There are 3 other files named aplsf.hlp in the archive. Click here to see a list.
APLSF.HLP - Help File for APLSF-10 v2 September, 1979
A maximum of 4 characters are necessary for uniqueness.
< > = Required Specifier
[ ] = Optional Specifier
! = Choice Between Two Options
Provides a random pattern mask of length N.
)C [N] <FILENAME>
Terminates the current APL session, runs the filename specified
with a default device specification of SYS:, and facilitates a
return to APL.
)CALL [N] <FILENAME>
Terminates the current APL session, runs the filename specified,
and facilitates a return to APL.
Displays the record of activity (connect, CPU...).
Replaces active workspace with CLEAR WS.
Saves the active WS as CONTINUE and exits from APL.
)COPY <WSNAME> [PASSWORD] [NAMED-OBJECT-LIST]
Copies objects from WSNAME.
)CREATE [NUMBER-OF-COMPONENTS] <FILENAME> [PASSWORD] [RECORD-SIZE]
Creates a file for use with direct access I/O.
Displays or changes the number of significant digits.
)DROP <WSNAME> [SWITCH-LIST]
Deletes the workspace WSNAME from the user's disk area.
Allows or suppresses the printing of error lines.
Erases the named objects from the current workspace.
Displays an alphabetic list of function names in the WS.
)GROUP <GROUP-NAME> [GROUP-MEMBER-LIST]
Collects named objects in the group-member-list into the group
Lists the members of a particular group.
Displays an alphabetic list of group-names.
)INPUT [FILENAME] [/CHARACTER-SET]
Changes source of terminal input to be FILENAME.
)LIB [WSNAME] [SWITCH-LIST]
Displays names of workspaces.
)LOAD [MAGTAPE-POSITION] <WSNAME> [PASSWORD]
Retrieves a workspace from secondary storage.
Displays or changes the setting for the maximum WS size.
Displays or changes the setting for the minimum WS size.
Displays or changes the mode of output for teletype devices.
Returns the user directly to monitor mode.
Terminates the current APL session.
Displays or changes the index origin.
)OUTPUT [FILENAME] [/CHARACTER-SET]
Directs the destination of terminal output to FILENAME.
Displays the PPN of the user who created the active workspace.
Displays or alters the password of the WS.
)PCOPY <WSNAME> [PASSWORD] [NAMED-OBJECT-LIST]
Copies objects from WSNAME to the current workspace.
)R [N] <FILENAME>
Terminates the APL session and runs the filename specified, with
a default device of SYS:.
)RUN [N] <FILENAME>
Terminates the APL session and runs the filename specified.
)SAVE [MAGTAPE-POSITION] [WSNAME] [PASSWORD]
Saves a copy of the active WS on secondary storage.
Turns the workspace seal on or off.
Displays the WS state indicator of function execution progress.
Displays the WS state indicator with local variable names.
Displays the size of the currently active workspace.
Displays or sets to N the increment between tab settings for APL
Displays connect and CPU times accumulated.
Displays an alphabetic list of global variables.
Displays the APL version number with which the WS was last saved.
Displays or alters the terminal line width.
)WSID [WSNAME] [PASSWORD]
Displays or changes the name of the WS.
SYSTEM INFORMATION (I-BEAM)
VALUE ACTION OR RETURNED VALUE
17 Symbol table size, entries used.
18 Status of WS (0=OK).
19 Time in 60ths of a second during which the keyboard has been
20 Time of day in 60ths of a second.
21 CPU time since APL sign-on in 60ths of a second.
22 The maximum size your workspace may increase (in words).
23 User's job number in base 10.
24 Your APL sign-on time in 60ths of a second since midnight.
25 Today's date as mmddyy in base 10.
26 First line number in the state indicator.
27 Vector of line numbers of functions in the state indicator.
28 0 for the APL character set, 1 for the TTY character set.
29 Returns the user's project-programmer number in base 10.
30 Clears state indicator.
31 Number of APL statements executed since sign-on.
32 Number of APL operations executed since sign-on.
33 Number of kilo-core-seconds used since sign-on.
The following variables can be set by the user:
.BXAUS Automatic save indicator. If this variable is 1
the workspace is automatically backed up each time
a function definition is closed.
.BXCT Degree of tolerance or relative fuzz to be applied
in performing comparisons. Value must be in range
0 to approximately 1E-8.
.BXGAG Allow other users to communicate with your
terminal. Value of 1 means allow such action; 0
.BXIO Index origin for arrays. Possible values are 0 or
.BXLX Latent expression to be executed automatically
when the workspace is activated.
.BXPP Precision of non-integer numeric output. Value
must be integer in range 1 to 18.
.BXPW Maximum number of characters that may appear on an
output line. Value must be integer in range 30 to
.BXRL Current link in the chain of random numbers
generated by the roll and deal operators.
.BXSF Prompt or signal message for evaluated input.
.BXTIMELIMIT Amount of time APL waits for user input when doing
quote-quad and quad-del input.
.BXTRAP Expression to be executed automatically when an
The following variables retain system specified values:
.BXAI Account information on the current APL session.
.BXALPHA Vector containing the 27 characters: .LD and A-Z.
.BXALPHAU Vector containing the 27 characters: .Z@ and
.BXASCII Vector containing the 128 ASCII characters: octal
.BXAV Vector of all possible characters which can be
expressed in the APL system.
.BXCTRL Vector containing the 32 ASCII control characters:
.BXERROR Error message from last error.
.BXLC Vector of the line numbers in the APL workspace's
.BXNUM Vector containing the 10 digits: 0-9.
.BXTIMEOUT Flag indicating whether or not .BXTIMELIMIT
expired on last quad input. Also indicates
whether or not last input from a PTY was
terminated with a LF.
.BXTS Current date and time in base 10 format.
.BXTT Type of terminal being used in the current APL
.BXUL Job number associated with the current APL session
(in base 10).
.BXWA Returns the amount that the active workspace may
.BXBREAK A Causes execution to terminate, suspending the
current function and entering immediate mode.
.BXCR A Returns a canonical representation of the defined
function whose name is the character string A.
.BXDL S Delays execution for S seconds.
.BXEX A Erases an existing use of a name in the user's
.BXFI A Parses the character vector A as a numeric vector.
.BXFX M Reverses the operation performed by .BXCR.
.BXNC A Returns the classification of one or more names.
Values returned are 0-available for any use,
1-label name, 2-variable name, 3-function name,
4-not available for use as a name.
[A] .BXNL N[...]
Constructs a list of named objects in the user's
.BXQCO A Quietly Copies a workspace according to the
information in A.
.BXQLD A Quietly Loads a workspace according to the
information in A.
.BXQPC A Quietly Protected Copies a workspace according to
the information in A.
['TEXT'] .BXSIGNAL E
Signals the error E from the current function.
.BXVI A Validates the character vector A as a numeric
The following functions are related to the file system:
A .BXAPPEND C,H,T
Appends a data item to a /BU or /DA file.
.BXASS '[N] [FILENAME] [PASSWORD] [/FILE-TYPE] [/SHARE] [/DUMP]'
Assigns a file on the (optionally specified)
channel. Returns channel number used.
.BXCHS N Returns file status on channel N.
A .BXCIQ H,T Interprets part of a logical input record made up
of different data types.
.BXCLS N Closes files on one or more channels.
A .BXCOQ H,T Combines several different data types into a
single logical output record.
.BXDAS N Deassigns files on one or more channels.
.BXDEQ N [LOCK-NUMBER] [SHARE-BIT]
Synchronizes shared access to multiple-user files
by releasing the locked file.
.BXDVC N Returns device characteristics word and block size
for one or more channels.
.BXENQ N [LOCK-NUMBER] [SHARE-BIT]
Synchronizes shared access to multiple-user files
by locking the requested file.
.BXFCM N Returns component numbers and sizes for all
components in a direct access file.
.BXFLS N Returns sharing status, record size, and pointer
information for one or more files.
N .BXMTP OPS Performs a variety of magnetic tape operations.
N .BXRENAME C Renames the file associated with channel C using
the file specification N.
[End of APLSF.HLP]