Trailing-Edge
-
PDP-10 Archives
-
BB-M081Z-SM
-
monitor-sources/phymvr.mac
There are 20 other files named phymvr.mac in the archive. Click here to see a list.
; Edit= 9013 to PHYMVR.MAC on 8-Nov-88 by LOMARTIRE
;Merge Production changes to BUG text
; Edit= 8984 to PHYMVR.MAC on 27-Oct-88 by RASPUZZI
;Prevent SKDPF1 and PITRAP BUGHLTs by having the error path from GETBF call a
;new routine QUECHK (that falls into QUECMD). QUECHK will vamoose if Q1 does
;not have a legitmate command block.
; Edit= 8913 to PHYMVR.MAC on 17-Aug-88 by GSCOTT
;Update BUG. documentation.
; UPD ID= 8590, RIP:<7.MONITOR>PHYMVR.MAC.6, 11-Feb-88 16:56:16 by GSCOTT
;TCO 7.1218 - Update copyright date.
; UPD ID= 8451, RIP:<7.MONITOR>PHYMVR.MAC.5, 4-Feb-88 17:13:11 by GSCOTT
;More of TCO 7.1210 - Correct spelling in MSSCGL
; UPD ID= 8437, RIP:<7.MONITOR>PHYMVR.MAC.4, 4-Feb-88 15:57:37 by GSCOTT
;TCO 7.1210 - Set MSSCGL, MSSCTO, MSSREJ, and MSSSHT normally not dumpable.
; UPD ID= 75, RIP:<7.MONITOR>PHYMVR.MAC.3, 12-Aug-87 14:49:19 by MCCOLLUM
;TCO 7.1037 - Some SCAMPI routine have changed names. Fix the CALLs.
; *** Edit 7357 to PHYMVR.MAC by RASPUZZI on 22-Aug-86
; Remove routine GAPRID since the processor serial number is already in APRSER
; and make all CALLs to GAPRID refer to that resident location.
; *** Edit 7211 to PHYMVR.MAC by GRANT on 18-Dec-85
; Add CI counters for WATCH
; UPD ID= 2323, SNARK:<6.1.MONITOR>PHYMVR.MAC.58, 20-Aug-85 13:53:50 by LOMARTIRE
;More TCO 6.1.1334 - Remove MSSCFS BUGHLT since this is a normal case which
;can happen. This is not a problem as long as we reject incoming connection
;attempts at startup until there is a CFS connection established.
; UPD ID= 2161, SNARK:<6.1.MONITOR>PHYMVR.MAC.56, 5-Jun-85 10:41:45 by MCCOLLUM
;TCO 6.1.1406 - Update copyright notice.
; UPD ID= 2114, SNARK:<6.1.MONITOR>PHYMVR.MAC.55, 4-Jun-85 13:34:06 by WAGNER
;TCO 6.1.1423 - *** PERFORMANCE *** Dont let MSSCHK get called at LV8CHK
; UPD ID= 2019, SNARK:<6.1.MONITOR>PHYMVR.MAC.54, 28-May-85 12:09:31 by MCCOLLUM
;TCO 6.1.1238 - Fix more BUG. documentation
; UPD ID= 1924, SNARK:<6.1.MONITOR>PHYMVR.MAC.53, 7-May-85 21:35:44 by MCCOLLUM
;TCO 6.1.1238 - Fix more BUG. documentation
; UPD ID= 1861, SNARK:<6.1.MONITOR>PHYMVR.MAC.52, 1-May-85 16:21:23 by MCCOLLUM
;TCO 6.1.1238 - Fix more BUG. documentation
; UPD ID= 1842, SNARK:<6.1.MONITOR>PHYMVR.MAC.51, 30-Apr-85 11:05:39 by MCCOLLUM
;TCO 6.1.1238 - Fix BUG. documentation
; UPD ID= 1782, SNARK:<6.1.MONITOR>PHYMVR.MAC.50, 23-Apr-85 09:57:37 by LOMARTIRE
;TCO 6.1.1334 - Reject an incoming connection if no CFS activity detected
;Also, change MSSCFS into a BUGHLT to try to catch the problem
; UPD ID= 1612, SNARK:<6.1.MONITOR>PHYMVR.MAC.49, 11-Mar-85 09:51:43 by GRANT
;TCO 6.1.1245 - Add routine MSSSVD
; UPD ID= 1496, SNARK:<6.1.MONITOR>PHYMVR.MAC.48, 11-Feb-85 08:43:17 by GRANT
;TCO 6.1.1183 - Return MSCPX4 instead of MSCPX1 when not initialized
; UPD ID= 1449, SNARK:<6.1.MONITOR>PHYMVR.MAC.47, 1-Feb-85 14:18:19 by LOMARTIRE
;Add new symbols to describe the priority used by SC.SMG
; UPD ID= 1352, SNARK:<6.1.MONITOR>PHYMVR.MAC.46, 16-Jan-85 16:43:58 by MOSER
;TCO 6.1.1139 - *PERFORMANCE* - CHANGE PSKED REFS TO PSKD1
; UPD ID= 1306, SNARK:<6.1.MONITOR>PHYMVR.MAC.45, 10-Jan-85 17:33:09 by MOSER
;TCO 6.1.1128 - FIX A BUG WITH WRITE LOCKED DRIVES
; UPD ID= 1303, SNARK:<6.1.MONITOR>PHYMVR.MAC.44, 10-Jan-85 16:58:33 by MOSER
;TCO 6.1.1126 - REMOVE MSSGON AND SELECTIVLY DO MSSSHT
; UPD ID= 1240, SNARK:<6.1.MONITOR>PHYMVR.MAC.43, 28-Dec-84 09:35:54 by GRANT
;TCO 6..1097 - In MSXSCC, use CITIMR instead of DBUGSW and make the timeout value very large.
; UPD ID= 1135, SNARK:<6.1.MONITOR>PHYMVR.MAC.42, 28-Nov-84 17:59:18 by MOSER
;ADD MODEL BYTE 8 FOR T-20 SERVER TO CONFORM TO 1.2 OF MSCP SPEC
; UPD ID= 1057, SNARK:<6.1.MONITOR>PHYMVR.MAC.41, 13-Nov-84 09:05:52 by LOMARTIRE
;Use new sending priority symbols in SC.SMG calls.
;Remove MESPRI and replace with KLPMED.
; UPD ID= 1004, SNARK:<6.1.MONITOR>PHYMVR.MAC.40, 7-Nov-84 16:42:07 by MOSER
;TCO 6.2271 - FIX UNIT NUMBER CALC TO USE RELATIVE UNIT NUMBERS
; UPD ID= 5022, SNARK:<6.MONITOR>PHYMVR.MAC.39, 26-Oct-84 23:08:55 by MOSER
;FIX RESTRICT TO NOT ALLOW
; UPD ID= 4954, SNARK:<6.MONITOR>PHYMVR.MAC.38, 18-Oct-84 14:39:53 by MOSER
;LOOK AT INSKED BEFORE NSKED - PUT SCPAK UNDER DEBUG - MOVE MSSBCM
; UPD ID= 4826, SNARK:<6.MONITOR>PHYMVR.MAC.37, 17-Sep-84 10:43:46 by PURRETTA
;Upate copyright notice
; UPD ID= 4579, SNARK:<6.MONITOR>PHYMVR.MAC.36, 23-Jul-84 09:28:21 by HALL
;MSXABT - add index register to SETONE of MSABT
;CMDTMO - add index register to SETONE of MSCTO
; UPD ID= 4498, SNARK:<6.MONITOR>PHYMVR.MAC.35, 12-Jul-84 19:54:44 by LOMARTIRE
;REWORK CALLBACK HANDLING. REPLACE .SSCBD WITH .SSDDG (DROPPED DATAGRAM)
;CODE FOR AC CHANGE FOR .SSDGR/.SSMGR CALLBACKS. REMOVE .SSMNT AND .SSNWO.
; UPD ID= 4493, SNARK:<6.MONITOR>PHYMVR.MAC.34, 12-Jul-84 16:48:29 by MOSER
;SC.MAP BYTES NOT WORDS - ZERO BUFFERS AGAIN - REPORT BAD COMMANDS ALWAYS
; FIX RETRY OF FAILING COMMAND - INCREASE CONNECTION TABLE SIZE FOR BIGGER CFS
; UPD ID= 4425, SNARK:<6.MONITOR>PHYMVR.MAC.33, 3-Jul-84 14:27:09 by LOMARTIRE
;MAKE CALL TO SC.RCD PASS IN THE ADDRESS OF THE ARGUMENT BLOCK.
;OBTAIN BLOCK FROM FREE SPACE SINCE SC.RCD NO LONGER DOES SO.
;ALSO, OBTAIN BLOCK FOR SC.CSP FROM FREE SPACE AND CALL RELRES TO RELEASE.
; UPD ID= 4345, SNARK:<6.MONITOR>PHYMVR.MAC.32, 15-Jun-84 13:50:28 by LOMARTIRE
;PASS ADDRESS OF DATA BLOCK TO SC.CSP. DO NOT CALL RELRES ANYMORE.
; UPD ID= 4319, SNARK:<6.MONITOR>PHYMVR.MAC.31, 11-Jun-84 10:46:50 by LOMARTIRE
;REMOVE MSSCSP AND MSSSLL BUGCHKS - THEY ARE NO LONGER NEEDED
; UPD ID= 4295, SNARK:<6.MONITOR>PHYMVR.MAC.30, 4-Jun-84 14:07:04 by HAUDEL
;CHANGE CALLING CONVENTIONS FOR SC.MAP, DESCRIPTOR BLOCK HAS NEW FORMAT.
; UPD ID= 4282, SNARK:<6.MONITOR>PHYMVR.MAC.29, 1-Jun-84 12:20:38 by LOMARTIRE
;USE SC.NOD INSTEAD OF SC.SBI AT HITHRE
; UPD ID= 4200, SNARK:<6.MONITOR>PHYMVR.MAC.28, 9-May-84 13:42:53 by MOSER
;USE NEW PHYSIO ENTRY IOSIO
;REPLACE CALL TO SC.ABT WITH SC.DIS
;FIX MSSRL0 - ENHANCE CLENUP
; UPD ID= 4095, SNARK:<6.MONITOR>PHYMVR.MAC.27, 18-Apr-84 16:34:26 by MOSER
;ANOTHER BUG IN PREVIOUS
; UPD ID= 4087, SNARK:<6.MONITOR>PHYMVR.MAC.26, 17-Apr-84 09:39:32 by MOSER
;FIX A BUG IN PREVIOUS
; UPD ID= 4080, SNARK:<6.MONITOR>PHYMVR.MAC.25, 12-Apr-84 15:01:50 by MOSER
;DON'T CALL CHKOFL DURING ATTENTION BROADCAST - NO Q3
; UPD ID= 4008, SNARK:<6.MONITOR>PHYMVR.MAC.24, 28-Mar-84 22:32:54 by MOSER
;MAKE SERVER MORE TUNABLE
; BETTER ADDITIONAL DATA TO MSSREJ
; TURN ON CFS COORDINATION
; UPD ID= 3880, SNARK:<6.MONITOR>PHYMVR.MAC.23, 7-Mar-84 21:47:14 by MOSER
; CHANGE BUGxxx NAME TO CONFORM TO NEW CONVENTIONS
; UPD ID= 3819, SNARK:<6.MONITOR>PHYMVR.MAC.22, 29-Feb-84 17:14:18 by MOSER
;COUNT RETRIES SEPERATE FROM ORIGIONAL COMMANDS
; UPD ID= 3774, SNARK:<6.MONITOR>PHYMVR.MAC.21, 28-Feb-84 10:26:30 by MOSER
;AQUIRE IO PAGES AS NEEDED. PREVENT MASSIVE PAGE LOCKDOWN.
; DETECT ILLEGAL STATE IF RETURNING QUEUED COMMAND THAT ISN'T QUEUED
; GET A NEW LISTNER AFTER SC.REJ
; INTERLOCK WITH CFS TO PREVENT TRASHED DISKS. ** CURRENTLY SUPPRESSED **
; ONLY CHECK STATE STUFF ONCE/SECOND
; FIX CONNECTION MANAGEMENT WHEN STIAC COMMAND TIMES OUT
; USE .RESP1 WHEN GETTING FREE SPACE
; UPD ID= 3713, SNARK:<6.MONITOR>PHYMVR.MAC.20, 21-Feb-84 13:00:23 by CDUNN
;Change process names to use a 16 byte 8 bit ASCII string. Also change calls
;to SC.CON and SC.LIS to pass the address of the string, not a byte pointer.
; UPD ID= 3687, SNARK:<6.MONITOR>PHYMVR.MAC.19, 13-Feb-84 12:58:33 by MOSER
;FIX BUGS WHEN IO COMMAND HAS ERRORS. FIX ABORT TOO.
; UPD ID= 3664, SNARK:<6.MONITOR>PHYMVR.MAC.18, 7-Feb-84 18:22:37 by MOSER
;REPORT OFFLINE AND AVAILABLE CORRECTLY TO DRIVER
; UPD ID= 3658, SNARK:<6.MONITOR>PHYMVR.MAC.17, 7-Feb-84 14:34:22 by MOSER
;VARIOUS FIXES FOR ONLINE / OFFLINE TRANSITIONS
; UPD ID= 3625, SNARK:<6.MONITOR>PHYMVR.MAC.16, 1-Feb-84 17:55:54 by MOSER
; FIX A BUG IF NO IORBS
; CORRECTLY COUNT PACKETS IN USE.
; UPD ID= 3603, SNARK:<6.MONITOR>PHYMVR.MAC.15, 31-Jan-84 13:08:43 by MOSER
;ADD TMON FUNCTIONS
; UPD ID= 3566, SNARK:<6.MONITOR>PHYMVR.MAC.14, 27-Jan-84 15:03:08 by MOSER
;RETURN FREE SPACE AFTER SUCCESSFUL SC.CSP
; UPD ID= 3542, SNARK:<6.MONITOR>PHYMVR.MAC.13, 25-Jan-84 19:19:13 by MOSER
;MOVE SOME STORAGE TO RSEs IN STG.
; FIX A BUG IN ALLOW/RESTRICT OF A CI DISK.
; CHANGE ALLOW AND RESTRICT TO USE NEW FORMAT.
; WORK AROUND SC.CSP RETURNING WRONG VALUES.
; ADD "TRANSIENT OFFLINE" LOGIC.
; USE CORRECT UC.OLB BITS.
; USE NEW FORMAT FOR SC.MAP.
; UPD ID= 3500, SNARK:<6.MONITOR>PHYMVR.MAC.12, 20-Jan-84 17:05:47 by MOSER
; UPD ID= 3495, SNARK:<6.MONITOR>PHYMVR.MAC.11, 20-Jan-84 11:12:59 by CDUNN
;More TCO 6.1127 - Update call to SC.LIS to remove buffer arguments
; UPD ID= 3451, SNARK:<6.MONITOR>PHYMVR.MAC.10, 12-Jan-84 16:47:09 by MOSER
;WORK AROUND SCA LOSING LISTNER.
;FIX BUG IN SCFSD TO PREVENT SVILST. MAKE CHANGES FOR PERFORMANCE TESTING.
;MAKE PERIODIC CHECK RACE FREE. CHANGE ILSTAT INTO A BUGHLT. GIVE ERROR
; STATUS IF IOERR0 BUGCHK. CHANGE ORDER OF CONNECTION SHUTDOWN.
; MOVE INDICATION OF BAD COMMAND TO BUGCHK ON ALL ERRORS.
; UPD ID= 3354, SNARK:<6.MONITOR>PHYMVR.MAC.6, 21-Dec-83 08:26:33 by PURRETTA
;Fix a typeo
; UPD ID= 3351, SNARK:<6.MONITOR>PHYMVR.MAC.5, 20-Dec-83 14:49:55 by MOSER
;FIX VARIOUS BUGS. INSTALL PARANOIA CODE FOR INITIAL LOADTEST.
; UPD ID= 3322, SNARK:<6.MONITOR>PHYMVR.MAC.4, 14-Dec-83 17:31:00 by MOSER
;RESTRICT/ALLOW CHANGES. ENFORCE US.CIA. FIX RANDOM BUGS.
; UPD ID= 3264, SNARK:<6.MONITOR>PHYMVR.MAC.3, 6-Dec-83 14:58:01 by MOSER
;LOTS OF FIXES AND DEBUGGING STUFF
; UPD ID= 3191, SNARK:<6.MONITOR>PHYMVR.MAC.2, 18-Nov-83 09:11:15 by CDUNN
;More TCO 6.1127 - Change calls to SC.SMG to conform to new calling sequence
; COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1976, 1988.
; ALL RIGHTS RESERVED.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
; ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
; INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
; COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
; OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
; TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
; AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
; CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
; SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
SEARCH PROLOG,PHYPAR,SCAPAR,MSCPAR
TTITLE (PHYMVR,PHYMVR,< - MSCP SERVER>)
SUBTTL T. MOSER 2-FEB-83
Subttl Table of Contents
; Table of Contents for PHYMVR
;
; Section Page
;
;
; 1. Comments . . . . . . . . . . . . . . . . . . . . . . . 3
; 2. Macros . . . . . . . . . . . . . . . . . . . . . . . . 4
; 3. Externs . . . . . . . . . . . . . . . . . . . . . . . 5
; 4. Storage . . . . . . . . . . . . . . . . . . . . . . . 6
; 5. Initialization . . . . . . . . . . . . . . . . . . . . 9
; 6. Periodic Check . . . . . . . . . . . . . . . . . . . . 10
; 7. SCA Related Routines . . . . . . . . . . . . . . . . . 13
; 8. MSCP Commands . . . . . . . . . . . . . . . . . . . . 26
; 9. IORB Interrupt Service . . . . . . . . . . . . . . . . 37
; 10. Subroutines . . . . . . . . . . . . . . . . . . . . . 40
; 11. CFS Interface . . . . . . . . . . . . . . . . . . . . 65
; 12. End of PHYMVR . . . . . . . . . . . . . . . . . . . . 67
SUBTTL Comments
REPEAT 0,<
PHYMVR is the TOPS-20 MSCP server. It emulates an HSC-50 for MASSBUS disks.
The server makes certain assumptions which are necessarily true for its
operation they are:
1. All SCA callbacks happen at interrupt level and therefore 2 callbacks
cannot happen at the same time.
2. The interrupt level for CI interrupts is the same as the interrupt level
for MASSBUS (PHYSIO) interrupts.
3. Scheduler calls (periodic check) is not at interrupt level and code
must be protected from interrupts during periodic check.
4. (Actually an aspect of 3) No scheduler calls will happen during interrupt
processing.
5. The RPLQ is not protected at all interrupt levels (if this changes it would
simplify things somewhat) but is protected at scheduler calls into the
server and when the system is not either nosked or insked. It also assumes
that the RPLQ is race free when running the null job (NULJBF<>0).
6. Disk drives which are offline (US.OFS set in UDBSTS) but which haven't gone
through the MSCOFL code (from PHYOFL in PHYSIO) are "transiently offline"
and are not treated as offline to the drivers. This eliminates much
overhead and is a tremendous performance win when dual ported drives are
present.
Register conventions used herein:
Q1 - Address of command being processed
Q2 - Address of end packet buffer
Q3 - Address of SCDB for the connection
P1-P4 - PHYSIO register conventions
>
SUBTTL Macros
;
; MACRO TO GENERATE ERROR INDICATOR ACCORDING TO MSCP SPEC
;
; USE BADCMV(FIELD) TO PLACE ERROR INDICATOR (NOT BYTE SWAPPED) IN T1
; FIELD IS THE COMMAND OFFSET FOR THE FIELD OF THE COMMAND WHICH WAS IN ERROR
;
DEFINE BADCMV(FIELD)<
MOVX T1,ST.CMD+^D256*<FIELD-P.CRF>
>
;
; MACRO TO STORE SCA ERROR INFORMATION IN SCDB
; USE SCAERR(OP) AFTER CALLS TO SCA WHICH RETURN +1 TO INDICATE AN ERROR
; OP IS ANY INSTRUCTION TO PERFORM AFTER LOGGING THE ERROR
;
DEFINE SCAERR(OP)<
JRST [MOVEM T1,.SVSCE(Q3)
MOVEI T1,.
SUBI T1,1
MOVEM T1,.SVSCL(Q3)
MOVE T1,.SVSCE(Q3)
OP
JRST .+1]
>
SUBTTL Externs
EXTERN SCDBTB ;LOCAL EXTERNS
EXTERN SVCMDC
EXTERN SVCMRT
EXTERN SVSCAC
EXTERN SVIORB
EXTERN MSSMBF
EXTERN NCCWS
EXTERN CCWLST
EXTERN SVIRLN
EXTERN NSVIRB
EXTERN CFSNUM
EXTERN SVRDRV
EXTERN SVRTMX
EXTERN SVRTMV
EXTERN SVRTMI
EXTERN MSSNCH
EXTERN MSSLCH
SUBTTL Storage
HIBYT: POINT 16,T1,19 ;BYTE POINTERS FOR NORMALIZED 16 BIT BYTES
LOBYT: POINT 16,T1,35
MSSMSC==2 ;MINIMUM SEND CREDIT IS 2 (FOR BROADCASTS
; AND GCS END)
MSSMRC==1 ;MINIMUM RECIEVE CREDIT IS 1 (FOR GCS)
; MSCP SERVER STORAGE
RSI SVSTSW,<0> ;MSCP SERVER STATUS WORD
DEFSTR SVSINF,SVSTSW,0,1 ;INITIALIZATION FLAG
DEFSTR SVSILB,SVSTSW,1,1 ;LISTEN BUGINF HAS BEEN ISSUED
DEFSTR SVSLIS,SVSTSW,2,1 ;OK TO OPEN A LISTNER
RS(SVSLSX,1) ;MSCP SERVER LISTNER INDEX (-1 IF NONE)
RS(SRVCHK,1) ;MSCP SERVER CHECK FLAG
RS(SRVCKT,1) ;TIME TO CHECK STATES, LISTNER AND BROADCAST
RS(SVIRBH,1) ;MSCP SERVER IORB LIST HEADER
RS(SVBDKN,1) ;MSCP SERVER COUNT OF BROADCASTS TO DO
;
; SERVER STATISTICS
;
RS(SVILCM,1) ;COUNT OF ILLEGAL (ERROR) COMMANDS
RS(SVLCMD,1) ;LAST COMMAND
RS(SVPKIU,1) ;PACKETS IN USE
RS(SVMKIU,1) ;MAX PACKETS
RS(SVCMIU,1) ;NUMBER OF COMMANDS BEING HANDLED
RS(SVMCIU,1) ;MAXIMUM COMMANDS EVER HANDLED AT ONCE
RS(SVIPIU,1) ;IO PAGES USED
RS(SVMPIU,1) ;MAX IO PAGES EVER USED
RS(SVBKNS,1) ;TIMES BLOCKED FOR NOSKED EVENTS
; SERVER CONNECTION DATA BLOCK (SCDB) -- POINTED TO BY SCDBTB
.SVCIS==0 ;CONNECTION STATUS
DEFSTR(SVSTA,.SVCIS,5,6) ;CONNECTION STATE
SCLIS==0 ;NULL OR LISTENING. NOTE: MUST BE STATE 0
SCWOK==1 ;WAITING FOR OK TO SEND
SCOKS==2 ;OK TO SEND
SCDIS==3 ;SHUTDOWN - DISCONNECT (SCA FUNCTION .SSRID)
STFSS==SCDIS ;FIRST SHUTDOWN STATE
SCNOF==4 ;SHUTDOWN - NODE OFFLINE (SCA FUNCTION .SSNWO)
SCPBC==5 ;SHUTDOWN - PORT ERROR (SCA FUNCTION .SSPBC)
SCFSD==6 ;SHUTDOWN - DUE TO INTERNAL ERROR OR PROTOCAL
MC.ATN==1B6 ;ENABLE ATTENTION MESSAGES
MSKSTR(MCATN,.SVCIS(Q3),MC.ATN)
.SVCID==1 ;CONNECT ID
.SVTMO==2 ;SERVER TIMEOUT TIME
.SVTMV==3 ;SERVER TIMEOUT VALUE
.SVCMD==4 ;HEAD OF COMMAND QUEUE
.SVSCL==5 ;LAST SCA ERROR LOCATION
.SVSCE==6 ;LAST SCA ERROR CODE
.SVCME==7 ;TAIL OF COMMAND QUEUE
LENSVD==.SVCME+1 ;LENGTH OF SCDB
; QUEUED COMMAND FIELDS. RESIDE IN INVISIBLE SYSAP AREA OF PACKETS
.QCRTN==-C%BINV ;RETURN ADDRESS FOR COMMAND
.QCNXT==.QCRTN+1 ;NEXT COMMAND
.QCLST==.QCNXT+1 ;PREVIOUS COMMAND
.QCPID==.QCLST+1 ;VIRTUAL PAGE ADDRESS FOR IO
.QCSTS==.QCPID+1 ;STATUS AND RETRY COUNT
MS.COQ==1B0 ;COMMAND IS QUEUED
MSKSTR(MSCOQ,.QCSTS,MS.COQ)
MS.ABT==1B1 ;COMMAND IS ABORTED
MSKSTR(MSABT,.QCSTS,MS.ABT)
MS.CTO==1B2 ;COMMAND IS TIMED OUT
MSKSTR(MSCTO,.QCSTS,MS.CTO)
DEFSTR(QCSTS,.QCSTS,8,6) ;STATE FIELD
DEFSTR(QCENL,.QCSTS,17,9) ;END PACKET LENGTH
MINSTA==0 ;MINIMUM STATE VALUE
STCMD==0 ;TREAT AS INCOMING COMMAND
STWAE==1 ;WAITING TO ALLOCATE END
STWSR==2 ;WAITING TO SEND DATA (RETRYABLE)
STWRR==3 ;WAITING TO REQUEST DATA (RETRYABLE)
RTYSTA==STWRR ;MAXIMUM STATE FOR RETRY OPERATIONS
STWSE==4 ;WAITING TO SEND END PACKET (IO ONLY) STATE
STWSD==5 ;WAIT FOR SEND DATA STATE
DATSTA==STWSD ;FIRST DATA OPERATION STATE
STWRD==6 ;WAIT FOR RECIEVE DATA STATE
STIAC==7 ;IORB ACTIVE (IO ONLY) STATE
STWSB==10 ;WAITING TO SEND BUFFER (IO ONLY) STATE
STWRB==11 ;WAITING TO REQUEST BUFFER (IO ONLY) STATE
MAXSTA==STWRB ;MAX STATE VALUE
DEFSTR(QCCNT,.QCSTS,35,18) ;RETRY COUNT
.QCIORB==.QCSTS+1 ;IORB ADDRESS
.QCDBD==.QCIORB+1 ;DATA BUFFER DESCRIPTOR
.QCTMO==.QCDBD+1 ;TIMEOUT TIME
.QCDBG==.QCTMO+1 ;DEBUGGING WORD
.QCRT2==.QCDBG+1 ;SCA RETURN ADDRESS FOR QUEUED COMMANDS
IFLE <.MHUDA-.QCRT2>,<PRINTX ?QUEUED COMMAND INFO OVERLAPS MESSAGE>
;IORB FIELD DEFINITIONS
DEFSTR(IRBCID,IRBLEN,5,6) ;CONNECTION INDEX
DEFSTR(IRBCMD,IRBLEN,35,30) ;QUEUED COMMAND ADDRESS
; Note: The process names for listening are required by SCA to be 16 byte 8
;bit ASCII strings.
CONDNM: ASCI8 (<T-20$DISK >)
SRVDNM: ASCI8 (<MSCP$DISK >)
SUBTTL Initialization
;MSSINI - INITIALIZE MSCP SERVER (CALLED FROM SCAMPI)
; RETURN +1: ALWAYS, SERVER STARTED
;
MSSINI::JN SVSINF,,R ;IF INITIALIZED, JUST RETURN
; INITIALIZE IORB LIST
MOVEI T1,SVIRLN*<SVRDRV*NSVIRB-1>+SVIORB ;T1 POINTS TO END OF LIST
SETZM (T1) ;CLEAR END OF LIST
MSSIN1: CAIN T1,SVIORB ;DONE? (AT BEGINNING)
JRST MSSIN2 ;YES
MOVE T2,T1 ;NO - SAVE SUCCESSOR
SUBI T1,SVIRLN ;MOVE BACKWARD IN LIST
MOVEM T2,(T1) ;STORE FOREWARD POINTER
JRST MSSIN1 ;DO MORE
MSSIN2: MOVEM T1,SVIRBH ;STORE HEAD OF LIST
SETZM SCDBTB ;ZERO CONNECTION TABLE
XMOVEI T2,SCDBTB ;START OF BLT
XMOVEI T3,SCDBTB+1 ;DESTINATION
MOVEI T1,CFSNUM-1 ;NUMBER OF WORDS
EXTEND T1,[XBLT] ;ZERO TABLE
SETOM SVSLSX ;MARK NO LISTNER
SETZM SVIPIU ;INIT STATISTICS
SETZM SVMPIU
SETZM SVPKIU
SETZM SVMKIU
SETZM SVCMIU
SETZM SVMCIU
SETZM SVMPIU
SETZM SVILCM
SETZM SVBKNS
SETONE SVSINF ;MARK INITIALIZED
CALLRET MSSCHK ;FINISH WITH A CHECK
SUBTTL Periodic Check
;MSSCHK - PERIODIC CHECK
;
; THIS PERFORMS 4 FUNCTIONS
; 1. IT CHECKS FOR A NODE TIMEOUT. IF WE DO NOT RECIEVE A MESSAGE FROM A NODE
; WITHIN THE TIMEOUT INTERVAL WE SHUT IT DOWN AND RESYNC
;
; 2. IT RETRIES ALL COMMANDS AND EVENTUALLY TIMES THEM OUT. IT SHOULD NEVER
; BE NECESSARY TO REMOVE A COMMAND WHICH HAS TIMED OUT BUT WE
; DO THIS TO PREVENT ANY STRANGE ERRORS LEAVING COMMANDS QUEUED FOREVER
;
; 3. IT BROADCASTS AVAILABLE MESSAGES FOR UNITS WHICH HAVE RECENTLY COME ONLINE
;
; 4. IT GETS A NEW LISTNER IF WE DON'T HAVE ONE
;
; CALLED FROM SCHED PERIODICALLY
; CALL MSSCHK ;()
; RETURN +1: ALWAYS
;
RESCD
MSSCHK::JSP T1,[SETOM SRVCHK ;FLAG IN PERIODIC CHECK
CIOFF ;NO INTERRUPTS WHILE AT SCHEDULER LEVEL
CALL (T1) ; RETURN TO HERE
TRNA ; IF +1 RETURN
AOS -1(P) ; PRESERVE +2 NESS
CION ; ALLOW INTS AGAIN
SETZM SRVCHK ;NO LONGER IN CHECK
RET] ; AND RETURN TO CALLER
SAVEQ
MOVEI T1,MSSNCH ;NEXT TIME
MOVEM T1,MSSTIM ;SAVE IT
JE SVSINF,,R ;IF NOT INITIALIZED FORGET CHECK
MOVSI Q1,-CFSNUM ;SIZE OF HOST TABLE
MSSCH1: SKIPN Q3,SCDBTB(Q1) ;ADDRESS OF SCDB
JRST CHKNXT ;NONE. INACTIVE
LOAD T2,SVSTA,(Q3) ;GET STATE
CAIN T2,SCLIS ;LISTENING?
JRST CHKNXT ;LISTNER. DO NEXT ONE
MOVE T3,.SVCMD(Q3) ;COMMAND LIST HEAD
CAIL T2,STFSS ;SHUTDOWN?
JUMPE T3,[SETZ T1, ;SHUTDOWN AND EMPTY. CAN BE FREED UP
EXCH T1,SCDBTB(Q1) ;GET ADDRESS IN T1, MARK AS FREE
CALL RELRES ;RETURN FREE SPACE (T1/)
JRST CHKNXT] ;CHECK NEXT
CAIE T2,SCOKS ;CONNECTION OPEN?
JRST CHKNXT ;NO. DO NEXT ONE
MOVE T2,TODCLK ;GET NOW
SKIPN T3,.SVTMV(Q3) ;GET TIMEOUT VALUE IF ANY
JRST CHKCOQ ;NO TIMEOUT SET. SEE IF COMMANDS ON QUEUE
ADD T3,.SVTMO(Q3) ;ADD TIME OF LAST MESSAGE
CAMG T3,TODCLK ;TIMED OUT?
JRST CHKCOQ ;NO. SEE IF COMMANDS ARE ON QUEUE
MOVE T2,.SVCID(Q3) ;GET CONNECT ID
CALL MSSFSD ;SHUT IT DOWN (T2/)
JRST CHKNXT ;AND DO NEXT COMMAND
; HERE TO CHECK FOR PENDING COMMANDS AND RETRY THEM
CHKCOQ: MOVE T2,.SVCID(Q3) ;GET CONNECT ID
CALL CRDTA0 ;RETRY ALL QUEUED COMMANDS (T2/)
MOVE T1,TODCLK ;GET NOW
CAMG T1,SRVCKT ;TIME TO CHECK STATE?
JRST CHKNXT ;NOT YET.
LOAD T1,SVSTA,(Q3) ;GET STATE
CAIE T1,SCOKS ;OK TO SEND?
JRST CHKNXT ;NO, DON'T CHECK FOR OPEN
MOVE T1,[XWD .RESP1,.RDLEN] ;PRIORITY,,LENGTH OF FREE SPACE
MOVEI T2,.RESGP ;GET SPACE FROM RESIDENT FREE POOL
CALL ASGRES ;(T1,T2/T1) OBTAIN BLOCK
SCAERR <JRST CHKNXT> ;ERROR - COULD NOT GET A FREE SPACE BLOCK
MOVEM T1,T2 ;SAVE BLOCK ADDRESS
MOVE T1,.SVCID(Q3) ;GET CID AGAIN
BLCAL. (SC.SPL,<<T1>,<T2>>) ;[7.1037]GET CONNECT STATE
SCAERR <JRST [ MOVE T1,T2 ;GET BLOCK ADDRESS
CALL RELRES ;(T1) RETURN BLOCK TO FREE POOL
JRST CHKNXT]>;DO NEXT
LOAD T3,CDCST,(T2) ;GET STATE CODE
CAIE T3,.CSOPN ;IS IT OPEN?
JRST [ MOVE T1,T2 ;GET BLOCK ADDRESS
CALL RELRES ;(T1) RETURN BLOCK TO FREE POOL
CALL ILSTAT] ;SCA ERROR
MOVE T1,T2 ;GET BLOCK ADDRESS
CALL RELRES ;(T1) RETURN BLOCK TO FREE POOL
CHKNXT: AOBJN Q1,MSSCH1 ;DO NEXT
; BROADCAST STATUS OF NEW UNITS. COUNT OF UNITS IS IN BDKSTC. UNITS WHICH
; NEED TO BE BROADCAST HAVE US.BDK SET IN THEIR UDB THIS IS DONE ONCE EVERY
; SECOND
MOVE T1,TODCLK ;GET NOW
CAMG T1,SRVCKT ;TIME TO CHECK STATE?
RET ;NOT YET ALL DONE.
ADDI T1,MSSLCH ;NEXT TIME
MOVEM T1,SRVCKT ;SAVE IT.
SKIPN SVBDKN ;HAVE TO BROADCAST?
JRST CHKLSN ;NO. CHECK LISTNER STATUS
SETZB Q2,SVBDKN ;ASSUME ALL WILL SUCCEED. SETUP Q2 AS KONT
SETOB Q1,Q3 ;NO CHANNEL NO UNIT START WITH FIRST
BDKCK1: DMOVE T1,Q1
MOVE T3,Q3
CALL ADVCKS ;GET UNIT
JRST CHKLSN ;NO MORE UNITS. CHECK LISTNER STATUS
DMOVE Q1,T1 ;SAVE T1-T3
MOVE Q3,T3
MOVE T1,UDBSTS(T4) ;GET BITS
TXNE T1,US.CIA ;AVAILABLE?
TXNN T1,US.BDK ;NEED TO BROADCAST?
JRST BDKCK1 ;NO TO EITHER, SKIP IT
CALL MSXATA ;BROADCAST AVAILABILITY
JRST BDKCK1 ;DO MORE
; GET A LISTNER IF WE NEED ONE
CHKLSN: SKIPGE Q3,SVSLSX ;IS THERE A LISTNER?
CALLRET LISTEN ;NO LISTNER. TRY FOR ONE
CALL SETQ3I ;GET SCDB
JRST SCDBBG ;NONE!
MOVE T1,[XWD .RESP1,.RDLEN] ;PRIORITY,,LENGTH OF FREE SPACE
MOVEI T2,.RESGP ;GET SPACE FROM RESIDENT FREE POOL
CALL ASGRES ;(T1,T2/T1) OBTAIN BLOCK
SCAERR <RET> ;ERROR - COULD NOT GET A FREE SPACE BLOCK
MOVEM T1,T2 ;SAVE BLOCK ADDRESS
MOVE T1,.SVCID(Q3) ;GET CID
BLCAL. (SC.SPL,<<T1>,<T2>>) ;[7.1037]GET CONNECT STATE
SCAERR <JRST [ MOVE T1,T2 ;GET BLOCK ADDRESS
CALL RELRES ;(T1) RETURN BLOCK TO FREE POOL
RET]>
LOAD T3,CDCST,(T2) ;GET CONNECTION STATE
CAIE T3,.CSLIS ;IS IT LISTENING?
JRST [ MOVE T1,T2 ;GET BLOCK ADDRESS
CALL RELRES ;(T1) RETURN BLOCK TO FREE POOL
CALL ILSTAT] ; NO, SCA HAS LOST IT'S MIND
MOVE T1,T2 ;GET BLOCK ADDRESS
CALL RELRES ;(T1) RETURN BLOCK TO FREE POOL
RET ; YES, RETURN
SUBTTL SCA Related Routines
;MSSSTS - SCA INTERRUPT HANDLER
; T1/ SCA FUNCTION CODE
; T2-T4/ FUNCTION DEPENDENT DATA (SEE SCAPAR OR SUBROUTINE HEADER FOR DETAILS)
; CALL MSSSTS ;(T1,T2,T3,T4/)
; RETURN +1: ALWAYS
;
MSSSTS: SKIPL T1 ;CHECK CODE FOR LEGALITY. TOO LOW?
CAILE T1,.SSAFT ;OR TOO HIGH?
JRST ILLFCN ;ILLEGAL CODE FROM SCA. BETTER DIE NOW
AOS @[EP. SVSCAC(T1)] ;COUNT SCA INTERRUPTS
CALLRET @MSSDSP(T1) ;HOP TO IT
MSSDSP: DTBDSP (ILLFCN) ;.SSDGR - Datagram received
DTBDSP (NEWMES) ;.SSMGR - Message received
DTBDSP (PRTGON) ;.SSPBC - Port broke connection
DTBDSP (HITHRE) ;.SSCTL - Connect to listen
DTBDSP (ILLFCN) ;.SSCRA - Connect response available
DTBDSP (R) ;.SSMSC - Message/datagram send complete
DTBDSP (ILLFCN) ;.SSDDG - Datagram dropped
DTBDSP (NOCRDT) ;.SSLCL - Little credit left
DTBDSP (ILLFCN) ;.SSNCO - Node came online
DTBDSP (OK2SND) ;.SSOSD - OK to send data
DTBDSP (REQDIS) ;.SSRID - Remote initiated disconnect
DTBDSP (CRDTAV) ;.SSCIA - Credit is available
DTBDSP (DMADON) ;.SSDMA - DMA complete
;NOCRDT - SCA INTERRUPT - LITTLE CREDIT REMAINS
; T1/ .SSLCL
; T2/ CONNECT ID
; T3/ NUMBER OF CREDITS NEEDED TO GET YOU OVER THRESHOLD
; RETURNS +1: ALWAYS
;** NO ACTION TAKEN THIS IS A CONVIENENT DUMMY ROUTINE FOR MISC. DEBUGGING
NOCRDT: RET
;LISTEN - OPEN A LISTNER FOR A DISK SERVER CONNECTION
; CALL LISTEN ;()
; RETURNS +1: ALWAYS
; MSSLSI - LISTNER INDEX OR -1 IF UNABLE TO GET ONE
;
LISTEN: SAVEAC <Q1,Q3>
SKIPL SVSLSX ;SHOULD BE NO LISTNER
BUG.(HLT,MSSTML,PHYMVR,SOFT,<LISTEN - MSCP server too many listners>,,<
Cause: The MSCP server tried to obtain a listner when one already existed.
This indicates an inconsistency in the software.
>)
JE SVSLIS,,R ;IF ILLEGAL NOW JUST RETURN
MOVSI Q1,-CFSNUM ;SIZE OF HOST TABLE
LSNLUP: SKIPE SCDBTB(Q1) ;IS THIS ENTRY FREE?
JRST NXTLSN ;NO, TRY NEXT
BLCAL. (ASGRSB,<[LENSVD],[.RESP1],[.RESUP]>) ;GET SOME FREE SPACE (/T1)
JRST NOLIS ;NONE
HRRZS Q1 ;GET INDEX ONLY
MOVEM T1,SCDBTB(Q1) ;SAVE ADDRESS OF CONNECTION DATA BLOCK
MOVE Q3,T1 ;SAVE ADDRESS OF SCDB
; REALLY LISTEN NOW
BLCAL. (SC.LIS,<<.,SRVDNM>,<.,CONDNM>,[-1],<.,MSSSTS>,Q1,[MSSMSC],[MSSMRC]>) ;LISTEN
SCAERR <JRST NOLIS> ;FAILURE
MOVEM Q1,SVSLSX ;SAVE LISTNER INDEX
MOVEM T1,.SVCID(Q3) ;SAVE CONNECT ID PROVIDED BY SCA
SETZRO SVSILB ;ISSUE BUGINF IF THIS FAILS IN THE FUTURE
RET
NXTLSN: AOBJN Q1,LSNLUP ;TRY THE NEXT
PUSH P,Q1 ;ERROR CODE IS LOOP COUNTER
JRST LSNBGC ;NO MORE, ISSUE BUGCHK
NOLIS: PUSH P,T1 ;SAVE ERROR CODE
SKIPE T1,SCDBTB(Q1) ;DO WE HAVE FREE SPACE?
CALL RELRES ;RELEASE IT (T1)
SETZM SCDBTB(Q1) ;DON'T LET THE ENTRY LOOK USED
LSNBGC: POP P,T1 ;GET ERROR CODE
JN SVSILB,,R ;IF BUG ALREADY ISSUED RETURN
BUG.(INF,MSSCGL,PHYMVR,SOFT,<MSCP server can't get listener>,<<T1,ERROR>>,<
Cause: The MSCP server cannot get a listener for connection requests.
The server continues to try to get a listener.
Action: If this bug occurs often or is reproducible, set it dumpable and
submit an SPR along with a dump and instructions on reproducing it.
Data: ERROR - Error code returned by SC.LIS
>,,<DB%NND>) ;[7.1210]
SETONE SVSILB ;DON'T ISSUE THIS BUGINF CONSTANTLY
RET
;HITHRE - ACCEPT/REJECT A CONNECTION WHEN WE GET A RESPONSE TO OUR LISTEN
; T1/ .SSCTL
; T2/ CONNECT ID
; T3/ POINTER TO CONNECTION DATA FROM REMOTE SYSTEM
; RETURNS +1: ALWAYS
; CONNECTION ACCEPTED IF CONNECTOR WAS A KL10
; NEW LISTNER WILL BE SETUP IF POSSIBLE
; CONNECTION STATE WILL BE MC.WOK (WAITING FOR OK TO SEND DATA)
;
HITHRE: SAVEQ
LOAD Q3,SID,T2 ;GET HOST INDEX
CAME Q3,SVSLSX ;SAME AS LISTNER INDEX
BUG.(HLT,MSSLNM,PHYMVR,SOFT,<MSCP server listner does not match>,,<
Cause: The listner index does not match the known index of the listner.
>)
CALL SETQ3 ;GET SCDB ADDRESS (T2/Q3)
JRST SCDBBG ;NONE!
MOVEM T2,Q1 ;SAVE CONNECT ID
MOVE T1,[XWD .RESP1,.RDLEN] ;PRIORITY,,LENGTH OF FREE SPACE
MOVEI T2,.RESGP ;GET SPACE FROM RESIDENT FREE POOL
CALL ASGRES ;(T1,T2/T1) OBTAIN BLOCK
SCAERR <JRST R2LBAD> ;ERROR - COULD NOT GET A FREE SPACE BLOCK
MOVEM T1,T3 ;SAVE BLOCK ADDRESS
MOVE T1,Q1 ;CID IN T1
CALL SC.NOD ;GET NODE NUMBER FOR CONNECT ID (T1/T1,T2)
MOVE T1,T3 ;GET ADDRESS OF DATA BLOCK
BLCAL. (SC.RCD,<<T2>,<T1>>) ;GET CONFIGURATION DATA OF THIS NODE
SCAERR <JRST [ MOVE T1,T2 ;GET ADDRESS OF BLOCK
CALL RELRES ;(T1) RETURN BLOCK TO FREE POOL
JRST R2LBAD]> ;REJECT. KEEP LISTENING
LDB T1,[POINT PKSID,.RDPCH(T2),PKPID] ;GET TYPE OF NODE
SETZ Q1, ;ASSUME A KL
CAIE T1,ID.KL ;A KL10?
HRRO Q1,T1 ;NO FLAG IT
SKIPN CFSHCT ;CFS talking?
SKIPE CFSCMC ;Or trying?
SKIPA ;Yes, all is ok
HRLI Q1,-2 ;No, reject the attempt
MOVE T1,T2 ;GET ADDRESS OF BLOCK
CALL RELRES ;(T1) RETURN BLOCK TO FREE POOL
JUMPL Q1,R2LBA0 ;If flagged, we do not want to talk to it
BLCAL.(SC.ACC,<.SVCID(Q3),[0],[MSSMBF],[0]>); ACCEPT THE OVERTURE
SCAERR <JRST R2LBA1> ;FORGET IT
MOVX T1,SCWOK ;NEW STATE IS WAITING FOR OK TO SEND
STOR T1,SVSTA,(Q3)
SETOM SVSLSX ;CURRENTLY NO LISTNER EXISTS
CALL LISTEN ;GET A NEW LISTENER
RET ;AND DONE
R2LBA0: MOVE T1,Q1 ;IF A BAD PROCESSOR USE TYPE AS ERROR CODE
R2LBAD: PUSH P,T1 ;SAVE ERROR
MOVE T1,.SVCID(Q3) ;GET CID
CALL SC.NOD
POP P,T3
BUG.(INF,MSSREJ,PHYMVR,SOFT,<MSCP server rejecting connection>,<<T2,NODE>,<T1,CID>,<T3,ERROR>>,<
Cause: The MSCP server is rejecting a connection because the connector cannot
be identified due to an SCA failure or because the connector is not on
a KL10 processor.
Action: No action required, this bug is for information only.
Data: NODE - Node number
CID - Connect ID
ERROR - SCA error code
>,,<DB%NND>) ;[7.1210]
BLCAL. (SC.REJ,<.SVCID(Q3),[0]>) ;REJECT THE CONNECTION
SCAERR ;REMEMBER ERROR IF ANY
SETO T2, ;GET A -1
EXCH T2,SVSLSX ;NO LISTNER NOW. GET INDEX
SETZ T1, ;GET A ZERO
EXCH T1,SCDBTB(T2) ;GET FREE SPACE POINTER
CALL RELRES ;RELEASE FREE SPACE
CALLRET LISTEN ;GET A NEW LISTNER
R2LBA1: MOVE T3,T1 ;SAVE FOR BUGCHK
MOVE T1,.SVCID(Q3) ;GET CID AGAIN
CALL SC.NOD ;GET NODE NUMBER
BUG.(CHK,MSSCAC,PHYMVR,SOFT,<MSCP server can't accept connection>,<<T2,NODE>,<T1,CID>,<T3,REASON>>,<
Cause: The MSCP server cannot accept a connection.
Action: If this bug occurs often or is reproducible, set it dumpable and
submit an SPR along with a dump and instructions on reproducing it.
Data: NODE - node number
CID - connect ID
REASON - reason for failure
>,R)
;MSSFSD - SERVER INITIATED (FORCED) SHUTDOWN
;PRTGON - PORT ERROR INITIATED SHUTDOWN
;REQDIS - DRIVER WISHES TO SHUT DOWN CONNECTION
; T2/ CONNECT ID
; CALL name ;(T2/)
; RETURNS +1: ALWAYS
; ALL QUEUED COMMANDS ABORTED (IF IORB ACTIVE ABORT IS IN MSSIRD)
; BUGINF ISSUED AND STATUS UPDATED
REQDIS: SKIPA T1,[SCDIS]
MSSFSD: MOVX T1,SCFSD ;ERROR BIT
JRST MSSSH0 ;AND CONTINUE
PRTGON: MOVX T1,SCPBC ;PORT BROKE CONNECTION
MSSSH0: SAVEPQ ;SAVE ALL P AND Q REGS
STKVAR <REASON>
MOVEM T1,REASON
LOAD Q3,SID,T2 ;GET CID INDEX
CAMN Q3,SVSLSX ;LISTNER?
SETOM SVSLSX ;NOT ANY MORE!
MOVE T1,T2 ;GET CID
CALL SC.NOD ;AND NODE NUMBER
MOVE T3,REASON ;GET REASON CODE
CALL SETQ3I ;GET POINTER TO SCDB (Q3/Q3)
RET ;ALREADY GONE IGNORE IT
BLCAL. (SC.DIS,<.SVCID(Q3),T3>) ;DISCONNECT
SCAERR ;IGNORE ERROR. PROBABLY ALREADY GONE
LOAD T1,SVSTA,(Q3) ;GET CURRENT STATE
CAIL T1,STFSS ;ALREADY SHUT DOWN?
RET ;YES, ALL DONE
MOVE T3,REASON
STOR T3,SVSTA,(Q3) ;SAVE NEW STATE
CAIE T3,SCFSD ;FORCED SHUTDOWN?
IFSKP.
MOVE T3,.SVCIS(Q3) ;GET COMPLETE STATUS
MOVE T4,.SVSCE(Q3) ;GET ERROR CODE
MOVE T1,.SVCID(Q3) ;GET CID
CALL SC.NOD ;AND NODE
BUG.(INF,MSSSHT,PHYMVR,SOFT,<MSCP server shutdown node>,<<T2,NODE>,<T1,CID>,<T3,STATUS>,<T4,ERROR>>,<
Cause: The MSCP server was forced to shut down a node.
Action: No action required, this bug is for information only.
Data: NODE - node number
CID - connect ID
STATUS - connection status
ERROR - last SCA error
>,,<DB%NND>) ;[7.1210]
ENDIF.
; MARK ALL UNITS AS OFFLINE TO CI
MOVE P5,.SVCID(Q3) ;GET CID INDEX VALUE
LOAD P5,SID,P5
MOVSI P4,-CHNN ;LOOP OVER CHANNELS
PUSH P,Q3 ;SAVE AN AC
OFLLP1: MOVX T1,CS.CIP
SKIPE P1,CHNTAB(P4) ;CHAN EXIST?
TDNE T1,CDBSTS(P1) ;YES. IS IT A CI CHAN?
JRST OFLLP2 ;YES. GET NEXT
CALL DGUMAP ;NO. DO INSTR FOR EACH UDB
CALL OFLUDB ;INSTRUCTION TO EXECUTE
OFLLP2: AOBJN P4,OFLLP1 ;LOOP OVER ALL CHANS
; REMOVE ALL QUEUED COMMANDS (EXCEPT THOSE AWAITING IORB COMPLETION)
POP P,Q3 ;RESTORE Q3
MOVE Q2,.SVCMD(Q3) ;GET HEAD OF LIST
DEQLUP: JUMPE Q2,R ;NO MORE COMMANDS. RETURN
MOVE Q1,Q2 ;GET ADDRESS OF COMMAND IN Q1
MOVE Q2,.QCNXT(Q1) ;GET ADDRESS OF NEXT COMMAND FOR STEPPING
LOAD T1,QCSTS,(Q1) ;GET STATE
CAIN T1,STIAC ;IORB ACTIVE?
JRST IRBDEQ ;YES, REMOVE FROM PHYSIO QUEUES
CALL RTNCMD ;RETURN BUFFER SPACE
JRST DEQLUP ;LOOP FOR MORE
;NOTE: THE FOLLOWING LABEL IS A PLACE HOLDER FOR REMOVAL OF AN IORB FROM
; PHYSIO QUEUES.
IRBDEQ: JRST DEQLUP ;*** NOT IMPLEMENTED JUST LEAVE IT
; THIS IS A COROUTINE FOR DGUMAP TO OFFLINE ALL UNITS FOR THE CONNECTION
; IN ERROR
OFLUDB: MOVE T1,BITS+<^D36-CFSNUM>(P5) ;GET BIT
ANDCAM T1,UDBCHR(P3) ;OFFLINE IT FOR THIS PORT
RET
;OK2SND - SCA NOTIFICATION OF OK TO SEND TO CONNECTION
; T1/ .SSOSD
; T2/ CONNECT ID
; CALL OK2SND ;(T1,T2/)
; RETURNS +1: ALWAYS
; STATE UPDATED TO SCOKS (BUGHLT IF STATE IS NOT SCWOK ON ENTRY)
; CONNECTION FULLY OPEN (CONTROLLER ONLINE IN MSCP SPEC.)
;
OK2SND: SAVEQ
CALL SETQ3 ;(T2/Q3)
JRST SCDBBG ;NONE!
LOAD T3,SVSTA,(Q3) ;GET STATUS
CAIE T3,SCWOK ;WAITING FOR THIS?
BUG.(HLT,MSSNWO,PHYMVR,SOFT,<OK2SND - OK to send when not waiting>,<<T2,CID>>,<
Cause: The MSCP server received notification of OK to send from a node. The
node in question was not flagged as waiting for an OK to send.
Data: CID - connect ID
>)
MOVX T3,SCOKS ;NOW OK TO SEND
STOR T3,SVSTA,(Q3) ;SAVE IT
MOVEI T3,^D60*^D1000 ;GET 60 SECONDS IN MILLISECS
MOVEM T3,.SVTMV(Q3) ;SAVE AS TIMEOUT VALUE
MOVE T3,TODCLK ;GET NOW
MOVEM T3,.SVTMO(Q3) ;AND USE AS LAST TIME WE HEARD FROM DRIVER
RET
;CRDTAV - CREDIT IS AVAILABLE
;CRDTA0 - RETRY COMMANDS BUT NO CREDIT ENTRY POINT
;
;RETRY COMMANDS AND POTENTIALLY TIME THEM OUT. IF A COMMAND IS TIMEDOUT THE
;CONNECTION IS CLOSED.
;
; T2/ CID
; CALL CRDTAV ;(T2/)
; RETURNS +1: ALWAYS COMMANDS RETRIED OR TIMEDOUT.
;
CRDTA0: TDZA T1,T1 ;ONLY DO COMMAND STATE
CRDTAV: SETO T1, ;RETRY ALL
SAVEQ
STKVAR <NXTCMD,ENTFLG>
MOVEM T1,ENTFLG
CALL SETQ3 ;SETUP Q3
JRST SCDBBG ;NONE!
LOAD T1,SVSTA,(Q3) ;GET COMMAND STATE. INITIAL CHECK FOR
CAIE T1,SCOKS ;OK TO SEND
CALL ILSTAT ;NO!
SKIPN Q1,.SVCMD(Q3) ;ANY COMMANDS QUEUED?
RET ;NO
;
; WE MUST CHECK THE STATE FOR OK TO SEND AFTER EACH COMMAND SINCE A COMMAND
; MAY CAUSE THE STATE TO CHANGE IF IT IS NOT SCOKS WE SHOULD SIMPLY RETURN
;
CRDTA2: LOAD T1,SVSTA,(Q3) ;GET COMMAND STATE
CAIE T1,SCOKS ;OK TO SEND
RET ;GOT SHUTDOWN. RETURN NOW.
MOVE T1,.QCNXT(Q1) ;GET NEXT COMMAND
MOVEM T1,NXTCMD ;SAVE IT
MOVE T1,.QCTMO(Q1) ;GET TIMEOUT TIME
CAMLE T1,TODCLK ;PAST?
JRST CRDTA3 ;NO
MOVE T1,TODCLK ;YES, COMPUTE NEXT TIMEOUT INTERVAL
ADDI T1,SVRTMI
MOVEM T1,.QCTMO(Q1) ;AND SAVE IT
INCR QCCNT,(Q1) ;COUNT NUMBER OF TRIES
LOAD T1,QCCNT,(Q1) ;GET COUNT
CAILE T1,SVRTMX ;TOO MANY?
JRST CMDTMO ;YES TIMOUT COMMAND
CRDTA3: LOAD T2,QCSTS,(Q1) ;GET STATE
CAIL T2,MINSTA ;CHECK STATE FOR LEGALITY. TOO SMALL?
CAILE T2,MAXSTA ;OR TOO BIG?
CALL ILSTAT ;ILLEGAL STATE
SETZ Q2, ;REMEMBER NO END PACKET YET
CAILE T2,RTYSTA ;RETRYABLE ON POLL?
SKIPN ENTFLG ;NO, RETRY ONLY IF CREDIT AVAILABLE
SKIPN ENTFLG ;YES, DON'T RETRY ON CREDIT AVAILABLE
CALL @CRDTAB(T2) ;RETRY FUNCTION
CRDNXT: SKIPE Q1,NXTCMD ;GET NEXT COMMAND TO RETRY
JRST CRDTA2 ;AND TRY IT
RET
; HERE TO TIMEOUT COMMAND
CMDTMO: MOVE T3,.QCSTS(Q1)
MOVE T1,.SVCID(Q3)
LOAD T4,QCSTS,(Q1)
CALL SC.NOD
TXNE T3,MS.CTO ;ALREADY TIMED OUT?
JRST CRDNXT ;YES, MUST BE STUCK IORB DO NEXT
BUG.(INF,MSSCTO,PHYMVR,SOFT,<PHYMVR - Command timeout>,<<T2,NODE>,<T1,CID>,<T4,STATE>>,<
Cause: Unknown. A command did not complete in the timeout interval.
Action: If this bug occurs often or is reproducible, set it dumpable and
submit an SPR along with a dump and instructions on reproducing it.
Data: NODE - node number
CID - connect ID
STATE - command state
>,,<DB%NND>) ;[7.1210]
SETONE MSCTO,(Q1) ;MARK COMMAND AS TIMED OUT
CALL MSSFSD ;SHUT DOWN CONNECTION
JRST CRDNXT
CRDTAB: DTBDSP (NEWME0) ;STCMD - TREAT LIKE MESSAGE RECIEVED
DTBDSP (GETEND) ;STWAE - WAITING TO ALLOCATE END
DTBDSP (SNDDAT) ;STWSR - WAITING TO SEND DATA (RETRY)
DTBDSP (REQDAT) ;STWRR - WAITING TO REQUEST DATA (RETRY)
DTBDSP (ENDRTY) ;STWSE - WAITING TO SEND END ONLY
DTBDSP (R) ;STWSD - NO ACTION
DTBDSP (R) ;STWRD - NO ACTION
DTBDSP (R) ;STIAC - NO ACTION
DTBDSP (SNDDAT) ;STWSB - SEND BUFFER
DTBDSP (REQDAT) ;STWRB - REQUEST BUFFER BE SENT
;DMADON - SERVER INITIATED DMA COMPLETE
; T1/ .SSDMA
; T2/ CONNECT ID OF CONNECTION DMA WAS DONE FOR
; T3/ 32 BIT BUFFER NAME OF DMA BUFFER
; CALL DMADON ;(T1,T2,T3/)
; RETURNS +1: ALWAYS
; READ - SEND END PACKET AND COMMAND IS COMPLETE
; WRITE - CALL PHYSIO TO DO DISK WORK
;
DMADON: SAVEQ
CALL SETQ3 ;GET INDEX TO DATA (T2/Q3)
JRST SCDBBG ;NONE!
SKIPN Q1,.SVCMD(Q3) ;ANY COMMANDS ON QUEUE?
JRST DMAQNF ;NO. ERROR
DMCFNL: CAMN T3,.QCDBD(Q1) ;SAME?
JRST DMAFND ;YES. FOUND IT
SKIPN Q1,.QCNXT(Q1) ;GET NEXT
DMAQNF: BUG.(HLT,MSSDNQ,PHYMVR,SOFT,<DMADON - DMA done queue entry not found>,<<T2,CID>,<T3,BUFF>>,<
Cause: A DMA complete interrupt occurred and no commands were found which had
a matching buffer name. This indicates a software inconsistency.
Data: CID - connect ID
BUFF - 32 bit buffer name
>)
JRST DMCFNL ;AND CHECK IT TOO
; HERE WHEN A MATCHING COMMAND IS FOUND
DMAFND: JN MSABT,(Q1),ABTEN0 ;ABORTED SEND END PACKET
LOAD T1,QCSTS,(Q1) ;GET STATE
CAIN T1,STWSD ;WAITING TO SEND DATA (READ) ?
JRST MAKIOE ;YES. ALL DONE
CAIE T1,STWRD ;WAITING TO RECIEVE DATA (WRITE)?
CALL ILSTAT ;ILLEGAL, DIE
SAVEP
CALL IOUNIT ;GET UDB ADDRESS
RET ;CAN'T
MOVE T1,.QCIORB(Q1) ;GET IORB ADDRESS
MOVE T2,P3 ;AND UDB ADDRESS
CALLRET GOIO ;QUEUE IORB (T1,T2/)
;NEWMES - MESSAGE RECIEVED
; T1/ .SSMGR
; T2/ CONNECT ID
; T3/ ADDRESS OF MESSAGE BUFFER
; T4/ <FLAGS>B6 ! <ADDR OF ROUTINE TO RETURN BUFFER>B35
; CALL NEWMES ;(T1,T2,T3,T4/)
; RETURNS +1: ALWAYS
; APPROPRIATE ACTION PERFORMED
;
NEWMES: SAVEQ
AOS SVRECV ;[7211] COUNT THE MESSAGE
AOS T1,SVCMIU ;COUNT COMMANDS
CAMLE T1,SVMCIU ;IS THIS THE MAX EVER?
MOVEM T1,SVMCIU ;YES
MOVX Q2,.QCRTN ;COMPUTE
ADD Q2,T3 ;START ADDRESS OF HEADER
MOVE Q3,Q2 ;END = START...
AOS Q3 ;PLUS ONE
SETZM (Q2) ;ZERO FIRST WORD
MOVEI Q1,C%BINV+.QCRT2 ;COUNT OF WORDS TO ZERO
EXTEND Q1,[XBLT] ;ZERO THEM
TXZ T4,-1B6 ;CLEAR SCAMPI FLAGS
MOVEM T4,.QCRTN(T3) ;SAVE ADDRESS TO RETURN BUFFER
MOVE Q1,T3 ;SAVE MESSAGE ADDR
SETZ Q2, ;NO END PACKET YET
CALL SETQ3 ;SETUP Q3 AS DATA POINTER (T2/Q3)
JRST SCDBBG ;NONE!
SKIPA T4,[0] ;NORMAL ENTRY POINT
NEWME0: MOVEI T4,1 ;ENTRY TO RETRY COMMANDS
LOAD T1,SVSTA,(Q3) ;GET CONNECTION STATE
CAIE T1,SCOKS ;OK TO SEND (CONTROLLER ONLINE)
CALL ILSTAT ;ERROR DIE
MOVE T1,TODCLK ;STATUS IS OK. GET NOW
MOVEM T1,.SVTMO(Q3) ;SAVE TIME OF LAST MESSAGE
NEWME1: MOVE T1,P.OPCD(Q1) ;GET OPCODE
CALL SRVFUL ;REVERSE IT
LDB T1,LOBYT ;GET OPCODE ONLY
SETZ T3, ;INITILIZE DATA POINTER
MSFCMD: HLRZ T2,MSFNCT(T3) ;GET COMMAND FROM TABLE
JUMPE T2,BADCMD ;END OF DATA. ILLEGAL OP CODE
CAME T1,T2 ;THIS COMMAND?
AOJA T3,MSFCMD ;NO. TRY AGAIN
HRRZ T1,MSFNCT(T3) ;YES. GET ROUTINE ADDRESS
AOS @[EP. SVCMDC(T3) ;COUNT COMMANDS AND RETRIES
EP. SVCMRT(T3)](T4)
MOVEM T1,SVLCMD ;REMEMBER LAST COMMAND
JRST (T1) ;AND GO TO IT
SUBTTL MSCP Commands
;MSCP COMMAND TABLE. ONLY DISC COMMANDS FROM THE MSCP MINIMAL DISC SUBSET
;ARE CURRENTLY IMPLEMENTED
MSFNCT: -1,,BADCMD ;NO SUCH COMMAND
OP.RD,,MSXRD ;READ DATA
OP.WR,,MSXWR ;WRITE DATA
OP.GCS,,MSXGCS ;GET COMMAND STATUS
OP.GUS,,MSXGUS ;GET UNIT STATUS
OP.ONL,,MSXONL ;ONLINE A UNIT
OP.ABO,,MSXABT ;ABORT COMMAND
OP.SCC,,MSXSCC ;SET CONTROLLER CHARACTERISTICS
OP.AVA,,MSXAVA ;AVAILABLE COMMAND
;THE FOLLOWING COMMANDS ARE DEFINED IN THE MINIMAL DISC MSCP SUBSET OF
;COMMANDS AND SHOULD BE ADDED FOR CONSISTENCY BUT SINCE THEY ARE NEVER USED
;IN KL-KL COMMUNICATIONS THEY ARE NOT CURRENTLY INCLUDED
REPEAT 0,<
OP.SUC,,MSXSUC ;SET UNIT CHARACTERISTICS
OP.DAP,,MSXDAP ;DETERMINE ACCESS PATHS
OP.CCD,,MSXCCD ;COMPARE CONTROLLER DATA
OP.CMP,,MSXCMP ;COMPARE HOST DATA
OP.ACC,,MSXACC ;ACCESS COMMAND
OP.ERS,,MSXERS ;ERASE COMMAND
OP.FLS,,MSXFLS ;FLUSH COMMMAND
>
0 ;END OF LIST
;BADCMD - ILLEGAL COMMAND (OPCODE IS ILLEGAL OR UNSUPPORTED)
;BADCM0 - INVALID COMMAND (AC1 CONTAINS STATUS BITS)
;
; CALL BADCMD ;(Q1,Q3/)
; CALL BADCM0 ;(T1,T3,Q1,Q3/)
;
; RETURNS +1: ALWAYS, END PACKET SENT
;
BADCMD: BADCMV P.OPCD ;BAD OPCODE
MOVEI T3,P%STS ;LENGTH IS STATUS
TDZA T2,T2 ;DO BUGINF TOO
BADCM0: SETO T2, ;NO BUGINF
STKVAR <ERRBIT,SIZE,BGFLAG>
MOVEM T3,SIZE
MOVEM T2,BGFLAG
MOVEM T1,ERRBIT
AOS SVILCM ;COUNT BAD COMMANDS
MOVE T1,P.STS(Q1) ;ADD STATUS TO ERROR
CALL REVFUL
IORX T1,OP.END ;ADD END
IORB T1,ERRBIT ;MAKE COMPOSITE
MOVE T1,P.OPCD(Q1) ;GET OPCODE
CALL REVFUL ;IN NORMAL FORMAT
MOVE T3,T1
MOVE T4,ERRBIT
MOVE T1,.SVCID(Q3)
CALL SC.NOD
SKIPN BGFLAG ;BUGINF?
BUG.(INF,MSSBCM,PHYMVR,SOFT,<BADCMD - MSCP server bad command>,<<T2,NODE>,<T1,CID>,<T3,OPCODE>,<T4,ERRBIT>>,<
Cause: The MSCP server received a command with an illegal or unsupported
operation specified.
Action: If this bug occurs often or is reproducible, set it dumpable and
submit an SPR along with a dump and instructions on reproducing it.
Data: NODE - node number
CID - connect ID
OPCODE - operation code
ERRBIT - error bits and status of command
>)
JUMPN Q2,BADCM1 ;HAVE A MESSAGE BUFFER
CALL GETEBF ;NO. GET ONE
RET ;CAN'T
BADCM1: MOVE T1,P.UNIT(Q1) ;UNIT IF ANY
MOVEM T1,P.UNIT(Q2) ;SAVE IT
MOVE T1,P.BCNT(Q1) ;BYTE COUNT
MOVEM T1,P.BCNT(Q2) ;SAVE
MOVE T1,ERRBIT ;GET ERROR BITS AGAIN
CALL REVFUL ;BACK TO WIERD FORMAT
MOVEM T1,P.STS(Q2) ;SAVE IN MESSAGE
MOVE T3,SIZE ;LENGTH
CALLRET SNDEND ;SEND IT
;MSXSCC - SET CONTROLLER CHARACTERISTICS
;
; 1. INSURE VERSION NUMBER IS 0 (BADCMD IF NOT)
;
; 2. INSURE ONLY LEGAL FLAGS ARE SPECIFIED
;
; 3. SAVE FLAGS AND TIMEOUT INTERVAL
;
; 4. BUILD END PACKET CONTAINING 10 SECOND TIMEOUT VALUE
;
; Q1/ COMMAND
; Q3/ POINTER TO CONNECTION DATA (SCDB)
; CALL MSXSCC ;(Q1,Q2,Q3/)
; RETURNS +1: ALWAYS
; ACTION PERFORMED OR ERROR FLAGGED AND END PACKET SENT
; OR COMMAND QUEUED
MSXSCC: CALL GETEBF ;GET A BUFFER FOR END MESSAGE (Q1/Q2)
RET ;CAN'T. COMMAND IS QUEUED
MOVE T1,P.VRSN(Q1) ;GET VERSION
CALL REVWF
LDB T1,LOBYT ;GET BYTE
JUMPN T1,[BADCMV P.VRSN ;BAD VERSION NUMBER
MOVEI T3,P%CNTI ;SIZE OF MESSAGE
CALLRET BADCM0] ;ERROR IF VERSION ISN'T ZERO
MOVE T1,P.CNTF(Q1) ;GET CONTROLLER FLAGS
CALL REVFUL
ANDX T1,CF.ATN!CF.MSC!CF.THS ;ALLOW ONLY THESE FLAGS
; ERROR FLAGS ARE SUPPORTED BUT IGNORED SINCE
; WE DO NOT SENT ERROR DATAGRAMS
MOVX T2,MC.ATN ;ATTENTION FLAG
ANDCAM T2,.SVCIS(Q3)
TXNE T1,CF.ATN ;ENABLING ATTENTION MESSAGES?
IORM T2,.SVCIS(Q3) ;SAVE NEW FLAGS
TXO T1,CF.MLH+CF.576 ;TELL DRIVER WE ARE MULTI-HOST AND 576 BYTES
CALL REVFUL
MOVEM T1,P.CNTF(Q2) ;SAVE END PACKET FLAGS
MOVE T1,P.HTMO(Q1) ;GET TIMOUT VALUE
CALL REVWF ;IN NORMAL FORMAT
IMULI T1,^D1000 ;TO MILLISECONDS
MOVEM T1,.SVTMV(Q3) ;SAVE
MOVEI T1,SVRTMV ;GET SERVER TIMEOUT VALUE
SKIPE CITIMR ;DEBUGGING?
MOVEI T1,^D7200 ;YES ALLOW MUCH LONGER TIME
CALL REVW2
MOVEM T1,P.CTMO(Q2) ;SAVE IN END MESSAGE
MOVE T1,APRSER ;[7357] Get CPU serial number
CALL REVW2
MOVEM T1,P.CNTI(Q2) ;SAVE AS CONTROLLER ID
MOVE T1,[BYTE (8) 1,8] ;SERVER AND MODEL 8
CALL REVW2
MOVEM T1,P.CNTI+1(Q2) ;SAVE IT IN END PACKET
MOVX T1,OP.SCC!OP.END!ST.SUC ;END CODE, SUCCESS
CALL REVFUL
MOVEM T1,P.STS(Q2) ;SAVE AS STATUS
MOVEI T3,P%CNTI ;SIZE OF END MESSAGE
CALLRET SNDEND
;MSXABT - ABORT COMMAND
; FIND THE COMMAND AND IF A NON DATA OPERATION SIMPLY FORGET IT AND RETURN
; PACKETS TO SCA. IF IT IS A DATA OPERATION WE MARK IT AS ABORTED AND DO THE
; CORRECT THING WHEN IO COMPLETES
; Q1/ COMMAND
; Q3/ SCDB ADDRESS
; CALL MSXABT ;(Q1,Q2/)
; RETURNS +1: ALWAYS
; ACTION PERFORMED OR COMMAND QUEUED
; COMMANDS WHICH HAVE IO ACTIVE ARE SIMPLY FLAGGED AS ABORTED AND
; WILL BE DEQUEUED LATER
;
MSXABT: CALL GETEBF ;GET END PACKET BUFFER (Q1/Q2)
RET ;CAN'T COMMAND QUEUED
MOVE T1,P.OTRF(Q1) ;GET OLD COMMAND NUMBER
CALL FNDCMD ;FIND COMMAND (T1/T1)
JRST ABTCM1 ;NOT FOUND. ALREADY GONE
SETONE MSABT,(Q1) ;SET ABORTED STATUS BIT
LOAD T1,QCSTS,(Q1)
CAIN T1,STIAC ;IORB ACTIVE
JRST ABTCM1 ;YES
CAIE T1,STWSD ;WAITING FOR DATA TO BE SENT/RECIEVED
CAIN T1,STWRD
SKIPA ;YES. DON'T SEND END PACKET YET.
CALL ABTEND ;NO. SEND END PACKET FOR ABORTED COMMAND (T1/)
ABTCM1: MOVE T1,P.UNIT(Q1) ;GET UNIT NUMBER FROM ABORT COMMAND
MOVEM T1,P.UNIT(Q2) ;SAVE IN END PACKET
MOVE T1,P.OTRF(Q1) ;AND COMMAND REF OF COMMAND WE ABORTED
MOVEM T1,P.OTRF(Q2) ;IN END PACKET
MOVX T1,OP.ABO!OP.END!OP.SUC ;END, ABORT, SUCCESS
CALL REVFUL
MOVEM T1,P.STS(Q2) ;IN STATUS
MOVEI T3,P%OTRF ;GET SIZE OF MESSAGE
CALLRET SNDEND ;SEND END PACKET
;MSXGCS - GET COMMAND STATUS
;
; FIND A COMMAND AND RETURN IT'S STATUS. THE STATUS IS A NUMBER WHICH SHOULD
; DECREASE AS THE COMMAND NEARS COMPLETION.
; STATUS = (MAX TIMEOUT VALUE + 1) - CURRENT VALUE
; IF WE ARE WAITING FOR AN IO OPERATION STATUS = 2 * STATUS
;
; Q1/ COMMAND
; Q3/ SCDB
; CALL MSXGCS ;(Q1,Q2/)
; RETURNS +1: ALWAYS, STATUS SENT OR COMMAND QUEUED
;
MSXGCS: CALL GETEBF ;GET BUFFER FOR END PACKET (Q1/Q2)
RET ;CAN'T
MOVE T1,P.OTRF(Q1) ;GET NUMBER TO FIND
CALL FNDCMD ;FIND IT
JRST MSXGC1 ;STATUS IS NOT FOUND
LOAD T3,QCSTS,(T1) ;GET STATE
MOVEI T2,SVRTMX+1 ;GET RETRY COUNTER +1
OPSTR <SUB T2,>,QCCNT,(T1) ;SUBTRACT NUMBER OF RETRIES SO FAR
CAIL T3,DATSTA ;DATA OPERATION PENDING?
LSH T2,1 ;YES INCREASE STATUS BY ALOT
MOVE T1,T2 ;GET STATUS IN T1
CALL REVFUL
MOVEM T1,P.CMST(Q2) ;SAVE STATUS OF COMMAND
MSXGC1: MOVE T1,P.UNIT(Q1)
MOVEM T1,P.UNIT(Q2)
MOVE T1,P.OTRF(Q1)
MOVEM T1,P.OTRF(Q2) ;SAVE OLD COMMAND NUMBER
MOVX T1,OP.GCS!OP.END!ST.SUC ;GCS , END , SUCCESS
CALL REVFUL
MOVEM T1,P.STS(Q2) ;SAVE STATUS
MOVEI T3,P%CMST
CALLRET SNDEND ;SEND END PACKET
;MSXGCS - GET UNIT STATUS
; Q1/ COMMAND
; Q3/ SCDB ADDRESS
; CALL MSXGUS ;(Q1,Q2/)
; RETURNS +1: ALWAYS, ACTION PERFORMED OR COMMAND QUEUED
;
MSXGUS: SAVEP ;SAVE P REGS TOO
CALL GETEBF ;GET END PACKET BUFFER (Q1/Q2)
RET ;CAN'T
CALL FNDUNT ;FIND THE UNIT NUMBER (Q1/T1,P1,P2,P3)
JRST [ SETZM P.UNIT(Q2) ;NO UNIT FOUND
JRST MSXGU1] ;RETURN INFO
;SAVE INFO IN BLOCK INCLUDING SUCCESS CODE
CALL REVW2 ;SAVE UNIT NUMBER (MAY HAVE CHANGED) (T1/T1)
MOVEM T1,P.UNIT(Q2)
SETZ T1, ;INITIALIZE FLAGS
CALL SETUI0 ;GET UNIT INFO (T1/T1)
JRST [ MOVEI T3,P%RCTC ;CANNOT GET SIZE AND RETURN ERROR
JRST BADCM0]
;CANNOT PROBLEM CODE IN T1
MOVE T2,UDBSIZ(P3) ;GET POINTER TO SIZE
MOVE T1,SECSRF(T2) ;SEC/SURF
LSH T1,4 ;POSITION IN 32 BITS
MOVEI T3,1 ;1 TRACK/GROUP
DPB T3,HIBYT ;SAVE IT IN HI ORDER BYTE
CALL REVFUL
MOVEM T1,P.TRCK(Q2) ;SAVE IT
MOVE T1,SECCYL(T2) ;SEC/CYL
CALL REVW2
MOVEM T1,P.CYL(Q2) ;SAVE IT
MOVX T1,ST.SUC ;ASSUME ONLINE
MOVE T2,UDBCHR(P3) ;GET BITS
MOVE P5,.SVCID(Q3) ;GET CID INDEX
LOAD P5,SID,P5
TDNN T2,BITS+<^D36-CFSNUM>(P5) ;ONLINE?
MOVX T1,ST.AVL ;NO. ASSUME AVAILABLE
CALL CHKOFL ;CHECK IF OFFLINE (P1,P3/)
MSXGU1: MOVX T1,ST.OFL ;YES. STATUS IS OFFLINE
IORX T1,OP.GUS!OP.END ;END, GUS
CALL REVFUL
MOVEM T1,P.STS(Q2)
MOVEI T3,P%RCTC ;SIZE OF MESSAGE
CALLRET SNDEND ;SEND END PACKET
;MSXONL - ONLINE A UNIT
;MSXAVA - MAKE A UNIT AVAILABLE
; THE UNIT IS MARKED AS ONLINE BY A SINGLE BIT IN THE UDBCHR WORD
; THE NUMBER IS WORDSIZE-INDEX INTO CID TABLE
; AVAILABLE CLEARS THAT BIT
; Q1/ COMMAND
; Q3/ SCDB ADDRESS
; CALL MSXAVA ;(Q1,Q3/)
; CALL MSXONL ;(Q1,Q3/)
; RETURNS +1: ALWAYS, ACTION PERFORMED AND COMMAND QUEUED OR END PACKET SENT
;
MSXAVA: SKIPA T1,[-1] ;REMEMBER ENTRY
MSXONL: SETZ T1,
SAVEP ;SAVE P REGISTERS
STKVAR <ENTFLG> ;ENTRY FLAG
MOVEM T1,ENTFLG
CALL GETEBF ;GET BUFFER FOR END PACKET
RET ;CAN'T
CALL FNDUNT ;FIND UNIT (Q1/T1,P1,P2,P3)
JRST [ SETZM P.UNIT(Q2) ;NO UNIT FOUND
MOVX T1,ST.OFL ;FLAG OFFLINE
JRST MSXON1] ;RETURN INFO
CALL REVW2
MOVEM T1,P.UNIT(Q2) ;SAVE UNIT NUMBER
MOVX T1,ST.OFL ;GET READY FOR OFFLINE
CALL CHKOFL ;CHECK IF OFFLINE
JRST MSXON1 ;OFFLINE.
MOVE P5,.SVCID(Q3) ;GET CID INDEX VALUE
LOAD P5,SID,P5
SKIPE ENTFLG ;ONLINE COMMAND?
JRST AVADON ;NO. AVAILABLE
CALL SETUID ;GET UNIT INFO
JRST [ MOVEI T3,P%VSER ;SIZE OF ONLINE COMMAND AND RETURN ERROR
JRST BADCM0]
HRRZ T2,UDBSIZ(P3) ;GET POINTER TO SIZE TABLES
MOVE T1,SECUNT(T2) ;GET SECTORS
CALL REVW2 ;REVERSE IT
MOVEM T1,P.UNSZ(Q2) ;SAVE UNIT SIZE
MOVX T1,ST.SUC ;ASSUME SUCCESS
MOVE T2,UDBCHR(P3) ;GET CHARACTERISTICS WORD
TDOE T2,BITS+<^D36-CFSNUM>(P5) ;ONLINE THE UNIT
IORX T1,ST.ONL ;SAY ALREADY ONLINE
MSXON2: MOVEM T2,UDBCHR(P3) ;SAVE NEW CHARACTERISTICS WORD
MSXON1: IORX T1,OP.END ;ADD END TO STATUS
MOVX T2,OP.ONL ;ASSUME COMMAND WAS ONLINE
MOVEI T3,P%VSER ;SIZE OF ONLINE COMMAND
SKIPE ENTFLG ;WAS IT?
JRST [ MOVEI T3,P%STS ;NO. IT WAS AVAILABLE GET CORRECT SIZE
MOVX T2,OP.AVA ;AND CORRECT OPCODE
JRST .+1]
IOR T1,T2 ;MOVE CORRECT OPCODE TO STATUS WORD
CALL SRVFUL
MOVEM T1,P.STS(Q2) ;SAVE STATUS
CALLRET SNDEND
AVADON: MOVE T2,UDBCHR(P3) ;GET CHARACTERISTICS WORD
TDZ T2,BITS+<^D36-CFSNUM>(P5) ;MARK AS AVAILABLE
MOVEM T2,UDBCHR(P3) ;SAVE CHARACTERISTICS
JRST MSXON2 ;AND CONTINUE
;MSXRD - READ DATA
;
; READ DATA - 1. BUILD AN IORB AND QUEUE IT TO PHYSIO
; 2. AT IORB DONE TIME SEND THE DATA TO THE REQUESTING SYSTEM
; 3. AT DMA DONE TIME SEND AN END PACKET
;
; THE FOLLOWING ROUTINE PERFORMS STEP 1.
MSXRD: SAVEP
CALL IOSETU ;SETUP FOR IO
RET ;ERROR. MESSAGE SENT
MOVE T1,P.MOD(Q1)
CALL REVFUL ;REVERSE FLAGS
MOVX T2,IRFRED ;ASSUME READ
TXNE T1,MD.CMP ;COMPARE DATA?
MOVX T2,IRFRVC ;YES, DO READ VALIDITY
CALL MAKIRB ;MAKE IORB FOR READ PAGE (T2,Q1,Q3,P1,P2,P3/T1,P4)
JRST NOIORB ;CANNOT
GOIO: MOVX T3,STIAC ;STATUS IS IORB ACTIVE
STOR T3,QCSTS,(Q1)
CALLRET IOSIO ;START IO
;MSXWR - WRITE DATA
;
; WRITE DATA - 1. BUILD AN IORB
; 2. GET DATA TO WRITE FROM REQUESTING SYSTEM
; 3. AT DMA DONE QUEUE IORB TO PHYSIO
; 4. AT IORB DONE TIME SEND END PACKET
;
; THE FOLLOWING IMPLEMENTS STEP 1 AND 2
MSXWR: SAVEP
CALL IOSETU
RET ;CAN'T
MOVE T1,P.MOD(Q1)
CALL REVFUL ;REVERSE FLAGS
MOVX T2,IRFWRT ;ASSUME WRITE
TXNE T1,MD.CMP ;COMPARE DATA?
MOVX T2,IRFWVC ;YES, DO WRITE VALIDITY
CALL MAKIRB ;MAKE IORB FOR WRITE PAGE
JRST NOIORB ;CAN'T
CALLRET GETWD ;GET DATA AND QUEUE
NOIORB: JUMPE T1,R ;IF RESOURCE ALLOCATION FAILURE JUST RETURN
MOVEI T3,P%FBBK ;REAL ERROR IN T1 SET LENGTH
CALLRET BADCM0 ;AND SEND ERROR END PACKET
SUBTTL IORB Interrupt Service
;MSSIRD - IORB COMPLETION INTERRUPT HANDLER
; T1/ IORB
; READ - SEND DATA ACROSS CI TO REQUESTING SYSTEM
;
; WRITE - SEND END PACKET. REQUEST IS COMPLETE
;
MSSIRD: EA.ENT ;RUN IN 1
SAVEQ
LOAD Q3,IRBCID,(T1) ;GET CID
CALL SETQ3I ;GET SCDB ADDRESS
JRST SCDBBG ;NONE!
LOAD Q1,IRBCMD,(T1) ;AND COMMAND ADDRESS
LOAD T1,SVSTA,(Q3) ;GET COMMAND STATE
CAIL T1,STFSS ;SHUTDOWN?
JRST RTNCMD ;YES, RETURN COMMAND
JN MSABT,(Q1),ABTEN0 ;ABORTED. SEND ABORTED END PACKET
LOAD T3,QCSTS,(Q1) ;GET COMMAND STATUS
CAIE T3,STIAC ;WAITING FOR IORB COMPLETE?
CALL ILSTAT ;NOT WAITING FOR IORB COMPLETE IS ILLEGAL
MOVE T2,IRBSTS(T1) ;GET STATUS
LDB T3,IRYFCN ;GET FUNCTION CODE
TXNE T2,IS.ERR ;COMPOSITE ERROR SET?
CALLRET CHKIOE ;YES. ANALYZE IT
CAIE T3,IRFRVC ;READ VALIDITY?
CAIN T3,IRFRED ;OR READ?
IFNSK.
MOVX T1,STWSB ;YES NEW STATE IS WAITING TO SEND BUFFER
STOR T1,QCSTS,(Q1) ;SAVE IT
CALLRET SNDDAT ;SEND DATA
ENDIF.
;FUNCTION WAS WRITE. MARK SUCCESS AND SEND END PACKET
IFN ST.SUC,< ;SUCCESS MAY BE ZERO SO DON'T BOTHER
MOVE T1,P.STS(Q1) ;GET COMMAND STATUS
CALL REVFUL
TXO T1,ST.SUC ;ADD SUCCESS
CALL REVFUL
IORM T1,P.STS(Q1)
>
CALLRET MAKIOE ;ALL DONE. SEND END PACKET
;CHKIOE - ANALYZE IORB ERROR AND SEND END PACKET
; T2/ IORB STATUS BITS
; Q1/ COMMAND
; Q3/ SCDB ADDRESS
; CALL CHKIOE ;(T2,Q1,Q3/)
; RETURNS +1: ALWAYS, ERROR BITS LIT, END PACKET SENT
;
CHKIOE: SETZ T1, ;INITIALIZE MSCP ERROR BITS
TXNE T2,IS.DVE!IS.WGU!IS.NRT ;DRIVE ERROR?
MOVX T1,ST.DRV ;YES. FLAG IT
TXNE T2,IS.DTE!IS.RTL ;DATA ERROR?
MOVX T1,ST.DAT ;YES
TXNE T1,IS.WLK ;WRITE PROTECTED?
MOVX T1,ST.WPR ;YES
IFE. T1 ;[8913] Any error bits set?
BUG.(CHK,MSSER0,PHYMVR,SOFT,<IORB done error and error bits 0>,<<T2,IRBERR>>,<
Cause: An IORB completed with bit IS.ERR set indicating an error. The MSCP
server could not find any relevent error.
Action: If this bug occurs often or is reproducible, set it dumpable and
submit an SPR along with a dump and instructions on reproducing it.
Data: IRBERR - IORB status word
>)
MOVX T1,ST.CNT ;[8913] Controller error
ENDIF. ;[8913]
CALL REVFUL
IORM T1,P.STS(Q1) ;SAVE ERROR STATUS
CALLRET MAKIOE ;SEND END PACKET
;GETEND - JACKET ROUTINE FOR RETRY END SENDING WHEN NO BUFFERS ARE AROUND
;
GETEND: SAVEAC <Q2>
LOAD T1,QCSTS,(Q1)
CAIE T1,STWAE
CALL ILSTAT
JRST MAKIO0
;MAKIOE - MAKE AND SEND END PACKET FOR IO COMMAND
; Q1/ COMMAND
; Q3/ SCDB
; CALL MAKIOE ;(Q1,Q3/)
; RETURNS +1: ALWAYS, END PACKET SENT OR COMMAND QUEUED (STWSE)
;
MAKIOE: SAVEAC <Q2> ;SAVE Q2
CALL CLENUP ;RELEASE ALL RESOURCES
MOVEI T1,P%FBBK ;LENGTH OF END PACKET
STOR T1,QCENL,(Q1) ;SAVE IT IN CASE WE LOSE
MOVX T1,STWAE ;GET WAIT TO ALLOCATE END
STOR T1,QCSTS,(Q1) ;SAVE IT
MAKIO0: CALL GETEBF ;GET END PACKET BUFFER (/Q2)
RET ;CAN'T
MOVE T1,P.STS(Q1) ;GET STATUS
CALL REVFUL
TXO T1,OP.END ;ADD END STATUS
CALL REVFUL
MOVEM T1,P.STS(Q2) ;SAVE
MOVE T1,P.UNIT(Q1) ;AND UNIT
MOVEM T1,P.UNIT(Q2) ;SAVE
MOVE T1,P.BCNT(Q1) ;BYTE COUNT
MOVEM T1,P.BCNT(Q2) ;SAVE
MOVEI T3,P%FBBK ;SIZE OF END PACKET
CALLRET SNDEND ;SEND IT
SUBTTL Subroutines
;MAKIRB - MAKE IORB FROM QUEUED COMMAND
; T2/ IORB FUNCTION
; Q1/ PACKET ADDRESS
; Q3/ SCDB ADDRESS
; P1/ CDB
; P2/ KDB
; P3/ UDB
;
; RETURNS +1 ERROR T1/ 0 RESOURCE ALLOCATION FAILURE
; T1/ WORD OFFSET CONTAINING BAD DATA
; +2 SUCCESS IORB ADDRESS IN P4
;
; NOTE: DESTROYS P REGISTERS
;
MAKIRB: STKVAR <IOFNC,BYTCNT,<BDAT,5>>
SKIPG NRPLQ ;ANY NEED TO BOTHER NOW
JRST RETZ ;NO, NO PAGES AROUND!
SKIPN NULJBF ;NULL JOB? OR
SKIPE SRVCHK ;PERIODIC CHECK?
JRST MAKIR0 ;YES WE ARE RACE FREE.
SKIPN INSKED ;INSKED?
SKIPE NSKED ;OR NOSKED?
JRST [AOS SVBKNS ;COUNT BLOCKS FOR NSKED EVENTS
CALL MSSCZK ;AND MAKE SCHED KNOW ABOUT US PAINLESSLY
JRST RETZ] ;YES, WE MAY SCREW UP RPLQ SO TRY LATER
MAKIR0: MOVEM T2,IOFNC ;SAVE IORB FUNCTION CODE
SKIPN SVIRBH ;IORB LIST NONNULL?
JRST RETZ ;NO IORBS RETURN +1
MOVE P4,@SVIRBH ;GET SUCCESSOR
EXCH P4,SVIRBH ;NEW HEAD OF LIST
MOVEM P4,.QCIORB(Q1) ;SAVE ADDRESS OF IORB
PIOFF ;THIS IS VERY TRICKY. WE NEED PEACE AND QUIET
SKIPG NRPLQ ;STILL SOME PAGES?
JRST NOPGS ;NO
HRRZ T1,@SRPLQ ;GET TOP PAGE
CAIN T1,SRPLQO ;EMPTY?
HRRZ T1,@DRPLQ ;YES, USE ALTERNATE RPLQ
SOS NRPLQ ;TAKE PAGE OFF REPLACABLE
MOVE 2,@CST3X+1
HRRZ 3,2
HLLM 2,@CST3X+3
HLRZ 3,2
HRRM 2,@CST3X+3
SETZRO CORMB,@CST0X+1 ;NOT MODIFIED
SETZM @CST3X+1 ;CLEAR FLAGS, OWNER, ADDRESS
LOAD T2,CSTPST,+T1 ;GET SPECIAL PAGE STATE
CAIE T2,PSTAVL ;AVAILABLE?
JRST [CALL OFRQ ;NO PUT IT BACK
JRST NOPGS] ;AND QUIT
MOVEM T1,.QCPID(Q1) ;SAVE PAGE ID (PHYSICAL NUMBER)
MOVX T2,PSTSPM ;CHANGE SPECIAL PAGE STATE
STOR T2,CSTPST,+T1
CALL ONSPMQ ;PUT PAGE ON SPECIAL MEMORY QUEUE NOW
;RETURNS PION
MOVE T1,.QCPID(Q1) ;GET PAGE
MOVEI T2,PSIOP ;SET STATE TO IO TO ALLOW PARITY ERROR SCANS
STOR T2,CSTAGE,+T1
AOS T1,SVIPIU ;COUNT PAGES IN USE
CAML T1,SVMPIU
MOVEM T1,SVMPIU ;AND MAXIMUM
SETZM 0(P4) ;CLEAR FIRST WORD OF BLOCK
MOVS T1,P4 ;BUILD BLT POINTER
HRRI T1,1(P4) ; ...
BLT T1,SVIRLN-1(P4) ;CLEAR BLOCK
STOR Q1,IRBCMD,(P4) ;SAVE COMMAND ADDRESS IN IORB
MOVE T1,.SVCID(Q3) ;GET CID INDEX
LOAD T1,SID,T1
STOR T1,IRBCID,(P4) ;AND SAVE IT
MOVE T1,P.LBN(Q1) ;GET BLOCK NUMBER FROM COMMAND
CALL REVFUL
LSH T1,-<4+2> ;RIGHT ADJUST, UNCONVERT TO PRE MSCP FORMAT
TLZ T1,DSKMSK ;CLEAR UNUSED BITS
TXO T1,DSKAB ;AND SET DISK ADDRESS BIT
MOVEM T1,IRBADR(P4) ;STORE DEVICE ADDRESS
MOVEI T1,IRMWRD ;WORD MODE
DPB T1,IRYMOD ;STORE IN IORB
MOVSI T2,DSKMSK ;INVALID BITS IN DISK ADDRESS
ANDCAB T2,IRBADR(P4) ;CLEAR THE BITS AND GET DISK ADDRESS
HRRZ T3,UDBSIZ(P3) ;GET POINTER TO SIZE TABLES
CAML T2,SECUNT(T3) ;LEGAL DISK ADDRESS SPECIFIED?
JRST [BADCMV P.LBN ;NO. ERROR
RET]
MOVEI T1,IRBLEN+1(P4) ;BUILD TAIL,,HEAD OF CCW LIST
HRLI T1,IRBLEN+2(P4) ; ...
MOVEM T1,IRBXFL(P4) ;STORE
MOVEI T1,MSSIRD ;INTERRUPT ROUTINE TO CALL
MOVEM T1,IRBIVA(P4) ;STORE IN IORB
MOVE T1,P.BCNT(Q1) ;GET BYTE COUNT
CALL REVFUL ;IN 32 BITS
MOVEM T1,BYTCNT ;SAVE BYTE COUNT
IDIVI T1,<^D36_4/8> ;IN 36 BITS, CONVERT BYTES (8) TO WORDS
SKIPE T2 ;INEXACT MULTIPLE?
AOS T1 ;YES, ADD 1
CAILE T1,NCCWS*PGSIZ ;GREATER THAN MAX (ONLY DO 1 PAGE XFRS)?
JRST [BADCMV P.BCNT ;ERROR
RET]
HRRZM T1,IRBCNT(P4) ;STORE COUNT IN IORB
MOVE T2,.QCPID(Q1) ;GET PHYSICAL PAGE NUMBER
LSH T2,PGSFT ;MAKE IT A PHYSICAL ADDRESS
SETZM .MDNXT+BDAT ;NEXT BUFFER DESCRIPTOR (NONE)
MOVE T1,BYTCNT ;GET 32 BIT BYTE COUNT
LSH T1,-4 ;MAKE 36 BITS
MOVEM T1,.MDLEN+.MDSSD+BDAT ;SIZE OF SEGMENT IN BYTES
MOVEM T2,.MDADR+.MDSSD+BDAT ;PHYSICAL PAGE ADDRESS
SETZM .MDSSD+.MDLSD+BDAT ;NEXT SEGMENT DESCRIPTOR (NONE)
MOVE T1,IOFNC ;GET FUNCTION
DPB T1,IRYFCN ;STORE IN IORB
SETZ T2, ;SET UP FLAGS WORD. ASSUME READ COMMAND.
CAIE T1,IRFWRT ;WRITE?
CAIN T1,IRFWVC ;OR WRITE VALIDITY?
TXO T2,SQ%WRT ;SET WRITABLE BIT
MOVEI T1,MD%DHD ;GET HIGH DENSITY CODE
STOR T1,MD%DMD,T2 ;SET HIGH DENSITY MODE.
MOVEM T2,.MDFLG+BDAT ;STORE FLAGS IN DESCRIPTOR BLOCK
BLCAL. (SC.MAP,<<.,BDAT>>) ;MAP BUFFER FOR CI DMA
SCAERR <JRST [ CALL CLENUP ;RELEASE EVERYTHING
JRST RETZ]> ;AND RETURN RESOURCE FAILURE
MOVEM T1,.QCDBD(Q1) ;SAVE BUFFER NAME
MOVE T1,IRBCNT(P4) ;RETRIEVE WORD COUNT
MOVE T2,.QCPID(Q1) ;AND PAGE NUMBER
LSH T2,PGSFT ;MAKE IT A PHYSICAL ADDRESS
HRLI T1,IRMWRD ;INSERT WORD MODE
HRRZ T3,CDBDSP(P1) ;GET DISPATCH BASE
CALL CDSCCW(T3) ;BUILD CCW INTO T1
MOVEM T1,CCWLST(P4) ;STORE AS FIRST WORD OF CCW LIST
SETZM CCWLST+1(P4) ;CLEAR SECOND WORD OF CCW LIST
MOVE T1,P4 ;SETUP REGS FOR PHYSIO
MOVE T2,P3
RETSKP ;AND RETURN SUCCESS
NOPGS: PION ;ALLOW PI
CALL CLENUP ;RELEASE RESOURCES
JRST RETZ ;AND RETURN
IOSETU: CALL QUECMD ;SAVE COMMAND ON QUEUE
IOUNIT: CALL FNDUNN ;FIND UNIT. NO STEPPING ALLOWED
JRST NOUNIT ;NONE
CALL CHKOFL ;OFFLINE?
JRST IOUOFL ;YES
MOVE P5,.SVCID(Q3) ;GET CID INDEX
LOAD P5,SID,P5
MOVE T1,UDBCHR(P3) ;GET UDB CHARACTERISTICS
TDNN T1,BITS+<^D36-CFSNUM>(P5) ;IS UNIT ONLINED BY DRIVER
JRST IOUAVA ;NO. UNIT IS AVAILABLE
RETSKP ;ALL IS OK
NOUNIT: SETZM P.UNIT(Q1) ;NO UNIT AND OFFLINE
IOUOFL: SKIPA T1,[ST.OFL] ;OFFLINE
IOUAVA: MOVX T1,ST.AVL ;AVAILABLE
STKVAR <ERRBIT>
MOVEM T1,ERRBIT ;SAVE ERROR BITS
CALL CLENUP ;FREE RESOURCES
MOVE T1,ERRBIT ;GET THEM BACK
MOVEI T3,P%FBBK ;LENGTH
JRST BADCM0 ;TREAT AS BAD COMMAND
;CHKOFL - CHECK FOR UNIT OFFLINE
;
; THIS ROUTINE CHECKS FOR A UNIT OFFLINE. IN THIS CASE OFFLINE MEANS
; ONE OF THE FOLLOWING:
; 1. CAHNNEL IS CS.OFL
; 2. UNIT IS NOT MSCP ONLINE AND IS US.OFS
;
; NOTE: IF A UNIT IS MSCP ONLINE AND US.OFS THEN THE US.OFS IS TREATED
; A TRANSIENT OFFLINE CONDITION AND THE DRIVE IS NOT CONSIDERED
; REALLY OFFLINE. THIS MAY BE CHANGED IF US.OFS IS CHANGED TO
; MEAN OFFLINE INTERRUPT OCCURRED OR DRIVE WAS NEVER ONLINE.
; CURRENTLY US.OFS GETS SET WHEN A DUAL PORTED DRIVE IS BEING
; ACCESSED BY ANOTHER SYSTEM.
;
CHKOFL: SAVEAC <T2,T3>
MOVE T2,UDBSTS(P3) ;GET UNIT STATUS
MOVE T3,CDBSTS(P1) ;AND CHANNEL STATUS
TXNE T3,CS.OFL ;CHANNEL OFFLINE?
RET ;YES, FAILURE
MOVE T3,.SVCID(Q3) ;GET CID INDEX
LOAD T3,SID,T3
MOVE T3,BITS+<^D36-CFSNUM>(T3) ;GET ONLINE BIT FOR THIS CONNECTION
TDNN T3,UDBCHR(P3) ;IS UNIT ONLINED BY DRIVER
TXNN T2,US.OFS ;NO, IS IT CURRENTLY OFFLINE?
RETSKP ;MSCP ONLINE OR REALLY ONLINE
RET ;NEITHER, FAIL
;GETWD - GET WRITE DATA FROM OTHER SYSTEM. REQUEST DATA FOR A WRITE OPERATION
; Q1/ COMMAND
; Q3/ SCDB
; CALL GETWD ;(Q1,Q3/)
; RETURNS +1: ALWAYS
;
GETWD: MOVX T1,STWRB ;WAITING TO REQUEST BUFFER
STOR T1,QCSTS,(Q1) ;SAVE STATUS
; CALLRET REQDAT ;FALL INTO REQDAT
;REQDAT - REQUEST DATA FROM REMOTE SYSTEM
; Q1/ COMMAND
; Q3/ SCDB
; CALL REQDAT ;(Q1,Q3/)
; RETURNS +1: ALWAYS
;
REQDAT: LOAD T1,QCSTS,(Q1) ;GET COMMAND STATUS
CAIE T1,STWRB ;IS STATE "WAITING TO REQUEST BUFFER"?
CAIN T1,STWRR ;OR WAITING TO REQUEST (RETRY)
SKIPA ;YES. OK
CALL ILSTAT ;NO. DIE
MOVE T1,P.BUFF+1(Q1) ;GET BUFFER NAME
CALL REVFUL
BLCAL. (SC.RQD,<.SVCID(Q3),T1,.QCDBD(Q1),[0],[0]>) ;[7.1037]GET DATA
SCAERR <JRST REQERR>
MOVX T1,STWRD ;WAITING FOR RECIEPT OF DATA
STOR T1,QCSTS,(Q1) ;SAVE STATUS
RET
SNDDAT: LOAD T1,QCSTS,(Q1) ;GET COMMAND STATUS
CAIE T1,STWSB ;IS STATE "WAITING TO SEND BUFFER"?
CAIN T1,STWSR
SKIPA ;STATE IS OK.
CALL ILSTAT ;NO. DIE
MOVE T1,P.BUFF+1(Q1)
CALL REVFUL
BLCAL. (SC.SND,<.SVCID(Q3),.QCDBD(Q1),T1,[0],[0]>)
SCAERR <JRST SDDERR> ;DATA IO ERROR
MOVX T2,STWSD ;WAITING FOR SEND COMPLETE
STOR T2,QCSTS,(Q1) ;SAVE STATUS
RET
;HERE WHEN A NAMED BUFFER XFR FAILS - CURRENT STATUS IS SETUP TO PREVENT RETRY
SDDERR: SKIPA T2,[STWSR] ;WAITING TO SEND (RETRY)
REQERR: MOVX T2,STWRR ;WAITING TO REQUEST (RETRY)
CAIN T1,SCSNEC ;NOT ENOUGH CREDIT?
RET ;ALL OK. WE WILL GET A CALLBACK
CAIE T1,SCSNBA ;NO BUFFER?
CALLRET SNDSHT ;NO, UNKNOWN ERROR CLOSE THE CONNECTION
STOR T2,QCSTS,(Q1) ;SAVE RETRYABLE STATUS
RET ;RETURN
;GETEBF - GET END PACKET BUFFER FOR COMMAND IN Q1
; Q1/ COMMAND
; CALL GETEBF ;(Q1/Q2)
; RETURNS +1: FAILURE, COMMAND QUEUED
; +2: SUCCESS, END PACKET ADDRESS IN Q2
; COMMAND REFERENCE NUMBER STORED IN END PACKET
;
GETBF: SAVEAC <Q1> ;ENTRY TO GET A BUFFER FOR A NON-END USE
SETZ Q1, ;FLAG NO COMMAND
GETEBF: MOVEI T1,1
CALL SC.ABF ;GET A PACKET BUFFER
SCAERR <CALLRET QUECHK>;[8984] Can't queue old command (Q1/)
MOVE T4,T3 ;REMEMBER RETURN ADDRESS FOR BUFFER
MOVE Q2,T1 ;SAVE ITS ADDRESS
MOVE T2,Q2 ;GET READY
SUBI T2,C%BINV ; TO BLT
MOVE T3,T2 ; ZEROS
AOS T3
MOVX T1,<C%BINV+C%MGSZ>-1 ;NUMBER OF WORDS TO ZERO
SETZM (T2) ;ZERO THE FIRST WORD
EXTEND T1,[XBLT] ;ZERO THE BUFFER
AOS T1,SVPKIU ;COUNT PACKETS IN USE
CAMLE T1,SVMKIU ;MAX?
MOVEM T1,SVMKIU ;YES
MOVEM T4,.QCRTN(Q2) ;SAVE WHERE TO RETURN THE BUFFER
SKIPE T1,Q1 ;IS THERE A CRF?
MOVE T1,P.CRF(Q1) ;YES, GET COMMAND REFERENCE NUMBER FROM COMMAND
MOVEM T1,P.CRF(Q2) ;SAVE IN END PACKET
RETSKP ;GOOD RETURN
ENDRTY: LOAD T1,QCSTS,(Q1) ;GET STATUS
CAIE T1,STWSE ;WAITING FOR THIS
CALL ILSTAT ;NO. DIE
CALL GETEBF ;GET A BUFFER FOR END
RET
MOVE T2,Q1
MOVE T3,Q2
LOAD T1,QCENL,(Q1) ;GET END PACKET LENGTH
EXTEND T1,[XBLT] ;MOVE DATA
MOVE T1,P.STS(Q1) ;GET STATUS
CALL REVFUL
TXO T1,OP.END ;ADD END STATUS
CALL REVFUL
MOVEM T1,P.STS(Q2) ;SAVE
LOAD T3,QCENL,(Q1) ;GET LENGTH
; CALLRET SNDEND
SNDEND: STOR T3,QCENL,(Q1) ;SAVE SIZE OF MESSAGE IN CASE SEND FAILS
MOVX T1,STWSE ;STATUS IS WAITING TO SEND END
STOR T1,QCSTS,(Q1) ;SAVE IT
IFN DEBUG,< CALL SCPAK
>
BLCAL. (SC.SMG,<.SVCID(Q3),[0],T3,Q2,[MVRPRI],[0],[0]>) ;SEND THE PACKET
SCAERR <JRST SNDERR> ;SEND ERROR
AOS SVSEND ;[7211] COUNT THE SEND
SOS SVPKIU ;COUNT PACKETS IN USE
CALLRET RTNCMD ;SEND OK RETURN COMMAND
;
; HERE IF THE SEND FAILED. FIND OUT WHY AND DO SOMETHING ABOUT IT
;
SNDERR: MOVE T3,T1
MOVE T1,.SVCID(Q3)
CALL SC.NOD
CAIE T3,SCSNEC ;NOT ENOUGH CREDIT?
SNDSHT: BUG.(INF,MSSSBD,PHYMVR,SOFT,<Send failed>,<<T2,NODE>,<T1,CID>,<T3,ERROR>>,<
Cause: A send of a message failed for an unexpected reason. The connection
is shut down.
Action: If this bug occurs often or is reproducible, set it dumpable and
submit an SPR along with a dump and instructions on reproducing it.
Data: NODE - node number
CID - connect ID
ERROR - SCA error code
>,MSSFSD) ;UNEXPECTED ERROR SHUTDOWN AND RESYNC
CALL QUECMD ;THIS COMMAND MUST BE RETRIED
MOVE T2,Q2 ;GET END ADDRESS
MOVE T3,Q1 ;AND COMMAND ADDRESS
MOVEI T1,C%MGSZ ;SIZE OF A MESSAGE
EXTEND T1,[XBLT] ;SAVE END PACKET IMAGE
RTNEND: MOVE T1,Q2 ;RETURN END PACKET BY HAND SINCE SEND FAILED
SOS SVPKIU ;COUNT PACKETS IN USE
CALLRET @.QCRTN(Q2)
IFN DEBUG,<
;SCPAK - SANITY CHECK OUTGOING MESSAGE
;
SCPAK: CAIL T3,P%OPCD ;LENGTH GOOD?
CAILE T3,P%RCTC
CALL BADPAK
SKIPN P.CRF(Q2) ;HAVE A CRF?
CALL BADPAK
MOVE T1,P.STS(Q2) ;STATUS
CALL SRVFUL
LDB T1,LOBYT ;GET STATUS ONLY!
TXZN T1,OP.END ;END?
CALL BADPAK
SKIPN T1 ;SOMETHING ELSE TOO
CALL BADPAK
SKIPN Q2 ;REALLY ANYTING TO SEND
CALL BADPAK
RET
BADPAK: BUG.(HLT,MSSNUT,PHYMVR,SOFT,<MSCP server send sanity check failed>,,<
Cause: Unknown should never happen. Examine the dump to determine the
problem.
>)
>
;CLENUP - CLEANUP COMMAND RESOURCES
; Q1/ COMMAND
;
CLENUP: SAVET ;PRESERVE ALL ACS
SKIPN .QCIORB(Q1) ;ANYTHING?
RET ;NO.
SKIPN T1,.QCPID(Q1) ;GET PAGE PTN.PN AND MAKE SURE PAGE EXISTS
JRST CLENU2 ;NO PAGE PROCEED
SOS SVIPIU ;COUNT PAGES USED
LOAD T2,CSTAGE,+T1 ;GET AGE FIELD
CAIE T2,PSIOP ;IS IT ON QUEUE NOW?
JRST [ MOVX T1,ST.DAT ;SET DATA ERROR
CALL REVFUL
IORM T1,P.STS(Q1)
JRST CLENU2] ;AND CONTINUE
MOVEI T2,PSSPQ ;SET PAGE STATE TO ON SPMQ
STOR T2,CSTAGE,+T1 ; ...
CALL OFFSPQ ;TAKE IT OFF SPMQ
SETZ T1,
EXCH T1,.QCPID(Q1) ;GET PAGE SAY NO PAGE
MOVX T3,PSTAVL ;SET SPECIAL PAGE STATE TO AVAILABLE
STOR T3,CSTPST,+T1 ; ...
SKIPG NRPLQ ;ANY PAGES BEFORE THIS?
CALL MSSCZK ;NO, MAKE SCHED KNOW TO RUN US SOON
CALL OFRQ ;AND PLACE IT ON RPLQ
CLENU2: SETZ T1,
EXCH T1,.QCDBD(Q1) ;MARK NO BUFFER
JUMPE T1,CLENU1 ;MAY BE NO BUFFER
BLCAL. (SC.UMP,<T1>) ;UNMAP BUFFER
SCAERR <BUG.(CHK,MSSUMP,PHYMVR,SOFT,<Unmap buffer failed>,<<T1,REASON>>,<
Cause: A routine was called to unmap a buffer and failed when it should not
have.
Action: If this bug occurs often or is reproducible, set it dumpable and
submit an SPR along with a dump and instructions on reproducing it.
Data: REASON - error code
>,CLNUME)>
SETZ T1,
CLENU1: EXCH T1,.QCIORB(Q1) ;MARK COMMAND AS HAVING NO IORB AND GET IORB
SKIPN SVIRBH ;WERE THERE ANY IORBS BEFORE WE RETURNED THIS?
CALL MSSCZK ;NO, MAKE SCHED KNOW ABOUT US SOON
EXCH T1,SVIRBH ;MAKE THIS HEAD
MOVEM T1,@SVIRBH ;AND POINT TO NEXT
RET
CLNUME: MOVX T1,ST.DAT ;SET DATA ERROR
CALL REVFUL
IORM T1,P.STS(Q1)
SETZ T1, ;AND CONTINUE
JRST CLENU1
;SUBROUTINE TO FIND THE COMMAND
; T1/ COMMAND REFERENCE NUMBER
; Q3/ SCDB ADDRESS
; RETURNS +1: NOT FOUND
; +2: T1/ ADDRESS OF COMMAND
;
FNDCMD: SKIPN T2,.SVCMD(Q3) ;ANY COMMANDS?
RET ;NO
FNDCM1: CAMN T1,P.CRF(T2) ;SAME COMMAND
JRST [MOVE T1,T2 ;YES
RETSKP] ;AND RETURN SUCCESS
SKIPE T2,.QCNXT(T2) ;GET NEXT
JRST FNDCM1
RET
;BYTE SWAP ROUTINES
;REVW2 - REVERSE 36 BIT WORD TO BE SENT AS 32 BIT WORD
;REVWF - REVERSE 32 BIT WORD INTO 36 BIT WORD
REVW2: LSH T1,4 ;POSITION IN 32 BITS
CALLRET REVFUL ;SWAP
REVWF: CALL REVFUL ;SWAP
LSH T1,-4 ;AND MAKE IT FIT IN REAL SIZED WORDS
RET
;SETQ3 - SETUP POINTER TO SERVER CONNECTION DATA BLOCK (SCDB)
; T2/ CID
; CALL SETQ3 ;(T2/Q3)
;SETQ3I - SETUP POINTER TO SCDB USING INDEX IN Q3
; Q3/ CID INDEX
; CALL SETQ3I ;(Q3/Q3)
; RETURNS +1: NO SCDB FOR CID
; +2: SUCCESS, Q3 HAS ADDRESS OF SCDB
;
SETQ3: LOAD Q3,SID,T2 ;GET CID INDEX
SETQ3I: SKIPN Q3,SCDBTB(Q3)
RET
RETSKP
;
; BUGHLTS USED BY VARIOUS PIECES OF PHYMVR
;
SCDBBG: MOVE T1,T2
CALL SC.NOD
BUG.(HLT,MSSCID,PHYMVR,SOFT,<Illegal connect ID index>,<<T2,NODE>,<T1,CID>>,<
Cause: The MSCP server cannot locate a SCDB for the given connect ID.
Action: If this bug occurs often or is reproducible, set it dumpable and
submit an SPR along with a dump and instructions on reproducing it.
Data: NODE - node number
CID - connect ID
>)
RET
ILLFCN: BUG.(HLT,MSSSCA,PHYMVR,SOFT,<MSCP SERVER - Server detected SCA error>,<<T1,SCAFNC>,<T2,ARG1>,<T3,ARG2>,<T4,ARG3>>,<
Cause: The MSCP server detected an illegal response from SCA.
Data: SCAFNC - SCA function code
ARG1 - ARG3 - SCA function arguments
>)
ILSTAT: BUG.(HLT,MSSSTA,PHYMVR,SOFT,<MSCP SERVER - Illegal state>,,<
Cause: The MSCP server detected an illegal command or connection state.
>,R)
;SUBROUTINE TO FIND SPECIFIED UNIT OR NEXT UNIT NUMBERED HIGHER
; T1/MSCP UNIT NUMBER
;
;RETURNS:
; +1 FAILED
; T1 = 0 INVALID UNIT (OUT OF RANGE)
; = ST.OFL OFFLINE
; +2 SUCCESS
; T1 = NEW UNIT NUMBER
; P1-P3 CHANNEL, KONTROLLER, UNIT
;
FNDUNT: MOVE T1,P.MOD(Q1) ;GET COMMAND MODIFIERS
CALL REVFUL
TXNE T1,MD.NXU ;NEXT UNIT MODIFIER SET
TDZA T1,T1 ;YES ALLOW STEPPING
FNDUNN: SETO T1, ;NO STEPPING ALLOWED
STKVAR <STPFLG,CHANN,KONTN,UNITN>
MOVEM T1,STPFLG ;SAVE ENTRY FLAG
MOVE T1,P.UNIT(Q1) ;GET UNIT NUMBER
CALL REVWF ;IN NORMAL FORMAT
SOS T1 ;MAKE IN RANGE 0-MAXUNN
CAILE T1,MAXUNN ;GREATER THAN MAX UNIT
JRST [SETZ T1,
RET]
IDIVI T1,CHNCOD ;GET CHANNEL AND KONTROLLER
IDIVI T2,KONCOD ;KONTROLLER AND UNIT
SOS T2 ;MAKE KONT BE IN RANGE -1:7
MOVEM T1,CHANN ;SAVE DATA
MOVEM T2,KONTN ; FOR STEPPING
MOVEM T3,UNITN ; LATER
CALL CHKCKS ;VALID?
JRST FNDSTU ;NOPE TRY TO STEP.
MOVE P3,T1 ;UDB
FNDUN1: HRRZ P2,UDBKDB(P3) ;SET UP KDB POINTER
HRRZ P1,UDBCDB(P3) ;AND CDB POINTER
CALL FNDCKS ;GET NUMBERS
MOVEM T1,CHANN ;SAVE THEM
MOVEM T2,KONTN
MOVEM T3,UNITN
MOVE T1,UDBSTS(P3) ;GET FLAGS
TXNN T1,US.CIP ;A CI DEVICE?
TXNN T1,US.DSK ;A DISK?
JRST FNDSTU ;CI OR NON DISK, STEP
TXNN T1,US.CIA ;AVAILABLE?
JRST FNDSTU ;NO AND DEFAULT REFUSE STEP
MOVE T1,CHANN ;FOUND ONE GET NUMBERS
MOVE T2,KONTN
MOVE T3,UNITN
CALL MSCUNT ;GET MSCP UNIT NUMBER (T1,T2,T3/T1)
CALL ILSTAT
RETSKP
FNDSTU: MOVX T1,ST.OFL ;READY FOR OFFLINE
SKIPE STPFLG ;STEPPING?
RET ;NO. FAILURE
MOVE T1,CHANN ;GET PREVIOUS C
MOVE T2,KONTN ; K
MOVE T3,UNITN ; AND U
CALL ADVCKS ;STEP
JRST RETZ ;NONE
MOVE P3,T4 ;UDB
JRST FNDUN1 ;FOUND IT CHECK IT OUT
;******
MSCUNT: CAILE T1,MAXCNT ;TOO BIG
RET
AOS T2
CAILE T2,MAXKNT ;TOO BIG
RET
CAILE T3,MAXUNT ;TOO BIG
RET
IMULI T1,CHNCOD ;CONVERT CHANNEL KONTROLLER UNIT TO MSCP UNIT
IMULI T2,KONCOD ;KONTROLLER
ADD T1,T2 ;ADD KONTROLLER
ADD T1,T3 ;ADD UNIT
AOS T1 ;MAKE IN RANGE 1-MAXUNN
RETSKP
SWAPCD
;MSSRED - TMON FUNCTION - .SFMSD
; T2/ ADDRESS OF ARGUMENT BLOCK
;
; MOVEI 1,.SFMSD
; MOVE 2,<address of block>
; TMON%
;
; RETURNS +1 ALWAYS
; T2/ 1 - DRIVE IS AVAILABLE THROUGH THE MSCP SERVER
; T2/ 0 - DRIVE IS UNAVAILABLE
;
MSSRED::JE SVSINF,,[ITERR(MSCPX4)] ;NOT INITIALIZED
UMOVE T1,.SVCNT(T2) ;GET SIZE OF THE BLOCK
CAIGE T1,.SVDSN+1 ;BIG ENOUGH?
ITERR(ARGX04) ;NO.
CALL FNDSER ;FIND THE DRIVE
SETZ T1, ;ASSUME UNAVAILABLE
MOVE T2,UDBSTS(T4) ;GET STATUS
TXNE T2,US.CIA ;AVAILABLE?
MOVEI T1,1 ;YES
RET ;ALL DONE
;MSSMRK - SMON FUNCTION - .SFMSD - MARK SERVER DISKS
; T2/ ADDRESS OF ARGUMENT BLOCK
;
; MOVEI 1,.SFMSD
; MOVE 2,<address of block>
; SMON%
;
; RETURNS +1: ALWAYS, UNIT UNAVAILABLE OR NOT FOUND
;
MSSMRK::JE SVSINF,,[ITERR(MSCPX4)] ;IF NOT INITIALIZED REPORT NO SERVER
UMOVE T1,.SVCNT(T2) ;GET SIZE OF THE BLOCK
CAIGE T1,.SVDSN+1 ;BIG ENOUGH?
ITERR(ARGX04) ;NO.
UMOVE T1,.SVTYP(T2) ;GET FLAGS
TXNN T1,SV%DDU ;SETTING UNAVAILABLE?
JRST MSSSRV ;NO, AVAILABLE.
CALL FNDSER ;FIND DISK UDB FOR THIS SERIAL NUMBER
MOVX T1,US.CIA ;CLEAR AVAILABLE BIT
ANDCAM T1,UDBSTS(T4)
RET
; HERE TO MARK DISK AVAILABLE
MSSSRV: CALL FNDSER ;GET DISK
MOVX T1,US.CIA ;SET AVAILABLE BIT
IORM T1,UDBSTS(T4)
NOINT
CALLRET MSXATA ;TELL THE WORLD
;FNDSER - FIND A UNIT BY SERIAL NUMBER
;
; T2/ ADDRESS OF USERS ARGUMENT BLOCK FOR SMON JSYS
; RETURN
; CALL FNDSER ;(T2/T4)
FNDSER: SAVEQ
STKVAR <DSH,DSN> ;HIGH AND LOW ORDER SERIAL NUMBERS
UMOVE T3,.SVDSH(T2) ;GET SERIAL NUMBER (HIGH)
UMOVE T4,.SVTYP(T2) ;GET TYPE AND FLAGS
TXZ T4,SV%DDU ;CLEAR FLAGS
TXO T4,400 ;DISK TYPE 144
LSH T4,20 ;POSITION IT
CAME T4,T3 ;MATCH?
ITERR(MSCPX2) ;NO, DRIVE TYPE ERROR
MOVEM T3,DSH ;OK. SAVE IT
UMOVE T3,.SVDSN(T2) ;GET DSN
MOVEM T3,DSN ;SAVE IT
SETOB Q1,Q3 ;NO CHANNEL NO UNIT START WITH FIRST
SETZ Q2,
SERNXT: DMOVE T1,Q1 ;GET SAVED VALUES
MOVE T3,Q3
CALL ADVCKS ;GET UNIT
ITERR(MSCPX3) ;NONE. DRIVE NOT FOUND
DMOVE Q1,T1
MOVE Q3,T3 ;SAVE LATEST VALUES
MOVE T1,UDBSTS(T4) ;GET BITS
TXNN T1,US.DSK ;A DISK?
JRST SERNXT ;NON DISK IS NO GOOD
MOVE T2,UDBDSN(T4) ;GET SERIAL NUMBER
CAME T2,DSN ;SAME ONE?
JRST SERNXT ;NO
MOVE T2,UDBDSH(T4) ;YES, NOW CHECK
TXNN T1,US.CIP ;A CI DEVICE?
CAME T2,DSH ;IS IT THE SAME?
ITERR(MSCPX2) ;NOT SAME OR CI, DRIVE TYPE ERROR
RET
RESCD
;MSSONL - MSCP SERVER STUB OF DISK ONLINE
;ENTER HERE FROM PHYSIO TO BROADCAST THE UNIT STATUS IF THE UNIT IS AVAILABLE
;IF NOT FLAG JOB 0 TO RUN SETSPD AND DO BROADCAST LATER IF IT GETS SET
;AVAILABLE
; P3/ UDB
;
; CALL MSSONL ;(P3/)
;
; RETURNS +1: ALWAYS
;
MSSONL::EA.ENT ;RUN IN 1
MOVE T1,UDBSTS(P3) ;GET BITS
TXNE T1,US.DSK ;A DISK?
TXNE T1,US.CIP ;CI DISK
RET ;NOT A DISK OR CI DISK, IGNORE IT
MOVE T4,P3 ;READY TO CALL BROADCAST
TXNE T1,US.CIA ;CI AVAILABLE ALREADY!
CALLRET MSXATA ;NO. TELL THE WORLD (T4/)
AOS JB0FLG ;RUN JOB 0
AOS MTAJB0 ;AT NEW MTA AND DISK ENTRY POINT
RET
;MSSOFL - MSCP SERVER STUB OF DISK OFFLINE
;
MSSOFL::MOVE T1,UDBSTS(P3)
TXNN T1,US.DSK ;A DISK
RET ;NO FORGET IT
MOVX T1,UC.OLB ;GET ONLINE BITS
ANDCAM T1,UDBCHR(P3) ;CLEAR THEM
RET
;MSXATA - UNIT AVAILABLE BROADCAST
;CALLED FROM .SMON CODE WHEN A UNIT IS SET CI AVAILABLE OR FROM PERIODIC
;CHECK IF FIRST BROADCAST DID NOT WORK
; T4/ UDB
; CALL MSXATA ;(T4/)
; RETURNS +1: ALWAYS
;
MSXATA: SAVEPQ ;PRESERVE THESE
AOS SVBDKN ;BROADCAST COUNT
MOVE P3,T4 ;PHYSIO CALLING CONVENTIONS
MOVE P2,UDBKDB(P3)
MOVE P1,UDBCDB(P3)
MOVX T1,US.BDK ;REMEMBER. BROADCAST IS NEEDED
IORB T1,UDBSTS(P3) ; UNTIL WE ARE DONE
TXNN T1,US.DSK ;A DISK
JRST ATADOK ;NO. FORGET IT
MOVE T2,CDBSTS(P1) ;AND CHANNEL STATUS
TXNN T1,US.OFS ;UNIT OFFLINE?
TXNE T2,CS.OFL ;OR CHANNEL OFFLINE?
JRST ATADOK ;YES, DON'T BOTHER
SETZ P4, ;NO PROBLEMS YET
MOVSI Q1,-CFSNUM ;NUMBER OF NODES TO BROADCAST TO
SKIPA ;DON'T DECREMENT INITIAL BUFFER COUNT
ATALUP: SOS SVCMIU ;GETTING A NEW BUFFER. KEEP COUNT
CALL GETBF ;GET A BUFFER
RET ;CANNOT
CALL FNDCKS ;GET C K U
CALL MSCUNT ;CONVERT TO MSCP FORMAT
CALL ILSTAT ;FATAL ERROR! SHOULD NEVER HAPPEN
CALL REVW2
MOVEM T1,P.UNIT(Q2) ;SAVE UNIT NUMBER
MOVX T1,OP.AVA ;OPCODE
CALL REVFUL
MOVEM T1,P.OPCD(Q2)
SETZ T1, ;SETUP UNIT INFO
CALL SETUI0
JFCL
ATALU1: SKIPN Q3,SCDBTB(Q1) ;GET ADDRESS OF SCDB
JRST ATANXT ;NOT USED
LOAD T1,SVSTA,(Q3) ;GET CONNECTION STATE
MOVE T2,.SVCIS(Q3)
CAIN T1,SCOKS ;OK TO SEND?
TXNN T2,MC.ATN ;WANT ATTENTION MESSAGES?
JRST ATANXX ;SHUTDOWN OR NO ATTENTION MESSAGES SKIP IT
MOVE T1,.SVCID(Q3) ;GET CID INDEX
LOAD T1,SID,T1
MOVE T2,UDBCHR(P3) ;AND UDB CHARACTERISTICS
TDNE T2,BITS+<^D36-CFSNUM>(T1) ;ONLINE ALREADY?
JRST ATANXX ;YES DO NEXT
BLCAL. (SC.SMG,<.SVCID(Q3),[0],[P%RCTC],Q2,[MVRPRI],[0],[0]>) ;SEND THE PACKET
SCAERR <SETO P4,> ;REMEMBER ERROR
AOS SVSEND ;[7211] COUNT THE SEND
SKIPN P4 ;ERROR
SETZ Q2, ;SENT MESSAGE OK. DON'T RETURN BUFFER
ATANXT: SKIPN Q3 ;STILL LOOKING FOR A BLOCK?
ATANXX: AOBJN Q1,ATALU1 ;YES. DON'T NEED A BUFFER TO LOOP
AOBJN Q1,ATALUP ;DID ONE, TRY MORE AND GET A BUFFER
SKIPE Q2 ;NEED TO RETURN BUFFER?
CALL RTNEND ;YES.
JUMPN P4,R ;PROBLEMS TRY AGAIN LATER.
ATADOK: MOVX T1,US.BDK ;ALL OK. CLEAR BROADCAST NEEDED
ANDCAM T1,UDBSTS(P3)
SOS SVBDKN ;ALL DONE WITH THIS UNIT
RET
;QUECMD - ADD A COMMAND TO THE QUEUE
; Q1/ COMMAND
; Q3/ SCDB
; CALL QUECMD ;(Q1,Q3/)
; RETURNS +1 ALWAYS
;[8984] Nota bene - Routine GETBF calls QUECHK when SCA buffer allocation
;fails. This routine does not set up Q1 (zeroes it) because there is no
;command associated with it. This is done when the system is trying to
;tell other nodes about disks that it is onlining. QUECHK will exit stage
;left immediately if we are coming from ATALUP (and through GETBF). ATALUP
;handles the SCA buffer allocation failure and deferes the send till a later,
;more convenient time.
QUECHK: JUMPE Q1,R ;[8984] If no command, then done
QUECMD: JN MSCOQ,(Q1),R ;IF ALREADY QUEUED JUST RETURN
SETONE MSCOQ,(Q1)
MOVE T1,[MSEC1,,RTNQCE] ;GET RETURN ADDRESS FOR QUEUED COMMANDS
EXCH T1,.QCRTN(Q1) ;SAVE NEW ADDRESS GET OLD ONE
MOVEM T1,.QCRT2(Q1)
SETZM .QCNXT(Q1) ;ZERO LINK
SKIPE T2,.SVCME(Q3) ;ADDRESS OF TAIL
MOVEM Q1,.QCNXT(T2) ;POINT TAIL TO THIS
MOVEM T2,.QCLST(Q1) ;AND POINT THIS AT TAIL
MOVEM Q1,.SVCME(Q3) ;THIS IS NOW TAIL
SKIPN T2 ;WERE THERE ANY?
MOVEM Q1,.SVCMD(Q3) ;NO. THIS IS THE FIRST TOO
MOVE T1,TODCLK ;COMPUTE NEXT TIMEOUT INTERVAL
ADDI T1,SVRTMI
MOVEM T1,.QCTMO(Q1) ;AND SAVE IT
RET
;RTNQCE - RETURN QUEUED COMMAND
; T1/ COMMAND
; Q3/ SCDB ADDRESS
;
RTNQCE: SAVEAC <Q1> ;ALL OTHER ROUTINES EXPECT COMMAND IN Q1
MOVE Q1,T1 ;SO DON'T DISAPOINT THEM
MOVX T2,MS.COQ ;GET QUEUED BIT
TDNN T2,.QCSTS(Q1) ;REALLY QUEUED?
CALL ILSTAT ;NO! ILLEGAL STATE
ANDCAM T2,.QCSTS(Q1) ;YES, CLEAR BIT WE ARE DEQUEUEING NOW
CALL CLENUP ;CLEANUP EXTRANEOUS JUNK IF ANY
MOVE T2,.QCLST(T1) ;GET PREVIOUS
SKIPE T3,.QCNXT(T1) ;AND NEXT IF ANY
MOVEM T2,.QCLST(T3) ;POINT NEXT AT PREV
SKIPE T2 ;PREVIOUS EXIST?
MOVEM T3,.QCNXT(T2) ;YES. POINT PREV AT NEXT
CAMN T1,.SVCME(Q3) ;LAST ENTRY?
MOVEM T2,.SVCME(Q3) ;YEP MAKE PREVIOUS LAST
CAMN T1,.SVCMD(Q3) ;FIRST ENTRY?
MOVEM T3,.SVCMD(Q3) ;YEP MAKE NEXT FIRST
JRST @.QCRT2(T1) ;RETURN BUFFER
;RTNCMD - RETURN COMMAND BUFFER
; Q1/ COMMAND
; Q3/ SCDB ADDRESS
; CALL RTNCMD ;(Q1,Q3/)
RTNCMD: MOVE T1,Q1 ;RETURN ROUTINES WANT BUFFER ADDRESS IN T1
SOS SVCMIU ;COUNT PACKETS IN USE
CALLRET @.QCRTN(T1) ;RETURN THE PACKET BUFFER
;ABTEND - SEND END PACKET FOR ABORTED COMMAND
;ABTEN0 - ENTRY FOR COMMAND ADDRESS IN Q1 (RETRYING QUEUED COMMANDS)
; T1/ COMMAND BEING ABORTED (ABTEND ONLY)
; Q3/ SCDB ADDRESS
; CALL ABTEND ;(T1,Q3/)
; RETURNS +1: ALWAYS, END SENT OR COMMAND ON QUEUE
;
ABTEND: SAVEQ
MOVE Q1,T1 ;GET COMMAND BEING ABORTED IN CORRECT PLACE
ABTEN0: CALL CLENUP ;RELEASE ANY RESOURCES NOW
CALL GETEBF ;GET A END PACKET BUFFER FOR ABORTED COMMAND
RET ;CAN'T COMMAND IS FLAGGED AS ABORTED
MOVE T1,P.UNIT(Q1) ;GET UNIT NUMBER FROM ABORT COMMAND
MOVEM T1,P.UNIT(Q2) ;SAVE IN END PACKET
MOVE T1,P.STS(Q1) ;GET STATUS, OPCODE
CALL REVFUL
TXO T1,ST.ABO!OP.END ;ADD ABORTED AND END TO STATUS
CALL REVFUL
MOVEM T1,P.STS(Q2) ;SAVE IN PACKET
MOVEI T3,P%STS
CALLRET SNDEND ;SEND END PACKET
;SET UNIT ID INFORMATION IN MESSAGE
;
SETUID: MOVE T1,P.UNFL(Q1) ;GET FLAGS
CALL REVFUL ;IN CORRECT FORMAT
TXZE T1,UF.CMR+UF.CMW+UF.INA+UF.WPS ;ANY UNSUPPORTED FLAGS?
JRST [BADCMV P.UNFL
RET] ;RETURN ERROR
TXZ T1,UF.SCH+UF.SCL+UF.WBN
SETUI0: TXO T1,UF.576+UF.RMV ;ALL DISKS HAVE 576 BYTE SECTORS MOST ARE REMOVABLE
MOVE T2,UDBSTS(P3) ;GET STATUS FLAGS
TXNE T2,US.WLK ;WRITE LOCKED
TXO T1,UF.WPS+UF.WPH ;YES SAY SO
LOAD T2,USTYP,(P3) ;GET DISK TYPE
CAIE T2,.UTRP7 ;RP07 AND
CAIN T2,.UTP20 ;RP20 ARE
TXZ T1,UF.RMV ;NON REMOVABLE
CALL SRVFUL
MOVEM T1,P.UNFL(Q2) ;SAVE FLAGS
MOVE T1,T2 ;GET MEDIA TYPE
CALL REVW2 ;REVERSED
MOVEM T1,P.MEDI(Q2) ;SAVE IT
MOVE T1,UDBDSN(P3) ;SAVE SERIAL NUMBER
CALL REVW2
MOVEM T1,P.UNTI(Q2)
MOVE T1,UDBDSH(P3) ;STORE HIGH ORDER SERIAL NUMBER
CALL REVW2
MOVEM T1,P.UNTI+1(Q2)
RETSKP
SUBTTL CFS Interface
;SRVCFS - CALLED BY CFS WHEN A LISTNER CAN BE OFFERED
;
SRVCFS::SETONE SVSLIS
RET
;MSSSVD - CALLED BY "SYSTEM GOING DOWN" CODE TO SEE IF THERE ARE ANY
;SERVED DISKS
; CALL MSSSVD ;(/)
; RETURN +1: NO SERVED DISKS
; +2: AT LEAST 1 SERVED DISK
MSSSVD::SKIPGE SVSLSX ;IS THERE A LISTENER?
RET ;NO
TRVAR <SVD>
SETZM SVD ;START WITH NO SERVED UNITS
MOVEI P4,CHNTAB ;CHECK ALL CHANNELS
MSSSVL: CAIL P4,CHNTAB+7 ; EXCEPT CI. DONE?
RET ;YES, DIDN'T FIND ANY SERVED UNITS
SKIPN P1,(P4) ;NO, IS THERE A CDB?
IFSKP.
CALL DGUMAP ;(P1/) YES, LOOP OVER ALL UNITS ON CHANNEL
CALL MSSSVC ;(P3/) CHECK FOR ONLINED BY SERVER
SKIPE SVD ;FOUND ANY YET?
RETSKP ;YES
ENDIF.
AOJA P4,MSSSVL ;NO, CHECK NEXT CHANNEL
;MSSSVC - COROUTINE OF MSSSVD, CALLED FOR EACH UDB FOUND BY DGUMAP
; P3/ UDB
; CALL MSSSVC ;(P3/)
; RETURN +1
MSSSVC: MOVX T4,UC.OLB ;GET MASK FOR ONLINE
TDNE T4,UDBCHR(P3) ;ONLINED VIA SERVER?
SETOM SVD ;YES
RET ;NO
ENDTV.
;MSSCZK - MAKE SCHEDULER RUN US ASAP WITHOUT HOSING OTHERS
;
MSSCZK: SETZM MSSTIM ;FORCE FAST RETRY
AOS PSKD1 ;TELL SCHED SOMETHING TO DO
RET
SWAPCD
SUBTTL End of PHYMVR
TNXEND
END