Trailing-Edge
-
PDP-10 Archives
-
SRI_NIC_PERM_FS_1_19910112
-
kcc-5/include/sys/ioctl.h
There are 5 other files named ioctl.h in the archive. Click here to see a list.
/*
* IOCTL definitions
*/
#ifndef _IOCTL_INCLUDED
#define _IOCTL_INCLUDED
#ifndef _SGTTY_INCLUDED
#include <sgtty.h> /* sgtty.h and sys/ioctl.h include each other */
#endif /* ifndef _SGTTY_INCLUDED */
struct tchars {
char t_intrc; /* interrupt */
char t_quitc; /* quit */
char t_startc; /* start output */
char t_stopc; /* stop output */
char t_eofc; /* end-of-file */
char t_brkc; /* input delimiter (like nl) */
};
struct ltchars {
char t_suspc; /* stop process signal */
char t_dsuspc; /* delayed stop process signal */
char t_rprntc; /* reprint line */
char t_flushc; /* flush output (toggles) */
char t_werasc; /* word erase */
char t_lnextc; /* literal next character */
};
struct winsize { /* Window size - BSD4.3 addition */
unsigned ws_row; /* Height in chars (# lines) */
unsigned ws_col; /* Width in chars (# columns) */
unsigned ws_xpixel; /* Width in pixels */
unsigned ws_ypixel; /* Height in pixels */
};
/*
* ioctl() function definitions
*/
/* Functions to support V6 gtty/stty calls */
#define TIOCGETP 0 /* Get parameters -- V6/V7 gtty() */
#define TIOCSETP 1 /* Set parameters -- V6/V7 stty() */
/* Functions to support V7 ioctl() */
#define TIOCSETN 2 /* V7: as above, but no flushtty */
#define TIOCEXCL 3 /* V7: set exclusive use of tty */
#define TIOCNXCL 4 /* V7: reset excl. use of tty */
#define TIOCHPCL 5 /* V7: hang up on last close */
#define TIOCFLUSH 6 /* V7: flush buffers */
/* All other functions are for BSD (4.3) */
#define TIOCSTI 7 /* simulate terminal input */
#define TIOCSBRK 8 /* set break bit */
#define TIOCCBRK 9 /* clear break bit */
#define TIOCSDTR 10 /* set data terminal ready */
#define TIOCCDTR 11 /* clear data terminal ready */
#define TIOCGPGRP 12 /* get pgrp of tty */
#define TIOCSPGRP 13 /* set pgrp of tty */
#define TIOCGETC 14 /* get special characters */
#define TIOCSETC 15 /* set special characters */
#define TIOCLBIS 16 /* set bits in local mode word */
#define TIOCLBIC 17 /* clear bits in local mode word */
#define TIOCLGET 18 /* get local mode mask */
#define TIOCLSET 19 /* set local mode mask */
#define TIOCSLTC 20 /* set local special chars */
#define TIOCGLTC 21 /* get local special chars */
#define FIONREAD 22 /* get # bytes to read */
#define TIOCGETD 23 /* Get line discipline */
#define TIOCSETD 24 /* Set line discipline */
#define TIOCGWINSZ 25 /* Get window size info */
#define TIOCSWINSZ 26 /* Set window size info (maybe gen SIGWINCH) */
/*
* sg_flags word flags
*/
#define ALLDELAY 0177400 /* Delay algorithm selection */
#define BSDELAY 0100000 /* Select backspace delays */
#define BS0 0
#define BS1 0100000
#define VTDELAY 0040000 /* for,-feed/v-tab delay */
#define FF0 0
#define FF1 0040000
#define CRDELAY 0030000 /* carriage-return delay */
#define CR0 0
#define CR1 0010000
#define CR2 0020000
#define CR3 0030000
#define TBDELAY 0006000 /* tab delays */
#define TAB0 0
#define TAB1 0001000
#define TAB2 0004000
#define XTABS 0006000
#define NLDELAY 0001400 /* new-line delays */
#define NL0 0
#define NL1 0000400
#define NL2 0001000
#define NL3 0001400
#define EVENP 0000200 /* even parity allowed on input */
#define ODDP 0000100 /* odd parity allowed on input */
#define RAW 0000040 /* wake on all chars, 8-bit input */
#define CRMOD 0000020 /* map CR->LF; echo LF or CR as CRLF */
#define ECHO 0000010 /* echo (full duplex) */
#define LCASE 0000004 /* map upper case to lower case */
#define CBREAK 0000002 /* return each char as soon as typed */
#define TANDEM 0000001 /* automatic flow control */
/* Bits for BSD local mode word */
#define LCRTBS 01 /* Backspace on erase rather than echoing erase */
#define LPRTERA 02 /* Printing terminal erase mode */
#define LCRTERA 04 /* Erase char echoes as BS-SP-BS */
#define LTILDE 010 /* Convert ~ to ` on output (for Hazeltines) */
#define LMDMBUF 020 /* Stop/start output when carrier drops */
#define LLITOUT 040 /* Suppress output translations */
#define LTOSTOP 0100 /* Send SIGTTOU for background output */
#define LFLUSHO 0200 /* Output is being flushed */
#define LNOHANG 0400 /* Don't send hangup when carrier drops */
#define LETXACK 01000 /* Diablo style buffer hacking (??) */
#define LCRTKIL 02000 /* Use BS-SP-BS to erase entire line on line kill */
#define LINTRUP 04000 /* Generate SIGTINT when input ready to read */
#define LCTLECH 010000 /* Echo input control chars as ^X (DEL as ^?) */
#define LPENDIN 020000 /* Retype pending input at next read or input char */
#define LDECCTQ 040000 /* Only ^Q restarts after ^S, like DEC systems */
/* Line discipline values */
#define OTTYDISC 0 /* Old V7-style discipline (must be zero) */
#define NTTYDISC 1 /* New BSD-style discipline */
#define NETLDISC 2 /* high-speed "net" discipline (not supported) */
#endif /* ifndef _IOCTL_INCLUDED */