Trailing-Edge
-
PDP-10 Archives
-
FORTRAN-10_V7wLink_Feb83
-
b10fdt.ctl
There are 7 other files named b10fdt.ctl in the archive. Click here to see a list.
; JOB TO BUILD FORDDT (THE FORTRAN DEBUGGER) FOR THE DECsystem-10
; SUBMIT B10FDT.CTL/TIME:00:05:00/RESTART:1
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1976, 1983
; VERSION 7 B10FDT.CTL April 1982
;This control file describes the procedures used to build the distributed
;software. It is unlikely that this control file can be submitted
;without modification on customer systems. Submit times may vary
;depending on system configuration and load. The availability of
;sufficient disk space and core is mandatory. This control file has not
;been extensively tested on alternate configurations. It has been used
;successfully for its intended purpose: to build the distributed
;software on our development systems.
;FUNCTION: THIS CONTROL FILE BUILDS THE STANDARD FORTRAN DEBUGGER,
; FORDDT. IT UTILIZES FIELD IMAGE SOFTWARE.
; INPUT: THE FOLLOWING FILES ARE REQUIRED BY THIS JOB IN THE
; DISK AREAS INDICATED:
; SYS: DIRECT .EXE
; SYS: MACRO .EXE USE MACRO 53A
; DSK: [AREA UNDER WHICH B10FDT.CTL IS BEING RUN]
; B10FDT .CTL THIS CONTROL FILE
; FORDDT .MAC INPUT FOR MACRO
; OUTPUT: THE FOLLOWING FILES ARE GENERATED BY THIS CONTROL FILE
; AND WILL BE AVAILABLE ON THIS DISK AREA AT JOB
; TERMINATION:
; DSK: [AREA UNDER WHICH B10FDT.CTL IS BEING RUN]
; B10FDT .LOG LOG FROM THIS JOB
; FDDT .MAC DEFINES ASSEMBLY SWITCH
; FORDDT .REL FORTRAN DEBUGGER FOR THE -10
START::
.CHKPNT START
; Generate FORDDT for the 10
.DEASSIGN
.MOUNT DSKT:
.R SETSRC
*C DSKT:
.ASSIGN DEC: SYS:
.ASSIGN DEC: UNV:
.SET WATCH VERSION
; Show checksums and versions for system software
.DIRECT/CHECKSUM -
*DIRECT .EXE SYS: ,-
*MACRO .EXE SYS:
; Show checksums of input files
.DIRECT/CHECKSUM -
*B10FDT .CTL ,-
*FORDDT .MAC
; Select features
.COPY FDDT.MAC=TTY:
* TOPS20==0 ;TOPS-10
*^Z
; Build FORDDT
.RUN SYS:MACRO
*FORDDT=FDDT.MAC,FORDDT.MAC
; Show checksums of all output files
.DIRECT/CHECKSUM -
*FDDT .MAC ,-
*FORDDT .REL
%FIN::
; [END OF B10FDT.CTL]