Enter your search terms Submit search form
	Web pdp-10.trailing-edge.com

NAME
	time_parse - parse free-format date/time string

SYNOPSIS
	#include <timex.h>

	int time_parse(char *str, struct tmx *tmx, char **endptr);

	struct tmx {
	    struct tm tm;	/* See ctime(3) for definition */
	    struct tmz tmz;	/* See time_lzone(3X) for definition */
	    char *tmx_err;	/* NULL or pointer to error message */
	    int tmx_flags;	/* Flags for possible future uses */
	};
	#define TMX_NULL (-1)	/* Unspecified items are given this value */


DESCRIPTION

 	time_parse() accepts a null-terminated date/time string,
"str", and parses it to fill out the specified TMX structure, "tmx".
If "endptr" is not null, it is always set to point to the remainder
(if any) of the string not consumed by time_parse().  The "time_make()"
function can be used to derive a UNIX time word of type "time_t" from the
resulting TMX structure.

	The integer return value is used to help indicate overall
success or failure.  A negative value means that the parse stopped due
to conflicting specifications or ambiguous keywords, which usually
means an error; otherwise, the value is the number of non-break tokens
successfully scanned, which may be 0.  Whenever the parse did not
reach the end of the string for whatever reason, the char pointer
"tmx_err" will be non-NULL and will point to a short constant message
string describing the reason.

INPUT

	"time_parse()" is intended to parse all reasonable date and/or
time formats, specifically including everything that the TOPS-20/TENEX
IDTNC JSYS will accept.  The function is actually much more flexible
than this since it will tolerate most cases of arbitrarily ordered,
delimited, and duplicated items; it makes use of contextual clues to
heuristically determine the meaning of numerical tokens.

	The string is parsed into tokens which are either numbers or
keywords, separated by punctuation break characters.  Keywords may be
in any case and need only have enough of the word to uniquely identify
it.  Whitespace serves to delimit tokens but is otherwise ignored.
The parse will stop when it encounters a keyword which cannot be
identified (unknown or ambiguous), or encounters a character that is
not one of the valid date/time punctuation chars: "()-,/:." plus space
and tab.  It will also stop if the only plausible interpretation of
a token leads to a clash with already parsed values.
	For maximum flexibility, the parsing is deliberately as
forgiving as possible, and will accept ANY construct as long as it can
make some sense out of it, regardless of how bizarre the string looks
to a human.  It is guaranteed to correctly parse all strings which are
"well formatted", but it cannot be used to enforce a specific syntax
and its interpretation of some inherently ambiguous strings may not be
what the user expects.

	The following are examples of acceptable formats (most taken
from the TOPS-20/TENEX documentation).  They are shown as dates and
times; a string may have only one of these, or it may have both in
either order, and sometimes their tokens can intermingle.
	Dates			Times
	6-Feb-76		12:34:56 or 1234:56 or 123456
	Feb-6-76		12:34 or 1234
	Feb 6 76		16:30 or 1630 or 4:30pm
	Feb 6, 1976		1:23 or 123 or 0123
	6 Feb 76		1:56AM
	6.2.1976		1:56-EST or 1:56 EST or 0156AM EST
	2/6/76			NOON
	1976-02-06		12:00AM	or 12 AM or 12-am or MIDNIGHT
	Wedn Febru 6 1976	5-STD or 0500-STANDARD
	1976 We Fe 6		12:30-DAYLIGHT

    Combined:
	Fri Nov 13 13:08:02 PDT 1981			(output of ctime())
	Monday, May 24, 1987 3:22:23am-PST (03:22:23)	(output of T20 daytime)
	Wed 2 Dec 87 09:18:44 PST			(RFC822 format)
	10-Nov-52 12:34-CDT
	2:25 AM, December 25, 2025
	Tues-PDT,(1988)8PM..AugUS 8 Tu			(free-format example)

	Note that any USA timezone abbreviation is allowed, plus GMT, UT,
	and whatever else has been added to the keyword table.

DIAGNOSTICS
	To summarize all possible return situations:

Value	tmx_err	**endptr		Meaning
< 0	set	start of bad token	Parse stopped due to clashing specs
					or ambiguous keyword.
>= 0	NULL	'\0'			String was completely parsed.
>= 0	set	start of invalid token	String was not completely parsed.
		(if isalpha(**endptr) is
		true, this is an unknown
		keyword)

Return-value:
	The exact quantity expressed by a positive return
value is not useful for most purposes; it represents the number of
valid numerical or alpha (keyword) tokens that the scan parsed.  This
often but not always corresponds to the number of entries in "tmx"
that were set.  A zero return value always indicates that the scan
halted before finding any such valid tokens, and nothing in the "tmx"
structure was set.
	
tmx_err:
	The "tmx_err" member of "tmx" will be NULL if the parse scanned
the entire string, otherwise it will be set.  Note that the setting of
this variable, as well as the sign of the return value, does not
necessarily reflect either success or failure; it is up to the
application program to interpret the results.

endptr:
	The "endptr" return value provides another way to see what
terminated the scan, since it points to the first character of
whatever token stopped it.  This will be '\0' at the end of the
string, and if **endptr is an alpha character then the token was an
unidentified or ambiguous keyword.

tmx:
	NOTE!!  Although a "tm" structure is included in the "tmx"
structure, the values it contains are not completely consistent with
the way "tm" structures are used by the C library functions.  There
are two differences:

	(1) If a structure member was not specified by the date/time string,
	it is given the value TMX_NULL, defined in <timex.h>, which matches
	no valid value for any member.  In particular the "tm.tm_yday"
	member will always be set to TMX_NULL since there is no standard
	convention for specifying it in a text string.

	(2) The "tm.tm_year" member is set to whatever year value the
	string specifies.  This may be 87, or 1987, or any other number.
	This conflicts with the C library interpretation where 0 is the
	year 1900.

	  In fact, time_parse() can be used to merely initialize a
"tmx" structure, by invoking it like this:
		time_parse((char *)0, &tmx, (char *)0);
	The time_make() function can be used to completely
canonicalize the structure so that the "tm" substructure is then
acceptable to the standard C library functions.

	It is important to remember that time_parse() does not, in
general, attempt to verify the correctness of the resulting "tmx"
structure.  Cross-checking is limited primarily to ensuring that duplicate
specifications are identical, e.g. if the weekday is seen twice, it
must have the same value or the parse fails.  time_make() will perform
the necessary content checking to derive a valid "time_t" time.

SEE ALSO
	time_make(3X), time_lzone(3X), ctime(3), time(2)

AUTHOR
	Ken Harrenstien, SRI International
	<KLH@SRI-NIC.ARPA> 415/859-6552

NAME
	time_make - derive a "time_t" time value from a parsed time

SYNOPSIS
	#include <timex.h>

	time_t time_make(struct tmx *tmx);


DESCRIPTION

	"time_make" can be considered the inverse of "localtime"; it
takes a broken-down time description and returns a UNIX-format time
value of type "time_t".  Note that it works only on "tmx" structures,
not "tm" structures.

	It is possible to have unspecified (TMX_NULL) values in the
structure, which time_make() will attempt to default reasonably:

		Member		Default value if unspecified
		tm.tm_year	Current year.
		tm.tm_mon	0 (Jan) if year specified, else current month.
		tm.tm_mday	1 if month specified, else current mday.
		tm.tm_hour	0
		tm.tm_min	0
		tm.tm_sec	0
		tmz.tm_secwest	tmz.tm_minwest * 60
		tmz.tm_minwest	local timezone
		tm.tm_isdst	0 if timezone not local.  If local,
					applies local DST algorithm.

	For example, "July 10" will default the year to its current
value (e.g. 1987), and the time to 00:00:00.  Just giving "1980" will
produce "Jan 1, 1980 00:00:00".
	The timezone, which is specified by tmz.tm_secwest, defaults
to tmz.tm_minwest*60 which in turn defaults to the local timezone.  A
value of 1 for either variable is interpreted as an explicit request to
use the local timezone.
	If tm.tm_isdst is set to 0, daylight savings time (DST) is never
applied.  If set to 1 (to represent USA DST) then DST is always applied
(by subtracting one hour).  If not specified, no DST is applied unless
the timezone is that of the local timezone, in which case DST is applied
if appropriate (determined by consulting localtime()).

	The "tm.tm_yday" (day of year) entry is not used to compute
the time unless neither the month nor day are specified.  The
"tm.tm_wday" (day of week) entry is never used.  However, specifying
either of these values will cause them to be checked, and time_make()
will fail if the values conflict with the other date specifications.
If the call succeeded, both of these components will be set.

DIAGNOSTICS
	-1 is returned on failure, which is usually due to a parameter
being out of range.  A failure return will always set "tmx_err" in the
tmx structure to point to a short constant error message.  This variable
is always NULL for a successful return.

SEE ALSO
	time_parse(3X), time_lzone(3X), ctime(3), time(2)

AUTHOR
	Ken Harrenstien, SRI International
	<KLH@SRI-NIC.ARPA> 415/859-6552

NAME
	time_lzone - get local timezone information
	time_tzset - set local timezone information from system

SYNOPSIS
	#include <timex.h>

	int time_lzone(struct tmz *tmz);

	struct tmz * time_tzset(void);

	struct tmz {
	    long tmz_secwest;	/* Secs west of GMT (-12/+12 hrs) */
	    int  tmz_minwest;	/* Same, in mins. (tmz_secwest/60) */
	    int  tmz_dsttype;	/* DST type if any (0 = none, 1 = USA) */
	    char *tmz_name;	/* Standard timezone name */
	    char *tmz_dname;	/* DST timezone name (if any) */
	};

DESCRIPTION

	"time_lzone()" fills out the structure pointed to.  It
does this by copying the contents of the static area indicated by
time_tzset(), which it calls only once.  A zero return value
indicates failure (no data and time_tzset() failed).

	"time_tzset()" attempts to get the local timezone information
from the system or environment (this is system dependent) and uses
this to set or re-initialize a static TMZ structure.  If
successful, a pointer to this structure is returned; if it could not
be initialized, NULL is returned.  It is not necessary to invoke this
function explicitly unless the program has some reason to believe that
the timezone may have changed during execution.

SEE ALSO
	time_make(3X), time_parse(3X), ctime(3), time(2)

BUGS
	Time zones are a big mess, especially on Unix where there are
	several incompatible (and unportable) methods of tracking them.
	These functions attempt to standardize the information more sensibly.

AUTHOR
	Ken Harrenstien, SRI International
	<KLH@SRI-NIC.ARPA> 415/859-6552