM(CONFRM,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
STAF04: $URANGE (CONFRM)
STAF11: $NOISE (STAF12,<unit number or remote printer type>)
STAF12: $ORANGE (STAF14,<number or range (n:m)>,<$ALTERNATE(<STAF17>)>)
STAF14: $SWITCH (STAF26,STAF25,<$ALTERNATE(<CONFRM>)>)
STAF25: $STAB
ORNSWI (<DEVICE:>,DEV)
$ETAB
STAF26: $DEV (STAF27,<$HELP(<tape drive name or terminal line number>)>,<$ALTERNATE(<CONFRM>)>)
STAF27: $SWITCH (STAF29,STAF28,<$ALTERNATE(<CONFRM>)>)
STAF28: $STAB
ORNSWI (<TERMINAL-CHARACTERISTIC:>,TTC)
$ETAB
STAF29: $FIELD (CONFRM,<Terminal characteristic name>,<$ALTERNATE(<CONFRM>)>)
;REMOTE PRINTERS
STAF17: $KEYDSP (STAF18)
STAF18: $STAB
CLUSTER< ORNDSP (STAF19,CLUSTER,CLU)>
ORNDSP (STAF20,DQS,DQS)
ORNDSP (STAF21,LAT,LAT)
$ETAB
CLUSTER<
STAF19: $CLUSPL (CONFRM)
>
STAF20: $DQSSPL (CONFRM)
STAF21: $LATSPL (STAF22)
STAF22: $SWITCH (STAF24,STAF23,<$ALTERNATE(<CONFRM>)>)
STAF23: $STAB
ORNSWI (<TERMINAL-CHARACTERISTIC:>,TTC)
$ETAB
STAF24: $FIELD (CONFRM,<Terminal characteristic>,<$ALTERNATE(<CONFRM>)>)
SUBTTL STOP command tables
STPFDB: $NOISE (STPF01,<object>)
STPF01: $KEYDSP(STPF02)
STPF02: $STAB
ORNDSP(STPS01,BATCH-STREAM,BAT)
ORNDSP(STPU01,<CARD-PUNCH>,CDP)
IFN FTFTS,<
ORNDSP(STPU01,<FTS-STREAM>,FTS)
> ;End FTFTS conditional
ORNDSP(STPU01,<PAPER-TAPE-PUNCH>,PTP)
ORNDSP(STPU01,<PLOTTER>,PLT)
ORNDSP(STP050,PRINTER,LPT)
ORNDSP(STPU01,READER,RDR)
$ETAB
STPS01: $NOISE (STPN01,<stream number>)
STPU01: $NOISE (STPN01,<unit number>)
STPN01: $NUMBER (STPN02,^D10,<number or range (n:m)(/NODE:)>,<$ACTION(STOBTH)>)
STPN02: $TOKEN (STPN03,<:>,<$HELP(<colon to specify a range>),$DEFAULT(IMMEDIATELY),$ALTERNATE(STPN04)>)
STPN03: $NUMBER (STPN04,^D10,,<$ACTION(STOHGH)>)
STPN04: $SWITCH (STPN06,STPN05,<$ALTERNATE(STP070)>)
STPN05: $STAB
ORNSWI(NODE:,NOD)
$ETAB
STPN06: $NODNM (STP070,<node name>,<$FLAGS(CM%PO!CM%NSF)>)
STP050: $NOISE (STP051,<unit number or remote printer type>)
STP051: $NUMBER (STP052,^D10,<number or range (n:m)>,<$ACTION(STOBTH),$ALTERNATE(STP057)>)
STP052: $TOKEN (STP053,<:>,<$HELP(<colon to specify a range>),$DEFAULT(IMMEDIATELY),$ALTERNATE(STP070)>)
STP053: $NUMBER (STP070,^D10,,<$ACTION(STOHGH)>)
;REMOTE PRINTERS
STP057: $KEYDSP (STP058)
STP058: $STAB
CLUSTER< ORNDSP (STP059,CLUSTER,CLU)>
ORNDSP (STP060,DQS,DQS)
ORNDSP (STP061,LAT,LAT)
$ETAB
CLUSTER<
STP059: $CLUSPL (STP070)
>
STP060: $DQSSPL (STP070)
STP061: $LATSPL (STP070)
STP070: $KEYDSP (STP080,<$DEFAULT(<IMMEDIATELY>),$ALTERNATE(CONFRM)>)
STP080: $STAB
ORNDSP(STP090,<AFTER>,AFT)
ORNDSP(CONFRM,<IMMEDIATELY>,IMM)
$ETAB
STP090: $KEY(CONFRM,STP100)
STP100: $STAB
ORNKEY(<CURRENT-REQUEST>,ACR)
ORNKEY(<EVERY-REQUEST>,AER)
$ETAB
SUBTTL SUPPRESS command tables
SUPFDB: $NOISE (SUP001,<carriage control on>)
SUP001: $KEY (SUP010,SUP005,<$DEFAULT(<PRINTER>)>)
SUP005: $STAB
ORNKEY (<PRINTER>,LPT)
$ETAB
SUP010: $NOISE (SUP015,<unit number or remote printer type>)
SUP015: $NUMBER (SUP040,^D10,<unit number>,<$ACTION(CHKVAL),$ALTERNATE(SUP025)>)
SUP025: $KEYDSP (SUP030)
SUP030: $STAB
ORNDSP (SUP035,LAT,LAT)
$ETAB
SUP035: $LATSPL (SUP040)
SUP040: $SWITCH(CONFRM,SUP045,<$DEFAULT(</JOB>),$ALTER(CONFRM)>)
SUP045: $STAB
ORNSWI(FILE,FIL)
ORNSWI(JOB,JOB)
ORNSWI(STOP,STP)
$ETAB
SUBTTL SWITCH command tables
SWIFDB: $NOISE(SWI010,<request number>)
SWI010: $NUMBER(SWI020,^D10,<request number of the mount request to switch>)
SWI020: $NOISE(SWI030,<to new volume>)
SWI030: $QUOTE(SWI050,<volume-id in quotes if has non-alphanumeric characters>,<$ALTERNATE(SWI040)>)
SWI040: $FIELD(SWI050,<volume-id without quotes>)
SWI050: $NOISE(SWI060,<on drive>)
SWI060: $DEV(CONFRM,<$HELP(<tape drive to switch request to>),$ALTERNATE(CONFRM)>)
SUBTTL UNDEFINE command tables
UNDFDB: $KEY (UND020,UND010,<$DEFAULT(<STRUCTURE>)>)
UND010: $STAB
ORNKEY (STRUCTURE,STR)
$ETAB
UND020: $DEV (CONFRM,<$HELP(<structure name>),$FLAGS(CM%PO)>)
END