Trailing-Edge
-
PDP-10 Archives
-
DECNET-20_V2.1_2020_7-20-82
-
decnet/ncu.mac
There are 3 other files named ncu.mac in the archive. Click here to see a list.
;<DECNET>NCU.MAC.3, 6-Oct-81 09:56:42, EDIT BY GRANT
;Change Q1 to W1 in PRTINF; add ENDAV.
;<JENNESS.NETCON>NCU.MAC.2, 31-Jan-80 13:28:12, Edit by JENNESS
; Update copyright date
;<JENNESS>NCU.MAC.15, 14-Nov-79 13:46:04, Edit by JENNESS
; Fix RQLERR to not use the ASUBR macro. This messed up register 15 which
; was pointing to the stack framed needed to load RQLREC properly.
;<JENNESS>NCU.MAC.14, 14-Nov-79 11:21:33, Edit by JENNESS, PLATUKIS
; Change RQLERR to properly release the record block. Fix accidental call
; to FATAL.ERROR if none existed. Same fix to RQLINT also.
;<JENNESS>NCU.MAC.10, 30-Oct-79 17:06:12, Edit by JENNESS
; Change REQLOG to NOT return a success code across the link. The NICE
; protocol has NEVER needed this.
;<JENNESS>NCU.MAC.9, 30-Oct-79 10:42:41, Edit by JENNESS, PLATUKIS
; Add TOPFRE routine to release a topology table.
;<JENNESS>NCU.MAC.7, 23-Oct-79 10:56:23, Edit by PLATUKIS
; Fix ADVTOP to give proper error return, instead of trying to release
; memory it doesn't have.
;<JENNESS>NCU.MAC.6, 23-Oct-79 10:53:58, Edit by PLATUKIS
; Fix TSTL05 to properly loop over multiple DN20 front ends.
;<JENNESS>NCU.MAC.6, 23-Oct-79 10:52:01, Edit by PLATUKIS
; Fix to STODMC to put a -1 byte pointer as first word. Needed since
; SYSERR treats DMCs the same a KMCs, and DMCs don't have sub-device data.
;<JENNESS>NCU.MAC.6, 23-Oct-79 10:48:17, Edit by PLATUKIS
; Fix hardware event message processing to properly release chunks allocated
; for device and register blocks.
;<JENNESS>NCU.MAC.3, 4-Oct-79 08:18:35, Edit by JENNESS
; Add SPRIW calls to set NCU fork priority higher to make loading/dumping
; run faster on loaded systems. This will get a DN20 back up faster.
;<JENNESS>NCU.MAC.3, 4-Oct-79 08:18:30, Edit by JENNESS
; Change ASCLIN to suppress station number if 0 (no multi-drop).
;<JENNESS>NCU.MAC.2, 1-Oct-79 13:52:47, Edit by JENNESS
; Change LSTBLD so that host name byte string count is correctly calculated
; for strings of exact match of 6 characters.
;<SROBINSON.NETCON>NCU.MAC.6, 26-Sep-79 15:28:56, Edit by JENNESS
; TCO 4.2489 Change PRTINF so that it returns real NICE line status
; codes instead of the garbage it was returning.
;<4.UTILITIES>NCU.MAC.245, 23-Aug-79 13:37:46, Edit by JENNESS
; Change ASGREC to assign a huge buffer to stop memory management
; overruns.
;<4.UTILITIES>NCU.MAC.244, 8-Aug-79 11:20:45, Edit by JENNESS
; Change all failures of RELFRE to FATAL.ERRORs
;<4.UTILITIES>NCU.MAC.243, 10-Jul-79 10:37:40, Edit by SROBINSON
;TCO 4.2320 Correct "Invalid Line ID" when it isn't invalid
;<4.UTILITIES>NCU.MAC.242, 20-Jun-79 16:08:01, EDIT BY KIRSCHEN
;ADD EVENT LOGGING COMMANDS
;<4.UTILITIES>NCU.MAC.241, 7-May-79 11:19:14, EDIT BY KIRSCHEN
;FIX TYPO'S IN DEFRQD
;<4.UTILITIES>NCU.MAC.240, 27-Apr-79 15:43:07, EDIT BY KIRSCHEN
;COMPUTE OFFSET TO LOG DATA FOR CHK11 ENTRIES CORRECTLY
;<4.UTILITIES>NCU.MAC.239, 20-Apr-79 14:27:20, EDIT BY KIRSCHEN
;USER CORRECT ENTRY TYPE FOR CHK11 ENTRIES; COMPUTE CORRECT POINTER
; TO LOG DATA
;<4.UTILITIES>NCU.MAC.238, 17-Mar-79 14:56:25, EDIT BY KIRSCHEN
;FIX EVENT LOGGING BUGS
;<4.UTILITIES>NCU.MAC.237, 10-Mar-79 14:32:32, EDIT BY KONEN
;UPDATE COPYRIGHT FOR RELEASE 4
;<4.UTILITIES>NCU.MAC.236, 4-Feb-79 22:06:06, EDIT BY KIRSCHEN
;FIX SPURIOUS "?INTERNAL NETCON ERROR" MESSAGE
;<4.UTILITIES>NCU.MAC.235, 2-Feb-79 14:46:07, EDIT BY KIRSCHEN
;CORRECT EXTRACTION OF LINE ID FROM EVENT LOG MESSAGES TO CONFORM TO SPEC
;<4.UTILITIES>NCU.MAC.234, 1-Feb-79 10:22:24, EDIT BY KIRSCHEN
;ADD ROUTINE TO STORE KDZ EVENT LOG DATA
;<4.UTILITIES>NCU.MAC.233, 30-Jan-79 09:17:14, EDIT BY ENGEL
;FIX AUTO DUMP/LOAD BUG BY SETTING NDDIP/NDLIP AFTER NIB LOCKED
;<4.UTILITIES>NCU.MAC.232, 30-Jan-79 09:09:49, EDIT BY KIRSCHEN
;ADD CODE TO STORE KDP REGISTERS ON EVENT LOG MESSAGE
;<4.UTILITIES>NCU.MAC.230, 14-Jan-79 20:46:50, EDIT BY KIRSCHEN
;UPDATE NODE JSYS SYMBOLS
;<4.UTILITIES>NCU.MAC.229, 8-Jan-79 22:02:44, EDIT BY KIRSCHEN
;automate topology reporting
;<4.UTILITIES>NCU.MAC.228, 4-Jan-79 13:08:23, EDIT BY KIRSCHEN
;PASS NODE NAME AND HOST PARAMETERS ON LOAD
;<4.UTILITIES>NCU.MAC.227, 2-Jan-79 15:27:14, EDIT BY ENGEL
;FIX SHOW STATE LINE KDP_0_0 PROBLEM
;<4.UTILITIES>NCU.MAC.201, 26-Dec-78 11:03:44, EDIT BY ENGEL
;<4.UTILITIES>NCU.MAC.200, 26-Dec-78 10:55:47, EDIT BY ENGEL
;ADD TRANSFER ADDRESS CHECK. (DO NOT SEND "TRANSFER" LINE SERV. FOR ODD ADDR.
;<4.UTILITIES>NCU.MAC.189, 22-Dec-78 10:30:35, EDIT BY ENGEL
;ADD AUTO DUMP/LOAD CODE
;<4.UTILITIES>NCU.MAC.171, 15-Dec-78 09:09:33, EDIT BY KIRSCHEN
;BREAK NETCON INTO TWO MODULES NCP AND NCU; ADD RELEASE 4 FEATURES.
TITLE NCU - TOPS20 Network Information and Control Exchange (NICE) Process
SUBTTL D. KIRSCHEN/P. HURLEY FEBRAURY, 1977
SEARCH NETPAR
SEARCH MONSYM,MACSYM,ORNMAC,GLXMAC,MACTEN
.REQUIRE SYS:MACREL
SALL
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) 1976,1977,1978,1979,1980 BY DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
; THE FOLLOWING SYMBOLS ARE ALL DEFINED IN MODULE NCP.MAC
EXTERN GETFRE, RELFRE, ASGPAG, RELPGA, CPYASC, SAVPQ
EXTERN LIDPRT, WRNING, ELOCK, DLOCK, LOKNOD, ULKNOD
EXTERN MONINI, TOPCHK, FRELST, FNDDSP
EXTERN OPRMES, SAVQ, SAVT, ERROR, NETCON
EXTERN NIBTAB, SYSNAM
EXTERN .ERR21, .ERR29
SUBTTL Initialization
; NICE PROCESS IS INITIALLY STARTED HERE - READ PARAMETERS AND DO INITIALIZATION
NCU:: MOVE T1,[.PRARD,,.FHSLF] ;GET "READ PARAMETERS" FUNCTION CODE
MOVEI T2,T3 ;GET ADDRESS OF ARGUMENT BLOCK
MOVEI T3,2 ;ARGUMENT BLOCK CONTAINS TWO ITEMS
PRARG ;READ STARTUP PARAMETERS
ERJMP [HALTF] ;FAILED, NO RECOURSE.
; THE PRARG ARGUMENT BLOCK CONTAINS TWO WORDS:
;
; 1. JFN OF LOGICAL LINK FROM REQUESTING TASK TO NCU
; 2. LENGTH,,ADDRESS OF PER-NCU STORAGE AREA
; SET UP STACK IN BEGINNING OF OUR STORAGE AREA
HRRI P,-1(T4) ;SET UP AN IOWD FOR THE
HRLI P,-PDLEN ; PUSHDOWN STACK
; SET UP ADDRESS OF GENERAL STORAGE AREA FOR VARIABLES
MOVEI P5,PDLEN(T4) ;GET STARTING ADDRESS OF DATA AREA
MOVEI T1,VARLEN(P5) ;GET STARTING ADDRESS OF STRING STORAGE AREA
HRLI T1,(POINT 7,) ;FORM POINTER TO STRING AREA
MOVEM T1,STRPTR ;SAVE STRING POINTER
HLRZ T1,T4 ;GET LENGTH OF DATA AREA
ADDI T1,-1(T4) ;COMPUTE LAST ADDRESS IN DATA AREA
MOVEM T1,STREND ;SAVE AS FINAL LOCATION IN STRING AREA
HLRZ T1,T4 ;GET ORIGINAL LENGTH OF STORAGE AREA
SUBI T1,PDLEN+VARLEN ;COMPUTE NUMBER OF WORDS IN STRING STORAGE AREA
MOVEM T1,STRSIZ ;SAVE SIZE OF STRING STORAGE AREA
MOVEM T3,REQLNK ;SAVE LOGICAL LINK FROM REQUESTOR
; ..
; ..
; THE FOLLOWING LOOP IS PERFORMED FOR EACH OPERATION INITIATED BY
; THE REQUESTING TASK (THE SAME LOGICAL LINK MAY BE USED TO REQUEST
; SEVERAL SEQUENTIAL OPERATIONS).
; INPUT THE NICE MESSAGE FROM THE REQUESTOR AND CALL DISPATCHING ROUTINE
NCU010: CALL CLRMSG ;GO CLEAR THE MESSAGE AREA
MOVE T1,REQLNK ;GET LOGICAL LINK (JFN)
MOVEI T2,MSGBLK ;GET ADDRESS OF MESSAGE BLOCK
HRLI T2,(POINT 8,) ;FORM POINTER TO MESSAGE BLOCK
MOVNI T3,MSGSIZ*BPWRD ;GET MAX COUNT
SINR ;INPUT THE MESSAGE
ERJMP [MOVX T2,.NRCME ;ON FAILURE, GET "COMMUNICATIONS ERROR" CODE
BOUT ;RETURN RESPONSE TO REQUESTING TASK
ERJMP [HALTF] ;NOTHING ELSE LEFT TO DO
HALTF ] ;DONE, NOTHING ELSE LEFT TO DO
MOVEI T2,MSGSIZ*BPWRD(T3) ;GET NUMBER OF BYTES IN THE MESSAGE
MOVE T1,[POINT 8,MSGBLK] ;GET POINTER TO START OF MESSAGE
LDB T3,[POINT 8,MSGBLK,7] ;GET NICE FUNCTION CODE
CALL NCUDSP ;GO DISPATCH ACCORDING TO FUNCTION REQUESTED
SKIPA T4,T1 ;FAILED, RETURN CODE ALREADY IN T1
JRST NCU010 ;SUCCESS, GO PROCESS NEXT FUNCTION
; HERE TO RETURN AN ERROR RETURN CODE WHEN THE OPERATION FAILED
MOVE T1,REQLNK ;GET LOGICAL LINK TO REQUESTING TASK
MOVE T2,[POINT 8,T4,27] ;GET POINTER TO SINGLE BYTE RETURN CODE
MOVNI T3,1 ;RETURN CODE IS JUST ONE SINGLE BYTE
SOUTR ;SEND THE RETURN CODE TO REQUESTING TASK
ERJMP [HALTF] ;IF FAILED, JUST QUIT, SINCE NOTHING ELSE TO
; DO IF CANNOT REPORT FAILURE TO REQUESTOR
JRST NCU010 ;DONE WITH THIS REQUEST, LOOP BACK FOR NEXT MSG
;NCUDSP - ROUTINE TO DISPATCH TO NSP MESSAGE HANDLING ROUTINE
;
;ACCEPTS IN T1/ NICE FUNCTION CODE FROM MESSAGE
; T2/ POINTER TO START OF NICE MESSAGE
; T3/ NUMBER OF BYTES IN NICE MESSAGE
; CALL NCUDSP
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, OPERATION COMPLETED.
NCUDSP: ASUBR <DSPPTR,DSPCNT,DSPFCN>
MOVE T4,[-NCTSIZ,,NICTAB] ;SET UP TO SEARCH NICE FUNCTION CODE TABLE
NSPD10: HLRZ T1,(T4) ;GET A KNOWN NICE FUNCTION CODE
CAMN T1,DSPFCN ;FOUND FUNCTION CODE IN THIS NICE MESSAGE ?
JRST NSPD40 ;YES, GO DISPATCH TO PROCESSING ROUTINE
AOBJN T4,NSPD10 ;LOOP OVER ALL KNOWN NICE FUNCTION CODES
RETBAD (.NRFNC) ;NOT FOUND, RETURN "INVALID FUNCTION"
; HERE TO DISPATCH TO THE PROPER PROCESSING ROUTINE FOR THE NICE MESSAGE
NSPD40: MOVE T1,DSPPTR ;GET POINTER TO NICE MESSAGE
MOVE T2,DSPCNT ;GET COUNT OF BYTES IN MESSAGE
HRRZ T4,(T4) ;GET ADDRESS OF PROCESSING ROUTINE
CALLRET (T4) ;GO HANDLE THE NSP MESSAGE
; NICE FUNCTION TABLE
NICTAB: .NCRQL,,REQDLL ;REQUEST DOWN-LINE LOAD
.NCRQD,,REQDMP ;REQUEST UP LINE DUMP
.NCRED,,REQRED ;REQUEST TO READ INFORMATION
.NCZRO,,REQZRO ;REQUEST TO ZERO COUNTERS
.NCLSV,,REQLSV ;REQUEST FOR LINE SERVICE
.NCSET,,REQSET ;REQUEST TO SET PARAMETER
.NCLOG,,REQLOG ;REQUEST TO LOG DATA
NCTSIZ==.-NICTAB
SUBTTL NICE Process -- Down-Line Load
;REQDLL - ROUTINE TO PROCESS REQUESTS FOR A DOWN-LINE LOAD OPERATION
;
;ACCEPTS IN T1/ POINTER TO START OF NICE DOWN-LINE LOAD REQUEST MESSAGE
; T2/ NUMBER OF BYTES IN MESSAGE
; CALL REQDLL
;RETURNS: +1 FAILED, T1/ NICE RETURN CODE
; +2 SUCCESS
REQDLL: ASUBR <RQLPTR,RQLCNT,RQLLNK,RQLREC>
; EXTRACT THE FIELDS PRESENT IN THE NICE DOWN-LINE LOAD REQUEST MESSAGE
SETZM RQLLNK ;INITIALIZE LOGICAL LINK CELL
SETZM RQLREC ;INITIALIZE ADDRESS OF RECORD BLOCK
MOVE T1,RQLPTR ;GET POINTER TO START OF NICE MESSAGE
MOVE T2,RQLCNT ;GET NUMBER OF BYTES IN THE MESSAGE
CALL GETRQL ;GO DECODE THE FIELDS IN THE REQUEST LOAD MSG
RETBAD (.NRIMF) ;FAILED, RETURN "INVALID MESSAGE FORMAT"
; IF LOADING ALL KNOWN NODES, LOOP OVER EACH NODE IN THE CONFIGURATION DATABASE
RQL010: CALL DEFRQL ;GO FILL IN DEFAULTS FROM CONFIGURATION DATABASE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
; LOCK THE TARGET NODE
MOVE T1,RQLTGT ;GET POINTER TO ASCIZ TARGET NODE NAME
CALL GETNIB ;GET NIB ADDRESS FOR NODE BEING LOADED
RETBAD (.NRICF) ;FAILED, RETURN ERROR
MOVEM T1,RQLLNK ;SAVE THE NIB ADDRESS
MOVX T2,RM%PRI ;USE PRIMARY RESOURCE
CALL LOKNOD ;LOCK THE TARGET NODE
MOVE T1,RQLLNK ;GET THE NIB ADDRESS
SETONE NDLIP,(T1) ;SHOW LOAD IN PROGRESS
SETZM RQLLNK ;ZERO HOLDING CELL
; GET A LINK TO THE NICE PROCESS ON THE SERVER NODE
MOVE T1,RQLSRV ;GET POINTER TO ASCIZ NAME OF SERVER NODE
CALL GETLNK ;GO GET A LOGICAL LINK TO ANOTHER NICE PROCESS
RETBAD (.NRPNA) ;FAILED, RETURN "PROCESS NOT AVAILABLE"
MOVEM T1,RQLLNK ;SAVE LOGICAL LINK NUMBER
; IF NECESSARY, TRIGGER THE BOOTSTRAP ROM AT THE TARGET NODE
MOVE T4,RQLOPT ;GET OPTIONS FROM DOWN-LINE LOAD REQUEST
LOAD T3,LO%ROM,T4 ;GET ROM FIELD
CAIE T3,.LOTBD ;TRIGGER BOOT, DEFAULT PROGRAM DATA ?
CAIN T3,.LOTBP ; OR TRIGGER BOOT & GET PROGRAM DATA RETURNED ?
JRST [ MOVE T1,RQLLNK ;YES, GET LOGICAL LINK NUMBER
CALL TRGGER ;TRIGGER THE BOOTSTRAP ROM AT THE TARGET NODE
LODERR () ;FAILED, RETURN ERROR TO CALLER
JRST .+1 ] ;DONE, BOOTSTRAP ROM HAS BEEN TRIGGERED
MOVEI T1,.FHSLF ;Point to this process
MOVEI T2,0102 ;Only want to run in Q 1 (very high)
SPRIW ;Set the fork scheduling priority
; ..
; ..
; AT THIS POINT, THE ACTUAL LOADING OPERATION BEGINS. THE SEQUENCE OF
; EVENTS IS AS FOLLOWS:
;
; 1. A NICE "INITIATE-LOAD-DIALOG" MESSAGE IS SENT TO THE SERVER NCU
; 2. THE FILE TO BE LOADED IS OPENED.
; 3. FOR EACH "BLOCK" IN THE .BIN FILE,
;
; 3.1 THE LOAD ADDRESS IS SENT USING A NICE LINE SERVICE
; MESSAGE (SET BASE ADDRESS OPTION).
; 3.2. THE DATA IN THE "BLOCK" IS SENT TO THE SERVER NODE NCU
; USING A NICE LINE SERVICE MESSAGE (MEMORY IMAGE OPTION).
; 3.3 WHEN ALL DATA "BLOCKS" IN THE .BIN FILE HAVE BEEN
; LOADED IN THIS MANNER, THE TRANSFER ADDRESS IS
; OBTAINED FROM THE LAST BLOCK. A NICE LINE SERVICE
; MESSAGE IS THEN USED TO SEND THIS ADDRESS AND ANY
; PARAMETERS FOR THE NODE JUST LOADED TO THE SERVER
; NODE NCU (SET PARAMETERS AND TRANSFER OPTION).
;
; 4. THE SERVER NODE NCU REPLIES WITH AN END-OF-DIALOG NICE
; LINE SERVICE MESSAGE. THIS MAY CONTAIN A REQUEST FOR
; ANOTHER PROGRAM TO BE LOADED, AND THE PROCESS REPEATS FROM
; STEP NUMBER 1 FOR THIS NEXT PROGRAM.
; ASSEMBLE AND SEND A NICE "LINE SERVICE" MESSAGE TO INITIATE A LOAD DIALOG
RQL020: CALL MAKLOD ;GO ASSEMBLE A NICE LINE SERVICE MESSAGE
LODERR () ;FAILED, RETURN ERROR TO CALLER
MOVN T3,T2 ;GET -COUNT
MOVE T2,T1 ;COPY POINTER TO START OF DATA MESSAGE
MOVE T1,RQLLNK ;GET LOGICAL LINK (JFN)
SOUTR ;SEND LINE SERVICE MESSAGE TO SERVER NODE NCU
ERJMP [LODERR (.NRCME)] ;ON FAILURE, RETURN "COMMUNICATIONS ERROR"
; NOW RECEIVE AND CHECK THE RETURN CODE FROM THE SERVER NODE NCU
MOVE T1,RQLLNK ;GET LOGICAL LINK (JFN)
BIN ;WAIT FOR A REPLY FROM THE SERVER NODE NCU
ERJMP [LODERR (.NRCME)] ;RETURN "COMMUNICATIONS ERROR" ON FAILURE
MOVE T1,T2 ;COPY THE RETURN CODE
CAIE T1,.NRSUC ;SUCCESS ?
LODERR () ;NO, USE NICE RETURN CODE FROM SERVER NODE
; ..
; ..
; TOP OF LOOP OVER EACH FILE TO BE LOADED
; OPEN THE INPUT FILE TO BE LOADED AND DO INITIAL SET UP
MOVX T1,OF%RD ;NOTE THAT FILE IS TO BE READ
CALL ASGREC ;GO ASSIGN A RECORD BLOCK FOR THIS I/O OPERATION
LODERR (.NRRES) ;FAILED, RESOURCE ERROR
MOVEM T1,RQLREC ;SAVE ADDRESS OF RECORD BLOCK
CALL SETPGM ;GO GET POINTER TO FILESPEC TO BE LOADED
LODERR (.NRICF) ;FAILED, RETURN "INVALID CONFIGURATION FILE"
CALL OPNIFL ;GO OPEN THE INPUT FILE
LODERR (.NRIFL) ;FAILED, RETURN "INVALID FILE"
MOVE T4,RQLREC ;GET ADDRESS OF RECORD BLOCK
STOR T1,RBJFN,(T4) ;STORE THE JFN OF THE FILE TO BE LOADED
STOR T2,RBTYP,(T4) ;STORE FILE FORMAT TYPE
SETONE RBCAD,(T4) ;SET CURRENT ADDRESS TO TOP OF MEMORY
; TO FORCE NEW BASE ADDRESS REQUIRED
MOVE T1,RQLLNK ;GET LOGICAL LINK (JFN) TO SERVER NCU
CALL INTSET ;SET UP INTERRUPT SYSTEM
RETBAD () ;FAILED, RETURN ERROR
; TOP OF LOOP OVER ALL BLOCKS IN THE FILE. INPUT THE NEXT BLOCK
RQL030: MOVE T1,RQLREC ;GET ADDRESS OF RECORD BLOCK
HRLI T4,(POINT 8,) ;FORM POINTER TO START OF DATA
HRRI T4,.RBDAT(T1) ; AREA IN RECORD BLOCK
STOR T4,RBPTR,(T1) ;STORE INITIAL POINTER
LOAD T2,RBTYP,(T1) ;GET FILE FORMAT TYPE
CALL @[ R ; 0 - ILLEGAL
Z INPLDA ;LDA FORMAT
Z INPTSK ;TASK IMAGE FORMAT
Z INPDMP ;NETCON DUMP FILE FORMAT
](T2) ;READ A BLOCK FROM THE FILE ACCORDING TO FORMAT
LODERR (.NRIOE) ;FAILED, RETURN "FILE I/O ERROR"
MOVE T4,RQLREC ;GET ADDRESS OF RECORD BLOCK
JE RBCNT,(T4),RQL070 ;IF END OF DATA, GO SEND "TRANSFER" MESSAGE
; SEE IF WE NEED TO SET A NEW BASE ADDRESS
MOVE T4,RQLREC ;GET ADDRESS OF RECORD BLOCK
LOAD T1,RBNAD,(T4) ;GET MEMORY ADDRESS AT WHICH TO LOAD THIS BLOCK
LOAD T2,RBCAD,(T4) ;GET CURRENT ADDRESS
CAMN T2,T1 ;DO WE HAVE TO SET A NEW BASE ADDRESS?
JRST RQL035 ;NO-- JUST UPDATE CURRENT ADDRESS
; ASSEMBLE AND SEND A "SET BASE ADDRESS" DIALOG MESSAGE TO SERVER NODE
CALL MAKBAS ;GO ASSEMBLE A "SET BASE ADR" LINE SERVICE MSG
MOVN T3,T2 ;GET -NUMBER OF BYTES IN THE MESSAGE
MOVE T2,T1 ;COPY POINTER TO THE MESSAGE
MOVE T1,RQLLNK ;GET LOGICAL LINK (JFN)
SOUTR ;SEND THE MESSAGE TO THE SERVER NODE NCU
ERJMP [LODERR (.NRCME)] ;RETURN "COMMUNICATIONS ERROR" ON FAILURE
; ..
; ..
; UPDATE CURRENT ADDRESS IN "RBCAD" TO REFLECT NEW ADDRESS FROM
; "RBNAD" PLUS COUNT OF THIS RECORD IN "RBCNT"
RQL035: MOVE T4,RQLREC ;GET ADDRESS OF RECORD BLOCK
LOAD T1,RBNAD,(T4) ;GET NEW ADDRESS
LOAD T2,RBCNT,(T4) ;GET CURRENT ITEM COUNT
ADD T1,T2 ;COMPUTE NEW BASE ADDRESS AFTER THIS RECORD
STOR T1,RBCAD,(T4) ;UPDATE CURRENT ADDRESS
; NOW SEND THE MEMORY IMAGE DATA IN "MEMORY IMAGE" LINE SERVICE MESSAGES
RQL040: MOVE T1,RQLREC ;GET ADDRESS OF RECORD BLOCK
MOVE T2,RQLCPU ;GET CPU TYPE OF TARGET NODE
CALL MAKIMG ;GO MAKE A LINE SERVICE "MEMORY IMAGE" MESSAGE
LODERR () ;FAILED, RETURN ERROR
MOVN T3,T2 ;GET - COUNT
MOVE T2,T1 ;GET POINTER TO MESSAGE
MOVE T1,RQLLNK ;GET LOGICAL LINK TO SERVER NODE NCU
SOUTR ;SEND THE "MEMORY IMAGE" MESSAGE
ERJMP [LODERR (.NRCME)] ;RETURN "COMMUNICATIONS ERROR" ON FAILURE
; HERE TO SEE IF THERE IS MORE DATA TO BE SENT IN THIS BLOCK
MOVE T4,RQLREC ;GET ADDRESS OF RECORD BLOCK
JN RBCNT,(T4),RQL040 ;LOOP BACK IF MORE DATA TO SEND
JRST RQL030 ;GO INPUT THE NEXT DATA BLOCK IN THE FILE
; HERE AT END OF DATA - SEND "SYSTEM PARAMETERS AND TRANSFER ADR" MESSAGE
RQL070: MOVX T1,.FHSLF ;GET OUR FORK HANDLE
MOVX T2,1B<RQLCHN> ;GET DOWN LINE LOAD CHANNEL
DIC ;DISABLE DOWN LINE LOAD CHANNEL
MOVE T1,RQLREC ;GET ADDRESS OF RECORD BLOCK
LOAD t4,RBXAD,(t4) ;GET TRANSFER ADDRESS FROM FILE
TRNE t4,1 ;IS THE ADDRESS ODD?
JRST [ MOVE T2,[POINT 8,[BYTE (8).LMEND,.NRSUC]] ;YES - END-OF-DIALOGUE
MOVNI T3,2 ;WE ARE SENDING 2 BYTES
MOVE T1,RQLLNK ;GET LOGICAL LINK JFN
SOUTR ;OUTPUT THE "END-OF"DIALOGUE" MSG
ERJMP [LODERR (.NRCME)] ;RETURN COMMUNICATION ERROR
JRST RQL071] ;WAIT FOR RESPONSE
CALL MAKXFR ;NO - GO MAKE A "TRANSFER" LINE SERVICE MESSAGE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVN T3,T2 ;GET -COUNT
MOVE T2,T1 ;COPY POINTER TO START OF MESSAGE
MOVE T1,RQLLNK ;GET LOGICAL LINK (JFN)
SOUTR ;OUTPUT THE MESSAGE, FORCE ALL DATA OUT
ERJMP [LODERR (.NRCME)] ;RETURN "COMMUNICATIONS ERROR" ON FAILURE
; PROGRAM LOAD COMPLETE - WAIT FOR END OF DIALOG MESSAGE FROM SERVER NCU
RQL071: CALL CLRMSG ;CLEAR THE MESSAGE AREA
MOVE T1,RQLLNK ;GET LOGICAL LINK (JFN)
MOVE T2,[POINT 8,MSGBLK] ;GET POINTER TO WHERE MESSAGE SHOULD GO
MOVNI T3,MAXNIC ;GET -MAX COUNT
SINR ;INPUT THE REPLY FROM THE SERVER NODE NCU
ERJMP [LODERR (.NRCME)] ;IF FAILED, RETURN "COMMUNICATIONS ERROR"
; VERIFY THAT RESPONSE WAS "END OF DIALOG" AND SEE IF ANOTHER LOAD WAS REQUESTED
MOVE T1,[POINT 8,MSGBLK] ;GET POINTER TO START OF REPLY MESSAGE
MOVEI T2,MAXNIC(T3) ;COMPUTE NUMBER OF BYTES RETURNED
SUBI T2,2 ;DECREMENT COUNT FOR TYPE CODE AND RETURN CODE
JUMPL T2,[RETBAD (.NRPRO)] ;RETURN "PROTOCOL ERROR" IF NOT ENOUGH BYTES
ILDB T4,T1 ;YES, GET DIALOG MESSAGE TYPE CODE (.LSXXX)
CAIE T4,.LMEND ;END OF DIALOG REPLY ?
LODERR (.NRPRO) ;NO, NICE PROTOCOL ERROR
ILDB T4,T1 ;GET RETURN CODE
CAIE T4,.NRSUC ;SUCCESS ?
JRST [ MOVE T1,T4 ;NO, GET RETURN CODE FROM SERVER NCU
LODERR () ] ;RETURN THE CODE TO CALLER
; ..
; ..
; DETERMINE IF ANOTHER PROGRAM IS TO BE LOADED
MOVEM T1,RQLPTR ;SAVE POINTER TO ANY REMAINING MESSAGE DATA
MOVEM T2,RQLCNT ;SAVE COUNT OF BYTES LEFT IN MESSAGE
MOVE T4,RQLREC ;GET ADDRESS OF RECORD BLOCK
LOAD T1,RBJFN,(T4) ;GET JFN OF FILE JUST LOADED
CLOSF ;CLOSE THE FILE
JFCL ;FAILED, IGNORE FAILURE
SETZRO RBJFN,(T4) ;NOTE THAT WE'RE NO LONGER USING THE JFN
MOVE T1,RQLREC ;GET ADDRESS OF RECORD BLOCK FOR THIS LOAD
CALL RELFRE ;RELEASE THE FREE SPACE
FATAL.ERROR ; Die on release failure
SETZM RQLREC ;NOTE THAT WE NO LONGER HAVE A RECORD BLOCK
MOVE T2,[POINT 8,[BYTE (8).LMEND,.NRSUC]] ;CONFIRM "END-OF-DIALOGUE"
MOVNI T3,2 ;WE ARE SENDING 2 BYTES
MOVE T1,RQLLNK ;GET LOGICAL LINK JFN
SOUTR ;OUTPUT THE "END-OF"DIALOGUE" MSG
ERJMP [LODERR (.NRCME)] ;RETURN COMMUNICATION ERROR
SKIPG RQLCNT ;MORE BYTES IN REPLY MESSAGE ?
JRST RQL080 ;NO, GO CLEAN UP AND RETURN TO CALLER
MOVE T1,RQLPTR ;YES, RESTORE POINTER
MOVE T2,RQLCNT ;RESTORE COUNT
CALL GETPDT ;GO EXTRACT THE PROGRAM DATA FROM MESSAGE
LODERR () ;FAILED, RETURN ERROR CODE TO CALLER
JRST RQL020 ;LOOP BACK TO LOAD NEXT FILE
; HERE TO CLEAN UP AND RETURN TO DISPATCHING CODE
RQL080: MOVE T1,RQLLNK ;YES, GET LOGICAL LINK (JFN) TO SERVER NCU
CLOSF ;DISCONNECT THE LOGICAL LINK
JFCL ;IGNORE FAILURE, LINK NO LONGER NEEDED
SETZM RQLLNK ;NOTE THAT WE NO LONGER HAVE A LINK TO SERVER
MOVX T1,.NRSUC ;GET NICE PROTOCOL SUCCESS RETURN CODE
CALL SYRLOD ;MAKE A SYSERR ENTRY FOR THIS LOAD
; UNLOCK THE TARGET NODE NIB
MOVE T1,RQLTGT ;GET POINTER TO ASCIZ TARGET NODE NAME
CALL GETNIB ;GO GET THE ADDRESS OF THE TARGET NODE NIB
JRST RQL085 ;FAILED, JUST PROCEED.
MOVX T2,RM%PRI ;USE PRIMARY RESOURCE
SETZRO NDLIP,(T1) ;AUTO LOAD DONE
CALL ULKNOD ;UNLOCK THE NODE
; SEND BACK A NICE "SUCCESS" RETURN CODE TO REQUESTING TASK
RQL085: MOVE T1,REQLNK ;GET LOGICAL LINK (JFN) TO REQUESTING TASK
MOVE T2,[POINT 8,[BYTE (8) .NRSUC]] ;GET POINTER TO SUCCESS CODE
MOVNI T3,1 ;RETURN CODE IS A SINGLE BYTE
SOUTR ;SEND BACK THE RETURN CODE
ERJMP RSKP ;IF FAILED, NOTHING ELSE TO DO
MOVE T1,RQLTGT ;GET POINTER TO ASCIZ TARGET NODE NAME
CALL TOPCHK ;INITIATE MONITORING OF TOPOLOGY ?
JRST RQL090 ;NO, FINISH LOADING PROCESS
MOVE T1,RQLTGT ;GET POINTER TO ASCIZ TARGET NODE NAME
CALL MONINI ;INITIATE MONITORING OF TOPOLOGY
JFCL ;FAILED
RQL090: SETOM LOGFLG ;NOTE THAT LOGGING SHOULD NOW BE DONE
RETSKP ;LOAD IS FINISHED. RETURN SUCCESS.
; HERE ON INTERRUPT INDICATING UNEXPECTED RESPONSE FROM SERVER NCU
RQLINT: MOVEI T1,RQINT1 ;GET DEBRK ADDRESS
MOVEM T1,RETPC1 ;SAVE NEW DEBRK ADDRESS
DEBRK ;DISMISS INTERRUPT
RQINT1: CALL CLRMSG ;GO CLEAR THE MESSAGE AREA
MOVE T1,RQLLNK ;GET LOGICAL LINK TO SERVER NCU
MOVE T2,[POINT 8,MSGBLK] ;GET POINTER TO WHERE MESSAGE GOES
MOVNI T3,MAXNIC ;GET MAX COUNT
SINR ;READ THE DATA
ERJMP [ MOVX T1,.NRCME ;FAILED, GET "COMMUNCIATIONS ERROR"
JRST RQINT2 ] ;RETURN ERROR TO ORIGINATOR OF REQUEST
MOVEI T2,MAXNIC(T3) ;GET NUMBER OF BYTES RECEIVED
CAIE T2,2 ;TWO BYTES EXPECTED
JRST [ MOVX T1,.NRPRO ;FAILED, GET "PROTOCOL ERROR"
JRST RQINT2 ] ;RETURN ERROR TO ORIGINATOR OF REQUEST
MOVE T4,[POINT 8,MSGBLK] ;GET POINTER TO START OF MESSAGE
ILDB T1,T4 ;GET TYPE CODE
CAIE T1,.LMEND ;END OF DIALOG ?
JRST [ MOVX T1,.NRPRO ;NO, GET "PROTOCOL ERROR"
JRST RQINT2 ] ;RETURN ERROR TO ORIGINATOR OF REQUEST
; RETURN AN ERROR RETURN CODE
RQINT2: MOVE T1,REQLNK ;GET LOGICAL LINK TO REQUESTING TASK
MOVE T2,T4 ;GET POINTER TO RETURN CODE
MOVNI T3,1 ;RETURN CODE IS JUST ONE SINGLE BYTE
SOUTR ;SEND THE RETURN CODE TO REQUESTING TASK
JFCL
SKIPE T1,RQLLNK ;DISCONNECT LOGICAL LINK TO THE
CLOSF ; SERVER NCU
JFCL ;IGNORE ERRORS
SKIPE T1,RQLREC ;CLOSE ANY OPEN INPUT FILE JFN'S
CALL [ LOAD T1,RBJFN,(T1)
SKIPE T1
CLOSF
JFCL
MOVE T1,RQLREC ;RELEASE ANY SPACE ASSIGNED FOR
CALL RELFRE ; A RECORD BLOCK
FATAL.ERROR ; Die on release failure
RET ]
MOVE T1,RQLTGT ;GET ADDRESS OF TARGET NODE NIB
CALL GETNIB
JFCL ;IGNORE FAILURE
SETZRO NDLIP,(T1) ;SET LOAD NO LONGER IN PROGRESS
ACUNLOCK (T1) ;UNLCOK TARGET NODE NIB
HALTF ;DONE, OPERATION COMPLETE
;RQLERR - HERE ON ERROR DURING A DOWN-LINE LOAD
;
;ACCEPTS IN T1/ NICE RETURN CODE
; CALL RQLERR
;RETURNS: +1 ALWAYS, HAVING CLEANED UP FROM THE DOWN-LINE LOAD
RQLERR: PUSH P,T1 ;Save the error code
CALL SYRLOD ;MAKE A SYSERR ENTRY FOR THIS LOAD
SKIPE T1,RQLLNK ;ANY LOGICAL LINK TO A SERVER NCU ?
CLOSF ;YES, DISCONNECT THE LINK
JFCL ;IGNORE ERRORS IN CLEANUP ROUTINE
SKIPE T1,RQLREC ;ANY RECORD BLOCK ASSIGNED ?
CALL [ LOAD T1,RBJFN,(T1) ; Yes, any input file
SKIPE T1 ; JFN assigned ?
CLOSF ; Yes, close the input file, release JFN
JFCL ; Ignore errors here
MOVE T1,RQLREC ; Get address of record block again
CALL RELFRE ; Release it
FATAL.ERROR ; Die on release failure
RET ] ; Back to mainline code
MOVE T1,RQLTGT ;GET POINTER TO ASCIZ TARGET NODE NAME
CALL GETNIB ;GET ADDRESS OF TARGET NODE NIB
JRST RQLE.1 ; Go restore the error code and return
SETZRO NDLIP,(T1) ;SET LOAD NO LONGER IN PROGRESS
ACUNLOCK (T1) ;UNLOCK THE TARGET NODE NIB
RQLE.1: POP P,T1 ; Get the error code back
RET ; Give non-skip return always. (error)
;TRGGER - ROUTINE TO TRIGGER THE BOOTSTRAP ROM AT A REMOTE NODE
;
;ACCEPTS IN T1/ LOGICAL LINK TO NICE PROCESS IN SERVER NODE
; T2/ OPTIONS AS FOR DOWN-LINE LOAD REQUEST MESSAGE
; CALL TRGGER
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS. IF THE OPTIONS REQUESTED RETURN OF PROGRAM DATA,
; THEN THE FOLLOWING WILL BE SET UP:
;
; RQLLDV/ BOOT LINE DEVICE TYPE AT TARGET NODE
; RQLCPU/ CPU TYPE OF TARGET SYSTEM (.CPXXX)
; RQLPGM/ PROGRAM TYPE BEING REQUESTED (.PTXXX)
; RQLSID/ SOFTWARE ID
TRGGER: ASUBR <TBTLNK,TBTOPT,TBTFLG>
; DETERMINE IF PROGRAM DATA IS TO BE RETURNED
MOVE T4,TBTOPT ;GET OPTION BITS
LOAD T3,LO%ROM ;GET ROM FIELD
CAIE T3,.LOTBP ;TRIGGER ROM AND RETURN PROGRAM DATA ?
SETOM TBTFLG ;YES, NOTE PROGRAM DATA IS TO BE RETURNED
; ASSEMBLE A NICE LINE SERVICE MESSAGE TO TRIGGER THE BOOTSTRAP
CALL CLRMSG ;GO CLEAR THE MESSAGE AREA
HRLI T1,(POINT 8,) ;FORM POINTER TO THE START OF THE
HRRI T1,MSGBLK ; NICE MESSAGE BEING BUILT
MOVX T4,.NCLSV ;GET "LINE SERVICE" NICE FUNCTION CODE
IDPB T4,T1 ;PUT FUNCTION CODE INTO NICE MESSAGE
MOVX T4,.LSTBT ;ASSUME TRIGGER BOOT, NO PROGRAM DATA WANTED
SKIPE TBTFLG ;PROGRAM DATA REQUESTED ?
MOVX T4,.LSTBP ;YES, TRIGGER BOOT & RETURN PROGRAM DATA OPTION
IDPB T4,T1 ;STORE OPTION FIELD IN MESSAGE
DMOVE T3,RQLLIN ;GET SERVER LINE ID
CALL MAKLIN ;GO ADD STANDARD LINE ID TO MESSAGE
DMOVE T3,RQLPSW ;GET BOOT PASSWORD
MOVEI T2,MBPWSZ ;GET MAX # OF BYTES IN BOOT PASSWORDS
CALL MAKIMB ;GO MAKE AN IMAGE BINARY FIELD
; SEND THE MESSAGE TO THE NICE PROCESS AT THE SERVER NODE
MOVNI T3,<MBPWSZ+1>+<7> ;MESSAGE SIZE: <PASSWORD>+<FUNCTION+OPTION+LINE>
MOVE T2,[POINT 8,MSGBLK] ;GET POINTER TO START OF MESSAGE
MOVE T1,TBTLNK ;GET LOGICAL LINK NUMBER (JFN)
SOUTR ;SEND THE MESSAGE
ERJMP [RETBAD (.NRCME)] ;RETURN "COMMUNICATIONS FAILURE" ON ERROR
; ..
; ..
; WAIT FOR A RESPONSE MESSAGE
MOVE T1,TBTLNK ;GET LOGICAL LINK (JFN) TO SERVER NCU
BIN ;INPUT THE ONE-BYTE RETURN CODE (.NRXXX)
ERJMP [RETBAD (.NRCME)] ;RETURN "COMMUNICATIONS ERROR" ON FAILURE
MOVE T1,T2 ;COPY RETURN CODE
TXNE T1,NEGBIT ;RETURN CODE INDICATES SUCCESS ?
RETBAD () ;NO, PASS RETURN CODE BACK TO CALLER
; IF PROGRAM DATA WAS REQUESTED, INPUT THE PROGRAM DATA
SKIPN TBTFLG ;PROGRAM DATA WANTED ?
RETSKP ;NO, DONE. RETURN SUCCESS
CALL CLRMSG ;YES, CLEAR THE MESSAGE AREA TO RECEIVE THE DATA
MOVE T1,TBTLNK ;GET JFN (LOGICAL LINK)
SIBE ;DETERMINE THE NUMBER OF BYTES LEFT TO READ
ERJMP TBT020 ;T2 NOW HAS # OF BYTES LEFT TO BE INPUT
RETBAD (.NRNPE) ;FAILED, PROGRAM DATA WAS NOT RETURNED
TBT020: MOVE T4,T2 ;COPY NUMBER OF BYTES LEFT TO READ
MOVN T3,T2 ;GET -# OF BYTES TO READ
MOVE T2,[POINT 8,MSGBLK] ;GET POINTER TO WHERE DATA SHOULD GO
MOVE T1,TBTLNK ;GET LOGICAL LINK (JFN)
SINR ;INPUT THE PROGRAM DATA FROM THE NETWORK
ERJMP [RETBAD (.NRCME)] ;FAILED, RETURN "COMMUNICATIONS ERROR"
; EXTRACT THE PROGRAM DATA FROM THE RESPONSE JUST RECEIVED
ADD T4,T3 ;COMPUTE # OF CHARACTERS READ
MOVE T2,T4 ;COPY NUMBER OF BYTES READ
MOVE T1,[POINT 8,MSGBLK] ;GET POINTER TO PROGRAM REQUEST DATA
CALL GETPDT ;GO GET PROGRAM DATA
RETBAD () ;FAILED, RETURN ERROR TO CALLER
RETSKP ;DONE, RETURN SUCCESS
;INTSET - ROUTINE TO SET UP THE NCU INTERRUPT SYSTEM FOR DOWN LINE LOADS
;
;ACCEPTS IN T1/ LOGICAL LINK TO SERVER NCU
; CALL INTSET
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, INTERRUPT SYSTEM SET UP AND ENABLED
INTSET: ASUBR <INTLNK>
MOVEI T1,RETPC1 ;GET ADDRESS FOR RETURN PC FOR LEVEL 1
MOVEM T1,NCULEV ;STORE ADDRESS FOR MONITOR
MOVE T1,[1,,RQLINT] ;GET LEVEL,,INTERRUPT ROUTINE ADDRESS
MOVEM T1,RQLCHN+NCUCHN ;STORE DISPATCH ADDRESS FOR INTERRUPT
CIS ;CLEAR INTERRUPT SYSTEM
MOVX T1,.FHSLF ;GET OUR PROCESS HANDLE
HRLI T2,NCULEV ;GET ADDRESS OF LEVEL TABLE
HRRI T2,NCUCHN ;GET ADDRESS OF CHANNEL TABLE
SIR ;SET INTERRUPT TABLE ADDRESSES
MOVX T2,1B<RQLCHN> ;GET DOWN-LINE LOAD CHANNEL NUMBER
AIC ;ACTIVATE DOWN LINE LOAD CHANNEL
MOVE T1,INTLNK ;GET LOGICAL LINE TO SERVER NCU
MOVX T2,.MOACN ;GET "ASSIGN INTERRUPT CHANNEL" FUNCTION CODE
SETZM T3 ;INITIALIZE WORD WITH FIELDS TO CHANGE
MOVX T4,.MONCI ;GET "NO CHANGE" VALUE
STOR T4,MO%CDN,T3 ;DO NOT ENABLE FOR CONNECT INTERRUPTS
MOVX T4,RQLCHN ;GET CHANNEL TO USE FOR DOWN LINE LOADS
STOR T4,MO%INA,T3 ;INTERRUPT ON BOT INTERRUPT MESSAGES
STOR T4,MO%DAV,T3 ; AND ON DATA AVAILABLE
MTOPR ;ENABLE INTERRUPT CHANNEL
ERJMP [RETBAD (.NRNPE)] ;FAILED, RETURN "NICE PROGRAM PROCESS ERROR"
MOVX T1,.FHSLF ;GET OUR FORK HANDLE
EIR ;ENABLE INTERRUPT SYSTEM
RETSKP ;DONE, RETURN TO CALLER
SUBTTL NICE Process -- Up Line Dump
;REQDMP - ROUTINE TO PROCESS A REQUEST TO PERFORM AN UPLINE DUMP
;
;ACCEPTS IN T1/ POINTER TO START OF NICE REQUEST UP LINE DUMP MESSAGE
; T2/ NUMBER OF BYTES IN THE NICE MESSAGE
; CALL REQDMP
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, NODE DUMPED
REQDMP: ASUBR <RQDPTR,RQDCNT,RQDLNK,RQDREC>
; EXTRACT THE FIELD FROM THE NICE DUMP REQUEST MSG AND DEFAULT OTHER INFO
CALL GETRQD ;GO GET THE FIELDS INCLUDED IN THE REQUEST MSG
RETBAD (.NRIMF) ;FAILED, INVALID MESSAGE FORMAT
CALL DEFRQD ;GO DEFAULT REMAINING INFO NEEDED FOR DUMP
RETBAD (.NRICF) ;FAILED, INVALID CONFIGURATION FILE
; LOCK THE TARGET NODE
MOVE T1,RQDTGT ;GET POINTER TO ASCIZ TARGET NODE NAME
CALL GETNIB ;GET NIB ADDRESS FOR NODE BEING LOADED
RETBAD (.NRICF) ;FAILED, RETURN ERROR
MOVX T2,RM%PRI ;USE PRIMARY RESOURCE
MOVEM T1,RQDLNK ;SAVE NIB ADDRESS
CALL LOKNOD ;LOCK THE TARGET NODE
MOVE T1,RQDLNK ;GET THE NIB ADDRESS
SETONE NDDIP,(T1) ;SHOW DUMP IN PROGRESS
SETZM RQDLNK ;ZERO HOLDING CELL
; SEND A NICE LINE SERVICE MSG TO SERVER NODE NCU TO INTIATE DUMP DIALOG
MOVE T1,RQDSRV ;GET POINTER TO ASCIZ SERVER NODE NAME
CALL GETLNK ;GO GET A LOGICAL LINK TO THE SERVER NODE NCU
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVEM T1,RQDLNK ;SAVE LOGICAL LINK (JFN) TO SERVER NODE NCU
; Set the fork scheduling priority higher so that dump goes fast
MOVEI T1,.FHSLF ; Point to this process
MOVEI T2,0102 ; Only run in Q1
SPRIW
; INITIATE A DUMP DIALOG
CALL MAKDMP ;GO ASSEMBLE A NICE LINE SERVICE MSG
RETBAD () ;FAILED, RETURN ERROR
MOVN T3,T2 ;GET -COUNT
MOVE T2,T1 ;COPY POINTER TO START OF MESSAGE
MOVE T1,RQDLNK ;GET LOGICAL LINK TO SERVER NCU
SOUTR ;OUTPUT LINE SERVICE MSG TO INITIATE DUMP DIALOG
ERJMP [RETBAD (.NRCME)] ;FAILED, RETURN "COMMUNICATIONS ERROR"
; WAIT FOR A REPLY FROM THE SERVER NODE NCU
MOVE T1,RQDLNK ;GET LOGICAL LINK (JFN) TO SERVER NODE NCU
BIN ;WAIT FOR THE ONE-BYTE RETURN CODE
ERJMP [RETBAD (.NRCME)] ;FAILED, RETURN "COMMUNICATIONS ERROR"
MOVE T1,T2 ;COPY RETURN CODE
TXNE T1,NEGBIT ;SUCCESSFUL DIALOG INITIATION ?
RETBAD () ;NO, RETURN ERROR CODE TO CALLER IN T1
CAIE T1,.NRSUC ;RECEIVED EXPECTED SUCCESS CODE ?
RETBAD (.NRPRO) ;NO, RETURN "PROTOCOL ERROR"
; ASSIGN A RECORD BLOCK AND OPEN THE OUTPUT FILE
MOVX T1,OF%WR ;NOTE THAT OUTPUT IS TO BE DONE
CALL ASGREC ;GO ASSIGN A RECORD BLOCK FOR THIS I/O
RETBAD () ;FAILED, RETURN ERROR
MOVEM T1,RQDREC ;SAVE ADDRESS OF RECORD BLOCK
MOVE T1,RQDFIL ;GET POINTER TO OUTPUT FILESPEC
CALL OPNOFL ;GO OPEN THE OUTPUT FILE
RETBAD () ;FAILED, RETURN ERROR
MOVE T4,RQDREC ;GET ADDRESS OF RECORD BLOCK
STOR T1,RBJFN,(T4) ;STORE JFN OF DUMP FILE
; ..
; ..
; INPUT A DIALOG MESSAGE FROM THE SERVER NCU AND DISPATCH
RQD010: MOVE T1,RQDLNK ;GET LOGICAL LING (JFN) TO SERVER NCU
HRLI T2,(POINT 8,) ;FORM A BYTE POINTER TO THE
HRRI T2,MSGBLK ; NICE MESSAGE AREA
MOVNI T3,MAXNIC ;GET -MAX COUNT
SINR ;INPUT FROM SERVER NCU
ERJMP [RETBAD (.NRCME)] ;FAILED, RETURN "COMMUNICATIONS ERROR"
MOVEI T2,MAXNIC(T3) ;GET NUMBER OF BYTES RECEIVED
MOVE T1,[POINT 8,MSGBLK] ;GET POINTER TO START OF MESSAGE
ILDB T4,T1 ;GET DIALOG MESSAGE TYPE CODE
CAIL T4,0 ;RANGE CHECK THE DIALOG
CAILE T4,DMPMAX ; MESSAGE TYPE CODE
JRST [ TXNN T1,NEGBIT ;NEGATIVE IMPLIES A NICE PROTOCOL RETURN CODE
RETBAD (.NRPRO) ;INVALID TYPE CODE; RETURN "PROTOCOL ERROR"
RETBAD () ] ;RETURN NICE PROTOCOL RETURN CODE PROVIDED
MOVE T3,RQDREC ;GET ADDRESS OF RECORD BLOCK
CALL @DMPTAB(T4) ;DISPATCH TO PROCESSING ROUTINE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
SKIPL T1 ;STILL IN DUMP DIALOG ?
JRST RQD010 ;YES, GO GET NEXT MESSAGE FROM SERVER NCU
; DONE - CLEAN UP AND UNLOCK THE TARGET NODE NIB
MOVX T1,.NRSUC ;GET GENERAL SUCCESS RETURN CODE
CALL SYRDMP ;GO MAKE A SYSERR ENTRY FOR THIS DUMP
MOVE T1,RQDTGT ;GET POINTER TO ASCIZ TARGET NODE NAME
CALL GETNIB ;GO GET THE ADDRESS OF THE TARGET NODE NIB
JRST RQL085 ;FAILED, JUST PROCEED.
SETZRO NDDIP,(T1) ;SET DUMP DONE
MOVX T2,RM%PRI ;USE PRIMARY RESOURCE
CALL ULKNOD ;UNLOCK THE TARGET NODE
MOVE T1,RQDREC ;GET ADDRESS OF RECORD BLOCK AGAIN
CALL RELFRE ;RELEASE THE RECORD BLOCK
FATAL.ERROR ; Die on release failure
MOVE T1,RQDLNK ;GET LOGICAL LINK TO SERVER NCU
CLOSF ;DISCONNECT THE LINK
JFCL ;IGNORE ERRORS HERE
MOVE T1,REQLNK ;GET LOGICAL LINK (JFN) FROM REQUESTING TASK
MOVE T2,[POINT 8,[BYTE (8) .NRSUC]] ;GET SUCCESS RETURN CODE
MOVEI T3,1 ;ONE BYTE RESPONSE MESSAGE
SOUTR ;SEND REPLY MESSAGE TO ORIGINATOR OF DUMP REQ
ERJMP RSKP ;IGNORE FAILURE
RETSKP ;DONE, RETURN SUCCESS
; TABLE OF DUMP DIALOG MESSAGE TYPES
DMPTAB: DMPEND ; 0 END OF DIALOG
DMPSET ; 1 SET BASE ADDRESS
DMPMEM ; 2 MEMORY IMAGE DATA
[RETBAD (.NRPRO)] ; 3 SYSTEM PARAMETERS AND TRANSFER [ERROR!]
DMPMAX==.-DMPTAB
;DMPEND - ROUTINE TO PROCESS AN END-OF-DIALOG MESSAGE
;
;ACCEPTS IN T3/ ADDRESS OF RECORD BLOCK
; CALL DMPEND
;RETURNS: +1 FAILED
; +2 SUCCESS, WITH T1/ -1 INDICATING DIALOG IS COMPLETE
DMPEND: MOVE T1,T3 ;COPY ADDRESS OF RECORD BLOCK
MOVE T4,RQDREC ;GET ADDRESS OF RECORD BLOCK FOR THIS OPERATION
CALL CLSOFL ;GO CLOSE THE OUTPUT FILE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
SETOM T1 ;NOTE THAT DIALOG IS COMPLETED
RETSKP ;DONE, RETURN SUCCESS
;DMPMEM - ROUTINE TO PROCESS A MEMORY IMAGE DUMP MESSAGE
;
;ACCEPTS IN T1/ POINTER TO DIALOG DATA (MEMORY IMAGE DATA)
; T2/ NUMBER OF BYTES REMAINING IN MEMORY IMAGE DATA
; T3/ ADDRESS OF RECORD TABLE
; CALL DMPMEM
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, DATA DUMPED TO FILE
DMPMEM: SOSGE T2 ;DECREMENT COUNT FOR CPU TYPE CODE
RETBAD (.NRIMF) ;FAILED, RETURN ERROR
IBP T1 ;SKIP OVER CPU TYPE CODE
CALL WRTDMP ;WRITE THE DATA TO THE FILE
RETBAD (.NRIOE) ;FAILED, RETURN FILE I/O ERROR
SETZM T1 ;NOTE THAT WE ARE STILL IN THE DIALOG
RETSKP ;DONE, RETURN
;DMPSET - ROUTINE TO PROCESS "SET BASE ADDRESS" MESSAGES DURING A DUMP
;
;ACCEPTS IN T1/ POINTER TO DIALOG DATA IN MESSAGE
; T2/ NUMBER OF BYTES REMAINING IN MESSAGE
; T3/ ADDRESS OF RECORD BLOCK
; CALL DMPSET
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS
DMPSET: SETZM T1 ;NOTE THAT WE ARE STILL IN THE DIALOG
RETSKP ;SET BASE MESSAGES NOT PROCESSED FOR IMAGE FILES
SUBTTL NICE Process -- Read Information
REQRED: ASUBR <RQRPTR,RQRCNT>
; DISPATCH ON OPTION REQUESTED
CALL GETFCN ;GET NICE PROTOCOL FUNCTION CODE
RETBAD (.NRIMF) ;FAILED, INVALID MESSAGE FORMAT
CALL GETOPT ;GET NICE PROTOCOL OPTION CODE
RETBAD (.NRIMF) ;FAILED, INVALID MESSAGE FORMAT
CAIL T4,RQRSIZ ;WITHIN RANGE ?
RETBAD (.NRFNC) ;NO, INVALID OPTION
CALLRET @RQRTAB(T4) ;DISPATCH BASED ON ITEM REQUESTED
; DISPATCH TABLE FOR READ INFORMATION FUNCTION
RQRTAB: RETBAD (.NRFNC) ;LOCAL NODE COUNTERS
RQRLNS ;LOCAL NODE STATUS
RETBAD (.NRFNC) ;REMOTE NODE COUNTERS
RETBAD (.NRFNC) ;REMOTE NODE STATUS
RQRLCT ;LINE COUNTERS
RQRLST ;LINE STATUS
RETBAD (.NRFNC) ;ROUTING PATHS
RQRSIZ==.-RQRTAB
SUBTTL NICE Process -- Read Information -- Local Node Status
RQRLNS: STKVAR <<LNSMSG,50>,LNSCNT,<COMBLK,3>,<COMVER,3>,<ROUVER,3>>
MOVE T1,REQLNK ;GET LOGICAL LINK (JFN) TO REQUESTING TASK
MOVE T2,[POINT 8,[BYTE(8).NRSUC,1,0]]
MOVNI T3,3 ;NUMBER OF BYTES IN MESSAGE
SOUTR ;SEND RESPONSE
ERJMP RSKP ;IF FAILED NOTHING ELSE TO DO
HRRI T1,LNSMSG ;GET ADDRESS OF NICE MESSAGE TO BE SENT BACK
HRLI T1,(POINT 8,) ;FORM POINTER TO MESSAGE
MOVX T4,.RDLNS ;GET TYPE CODE FOR LOCAL NODE STATUS
IDPB T4,T1 ;ADD BYTE TO MESSAGE
MOVEI T2,1 ;ONE BYTES IN MESSAGE YET
MOVE T3,[POINT 7,OURNAM] ;GET POINTER TO OUR NODE NAME
CALL MAKNOD ;ASSEMBLE OUR NODE NAME IN MESSAGE
RET ;FAILED
ADDI T2,^D11 ;INCREMENT COUNT OF BYTES IN MESSAGE
MOVEM T2,LNSCNT ; INCLUDING STATE AND VERSION BYTES
MOVE T3,OURNUM ;GET OUR NODE NUMBER
IDPB T3,T1 ;ADD NODE NUMBER TO MESSAGE
MOVX T3,.NSON ;GET "ON" STATE
IDPB T3,T1 ;ADD STATE TO MESSAGE
MOVX T3,0 ;GET UNUSED BYTE OF FILLER (LOGGING STATES)
IDPB T3,T1 ;ADD LOGGING STATES TO
IDPB T3,T1 ; THE MESSAGE
IDPB T3,T1 ;NO DEFAULT HOST NODE
; ADD VERSIONS TO MESSAGE
MOVE T4,T1 ;SAVE THE BYTE POINTER
MOVEI T1,.NDGVR ;GET VERSION NUMBERS FROM MONITOR
MOVEI T2,COMBLK ;POINT TO JSYS BLOCK
MOVEI T3,COMVER ;WHERE VERSION NUMBER IS TO GO
MOVEM T3,.NDCVR(T2) ;STUFF IN REQUEST BLOCK
MOVEI T3,ROUVER ;WHERE VERSION NUMBER IS TO GO
MOVEM T3,.NDRVR(T2) ;STUFF IN REQUEST BLOCK
NODE ;GET THE INFORMATION
ERJMP [RET] ;ERROR - RETURN FAILURE
; HAVE VERSION NUMBERS - NOW PUT IN MESSAGE
MOVE T1,T4 ;RESTORE MESSAGE POINTER
MOVEI T3,ROUVER ;NOW GET ROUTING INFO INTO MSG
MOVE T4,.NDVER(T3) ;GET VERSION NUMBER
IDPB T4,T1 ; INTO MSG
MOVE T4,.NDECO(T3) ;ROUTING NUMBER (.NRILN) ;UNKNOWN PORT - ERROR
AOS W1 ;POINT TO NEXT ITEM
MOVE T3,(W1) ;GET THE PORT BLOCK NUMBER
CAME T1,.NDLNM(T3) ;OUR PORT?
JRST PRTLOP ;NO - KEEP LOOKING
MOVEI T2,PRTBUF ;WE WANT TO GET A DEVICE STRING
MOVEM T1,.BTPRT(T2) ;PUT PORT NUMBER IN DATA BLOCK
HRROI T1,.BTLID+1(T2) ;WHERE WE WANT MESSAGE BUILT
MOVEM T1,.BTLID(T2) ;INTO ARGUMENT BLOCK
MOVEI T1,.BTCPN ;TELL BOOT WE WANT CONVERSION
BOOT
ERJMP [RETBAD (.NRNPE)]
HRRI T1,.BTLID+1(T2) ;GET POINTER TO DEVICE STRING
HRLI T1,(POINT 7,)
CALL ASCPRS ;CONVERT TO INTERNAL LINE-ID FORMAT
RETBAD
MOVE W1,(W1) ;POINT TO PORT BLOCK
MOVE T2,.NDLST(W1) ;GET STATUS AND CONVERT TO "NICE" CODE
SETO T1, ;Initialize to absurdly large value
CAIN T2,.NDLON ;Check for LINE ON
MOVEI T1,.LSTON ; Set NICE LINE ON code
CAIN T2,.NDLOF ;Check for LINE OFF
MOVEI T1,.LSTOF ; Set NICE LINE OFF
CAIN T2,.NDLCN ;Check for CONTROLLER LOOPBACK
MOVEI T1,.LSTCN ; Set NICE CONTROLLER LOOPBACK
CAIN T2,.NDLCB ;Check for CABLE LOOPBACK
MOVEI T1,.LSTCB ; Set NICE CABLE LOOPBACK
MOVE T2,.NDLND(W1) ;GET ASCIZ NODE NAME
RETSKP ;SUCCESS RETURN
ENDSV.
ENDAV.
;LSTBLD - BUILD A LINES STATUS "NICE" RESPONSE
;ACCEPTS: T1/ STATUS
; T2/ POINTER TO NODE NAME
; T3-4/ LINE-ID
; Q1/ ADDRESS OF WHERE TO BUILD MESSAGE
;RETURNS: +1,ERROR, WITH "NICE" ERROR CODE IN T1
; +2,OTHERWISE
; T1/UPDATED BYTE POINTER (FROM Q1)
; T2/COUNT OF BYTES IN MESSAGE
LSTBLD: SAVEQ
STKVAR <<LSTLID,2>,<LSTHLD,2>>
SETZM Q2 ;ZERO BYTE COUNT WORD
DMOVEM T1,LSTHLD ;SAVE THE PTR AND STATUS
MOVEI T1,.RDLST ;FUNCTION CODE FOR MESSAGE
IDPB T1,Q1 ;PLACE INTO MESSAGE
AOS Q2 ;BUMP BYTE COUNTER
; HERE TO ADD INTERNAL LINE-ID TO "NICE" MESSAGE
DMOVE T1,Q1 ;WHERE TO PUT THE "NICE" MESSAGE & COUNT
CALL MAKLIN ;PUT LINE ID INTO "NICE" MESSAGE
DMOVE Q1,T1 ;RESTORE MESSAGE POINTER AND COUNT
DMOVE T3,LSTHLD ;GET STATUS AND NAME BYTE POINTER
IDPB T3,Q1 ;PUT STATUS INTO BYTE
AOS Q2 ;BUMP BYTE COUNT
SETZ T3, ;PROTOCOL REQUIRES TWO ZERO BYTES HERE
IDPB T3,Q1 ;PUT IT INTO BYTE
AOS Q2 ;BUMP BYTE COUNT
IDPB T3,Q1 ;PUT IT INTO BYTE
AOS Q2 ;BUMP BYTE COUNT
MOVE T1,Q1 ;NOW PUT NAME INTO MESSAGE
MOVE T2,T4 ;SEE IF THIS LINE HAS A NAME
ILDB T3,T2 ;GET FIRST CHARACTER
JUMPE T3,[ IDPB T3,T1 ;ZERO=NULL=NO NAME - PUT 0 COUNT IN MSG
MOVEI T2,T1 ;SHOW COUNT ADDED
JRST LSTOUT] ;JOIN COMMON EXIT
IBP T1 ;POINT PAST IMAGE COUNT FOR NAME
MOVE T2,T4 ;POINT TO WHERE NODE NAME LIVES
MOVEI T3,6 ;MAXIMUM LENGTH OF MESSAGE
SETZ T4, ;IT'S AN ASCIZ STRING
SOUT ;MOVE THE STRING
ERJMP [RETBAD (.NRNPE)] ;ERROR - FAIL
LDB T2,T2 ;Get last character transfered
CAIN T2,0 ;Check for a zero byte
AOS T3 ;We don't want to count null
MOVEI T2,6 ;Compute bytes put into message
SUB T2,T3
IDPB T2,Q1 ;Place in message
AOS T2 ;Account for length field
LSTOUT: ADD T2,Q2 ;FINAL COUNT OF BYTES IN MESSAGE
RETSKP
;ASCPRS - ROUTINE TO PARSE AN ASCIZ LINE ID
;
;ACCEPTS IN T1/ POINTER TO ASCIZ NAME
; CALL ASCPRS
;RETURNS: +1,ERROR, WITH "NICE" ERROR CODE IN T1
; +2 SUCCESS, WITH T3-T4/ LINE ID
;**N.B. ASCIZ STRING GETS DESTROYED
ASCPRS: STKVAR <PRSLDV,PRSCTL,PRSUNT,PRSSTN>
SETZM PRSCTL ;CONTROLLERE NUMBER WILL GO HERE
SETZM PRSUNT ;;UNIT NUMBER HERE
SETZM PRSLDV ;DEVICE NUMBER HERE
SETZM PRSSTN ;STATION NUMBER HERE
; PARSE DEVICE TYPE
MOVE T4,T1 ;SAVE THE STRING POINTER
MOVNI T3,^D15 ;SAFETY CHECK - AT MOST 15 CHARS
HRLZ T3,T3 ;MAKE AOBJN POINTER
FNDUDR: ILDB T2,T1 ;GET THE CHARACTER
CAIN T2,"_" ;IS IT AN UNDERSCORE
JRST PRSFND ;YES - HANDLE
AOBJN T3,FNDUDR ;KEEP LOOKING
RETBAD (.NRNPE) ;NOT FOUND - ERROR
PRSFND: SETZ T2, ;ZERO BYTE FOR TBLUK
DPB T2,T1
MOVE T2,T4 ;SET UP STRING POINTER FOR TBLUK
MOVEM T1,T4 ;SAVE POINTER
MOVEI T1,LINNAM ;POINT TO TABLE OF NAMES
TBLUK ;FIND NAME
ERJMP [RETBAD (.NRNPE)] ;ERROR - RETURN
TXNN T2,TL%EXM+TL%ABR ;MATCH?
RETBAD (.NRNPE) ;NO
HRRZ T2,0(T1) ;YES - GET THE FUNCTION CODE
MOVEM T2,PRSLDV ;AND SAVE
MOVE T1,T4 ;GET STRING POINTING TO CONTROLLER NUMBER
CALL CVTNUM ;CONVERT CONTROLLER NUMBER
RETBAD ;ERROR
MOVEM T2,PRSCTL ;SAVE
CALL PRSEND ;ANY MORE?
JRST PRSBLD ;NO - BUILD MESSAGE
CALL CVTNUM ;CONVERT UNIT NUMBER
RETBAD ;ERROR
MOVEM T2,PRSUNT ;SAVE
CALL PRSEND ;ANY MORE?
JRST PRSBLD ;NO - BUILD MESSAGE
CALL CVTNUM ;CONVERT STATION NUMBER
RETBAD ;ERROR
MOVEM T2,PRSSTN ;SAVE
CALL PRSEND ;ANY MORE?
JRST PRSBLD ;NO - BUILD MESSAGE
RETBAD ;ERROR - RETURN
PRSBLD: HRL T3,PRSLDV ;GET DEVICE IDENTIFIER
HRR T3,PRSCTL ;CONTROLLER NUMBER
HRL T4,PRSUNT ;UNIT NUMBER
HRR T4,PRSSTN ;STATION NUMBER
RETSKP
;CVTNUM - MAKE AN ASCII CHARACTER INTO A NUMBER
;ACCEPTS: T1/POINTER TO THE STRING
;RETURNS: +1,ERROR - NOT NUMERIC
; +2,SUCCESS - T2/NUMBER
CVTNUM: ILDB T2,T1 ;GET THE CHARACTER
SUBI T2,60 ;STRIP THE ASCII BITS
CAIG T2,10 ;CHECK RANGE
SKIPGE T2
RET ;NOT A LEGAL NUMBER
RETSKP ;A NUMBER
;PRSEND - LOAD BYTE AND CHECK FOR IT BEING ZERO
;ACCEPTS: T1/BYTE POINTER
;RETURNS: +1,BYTE WAS ZERO - T1/UPDATED
; +2,BYTE NOT ZERO - T1/UPDATED
PRSEND: ILDB T2,T1 ;GET THE BYTE
SKIPN T2 ;SKIP IF ZERO
RET ;ZERO
RETSKP ;NOT ZERO
; DISPATCH ON OPTION REQUESTED
REQSET: CALL GETFCN ;GET NICE PROTOCOL FUNCTION CODE
RETBAD (.NRIMF) ;FAILED, INVALID MESSAGE FORMAT
CALL GETOPT ;GET NICE PROTOCOL OPTION CODE
RETBAD (.NRIMF) ;FAILED, INVALID MESSAGE FORMAT
CAIL T4,RSTLEN ;WITHIN RANGE ?
RETBAD (.NRFNC) ;NO, INVALID OPTION
CALLRET @RSTTAB(T4) ;DISPATCH BASED ON ITEM REQUESTED
; DISPATCH TABLE FOR SET PARAMETER FUNCTION
RSTTAB: [RETBAD (.NRFNC)] ;DEFAULT HOST
[RETBAD (.NRFNC)] ;RECEIVE ACCESS PASSWORD
[RETBAD (.NRFNC)] ;TRANSMIT ACCESS PASSWORD
[RETBAD (.NRFNC)] ;LOCAL LOOPBACK
[RETBAD (.NRFNC)] ;NODE STATE
[RETBAD (.NRFNC)] ;NODE OPERATOR LOGGING STATE
[RETBAD (.NRFNC)] ;NODE MAINTENANCE LOGGING STATE
[RETBAD (.NRFNC)] ;ILLEGAL ????
LINSTA ;LINE STATE
[RETBAD (.NRFNC)] ;LINE OPERATOR LOGGING STATE
[RETBAD (.NRFNC)] ;LINE MAINTENANCE LOGGING STATE
[RETBAD (.NRFNC)] ;DEFAULT RECEIVE ACCESS PASSWORD
[RETBAD (.NRFNC)] ;DEFAULT TRANSMIT ACCESS PASSWORD
RSTLEN==.-RSTTAB
SUBTTL NICE Process -- Set Parameter -- Line State
LINSTA: STKVAR <<LSTLIN,2>,LSTPRT>
CALL GETLIN ;GET LINE IDENTIFICATION
RETBAD () ;FAILED, INVALID LINE ID
DMOVEM T3,LSTLIN ;SAVE LINE ID
SOSGE T2 ;STILL ONE MORE BYTE LEFT ?
RETBAD (.NRIMF) ;NO, FAIL
ILDB T1,T1 ;GET ANOTHER BYTE
MOVX T2,LSTTAB ;GET ADDRESS OF DISPATCH TABLE
MOVX T3,LSTLEN ;GET LENGTH OF DISPATCH TABLE
CALL FNDDSP ;FIND ENTRY IN DISPATCH TABLE
RETBAD (.NRILS) ;FAILED, INVALID LINE STATE
JRST (T1) ;DISPATCH TO PROCESSING ROUTINE
LSTTAB: .LSTON,,LSTON
.LSTOF,,LSTOFF
.LSTMN,,LSTMNT
.LSTCN,,LSTCTL
.LSTCB,,LSTCBL
LSTLEN==.-LSTTAB
; ROUTINES TO SET A LINE STATE
LSTON: CALL CLRBOT ;CLEAR BOOT JSYS ARG BLOCK
DMOVE T1,LSTLIN ;GET LINE ID
CALL LIDPRT ;CONVERT LINE ID TO PORT NUMBER
RETBAD () ;FAILED
MOVEM T1,LSTPRT ;SAVE PORT NUMBER
SETOM T4 ;SET FLAG NOTING VALID DEVICE NOT YET FOUND
HLRZ T1,LSTLIN ;GET DEVICE TYPE FOR THIS LINE
CAIN T1,.DTDTE ;IS IT A DTE20 ?
MOVX T4,.VNMCB ;YES, USE NSP
CAIN T1,.DTKDP ;IS IT A KMC/DUP ?
MOVX T4,.VNDDC ;YES, USE DDCMP
JUMPL T4,R ;FAIL IF NO VALID DEVICE TYPE FOUND
MOVE T1,LSTPRT ;GET PORT NUMBER
MOVE T2,T4 ;GET PROTOCOL VERSION NUMBER
CALL SETLIN ;GO SET LINE STATE
RETBAD () ;FAILED
RETSKP ;DONE, RETURN SUCCESS
LSTOFF: CALL CLRBOT ;CLEAR BOOT JSYS ARG BLOCK
DMOVE T1,LSTLIN ;GET LINE ID
CALL LIDPRT ;CONVERT LINE ID TO PORT NUMBER
RETBAD () ;FAILED
MOVEI T2,BTARG ;GET ADDRESS OF BOOT JSYS ARG BLOCK
MOVEM T1,.BTDTE(T2) ;SAVE PORT NUMBER
MOVX T1,.BTTPR ;GET "TERMINATE PROTOCOL" FUNCTION
BOOT ;TURN THE LINE OFF
ERJMP [RETBAD (.NRNPE)] ;FAILED
MOVE T1,REQLNK ;GET LOGICAL LINK (JFN) TO REQUESTING TASK
MOVE T2,[POINT 8,[BYTE (8) .NRSUC]] ;GET POINTER TO SUCCESS CODE
MOVNI T3,1 ;RETURN CODE IS A SINGLE BYTE
SOUTR ;SEND BACK THE RETURN CODE
ERJMP RSKP ;IF FAILED, NOTHING ELSE TO DO
RETSKP ;DONE
LSTMNT: RETBAD (.NRFNC)
LSTCTL: CALL CLRBOT ;CLEAR BOOT JSYS ARG BLOCK
DMOVE T1,LSTLIN ;GET LINE ID
CALL LIDPRT ;CONVERT LINE ID TO PORT NUMBER
RETBAD () ;FAILED
MOVX T2,.VNCNL ;GET PROTOCOL VERSION FOR CONTROLLER LOOPBACK
CALLRET SETLIN ;GO SET LINE STATE
LSTCBL: CALL CLRBOT ;CLEAR BOOT JSYS ARG BLOCK
DMOVE T1,LSTLIN ;GET LINE ID
CALL LIDPRT ;CONVERT LINE ID TO PORT NUMBER
RETBAD () ;FAILED
MOVX T2,.VNCBL ;GET PROTOCOL VERSION FOR CABLE LOOPBACK
CALLRET SETLIN ;GO SET LINE STATE
; SETLIN - ROUTINE TO SET A LINE ON OR IN LOOPBACK
;
;ACCEPTS IN T1/ PORT NUMBER
; T2/ PROTOCOL VERSION NUMBER
; CALL SETLIN
;RETURNS: +1 FAILED
; +2 SUCCESS, LINE STATE SET
SETLIN: MOVEI T4,BTARG ;GET ADDRESS OF BOOT JSYS ARG BLOCK
MOVEM T1,.BTDTE(T4) ;SAVE PORT NUMBER
MOVEM T2,.BTPRV(T4) ;SAVE PROTOCOL VERSION NUMBER
MOVEI T2,BTARG ;GET ADDRESS OF BOOT JSYS ARG BLOCK AGAIN
MOVX T1,.BTIPR ;GET "INITIATE PROTOCOL" FUNCTION
BOOT ;TURN THE LINE ON
ERJMP [RETBAD (.NRNPE)] ;FAILED
MOVE T1,REQLNK ;GET LOGICAL LINK (JFN) TO REQUESTING TASK
MOVE T2,[POINT 8,[BYTE (8) .NRSUC]] ;GET POINTER TO SUCCESS CODE
MOVNI T3,1 ;RETURN CODE IS A SINGLE BYTE
SOUTR ;SEND BACK THE RETURN CODE
ERJMP RSKP ;IF FAILED, NOTHING ELSE TO DO
RETSKP ;DONE
SUBTTL NICE Process -- Zero Line Counters
REQZRO: CALL GETFCN ;GET FUNCTION CODE
RETBAD (.NRIMF) ;"INVALID MESSAGE FORMAT"
CALL GETEXB ;GET OPTION FIELD
RETBAD () ;FAILED
CAIE T4,.NCZLN ;ASKING FOR LINE COUNTS
RETBAD (.NRFNC) ;"INVALID FUNCTION"
CALL GETLIN ;GET LINE-ID FROM MESSAGE
RETBAD () ;FAILED
JUMPL T3,NRILN ;IN CASE WANTS ALL
STKVAR <<ZROLID,2>,<ZROBLK,40>>
DMOVEM T3,ZROLID ;SAVE LINE ID
DMOVE T1,T3 ;COPY LINE-ID TO RIGHT REGISTER
CALL LIDPRT ;CONVERT LINE-ID TO PORT
JRST NRILN ;LOSE
HRLI T1,(BT%ZRO) ;FLAG TO ZERO COUNTERS
MOVEM T1,.BTPRT+ZROBLK ;PUT PORT IN ARGUMENT BLOCK
MOVEI T1,20 ;MAXIMUM NUMBER OF COUNTERS
MOVEI T2,20+ZROBLK ;WHERE TO PUT FIRST COUNTERS
HRLI T2,444400 ;MAKE INTO POINTER
DMOVEM T1,.BTSCC+ZROBLK ;STATUS COUNTERS
DMOVEM T1,.BTRCC+ZROBLK ;RECEIVE COUNTERS
DMOVEM T1,.BTTCC+ZROBLK ;TRANSMIT COUNTERS
MOVEI T1,.BTRLC ;WANT LINE COUNTERS
MOVEI T2,ZROBLK ;ADDRESS OF ARGUMENT BLOCK
BOOT
ERJMP NRILN ;WHY ?
MOVE T1,REQLNK ;GET LOGICAL LINK (JFN) TO REQUESTING TASK
MOVE T2,[POINT 8,[BYTE(8).NRSUC]]
MOVNI T3,1 ;NUMBER OF BYTES IN MESSAGE
SOUTR ;SEND RESPONSE
ERJMP RSKP ;IF FAILED NOTHING ELSE TO DO
RETSKP ;WON
SUBTTL NICE Process -- Line Service Handler
;LINSRV - ROUTINE TO PROCESS REQUESTS FOR LINE SERVICE
;
;ACCEPTS IN T1/ POINTER TO NICE LINE SERVICE REQUEST MESSAGE
; T2/ NUMBER OF BYTES IN THE NICE MESSAGE
; CALL LINSRV
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, FUNCTION PERFORMED
REQLSV: ASUBR <LSVPTR,LSVCNT>
STKVAR <LSVOPT,LSVDTE,LSVLTB,LSVCOD>
SUBI T2,2 ;ACCOUNT FOR FUNCTION AND OPTION BITS
JUMPL T2,[RETBAD (.NRIMF)] ;MAKE SURE ENOUGH BYTES LEFT IN MESSAGE
IBP T1 ;SKIP OVER THE NICE FUNCTION CODE
ILDB T4,T1 ;GET OPTION BYTE FROM THE MESSAGE
MOVEM T4,LSVOPT ;SAVE OPTION BYTE
; GET THE LINE ID FROM THE MESSAGE AND SET UP LINE TABLE
CALL GETLIN ;GO GET THE LINE ID
RETBAD () ;FAILED, RETURN ERROR CODE TO CALLER
MOVEM T1,LSVPTR ;SAVE POINTER TO NEXT FIELD IN MESSAGE
MOVEM T2,LSVCNT ;SAVE # OF BYTES REMAINING IN THE MESSAGE
CALL CHKLIN ;GO CHECK LINE ID AND GET DTE20 NUMBER
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVEM T1,LSVDTE ;SAVE DTE20 NUMBER
IMULI T1,LTBSIZ ;COMPUTE STARTING ADDRESS OF LINE
MOVEI T1,LINTAB(T1) ; TABLE FOR THIS LINE
MOVEM T1,LSVLTB ;SAVE LINE TABLE ADDRESS
MOVE T2,LSVDTE ;GET DTE20 NUMBER
STOR T2,LNDTE,(T1) ;STORE DTE20 IN LINE TABLE
CALL ASGPAG ;GET A PAGE TO USE FOR DATA
RETBAD (.NRRES) ;RETURN "RESOURCE ERROR" RETURN CODE
MOVE T4,LSVLTB ;GET LINE TABLE ADDRESS
HRLI T2,(POINT 8,) ;FORM POINTER TO MESSAGE AREA
STOR T2,LNMSG,(T4) ;SAVE POINTER TO MESSAGE AREA IN LINE TABLE
ACLOCK (T4) ;LOCK THIS LINE TABLE (ADDRESS IN T4)
; ..
; ..
; LOOP OVER LINE SERVICE TABLE LOOKING FOR THE REQUESTED OPTION
MOVE T3,[-LSVSIZ,,LSVTAB] ;SET UP TOO LOOP THROUGH LINE SERVICE TABLE
MOVE T4,LSVOPT ;RESTORE OPTION REQUESTED
LSV010: HLRZ T1,(T3) ;GET OPTION FROM TABLE
CAMN T1,T4 ;FOUND DESIRED OPTION ?
JRST LSV020 ;YES, GO DISPATCH TO SERVICE ROUTINE
AOBJN T3,LSV010 ;LOOP OVER LINE SERVICE TABLE
MOVX T1,.NRFNC ;FAILED, GET "INVALID OPTION" NICE RETURN CODE
JRST LSVERR ;GO RELEASE FREE SPACE AND RETURN
; HERE TO DISPATCH TO SERVICE ROUTINE
LSV020: MOVEI T1,.FHSLF ; Before dispatch point to this process
MOVEI T2,0102 ; and put it into scheduler Q1
SPRIW
SETZM LSVCOD ;INITIALIZE ERROR FLAG
HRRZ T4,(T3) ;GET SERVICE ROUTINE ADDRESS
MOVE T3,LSVLTB ;GET ADDRESS OF LINE TABLE
MOVE T2,LSVCNT ;GET NUMBER OF BYTES LEFT IN MESSAGE
MOVE T1,LSVPTR ;GET POINTER TO NEXT FIELD IN MESSAGE
CALL (T4) ;GO HANDLE REQUESTED FUNCTION
LSVERR: MOVEM T1,LSVCOD ;SAVE ERROR CODE
MOVE T4,LSVLTB ;GET LINE TABLE ADDRESS
ACUNLOCK (T4) ;UNLOCK THE LINE TABLE
LOAD T1,LNMSG,(T4) ;GET ADDRESS OF MESSAGE AREA
HRRZ T1,T1 ;KEEP JUST THE ADDRESS
CALL RELPGA ;RELEASE FREE PAGE
RETBAD (.NRRES) ;RETURN "RESOURCE ERROR" RETURN CODE
SKIPN T1,LSVCOD ;ANY ERROR ?
RETSKP ;NO, SUCCESS, DONE.
RETBAD () ;YES, RETURN ERROR CODE
LSVTAB: .LSLOD,,LSLOD ;INITIATE A LOAD DIALOG
.LSDMP,,LSDMP ;INITIATE A DUMP DIALOG
.LSTBT,,LSTBT ;TRIGGER BOOTSTRAP, NO PROGRAM DATA
.LSTBP,,LSTBP ;TRIGGER BOOTSTRAP, RETURN PROGRAM DATA
LSVSIZ==.-LSVTAB ;SIZE OF LINE SERVICE DISPATCH TABLE
;LSLOD - LINE SERVICE ROUTINE TO INITIATE A DOWN-LINE LOAD DIALOG
;
;ACCEPTS IN T1/ POINTER TO PARAMETERS IN NICE LINE SERVICE MESSAGE
; T2/ NUMBER OF BYTES LEFT IN MESSAGE
; T3/ ADDRESS OF LINE TABLE FOR THIS OPERATION
; CALL LSLOD
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, DIALOG INITIATED
LSLOD: ASUBR <LSLPTR,LSLCNT,LSLLIN,LSLPGM>
; GET AND CHECK THE PROGRAM TYPE BEING LOADED
SOJN T2,[RETBAD (.NRIMF)] ;FAIL IF NOT EXACTLY ONE BYTE LEFT IN MESSAGE
ILDB T3,T1 ;GET THE PROGRAM TYPE FROM THE MESSAGE
MOVEM T3,LSLPGM ;SAVE PROGRAM TYPE
CAIL T3,.PTSLD ;A VALID PROGRAM TYPE
CAILE T3,.PTOPS ; BEING LOADED ?
RETBAD (.NRIPV) ;NO, RETURN "INVALID PARAMETER VALUE"
MOVE T4,LSLLIN ;GET ADDRESS OF LINE TABLE
STOR T3,LNPGM,(T4) ;SAVE TYPE OF PROGRAM BEING LOADED
SETZRO LNLDN,(T4) ;INITIALIZE FIRST LOAD NUMBER TO USE
MOVE T1,REQLNK ;YES, GET LOGICAL LINK TO REQUESTOR
MOVE T2,[POINT 8,[BYTE (8) .NRSUC]] ;GET POINTER TO SUCCESS RETURN CODE
MOVNI T3,1 ;RESPONSE MESSAGE IS ONE BYTE RETURN CODE
SOUTR ;OUTPUT THE RETURN CODE
ERJMP [RETBAD (.NRCME)] ;FAILED, RETURN "COMMUNICATIONS ERROR"
; ..
; ..
; DIALOG MESSAGE LOOP. THE BASIC SEQUENCE OF OPERATIONS IS TO RECEIVE
; A NICE LINE SERVICE DIALOG MESSAGE FROM THE REQUESTING TASK, AND THEN
; TO PERFORM THE SPECIFIED OPERATION. THIS IS REPEATED UNTIL THE DIALOG
; MESSAGE RECEIVED IS "END-OF-DIALOG", AT WHICH TIME THE LINE SERVICE
; OPERATION IS COMPLETE AND CONTROL RETURNS TO THE NICE DISPATCHER.
; WAIT FOR A DIALOG MESSAGE FROM THE REQUESTOR
LSLOD1: CALL CLRMSG ;GO CLEAR THE MESSAGE AREA
MOVE T1,REQLNK ;GET LOGICAL LINK (JFN)
MOVEI T2,MSGBLK ;GET ADDRESS OF MESSAGE BLOCK
HRLI T2,(POINT 8,) ;FORM POINTER TO WHERE MESSAGE IS TO GO
MOVNI T3,MSGSIZ*BPWRD ;GET MAX NUMBER OF BYTES
SINR ;WAIT FOR A DIALOG MESSAGE FROM REQUESTOR
ERJMP [RETBAD (.NRCME)] ;RETURN "COMMUNICATIONS ERROR" ON FAILURE
; DISPATCH BASED ON TYPE OF DIALOG MESSAGE RECEIVED
MOVEI T2,MSGSIZ*BPWRD(T3) ;GET NUMBER OF BYTES IN THE MESSAGE
MOVE T1,[POINT 8,MSGBLK] ;GET POINTER TO START OF MESSAGE
SOSGE T2 ;AT LEAST ONE BYTE IN THE DIALOG MESSAGE ?
RETBAD (.NRIMF) ;NO, RETURN "INVALID MESSAGE FORMAT" ERROR
ILDB T4,T1 ;GET TYPE CODE FROM MESSAGE
CAIL T4,.LMEND ;IS THIS A VALID DIALOG
CAILE T4,.LMXFR ; MESSAGE TYPE CODE ?
RETBAD (.NRFNC) ;NO, RETURN "INVALID FUNCTION" ERROR
MOVE T3,LSLLIN ;GET ADDRESS OF LINE TABLE
CALL @DLGTAB(T4) ;YES, DISPATCH TO PROCESSING ROUTINE
JRST [ CALL SNDEND ;FAILED, GO SEND END-OF-DIALOG MESSAGE
RETSKP ] ;DONE, RETURN
SKIPE T1 ;ARE WE STILL IN THE LOAD DIALOG ?
RETSKP ;NO, LOAD COMPLETE, RETURN SUCCESS
JRST LSLOD1 ;SUCCESS, WAIT FOR NEXT DIALOG MESSAGE
; TABLE OF DIALOG MESSAGE SERVICE ROUTINES
DLGTAB: RSKP ; 0 END OF DIALOG
DIABAS ; 1 SET BASE ADDRESS
DIAMEM ; 2 MEMORY IMAGE DATA
DIAXFR ; 3 PARAMETERS AND TRANSFER ADDRESS
;DIABAS - SET BASE ADDRESS DIALOG MESSAGE RECEIVED
;
;ACCEPTS IN T1/ POINTER TO DIALOG DATA (BASE ADDRESS)
; T2/ NUMBER OF BYTES REMAINING IN MESSAGE
; T3/ ADDRESS OF LINE TABLE
; CALL DIABAS
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, BASE ADDRESS FOR NEXT LOAD IMAGE SET
DIABAS: STKVAR <BASLIN>
MOVEM T3,BASLIN ;SAVE LINE TABLE ADDRESS
CALL GETMEM ;GO EXTRACT LOAD ADDRESS FROM MESSAGE
RETBAD () ;FAILED, RETURN ERROR CODE TO CALLER
MOVE T4,BASLIN ;GET ADDRESS OF LINE TABLE
STOR T3,LNADR,(T4) ;STORE BASE ADDRESS IN LINE TABLE
SETZM T1 ;NOTE THAT WE ARE STILL IN LOAD DIALOG
RETSKP ;DONE, RETURN SUCCESS
;DIAMEM - ROUTINE TO PROCESS A MEMORY IMAGE DIALOG MESSAGE
;
;ACCEPTS IN T1/ POINTER TO DIALOG DATA IN LINE SERVICE MESSAGE
; T2/ NUMBER OF BYTES LEFT IN MESSAGE
; T3/ ADDRESS OF LINE TABLE
; CALL DIAMEM
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, DATA LOADED OR ADDED TO LOAD IMAGE
DIAMEM: ASUBR <MEMPTR,MEMCNT,MEMLIN>
SOSGE MEMCNT ;AT LEAST ONE BYTE IN THE MESSAGE ?
RETBAD (.NRIMF) ;NO, RETURN "INVALID MESSAGE FORMAT"
ILDB T4,MEMPTR ;YES, GET CPU TYPE CODE (.CPXXX)
CAIE T4,.CP11 ;PDP-11 ?
RETBAD (.NRIPV) ;NO, RETURN "INVALID PARAMETER VALUE" ERROR
; DETERMINE IF A SECONDARY LOADER IS BEING LOADED - IF SO, ADD THE MEMORY
; DATA TO THE CORE IMAGE BEING BUILT IN MEMORY. ELSE, SEND THE MEMORY IMAGE
; ACROSS THE DTE-20 TO THE LOADER IN THE TARGET NODE.
MOVE T4,MEMLIN ;GET ADDRESS OF LINE TABLE
LOAD T1,LNPGM,(T4) ;GET PROGRAM TYPE BEING LOADED (.PTXXX)
CAIE T1,.PTSLD ;SECONDARY LOADER ?
JRST MEM010 ;NO, GO SEND DATA ACROSS DTE20 TO TARGET NODE
MOVE T1,MEMPTR ;YES, GET POINTER TO MEMORY IMAGE DATA
MOVE T2,MEMCNT ;GET NUMBER OF BYTES OF DATA
MOVE T3,MEMLIN ;GET ADDRESS OF LINE TABLE
CALL MOPLDR ;GO ADD DATA TO IMAGE BEING BUILT
RETBAD () ;FAILED, RETURN ERROR TO CALLER
SETZM T1 ;NOTE THAT WE ARE STILL IN LOAD DIALOG
RETSKP ;DONE, MEMORY IMAGE DATA HANDLED
; HERE TO SEND LOAD IMAGE DATA ACROSS THE DTE20 AND RECEIVE THE REPLY
; FIRST, BUILD THE MOP "LOAD IMAGE" MESSAGE
MEM010: MOVE T1,MEMPTR ;GET POINTER TO MEMORY IMAGE DATA IN NICE MSG
MOVE T2,MEMCNT ;GET NUMBER OF MEMORY IMAGE DATA BYTES
MOVE T3,MEMLIN ;GET ADDRESS OF LINE TABLE
CALL MAKMPL ;GO ASSEMBLE A MOP "LOAD-WITHOUT-TRANSFER" MSG
RETBAD (.NRNPE) ;FAILED, NICE PROCESS PROGRAM ERROR
; SEND THE MOP MESSAGE ACROSS THE DTE20 AND RECEIVE THE REPLY MOP MESSAGE
MOVE T1,MEMLIN ;GET ADDRESS OF LINE TABLE
CALL DTESND ;GO SEND THE DATA ACROSS THE DTE20
RETBAD (.NRCME) ;FAILED, RETURN "COMMUNICATIONS ERROR"
MOVE T1,MEMLIN ;GET ADDRESS OF LINE TABLE
CALL DTERCV ;RECEIVE THE REPLY MOP MESSAGE FROM THE LOADER
RETBAD (.NRCME) ;FAILED, RETURN "COMMUNICATIONS ERROR"
; CHECK THE MOP MESSAGE RECEIVED. SHOULD BE "REQUEST NEXT LOAD"
MOVE T3,MEMLIN ;GET ADDRESS OF LINE TABLE
CALL CHKMOP ;GO CHECK MOP MESSAGE AND UPDATE LOAD NUMBER
RETBAD () ;FAILED, RETURN ERROR TO CALLER
SETZM T1 ;NOTE THAT WE ARE STILL IN LOAD DIALOG
RETSKP ;DONE, RETURN SUCCESS.
;DIAXFR - ROUTINE TO PROCESS A "TRANSFER" DIALOG MESSAGE
;
;ACCEPTS IN T1/ POINTER TO DIALOG DATA (PARAMETERS AND TRANSFER ADDRESS)
; T2/ NUMBER OF BYTES LEFT IN DIALOG MESSAGE
; T3/ ADDRESS OF LINE TABLE
; CALL DIAXFR
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, PROGRAM IN TARGET NODE STARTED AND PARAMETERS SENT
DIAXFR: ASUBR <XFRPTR,XFRCNT,XFRLIN,XFRADR>
; EXTRACT THE SYSTEM PARAMETERS AND TRANSFER ADDRESS FROM THE MESSAGE
CALL GETPAR ;GET PARAMETERS FROM THE MESSAGE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
CALL GETMEM ;GO GET THE TRANSFER ADDRESS FROM THE MESSAGE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVEM T3,XFRADR ;SAVE TRANSFER ADDRESS
; IF LOADING A SECONDARY LOADER, SEND THE LOADER ACROSS THE DTE20
MOVE T4,XFRLIN ;GET ADDRESS OF LINE TABLE
LOAD T1,LNPGM,(T4) ;GET PROGRAM TYPE BEING LOADED (.PTXXX)
CAIE T1,.PTSLD ;LOADING A SECONDARY LOADER ?
JRST XFR010 ;NO, GO SEND A MOP "TRANSFER" MESSAGE
; LOAD THE SECONDARY BOOTSTRAP AND WAIT FOR A PROGRAM REQUEST
MOVE T1,XFRLIN ;GET ADDRESS OF LINE TABLE
CALL DTESLD ;GO LOAD THE SECONDARY BOOTSTRAP
RETBAD (.NRCME) ;RETURN "COMMUNICATIONS ERROR" ON FAILURE
MOVE T1,XFRLIN ;GET ADDRESS OF LINE TABLE
CALL DTERCV ;GO RECEIVE A MOP MESSAGE FROM THE TARGET NODE
RETBAD (.NRCME) ;RETURN "COMMUNICATIONS ERROR" ON FAILURE
; CHECK MOP MESSAGE AND RETURN PROGRAM REQUEST TO THE TASK THAT INITIATED
; THE LOAD DIALOG.
MOVE T3,XFRLIN ;GET ADDRESS OF LINE TABLE
CALL MAKEND ;GO CHECK MOP MESSAGE AND ASSEMBLE AN
; END-OF-DIALOG NICE LINE SERVICE MESSAGE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
JRST XFR030 ;SEND THE "END-OF-DIALOG" AND WAIT FOR ESPONSE
;...
;...
; HERE TO ASSEMBLE AND SEND A MOP "PARAMETERS AND TRANSFER" MESSAGE
XFR010: MOVE T1,XFRLIN ;GET ADDRESS OF LINE TABLE
MOVE T2,XFRADR ;GET TRANSFER ADDRESS
CALL MAKMLP ;GO MAKE A MOP LOAD-PARAMETERS AND TRANSFER MSG
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVE T4,XFRLIN ;GET ADDRESS OF LINE TABLE
STOR T1,LNMSG,(T4) ;STORE POINTER TO MOP MESSAGE
STOR T2,LNCNT,(T4) ;STORE SIZE OF MOP MESSAGE
MOVE T1,XFRLIN ;GET ADDRESS OF LINE TABLE
CALL DTESND ;GO SEND THE MESSAGE ACROSS THE DTE20
RETBAD (.NRCME) ;FAILED, RETURN "COMMUNICATIONS ERROR"
; RECEIVE THE REPLY MESSAGE FROM THE LOADER IN THE TARGET NODE
MOVE T1,XFRLIN ;GET ADDRESS OF LINE TABLE
CALL DTERCV ;GO RECEIVE A MOP MESSAGE FROM THE TARGET NODE
RETBAD (.NRCME) ;RETURN "COMMUNICATIONS ERROR" ON FAILURE
; VERIFY THE RESPONSE FROM THE TARGET NODE
MOVE T3,XFRLIN ;GET ADDRESS OF LINE TABLE
LOAD T4,LNPGM,(T3) ;GET TYPE OF PROGRAM BEING LOADED
CAIE T4,.PTOPS ;LOADING AN OPERATING SYSTEM ?
JRST [ CALL MOPVER ;NO, GO CHECK THAT REPLY IS A PROGRAM REQ MSG
RETBAD () ;FAILED, RETURN ERROR TO CALLER
JRST XFR030 ] ;GO SEND END-OF-DIALOG MESSAGE TO REQUESTOR
; HERE IF LOADING AN OPERATING SYSTEM - CHECK FINAL MOP LOAD REQUEST MESSAGE
CALL CHKMOP ;GO CHECK THE MOP "REQUEST LOAD" MESSAGE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVE T1,XFRLIN ;GET ADDRESS OF LINE TABLE
CALL INIPRO ;GO INITIATE PROTOCOL ON THIS LINE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
CALL CLRMSG ;GO CLEAR THE NICE MESSAGE AREA
MOVE T4,[POINT 8,MSGBLK] ;GET POINTER TO MOP MESSAGE
MOVX T1,.LMEND ;GET "END-OF-DIALOG" TYPE CODE
IDPB T1,T4 ;PUT TYPE CODE INTO REPLY MESSAGE
MOVX T1,.NRSUC ;GET GENERAL SUCCESS CODE
IDPB T1,T4 ;ADD RETURN CODE TO END-OF-DIALOG MESSAGE
MOVE T1,[POINT 8,MSGBLK] ;GET POINTER TO NICE MESSAGE
MOVX T2,2 ;MESSAGE CONTAINS ONLY TWO BYTES
; HERE TO SEND "END-OF-DIALOG" MESSAGE BACK TO REQUESTING TASK
XFR030: MOVN T3,T2 ;GET -COUNT
MOVE T2,T1 ;COPY POINTER TO MESSAGE
MOVE T1,REQLNK ;GET LINK TO REQUESTING TASK
SOUTR ;SEND MESSAGE TO REQUESTING TASK
ERJMP [RETBAD (.NRCME)] ;RETURN "COMMUNICATIONS ERROR" ON FAILURE
;...
;...
; PROGRAM LOAD COMPLETE - WAIT FOR END OF DIALOG MESSAGE FROM SERVER NCU
CALL CLRMSG ;CLEAR THE MESSAGE AREA
MOVE T1,REQLNK ;GET LOGICAL LINK (JFN)
MOVE T2,[POINT 8,MSGBLK] ;GET POINTER TO WHERE MESSAGE SHOULD GO
MOVNI T3,MAXNIC ;GET -MAX COUNT
SINR ;INPUT THE REPLY FROM THE SERVER NODE NCU
ERJMP [LODERR (.NRCME)] ;IF FAILED, RETURN "COMMUNICATIONS ERROR"
; VERIFY THAT RESPONSE WAS "END OF DIALOG"
MOVE T1,[POINT 8,MSGBLK] ;GET POINTER TO START OF REPLY MESSAGE
MOVEI T2,MAXNIC(T3) ;COMPUTE NUMBER OF BYTES RETURNED
SUBI T2,2 ;DECREMENT COUNT FOR TYPE CODE AND RETURN CODE
JUMPL T2,[RETBAD (.NRPRO)] ;RETURN "PROTOCOL ERROR" IF NOT ENOUGH BYTES
ILDB T4,T1 ;YES, GET DIALOG MESSAGE TYPE CODE (.LSXXX)
CAIE T4,.LMEND ;END OF DIALOG REPLY ?
LODERR (.NRPRO) ;NO, NICE PROTOCOL ERROR
ILDB T4,T1 ;GET RETURN CODE
CAIE T4,.NRSUC ;SUCCESS ?
JRST [ MOVE T1,T4 ;NO, GET RETURN CODE FROM SERVER NCU
LODERR () ] ;RETURN THE CODE TO CALLER
SETOM T1 ;NOTE THAT WE ARE NO LONGER IN LOAD DIALOG
RETSKP ;DONE, RETURN.
;MOPVER - ROUTINE TO VERIFY MOP REPLY MESSAGE AFTER TRANSFER MSG SENT
;
;ACCEPTS IN T1/ POINTER TO START OF MOP REPLY MESSAGE
; T2/ COUNT OF BYTES IN THE MOP MESSAGE
; T3/ ADDRESS OF LINE TABLE
; CALL MOPVER
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ POINTER TO START OF NICE REPLY MSG
; T2/ COUNT OF BYETS IN NICE MESSAGE
MOPVER: ASUBR <MPVPTR,MPVCNT,MPVLIN,MPVMSG>
STKVAR <MPVLNK,MPVLEN>
; DETERMINE IF THE MOP PROGRAM REQUEST MSG IS PRECEDED BY DIAGNOSTIC DATA
MOVE T2,MPVCNT ;GET COUNT OF BYTES IN MOP MESSAGE
SOSGE T2 ;AT LEAST FUNCTION CODE PRESENT ?
RETBAD (.NRIMF) ;NO, ILLEGAL MESSAGE FORMAT
MOVE T1,MPVPTR ;GET POINTER TO START OF MOP MESSAGE
ILDB T4,T1 ;GET MOP FUNCTION CODE
CAIN T4,.MPRQP ;PROGRAM REQUEST ?
JRST MPV030 ;YES, GO PROCESS IT
CAIE T4,.MPDIA ;DIAGNOSTIC DATA ?
RETBAD (.NRLPE) ;NO, LINE PROTOCOL ERROR
; HERE IF THERE IS ASCII DIAGNOSTIC DATA TO RETURN TO THE HOST FROM CHK11
CALL ASGPAG ;GET A PAGE FOR THE ASCII DATA
RETBAD () ;FAILED
MOVEM T2,MPVMSG ;SAVE MESSAGE ADDRESS
HRLI T2,(POINT 8,) ;FORM POINTER TO MESSAGE DESTINATION
MOVE T1,T2 ;COPY POINTER TO MESSAGE DESTINATION
MOVX T2,.EVASC ;GET CODE FOR ASCII DATA
CALL MAKEVT ;ASSEMBLE AN EVENT LOGGING MESSAGE HEADER
JRST MPVERR ;FAILED, RELEASE LINK AND RETURN ERROR
MOVEM T2,MPVLEN ;SAVE INITIAL LENGTH OF NICE MESSAGE
CALL REPLNK ;GET LINK TO NICE PROCESS ON HOST SYSTEM
JRST MPVERR ;FAILED
MOVEM T1,MPVLNK ;SAVE LOGICAL LINK ID
MOVE T2,MPVMSG ;GET ADDRESS OF NICE MESSAGE
HRLI T2,(POINT 8,) ;FORM POINTER TO NICE MESSAGE
MOVN T3,MPVLEN ;GET -COUNT
SOUT ;SEND FIRST PART OF NICE MESSAGE TO HOST NCU
ERJMP [MOVE T1,MPVLNK ;FAILED, GET LOGICAL LINK
TXO T1,CZ%ABT ;CLOSE THE LOGICAL LINK
CLOSF ;CLOSE THE LOGICAL LINK
NON.FATAL.ERROR
MOVX T1,.NRNCE ;GET ERROR CODE
JRST MPVERR ] ;GO RELEASE ASSIGNED PAGE
; SEND ALL THE DIAGNOSTIC DATA BACK TO THE HOST
MOVE T1,MPVPTR ;GET POINTER TO MOP MESSAGE
MOVE T2,MPVCNT ;GET COUNT OF BYTES IN MOP MESSAGE
MOVE T3,MPVLIN ;GET ADDRESS OF LINE TABLE
MOVE T4,MPVLNK ;GET LOGICAL LINK TO LOGGING NICE PROCESS
CALL SNDTXT ;GO SEND BACK THE TEXT TO THE HOST
JRST [ MOVE T1,STXLNK ;FAILED, GET LOGICAL LINK
TXO T1,CZ%ABT ;FLUSH ANYTHING IN PIPE
CLOSF ;CLOSE THE LOGICAL LINK
NON.FATAL.ERROR
MOVX T1,.NRNCE ;GET ERROR CODE
JRST MPVERR ] ;GO RELEASE ASSIGNED PAGE
MOVEM T1,MPVPTR ;SAVE POINTER TO MOP MESSAGE
MOVEM T2,MPVCNT ;SAVE COUNT OF BYTES IN MOP MESSAGE
; HERE WHEN ALL DIAGNOSTIC DATA HAS BEEN RETURNED TO THE HOST
MPV020: MOVE T1,MPVLNK ;GET LOGICAL LINK
CLOSF ;CLOSE THE LINK WHEN ALL DATA AWAY OK
NON.FATAL.ERROR ;FAILED, ISSUE MESSAGE
MOVE T1,MPVMSG ;GET ADDRESS OF ASSIGNED PAGE
CALL RELPGA ;RELEASE THE PAGE
NON.FATAL.ERROR ;FAILED
MPV030: MOVE T1,MPVPTR ;GET POINTER TO MOP MESSAGE
MOVE T2,MPVCNT ;GET NUMBER OF BYTES IN MOP MESSAGE
MOVE T3,MPVLIN ;GET ADDRESS OF LINE TABLE
CALL MAKEND ;CHECK MOP PROGRAM REQ MSG AND MAKE NICE MSG
RETBAD () ;FAILED
RETSKP ;DONE, RETURN SUCCESS
; HERE ON AN ERROR WITH A PAGE ASSIGNED
MPVERR: EXCH T1,MPVMSG ;GET ADDRESS OF MESSAGE PAGE
CALL RELPGA ;RELEASE THE PAGE
NON.FATAL.ERROR ;FAILED
MOVE T1,MPVMSG ;RESTORE ERROR CODE
RETBAD () ;FAIL
;SNDTXT - ROUTINE TO RETURN CHK11 DIAGNOSTIC TEXT TO THE HOST NICE PROCESS
;
;ACCEPTS IN T1/ POINTER TO MOP MESSAGE
; T2/ NUMBER OF BYTES LEFT IN MOP MESSAGE
; T3/ ADDRESS OF LINE TABLE
; T4/ LOGICAL LINK TO HOST NICE PROCESS
; CALL SNDTXT
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ POINTER TO MOP MESSAGE
; T2/ COUNT OF BYTES IN MOP MESSAGE
SNDTXT: ASUBR <STXPTR,STXCNT,STXLIN,STXLNK>
; LOOP TO SEND ASCII DATA BACK TO THE NICE PROCESS FOR LOGGING
STX010: MOVE T1,STXLNK ;GET LOGICAL LINK TO HOST NICE LOGGER
MOVX T2,.EDTXT ;GET ASCII DATA TYPE CODE
BOUT ;SEND ASCII DATA TYPE CODE
ERJMP [RETBAD (.NRNCE)] ;FAILED, NETWORK COMMUNICATIONS ERROR
MOVE T2,STXCNT ;GET COUNT OF BYTES IN MOP MESSAGE
SUBI T2,1 ;ALLOW FOR MOP FUNCTION CODE
CAILE T2,^D255 ;GREATER THAN MAX IMAGE ASCII FIELD SIZE ?
RETBAD (.NRIMF) ;YES, FAIL, INVALID MESSAGE FORMAT
BOUT ;SEND BACK COUNT BYTE FOR IMAGE ASCII FIELD
ERJMP [RETBAD (.NRNCE)] ;FAILED, NETWORK COMMUNICATIONS ERROR
MOVN T3,T2 ;GET -COUNT
MOVE T2,STXPTR ;GET POINTER TO START OF MOP MESSAGE
ILDB T4,T2 ;SKIP FUNCTION CODE, POINT TO START OF DATA
SOUTR ;SEND THE DATA BACK TO THE LOGGER
ERJMP [RETBAD (.NRNCE)] ;FAILED, NETWORK COMMUNICATIONS ERROR
; READ ANOTHER MOP MESSAGE
MOVE T1,STXLIN ;GET ADDRESS OF LINE TABLE
CALL DTERCV ;GO RECEIVE A MOP MESSAGE FROM THE TARGET NODE
RETBAD (.NRCME) ;RETURN "COMMUNICATIONS ERROR" ON FAILURE
MOVEM T1,STXPTR ;SAVE POINTER TO MOP MESSAGE
MOVEM T2,STXCNT ;SAVE COUNT OF BYTES IN MOP MESSAGE
; SEE IF THERE IS MORE DIAGNOSTIC DATA
MOVE T2,STXCNT ;GET COUNT OF BYTES IN MOP MESSAGE
SOSGE T2 ;AT LEAST FUNCTION CODE PRESENT ?
RETBAD (.NRIMF) ;NO, ILLEGAL MESSAGE FORMAT
MOVE T1,STXPTR ;GET POINTER TO START OF MOP MESSAGE
ILDB T4,T1 ;GET MOP FUNCTION CODE
CAIN T4,.MPRQP ;PROGRAM REQUEST ?
JRST [ MOVE T1,STXPTR ;GET POINTER TO MOP MESSAGE
MOVE T2,STXCNT ;GET NUMBER OF BYTES IN MESSAGE
RETSKP ] ;RETURN SUCCESS
CAIE T4,.MPDIA ;DIAGNOSTIC DATA ?
RETBAD (.NRLPE) ;NO, LINE PROTOCOL ERROR
JRST STX010 ;YES, GO SEND THE DATA BACK TO THE HOST
;REPLNK - ROUTINE TO GET A LOGICAL LINK TO A PROCESS ON THE SAME NODE
; THAT ORIGINATED A NICE REQUEST.
;
;CALL: CALL REPLNK
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ JFN FOR LOGICAL LINK
REPLNK: STKVAR <RPLHST,RPLLNK>
; GET HOST NAME OF TASK ORIGINALLY REQUESTING SERVICE FROM US
HRROI T3,RPLHST ;GET POINTER TO DESTINATION FOR STRING
MOVX T2,.MORHN ;GET "READ HOST NAME" FUNCTION
MOVE T1,REQLNK ;GET LOGICAL LINK TO REQUESTING TASK
MTOPR ;ADD HOST NAME TO STRING
ERJMP [RETBAD (.NRNPE)] ;FAILED, RETURN ERROR
; GET A LOGICAL LINK TO THE NCU ON THE REQUESTING HOST
HRRI T1,RPLHST ;GET ADDRESS OF HOST NAME
HRLI T1,(POINT 7,) ;FORM POINTER TO HOST NAME
CALLRET GETLNK ;GO GET A LOGICAL LINK TO THE NCU
;LSTBT - ROUTINE TO PROCESS A NICE LINE SERVICE MESSAGE TO TRIGGER THE
; BOOTSTRAP ROM IN AN ADJACENT TARGET NODE.
;
;ACCEPTS IN T1/ POINTER TO PARAMETERS IN NICE LINE SERVICE MSG (BOOT PASSWORD)
; T2/ NUMBER OF BYTES REMAINING IN MESSAGE
; T3/ ADDRESS OF LINE TABLE
; CALL LSTBT
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, BOOTSTRAP ROM TRIGGERED
LSTBT: TDZA T4,T4 ;NOTE THAT NO PROGRAM DATA WAS REQUESTED
LSTBP: SETOM T4 ;PROGRAM DATA IS WANTED
STKVAR <LSTLIN,LSTFLG,<LSTBPW,2>>
MOVEM T3,LSTLIN ;SAVE LINE TABLE ADDRESS
MOVEM T4,LSTFLG ;SAVE FLAG INDICATING WHICH TYPE OF CALL
CALL GETBPW ;GO EXTRACT THE BOOT PASSWORD FROM THE MESSAGE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
DMOVEM T3,LSTBPW ;SAVE BOOT PASSWORD
; CHECK THE BOOT PASSWORD FOR THIS TARGET NODE
; ACTIVATE (TRIGGER) THE ROM IN THE TARGET NODE
MOVE T1,LSTLIN ;GET ADDRESS OF LINE TABLE
CALL DTESTP ;TERMINATE ANY PROTOCL RUNNING ON THE TARGET
RETBAD (.NRLPE) ;FAILED, RETURN "LINE PROTOCOL ERROR"
MOVE T1,LSTLIN ;GET ADDRESS OF LINE TABLE
CALL DTEINI ;GO TRIGGER THE ROM
RETBAD (.NRLPE) ;FAILED, RETURN 'LINE PROTOCOL ERROR'
; SEND BACK A "SUCCESS" RETURN CODE TO THE REQUESTING TASK
MOVE T1,REQLNK ;GET LOGICAL LINK (JFN) TO REQUESTING TASK
MOVE T2,[POINT 8,[BYTE (8) .NRSUC]] ;GET POINTER TO RETURN CODE
MOVNI T3,1 ;ONE BYTE MESSAGE
SOUTR ;RETURN THE SUCCESS CODE
ERJMP [RETBAD (.NRCME)] ;RETURN "COMMUNICATIONS ERROR" ON FAILURE
; IF NO PROGRAM DATA WANTED, RETURN, ELSE SEND BACK THE PROGRAM DATA
SKIPN LSTFLG ;PROGRAM DATA WANTED ?
RETSKP ;DONE, RETURN SUCCESS
MOVE T1,REQLNK ;YES, GET LOGICAL LINK TO REQUESTING TASK
MOVE T2,[POINT 8,[ BYTE (8) .DTDTE, .CP11, .PTSLD, 0 ]]
MOVNI T3,4 ;NUMBER OF BYTES OF PROGRAM DATA
SOUTR ;SEND BACK THE PROGRAM DATA
ERJMP [RETBAD (.NRCME)] ;RETURN "'COMMUNICATIONS ERROR' ON FAILURE
RETSKP ;DONE, RETURN
;MOPLDR - ROUTINE TO ADD BYTES TO A LOAD IMAGE BEING CONSTRUCTED
; FOR A SECONDARY LOADER
;
;ACCEPTS IN T1/ POINTER TO MEMORY IMAGE DATA TO BE LOADED
; T2/ NUMBER OF BYTES OF MEMORY IMAGE DATA
; T3/ ADDRESS OF LINE TABLE
; CALL MOPLDR
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, DATA ADDED TO LOAD IMAGE
MOPLDR: ASUBR <MLDPTR,MLDCNT,MLDLIN>
STKVAR <MLDCTR,MLDPTB>
; SET UP WORD CONTAINING ADDRESS OF BYTE POINTER TABLE TO USE
MOVE T1,MLDLIN ;GET ADDRESS OF LINE TABLE ENTRY
LOAD T1,LNPGM,(T1) ;GET PROGRAM TYPE BEING LOADED
MOVSI T4,-PTRSIZ ;SET UP TO FIND CORRECT BYTE POINTER TABLE
LODM10: HLRZ T2,PTRTAB(T4) ;GET A PROGRAM TYPE FROM THE TABLE
CAMN T2,T1 ;FOUND TYPE OF PROGRAM BEING LOADED ?
JRST LODM20 ;YES, GO GET ADDRESS OF BYTE POINTER TABLE
AOBJN T4,LODM10 ;NO, LOOP OVER ALL PROGRAM TYPES
RETBAD (.NRIPV) ;FAILED, RETURN ERROR TO CALLER
; GET THE ADDRESS OF THE BYTE POINTER TABLE
LODM20: HRRZ T1,PTRTAB(T4) ;GET ADDRESS OF BYTE POINTER TABLE TO USE
MOVEM T1,MLDPTB ;SAVE POINTER TABLE ADDRESS
; SET UP AN INDEX INTO BYTE POINTER TABLE AND OFFSET INTO LOAD IMAGE
MOVE T4,MLDLIN ;GET ADDRESS OF LINE TABLE
LOAD T1,LNADR,(T4) ;GET LOAD ADDRESS FOR THIS DATA
IDIVI T1,BPWRD ;COMPUTE OFFSET INTO LOAD IMAGE
MOVE T4,MLDLIN ;GET ADDRESS OF LINE TABLE
LOAD T4,LNMSG,(T4) ;GET POINTER TO MOP MESSAGE BLOCK FOR THIS LINE
ADD T1,T4 ;COMPUTE ADDRESS TO START LOADING AT
MOVEM T1,T3 ;SAVE LOADING ADDRESS
MOVEM T2,MLDCTR ;SAVE INDEX INTO BYTE POINTER TABLE
; ..
; ..
; DEPOSIT THE DATA BYTES INTO THE LOAD IMAGE RECORD
; (T3 HAS THE DESTINATION ADDRESS & THE BYTE POINTERS ARE INDEXED BY T3)
HRRZ T4,MLDCNT ;GET NUMBER OF DATA BYTES TO DEPOSIT
JUMPE T4,RSKP ;DONE IF NO DATA TO BE LOADED
LODM30: ILDB T1,MLDPTR ;GET A DATA BYTE FROM THE DIALOG MESSAGE
LDB T2,[POINT 2,MLDCTR,35] ;GET INDEX INTO BYTE POINTER TABLE
ADD T2,MLDPTB ;FORM ADDRESS OF A BYTE POINTER
DPB T1,(T2) ;DEPOSIT THE BYTE
AOS T2,MLDCTR ;INCREMENT THE INDEX COUNTER
TXNN T2,3 ;INCREMENTED TO FIRST BYTE OF NEXT WORD ?
ADDI T3,1 ;YES, INCREMENT DESTINATION ADDRESS
SOJG T4,LODM30 ;LOOP OVER ALL DATA BYTES IN MESSAGE
; UPDATE THE NEXT LOAD ADDRESS TO USE
MOVE T4,MLDLIN ;GET ADDRESS OF LINE TABLE
LOAD T1,LNADR,(T4) ;GET ADDRESS USED TO LOAD THIS DATA
ADD T1,MLDCNT ;FORM NEXT ADDRESS TO USE
STOR T1,LNADR,(T4) ;STORE NEXT BASE ADDRESS
RETSKP ;DONE, RETURN SUCCESS
;CHKMOP - ROUTINE TO CHECK A MOP "REQUEST LOAD" MESSAGE AND UPDATE THE
; NEXT LOAD NUMBER EXPECTED.
;
;ACCEPTS IN T1/ POINTER TO START OF MOP MESSAGE
; T2/ NUMBER OF BYTES IN THE MESSAGE
; T3/ ADDRESS OF LINE TABLE
; CALL CHKMOP
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, MESSAGE IS OK AND NEXT LOAD # IS UPDATED
CHKMOP: ASUBR <CKMPTR,CKMCNT,CKMLIN>
SUBI T2,2 ;AT LEAST FUNCTION AND LOAD # PRESENT ?
JUMPL T2,[RETBAD (.NRCME)] ;IF NOT, RETURN "COMMUNICATIONS ERROR"
ILDB T4,CKMPTR ;GET MOP FUNCTION CODE
CAIE T4,.MPRQL ;REQUEST MEMORY LOAD FUNCTION ?
RETBAD (.NRCME) ;NO, RETURN "COMMUNICATIONS ERROR"
ILDB T4,CKMPTR ;YES, GET NEXT LOAD NUMBER REQUESTED
INCR LNLDN,(T3) ;INCREMENT LOAD NUMBER
LOAD T1,LNLDN,(T3) ;GET NEXT LOAD NUMBER
CAME T1,T4 ;CORRECT LOAD NUMBER REQUESTED ?
RETBAD (.NRCME) ;NO, RETURN "COMMUNICATIONS ERROR"
STOR T1,LNLDN,(T3) ;YES, STORE UPDATED LOAD NUMBER IN LINE TABLE
SOSGE T2 ;ANOTHER BYTE IN MOP MESSAGE ?
RETSKP ;NO, NO STATUS CODE IS PRESENT, ASSUME SUCCESS
ILDB T4,CKMPTR ;YES, GET THE STATUS CODE FROM THE LOADER
CAIE T4,.MPACK ;SUCCESS ON PREVIOUS LOAD ?
RETBAD (.NRCME) ;NO, RETURN "COMMUNICATIONS ERROR"
RETSKP ;YES, DONE. RETURN SUCCESS.
;SNDEND - ROUTINE TO SEND BACK AN END-OF-DIALOG MESSAGE WHEN A LINE SERVICE
; DIALOG OPERATION HAS FAILED.
;
;ACCEPTS IN T1/ NICE RETURN CODE
; CALL SNDEND
;RETURNS: +1 ALWAYS, WITH MESSAGE SENT IF POSSIBLE
SNDEND: ASUBR <SEMCOD>
CALL CLRMSG ;GO CLEAR NICE MESSAGE AREA
MOVE T1,[POINT 8,MSGBLK] ;GET POINTER TO MESSAGE AREA
MOVX T4,.LMEND ;GET END-OF-DIALOG MESSAGE TYPE CODE
IDPB T4,T1 ;ADD TYPE CODE TO MESSAGE
MOVE T4,SEMCOD ;GET RETURN CODE (.NRXXX)
IDPB T4,T1 ;ADD RETURN CODE TO MESSAGE
; SEND THE MESSAGE BACK TO ORIGINATOR OR THIS REQUEST
MOVNI T3,2 ;GET NUMBER OF BYTES IN THE MESSAGE
HRLI T2,(POINT 8,) ;FORM BYTE POINTER TO START
HRRI T2,MSGBLK ; OF THE END-OF-DIALOG MESSAGE
MOVE T1,REQLNK ;GET LOGICAL LINK (JFN) TO REQUESTING TASK
SOUTR ;SEND THE MESSAGE
ERJMP .+1 ;FAILED, IGNORE FAILURE
RET ;DONE, RETURN
;INIPRO - ROUTINE TO INITIATE PROTOCOL ON A LINE
;
;ACCPETS IN T1/ ADDRESS OF LINE TABLE
; CALL INIPRO
;RETURNS: +1 FAILED, COULD NOT INITIATE PROTOCOL
; +2 SUCCESS, PROTOCOL INITIATED IF ANY PROTOCOL TYPE HAD BEEN
; SPECIFIED FOR THE TARGET NODE.
INIPRO: ASUBR <IPRLIN,IPRPRO,IPRCNT,IPRADJ>
HRROI T1,OURNAM ;GET POINTER TO NAME OF OUR NODE
CALL GETNIB ;GET THE NIB ADDRESS FOR OUR NODE
RETBAD (.NRICF) ;FAILED, "INVALID CONFIGURATION FILE"
LOAD T1,NDLIN,(T1) ;GET ADDRESS OF LINE ADJACENCY TABLE
MOVEM T1,IPRADJ ;SAVE TABLE ADDRESS
MOVE T4,IPRLIN ;GET ADDRESS OF LINE TABLE
LOAD T1,LNDTE,(T4) ;GET DTE20 NUMBER
CALL CVTDEV ;CONVERT TO STANDARD NICE LINE ID
RETBAD (.NRNPE) ;FAILED, NICE PROGRAM ERROR
MOVE T1,IPRADJ ;RESTORE ADJACENCY TABLE ADDRESS
CALL FNDTGT ;GET ADDRESS OF NIB FOR TARGET NODE
RETBAD (.NRICF) ;FAILED, RETURN "CONFIGURATION FILE ERROR"
JE NDPST,(T1),RSKP ;IF NO PROTOCOL TYPE HAS BEEN SET, WE ARE DONE
LOAD T2,NDPRO,(T1) ;GET PROTOCOL TYPE TO INITIATE ON THIS LINE
MOVEM T2,IPRPRO ;SAVE PROTOCOL TYPE
; LOOP FOR 3 MINUTES TRYING TO INITIATE PROTOCOL, THEN GIVE ERROR IF FAILED
SETZM IPRCNT ;INITIALIZE COUNT OF TRIALS
INIP10: MOVE T2,IPRPRO ;GET PROTOCOL TYPE
MOVE T1,IPRLIN ;GET ADDRESS OF LINE TABLE
CALL DTEGO ;INITIATE PROTOCOL
JRST [ AOS T1,IPRCNT ;INCREMENT LOOP COUNTER
CAIL T1,^D6 ;BEEN TRYING FOR 1 MINUTE YET ?
RETBAD (.NRCME) ;YES, RETURN "LINE COMMUNICATIONS ERROR"
MOVX T1,^D1000*^D10 ;WAIT TIME IS 10 SECONDS
DISMS ;WAIT FOR TARGET NODE TO BECOME READY
JRST INIP10 ] ;TRY TO INIT AGAIN
RETSKP ;DONE, RETURN SUCCESS
;LSDMP - ROUTINE TO INITIATE AN UP-LINE DUMP DIALOG
;
;ACCEPTS IN T1/ POINTER TO DIALOG DATA IN LINE SERVICE MESSAGE
; T2/ NUMBER OF BYTES REMAINING IN MESSAGE
; T3/ ADDRESS OF LINE TABLE
; CALL LSDMP
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS
LSDMP: ASUBR <LSDPTR,LSDCNT,LSDLIN,LSDNUM>
CALL GETMEM ;GO GET INITIAL ADDRESS AT WHICH TO START DUMP
RETBAD () ;FAILED, RETURN ERROR TO CALLER
JUMPN T3,[RETBAD (.NRNPE)] ;FAIL IF NOT STARTING AT 0
MOVE T4,LSDLIN ;GET ADDRESS OF LINE TABLE
STOR T3,LNADR,(T4) ;STORE STARTING ADDRESS FOR DUMP
CALL GETMEM ;EXTRACT NUMBER OF LOCATIONS TO DUMP FROM MSG
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVEM T3,LSDNUM ;SAVE NUMBER OF BYTES TO BE DUMPED
MOVX T3,INIDMP ;INITIAL COUNT IS SIZE OF DUMP BOOTSTRAP+BUFFER
MOVE T4,LSDLIN ;GET ADDRESS OF LINE TABLE
STOR T3,LNDCT,(T4) ;STORE NUMBER OF BYTES LEFT TO DUMP
; SEND BACK A SUCCESS RETURN CODE TO ORIGINATOR OF THE DIALOG
MOVE T1,REQLNK ;GET LOGICAL LINK (JFN) TO ORIGINATING TASK
MOVE T2,[POINT 8,[BYTE (8) .NRSUC]] ;GET SUCCESS CODE
MOVNI T3,1 ;MESSAGE CONTAINS ONE BYTE
SOUTR ;SEND BACK THE MESSAGE
ERJMP [RETBAD (.NRCME)] ;FAILED, RETURN "COMMUNICATIONS ERROR"
; TRIGGER THE ROM BEFORE STARTING THE DUMP
MOVE T1,LSDLIN ;GET ADDRESS OF LINE TABLE
CALL DTESTP ;FIRST TERMINATE ANY PROTOCOL OVER THIS DTE
RETBAD (.NRCME) ;FAILED, RETURN "LINE COMMUNICATIONS ERROR"
MOVE T1,LSDLIN ;GET ADDRESS OF LINE TABLE
CALL DTEINI ;TRIGGER THE ROM
RETBAD (.NRCME) ;FAILED
; DUMP THE FIRST "INIDMP" WORDS OF PDP-11 MEMORY
MOVE T1,LSDLIN ;GET ADDRESS OF LINE TABLE
CALL ROMDMP ;DO A ROM DUMP OF FIRST "INIDMP" WORDS
RETBAD () ;FAILED
; FIRST "INIDMP" WORDS HAVE BEEN DUMPED. NOW LOAD A DUMP BOOTSTRAP PROGRAM
MOVE T1,LSDLIN ;GET ADDRESS OF LINE TABLE
LOAD T4,LNMSG,(T1) ;GET ADDRESS OF WHERE -11 PROGRAM GOES
HRLI T4,DBOOT ;GET ADDRESS OF DUMP BOOTSTRAP
HRRZ T3,T4 ;COPY DESTINATION ADDRESS
BLT T4,200(T3) ;COPY 256 WORD (-11 WORDS) DUMP PROGRAM
CALL DTESLD ;LOAD THE DUMP BOOTSTRAP
RETBAD (.NRCME) ;FAILED
; FIRST 256 WORDS HAVE BEEN DUMPED. NOW LOAD A DUMP BOOTSTRAP PROGRAM
;
; MOVE T1,LSDLIN ;GET ADDRESS OF LINE TABLE
; CALL LODDMP ;GO LOAD A DUMP PROGRAM
; RETBAD (.NRCME) ;FAILED
; NOW DUMP THE REMAINING MEMORY USING THE DUMP BOOTSTRAP
MOVE T1,LSDNUM ;GET NUMBER OF BYTES TO DUMP
MOVE T2,LSDLIN ;GET ADDRESS OF LINE TABLE
CALL MOPDMP ;GO DO A MOP DUMP
RETBAD () ;FAILED
; RETURN AN END-OF-DIALOG MESSAGE TO THE HOST NCU
MOVX T1,.NRSUC ;GET SUCCESS RETURN CODE
CALL SNDEND ;GO SEND AN END-OF-DIALOG MESSAGE TO HOST NCU
RETSKP ;DONE, RETURN SUCCESS
; DUMP BOOTSTRAP CODE
DBOOT:
001200010040
000700007000
427446000060
153444100000
007754256140
003470256000
700000256040
376030204760
751400204760
751410204760
751420204760
751470120760
751600256760
037003647040
053574174000
751670256760
000007773640
053400400000
053574002340
000020454540
713574000200
751610136200
057427647040
031424146120
031424146120
042421056100
177774146120
031424010140
113133456000
004000136200
040024120100
040030256040
001060244540
101134016440
417760002200
043431456140
002420210040
351137777440
213413777700
027424030020
025010404560
000020020100
025410257560
700000010040
041334010000
053400011020
023734004000
153444100000
007764256000
002264256040
000044204060
023734004340
513734000160
001614020100
513734000100
001564030020
004260356000
001550200760
003511456760
000024016440
073414006200
073410006140
441574016520
473574005720
003532204760
003536356760
001324016600
355137777640
041577647100
073414005100
213417776000
313415000000
053410016620
451511760040
213707000000
777620256000
003510117560
000060003560
777010015200
042307777100
302400201420
777720256220
240000257420
000004000040
053444050000
153446400000
007766007360
001034211420
777621412000
040307777540
301002060200
006034201140
700010120000
023734000100
053010204000
053444002020
701014030060
013551256040
400000130040
213411200000
007520205420
777712656220
001010037720
401470136000
004015457420
200003777100
041410004160
020000140000
002120000000
000000000040
000000000000
000000000000
000000000000
000000000000
000000000000
000000000000
000000000000
000070000000
000000000000
000000000000
000000000000
000000000000
000000000000
000000004540
000000001300
000000000000
000000000000
000000000000
; LODDMP - ROUTINE TO LOAD A DUMP PROGRAM INTO AN ADJACENT PDP-11
;
;ACCEPTS IN T1/ ADDRESS OF LINE TABLE
; CALL LODDMP
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, PROGRAM LOADED AND STARTED
LODDMP: ASUBR <LDPLIN,<LDPNOD,2>,LDPLNK>
; GET A LINK TO THE HOST INITIATING THIS DUMP OPERATION
MOVE T1,REQLNK ;GET LINK TO REQUESTING TASK
MOVX T2,.MORHN ;READ HOST NAME FUNCTION
HRROI T3,LDPNOD ;GET POINTER TO WHERE NAME SHOULD GO
MTOPR ;GET THE NODE NAME
ERJMP [RETBAD (.NRNPE)] ;FAILED
HRROI T1,LDPNOD ;GET POINTER TO HOST NODE NAME
CALL GETLNK ;GO GET A LOGICAL LINK TO THE HOST
RETBAD () ;FAILED
MOVEM T1,LDPLNK ;SAVE LOGICAL LINK
; GO ASSEMBLE A NICE "REQUEST DOWN-LINE LOAD" MESSAGE
MOVE T1,LDPLIN ;GET ADDRESS OF LINE TABLE
CALL MAKRQL ;GO ASSEMBLE THE NICE MESSAGE
; SEND A DOWN-LINE LOAD REQUEST TO THE HOST TO LOAD THE DUMP PROGRAM
; MOVE T1,LDPLNK ;GET LOGICAL LINK
; MOVE T2,[POINT 8,LODMSG] ;GET POINTER TO NICE LOAD REQUEST MESSAGE
; MOVNI T3,LDMSIZ ;GET -COUNT
SOUTR ;SEND THE MESSAGE TO THE HOST
ERJMP [RETBAD (.NRNCE)] ;FAILED
; MOPDMP - ROUTINE TO DUMP AN ADJACENT NODE'S MEMORY USING THE MOP PROTOCOL
;
;ACCEPTS IN T1/ NUMBER OF LOCATIONS TO DUMP
; T2/ ADDRESS OF LINE TABLE
; CALL MOPDMP
;RETURNS: +1 FAILED
; +2 SUCCESS, DATA RETURNED TO HOST NICE PROCESS
MOPDMP: ASUBR <MPDNUM,MPDLIN,MPDPTR,MPDCNT>
; RECEIVE "MOP MODE RUNNING" MESSAGE FROM DN20
MOVE T1,MPDLIN ;GET ADDRESS OF LINE TABLE
CALL DTERCV ;RECEIVE A MOP MESSAGE FROM ADJACENT NODE
RETBAD () ;FAILED
CALL CHKMMR ;GO CHECK MOP MODE RUNNING MSG AND GET COUNT
RETBAD () ;FAILED, RETURN ERROR
CAMGE T1,MPDNUM ;MORE MEMORY THERE THAN WAS REQUESTED ?
MOVEM T1,MPDNUM ;NO, USE ONLY WHAT IS THERE
; SAVE TOTAL NUMBER OF BYTES TO BE DUMPED AND INITIAL DUMP ADDRESS
MOVE T1,MPDNUM ;GET NUMBER OF BYTES REQUESTED
SUBI T1,INIDMP ;COMPUTE NUMBER STILL LEFT TO DUMP
MOVE T4,MPDLIN ;GET ADDRESS OF LINE TABLE
STOR T1,LNDCT,(T4) ;STORE NUMBER OF BYTES LEFT TO DUMP
MOVX T1,INIDMP ;GET INITIAL ADDRESS FOR DUMP
STOR T1,LNADR,(T4) ;STORE NEXT ADDRESS TO START AT
;..
;..
; SEND A MOP "REQUEST MEMORY DUMP" MESSAGE TO THE DUMP PROGRAM
MOPD10: MOVE T4,MPDLIN ;GET ADDRESS OF LINE TABLE
LOAD T3,LNDCT,(T4) ;GET NUMBER OF BYTES LEFT TO DUMP
JUMPLE T3,RSKP ;IF NO MORE DATA TO DUMP, THEN DONE
LOAD T1,LNADR,(T4) ;GET NEXT BYTE TO BE DUMPED
MOVX T2,RCVMAX-5 ;GET AMOUNT OF MEMORY WE WANT
; = MAX - NUMBER OF MOP OVERHEAD BYTES
CAML T2,T3 ;LESS THAN THAT STILL LEFT ?
MOVE T2,T3 ;YES, USE LESSER AMOUNT
LOAD T3,LNMSG,(T4) ;SAVE POINTER TO MOP MESSAGE
CALL MAKRQD ;GO MAKE A MOP DUMP REQUEST MESSAGE
MOVE T4,MPDLIN ;GET ADDRESS OF LINE TABLE
STOR T2,LNCNT,(T4) ;SAVE SIZE OF MOP MESSAGE
MOVE T1,MPDLIN ;GET ADDRESS OF LINE TABLE
CALL DTESND ;SEND THE "REQUEST DUMP" MOP MESSAGE
RETBAD () ;FAILED
; RECEIVE A MOP "MEMORY DUMP DATA" MESSAGE
MOVE T1,MPDLIN ;GET ADDRESS OF LINE TABLE
CALL DTERCV ;RECEIVE A MOP MESSAGE FROM ADJACENT NODE
RETBAD () ;FAILED
MOVEM T2,MPDCNT ;SAVE NUMBER OF BYTES IN MSG RECEIVED
; CHECK THE MOP MESSAGE JUST READ
CALL MOPCHK ;GO VERIFY MOP MESSAGE
RETBAD () ;FAILED
MOVE T4,MPDLIN ;GET ADDRESS OF LINE TABLE
LOAD T3,LNADR,(T4) ;GET ADDRESS USED FOR THIS DUMP
ADD T3,T2 ;COMPUTE NEXT ADDRESS TO START AT
STOR T3,LNADR,(T4) ;SAVE FOR NEXT PASS
LOAD T3,LNDCT,(T4) ;GET TOTAL NUMBER OF BYTES LEFT TO DUMP
SUB T3,T2 ;COMPUTE TOTAL LEFT AFTER THIS PASS
STOR T3,LNDCT,(T4) ;SAVE TOTAL NUMBER OF BYTES LEFT TO DUMP
; RETURN THE DUMP DATA TO THE HOST NICE PROCESS
CALL SNDDAT ;GO SEND DUMP DATA BACK TO HOST NICE PROCESS
RETBAD () ;FAILED
JRST MOPD10 ;LOOP BACK FOR MORE DATA
;SNDDAT - ROUTINE TO RETURN DUMP DATA TO HOST NICE PROCESS
;
;ACCEPTS IN T1/ POINTER TO DATA TO BE RETURNED
; T2/ NUMBER OF DATA BYTES TO RETURN
; CALL SNDDAT
;RETURNS: +1 FAILED
; +2 SUCCESS
SNDDAT: ASUBR <SDTPTR,SDTCNT>
MOVE T1,REQLNK ;GET LOGICAL LINK TO HOST NICE PROCESS
MOVE T2,[POINT 8,[BYTE (8) .LMMEM, .CP11]]
MOVNI T3,2 ;MESSAGE BEGINS WITH TWO BYTES
SOUT ;OUTPUT FIRST PART OF NICE MESSAGE
ERJMP [RETBAD (.NRNCE)] ;FAILED
MOVN T3,SDTCNT ;GET -COUNT OF BYTES TO RETURN
MOVE T2,SDTPTR ;COPY POINTER TO DATA BYTES
SOUTR ;RETURN DATA TO HOST NICE PROCESS
ERJMP [RETBAD (.NRNPE)] ;RETURN ERROR ON FAILURE
RETSKP ;DONE, RETURN SUCCESS
; ROMDMP - ROUTINE TO DUMP AN ADJACENT PDP-11 USING ITS ROM
;
;ACCEPTS IN T1/ ADDRESS OF LINE TABLE
; CALL ROMDMP
;RETURNS: +1 FAILED
; +2 SUCCESS
; GET SOME MEMORY IMAGE DATA FROM THE ADJACENT NODE
ROMDMP: ASUBR <RDMLIN>
RMDMP2: MOVE T1,RDMLIN ;GET ADDRESS OF LINE TABLE
CALL DTEDMP ;GO RECEIVE SOME DATA
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVE T4,RDMLIN ;GET ADDRESS OF LINE TABLE
LOAD T1,LNDCT,(T4) ;GET TOTAL NUMBER OF BYTES LEFT TO DUMP
LOAD T2,LNCNT,(T4) ;GET NUMBER OF BYTES JUST DUMPED
SUB T1,T2 ;COMPUTE NUMBER OF BYTES REMAINING TO BE DUMPED
STOR T1,LNDCT,(T4) ;STORE NUMBER OF BYTES STILL LEFT TO DUMP
; RETURN THE MEMORY IMAGE DATA TO REQUESTING HOST NCU
MOVE T1,RDMLIN ;GET ADDRESS OF LINE TABLE
LOAD T1,LNMSG,(T1) ;GET POINTER TO DUMP DATA
MOVEI T1,@T1 ;GET ADDRESS OF DUMP DATA
CALL MAKIMD ;GO MAKE A DUMP DIALOG MEMORY IMAGE MESSAGE
RETBAD () ;FAILED, RETURN ERROR
MOVN T3,T2 ;GET -COUNT
MOVE T2,T1 ;COPY POINTER TO MEMORY IMAGE DATA MESSAGE
MOVE T1,REQLNK ;GET LOGICAL LINK (JFN) TO HOST NCU
SOUTR ;SEND THE MEMORY IMAGE MESSAGE BACK TO THE HOST
ERJMP [RETBAD (.NRNCE)] ;FAILED, "NETWORK COMMUNICATIONS ERROR"
; IF THERE IS MORE DATA TO DUMP, LOOP BACK AND GET MORE DATA FROM DTE
MOVE T4,RDMLIN ;GET ADDRESS OF LINE TABLE
JN LNDCT,(T4),RMDMP2 ;LOOP BACK IF THERE IS MORE DATA TO DUMP
RETSKP ;DONE, RETURN
;CHKMMR - ROUTINE TO CHECK A "MOP MODE RUNNING" MESSAGE FROM ADJACENT DN20
;
;ACCEPTS IN T1/ POINTER TO MOP MESSAGE
; T2/ NUMBER OF BYTES IN MOP MESSAGE
; CALL CHKMMR
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ SIZE OF MEMORY TO BE DUMPED
CHKMMR: ASUBR <CMRPTR,CMRCNT>
CAIE T2,^D8 ;CORRECT NUMBER OF BYTES IN MESSAGE ?
RETBAD (.NRIMF) ;NO, FAIL
ILDB T4,T1 ;GET MOP FUNCTION CODE
CAIE T4,.MPMMR ;MOP MODE RUNNING ?
RETBAD (.NRIMF) ;NO, FAIL
ILDB T4,T1 ;GET DEVICE TYPE
CAIE T4,.DTDTE ;DTE20 ?
RETBAD (.NRILN) ;NO, FAIL
ILDB T4,T1 ;GET STATION ADDRESS
CAIE T4,1 ;PT - TO - PT ?
RETBAD (.NRIMF) ;NO, FAIL
CALL GETMEM ;GO GET MEMORY SIZE
RETBAD () ;FAILED, BAD MESSAGE
ILDB T4,T1 ;GET FEATURES MASK
TXNN T4,MP%DMP ;DUMP SUPPORTED ?
RETBAD (.NRFNC) ;NO, FAIL
MOVE T1,T3 ;GET MEMORY SIZE
RETSKP ;DONE, RETURN SUCCESS
; MOPCHK - ROUTINE TO CHECK MOP "MEMORY DUMP DATA" MESSAGE
;
;ACCEPTS IN T1/ POINTER TO START OF MOP "MEMORY DUMP DATA" MESSAGE
; T2/ NUMBER OF BYTES IN MOP MESSAGE
; CALL MOPCHK
;RETURNS: +1 FAILED
; +2 SUCCESS, WITH T1/ POINTER TO START OF DATA IN MSG
; T2/ NUMBER OF DATA BYTES IN THE MSG
MOPCHK: SOSGE T2 ;AT LEAST ONE BYTE IN MESSAGE
RETBAD (.NRIMF) ;NO, NOT EVEN A FUNCTION CODE THERE !
ILDB T4,T1 ;GET MOP FUNCTION CODE
CAIE T4,.MPDMP ;MEMORY DUMP DATA ?
RETBAD (.NRIMF) ;FAILED, INVALID MESSAGE FORMAT
CALL GETMEM ;GO GET MEMORY ADDRESS FROM MESSAGE
RETBAD () ;FAILED, RETURN ERROR
RETSKP ;DONE, RETURN SUCCESS
SUBTTL NICE Process -- Event Logger
REQLOG: SAVEPQ
STKVAR <<RLGSRC,2>,RLGSEQ,RLGOPT>
; EXTRACT FIELDS FROM THE INITIAL PART OF THE NICE MESSAGE
CALL GETFCN ;EXTRACT FUNCTION CODE FROM MESSAGE
RETBAD () ;FAILED
CALL GETOPT ;GET THE OPTION FROM THE MESSAGE
RETBAD () ;FAILED
MOVEM T4,RLGOPT ;SAVE OPTION CODE
HRRI T3,RLGSRC ;GET ADDRESS OF SOURCE NODE NAME STRING
HRLI T3,(POINT 7,) ;FORM POINTER TO STRING DESTINATION
CALL GETIMA ;GO EXTRACT SOURCE NODE NAME
RETBAD () ;FAILED
HRLI T3,440000 ;USE POINTER WITH ZERO SIZE FIELD TO DISCARD
CALL GETIMA ; IMAGE ASCII FIELD HOLDING SOURCE COMPONENT
RETBAD () ;FAILED
CALL GETSEQ ;GET SEQUENCE NUMBER FROM MESSAGE
RETBAD () ;FAILED
MOVEM T3,RLGSEQ ;SAVE SEQUENCE NUMBER
; EXTRACT EVENT TYPE CODE FROM MESSAGE AND DISPATCH TO PROCESSING ROUTINE
CALL GETEVT ;GO GET EVENT CODE FROM NICE MESSAGE
RETBAD () ;FAILED
HRR T4,T3 ;COPY EVENT CODE
HRL T4,RLGSEQ ;GET SEQUENCE NUMBER
HRRI T3,RLGSRC ;GET ADDRESS OF SOURCE NODE NAME
HRLI T3,(POINT 7,) ;FORM POINTER TO NAME
CALL DOLOG ;GO MAKE THE LOG ENTRY
RETBAD () ;FAILED
RETSKP ;DONE, RETURN SUCCESS
;DOLOG - ROUTINE TO LOG DATA FROM THE NETWORK
;
;ACCEPTS IN T1/ POINTER TO "LOG DATA" PORTION OF NICE REQUEST-LOG MESSAGE
; T2/ NUMBER OF BYTES REMAINING IN NICE MESSAGE
; T3/ POINTER TO SOURCE NODE NAME
; T4/ SEQUENCE NUMBER,,EVENT CODE (.EVXXX)
DOLOG: SAVEPQ
ASUBR <DLGPTR,DLGCNT,DLGSRC,DLGEVT>
STKVAR <DLGSEQ>
HLRZM T4,DLGSEQ ;STORE SEQUENCE NUMBER
HRRZS DLGEVT ;KEEP JUST EVENT CODE
; VALIDATE EVENT CODE
MOVE T4,DLGEVT ;GET EVENT CODE TYPE
CAILE T4,EVTSIZ-1 ;WITHIN VALID RANGE ?
RETBAD (.NRIPV) ;NO, INVALID PARAMETER VALUE
; ASSIGN A PAGE FOR THE SYSERR ENTRY
CALL ASGPAG ;ASSIGN A PAGE TO HOLD SYSERR ENTRY
RETBAD () ;FAILED
MOVEI P1,(T2) ;SAVE BASE ADDRESS OF SYSERR ENTRY
MOVEI P2,.SYDAT(P1) ;GET ADR OF NETWORK HEADER PART OF ENTRY
; SET UP NETWORK HEADER PART OF SYSERR ENTRY WITH COMMON INFO
MOVE T1,P1 ;GET BASE ADDRESS OF SYSERR ENTRY
MOVE T2,DLGSRC ;GET POINTER TO SOURCE NODE
MOVE T3,DLGSEQ ;GET SEQUENCE NUMBER
CALL EVTSYR ;SET UP NETWORK HEADER
JRST DOLOGX ;FAILED, GO RELEASE PAGE
; DISPATCH TO PROPER PROCESSING ROUTINE FOR THIS EVENT TYPE
MOVE T3,T1 ;GET NEXT ADR TO USE IN SYSERR ENTRY
MOVE T1,DLGPTR ;GET POINTER TO REMAINDER OF NICE MESSAGE
MOVE T2,DLGCNT ;GET NUMBER OF BYTES LEFT IN MESSAGE
MOVE T4,DLGEVT ;GET EVENT TYPE CODE
CALL @EVTTAB(T4) ;YES, DISPATCH TO PROCESSING ROUTINE
JRST DOLOGX ;FAILED, RELEASE SYSERR PAGE
STOR T2,SYLEN,(P1) ;STORE LENGTH OF ENTRY
MOVE T1,P1 ;GET BASE ADDRESS OF SYSERR ENTRY (LENGTH IN T2)
SYERR ;RECORD THE SYSERR ENTRY
ERJMP [ NON.FATAL.ERROR (.ERR29) ;COULD NOT MAKE SYSERR ENTRY
JRST .+1 ]
MOVE T1,P1 ;GET ADDRESS OF SYSERR PAGE
CALL RELPGA ;RELEASE THE PAGE
NON.FATAL.ERROR ;FAILED
RETSKP ;DONE, RETURN SUCCESS
; HERE ON ERROR WITH SYSERR PAGE ASSIGNED
DOLOGX: EXCH T1,P1 ;SAVE ERROR CODE, GET ADDRESS OF SYSERR PAGE
CALL RELPGA ;RELEASE THE PAGE
NON.FATAL.ERROR ;FAILED
MOVE T1,P1 ;RESTORE ERROR CODE
RETBAD () ;FAIL
; TABLE OF EVENT CODE PROCESSING ROUTINES
EVTTAB: [RETBAD (.NRIPV)] ; 0 - ILLEGAL
EVTASC ; 1 - ASCII INFORMATION
EVTEXA ; 2 - EXTENDED ASCII INFORMATION
EVTHDW ; 3 - HARDWARE ERROR
EVTSFT ; 4 - SOFTWARE ERROR
EVTTOP ; 5 - TOPOLOGY CHANGE
EVTSIZ==.-EVTTAB
EVTEXA: SAVEPQ
ASUBR <EVAPTR,EVACNT,EVALGD,EVAMSG>
STKVAR <EVATMP,EVABLK>
SETZM P4 ;INITIALIZE "NOT DONE YET" FLAG
; SET UP TO ADD CHK11 TEXT TO SYSERR ENTRY
HRLI T3,(POINT 7,) ;FORM POINTER TO WHERE TEXT WILL GO
MOVEM T3,EVAMSG ;SAVE POINTER TO TEXT
MOVE T1,EVAPTR ;GET POINTER TO NICE MESSAGE
MOVE T2,EVACNT ;GET NUMBER OF BYTES LEFT IN NICE MESSAGE
; LOOP TO ADD EACH MESSAGE-FUL OF TEXT TO SYSERR ENTRY
EVTA05: CALL GETFLD ;GO EXTRACT FIELD FROM EVENT LOGGING MESSAGE
RETBAD () ;FAILED
MOVEM T4,EVABLK ;SAVE EVENT BLOCK ADDRESS
CAIE T3,.EDTXT ;ASCII DATA TYPE CODE ?
JRST EVTA05 ;NO, IGNORE IT - GO GET NEXT FIELD
ILDB T1,T4 ;GET FIRST CHARACTER IN STRING
CAIN T1,0 ;LAST MESSAGE ?
SETOM P4 ;YES, NOTE BY SETTING FLAG
MOVE T1,EVAMSG ;GET DESTINATION POINTER FOR TEXT
MOVEM T1,EVATMP ;SAVE POINTER TO FIRST DATA BYTE
MOVE T2,EVABLK ;GET SOURCE TEXT POINTER
SETZM T3 ;TERMINATE ON NULL
SOUT ;ACCUMULATE TEXT
MOVEM T1,EVAMSG ;SAVE UPDATED DESTINATION POINTER
MOVE T1,EVABLK ;GET BLOCK ADDRESS AGAIN
CALL RELFRE ;RELEASE THE BLOCK
FATAL.ERROR ; Die on release failure
MOVE T1,EVATMP ;GET POINTER TO TEXT MESSAGE
SKIPE P4 ;GOT LAST MESSAGE YET ?
JRST EVTA10 ;YES, GO MAKE SYSERR ENTRY
MOVE T1,REQLNK ;GET LOGICAL LINK FROM REQUESTING TASK
HRRI T2,MSGBLK ;GET ADDRESS OF NICE MESSAGE AREA
HRLI T2,(POINT 8,) ;FORM POINTER TO NICE MESSAGE DESTINATION
MOVNI T3,MSGSIZ*BPWRD ;GET MAX COUNT
SINR ;GET NEXT BLOCK OF TEXT
ERJMP [RETBAD (.NRNCE)] ;FAILED, "NETWORK COMMUNICATIONS ERROR"
MOVEI T2,MSGSIZ*BPWRD(T3) ;GET NUMBER OF BYTES IN MESSAGE
HRRI T1,MSGBLK ;GET ADDRESS OF NICE MESSAGE AREA
HRLI T1,(POINT 8,) ;FORM POINTER TO NICE MESSAGE DESTINATION
JRST EVTA05 ;GO EXTRACT TEXT FROM NEXT MESSAGE
; HERE WHEN ALL ASCII DATA EXTRACTED
EVTA10: MOVX T4,SY%CHK ;CHK11 ENTRY TYPE CODE
STOR T4,SYCOD,(P1) ;STORE ENTRY TYPE CODE IN SYSERR ENTRY
HRRZ T2,EVAMSG ;GET LAST ADDRESS USED IN SYSERR ENTRY
SUB T2,EVALGD ;COMPUTE NUMBER OF WORDS IN LOG DATA SECTION
MOVN T2,T2 ;GET -NUMBER OF WORDS
HRLZ T2,T2 ;GET -COUNT,,0
MOVE T3,EVALGD ;GET LOG DATA STARTING ADDRESS
SUB T3,P2 ;COMPUTE OFFSET TO LOG DATA
HRRI T2,(T3) ;FORM SYSERR POINTER TO LOG DATA SECTION
STOR T2,SYPTR,(P2) ;STORE POINTER TO LOG DATA SECTION
HRRZ T2,EVAMSG ;GET LAST ADDRESS USED IN SYSERR ENTRY
SUB T2,P1 ;COMPUTE SIZE OF ENTIRE ENTRY
STOR T2,SYLEN,(P1) ;STORE LENGTH OF ENTRY
RETSKP ;DONE, RETURN
;EVTTOP - ROUTINE TO HANDLE TOPOLOGY CHANGE LOGGING MESSAGES
EVTTOP: SAVEPQ
STKVAR <ETPNOD,ETPLID,ETPDST,ETPERR,ETPRSN>
MOVEM T3,ETPDST ;SAVE DESTINATION FOR NEXT ITEM IN SYSERR ENTRY
; INITIALIZE VARIABLES
SETZM ETPNOD ;NODE ID
SETZM ETPLID ;LINE ID
SETZM ETPRSN ;REASON CODE
; LOOP OVER EACH FIELD IN THE MESSAGE
ETP010: JUMPE T2,ETP020 ;IF NO MORE FIELDS, GO MAKE SYSERR ENTRY
CALL GETFLD ;GO EXTRACT NEXT FIELD FROM NICE LOG MESSAGE
JRST EVTTPX ;FAILED, RELEASE ANY ASSIGNED RESOURCES
CAIL T3,ETPLEN ;DATA TYPE CODE WITHIN RANGE ?
JRST [ MOVX T1,.NRIMF ;NO, BAD MESSAGE FORMAT
JRST EVTTPX ] ;RETURN ERROR
JRST @ETPTAB(T3) ;STORE ITEM FROM LOG MESSAGE
; (EACH PROCESSING ROUTINE RETURNS TO ETP015)
ETP015: JRST ETP010 ;LOOP BACK FOR NEXT FIELD IN MESSAGE
; TABLE OF ROUTINES TO STORE DATA FOR TOPOLOGY CHANGE ENTRIES
ETPTAB: EVTTPX ; 0 - ILLEGAL
EVTTPX ; 1 - GENERAL DATA
ETP015 ; 2 - TIME OF DAY (NOT USED)
ETP015 ; 3 - DATE (NOT USED)
EVTTPX ; 4 - UPTIME
ESTLID ; 5 - LINE ID
ESTRSN ; 6 - REASON CODE
EVTTPX ; 7 - RECOVERY
EVTTPX ; 8 - OPERATING SYSTEM ID
ESTNOD ; 9 - NODE ID
EVTTPX ; 10 - MICROCODE INFO
EVTTPX ; 11 - LINE PROTOCOL
EVTTPX ; 12 - TRANSMISSION PROTOCOL
ETPLEN==.-ETPTAB
; HERE WHEN ALL FIELDS EXTRACTED FROM MESSAGE
ETP020:
; ADD ADJACENT NODE NAME TO NETWORK HEADER
MOVE T3,ETPDST ;COPY DESTINATION ADDRESS FOR STRING
MOVE T2,ETPNOD ;GET POINTER TO NODE NAME
MOVE T1,P1 ;GET ADDRESS OF SYSERR ENTRY
CALL SYRSTR ;ADD STRING TO ENTRY
JRST EVTTPX ;FAILED
STOR T2,SYADJ,(P2) ;STORE POINTER TO ADJACENT NODE
MOVEM T1,ETPDST ;UPDATE NEXT ADDRESS TO USE IN SYSERR ENTRY
; STORE REASON CODE AND LINE ID
SKIPN T4,ETPRSN ;GET REASON CODE
JRST ETP030 ;NONE SUPPLIED
STOR T4,SYRSN,(P2) ;STORE REASON IN NETWORK HEADER OF SYSERR ENTRY
ETP030: SKIPN T4,ETPLID ;GET ADDRESS OF BLOCK HOLDING LINE ID
JRST ETP040 ;NO LINE ID SUPPLIED
MOVE T3,1(T4) ;GET FIRST WORD OF LINE ID
STOR T3,SYLID,(P2) ;STORE FIRST PART OF LINE ID
MOVE T3,2(T4) ;GET SECOND WORD OF LINE ID
STOR T3,SYLI1,(P2) ;STORE SECOND SECTION OF LINE ID
; HERE WHEN DONE, RELEASE RESOURCES AND RETURN
ETP040: SKIPE T1,ETPNOD ;ANY NODE ID YET ?
JRST [ CALL RELFRE ;YES, RELEASE NODE NAME
FATAL.ERROR ; Die on release failure
JRST .+1 ]
SKIPE T1,ETPLID ;ANY LINE ID YET ?
JRST [ CALL RELFRE ;YES, RELEASE LINE ID
FATAL.ERROR ; Die on release failure
JRST .+1 ]
MOVE T2,ETPDST ;GET NEXT ADDRESS TO USE IN SYSERR ENTRY
SUB T2,P1 ;COMPUTE SIZE OF SYSERR ENTRY
MOVX T1,SY%TOP ;GET TOPOLOGY CHANGE EVENT CODE
RETSKP ;DONE, RETURN SUCCESS
; HERE ON AN ERROR TO RELEASE ANY ASSIGNED RESOURCES
EVTTPX: MOVEM T1,ETPERR ;SAVE ERROR CODE
SKIPE T1,ETPNOD ;ANY NODE ID YET ?
JRST [ CALL RELFRE ;YES, RELEASE NODE NAME
FATAL.ERROR
JRST .+1 ]
SKIPE T1,ETPLID ;ANY LINE ID YET ?
JRST [ CALL RELFRE ;YES, RELEASE LINE ID
FATAL.ERROR
JRST .+1 ]
MOVE T1,ETPERR ;RESTORE ERROR CODE
RETBAD () ;FAIL
; ROUTINES TO STORE INFO USED TO MAKE TOPOLOGY CHANGE SYSERR ENTRIES
ESTRSN: MOVEM T4,ETPRSN ;STORE REASON CODE
JRST ETP015 ;DONE, RETURN
ESTNOD: MOVEM T4,ETPNOD ;STORE POINTER TO NODE NAME
JRST ETP015 ;DONE, RETURN
ESTLID: MOVEM T4,ETPLID ;STORE POINTER TO LINE ID
JRST ETP015 ;DONE, RETURN
;EVTHDW - ROUTINE TO PROCESS HARDWARE EVENT LOG ENTRIES
EVTHDW: SAVEPQ
STKVAR <HDWNOD,HDWDEV,HDWREG,HDWUPT,HDWDAT,HDWRSN,HDWRCV,HDWOPS,HDWERR,HDWMCD,HDWDST,HDWTHR,HDWLXX>
MOVEM T3,HDWDST ;SAVE NEXT ADR TO USE IN SYSERR ENTRY
; INITIALIZE VARIABLES
SETOM HDWTHR ;NO THRESHOLD VALUE YET
SETZM HDWNOD ;NO NODE NAME YET
SETZM HDWDEV ;NO DEVICE YET
SETZM HDWREG ;NO REGISTER DATA YET
SETZM HDWUPT ;NO UPTIME YET
SETZM HDWDAT ;NO DATE YET
SETZM HDWRSN ;NO REASON CODE YET
SETOM HDWRCV ;NO RECOVERY CODE YET
SETZM HDWOPS ;NO OPERATING SYSTEM ID YET
SETZM HDWMCD ;NO MICROCODE ID YET
; LOOP OVER EACH FIELD IN THE MESSAGE
HDW010: JUMPE T2,HDW020 ;IF NO MORE FIELDS, GO MAKE SYSERR ENTRY
CALL GETFLD ;GO EXTRACT NEXT FIELD FROM NICE LOG MESSAGE
JRST EVTHDX ;FAILED, RELEASE ANY ASSIGNED RESOURCES
CAIL T3,HDWLEN ;DATA TYPE CODE WITHIN RANGE ?
JRST [ MOVX T1,.NRIMF ;NO, BAD MESSAGE FORMAT
JRST EVTHDX ] ;RETURN ERROR
JRST @HDWTAB(T3) ;STORE ITEM FROM LOG MESSAGE
; (EACH PROCESSING ROUTINE RETURNS TO HDW015)
HDW015: JRST HDW010 ;LOOP BACK FOR NEXT FIELD IN MESSAGE
; TABLE OF ROUTINES TO STORE DATA FOR HARDWARE ENTRIES
HDWTAB: EVTHDX ; 0 - ILLEGAL
HSTREG ; 1 - REGISTER DATA
HDW015 ; 2 - TIME OF DAY (NOT USED)
HDW015 ; 3 - DATE (NOT USED)
HSTUPT ; 4 - UPTIME
HSTDEV ; 5 - LINE ID
HSTRSN ; 6 - REASON CODE
HDW015 ; 7 - RECOVERY (IGNORED)
HSTOPS ; 8 - OPERATING SYSTEM ID
HSTNOD ; 9 - NODE ID
HSTMCD ; 10 - MICROCODE INFO
EVTHDX ; 11 - LINE PROTOCOL
EVTHDX ; 12 - TRANSMISSION PROTOCOL
HSTTHR ; 13 - THRESHOLD VALUE
HDWLEN==.-HDWTAB
EVTHDX: MOVEM T1,HDWERR ;SAVE ERROR CODE
SKIPE T1,HDWDEV ;ANY DEVICE YET ?
JRST [ CALL RELFRE ;YES, RELEASE SPACE
FATAL.ERROR
JRST .+1 ]
SKIPE T1,HDWREG ;ANY REGISTERS YET ?
JRST [ CALL RELFRE ;YES, RELEASE FREE BLOCK
FATAL.ERROR
JRST .+1]
MOVE T1,HDWERR ;RESTORE ERROR CODE
RETBAD () ;RETURN FAILURE
; HERE WHEN ALL FIELDS EXTRACTED FROM NICE EVENT LOGGING MESSAGE
HDW020: MOVE T1,HDWDEV ;GET ADDRESS OF DEVICE ID
HLRZ T1,1(T1) ;GET DEVICE TYPE CODE
CALL CVTHDW ;CONVERT NICE DEVICE CODE TO SYSERR CODE
JRST EVTHDX ;FAILED
STOR T1,SYHDW,(P2) ;STORE HARDWARE DEVICE TYPE IN ENTRY
; STORE OPERATING SYSTEM AND REASON CODES, AND RECOVERY INFO
MOVE T1,HDWOPS ;GET OPERATING SYSTEM ID CODE
STOR T1,SYOPS,(P2) ;STORE IN SYSERR ENTRY
MOVE T1,HDWRSN ;GET REASON CODE
STOR T1,SYRSN,(P2) ;STORE IN SYSERR ENTRY
MOVE T1,HDWTHR ;GET THRESHOLD VALUE PROVIDED IN MESSAGE
STOR T1,SYTHR,(P2) ;STORE IN SYSERR ENTRY
MOVE T1,HDWRCV ;GET RECOVERY ACTION CODE
STOR T1,SYRCV,(P2) ;STORE IN SYSERR ENTRY
; STORE THE CONTROLLER AND UNIT NUMBER
MOVE T1,HDWDEV ;GET ADR OF BLOCK HOLDING DEVICE ID
CALL FNDCTL ;GO FIND CONTROLLER AND LINE NUMBERS
JRST EVTHDX ;FAILED
STOR T1,SYLID,(P2) ;STORE CONTROLLER/LINE NUMBERS IN ENTRY
STOR T2,SYLI1,(P2) ; AND STORE STATION NUMBER
; STORE THE REGISTER DATA IN THE SYSERR ENTRY
MOVE T1,HDWDEV ;GET ADR OF BLOCK HOLDING DEVICE ID
HRL T1,HDWDST ;GET NEXT ADR TO USE IN SYSERR ENTRY
MOVE T2,HDWREG ;GET ADR OF BLOCK HOLDING REGISTER DATA
MOVEI T3,.SYPTR(P2) ;GET ADDRESS TO USE IN SYSERR ENTRY
MOVE T4,HDWMCD ;GET MICROCODE INFO IN CASE APPLICABLE
CALL STOREG ;STORE REGISTER DATA IN SYSERR ENTRY
JRST EVTHDX ;FAILED
MOVEM T1,T4 ;SAVE NEXT SYSERR ADDRESS TO USE
; ADD LOG DATA POINTER AND EVENT CODE TO ENTRY, THEN RETURN
HRRZ T2,HDWDST ;GET STARTING ADR FOR LOG DATA SECTION
SUB T1,T2 ;COMPUTE NUMBER OF WORDS IN LOG DATA SECTION
MOVE T3,T1 ;COPY COUNT OF WORDS IN LOG DATA SECTION
IMULI T3,BPWRD ;COMPUTE BYTES IN LOG DATA SECTION
STOR T3,SYNCT,(P2) ;STORE BYTE COUNT IN NETWORK HEADER
MOVN T1,T1 ;COMPUTE -COUNT
HRL T1,T1 ;GET -COUNT,,0
SUB T2,P2 ;COMPUTE OFFSET TO START OF LOG DATA
HRR T1,T2 ;FORM SYSERR POINTER TO LOG DATA
STOR T1,SYPTR,(P2) ;STORE SYSERR POINTER TO LOG DATA
MOVX T3,SY%MLG ;HARDWARE LOG ENTRY EVENT CODE
STOR T3,SYCOD,(P1) ;STORE ENTRY TYPE CODE IN SYSERR ENTRY
MOVE T2,T4 ;COPY NEXT DESTINATION ADR IN SYSERR ENTRY
SUBI T2,(P1) ;COMPUTE # OF BYTES IN SYSERR ENTRY
MOVEM T2,HDWLXX ;Save length so chunks can be released
SKIPE T1,HDWDEV ;ANY DEVICE YET ?
JRST [ CALL RELFRE ;YES, RELEASE SPACE
FATAL.ERROR
JRST .+1 ]
SKIPE T1,HDWREG ;ANY REGISTERS YET ?
JRST [ CALL RELFRE ;YES, RELEASE FREE BLOCK
FATAL.ERROR
JRST .+1]
MOVE T2,HDWLXX ;Restore length of SYSERR entry
MOVX T1,SY%MLG ;GET SYSERR EVENT CODE TYPE
RETSKP ;DONE, RETURN TO CALLER
;STOREG - ROUTINE TO STORE DEVICE REGISTER IN SYSERR ENTRY
;
;ACCEPTS IN T1/ NEXT ADR TO USE IN SYSERR ENTRY,,ADR OF DEVICE ID BLOCK
; T2/ ADDRESS OF BLOCK HOLDING REGISTERS
; T3/ NEXT ADDRESS TO STORE INTO IN SYSERR ENTRY
; T4/ MICROCODE INFO (NOT APPLICABLE TO ALL DEVICES)
; CALL STOREG
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ NEXT ADR TO STORE INTO IN ENTRY
STOREG: ASUBR <SRGDEV,SRGREG,SRGDST,SRGMCD>
HLRZM T1,SRGDST ;SAVE NEXT ADR TO USE IN SYSERR ENTRY
MOVEI T1,1(T1) ;POINT PAST BLOCK HEADER TO DEVICE ID
HLRZ T1,(T1) ;GET DEVICE TYPE CODE
MOVEI T2,REGTAB ;GET TABLE ADDRESS
MOVEI T3,REGLEN ;GET TABLE LENGTH
CALL FNDDSP ;GET PROCESSING ROUTINE ADDRESS
RETBAD () ;FAILED
MOVE T4,T1 ;SAVE PROCESSING ROUTINE ADDRESS
MOVE T1,SRGREG ;GET ADR OF BLOCK HOLDING REGISTERS
MOVE T2,SRGDST ;GET NEXT DESTINATION TO USE IN ENTRY
HRLI T2,(POINT 8,) ;FORM POINTER TO WHERE REGISTERS WILL GO
MOVE T3,SRGMCD ;GET MICROCODE INFO
CALL (T4) ;ADD REGISTERS TO SYSERR ENTRY
RETBAD () ;FAIL
RETSKP ;DONE, RETURN SUCCESS
; TABLE OF PROCESSING ROUTINES TO STORE REGISTER DATA IN SYSERR ENTRY
REGTAB: .DTDTE,,STODTE
.DTDUP,,STODUP
.DTKDP,,STOKDP
.DTKDZ,,STOKDZ
.DTDMC,,STODMC
REGLEN==.-REGTAB
; ROUTINES TO STORE REGISTER DATA IN SYSERR ENTRY
STOKDZ:
STOKDP: ASUBR <SKDREG,SKDDST,SKDMCD,SKDCNT>
MOVE T1,SKDDST ;GET DESTINATION POINTER
ADDI T1,1 ;SKIP FIRST WORD (PTR TO SUB-DEVICE DATA)
MOVE T2,SKDREG ;GET ADR OF BLOCK HOLDING REGISTERS
ADDI T2,2 ;GET ADDRESS OF REGISTER DATA
HRLI T2,(POINT 8,) ;FORM POINTER TO REGISTER DATA
MOVNI T3,NKMCRG ;GET NUMBER OF KMC11 REGISTER DATA BYTES
SOUT ;ADD KMC REGISTER DATA TO ENTRY
ERJMP [RETBAD (.NRNPE)] ;FAILED
; STORE POINTER TO DUP11 REGISTER DATA ("SUB-DEVICE TABLE")
MOVE T1,SKDDST ;GET POINTER TO ORIGINAL DESTINATION
MOVE T4,SKDREG ;GET ADR OF BLOCK HOLDING REGISTER DATA
MOVE T3,1(T4) ;GET NUMBER OF BYTES OF REGISTER DATA
SUBI T3,NKMCRG ;COMPUTE NUMBER OF DUP11 REGISTER BYTES LEFT
MOVN T3,T3 ;GET -NUMBER OF DUP BYTES
MOVEM T3,SKDCNT ;SAVE -NUMBER OF DUP REGISTER BYTES
JUMPE T3,STKDP2 ;SKIP STORING DUP DATA IF NONE
MOVEI T3,6(T1) ;GET ADDRESS OF DUP REGISTER DATA
SUB T3,P2 ;COMPUTE OFFSET TO DUP DATA
HRL T3,SKDCNT ;GET -NUMBER OF DUP BYTES,,OFFSET
MOVEM T3,(T1) ;STORE POINTER TO "SUB-DEVICE TABLE"
STKDP2: MOVE T4,SKDMCD ;GET MICROCODE INFO
MOVEM T4,3(T1) ;STORE IN SYSERR ENTRY
; STORE DUP11 REGISTER DATA
MOVEI T1,6(T1) ;GET DESTINATION ADR FOR REGISTER DATA
HRLI T1,(POINT 8,) ;FORM DESTINATION POINTER
MOVE T3,SKDCNT ;GET NUMBER OF DUP11 REGISTER BYTES
JUMPE T3,STKDP4 ;SKIP STORE IF NO BYTES
SOUT ;ADD DUP REGISTERS TO SYSERR ENTRY
ERJMP [RETBAD (.NRNPE)] ;FAILED
STKDP4: IBP T1 ;INCREMENT POINTER TO NEXT BYTE TO USE IN ENTRY
HRRZ T1,T1 ;KEEP JUST ADDRESS
RETSKP ;DONE, RETURN SUCCESS
STODMC: ASUBR <SDMREG,SDMDST>
MOVE T2,SDMREG ;GET ADR OF BLOCK HOLDING REGISTERS
MOVN T3,1(T2) ;GET NUMBER OF BYTES OF REGISTER DATA
ADDI T2,2 ;GET ADDRESS OF REGISTER DATA
HRLI T2,(POINT 8,) ;FORM POINTER TO REGISTER DATA
MOVE T1,SDMDST ;GET DESTINATION POINTER
SETOM (T1) ;-1 instead of pointer to sub-device data
AOS T1 ;Move past dummy sub-device data pointer
SOUT ;COPY THE REGISTERS INTO SYSERR ENTRY
ERJMP [RETBAD (.NRNPE)] ;FAILED
IBP T1 ;INCREMENT POINTER TO NEXT BYTE TO USE
HRRZ T1,T1 ;KEEP JUST ADDRESS
RETSKP ;DONE, RETURN NEXT SYSERR ENTRY ADDRESS TO USE
STODTE: ASUBR <DTSREG,DTSDST>
MOVE T2,DTSREG ;GET ADR OF BLOCK HOLDING REGISTERS
MOVN T3,1(T2) ;GET NUMBER OF BYTES OF REGISTER DATA
ADDI T2,2 ;GET ADDRESS OF REGISTER DATA
HRLI T2,(POINT 8,) ;FORM POINTER TO REGISTER DATA
MOVE T1,DTSDST ;GET DESTINATION POINTER
SOUT ;COPY THE REGISTERS INTO SYSERR ENTRY
ERJMP [RETBAD (.NRNPE)] ;FAILED
IBP T1 ;INCREMENT POINTER TO NEXT BYTE TO USE
RETSKP ;DONE, RETURN NEXT SYSERR ENTRY ADDRESS TO USE
STODUP: ASUBR <DTUREG,DTUDST>
MOVE T2,DTUREG ;GET ADR OF BLOCK HOLDING REGISTERS
MOVN T3,1(T2) ;GET -NUMBER OF BYTES OF REGISTER DATA
ADDI T2,2 ;GET ADDRESS OF REGISTER DATA
HRLI T2,(POINT 8,) ;FORM POINTER TO REGISTER DATA
MOVE T1,DTUDST ;GET DESTINATION POINTER
SOUT ;COPY THE REGISTERS INTO SYSERR ENTRY
ERJMP [RETBAD (.NRNPE)] ;FAILED
IBP T1 ;INCREMENT POINTER TO NEXT BYTE TO USE
HRRZ T1,T1 ;KEEP JUST ADDRESS
RETSKP ;DONE, RETURN NEXT SYSERR ENTRY ADDRESS TO USE
;FNDCTL - ROUTINE TO FIND THE CONTROLLER AND LINE NUMBERS IN THE
; DEVICE ID SENT IN THE NICE EVENT LOGGING MESSAGE
;
;ACCEPTS IN T1/ ADDRESS OF BLOCK CONTAINING LINE ID
; CALL FNDCTL
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ CONTROLLER #,,LINE #
FNDCTL: MOVEI T4,1(T1) ;GET ADDRESS OF DEVICE ID
HRL T1,(T4) ;GET CONTROLLER NUMBER
HLR T1,1(T4) ;AND GET UNIT NUMBER
HRR T2,1(T4) ;GET STATION ID
HRLI T2,-1 ;AND DO NOT USE RESERVED BITS
RETSKP ;DONE
;CVTHDW - ROUTINE TO CONVERT NICE DEVICE CODE TO SYSERR DEVICE CODE
;
;ACCEPTS IN T1/ NICE DEVICE TYPE CODE (.DTXXX) FROM EVENT LOGGING MSG
; CALL CVTHDW
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ SYSERR DEVICE CODE
CVTHDW: MOVX T2,HTPTAB ;GET TABLE ADDRESS
MOVX T3,HTPLEN ;GET TABLE LENGTH
CALL FNDDSP ;FIND CORRESPONDING SYSERR CODE
RETBAD (.NRIPV) ;FAIL, INVALID PARAMETER VALUE
RETSKP ;DONE, RETURN SUCCESS
; CONVERSION TABLE FOR NICE PROTOCOL TO SYSERR HARDWARE DEVICE TYPE CODES
HTPTAB: .DTDMC,,.SYDMC
.DTDTE,,.SYDTE
.DTDUP,,.SYDUP
.DTKDP,,.SYKDP
.DTKDZ,,.SYKDZ
HTPLEN==.-HTPTAB
; ROUTINES TO STORE ITEMS FROM HARDWARE EVENT LOGGING MESSAGE
HSTDEV: MOVEM T4,HDWDEV ;STORE ADDRESS OF LINE ID
JRST HDW015 ;DONE, RETURN
HSTREG: MOVEM T4,HDWREG ;SAVE ADDRESS OF BLOCK HOLDING REG DATA
JRST HDW015 ;RETURN TO MESSAGE PARSER
HSTUPT: MOVEM T4,HDWUPT ;SAVE UPTIME
JRST HDW015 ;RETURN TO MESSAGE PARSER
HSTRSN: MOVEM T4,HDWRSN ;SAVE REASON CODE
JRST HDW015 ;RETURN TO MESSAGE PARSER
HSTRCV: MOVEM T4,HDWRCV ;SAVE RECOVERY CODE
JRST HDW015 ;RETURN TO MESSAGE PARSER
HSTOPS: MOVEM T4,HDWOPS ;SAVE OPERATING SYSTEM ID CODE
JRST HDW015 ;RETURN TO MESSAGE PARSER
HSTMCD: MOVEM T4,HDWMCD ;SAVE MICROCODE ID
JRST HDW015 ;RETURN TO MESSAGE PARSER
HSTNOD: MOVEM T4,HDWNOD ;SAVE ADR OF BLOCK HOLDING NODE NAME
JRST HDW015 ;RETURN TO MESSAGE PARSER
HSTTHR: MOVEM T4,HDWTHR ;SAVE THRESHOLD VALUE
JRST HDW015 ;RETURN TO MESSAGE PARSER
;EVTSYR - ROUTINE TO MAKE A SYSERR HEADER FOR EVENT LOGGING ENTRIES
;
;ACCEPTS IN T1/ BASE ADDRESS OF SYSERR ENTRY
; T2/ ASCIZ SOURCE NODE NAME STRING
; T3/ SEQUENCE NUMBER
; CALL EVTSYR
;RETURNS: +1 FAILED
; +2 SUCCESS, WITH T1/ ADDRESS OF NEXT WORD TO USE IN SYSERR ENTRY
EVTSYR: SAVEPQ ;SAVE SOME AC'S
STKVAR <ESRSRC,ESRSEQ>
MOVEM T2,ESRSRC ;SAVE POINTER TO SOURCE NODE
MOVEM T3,ESRSEQ ;SAVE SEQUENCE NUMBER
; INITIALIZE HEADER TO ALL "UNKNOWN"
MOVE P1,T1 ;GET BASE ADDRESS OF SYSERR ENTRY
MOVEI P2,.SYDAT(P1) ;GET ADDRESS OF START OF NETWORK DATA HEADER
SETOM (P2) ;INITIALIZE FIRST WORD TO "UNKNOWN"
HRLZ T1,P2 ;START AT NETWORK DATA HEADER
HRRI T1,1(P2) ;DESTINATION IS NEXT WORD
BLT T1,.SYPTR-1(P2) ;INITIALIZE ENTIRE NETWORK DATA HEADER
; SET UP SEQUENCE NUMBER
MOVE T1,ESRSEQ ;GET SEQUENCE NUMBER
STOR T1,SYSEQ,(P2) ;STORE IN NETWORK HEADER OF SYSERR ENTRY
; ADD TRANSMITTING NODE NAME
MOVE T1,P1 ;GET BASE ADDRESS OF SYSERR ENTRY
MOVE T2,ESRSRC ;GET POINTER TO SOURCE NODE NAME
MOVEI T3,.SYPTR+1(P2) ;START AT FIRST ADDRESS AFTER NET DATA HEADER
CALL SYRSTR ;ADD STRING TO SYSERR ENTRY
RETBAD () ;FAILED
STOR T2,SYNOD,(P2) ;STORE POINTER TO TRANSMITTING NODE NAME
; ADD DESTINATION NODE NAME
MOVE T3,T1 ;GET NEXT ADR TO USE IN SYSERR ENTRY
MOVE T2,[POINT 7,OURNAM] ;GET PTR TO OUR NAME (WE ARE DESTINATION)
MOVE T1,P1 ;GET BASE ADDRESS OF SYSERR ENTRY
CALL SYRSTR ;STORE STRING IN SYSERR ENTRY
RETBAD () ;FAILED
STOR T2,SYDST,(P2) ;STORE POINTER TO DESTINATION NODE NAME
; DONE. T1 STILL HAS NEXT WORD TO USE IN SYSERR ENTRY FROM SYRSTR CALL
RETSKP ;RETURN SUCCESS
EVTASC: RETBAD (.NRIPV)
EVTSFT: RETBAD (.NRIPV) ;FAIL
SUBTTL Routines to Default Information from the Configuration Database
;DEFRQL - ROUTINE TO FILL IN DEFAULTS IN DOWN LINE LOAD REQUESTS
;
;CALL: CALL DEFRQL
;RETURNS: +1 FAILED, COULD NOT SUPPLY ALL DEFAULTS
; +2 SUCCESS, VARIABLES DESCRIBED UNDER GETRQL ROUTINE ALL SET UP
DEFRQL:
; DEFAULT TARGET NODE TO LOAD IF NOT SPECIFIED IN MESSAGE
MOVE T4,RQLOPT ;GET OPTION BITS
LOAD T4,LO%TGT,T4 ;GET JUST TARGET SPECIFICATION OPTION
CAIE T4,.LOSRV ;TARGET TO BE DETERMINED BY SERVER AND LINE ?
JRST DRQ010 ;NO, TARGET NODE WAS INCLUDED IN MESSAGE
MOVE T1,RQLSRV ;YES, GET POINTER TO NAME OF SERVER NODE
CALL GETNIB ;GET ADDRESS OF NIB FOR SERVER NODE
RETBAD (.NRICF) ;FAILED, RETURN "INVALID CONFIGURATION FILE"
LOAD T1,NDLIN,(T1) ;GET ADDRESS OF SERVER NODE'S LINE TABLE
DMOVE T2,RQLLIN ;GET SERVER NODE LINE ID
CALL FNDTGT ;GO FIND THE TARGET NODE AT THE END OF THE LINE
RETBAD (.NRICF) ;FAILED, RETURN "INVALID CONFIGURATION FILE"
LOAD T1,NDNAM,(T1) ;GET POINTER TO NAME OF TARGET NODE
MOVEM T1,RQLTGT ;SAVE POINTER TO ASCIZ TARGET NODE NAME
; DEFAULT THE BOOTSTRAP PASSWORD IF NEEDED AND NOT SPECIFIED IN MESSAGE
DRQ010: MOVE T4,RQLOPT ;GET OPTIONS FROM MESSAGE
LOAD T3,LO%ROM,T4 ;GET BOOTSTRAP SPECIFICATION FIELD
CAIN T3,.LOTBD ;TRIGGER BOOT AND DEFAULT BOOT PASSWORD ?
JRST [ MOVE T1,RQLTGT ;GET POINTER TO ASCIZ NAME OF TARGET NODE
CALL DEFBPW ;YES, GO FILL IN DEFAULT FROM DATABASE
RETBAD () ;FAILED, BAD CONFIGURATION FILE
DMOVEM T3,RQLPSW ;SAVE DEFAULT BOOT PASSWORD
JRST .+1 ] ;CONTINUE IN MAINLINE CODE
; HERE TO DEFAULT THE INPUT (PRIMARY) LOAD FILE IF NOT SUPPLIED
MOVE T1,RQLOPT ;GET OPTIONS FROM NICE MESSAGE
TXNE T1,LO%OPS ;OPERATING SYSTEM FILE INCLUDED IN MESSAGE ?
JRST DRQ020 ;YES, GO CHECK SERVER NODE AND SERVER LINE
MOVE T1,RQLTGT ;GET POINTER TO ASCIZ TARGET NODE NAME
CALL GETNIB ;GET ADR OF NODE INFORMATION BLOCK FOR TARGET
RETBAD (.NRICF) ;FAILED, RETURN "INVALID CONFIGURATION FILE"
LOAD T1,NDLOD,(T1) ;GET POINTER TO PRIMARY LOAD FILE
JUMPE T1,[RETBAD (.NRICF)] ;IF NO FILE IN DATABASE, RETURN ERROR
MOVEM T1,RQLOPS ;SAVE POINTER TO OPERATING SYSTEM FILE SPEC
; ..
; ..
; HERE TO DEFAULT SERVER NODE AND SERVER LINE IF NOT IN NICE MESSAGE
DRQ020: MOVE T1,RQLOPT ;GET OPTIONS FROM NICE MESSAGE
LOAD T4,LO%TGT,T4 ;GET TARGET SPECIFICATION OPTION
CAIE T4,.LOTGT ;TARGET SPECIFIED BY NAME & SERVER DEFAULTED ?
JRST DRQ030 ;NO, SERVER WAS INCLUDED IN MESSAGE
MOVE T1,RQLTGT ;YES, GET POINTER TO ASCIZ TARGET NODE NAME
CALL GETNIB ;GET ADDRESS OF NODE INFORMATION BLOCK
RETBAD (.NRICF) ;FAILED, RETURN "INVALID CONFIGURATION FILE"
LOAD T2,NDSRV,(T1) ;GET POINTER TO DEFAULT SERVER FOR TARGET NODE
JUMPE T2,[RETBAD (.NRICF)] ;IF NO SERVER KNOWN, RETURN ERROR
MOVEM T2,RQLSRV ;SAVE POINTER TO ASCIZ SERVER NODE NAME
LOAD T2,NDSL1,(T1) ;GET FIRST PART OF SERVER LINE ID
LOAD T3,NDSL2,(T1) ;GET SECOND HALF OF SERVER LINE ID
DMOVEM T2,RQLLIN ;SAVE SERVER LINE ID
; HERE TO DEFAULT THE PROGRAM REQUEST DATA IF NOT SPECIFIED IN MESSAGE
DRQ030: MOVE T4,RQLOPT ;GET OPTIONS FROM MESSAGE
LOAD T3,LO%ROM,T4 ;GET ROM FIELD
CAIE T3,.LODEF ;DEFAULT THE PROGRAM REQUEST ?
JRST DRQ040 ;NO, GO ON
MOVE T1,RQLTGT ;YES, GET POINTER TO ASCIZ TARGET NODE NAME
CALL DEFPGM ;GO FILL IN DEFAULT PROGRAM REQUEST DATA
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVEM T4,RQLSID ;SAVE SOFTWARE ID
MOVEM T3,RQLPGM ;SAVE PROGRAM TYPE REQUESTED
MOVEM T2,RQLCPU ;SAVE CPU TYPE OF TARGET NODE
MOVEM T1,RQLLDV ;SAVE LOAD DEVICE AT TARGET NODE
; DEFAULT THE SYSTEM PARAMETERS TO BE PASSED TO THE TARGET NODE IF NEEDED
DRQ040: MOVE T4,RQLOPT ;GET OPTIONS FROM DOWN-LINE LOAD REQUEST MESSAGE
TXNE T4,LO%PAR ;PARAMETERS SPECIFIED IN THE MESSAGE ?
JRST DRQ050 ;YES, GO ON...
MOVE T1,RQLTGT ;GET POINTER TO ASCIZ TARGET NODE NAME
CALL DEFPAR ;GO DEFAULT THE SYSTEM PARAMETERS
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVEM T2,RQLNAM ;SAVE NAME TARGET NODE IS TO USE
MOVEM T3,RQLNUM ;SAVE NUMBER OF TARGET NODE
MOVEM T4,RQLHST ;SAVE HOST FOR TASK LOADS
DRQ050: RETSKP ;DONE, RETURN SUCCESS
;DEFRQD - ROUTINE TO DEFAULT DUMP INFORMATION FROM CONFIGURATION DATABASE
;
;CALL: CALL DEFRQD
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, VARIABLES DESCRIBED UNDER GETRQD ROUTINE ALL SET UP
; DEFAULT TARGET NODE TO BE DUMPED IF NOT INCLUDED IN DUMP REQUEST MESSAGE
DEFRQD: MOVE T4,RQDOPT ;GET OPTIONS FOR DUMP OPERATION
LOAD T4,DO%TGT,T4 ;GET TARGET ID OPTION FIELD
CAIE T4,.DOSRV ;TARGET TO BE DETERMINED FROM SERVER & LINE ?
JRST DFD010 ;NO, GO SEE IF SERVER NEEDS TO BE DEFAULTED
MOVE T1,RQDSRV ;YES, GET POINTER TO ASCIZ NAME OF SERVER NODE
CALL GETNIB ;GET NODE INFORMATION BLOCK FOR SERVER
RETBAD (.NRICF) ;FAILED, RETURN "INVALID CONFIGURATION FILE"
LOAD T1,NDLIN,(T1) ;GET ADDRESS OF LINE ADJACENCY TABLE
DMOVE T2,RQDLIN ;GET SERVER LINE ID (2 WORDS)
CALL FNDTGT ;GO DETERMINE TARGET NODE FOR THIS SERVER & LINE
RETBAD (.NRICF) ;FAILED, RETURN "INVALID CONFIGURATION FILE"
LOAD T1,NDNAM,(T1) ;GET POINTER TO NAME OF TARGET NODE
MOVEM T1,RQDTGT ;SAVE POINTER TO ASCIZ TARGET NODE NAME
; DEFAULT SERVER NODE AND SERVER LINE IF NOT SPECIFIED IN DUMP REQUEST MESSAGE
DFD010: MOVE T4,RQDOPT ;GET OPTIONS FROM NICE MESSAGE
LOAD T4,DO%TGT,T4 ;GET TARGET SPECIFICATION OPTION
CAIE T4,.DOTGT ;TARGET SPECIFIED BY NAME & SERVER DEFAULTED ?
JRST DFD020 ;NO, SERVER WAS INCLUDED IN MESSAGE
MOVE T1,RQDTGT ;YES, GET POINTER TO ASCIZ TARGET NODE NAME
CALL GETNIB ;GET ADDRESS OF NODE INFORMATION BLOCK
RETBAD (.NRICF) ;FAILED, RETURN "INVALID CONFIGURATION FILE"
LOAD T2,NDSRV,(T1) ;GET POINTER TO DEFAULT SERVER FOR TARGET NODE
JUMPE T2,[RETBAD (.NRICF)] ;IF NO SERVER KNOWN, RETURN ERROR
MOVEM T2,RQDSRV ;SAVE POINTER TO ASCIZ SERVER NODE NAME
LOAD T2,NDSL1,(T1) ;GET FIRST PART OF SERVER LINE ID
LOAD T3,NDSL2,(T1) ;GET SECOND HALF OF SERVER LINE ID
DMOVEM T2,RQDLIN ;SAVE SERVER LINE ID
; HERE TO DEFAULT THE DUMP FILESPEC IF NOT SPECIFIED IN DUMP REQUEST MESSAGE
DFD020: MOVE T1,RQDOPT ;GET OPTIONS FROM NICE MESSAGE
TXNE T1,DO%FIL ;DUMP FILE INCLUDED IN MESSAGE ?
JRST DFD030 ;YES, GO CHECK ADDRESS AND COUNT
MOVE T1,RQDTGT ;GET POINTER TO ASCIZ TARGET NODE NAME
CALL GETNIB ;GET ADR OF NODE INFORMATION BLOCK FOR TARGET
RETBAD (.NRICF) ;FAILED, RETURN "INVALID CONFIGURATION FILE"
LOAD T1,NDDMP,(T1) ;GET POINTER TO PRIMARY DUMP FILE
JUMPE T1,[RETBAD (.NRICF)] ;IF NO FILE IN DATABASE, RETURN ERROR
MOVEM T1,RQDFIL ;SAVE POINTER TO DUMP FILE SPEC
; ..
; ..
; HERE TO DEFAULT ADDRESS AND COUNT IF NOT INCLUDED IN THE MESSAGE
DFD030: MOVE T4,RQDOPT ;GET OPTIONS
TXNE T4,DO%ADR ;ADDRESS AND COUNT INCLUDED IN MESSAGE ?
JRST DFD040 ;YES, DO NOT DEFAULT THEM
; ASSUME DUMPS BEGIN AT 0 AND 128K IS TO BE DUMPED
MOVX T1,0 ;GET STARTING ADDRESS FOR DUMP
MOVEM T1,RQDADR ;SAVE STARTING ADDRESS
MOVX T1,DEFCNT ;GET NUMBER OF LOCATIONS TO DUMP
MOVEM T1,RQDCNT ;SAVE COUNT OF LOCATIONS TO DUMP
DFD040: RETSKP ;RETURN TO CALLER
;DEFBPW - ROUTINE TO DEFAULT THE BOOT PASSWORD TO TRIGGER A ROM BOOTSTRAP
;
;ACCEPTS IN T1/ POINTER TO ASCIZ TARGET NODE NAME
; CALL DEFBPW
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T3-T4/ BOOT PASSWORD
DEFBPW: CALL GETNIB ;GET ADDRESS OF NODE INFORMATION BLOCK OF TARGET
RETBAD (.NRICF) ;FAILED, RETURN "INVALID CONFIGURATION FILE"
LOAD T3,NDBP1,(T1) ;LOAD FIRST PART OF BOOT PASSWORD
LOAD T4,NDBP2,(T1) ;LOAD SECOND PART OF BOOT PASSWORD
RETSKP ;DONE, RETURN SUCCESS
;DEFPGM - ROUTINE TO DEFAULT THE PROGRAM REQUEST DATA
;
;ACCEPTS IN T1/ POINTER TO ASCIZ TARGET NODE NAME
; CALL DEFPGM
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ BOOT LOAD DEVICE AT TARGET NODE (.DTXXX)
; T2/ CPU TYPE OF TARGET NODE (.CPXXX)
; T3/ PROGRAM TYPE REQUESTED (.PTXXX)
; T4/ POINTER TO SOFTWARE ID REQUESTED
DEFPGM: CALL GETNIB ;GO GET NODE INFORMATION BLOCK ADDRESS OF TARGET
RETBAD (.NRICF) ;FAILED, RETURN "INVALID CONFIGURATION FILE"
MOVE T4,[POINT 7,[.CHNUL]] ;SOFTWARE ID DEFAULTS TO NULL
MOVX T3,.PTSLD ;DEFAULT PROGRAM TYE IS SECONDARY LOADER
LOAD T2,NDCPU,(T1) ;GET CPU TYPE OF TARGET NODE
LOAD T1,NDLDV,(T1) ;GET LOAD DEVICE TYPE AT TARGET NODE
RETSKP ;DONE, RETURN
;DEFPAR - ROUTINE TO DEFAULT THE SYSTEM PARAMETERS FOR A DOWN-LINE LOAD
;
;ACCEPTS IN T1/ POINTER TO ASCIZ NAME OF TARGET NODE
; CALL DEFPAR
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T2/ NAME TARGET NODE IS TO USE ON INIT
; T3/ NUMBER TARGET NODE IS TO USE
; T4/ HOST TARGET IS TO USE FOR TASK LOADS
DEFPAR: CALL GETNIB ;GO GET THE NODE INFORMATION BLOCK FOR TARGET
RETBAD (.NRICF) ;FAILED, RETURN "INVALID CONFIGURATION FILE"
LOAD T2,NDPNA,(T1) ;GET NAME TARGET NODE IS TO USE
LOAD T3,NDPNU,(T1) ;GET NUMBER TARGET NODE IS TO USE
LOAD T4,NDPHT,(T1) ;GET HOST TARGET IS TO USE FOR TASK LOADS
RETSKP ;DONE, RETURN
SUBTTL Routines to Extract Fields from NICE Messages
;GETRQL - ROUTINE TO EXTRACT THE FIELDS FROM A NICE REQUEST DOWN-LINE LOAD MSG
;
;ACCEPTS IN T1/ POINTER TO START OF NICE MESSAGE
; T2/ NUMBER OF BYTES IN THE MESSAGE
; CALL GETRQL
;RETURNS: +1 FAILED, INVALID MESSAGE FORMAT
; +2 SUCCESS, WITH THE FOLLOWING VARIABLES SET UP IF THE
; ASSOCIATED FIELD IS PRESENT IN THE MESSAGE:
;
; RQLTGT/ POINTER TO ASCIZ NAME OF TARGET NODE
; RQLSRV/ POINTER TO ASCIZ NAME OF SERVER NODE
; RQLLIN/ SERVER LINE ID (2 WORDS)
; RQLPSW/ BOOT PASSWORD TO TRIGGER TARGET'S BOOTSTRAP ROM
; RQLLDV/ BOOT LINE DEVICE TYPE AT TARGET NODE
; RQLCPU/ CPU TYPE OF TARGET SYSTEM (.CPXXX)
; RQLPGM/ PROGRAM TYPE BEING REQUESTED (.PTXXX)
; RQLSID/ SOFTWARE ID
; RQLOPS/ POINTER TO ASCIZ OPERATING SYSTEM FILE SPEC
; RQLNAM/ POINTER TO ASCIZ NAME TARGET NODE IS TO USE
; RQLNUM/ NUMBER OF TARGET NODE
; RQLHST/ POINTER TO ASCIZ NAME OF HOST FOR TASK LOADS
GETRQL:
; SKIP OVER NICE FUNCTION CODE AND GET OPTIONS FROM NICE MESSAGE
CALL GETFCN ;GET FUNCTION CODE FROM NICE MESSAGE
RETBAD (.NRIMF) ;FAILED, RETURN "INVALID MESSAGE FORMAT"
CALL GETEXB ;OPTION FIELD IS EXTENSIBLE BINARY
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVEM T4,RQLOPT ;SAVE OPTIONS
; GET NAME OF TARGET NODE IF INCLUDED IN MESSAGE
MOVE T3,RQLOPT ;GET OPTIONS
LOAD T4,LO%TGT,T3 ;GET TARGET SPECIFICATION OPTION
CAIE T4,.LOTGT ;TARGET NODE SPECIFIED BY NAME ?
CAIN T4,.LOPTH ; OR EVEN WITH A PATH SPECIFIED ?
JRST [ CALL GETNOD ;YES, GO GET THE TARGET NODE FROM THE MESSAGE
RETBAD (.NRIMF) ;FAILED, RETURN "INVALID MESSAGE FORMAT"
MOVEM T3,RQLTGT ;SAVE POINTER TO ASCIZ NAME OF TARGET NODE
JRST .+1] ;RETURN TO MAINLINE CODE
; ..
; ..
; GET NAME OF SERVER NODE AND SERVER LINE ID IF SPECIFIED IN MESSAGE
MOVE T3,RQLOPT ;GET OPTIONS
LOAD T4,LO%TGT,T3 ;GET TARGET SPECIFICATION OPTION
CAIE T4,.LOPTH ;TARGET NODE SPECIFIED BY PATH ?
CAIN T4,.LOSRV ; OR SERVER NODE SPECIFIED EXPLICITLY ?
JRST [ CALL GETNOD ;YES, GO GET THE TARGET NODE FROM THE MESSAGE
RETBAD (.NRIMF) ;FAILED, RETURN "INVALID MESSAGE FORMAT"
MOVEM T3,RQLSRV ;SAVE POINTER TO ASCIZ NAME OF SERVER NODE
CALL GETLIN ;GET SERVER LINE IDENTIFICATION
RETBAD (.NRIMF) ;FAILED, RETURN "INVALID MESSAGE FORMAT"
DMOVEM T3,RQLLIN ;SAVE SERVER LINE ID (2 WORDS)
JRST .+1] ;RETURN TO MAINLINE CODE
; GET TARGET NODE BOOT PASSWORD IF INCLUDED IN NICE MESSAGE
MOVE T3,RQLOPT ;GET OPTIONS
LOAD T4,LO%ROM,T3 ;GET BOOTSTRAP ROM OPTIONS
CAIN T4,.LOTBP ;BOOT PASSWORD INCLUDED IN MESSAGE ?
JRST [ CALL GETBPW ;YES, GO GET BOOT PASSWORD FROM NICE MESSAGE
RETBAD (.NRIMF) ;FAILED, RETURN "INVALID MESSAGE FORMAT"
DMOVEM T3,RQLPSW ;SAVE BOOT PASSWORD
JRST .+1 ] ;RETURN TO MAINLINE CODE
; GET PROGRAM DATA IF INCLUDED IN NICE MESSAGE
MOVE T3,RQLOPT ;GET OPTIONS
LOAD T4,LO%ROM,T3 ;GET ROM BOOTSTRAP OPTION FIELD
CAIN T4,.LOPGM ;PROGRAM DATA INCLUDED IN NICE MESSAGE ?
JRST [ CALL GETPDT ;YES, GO EXTRACT PROGRAM DATA FROM NICE MESSAGE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
JRST .+1 ] ;RETURN TO MAINLINE CODE
; GET OPERATING SYSTEM FILE SPECIFICATION IF INCLUDED IN MESSAGE
MOVE T4,RQLOPT ;GET OPTIONS
TXNE T4,LO%OPS ;IS OPERATING SYSTEM FILE SPEC IN MESSAGE ?
JRST [ CALL GETOPS ;YES, GO GET OPERATING SYSTEM FILE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVEM T3,RQLOPS ;SAVE POINTER TO ASCIZ FILE SPEC
JRST .+1] ;RETURN TO MAINLINE CODE
; ..
; ..
; GET SYSTEM PARAMETERS IF INCLUDED IN MESSAGE
MOVE T4,RQLOPT ;GET OPTIONS
TXNE T4,LO%PAR ;ARE PARAMETERS INCLUDED IN MESSAGE ?
JRST [ CALL GETPAR ;YES, GO EXTRACT PARAMETERS FROM MESSAGE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
JRST .+1] ;RETURN TO MAINLINE CODE
; DONE - ALL FIELDS EXTRACTED FROM NICE DOWN-LINE LOAD REQUEST MESSAGE
JUMPN T2,[RETBAD (.NRPRO)] ;ANY BYTES LEFT => NICE PROTOCOL ERROR
RETSKP ;RETURN SUCCESS
;GETRQD - ROUTINE TO EXTRACT THE FIELDS FROM A NICE UP-LINE DUMP
; REQUEST MESSAGE.
;
;ACCEPTS IN T1/ POINTER TO START OF NICE UP-LINE DUMP REQUEST MESSAGE
; T2/ NUMBER OF BYTES IN THE MESSAGE
; CALL GETRQD
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH THE FOLLOWING FIELDS SET UP:
;
; RQDTGT/ POINTER TO ASCIZ NAME OF TARGET NODE
; RQDSRV/ POINTER TO ASCIZ NAME OF SERVER NODE
; RQDLIN/ SERVER LINE ID (2 WORDS)
; RQDFIL/ POINTER TO ASCIZ DUMP FILESPEC
; RQDOPT/ OPTIONS FOR DUMP OPERATION
; RQDADR/ STARTING ADDRESS FOR THE DUMP
; RQDCNT/ NUMBER OF UNITS TO DUMP
GETRQD: CALL GETFCN ;GET FUNCTION CODE FROM NICE MESSAGE
RETBAD (.NRIMF) ;FAILED, RETURN "INVALID MESSAGE FORMAT"
CALL GETEXB ;GO GET OPTIONS FOR DUMP OPERATION
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVEM T4,RQDOPT ;SAVE OPTIONS
; GET NAME OF TARGET NODE TO BE DUMPED
MOVE T4,RQDOPT ;GET OPTION BITS
LOAD T4,DO%TGT,T4 ;GET TARGET SPECIFICATION FIELD
CAIE T4,.DOTGT ;EITHER TARGET & PATH OR JUST THE
CAIN T4,.DOPTH ; TARGET NODE SPECIFIED ?
JRST [ CALL GETNOD ;YES, GO EXTRACT TARGET NODE NAME FROM MESSAGE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVEM T3,RQDTGT ;SAVE POINTER TO ASCIZ TARGET NODE NAME
JRST .+1] ;RETURN TO MAINLINE CODE
; EXTRACT PATH TO TARGET IF INCLUDED IN THE MESSAGE
MOVE T4,RQDOPT ;GET OPTION BITS
LOAD T4,DO%TGT,T4 ;GET TARGET SPECIFICATION OPTION
CAIE T4,.DOPTH ;BOTH TARGET & PATH, OR JUST THE
CAIN T4,.DOSRV ; PATH ALONE SPECIFIED ?
JRST [ CALL GETNOD ;YES, GET NAME OF SERVER NODE FROM MESSAGE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVEM T3,RQDSRV ;SAVE POINTER TO ASCIZ SERVER NODE NAME
CALL GETLIN ;GO GET SERVER LINE ID
RETBAD () ;FAILED, RETURN ERROR TO CALLER
DMOVEM T3,RQDLIN ;SAVE SERVER LINE ID
JRST .+1] ;RETURN TO MAINLINE CODE
; ..
; ..
; DETERMINE OUTPUT FILE FOR DUMP
MOVE T4,RQDOPT ;GET OPTIONS FOR DUMP OPERATION
TXNE T4,DO%FIL ;OUTPUT FILE SPECIFIED ?
JRST [ SETZM T3 ;NO POINTER PROVIDED
CALL GETIMA ;YES, GO EXTRACT FILE SPEC FROM MESSAGE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVEM T3,RQDFIL ;SAVE POINTER TO ASCIZ FILE SPEC
JRST .+1] ;CONTINUE WITH MAINLINE CODE
; EXTRACT STARTING ADR AND COUNT IF PRESENT IN DUMP REQUEST MESSAGE
MOVE T4,RQDOPT ;GET OPTION BITS
TXNE T4,DO%ADR ;ADDRESS AND COUNT INCLUDED IN MESSAGE ?
JRST [ CALL GETMEM ;YES, GO EXTRACT THE ADDRESS
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVEM T3,RQDADR ;SAVE STARTING ADDRESS FOR THE DUMP
CALL GETMEM ;GO EXTRACT THE COUNT FROM THE MESSAGE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVEM T3,RQDCNT ;SAVE NUMBER OF UNITS TO DUMP
JRST .+1] ;CONTINUE WITH MAINLINE CODE
; DONE, RETURN TO CALLER
JUMPN T2,[RETBAD (.NRIMF)] ;ALL FIELDS SHOULD NOW HAVE BEEN EXTRACTED
RETSKP ;DONE, RETURN SUCCESS
;GETFCN - ROUTINE TO EXTRACT THE FUNCTION CODE FROM A NICE MESSAGE
;
;ACCEPTS IN T1/ POINTER TO START OF NICE MESSAGE (I.E., TO THE FUNCTION CODE)
; T2/ NUMBER OF BYTES IN THE NICE MESSAGE
; CALL GETFCN
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN NICE MESSAGE
; T2/ UPDATED COUNT OF BYTES REMAINING IN MESSAGE
; T3/ FUNCTION CODE
GETFCN: SOSGE T2 ;AT LEAST ON BYTE (FUNCTION CODE) IN MESSAGE ?
RETBAD (.NRIMF) ;NO, RETURN "INVALID MESSAGE FORMAT"
ILDB T3,T1 ;YES, LOAD THE FUNCTION CODE
RETSKP ;RETURN SUCCESS
;GETOPT - ROUTINE TO EXTRACT THE OPTION CODE FIELD (SUB-FUNCTION) FROM
; A NICE MESSAGE
;
;ACCEPTS IN T1/ POINTER TO OPTION FIELD
; T2/ NUMBER OF BYTES REMAINING IN MESSAGE
; CALL GETOPT
;RETURNS: +1 FAILED, NOT ENOUGH BYTES LEFT IN MESSAGE
; +2 SUCCESS, WITH OPTION CODE IN T4, PTR AND COUNT UPDATED
GETOPT: CALLRET GETEXB ;GET EXTENSIBLE BINARY FIELD
;GETPDT - ROUTINE TO EXTRACT THE PROGRAM DATA FIELDS FROM A NICE
; DOWN-LINE LOAD REQUEST MESSAGE
;
;ACCEPTS IN T1/ POINTER TO START OF PROGRAM DATA FIELDS
; T2/ COUNT OF BYTES REMAINING IN MESSAGE
; CALL GETPDT
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH THE FOLLOWING VARIABLES SET UP:
; RQLLDV/ BOOT LINE DEVICE TYPE AT TARGET NODE
; RQLCPU/ CPU TYPE OF TARGET SYSTEM (.CPXXX)
; RQLPGM/ PROGRAM TYPE BEING REQUESTED (.PTXXX)
; RQLSID/ SOFTWARE ID
GETPDT: ASUBR <GTPPTR,GTPCNT>
CALL GETLDV ;GO GET BOOT LINE DEVICE TYPE AT TARGET NODE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVEM T3,RQLLDV ;SAVE BOOT LINE DEVICE TYPE (.DTXXX)
CALL GETCPU ;GO GET CPU TYPE OF TARGET SYSTEM
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVEM T3,RQLCPU ;SAVE CPU TYPE OF TARGET (.CPXXX)
CALL GETPGM ;GO GET PROGRAM TYPE REQUESTED
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVEM T3,RQLPGM ;SAVE PROGRAM TYPE (.PTXXX)
CALL GETSID ;GO GET SOFTWARE ID OF SOFTWARE REQUESTED
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVEM T3,RQLSID ;SAVE FURTHER IDENTIFICATION OF SOFTWARE WANTED
RETSKP ;DONE, RETURN TO CALLER
;GETLDV - ROUTINE TO EXTRACT THE BOOT LOAD DEVICE TYPE FROM A NICE MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD (DEVICE TYPE) IN NICE MESSAGE
; T2/ NUMBER OF BYTES REMAINING IN NICE MESSAGE
; CALL GETLDV
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN NICE MESSAGE
; T2/ UPDATED COUNT OF BYTES REMAINING IN MESSAGE
; T3/ DEVICE TYPE CODE (.DTXXX)
GETLDV: SOSGE T2 ;AT LEAST ONE BYTE REMAINING IN MESSAGE ?
RETBAD (.NRIMF) ;NO, RETURN "INVALID MESSAGE FORMAT" ERROR
ILDB T3,T1 ;YES, GET DEVICE TYPE CODE (.DTXXX)
RETSKP ;DONE, RETURN SUCCESS
;GETCPU - ROUTINE TO EXTRACT THE CPU TYPE FROM A NICE MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD (CPU TYPE) IN NICE MESSAGE
; T2/ NUMBER OF BYTES REMAINING IN NICE MESSAGE
; CALL GETCPU
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDQTED POINTER TO NEXT FIELD IN NICE MESSAGE
; T2/ UPDATED COUNT OF BYTES REMAINING IN MESSAGE
; T3/ DEVICE TYPE CODE (.CPXXX)
GETCPU: SOSGE T2 ;AT LEAST ONE BYTE REMAINING IN MESSAGE ?
RETBAD (.NRIMF) ;NO, RETURN "INVALID MESSAGE FORMAT" ERROR
ILDB T3,T1 ;YES, GET CPU TYPE CODE (.CPXXX)
RETSKP ;DONE, RETURN SUCCESS
;GETPGM - ROUTINE TO EXTRACT THE PROGRAM TYPE FROM A NICE MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD (PROGRAM TYPE) IN NICE MESSAGE
; T2/ NUMBER OF BYTES REMAINING IN NICE MESSAGE
; CALL GETPGM
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN NICE MESSAGE
; T2/ UPDATED COUNT OF BYTES REMAINING IN MESSAGE
; T3/ PROGRAM TYPE CODE (.PTXXX)
GETPGM: SOSGE T2 ;AT LEAST ONE BYTE REMAINING IN MESSAGE ?
RETBAD (.NRIMF) ;NO, RETURN "INVALID MESSAGE FORMAT" ERROR
ILDB T3,T1 ;YES, GET PROGRAM TYPE CODE (.PTXXX)
RETSKP ;DONE, RETURN SUCCESS
;GETSID - ROUTINE TO GET A SOFTWARE ID FIELD FROM A MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD (SOFTWARE ID) IN MESSAGE
; T2/ NUMBER OF BYTES LEFT IN MESSAGE
; CALL GETSID
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED COUNT OF BYTES LEFT IN MESSAGE
; T3/ POINTER TO ASCIZ SOFTWARE ID STRING
GETSID: MOVE T4,T1 ;COPY POINTER TO # OF CHARACTERS IN STRING
ILDB T3,T4 ;GET NUMBER OF CHARACTERS IN SOFTWARE ID
CAILE T3,MAXSID ;IS STRING LONGER THAN MAX ALLOWED ?
RETBAD (.NRIMF) ;YES, RETURN "INVALID MESSAGE FORMAT" ERROR
SETZM T3 ;NO POINTER PROVIDED
CALL GETIMA ;NO, GO GET AN ASCIZ STRING FROM AN IMAGE FIELD
RETBAD () ;FAILED, RETURN ERROR TO CALLER
RETSKP ;DONE, RETURN WITH T3/ POINTER TO STRING
;GETBPW - ROUTINE TO EXTRACT THE BOOT PASSWORD FROM A NICE MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD (BOOT PASSWORD) IN NICE MESSAGE
; T2/ NUMBER OF BYTES REMAINING IN NICE MESSAGE
; CALL GETBPW
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN NICE MESSAGE
; T2/ UPDATED COUNT OF BYTES REMAINING IN MESSAGE
; T4-T3/ 64 BIT BOOT PASSWORD, RIGHT JUSTIFIED
GETBPW: MOVE T4,T1 ;COPY POINTER TO NUMBER OF BYTES IN PASSWORD
ILDB T3,T4 ;GET NUMBER OF BYTES IN BOOT PASSWORD
CAILE T3,MBPWSZ ;PASSWORD FIELD TOO BIG ?
RETBAD (.NRIMF) ;YES, RETURN "INVALID MESSAGE FORMAT" ERROR
CALL GETIMB ;GO GET BINARY NUMBER FROM IMAGE FIELD
RETBAD () ;FAILED, RETURN ERROR TO CALLER
RETSKP ;DONE, RETURN WITH T3-T4/ BINARY PASSWORD
;GETOPS - ROUTINE TO EXTRACT THE OPERATION SYSTEM FILE SPEC FROM A MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD (FILE SPEC) IN MESSAGE
; T2/ NUMBER OF BYTES REMAINING IN MESSAGE
; CALL GETOPS
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED COUNT OF BYTES LEFT IN MESSAGE
; T3/ POINTER TO ASCIZ OPERATING SYSTEM FILE SPEC
GETOPS: SETZM T3 ;NO POINTER PROVIDED
CALL GETIMA ;GO GET AN ASCII STRING FROM AN IMAGE FIELD
RETBAD () ;FAILED, RETURN ERROR TO CALLER
RETSKP ;DONE, T3 HAS POINTER TO FILE SPEC
;GETPAR - ROUTINE TO EXTRACT THE SYSTEM PARAMETERS FROM A MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD (SYSTEM PARAMETERS) IN MESSAGE
; T2/ NUMBER OF BYTES REMAINING IN THE MESSAGE
; CALL GETPAR
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED COUNT OF BYTES LEFT IN MESSAGE
; PARAMETERS:
; RQLNAM/ POINTER TO ASCIZ NAME TARGET NODE IS TO USE
; RQLNUM/ NUMBER OF TARGET NODE
; RQLHST/ POINTER TO ASCIZ NAME OF HOST FOR TASK LOADS
GETPAR: ASUBR <GTPPTR,GTPCNT>
SETOM RQLNAM ;INITIALIZE THE SYSTEM PARAMETERS TO KNOWN
SETOM RQLNUM ; VALUES SO THAT IT CAN BE DETERMINED WHICH
SETOM RQLHST ; PARAMETERS WERE EXTRACTED FROM THE MESSAGE
SOSGE GTPCNT ;AT LEAST ONE BYTE LEFT IN THE MESSAGE ?
RETBAD (.NRIMF) ;NO, RETURN "INVALID MESSAGE FORMAT" ERROR
ILDB T4,GTPPTR ;GET NUMBER OF BYTES IN PARAMETER FIELD
CAMLE T4,T2 ;AT LEAST THAT MANY BYTES LEFT IN MESSAGE ?
RETBAD (.NRIMF) ;NO, RETURN "INVALID MESSAGE FORMAT" ERROR
MOVE T1,GTPPTR ;GET POINTER TO NEXT FIELD IN MESSAGE
MOVE T2,GTPCNT ;GET COUNT OF BYTES LEFT IN MESSAGE
; LOOP OVER EACH PARAMETER
GTP010: SOSGE T2 ;DECREMENT BYTE COUNT
RETBAD (.NRIMF) ;NOT ENOUGH BYTES IN MESSAGE, RETURN ERROR
ILDB T3,T1 ;GET PARAMETER VALUE TYPE CODE (.PVXXX)
CAIle T3,.PVHST ;PARAMETER VALUE WITHIN ACCEPTABLE RANGE ?
RETBAD (.NRIPV) ;NO, RETURN "INVALID PARAMETER VALUE" ERROR
CAIN T3,.PVEND ;END MARK ENCOUNTERED ?
RETSKP ;YES, RETURN SUCCESS
MOVE T3,PARTAB(T3) ;GET DISPATCH ADDRESS
CALL (T3) ;GO HANDLE THIS TYPE OF PARAMETER
RETBAD () ;FAILED, RETURN ERROR TO CALLER
JRST GTP010 ;GO GET NEXT PARAMETER
; TABLE OF DISPATCH ADDRESSES TO EXTRACT PARAMETERS FROM NICE MESSAGES
PARTAB: RSKP ;END MARK, NO OP
PARNAM ;NAME NODE IS TO USE FOR NODE INIT
PARNUM ;NUMBER NODE IS TO USE
PARHST ;HOST FOR TASK LOADS
;PARNAM - ROUTINE TO EXTRACT THE NODE NAME PARAMETER FROM A NICE MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NODE NAME
; T2/ NUMBER OF BYTES LEFT IN MESSAGE
; CALL PARNAM
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED COUNT OF BYTES LEFT IN MESSAGE
; RQLNAM/ POINTER TO NODE NAME
PARNAM: CALL GETNOD ;GO GET THE NODE NAME
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVEM T3,RQLNAM ;SAVE NAME PARAMETER
RETSKP ;DONE, RETURN SUCCESS
;PARNUM - ROUTINE TO RETURN THE NUMBER TO BE USED BY THE TARGET NODE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD (NUMBER) IN NICE MESSAGE
; T2/ NUMBER OF BYTES LEFT IN MESSAGE
; CALL PARNUM
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED COUNT OF BYTES LEFT IN MESSAGE
; RQLNUM/ NUMBER TO BE USED
PARNUM: SOJL T2,[RETBAD (.NRIMF)] ;DECREMENT COUNT FOR COUNT-BYTE
ILDB T4,T1 ;GET COUNT BYTE
CAIE T4,2 ;A TWO BYTE NUMBER ?
RETBAD (.NRIMF) ;NO, RETURN "INVALID MESSAGE FORMAT"
CALL GETTWO ;GO GET THE NEXT TWO BYTE FIELD FROM THE MESSAGE
JRST [RETBAD (.NRIMF)] ;FAIL IF INSUFFICIENT BYTES IN MESSAGE
MOVEM T4,RQLNUM ;SAVE THE NUMBER
RETSKP ;DONE, RETURN SUCCESS
;PARHST - ROUTINE TO EXTRACT THE TASK LOAD HOST NAME FROM A NICE MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NODE NAME
; T2/ NUMBER OF BYTES LEFT IN MESSAGE
; CALL PARHST
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED COUNT OF BYTES LEFT IN MESSAGE
; RQLHST/ POINTER TO NODE NAME
PARHST: CALL GETNOD ;GO GET THE NODE NAME
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVEM T3,RQLHST ;SAVE POINTER TO NAME OF HOST FOR TASK LOADS
RETSKP ;DONE, RETURN SUCCESS
;GETIMA - ROUTINE TO GET AN ASCII STRING FROM AN IMAGE FIELD IN A NICE MSG
;
;ACCEPTS IN T1/ POINTER TO START OF IMAGE FIELD
; T2/ NUMBER OF BYTES REMAINING IN NICE MESSAGE
; T3/ 0 TO USE GENERAL STRING AREA, OR POINTER FOR ASCII STRING
; CALL GETIMA
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED COUNT OF BYTES REMAINING IN MESSAGE
; T3/ POINTER TO ASCIZ STRING IN STRING STORAGE AREA
GETIMA::ASUBR <GIAPTR,GIACNT,GIADST,GIALEN>
SOSGE T3,GIACNT ;AT LEAST ONE BYTE REMAINING IN MESSAGE ?
RETBAD (.NRIMF) ;NO, RETURN "INVALID MESSAGE FORMAT" ERROR
ILDB T4,GIAPTR ;YES, GET # OF CHARACTERS IN STRING
CAMLE T4,GIACNT ;AT LEAST THAT MANY CHARACTERS LEFT IN MESSAGE ?
RETBAD (.NRIMF) ;NO, RETURN "INVALID MESSAGE FORMAT" ERROR
MOVEM T4,GIALEN ;SAVE # OF CHARACTERS IN FIELD
SUB T3,T4 ;COMPUTE # OF BYTES REMAINING AFTER THIS FIELD
MOVEM T3,GIACNT ;SAVE UPDATED BYTE COUNT
SKIPN T3,GIADST ;ANY POINTER PROVIDED AS INPUT ?
MOVE T3,[POINT 7,TMPSTR] ;NO, SET UP POINTER TO TEMPORARY DESTINATION
; LOOP OVER EACH CHARACTER IN THE STRING
GIA010: SOJL T4,GIA020 ;DECREMENT COUNT OF CHARACTERS LEFT IN STRING
ILDB T2,GIAPTR ;GET A CHARACTER FROM THE STRING
SKIPE T2 ;DISCARD NULLS
IDPB T2,T3 ;STORE CHARACTER INTO TEMPORARY DESTINATION
JRST GIA010 ;LOOP OVER ALL CHARACTERS IN THE STRING
; TERMINATE THE STRING WITH A NULL AND MOVE TO STRING STORAGE AREA
GIA020: MOVEI T2,.CHNUL ;GET A NULL
IDPB T2,T3 ;TERMINATE THE STRING WITH A NULL
SKIPE GIADST ;WAS A DESTINATION POINTER SUPPLIED ?
JRST [ MOVE T1,T3 ;COPY POINTER TO END OF STRING
JRST GIA030 ] ;GET REMAINING ITEMS TO RETURN
MOVEI T1,TMPSTR ;GET ADDRESS OF TEMPORARY STRING LOCATION
CALL STOSTR ;STORE THE STRING IN THE PERMANENT STRING AREA
RETBAD (.NRRES) ;FAILED, RETURN "RESOURCE ERROR"
MOVE T3,T1 ;GET POINTER TO PERMANENT STRING LOCATION
GIA030: MOVE T2,GIACNT ;GET # OF BYTES REMAINING IN MESSAGE
MOVE T1,GIAPTR ;GET POINTER TO NEXT FIELD IN MESSAGE
MOVE T4,GIALEN ;RETURN LENGTH OF FIELD
RETSKP ;DONE, RETURN SUCCESS
;GETIMB - ROUTINE TO EXTRACT A BINARY NUMBER FROM AN IMAGE FIELD
;
;ACCEPTS IN T1/ POINTER TO START OF FIELD
; T2/ NUMBER OF BYTES REMAINING IN MESSAGE
; CALL GETIMB
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED COUNT OF BYTES REMAINING IN MESSAGE
; T3-T4/ BINARY NUMBER
GETIMB: ASUBR <GIBPTR,GIBCNT,GIBSFT>
SOSGE T3,GIBCNT ;AT LEAST ONE BYTE REMAINING IN MESSAGE ?
RETBAD (.NRIMF) ;NO, RETURN "INVALID MESSAGE FORMAT" ERROR
ILDB T1,GIBPTR ;YES, GET # OF CHARACTERS IN STRING
CAMLE T1,GIBCNT ;AT LEAST THAT MANY CHARACTERS LEFT IN MESSAGE ?
RETBAD (.NRIMF) ;NO, RETURN "INVALID MESSAGE FORMAT" ERROR
SUB T3,T1 ;COMPUTE COUNT REMAINING AFTER THIS FIELD
MOVEM T3,GIBCNT ;SAVE UPDATED COUNT
MOVEI T2,MAXIMB ;GET MAX NUMBER OF BYTES IN IMAGE BINARY FIELDS
SUB T2,T1 ;COMPUTE NUMBER OF EXTRA HIGH ORDER BYTES
MOVEM T2,GIBSFT ;SAVE NUMBER OF EXTRA SHIFTS TO DO
SETZB T3,T4 ;CLEAR ACCUMULATORS TO RECEIVE RESULT
; LOOP OVER EACH BYTE IN THE FIELD
GIB010: SOJL T1,GIB020 ;IF ALL BYTES DEPOSITED, GO DO REMAINING SHIFTS
LSHC T3,-8 ;SHIFT ANY PREVIOUS BYTES RIGHT ONE BYTE
ILDB T2,GIBPTR ;GET A BYTE FROM THE IMAGE FIELD
DPB T2,[POINT 8,T3,7] ;DEPOSIT INTO HIGH ORDER END OF BINARY NUMBER
JRST GIB010 ;LOOP OVER ALL BYTES IN THE FIELD
; HERE TO SHIFT THE NUMBER UNTIL IT IS RIGHT-ADJUSTED IN THE TWO AC'S
GIB020: SOSGE GIBSFT ;ANOTHER SHIFT REQUIRED ?
JRST GIB030 ;NO, GO RETURN TO CALLER
LSHC T3,-8 ;YES, MOVE THE NUMBER ONE BYTE TO THE RIGHT
JRST GIB020 ;LOOP OVER EACH EXTRA HIGH ORDER BYTE
; HERE TO RETURN TO CALLER
GIB030: MOVE T1,GIBPTR ;GET POINTER TO NEXT FIELD IN MESSAGE
MOVE T2,GIBCNT ;GET UPDATED COUNT OF BYTES LEFT IN MESSAGE
RETSKP ;RETURN, T3 AND T4 CONTAIN THE BINARY NUMBER
;GETLIN - ROUTINE TO GET A LINE ID FROM A NICE MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD (LINE ID) IN NICE MESSAGE
; T2/ COUNT OF NUMBER OF BYTES LEFT IN NICE MESSAGE
; CALL GETLIN
;RETURNS: +1 FAILED, NICE RETURN CODE
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED COUNT OF BYTES LEFT IN MESSAGE
; T3/ LINE DEVICE TYPE (.DTXXX),,LINE CONTROLLER #
; T4/ LINE UNIT NUMBER,,LINE STATION ADDRESS
;
; NOTE: IF "ALL LINES" IS SPECIFIED AS THE LINE ID, THEN ON A SUCCESS
; RETURN, T3/ -1 AND T4/ UNDEFINED
GETLIN::ASUBR <GTLPTR,GTLCNT>
SOSGE GTLCNT ;AT LEAST ONE BYTE LEFT IN MESSAGE ?
RETBAD (.NRILN) ;NO, RETURN "INVALID LINE ID" ERROR
ILDB T4,GTLPTR ;GET LINE ID FORMAT BYTE
CAIL T4,.LTALL ;IS THE LINE ID FORMAT WITHIN
CAILE T4,.LTSTR ; LEGAL LIMITS ?
RETBAD (.NRILN) ;NO, RETURN "INVALID LINE ID" ERROR
MOVE T1,GTLPTR ;GET POINTER TO REMAINDER OF LINE ID
MOVE T2,GTLCNT ;GET REMAINING COUNT OF BYTES IN MESSAGE
CALLRET @GTLTAB(T4) ;YES, CALL LINE-FORMAT-SPECIFIC ROUTINE
; TABLE OF LINE-FORMAT-SPECIFIC ROUTINES TO EXTRACT LINE-ID'S FROM MESSAGES
GTLTAB: GTLALL ;ALL LINES
GTLSTD ;STANDARD NICE PROTOCOL LINE IDENTIFIER
GTLSTR ;ASCII NAME STRING
;GTLALL - ROUTINE TO EXTRACT A FORMAT 0 LINE ID FROM A MESSAGE
;
;ACCEPTS IN T1/ POINTER TO BYTE AFTER LINE ID FORMAT
; T2/ NUMBER OF BYTES REMAINING IN NICE MESSAGE
; CALL GTLALL
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED COUNT OF BYTES IN MESSAGE
; T3/ -1, INDICATING "ALL LINES" WAS SPECIFIED
GTLALL: SETOM T3 ;NOTE THAT ALL LINES WAS SPECIFIED IN MESSAGE
RETSKP ;DONE, RETURN
;GTLSTD - ROUTINE TO EXTRACT A STANDARD NICE LINE ID FROM A NICE MESSAGE
;
;ACCEPTS IN T1/ POINTER TO BYTE AFTER LINE ID FORMAT BYTE
; T2/ COUNT OF BYTES REMAINING IN NICE MESSAGE
; CALL GTLSTD
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED COUNT OF BYTES REMAINING IN MESSAGE
; T3/ LINE DEVICE TYPE (.DTXXX),,LINE CONTROLLER #
; T4/ LINE UNIT NUMBER,,LINE STATION ADDRESS
GTLSTD: SUBI T2,4 ;DECREMENT REMAINING BYTES BY LINE ID BYTES
JUMPL T2,[RETBAD (.NRILN)] ;IF NOT ENOUGH BYTES LEFT, RETURN ERROR
PUSH P,T2 ;SAVE COUNT
ILDB T2,T1 ;GET LINE DEVICE TYPE (.DTXXX)
ILDB T3,T1 ;GET LINE CONTROLLER NUMBER
HRL T3,T2 ;PUT DEVICE TYPE IN LH
ILDB T2,T1 ;GET LINE UNIT NUMBER
ILDB T4,T1 ;GET LINE STATION NUMBER
HRL T4,T2 ;FORM UNIT,,STATION NUMBERS
POP P,T2 ;RESTORE COUNT
RETSKP ;DONE, RETURN SUCCESS
;GTLSTR - ROUTINE TO EXTRACT A LINE IN FORMAT 2 (STRING) FROM A MESSAGE
;
;ACCEPTS IN T1/ POINTER TO BYTE AFTER LINE ID FORMAT BYTE
; T2/ NUMBER OF BYTES REMAINING IN MESSAGE
; CALL GTLSTR
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED COUNT OF BYTES REMAINING IN MESSAGE
; T3-T4/ LINE ID IN STANDARD FORMAT
GTLSTR: RETBAD (.NRILN) ;FOR NOW, JUST FAIL- STRINGS NOT SUPPORTED
;GETMEM - ROUTINE TO GET A MEMORY ADDRESS FROM A NICE OR MOP MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD (MEM ADDRESS) IN MESSAGE
; T2/ NUMBER OF BYTES LEFT IN THE MESSAGE
; CALL GETMEM
;RETURNS: +1 FAILED, BADLY FORMED MESSAGE
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED COUNT OF BYTES LEFT IN MESSAGE
; T3/ MEMORY ADDRESS (OR MEMORY SIZE)
GETMEM: ASUBR <GTMPTR,GTMCNT>
MOVE T2,GTMCNT ;GET # OF BYTES LEFT IN MESSAGE
SUBI T2,4 ;DECREMENT BY SIZE OF MEM ADDRESS
JUMPL T2,R ;RETURN FAILURE IF NOT ENOUGH BYTES LEFT
MOVEM T2,GTMCNT ;SAVE UPDATED BYTE COUNT
MOVE T1,GTMPTR ;GET POINTER TO NEXT FIELD IN MESSAGE
CALL GET4 ;GET THE NEXT 4-BYTE FIELD FROM MESSAGE
MOVE T3,T2 ;GET MEMORY ADDRESS
MOVE T2,GTMCNT ;GET UPDATED BYTE COUNT
RETSKP ;DONE, RETURN
;GETTWO - ROUTINE TO GET A TWO BYTE NUMBER FROM A NICE MESSAGE
;
;ACCEPTS T1/ POINTER TO NEXT FIELD IN NICE MESSAGE
; T2/ COUNT OF BYTES LEFT IN NICE MESSAGE
; CALL GETTWO
;RETURNS: +1 FAILED
; +2 WITH T1/ UPDATED BYTE POINTER
; T2/ UPDATED BYTE COUNTER
; T3/ NUMBER FROM NICE MESSAGE
GETTWO::SOSG T2 ;ANOTHER BYTE ?
RET
ILDB T3,T1 ;GET NEXT BYTE FROM MESSAGE
SOSGE T2 ;ANOTHER BYTE ?
RET
ILDB T4,T1 ;GET SECOND BYTE FROM MESSAGE
DPB T4,[POINT 8,T3,27] ;ADD HIGH ORDER BYTE OF NUMBER
RETSKP ;RETURN
;GETFLD - ROUTINE TO EXTRACT A FIELD FROM AN EVENT LOGGING NICE MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD IN MSG
; T2/ NUMBER OF BYTES LEFT IN MESSAGE
; CALL GETFLD
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED COUNT OF BYTES LEFT IN MESSAGE
; T3/ DATA TYPE CODE OF THIS FIELD
; T4/ DATA-TYPE-DEPENDENT INFO
GETFLD: SOSGE T2 ;AT LEAST ONE BYTE LEFT
RETBAD (.NRIMF) ;FAILED, INVALID MESSAGE FORMAT
ILDB T3,T1 ;GET DATA TYPE ID BYTE
CAIL T3,EVTLEN ;VALID DATA TYPE SPECIFIED ?
RETBAD (.NRIMF) ;NO, FAIL WITH INVALID MESSAGE FORMAT
CALLRET @EVTDSP(T3) ;EXTRACT SPECIFIC DATA
EVTDSP: RETBAD (.NRIMF) ; 0 - ILLEGAL
REGFLD ; 1 - DEVICE REGISTERS
TIMFLD ; 2 - TIME OF DAY
DATFLD ; 3 - DATE
UPTFLD ; 4 - UPTIME
DEVFLD ; 5 - DEVICE
RSNFLD ; 6 - REASON CODE
RCVFLD ; 7 - RECOVERY ACTION
OPSFLD ; 8 - OPERATING SYSTEM
NODFLD ; 9 - NODE ID
MCDFLD ; 10 - MICROCODE DESCRIPTOR
LPRFLD ; 11 - LINE PROTOCOL
TPRFLD ; 12 - TRANSMISSION PROTOCOL
THRFLD ; 13 - THRESHOLD VALUE
TXTFLD ; 14 - ASCII TEXT
EVTLEN==.-EVTDSP
; ROUTINES TO EXTRACT SPECIFIC FIELDS FROM NICE EVENT LOGGING MESSAGES
; DATFLD - EXTRACT DATE FIELD FROM A NICE EVENT LOGGING MESSAGE
DATFLD: STKVAR <DTFDAY,DTFMON,DTFYR,DTFPTR,DTFCNT>
SUBI T2,2 ;DECREMENT COUNT BY SIZE OF DAY AND MONTH
JUMPLE T2,[RETBAD (.NRIMF)] ;FAIL IF NOT ENOUGH BYTES
ILDB T3,T1 ;GET THE DAY
MOVEM T3,DTFDAY ;SAVE THE DAY
ILDB T3,T1 ;GET THE MONTH
MOVEM T3,DTFMON ;SAVE MONTH
CALL GETTWO ;GET THE YEAR
RETBAD () ;FAILED, RETURN ERROR
MOVEM T3,DTFYR ;SAVE YEAR
MOVEM T2,DTFCNT ;SAVE CURRENT COUNT OF BYTES IN MESSAGE
MOVEM T1,DTFPTR ;SAVE POINTER TO NEXT FIELD IN MESSAGE
; CONVERT DATE TO STANDARD TOPS20 FORMAT
HRL T2,DTFYR ;GET THE YEAR
HRR T2,DTFMON ;GET THE MONTH
HRLZ T3,DTFDAY ;GET THE DAY
MOVX T4,0 ;NO FLAGS
IDCNV ;CONVERT THE DATE
ERJMP [RETBAD (.NRNPE)] ;FAILED
MOVE T4,T2 ;GET DATE
MOVX T3,.EDDAT ;GET EVENT DATA TYPE CODE
MOVE T2,DTFCNT ;GET COUNT OF BYTES IN MESSAGE
MOVE T1,DTFPTR ;GET POINTER TO NEXT FIELD IN MESSAGE
RETSKP ;DONE, RETURN SUCCESS
; UPTFLD - ROUTINE TO EXTRACT NODE UPTIME FROM A NICE EVENT LOGGING MESSAGE
UPTFLD: CALL GETEXB ;GET UPTIME
RETBAD () ;FAILED
MOVX T3,.EDUPT ;GET EVENT DATA TYPE CODE
RETSKP ;DONE, RETURN SUCCESS
; DEVFLD - ROUTINE TO EXTRACT A DEVICE DESIGNATOR FROM A NICE LOGGING MESSAGE
DEVFLD: STKVAR <DVFBLK,DVFPTR,DVFCNT,<DVFDEV,2>>
; EXTRACT THE DEVICE ID FROM THE MESSAGE
SOSGE T2 ;AT LEAST IMAGE FIELD BYTE COUNT PRESENT ?
RETBAD (.NRIMF) ;NO, FAIL
ILDB T4,T1 ;YES, GET NUMBER OF BYTES IN DEVICE ID
SUB T2,T4 ;ENOUGH BYTES LEFT IN MESSAGE ?
JUMPL T2,[RETBAD (.NRIMF)] ;NO, FAIL
SUBI T4,3 ;AT LEAST FORMAT CODE BYTE, DEVICE TYPE, AND
JUMPL T4,[RETBAD (.NRILN)] ; CONTROLLER NUMBER MUST BE PRESENT
ILDB T3,T1 ;YES, GET FORMAT CODE BYTE
CAIE T3,.LTSTD ;STANDARD LINE ID FORMAT ?
RETBAD (.NRILN) ;NO, INVALID LINE ID
ILDB T3,T1 ;GET DEVICE TYPE CODE (.DTXXX)
HRLM T3,DVFDEV ;SAVE DEVICE TYPE CODE
ILDB T3,T1 ;GET CONTROLLER NUMBER
HRRM T3,DVFDEV ;SAVE CONTROLLER NUMBER
SETOM 1+DVFDEV ;INITIALIZE UNIT AND STATION NUMBERS
SOSGE T4 ;IS UNIT NUMBER PRESENT ?
JRST DVFLD2 ;NO, GO SAVE DEVICE ID
ILDB T3,T1 ;YES, GET UNIT NUMBER
HRLM T3,1+DVFDEV ;SAVE UNIT NUMBER
SOSGE T4 ;STATION ADDRESS PRESENT ?
JRST DVFLD2 ;NO, GO SAVE DEVICE ID
ILDB T3,T1 ;GET STATION ADDRESS
HRRM T3,1+DVFDEV ;SAVE STATION ADDRESS
; ASSIGN FREE SPACE TO HOLD DEVICE
DVFLD2: MOVEM T2,DVFCNT ;SAVE COUNT OF BYTES IN MESSAGE
MOVEM T1,DVFPTR ;SAVE UPDATED POINTER
MOVX T1,3 ;DEVICE ID'S ARE 2 WORDS LONG
CALL GETFRE ;GET SOME FREE SPACE
RETBAD () ;FAILED
MOVEM T1,DVFBLK ;SAVE BLOCK ADDRESS
; RETURN BLOCK WITH DEVICE
DMOVE T2,DVFDEV ;GET DEVICE
DMOVEM T2,1(T1) ;SAVE DEVICE
MOVE T4,T1 ;GET ADDRESS OF BLOCK HOLDING DEV
MOVX T3,.EDDEV ;GET EVENT DATA TYPE FOR A DEVICE
MOVE T2,DVFCNT ;GET COUNT OF BYTES LEFT IN MESSAGE
MOVE T1,DVFPTR ;GET POINTER TO NEXT FIELD IN MESSAGE
RETSKP ;DONE, RETURN SUCCESS
RSNFLD: CALL GETEXB ;GET REASON
RETBAD () ;FAILED
MOVX T3,.EDRSN ;GET EVENT DATA TYPE CODE
RETSKP ;DONE, RETURN SUCCESS
;NODFLD - EXTRACT NODE ID FROM NICE EVENT LOGGING MESSAGE
NODFLD: STKVAR <NDFPTR,NDFCNT,NDFBLK>
MOVEM T1,NDFPTR ;SAVE POINTER INTO NICE MESSAGE
MOVEM T2,NDFCNT ;SAVE NUMBER OF BYTES LEFT IN MSG
; ASSIGN FREE SPACE FOR THE NODE NAME
MOVX T1,3 ;GET MAX NUMBER OF WORDS IN A NODE NAME
CALL GETFRE ;ASSIGN FREE SPACE
RETBAD () ;FAILED
MOVEM T1,NDFBLK ;SAVE ADDRESS OF FREE BLOCK
; EXTRACT NODE NAME FROM THE MESSAGE
MOVE T3,NDFBLK ;GET ADDRESS OF FREE BLOCK
HRLI T3,(POINT 7,0,35) ;FORM POINTER TO DESTINATION FOR NAME
MOVE T2,NDFCNT ;GET # OF BYTES LEFT IN NICE MESSAGE
MOVE T1,NDFPTR ;GET POINTER TO NODE NAME FIELD
CALL GETIMA ;EXTRACT NODE ID FROM MESSAGE
JRST NDFERR ;FAILED, FREE SPACE AND RETURN ERROR
MOVX T3,.EDNOD ;GET NODE DATA TYPE CODE
MOVE T4,NDFBLK ;GET ADDRESS OF BLOCK HOLDING NAME
HRLI T4,(POINT 7,0,35) ;POINT TO NODE NAME
RETSKP ;DONE, RETURN SUCCESS
; HERE ON AN ERROR TO RELEASE SPACE
NDFERR: EXCH T1,NDFBLK ;GET BLOCK ADDRESS AND SAVE ERROR CODE
CALL RELFRE ;RELEASE THE BLOCK
FATAL.ERROR ; Die on release failure
MOVE T1,NDFBLK ;RESTORE ERROR CODE
RETBAD () ;FAIL
; MCDFLD - EXTRACT MICROCODE DESCRIPTOR FROM NICE EVENT LOGGING MESSAGE
MCDFLD: SUBI T2,2 ;MICROCODE ID IS TWO BYTES
JUMPL T2,[RETBAD (.NRIMF)] ;FAIL IF NOT ENOUGH BYTES
ILDB T3,T1 ;GET MICROCODE TYPE
ILDB T4,T1 ;GET MICROCODE VERSION
HRL T4,T3 ;FORM TYPE,,VERSION
MOVX T3,.EDMCD ;GET MICROCODE DATA TYPE CODE
RETSKP ;RETURN MICROCODE ID
; ASCII DATA
TXTFLD: ASUBR <AFDPTR,AFDCNT,AFDBLK,AFDSTR>
MOVE T1,AFDCNT ;GET NUMBER OF BYTES TO EXTRACT
IDIVI T1,5 ;COMPUTE # OF WORDS
SKIPE T2 ;ROUND UP IF
ADDI T1,1 ; NECESSARY
ADDI T1,1 ;ACCOUNT FOR BLOCK HEADER
CALL GETFRE ;GET FREE SPACE FOR THE TEXT
RETBAD () ;FAILED
HRLI T1,(POINT 7,0,35) ;FORM POINTER TO DESTINATION
MOVEM T1,AFDSTR ;SAVE POINTER TO STRING
MOVE T3,T1 ;GET POINTER TO DESTINATION FOR TEXT
MOVE T2,AFDCNT ;GET COUNT OF BYTES LEFT IN MESSAGE
MOVE T1,AFDPTR ;GET POINTER TO MESSAGE
CALL GETIMA ;EXTRACT IMAGE ASCII DATA
RETBAD () ;FAILED
MOVX T3,.EDTXT ;GET ASCII DATA TYPE CODE
MOVE T4,AFDSTR ;GET POINTER TO ASCII STRING
RETSKP ;DONE, RETURN SUCCESS
;REGFLD - ROUTINE TO EXTRACT REGISTER DATA FROM NICE EVENT LOGGING MESSAGE
REGFLD: ASUBR <RGFPTR,RGFCNT,RGFNUM,RGFBLK>
; COMPUTE NUMBER OF BYTES IN REGISTER DATA
SOSGE RGFCNT ;AT LEAST COUNT BYTE PRESENT ?
RETBAD (.NRIMF) ;NO, FAIL
ILDB T1,RGFPTR ;GET NUMBER OF BYTES IN REGISTER DATA
MOVEM T1,RGFNUM ;SAVE NUMBER OF BYTES TO MOVE
; CHECK THAT ENOUGH BYTES ARE ACTUALLY PRESENT IN MESSAGE
MOVE T2,RGFCNT ;GET NUMBER OF BYTES LEFT IN MESSAGE
SUB T2,T1 ;COMPUTE # LEFT AFTER REMOVING REGISTER DATA
JUMPL T2,[RETBAD (.NRIMF)] ;NOT ENOUGH BYTES LEFT
MOVEM T2,RGFCNT ;STORE UPDATED COUNT OF BYTES LEFT IN MESSAGE
; ASSIGN SPACE TO HOLD THE REGISTER DATA
IDIVI T1,4 ;COMPUTE # OF WORDS NEEDED FOR THAT MANY BYTES
SKIPE T2 ; AND ROUND UP
ADDI T1,1 ; IF NEEDED
ADDI T1,2 ;ACCOUNT FOR BLOCK HEADER AND WORD HOLDING COUNT
CALL GETFRE ;ASSIGN SPACE FOR REGISTER DATA
RETBAD () ;FAILED
MOVEM T1,RGFBLK ;SAVE BLOCK ADDRESS
; SET UP TO EXTRACT THE REGISTER DATA
MOVE T4,RGFNUM ;GET COUNT OF BYTES IN REGISTER DATA
MOVEM T4,1(T1) ;STORE IN ASSIGNED BLOCK
MOVEI T3,2(T1) ;GET DESTINATION ADDRESS
HRLI T3,(POINT 8,) ;FORM DESTINATION POINTER
; PLACE ALL THE REGISTER DATA IN THE ASSIGNED BLOCK
RGF010: SOSGE T4 ;ANY BYTES LEFT TO MOVE ?
JRST RGF020 ;NO, RETURN BLOCK TO CALLER
ILDB T2,RGFPTR ;GET A BYTE OF REGISTER DATA
IDPB T2,T3 ;STORE THE BYTE
JRST RGF010 ;LOOP OVER ALL BYTES
RGF020: MOVE T1,RGFPTR ;RESTORE UPDATED POINTER
MOVE T2,RGFCNT ; AND UPDATED COUNT OF BYTES LEFT IN MESSAGE
MOVX T3,.EDREG ;GET "REGISTER DATA" TYPE CODE
MOVE T4,RGFBLK ;GET ADDRESS OF BLOCK HOLDING REGISTER DATA
RETSKP ;DONE, RETURN
;OPSFLD - ROUTINE TO EXTRACT OPERATING SYSTEM ID FROM NICE MESSAGES
OPSFLD: STKVAR <OPFTYP>
SOSGE T2 ;AT TYPE CODE BYTE PRESENT ?
RETBAD (.NRIMF) ;NO, FAIL
ILDB T4,T1 ;GET OPERATING SYSTEM TYPE CODE
MOVEM T4,OPFTYP ;SAVE OPERATING SYSTEM TYPE
HRLI T3,440000 ;USE ptr WITH ZERO SIZE FIELD TO DISCARD text
CALL GETIMA ;IGNORE ASCII SYSTEM ID
RETBAD () ;FAILED
MOVX T3,.EDOPS ;OPERATING SYSTEM CODE BEING RETURNED
MOVE T4,OPFTYP ;GET OPERATING SYSTEM TYPE CODE
RETSKP
;TIMFLD - ROUTINE TO EXTRACT THE TIME FROM A NICE EVENT LOGGING MESSAGE
TIMFLD: CALL GETEXB ;GET EXTENSIBLE BINARY FIELD
RETBAD () ;FAILED
MOVX T3,.EDTIM ;GET TIME FIELD DATA TYPE CODE
RETSKP ;DONE, RETURN SUCCESS
;RCVFLD - ROUTINE TO EXTRACT THE RECOVERY OPTION FROM NICE EVENT MESSAGES
;
; NOTE: THIS FIELD IS NEVER SENT, AND IS THEREFORE IGNORED
RCVFLD: HRLI T3,440000 ;USE PTR WITH ZERO SIZE FIELD TO DISCARD TEXT
CALL GETIMA ;EXTRACT AND DISCARD RECOVERY ACTION
RETBAD () ;FAILED
MOVX T3,.EDRCV ;GET RECOVERY ACTION DATA TYPE CODE
SETZM T4 ;NO DATA UNTIL FIELD CONTENTS SPECIFIED
RETSKP ;DONE, RETURN
;THRFLD - THRESHOLD VALUE
THRFLD: CALL GETTWO ;GET TWO BYTE BINARY NUMBER
RETBAD () ;FAILED
MOVE T4,T3 ;GET VALUE
MOVX T3,.EDTHR ;GET THRESHOLD TYPE CODE
RETSKP
TPRFLD:
LPRFLD: RETBAD (.NRIMF) ;NOT CODED YET
;GET4 - ROUTINE TO GET A FOUR-BYTE FIELD FROM A MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD IN MESSAGE
; CALL GET4
;RETURNS: +1 ALWAYS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ FOUR-BYTE NUMBER FROM MESSAGE
GET4: ASUBR <GT4PTR,GT4NUM>
MOVE T1,GT4PTR ;GET POINTER TO NEXT FIELD IN MESSAGE
MOVEI T2,4 ;WE HAVE ENOUGH
CALL GETTWO ;GO GET NEXT 2-BYTE NUMBER FROM MESSAGE
JFCL
MOVEM T3,GT4NUM ;SAVE FIRST TWO BYTES OF FOUR BYTE NUMBER
CALL GETTWO ;GET TWO HIGH ORDER BYTES OF THE NUMBER
JFCL
DPB T3,[POINT 16,GT4NUM,19] ;ADD HIGH ORDER BYTES TO NUMBER
MOVE T2,GT4NUM ;GET ENTIRE ASSEMBLED NUMBER
RET ;RETURN
;GETNUM - ROUTINE TO EXTRACT A NODE NUMBER FROM A MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NUMBER IN MESSAGE
; T2/ COUNT OF BYTES LEFT IN MESSAGE
; CALL GETNUM
;RETURNS: +1 FAILED
; +2 SUCCESS, WITH T1/ UPDATED POINTER
; T2/ UPDATED COUNT
; T3-T4/ BINARY NUMBER FROM MESSAGE
GETNUM::CALLRET GETEXB ;GET EXTENSIBLE BINARY FIELD FROM MESSAGE
;GETEXA - ROUTINE TO GET AN EXTENSIBLE ASCII STRING FROM A NICE MESSAGE
;
;ACCEPTS IN T1/ POINTER TO FIRST BYTE OF STRING IN NICE MESSAGE
; T2/ DESTINATION ADDRESS FOR ASCIZ STRING
; T3/ NUMBER OF BYTES REMAINING IN MESSAGE
; CALL GETEXA
;RETURNS: +1 FAILURE, BADLY FORMED MESSAGE
; SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED POINTER TO DESTINATION STRING
; T3/ UPDATED BYTE COUNT
GETEXA: HRLI T2,(POINT 7,) ;FORM POINTER TO DESTINATION STRING
EXTAS2: SOJL T3,R ;RETURN IF INSUFFICIENT BYTES LEFT IN MESSAGE
ILDB T4,T1 ;GET A BYTE FROM THE NICE MESSAGE
IDPB T4,T2 ;STORE ASCII CHARACTER INTO DESTINATION
TXNE T4,EXTBIT ;IS NEXT BYTE PART OF THIS FIELD ?
JRST EXTAS2 ;YES, GO GET THE NEXT BYTE
MOVEI T4,.CHNUL ;NO, GET A NULL
IDPB T4,T2 ;TERMINATE THE ASCIZ DESTINATION STRING
RETSKP ;RETURN SUCCESS
;GETEXB - ROUTINE TO EXTRACT AN EXTENSIBLE BINARY FIELD FROM A MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD (EXTENSIBLE FIELD) IN MESSAGE
; T2/ COUNT OF BYTES REMAINING IN MESSAGE
; CALL GETEXB
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED COUNT OF BYTES REMAINING IN MESSAGE
; T3-T4/ BINARY NUMBER FROM MESSAGE
GETEXB::ASUBR <GEBPTR,GEBCNT>
SETZB T3,T4 ;INITIALIZE THE BINARY NUMBER AC'S
MOVEI T1,MAXEXT ;MAX # OF BYTES ACCEPTED IN EXTENSIBLE FIELDS
; LOOP OVER EACH BYTE IN THE EXTENSIBLE FIELD
GEB010: SOJL T1,[RETBAD (.NRIMF)] ;FAIL IF THERE ARE MORE THAN MAX BYTES ALLOWED
SOSGE GEBCNT ;ANOTHER BYTE LEFT IN THE MESSAGE ?
RETBAD (.NRIMF) ;NO, RETURN "INVALID MESSAGE FORMAT" ERROR
LSHC T3,7 ;YES, POSITION PREVIOUS BYTES
ILDB T2,GEBPTR ;GET NEXT BYTE FROM THE NICE MESSAGE
DPB T2,[POINT 7,T4,35] ;ADD THE BYTE TO THE BINARY NUMBER BEING FORMED
TXNE T2,EXTBIT ;IS THE NEXT BYTE PART OF THIS FIELD ?
JRST GEB010 ;YES, GO GET THE NEXT BYTE IN THE FIELD
; HERE WHEN DONE EXTRACTING BYTES - RETURN UPDATED POINTER AND COUNT
MOVE T2,GEBCNT ;GET UPDATED COUNT
MOVE T1,GEBPTR ;GET UPDATED POINTER TO NEXT FIELD
RETSKP ;DONE, RETURN SUCCESS
;GETLOC - ROUTINE TO GET A NUMBER OF LOCATIONS FROM A MOP OR NICE MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD (# OF LOCATIONS) IN MESSAGE
; T2/ COUNT OF BYTES REMAINING IN MESSAGE
; CALL GETLOC
;RETURNS: +1 FAILED, MESSAGE TOO SHORT
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED COUNT OF BYTES LEFT IN MESSAGE
; T3/ NUMBER OF LOCATIONS
GETLOC==GETTWO
;GETNOD - ROUTINE TO GET AN ASCIZ NODE NAME FROM A NICE PROTOCOL MESSAGE
;
;ACCEPTS IN T1/ POINTER TO FIRST BYTE OF NODE NAME IN NICE MESSAGE
; T2/ NUMBER OF BYTES REMAINING IN MESSAGE
; CALL GETNOD
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED BYTE COUNT
; T3/ POINTER TO ASCIZ NODE NAME STRING
GETNOD::ASUBR <NDMPTR,NDMCNT,NDMDST>
SOSGE T2 ;AT LEAST ONE BYTE LEFT IN MESSAGE ?
RETBAD (.NRIMF) ;NO, RETURN "INVALID MESSAGE FORMAT" ERROR
MOVE T4,NDMPTR ;GET POINTER TO COUNT IN ASCII IMAGE FIELD
ILDB T3,T4 ;GET NUMBER OF CHARACTERS IN NODE NAME
CAILE T3,NNAMSZ ;NAME LONGER THAN MAX ALLOWED IN NICE PROTOCOL ?
RETBAD (.NRINI) ;YES, RETURN "INVALID NODE ID" ERROR
MOVE T2,NDMCNT ;RESTORE ORIGINAL COUNT
SETZM T3 ;USE GENERAL STRING AREA
CALL GETIMA ;GO GET ASCIZ STRING FROM IMAGE FIELD
RETBAD () ;FAILED, RETURN ERROR TO CALLER
RETSKP ;RETURN SUCCESS, POINTER TO NODE NAME IS IN T3
;GETSEQ - ROUTINE TO EXTRACT THE SEQUENCE NUMBER FROM A NICE PROTOCOL
; EVENT LOGGING REQUEST MESSAGE
;
;ACCEPTS IN T1/ POINTER TO SEQUENCE NUMBER IN NICE MESSAGE
; T2/ NUMBER OF BYTES REMAINING IN NICE MESSAGE
; CALL GETSEQ
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED COUNT OF BYTES IN MESSAGE
; T3/ SEQUENCE NUMBER
GETSEQ: SOSGE T2 ;AT LEAST ONE BYTE LEFT IN MESSAGE ?
RETBAD (.NRIMF) ;NO, FAIL
ILDB T3,T1 ;YES, GET SEQUENCE NUMBER
RETSKP ;DONE, RETURN
;GETEVT - ROUTINE TO EXTRACT AN EVENT CODE FROM A NICE MESSAGE
;
;ACCEPTS IN T1/ POINTER TO EVENT CODE IN NICE MESSAGE
; T2/ NUMBER OF BYTES REMAINING IN NICE MESSAGE
; CALL GETEVT
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED COUNT OF BYTES IN MESSAGE
; T3/ EVENT CODE
GETEVT: CALLRET GETTWO ;EXTRACE A TWO-BYTE FIELD FROM MESSAGE
SUBTTL Routines to Assemble NICE Messages
;MAKLOD - ROUTINE TO ASSEMBLE A NICE LINE SERVICE MESSAGE TO INITIATE A
; DOWN LINE LOAD DIALOG.
;
;CALL: CALL MAKLOD
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ POINTER TO START OF MESSAGE
; T2/ COUNT OF NUMBER OF BYTES IN THE MESSAGE
MAKLOD: CALL CLRMSG ;GO CLEAR THE NICE MESSAGE AREA
MOVE T1,[POINT 8,MSGBLK] ;GET POINTER TO START OF NICE MESSAGE
MOVX T4,.NCLSV ;GET NICE "LINE SERVICE" FUNCTION CODE
IDPB T4,T1 ;ADD FUNCTION CODE TO MESSAGE
MOVX T4,.LSLOD ;OPTION DESIRED IS "ESTABLISH LOAD DIALOG"
IDPB T4,T1 ;ADD OPTION FIELD TO MESSAGE
MOVEI T2,2 ;MESSAGE CONTAINS TWO BYTES SO FAR
DMOVE T3,RQLLIN ;GET SERVER LINE ID
CALL MAKLIN ;ADD LINE ID TO MESSAGE
MOVE T4,RQLPGM ;GET TYPE OF PROGRAM TO BE LOADED
IDPB T4,T1 ;SAVE PROGRAM TYPE (.PTXXX) IN MESSAGE
ADDI T2,1 ;BUMP COUNT FOR PROGRAM TYPE
HRLI T1,(POINT 8,) ;FORM POINTER TO START OF THE
HRRI T1,MSGBLK ; ASSEMBLED MESSAGE
RETSKP ;DONE, RETURN SUCCESS
;MAKDMP - ROUTINE TO ASSEMBLE A NICE LINE SERVICE MESSAGE TO INITIATE AN
; UP LINE DUMP DIALOG.
;
;CALL: CALL MAKDMP
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ POINTER TO START OF MESSAGE
; T2/ COUNT OF NUMBER OF BYTES IN THE MESSAGE
MAKDMP: CALL CLRMSG ;GO CLEAR THE NICE MESSAGE AREA
MOVE T1,[POINT 8,MSGBLK] ;GET POINTER TO START OF NICE MESSAGE
MOVX T4,.NCLSV ;GET NICE "LINE SERVICE" FUNCTION CODE
IDPB T4,T1 ;ADD FUNCTION CODE TO MESSAGE
MOVX T4,.LsdmP ;OPTION DESIRED IS "ESTABLISH LOAD DIALOG"
IDPB T4,T1 ;ADD OPTION FIELD TO MESSAGE
MOVEI T2,2 ;MESSAGE CONTAINS TWO BYTES SO FAR
DMOVE T3,RQDLIN ;GET SERVER LINE ID
CALL MAKLIN ;ADD LINE ID TO MESSAGE
MOVE T2,RQDADR ;GET STARTING ADDRESS FOR DUMP
CALL MAK4 ;GO ADD FOUR-BYTE FIELD TO MESSAGE
MOVE T2,RQDCNT ;GET COUNT OF LOCATIONS TO DUMP
CALL MAK4 ;GO ADD COUNT TO DUMP MESSAGE
MOVEI T2,^D15 ;GET NUMBER OF BYTES IN DUMP MESSAGE
HRLI T1,(POINT 8,) ;FORM POINTER TO START OF
HRRI T1,MSGBLK ; NICE LINE SERVICE MESSAGE
RETSKP ;DONE, RETURN SUCCESS
;MAKRLC - ROUTINE TO ASSEMBLE A NICE READ LINE COUNTERS MESSAGE
;
;ACCEPTS IN T1-T2/ NICE LINE ID FOR WHICH COUNTERS ARE DESIRED
; CALL MAKRLC
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ POINTER TO START OF MESSAGE
; T2/ NUMBER OF BYTES IN THE MESSAGE
MAKRLC: ASUBR <<MRLLIN,2>>
CALL CLRMSG ;GO CLEAR THE NICE MESSAGE AREA
MOVE T1,[POINT 8,MSGBLK] ;GET POINTER TO START OF MESSAGE
MOVX T4,.NCRED ;GET NICE "READ INFORMATION" FUNCTION CODE
IDPB T4,T1 ;ADD FUNCTION CODE TO MESSAGE
MOVX T4,.RDLCT ;GET "LINE COUNTERS" OPTION FOR READ FUNCTION
IDPB T4,T1 ;ADD OPTION TO MESSAGE
MOVEI T2,2 ;GET NUMBER OF BYTES IN MESSAGE SO FAR
DMOVE T3,MRLLIN ;GET LINE FOR WHICH COUNTERS ARE DESIRED
CALL MAKLIN ;GO ADD LINE ID TO MESSAGE
HRLI T1,(POINT 8,) ;FORM POINTER TO NICE "READ INFORMATION"
HRRI T1,MSGBLK ; MESSAGE TO GET LINE COUNTERS
RETSKP ;DONE, RETURN SUCCESS
;MAKLIN - ROUTINE TO ASSEMBLE A STANDARD LINE ID INTO A MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD IN MESSAGE
; T2/ NUMBER OF BYTES ALREADY IN THE MESSAGE
; T3-T4/ STANDARD LINE ID:
; T3/ LINE DEVICE TYPE (.DTXXX),,LINE CONTROLLER #
; T4/ LINE UNIT NUMBER,,LINE STATION ADDRESS
; CALL MAKLIN
;RETURNS: +1 ALWAYS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED COUNT OF BYTES IN THE MESSAGE
MAKLIN::ASUBR <MLNPTR>
MOVX T1,.LTSTD ;GET STANDARD LINE TYPE CODE
IDPB T1,MLNPTR ;ADD LINE ID TYPE CODE TO MESSAGE
HLRZ T1,T3 ;GET LINE DEVICE TYPE
IDPB T1,MLNPTR ;ADD TO MESSAGE
HRRZ T1,T3 ;GET CONTROLLER NUMBER
IDPB T1,MLNPTR ;ADD TO MESSAGE
HLRZ T1,T4 ;GET UNIT NUMBER
IDPB T1,MLNPTR ;ADD TO MESSAGE
HRRZ T1,T4 ;GET STATION ADDRESS
IDPB T1,MLNPTR ;ADD TO MESSAGE
ADDI T2,5 ;INCREMENT BYTE COUNT
MOVE T1,MLNPTR ;RESTORE UPDATED POINTER
RET ;RETURN, FIELD ADDED TO MESSAGE
;MAKMPL - ROUTINE TO MAKE A MOP LOAD-WITHOUT-TRANSFER-ADDRESS MESSAGE (.MPLOD)
;
;ACCEPTS IN T1/ POINTER TO MEMORY IMAGE DATA IN NICE LINE SERVICE DIALOG MSG
; T2/ NUMBER OF BYTES IN REMAINDER OF NICE MESSAGE
; T3/ ADDRESS OF LINE TABLE
; CALL MAKMPL
;RETURNS: +1 FAILED, UNEXPECTED NICE PROCESS PROGRAM ERROR
; +2 SUCCESS, WITH T1/ POINTER TO COMPLETED MOP MESSAGE
; T2/ NUMBER OF BYTES IN THE MOP MESSAGE
MAKMPL: ASUBR <MMLPTR,MMLCNT,MMLLIN>
; PUT THE FUNCTION CODE, LOAD NUMBER, AND LOAD ADDRESS INTO THE MESSAGE
CALL CLRMOP ;GO CLEAR THE MOP MESSAGE AREA
MOVE T4,MMLLIN ;GET ADDRESS OF LINE TABLE
LOAD T1,LNMSG,(T4) ;GET POINTER TO WHERE MOP MESSAGE GOES
MOVX T2,.MPLOD ;GET MOP FUNCTION CODE
IDPB T2,T1 ;STORE FUNCTION CODE IN MOP MESSAGE
MOVE T4,MMLLIN ;GET ADDRESS OF LINE TABLE
LOAD T2,LNLDN,(T4) ;GET NEXT LOAD NUMBER TO USE
IDPB T2,T1 ;STORE LOAD NUMBER IN MOP MESSAGE
LOAD T2,LNADR,(T4) ;GET LOAD ADDRESS
CALL MAK4 ;GO ADD A FOUR-BYTE NUMBER TO THE MOP MESSAGE
; ADD THE MEMORY IMAGE DATA TO THE MOP MESSAGE
MOVE T2,MMLPTR ;GET POINTER TO LOAD RECORD
MOVN T3,MMLCNT ;GET -NUMBER OF BYTES IN LOAD RECORD
SOUT ;ADD THE LOAD RECORD TO THE MOP MESSAGE
ERJMP R ;SHOULD NOT FAIL
MOVE T4,MMLLIN ;GET ADDRESS OF LINE TABLE
LOAD T3,LNADR,(T4) ;GET PREVIOUS ADDRESS
MOVE T2,MMLCNT ;GET PREVIOUS MESSAGE SIZE
ADD T3,T2 ;COMPUTE NEXT LOAD ADDRESS
STOR T3,LNADR,(T4) ;STORE NEW ADDRESS
ADDI T2,6 ;ACCOUNT FOR MOP FUNCTION, LOAD #, ADDRESS
STOR T2,LNCNT,(T4) ;STORE COUNT IN LINE TABLE
LOAD T1,LNMSG,(T4) ;GET POINTER TO START OF MESSAGE
RETSKP ;RETURN (POINTER IS STILL IN T1)
;MAKBAS - ROUTINE TO ASSEMBLE A NICE LINE SERVICE "SET BASE ADR" MESSAGE
;
;ACCEPTS IN T1/ MEMORY ADDRESS TO BE SET
; CALL MAKBAS
;RETURNS: +1 ALWAYS, WITH T1/ POINTER TO START OF MESSAGE
; T2/ NUMBER OF BYTES IN THE MESSAGE
MAKBAS: ASUBR <MBSADR>
CALL CLRMSG ;GO ZERO THE MESSAGE AREA
MOVE T1,[POINT 8,MSGBLK] ;GET POINTER TO START OF MESSAGE
MOVX T4,.LMBAS ;GET LOAD DIALOG MESSAGE "SET BASE ADR" OPTION
IDPB T4,T1 ;ADD OPTION BYTE TO MESSAGE
MOVE T2,MBSADR ;GET ADDRESS TO BE SET
CALL MAK4 ;GO ADD THE ADDRESS TO THE MESSAGE
HRLI T1,(POINT 8,) ;FORM POINTER TO THE START OF THE
HRRI T1,MSGBLK ; NICE LINE SERVICE "SET BASE ADR" MESSAGE
MOVX T2,5 ;GET SIZE OF MESSAGE
RET ;DONE, RETURN
;MAKMLP - ROUTINE TO ASSEMBLE A MOP "LOAD PARAMETERS AND TRANSFER" MESSAGE
;
;ACCEPTS IN T1/ ADDRESS OF LINE TABLE
; T2/ ADDRESS AT WHICH TO START LOADED PROGRAM
; CALL MAKMLP
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ POINTER TO START OF MOP MESSAGE
; T2/ NUMBER OF BYTES IN THE MOP MESSAGE
MAKMLP: ASUBR <MLPLIN,MLPADR,MLPCNT>
CALL CLRMOP ;GO CLEAR THE MOP MESSAGE AREA
MOVE T4,MLPLIN ;GET ADDRESS OF LINE TABLE
LOAD T1,LNMSG,(T4) ;GET POINTER TO START OF MESSAGE
MOVX T4,.MPXFR ;GET MOP "PARAMETERS AND TRANSFER" CODE
IDPB T4,T1 ;PUT MOP FUNCTION CODE INTO THE MESSAGE
MOVE T4,MLPLIN ;GET ADDRESS OF LINE TABLE
LOAD T4,LNLDN,(T4) ;GET NEXT LOAD NUMBER
IDPB T4,T1 ;ADD LOAD NUMBER TO MESSAGE
MOVEI T4,2 ;GET NUMBER OF BYTES IN MESSAGE SO FAR
MOVEM T4,MLPCNT ;SAVE MESSAGE SIZE
; ADD NODE-NAME PARAMETER IF SPECIFIED
MOVE T3,RQLNAM ;GET POINTER TO NAME PARAMETER
CAMN T3,[-1] ;WAS THIS PARAMETER SPECIFIED ?
JRST MLP010 ;NO, GO CHECK NEXT PARAMETER
MOVX T4,.PVNAM ;YES, GET "NODE NAME" PARAMETER TYPE CODE
IDPB T4,T1 ;ADD TYPE CODE TO MESSAGE
AOS MLPCNT ;INCREMENT BYTE COUNT
MOVX T2,NNAMSZ ;GET MAX SIZE OF A NODE NAME
CALL MAKIMA ;GO ADD IMAGE ASCII FIELD TO MOP MESSAGE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
ADDM T2,MLPCNT ;ADD NUMBER OF BYTES IN NAME TO MESSAGE SIZE
; ..
; ..
; HERE TO ADD THE NODE NUMBER IF SPECIFIED
MLP010: MOVE T2,RQLNUM ;GET NODE NUMBER
CAMN T2,[-1] ;WAS THE NODE NUMBER SPECIFIED ?
JRST MLP020 ;NO, GO CHECK THE NEXT PARAMETER
MOVX T3,.PVNUM ;YES, GET "NODE NUMBER" PARAMETER TYPE CODE
IDPB T3,T1 ;ADD PARAMETER TYPE TO MOP MESSAGE
MOVX T3,2 ;GET SIZE OF NODE NUMBER PARAMETER FIELD
IDPB T3,T1 ;ADD COUNT TO MOP MESSAGE
MOVEI T3,4 ;GET # OF BYTES IN NODE-NUMBER PARAMETER FIELD
ADDM T3,MLPCNT ;INCREMENT TOTAL SIZE OF MOP MESSAGE
CALL MAKTWO ;GO ADD 2-BYTE NODE NUMBER TO MOP MESSAGE
; HERE TO ADD HOST-NODE PARAMETER IF SPECIFIED
MLP020: MOVE T3,RQLHST ;GET POINTER TO HOST PARAMETER
CAMN T3,[-1] ;WAS THIS PARAMETER SPECIFIED ?
JRST MLP030 ;NO, GO ON
MOVX T4,.PVHST ;YES, GET "HOST" PARAMETER TYPE CODE
IDPB T4,T1 ;ADD TYPE CODE TO MESSAGE
AOS MLPCNT ;INCREMENT BYTE COUNT
MOVX T2,NNAMSZ ;GET MAX SIZE OF A NODE NAME
CALL MAKIMA ;GO ADD IMAGE ASCII FIELD TO MOP MESSAGE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
ADDM T2,MLPCNT ;ADD NUMBER OF BYTES IN NAME TO MESSAGE SIZE
; HERE TO ADD TRANSFER ADDRESS TO THE MESSAGE
MLP030: MOVX T4,.PVEND ;GET "END-OF-PARAMETERS" CODE
IDPB T4,T1 ;ADD END MARK TO MOP MESSAGE
AOS MLPCNT ;INCREMENT MESSAGE SIZE
MOVE T2,MLPADR ;GET TRANSFER ADDRESS
CALL MAK4 ;ADD A FOUR-BYTE ADDRESS TO THE MOP MESSAGE
MOVE T2,MLPCNT ;GET MESSAGE SIZE
ADDI T2,4 ;INCREMENT FOR TRANSFER ADDRESS
MOVE T4,MLPLIN ;GET ADDRESS OF LINE TABLE
STOR T2,LNCNT,(T4) ;STORE COUNT IN TABLE
LOAD T1,LNMSG,(T4) ;GET POINTER TO START OF MESSAGE
RETSKP ;DONE, RETURN SUCCESS TO CALLER
;MAKIMD - ROUTINE TO ASSEMBLE A NICE MEMORY IMAGE MESSAGE FOR USE DURING
; A DUMP DIALOG.
;
;ACCEPTS IN T1/ ADDRESS OF DATA TO RETURN (8 BIT BYTES)
; T2/ COUNT OF BYTES TO RETURN
; CALL MAKIMD
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ POINTER TO MESSAGE
; T2/ NUMBER OF BYTES IN THE MESSAGE
MAKIMD: ASUBR <MIDADR,MIDCNT,MIDNUM>
MOVEM T2,MIDNUM ;SAVE ORIGINAL NUMBER OF BYTES
CALL CLRMSG ;INITIALIZE THE MESSAGE AREA
HRLI T1,(POINT 8,) ;FORM POINTER TO DESTINATION FOR
HRRI T1,MSGBLK ; "MEMORY IMAGE" MESSAGE
MOVX T4,.LMMEM ;GET "MEMORY IMAGE" TYPE CODE
IDPB T4,T1 ;STORE TYPE CODE IN LINE SERVICE MESSAGE
MOVX T4,.CP11 ;GET CPU TYPE OF TARGET SYSTEM
IDPB T4,T1 ;SAVE CPU TYPE IN MESSAGE
MOVE T3,MIDADR ;GET ADDRESS OF DATA TO RETURN
SKIPN MIDCNT ;NON-ZERO COUNT ?
JRST MID040 ;NO, ALL DONE
MOVEI T2,0 ;START WITH FIRST BYTE
ANDI T2,3 ;MODULO 4
MID020: LDB T4,SLDTAB(T2) ;GET A DATA BYTE
IDPB T4,T1 ;ADD BYTE TO THE MESSAGE
ADDI T2,1 ;POINT TO NEXT BYTE POINTER
ANDI T2,3 ;KEEP JUST RIGHTMOST 2 BITS
TRNN T2,3 ;DONE FOUR BYTES YET ?
ADDI T3,1 ;YES, POINT TO NEXT WORD
SOSLE MIDCNT ;DECREMENT NUMBER OF BYTES REMAINING TO BE MOVED
JRST MID020 ;LOOP OVER ALL BYTES TO MOVE
MID040: MOVE T2,MIDNUM ;GET NUMBER OF DATA BYTES AGAIN
ADDI T2,2 ;ACCOUNT FOR TYPE CODE AND CPU TYPE
HRLI T1,(POINT 8,) ;FORM POINTER TO DESTINATION FOR
HRRI T1,MSGBLK ; "MEMORY IMAGE" MESSAGE
RETSKP ;DONE, RETURN SUCCESS
;MAKMDT - ROUTINE TO ASSEMBLE A NICE MEMORY IMAGE MESSAGE FOR USE DURING
; A DUMP DIALOG.
;
;ACCEPTS IN T1/ ADDRESS OF DATA TO RETURN (8 BIT BYTES)
; T2/ COUNT OF BYTES TO RETURN
; T3/ NUMBER OF BYTES ALREADY EXTRACTED FROM MSG (MAKMDT ONLY)
; CALL MAKMDT
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ POINTER TO MESSAGE
; T2/ NUMBER OF BYTES IN THE MESSAGE
MAKMDT: ASUBR <MDTADR,MDTNUM,MDTCNT>
CALL CLRMSG ;INITIALIZE THE MESSAGE AREA
HRLI T1,(POINT 8,) ;FORM POINTER TO DESTINATION FOR
HRRI T1,MSGBLK ; "MEMORY IMAGE" MESSAGE
MOVX T4,.LMMEM ;GET "MEMORY IMAGE" TYPE CODE
IDPB T4,T1 ;STORE TYPE CODE IN LINE SERVICE MESSAGE
MOVX T4,.CP11 ;GET CPU TYPE OF TARGET SYSTEM
IDPB T4,T1 ;SAVE CPU TYPE IN MESSAGE
MOVE T3,MDTADR ;GET ADDRESS OF DATA TO RETURN
HRLI T3,(POINT 8,) ;FORM POINTER TO DATA TO RETURN
SKIPN MDTCNT ;NON-ZERO COUNT ?
JRST MDT040 ;NO, ALL DONE
MDT020: ILDB T4,T3 ;GET A DATA BYTE
IDPB T4,T1 ;ADD BYTE TO THE MESSAGE
SOSLE MDTCNT ;DECREMENT NUMBER OF BYTES REMAINING TO BE MOVED
JRST MDT020 ;LOOP OVER ALL BYTES TO MOVE
MDT040: MOVE T2,MDTNUM ;GET NUMBER OF DATA BYTES AGAIN
ADDI T2,2 ;ACCOUNT FOR TYPE CODE AND CPU TYPE
HRLI T1,(POINT 8,) ;FORM POINTER TO DESTINATION FOR
HRRI T1,MSGBLK ; "MEMORY IMAGE" MESSAGE
RETSKP ;DONE, RETURN SUCCESS
;MAKIMG - ROUTINE TO ASSEMBLE A "MEMORY IMAGE" LINE SERVICE MESSAGE
;
;ACCEPTS IN T1/ ADDRESS OF RECORD BLOCK
; T2/ CPU TYPE OF TARGET SYSTEM (.CPXXX)
; CALL MAKIMG
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ POINTER TO START OF MESSAGE
; T2/ NUMBER OF BYTES IN THE MESSAGE
MAKIMG: ASUBR <MIMREC,MIMCPU,MIMCNT>
CALL CLRMSG ;INITIALIZE THE MESSAGE AREA
HRLI T1,(POINT 8,) ;FORM POINTER TO DESTINATION FOR
HRRI T1,MSGBLK ; "MEMORY IMAGE" MESSAGE
MOVX T4,.LMMEM ;GET "MEMORY IMAGE" TYPE CODE
IDPB T4,T1 ;STORE TYPE CODE IN LINE SERVICE MESSAGE
MOVE T4,MIMCPU ;GET CPU TYPE OF TARGET SYSTEM
IDPB T4,T1 ;SAVE CPU TYPE IN MESSAGE
MOVE T4,MIMREC ;GET ADDRESS OF RECORD BLOCK
LOAD T3,RBCNT,(T4) ;GET NUMBER OF BYTES IN THIS BLOCK
CAIL T3,MAXMEM ;MORE TO SEND THAN MAX IN ONE IMAGE FIELD ?
MOVX T3,MAXMEM ;YES, USE MAXIMUM INSTEAD
MOVEM T3,MIMCNT ;SAVE # OF BYTES ACTUALY BEING SENT
MOVN T3,T3 ;GET - COUNT
LOAD T2,RBPTR,(T4) ;GET POINTER TO THE DATA
SOUT ;ADD THE DATA TO THE MESSAGE
ERJMP [RETBAD (.NRNPE)] ;FAILED, RETURN ERROR
STOR T2,RBPTR,(T4) ;STORE POINTER IN CASE THERE IS MORE DATA
MOVE T2,MIMCNT ;GET # OF DATA BYTES IN MESSAGE
LOAD T3,RBCNT,(T4) ;GET TOTAL # OF BYTES TO BE SENT
SUB T3,MIMCNT ;COMPUTE # OF BYTES LEFT TO SEND
STOR T3,RBCNT,(T4) ;SAVE THAT NUMBER OF BYTES IN RECORD BLOCK
MOVE T2,MIMCNT ;GET NUMBER OF DATA BYTES ACTUALLY IN MESSAGE
ADDI T2,1+1 ;ADD 1 FOR FUNCTION CODE, 1 FOR CPU TYPE
HRLI T1,(POINT 8,) ;FORM POINTER TO START OF
HRRI T1,MSGBLK ; "MEMORY IMAGE" MESSAGE
RETSKP ;DONE, RETURN SUCCESS
;MAKXFR -ROUTINE TO ASSEMBLE A "SYSTEM PARAMETERS AND TRANSFER" MESSAGE
;
;ACCEPTS IN T1/ ADDRESS OF RECORD BLOCK
; CALL MAKXFR
;RETURNS: +1 ALWAYS, WITH T1/ POINTER TO START OF MESSAGE
; T2/ NUMBER OF BYTES IN THE MESSAGE
MAKXFR: ASUBR <MKXREC,MKXPTR,MKXCNT>
SETZM MKXCNT ;INITIALIZE MESSAGE SIZE
CALL CLRMSG ;GO CLEAR THE MESSAGE AREA
MOVE T1,[POINT 8,MSGBLK] ;GET POINTER TO START OF MESSAGE
MOVX T4,.LMXFR ;GET "TRANSFER" LINE SERVICE MESSAGE TYPE
IDPB T4,T1 ;ADD MESSAGE TYPE TO THE MESSAGE
; SKIP OVER COUNT BYTE AND ADD PARAMETERS TO THE MESSAGE
MOVEM T1,MKXPTR ;SAVE POINTER TO TOTAL COUNT FOR PARAMETERS
IBP T1 ;SKIP THE COUNT BYTE
SKIPN T3,RQLNAM ;NAME OF THIS NODE SPECIFIED ?
JRST MKX010 ;NO, GO CHECK NODE NUMBER
CAMN T3,[-1] ;IF PARAMETER NOT SPECIFIED, GO CHECK
JRST MKX010 ; NEXT PARAMETER
MOVX T2,.PVNAM ;GET PARAMETER TYPE CODE FOR NODE NAME
IDPB T2,T1 ;ADD TYPE CODE TO MESSAGE
AOS MKXCNT ;INCREMENT COUNT OF BYTES IN PARAMETERS
MOVX T2,NNAMSZ ;GET MAX NUMBER OF CHARACTERS IN NODE NAMES
CALL MAKIMA ;GO ADD NODE NAME TO MESSAGE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
ADDM T2,MKXCNT ;UPDATE NUMBER OF BYTES IN PARAMETERS
MKX010: SKIPN T4,RQLNUM ;NODE NUMBER SPECIFIED ?
JRST MKX020 ;NO, GO CHECK HOST FOR TASK LOADS
CAMN t4,[-1] ;IF PARAMETER NOT SPECIFIED, GO CHECK
JRST MKX020 ; NEXT PARAMETER
MOVX T2,.PVNUM ;YES, GET PARAMETER TYPE CODE FOR NODE NUMBER
IDPB T2,T1 ;ADD TYPE CODE TO THE MESSAGE
MOVEI T2,4 ;ACCOUNT FOR THE PARAMETER TYPE CODE, COUNT
ADDM T2,MKXCNT ; BYTE, AND TWO BYTES OF NODE NUMBER
MOVX T2,2 ;NODE NUMBER IS TWO BYTES
SETZM T3 ;NUMBER IS ALREADY IN T4
CALL MAKIMB ;GO ASSEMBLE THE NODE NUMBER INTO THE MESSAGE
MKX020: SKIPN T3,RQLHST ;ANY HOST SPECIFIED FOR TASK LOADS ?
JRST MKX030 ;NO, GO ADD TOTAL LENGTH OF PARAMETER FIELD
CAMN T3,[-1] ;IF PARAMETER NOT SPECIFIED, GO
JRST MKX030 ; ADD ADDRESS TO MESSAGE
MOVX T2,.PVHST ;YES, GET HOST PARAMETER TYPE CODE
IDPB T2,T1 ;ADD PARAMETER TYPE CODE TO MESSAGE
AOS MKXCNT ;UPDATE BYTE COUNT FOR PARAMETERS
MOVX T2,NNAMSZ ;YES, GET MAX SIZE OF NODE NAMES
CALL MAKIMA ;GO ADD ASCII HOST NAME TO MESSAGE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
ADDM T2,MKXCNT ;UPDATE NUMBER OF BYTES IN PARAMETERS
; ..
; ..
MKX030: MOVX T4,.PVEND ;GET "END-OF-PARAMETERS" MARK
IDPB T4,T1 ;MARK END OF PARMAETERS
AOS T2,MKXCNT ;INCREMENT COUNT OF BYTES FOR PARAMETERS
IDPB T2,MKXPTR ;STORE AS FIRST BYTE OF PARAMETER FIELD
; HERE TO ADD THE TRANSFER ADDRESS TO THE MESSAGE
MOVE T4,MKXREC ;GET ADDRESS OF RECORD BLOCK
LOAD T2,RBXAD,(T4) ;GET TRANSFER ADDRESS FROM FILE
CALL MAK4 ;GO ASSEMBLE A FOUR-BYTE NUMBER
; MESSAGE IS NOW ASSMBLED - RETURN
HRRI T1,MSGBLK ;GET ADDRESS OF MESSAGE
HRLI T1,(POINT 8,) ;FORM POINTER TO START OF MESSAGE
MOVE T2,MKXCNT ;GET NUMBER OF BYTES IN PARAMETERS
ADDI T2,1+1+4 ;ADD TYPE CODE, PARAMS CNT, AND XFR ADR COUNT
RETSKP ;RETURN TO CALLER
;MAKRQD - ROUTINE TO MAKE A MOP "REQUEST DUMP RECORD" MESSAGE
;
;ACCEPTS IN T1/ MEMORY ADDRESS TO START DUMPING
; T2/ NUMBER OF LOCATIONS TO DUMP
; T3/ DESTINATION POINTER FOR NICE MESSAGE
; CALL MAKRQD
;RETURNS: +1 ALWAYS, WITH T1/ POINTER TO MOP MESSAGE
; T2/ NUMBER OF BYTES IN MOP MESSAGE
MAKRQD: ASUBR <MRDADR,MRDCNT,MRDPTR>
MOVE T1,MRDPTR ;GET POINTER TO DESTINATION OF MESSAGE
MOVX T4,.MPRQD ;GET MOP "REQUEST DUMP RECORD" FUNCTION CODE
IDPB T4,T1 ;PUT FUNCTION CODE INTO MOP MESSAGE
MOVE T2,MRDADR ;GET ADDRESS FROM WHICH TO BEGIN DUMPING
CALL MAK4 ;GO ADD THE ADDRESS TO THE MOP MESSAGE
MOVE T2,MRDCNT ;GET NUMBER OF LOCATIONS TO DUMP
CALL MAKTWO ;GO ADD COUNT TO THE MOP MESSAGE
MOVE T1,[POINT 8,MOPMSG] ;GET POINTER TO START OF MOP MESSAGE
MOVEI T2,7 ;GET NUMBER OF BYTES IN "REQUEST DUMP" MESSAGE
RET ;RETURN
;MAKEMM - ROUTINE TO MAKE A MOP "ENTER MOP MODE" MESSAGE
;
;ACCEPTS IN T1/ MAINTENANCE PASSWORD
; CALL MAKEMM
;RETURNS: +1 ALWAYS, WITH T1/ POINTER TO MOP MESSAGE
; T2/ NUMBER OF BYTES IN MOP MESSAGE
MAKEMM: ASUBR <MEMPSW>
CALL CLRMOP ;CLEAR THE MOP MESSAGE AREA
MOVE T1,[POINT 8,MOPMSG] ;GET POINTER TO START OF MOP MESSAGE AREA
MOVX T4,.MPMOP ;GET "ENTER MOP MODE" MOP FUNCTION CODE
IDPB T4,T1 ;PUT FUNCTION CODE INTO MESSAGE
MOVE T2,MEMPSW ;GET MAINTENANCE PASSWORD
CALL MAK4 ;ADD MAINTENANCE PASSWORD TO MESSAGE
MOVEI T2,5 ;GET SIZE OF "ENTER MOP MODE" MESSAGE
MOVE T1,[POINT 8,MOPMSG] ;GET POINTER TO START OF MESSAGE
RET ;RETURN
;MAKEND - ROUTINE TO CHECK A MOP PROGRAM REQUEST MESSAGE AND ASSEMBLE A
; NICE END-OF-DIALOG LINE SERVICE MESSAGE.
;
;ACCEPTS IN T1/ POINTER TO START OF MOP MESSAGE
; T2/ NUMBER OF BYTES IN THE MOP MESSAGE
; T3/ ADDRESS OF LINE TABLE
; CALL MAKEND
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ POINTER TO START OF NICE MESSAGE
; T2/ NUMBER OF BYTES IN THE NICE MESSAGE
MAKEND: ASUBR <MKDPTR,MKDCNT,MKDLIN>
CALL CLRMSG ;GO CLEAR THE NICE MESSAGE AREA
MOVE T1,MKDCNT ;GET # OF BYTES IN THE MOP MESSAGE
SUBI T1,4 ;AT LEAST FUNCTION, DEVICE, PROGRAM & STATION ?
JUMPN T1,[RETBAD (.NRPRO)] ;IF NOT, RETURN "PROTOCOL ERROR"
MOVEM T1,MKDCNT ;SAVE UPDATED COUNT
MOVE T4,[POINT 8,MSGBLK] ;GET POINTER TO START OF NICE MESSAGE
MOVX T1,.LMEND ;GET END-OF-DIALOG TYPE CODE
IDPB T1,T4 ;ADD TYPE CODE TO NICE LINE SERVICE MESSAGE
MOVX T1,.NRSUC ;GET SUCCESS RETURN CODE
IDPB T1,T4 ;ADD RETURN CODE TO THE MESSAGE
; EXTRACT THE FUNCTION CODE, DEVICE TYPE, AND STATION FROM MOP MESSAGE
ILDB T1,MKDPTR ;GET MOP FUNCTION CODE
CAIE T1,.MPRQP ;REQUEST PROGRAM FUNCTION ?
RETBAD (.NRPRO) ;NO, RETURN "PROTOCOL ERROR"
ILDB T1,MKDPTR ;GET LOAD DEVICE TYPE (.DTXXX)
CAIE T1,.DTDTE ;DTE20 ?
RETBAD (.NRPRO) ;NO, RETURN "PROTOCOL ERROR"
IDPB T1,T4 ;YES, STORE DEVICE TYPE IN NICE MESSAGE
MOVX T1,.CP11 ;ADJACENT NODES ARE ALWAYS PDP-11'S FOR NOW
IDPB T1,T4 ;ADD CPU TYPE TO NICE MESSAGE
ILDB T1,MKDPTR ;GET STATION ADDRESS FROM MOP MESSAGE
CAIE T1,1 ;STATION 1 ?
RETBAD (.NRPRO) ;NO, RETURN "PROTOCOL ERROR"
ILDB T1,MKDPTR ;YES, GET PROGRAM TYPE FROM MOP MESSAGE
CAIL T1,.PTSLD ;VALID PROGRAM TYPE
CAILE T1,.PTOPS ; IN THE MOP PROGRAM REQUEST MESSAGE ?
RETBAD (.NRPRO) ;NO, RETURN "PROTOCOL ERROR"
IDPB T1,T4 ;YES, ADD PROGRAM TYPE TO NICE MESSAGE
MOVE T2,MKDLIN ;GET ADDRESS OF LINE TABLE
STOR T1,LNPGM,(T2) ;UPDATE TYPE OF PROGRAM BEING LOADED
; ..
; ..
; EXTRACT THE SOFTWARE ID FROM THE MOP MESSAGE
SKIPG T2,MKDCNT ;ANY MORE BYTES LEFT IN MOP MESSAGE ?
JRST MKD020 ;NO, GO RETURN POINTER TO NICE MESSAGE
CAILE T2,MSIDMX ;BIGGER THAN MAX SIZE OF MOP SOFTWARE ID FIELD ?
RETBAD (.NRPRO) ;YES, PROTOCOL ERROR
MOVE T3,[POINT 7,TMPSTR] ;SET UP POINTER TO TEMPORARY DESTINATION
MKD010: SOJL T2,MKD020 ;IF ALL BYTES NOW IN STRING, GO ADD TO NICE MSG
ILDB T1,MKDPTR ;GET NEXT CHARACTER FROM MOP MESSAGE
IDPB T1,T3 ;ADD CHARACTER TO STRING BEING FORMED
JRST MKD010 ;LOOP OVER ALL BYTES IN THE SOFTWARE ID
; HERE WITH SOFTWARE ID EXTRACTED
MKD020: MOVE T3,[POINT 7,TMPSTR] ;GET POINTER TO TEMP LOCATION OF STRING
MOVE T1,T4 ;COPY POINTER TO NEXT FIELD IN NICE MESSAGE
CALL MAKIMA ;GO ADD IMAGE ASCII SOFTWARE ID TO NICE MESSAGE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
; RETURN THE POINTER AND SIZE OF THE NICE END-OF-DIALOG LINE SERVICE MESSAGE
MOVE T1,[POINT 8,MSGBLK] ;GET POINTER TO START OF MESSAGE
ADDI T2,5 ;INCREMENT COUNT FOR TYPE CODE, DEV, CPU, PGM
RETSKP ;DONE, RETURN SUCCESS
;MAKMPT - ROUTINE TO MAKE A MOP LOAD-WITH-TRANSFER-ADDRESS MESSAGE (.MPLDT)
;
;ACCEPTS IN T3/ LOAD NUMBER FOR THIS MESSAGE
; T4/ TRANSFER ADDRESS FOR THIS RECORD
; CALL MAKMPT
;RETURNS: +1 ALWAYS, WITH T1/ POINTER TO COMPLETED MOP MESSAGE
MAKMPT: STKVAR <MMTLOD,MMTADR>
MOVEM T3,MMTLOD ;SAVE LOAD NUMBER
MOVEM T4,MMTADR ;SAVE LOAD ADDRESS
; PUT THE FUNCTION CODE AND LOAD NUMBER INTO THE MESSAGE
CALL CLRMOP ;GO CLEAR THE MOP MESSAGE AREA
MOVE T4,[POINT 8,MOPMSG] ;GET POINTER TO WHERE MOP MESSAGE GOES
MOVX T1,.MPLDT ;GET MOP FUNCTION CODE
IDPB T1,T4 ;STORE FUNCTION CODE IN MOP MESSAGE
MOVE T1,MMTLOD ;GET THE LOAD NUMBER FOR THIS RECORD
IDPB T1,T4 ;STORE LOAD NUMBER IN MOP MESSAGE
MOVE T1,T4 ;GET POINTER TO NEXT FIELD IN MOP MESSAGE
MOVE T2,MMTADR ;GET TRANSFER ADDRESS
CALL MAK4 ;GO ADD A FOUR-BYTE NUMBER TO THE MOP MESSAGE
MOVEI T2,6 ;GET NUMBER OF BYTES IN MESSAGE SO FAR
MOVE T1,[POINT 8,MOPMSG] ;GET POINTER TO MOP LOAD MESSAGE
RET ;RETURN
;MAKMRL - ROUTINE TO MAKE A MOP "REQUEST LOAD RECORD" MESSAGE
;
;ACCEPTS IN T1/ LOAD NUMBER BEING REQUESTED
; T2/ MOP RESPONSE CODE
; CALL MAKMRL
;RETURNS: +1 ALWAYS, WITH T1/ POINTER TO MOP MESSAGE
; T2/ # OF BYTES IN MOP MESSAGE
MAKMRL: ASUBR <MRLLOD,MRLCOD>
CALL CLRMOP ;GO CLEAR THE MOP MESSAGE AREA
MOVE T4,[POINT 8,MOPMSG] ;GET A POINTER TO THE MESSAGE
MOVX T1,.MPRQL ;GET "REQUEST LOAD" MOP FUNCTION CODE
IDPB T1,T4 ;PUT FUNCTION CODE INTO MESSAGE
MOVE T1,MRLLOD ;GET LOAD NUMBER BEING REQUESTED
IDPB T1,T4 ;ADD LOAD NUMBER TO MESSAGE
MOVE T1,MRLCOD ;GET RESPONSE CODE
IDPB T1,T4 ;STORE RESPONSE CODE IN MESSAGE
MOVE T1,[POINT 8,MOPMSG] ;GET POINTER TO START OF MOP MESSAGE
MOVEI T2,3 ;GET NUMBER OF BYTES IN MOP MESSAGE
RET ;RETURN
;MAKRQL - ROUTINE TO ASSEMBEL A NICE DOWN LINE LOAD REQUEST MESSAGE
;
;ACCEPTS IN T1/ ADDRESS OF LINE TABLE
; CALL MAKRQL
;RETURNS: +1 FAILED
; +2 SUCCESS, WITH T1/ POINTER TO START OF MESSAGE
; T2/ COUNT OF BYTES IN THE MESSAGE
MAKRQL: ASUBR <MQLLIN>
STKVAR <<MQLLID,2>,MQLCNT>
; GET AND SAVE THE NICE LINE ID FOR THIS DTE20
MOVE T1,MQLLIN ;GET LINE TABLE
LOAD T1,LNDTE,(T1) ;GET DTE20 NUMBER
CALL CVTDEV ;CONVERT TO STANDARD NICE LINE ID
RETBAD () ;FAILED
DMOVEM T2,MQLLID ;SAVE LINE ID
; ASSEMBLE THE FUNCTION AND OPTION CODES
CALL CLRMSG ;GO CLEAR THE NICE MESSAGE AREA
MOVE T1,[POINT 8,MSGBLK] ;GET POINTER TO START OF NICE MESSAGE
MOVX T4,.NCRQL ;GET NICE "REQUEST DOWN LINE LOAD" FUNCTION
IDPB T4,T1 ;ADD TO MESSAGE
MOVX T4,<FLD(LO%TGT,.LOSRV)+FLD(LO%ROM,.LOPGM)>
IDPB T4,T1 ;ADD OPTIONS TO NICE MESSAGE
; ADD THE SERVER NODE NAME AND SERVER LINE ID TO THE MESSAGE
MOVX T2,2 ;CURRENT COUNT OF BYTES IN MESSAGE
MOVE T3,OURNAM ;GET POINTER TO OUR NODE NAME
CALL MAKNOD ;ADD OUR NODE NAME TO MESSAGE
DMOVE T3,MQLLID ;GET NICE LINE ID
CALL MAKLIN ;ADD NICE LINE ID TO THE MESSAGE
; ADD PROGRAM REQUEST DATA TO THE DOWN LINE LOAD MESSAGE
MOVX T4,.DTDTE ;GET DTE20 DEVICE TYPE CODE
IDPB T4,T1 ;ADD DEVICE TYPE TO MESSAGE
MOVX T4,.CP11 ;GET PDP-11 CPU TYPE CODE
IDPB T4,T1 ;ADD CPU TYPE CODE TO MESSAGE
MOVX T4,.PTSLD ;GET SECONDARY LOADER PROGRAM TYPE CODE
IDPB T4,T1 ;ADD PROGRAM TYPE CODE TO THE MESSAGE
ADDI T2,3 ;ACCOUNT FOR THE ADDED BYTES IN MESSAGE
;MAKIMB - ROUTINE TO ASSEMBLE A BINARY NUMBER INTO AN IMAGE FIELD IN
; A MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD IN MESSAGE
; T2/ NUMBER OF BYTES IN IMAGE FIELD TO BE ASSEMBLED
; T3-T4/ BINARY NUMBER TO BE ADDED TO MESSAGE
; CALL MAKIMB
;RETURNS: +1 ALWAYS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; NOTE: CALLER MUST KEEP TRACK OF TOTAL MESSAGE SIZE
MAKIMB::IDPB T2,T1 ;ADD BYTE COUNT TO THE IMAGE FIELD
; LOOP OVER EACH BYTE TO BE ADDED TO THE MESSAGE
MKB010: SOJL T2,R ;IF NO MORE BYTES TO ADD, RETURN
IDPB T4,T1 ;ADD NEXT BYTE TO THE MESSAGE
LSHC T3,-8 ;RIGHT JUSTIFY REMAINING BYTES
JRST MKB010 ;LOOP OVER ALL BYTES IN THE FIELD
;MAKIMA - ROUTINE TO ASSEMBLE AN ASCII STRING INTO AN IMAGE FIELD
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD IN MESSAGE
; T2/ MAXIMUM NUMBER OF BYTES TO BE ASSEMBLED
; T3/ POINTER TO ASCIZ STRING TO BE ASSEMBLED
; CALL MAKIMA
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ NUMBER OF BYTES ACTUALLY ASSEMBLED
MAKIMA::ASUBR <MKAPTR,MKACNT,MKASTR>
IBP T1 ;SKIP OVER COUNT BYTE UNTIL STRING MOVED
MOVEI T4,0 ;INITIALIZE BYTE COUNTER
JUMPE T2,MKA020 ;IF NOTHING TO BE ASSEMBLED, JUST ADD BYTE COUNT
; LOOP OVER EACH BYTE IN THE ASCIZ STRING
MKA010: ILDB T3,MKASTR ;GET NEXT CHARACTER FROM ASCIZ STRING
JUMPE T3,MKA020 ;IF END OF STRING, GO FIX UP COUNT BYTE
SOJL T2,MKA020 ;IF MAX CHARS IN MESSAGE, GO WRAP UP
IDPB T3,T1 ;ADD THE BYTE TO THE MESSAGE
ADDI T4,1 ;INCREMENT COUNT OF CHARACTERS DEPOSITED
JRST MKA010 ;LOOP OVER ALL CHARACTERS IN THE STRING
; HERE WHEN ALL CHARACTERS ARE IN THE MESSAGE - FIX UP THE COUNT BYTE
MKA020: IDPB T4,MKAPTR ;ADD COUNT TO THE IMAGE FIELD
MOVEI T2,1(T4) ;COPY # OF CHARACTERS ASSEMBLED + COUNT BYTE
RETSKP ;DONE, RETURN
;MAKNOD - ROUTINE TO ADD A NODE NAME TO A MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD IN MESSAGE BEING ASSEMBLED
; T2/ NUMBER OF BYTES CURRENTLY IN MESSAGE
; T3/ POINTER TO ASCIZ NODE NAME
; CALL MAKNOD
;RETURNS: +1 ALWAYS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED COUNT OF BYTES IN MESSAGE
MAKNOD::STKVAR <MNDCNT>
MOVEM T2,MNDCNT ;SAVE CURRENT BYTE COUNT
MOVX T2,NNAMSZ ;GET MAX SIZE OF NODE NAMES
CALL MAKIMA ;ASSEMBLE NAME AS IMAGE ASCII FIELD
RETBAD () ;FAILED, RETURN ERROR TO CALLER
ADD T2,MNDCNT ;GET UPDATED BYTE COUNT
RETSKP ;DONE, RETURN
;MAKMPW - ROUTINE TO ADD A MAINTENANCE PASSWORD TO A MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD IN MESSAGE
; T2/ NUMBER OF BYTES CURRENTLY IN MESSAGE
; T3/ MAINTENANCE PASSWORD
; CALL MAKMPW
;RETURNS: +1 ALWAYS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED COUNT OF BYTES IN MESSAGE
MAKMPW: ASUBR <MMPPTR,MMPCNT,MMPPSW>
MOVE T1,MMPPTR ;GET POINTER TO NEXT FIELD
MOVE T2,MMPPSW ;GET PASSWORD
CALL MAK4 ;ADD A FOUR-BYTE FIELD TO THE MESSAGE
MOVE T2,MMPCNT ;GET PREVIOUS BYTE COUNT
ADDI T2,4 ;INCREMENT FOR PASSWORD SIZE
RET ;RETURN
;MAKZRO - ROUTINE TO MAKE A "ZERO LINE COUNTERS" NICE MESSAGE
;
;ACCEPTS IN T1-T2/ STANDARD NICE LINE ID
; T1/ LINE DEVICE TYPE (.DTXXX),,LINE CONTROLLER #
; T2/ LINE UNIT NUMBER,,LINE STATION ADDRESS
; CALL MAKZRO
;RETURNS: +1 ALWAYS, WITH T1/ POINTER TO START OF MESSAGE
; T2/ COUNT OF BYTES IN THE MESSAGE
MAKZRO: ASUBR <MKZLIN>
CALL CLRMSG ;INITIALIZE MESSAGE AREA
MOVE T1,[POINT 8,MSGBLK] ;GET POINTER TO START OF MESSAGE AREA
MOVX T4,.NCZRO ;GET "ZERO COUNTERS" NICE FUNCTION CODE
IDPB T4,T1 ;ADD FUNCTION CODE TO MESSAGE
MOVX T4,.NCZLN ;GET OPTION FOR "LINE COUNTERS"
IDPB T4,T1 ;ADD OPTION BYTE
DMOVE T3,MKZLIN ;GET LINE ID
MOVX T2,2 ;GET NUMBER OF BYTES IN MESSAGE SO FAR
CALL MAKLIN ;ADD LINE ID TO MESSAGE
HRLI T1,(POINT 8,) ;GET POINTER TO START OF ASSEMBLED
HRRI T1,MSGBLK ; "ZERO COUNTERS" MESSAGE
RET ;DONE, RETURN.
;MAKEXA - ROUTINE TO ADD AN EXTENSIBLE STRING TO A MESSAGE
;
;ACCEPTS IN T1/ POINTER TO DESTINATION FOR EXTENSIBLE STRING
; T2/ POINTER TO SOURCE STRING
; T3/ CURRENT NUMBER OF BYTES IN MESSAGE
; CALL MAKEXA
;RETURNS: +1 ALWAYS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T3/ UPDATED COUNT OF BYTES IN MESSAGE
MAKEXA: ASUBR <MKEDST,MKESRC>
ILDB T1,MKESRC ;GET A SOURCE BYTE
JUMPE T1,[IDPB T1,MKEDST ;IF NULL STRING, DEPOSIT THE NULL AND
RET] ; RETURN
MKEXA2: ILDB T2,MKESRC ;GET NEXT CHARACTER FROM STRING
CAIE T2,.CHNUL ;GO A NULL BYTE ?
TXO T1,EXTBIT ;NO, NOTE THAT ANOTHER BYTE FOLLOWS
IDPB T1,MKEDST ;STORE FIRST BYTE INTO DESTINATION
ADDI T3,1 ;INCREMENT # OF BYTES IN MESSAGE
TXNN T1,EXTBIT ;HAS THE LAST BYTE BEEN ADDED TO STRING ?
JRST MKEXA3 ;YES, GO RETURN THE UPDATED POINTER AND COUNT
MOVE T1,T2 ;NO, MAKE "NEXT CHARACTER" BE "THIS CHARACTER"
JRST MKEXA2 ;GO TEST NEXT CHARACTER OF STRING
; HERE WHEN ALL CHARACTERS HAVE BEEN PLACED INTO EXTENSIBLE STRING
MKEXA3: MOVE T1,MKEDST ;RETURN UPDATED POINTER TO MESSAGE
;COUNT IS STILL IN T3
RET ;RETURN WITH UPDATED BYTE POINTERS AND COUNT
;MAKMEM - ROUTINE TO ADD A MEMORY ADDRESS OR SIZE TO A MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD IN MESSAGE
; T2/ NUMBER OF BYTES CURRENTLY IN MESSAGE
; T3/ MEMORY ADDRESS OR SIZE
; CALL MAKMEM
;RETURNS: +1 ALWAYS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED BYTE COUNT
MAKMEM: ASUBR <MKMPTR,MKMCNT,MKMMEM>
MOVE T1,MKMPTR ;GET POINTER TO NEXT FIELD
MOVE T2,MKMMEM ;GET MEMORY ADDRESS OR SIZE
CALL MAK4 ;ADD A FOUR-BYTE FIELD TO MESSAGE
MOVE T2,MKMCNT ;GET PREVIOUS BYTE COUNT
ADDI T2,4 ;ALLOW FOR MEMORY ADDRESS
RET ;RETURN
;MAKLOC - ROUTINE TO ADD A "NUMBER OF LOCATIONS" FIELD TO A MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD IN MESSAGE
; T2/ NUMBER OF BYTES CURRENTLY IN MESSAGE
; T3/ NUMBER OF LOCATIONS
; CALL MAKLOC
;RETURNS: +1 ALWAYS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED BYTE COUNT
MAKLOC: ASUBR <MKLPTR,MKLCNT,MKLLOC>
MOVE T1,MKLPTR ;GET POINTER TO NEXT FIELD IN MESSAGE
MOVE T2,MKLLOC ;GET NUMBER OF LOCATIONS
CALL MAKTWO ;ADD A TWO BYTE FIELD TO THE MESSAGE
MOVE T2,MKLCNT ;GET PREVIOUS BYTE COUNT
ADDI T2,2 ;ADD SIZE OF LOCATION FIELD
RET ;RETURN
;MAKNAM - ROUTINE TO ADD A NODE NAME PARAMETER TO A MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD IN MESSAGE
; T2/ CURRENT MESSAGE SIZE (IN BYTES)
; T3/ POINTER TO ASCIZ NODE NAME
; CALL MAKNAM
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED BYTE COUNT
MAKNAM::ASUBR <MNMPTR,MNMCNT,MNMNAM>
MOVX T4,.PVNAM ;GET NODE NAME PARAMETER TYPE CODE
IDPB T4,T1 ;ADD PARAMETER TYPE TO MESSAGE
ADDI T2,1 ;INCREMENT BYTE COUNT FOR PARAMETER TYPE BYTE
CALL MAKNOD ;GO ADD A NODE NAME TO THE MESSAGE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
RETSKP ;DONE, RETURN SUCCESS
;MAKHST - ROUTINE TO ADD A HOST NODE NAME PARAMETER TO A MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD IN MESSAGE
; T2/ CURRENT MESSAGE SIZE (IN BYTES)
; T3/ POINTER TO ASCIZ HOST NODE NAME
; CALL MAKHST
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED BYTE COUNT
MAKHST::ASUBR <MHNPTR,MHNCNT,MHNNAM>
MOVX T4,.PVHST ;GET HOST NODE NAME PARAMETER TYPE CODE
IDPB T4,T1 ;ADD PARAMETER TYPE TO MESSAGE
ADDI T2,1 ;INCREMENT BYTE COUNT FOR PARAMETER TYPE BYTE
CALL MAKNOD ;GO ADD A NODE NAME TO THE MESSAGE
RETBAD () ;FAILED, RETURN ERROR TO CALLER
RETSKP ;DONE, RETURN SUCCESS
;MAKSLN - ROUTINE TO ASSEMBLE A NICE "SET PARAMETERS" MESSAGE TO
; SET THE STATE OF A LINE
;
;ACCEPTS IN T1/ LINE STATE
; T2-T3/ STANDARD NICE LINE ID
; T4/ DESTINATION ADDRESS FOR MESSAGE
; CALL MAKSLN
;RETURNS: +1 FAILED
; +2 SUCCESS, WITH T1/ POINTER TO START OF MESSAGE
; T2/ COUNT OF BYTES IN THE MESSAGE
MAKSLN::STKVAR <MLNSTA,<MLNLIN,2>,MLNPTR>
MOVEM T1,MLNSTA ;SAVE LINE STATE
DMOVEM T2,MLNLIN ;SAVE LINE ID
MOVE T1,T4 ;COPY ADDRESS OF START OF MESSAGE
HRLI T1,(POINT 8,) ;FORM POINTER TO START OF MESSAGE
MOVEM T1,MLNPTR ;SAVE POINTER TO START OF MESSAGE
MOVX T4,.NCSET ;GET NICE PROTOCOL "SET PARAMETER" FUNCTION
IDPB T4,T1 ;ADD FUNCTION CODE TO MESSAGE
MOVX T4,.NCSLN ;GET NICE "SET LINE STATE" OPTION CODE
IDPB T4,T1 ;ADD OPTION BYTE TO MESSAGE
MOVX T2,2 ;CURRENTLY TWO BYTES IN THE MESSAGE
DMOVE T3,MLNLIN ;GET LINE ID
CALL MAKLIN ;ADD LINE TO THE MESSAGE
MOVE T4,MLNSTA ;GET LINE STATE
IDPB T4,T1 ;ADD STATE TO MESSAGE
ADDI T2,1 ;INCREMENT COUNT OF BYTES IN THE MESSAGE
MOVE T1,MLNPTR ;RESTORE POINTER TO START OF MESSAGE
RETSKP ;DONE, RETURN SUCCESS
;MAKEVT - ROUTINE TO ASSEMBLE THE HEADER PART OF AN EVENT LOG MESSAGE
;
;ACCEPTS IN T1/ POINTER TO DESTINATION FOR MESSAGE
; T2/ EVENT CODE (.EVXXX)
; CALL MAKEVT
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ NUMBER OF BYTES IN THE MESSAGE
MAKEVT: STKVAR <MKEEVT,MKECNT>
MOVEM T2,MKEEVT ;SAVE EVENT CODE
MOVX T4,.NCLOG ;GET NICE "LOG DATA" FUNCTION CODE
IDPB T4,T1 ;ADD TO NICE MESSAGE
MOVX T4,.LGMNT ;GET MAINTENANCE LOG OPTION
IDPB T4,T1 ;ADD TO NICE MESSAGE
MOVX T2,NNAMSZ ;GET MAX SIZE OF NODE NAMES
MOVE T3,[POINT 7,OURNAM] ;GET POINTER TO NAME OF THIS NODE
CALL MAKIMA ;ADD ASCII STRING TO MESSAGE
RETBAD () ;FAILED
MOVEM T2,MKECNT ;SAVE COUNT OF CHARS ACTUALLY ASSEMBLED
MOVE T3,[POINT 7,[ASCIZ/NETCON/]] ;GET PROGRAM NAME
MOVX T2,6 ;GET SIZE OF OUR PROGRAM NAME
CALL MAKIMA ;ADD PROGRAM NAME TO THIS MESSAGE
RETBAD () ;FAILED
AOS T4,EVTSEQ ;GET NEXT EVENT LOG SEQUENCE NUMBER TO USE
IDPB T4,T1 ;ADD SEQUENCE NUMBER TO MESSAGE
MOVE T2,MKEEVT ;GET EVENT TYPE CODE
CALL MAKTWO ;ADD EVENT CODE TO NICE MESSAGE
MOVE T2,MKECNT ;GET NUMBER OF BYTES USED IN NODE NAME
ADDI T2,^D12 ;ACCOUNT OF NON-VARYING INFORMATION
RETSKP ;RETURN SUCCESS
;MAKENA - ROUTINE TO ASSEMBLE A NICE SET PARAMETER MESSAGE TO ENABLE
; EVENT LOGGING AT A NODE
;
;CALL: CALL MAKENA
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ ADDRESS OF MESSAGE
; T2/ NUMBER OF BYTES IN THE MESSAGE
MAKENA::MOVE T1,[POINT 8,[BYTE (8) .NCSET, .NCNLS, .NSON ]]
MOVX T2,3 ;3 BYTES IN MESSAGE
RETSKP ;DONE
;MAKDIS - ROUTINE TO ASSEMBLE A NICE SET PARAMETER MESSAGE TO DISABLE
; EVENT LOGGING AT A NODE
;
;CALL: CALL MAKDIS
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ ADDRESS OF MESSAGE
; T2/ NUMBER OF BYTES IN THE MESSAGE
MAKDIS::MOVE T1,[POINT 8,[BYTE (8) .NCSET, .NCNLS, .NSOFF ]]
MOVX T2,3 ;3 BYTES IN MESSAGE
RETSKP ;DONE
;MAKENL - ROUTINE TO ASSEMBLE A NICE SET PARAMETER MESSAGE TO ENABLE
; EVENT LOGGING FOR A LINE OR LINES.
;
;ACCEPTS IN T1-T2/ STANDARD NICE LINE ID (-1 IN FIRST WORD FOR ALL LINES)
; T3/ DESTINATION ADDRESS FOR MESSAGE
; CALL MAKENL
;RETURNS: +1 FAILED
; +2 SUCCESS, WITH T1/ ADDRESS OF MESSAGE
; T2/ NUMBER OF BYTES IN THE MESSAGE
MAKENL::STKVAR <<MNLLID,2>,MNLDST>
DMOVEM T1,MNLLID ;SAVE LINE ID
HRRZ T1,T3 ;GET DESTINATION ADDRESS FOR MESSAGE
HRLI T1,(POINT 8,) ;FORM POINTER TO MESSAGE DESTINATION
MOVEM T1,MNLDST ;SAVE POINTER TO MESSAGE
MOVX T3,.NCSET ;GET NICE "SET PARAMETER" FUNCTION CODE
IDPB T3,T1 ;STORE IN MESSAGE
MOVX T3,.NCLLS ;GET "LINE LOGGING STATE" OPTION
IDPB T3,T1 ;STORE OPTION IN MESSAGE
MOVX T2,2 ;TWO BYTES IN MESSAGE SO FAR
DMOVE T3,MNLLID ;GET LINE ID
CAMN T3,[-1] ;ALL LINES SPECIFIED ?
JRST [ MOVX T3,.LTALL ;YES, GET "ALL LINES" CODE
IDPB T3,T1 ;STORE IN MESSAGE
ADDI T2,1 ;INCREMENT COUNT FOR LINE ID
JRST MAKNL1 ] ;AND CONTINUE
CALL MAKLIN ;ADD LINE ID TO MESSAGE
MAKNL1: MOVX T3,.NSON ;GET STATE CODE FOR "ON"
IDPB T3,T1 ;ADD STATE TO MESSAGE
ADDI T2,1 ;ACCOUNT FOR STATE CODE IN BYTE COUNT
MOVE T1,MNLDST ;RESTORE POINTER TO START OF MESSAGE
RETSKP ;DONE, RETURN
;MAKDSL - ROUTINE TO ASSEMBLE A NICE SET PARAMETER MESSAGE TO DISABLE
; EVENT LOGGING FOR A LINE OR LINES.
;
;ACCEPTS IN T1-T2/ STANDARD NICE LINE ID (-1 IN FIRST WORD FOR ALL LINES)
; T3/ DESTINATION ADDRESS FOR MESSAGE
; CALL MAKDSL
;RETURNS: +1 FAILED
; +2 SUCCESS, WITH T1/ ADDRESS OF MESSAGE
; T2/ NUMBER OF BYTES IN THE MESSAGE
MAKDSL::STKVAR <<MDLLID,2>,MDLDST>
DMOVEM T1,MDLLID ;SAVE LINE ID
HRRZ T1,T3 ;GET DESTINATION ADDRESS FOR MESSAGE
HRLI T1,(POINT 8,) ;FORM DESTINATION ADDRESS FOR MESSAGE
MOVEM T1,MDLDST ;SAVE ADDRESS OF START OF MESSAGE
MOVX T3,.NCSET ;GET NICE "SET PARAMETER" FUNCTION CODE
IDPB T3,T1 ;STORE IN MESSAGE
MOVX T3,.NCLLS ;GET "LINE LOGGING STATE" OPTION
IDPB T3,T1 ;STORE OPTION IN MESSAGE
MOVX T2,2 ;TWO BYTES IN MESSAGE SO FAR
DMOVE T3,MDLLID ;GET LINE ID
CAMN T3,[-1] ;ALL LINES SPECIFIED ?
JRST [ MOVX T3,.LTALL ;YES, GET "ALL LINES" CODE
IDPB T3,T1 ;STORE IN MESSAGE
ADDI T2,1 ;INCREMENT COUNT FOR LINE ID
JRST MAKNL1 ] ;AND CONTINUE
CALL MAKLIN ;ADD LINE ID TO MESSAGE
MKLIN1: MOVX T3,.NSOFF ;GET STATE CODE FOR "ON"
IDPB T3,T1 ;ADD STATE TO MESSAGE
ADDI T2,1 ;ACCOUNT FOR STATE CODE IN BYTE COUNT
MOVE T1,MDLDST ;GET POINTER TO START OF MESSAGE
RETSKP ;DONE, RETURN
;MAKNUM - ROUTINE TO ADD A NODE NUMBER PARAMETER TO A MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD IN MESSAGE
; T2/ NUMBER OF BYTES IN THE MESSAGE
; T3/ NODE NUMBER
; CALL MAKNUM
;RETURNS: +1 ALWAYS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
; T2/ UPDATED MESSAGE SIZE
MAKNUM::ASUBR <MNUPTR,MNUCNT,MNUNUM>
MOVX T4,.PVNUM ;GET NODE NUMBER PARAMETER VALUE TYPE CODE
IDPB T4,T1 ;ADD PARAMETER TYPE CODE TO MESSAGE
MOVX T4,2 ;GET NUMBER OF BYTES IN THE NUMBER FIELD
IDPB T4,T1 ;ADD FIELD SIZE TO MESSAGE
MOVE T2,MNUNUM ;GET NODE NUMBER TO ADD TO MESSAGE
CALL MAKTWO ;GO ADD A TWO BYTE FIELD TO THE MESSAGE
MOVE T2,MNUCNT ;GET ORIGINAL COUNT
ADDI T2,3 ;ACCOUNT FOR TYPE CODE AND 2-BYTE NUMBER
RET ;DONE, RETURN
;MAKTWO - ROUTINE TO ADD A TWO-BYTE NUMBER TO A MESSAGE
;
;ACCEPTS IN T1/ BYTE POINTER TO DESTINATION IN MESSAGE
; T2/ NUMBER TO BE ADDED TO MESSAGE
; CALL MAKTWO
;RETURNS: +1 ALWAYS, WITH T1/ UPDATED BYTE POINTER TO NEXT FIELD IN MESSAGE
MAKTWO:: IDPB T2,T1 ;PUT LOW ORDER BYTE INTO MESSAGE FIRST
LSH T2,-8 ;RIGHT-ADJUST HIGH ORDER BYTE OF NUMBER
IDPB T2,T1 ;DEPOSIT HIGH ORDER BYTE INTO MESSAGE NEXT
RET ;RETURN, WITH UPDATED POINTER IN T1
;MAK4 - ROUTINE TO ADD A FOUR-BYTE NUMBER TO A MESSAGE
;
;ACCEPTS IN T1/ POINTER TO NEXT FIELD IN MESSAGE
; T2/ NUMBER TO BE ADDED TO THE MESSAGE
; CALL MAK4
;RETURNS +1 ALWAYS, WITH T1/ UPDATED POINTER TO NEXT FIELD IN MESSAGE
MAK4: ASUBR <PT4PTR,PT4NUM>
; ADD THE FIRST TWO BYTES TO THE MESSAGE
MOVE T1,PT4PTR ;GET POINTER TO NEXT FIELD
MOVE T2,PT4NUM ;GET NUMBER TO BE ADDED
CALL MAKTWO ;ADD NEXT TWO BYTES TO MESSAGE
; ADD THE NEXT TWO BYTES TO THE MESSAGE
MOVE T2,PT4NUM ;GET THE NUMBER TO BE ADDED AGAIN
LSH T2,-^D16 ;SHIFT TO POSITION THE NEXT TWO BYTES TO ADD
CALLRET MAKTWO ;ADD NEXT TWO BYTES TO THE MESSAGE AND RETURN
SUBTTL Routines to Manipulate DTE-20's
;DTESTP - Routine to Terminate any Protocol Running on the Specified DTE20.
;
;ACCEPTS IN T1/ LINE TABLE ADDRESS
; CALL DTESTP
;RETURNS: +1 FAILED, DEVICE IS NOT IN KNOWN STATE
; +2 SUCCESS, READY TO LOAD SECONDARY BOOTSTRAP
DTESTP: ASUBR <SDTLIN>
CALL CLRBOT ;INITIALIZE THE BOOT JSYS ARGUMENT BLOCK
MOVEI T2,BTARG ;GET ADDRESS OF BOOT JSYS ARGUMENT BLOCK
MOVE T4,SDTLIN ;GET LINE TABLE ADDRESS
LOAD T4,LNDTE,(T4) ;GET DTE20 NUMBER
MOVEM T4,.BTDTE(T2) ;STORE DTE-20 NUMBER TO STOP
MOVEI T1,.BTTPR ;FUNCTION IS "TERMINATE PROTOCOL"
BOOT ;STOP THE SPECIFIED DTE-20
ERJMP R ;THIS IS NOT EXPECTED TO FAIL
RETSKP ;SUCCESS, BOOTSTRAP CAN NOW BE LOADED
;DTESLD - ROUTINE TO SEND DATA ACROSS THE DTE20
;
;ACCEPTS IN T1/ ADDRESS OF LINE TABLE
; CALL DTESLD
;RETURNS: +1 FAILED, TRANSFER ERROR
; +2 SUCCESS, DATA SENT
DTESLD: ASUBR <LDTLIN>
CALL CLRBOT ;CLEAR THE BOOT JSYS ARGUMENT BLOCK
; SEND SECONDARY BOOTSTRAP ACROSS THE DTE20
MOVEI T2,BTARG ;GET ADDRESS OF BOOT ARGUMENT BLOCK
MOVE T4,LDTLIN ;GET ADDRESS OF LINE TABLE ENTRY
LOAD T1,LNMSG,(T4) ;GET ADDRESS OF DATA TO BE SENT
HRRZM T1,.BTSEC(T2) ;SAVE ADDRESS OF SECONDARY DATA
LOAD T1,LNDTE,(T4) ;GET DTE20 NUMBER
MOVEM T1,.BTDTE(T2) ;SAVE DTE20 NUMBER IN ARGUMENT BLOCK
MOVEI T1,.BTLDS ;GET BOOT JSYS FUNCTION CODE
BOOT ;LOAD THE SECONDARY BOOTSTRAP
ERJMP R ;FAILED, RETURN ERROR
RETSKP ;RETURN
;DTESND - ROUTINE TO SEND A MOP MESSAGE ACROSS THE DTE20
;
;ACCEPTS IN T1/ ADDRESS OF LINE TABLE
; CALL DTESND
;RETURNS: +1 FAILED
; +2 SUCCESS, MESSAGE SENT ACROSS THE DTE20
DTESND: ASUBR <SDTLIN>
CALL CLRBOT ;GO CLEAR THE BOOT JSYS ARGUMENT BLOCK
MOVEI T2,BTARG ;GET ADDRESS OF BOOT JSYS ARGUMENT BLOCK
MOVE T4,SDTLIN ;GET ADDRESS OF LINE TABLE
LOAD T1,LNDTE,(T4) ;GET DTE20 NUMBER
MOVEM T1,.BTDTE(T2) ;STORE PHYSICAL LINE NUMBER (DTE20 NUMBER)
LOAD T1,LNMSG,(T4) ;GET POINTER TO MOP MESSAGE TO SEND
MOVEM T1,.BTLPT(T2) ;PUT POINTER INTO BOOT JSYS ARGUMENT BLOCK
MOVX T1,BT%BEL ;GET "DOORBELL WANTED" FLAG
MOVEM T1,.BTFLG(T2) ;SAVE FLAGS IN ARGUMENT BLOCK
LOAD T1,LNCNT,(T4) ;GET NUMBER OF BYTES IN THE MOP MESSAGE
MOVEM T1,.BTCNT(T2) ;STORE BYTE COUNT IN BOOT JSYS ARGUMENT BLOCK
MOVEI T1,.BTLOD ;GET "LOAD" FUNCTION CODE
BOOT ;SEND THE DATA ACROSS THE DTE20
ERJMP R ;FAILED, RETURN ERROR
RETSKP ;RETURN, DATA SENT
;DTEWAT - ROUTINE TO WAIT FOR A DOORBELL FROM A DTE20
;
;ACCEPTS IN T1/ ADDRESS OF LINE TABLE
; CALL DTEWAT
;RETURNS: +1 FAILED
; +2 SUCCESS
DTEWAT: ASUBR <DTWLIN>
CALL CLRBOT ;CLEAR BOOT JSYS ARGUMENT BLOCK
MOVE T4,DTWLIN ;GET ADDRESS OF LINE TABLE
LOAD T1,LNDTE,(T4) ;GET DTE20 NUMBER
MOVX T2,BTARG ;GET ADDRESS OF BOOT JSYS ARG BLOCK
MOVEM T1,.BTDTE(T2) ;SAVE DTE20 NUMBER
MOVX T1,.BTBEL ;GET "WAIT FOR DOORBELL" FUNCTION CODE
BOOT ;WAIT FOR THE DOORBELL
ERJMP R ;FAILED, RETURN ERROR
RETSKP ;DONE, RETURN SUCCESS
;DTEDMP - ROUTINE TO GET DUMP DATA OVER THE DTE20
;
;ACCEPTS IN T1/ LINE TABLE ADDRESS
; CALL DTEDMP
;RETURNS: +1 FAILED, BOOT JSYS ERROR
; +2 SUCCESS, DATA BYTES DUMPED INTO DATA AREA FOR THIS LINE
DTEDMP: ASUBR <DTDLIN>
CALL CLRBOT ;GO CLEAR THE BOOT JSYS ARGUMENT BLOCK
MOVEI T2,BTARG ;GET ADDRESS OF BOOT JSYS ARGUMENT BLOCK
MOVE T3,DTDLIN ;GET ADDRESS OF LINE TABLE ENTRY
LOAD T4,LNDTE,(T3) ;GET DTE20 NUMBER FOR THIS LINE
MOVEM T4,.BTDTE(T2) ;STORE DTE20 NUMBER IN BOOT JSYS ARG BLOCK
LOAD T1,LNDCT,(T3) ;GET TOTAL NUMBER OF BYTES LEFT TO BE DUMPED
CAIL T1,MAXMEM ;LESS THAN MAX FOR ONE IMAGE DATA MESSAGE ?
MOVX T1,MAXMEM ;NO, USE ENOUGH TO FILL ONE DATA MESSAGE
TRNE T1,1 ;ODD NUMBER OF BYTES ?
SUBI T1,1 ;YES, DUMP INTEGRAL NUMBER OF WORDS
STOR T1,LNCNT,(T3) ;STORE # OF BYTES TO RETURN
LSH T1,-1 ;COMPUTE NUMBER OF WORDS TO DUMP
MOVEM T1,.BTCNT(T2) ;STORE NUMBER OF BYTES TO TRANSFER
LOAD T4,LNMSG,(T3) ;GET ADDRESS OF DATA AREA FOR THIS LINE
HRLI T4,(POINT 8,) ;FORM BYTE POINTER TO DESTINATION
STOR T4,LNPTR,(T3) ;STORE NEW POINTER TO DATA TO RETURN
HRLI T4,(POINT 16,) ;FORM POINTER FOR BOOT JSYS
MOVEM T4,.BTDPT(T2) ;STORE POINTER TO DESTINATION IN ARG BLOCK
MOVEI T1,.BTDMP ;GET BOOT JSYS FUNCTION CODE (DUMP)
BOOT ;DUMP THE DATA
ERJMP R ;FAILED, RETURN ERROR
RETSKP ;SUCCESS, DONE.
;DTERCV - ROUTINE TO RECEIVE A MOP MESSAGE ACROSS THE DTE20
;
;ACCEPTS IN T1/ ADDRESS OF LINE TABLE
; CALL DTERCV
;RETURNS: +1 FAILED
; +2 SUCCESS, WITH T1/ POINTER TO START OF MOP MESSAGE
; T2/ NUMBER OF BYTES IN MOP MESSAGE
DTERCV: ASUBR <RDTLIN>
CALL CLRBOT ;GO CLEAR THE BOOT JSYS ARGUMENT BLOCK
MOVEI T2,BTARG ;GET ADDRESS OF BOOT JSYS ARGUMENT BLOCK
MOVE T4,RDTLIN ;GET ADDRESS OF LINE TABLE
LOAD T1,LNDTE,(T4) ;GET DTE20 NUMBER
MOVEM T1,.BTDTE(T2) ;STORE NUMBER OF DTE20 TO USE
; SYNCHRONIZE WITH THE BOOTSTRAP PROGRAM BY WAITING FOR A TO-20 DOORBELL
MOVEI T1,.BTBEL ;GET "WAIT FOR DOORBELL" FUNCTION
MOVEI T2,BTARG ;GET ADDRESS OF BOOT JSYS ARGUMENT BLOCK
BOOT ;WAIT TILL BOOTSTRAP STARTS UP
ERJMP R ;FAILED, RETURN ERROR
; THE PROGRAM JUST LOADED IS NOW READY TO SEND BACK A MOP MESSAGE
MOVE T1,RDTLIN ;GET ADDRESS OF LINE TABLE
CALL CLRMOP ;GO CLEAR THE MOP MESSAGE AREA
MOVEI T2,BTARG ;GET ADDRESS OF BOOT JSYS ARGUMENT BLOCK
MOVEI T1,RCVMAX ;GET MAX NUMBER OF BYTES WE CAN RECEIVE
MOVEM T1,.BTCNT(T2) ;STORE BYTE COUNT
MOVE T4,RDTLIN ;GET ADDRESS OF LINE TABLE
LOAD T1,LNMSG,(T4) ;GET POINTER TO MESSAGE AREA
MOVEM T1,.BTDPT(T2) ;STORE POINTER TO WHERE MESSAGE GOES
SETZM .BTFLG(T2) ;CLEAR FLAGS
MOVEI T1,.BTRMP ;GET "READ MOP MESSAGE" FUNCTION CODE
BOOT ;GET A MOP MESSAGE
ERJMP R ;FAILED, RETURN ERROR
MOVE T4,RDTLIN ;GET ADDRESS OF LINE TABLE
LOAD T1,LNMSG,(T4) ;GET POINTER TO MESSAGE AREA
MOVE T2,.BTCNT+BTARG ;GET NUMBER OF BYTES RECEIVED
RETSKP ;DONE, RETURN
;DTEINI - ROUTINE TO ACTIVATE THE ROM ASSOCIATED WITH A DTE20
;
;ACCEPTS IN T1/ LINE TABLE ADDRESS
; CALL DTEINI
;RETURNS: +1 FAILED, COULD NOT ACTIVATE THE ROM
; +2 SUCCESS, ROM ACTIVATED
DTEINI: ASUBR <DTILIN>
CALL CLRBOT ;CLEAR THE BOOT JSYS ARGUMENT BLOCK
MOVEI T2,BTARG ;GET ADDRESS OF BOOT JSYS ARG BLOCK
MOVE T4,DTILIN ;GET ADDRESS OF LINE TABLE
LOAD T4,LNDTE,(T4) ;GET DTE20 NUMBER
MOVEM T4,.BTDTE(T2) ;STORE DTE20 NUMBER IN JSYS ARG BLOCK
MOVX T1,.BTROM ;GET "INITIALIZE ROM" FUNCTION CODE
BOOT ;INITIALIZE THE ROM FOR THIS DTE20
ERJMP R ;RETURN ERROR IF FAILED
RETSKP ; ELSE DONE, RETURN SUCCESS.
;DTEGO - ROUTINE TO INITIATE A PROTOCOL STARTUP ON A GIVEN DTE20
;
;ACCEPTS IN T1/ ADDRESS OF LINE TABLE
; T2/ PROTOCOL VERSION TYPE (.VNXXX) TO USE
; CALL DTEGO
;RETURNS: +1 FAILED, DTE20 ERROR
; +2 SUCCESS, PROTOCOL INITIATED
DTEGO: ASUBR <DTGLIN,DTGPRO>
CALL CLRBOT ;GO CLEAR THE BOOT JSYS ARGUMENT BLOCK
MOVEI T2,BTARG ;GET ADDRESS OF BOOT JSYS ARG BLOCK
MOVE T4,DTGLIN ;GET ADDRESS OF LINE TABLE
LOAD T1,LNDTE,(T4) ;GET DTE20 NUMBER FOR THIS LINE
MOVEM T1,.BTDTE(T2) ;STORE DTE20 NUMBER IN JSYS ARG BLOCK
MOVE T1,DTGPRO ;GET PROTOCOL VERSION TYPE
MOVEM T1,.BTPRV(T2) ;SAVE PROTOCOL TO USE IN BOOT JSYS ARG BLOCK
MOVEI T1,.BTIPR ;GET "INITIATE PROTOCOL" FUNCTION CODE
BOOT ;STARTUP THE PROTOCOL
ERJMP R ;FAILED, RETURN ERROR
RETSKP ;DONE, RETURN SUCCESS
SUBTTL I/O Subroutines
;INPBYT - ROUTINE TO INPUT THE NEXT BYTE FROM A PDP-11 FORMAT FILE
;
;ACCEPTS IN T1/ ADDRESS OF RECORD TABLE ENTRY
; CALL INPBYT
;RETURNS: +1 ERROR OR END OF FILE
; +2 SUCCESS, WITH BYTE IN T2
INPBYT: MOVE T4,T1 ;SAVE RECORD TABLE ENTRY ADDRESS
LOAD T3,RBBYT,(T4) ;GET NUMBER OF NEXT BYTE IN WORD
CAIGE T3,BPWRD ;ALREADY GOT LAST BYTE IN WORD ?
JRST GTBT10 ;NO, GO GET NEXT BYTE IN WORD
; ALL BYTES IN CURRENT WORD HAVE BEEN READ. INPUT THE NEXT DATA WORD
SETZRO RBBYT,(T4) ;WRAP AROUND TO FIRST BYTE IN WORD
LOAD T1,RBJFN,(T4) ;GET JFN OF CURRENT INPUT FILE
BIN ;INPUT THE NEXT WORD
ERJMP R ;FAILED, RETURN ERROR
STOR T2,RBDAT,(T4) ;STORE NEXT DATA WORD FROM INPUT FILE
; HERE TO ACTUALLY GET THE NEXT BYTE OF DATA
GTBT10: LOAD T1,RBDAT,(T4) ;GET CURRENT DATA WORD
LOAD T3,RBBYT,(T4) ;GET NUMBER OF NEXT BYTE TO LOAD
LDB T2,BYTTAB(T3) ;LOAD NEXT BYTE FROM CURRENT WORD
INCR RBBYT,(T4) ;POINT TO NEXT BYTE IN WORD
RETSKP ;RETURN WITH BYTE IN T2
; INPWRD -- INPUT A 16-BIT WORD AS TWO 8-BIT BYTES
;
; ACCEPTS IN T1/ ADDRESS OF RECORD BLOCK FOR THIS OPERATION
;
; RETURNS:
; +1: I/O ERROR OR END-OF-FILE
; +2: SUCCESS,
; T1/ SUM OF BYTES
; T2/ 16-BIT WORD, RIGHT-JUSTIFIED
;
INPWRD:
PUSH P,T1 ;SAVE RECORD BLOCK ADDRESS
CALL INPBYT ;READ FIRST (LOW) BYTE
RET ;ERROR-- RETURN +1 FROM INPWRD
POP P,T1 ;RESTORE RECORD BLOCK ADDRESS
PUSH P,T2 ;SAVE LOW BYTE
CALL INPBYT ;READ SECOND (HIGH) BYTE
RET ;ERROR-- RETURN +1 FROM INPWRD
POP P,T3 ;RESTORE LOW BYTE
MOVE T1,T3 ;COPY IT FOR SUM
ADD T1,T2 ;COMPUTE SUM OF BYTES TO T1
LSH T2,^D8 ;SHIFT HIGH BYTE TO BITS 15-8
IOR T2,T3 ;MUSH TOGETHER WITH LOW BYTE INTO WORD IN T2
RETSKP ;RETURN +2 FROM INPWRD, SUM IN T1, WORD IN T2
;WRTDMP - ROUTINE TO OUTPUT A DUMP RECORD TO THE DUMP FILE
;
;ACCEPTS IN T1/ POINTER TO DATA TO BE OUTPUT
; T2/ NUMBER OF BYTES TO OUTPUT
; T3/ ADDRESS OF RECORD TABLE ENTRY
; CALL WRTDMP
;RETURNS: +1 FAILED, FILE DATA OR OTHER ERROR
; +2 SUCCESS, DATA OUTPUT TO FILE
WRTDMP: ASUBR <WTDPTR,WTDCNT,WTDREC>
WDMP10: SOSG WTDCNT ;DECREMENT # OF BYTES LEFT TO WRITE
RETSKP ;DONE, ALL BYTES OUTPUT
MOVE T1,WTDREC ;GET RECORD TABLE ENTRY ADDRESS
ILDB T2,WTDPTR ;GET NEXT BYTE TO OUTPUT
CALL WRTBYT ;GO OUTPUT THE BYTE
RET ;FAILED, RETURN ERROR
JRST WDMP10 ;LOOP OVER ALL BYTES TO OUTPUT
; TABLE OF BYTE POINTERS TO GET THE "NEXT" BYTE IN PDP-11 FORMAT
BYTTAB: POINT 8,T1,17
POINT 8,T1,9
POINT 8,T1,35
POINT 8,T1,27
;WRTBYT - ROUTINE TO WRITE A BYTE INTO A PDP-11 FORMAT FILE
;
;ACCEPTS IN T1/ ADDRESS OF RECORD TABLE ENTRY
; T2/ BYTE TO BE OUTPUT
; CALL WRTBYT
;RETURNS: +1 FAILED, OUTPUT ERROR
; +2 SUCCESS, BYTE HAS BEEN OUTPUT
WRTBYT: ASUBR <WTDREC,WTDBYT>
; DETERMINE IF AN ENTIRE WORD HAS BEEN FILLED - IF SO, OUTPUT THE WORD
MOVE T4,WTDREC ;GET ADDRESS OF RECORD TABLE ENTRY
LOAD T3,RBBYT,(T4) ;GET NUMBER OF NEXT BYTE TO DEPOSIT
CAIGE T3,BPWRD ;THIS WORD ENTIRELY FILLED YET ?
JRST WTDT10 ;NO, GO DEPOSIT THE BYTE
; THE CURRENT WORD HAS NO MORE ROOM AND MUST BE WRITTEN INTO THE FILE
LOAD T1,RBJFN,(T4) ;GET JFN OF OUTPUT FILE
LOAD T2,RBDAT,(T4) ;GET WORD TO BE WRITTEN
BOUT ;OUTPUT THE WORD
ERJMP R ;FAILED, RETURN ERROR
SETZRO RBBYT,(T4) ;RESET THE BYTE COUNTER
; HERE TO DEPOSIT THE BYTE INTO THE CURRENT DATA WORD
WTDT10: MOVE T4,WTDREC ;GET ADDRESS OF RECORD TABLE ENTRY
LOAD T3,RBBYT,(T4) ;GET NUMBER OF NEXT BYTE TO DEPOSIT
LOAD T1,RBDAT,(T4) ;GET THE CURRENT DATA WORD
MOVE T2,WTDBYT ;GET THE DATA BYTE TO DEPOSIT
DPB T2,BYTTAB(T3) ;STORE THE BYTE INTO PROPER PLACE IN THE WORD
STOR T1,RBDAT,(T4) ;REPLACE CURRENT DATA WORD
INCR RBBYT,(T4) ;INCREMENT NUMBER OF NEXT BYTE TO DEPOSIT
RETSKP ;RETURN SUCCESS, DONE.
;OPNIFL - ROUTINE TO OPEN A FILE FOR INPUT
;
;ACCEPTS IN T1/ POINTER TO ASCIZ FILESPEC
; CALL OPNIFL
;RETURNS: +1 FAILED, GTJFN OR OPENF FAILURE
; +2 SUCCESS, WITH T1/ JFN OF INPUT FILE
; T2/ FILE FORMAT TYPE (.FTXXX)
OPNIFL: STKVAR <<OPITYP,8>,OPIJFN>
MOVE T2,T1 ;COPY POINTER TO FILESPEC
MOVX T1,GJ%OLD!GJ%SHT ;EXISTING FILE, SHORT CALL
GTJFN ;GET A JFN FOR INPUT FILE
RET ;FAILED, RETURN
MOVE T2,[440000,,OF%RD] ;36-BIT BYTES, READ ACCESS ONLY
OPENF ;OPEN THE FILE
JRST [ RLJFN ;FAILED, RELEASE THE JFN
JFCL ;IGNORE ERRORS HERE
RET ] ;RETURN ERROR
; FIND THE FILE FORMAT TYPE FROM THE FILE TYPE
MOVEM T1,OPIJFN ;SAVE JFN
HRRZ T2,T1 ;COPY THE JFN FOR JFNS
HRROI T1,OPITYP ;POINT STRING POINTER TO SCRATCH
MOVX T3,<FLD(.JSAOF,JS%TYP)> ;GET ONLY FILE TYPE
JFNS
ERJMP R ;FAILED, RETURN ERROR
MOVEI T1,FTYTAB ;POINT TO FILE TYPE TABLE
HRROI T2,OPITYP ;POINT TO SCRATCH STRING
TBLUK ;FIND FILE TYPE
ERJMP R ;FAILED, RETURN ERROR
MOVE T3,T2 ;COPY FLAGS
HRRZ T2,(T1) ;GET TABLE ENTRY, FILE TYPE FORMAT
TXNN T3,TL%EXM ;EXACT MATCH?
RET ;FAIL IF UNKNOWN FILE TYPE
MOVE T1,OPIJFN ;RESTORE JFN
RETSKP ;SUCCESS, RETURN WITH T1/ JFN, T2/ FILE FORMAT TYPE
; FILE FORMAT TYPE TABLE FOR OPNIFL (TBLUK FORMAT)
FTYTAB:
XWD FTYTBZ,FTYTBZ
TB (.FTLDA,BIN)
TB (.FTDMP,DMP)
TB (.FTLDA,LDA)
TB (.FTTSK,SYS)
TB (.FTTSK,TSK)
FTYTBZ==.-FTYTAB-1
;OPNOFL - ROUTINE TO OPEN A FILE FOR OUTPUT
;
;ACCEPTS IN T1/ POINTER TO ASCIZ FILESPEC
; CALL OPNOFL
;RETURNS: +1 FAILED, GTJFN OR OPENF FAILURE
; +2 SUCCESS, WITH T1/ JFN OF OUTPUT FILE
OPNOFL: MOVE T2,T1 ;COPY POINTER TO FILESPEC
MOVX T1,GJ%FOU!GJ%SHT ;FILE FOR OUTPUT USE, SHORT CALL
GTJFN ;GET A JFN FOR OUTPUT FILE
RET ;FAILED, RETURN
MOVE T2,[440000,,OF%WR] ;36-BIT BYTES, WRITE ACCESS ONLY
OPENF ;OPEN THE FILE
JRST [ RLJFN ;FAILED, RELEASE THE JFN
JFCL ;IGNORE ERRORS HERE
RET ] ;RETURN ERROR
RETSKP ;SUCCESS, RETURN WITH T1/ JFN
;CLSOFL - ROUTINE TO CLOSE AN OUTPUT FILE. ANY DATA REMAINING IN THE
; RECORD TABLE ENTRY MUST BE WRITTEN INTO THE FILE BEFORE THE
; FILE IS ACUTALLY CLOSED.
;
;ACCEPTS IN T1/ ADDRESS OF RECORD BLOCK
; CALL CLSOFL
;RETURNS: +1 FAILED, COULD NOT CLOSE FILE
; +2 SUCCESS, ALL DATA OUTPUT AND FILE CLOSED
CLSOFL: MOVE T4,T1 ;COPY ADDRESS OF RECORD TABLE ENTRY
LOAD T1,RBJFN,(T4) ;GET JFN OF OUTPUT FILE
LOAD T2,RBDAT,(T4) ;GET CURRENT DATA WORD
JE RBBYT,(T4),CLOF10 ;IF NO BYTES IN THIS WORD, SKIP OUTPUT
BOUT ;OUTPUT THE REMAINING BYTES
ERJMP CLOF10 ;TRY TO CLOSE FILE ANYWAY ON ERROR
CLOF10: CLOSF ;CLOSE THE FILE
ERJMP R ;RETURN FAILURE IF COULD NOT CLOSE FILE
RETSKP ;DONE, RETURN SUCCESS
;INPLDA - ROUTINE TO INPUT ONE BLOCK FROM A PDP-11 FORMAT .LDA FILE
;
;ACCEPTS IN T1/ ADDRESS OF RECORD BLOCK
; CALL INPLDA
;RETURNS: +1 FAILED, BAD FILE FORMAT, PREMATURE EOF, OR BAD CHECKSUM
; +2 SUCCESS, WITH DATA INPUT INTO RECORD BLOCK
INPLDA: ASUBR <IBKREC,IBKSUM,IBKCTR,IBKCNT>
STKVAR <IBKPTR>
SETZM IBKSUM ;INITIALIZE THE CHECKSUM
; SKIP OVER INITIAL ZERO BYTES
IBLK10: MOVE T1,IBKREC ;GET ADDRESS OF RECORD TABLE ENTRY
CALL INPBYT ;GO GET A BYTE FROM THE INPUT FILE
RET ;FAILED, RETURN
JUMPE T2,IBLK10 ;SKIP OVER ZERO BYTES
; THE NEXT TWO BYTES SHOULD BE A 1-BYTE FOLLOWED BY A 0-BYTE
ADDM T2,IBKSUM ;ADD BYTE JUST INPUT TO CHECKSUM
CAIE T2,1 ;NEXT BYTE A 1-BYTE ?
RET ;NO, BAD FILE FORMAT
MOVE T1,IBKREC ;YES, GET ADDRESS OF RECORD TABLE ENTRY
CALL INPBYT ;GO GET THE NEXT BYTE FROM THE INPUT FILE
RET ;FAILED, RETURN
ADDM T2,IBKSUM ;ADD BYTE JUST INPUT TO CHECKSUM
CAIE T2,0 ;JUST READ A 0-BYTE ?
RET ;NO, BAD FILE FORMAT
; INPUT THE BYTE COUNT (2 BYTES)
MOVE T1,IBKREC ;GET ADDRESS OF RECORD TABLE ENTRY
CALL INPWRD ;GET NEXT WORD FROM FILE
RET ;FAILED, RETURN
ADDM T1,IBKSUM ;UPDATE THE CHECKSUM
MOVEM T2,IBKCNT ;SAVE BYTE COUNT
; ..
; ..
; READ THE LOAD OR TRANSFER ADDRESS (2 BYTES)
MOVE T1,IBKREC ;GET ADDRESS OF RECORD TABLE ENTRY
CALL INPWRD ;GO GET A WORD FROM THE INPUT FILE
RET ;FAILED, RETURN ERROR
ADDM T1,IBKSUM ;ADD THIS WORD TO THE CHECKSUM
MOVE T4,IBKREC ;GET ADDRESS OF RECORD TABLE ENTRY
STOR T2,RBNAD,(T4) ;STORE LOAD ADR IN RECORD TABLE ENTRY
STOR T2,RBXAD,(T4) ;STORE TRANSFER ADR IN RECORD TABLE ENTRY
; SET UP TO READ THE DATA BYTES FROM THE BLOCK
MOVE T1,IBKCNT ;GET BYTE COUNT
SUBI T1,BINHDR ;ALLOW FOR BYTES IN HEADER
MOVEM T1,IBKCTR ;SAVE NUMBER OF DATA BYTES TO READ
MOVE T4,IBKREC ;GET ADDRESS OF RECORD TABLE ENTRY
STOR T1,RBCNT,(T4) ;SAVE NUMBER OF DATA BYTES IN RECORD TABLE ENTRY
LOAD T1,RBPTR,(T4) ;GET POINTER TO DESTINATION FOR DATA
MOVEM T1,IBKPTR ;SAVE POINTER TO DESTINATION OF NEXT DATA BYTE
; READ THE DATA BYTES FROM THE BLOCK
IBLK20: SOSGE IBKCTR ;ANOTHER BYTE TO READ ?
JRST IBLK30 ;NO, GO READ AND VERIFY BLOCK CHECKSUM
MOVE T1,IBKREC ;GET ADDRESS OF RECORD TABLE ENTRY
CALL INPBYT ;GET A BYTE FROM THE FILE
RET ;FAILED, RETURN ERROR
ADDM T2,IBKSUM ;UPDATE THE CHECKSUM
IDPB T2,IBKPTR ;STORE THE BYTE IN THE RECORD BLOCK
JRST IBLK20 ;GO GET THE NEXT BYTE FROM THE FILE
; HERE TO READ AND VERIFY THE CHECKSUM AFTER READING THE DATA BYTES
IBLK30: MOVE T1,IBKREC ;GET ADDRESS OF RECORD TABLE ENTRY
CALL INPBYT ;GO GET A BYTE FROM THE FILE
RET ;FAILED, RETURN ERROR
MOVN T1,IBKSUM ;GET -CHECKSUM
LDB T1,[POINT 8,T1,35] ;GET JUST THE LOW ORDER BYTE OF CHECKSUM
CAME T1,T2 ;CHECKSUM VERIFY CORRECLTY ?
RET ;NO, RETURN FAILURE
; HERE WHEN DONE - RETURN TO CALLER
RETSKP ;RETURN SUCCESS
; INPTSK/INPDMP - INPUT A BLOCK FROM A TASK-IMAGE OR DUMP FORMAT FILE
;
; ACCEPTS IN:
; T1/ RECORD BLOCK ADDRESS
;
; RETURNS:
; +1: FAILED, I/O ERROR, INVALID FORMAT OR PREMATURE EOF
; +2: SUCCESS, DATA LOADED INTO RECORD BLOCK
;
INPDMP:
INPTSK:
TRVAR <ITSREC,ITSCNT,ITSPTR>
MOVEM T1,ITSREC ;SAVE ADDRESS OF RECORD BLOCK
;
; SEE IF WE HAVE READ LABEL BLOCKS ALREADY
; SET NEW ADDRESS FOR THIS BLOCK
;
LOAD T2,RBCAD,(T1) ;GET CURRENT ADDRESS
STOR T2,RBNAD,(T1) ;SET CURRENT ADDRESS AS NEXT ADDRESS
CAME T2,[EXP -1] ;HAS ADDRESS
CAIL T2,777777 ; BEEN SET YET?
SKIPA ;NO-- READ LABEL BLOCKS
JRST ITSCBC ;YES-- JUST MOVE DATA FROM FILE
;
; SET UP BYTE COUNTS, READING LABEL BLOCKS IF NEEDED
CALL INPCNT ;GO SET UP COUNTS
RET ;FAILED
;
; COMPUTE BYTE COUNT FOR THIS RECORD
;
ITSCBC: LOAD T2,RBFCT,(T1) ;GET REMAINING BYTE COUNT IN FILE
MOVE T3,T2 ;COPY BYTE COUNT
CAILE T2,MAXMEM ;MORE THAN MAX ALLOWED IN MEMORY MESSAGES?
MOVX T2,MAXMEM ;YES-- USE MAXIMUM
SUB T3,T2 ;COMPUTE REMAINING BYTE COUNT
STOR T3,RBFCT,(T1) ;STORE UPDATED COUNT
MOVEM T2,ITSCNT ;REMEMBER THE COUNT
STOR T2,RBCNT,(T1) ; ALSO FOR EVERYBODY ELSE
;
; READ BYTES INTO RECORD
;
LOAD T2,RBPTR,(T1) ;GET POINTER TO DATA REGION
MOVEM T2,ITSPTR ;SAVE THAT
;
; LOOP THROUGH THE BYTES . . .
;
ITSBLP: SOSGE ITSCNT ;COUNT DOWN, WE DONE?
RETSKP ;YES-- RETURN +2 FROM INPTSK
MOVE T1,ITSREC ;GET RECORD BLOCK ADDRESS
CALL INPBYT ;GET NEXT FILE BYTE
RET ;ERROR OR EOF-- RETURN NOW
IDPB T2,ITSPTR ;STORE BYTE
JRST ITSBLP ;LOOP FOR ALL BYTES
; INPCNT - SET UP COUNTS AND READ LABEL BLOCKS IF NEEDED
;
; ACCEPTS IN:
; ITSREC/ ADDRESS OF RECORD BLOCK
;
; RETURNS:
; +1 ERROR
; +2 SUCCESS, WITH RBFCT, RBSAD, RBNAD SET UP
;
INPCNT: MOVE T1,ITSREC ;GET ADDRESS OF RECORD BLOCK
LOAD T2,RBTYP,(T1) ;GET FILE TYPE (.FTXXX)
CAIL T2,0 ;RANGE CHECK THE FILE
CAIL T2,FTYPLN ; TYPE CODE
RET ;FAIL, INVALID FILE TYPE
CALLRET @FLTYPE(T2) ;DISPATCH TO ROUTINE TO SET UP COUNTS
FLTYPE: RET ; 0 IS ILLEGAL
RET ; .FTLDA - SHOULD NOT BE HERE FOR LDA FILES
INPTCT ; .FTTSK - TASK-IMAGE FILE TYPE
INPDCT ; .FTDMP - DUMP FORMAT FILE TYPE
FTYPLN==.-FLTYPE ;SIZE OF TYPE DISPATCH TABLE
; INPTCT - INPUT COUNTS FOR A TASK-IMAGE FILE TYPE
;
; ACCEPTS:
; ITSREC/ ADDRESS OF RECORD BLOCK
;
; RETURNS:
; +1 FAILED
; +2 SUCCESS, WITH COUNTS SET UP IN RECORD BLOCK
INPTCT:
;
; READ LABEL BLOCKS
;
; SETS UP RBFCT, RBXAD, AND RBNAD
;
MOVEI T2,L$BSA-0 ;SKIP TO L$BSA
CALL ITSSKP ; . .
RET ;ERROR OR END-OF-FILE
;
CALL INPWRD ;GET BASE ADDRESS: L$BSA
RET ;ERROR/EOF
MOVE T1,ITSREC ;POINT TO RECORD BLOCK
STOR T2,RBNAD,(T1) ;STORE BASE ADDRESS
;
MOVEI T2,L$BLDZ-<L$BSA+2> ;SKIP TO L$BLDZ
CALL ITSSKP ; . .
RET ;ERROR/EOF
;
CALL INPWRD ;GET LOAD SIZE / 64.: L$BLSZ
RET ;ERROR/EOF
LSH T2,^D6 ;CONVERT LOAD SIZE TO BYTES
MOVE T1,ITSREC ;POINT TO RECORD BLOCK
STOR T2,RBFCT,(T1) ;STORE LOAD SIZE AS BYTES LEFT IN FILE
;
MOVEI T2,L$BFLG-<L$BLDZ+2> ;SKIP TO L$BFLG
CALL ITSSKP ; . .
RET ;ERROR/EOF
;
CALL INPWRD ;GET FLAGS WORD: L$BFLG
RET ;ERROR/EOF
TXNN T2,TS$NHD ;TASK FILE HAVE NO HEADER: TS$NHD= 1?
RET ;NO-- NOT SYSTEM IMAGE
;
MOVEI T2,L$BXFR-<L$BFLG+2> ;SKIP TO L$BXFR
CALL ITSSKP ; . .
RET ;ERROR/EOF
;
CALL INPWRD ;GET TRANSFER ADDRESS: L$BXFR
RET ;ERROR/EOF
MOVE T1,ITSREC ;POINT TO RECORD BLOCK
STOR T2,RBXAD,(T1) ;STORE TRANSFER ADDRESS
;
MOVEI T2,L$BHRB-<L$BXFR+2> ;SKIP TO L$BHRB
CALL ITSSKP ; . .
RET ;ERROR/EOF
;
CALL INPWRD ;GET RELATIVE BLOCK OF IMAGE: L$BHRB
RET ;ERROR/EOF
LSH T2,^D9 ;CONVERT TO BYTES (512. BYTES/BLOCK)
SUBI T2,L$BHRB+2 ;MINUS BYTES ALREADY READ
CALL ITSSKP ;SKIP REMAINING LABEL BLOCKS
RET ;ERROR/EOF
RETSKP ;DONE, RETURN SUCCESS
; INPDCT - ROUTINE TO SET UP THE COUNT FOR A DUMP FORMAT FILE
;
; ACCEPTS:
; ITSREC/ ADDRESS OF RECORD BLOCK
;
; RETURNS:
; +1 FAILED
; +2 SUCCESS, WITH COUNTS SET UP
INPDCT: MOVE T1,ITSREC ;GET ADDRESS OF RECORD BLOCK
SETZRO <RBNAD,RBXAD>,(T1) ;INITIALIZE COUNTS
LOAD T1,RBJFN,(T1) ;GET JFN OF INPUT FILE
MOVX T2,<2,,.FBBYV> ;TWO WORDS, BYTE SIZE WORD & FILE SIZE
MOVX T3,T2 ;PUT RESULTS INTO T2 AND T3
GTFDB ;GET FILE DATA
ERJMP R ;FAILED
LOAD T2,FB%BSZ,T2 ;GET FILE BYTE SIZE
MOVX T1,^D36 ;GET # OF BITS PER WORD
IDIV T1,T2 ;COMPUTE NUMBER OF BYTES PER WORD IN FILE
ADDI T3,-1(T1) ;FILE SIZE + BYTES/WORD -1
IDIV T3,T1 ;ROUND FILES SIZE
IMULI T3,BPWRD ;COMPUTE NUMBER OF KL20 WORDS
MOVE T1,ITSREC ;GET ADDRESS OF RECORD BLOCK
STOR T3,RBFCT,(T1) ;STORE COUNT
RETSKP ;DONE, RETURN
; ITSSKP -- SKIP SOME BYTES IN T2
;
; ACCEPTS IN:
; T2/ COUNT OF BYTES TO SKIP
;
; RETURNS:
; +1: ERROR/EOF
; +2: SUCCESS, T1 POINTS TO RECORD BLOCK
;
ITSSKP:
MOVEM T2,ITSCNT ;SAVE COUNT
ITSSLP:
MOVE T1,ITSREC ;POINT TO RECORD BLOCK
SOSGE ITSCNT ;BYTES LEFT?
RETSKP ;NO-- RETURN +2 FROM ITSSKP
CALL INPBYT ;GET A BYTE
RET ;ERROR/EOF
JRST ITSSLP ;SKIP MORE....
;GETLNK - ROUTINE TO GET A LOGICAL LINK TO A NICE PROCESS
;
;ACCEPTS IN T1/ POINTER TO ASCIZ NODE NAME OF DESTINATION
; CALL GETLNK
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ LOGICAL LINK NUMBER (I.E., JFN)
GETLNK: STKVAR <GLLNOD,<GLLNAM,20>,<GLLBLK,20>>
MOVEM T1,GLLNOD ;SAVE POINTER TO NAME OF DESTINATION NODE
MOVSI T1,GLLBLK ;SET UP TO CLEAR
HRRI T1,1+GLLBLK ; THE GTJFN BLOCK
SETZM GLLBLK ;CLEAR FIRST WORD OF BLOCK
BLT T1,17+GLLBLK ;CLEAR REMAINDER OF BLOCK
HRROI T1,[ASCIZ/DCN/] ;GET POINTER TO ASCIZ DEVICE NAME OF DESTINATION
MOVEM T1,.GJDEV+GLLBLK ;SAVE POINTER TO DEVICE
HRROI T1,GLLNAM ;GET POINTER TO TEMPORARY STRING AREA
MOVE T2,GLLNOD ;GET POINTER TO NAME OF DESTINATION NODE
SETZM T3 ;TERMINATE ON NULL
SOUT ;COPY THE NAME OF THE DESTINATION NODE
ERJMP [RETBAD (.NRCME)] ;FAILED, RETURN "COMMUNCATIONS ERROR"
MOVEI T2,"-" ;GET DELIMITER BETWEEN NODE AND SERVER NAME
IDPB T2,T1 ;ADD DELIMITER TO FILE NAME
HRROI T2,[ASCIZ/NCU/] ;GET POINTER TO NAME OF NICE PROCESS SERVER
SOUT ;ADD SERVER NAME TO FILESPEC
ERJMP [RETBAD (.NRCME)] ;FAILED, RETURN "COMMUNICATIONS ERROR"
HRROI T1,GLLNAM ;GET POINTER TO FILE NAME
MOVEM T1,.GJNAM+GLLBLK ;SAVE POINTER TO NAME OF FILE
SETZM .GJEXT+GLLBLK ;NO EXTENSION NEEDED
SETZM .GJGEN+GLLBLK ;NO FLAGS
MOVE T1,[.NULIO,,.NULIO] ;NO JFN'S NEEDED
MOVEM T1,.GJSRC+GLLBLK ;SAVE NULL JFN'S AS SOURCE, ECHOING JFN'S
SETZM T2 ;NO STRING POINTER
MOVEI T1,GLLBLK ;GET ADDRESS OF GTJFN BLOCK
GTJFN ;GET A JFN FOR THE NICE PROCESS
ERJMP [RETBAD (.NRCME)] ;FAILED, RETURN "COMMUNICATIONS ERROR"
MOVEM T1,T4 ;SAVE JFN IN CASE OPENF FAILS
MOVE T2,[100000,,OF%RD+OF%WR] ;8 BIT BYTES, READ AND WRITE ACCESS
OPENF ;OPEN THE LOGICAL LINK
ERJMP [MOVE T1,T4 ;FAILED, RESTORE JFN
RLJFN ;RELEASE JFN
JFCL ;IGNORE FAILURE, NOT CRITICAL
RETBAD (.NRCME)] ;FAILED, RETURN "COMMUNICATIONS ERROR"
RETSKP ;DONE, JFN (LOGICAL LINK NUMBER) IS IN T1
SUBTTL SYSERR Routines
;LOGGER - ROUTINE TO PERFORM LOGGING OF LINE COUNTER DATA
;
LOGGER::MOVE P,[-PDLEN,,LOGPDL-1] ;SET UP STACK POINTER
MOVEI P5,LOGFFP_9 ;GET ADDRESS OF SCRATCH AREA FOR LOGGING PROCESS
; PERIODICALLY LOG LINE COUNTERS
LOGR20: CALL TSTLOG ;DO ANY LINE COUNTER LOGGING NEEDED
MOVE T1,LOGTIM ;GET TIME INTERVAL BETWEEN LOGGINGS
DISMS ;WAIT
JRST LOGR20 ;GO CHECK TO SEE IF LOGGING IS STILL ENABLED
;TSTLOG - ROUTINE TO LOOP OVER ALL NODES LOOKING FOR LINES WHOSE
; COUNTERS ARE TO BE LOGGED
TSTLOG:
; LOOP OVER ALL NIBS, CHECKING FOR LINES FOR WHICH COUNTERS SHOULD BE LOGGED
TSTL05: MOVEI P1,NIBTAB ;GET BASE ADDRESS OF NIB TABLES
SKIPGE P2,NXTNIB ;GET NUMBER OF NIBS
RET ;NO NIBS DEFINED YET, DONE
TSTL10: MOVE T1,P1 ;GET NIB ADDRESS
CALL CHKLOG ;GO SEE IF ANY OF THESE LINES SHOULD BE LOGGED
ADDI P1,NIBSIZ ;POINT TO NEXT NIB
SOJGE P2,TSTL10 ;DO ALL NIBS
RET ;DONE, RETURN
;CHKLOG - ROUTINE TO CHECK IF ANY LINES SHOULD HAVE COUNTERS LOGGED
; FOR A GIVEN NODE.
;
;ACCEPTS IN T1/ NIB ADDRESS FOR THE NODE
; CALL CHKLOG
;RETURNS: +1 ALWAYS, COUNTERS LOGGED IF NEEDED
CHKLOG: ASUBR <CHLNIB,CHLNAM>
ACVAR <W3,W4>
LOAD T4,NDNAM,(T1) ;GET POINTER TO NAME OF THIS NODE
MOVEM T4,CHLNAM ;SAVE POINTER TO NAME
; LOCK THE NODE IN CASE IT IS BEING LOADED OR DUMPED
MOVE T1,CHLNIB ;GET NIB ADDRESS
MOVX T2,RM%PRI ;PRIMARY RESOURCE (LOAD OR DUMP)
CALL LOKNOD ;LOCK THE NODE
; LOOP OVER THE NODE'S LINES
MOVE T1,CHLNIB ;GET NIB ADDRESS
LOAD W4,NDLIN,(T1) ;GET ADDRESS OF LINE TABLE FOR OUR NODE
MOVSI W3,-MXLNOD ;SET UP TO LOOP OVER EACH ENTRY IN LINE TABLE
CHL010: MOVE T1,CHLNAM ;GET POINTER TO NAME
DMOVE T2,(W4) ;GET LINE ID
JE LTUSE,(W4),CHL020 ;SKIP THIS ENTRY IF NOT IN USE
JE LTLOG,(W4),CHL020 ;IF LOGGING NOT ENABLES FOR THIS LINE, GO ON
CALL LOGCTR ;LOG COUNTERS IF THIS LINE ENABLED
NON.FATAL.ERROR (.ERR21)
CHL020: ADDI W4,LATSIZ ;POINT TO NEXT TABLE ENTRY
AOBJN W3,CHL010 ;LOOP OVER ALL LINE TABLE ENTRIES
; UNLOCK THE NODE AND RETURN
MOVE T1,CHLNIB ;GET NIB ADDRESS
MOVX T2,RM%PRI ;PRIMARY RESOURCE
CALL ULKNOD ;UNLOCK THE NIB
RET ;DONE, RETURN
ENDAV.
ENDAS.
;LOGCTR - ROUTINE TO LOG LINE COUNTERS FOR A SPECIFIED LINE
;
;ACCEPTS IN T1/ POINTER TO ASCIZ NODE NAME
; T2-T3/ LINE ID OF LINE FOR WHICH COUNTERS ARE WANTED
; CALL LOGCTR
;RETURNS: +1 FAILED, COULD NOT LOG COUNTERS
; +2 SUCCESS, COUNTERS LOGGED IN SYSERR FILE
LOGCTR: ASUBR <LCTNOD,LCTBLK,LCTNUM>
STKVAR <LCTPTR,LCTCNT,LCTLEN,<LCTLIN,2>>
DMOVEM T2,LCTLIN ;SAVE LINE ID
; READ THE LINE COUNTERS FROM THE OBJECT NODE NCU
MOVE T1,LCTNOD ;GET POINTER TO ASCIZ NODE NAME
DMOVE T2,LCTLIN ;GET LINE ID
CALL REDCTR ;GO READ THE COUNTERS
RET ;FAILED
ILDB T4,T1 ;GET COUNTER TYPE CODE
CAIE T4,.RDLCT ;LINE COUNTERS RETURNED ?
RET ;NO, FAIL
SUBI T2,1 ;ACCOUNT FOR TYPE CODE
; EXTRACT THE LINE ID FROM THE NICE MESSAGE
CALL GETLIN ;GO GET THE LINE ID
RET ;FAILED, RETURN ERROR TO CALLER
CAMN T3,LCTLIN ;DID WE RECEIVE THE INFO FOR THE LINE
CAME T4,1+LCTLIN ; FOR WHICH IT WAS REQUESTED ?
RET ;NO, ERROR
MOVEM T1,LCTPTR ;YES, SAVE POINTER TO NEXT FIELD IN MESSAGE
MOVEM T2,LCTCNT ;SAVE NUMBER OF BYTES REMAINING IN MESSAGE
; GET A BLOCK TO USE FOR SYSERR ENTRIES
MOVEI T1,MAXSYE ;GET MAX SIZE OF SYSERR ENTRIES
CALL GETFRE ;ASSIGN A BLOCK
RET ;FAILED, RETURN ERROR
ADDI T1,1 ;POINT PAST THE HEADER
MOVEM T1,LCTBLK ;SAVE ADDRESS OF SYSERR BLOCK
; ASSEMBLE THE SYSERR ENTRY HEADER
MOVX T1,SY%LCT ;GET ENTRY TYPE CODE (LINE COUNTERS)
MOVX T2,^D11 ;SIZE OF LINE COUNTER ENTRIES
MOVE T3,LCTBLK ;ADDRESS OF SYSERR ENTRY
CALL SYRHDR ;ASSEMBLE A SYSERR ENTRY HEADER
;..
;..
; MARK FIELDS IN ENTRY THAT ARE NOT APPROPRIATE OR KNOWN
MOVE T1,LCTBLK ;GET ADDRESS OF SYSERR BLOCK
ADDI T1,.SYDAT ;POINT TO START OF COUNTER ENTRY DATA
MOVX T2,2 ;PERIODIC ENTRY
STOR T2,SYRSN,(T1) ;NO REASON
SETONE SYRCT,(T1) ;NO COUNT
SETONE SYNTM,(T1) ;NO NODE UPTIME
SETONE SYSEQ,(T1) ;SEQ NUMBER UNKOWN
SETONE SYFCN,(T1) ;SYSTEM TYPE UNKNOWN
SETONE SYADJ,(T1) ;ADJACENT NODE NOT KNOWN
SETONE SYMID,(T1) ;ID'S NOT KNOWN
; ADD THE COUNTERS TO THE SYSERR ENTRY
SETZM LCTNUM ;INITIALIZE NUMBER OF COUNTERS
MOVE P1,LCTBLK ;GET BASE ADDRESS OF SYSERR ENTRY
ADDI P1,.SYCTR ;COMPUTE STARTING ADDRESS OF COUNTER DATA
MOVE T1,LCTPTR ;RESTORE POINTER TO NICE MESSAGE
LCT010: MOVE T2,LCTCNT ;GET NUMBER OF BYTES LEFT IN MESSAGE
CALL GETEXB ;GO GET COUNTER TYPE FROM MESSAGE
JRST LCT020 ;NO MORE COUNTERS, DONE
STOR T4,SYTYP,(P1) ;STORE COUNTER TYPE IN SYSERR ENTRY
CALL GETTWO ;EXTRACT COUNTER VALUE FROM MESSAGE
JFCL
MOVEM T2,LCTCNT ;SAVE UPDATED COUNT
STOR T3,SYCTR,(P1) ;STORE COUNTER VALUE IN SYSERR ENTRY
AOS LCTNUM ;INCREMENT NUMBER OF COUNTERS IN THE ENTRY
AOJA P1,LCT010 ;LOOP OVER EACH COUNTER RETURNED
; ADD NUMBER OF COUNTERS TO THE SYSERR ENTRY
LCT020: MOVE T4,LCTBLK ;GET ADDRESS OF SYSERR ENTRY
ADDI T4,.SYDAT ;COMPUTE START OF DATA PORTION OF SYSERR ENTRY
MOVE T1,LCTNUM ;GET NUMBER OF COUNTERS
STOR T1,SYNCT,(T4) ;ADD NUMBER OF COUNTERS TO SYSERR ENTRY
; COMPUTE POINTER TO LOG DATA (IE TO THE COUNTERS)
MOVNS T1 ;GET -NUMBER OF COUNTERS
HRL T1,T1 ;GET -# OF COUNTERS,,0
HRRI T1,.SYCTR-.SYDAT ;FORM -# OF COUNTERS,,OFFSET TO COUNTER DATA
MOVE T2,LCTBLK ;GET BASE ADDRESS OF SYSERR ENTRY
ADDI T2,.SYDAT ;COMPUTE BASE ADDRESS FOR DATA PART OF ENTRY
STOR T1,SYPTR,(T2) ;STORE THE POINTER TO THE LOG DATA
;..
;..
; ADD THE TRANSMITTING NODE NAME TO THE SYSERR ENTRY
MOVE T1,LCTBLK ;GET BASE ADDRESS OF SYSERR ENTRY
MOVE P2,P1 ;COPY ADDRESS WHERE NAME WILL GO
SUBI P2,.SYDAT(T1) ;COMPUTE OFFSET TO NAME IN ENTRY
HRROI T1,(P1) ;FORM POINTER TO WHERE NAME GOES
MOVE T2,LCTNOD ;GET POINTER TO ASCIZ NODE NAME
SETZM T3 ;TERMINATE ON NULL
SOUT ;ADD NODE NAME TO SYSERR ENTRY
IBP T1 ;INCREMENT POINTER FOR MULTIPLES OF 5 BYTES
MOVE T2,T1 ;COPY CURRENT POINTER
SUBI T2,-1(P1) ;COMPUTE NUMBER OF WORDS USED
MOVN T2,T2 ;COMPUTE -WORD COUNT
HRL P2,T2 ;COMPUTE -WORD COUNT,,OFFSET
MOVE T2,LCTBLK ;GET ADDRESS OF SYSERR ENTRY
ADDI T2,.SYDAT ;COMPUTE START OF DATA AREA
STOR P2,SYNOD,(T2) ;STORE OFFSET TO ASCIZ NODE NAME
MOVEI P1,1(T1) ;POINT TO NEXT WORD IN SYSERR ENTRY
; ADD DESTINATION NODE (OUR NAME)
MOVE T1,LCTBLK ;GET BASE ADDRESS OF SYSERR ENTRY
MOVE P2,P1 ;COPY ADDRESS WHERE NAME WILL GO
SUBI P2,.SYDAT(T1) ;COMPUTE OFFSET TO NAME IN ENTRY
HRROI T1,(P1) ;FORM POINTER TO WHERE NAME GOES
HRROI T2,OURNAM ;WE ARE DESTINATION NODE
SETZM T3 ;TERMINATE ON NULL
SOUT ;ADD NODE NAME TO SYSERR ENTRY
MOVE T2,T1 ;COPY CURRENT POINTER
SUBI T2,-1(P1) ;COMPUTE NUMBER OF WORDS USED
MOVN T2,T2 ;COMPUTE -WORD COUNT
HRL P2,T2 ;COMPUTE -WORD COUNT,,OFFSET
MOVE T2,LCTBLK ;GET ADDRESS OF SYSERR ENTRY
ADDI T2,.SYDAT ;COMPUTE START OF DATA AREA
STOR P2,SYDST,(T2) ;STORE OFFSET TO ASCIZ NODE NAME
MOVEI P1,1(T1) ;POINT TO NEXT WORD IN SYSERR ENTRY
HRRZI T1,1(T1) ;GET JUST ADDRESS OF LAST WORD IN ENTRY
SUB T1,LCTBLK ;COMPUTE SIZE OF ENTIRE SYSERR ENTRY
MOVEM T1,LCTLEN ;SAVE SYSERR ENTRY LENGTH
SUBI T1,.SYDAT ;COMPUTE SIZE OF DATA PORTION OF ENTRY
MOVE T2,LCTBLK ;GET BASE ADDRESS OF SYSERR ENTRY
STOR T1,SYLEN,(T2) ;STORE SIZE OF DATA PART OF SYSERR ENTRY
; ..
; ..
; ADD THE LINE ID TO THE SYSERR ENTRY
MOVE T2,LCTBLK ;GET BASE ADDRESS OF SYSERR ENTRY
ADDI T2,.SYDAT ;POINT TO DATA PORTION OF ENTRY
HRL T3,LCTLIN ;GET CONTROLLER #
HLR T3,1+LCTLIN ;GET UNIT NUMBER
STOR T3,SYLID,(T2) ;SAVE LINE ID
HRRZ T4,1+LCTLIN ;GET STATION ADDRESS AND SAVE IN
STOR T4,SYLI1,(T2) ; IN SYSERR ENTRY
HLRZ T3,LCTLIN ;GET HARDWARE OPTION TYPE
MOVSI T4,-HDWSZ ;SET UP TO LOOK FOR DEVICE TYPE
LCT030: HRRZ T1,HDWTB(T4) ;GET OUR DEVICE TYPE CODE
CAMN T1,T3 ;FOUND RIGHT DEVICE TYPE ?
JRST [HLRZ T3,HDWTB(T4) ;YES, GET SYSERR TYPE CODE
JRST LCT040] ;GO STORE CODE
AOBJN T4,LCT030 ;LOOP OVER ALL CODES
SETOM T3 ;COULD NOT FIND CODE, USE UNKNOWN
LCT040: STOR T3,SYHDW,(T2) ;STORE HARDWARE DEVICE TYPE
; ADD THE ENTRY TO THE SYSERR FILE
MOVE T1,LCTBLK ;GET ADDRESS OF SYSERR ENTRY
MOVE T2,LCTLEN ;GET LENGTH OF ENTRY
SYERR ;MAKE A SYSERR ENTRY
ERJMP LCTERR ;FAILED, RELEASE SPACE AND RETURN
; RELEASE FREE SPACE
MOVE T1,LCTBLK ;GET ADDRESS OF SYSERR ENTRY
SUBI T1,1 ;RESTORE FREE BLOCK ADDRESS
CALL RELFRE ;RETURN THE BLOCK
FATAL.ERROR ; Die on release failure
; ZERO THE COUNTERS JUST REQUESTED AND RETURN TO CALLER
MOVE T1,LCTNOD ;GET POINTER TO NODE NAME
DMOVE T2,LCTLIN ;GET LINE ID
CALL ZROCTR ;GO ZERO THE COUNTERS
JFCL ;FAILED, IGNORE FAILURE SINCE LOGGING WORKED OK
RETSKP ;DONE, RETURN SUCCESS
; HERE ON AN ERROR TO RELEASE THE FREE SPACE AND RETURN
LCTERR: MOVE T1,LCTBLK ;GET ADDRESS OF SYSERR ENTRY
SUBI T1,1 ;RESTORE FREE BLOCK ADDRESS
CALL RELFRE ;RETURN THE BLOCK
FATAL.ERROR ; Die on release failure
RET ;RETURN ERROR TO CALLER
;ZROCTR - ROUTINE TO ZERO THE LINE COUNTERS FOR A LINE
;
;ACCEPTS IN T1/ POINTER TO ASCIZ NODE NAME
; T2-T3/ LINE ID
; CALL ZROCTR
;RETURNS: +1 FAILED
; +2 SUCCESS, COUNTERS CLEARED
ZROCTR: ASUBR <ZCTNOD,<ZCTLID,2>,ZCTLNK>
; GET A LOGICAL LINK TO THE NCU ON THE NODE
MOVE T1,ZCTNOD ;GET POINTER TO ASCIZ NODE NAME
CALL GETLNK ;GO GET A LOGICAL LINK TO THE NCU
RET ;FAILED
MOVEM T1,ZCTLNK ;SAVE LOGICAL LINK TO NCU
; ASSEMBLE A NICE PROTOCOL "ZERO COUNTERS" MESSAGE
DMOVE T1,ZCTLID ;GET LINE ID TO PUT INTO MESSAGE
CALL MAKZRO ;GO ASSEMBLE ZERO COUNTERS MESSAGE
; SEND THE MESSAGE TO THE NCU ON THE SPECIFIED NODE
MOVN T3,T2 ;GET -COUNT OF BYTES IN MESSAGE
MOVE T2,T1 ;GET POINTER TO START OF MESSAGE
MOVE T1,ZCTLNK ;GET LOGICAL LINK TO NCU
SOUTR ;OUTPUT THE NICE PROTOCOL MESSAGE
ERJMP ZCTERR ;FAILED, CLEAN UP AND RETURN FAILURE
; RECEIVE THE RESPONSE MESSAGE FROM THE NCU
CALL CLRMSG ;GO CLEAR NICE MESSAGE AREA
MOVE T1,ZCTLNK ;GET LOGICAL LINK TO NCU
MOVE T2,[POINT 8,MSGBLK] ;GET POINTER TO WHERE MESSAGE GOES
MOVNI T3,-MAXNIC ;GET MAX BYTE COUNT
SINR ;RECEIVE THE MESSAGE
ERJMP ZCTERR ;FAILED, CLEAN UP AND RETURN ERROR
MOVEI T2,MAXNIC(T3) ;GET NUMBER OF BYTES RECEIVED
CAIE T2,1 ;JUST RESPONSE CODE ?
JRST ZCTERR ;NO, CLEAN UP AND RETURN ERROR
LDB T1,[POINT 8,MSGBLK,7] ;GET NICE RETURN CODE VALUE
CAIE T1,.NRSUC ;SUCCESS CODE ?
JRST ZCTERR ;NO, FAIL
; COUNTERS SUCCESSFULLY ZERO'ED - CLEAN UP LOGICAL LINK AND RETURN SUCCESS
MOVE T1,ZCTLNK ;GET LOGICAL LINK
CLOSF ;CLOSE THE LINK
JFCL ;IGNORE FAILURE, FUNCTION WAS COMPLETED OK
RETSKP ;DONE, RETURN SUCCESS
; HERE ON ERROR - RELEASE LOGICAL LINK AND RETURN FAILURE
ZCTERR: MOVE T1,ZCTLNK ;GET LOGICAL LINK
CLOSF ;CLOSE THE LINK
JFCL ;IGNORE FAILURE, FUNCTION WAS COMPLETED OK
RET ;RETURN FAILURE TO CALLER
;REDCTR - ROUTINE TO GET THE LINE COUNTERS FROM AN OBJECT NODE
;
;ACCEPTS IN T1/ POINTER TO ASCIZ NODE NAME
; T2-T3/ LINE ID
; CALL REDCTR
;RETURNS: +1 FAILED
; +2 SUCCESS, WITH T1/ POINTER TO COUNTER DATA FROM NICE MESSAGE
; T2/ NUMBER OF BYTES REMAINING IN COUNTER DATA
REDCTR: ASUBR <RCTNOD,<RCTLIN,2>,RCTLNK>
STKVAR <RCTPTR,RCTCNT,RCTERR>
; SEND A NICE PROTOCOL "READ INFORMATION" MESSAGE TO GET LINE COUNTERS
MOVE T1,RCTNOD ;GET POINTER TO ASCIZ NODE NAME
CALL GETLNK ;GO GET A LOGICAL LINK TO NCU ON THAT NODE
RET ;FAILED
MOVEM T1,RCTLNK ;SAVE LOGICAL LINK (JFN) TO NCU
; REQUEST THE COUNTERS FROM THE NCU
SETZM RCTERR ;INITIALIZE ERROR CODE
MOVE T1,RCTLNK ;GET LOGICAL LINK
DMOVE T2,RCTLIN ;GET LINE ID
CALL REQCTR ;GO GET THE COUNTERS
MOVEM T1,RCTERR ;FAILED, SAVE ERROR CODE
MOVEM T2,RCTCNT ;SAVE NUMBER OF BYTES IN COUNTER DATA
; DISCONNECT THE LOGICAL LINK
MOVE T1,RCTLNK ;GET LOGICAL LINK
CLOSF ;DISCONNECT THE LINK
JFCL ;FAILED, IGNORE FAILURE.
; RETURN POINTER TO COUNTER DATA
SKIPE T1,RCTERR ;ANY ERRORS GETTING COUNTERS ?
RETBAD () ;YES, RETURN THE ERROR
MOVE T1,[POINT 8,MSGBLK] ;NO, GET POINTER TO START OF MESSAGE
MOVE T2,RCTCNT ;GET SIZE OF COUNTER DATA
RETSKP ;DONE, RETURN SUCCESS
;REQCTR - ROUTINE TO REQUEST THE LINE COUNTERS FROM A NODE
;
;ACCEPTS IN T1/ LOGICAL LINK TO NCU IN THE NODE
; T2-T3/ LINE ID FOR WHICH COUNTERS ARE DESIRED
; CALL REQCTR
;RETURNS: +1 FAILED, ERROR CODE IN T1
; +2 SUCCESS, WITH T2/ COUNT OF BYTES IN RESPONSE MESSAGE
REQCTR: ASUBR <RQCLNK,<RQCLIN,2>>
DMOVE T1,RQCLIN ;GET LINE ID
CALL MAKRLC ;GO ASSEMBLE A NICE "READ INFO" MESSAGE
RETBAD () ;FAILED
MOVN T3,T2 ;GET -COUNT
MOVE T2,T1 ;GET POINTER TO START OF READ INFO MESSAGE
MOVE T1,RQCLNK ;GET LOGICAL LINK (JFN) TO NCU
SOUTR ;SEND NICE "READ INFO" MSG TO GET LINE COUNTERS
ERJMP [RETBAD (.NRNCE)] ;RETURN IF SEND FAILED
; RECEIVE THE REPLY FROM THE NCU
CALL CLRMSG ;GO CLEAR THE NICE MESSAGE AREA
MOVE T1,RQCLNK ;GET LOGICAL LINK (JFN) TO NCU
HRLI T2,(POINT 8,) ;FORM POINTER TO START
HRRI T2,MSGBLK ; OF NICE MESSAGE AREA
MOVNI T3,MAXNIC ;GET -MAX COUNT
SINR ;RECEIVE REPLY FROM NCU
ERJMP [RETBAD (.NRNCE)] ;RETURN IF SEND FAILED
MOVEI T2,MAXNIC(T3) ;GET NUMBER OF BYTES RECEIVED
CAIE T2,3 ;RECEIVED 1-BYTE RETURN CODE & 2-BYTE COUNT ?
RETBAD (.NRIMF) ;NO, RETURN FAILURE
MOVE T1,[POINT 8,MSGBLK] ;GET POINTER TO START OF MESSAGE
ILDB T4,T1 ;GET NICE RETURN CODE
CAIE T4,.NRSUC ;GOT SUCCESS RETURN CODE ?
RETBAD (,<MOVE T1,T4>) ;NO, FAIL AND RETURN THE NICE ERROR CODE
MOVEI T2,2 ;HAVE TWO BYTES
CALL GETTWO ;YES, GO GET TWO-BYTE COUNT
JFCL
CAIE T3,1 ;ONE DATA BLOCK TO BE RECEIVED ?
RETBAD (.NRIMF) ;NO, RETURN FAILURE
; RECEIVE THE LINE COUNTERS FROM THE NCU
CALL CLRMSG ;GO CLEAR THE NICE MESSAGE AREA
MOVE T1,RQCLNK ;GET LOGICAL LINK (JFN) TO NCU
HRLI T2,(POINT 8,) ;FORM POINTER TO START
HRRI T2,MSGBLK ; OF NICE MESSAGE AREA
MOVNI T3,MAXNIC ;GET -MAX COUNT
SINR ;RECEIVE REPLY FROM NCU
ERJMP [RETBAD (.NRNCE)] ;RETURN IF SEND FAILED
MOVEI T2,MAXNIC(T3) ;GET NUMBER OF BYTES RECEIVED
RETSKP ;DONE, RETURN SUCCESS
;SYRHDR - ROUTINE TO MAKE A SYSERR ENTRY HEADER
;
;ACCEPTS IN T1/ SYSERR EVENT CODE (SY%XXX)
; T2/ LENGTH OF ENTRY
; T3/ ADDRESS OF SYSERR BLOCK
; CALL SYRHDR
;RETURNS: +1 ALWAYS, WITH HEADER SET UP AT LOCATION "SYRENT"
SYRHDR: STOR T1,SYCOD,(T3) ;STORE EVENT CODE (SY%XXX)
STOR T2,SYLEN,(T3) ;STORE LENGTH OF ENTRY
MOVX T1,4 ;GET LENGTH OF SYSERR ENTRY HEADER
STOR T1,SYHLN,(T3) ;STORE IN HEADER
MOVX T1,1 ;GET VERSION OF SYSERR HEADER
STOR T1,SYVER,(T3) ;STORE IN HEADER
SETONE SYT20,(T3) ;NOTE THAT THIS ENTRY MADE BY TOPS-20
GTAD ;GET CURRENT TIME AND DATE
STOR T1,SYDAT,(T3) ;STORE TIME AND DATE IN ENTRY
TIME ;GET CURRENT UPTIME
IDIV T1,[<^D1000*^D3600*^D24>/<1_^D18>] ;CONVERT TO DAYS,,FRACTIONS OF DAYS
STOR T1,SYUPT,(T3) ;STORE UPTIME IN ENTRY HEADER
MOVE T1,[SIXBIT/APRID/] ;GET TABLE NAME
SYSGT ;GET PROCESSOR SERIAL NUMBER
STOR T1,SYPSN,(T3) ;SAVE PROCESSOR SERIAL NUMBER
RET ;DONE, RETURN
;SYRSTR - ROUTINE TO ADD A STRING TO A SYSERR ENTRY
;
;ACCEPTS IN T1/ BASE ADDRESS OF SYSERR ENTRY
; T2/ POINTER TO ASCIZ STRING TO ADD
; T3/ DESTINATION ADDRESS IN ENTRY FOR STRING
; CALL SYRSTR
;RETURNS: +1 FAILED
; +2 SUCCESS, WITH T1/ ADDRESS OF NEXT WORD TO USE IN SYSERR ENTRY
; T2/ -WORD COUNT,,OFFSET TO STRING
SYRSTR: ASUBR <STRBLK,STRSTR,STRDST,STROFS>
MOVE T4,STRDST ;COPY ADDRESS WHERE NAME WILL GO
SUBI T4,.SYDAT(T1) ;COMPUTE OFFSET TO NAME IN ENTRY
MOVE T1,STRDST ;GET DESTINATION ADDRESS FOR STRING
HRLI T1,(POINT 7,) ;FORM POINTER TO WHERE STRING GOES
MOVE T2,STRSTR ;GET POINTER TO ASCIZ NODE NAME
SETZM T3 ;TERMINATE ON NULL
SOUT ;ADD NODE NAME TO SYSERR ENTRY
IBP T1 ;INCREMENT POINTER FOR MULTIPLES OF 5 BYTES
HRRZ T2,T1 ;COPY CURRENT ADDRESS
MOVE T3,STRDST ;GET DESTINATION ADDRESS AGAIN
SUBI T2,-1(T3) ;COMPUTE NUMBER OF WORDS USED
MOVN T2,T2 ;COMPUTE -WORD COUNT
HRL T4,T2 ;COMPUTE -WORD COUNT,,OFFSET
MOVE T2,T4 ;COPY -WORD COUNT,,OFFSET TO STRING
MOVEI T1,1(T1) ;POINT TO NEXT WORD IN SYSERR ENTRY
RETSKP ;DONE, RETURN
;SYRLOD - ROUTINE TO MAKE A SYSERR ENTRY WHEN A NODE IS LOADED
;
;ACCEPTS IN T1/ NICE RETURN CODE
; CALL SYRLOD
;RETURNS: +1 ALWAYS
SYRLOD: ASUBR <SYLCOD,SYLTGT,SYLSRV,SYLSVL>
STKVAR <SYLFIL,SYLSIZ,SYLBLK>
; ALLOCATE A BLOCK FOR THE SYSERR ENTRY
MOVX T1,MAXSYE ;GET MAX SIZE OF SYSERR ENTRIES
CALL GETFRE ;GO GET SOME FREE SPACE
RETBAD (.NRRES) ;FAILED, RESOURCE ERROR
ADDI T1,1 ;ALLOW FOR BLOCK HEADER
MOVEM T1,SYLBLK ;SAVE ADDRESS OF SYSERR BLOCK
MOVE T4,SYLBLK ;GET ADDRESS OF SYSERR ENTRY
HRROI T1,.SYLDD(T4) ;FORM POINTER TO DESTINATION
; PUT TARGET NODE NAME INTO ENTRY
HRRZM T1,SYLTGT ;SAVE ADDRESS OF TARGET NAME
MOVE T2,RQLTGT ;GET POINTER TO NAME OF TARGET NODE
SETZM T3 ;ASCIZ STRING, ENDS IN NULL
SOUT ;PUT THE TARGET NODE NAME INTO ENTRY
ERJMP .+1 ;DO NOT DIE ON ERRORS
IBP T1 ;POINT TO TERMINATING CHARACTER
HRROI T1,1(T1) ;FORM POINTER TO NEXT STRING IN ENTRY
; PUT NAME OF SERVER NODE INTO SYSERR ENTRY
HRRZM T1,SYLSRV ;SAVE ADDRESS OF SERVER NODE NAME
MOVE T2,RQLSRV ;GET POINTER TO NAME OF SERVER NODE
SOUT ;ADD SERVER NODE NAME STRING TO ENTRY
ERJMP .+1 ;DO NOT DIE ON ERRORS
IBP T1 ;POINT TO TERMINATING CHARACTER
HRROI T1,1(T1) ;FORM POINTER TO NEXT STRING IN ENTRY
; PUT NAME OF SERVER LINE INTO SYSERR ENTRY
HRRZM T1,SYLSVL ;SAVE ADDRESS OF SERVER LINE NAME
DMOVE T2,RQLLIN ;GET SERVER LINE ID
CALL ASCLIN ;OUTPUT LINE AS ASCIZ
JFCL ;IGNORE ERROR
IBP T1 ;POINT TO TERMINATING CHARACTER
HRROI T1,1(T1) ;FORM POINTER TO NEXT STRING IN ENTRY
; ..
; ..
; PUT FILE-SPEC INTO SYSERR ENTRY
HRRZM T1,SYLFIL ;SAVE ADDRESS OF FILESPEC
MOVE T2,RQLOPS ;GET POINTER TO OPERATING SYSTEM FILE
SETZM T3 ;TERMINATE ON NULL
SOUT ;ADD FILE SPEC TO SYSERR ENTRY
ERJMP .+1 ;DO NOT DIE ON ERRORS
IBP T1 ;POINT TO TERMINATING CHARACTER
; ADD NICE RETURN CODE AND OFFSETS TO ENTRY
HRRZI T1,1(T1) ;KEEP JUST ADDRESS
SUB T1,SYLBLK ;COMPUTE SIZE OF SYSERR BLOCK
MOVEM T1,SYLSIZ ;SAVE SIZE OF SYSERR BLOCK
MOVE T4,SYLBLK ;GET ADDRESS OF SYSERR ENTRY
MOVE T2,SYLCOD ;GET NICE RETURN CODE
STOR T2,SYRCD,(T4) ;STORE RETURN CODE IN ENTRY
MOVEI T3,.SYDAT(T4) ;OFFSETS ARE FROM END OF HEADER
MOVE T2,SYLTGT ;GET ADDRESS OF TARGET STRING
SUB T2,t3 ;COMPUTE OFFSET INTO SYSERR BLOCK
STOR T2,SYTGT,(T4) ;STORE OFFSET TO TARGET NODE NAME
MOVE T2,SYLSRV ;GET ADDRESS OF SERVER NODE NAME
SUB T2,T3 ;COMPUTE OFFSET INTO SYSERR BLOCK
STOR T2,SYSRV,(T4) ;STORE OFFSET TO SERVER NODE NAME
MOVE T2,SYLSVL ;GET ADDRESS OF SERVER LINE STRING
SUB T2,T3 ;COMPUTE OFFSET INTO SYSERR BLOCK
STOR T2,SYSVL,(T4) ;STORE OFFSET TO SERVER LINE NAME
MOVE T2,SYLFIL ;GET ADDRESS OF FILESPEC
SUB T2,T3 ;COMPUTE OFFSET INTO SYSERR BLOCK
STOR T2,SYFIL,(T4) ;STORE OFFSET TO FILE SPEC
MOVEI T1,SY%LOD ;ASSUME LOADING OPERATION
MOVE T2,SYLSIZ ;GET SIZE OF ENTRY
SUBI T2,.SYDAT ;COMPUTE SIZE OF ENTRY MINUS HEADER
MOVE T3,SYLBLK ;GET ADDRESS OF ENTRY
CALL SYRHDR ;GO MAKE THE SYSERR HEADER
MOVE T1,SYLBLK ;GET ADDRESS OF SYSERR BLOCK
MOVE T2,SYLSIZ ;GET BACK SIZE OF BLOCK
SYERR ;MAKE A SYSERR ENTRY
ERJMP .+1 ;DO NOT DIE IF THIS FAILS
; RELEASE SYSERR BLOCK AND RETURN
MOVE T1,SYLBLK ;GET ADDRESS OF SYSERR BLOCK
SUBI T1,1 ;RESTORE FREE BLOCK ADDRESS
CALL RELFRE ;RELEASE THE BLOCK
FATAL.ERROR ; Die on release failure
RET ;DONE, RETURN
;SYRDMP - ROUTINE TO MAKE A SYSERR ENTRY WHEN A NODE IS DUMPED
;
;ACCEPTS IN T1/ NICE RETURN CODE
; CALL SYRDMP
;RETURNS: +1 ALWAYS
SYRDMP: ASUBR <SYDCOD,SYDTGT,SYDSRV,SYDSVL>
STKVAR <SYDFIL,SYDSIZ,SYDBLK>
; ALLOCATE A BLOCK FOR THE SYSERR ENTRY
MOVX T1,MAXSYE ;GET MAX SIZE OF SYSERR ENTRIES
CALL GETFRE ;GO GET SOME FREE SPACE
RETBAD (.NRRES) ;FAILED, RESOURCE ERROR
ADDI T1,1 ;ALLOW FOR BLOCK HEADER
MOVEM T1,SYDBLK ;SAVE ADDRESS OF SYSERR BLOCK
MOVE T4,SYDBLK ;GET ADDRESS OF SYSERR ENTRY
HRROI T1,.SYLDD(T4) ;FORM POINTER TO DESTINATION
; PUT TARGET NODE NAME INTO ENTRY
HRRZM T1,SYDTGT ;SAVE ADDRESS OF TARGET NAME
MOVE T2,RQDTGT ;GET POINTER TO NAME OF TARGET NODE
SETZM T3 ;ASCIZ STRING, ENDS IN NULL
SOUT ;PUT THE TARGET NODE NAME INTO ENTRY
ERJMP .+1 ;DO NOT DIE ON ERRORS
IBP T1 ;POINT TO TERMINATING CHARACTER
HRROI T1,1(T1) ;FORM POINTER TO NEXT STRING IN ENTRY
; PUT NAME OF SERVER NODE INTO SYSERR ENTRY
HRRZM T1,SYDSRV ;SAVE ADDRESS OF SERVER NODE NAME
MOVE T2,RQDSRV ;GET POINTER TO NAME OF SERVER NODE
SOUT ;ADD SERVER NODE NAME STRING TO ENTRY
ERJMP .+1 ;DO NOT DIE ON ERRORS
IBP T1 ;POINT TO TERMINATING CHARACTER
HRROI T1,1(T1) ;FORM POINTER TO NEXT STRING IN ENTRY
; PUT NAME OF SERVER LINE INTO SYSERR ENTRY
HRRZM T1,SYDSVL ;SAVE ADDRESS OF SERVER LINE NAME
DMOVE T2,RQDLIN ;GET SERVER LINE ID
CALL ASCLIN ;OUTPUT LINE AS ASCIZ
JFCL ;IGNORE ERROR
IBP T1 ;POINT TO TERMINATING CHARACTER
HRROI T1,1(T1) ;FORM POINTER TO NEXT STRING IN ENTRY
; ..
; ..
; PUT FILE-SPEC INTO SYSERR ENTRY
HRRZM T1,SYDFIL ;SAVE ADDRESS OF FILESPEC
MOVE T2,RQDFIL ;GET POINTER TO OPERATING SYSTEM FILE
SETZM T3 ;TERMINATE ON NULL
SOUT ;ADD FILE SPEC TO SYSERR ENTRY
ERJMP .+1 ;DO NOT DIE ON ERRORS
IBP T1 ;POINT TO TERMINATING CHARACTER
; ADD NICE RETURN CODE AND OFFSETS TO ENTRY
HRRZI T1,1(T1) ;KEEP JUST ADDRESS
SUB T1,SYDBLK ;COMPUTE SIZE OF SYSERR BLOCK
MOVEM T1,SYDSIZ ;SAVE SIZE OF SYSERR BLOCK
MOVE T4,SYDBLK ;GET ADDRESS OF SYSERR ENTRY
MOVE T2,SYDCOD ;GET NICE RETURN CODE
STOR T2,SYRCD,(T4) ;STORE RETURN CODE IN ENTRY
MOVEI T3,.SYDAT(T4) ;OFFSETS ARE FROM END OF HEADER
MOVE T2,SYDTGT ;GET ADDRESS OF TARGET STRING
SUB T2,t3 ;COMPUTE OFFSET INTO SYSERR BLOCK
STOR T2,SYTGT,(T4) ;STORE OFFSET TO TARGET NODE NAME
MOVE T2,SYDSRV ;GET ADDRESS OF SERVER NODE NAME
SUB T2,T3 ;COMPUTE OFFSET INTO SYSERR BLOCK
STOR T2,SYSRV,(T4) ;STORE OFFSET TO SERVER NODE NAME
MOVE T2,SYDSVL ;GET ADDRESS OF SERVER LINE STRING
SUB T2,T3 ;COMPUTE OFFSET INTO SYSERR BLOCK
STOR T2,SYSVL,(T4) ;STORE OFFSET TO SERVER LINE NAME
MOVE T2,SYDFIL ;GET ADDRESS OF FILESPEC
SUB T2,T3 ;COMPUTE OFFSET INTO SYSERR BLOCK
STOR T2,SYFIL,(T4) ;STORE OFFSET TO FILE SPEC
MOVEI T1,SY%DMP ;ASSUME DUMPING OPERATION
MOVE T2,SYDSIZ ;GET SIZE OF ENTRY
SUBI T2,.SYDAT ;COMPUTE SIZE OF ENTRY MINUS HEADER
MOVE T3,SYDBLK ;GET ADDRESS OF ENTRY
CALL SYRHDR ;GO MAKE THE SYSERR HEADER
MOVE T1,SYDBLK ;GET ADDRESS OF SYSERR BLOCK
MOVE T2,SYDSIZ ;GET BACK SIZE OF BLOCK
SYERR ;MAKE A SYSERR ENTRY
ERJMP .+1 ;DO NOT DIE IF THIS FAILS
; RELEASE SYSERR BLOCK AND RETURN
MOVE T1,SYDBLK ;GET ADDRESS OF SYSERR BLOCK
SUBI T1,1 ;RESTORE FREE BLOCK ADDRESS
CALL RELFRE ;RELEASE THE BLOCK
FATAL.ERROR ; Die on release failure
RET ;DONE, RETURN
;SYRNCU - ROUTINE TO MAKE A SYSERR ENTRY WHEN NETCON IS STARTED UP
;
;CALL: CALL SYRNCU
;RETURNS: +1 ALWAYS
SYRNCU::STKVAR <SYNBLK,SYNSIZ,SYNOFS>
; ALLOCATE A BLOCK FOR THE SYSERR ENTRY
MOVX T1,MAXSYE ;GET MAX SIZE OF SYSERR ENTRIES
CALL GETFRE ;GO GET SOME FREE SPACE
RETBAD (.NRRES) ;FAILED, RESOURCE ERROR
ADDI T1,1 ;ALLOW FOR BLOCK HEADER
MOVEM T1,SYNBLK ;SAVE ADDRESS OF SYSERR BLOCK
; ASSEMBLE THE SYSERR ENTRY
MOVE T4,SYNBLK ;GET ADDRESS OF SYSERR ENTRY
MOVX T1,VNETCON ;GET NETCON VERSION NUMBER
STOR T1,SYNCV,(T4) ;ADD NETCON VERSION NUMBER TO ENTRY
HRROI T1,.SYNDD(T4) ;FORM POINTER TO DESTINATION
HRROI T2,OURNAM ;GET POINTER TO THIS NODE'S NAME
SETZM T3 ;TERMINATE ON NULL
SOUT ;ADD NODE NAME TO ENTRY
ERJMP .+1 ;DO NOT CRUMP ON ERROR
MOVE T3,T1 ;COPY FINAL DESTINATION POINTER
SUBI T3,.SYNDD-1(T4) ;COMPUTE NUMBER OF WORDS IN STRING
MOVN T3,T3 ;FORM WORD COUNT
HRL T3,T3 ;FORM -WORD COUNT,,0
HRRI T3,.SYNDD-.SYDAT ;GET OFFSET TO NODE NAME STRING
STOR T3,SYNAM,(T4) ;ADD OFFSET TO NODE NAME TO ENTRY
HRROI T1,1(T1) ;POINT TO START OF NEXT WORD
HRRZM T1,SYNOFS ;SAVE OFFSET TO PROGRAM NAME
HRROI T2,[ASCIZ/NETCON/] ;GET PROGRAM NAME
SETZM T3 ;TERMINATE ON NULL
SOUT ;ADD PROGRAM NAME TO ENTRY
ERJMP .+1 ;CONTINUE ON ERRORS
MOVE T3,T1 ;COPY FINAL DESTINATION POINTER
SUB T3,SYNOFS ;COMPUTE WORD COUNT-1
MOVNI T3,1(T3) ;COMPUTE -WORD COUNT
HRL T3,T3 ;FORM -WORD COUNT,,0
HRRZ T2,SYNOFS ;GET OFFSET TO START OF PROGRAM NAME
SUBI T2,.SYDAT(T4) ;COMPUTE OFFSET TO PROGRAM NAME STRING
HRR T3,T2 ;COMPUTE -WORD COUNT,,OFFSET
STOR T3,SYPGM,(T4) ;STORE OFFSET TO PROGRAM NAME
HRRZI T1,1(T1) ;COMPUTE THE SIZE OF THIS
SUB T1,T4 ; SYSERR ENTRY
MOVEM T1,SYNSIZ ;SAVE ENTRY SIZE
MOVEI T2,-.SYDAT(T1) ;GET JUST SIZE OF DATA PORTION
MOVEI T1,SY%NCU ;GET NETCON-STARTED ENTRY TYPE
MOVE T3,SYNBLK ;GET ADDRESS OF SYSERR ENTRY
CALL SYRHDR ;ADD THE HEADER INFO TO THE ENTRY
; ..
; ..
; MAKE THE SYSERR ENTRY
MOVE T1,SYNBLK ;GET ADDRESS OF SYSERR BLOCK
MOVE T2,SYNSIZ ;GET SIZE OF THE ENTRY
SYERR ;MAKE A SYSERR ENTRY
ERJMP .+1 ;FAILED, IGNORE FAILURE
MOVE T1,SYNBLK ;GET ADDRESS OF SYSERR BLOCK
SUBI T1,1 ;RESTORE ADDRESS OF FREE BLOCK
CALL RELFRE ;RELEASE THE BLOCK
FATAL.ERROR ; Die on release failure
RET ;DONE, RETURN
SUBTTL Network Topology Change Server
;ADVTOP - ROUTINE TO ADVISE THE MONITOR OF TOPOLOGY CHANGES
;
;ACCEPTS IN T1/ ADDRESS OF TOPOLOGY CHANGE PROTOCOL MESSAGE
; T2/ NUMBER OF BYTES IN MESSAGE
; CALL ADVTOP
;RETURNS: +1 FAILED
; +2 SUCCESS, WITH MONITOR NOTIFIED
ADVTOP::SAVEPQ
TRVAR <ADVPTR,ADVCNT,ADVUNI,ADVLST,ADVHST>
STKVAR <<ADVSTR,2>,<ADVSTK,30>>
MOVEM T1,ADVPTR ;SAVE POINTER TO MESSAGE
MOVEM T2,ADVCNT ;SAVE NUMBER OF BYTES IN MESSAGE
MOVEM T3,ADVHST ;SAVE POINTER TO HOST NODE NAME
SETZM ADVLST ;INITIALIZE ADR OF NODE LIST
; SET UP STACK OF BLOCKS TO RELEASE ON CLEANUP
HRRI P2,ADVSTK ;GET ADDRESS OF BLOCK STACK
SUBI P2,1 ;FORM STACK POINTER TO
HRLI P2,-30 ; CLEANUP PDL
; ASSIGN SPACE FOR NEW NODE LIST
MOVX T1,MAXTOP ;NUMBER OF NODES PLUS BLOCK HEADER
CALL GETFRE ;GET SOME FREE SPACE
RETBAD (.NRRES) ;No more free space .. give error return
ADDI T1,1 ;POINT TO START OF LIST
MOVEM T1,ADVLST ;SAVE ADDRESS OF NODE LIST
MOVX T4,MAXTOP ;GET MAX SIZE OF NODE LIST
MOVEM T4,(T1) ;INITIALIZE NODE LIST TABLE (TBLUK FORMAT)
; ASSIGN FREE SPACE FOR THE NODE JSYS ARG BLOCK
MOVX T1,^D300 ;ALLOCATE LOTS OF SPACE FOR MANY NODE UNITS
CALL GETFRE ;ASSIGN SPACE
JRST ADVTPX ;GO CLEAN UP FREE SPACE AND RETURN ERROR
PUSH P2,T1 ;SAVE ADDRESS OF BLOCK ON CLEANUP STACK
ADDI T1,1 ;POINT PAST BLOCK HEADER
MOVE Q1,T1 ;SAVE ADDRESS OF NODE JSYS ARG BLOCK
MOVEI P1,.NDBK1(T1) ;GET POINTER TO NEXT ARG BLOCK ADR TO USE
; FIRST FIELD MUST BE THE COUNT OF THE NUMBER OF NODE UNITS FOLLOWING
SOSGE ADVCNT ;AT LEAST ONE BYTE ?
RETBAD (.NRIMF) ;NO, FAIL
ILDB T4,ADVPTR ;YES, GET FIELD TYPE
CAIE T4,.TPCNT ;COUNT OF NODE UNITS TO FOLLOW ?
JRST ADVTPX ;NO, FAIL
SOSGE ADVCNT ;AT LEAST ONE BYTE ?
RETBAD (.NRIMF) ;NO, FAIL
ILDB T4,ADVPTR ;GET NUMBER OF NODE UNITS
MOVEM T4,ADVUNI ;SAVE NUMBER OF NODE UNITS TO FOLLOW
MOVEM T4,.NDNND(Q1) ;STORE NUMBER OF NODE UNITS IN NODE JSYS BLOCK
; PROCESS THE NEXT NODE UNIT IN THE MESSAGE
ADVT10: SOSGE ADVUNI ;ANOTHER NODE UNIT TO PROCESS ?
JRST [ SKIPE ADVCNT ;NO. SHOULD BE NO MORE BYTES IN MESSAGE
JRST ADVTPX ;FAIL, MESSAGE TOO LONG
JRST ADVT30 ] ;DONE, NOTIFY MONITOR OF NEW TOPOLOGY
MOVEI P4,0 ;INITIALIZE "LAST FIELD TYPE" SEEN
MOVX T1,.NDNBS+1 ;GET NUMBER OF WORDS FOR NODE UNIT
CALL GETFRE ;ASSIGN A FREE BLOCK FOR NODE UNIT
JRST ADVTPX ;FAILED, GO CLEAN UP
PUSH P2,T1 ;ADD BLOCK TO CLEANUP LIST
ADDI T1,1 ;POINT PAST HEADER BLOCK
MOVEM T1,(P1) ;STORE POINTER TO NODE UNIT IN ARG BLOCK
MOVE P3,T1 ;GET ADDRESS OF NODE UNIT
; EXTRACT AND PROCESS EACH FIELD OF THE MESSAGE
ADVT20: SOSGE T2,ADVCNT ;AT LEAST ONE BYTE ?
JRST ADVT30 ;NO, MUST BE END OF MESSAGE
ILDB T4,ADVPTR ;YES, GET FIELD TYPE
CAIL T4,FTPLEN ;WITHIN VALID RANGE ?
JRST ADVTPX ;NO, FAIL
CAMG T4,P4 ;NEXT FIELD HAVE HIGHER FIELD TYPE THAN LAST ?
JRST ADVT25 ;NO, MUST BE NEXT NODE UNIT
MOVE P4,T4 ;UPDATE "LAST FIELD SEEN"
MOVE T1,ADVPTR ;GET POINTER TO NEXT FIELD IN MESSAGE
CALL @FTPTAB(T4) ;YES, DISPATCH BASED ON FUNCTION CODE
JRST ADVTPX ;FAILED, GO CLEAN UP
JRST ADVT20 ;GO EXTRACT NEXT FIELD FROM MESSAGE
; HERE AT END OF EACH NODE UNIT
ADVT25: SETOM T4 ;DECREMENT BYTE POINTER BY ONE
ADJBP T4,ADVPTR ; BYTE BECAUSE WE'VE ALREADY PROCESSED
MOVEM T4,ADVPTR ; FIRST BYTE OF THE NEXT NODE UNIT
AOS ADVCNT ;AND UNDO DECREMENTING OF COUNT
ADDI P1,1 ;POINT TO WHERE ADR OF NEXT NODE UNIT GOES
JRST ADVT10 ;GO PROCESS NEXT NODE UNIT
; TABLE OF TOPOLOGY PROTOCOL FIELD PROCESSING ROUTINES
FTPTAB: RET ; 0 ILLEGAL
TPNOD ; 1 NODE NAME
TPNUM ; 2 NODE NUMBER
TPNST ; 3 NODE STATE
TPLID ; 4 LINE ID
TPLST ; 5 LINE STATE
TPVER ; 6 VERSION INFO
TPUNI ; 7 NODE UNITS TO FOLLOW
FTPLEN==.-FTPTAB
; HERE WHEN DONE WITH ALL NODE UNITS
ADVT30: MOVX T1,.NDSNT ;GET "SET NETWORK TOPOLOGY" FUNCTION CODE
MOVE T2,Q1 ;GET ADDRESS OF NODE JSYS ARG BLOCK
MOVX T4,.NDNBS ;GET SIZE OF A NODE BLOCK
MOVEM T4,.NDCNT(T2) ;STORE IN ARG BLOCK
NODE ;TELL MONITOR ABOUT NETWORK TOPOLOGY
ERJMP ADVTPX ;FAILED, CLEAN UP AND RETURN ERROR
; CLEAN UP ALL THE FREE BLOCKS ON THE BLOCK STACK
ADVT40: HLRE T1,P2 ;GET STACK COUNTER
CAMG T1,[-30] ;MORE BLOCKS ON STACK ?
JRST [ MOVE T1,ADVLST ;NO, GET ADDRESS OF NODE LIST
RETSKP ] ;DONE. RETURN SUCCESS
POP P2,T1 ;YES, GET BLOCK ADDRESS
CALL RELFRE ;RELEASE THE BLOCK
FATAL.ERROR ;FAILED
JRST ADVT40 ;LOOP OVER ALL BLOCKS ASSIGNED
; HERE ON AN ERROR TO CLEAN UP THE FREE BLOCKS
ADVTPX: MOVE T1,ADVLST ;GET ADDRESS OF NODE LIST
CALL TOPFRE ;Release the topology table
ADVTX1: HLRE T1,P2 ;GET STACK COUNTER
CAMG T1,[-30] ;MORE BLOCKS ON STACK ?
RET ;NO, DONE. RETURN FAILURE
POP P2,T1 ;YES, GET BLOCK ADDRESS
CALL RELFRE ;RELEASE THE BLOCK
FATAL.ERROR ;FAILED
JRST ADVTX1 ;LOOP OVER ALL BLOCKS ASSIGNED
; ROUTINES TO PROCESS FIELDS FROM TOPOLOGY CHANGE MESSAGES
TPNOD: MOVEI T3,ADVSTR ;GET ADDRESS OF TEMPORARY STRING AREA
HRLI T3,(POINT 7,) ;FORM POINTER TO TEMPORARY STRING DESTINATION
CALL GETIMA ;GET NODE NAME FROM MESSAGE
RET ;FAILED, RETURN ERROR
MOVEM T1,ADVPTR ;SAVE POINTER TO NEXT FIELD
MOVEM T2,ADVCNT ;SAVE COUNT OF REMAINING BYTES
MOVEI T1,0 ;NO OLD BLOCK TO RELEASE
MOVEI T2,ADVSTR ;GET ADDRESS WHERE STRING IS
HRLI T2,(POINT 7,) ;FORM POINTER TO STRING
MOVX T3,2 ;NODE NAMES ARE TWO WORDS MAX
CALL CPYASC ;PUT NODE NAME IN A BLOCK
RET ;FAILED, RETURN ERROR
MOVEM T1,.NDNAM(P3) ;STORE POINTER TO NODE NAME
HRLZI T2,1(T1) ;GET ADDRESS OF NODE NAME STRING
MOVE T1,ADVLST ;GET ADDRESS OF NODE LIST
TBADD ;ADD THIS NODE TO NODE LIST
ERJMP R ;FAILED
MOVE T1,.NDNAM(P3) ;GET NODE NAME POINTER
MOVE T2,ADVHST ;GET POINTER TO SOURCE NODE NAME
CALL STOHST ;STORE SOURCE NODE NAME IF NEEDED
RETBAD () ;FAILED
RETSKP ;DONE, RETURN SUCCESS
TPNUM: CALL GETEXB ;GET NODE NUMBER FROM MESSAGE
RET ;FAILED, RETURN ERROR
MOVEM T1,ADVPTR ;SAVE POINTER TO NEXT FIELD
MOVEM T2,ADVCNT ;SAVE COUNT OF ITEMS IN MESSAGE
;IGNORE NODE NUMBER
RETSKP ;DONE, RETURN SUCCESS
TPNST: SOSGE ADVCNT ;AT LEAST ONE BYTE IN THE MESSAGE ?
RET ;NO, FAIL
ILDB T4,ADVPTR ;YES, SKIP NODE STATE
MOVEM T4,.NDSTA(P3) ;STORE STATE IN NODE BLOCK
SOSGE ADVCNT ;ANOTHER BYTE IN MESSAGE ?
RET ;NO, FAIL
IBP ADVPTR ;YES, SKIP NODE TYPE
RETSKP ;DONE, RETURN SUCCESS
TPLID: SUBI T2,5 ;ENOUGH BYTES IN MESSAGE FOR A LINE ID ?
JUMPL T2,R ;NO, FAIL
MOVEM T2,ADVCNT ;SAVE NEW BYTE COUNT
MOVX T1,5 ;GET NUMBER OF BYTES IN LINE ID
ADJBP T1,ADVPTR ;SKIP OVER LINE ID IN MESSAGE
MOVEM T1,ADVPTR ;SAVE POINTER TO NEXT FIELD
RETSKP ;DONE, RETURN SUCCESS
TPLST: SOSGE ADVCNT ;AT LEAST ONE MORE BYTE ?
RET ;NO, FAIL
IBP ADVPTR ;YES, SKIP TO NEXT FIELD IN MESSAGE
RETSKP ;DONE, RETURN SUCCESS
TPVER: RET ;FAIL, VERSION SHOULD NOT APPEAR IN MIDDLE
; OF TOPOLOGY INFORMATION
TPUNI: RET ;FAIL, SHOULD NOT SEE NODE UNIT COUNT
;STOHST - ROUTINE TO STORE THE SOURCE NODE NAME IN THE NODE BLOCK
;
;ACCEPTS IN T1/ POINTER TO NAME OF THIS NODE
; T2/ POINTER TO NAME OF SOURCE NODE
; CALL STOHST
;RETURNS: +1 FAILED
; +2 SUCCESS, POINTER STORED IF NEEDED
STOHST: ASUBR <STHNOD,STHHST>
MOVE T1,STHNOD ;GET POINTER TO NODE NAME
MOVE T2,STHHST ;GET POINTER TO SOURCE NODE NAME
STCMP ;DID SOURCE TELL US ABOUT ITSELF ?
ERJMP R ;FAILED, RETURN ERROR
JUMPE T1,RSKP ;YES, DO NOT STORE SOURCE NAME
MOVE T1,STHNOD ;GET NODE NAME
HRROI T2,OURNAM ;GET POINTER TO OUR NODE NAME
STCMP ;DID SOURCE NODE TELL US ABOUT US ?
ERJMP R ;FAILED, RETURN ERROR
JUMPE T1,RSKP ;YES, DO NOT STORE SOURCE NAME
MOVE T1,STHHST ;NO, GET SOURCE NODE NAME
MOVEM T1,.NDNXT(P3) ;STORE IN NODE BLOCK
RETSKP ;DONE, RETURN
;TOPFRE - Routine to release a topology table.
;
;Accepts in T1/ Address of topology table.
;
;Returns: +1 Always
TOPFRE:: ASUBR <TOPTBL> ; Address of topology table
JUMPE T1,R ; If no address given .. just return
PUSH P,P1 ; Save a register
HLRZ P1,(T1) ; Get count of entries in table
MOVNI P1,1(P1) ; Put count in LH for AOBJP index
HRLZS P1
HRRI P1,(T1) ; Get address of start of table
TPF.1: AOBJP P1,TPF.D ; If no more entries .. return table block
SKIPN T1,(P1) ; Get address of node name entry
JRST TPF.1 ; Not really there if zero .. move on
HLRZS T1 ; Put into right half
SUBI T1,1 ; Point to beginning of allocated block
CALL RELFRE ; Release the block
FATAL.ERROR ; Couldn't do it .. die
JRST TPF.1 ; Go release the next entry
TPF.D: MOVE T1,TOPTBL ; Get address of table again
SUBI T1,1 ; Point to actual allocated block
CALL RELFRE ; Release the table
FATAL.ERROR ; Can't so crap out
POP P,P1 ; Restore register (inane comment)
RET ; Return to caller
SUBTTL Utility Routines
;STOSTR - ROUTINE TO STORE A STRING IN THE GENERAL STRING AREA
;
;ACCEPTS IN T1/ CURRENT ADDRESS OF STRING
; CALL STOSTR
;RETURNS: +1 FAILED, INSUFFICIENT ROOM TO STORE STRING
; +2 SUCCESS, WITH T1/ ADDRESS OF STRING IN STRING AREA
STOSTR: HRLI T1,(POINT 7) ;FORM POINTER TO EXISTING STRING
MOVE T2,STRPTR ;GET POINTER TO WHERE STRING WILL GO
MOVN T3,STRSIZ ;GET # OF WORDS REMAINING IN STRING STORAGE AREA
IMULI T3,NCHPW ;COMPUTE -# OF CHARACTERS REMAINING IN AREA
; LOOP OVER EACH CHARACTER IN THE STRING, MOVING IT TO THE STRING AREA
STOST2: AOJG T3,R ;RETURN FAILURE IF NO ROOM FOR NEXT CHARACTER
ILDB T4,T1 ;GET NEXT CHARACTER IN STRING
IDPB T4,STRPTR ;STORE CHARACTER IN STRING AREA
JUMPN T4,STOST2 ;IF NOT NULL, GO MOVE NEXT CHARACTER
AOS T1,STRPTR ;POINT TO NEXT FREE LOCATION IN STRING AREA
HRLI T1,(POINT 7,) ;POINT TO FIRST CHARACTER IN NEXT WORD
MOVEM T1,STRPTR ;SAVE NEW POINTER TO FREE LOC IN STRING AREA
MOVE T4,STREND ;GET ADDRESS OF LAST LOCATION IN STRING AREA
SUBI T4,1(T1) ;COMPUTE LENGTH OF REMAINING STRING AREA
MOVEM T4,STRSIZ ;SAVE NUMBER OF WORDS LEFT IN STRING AREA
MOVE T1,T2 ;GET ORIGINAL POINTER TO STRING
RETSKP ;RETURN SUCCESS
;CLRMOP - ROUTINE TO CLEAR THE MOP MESSAGE AREA
;
;CALL: CALL CLRMOP
;RETURNS: +1 ALWAYS
CLRMOP: HRRI T1,1+MOPMSG ;GET ADDRESS OF MOP MESSAGE AREA + 1
HRLI T1,-1(T1) ;FORM ADDRESS,,ADDRESS+1 FOR BLT
SETZM MOPMSG ;CLEAR THE FIRST WORD OF THE AREA
BLT T1,MOPSIZ-1+MOPMSG ;CLEAR REMAINDER OF MOP MESSAGE AREA
RET ;RETURN
;CLRBOT - ROUTINE TO CLEAR THE BOOT JSYS ARGUMENT BLOCK
;
;CALL: CALL CLRBOT
;RETURNS: +1 ALWAYS
CLRBOT: HRRI T1,1+BTARG ;GET ADDRESS OF BOOT JSYS ARG BLOCK+1
HRLI T1,-1(T1) ;FORM ADDRESS,,ADDRESS+1 FOR BLT
SETZM BTARG ;CLEAR THE FIRST WORD OF THE AREA
BLT T1,BTSIZ-1+BTARG ;CLEAR REMAINDER OF AREA
RET ;RETURN
;CLRMSG - ROUTINE TO CLEAR THE NICE MESSAGE BLOCK
;
;CALL: CALL CLRMSG
;RETURNS: +1 ALWAYS
CLRMSG: HRRI T1,1+MSGBLK ;GET ADDRESS OF NICE MESSAGE AREA + 1
HRLI T1,-1(T1) ;FORM ADDRESS,,ADDRESS+1 FOR BLT
SETZM MSGBLK ;CLEAR THE FIRST WORD OF THE AREA
BLT T1,MSGSIZ-1+MSGBLK ;CLEAR REMAINDER OF NICE MESSAGE AREA
RET ;RETURN
;CHKLIN - ROUTINE TO CHECK A STANDARD NICE LINE ID
;
;ACCEPTS IN T3/ LINE DEVICE TYPE (.DTXXX),,LINE CONTROLLER NUMBER
; T4/ LINE UNIT NUMBER,,STATION ADDRESS
; CALL CHKLIN
;RETURNS: +1 FAILED, NO SUCH LINE. NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ DTE20 NUMBER
CHKLIN: HLRZ T1,T3 ;GET DEVICE TYPE CODE
CAIE T1,.DTDTE ;DTE TYPE DEVICE ?
RETBAD (.NRILN) ;NO, RETURN "INVALID LINE ID"
HRRZ T1,T4 ;GET STATION ADDRESS
JUMPN T1,[RETBAD (.NRILN)] ;RETURN ERROR IF NOT CONTROLLER 0
HRRZ T1,T3 ;GET CONTROLLER NUMBER (DTE20 NUMBER)
RETSKP ;DONE, RETURN SUCCESS
;SETPGM - ROUTINE TO GET A POINTER TO A FILESPEC GIVEN A PROGRAM TYPE
; AND A LOAD DEVICE.
;
;CALL: CALL SETPGM
;RETURNS: +1 FAILED, NO FILESPEC FOR THAT DEVICE/PROGRAM
; +2 SUCCESS, WITH T1/ POINTER TO ASCIZ FILESPEC
SETPGM: STKVAR <SPGTAB>
; DETERMINE IF PROGRAM ABOUT TO BE LOADED IS AN OPERATING SYSTEM OR
; A BOOTSTRAP PROGRAM.
MOVE T1,RQLPGM ;GET PROGRAM TYPE TO BE LOADED (.PTXXX)
CAIN T1,.PTOPS ;ABOUT TO LOAD AN OPERATING SYSTEM ?
JRST [ MOVE T1,rqlops ;YES, GET POINTER TO PRIMARY FILESPEC
RETSKP ] ;DONE, RETURN SUCCESS
; LOADING A BOOTSTRAP - DETERMINE FILESPEC BASED ON LOAD DEVICE AND CPU
MOVE T4,[-MAXPGM,,PGMTAB] ;SET UP TO LOOP OVER ALL PROGRAM TABLE ENTRIES
SPGM10: LOAD T1,PGLDV,(T4) ;GET LOAD DEVICE FROM THIS TABLE ENTRY
CAME T1,RQLLDV ;FOUND DESIRED LOAD DEVICE ?
JRST SPGM20 ;NO, GO LOOK AT NEXT ENTRY
LOAD T1,PGCPU,(T4) ;GET CPU TYPE FROM THIS TABLE ENTRY
CAME T1,RQLCPU ;SAME AS TYPE OF SYSTEM BEING LOADED ?
JRST SPGM20 ;NO, GO CHECK NEXT ENTRY
LOAD T1,PGPGM,(T4) ;GET PROGRAM TYPE CODE
CAMN T1,RQLPGM ;FOUND DESIRED PROGRAM TYPE ?
JRST SPGM30 ;YES, GO GET THE FILESPEC
SPGM20: ADDI T4,PGLEN-1 ;SET UP TO POINT TO NEXT ENTRY
AOBJN T4,SPGM10 ;NO, LOOP OVER ALL ENTRIES IN THE TABLE
RET ;FAIL, NO SUCH PROGRAM TYPE KNOWN
SPGM30: LOAD T1,PGFIL,(T4) ;GET POINTER TO FILE-SPEC TO BE LOADED
RETSKP ;DONE, RETURN SUCCESS
;CVTDEV - ROUTINE TO CONVERT A DTE20 NUMBER INTO A STANDARD NICE
; LINE ID.
;
;ACCEPTS IN T1/ DTE20 NUMBER
; CALL CVTDEV
;RETURNS: +1 FAILED, INVALID DTE20 NUMBER
; +2 SUCCESS, WITH T2-T3/ STANDARD NICE LINE ID
CVTDEV::CAIL T1,MAXDTE ;VALID DTE20 NUMBER
RETBAD (.NRILN) ;NO, RETURN "INVALIID LINE ID"
MOVSI T2,.DTDTE ;GET DEVICE TYPE CODE
HRR T2,T1 ;YES, GET CONTROLLER (DTE20 #)
SETZM T3 ;NO UNIT OR CONTROLLER NUMBER
RETSKP ;DONE, RETURN SUCCESS
;GETNIB - ROUTINE TO RETURN THE ADDRESS OF THE NIB FOR A GIVEN NODE
;
;ACCEPTS IN T1/ POINTER TO ASCIZ NODE NAME
; CALL GETNIB
;RETURNS: +1 FAILURE, NO SUCH NODE IS KNOWN
; +2 SUCCESS, WITH T1/ ADDRESS OF NODE INFORMATION BLOCK
GETNIB::MOVE T2,T1 ;GET STRING TO SEARCH FOR (NODE NAME)
MOVEI T1,NODTAB ;GET ADDRESS OF KNOWN NODE TABLE
TBLUK ;SEARCH FOR THE SPECIFIED NODE
ERJMP R ;FAILED, RETURN ERROR
TXNN T2,TL%EXM ;EXACT MATCH ?
RET ;NO, RETURN FAILURE
HRRZ T1,(T1) ;GET ADDRESS OF NODE INFORMATION BLOCK
RETSKP ;RETURN SUCCESS
;ASGREC - ROUTINE TO ASSIGN A BLOCK TO HOLD A RECORD BEING SENT IN A
; SERIES OF MOP "LOAD RECORD" MESSAGES.
;
;ACCEPTS IN T1/ FLAGS:
; OF%RD IF INPUT IS TO BE DONE
; OF%WR IF OUTPUT IS TO BE DONE
; CALL ASGREC
;RETURNS: +1 FAILED, NO MORE BLOCKS AVAILABLE
; +2 SUCCESS, WITH T1/ ADDRESS OF BLOCK ASSIGNED
ASGREC: ASUBR <ARBFLG>
; MOVEI T1,RCTSIZ+MAXREC ;GET SIZE OF A RECORD BLOCK
MOVEI T1,500 ;Big record size.. so that INPLDA doesn't
;read into area not assigned
CALL GETFRE ;GET A FREE BLOCK FOR THE RECORD BLOCK
RETBAD () ;FAILED, RETURN ERROR TO CALLER
MOVE T3,ARBFLG ;GET FLAGS
MOVX T2,BPWRD ;GET NUMBER OF PDP-11 BYTES PER -20 WORD
TXNE T3,OF%WR ;OUTPUT TO BE DONE ?
MOVEI T2,0 ;YES, START WITH BYTE NUMBER 0
STOR T2,RBBYT,(T1) ;INITIALIZE THE NEXT BYTE TO READ
SETZRO RBJFN,(T1) ;INITIALIZE JFN FIELD FOR THIS ENTRY
MOVEI T4,.RBDAT(T1) ;GET OFFSET TO DATA AREA IN RECORD BLOCK
HRLI T4,(POINT 8,) ;FORM POINTER TO WHERE THE DATA GOES
STOR T4,RBPTR,(T1) ;STORE POINTER TO DESTINATION FOR DATA
RETSKP ;RETURN
;CHKDEV - ROUTINE TO VERIFY A DEVICE TYPE CODE
;
;ACCEPTS IN T1/ DEVICE TYPE CODE (.DTXXX)
; CALL CHKDEV
;RETURNS: +1 FAILED, DEVICE TYPE CODE IS INVALID
; +2 SUCCESS, DEVICE ISOK, T1/ POINTER TO ASCIZ DEV NAME
CHKDEV: HLRZ T4,LINNAM ;GET NUMBER OF ENTRIES IN DEVICE TABLE
MOVNS T4 ;GET -NUMBER OF ENTRIES
HRL T4,T4 ;GET -TABLE SIZE,,0
HRRI T4,LINNAM+1 ;FORM AOBJN POINTER TO SEARCH DEVICE TABLE
CHKDV1: HRRZ T2,(T4) ;GET A DEVICE TYPE FROM TABLE
CAMN T2,T1 ;FOUND DESIRED DEVICE TYPE CODE ?
JRST CHKDV2 ;YES, GO ADD NAME TO STRING
AOBJN T4,CHKDV1 ;LOOP OVER ALL TABLE ENTRIES
RET ;NOT FOUND, FAILED
CHKDV2: HLR T1,(T4) ;GET ADDRESS OF DEVICE NAME STRING
HRLI T1,(POINT 7,) ;FORM POINTER TO NAME
RETSKP ;DONE, SUCCESS
;FNDTGT - ROUTINE TO FIND A TARGET NODE'S NIB GIVEN A LINE ADJACENCY TABLE
; AND A SERVER LINE ID.
;
;ACCEPTS IN T1/ ADDRESS OF A LINE ADJACENCEY TABLE
; T2-T3/ STANDARD LINE ID
; CALL FNDTGT
;RETURNS: +1 FAILED, NICE RETURN CODE IN T1
; +2 SUCCESS, WITH T1/ ADDRESS OF NIB FOR NODE AT END OF THE
; GIVEN SERVER LINE.
FNDTGT: MOVSI T4,-MXLNOD ;SET UP TO LOOP OVER EACH ENTRY IN THE TABLE
FTGT10: JE LTUSE,(T1),FTGT20 ;IF THIS ENTRY NOT IN USE, GO ON TO NEXT ENTRY
CAMN T2,0(T1) ;TYPE AND CONTROLLER NUMBER COMPARE ?
CAME T3,1(T1) ; AND ALSO UNIT NUMBER AND STATION ADDRESS ?
SKIPA ;NO, GO CHECK NEXT ENTRY
JRST [ LOAD T1,LTNIB,(T1) ;YES, GET ADDRESS OF NIB FOR TARGET NODE
RETSKP ] ;DONE, RETURN SUCCESS
FTGT20: ADDI T1,LATSIZ ;FORM ADDRESS OF NEXT ENTRY IN TABLE
AOBJN T4,FTGT10 ;LOOP OVER ALL ENTRIES IN TABLE
RETBAD (.NRICF) ;ENTRY NOT FOUND, RETURN "DATABASE ERROR"
;ASCLIN - ROUTINE TO CONVERT A STANDARD NICE LINE ID TO A STRING
;
;ACCEPTS IN T1/ DESTINATION POINTER FOR STRING
; T2-T3/ NICE LINE ID
; CALL ASCLIN
;RETURNS: +1 FAILED
; +2 SUCCESS, WITH T1/ UPDATED DESTINATION POINTER
ASCLIN::ASUBR <ASLPTR,<ASLLIN,2>>
; ADD DEVICE TYPE NAME TO THE STRING
HLRZ T1,ASLLIN ;GET DEVICE TYPE CODE (.DTXXX)
CALL CHKDEV ;GO CHECK DEVICE TYPE
RET ;FAILED, BAD DEVICE
MOVE T2,T1 ;COPY POINTER TO DEVICE NAME STRING
MOVE T1,ASLPTR ;GET DESTINATION POINTER
SETZM T3 ;TERMINATE ON NULL
SOUT ;ADD DEVICE TYPE TO TABLE
; ADD CONTROLLER, UNIT, AND STATION TO DESTINATION STRING
MOVX T4,"_" ;GET UNDERSCORE
IDPB T4,T1 ;ADD UNDERSCORE TO DESTINATION STRING
HRRZ T2,ASLLIN ;GET CONTROLLER NUMBER
MOVX T3,10 ;USE OCTAL
NOUT ;ADD CONTROLLER TO STRING
ERJMP R ;FAILED, RETURN ERROR
IDPB T4,T1 ;ADD UNDERSCORE TO STRING
HLRZ T2,1+ASLLIN ;GET UNIT NUMBER
NOUT ;ADD UNIT TO STRING
ERJMP R ;FAILED, RETURN ERROR
HRRZ T2,1+ASLLIN ;GET STATION ADDRESS
SKIPN T2 ;If the station number is zero
JRST [ HLRZ T2,ASLLIN ; Get device type code (.DTXXX)
CAIE T2,.DTKDP ; Check for KDP
CAIN T2,.DTKDZ ; or KDZ
SKIPA ; Yes .. output a tab
RETSKP ; No .. just return
MOVEI T2,.CHTAB ; Get a tab
BOUT ; Put it instead of _n
RETSKP] ; And return
IDPB T4,T1 ;ADD UNDERSCORE TO STRING
NOUT ;ADD STATION TO STRING
ERJMP R ;FAILED, RETURN ERROR
RETSKP ;DONE, RETURN WITH UPDATED POINTER IN T1
SUBTTL Constants and Tables
; INTERVAL BETWEEN LINE COUNTER LOGGINGS IN SYSERR FILE
LOGTIM::EXP ^D60*^D60*^D1000
; TABLE OF DEVICE NAME/DEVICE TYPE CORRESPONDENCES
LINNAM: LINSIZ,,LINSIZ-1
TB (.DTA11,DA11A)
TB (.DTL1A,DL11A)
TB (.DTL1E,DL11E)
TB (.DTDLV,DLV11)
TB (.DTDMC,DMC11)
TB (.DTP11,DP11)
TB (.DTQ11,DQ11)
TB (.DTDTE,DTE20)
TB (.DTU11,DU11)
TB (.DTDUP,DUP11)
TB (.DTDV1,DV11)
TB (.DTKDP,KDP)
TB (.DTKDZ,KDZ)
LINSIZ=.-LINNAM
; TABLE OF NETCON DEVICE TYPE/SYSERR DEVICE TYPE CORRESPONDENCE
HDWTB: .SYDTE,,.DTDTE
.SYKDP,,.DTKDP
.SYDUP,,.DTDUP
.SYDMC,,.DTDMC
HDWSZ==.-HDWTB
; BYTE POINTER TABLES
PTRTAB: .PTSLD,,SLDTAB ;POINTERS FOR LOADING SECONDARY BOOTSTRAPS
.PTOPS,,OPSTAB ;POINTERS FOR LOADING OPERATING SYSTEMS
PTRSIZ==.-PTRTAB
OPSTAB: POINT 8,(T3),7
POINT 8,(T3),15
POINT 8,(T3),23
POINT 8,(T3),31
SLDTAB: POINT 8,(T3),15
POINT 8,(T3),7
POINT 8,(T3),31
POINT 8,(T3),23
SUBTTL Variable Data Storage
;NETCON FREE SPACE AND VARIABLES
; LOGGING PROCESS PAGES
LOGFFP==300 ;FIRST FREE PAGE FOR LOGGING PROCESS
NLOGPG==10 ;NUMBER OF PAGES FOR THE LOGGING PROCESS
;START OF SPACE THAT IS ZEROED AT PROGRAM START UP
BEGFRE::
OURNAM::BLOCK 2 ;NAME OF NODE NETCON IS RUNNING ON
OURNUM::BLOCK 1 ;OUR NODE NUMBER
EXCUTR::0 ;POINTER TO EXECUTOR NAME
ERRSTL==20 ;LENGTH OF ERROR STRING
ERRSTR::BLOCK ERRSTL ;USED BY ERROR TO HOLD ERROR STRING
LEV1PC::0 ;LEVEL 1 PC ADDRESS
LEV2PC::0
LEV3PC::0
L1SAV1::0 ;AC SAVE AREA
L1SAV2::0
L1SAV3::0
L1SAV4::0
L1SAVC::0
L2SAV1::0
L2SAV2::0
L2SAV3::0
L2SAV4::0
L2SAVC::0
L3SAV1::0
L3SAV2::0
L3SAV3::0
L3SAV4::0
L3SAVC::0
;NCU VARIABLE DEFINITIONS
SAVRET: BLOCK 1 ;RETURN ADDRESS OF CMDINI CALLER
SAVREP: BLOCK 1 ;SAVED STACK POINTER TO RESTORE ON REPARSE
RHDWC1: BLOCK 1 ;RETURN PC FOR INTERRUPT LEVEL 1
RHDWC2: BLOCK 1 ;RETURN PC FOR INTERRUPT LEVEL 2
RHDWC3: BLOCK 1 ;RETURN PC FOR INTERRUPT LEVEL 3
NXTNIB::BLOCK 1 ;NEXT FREE NODE INFORMATION BLOCK
NXTLIN::BLOCK 1 ;NEXT FREE LINE TABLE IN ADJTAB
TMPSTR: BLOCK 50 ;TEMPORARY STRING STORAGE LOCATION
NXTTIM: BLOCK 1 ;REMAINING CURRENT TIME INTERVAL
EVTSEQ::BLOCK 1 ;NEXT SEQUENCE NUMBER FOR EVENT LOGGING MESSAGES
;GLOBAL STORAGE DEFINITIONS
; PROGRAM TABLE USED TO DETERMINE WHAT BOOTSTRAP FILE TO LOAD
PGMTAB::BLOCK PGLEN*MAXPGM ;TABLE OF BOOT FILE-DEVICE/CPU CORRESPONDENCE
; LINE TABLES CONTAINING INFO FOR LINE SERVICE PART OF PROGRAM
LINTAB: BLOCK MAXNOD*MXLNOD ;NUMBER OF NODES * NUMBER OF LINES/NODE
; TABLE OF NODE NAMES FOR COMMAND PARSING (TBLUK JSYS FORMAT)
NODTAB::0 ,, MAXNOD ;CURRENT,,MAX NUMBER OF ENTRIES
BLOCK MAXNOD ;ALLOCATE SPACE FOR MAX NUMBER OF NODES
LOGFLG: BLOCK 1 ;NON-ZERO IF LOGGING PROBLEMS GET REPORTED
LSTFRE==:.-1 ;LAST LOCATION IN ZEROED FREE SPACE
ITPTR: BLOCK 1 ;INPUT TRACING POINTER
OTPTR: BLOCK 1 ;OUTPUT TRACING POINTER
LOGPDL: BLOCK PDLEN ;LOGGER PROCESS PDL
XLIST ;THE LITERALS ARE ASSEMBLED IN THIS
LIT
LIST ; "XLIST'ED" CODE.
END