There are 26 other files named xpnpsi.mac in the archive. Click here to see a list.
TITLE XPNPSI - BLISSNET-10 PSI assist routines
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; OR COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
; COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1985.
; ALL RIGHTS RESERVED.
BLKMAX=20 ;Max routine addr storage
; This module contains the routines needed by BLISSNET-10 to use
; the PSI interface to TOPS-10. It is necessary because it is impossible
; to save AC's at interrupt level in a BLISS routine.
; Start using the DIL standard edit history format.
; Facility: Blissnet
; Edit (%O'2', '12-Apr-84', 'Sandy Clemens')
; %( Add the TOPS-10 BLISSnet sources for DIL V2. )%
; Edit (%O'6', '5-Oct-84', 'Sandy Clemens')
; %( Add new format of COPYRIGHT notice. FILES: ALL )%
; TOPS-10 PSI initialization
; Notes: COBOL-10 V12B and FORTRAN-10 V7.0 do not use PSI
; Hopefully, no users do either. We must have it, but it is
; very hard to share between non-cooperating routines. In
; 7.01 they added a new PSI UUO (PISAV.) to get the PSI vector
; address if it was already set up. This is useful, but not
; totally sufficient. Which offset can we use? We could look
; for a free one (four words of zeros), but that may be
; allocated to some other uninitialized routine. We could put
; ourselves into the interrupt chain on the first interrupt
; block (each interrupt comes to us, we see it if is for us
; (DECnet), if not, pass it to the previous owner of this
; interrupt block). But someone might overwrite that block,
; then we stop getting interrupts! So, until we can solve this
; dilema, we will initialize the PSI system, and use it all
; by ourselves!
; Module XPN$DPSI
; This module is called with the address of the routine the caller would
; like called on a DECnet interrupt. This linkage is for BLISS, but could
; easily be done by MACRO as well. This routine will initialize PSI and
; set up to received DECnet interrupts. On each interrup the list of routines
; requesting notification will be called in turn with the PSI status word on
; the stack. This routine will then do a WAKE UUO on this job in case we were
; hibernating, and dismiss the interrupt.
; If the caller specifies a zero address for its routine, we will not call it,
; but will issue the WAKE and dismiss the interrupt.
DMOVEM T1,T1T2 ;Save AC's
SKIPN START ;Indicate that we have begun
PUSHJ P,PSIINI ;Need to start up PSI
SKIPN T2,-1(P) ;Routine
JRST DPSI1 ;Only wants a WAKE
MOVE T1,LSTLEN ;Get current LIST len
CAIL T1,BLKMAX ;LIST full?
JRST TOOMNY ;That is bad
ADDI T1,1 ;Next free word
MOVEM T2,LIST-1(T1) ;Save the routine address
AOS LSTLEN ;Remember new length
DPSI1: DMOVE T1,T1T2 ;Restore AC's
POPJ P, ;Return to caller
; Process interrupts.
; This routine is called whenever an interrupt is seen on
INT: MOVEM 16,ACBLK+16 ;Save AC16
MOVEI 16,ACBLK ;BLT pointer
BLT 16,ACBLK+15 ;Save all but stack pointer
SKIPN LSTLEN ;Any routines to call?
JRST INT2 ;No, skip that part then
MOVN T1,LSTLEN ;Number or routines to call
HRLZS T1 ;Make AOBJN pointer
PUSH P,T1 ;Save this pointer over CALL
PUSH P,VECTOR+.PSVIS ;Save status word on stack
INT1: MOVEM T1,-1(P) ;Save current pointer
PUSHJ P,@LIST(T1) ;Call routine
MOVE T1,-1(P) ;Get back pointer
AOBJN T1,INT1 ;Loop
POP P,(P) ;Clear the stack
INT2: SETO T1, ;Set to wake us
WAKE T1, ;Wake us
JFCL ;Not normally seen
MOVE 16,[XWD ACBLK,0] ;Set up BLT pointer
BLT 16,16 ;Restore AC's
DEBRK. ;Dismiss the interrupt
PSIINI: SETOM START ;We have been here now
MOVE T1,[XWD 1,T2] ;Get first word (flags)
PISAV. T1, ;Of PSI database
JFCL ;Block to short
TLNE T2,(PS.SON) ;Was it already in use?
JRST PSIERR ;Yes, have to quit
MOVEI T1,VECTOR ;Address of vector
PIINI. T1, ;Initialize PSI
JRST PSIERR ;Not good
MOVE T2,[EXP .PCNSP] ;Reason code DECnet
SETZB T3,T4 ;Vector offset 0, prio=0, no I/O
MOVE T1,[EXP PS.FON!PS.FCP!PS.FAC!T2] ;Flags, address of args
JRST PSIERR ;Fatal
POPJ P, ;All initialized
PSIERR: OUTSTR [ASCIZ/
?XPNCIP Can not initialize the PSI interrupt system.
TOOMNY: OUTSTR [ASCIZ/
?XPNTMY Too many calls to XPN$DPSI.
ACBLK: BLOCK 17 ;Place to save AC's on INT
VECTOR: EXP INT ;Interrupt vector, new PC
START: EXP 0 ;Init flag
LSTLEN: EXP 0 ;LIST length
LIST: BLOCK BLKMAX ;List of routines to call on INT
T1T2: BLOCK 2 ;Save T1, T2
T3T4: BLOCK 2 ;Save T3, T4