Trailing-Edge - PDP-10 Archives - SRI_NIC_PERM_SRC_1_19910112 - 6-sources/version.req
There are 22 other files named version.req in the archive. Click here to see a list.
! .chapter version
!   Facility: DIX (used in DIL, DIT) 
!   Author: David Dyer-Bennet, 23-Aug-82
! .HL 1 Revision history
!   This is the only bliss module that uses a straight text revision history.
! This is because the macros for doing it more neatly are later in the file.
! .hl 1 Description
!   This require file (or library) defines the macros for easy edit
! history and version number definition in the style chosen for the
! facilities listed above.

! .hl 1 The edit history
! Edit (%O'22', '29-Oct-82', 'David Dyer-Bennet')
! %(  Add an optional trailing field to the EDIT macro to hold "reason".
!     Put in proper edit history!!!!!
!     Files: VERSION.REQ
! )%
! new_version (2, 0)
! Edit (%O'36', '11-Apr-84', 'Sandy Clemens')
! %( Put all Version 2 DIX development files under edit control.  Some of
!    the files listed below have major code edits, or are new modules.  Others
!    have relatively minor changes, such as cleaning up a comment.
! )%

! .hl 1 Edit history standards
!   The DIL consists primarily of calls on two other facilities, the DIX
! and the DIT.  Each of the three facilities will have its own revision
! history and version number.  This is desirable because the DIX and DIT
! will be used independently of the DIL (in particular, they will
! probably be the basis for the Data Interchange Utility).
!   Each source file including batch control files and command procedures
! will contain comments identifying which facility it belongs to, what
! edits have been installed in it, and its current edit level.  Putting
! the build procedures under edit control should reduce the number of
! times they are mysteriously broken.  Auxiliary source files, things
! like the DIL interface support files and the program to produce the
! DIX interface support files, will also be included under the facility
! edit history.
!   Edit history information should be stored in chronological
! order (oldest first).  The new_version macro should be used to show
! which edit levels correspond to which major and minor version numbers.
!   Source files for program modules need some additional edit
! information: they must produce a word containing their edit number in
! OWN storage, called MODVER or fac$g_module_version (only use the long
! name if long names are fully supported on the system in use).
!   Edit history information and version numbers should be extracted into
! the internals document from each file.
!   Each facility will have a master revision history module (called
! xxxhst.bli, where xxx is the facility code) which produces a global
! literal containing the full version number (in the DEC-20 version
! number format, since VAX doesn't have one).  This global literal will
! be called xxx$k_version, with a pseudonym of XXX%VE.
!   All possible subsets of modules that might be loaded must declare an
! OWN word that is initialized to this version information.  This word
! should be called xxxver or xxx$g_version, where xxx is the facility
! name.  The easiest way to achieve this is to put it into each module.
! Each module should put in own storage both its own latest revision and
! the overall version of the facility that it was part of.
!   The macro mark_versions (facility) defined below will make the
! two own variables described above for you.  To use pseudonyms, declare
! the long names to be macros expanding to the short names.
!   The test systems will have their own edit histories.  This will be
! maintained in a handy text file.  The test systems don't require the
! same level of care in this as the released software, because we do not
! have the requirement of being able to determine what version is being
! run from an EXE file some customer produced.
!   BLISS modules must declare their IDENT to be the revision level they
! represent.  
!   The text string **edit_version** (or **EDIT**) should be used to flag
! each location in each file where version information is likely to have
! to be changed (the IDENT attribute, the start of the revision history).
!   When making edits, be sure to update the idents on the files.  Be sure
! to put in comments showing what edit you're making (use the number).
! Be sure to list the modules changed in the edit history comment.  Be
! sure to use the edit number in giving ALU the reason for touching sources.

! .hl 1 Library files

LIBRARY 'FIELDS';                         ! \\

! .hl 1 Version number definitions
!   The concept of version numbers doesn't seem to exist on VMS and therefore
! is not defined in STARLET.  Therefore, there is no point in putting the TOPS
! side of the version definitions into STAR36.  Instead, the definitions for
! both systems appear in this module.

    ver$m_who_updated = make_mask (%BLISS36 (33, 3) %BLISS32 (27, 5)),
    ver$m_major_version = make_mask (%BLISS36 (24, 9) %BLISS32 (21, 6)),
    ver$m_minor_version = make_mask (%BLISS36 (18, 6) %BLISS32 (15, 6)),
    ver$m_edit = make_mask (%BLISS36 (0, 18) %BLISS32 (0, 15));

! .hl 1 Parameters and switches

    sequence_check_edits = 0;           ! \.p;\By default, no sequence checking.

!++ .hl 1 Updating version information
!   The following macro should be used, interspersed with the edit
! number information, to indicate the various points where major and
! minor version information changes.  This will keep as the final
! definitions the last definition encountered, and provide some error
! checking.

    new_version (major, minor) =        ! \.p;\used to indicate major/minor edit number information.
        %IF NOT (%DECLARED (major_version) AND %DECLARED (minor_version)) %THEN
            COMPILETIME major_version = 0, minor_version = 0;
        %IF major LSS major_version %THEN
            %ERROR ('Attempt to decrease major version number: ', %NUMBER (major_version))
        %IF major EQL major_version AND minor LEQ minor_version %THEN
            %ERROR ('Version number must increase: ', %NUMBER (major_version), ', ',
                %NUMBER (minor_version))
        %ASSIGN (major_version, major)
        %ASSIGN (minor_version, minor)

! .hl 2 The edit history

    edit                                ! \.hl 3 \MACRO
!   This macro declares an edit for this module.  A little checking
! is done for validity.  If the compile-time sequence_check_edits is
! true, a warning is issued if the edits aren't at intervals of one.
!   Formals:
        (                               ! ;.s 1.list 1
        new_edit,                       ! \.le;\: Decimal edit number
        edit_date,                      ! \.le;\: Date of edit, as a string (Ex: 4-Aug-82)
        edit_maker,                     ! \.le;\: [%O'22'] Name of person making edit (full name please)
        edit_reason                     ! \.le;\: [%O'22'] Reason for edit, like QAR, SPR, development, etc.
        ) =                             ! ;.end list
    %IF  (new_edit) LEQ EDIT_NUMBER %THEN
        %ERROR ('Edit number mistyped or entered out of sequence')
        %IF (((new_edit) - EDIT_NUMBER) NEQ 1) AND sequence_check_edits %THEN
            %WARN ('Edit number sequence broken after edit ', %NUMBER (EDIT_NUMBER))

    %ASSIGN (EDIT_NUMBER, (new_edit))

    %IF NOT %ISSTRING (edit_date) OR %CHARCOUNT (edit_date) LSS 8 %THEN
        %ERROR ('Edit date in incorrect format or mistyped: ', edit_date)

    %IF NOT %ISSTRING (edit_maker) OR %CHARCOUNT (edit_maker) LSS 5 %THEN
        %ERROR ('Edit maker in incorrect format or mistyped: ', edit_maker)

 % ;

    edit_number = 0;

!edit (0, '4-aug-82', 'David Dyer-Bennet')
!%(  This is an example of the correct format for edit history information.
!    Please use the DEC standard date format (dd-mon-yy).  Please use
!    full names for maintainer, not just initials.  Please give a full
!    explanation of the edit in your comment.  Please list all files
!    affected by your edit.)%

! .hl 2 Make Version number word
! .index version number
! .index version_number

    version_number (who  = 0, major, minor,  ! \.p;Keyword Macro \
        edit_no) =                  ! \\MACRO to make version number word 
        %IF major EQL 0 AND minor EQL 0 %THEN
            %PRINT ('Major and minor versions not set yet: ', %NUMBER (major),
                ', ', %NUMBER (minor))
        %EXPAND position_field (ver$m_who_updated, who) OR
        %EXPAND position_field (ver$m_major_version, major) OR
        %EXPAND position_field (ver$m_minor_version, minor) OR
        %EXPAND position_field (ver$m_edit, edit_no) % ;

! .hl 2 Macro to simplify information in programs

    mark_versions (facility) =          ! \\MACRO to define
            %NAME (facility, '$k_version');     ! ;<facility'>$k_version and
            %NAME (facility, '$module_version'): INITIAL        ! ;<facility'>$module_version
                    (major = major_version,
                    minor = minor_version,
                    edit_no = edit_number)
            %NAME (facility, '$g_version'): INITIAL
                    (facility, '$k_version')
         ; % ;