Google
 

Trailing-Edge - PDP-10 Archives - CFS_TSU04_19910205_1of1 - update/t20src/daptra.b36
There are 4 other files named daptra.b36 in the archive. Click here to see a list.
MODULE TRACE (	!
		IDENT = '3'
                %BLISS36(,
                    ENTRY(
			  D$STRACE,    ! See if Tracing wanted
			  D$BTRACE,    ! Output link banner line
			  D$ZTRACE,    ! Close-link banner
			  D$CTRACE,    ! Close any trace log
                          D$TRACE      ! Trace a message
                         ))
		) =
BEGIN

!
!	COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1981, 1986.
!	ALL RIGHTS RESERVED.
!
!	THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY  BE  USED  AND
!	COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH
!	THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE.   THIS  SOFTWARE  OR
!	ANY  OTHER  COPIES  THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE
!	AVAILABLE TO ANY OTHER PERSON.  NO TITLE TO AND OWNERSHIP OF  THE
!	SOFTWARE IS HEREBY TRANSFERRED.
!
!	THE INFORMATION IN THIS SOFTWARE IS  SUBJECT  TO  CHANGE  WITHOUT
!	NOTICE  AND  SHOULD  NOT  BE CONSTRUED AS A COMMITMENT BY DIGITAL
!	EQUIPMENT CORPORATION.
!
!	DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR  RELIABILITY  OF
!	ITS SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!

!++
! FACILITY:	RMS-20/RMSFAL
!
! ABSTRACT:	Contains main routines to trace incoming and outgoing
!		DAP messages.
!
!		Tracing by either RMS-20 (sending) or the RMSFAL (receiving)
!		is controlled by the global variable D$GTRACE.  If
!		D$GTRACE < 0, each DAP message sent or received is traced.
!		There are currently 4 flavors of tracing:
!
!		D$GTRACE = -1  => Full trace: Headers are interpreted,
!				  and each byte of the DAP message traced.
!		D$GTRACE = -2  => Only header information and summary fields
!				  are traced.
!		D$GTRACE = -3  => Only headers.
!		D$GTRACE = -4  => Only link connect/disconnect.
!
!		NOTE: DAP tracing is an UNSUPPORTED utility.  Its behavior
!		      and effects may change at any time, or perhaps not
!		      be provided in the future.

!		D$GTRACE may be turned on or off by the following means:
!
!		1) Patch D$GTRACE (in either RMS-20 or RMSFAL) in DDT.
!		
!		2) Issue the [NO]TRACE command in DIU-20 or RMSDEB. (Full
!		   tracing only.)  Note that NOTRACE does not override
!		   DAP$TRACE.
!		
!		3) Issue the RMS $DEBUG JSYS (1013) with an argument of 400000
!		   in AC1. (Full tracing only.)
!		
!		4) For RMS-20 tracing, define the job-wide logical name
!		   DAP$TRACE: as -1, -2, -3 or -4.  If DAP$TRACE is defined
!		   but its value cannot be interpreted, the default is full
!		   tracing.  If DAP$TRACE is defined, the job-wide logical
!		   name DAP$OUTPUT is examined.  If it has not been defined,
!		   or if it has been defined but cannot be interpreted as
!		   a filespec, trace output goes to the terminal; otherwise
!		   to the file specified by DAP$OUTPUT.  Existing output
!		   files are appended to.
!
!		5) For FAL tracing, define the job-wide logical name
!		   FAL$LOG: as -1, -2, -3 or -4.  If FAL$LOG is defined
!		   but its value cannot be interpreted, the default is full
!		   tracing.  If FAL$LOG is defined, the job-wide logical
!		   name FAL$OUTPUT is examined.  If it has not been defined,
!		   or if it has been defined but cannot be interpreted as
!		   a filespec, trace output goes to PS:[logged-in-directory]
!		   FAL.LOG; otherwise to the file specified by FAL$OUTPUT.
!		   Existing output files are appended to.
!		
!		   CAUTION: FAL$OUTPUT should not be defined as TTY:, or
!		   the FAL may hang.  FAL$OUTPUT should not point to
!		   DAP$OUTPUT.
!
!
! ENVIRONMENT:	TOPS-20, Transportable BLISS DecNet Interface
!
! AUTHOR:	Andrew Nourse/Tom Speer
!
! 05 [663]- Complete rewrite.
! 04    - Move all pure data to hiseg and remove FTS command stuff
! 03    - Hack to let us live without RMS
! 02    - Put in ENTRY points
! 01	- The beginning
!--
!
! TABLE OF CONTENTS:
!

FORWARD ROUTINE
	D$STRACE: NOVALUE,		! Check if tracing wanted
	D$BTRACE: NOVALUE,		! Output startup banner
	D$ZTRACE: NOVALUE,		! Output close-down banner
	D$CTRACE: NOVALUE,		! Close any trace log
	D$TRACE: NOVALUE,		! Trace a DAP message
	OMsg: NOVALUE,			! Output a DAP message
	Olen;				! Output message length
!
! INCLUDE FILES:
!

%IF %BLISS(BLISS36)                                                  !a572
    %THEN %IF %SWITCHES(TOPS10)
          %THEN
          LIBRARY 'BLI:UUOSYM';
          UNDECLARE
              ER$FUL,
              %QUOTE DATE;
          %FI
      %FI

REQUIRE 'RMSREQ';
REQUIRE 'RMSOSD';
LIBRARY 'BLISSNET';

!
! MACROS:
!

KEYWORDMACRO Put_Trace (Rab, String)=
    BEGIN
    BIND Stringd=String: $str_Descriptor();

    %IF %SWITCHES(TOPS20)                                             !m572
    %THEN
        Sout(.D$gTrJfn,
             .stringd[Str$a_Pointer],
             .stringd[Str$h_Length],
             0)
    %ELSE
        OUTSTR_UUO((CH$PLUS(.stringd[Str$a_pointer], 1))<rh>);
    %FI

    %(
    BIND Brab=Rab: $rab_Decl;
    %IF NOT %NULL(String)
         %THEN
         IF Brab EQL -1
         THEN Sout($priou,
                   .stringd[Str$a_Pointer],
                   .stringd[Str$h_Length],
                   0)
         ELSE
             BEGIN
             Brab[Rab$h_Rsz]=.stringd[Str$h_Length];
             Brab[Rab$a_Rbf]=CH$PLUS(.stringd[Str$a_Pointer],1)
                              AND %O'777777';
             $Put (%QUOTE Rab=Brab )
             END
         %FI
      )%
    END %;

MACRO $CR_LOGIT(TEXT) =
           SOUT(.D$GTRJFN,CH$PTR(UPLIT(%ASCIZ %STRING(%CHAR(13,10),TEXT))),0);
           %;
MACRO $LOGIT_CR(TEXT) =
	   SOUT(.D$GTRJFN,CH$PTR(UPLIT(%ASCIZ %STRING(TEXT,%CHAR(13,10)))),0);
	   %;
MACRO $LOGIT(TEXT) =
	   SOUT(.D$GTRJFN,CH$PTR(UPLIT(%ASCIZ TEXT)),0);
	   %;
MACRO LOG$IT(POINTER,LENGTH) = 
	   SOUT(.D$GTRJFN,POINTER,-LENGTH,0);
	   %;
MACRO Crlf=%STRING(%CHAR(13),%CHAR(10)) %;

!
! OWN STORAGE:
!
PSECT OWN=$HIGH$;
PSECT GLOBAL=$HIGH$;

GLOBAL D$GTrMax: INITIAL(4000);         ! Max number of bytes to type out
GLOBAL D$GTWidth: INITIAL(80);          ! Width of typeout
GLOBAL D$In_Count;			! # DAP messages received
GLOBAL D$Out_Count;			! #  "     "     sent

GLOBAL Tbuff: VECTOR[CH$ALLOCATION(135)];
%IF %SWITCHES(TOPS20)
%THEN
GLOBAL D$GTrJfn;
BIND  TJfn = D$GTrJfn;
%FI

OWN T_Crlf: INITIAL (%ASCII Crlf),
    D_Crlf: $str_Descriptor(String=(2,CH$PTR(T_Crlf)));

OWN IByte;				! #  Bytes received
OWN OByte;				! #  Bytes sent
OWN Inrec;				! # DAP DATA msgs received
OWN Outrec;				! #  "   "    "   sent

!
! EXTERNAL REFERENCES:
!

EXTERNAL ROUTINE
	T_Datatype,		! In DAPTRT
	T_Fop,
	T_Fac,
	T_Shr,
	T_Dsp,
	T_Ctl,
	T_Dtm,
	T_Pro,
	OTime,
	GTrJfn,
	Dap$Get_Header,		! (elsewhere)
	Dap$Get_Bitvector,
	Dap$Get_Longword,
	Dap$Get_Variable_String,
	Dap$Get_Variable_Counted,
	Dap$Unget_Header,
	Dap$Unget_Byte,
	Dap$Error_Dap_Rms,
	Dap$Rfa_Dap_Rms,
	Dap$Get_2Byte;

EXTERNAL
	D$GTRACE;

! These are the PLIT tables to interpret DAP message fields.

EXTERNAL
	HdrTab : VECTOR,
	Ostype  : VECTOR,
	Filesys : VECTOR,
	Orgtype : VECTOR,
	Rfmtype : VECTOR,
	RATType : VECTOR,
	Acctype : VECTOR,
	CtlType : VECTOR,
	Contype : VECTOR,
	Accomptype : VECTOR ;
GLOBAL ROUTINE D$STRACE (P_Nodeid : REF $Str_Descriptor(),
			   P_Nlb_Jfn) :NOVALUE = 

!++
! FUNCTIONAL DESCRIPTION:
!
!	Called from RMS-20 remote file open processing to see if DAP$TRACE
!	and DAP$OUTPUT have been defined.  If both are already defined,
!	output end-of-link stats from any simultaneously open link and return.
!
! FORMAL PARAMETERS:
!
!	None
!
! IMPLICIT INPUTS:
!
!       D$GTRACE
!
!--

BEGIN
	BIND Nodeid = .P_Nodeid : $Str_Descriptor();
	BIND Net_Jfn = .P_Nlb_Jfn;
	LOCAL Nodename : BLOCK[CH$ALLOCATION(11)];


!	If we are already tracing, just return now.

	IF .D$GTRACE NEQ 0 AND .D$GTRJFN NEQ 0 THEN
	BEGIN
		IF .D$In_Count NEQ 0 OR .D$Out_Count NEQ 0 THEN
		BEGIN
		D$CTrace();
		D$GTrJfn = GTrJfn();
		END;

		SOUT(CH$PTR(Nodename),.nodeid[Str$a_Pointer],
			-.Nodeid[Str$h_Length]);
		D$BTrace(Nodename,Net_Jfn);

	RETURN;
	END;

	D$GTrJfn = GTrjfn();

	IF .D$Gtrace LSS 0 THEN	
	BEGIN
		SOUT(CH$PTR(Nodename),.nodeid[Str$a_Pointer],
			-.Nodeid[Str$h_Length]);

		D$BTrace(Nodename,Net_jfn);
		IByte = Obyte = Inrec = Outrec = 0;

	END;



END;	! D$STRACE
GLOBAL ROUTINE D$BTRACE (Nodename,Net_Jfn): NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
!
!	Output a link-startup banner line.
!
! FORMAL PARAMETERS:
!
!	NODENAME:	Address of remote partner's nodename string
!	NET_JFN:	NLB's network JFN (Link ID).
!
! IMPLICIT INPUTS:
!
!       D$GTRJFN
!
!--

BEGIN
	BIND Jfn = D$GTrJfn;
	LOCAL ptr;
	ptr = CH$PTR(Tbuff);

	IF .Jfn NEQ $PRIOU THEN Openf(.Jfn,Of_APP+7^30);
	$Cr_Logit('********************************************');
	$Cr_Logit('Link ID:');
	Nout(.Jfn,.Net_Jfn<rh>,8);
	$logit(' established on ');
	OTime(.Jfn,0,0,0);
	IF Node ($NDGln,ptr) THEN
	BEGIN
		$Logit('Local: ');
		Log$it(CH$PTR(Tbuff),0);
	END;
	If .Nodename NEQ 0 THEN
	BEGIN
		$Logit(', Remote: ');
		Log$it(CH$PTR(.Nodename),0);
	END;
	$Cr_Logit('Trace Level: ');
	Nout(.Tjfn,.D$Gtrace,10);
	SOUT(.TJfn,CH$PTR(T_Crlf),2);

	IF .Jfn NEQ $PRIOU THEN Closf(.Jfn+Co_Nrj);

END;
GLOBAL ROUTINE D$ZTRACE (Net_Jfn) : NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
!
!	Output an end-of-link banner.
!
! FORMAL PARAMETERS:
!
!	NET_JFN:	NLB's network JFN (Link ID)
!
! IMPLICIT INPUTS:
!
!       D$GTRJFN
!
!--

BEGIN

	IF .Tjfn EQL 0 THEN RETURN;
	IF .Tjfn NEQ $PRIOU THEN Openf(.Tjfn,OF_APP+7^30);
	$cr_Logit('Link ID:');
	Nout(.Tjfn,.Net_Jfn<rh>,8);
	$logit(' closed on ');
	OTime(.TJfn,0,0,0);
	Closf(.Tjfn+Co_Nrj);
END;
GLOBAL ROUTINE D$CTRACE  :NOVALUE = 

!++
! FUNCTIONAL DESCRIPTION:
!
!	Close the logfile whose JFN is in D$GTRJFN and write some
!	end-of-link statistics.  Called by both RMS and the FAL.
!
!
! FORMAL PARAMETERS:
!
!
! IMPLICIT INPUTS:
!
!       D$GTRJFN
!
!--

BEGIN


	IF .Tjfn EQL 0 THEN TJfn = GTrJfn();
	IF (.D$In_Count+.D$Out_Count) EQL 0 THEN RETURN;

	IF .Tjfn NEQ $PRIOU THEN Openf(.TJfn,Of_APP+7^30);
	$cr_Logit('=======================================');
	$cr_Logit('	# DAP msgs  Exchanged: ');
	Nout(.TJfn,.D$In_Count+.D$Out_Count,10);
	$cr_Logit('	                 Recd: ');
	Nout(.TJfn,.D$In_Count,10);
	$cr_Logit('		         Sent: ');
	Nout(.TJfn,.D$Out_Count,10);
	$cr_Logit('	# DAP bytes Exchanged: ');
	Nout(.TJfn,.IByte+.OByte,10);
	$cr_Logit('	                 Recd: ');
	Nout(.TJfn,.IByte,10);
	$cr_Logit('		         Sent: ');
	Nout(.TJfn,.Obyte,10);

	IF (.Inrec + .Outrec) NEQ 0 THEN
	BEGIN
	$cr_Logit('	# Data msgs Exchanged: ');
	Nout(.TJfn,.Inrec+.Outrec,10);
	IF .Inrec NEQ 0 THEN
	BEGIN
	$cr_Logit('	                 Recd: ');
	Nout(.TJfn,.Inrec,10);
	END;
	IF .Outrec NEQ 0 THEN
	BEGIN
	$cr_Logit('		         Sent: ');
	Nout(.TJfn,.Outrec,10);
	END;
	END;

	$cr_Logit('======================================');
	$Logit_cr('=');
	IF .Tjfn NEQ $PRIOU THEN Closf(.Tjfn);
	TJfn = 0;
	D$In_Count = D$Out_Count = IByte = Obyte = Inrec = Outrec = 0;

END;	! D$CTRACE
GLOBAL ROUTINE D$TRACE (DD,MESSAGE_TYPE) :NOVALUE =	!

!++
! FUNCTIONAL DESCRIPTION:
!
!       Trace DAP message
!
! FORMAL PARAMETERS:
!
!	DD: addr of DAP descriptor
!       MESSAGE_TYPE: 
!                   DAP$K_TRACE_INPUT (1): Message is being input
!                   DAP$K_TRACE_OUTPUT (2): Message is being output
! [Unused]          DAP$K_TRACE_INTERRUPT_INPUT (5): Interrupt msg input
! [Unused]          DAP$K_TRACE_INTERRUPT_OUTPUT (6): Interrupt msg output
!
!
! IMPLICIT INPUTS:
!
!       D$GTRACE,D$GTRMAX
!
!--

    BEGIN
    MAP Dd: REF $dap_Descriptor;

    LABEL Do_Message;
    LOCAL
	Tdd: $dap_Descriptor,   !Temp descriptor
        Header,
	Function,
	Net_Jfn;

    BIND Twidth=D$gtwidth;

! And the temporary Dap Descriptor

    IF .D$GTRACE+4 EQL 0 THEN RETURN;

    $xpn_Desc_Init (Descriptor=Tdd , Class=Bounded );

! Copy in relevant portions of the DAP descriptor


    Tdd[Dap$a_Data]=.dd[Dap$a_Data];
    Tdd[Dap$h_Bytes_Remaining]=.dd[Dap$h_Bytes_Remaining];
    Tdd[Dap$h_Bytes_Used]=.dd[Dap$h_Bytes_Used];
    Tdd[Dap$h_Message_Length]=.dd[Dap$h_Message_Length];
    Tdd[Dap$h_Length]=.dd[Dap$h_Length];

! Brutally and illegally swipe the Nlb's Jfn for an ID.

    Net_Jfn<rh> = .((.dd[Dap$a_Nlb])+30);
    
    IF .Tjfn EQL 0 THEN Tjfn = GTrJfn();

    Openf(.Tjfn,Of_App+7^30);

!+
! Read the whole message, unblocking as we go.  The loop is post-tested
! to catch and trace spurious messages with a byte-length of zero.
!-

DO					!DO WHILE
Do_Message: BEGIN
    LOCAL filespec: VECTOR[CH$ALLOCATION(255)];	!Store filespec

    LOCAL Header_Len,
	  Message_Length,
	  Save_pos;


!   Output a directional header


    CASE .message_Type FROM 1 TO 7 OF
         SET
         [Dap$k_Trace_Input]:
		BEGIN
		OTime(.TJfn,Ot_Nda,Dap$k_Trace_Input,.Net_Jfn);
		IF .dd[Dap$v_Interrupt]
		THEN 
		   BEGIN
			$Logit('Int> ');
		   END
		ELSE 
		   BEGIN
			$Logit('===> ');
		   END;
		D$In_Count = .D$In_Count+1;	! Count msgs in
		END;

         [Dap$k_Trace_Output]:
		BEGIN
		OTime(.Tjfn,Ot_Nda,Dap$k_Trace_Output,.Net_Jfn);
		IF .dd[Dap$v_Interrupt]
		THEN 
		   BEGIN
			$Logit('<Int ');
		   END
		ELSE 
		   BEGIN
			$Logit('<=== ');
		   END;

		D$Out_Count = .D$Out_Count + 1;	! Count msgs out
		END;

         [Dap$k_Trace_Input_Interrupt]:
		BEGIN
		$Cr_Logit('Int> ');
		END;
         [Dap$k_Trace_Output_Interrupt]:
		BEGIN
		$Cr_Logit('<Int ');
		END;

         [INRANGE,OUTRANGE]:
            $xpo_Put_Msg(String='TRACE argument out of range',Severity=Fatal);
         TES;


!   Save full message length before it is decremented by $Get_Header

    Message_Length = .Tdd[Dap$h_Bytes_Remaining];

!   If the message has any DAP data in it at all, we can $Get_Header the
!   Operator field.  Otherwise, $Get_Header goes off to get a new message!
!
    IF .Tdd[Dap$h_Bytes_Remaining] GTR 0
    THEN
	BEGIN
        Header = Dap$Get_Header(Tdd);                 ! Peek at message type
	END
    ELSE
	BEGIN
	Header = Get_Byte(Tdd);
	END;

!   Record how many bytes were actually in the header, so blocked messages
!   can be correctly sized according to the LENGTH field (length of
!   Operator).

    Header_Len = .Message_Length - .Tdd[Dap$h_Bytes_Remaining];

!   Calculate actual length of this DAP message (as opposed to total
!   blocked length).

!   If the LENGTH flag is on, this message may be blocked, so we
!   calculate the total byte-length to output as the remaining
!   Dap$h_length of this message plus the number of bytes we read
!   in the header.
!   If the LENGTH flag  is off, the message length is the Bytes_Remaining
!   plus the header length.

    IF .Tdd[Dap$v_Mflags_Length]
    THEN  Message_Length = .Tdd[Dap$h_Length] + .Header_Len
    ELSE  Message_Length = .Tdd[Dap$h_Bytes_Remaining] + .Header_Len;

!   Keep running total of DAP bytes in and out.

    IF .message_type EQL Dap$k_Trace_Input
    THEN IByte =  .Ibyte + .Message_Length;
    IF .message_type EQL Dap$k_Trace_Output
    THEN OByte = .OByte + .Message_Length;

!   Protect against bogus messages

    IF .Header LSS 0 OR .Header GTR .Hdrtab[-1] THEN Header = 0;

!   Output the corresponding message type, Englished.

    Log$it(CH$PTR(.Hdrtab[.Header]),3);
    $Logit(' ');

!   If message was really bogus, complete a truncated trace and leave.

    IF .Tdd[Dap$h_Bytes_Remaining] LEQ 0 AND .Header EQL 0
    THEN
	BEGIN
	$Logit('msg');
	IF NOT Olen(Tdd,0) THEN  SOUT(.TJfn,CH$PTR(T_Crlf),2);
	Closf(.TJfn+Co_Nrj);
	RETURN
	END;


!+
!   Do some special things by message type.
!-

    CASE .Header FROM 0 TO Dap$k_Acl OF
    SET

    [Dap$k_Config,
     Dap$k_Attributes,
     Dap$k_Name,
     Dap$k_Status,
     Dap$k_Date_Time,
     Dap$k_Protection]:

	BEGIN

	  Save_pos = .Tdd[Dap$h_Bytes_Remaining];	! Save our position
	  $Logit('msg');
	  IF Olen(Tdd,.Message_Length) THEN LEAVE Do_Message; ! Write msg Len:

	  $Cr_Logit('      ');

	  SELECTONE .Header OF
	  SET

          [Dap$k_Config]:		! Englishify upto (not including)
	  BEGIN				!   the SYSCAP field

	  LOCAL
		Bufsiz,
		Ost,
		Flsys,
		Dapver,
		Dapeco;


!	Get 6 bytes of interesting stuff

	  Bufsiz = Dap$Get_2Byte(Tdd);
	  Ost = Get_Byte(Tdd);
	  Flsys = Get_Byte(Tdd);
	  Dapver = Get_Byte(Tdd);
	  Dapeco = Get_Byte(Tdd);

!	Output each item, with a preceding ID tag

!	BUFSIZ:nnnnnn

	  $Logit('Bufsiz:');
	  Nout(.Tjfn,.Bufsiz,8);

!	OST:
	  $Logit(' Ost:');

!	Protect against bogus values

	  IF .Ost GTR .Ostype[-1]
	  THEN Ost = 0;

!	Index into Ostype table for text

	  Log$it(CH$PTR(.Ostype[.Ost]),8);

!	FILESYS:

	  $Logit('Filesys:');

!	Protect against bogus values

	  IF .Flsys GTR .Filesys[-1]
	  THEN Flsys = 0;

!	Index into Filesys table for text

	  Log$it(CH$PTR(.Filesys[.Flsys]),8);

!	Dap VER:

	  $Logit('Ver:');
	  Nout(.Tjfn,.Dapver,8);

!	Dap ECO:

	  $Logit(' Eco:');
	  Nout(.Tjfn,.Dapeco,8);

	  END;	!DAP$K_CONFIG

	  [Dap$k_Attributes]:
		BEGIN
		LOCAL attmenu: BITVECTOR[42] INITIAL(0),
                      org: INITIAL(0),
                      rfm: INITIAL(0),
                      rat: BITVECTOR[21] INITIAL(0),
                      bls: INITIAL(0),
                      mrs: INITIAL(0),
		      tmp;

		Dap$Get_Bitvector (Tdd, attmenu, 6);	!Attributes menu bits

		IF .attmenu[Dap$v_Attmenu_Dat]                  ! Datatype?
                THEN 
		BEGIN
			$Logit('Dtp:');
			T_Datatype(Tdd);

		END;

	  IF .attmenu[Dap$v_Attmenu_Org]    ! File Organization
                THEN
                    BEGIN
                    org=$Dap_Translate_Value(Get_Byte(Tdd),
                                                        Dap$k_Org_,Fab$k_,
                                                        Seq,Rel,Idx,Hsh);

		    $logit('Org:');
		    IF .org GTR .Orgtype[-1] 
		    THEN org = 0;

		    Log$it(CH$PTR(.orgtype[.org]),3);

		    END;

		IF .attmenu[Dap$v_Attmenu_Rfm]    ! Record Format
                THEN
                    BEGIN

                    rfm=Get_Byte(Tdd);
		    IF .rfm GTR .rfmtype[-1] THEN rfm = 0;
		    $logit(' Rfm:');
		    Log$it(CH$PTR(.rfmtype[.rfm]),3);

		    END;

		IF .attmenu[Dap$v_Attmenu_Rat]    ! Record Attributes
                THEN
                    BEGIN
		    LOCAL v: INITIAL(0);
		    LITERAL Prn = 2;

                    rat=Get_Byte(Tdd);
                    IF .Rat[Dap$v_Rat_Ftn] THEN v=0;
                    IF .Rat[Dap$v_Rat_Cr]  THEN v=1;
                    IF .Rat[Prn]	   THEN v=2;
                    IF .Rat[Dap$v_Rat_Blk] THEN v=3;
                    IF .Rat[Dap$v_Rat_Efc] THEN v=4;
                    IF .Rat[Dap$v_Rat_Cbl] THEN v=5;
                    IF .Rat[Dap$v_Rat_Lsa] THEN v=6;
                    IF .Rat[Dap$v_Rat_Macy11] THEN v=7;

		    $Logit(' Rat:');
		    Log$it(CH$PTR(.RATtype[.v]),4);

		    END;

                IF .attmenu[Dap$v_Attmenu_Bls]
                THEN 
		    BEGIN
		    bls=Dap$Get_2Byte(Tdd);

		    $logit(' Bls:');
		    Nout(.Tjfn,.Bls,8);
		    END;
		
		IF .attmenu[Dap$v_Attmenu_Mrs]
                THEN 
		    BEGIN
		    $Logit(' Mrs:');
		    Mrs = Dap$Get_2Byte(Tdd);
		    Nout(.Tjfn,.Mrs,8);
		    END;

		IF .attmenu[Dap$v_Attmenu_Alq]
		THEN 
		  BEGIN
			$Logit(' Alq:');
			Nout(.Tjfn,Dap$get_Longword(Tdd),8);
		  END;


		IF .attmenu[Dap$v_Attmenu_Bks]
		THEN 
		  BEGIN
			$Logit(' Bks:');
			Nout(.Tjfn,Get_Byte(Tdd),8);
		  END;


		IF .attmenu[Dap$v_Attmenu_Fsz]
		THEN
		  BEGIN
			$Logit(' Fsz:');
			Nout(.Tjfn,Get_Byte(Tdd),8);
		  END;

		IF .attmenu[Dap$v_Attmenu_Mrn]
		THEN 
		  BEGIN
			$Logit(' Mrn:');
			Nout(.Tjfn,Dap$Get_Longword(Tdd),8);
		  END;


		IF .attmenu[Dap$v_Attmenu_Run] THEN
		BEGIN
		  LOCAL runsys: VECTOR[CH$ALLOCATION(40)];
		  Dap$Get_Variable_String(Tdd,CH$PTR(runsys),40);
		END;

		IF .attmenu[Dap$v_Attmenu_Deq]
		THEN tmp = Dap$Get_2Byte(Tdd);

		IF .attmenu[Dap$v_Attmenu_Fop] THEN T_Fop(Tdd);

		IF .attmenu[Dap$v_Attmenu_Bsz]
		THEN
		  BEGIN
			$Logit(' Bsz:');
			Nout(.Tjfn,Get_Byte(Tdd),8);
		  END;

		IF .attmenu[Dap$v_Attmenu_Dev]
		THEN
		  BEGIN
		  LOCAL dev: BITVECTOR[42] INITIAL(0);

			$Cr_Logit('      Dev:');
			Dap$Get_Bitvector(Tdd, dev, 6);
			Nout(.Tjfn,.dev,8);
		  END;

		IF .attmenu[Dap$v_Attmenu_Sdc]
                THEN
                    BEGIN
		    LOCAL sdc: BITVECTOR[42] INITIAL(0);

		    Dap$Get_Bitvector (Tdd, sdc, 6);	
		    $Logit(' Sdc:');
		    Nout(.Tjfn,.sdc,8);
		    END;

		IF .attmenu[Dap$v_Attmenu_Lrl]
                THEN 
		    BEGIN
		    $Logit(' Lrl:');
		    Nout(.Tjfn,Dap$Get_2byte(Tdd),8);
		    END;

		IF .attmenu[Dap$v_Attmenu_Hbk]
                THEN
		    BEGIN
		    $Logit(' Hbk:');
		    Nout(.Tjfn,Dap$Get_Longword(Tdd),8);
		    END;

		IF .attmenu[Dap$v_Attmenu_Ebk]
                THEN 
		    BEGIN
		    $Logit(' Ebk:');
	  	    Nout(.Tjfn,Dap$Get_Longword(Tdd),8);
		    END;

		IF .attmenu[Dap$v_Attmenu_Ffb]
                THEN
		    BEGIN
		    $Logit(' Ffb:');
		    Nout(.Tjfn,Dap$get_2byte(Tdd),8);
		    END;
			
		END;	!DAP$K_ATTRIBUTES

	  [Dap$k_Name]:
	      BEGIN
		LOCAL
		      Nametype: BITVECTOR[21],
		      Save2;

		Dap$Get_Bitvector(Tdd, nametype, 3);

		IF .Nametype[Dap$k_Nametype_Fsp]
		      THEN $Logit('File: ');

		IF .Nametype[Dap$k_Nametype_Nam]
		      THEN $logit('Name: ');

		IF .Nametype[Dap$k_Nametype_Dir]
		      THEN $logit('Directory: ');

		IF .Nametype[Dap$k_Nametype_Str]
		      THEN $logit('Structure: ');

		IF .Nametype[Dap$k_Nametype_Def]
		      THEN $logit('Default file: ');

		IF .Nametype[Dap$k_Nametype_Rel]
		      THEN $logit('Related file: ');


		Save2 = Dap$Get_Variable_String(Tdd,CH$PTR(filespec),255);

		Log$it(CH$PTR(Filespec),.Save2);

	   END;  !DAP$K_NAME

          [Dap$k_Status]:
		BEGIN
		LOCAL	STV,
			STS,
			Rfa: BYTE8VECTOR[9];


		STV = Dap$Get_2Byte(Tdd);	! Get Mac/Mic
		STS = Dap$Error_Dap_Rms(.STV);	! Convert to STS

		$logit('Mac/Mic:');

		Nout(.Tjfn,.STV,8);

		$logit(' [Sts:');
	  	Nout(.Tjfn,.STS,8);
		$Logit(']');

		IF .Tdd[Dap$h_Length] GTR 0
		THEN
		  BEGIN
		    Dap$Get_Variable_Counted(Tdd,CH$PTR(rfa,0,8),8);
		    IF (.rfa[0]) GTR 0
		    THEN
			BEGIN
			LOCAL v;
			v=Dap$Rfa_Dap_Rms(rfa);
			v<35,1>=0;

			$logit(' Rfa:');
			Nout(.Tjfn,.v<lh>,8);
			$logit(',,');
			Nout(.Tjfn,.v<rh>,8);
			END;
		  END;

          END;	!DAP$K_STATUS


          [Dap$k_Date_Time]:

		BEGIN
		T_Dtm(Tdd);
		END;  !DAP$K_DATE_TIME


          [Dap$k_Protection]:

		BEGIN
		T_Pro(Tdd);
		END;  !DAP$K_PROTECTION

	TES;

	Save_Pos = .Save_Pos - .Tdd[Dap$h_Bytes_Remaining];
	INCR I From 0 to .Save_Pos-1
	DO Dap$Unget_Byte(Tdd);

	OMsg(Tdd,.Message_Length,Tbuff);	! Output the bytes

	END;

    [Dap$k_Access,
     Dap$k_Control,
     Dap$k_Continue,
     Dap$k_Access_Complete]:

	BEGIN

	Save_Pos = .Tdd[Dap$h_Bytes_Remaining];
	Function = Get_Byte(Tdd);

	SELECTONE .Header OF
	SET

    	[Dap$k_Access]:
	BEGIN
	   LOCAL
                Accopt: BITVECTOR[28],
		Save2;
	
	   IF .Function GTR .Acctype[-1]		! Protect vs bogus vals
	   THEN Function = 0;

	   Log$it(CH$PTR(.Acctype[.Function]),3);
	   IF Olen(Tdd,.Message_Length) THEN LEAVE Do_Message;


	   Dap$Get_Bitvector(Tdd,Accopt,5);		!Access options

           Save2 = Dap$Get_Variable_String(Tdd,CH$PTR(filespec),255);

	   $Cr_logit('      File: ');
	   Log$it(CH$PTR(Filespec),.Save2);

	   T_Fac(Tdd);
	   T_Shr(Tdd);
	   T_Dsp(Tdd);

	   END;	!DAP$K_ACCESS

    	[Dap$k_Control]:
	BEGIN

	   IF .Function GTR  .Ctltype[-1]
	   THEN Function = 0;

	   Log$it(CH$PTR(.Ctltype[.Function]),3);
	   IF Olen(Tdd,.Message_Length) THEN LEAVE Do_Message;

	   T_Ctl(Tdd);
	   
	   END;	!DAP$K_CONTROL

	[Dap$k_Continue]:
	BEGIN

	   IF .Function GTR .Contype[-1]
	   THEN Function = 0;

	   Log$it(CH$PTR(.Contype[.Function]),3);
	   IF Olen(Tdd,.Message_Length) THEN LEAVE Do_Message;

	END;	!DAP$K_CONTINUE

    	[Dap$k_Access_Complete]:
        BEGIN

	 IF .Function GTR .Accomptype[-1]
	 THEN Function = 0;

	 Log$it(CH$PTR(.Accomptype[.Function]),3);
	 IF Olen(Tdd,.Message_Length) THEN LEAVE Do_Message;

	 IF .Tdd[Dap$h_Length] GTR 0
	 THEN
	 BEGIN
		$Cr_Logit('     ');
		T_Fop(Tdd);
	 END;
	END;	!DAP$K_ACCESS_COMPLETE

	TES;
	  
       Save_Pos = .Save_Pos - .Tdd[Dap$h_Bytes_Remaining];
       INCR I From 0 to .Save_Pos-1
       DO Dap$Unget_Byte(Tdd);

       OMsg(Tdd,.Message_Length,Tbuff);	! Output the bytes

    END;

    [INRANGE,
     OUTRANGE]:
	BEGIN
	  $Logit('msg');
	  IF .Header EQL Dap$k_Data THEN
	  BEGIN
		IF .message_type EQL Dap$k_Trace_Input
		THEN InRec = .InRec +1;
		IF .message_type EQL Dap$k_Trace_Output
		THEN OutRec = .OutRec + 1;
	  END;
	  IF Olen(Tdd,.Message_Length) THEN LEAVE Do_Message;
          OMsg(Tdd,.Message_Length,Tbuff);
	END;

    TES;

 END !DO WHILE 


WHILE .Tdd[Dap$h_Bytes_Remaining] GTR 0;
Closf(.Tjfn+Co_Nrj);

    END;			!End of D$TRACE
ROUTINE OMsg	(P_Dd: REF $Dap_Descriptor,
			Msg_Len,
			O_Buff
			) : NOVALUE =

!++
! FUNCTIONAL DESCRIPTION:
!
!       Output-trace a DAP message byte-by-byte.
!
! FORMAL PARAMETERS:
!
!	P_DD: addr of DAP descriptor
!	Msg_Len: Length in bytes of the discrete DAP message to output
!	O_Buff:  Output trace buffer
!
! IMPLICIT INPUTS:
!
!       D$GTWIDTH,D$GTRMAX
!
!--

BEGIN

    LOCAL
    Odesc: $str_Descriptor(Class=Bounded);  !Output descriptor

    BIND Tdd = .P_dd: $Dap_Descriptor;
    BIND Tbuff = .O_Buff: VECTOR[CH$ALLOCATION (135)];
    BIND Twidth=D$gtwidth;
    BIND Trmax=D$gtrmax;

    LOCAL Noutbuf: VECTOR[CH$ALLOCATION(10)];
    LOCAL Truncated;


    ! Regurgitate the header we have already read

    Dap$Unget_Header(Tdd);

    ! Is there a limit to our patience?

    IF .tdd[Dap$h_Bytes_Remaining] GTR .trmax  ! too long a message?
    THEN
        BEGIN
        Truncated=.Msg_Len-.trmax;  ! # of bytes truncated
        Msg_Len=.trmax;
        END
    ELSE
        Truncated=0;
 
!   If the DAP debug trace flag is -2, forget about tracing DAP bytes.

    IF (.D$GTRACE + 2) EQL 0
    THEN
	BEGIN
	  DECR I FROM .Msg_Len-1 TO 0
	  DO Get_Byte(Tdd);
	  SOUT(.TJfn,CH$PTR(T_Crlf),2);	  
	  RETURN
	END;


    $str_Desc_Init(Descriptor=Odesc,Class=Bounded,
                   String=(.twidth+3,Ch$ptr(Tbuff)));
    $str_Copy(String=%STRING(Crlf,'          '), Target=Odesc); ! Space in


!+
!   The pointers have been backed up to the start, and we have the total
!   length of this DAP message.  Pump it out.
!-
    DECR I FROM .Msg_Len-1 TO 0
    DO  BEGIN
        IF (.Odesc[Str$h_Maxlen]-.Odesc[Str$h_Length]) LEQ 7
        THEN
            BEGIN                       !Add <CR><LF> & put out
            $str_Append(String=D_Crlf,Target=Odesc);

            Put_Trace ( String=Odesc);

            $str_Desc_Init(Descriptor=Odesc,Class=Bounded,
                            String=(.twidth+3,Ch$ptr(Tbuff)));

            $str_Copy(String='          ', Target=Odesc); ! Space in
            
            END;

        %IF %SWITCHES(TOPS20)
        %THEN
            ! Use NOUT jsys, $Str_Ascii is broken in nonzero sections

            BEGIN
            Nout( CH$PTR(Noutbuf), Get_Byte(Tdd), No_Lfl+Fld(4,No_Col)+8 );
            $Str_Append( String=(4,CH$PTR(Noutbuf)), Target=Odesc);
            END

        %ELSE       ! beware. this won't work outside section 0      !m572
            $str_Append(String=$str_Ascii(Get_Byte(Tdd),
                                          Base8,Leading_Blank,Length=4),
                        Target=Odesc);
        %FI
        END;

    $str_Append (String=D_Crlf,Target=Odesc);

    Put_Trace ( String=Odesc );

    IF .truncated NEQ 0                       ! Message was real long
    THEN Put_Trace ( String=$str_Concat(' ... (',$str_Ascii(.truncated),
                                      ' more bytes)', D_Crlf));    !m572

END;  !OMsg
ROUTINE OLen (P_Dd: REF $Dap_Descriptor,Msg_Len) = 

BEGIN


    BIND Twidth=D$gtwidth;
    BIND Tdd = .P_dd: $Dap_Descriptor;

!   Tag and output the decimal number of bytes in this message

    $LOGIT(' Len: ');
    Nout( .Tjfn, .Msg_Len,10);
    IF .D$GTRACE+3 EQL 0 THEN
    BEGIN
	  DECR I FROM .Msg_Len-1 TO 0
	  DO Get_Byte(Tdd);
	  RETURN 1
   END
   ELSE RETURN 0;

END;	!OLen

END				!End of module
ELUDOM