Google
 

Trailing-Edge - PDP-10 Archives - BB-R775E-BM - sources/edt/wfendins.bli
There are 10 other files named wfendins.bli in the archive. Click here to see a list.
 %TITLE 'WFENDINS - end of a series of inserts'
MODULE WFENDINS (				! End of a series of inserts
		IDENT = '1-005'			! File: WFENDINS.BLI Edit: SMB1005
		) =
BEGIN
!
!			  COPYRIGHT (c) 1981, 1985 BY
!	      DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
!		ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND  COPIED
! ONLY  IN  ACCORDANCE  WITH  THE  TERMS  OF  SUCH  LICENSE AND WITH THE
! INCLUSION OF THE ABOVE COPYRIGHT NOTICE.  THIS SOFTWARE OR  ANY  OTHER
! COPIES  THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
! OTHER PERSON.  NO TITLE TO AND OWNERSHIP OF  THE  SOFTWARE  IS  HEREBY
! TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE  WITHOUT  NOTICE
! AND  SHOULD  NOT  BE  CONSTRUED  AS  A COMMITMENT BY DIGITAL EQUIPMENT
! CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR  RELIABILITY  OF  ITS
! SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
!

!++
! FACILITY:	EDT -- The DEC Standard Editor
!
! ABSTRACT:
!
!	End of a series of inserts.
!
! ENVIRONMENT:	Runs at any access mode - AST reentrant
!
! AUTHOR: Bob Kushlis, CREATION DATE: October 16, 1978
!
! MODIFIED BY:
!
! 1-001	- Original.  DJS 23-Feb-1981.  This module was created by
!	extracting routine EDT$$END_INS  from module EDTWF.
! 1-002	- Regularize headers.  JBS 16-Mar-1981
! 1-003 - Remove division from line number calculations.  SMB 14-Jan-1982
! 1-004 - Add error check for line number too large.  SMB 04-Feb-1982
! 1-005 - Pass count by address instead of by value.  SMB 07-Feb-1982
!--

%SBTTL 'Declarations'
!
! TABLE OF CONTENTS:
!

REQUIRE 'EDTSRC:TRAROUNAM';

FORWARD ROUTINE
    EDT$$END_INS : NOVALUE;

!
! INCLUDE FILES:
!

REQUIRE 'EDTSRC:EDTREQ';

!
! MACROS:
!
!	NONE
!
! EQUATED SYMBOLS:
!
!	NONE
!
! OWN STORAGE:
!
!	NONE
!
! EXTERNAL REFERENCES:
!
!	In the routine
%SBTTL 'EDT$$END_INS  - end a series of inserts'

GLOBAL ROUTINE EDT$$END_INS 			! End a series of inserts
    : NOVALUE =

!++
! FUNCTIONAL DESCRIPTION:
!
!	This routine is called at the end of a series of insertions.  A line number
!	increment is computed and the new lines are resequenced.  At this time, the
!	variable WK_INSCNT  is the number of lines which were inserted,
!	WK_STARTNO  and WK_NXTLNO  are the line numbers of
!	the lines preceding and following the inserted lines.  The line number increment
!	is determined as follows:  If the difference between START and NXT is greater
! 	than the number of lines to be inserted, then find the closest power of ten
!	and increment in units of (1*that power) beginning with STARTNO. If there
!	is not enough room, use an increment of .00001 and resequence the lines
!
! FORMAL PARAMETERS:
!
!	NONE
!
! IMPLICIT INPUTS:
!
!	WK_INSCNT
!	WK_NXTLNO
!	WK_STARTNO
!	LNO_ZERO
!	LNNO_BIG
!	LNO0
!
! IMPLICIT OUTPUTS:
!
!	NONE
!
! ROUTINE VALUE:
!
!	NONE
!
! SIDE EFFECTS:
!
!	Calls EDT$$RSEQ
!
!--

    BEGIN

    EXTERNAL ROUTINE
	EDT$$CMP_LNO,
	EDT$$RD_PRVLN,
	EDT$$RD_CURLN : NOVALUE,
	EDT$$RSEQ : NOVALUE;

    EXTERNAL
	LNO_BIG : LN_BLOCK,		! Maximum line number
	WK_INSCNT : LN_BLOCK,		! The count of inserted lines
	WK_NXTLNO : LN_BLOCK,		! Line number following an insert
	WK_STARTNO : LN_BLOCK,		! Line number of line preceding an insert
	LNO_ZERO : LN_BLOCK,
	LNO0 : LNOVECTOR [14];

    LOCAL
	MAX,
	DIF : LN_BLOCK,
	INC : LN_BLOCK,
	DIVISOR : LN_BLOCK;

!+
! Don't do anything if count is zero.
!-

    IF (EDT$$CMP_LNO (LNO_ZERO, WK_INSCNT) EQL 0) THEN RETURN;

!+
! Position to the first inserted line.
!-
    EDT$$RD_CURLN ();
    MOVELINE (LNO_ZERO, INC);

    DO
	BEGIN
	EDT$$RD_PRVLN ();
	ADDLINE (LNO0, INC, INC);
	END
    UNTIL (EDT$$CMP_LNO (INC, WK_INSCNT) EQL 0);

!+
! Compute the difference in line numbers between the lines surrounding
! the inserted text.
!-
    SUBLINE (WK_STARTNO, WK_NXTLNO, DIF);
!+
! If this is zero, we must be at the end of the buffer; choose an increment of 1.00000
!-

    IF (EDT$$CMP_LNO (DIF, LNO_ZERO) EQL 0)
    THEN
	MOVELINE (LNO0 [5], INC)
    ELSE
!+
! Compute an increment for numbering the lines.
!-
	BEGIN
	ADDLINE (LNO0, WK_INSCNT, DIVISOR);	! # of lines + 1

	IF (EDT$$CMP_LNO (DIVISOR, DIF) GTR 0)	! If there are more lines to
	THEN 					! insert than room available
	    MOVELINE (LNO0, INC)		! use .00001 as increment
	ELSE
	    BEGIN
	    MOVELINE (LNO0 [5], INC);	! Assume INC=1.00000
	    					! unless another is found

	    INCR I FROM 0 TO 4 DO
		BEGIN
!+
! Find the closest power of ten to the quotient of DIF/DIVISOR which is less than 10**5
! by increasing the divisor by a power of ten and comparing to DIF
!-
		MULTLINE (LNO0 [1], DIVISOR, DIVISOR);

		IF (EDT$$CMP_LNO (DIVISOR, DIF) GTR 0)
		THEN
		    BEGIN
		    MOVELINE (LNO0 [.I], INC);
		    EXITLOOP;
		    END;

		END;

	    END;

	END;

!+
! Get the number of the first new line.  If the maximum line number is
! exceeded, make the start number equal to the largest possible line number
!-
    MAX = ADDLINE (INC, WK_STARTNO, WK_STARTNO);
    IF ((.MAX NEQ 0) OR (EDT$$CMP_LNO(WK_STARTNO, LNO_BIG) GTR 0))
    THEN
	MOVELINE (LNO_BIG, WK_STARTNO);
!+
! And resequence the range.
!-
    EDT$$RSEQ (WK_INSCNT, WK_STARTNO, INC)
    END;


END
ELUDOM