Trailing-Edge
-
PDP-10 Archives
-
bb-bt99s-bb
-
10,7/galaxy/glxlib/glxmac.mac
There are 42 other files named glxmac.mac in the archive. Click here to see a list.
UNIVER GLXMAC -- Parameter File For GLXLIB
;
;
; COPYRIGHT (c) 1975,1976,1977,1978,1979,1980,1981,1982,
; 1983,1984,1985,1986,1987,1990
; DIGITAL EQUIPMENT CORPORATION
; ALL RIGHTS RESERVED.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
; AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS
; SOFTWARE OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
; OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE TO
; AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE
; WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
; BY DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
; OF ITS SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY
; DIGITAL.
SEARCH GALCNF ;SO WE CAN BE SYSTEM DEPENDENT
SALL ;SUPRESS MACRO EXPANSIONS
IFNDEF GLXPURE,<GLXPURE==-1> ;DEFAULT TO HIGH SEGMENT GLXLIB
DEFINE TOPS10 <IFN FTUUOS,> ;SETUP CONDITIONAL MACROS
DEFINE TOPS20 <IFN FTJSYS,>
TOPS10 <
IF2,<
IFE GLXPURE,<PRINTX [Building a Galaxy-10 library]>
IFN GLXPURE,<PRINTX [Building a Galaxy-10 OTS]>
>
SEARCH UUOSYM ;GET TOPS-10 SYMBOLS
>
TOPS20 <
IF2,<
IFE GLXPURE,<PRINTX [Building a Galaxy-20 library]>
IFN GLXPURE,<PRINTX [Building a Galaxy-20 OTS]>
>
SEARCH MONSYM ;GET TOPS-20 SYMBOLS
>
IFNDEF GLXVRS,<
IF1,<PRINTX ? Aborting... Must Compile "GLXVER+GLXMAC">
END>
CHKEDT (MAC) ;CHECK OUR EDIT NUMBER
MACEDT==0525 ;EDIT NUMBER
DEFINE VRSN.(PFX),<BYTE (3)PFX'WHO (9)PFX'VER (6)PFX'MIN (18)PFX'EDT>
;THIS FILE CONTAINS SYMBOL AND MACRO DEFINITIONS WHICH ARE COMMON TO
; ALL PROGRAMS DEVELOPED BY THE DECSYSTEM-10/20 SUBSYSTEMS
; GROUP. THESE PROGRAMS INCLUDE AT PRESENT:
;
; 1)ALL GALAXY COMPONENTS
; 2)TPS-20
;
;THIS FILE ALSO ACTS AS THE ADMINISTRATION MODULE FOR OTHER COMMON
; SUBSYSTEMS MODULES AS THEY ARE DEVELOPED.
XP FTUUOS,FTUUOS ;GLOBAL-IZE SYSTEM SWITCHES
XP FTJSYS,FTJSYS ;GOTTEN FROM GALCNF
XP FTFTS,FTFTS
XP SZ.INF,SZ.INF ;AND NAMED PID SIZE
SUBTTL Table of contents
; TABLE OF CONTENTS FOR GLXMAC
;
;
; SECTION PAGE
; 1. Table of contents......................................... 2
; 2. Revision history.......................................... 3
; 3. Accumulator Definitions................................... 4
; 4. JUMPx, SKIPx Instruction OPDEFS........................... 5
; 5. ND, XP, EXT, and GLOB Macros.............................. 6
; 6. CONT. LSTOF. LSTON. VRSN. Macro Definitions............... 7
; 7. PROLOG - Uniform assembly set up.......................... 8
; 8. SYSPRM - Set system dependent parameters.................. 9
; 9. MIN and MAX - Find minimum or maximum of vector of values. 9
; 10. LIBVEC - Library run-time system entry vector............. 10
; 11. PG2ADR,ADR2PG Macros...................................... 11
; 12. Standard Constants........................................ 12
; 13. Control Character Symbols................................. 13
; 14. PC WORD Flags............................................. 14
; 15. Field and Mask Macros..................................... 15
; 16. MOVX...................................................... 16
; 17. CAX - COMPARE MACROS...................................... 17
; 18. ADDX, SUBX, IMULX, MULX, IDIVX & DIVX MACROS.............. 18
; 19. TX -- TEST MASK........................................... 19
; 20. SUBFUNCTION MACROS........................................ 22
; 21. DEFSTR -- DEFINE DATA STRUCTURE........................... 23
; 22. STKVAR - STACK VARIABLE FACILITY.......................... 27
; 23. TRVAR - TRANSIENT VARIABLE FACILITY....................... 28
; 24. SAVE MACRO DEFINITION..................................... 30
; 25. LOAD,STORE,INCR,DECR,ZERO................................. 31
; 26. $BGINT,$DEBRK - Interrupt context switching............... 33
; 27. $BUILD,$SET,$EOB - Build pre-formed data blocks........... 34
; 28. $CALL,$RETT,$RETF,$RETE,$RET Uniform Call/Return Mechanisms 35
; 29. $DATA and $GDATA Macros - Runtime System Data Area control 36
; 30. $FATAL, and $WARN Macro definitions....................... 37
; 31. $STOP - Cause a STOP CODE to occur........................ 38
; 32. $TEXT - Interface to the T%TEXT routine................... 39
; 33. $TQ MACRO DEFINITION...................................... 45
; 34. Error processing and messages............................. 47
; 35. ..TEXT PARSING MACRO DEFINITION........................... 48
; 36. ASCII TEXT STRING STORAGE MACRO DEFINITIONS............... 50
; 37. $WTO / $WTOJ / $WTOR / $ACK Macros........................ 51
; 38. GALAXY system error codes................................. 52
; 39. Canonical File Information................................ 53
; 40. Canonical Job Information................................. 54
; 41. I%TIMR Functions and argument block...................... 55
; 42. Scanning and Command Module Symbols....................... 56
; 43. THE MESSAGE HEADER........................................ 59
; 44. ACK - THE GALAXY 'ACK' MESSAGE............................ 60
; 45. JIB - Job Information Block............................... 61
; 46. OBJ - Object Descriptor................................... 62
; 47. OBJCTS MACRO.............................................. 63
; 48. FD - File Descriptor...................................... 64
; 49. FOB - Parameter block passed to F%IOPN and F%OOPN......... 66
; 50. FRB - Parameter block passed to F%REN for renames......... 67
; 51. IB - Initialization Block for GALAXY programs............ 68
; 52. PIB - PID block........................................... 69
; 53. SAB - Send Argument Block passed to C%SEND................ 70
; 54. MDB - Message Descriptor Block returned by C%RECV......... 71
; 55. Special system PIDS....................................... 72
; 56. System Independent IPCF Codes and Constants............... 73
; 57. Program internal parameters of interest................... 74
; 58. $HALT -- Halt a Program without Reset................... 75
; 59. PDB - PARSER DESCRIPTOR BLOCK DEFINITION.................. 76
; 60. PDBDEF - PDBDEF MACRO DEFINITION.......................... 77
; 61. PDB -- PARSER DESCRIPTOR BLOCK.......................... 78
; 62. COMMAND FUNCTION MACROS................................... 79
; 63. INITIALIZE PARSER MACRO MACROS............................ 83
; 64. .$BUILD MACRO............................................. 84
; 65. PARSER MACROS FOR EACH FUNCTION........................... 85
; 66. KEYWORD TABLE MACROS...................................... 91
SUBTTL Revision history
COMMENT \
0045 G044 Add new Routines S%TBAD and S%TBDL as well as their
new error codes
0046 Add a new block to the MDB and the supporting code in GLXIPC.
This new block will contain a pointer to the senders account
string when C%RECV is called on the -20.
0047 G045 Add MSKSTR,DEFSTR MACRO Defininitions from MACSYM.
Replaced definitions of LOAD,STORE,INCR,DECR with
Modified definitions from MACSYM.
0050 Cleanup New Macros just added.
0051 Make INCR, DECR, and SAVE Skippable
0052 Define ADDX, SUBX, MULX, DIVX, IMULX and IDIVX
Remove .RET from entry vector and $RET definition
0053 Add .OTIBM object type definitions
0054 Make JXo and JXF skippable
0055 Add $FATAL and $WARN definitions
0056 Add CHK.PM and AVLPAG definitions for GLXMEM
0057 Fix SAVE macro to use library co-routines
0060 Define $CALL $RETT $RETF to use indirect access
to entry vector for non-library components
0061 Add .OTMNT object type definitions
0062 Add indexes to special PID table for Accounting, File DAEMON,
tape labeller.
0063 Change definitions of JUMPT,JUMPF,SKIPT,SKIPF to opdefs
0064 Change definition of Call to do range check and
conditionally do PUSHJ @ if in entry vector
0065 Change ERICA$ to ERARG$
0066 Add New $TEXT Qualifier ^R for Displaying a Job Info Block (JIB)
and add Definitions for the JIB
0067 Add I%HOST call to entry vector
And Define $HALT pseudo instruction for exit without reset.
0070 Make SPIDS MACRO to define special PIDS
0071 Add I%JINF Call to return Job Info on a particular Job
0072 Add S%SIXB Call to convert ASCII to SIXBIT
0073 Remove I%%WTO, Rename I%%WTI to I%%WTO (not released)
0074 Remove I%IWTO,I%WTO,I%SWTO,I%WTO. Rename I%%WTO
(previously I%%WTI) to I%WTO. Leave I%SOPR in.
0075 Reorganize the IB to break out PID information into its own
PID block. Allows for multiple PIDs per program.
Add C%CPID (Create a PID), C%KPID (Kill a PID), C%SPID
(Set default sender PID).
This edit and 0073, 0074 go together and break everyone
who previously $BUILT IBs.
0076 Add .OTBIN and .OTXFR for archiving, file transfer
0077 Remove JX? and PJ? and ASUBR Macro definitions
Move them temporarily to a file called GLXEXT
0100 Change $SET to use DEFSTR and MSKSTR structure definitions
0101 CHANGE JOB IN WTO MACROS TO BE JBN. THUS WE WON'T
CONFLICT WITH WT.JOB (WE'LL BE WT.JBN INSTEAD)
0102 Change op-code names for WTO blocks from WT.xxx to WO.xxx
0103 Change defstr and mskstr to allow them to accept arguments
as GETLIM and STOLIM do.
0104 Change FLD to look exactly like INSVL.
0105 Bump edit by 1 to take up slack in GLXWTO removal
0106 Remove extra CRLF from definition of $TEXT, ITEXT,
$WARN, $FATAL, $STOP
Added Module name printout to $WARN, $FATAL
Defaulted %%.MOD to NONAME before PROLOG macro
0107 Add C%MAXP to get maximum packet small packet size
0110 RESTORE IB.PRG IN THE IB TO CONTAIN THE PROGRAM NAME
0111 Extend DEFSTR and MSKSTR definitions to allow index
specification within LOCN field.
0112 Made C%PIDJ entry point to get Pid Job number
0113 Remove name from $FATAL and $WARN
0114 Define .BGINT in Prolog so Library can use $BGINT
0115 Change $FATAL to use stop code processor
Change $WARN to expand name (again)
Change Proglog to define %%.OTS for library component
tests.
Change Prolog to use GLOB instead of IF2 for vector
expansion.
Change $CALL and $BGINT to define themselves properly
Change $BGINT, $RETT, $RETF and $RETE to define properly
0116 Changed SAVE macro to $SAVE
0117 Change LOAD, STORE, INCR and DECR to skip structure
stuff if called without a possible structure
0120 Changed Prolog to define Library entry points
as Macros to allow the Call/return mechanisms
to become simple OPDEFS
Changed $CALL, $RETT, $RETF to simple OPDEFS
Changed PROLOG to equate entry vector symbols
for GLXINI
0121 Change SZ.OBF and SZ.BUF values for new GLXFIL
0123 Add Support to WTO macros for new Object Type Block
0124 Add new Object type for DBMS queues (.OTDBM)
0125 Install the TRMTYP macro 'for all' terminal types
0126 Change $ACK macro to always turn on WT.SJI
0127 Change DCT.MN from 2 to 1.
0130 -10, Change TRMTYP for VT05 erase EOL sequence to be
37,177,177,177. (It somehow was 377,177,.. no good!)
0131 Add L%APOS to the entry vector.
0132 Change the text description of .OTMNT to from 'Tape-disk
mount' TO 'Device'
0133 Move the PFH into the library on the -10
Redefine $DATA and $GDATA to use PSECTs
Remove pointers from entry vector to PAGTBL.
No longer needed since PFH is in library
Introduce the GLXPURE assembly switch
0134 Make .REQUEST REL:GLXINI so people can find it
0135 Remove edit 134. It seems to be a bad idea
0136 Add code for .MSFLG in the WTO macros
0137 Change PROLOG to define %%.GLX for the module instead of in
GLXINI
0140 Add .NULIO for -10 definitions
0141 Add -10 symbold for .CMTAD
0142 Add PARUNV macros to GLXMAC
0143 ADD FD TYPE CODES TO GLXMAC
0144 Add symbol definitions for IPCF sending by name
0145 Define entry to parse a number S%NUMI
0146 Define OPDEFS for $RETIF and $RETIT
0147 Define $ERRTXT macro for Parser
0150 Define entry for S%DATI and ERIDT$
0151 Add LA120 to TRMTYP macro for the -10
0152 Put in .XCREF and SUPPRESS for all MACRO created symbols
0153 MAKE ENTRY VECTOR SYMBOLS DEFINED IN GLXINI GLOBAL
0154 Change SZ.PAK (PACKET size) to PAGSIZ-1 (777 words)
0155 Modify $TEXT and ITEXT to decrease required compile
time
0156 Define errors from S%CMND as standard error codes
0157 Fix definition of ..ASGN in PROLOG macro to work
if GLXPURE is turned on
0160 Add defininition for JI.TLC routine to return physical
location
0161 Fix a bug generated by edit 157. Make GLXINI get global library
symbols by adding a : to the ..ASGN(A,ADDR),<A=ADDR> definition.
0162 Add new routines K%BUFF, K%FLSH, and K%OPEN.
0163 .REQUEST library instead of .REQUIRE for impure library
0164 Add FAL object type .OTFAL and rename .OTXFR to .OTFTS
0165 Add VT61 support for TOPS10
0166 ADD .CMFLT AND .CMTAD DEFINITIONS
0167 Add IB.DET to cause programs to detach if on FRCLIN.
0170 Delete IB.DET (GLXLIB defaults to detach)
0171 Don't declare global symbols for GLXINI during
prolog. This caused conflicts when loading with
the library. This removes edit 161.
0172 Define error code ERFIO$ for "file is offline".
0173 Remove edit 171 (Put the : back)
0174 Remove unwanted LALL [QAR 10-4899]
0175 .REQUEST REL:GLXINI
0176 Globalize FTFTS defined in GALCNF
0177 Make GLXLIB run execute-only.
1) Add "not-known-to-DDT" hardware mnemonics. GLXLIB needs
the PORTAL definition.
2) Remove indirection from entry vector references.
3) Change $BGINT so it does a $CALL instead of a JSR.
0200 Invent new IB bit 'IB.DPM' (Don't get Pid with an ipcf Message).
This instructs GLXIPC to use our job number as a PID.
0201 Restructure GLXLIB
1) Rework PROLOG macro completely.
2) .NODDT the following symbols:
$CALL $RET
$RETT $RETF
$RETIT $RETIF
JUMPT JUMPF
SKIPT SKIPF
3) Remove CORG, DORG and VORG symbols and make code smart snough
to figure the stuff out. This allows the PSECT origins set
by LINK switches really flexible.
4) Define $RETE so that a PUSHJ gets generated instead of a
JSP. This will allow extended addressing to work someday.
0202 Invent a new IB bit (IB.NPF) to instruct the library NOT to
set up the page fault handler. a PFH can be a real pain to
a program that switches high segments.
0203 Expand file and I/O error codes and messages for TOPS-10.
0204 Make STKVAR and TRVAR get called with a PUSHJ instead of a JSP
so it will work in non-zero sections.
0205 Delete second definition of FLD macro. It was incorrect anyway.
0206 Fix bug in $TEXT macros that would not allow a decimal number
to be used as a field width (missing ^D).
0207 Add .POPJ1 to entry vector.
0210 Add two new flags to date time routines for TOPS10
CM%FUT for future time, and CM%PST for past time
Also add $FTAD macro to set for future time for TOPS10
0211 Comment out the MONSYM version reference until MONSYM has
one to reference.
0212 Add a couple more LOOKUP/ENTER/RENAME error messages.
0213 Add FB.PHY to allow physical-only OPENs.
Add 5 additional error codes from GLXSCN to the ERRORS macro.
0214 Add FRB.FL flag word to F%REN arg block
0215 Add a field in the FOBs for protection codes and physical-only
on RENAMEs.
0216 Make $SAVE work on indexed variables
0217 Add symbols to support new file atttribute block. Remove symbols
for protection codes added in edit 215.
220 Add CEI error for interrupt system failure
221 Add entry point I%RLIM to reset VRT and PHY core limits.
change value of PFHORG to be 776000 (for the system PFH).
222 Add new error codes ERENF$ (Linked list entry not found) and
ERNSL$ (No such linked list).
223 Remove references to PFHORG. Add new error codes:
GLXIPC ERNPI$ No pages for IPCF reception
GLXMEM ERNFP$ No free pages
224 Remove reference to old PFH symbols and fix problem of
M%CLNC not getting called enough to reduce core.
225 Make two bits (CM%FUT, CM%PST) apply to the -20 as well as
the -10.
226 Define .CHLAB ("<") and .CHRAB (">") since everyone uses them.
Lots of symbols are golbal that shouldn't be. Localize them.
227 Remove I%RLIM since PFH won't need it.
230 Add CPU type codes.
231 Add TOPS-10 PC flag definitions.
232 Enlarge interrupt level stack
233 1371 Add CM%NSF for GLXSCN.
234 1427 Fix defs of SZ.BUF and SZ.OBF
235 Add terminal support for VT101, VT102, VT103, VT125,
VT180, and VT185 in the TRMTYP macro. 2-Jun-83/CTK
236 Expanded the TRMTYP macro to include the address of a
terminal initialization routine, and the escape sequences
to set and clear keypad application modes. 24-Oct-83/NT
237 Added ERR error code IFB for indirect command files that
are too big to fit in buffer. 28-Dec-83 /LWS
240 Make $DEFAULT macro PRINTX error message if no arg given.
Hopefully this will prevent unwanted BDS stopcodes.
4-Jan-84 /LWS
241 Add NDN (Null device name given) to support fix in
GLXSCN that catches ":" device name bug. /LWS
242 10015 Add new SAB flag word and MDB priv bits.
26-Mar-84 /DPM
450 10049 Begin version 2. Bump all version and edit numbers
5-Jul-84 /NT
451 10050 Redefine .RETx routines to not go through entry vectors
5-Jul-84 /NT
452 10052 Support for GLXKBD rewrite, mostly with escape tables
interpretation for OPR SET KEYPAD command.
5-Jul-84 /NT
453 10053 Add VT2xx support.
9-Jul-84 /NT
454 10047 Add support for EVENT queue
13-Jul-84 /DPM
455 10058 Add new special PID index for [SYSTEM]CATALOG
24-Jul-84 /DPM
456 10066 Add new GLXSCN flag "CM%WLD" to indicate wildcarding
of PPNs, directories, and filespec parts is desired.
4-Aug-84 /DPM
457 10073 Add $SUBCM macro to allow parsing of TOPS-20 style
sub-commands from within application tables
13-Aug-84 /DPM
460 10079 Add new system PIDs and [SYSTEM]INFO code.
14-Aug-84 /RCB
461 10075 Add new GLXKBD routine K%ECHO to library vector.
15-Aug-84 /WXD
462 11011 Add fallback code for running under 7.02.
28-Aug-84 /RCB
463 10105 Add CDO entries for S%U2DT and S%DT2U.
12-Oct-84 /LWS
464 10121 Change FAL object name from "File Access Listener"
to "Fal-Stream"
14-Nov-84 /LWS
465 10122 Add error codes for network file spec parsing.
15-Nov-84 /DPR
466 10144 Add new file attribute bits for the RDH fields.
5-Feb-85 /DPM
467 10165 Add $AHELP to provide additional help without suppressing
default.
13-Mar85 /TL
470 10167 Add VK100 to the table of known terminal types.
19-Mar-85 /DPM
471 10168 Add object types .OTXER and .OTFCH for Xerox and microfich.
19-Mar-85 /DPM
472 10174 Add FUNCT. module GLXFUN
23-Mar-85 /TL
473 10201 Add RDH fields as things which may be returned by
F%INFO.
26-Apr-85 /NT
474 10228 Include DQS support. Remove duplicate object type
definitions.
6-Jun-85 /JAD
475 10265 Add new parse flag CM%WLA to indicate accounting-style
wildcarding to be used when parsing PPNs.
30-Jul-85 /DPM
476 10268 Clean up symbol tables and CREF listings by purging and
XCREFing generated symbols and internal subroutine macros
used by the parsing macros.
31-Jul-85 /DPM
477 10291 Enter .RETE with a CDO macro rather than an NT.
18-Sep-85 /NT
500 10294 Add system PID index for system MAILER.
24-Sep-85 /ERS
501 10330 Finish edit 236, document TRMTYP macro, put the VK100 in
alphabetical order, define the correct clear to end of line
sequences for non-ANSI video terminals. 20-Nov-85 /NT
502 10335 Add new error code ERNHA$ (no help available).
4-Dec-85 /DPM
503 10402 Invent new system PID for NEBULA.
6-May-86 /JAD
504 10405 Add support for TB%ABR in S%TBAD and S%TBDL
10-May-86 /TL
505 10406 Add new object type for network queue controller.
12-May-86 /DPM
510 10462 Add STOPCD macro and replace $STOP with STOPCD.
14-Nov-86 /BAH
511 10498 Add .VERSION to PROLOG.
12-Mar-87 /TL
512 10515 Add 2 new error codes, ERTOF$ and ERTOP$, ("timeout waiting
for FRCLIN" and "timeout waiting for PID" resp.) for
I%CJOB. Add definition of new CJB ("create job block")
which is the arg used when calling I%CJOB.
25-Jun-87 /LWS
513 10545 Add $ERDNP (Dependencies not present) error code used
by I%CJOB.
514 10557 Remove reference to FTFLBK.
22-Aug-87 /LWS
515 10620 Add VT330 and VT340.
19-Apr-88 /KDO
517 Add the IB.SAV flag (for doing a SAVE. on a stopcode) to the
IB block.
23-May-88 /PERK
520 Fix the error recovery for the SAVE function added in edit 517.
1-Jun-88 /PERK
521 10656 Add VT320 terminal type.
28-Sep-88 /LWS
522 10660 Set SZ.IFN to 42 channels. This is an artificial limit
based on the number of streams BATCON can handle and the
default number of extended channels the monitor will
support. (BATCON uses a total of 3 channels per stream.)
See BATCON edit 5030.
14-Oct-88 /DPM
523 10670 Clean up symbol definitions which used PHASE/DEPHASE pairs.
Not only were some of them lacking the DEPHASE, but it makes
it hard for people to build a useful DDT with galactic symbols.
Fix to use .ORG pseudo-op pairs instead.
23-Jun-89 /RCB
524 10674 Add missing file attributes, and the ability to set them from
the IFN of another file.
07-Aug-89 /RCB
525 10678 Remove reference to ".MCRV."; an unimplemented MACRO pseudo-op.
16-ct-89 /DPM
\ ;End of Revision History
SUBTTL Copyright macro
DEFINE .BCOPY,<
XLIST
.ORG 0
LIST
>
DEFINE COPYRIGHT,<ASCIZ \
COPYRIGHT >
DEFINE .ECOPY,<
XLIST
.....X=.
.ORG
.ORG 0
REPEAT .....X,<EXP 0>
PURGE .....X
.ORG
LIST
>
SUBTTL Accumulator Definitions
;Pass FACT file accounting requirement along
FTFACT==FTFACT ;From GALCNF
;THE FOLLOWING ACCUMULATOR DEFINITIONS ARE STANDARD THROUGHOUT THE
; SUB-SYSTEMS GROUP AND MAY NOT BE CHANGED. THE ACCUMULATORS DEFINED ARE:
TF==0 ;TRUE/FALSE REGISTER, NEVER REFERENCED DIRECTLY
; USED BY $RETx AND JUMPT,JUMPF, SKIPT,SKIPF
.SAC==0 ;SCRATCH AC USED BY SOME NONE SKIPPABLE
;MACROS AND SOME MACRO CALLS TO GLXCOM
;.SAC MAY NOT BE CHANGED ON EXIT FROM A
;CO-ROUTINE SO THAT ANY ROUTINE MAY PASS
;A TRUE FALSE VALUE BACK TO IT'S CALLER.
S1==1 ;S1 & S2 ARE ARGUMENTS TO ROUTINES
S2==2 ;AND ARE OTHERWISE SCRATCH
T1==3 ;T1 - T4 ARE TEMPORARY REGS
T2==4
T3==5
T4==6
P1==7 ;P1 - P4 ARE PRESERVED REGS
P2==10
P3==11
P4==12
.A13==13 ;.A13 THRU .A16 NOT USED BY LIBRARY
.A14==14
.A15==15
.A16==16
.FP==16 ;FRAME POINTER USED BY TRVAR AND ASUBR
;MAY NOT BE CHANGED WITHIN THE SCOPE OF
;A ROUTINE USING TRVAR OR ASUBR
;HOWEVER -- IT IS PRESERVED OUTSIDE THE
;SCOPE OF THESE ROUTINES
P==17 ;PUSHDOWN POINTER
;THERE ARE CO-ROUTINES DEFINED IN GLXCOM TO SAVE AND AUTOMATICALLY
; RESTORE THE "T" AND "P" THAT ARE INVOKED BY THE SAVE MACRO
; CALLED AS FOLLOWS:
; $SAVE <P1,P2,P3,P4> ;TO SAVE P1-P4
; $SAVE <T1,T2,T3,T4> ;TO SAVE T1-T4
; $SAVE <P1> ;TO SAVE P1
; $SAVE <P1,P2,P3> ;TO SAVE P1-P3
; $SAVE <T1,T2> ;TO SAVE T1-T2
; $SAVE <TF,S1> ;TO SAVE TF AND S1 FOR RETURN TO CALLER
; ;AC'S ARE AUTOMATICALLY RESTORED ON RETURN
;AC'S 13,14,15 & 16 ARE AVAILABLE TO THE COMPONENT AND MAY BE USED
; TO ANY END WITH THE NOTEABLE EXCEPTION:
; * * * * N O T E * * * *
; AC16 IS USED AS A FRAME POINTER FOR TRVAR AND ASUBR DYNAMIC
; VARIABLE ALLOCATION. IT MAY NOT BE REFERENCED WITHIN THE
; RANGE OF THE TRVAR OR ASUBR, HOWEVER IT IS PRESERVED ON RETURN
; TO THE CALLER.
;REFER TO GLXLIB.MEM FOR A FULL DESCRIPTION OF MACROS AND AC USAGE
SUBTTL Not-known-to-DDT hardware mnemonics
; These OPDEFs were taken from MACTEN
;
; JRST xx,
;
OPDEF PORTAL [JRST 01,] ;CONCEALED ENTRY POINT JUMP
OPDEF JRSTF [JRST 02,] ;JUMP RESTORING FLAGS
OPDEF HALT [JRST 04,] ;JUMP, HALTING PROCESSOR
OPDEF XJRSTF [JRST 05,] ;FLAG-PC-DOUBLEWORD JRSTF
OPDEF XJEN [JRST 06,] ;FLAG-PC-DOUBLEWORD JEN
OPDEF XPCW [JRST 07,] ;FLAG-PC-DOUBLEWORD XSFM+XJRSTF
OPDEF JEN [JRST 12,] ;JRSTF ENABLING PI
OPDEF XSFM [JRST 14,] ;SAVE FLAG-PC-DOUBLEWORD NO JUMP
; JFCL xx,
;
OPDEF JFOV [JFCL 01,] ;JUMP ON FLOATING UNDER/OVERFLOW
OPDEF JCRY1 [JFCL 02,] ;JUMP ON CARRY-1
OPDEF JCRY0 [JFCL 04,] ;JUMP ON CARRY-0
OPDEF JCRY [JFCL 06,] ;JUMP ON CARRY-0 OR CARRY-1
OPDEF JOV [JFCL 10,] ;JUMP ON OVERFLOW
; JRST to a POPJ
;
OPDEF PJRST [JUMPA 17,] ;PUSHJ/POPJ
;THIS CUTE TRICK WILL ALLOW DDT
;TO DISTINGUISH BETWEEN JRST AND
;PJRST INSTRUCTIONS . . .
DEFINE $FALL(ADDR)<IF2,<IFN <ADDR>-.,<PRINTX ? ILLEGAL $FALL ADDR>>>
;TO SAVE ON PJRSTS ACROSS PAGE BREAKS
; Other random OPDEFs
;
OPDEF XMOVEI [SETMI] ;EXTENDED MOVEI
OPDEF XHLLI [HLLI] ;NOT YET IN MACRO
OPDEF IFIW [1B0] ;EXTENDED ADDRESSING HACK
.NODDT IFIW ;DON'T CLOBBER SETZ
SUBTTL JUMPx, SKIPx Instruction OPDEFS
;All subroutines which follow GALAXY conventions return a "success/failure"
; value in the register TF. This is done by returning via one of
; the return instructions, $RETE, $RETT or $RETF (See next page).
;The value of TRUE or FALSE which a routine returns can be tested with one
;of the following instructions, which alter program flow according to
; the value currently in TF.
; Jump to location specified if TF contains TRUE
OPDEF JUMPT [JUMPN]
; Jump to location specified if TF contains FALSE
OPDEF JUMPF [JUMPE]
; Skip the next instruction if TF contains TRUE
OPDEF SKIPT [SKIPN]
; Skip the next instruction if TF contains FALSE
OPDEF SKIPF [SKIPE]
; Suppress DDT typeout of the above symbols
;
.NODDT JUMPT, JUMPF, SKIPT, SKIPF
SUBTTL ND, XP, EXT, and GLOB Macros
;Macro to Define Symbol if not already defined
; ND SYMBOL,VALUE
DEFINE ND(SYM,VAL),<IF2,<IFDEF SYM,<SYM==SYM>> IFNDEF SYM,<SYM==VAL>>
;Macro to Define a Symbol and force it INTERN
; XP SYMBOL,VAL,PRINT
; Where PRINT is any Non-blank to allow printing from DDT
DEFINE XP(SYM,VAL,PRINT),<IFB <PRINT>,<SYM==:VAL> IFNB <PRINT>,<SYM=:VAL>>
;Macro to EXTERN a Symbol if not defined in this routine
; EXT SYMBOL
DEFINE EXT(SYMBOL),<IRP SYMBOL,<
IF2,<IFNDEF SYMBOL,<EXTERN SYMBOL>>>>
;Macro to EXTERN or INTERN a Symbol
; GLOB SYMBOL
DEFINE GLOB(SYMBOL),<IRP SYMBOL,<
IF2,<IFDEF SYMBOL,<.IFN SYMBOL,EXTERN,<INTERN SYMBOL>>
IFNDEF SYMBOL,<EXTERN SYMBOL>
SUPPRES SYMBOL>>>
SUBTTL CONT. LSTOF. LSTON. VRSN. Macro Definitions
;Macro to force page overflow with appropriate comments
DEFINE CONT.(NAME)<LALL
PAGE; (NAME Continued on next page)
SALL; (NAME Continued from previous page)>
;Macros to turn on and off listings with nesting and level control
; LSTOF. ;TURNS OFF LISTINGS ONLY
; LSTOF. XCREF ;TURNS OFF LISTINGS AND CREF
; LSTON. ;RESTORES LISTINGS AND CREF AT TOP LEVEL
;IF LSTIN. IS DEFINED AS .MINFI THEN ALL LISTINGS ARE ON
DEFINE LSTOF.(FOO),<
IFNDEF LSTIN.,LSTIN.==0 ;;INITIALIZE LEVEL COUNTER
IFE LSTIN.,<
IFIDN <XCREF><FOO>,<.XCREF> ;;CONDITIONALLY SUPPRESS CREF
XLIST> ;;TURN OFF LISTINGS
LSTIN.==LSTIN.+1> ;;BUMP LIST LEVEL
DEFINE LSTON.,<
IFG LSTIN.,LSTIN.==LSTIN.-1 ;;DECR LIST LEVEL
IFLE LSTIN.,<.CREF ;;RESUME CREFS
LIST>> ;;RESUME LISTS
;Macro to Generate Standard Version Word
;Assumes PFXWHO, PFXVER, PFXMIN, PFXEDT are defined.
; VRSN. (PFX)
DEFINE VRSN.(PFX),<BYTE (3)PFX'WHO (9)PFX'VER (6)PFX'MIN (18)PFX'EDT>
SUBTTL PROLOG - Uniform assembly set up
; The PROLOG macro is used to uniformly search all the right UNV files
; and setup the listing format and STOP CODE controls.
; Call: PROLOG (MODULE,OTSCOD)
;
; Where: 'MODULE' represents the module name
; 'OTSCOD' (optional) represents a GLXLIB module mnemonic
;
%%.MOD==SIXBIT/NONAME/ ;;DEFAULT MODULE NAME INCASE NULL
%%.OTS==0 ;;DEFAULT OTSCOD INCASE NULL
DEFINE PROLOG (MODULE,OTSCOD),<
SALL ;;FOR PRETTY LISTINGS
LSTOF. XCREF ;;TURN OFF LISTING
%%.GLX==%%.GLX ;;RECORD VERSION NUMBER
GLXVRS==GLXVRS ;;...
IFNB <MODULE>,<%%.MOD==SIXBIT/MODULE/> ;;MAKE NAME AVAILABLE
IFNB <OTSCOD>,<%%.OTS==SIXBIT/OTSCOD/> ;;MAKE OTSCODE AVAILABLE
GLOB I%INIT ;;ENTRY POINT CALLED BY THE USER
TOPS10 < ;;TOPS-10 ONLY
SEARCH UUOSYM ;;OPERATING SYSTEM SYMBOLS
%%UUOS==%%UUOS ;;RECORD VERSION NUMBER
> ;;END OF TOPS-10 CONDITIONAL
TOPS20 < ;;TOPS-20 ONLY
SEARCH MONSYM ;;OPERATING SYSTEM SYMBOLS
; %%MONS==%%MONS ;;RECORD VERSION NUMBER
> ;;END OF TOPS-20 CONDITIONAL
IFB <OTSCOD>,< ;;IF NOT A GLXLIB MODULE
IFN GLXPUR,<
.TEXT |,REL:GLXLIB/SEARCH/REQUIRE:I%INIT/SEGMENT:LOW|
> ;;END IFN GLXPUR
DEFINE $DATA (NAM,SIZ<1>),< ;;MACRO TO GENERATE DATA STORAGE
NAM: BLOCK SIZ
> ;;END OF $DATA MACRO
DEFINE CDO (X),<GLOB X> ;;MAKE ENTRY POINTS GLOBAL
DEFINE NT(X),<CDO X> ;;LIKEWISE
LIBVEC ;;GLOBALIZE ALL ENTRY POINTS
> ;;END OF IFB <OTSCOD> CONDITIONAL
IFNB <OTSCOD>,< ;;IF A GLXLIB MODULE
CHKEDT (OTSCOD) ;;CHECK GLXLIB MODULE EDIT NUMBERS
IFDIF <OTSCOD><INI>,< ;;IF NOT GLXINI
IFN GLXPURE,<.PSECT .HIGH.> ;;IF OTS
IFE GLXPURE,< ;;IF LINKABLE LIBRARY
TWOSEG 400000 ;;MAKE US SHARABLE
RELOC 0 ;;DATA STORAGE STARTS HERE
RELOC 400000 ;;START LOADING THE HIGH SEGMENT
> ;;END OF IFE GLXPURE CONDITIONAL
DEFINE $DATA(NAM,SIZ<1>),< ;;MACRO TO GENERATE DATA STORAGE
IFN GLXPURE,<.PSECT DATA> ;;RELOCATE TO DATA PSECT
IFE GLXPURE,<RELOC> ;;RELOCATE TO LOW SEGMENT
IFNDEF OTSCOD'%D,<OTSCOD'%D::! OTSCOD'%DL==:0>
NAM: BLOCK SIZ
OTSCOD'%DL==:OTSCOD'%DL+SIZ ;;COUNT WORDS
IFN GLXPURE,<.ENDPS DATA> ;;TERMINATE PSECT REFERENCE
IFE GLXPURE,<RELOC> ;;BACK TO THE HIGH SEG
> ;;END OF $DATA MACRO
IFDIF <OTSCOD><OTS>,< ;;FOR ALL BUT GLXOTS...
DEFINE CDO (X),<GLOB X> ;;MAKE ENTRY POINTS GLOBAL
DEFINE NT(X),<CDO X> ;;LIKEWISE FOR NT
LIBVEC ;;GLOBALIZE ALL ENTRY POINTS
> ;;END OF IFDIF <OTSCOD><OTS> CONDITIONAL
> ;;END OF IFDIF <OTSCOD><INI> CONDITIONAL
;;STILL IN IFNB OTSCOD
IFIDN <OTSCOD><INI>,< ;;IF GLXINI
DEFINE $DATA (NAM,SIZ<1>),< ;;MACRO TO GENERATE DATA STORAGE
NAM: BLOCK SIZ
> ;;END OF $DATA MACRO
> ;;END OF IFIDN <OTSCOD><INI> CONDITIONAL
>;;END OF IFNB <OTSCOD>
LSTON. ;;TURN LISTINGS ON
GLOB <.POPJ, .RETT, .RETF> ;;SOME POPULAR RETURNS
OPDEF $RET [POPJ P,] ;;RETURN
OPDEF $RETT [PJRST .RETT] ;;RETURN TRUE
OPDEF $RETF [PJRST .RETF] ;;RETURN FALSE
OPDEF $RETIT [JUMPT .POPJ] ;;RETURN IF TRUE
OPDEF $RETIF [JUMPF .POPJ] ;;RETURN IF FALSE
.NODDT $RET,$RETT,$RETF,$RETIT,$RETIF
> ;;END OF PROLOG MACRO
SUBTTL SYSPRM - Set system dependent parameters
;THE SYSPRM MACRO IS USED TO DEFINE A SYMBOL WHOSE VALUE IS DIFFERENT
; DEPENDING ON THE OPERATING SYSTEM WHICH THE PROGRAM IS
; BEING ASSEMBLED FOR.
;
; THE CALL IS:
;
; SYSPRM 'SUBSYSTEM-NAME' , 'TOPS10 VALUE' , 'TOPS20 VALUE'
DEFINE SYSPRM(SYMBOL,UUOS,JSYS),<
IFNB <UUOS>,<TOPS10<SYMBOL==UUOS>>
IFNB <JSYS>,<TOPS20<SYMBOL==JSYS>>
> ;END DEFINE SYSPRM
SUBTTL MIN and MAX - Find minimum or maximum of vector of values
;THE MIN AND MAX MACROS FIND THE MIN OR MAX OF THE ITEMS IN THE FIRST
; ARGUMENT LIST. THE SYMBOL NAMED BY THE SECOND ARGUMENT WILL BE
; DEFINED AS THE MIN OR MAX OF THE LIST. IF THE SECOND ARGUMENT
; IS MISSING, "MINSIZ" OR "MAXSIZ" IS DEFINED.
DEFINE MAX(A,B),<
IFB <B>,<MAXSIZ==0
IRP A,<IFG <A-MAXSIZ>,<MAXSIZ==A>>>
IFNB <B>,<B==0
IRP A,<IFG <A-B>,<B==A>>>
> ;END OF DEFINE MAX
DEFINE MIN(A,B),<
IFB <B>,<MINSIZ==377777,,777777
IRP A,<IFG <MINSIZ-A>,<MINSIZ==A>>>
IFNB <B>,<B==377777,,777777
IRP A,<IFG <B-A>,<B==A>>>
> ;END OF DEFINE MIN
SUBTTL LIBVEC - Library run-time system entry vector
; Each entry in this macro represents a routine or variable that must
; be made available to the OTS itself or to programs using the OTS.
; For OTS programs, each entry is declared EXTERNAL if it does not appear
; in the module itself. For non-OTS code, the symbols are defined as offsets
; in the Library Dispatch vector as absolute symbols. This vector
; lives in GLXOTS
; Each modules entry points are grouped together. In order to allow for
; the addition of new routines for each module, there are blank places
; held open. When a new routine is added, remove one of the blank
; occurrences of "CDO". This will keep the vector straight and allow
; the running of older programs without their re-compilation.
; Because the entry through the entry vector is can be of relatively high
; overhead for much used entry points (.RETx, .POPJ are good examples)
; the user may wish to define these routines as global routines in
; GLXINI, and therefore avoid entrance through the entry vector.
; The NT macro allows for this. If one wishes to place any of the
; routines in GLXINI, he should use the NT macro rather than the CDO
; macro. The entry vector in GLXOTS will still be correctly generated
; for older programs, but it will not be defined if GLXINI, and will
; simply be declared global for programs which will call them.
DEFINE LIBVEC <
LSTOF. XCREF
CDO OTSINI ;;GLXOTS INITIALIZATION
CDO ;;GLXCOM
CDO .ZPAGA
CDO .ZPAGN
CDO .ZCHNK
CDO .SAVE1
CDO .SAVE2
CDO .SAVE3
CDO .SAVE4
CDO .SAVET
CDO .SV13
CDO .SV14
CDO .SV15
CDO .SV16
NT .RETT
NT .RETF
CDO .RETE
CDO .AOS ;;USED BY INCR
CDO .SOS ;;USED BY DECR
CDO .ZERO ;;USED BY ZERO
NT .POPJ ;;RETURN (CPOPJ)
CDO .STOP ;;STOPCODE PROCESSOR
CDO .SAVE8 ;;SAVES P1 THRU AC16
CDO .STKST ;;STKVAR SUPPORT CODE
CDO .TRSET ;;TRVAR SUPPORT CODE
NT .POPJ1 ;;SKIP RETURN
CDO .UD2SC ;;Convert from UDT to number of seconds
CDO .SC2UD ;;Convert from seconds to UDT
CDO .CPUTY ;;RETURN CPU TYPE
CDO .DIE ;;NEW STOPCODE PROCESSOR
CDO
CDO
CDO ;;GLXIPC
CDO C%RPRM
CDO C%INTR
CDO C%SEND
CDO C%RECV
CDO C%BRCV
CDO C%REL
CDO C%CPID
CDO C%KPID
CDO C%SPID
CDO C%MAXP
CDO C%PIDJ
CDO C%PIDH
CDO C%SIDX
CDO
CDO
CDO
CDO ;;GLXFIL
CDO F%IOPN
CDO F%AOPN
CDO F%OOPN
CDO F%IBYT
CDO F%OBYT
CDO F%IBUF
CDO F%OBUF
CDO F%REL
CDO F%DREL
CDO F%RREL
CDO F%REW
CDO F%POS
CDO F%CHKP
CDO F%INFO
CDO F%FD
CDO F%REN
CDO F%DEL
CDO F%FCHN
CDO
CDO
CDO
CDO
CDO
CDO
CDO
CDO
CDO FUNCT. ;;GLXFUN
CDO ;;GLXMEM
CDO M%ACQP
CDO M%RELP
CDO M%IPSN
CDO M%NXPG
CDO M%IPRC
CDO M%IPRM
CDO M%AQNP
CDO M%RLNP
CDO M%CLNC
CDO M%FPGS
CDO M%GMEM
CDO M%RMEM
CDO
CDO
CDO
CDO
CDO
CDO
CDO M%GPAG
CDO M%RPAG
CDO
CDO
CDO
CDO
CDO
CDO
CDO
CDO
CDO ;;GLXTXT
CDO T%TEXT
CDO T%TTY
CDO
CDO
CDO
CDO
CDO
CDO
CDO
CDO
CDO
CDO
CDO ;;GLXLNK
CDO L%CLST
CDO L%DLST
CDO L%CENT
CDO L%CBFR
CDO L%DENT
CDO L%NEXT
CDO L%FIRS
CDO L%LAST
CDO L%PREV
CDO L%PREM
CDO L%CURR
CDO L%RENT
CDO L%SIZE
CDO L%APOS
CDO
CDO
CDO
CDO
CDO
CDO
CDO
CDO
CDO ;;GLXINT
CDO I%NOW
CDO I%EXIT
CDO I%ION
CDO I%IOFF
CDO I%SLP
CDO I%INT1
CDO I%INT2
CDO I%INT3
CDO I%TIMR
CDO
CDO
CDO I%SOPR
CDO I%WTO
CDO
CDO I%HOST
CDO I%JINF
CDO I%CJOB
CDO I%KJOB
CDO S%U2DT ;;GLXSCN
CDO S%DT2U
CDO S%DATI
CDO S%SIXB
CDO S%CMND
CDO S%TBLK
CDO S%SCMP
CDO S%ERR
CDO S%INTR
CDO S%EXIT
CDO S%TBAD
CDO S%TBDL
CDO S%NUMI
CDO K%RCOC ;;GLXKBD
CDO K%WCOC
CDO K%SUET
CDO K%STYP
CDO K%TXTI
CDO K%SOUT
CDO K%BOUT
CDO K%BIN
CDO K%BACK
CDO K%TPOS
CDO K%BUFF
CDO K%FLSH
CDO K%OPEN
CDO K%ECHO
CDO
CDO
CDO
CDO
CDO
CDO
CDO
CDO
LSTON.
> ;END OF LIBVEC DEFINITION
SUBTTL PG2ADR,ADR2PG Macros
DEFINE PG2ADR(AC),<LSH AC,^D9>
DEFINE ADR2PG(AC),<LSH AC,-^D9>
SUBTTL Standard Constants
.INFIN==377777,,777777 ;PLUS INFINITY
.MINFI==1B0 ;MINUS INFINITY
LHMASK==777777B17 ;LEFT HALF
RHMASK==777777 ;RIGHT HALF
FWMASK==-1 ;FULL WORD
; BYTE POINTER PARTS
BP.POS==77B5 ;POSITION (BITS TO THE RIGHT)
BP.SIZ==77B11 ;SIZE OF BYTE
BP.ADR==Z -1 ;ADDRESS PORTION
; DEFINE UNIVERSAL TRUE AND FALSE CONSTANTS
FALSE==0
TRUE=-1
; MEMORY CONSTANTS
PAGSIZ==^D512 ;SIZE OF ONE PAGE
MEMSIZ==^D512 ;PAGES IN THE ADDRESS SPACE
; DEBUGGING CONSTANTS
SYSPRM DDTADR,.JBDDT,770000 ;LOCATION CONTAINING START OF DDT
SYSPRM DEBUGW,.JBOPS,135 ;SPECIAL "DEBUGGING" WORD
SUBTTL Control Character Symbols
.CHNUL==000 ;NULL
.CHCNA==001
.CHCNB==002
.CHCNC==003
.CHCND==004
.CHCNE==005
.CHCNF==006
.CHBEL==007 ;BELL
.CHBSP==010 ;BACKSPACE
.CHTAB==011 ;TAB
.CHLFD==012 ;LINE-FEED
.CHVTB==013 ;VERTICAL TAB
.CHFFD==014 ;FORM FEED
.CHCRT==015 ;CARRIAGE RETURN
.CHCNN==016
.CHCNO==017
.CHCNP==020
.CHCNQ==021
.CHCNR==022
.CHCNS==023
.CHCNT==024
.CHCNU==025
.CHCNV==026
.CHCNW==027
.CHCNX==030
.CHCNY==031
.CHCNZ==032
.CHESC==033 ;ESCAPE
.CHCBS==034 ;CONTROL BACK SLASH
.CHCRB==035 ;CONTROL RIGHT BRACKET
.CHCCF==036 ;CONTROL CIRCONFLEX
.CHCUN==037 ;CONTROL UNDERLINE
.CHLAB=="<" ;CHARACTERS WHICH DRIVE
.CHRAB==">" ;UP A WALL
.CHALT==175 ;OLD ALTMODE
.CHAL2==176 ;ALTERNATE OLD ALTMODE
.CHDEL==177 ;DELETE
SUBTTL Processor definitions
%PDP6==0 ;PDP-6 CP166 PROCESSOR
%KA10==1 ;PDP-10 KA10 PROCESSOR
%KI10==2 ;PDP-10 KI10 PROCESSOR
%KL10==3 ;PDP-10 KL10 PROCESSOR
%KS10==4 ;PDP-10 KS10 PROCESSOR
%XXXX==5 ;PDP-10 XXXX PROCESSOR
SUBTTL PC word flags
; TOPS-10 PC flags
;
PC.OVF==1B0 ;OVERFLOW
PC.CY0==1B1 ;CARRY 0
PC.CY1==1B2 ;CARRY 1
PC.FOV==1B3 ;FLOATING OVERFLOW
PC.BIS==1B4 ;BYTE INCREMENT SUPPRESSION
PC.USR==1B5 ;USER MODE
PC.UIO==1B6 ;USER IOT MODE
PC.LIP==1B7 ;LAST INSTRUCTION PUBLIC
PC.AFI==1B8 ;ADDRESS FAILURE INHIBIT
PC.ATN==3B10 ;APR TRAP NUMBER
PC.FUF==1B11 ;FLOATING UNDERFLOW
PC.NDV==1B12 ;NO DIVIDE
; TOPS-20 PC flags
;
PC%OVF==1B0 ;OVERFLOW
PC%CY0==1B1 ;CARRY 0
PC%CY1==1B2 ;CARRY 1
PC%FOV==1B3 ;FLOATING OVERFLOW
PC%BIS==1B4 ;BYTE INCREMENT SUPPRESSION
PC%USR==1B5 ;USER MODE
PC%UIO==1B6 ;USER IOT MODE
PC%LIP==1B7 ;LAST INSTRUCTION PUBLIC
PC%AFI==1B8 ;ADDRESS FAILURE INHIBIT
PC%ATN==3B10 ;APR TRAP NUMBER
PC%FUF==1B11 ;FLOATING UNDERFLOW
PC%NDV==1B12 ;NO DIVIDE
SUBTTL Field and Mask Macros
;STANDARD MACROS
;MACROS TO HANDLE FIELD MASKS
;COMPUTE LENGTH OF MASK, I.E. LENGTH OF LEFTMOST STRING OF ONES
;REMEMBER THAT ^L DOES 'JFFO', I.E. HAS VALUE OF FIRST ONE BIT IN WORD
;COMPUTE WIDTH OF MASK, I.E. LENGTH OF LEFTMOST STRING OF ONES
DEFINE WID(MASK)<<^L<-<<MASK>_<^L<MASK>>>-1>>>
;COMPUTE POSITION OF MASK, I.E. BIT POSITION OF RIGHTMOST ONE IN MASK
DEFINE POS(MASK)<<^L<<MASK>&<-<MASK>>>>>
;CONSTRUCT BYTE POINTER TO MASK
DEFINE POINTR(LOC,MASK)<<POINT WID(MASK),LOC,POS(MASK)>>
;PUT RIGHT-JUSTIFIED VALUE INTO FIELD SPECIFIED BY MASK
DEFINE FLD(VALUE,MASK),<<<<VALUE>B<POS(<MASK>)>>&<MASK>>>
;MAKE VALUE BE RIGHT JUSTIFIED IN WORD.
DEFINE .RTJST(VAL,MSK)<<VAL>B<^D70-POS(MSK)>>
;CONSTRUCT MASK FROM BIT AA TO BIT BB. I.E. MASKB 0,8 = 777B8
DEFINE MASKB (AA,BB)<1B<<AA>-1>-1B<BB>>
;MODULE - GIVES REMAINDER OF DEND DIVIDED BY DSOR
DEFINE MOD. (DEND,DSOR)<<DEND-<DEND/DSOR>*DSOR>>
;OLD STYLE MACTEN TYPE CALLS
;MACRO TO BUILD A MASK "WID" BITS WIDE, WITH ITS RIGHTMOST BIT
; IN THE BIT POSITION "POS".
DEFINE MASK.(WID,POS),<<<<1_<WID>>-1>B<POS>>>
;INVSL. POSITIONS VALUE IN MASK TO BE REPLACED BY FLD(VALUE,MASK)
DEFINE INSVL.(VALUE,MASK),<<<<VALUE>B<POS(<MASK>)>>&<MASK>>>
SUBTTL MOVX
;MOVX - LOAD AC WITH CONSTANT
DEFINE MOVX (AC,MSK)<
..MX1==MSK ;;EVAL EXPRESSION IF ANY
IFDEF .PSECT,<
.IFN ..MX1,ABSOLUTE,<
MOVE AC,[MSK]>
.IF ..MX1,ABSOLUTE,<
..MX2==0 ;;FLAG SAYS HAVEN'T DONE IT YET
IFE <..MX1>B53,<
..MX2==1
MOVEI AC,..MX1> ;;LH 0, DO AS RH
IFE ..MX2,< ;;IF HAVEN'T DONE IT YET,
IFE <..MX1>B17,<
..MX2==1
MOVSI AC,(..MX1)>> ;;RH 0, DO AS LH
IFE ..MX2,< ;;IF HAVEN'T DONE IT YET,
IFE <<..MX1>B53-^O777777>,<
..MX2==1
HRROI AC,<..MX1>>> ;;LH -1
IFE ..MX2,< ;;IF HAVEN'T DONE IT YET,
IFE <<..MX1>B17-^O777777B17>,<
..MX2==1
HRLOI AC,(..MX1-^O777777)>> ;;RH -1
IFE ..MX2,< ;;IF STILL HAVEN'T DONE IT,
MOVE AC,[..MX1]> ;;GIVE UP AND USE LITERAL
>>
IFNDEF .PSECT,<
..MX2==0 ;;FLAG SAYS HAVEN'T DONE IT YET
IFE <..MX1>B53,<
..MX2==1
MOVEI AC,..MX1> ;;LH 0, DO AS RH
IFE ..MX2,< ;;IF HAVEN'T DONE IT YET,
IFE <..MX1>B17,<
..MX2==1
MOVSI AC,(..MX1)>> ;;RH 0, DO AS LH
IFE ..MX2,< ;;IF HAVEN'T DONE IT YET,
IFE <<..MX1>B53-^O777777>,<
..MX2==1
HRROI AC,<..MX1>>> ;;LH -1
IFE ..MX2,< ;;IF HAVEN'T DONE IT YET,
IFE <<..MX1>B17-^O777777B17>,<
..MX2==1
HRLOI AC,(..MX1-^O777777)>> ;;RH -1
IFE ..MX2,< ;;IF STILL HAVEN'T DONE IT,
MOVE AC,[..MX1]> ;;GIVE UP AND USE LITERAL
>
PURGE ..MX1,..MX2>
SUBTTL CAX - COMPARE MACROS
;CREATE THE CAX MACRO DEFINITIONS
DEFINE ..DOCX (T)<
IRP T,<
DEFINE CAX'T (AC,MSK)<
..CX(T,AC,MSK)>>>
..DOCX (<,L,LE,E,G,GE,N,A>) ;DO 8 DEFINITIONS
PURGE ..DOCX
DEFINE ..CX(T,AC,MSK)<
..CX1==MSK
IFDEF .PSECT,<
.IFN ..CX1,ABSOLUTE,<
CAM'T AC,[MSK]>
.IF ..CX1,ABSOLUTE,< ;;MASK IS TESTABLE
..CX2==0 ;;MARK NOT DONE
IFE <..CX1&^O777777B17>,<
..CX2==1 ;;LH 0 CAN DO CAI
CAI'T AC,MSK>
IFE ..CX2,< ;;MUST USE CAM
CAM'T AC,[MSK]>
PURGE ..CX1,..CX2>>
IFNDEF .PSECT,<
..CX2==0 ;;MARK NOT DONE
IFE <..CX1&^O777777B17>,<
..CX2==1 ;;LH 0 CAN USE CAI
CAI'T AC,MSK>
IFE ..CX2,< ;;MUST USE CAM
CAM'T AC,[MSK]>
PURGE ..CX1,..CX2>>
SUBTTL ADDX, SUBX, IMULX, MULX, IDIVX & DIVX MACROS
;ALL MACROS JUST CALL ..AS OR ..OP WHICH DO ALL THE WORK
DEFINE ADDX(AC,VAL) <..AS(AC,VAL,ADD,SUB)>
DEFINE SUBX(AC,VAL) <..AS(AC,VAL,SUB,ADD)>
DEFINE IMULX(AC,VAL) <..OP(AC,VAL,IMUL)>
DEFINE MULX(AC,VAL) <..OP(AC,VAL,MUL)>
DEFINE IDIVX(AC,VAL) <..OP(AC,VAL,IDIV)>
DEFINE DIVX(AC,VAL) <..OP(AC,VAL,DIV)>
DEFINE ..AS(AC,VAL,OPR,ALT)<
..AS1==-<VAL> ;;GET COMPLIMENT OF VALUE
IFDEF .PSECT,<
.IFN ..AS1,ABSOLUTE,<
OPR AC,[-..AS1]> ;;MUST USE LITERAL
.IF ..AS1,ABSOLUTE,<
..AS2==0 ;;MARK NOT DONE
IFE <..AS1&^O777777B17>,<
..AS2==1 ;;CAN USE ALTERNATE IMMEDIATE
ALT'I AC,..AS1>
IFE ..AS2,<
..OP(AC,VAL,OPR)> ;;MUST DO IMMEDIATE OR LITERAL
PURGE ..AS1,..AS2>>
IFNDEF .PSECT,<
..AS2==0 ;;MARK NOT DONE
IFE <..AS1&^O777777B17>,<
..AS2==1 ;;CAN DO ALTERNATE IMMEDIATE
ALT'I AC,..AS1>
IFE ..AS2,< ;;MUST DO IMMEDIATE OR LITERAL
..OP(AC,VAL,OPR)>
PURGE ..AS1,..AS2>>
DEFINE ..OP(AC,VAL,OPR)<
..OP1==VAL
IFDEF .PSECT,<
.IFN ..OP1,ABSOLUTE,<
OPR AC,[..OP1]>
.IF ..OP1,ABSOLUTE,< ;;MASK IS TESTABLE
..OP2==0 ;;MARK NOT DONE
IFE <..OP1&^O777777B17>,<
..OP2==1 ;;LH 0 CAN DO IMMEDIATE
OPR'I AC,..OP1>
IFE ..OP2,< ;;MUST USE LITERAL
OPR AC,[..OP1]>
PURGE ..OP1,..OP2>>
IFNDEF .PSECT,<
..OP2==0 ;;MARK NOT DONE
IFE <..OP1&^O777777B17>,<
..OP2==1 ;;LH 0 CAN USE IMMEDIATE
OPR'I AC,..OP1>
IFE ..OP2,< ;;MUST USE LITERAL
OPR AC,[..OP1]>
PURGE ..OP1,..OP2>>
SUBTTL TX -- TEST MASK
;CREATE THE TX MACRO DEFINITIONS
;THIS DOUBLE IRP CAUSES ALL COMBINATIONS OF MODIFICATION AND TESTING
;TO BE DEFINED
DEFINE ..DOTX (M,T)<
IRP M,<
IRP T,<
DEFINE TX'M'T (AC,MSK)<
..TX(M'T,AC,<MSK>)>>>>
..DOTX (<N,O,Z,C>,<,E,N,A>) ;DO ALL DEFINITIONS
PURGE ..DOTX
;..TX
;ALL TX MACROS JUST CALL ..TX WHICH DOES ALL THE WORK
DEFINE ..TX(MT,AC,MSK)<
..TX1==MSK ;;EVAL EXPRESSION IF ANY
IFDEF .PSECT,<
.IFN ..TX1,ABSOLUTE,<
TD'MT AC,[MSK]>
.IF ..TX1,ABSOLUTE,< ;;MASK MUST BE TESTABLE
..TX2==0 ;;FLAG SAYS HAVEN'T DONE IT YET
IFE <..TX1&^O777777B17>,<
..TX2==1 ;;LH 0, DO AS RH
TR'MT AC,..TX1>
IFE ..TX2,< ;;IF HAVEN'T DONE IT YET,
IFE <..TX1&^O777777>,<
..TX2==1 ;;RH 0, DO AS LH
TL'MT AC,(..TX1)>>
IFE ..TX2,< ;;IF HAVEN'T DONE IT YET,
IFE <<..TX1>B53-^O777777>,< ;;IF LH ALL ONES,
..TX3 (MT,AC)>> ;;TRY Z,O,C SPECIAL CASES
IFE ..TX2,< ;;IF STILL HAVEN'T DONE IT,
TD'MT AC,[..TX1]> ;;MUST GIVE UP AND USE LITERAL
PURGE ..TX1,..TX2>>
IFNDEF .PSECT,<
..TX2==0 ;;FLAG SAYS HAVEN'T DONE IT YET
IFE <..TX1&^O777777B17>,<
..TX2==1 ;;LH 0, DO AS RH
TR'MT AC,..TX1>
IFE ..TX2,< ;;IF HAVEN'T DONE IT YET,
IFE <..TX1&^O777777>,<
..TX2==1 ;;RH 0, DO AS LH
TL'MT AC,(..TX1)>>
IFE ..TX2,< ;;IF HAVEN'T DONE IT YET,
IFE <<..TX1>B53-^O777777>,< ;;IF LH ALL ONES,
..TX3 (MT,AC)>> ;;TRY Z,O,C SPECIAL CASES
IFE ..TX2,< ;;IF STILL HAVEN'T DONE IT,
TD'MT AC,[..TX1]> ;;MUST GIVE UP AND USE LITERAL
PURGE ..TX1,..TX2>>
;SPECIAL CASE FOR LH ALL ONES
DEFINE ..TX3 (MT,AC)<
IFIDN <MT><Z>,< ;;IF ZEROING WANTED
..TX2==1
ANDI AC,^-..TX1> ;;CAN DO IT WITH ANDI
IFIDN <MT><O>,< ;;IF SET TO ONES WANTED
..TX2==1
ORCMI AC,^-..TX1> ;;CAN DO IT WITH IORCM
IFIDN <MT><C>,< ;;IF COMPLEMENT WANTED
..TX2==1
EQVI AC,^-..TX1>> ;;CAN DO IT WITH EQV
;VARIENT MNEMONICS FOR TX DEFINITIONS
DEFINE IORX (AC,MSK)<
TXO AC,<MSK>>
DEFINE ANDX (AC,MSK)<
TXZ AC,<^-<MSK>>>
DEFINE XORX (AC,MSK)<
TXC AC,<MSK>>
SUBTTL SUBFUNCTION MACROS
;.IF0 CONDITION, ACTION IF CONDITION 0, ACTION OTHERWISE
DEFINE .IF0 (COND,THEN,ELSE)<
..IFT==COND ;;GET LOCAL VALUE FOR CONDITION
IFE ..IFT,<
THEN
..IFT==0> ;;RESTORE IN CASE CHANGED BY NESTED .IF0
IFN ..IFT,<
ELSE>>
;CASE (NUMBER,<FIRST,SECOND,...,NTH>)
DEFINE .CASE (NUM,LIST)<
..CSN==NUM
..CSC==0
IRP LIST,<
IFE ..CSN-..CSC,<
STOPI
..CAS1 (LIST)>
..CSC==..CSC+1>>
DEFINE ..CAS1 (LIST)<
LIST>
;TEST FOR FULL WORD, RH, LH, OR ARBITRARY BYTE
DEFINE ..TSIZ (SYM,MSK)<
SYM==3 ;;ASSUME BYTE UNLESS...
IFE <MSK>+1,<SYM=0> ;;FULL WORD IF MASK IS -1
IFE <MSK>-^O777777,<SYM==1> ;;RH IF MASK IS 777777
IFE <MSK>-^O777777B17,<SYM==2>> ;;LH IF MAST IS 777777,,0
;TEST FOR LOC BEING AN AC -- SET SYM TO 1 IF AC, 0 IF NOT AC
DEFINE ..TSAC (SYM,LOC)<
IFNDEF .PSECT,<
SYM==0 ;;ASSUME NOT AC UNLESS...
..TSA1==<Z LOC> ;;LOOK AT LOC
IFE ..TSA1&^O777777777760,<SYM==1> ;;AC IF VALUE IS 0-17
>
IFDEF .PSECT,<
SYM==0 ;;ASSUME NOT AC UNLESS...
..TSA1==<Z LOC> ;;LOOK AT LOC
.IF ..TSA1,ABSOLUTE,< ;;SEE IF WE CAN TEST VALUE
IFE ..TSA1&^O777777777760,<SYM==1>> ;;AC IF VALUE IS 0-17
PURGE ..TSA1>>
;FUNCTION TO TEST FOR MASK CONTAINING EXACTLY ONE BIT. RETURNS
;1 IFF LEFTMOST BIT AND RIGHTMOST BIT ARE SAME
DEFINE ..ONEB (SYM,MSK)<
SYM==<<<-<MSK>>&<MSK>>&<1B<^L<MSK>>>>>
SUBTTL DEFSTR -- DEFINE DATA STRUCTURE
;DEFINE DATA STRUCTURE
; NAM - NAME OF STRUCTURE AS USED IN CODE
; LOCN - ADDRESS OF DATA
; POS - POSITION OF DATA WITHIN WORD (RIGHTMOST BIT NUMBER)
; SIZ - SIZE OF DATA (IN BITS) WITHIN WORD
DEFINE DEFSTR (NAM,LOCN,POS,SIZ)<
NAM==<-1B<POS>+1B<POS-SIZ>> ;;ASSIGN SYMBOL TO HOLD MASK
IF1,<IFDEF %'NAM,<PRINTX ?NAM ALREADY DEFINED>>
DEFINE %'NAM (OP,AC,Y,MSK)< ;;DEFINE MACRO TO HOLD LOCATION
IFDIF <Y><>,<
OP (<AC>,LOCN'+'Y,MSK)>
IFIDN <Y><>,<
OP (<AC>,LOCN''Y,MSK)>>>
;ALTERNATE FORM OF DEFSTR -- TAKES MASK INSTEAD OF POS,SIZ
DEFINE MSKSTR (NAM,LOCN,MASK)<
NAM==MASK ;;ASSIGN SYMBOL TO HOLD MASK
IF1,<IFDEF %'NAM,<PRINTX ?NAM ALREADY DEFINED>>
DEFINE %'NAM (OP,AC,Y,MSK)< ;;DEFINE MACRO TO HOLD LOCATION
IFDIF <Y><>,<
OP (<AC>,LOCN'+'Y,MSK)>
IFIDN <Y><>,<
OP (<AC>,LOCN''Y,MSK)>>>
;..STR0 - PROCESS INSTANCE OF STRUCTURE USAGE, SINGLE STRUCTURE CASE.
DEFINE ..STR0 (OP,AC,STR,Y)<
IFNDEF STR,<PRINTX STR IS NOT DEFINED
OP (<AC>,Y,FWMASK)> ;;RESERVE A WORD, ASSUME WORD MASK
IFDEF STR,<
IFNDEF %'STR,<
OP (<AC>,Y,STR)> ;;ASSUME NO OTHER LOCN
IFDEF %'STR,<
%'STR (OP,<AC>,Y,STR)>>> ;;DO IT
;..STR1, ..STR2, ..STR3, AND ..STR4 ARE INTERNAL MACROS FOR PROCESSING
;INSTANCES OF STRUCTURE USAGE.
DEFINE ..STR1 (OP,AC,STR,Y,CLL)<
..NS==0 ;;INIT COUNT OF STR'S
IRP STR,<..NS=..NS+1> ;;COUNT STR'S
IFE ..NS,<PRINTX ?EMPTY STRUCTURE LIST, OP>
IFE ..NS-1,< ;;THE ONE CASE, CAN DO FAST
..STR0 (OP,<AC>,<STR>,Y)>
IFG ..NS-1,< ;;MORE THAN ONE, DO GENERAL CASE
..ICNS ;;INIT REMOTE MACRO
..CNS (<CLL (OP,<AC>,,>) ;;CONS ON CALL AND FIRST ARGS
IRP STR,< ;;DO ALL NAMES IN LIST
IFNDEF STR,<PRINTX STR NOT DEFINED>
IFDEF STR,<
IFNDEF %'STR,<
..CNS (<,STR,Y>)> ;;ASSUME NO OTHER LOCN
IFDEF %'STR,<
%'STR (..STR2,,Y,STR)> ;;STR MACRO WILL GIVE LOCN TO ..STR2
..CNS (<)>) ;;CLOSE ARG LIST
..GCNS ;;DO THIS AND PREVIOUS NAME
..ICNS ;;REINIT CONS
..CNS (<CLL (OP,<AC>>) ;;PUT ON FIRST ARGS
IFNDEF %'STR,<
..CNS (<,STR,Y>)> ;;ASSUME NO OTHER LOCN
IFDEF %'STR,<
%'STR (..STR2,,Y,STR)>>> ;;PUT ON THIS ARG, END IRP
..CNS (<,,)>) ;;CLOSE ARG LIST
..GCNS>> ;;DO LAST CALL
;..STR2 -- CALLED BY ABOVE TO APPEND STRUCTURE NAME AND LOC TO ARG LIST
DEFINE ..STR2 (AA,LOC,STR)<
..CNS (<,STR,LOC>)> ;;CONS ON NEXT ARG PAIR
;..STR3 -- CHECK FOR ALL STRUCTURES IN SAME REGISTER
DEFINE ..STR3 (OP,AC,S1,L1,S2,L2)<
IFDIF <L1><L2>,<
IFNB <L1>,<
OP (<AC>,L1,..MSK) ;;DO ACCUMULATED STUFF
IFNB <L2>,<PRINTX S1 AND S2 ARE IN DIFFERENT WORDS>>
..MSK==0> ;;INIT MASK
IFNB <L2>,<
..MSK=..MSK!<S2>>>
;..STR4 -- COMPARE SUCCESSIVE ITEMS, DO SEPARATE OPERATION IF
;DIFFERENT WORDS ENCOUNTERED
DEFINE ..STR4 (OP,AC,S1,L1,S2,L2)<
IFDIF <L1><L2>,< ;;IF THIS DIFFERENT FROM PREVIOUS
IFNB <L1>,<
OP (<AC>,L1,..MSK)> ;;DO PREVIOUS
..MSK==0> ;;REINIT MASK
IFNB <L2>,<
..MSK=..MSK!<S2>>> ;;ACCUMULATE MASK
;..STR5 - SAME AS ..STR4 EXCEPT GIVES EXTRA ARG IF MORE STUFF TO
;FOLLOW.
DEFINE ..STR5 (OP,AC,S1,L1,S2,L2)<
IFDIF <L1><L2>,< ;;IF THIS DIFFERENT FROM PREVIOUS,
IFNB <L1>,<
IFNB <L2>,< ;;IF MORE TO COME,
OP'1 (AC,L1,..MSK)> ;;DO VERSION 1
IFB <L2>,< ;;IF NO MORE,
OP'2 (AC,L1,..MSK)>> ;;DO VERSION 2
..MSK==0> ;;REINIT MASK
IFNB <L2>,<
..MSK=..MSK!<S2>>> ;;ACCUMULATE MASK
;'REMOTE' MACROS USED TO BUILD UP ARG LIST
;INITIALIZE CONS -- DEFINES CONS
DEFINE ..ICNS <
DEFINE ..CNS (%%%)<
..CNS2 <%%%>,>
DEFINE ..CNS2 (NEW,OLD)<
DEFINE ..CNS (%%%)<
..CNS2 <%%%>,<OLD'NEW>>>
>
;GET CONS -- EXECUTE STRING ACCUMULATED
DEFINE ..GCNS <
DEFINE ..CNS2 (NEW,OLD)<
OLD> ;;MAKE ..CNS2 DO THE STUFF
..CNS ()> ;;GET ..CNS2 CALLED WITH THE STUFF
SUBTTL STKVAR - STACK VARIABLE FACILITY
;MACRO FOR ALLOCATING VARIABLES ON THE STACK. ITS ARGUMENT IS
;A LIST OF ITEMS. EACH ITEM MAY BE:
; 1. A SINGLE VARIABLE WHICH WILL BE ALLOCATED ONE WORD
; 2. A VARIABLE AND SIZE PARAMETER WRITTEN AS <VAR,SIZ>. THE
; VARIABLE WILL BE ALLOCATED THE SPECIFIED NUMBER OF WORDS.
;RETURN FROM A SUBROUTINE USING THIS FACILITY MUST BE VIA
;RET OR RETSKP. A DUMMY RETURN WHICH FIXES UP THE STACK IS PUT ON
;THE STACK AT THE POINT THE STKVAR IS ENCOUNTERED.
;WITHIN THE RANGE OF A STKVAR, PUSH/POP CANNOT BE USED AS THEY WILL
;CAUSE THE VARIABLES (WHICH ARE DEFINED AS RELATIVE STACK LOCATIONS)
;TO REFERENCE THE WRONG PLACE.
;TYPICAL USE: STKVAR <AA,BB,<QQ,5>,ZZ>
DEFINE STKVAR (ARGS)<
..STKR==10 ;;REMEMBER RADIX
RADIX 8
..STKN==0
IRP ARGS,<
.STKV1 (ARGS)>
$CALL .STKST
..STKN,,..STKN
RADIX ..STKR
DEFINE ENDSV.<.ENSV1 <ARGS>>
PURGE ..STKN,..STKR,..STKQ
>
;INTERMEDIATE MACRO TO PEAL OFF ANGLEBRACKETS IF ANY
DEFINE .STKV1 (ARG)<
.STKV2 (ARG)>
;INTERMEDIATE MACRO TO CALCULATE OFFSET AND COUNT VARIABLES
DEFINE .STKV2 (VAR,SIZ)<
IFB <SIZ>,<..STKN==..STKN+1>
IFNB <SIZ>,<..STKN==..STKN+SIZ>
..STKQ==..STKN+1
.STKV3 (VAR,\..STKQ)>
;INNERMOST MACRO TO DEFINE VARIABLE
DEFINE .STKV3 (VAR,LOC)<
IFDEF VAR,<.IF VAR,SYMBOL,<PRINTX STKVAR VAR ALREADY DEFINED>>
DEFINE VAR<-^O'LOC(P)>
$'VAR==<Z VAR>> ;SYMBOL FOR DDT
DEFINE .ENSV1 (ARGS)<
IRP ARGS,<
.ENSV2 (ARGS)>>
DEFINE .ENSV2 (ARG)<
.ENSV3 (ARG)>
DEFINE .ENSV3 (ARG,SIZ)<
DEFINE ARG<....U>>
SUBTTL TRVAR - TRANSIENT VARIABLE FACILITY
;TRANSIENT (STACK) VARIABLE FACILITY - EQUIVALENT TO STKVAR
;EXCEPT ALLOWS VARIABLES TO BE USED WITHIN LOWER LEVEL ROUTINES
;AND AFTER OTHER THINGS HAVE BEEN PUSHED ON STACK.
;N.B. USES .FP AS FRAME POINTER - MUST NOT BE CHANGED WHILE
;VARIABLES IN USE.
DEFINE TRVAR (VARS)<
..TRR==10 ;;REMEMBER CURRENT RADIX
RADIX 8
..NV==1 ;;INIT COUNT OF STACK WORDS
IRP VARS,<
.TRV1 (VARS)> ;;PROCESS LIST
$CALL .TRSET ;;ALLOCATE STACK SPACE, SET UP .FP
..NV-1,,..NV-1
RADIX ..TRR ;;RESTORE RADIX
PURGE ..TRR,..NV> ;;CLEAN UP
DEFINE .TRV1 (VAR)<
.TRV2 (VAR)> ;;PEEL OFF ANGLEBRACKETS IF ANY
DEFINE .TRV2 (NAM,SIZ)<
.TRV3 (NAM,\..NV) ;;DEFINE VARIABLE
IFB <SIZ>,<..NV=..NV+1>
IFNB <SIZ>,<..NV=..NV+SIZ>>
DEFINE .TRV3 (NAM,LOC)<
IFDEF NAM,<.IF NAM,SYMBOL,<PRINTX TRVAR NAM ALREADY DEFINED>>
DEFINE NAM<^O'LOC(.FP)>
$'NAM==<Z NAM>> ;;SYMBOL FOR DDT
;AC VARIABLE FACILITY
.FPAC==P1 ;FIRST PRESERVED AC
.NPAC==10 ;NUMBER OF PRESERVED AC'S
DEFINE ACVAR (LIST)<
..NAC==0 ;;INIT NUMBER OF ACS USED
IRP LIST,<
.ACV1 (LIST)> ;;PROCESS ITEMS
.ACV3 (\..NAC)> ;;SAVE ACS USED
DEFINE .ACV1 (ITEM)<
.ACV2 (ITEM)> ;;PEEL OFF ANGLEBRACKETS IF ANY
DEFINE .ACV2 (NAM,SIZ)<
NAM=.FPAC+..NAC ;;DEFINE VARIABLE
IFB <SIZ>,<..NAC=..NAC+1>
IFNB <SIZ>,<..NAC=..NAC+SIZ>>
DEFINE .ACV3 (N)<
IFG N-.NPAC,<PRINTX ?TOO MANY ACS USED>
IFLE N-4,<
$CALL .SAVE'N> ;;SAVE ACTUAL NUMBER USED
IFG N-4,<
$CALL .SAVE8>> ;;SAVE ALL
SUBTTL SAVE MACRO DEFINITION
;VARIABLE SAVE FACILITY -- ACCEPTS A LIST OF ARGUMENTS
; $SAVE <LIST-OF-VARIABLES>
;AUTOMATICALLY RESTORES ALL NAMED VARIABLES ON RETURN FROM ROUTINE
; SUPPORTS +1 OR +2 RETURNS
;IF AN APPROPRIATE CO-ROUTINE IS DEFINED IN GLXCOM FOR THE DESIRED
;AC'S IT IS USED, OTHERWISE A CALL-SPECIFIC CO-ROUTINE IS GENERATED
;IN A LITERAL.
;IF THE SAME SET OF VARIABLES IS SAVED MORE THAN ONCE IN A PROGRAM,
;THE CO-ROUTINE GENERATED IN THE LITERALS IS SHARED BETWEEN THE
;TWO SAVES.
DEFINE $SAVE(ARG)<
.NVR==0 ;;INITILIZE VARIABLE COUNT
.ACM==0 ;;INITIALIZE AC MASK
IRP ARG,< ;;BUILD AC MASK AND PUSH OTHER VARIABLES
..TSAC(.ACB,ARG) ;;IS IT AN AC?
IFN .ACB,<.ACM==.ACM!1B<ARG>> ;;YES -- BUILD MASK
IFE .ACB,< ;;NO -- PUSH IT
IFE .NVR,< ;;FIRST VARIABLE?
PUSHJ P,[ ;;YES -- START CO-ROUTINE
>
..PUSH(ARG,\<.NVR+1>)>> ;;PUSH IT AND BUMP COUNT
IFE .NVR,< ;;DON'T DO AC CO-ROUTINE IF OTHER VARIABLES
IFN .ACM,< ;;CHECK FOR PROPER AC CO-ROUTINE
IFE <.ACM-17B<T4>>,<.ACM==0
$CALL .SAVET>
IFE <.ACM-377B<.A16>>,<.ACM==0
$CALL .SAVE8>
IFE <.ACM-17B<P4>>,<.ACM==0
$CALL .SAVE4>
IFE <.ACM-7B<P3>>,<.ACM==0
$CALL .SAVE3>
IFE <.ACM-3B<P2>>,<.ACM==0
$CALL .SAVE2>
IFE <.ACM-1B<P1>>,<.ACM==0
$CALL .SAVE1>
IFE <.ACM-1B<.A13>>,<.ACM==0
$CALL .SV13>
IFE <.ACM-1B<.A14>>,<.ACM==0
$CALL .SV14>
IFE <.ACM-1B<.A15>>,<.ACM==0
$CALL .SV15>
IFE <.ACM-1B<.A16>>,<.ACM==0
$CALL .SV16>
>>
IFN .ACM,< ;;PUSH THE AC'S IF NOT DONE BY CO-ROUTINE
IFE .NVR,< ;;FIRST ONE?
PUSHJ P,[ ;;YES, START CO-ROUTINE
>
.ACB==0 ;;START AT AC0
REPEAT ^D16,< ;;LOOP THRU ALL 16
IFN <.ACM&1B<.ACB>>,< ;;WAS IT GIVEN?
..PUSH(\.ACB,\<.NVR+1>)>;;YES -- PUSH IT
.ACB==.ACB+1>> ;;STEP TO NEXT
IFN .NVR,< ;;BUILD CO-CALL AND RESTORES
PUSHJ P,@-.NVR(P) ;;CALL OUR CALLER
TRNA ;;NON-SKIP
AOS -1-.NVR(P) ;;PROPAGATE SKIP RETURN
REPEAT .NVR,<..POP(\.NVR)> ;;POP ALL THINGS STACKED
ADJSP P,-1 ;;USELESS CALLER ADDRESS
POPJ P,]> ;;RETURN TO CALLER'S CALLER
> ;END OF $SAVE DEFINITION
DEFINE ..PUSH(ARG,.NVX)<
PUSH P,ARG
DEFINE .NV'.NVX<ARG>
.NVR==.NVR+1>
DEFINE ..POP(.NVX)<
POP P,.NV'.NVX
PURGE .NV'.NVX
.NVR==.NVR-1>
SUBTTL LOAD,STORE,INCR,DECR,ZERO
DEFINE LOAD (AC,Y,STR)<
IFNB <STR>,<..STR0 (..LDB,AC,STR,Y)>
IFB <STR>,<MOVE AC,Y>> ;;DEFAULT TO FULL WORD MOVE
DEFINE ..LDB (AC,LOC,MSK)<
..TSIZ (..PST,MSK)
.CASE ..PST,<<
MOVE AC,LOC>,<
HRRZ AC,LOC>,<
HLRZ AC,LOC>,<
LDB AC,[POINTR (LOC,MSK)]>>>
DEFINE STORE (AC,Y,STR)<
IFNB <STR>,<..STR0 (..DPB,AC,STR,Y)>
IFB <STR>,<MOVEM AC,Y>> ;;DEFAULT FULL WORD MOVE
DEFINE ..DPB (AC,LOC,MSK)<
..TSIZ (..PST,MSK)
.CASE ..PST,<<
MOVEM AC,LOC>,<
HRRM AC,LOC>,<
HRLM AC,LOC>,<
DPB AC,[POINTR (LOC,MSK)]>>>
DEFINE INCR (Y,STR)<
IFNB <STR>,<..STR0 (.INCR0,,<STR>,Y)>
IFB <STR>,<AOS Y>> ;;DEFAULT FULL WORD INCR
DEFINE .INCR0 (AC,LOC,MSK)<
..PST==MSK-FWMASK
.IF0 ..PST,<
AOS LOC>,< ;;FULL WORD, CAN USE AOS
$CALL .AOS ;;MUST USE SUPPORT CODE
LSTOF.
JUMP [POINTR(LOC,MSK)]
LSTON.>>
DEFINE DECR (Y,STR)<
IFNB <STR>,<..STR0 (.DECR0,,<STR>,Y)>
IFB <STR>,<SOS Y>> ;;DEFAULT FULL WORD DECR
DEFINE .DECR0 (AC,LOC,MSK)<
..PST==MSK-FWMASK
.IF0 ..PST,<
SOS LOC>,< ;;FULL WORD, CAN USE SOS
$CALL .SOS ;;MUST USE SUPPORT CODE
LSTOF.
JUMP [POINTR(LOC,MSK)]
LSTON.>>
DEFINE ZERO (Y,STR)<
IFNB <STR>,<..STR1 (..TQZ,,<STR>,Y,..STR4)>
IFB <STR>,<SETZM Y>> ;;DEFAULT FULL WORD ZERO
DEFINE ..TQZ (AC,LOC,MSK)<
..TSIZ (..PST,MSK) ;;SET ..PST TO CASE NUMBER
.CASE ..PST,<<
SETZM LOC>,< ;;FULL WORD
HLLZS LOC>,< ;;RH
HRRZS LOC>,< ;;LH
..TSAC (..ACT,LOC) ;;SEE IF LOC IS AC
.IF0 ..ACT,<
$CALL .ZERO ;;NO -- MUST USE SUPPORT CODE
LSTOF.
JUMP [POINTR(LOC,MSK)]
LSTON.>,<
..TX (Z,LOC,MSK)>>>>
SUBTTL BLISS-style call macro
;CALL STACK-STYLE (BLISS) SUBROUTINE
;THIS MACRO TAKES THE NAME OF THE SUBROUTINE AND A LIST OF ARGUMENTS.
;EACH ARGUMENT IN THE ARG LIST IS ONE OF THE FOLLOWING:
; 1. A NORMAL EFFECTIVE ADDRESS SPECIFICATION, E.G. FOO, @FIE(X)
; 2. AN IMMEDIATE ADDRESS WRITTEN AS <.,ADR> WHERE ADR IS AN EFFECTIVE
; ADDRESS SPECIFICATION, E.G. FOO, @FIE(X). NOTE THAT THIS
; ADDRESS WILL BE COMPUTED BY AN XMOVEI AT THE TIME OF THE CALL
; SO SECTION INFORMATION WILL BE BOUND AT THAT TIME. NOTE ALSO
; THAT THIS FORM SHOULD *NOT* BE USED FOR A LITERAL CONSTANT
; WHERE YOU WOULD NOT WANT THE CURRENT SECTION PUT IN THE LEFT
; HALF. USE [CONST] INSTEAD. YES, THE DOT HERE IS LIKE NO-DOT IN BLISS
; AND VICE-VERSA.
; 3. A STRUCTURE REFERENCE SPECIFICATION, E.G. AAA, <BB,(X)>. IF
; THE LATTER FORM IS USED, THE BRACKETS ARE REQUIRED.
DEFINE BCALL. (NAME,ARGS)<
..NA==0 ;;INIT ARG COUNT
IRP ARGS,<
.BCAL2 ARGS> ;;COMPILE PUSH
PUSHJ P,NAME ;;JUMP TO SUBR
ADJSP P,-..NA ;;REMOVE ARGS FROM STACK
>
;SEPARATE PAIRED ARGS
DEFINE .BCAL2 (ARGS)<
.BCAL1 ARGS>
DEFINE .BCAL1 (ARG1,ARG2)<
IFIDN <ARG1><.>,<
XMOVEI .SAC,ARG2 ;;IMMEDIATE ARG
PUSH P,.SAC
>
IFDIF <ARG1><.>,<
.IFATM <ARG1>,.BLF4 ;;SEE IF ARG IS ATOMIC
.BLF1==0 ;;SET TO 1 WHEN WE ASSEMBLE SOMETHING
IFN .BLF4,< ;;SEE IF A STRUCTURE REF
.IF %'ARG1,MACRO,< ;;CHECK RELATED STRUCTURE SYMBOL
.BLF1==1> ;;IS A STRUCTURE
>
IFNB <ARG2>,<
.BLF1==1> ;;SECOND ARG IMPLIES STRUCTURE TOO
IFN .BLF1,< ;;'OR' OF ABOVE TWO CHECKS
LOAD .SAC,ARG1,ARG2
PUSH P,.SAC
>
IFE .BLF1,< ;IF WASN'T A STRUCTURE REF,
IFN .BLF4,< ;;IF ARG IS ATOMIC...
.BLF2==<<Z ARG1>&17B17>-<P>B17 ;;TRY TO GET VALUE
.IF .BLF2,ABSOLUTE,< ;;IF WE NOW HAVE THE VALUE
IFE .BLF2,< ;;SEE IF INDEXED BY P
.BLF1==1 ;;NOTE WE DID SOMETHING
.BLF3==<Z ARG1>&777777
PUSH P,.BLF3-..NA(P)>>>> ;;YES, MUST ADJUST BY PUSHES SO FAR
IFE .BLF1,< ;;ELSE...
PUSH P,ARG1>> ;;PUSH ONE ARG
..NA=..NA+1>
;MACRO TO SEE IF STRING IS AN ATOM, I.E. CONTAINS ONLY LEGAL SYMBOL
;CONSTITUENTS A-Z, 0-9, %, $, .
;IT IS PAINFULLY SLOW, BUT MACRO PROVIDES NO OTHER WAY
;FLAG WILL BE SET TO 1 IF STRING IS ATOM, 0 OTHERWISE
DEFINE .IFATM (S,FLG)<
IRPC S,<
FLG==0
IFGE "S"-"A",<IFLE "S"-"Z",<FLG=1>> ;;SET FLG IF LETTER OK
IFGE "S"-"0",<IFLE "S"-"9",<FLG=1>>
IFE "S"-"%",<FLG=1>
IFE "S"-"$",<FLG=1>
IFE "S"-".",<FLG=1>
IFE FLG,<STOPI>>>
SUBTTL $BGINT,$DEBRK - Interrupt context switching
;At the beginning of each interrupt level routine, the first instruction
; is a $BGINT, with the address field indicating which priority level
; this interrupt is on. When the interrupt is over, the $DEBRK instruction
; is used, which resumes non-interrupt level context and dismisses the
; interrupt. Interrupt context gives all ACs and a new Stack for use.
;Establish interrupt level context
DEFINE $BGINT(LVL)<
IFG LVL-INT.LV,<PRINTX ?Level LVL interrupts not supported>
.BGINT.(\LVL) > ;;END OF $BGINT DEFINITION
DEFINE .BGINT.(A)<$CALL I%INT'A>
;Return to normal (non-interrupt) level
DEFINE $DEBRK<
$RET ;WILL INVOKE RIGHT ROUTINE
> ;END OF $DEBRK DEFINITION
SUBTTL $BUILD,$SET,$EOB - Build pre-formed data blocks
;Many components have a need to build simple and complex blocks which
; contain pre-formatted data, such as FOBs,IBs and other blocks
; which are made up of several words, each containing from 1 to several
; fields. Since data structures change, these blocks should not be
; just created using EXP or whatever. These macros will take values
; and install them in the right field and word of a structure.
; Start off a structure, argument is the size of the structure.
DEFINE $BUILD(SIZE)<
IFDEF ..BSIZ,<PRINTX ?Missing $EOB after a $BUILD>
..BSIZ==0 ;;START COUNTER
..BLOC==. ;;REMEMBER OUR STARTING ADDRESS
REPEAT SIZE,< ;;FOR EACH WORD IN THE BLOCK
BLD0.(\..BSIZ,0) ;;ZERO OUT IT'S ACCUMULATOR
..BSIZ==..BSIZ+1> ;;AND STEP TO NEXT
>;END OF $BUILD DEFINITION
; For each value installed somewhere in the structure, set it into the block
; Arguments are word offset,field in word (optional) and value to set.
DEFINE $SET(OFFSET,STR,VALUE),<
IFNDEF ..BSIZ,<PRINTX ?$SET without previous $BUILD>
IFNB <STR>,<..STR0 (..SET,<VALUE>,STR,OFFSET)>
IFB <STR>,<..STR0 (..SET,<VALUE>,FWMASK,OFFSET)>
> ; END OF $SET DEFINITION
DEFINE ..SET (VALUE,LOC,MSK) <
IFGE <<<LOC>&777777>-..BSIZ>,<
PRINTX ?WORD offset greater than $BUILD size parameter>
SET0. (\<LOC>,MSK,<VALUE>)
> ;END ..SET DEFINITION
; After all values are declared, the block must be closed to do its actual
; creation.
DEFINE $EOB,<
IFNDEF ..BSIZ,<PRINTX ?$EOB without previous $BUILD>
IFN <.-..BLOC>,<PRINTX ?Address change between $BUILD and $EOB>
LSTOF. ;;DON'T SHOW THE BLOCK
..T==0
REPEAT ..BSIZ,<
BLD0.(\..T,1) ;;STORE EACH WORD
..T==..T+1 >
PURGE ..BSIZ,..T,..BLOC ;;REMOVE SYMBOLS
LSTON.
>; END OF $EOB DEFINITION
DEFINE BLD0.(N,WHAT),<
IFE WHAT,<..T'N==0>
IFN WHAT,<EXP ..T'N
PURGE ..T'N>
> ;END OF BLD0. DEFINITION
DEFINE SET0.(LOC,MSK,VALUE),<
IFN <<..T'LOC>&MSK>,<PRINTX ?Initial field not zero in $SET>
..TVAL==<VALUE>
..TMSK==<MSK>
..T'LOC==..T'LOC!<FLD(..TVAL,..TMSK)>
PURGE ..TVAL,..TMSK
>;END OF SET0. DEFINITION
SUBTTL $CALL,$RETT,$RETF,$RETE,$RET Uniform Call/Return Mechanisms
; All routines which follow GALAXY Conventions should call
; library routines and internal routines which return TRUE/FALSE
; values with the $CALL Macro. This provides a uniform calling
; mechanism.
; All routines which follow GALAXY conventions should return
; via one of the return instructions. These instructions set the contents
; of the true/false register, TF and then return via POPJ P,.
; If a routine wishes to merely pass on the value of the TF register
; it should return using a $RET
OPDEF $CALL [PUSHJ P,0]
.NODDT $CALL
; $RETE is the instruction used to return FALSE from a routine and also
; set a specific error code in the first status register, S1. The argument
; provided to the instruction is a 3 letter GLXLIB canonical error code.
; The effect of the $RETE instruction is to place the value of the
; GLXLIB error code into S1, place FALSE into TF and return via POPJ.
DEFINE $RETE (COD) <
$CALL .RETE ;;CALL THE ERROR ROUTINE
LSTOF.
JUMP ER'COD'$
LSTON.> ;;END OF $RETE DEFINITION
;$RETT is the instruction used to place a value of TRUE into the TF register
; and return from the routine. This instruction is used when a routine
; wishes to indicate to its caller that it is returning successfully.
; $RETT is defined during the PROLOG macro
; OPDEF $RETT [PJRST .RETT]
;$RETF is the instruction used to place a value of FALSE into the TF register
; and return from the routine. This instruction is used when a routine
; wishes to indicate to its caller that is returning unsuccessfully.
; $RETF is defined during the PROLOG macro
; OPDEF $RETF [PJRST .RETF]
;$RET is the instruction used to return the last value of TF to the caller
; OPDEF $RET [POPJ P,] ;;RETURN CURRENT VALUE OF TF
;$RETIF is the instruction used to RETurn If True
;$RETIT is the instruction used to RETurn If False
; These Pseudo-ops are defined in the PROLOG macro
; OPDEF $RETIT [JUMPT .POPJ]
; OPDEF $RETIF [JUMPF .POPJ]
SUBTTL $GDATA Macro - Runtime System Data Area control
;This macro is used to define impure storage areas. The actual
;areas are created at run-time by the memory manager. The first argument
; is the name of the word(s) to be allocated. This name may be referenced
; as any other labelled location. The second argument is the number of
; words to allocate. If omitted, this defaults to 1.
;In order to facilitate debugging of new library routines, the $DATA and
; $GDATA macros produce BLOCK pseudo-op type locations when used
; in a module whose PROLOG indicates it is not part of the library.
; This means that a new library module may be loaded with a test program
; as a non-library piece of code while it is being debugged.
; $GDATA is exactly like $DATA, except that the location defined
; is GLOBAL, that is, available to other programs.
DEFINE $GDATA(NAM,SIZ<1>)<
INTERN NAM
$DATA(NAM,<SIZ>)
> ;END OF $GDATA DEFINITION
SUBTTL $FATAL, and $WARN Macro definitions
;$FATAL is provided as a short form STOP code. It should
;be used when it is impossible to proceed because
;the program doesn't have proper priviledges or can't find a required
;file -- or any other occassion where the full stopcode information
;is irrelevant or misleading
;CALL $FATAL <any valid $TEXT string argument>
;
DEFINE $FATAL (STRING) <
$CALL .STOP
LSTOF.
JUMP [XWD 0,[ITEXT (<STRING>)]
EXP %%.MOD]
LSTON. > ;END OF $FATAL DEFINITION
;$WARN May be used when it is desired to issue a warning on the
;users terminal.
;CALL $WARN <any valid $TEXT string argument>
;
DEFINE $WARN (STRING) <
IFE %%.OTS,<DEFINE $WARN (MSG) <
$TEXT (T%TTY,<% ^W6/[%%.MOD]/ MSG>)>>
IFN %%.OTS,<DEFINE $WARN (MSG) <
$TEXT (T%TTY,<% ^W6/IIB+IB.PRG/ ^W/[%%.MOD]/ MSG>)>>
$WARN <STRING>> ;END OF $WARN DEFINITION
SUBTTL STOPCD -- GLXLIB stopcode macro
; Macro to define a call to the new stopcode processor in
; GLXLIB. This macro and the supporting code in the library
; will completely supercede the existing stopcode facilities
; in GLXLIB. The old macro and code will remain around for
; the sake of old programs, but it is expected that all new
; code written will use the new macro.
;
; For each STOPCD there is a unique label made, using the 3
; letter code provided. The label is 'S..xxx' where the xxx
; is the 3 letter code. This label is declared global, to
; insure unique STOP CODE names.
;
; The macro call is:
;
; STOPCD (NAME,TYPE,ADDR,TEXT)
;
; Where NAME A unique 3-character abbreviation
; TYPE The class of stopcode; HALT, CONT, DEBUG
; ADDR A continuation address
; TEXT Text associated with the stopcode
;
; For example, STOPCD (NFP,HALT,,<No free pages>) will expand to
;
; S..NFP::PUSHJ P,.DIE
; CAI 0,[<SIXBIT/NAME/>&<-1,,0>
; EXP %%.MOD
; EXP ADDR
; EXP [ASCIZ /TEXT/]]
DEFINE STOPCD (NAME,TYPE,ADDR,TEXT),<
.TYPE==-1 ;;ASSUME UNKNOWN STOPCODE TYPE
IFIDN <TYPE><HALT>,<.TYPE==0> ;;HALT JOB
IFIDN <TYPE><CONT>,<.TYPE==1> ;;CONTINUE AFTER SNAPSHOT
IFIDN <TYPE><DEBUG>,<.TYPE==2> ;;DEBUG (ENTER DDT)
IFL .TYPE,< ;;CHECK FOR CODING ERRORS
IF2,<PRINTX ? Stopcode 'NAME is in error; see S..'NAME in CREF>
S..'NAME::JRST 4,. ;;HALT SO WILL FIND THE BAD STOPCODE
> ;;END OF IFL .TYPE CONDITIONAL
IFB <NAME>,< ;;CHECK FOR BLANK STOPCODE NAMES
IF2,<PRINTX ? Stopcode with out a name; see S.. in CREF>
S..:: JRST 4,. ;;HALT SO WILL FIND THE BAD STOPCODE
> ;;END OF IFB NAME CONDITIONAL
IFGE .TYPE,< ;;IF A KNOWN STOPCODE TYPE
S..'NAME::PUSHJ P,.DIE ;;CALL THE STOPCODE PROCESSOR
CAI .TYPE,[ ;;POINT TO STOPCODE ARGUMENTS
<SIXBIT /NAME/>&777777000000 ;;MNEMONIC,,0 (RH IS RESERVED)
EXP %%.MOD ;;MODULE NAME
EXP ADDR ;;SET CONTINUE ADDRESS
EXP [ASCIZ |TEXT|] ;;INFORMATIVE TEXT
] ;;END OF LITERAL
> ;;END OF IFN .TYPE CONDITIONAL
PURGE .TYPE ;;DELETE UNNEEDED SYMBOLS
> ;;END OF STOPCD MACRO
SUBTTL $STOP - Old stopcode macro
; The $STOP macro remaings only for compatibility with old programs
; or lazy programmers. New programs or ambitious programmers should
; convert to the new STOPCD macro. As an incentive, the $STOP macro
; will PRINTX a warning message when one is expanded.
DEFINE $STOP (CODE,STRING),<
IF1,<PRINTX % Use STOPCD macro for stopcode 'CODE instead of $STOP>
S..'CODE::! $CALL .STOP
LSTOF.
JUMP [XWD ''CODE'',[ITEXT (<STRING>)]
EXP %%.MOD]
LSTON. > ;END OF $STOP DEFINITION
SUBTTL $TEXT - Interface to the T%TEXT routine
; The $TEXT macro is used to do all formatted ASCII output involving
; strings and/or variables. The macro takes two arguments.
; The first argument is the address of a routine to call when T%TEXT
; actually has a single right justified 7 bit ASCII character to output
; from its arguments. The specified routine will be called with the
; character in S1 and should return TRUE or FALSE in S1. A value of
; FALSE will cause a STOP CODE to occur.
; If the first argument is null, i.e. left blank, then a default
; routine will be called, specified at initialization.
; If the first argument is <-1,,ADDR>, it is a IDPB style byte pointer
; for GLXTXT to store bytes into.
; The second argument is a text string containing characters to output
; and imbedded argument specifiers for substitutable parameters to be
; merged with constant data.
; If no specifier precedes a string in the second argument, it is
; assumed to be straight string data to be passed to the output routine
; directly. On the other hand, substitutable parameters are described
; by: ^<QUALIFIER>[OPT. SPACING]/<ADDRESS-OF-VARIABLE>[OPTIONAL <,MASK>]/
; Where the qualifier is one of the recognized single letter argument
; types (See next page), and the address and optional mask are two
; 36 bit quantities, such as might be passed to LOAD/STORE. These
; addresses can contain indexing and/or indirection ,may point to
; the accumulators or the stack.
; Each $TEXT instruction normally ends in a "free" carriage return
; line feed sequence. That is, each $TEXT instruction produces one
; line of output. However, through use of the qualifiers 0,A,M,J,K and L,
; output can be formatted to produce multiple lines via a single $TEXT
; or one line via multiple $TEXTS. ^0 gives a null (0) terminator in place of CRLF.
; NOTE: The $TEXT macro is a pseudo-instruction, and as such, it may be skipped
; over to avoid its execution. Also, all accumulators are guaranteed
; preserved .
; Example:
; $TEXT(PUTCHR,<This is your PPN: ^P/MYPPN/ for today.>)
; 1. Prints (using the routine PUTCHR for output) the string,
; "This is your PPN: "
; 2. Prints the contents of location MYPPN as a TOPS-10 PPN.
; 3. Prints the string " for today."
; 4. Prints a <CRLF> to produce the end of the line.
; Example:
; $TEXT(<-1,,LINBUF>,<File ^D/FB%STS(P1),FBS%FN/ is named ^F/@S1/^A>)
; 1. Prints the string "File ", depositing chars into the user buffer LINBUF
; 2. Prints the "loaded" contents of FB%STS(P1),FBS%FN as
; a decimal number
; 3. Prints the string " is named "
; 4. Prints the contents of the FD pointed to by AC S1 as
; a file specification.
; 5. Does not produce a <CRLF> sequence, since the ^A qualifier
; specifies that we supress it.
; Optionally, any output field may be right or left justified or
; centered. The information used to do this appears between the
; qualifier symbol and the slash which starts the address of the
; field to be output. The justification information consists of
; three parts, two of which are optional. The first piece of the
; justification information is the width of the field. This is given
; in Radix 10. and can be any number greater than zero. The second
; piece is a one letter code telling the Text processor which type
; of justification to use. This can be "L" for left justification,
; "R" for right justification or "C" for centering. If this field
; is omitted, the default is right justification for numeric items
; (I.E. ^O and ^D), and left justification for all other types.
; The third, optional, part is a single character which will be the
; character used to do any padding necessary for the justification.
; If the character is given, the justification code must be given also.
; If the padding character is omitted, it defaults to blanks.
; Example:
; $TEXT(PUTCHR,<^D10L*/S1/ ^F30/@FILSPC/ ^T40C/FOO(S2)>)
; 1. Prints the decimal number in S1, in a field of 10. characters.
; The number will be left justified, the remainder of the
; field will be filled with the character "*".
; 2. After printing one space, the file specification pointed
; to by location FILSPC will be printed in a 30 character
; field. The justification defaults to left justification,
; and the fill character is a space.
; 3. After printing another space, the ASCIZ string starting
; at location FOO(S2) will be printed in a 40 character
; field. The resulting output will be centered in the field
; and filled with blanks as necessary.
;
; NOTE: If output overflows a field, then no justification is done.
;
; The actual $TEXT macro
DEFINE $TEXT (ADR,STRING) <
$CALL T%TEXT
LSTOF. XCREF
JUMP [XWD 2,0
EVL (ADR)
ITEXT(<STRING>)] ;;Parse the string
LSTON.>
DEFINE EVL (A,B,C) <
IFIDN <B'C><>,<EXP <A>>
IFDIF <B'C><>,<
IFE <A+1>,<<POINT 7,'C>>
IFN <A+1>,<
IFIDN <C><>,<EXP <A,B>>
IFDIF <C><>,<EXP <A,B,C>>
>>>
DEFINE ITEXT (STRING) <
LSTOF. XCREF
..TEXT<STRING> ;;EXPAND IT
EXP 0 ;;TERMINATE WITH A ZERO WORD
LSTON.
> ;;End DEFINE ITEXT
; Define legal qualifers for argument types
;
; CHR This is the character which will invoke the function
; when seen in a text string
; TYPE This is the type used in the $TQ macro to invoke the
; function
; ARGS This field identifies which arguments are valid for
; the function. The following values may be specified:
; 0 Function accepts no arguments
; 1 Function accepts only address and field mask
; 2 Function accepts all arguments
; PROC This is the name of the macro processor which will be called
; when the qualifier is encountered.
; Remember to add new qualifiers to the end, in order to keep older
; programs working.
DEFINE TQUALS,<
LSTOF.
TQ(T,2,ASCIZ) ;;ASCIZ STRING
TQ(O,2,OCTAL) ;;UNSIGNED OCTAL NUMBER
TQ(D,2,DECIMAL) ;;DECIMAL NUMBER
TQ(F,2,FILE) ;;FILE SPECIFICATION
TQ(7,2,CSEVEN) ;;ONE RIGHT JUSTIFIED 7 BIT CHARACTER
TQ(6,2,CSIXBIT) ;;ONE RIGHT JUSTIFIED 6 BIT, CHARACTER
TQ(W,2,SIXBIT) ;;SIXBIT WORD
TQ(5,2,SVNBIT) ;;ASCIZ, ONLY 1 WORD
TQ(P,2,USER) ;;PPN OR DIRECTORY NUMBER
TQ(U,2,DIRECTORY) ;;PPN OR USER NUMBER
TQ(H,2,DAYTIME) ;;UDT TO BE TYPED AS DD-MON-YY HH:MM:SS
TQ(C,2,TIME) ;;TIME FROM UDT TO BE TYPED AS HH:MM:SS
TQ(E,2,ERROR) ;;TYPE OUT STRING FOR ERxxx$ ERROR CODE
TQ(I,1,INDIRECT) ;;POINTER TO ITEXT (INDIRECT TEXT) BLOCK
TQ(M,0,CR,..TXC0(\".CHCRT)) ;;TYPE ^M (CARRIAGE RETURN)
TQ(J,0,LF,..TXC0(\".CHLFD)) ;;TYPE ^J (LINE-FEED)
TQ(L,0,FF,..TXC0(\".CHFFD)) ;;TYPE ^L (FORM FEED)
TQ(K,0,VT,..TXC0(\".CHVTB)) ;;TYPE ^K (VERTICAL TAB)
TQ(A,0,NOCRLF,..TXA(.TQCHA)) ;;(APPEND) SUPPRRESS FREE CRLF
TQ(0,0,NULL,..TXA(.TQCH0)) ;;NUL CHAR INSTEAD OF CR-LF AT END
TQ(3,0,STRING,..TXER(IQU)) ;;INTERNAL STRING
TQ(V,2,VERSION) ;;PROGRAM VERSION NUMBER
TQ(2,0,CARET,..TXER(IQU)) ;;INTERNAL UP-ARROR
TQ(Q,2,POINTER) ;;BYTE POINTER TO ASCIZ STRING
TQ(B,2,ROB) ;;OBJECT BLOCK
TQ(1,2,OBJECT) ;;OBJECT TYPE
TQ(N,2,NODE) ;;TYPE A NODE NAME/NUMBER
TQ(R,2,JIB) ;;TYPE OUT JOB INFO BLOCK (JIB)
LSTON.
> ;END OF TQUALS DEFINITION
;DEFINE TWO SYMBOLS OF THE FORM .TQxxx AND .TQCHx WHICH
;IDENTIFY THE VALID QUALIFIERS AND THE ARGUMENTS WHICH ARE
;VALID FOR EACH. THE RIGHT HALF OF THE SYMBOL IS THE QUALIFIER
;INDEX AND THE LEFT HALF WILL CONTAIN A 0,1 OR 2 TO INDICATE WHICH
;ARGUMENTS ARE ALLOWED.
DEFINE TQ(CHR,ARGS,TYP,PROC) <
IFNB <CHR>,<.TQCH'CHR==^D<ARGS>B17+ZZ>
IFNB <PROC>,<DEFINE ..TQM'CHR<PROC>>
IFNB <TYP>,<.TQ'TYP==^D<ARGS>B17+ZZ>
ZZ==ZZ+1>
ZZ==1 ;FIRST QUALIFIER IS 1
TQUALS ;DEFINE THE CODES
;DEFINE THE FIELDS IN THE TEXT ARGUMENT BLOCK USED FOR EACH ARG
.TXTFL==0 ;TEXT ARGUMENT FLAG WORD
TXT.NA==1B0 ;FUNCTION HAS NO ARGUMENTS
TXT.FN==77B8 ;TEXT FUNCTION CODE
TXT.AD==1B9 ;ADDRESS WORD IS PRESENT
TXT.IM==1B10 ;ADDRESS IS THE ARGUMENT (RESERVED)
TXT.JU==3B12 ;ARGUMENT JUSTIFICATION CODE
.TXTJL==1 ;JUSTIFY LEFT
.TXTJR==2 ;JUSTIFY RIGHT
.TXTJC==3 ;JUSTIFY CENTER
TXT.WD==377B23 ;WIDTH OF FIELD
TXT.FC==377B35 ;FILL CHARACTER
.TXTAD==1 ;TEXT ARGUMENT ADDRESS WORD
TXT.PT==7777B11 ;POINTER PORTION OF ADDRESS
TXT.XA==1B12 ;EXTENDED ADDRESS (RESERVED)
TXT.EA==37777777B35 ;ADDRESS PORTION
;OBSOLETE DEFINITIONS FOR FLAG WORD
TXT.P==1B1 ;POINTER WORD IS PRESENT (OBSOLETE)
TXT.S==1B2 ;SPACING WORD IS PRESENT (OBSOLETE)
TXT.M==77B8 ;MASK TO QUALIFIER PART
;OBSOLETE DEFINITIONS FOR OPTIONAL SPACING WORD
TXT.SC==177B6 ;MASK TO GET CHARACTER FOR SPACING
TXT.SS==3B17 ;MASK TO GET SIDE FOR SPACING
TXT.SL==1 ;CODE TO SPACE LEFT
TXT.SR==2 ;CODE TO SPACE RIGHT
TXT.SM==3 ;CODE TO SPACE MIDDLE (CENTER)
TXT.SP==777777 ;MASK TO GET POSITIONS FOR SPACING
SUBTTL $TQ MACRO DEFINITION
;THE $TQ MACRO ALLOWS TEXT ARGUMENT BLOCKS TO BE BUILD WITHOUT
;REQUIRING CHARACTER BY CHARACTER PARSING OF THE TEXT STRING
DEFINE $TQ(TYP,ADR,WID,JUS,FIL) <
..TXA(.TQ'TYP,WID,JUS,FIL,ADR) ;;CALL THE WORK MACRO
IFN ..TXEF,< ;;REPORT ANY ERRORS
..TERR<$TQ(TYP,ADR,WID,JUS,FIL)>>
> ;END OF $TQ DEFINITION
;THE ..TXA MACRO BUILDS A STANDARD ITEXT ARGUMENT BLOCK AND
;ESTABLISHES THE DEFAULT JUSTIFICATION AND FILL IF NONE WAS
;SPECIFIED. THIS MACRO IS CALLED BY THE $TQ MACRO AND BY THE
;TEXT PARSING MACROS WHEN AN ARGUMENT HAS BEEN ASSEMBLED
DEFINE ..TXA(TYP,WID,JUS,FIL,ADR,STR) <
..TXEF==0 ;;CLEAR THE ERROR FLAGS
IFNDEF TYP,<..TXER(UQU)> ;;QUALIFIER MUST BE DEFINED
IFDIF <WID><>,<IRPC WID,<.IFN <WID>,NUMERIC,..TXER(IWA)>>
IFNB <JUS>,<IFNDEF .TXTJ'JUS,<..TXER(IJA)>>
IFDEF TYP,<
IFE <TYP_-^D18>,<IFDIF <ADR'STR'WID'JUS'FIL><>,<..TXER(ANA)>>
IFE <1-<TYP_-^D18>>,<IFDIF <WID'JUS'FIL><>,<..TXER(JNA)>>
IFE <2-<TYP_-^D18>>,<IFIDN <ADR'STR><>,<..TXER(ADS)>>>
IFE ..TXEF,<
IFIDN <WID><>,<..TXWD==<..TXJU==<..TXFC==0>>>
IFDIF <WID><>,<
IFE <^D<WID>>,<..TXWD==<..TXJU==<..TXFC==0>>>
IFN <^D<WID>>,<..TXWD==^D<WID>
IFNB <JUS>,<..TXJU==.TXTJ'JUS>
IFB <JUS>,<..TXJU==.TXTJL
IFE <TYP-.TQOCT>,<..TXJU==.TXTJR>
IFE <TYP-.TQDEC>,<..TXJU==.TXTJR>>
IFB <FIL>,<..TXFC==" ">
IFNB <FIL>,<..TXFC=="FIL">>>
IFB <ADR'STR>,<..TXPT==0>
IFNB <ADR'STR>,<..TXPT==1>
IFE <..TXWD+..TXPT>,<
EXP FLD(TYP,TXT.FN)>
IFN <..TXWD+..TXPT>,<
EXP FLD(TYP,TXT.FN)+FLD(..TXJU,TXT.JU)+FLD(..TXWD,TXT.WD)+FLD(..TXFC,TXT.FC)+TXT.AD
PNTR(ADR,STR)>>
> ;END OF ..TXA MACRO DEFINITION
;THE PNTR MACRO ACCEPTS A STRUCTURE OR ADDRESS MASK DEFINITION
;AND CREATES A BYTE POINTER TO THEARGUMENT.
;IF THE ARGUMENT IS A FULLWORD, THE POINTER POSITION IS 0.
DEFINE PNTR(Y,STR) <
IFB <STR>,<..STR0(..PNT,,<FWMASK>,Y)>
IFNB <STR>,<..STR0(..PNT,,<STR>,Y)>>
DEFINE ..PNT(AC,LOC,MSK)<
..PST==MSK-FWMASK
.IF0 ..PST,<
POINT 0,LOC,35>,<
POINTR (LOC,MSK)>>
SUBTTL Error processing and messages
DEFINE $TX$ERR,<
LSTOF.
X(UQU,Unknown qualifier)
X(IQU,Invalid qualifier)
X(IJA,Invalid justification argument)
X(IWA,Invalid width argument)
X(PEA,Premature end of argument)
X(JNA,Justification is not allowed)
X(ANA,Arguments are not allowed)
X(ADS,Address must be specified)
LSTON.
> ;End of $TX$ERR definition
;Assign a bit symbol for each error
DEFINE X(NAM,STRING) <
..X'NAM==1B<ZZ>
ZZ==ZZ+1>
ZZ==0
$TX$ERR ;;EQUATE THE SYMBOLS
;DEFINE A MACRO TO DISPLAY THE COMPILE TIME DIAGNOSTIC FOR ERRORS
DEFINE ..TERR(TEXT) <
IF1,<
PRINTX ? Error in "TEXT"
DEFINE X(NAM,ERR) <IFN ..X'NAM&..TXEF,<PRINTX ? ERR>>
$TX$ERR>
> ;End ..TERR definition
;HERE WHEN AN ERROR IS DETECTED. THIS ROUTINE REMEMBERS THE
;ERROR IN THE ERROR REGISTER ..TXF AND CAUSES RETURN TO TOP
;THE TOP LEVEL PARSING ROUTINES.
DEFINE ..TXER(E) <
..TXEF==..TXEF!..X'E ;;SET THE ERROR FLAG
..TXF==0 ;;BACK TO TOP LEVEL
..TXB=="^"> ;;ESTABLISH BREAK
SUBTTL ..TEXT PARSING MACRO DEFINITION
DEFINE ..TEXT (C) <
..TXF==0 ;;SET TOP PROCESSING LEVEL
..TXB==0 ;;CLEAR THE BREAK CHARACTER
..TXP==0 ;;CLEAR TEXT PROCESSING FLAG
..TXEG==<..TXEF==0> ;;CLEAR ERROR REGISTERS
IRPC C,< ;;PARSE THE STRING
..TXC==ASCII\C\_-35 ;;GET CHARACTER VALUE
IFN ..TXB,<IFN ..TXB-..TXC,..CNS(<C>)
IFE ..TXB-..TXC,..TXB==0>
IFE ..TXB,<..TXQ(<C>,\..TXF)>> ;;CALL PROPER PROCESSOR
..TXC1 ;;TERMINATE TEXT IF ANY
IFN ..TXB,<IFN <..TXB-"^">,<..TXER(PEA)>>
..TXEF==..TXEF!..TXEG ;;GET ANY ERRORS
IFN ..TXEF,<..TERR<C>>
> ;END OF ..TEXT
;;HERE WHEN BREAK CHARACTER IS NOT SET TO DISPATCH TO
;APPROPRIATE PROCESSOR
DEFINE ..TXQ(C,P) <..TXQ'P(<C>)>
;HERE FOR THE VERY FIRST CHARACTER AND FOR EACH CHARACTER
;FOLLOWING THE COLLECTION OF A VALID ARGUMENT
DEFINE ..TXQ0(C) <
IFN ..TXC-"^",<..TXC0(<C>)> ;;STORE AND INIT TEXT
IFE ..TXC-"^",<..TXF==1>> ;;UNLESS WE HAVE "^"
;;HERE TO PROCESS THE QUALIFIER
;;MAKE SURE WE HAVE A VALID QUALIFER AND DO SPECIAL CASE
;;CHECK TO ALLOW A QUOTED "^".
;;SETS THE NEXT FUNCTION TO PROCESS WIDTH IF QUALIFIER
;;ACCEPTS ANY ARGUMENTS ELSE FORCES RETURN TO TOP LEVEL.
DEFINE ..TXQ1(C) <
IFE ..TXC-"^",<..TXC0(<C>)> ;;STORE IF SPECIAL CHARACTER
IFN ..TXF,< ;;ELSE
..TXF==0 ;;ASSUME TOP LEVEL
IFDEF .TQCH'C,< ;;IF QUALIFIER IS VALID
IFDEF ..TQM'C,..TQM'C ;;EXECUTE MACRO IF DEFINED
IFN <.TQCH'C_-^D18>,<..TXF==2>>>
IFE ..TXF-2,<..TXC1(<C>) ;;CLOSE CURRENT TEXT STRING
..ICNS ;;CLEAR ACCUMULATED TEXT
..CNS<..TXA(.TQCH'C,>> ;;SET STRING TO CALL ..TXA MACRO
..TXEG==..TXEG!..TXEF> ;;REMEMBER ANY ERRORS
;HERE TO PROCESS WIDTH
;THIS MACRO APPENDS ALL NUMERIC CHARACTERS TO THE STRING WHICH
;IS BEING ACCUMULATED. WHEN THE FIRST NON NUMERIC IS ENCOUNTERED
;THE JUSTIFICATION PROCESSOR IS CALLED.
DEFINE ..TXQ2(C) <
..TXF==3 ;;ASSUME JUSTIFICATION
IFGE ..TXC-"0",IFLE ..TXC-"9",<..TXF==2>;;UNLESS ARGUMENT IS NUMERIC
IFE ..TXF-2,<..CNS(C)> ;;APPEND NUMERIC ARGUMENT
IFE ..TXF-3,<..CNS<,> ;;ELSE CLOSE WIDTH
..TXQ3(C)>> ;;AND PROCESS JUSTIFICATION
;HERE TO PROCESS JUSTIFICATION
;STORE JUSTIFICATION ARGUMENT AND SETUP TO PROCESS FILL CHARACTER
;OR PROCESS FIRST ADDRESS DELIMITER
DEFINE ..TXQ3(C) <
..TXF==4 ;;ASSUME NEXT ARG IS FILL
IFE ..TXC-"/",<..TXF==5> ;;UNLESS FIRST SLASH
IFE ..TXC-"[",<..TXF==5> ;;OR ADDRESS DELIMITER
IFE ..TXF-4,<..CNS<C,>> ;;STORE JUSTIFICATION ARG
IFE ..TXF-5,<..CNS<,,> ;;OR CLOSE JUSTIF AND FILL
..TXQ5(C)>> ;;AND PROCESS DELIMITER
;HERE TO PROCESS FILL CHARACTER
;IF CHARACTER IS NOT ADDRESS DELIMITER WE STORE IT AS THE FILL
;CHARACTER AND SETUP TO PROCESS A SLASH. IF THE ARGUMENT IS
;A DELIMITER WE CLOSE THE FILL CHARACTER ARGUMENT AND PROCESS
;IT.
DEFINE ..TXQ4(C) <
..TXF==4 ;;ASSUME WE HAVE FILL CHARACTER
IFE ..TXC-"/",..TXF==5 ;;UNLESS IT IS ADDRESS
IFE ..TXC-"[",..TXF==5 ;;DELIMITER
IFE ..TXF-5,<..CNS<,> ;;ELSE CLOSE FILL ARGUMENT
..TXQ5<C>> ;;AND PROCESS DELIMITER
IFE ..TXF-4,<..CNS<C,> ;;STORE FILL CHARACTER
..TXF==5>> ;;SET TO PROCESS DELIMITER
;HERE TO PROCESS FIRST ADDRESS DELIMITER
;HERE WE SET OUR NEXT FUNCTION TO PROCESS FINAL DELIMITER
DEFINE ..TXQ5(C) <
..TXF==6 ;;SET NEXT FUNCTION
IFE ..TXC-"/",..TXB=="/" ;;SET FINAL BREAK CHARACTER
IFE ..TXC-"[",..TXB=="]"
IFE ..TXB-"]",..CNS<[> ;;STORE START OF LITERAL
IFE ..TXB,..TXF==5> ;;IGNORE ANY JUNK
;HERE TO PROCSS FINAL DELIMITER AND BUILD AN ARGUMENT BLOCK
DEFINE ..TXQ6(C) <
..TXF==0 ;;BACK TO TOP LEVEL
IFE ..TXC-"]",..CNS<]> ;;STORE END OF LITERAL
..CNS<)> ;;TERMINATE ARGUMENT LIST
..GCNS ;;DO THE ..TXA MACRO
..TXEG==..TXEG!..TXEF> ;;REMEMBER ANY ERRORS
SUBTTL ASCII TEXT STRING STORAGE MACRO DEFINITIONS
;HERE TO STORE A CHARACTER IN AN ASCII STRING. A CHECK IS MADE
;TO ENSURE THAT WE ARE PROCESSING ASCII TEXT.
DEFINE ..TXC0(C) <
IFE ..TXP,< ;;INITIALIZE TEXT PARSING
..ICNS ;;CLEAR ACCUMULATED STRING
..CNS<ASCIZ\> ;;START ASCIZ LITERAL
..TXP==1> ;;REMEMBER WE ARE DOING TEXT
..CNS<C> ;;APPEND THE CHARACTER
..TXF==0 ;;BACK TO TOP LEVEL
..TXB=="^"> ;;SET TOP LEVEL BREAK
;HERE TO TERMINATE TEXT PROCESSING AND BUILD TEXT ARGUMENT
DEFINE ..TXC1(C) <
IFN ..TXP,< ;;IGNORE IF NOT DOING TEXT
..CNS<\> ;;CLOSE ASCIZ LITERAL
EXP <FLD(.TQCHT,TXT.FN)+[..GCNS]>>;;BUILD THE ARGUMENT
..TXP==0> ;;CLEAR TEXT PROCESSING FLAG
SUBTTL $WTO / $WTOJ / $WTOR / $ACK Macros
COMMENT /
THE CALLING FORMAT IS:
$WTO (<Type line>,<Text line>,OBJ Blk address,Optional args)
$WTOJ (<Type line>,<Text line>,OBJ Blk address,Optional args)
$WTOR (<Type line>,<Text line>,OBJ Blk address,ACK code addr,Optional args)
$ACK (<Type line>,<Text line>,OBJ Blk address,ACK code addr,Optional args)
$LOG (<Type line>,<Text line>,OBJ Blk address,Optional args)
$KWTOR (ACK Code Addr,Optional args) ;KILL A WTOR REQUEST
ANY OR ALL OF THE PARAMETERS AND TIEIR COMBINATIONS ARE
ACCEPTABLE AS INPUT.
THE TYPE-LINE OR TEXT-LINE ARE STRUCTURED
THE SAME AS $TEXT CODE. ALL POSSIBLE COMBINATIONS OF
$TEXT AND ITEXT CODES ARE ACCEPTABLE.
The 'optional args' consist of
<arg1,arg2,...,argn> where each of the arg'i is
of the form: $WTxxx(y), where xxx is one of the
valid suffixes from the ALLWTO macro, and y is
the address of a block, or a flag bit, or some
ITEXT, depending on the meaning of xxx
/
;First, define the 'for all WTO parameters' macro
;The code types are as follows:
;0 - Takes an address
;1 - Takes an 'OR-able' flag word
;2 - Takes an ITEXT
;(It turns out that 0 and 1 are today indistinguishable during assembly)
DEFINE ALLWTO,<
.EAWTO(MTY,0)
.EAWTO(TYP,2)
.EAWTO(TXT,2)
.EAWTO(OBJ,0)
.EAWTO(ACK,0)
.EAWTO(FLG,1)
.EAWTO(NOD,0)
.EAWTO(JBN,0)
.EAWTO(ACD,0)
.EAWTO(OCD,0)
.EAWTO(MFL,1)
>;End define ALLWTO
;Then define the individual setting macros
DEFINE .EAWTO(SUFFIX,CODE),<
DEFINE $WT'SUFFIX' (ARG),<
IFB <ARG>,<.WF'SUFFIX'==0
IFN <CODE-2>,<.$W'SUFFIX'==0>>
IFNB <ARG>,<.WF'SUFFIX'==-1
IFN <CODE-2>,<.$W'SUFFIX'==.$W'SUFFIX'!<ARG>>
IFE <CODE-2>,<DEFINE .$W'SUFFIX',<<WO.'SUFFIX'>B8+[ITEXT (<ARG>)]>>
>;;End IFNB
>;;End of define $WTSUFFIX
>;End define .EAWTO
ALLWTO ;Define the $WTxxx macros
;Then define the 'RESET' macro
DEFINE $WTRST<
DEFINE .EAWTO(SUFFIX),<$WT'SUFFIX' <>>
ALLWTO ;;Reset all the $WTxxx macros
>;End define $WTRST
;Generate the op-codes for the argument block
DEFINE .EAWTO(SUFFIX),<
.OPCD==.OPCD+1
WO.'SUFFIX'==.OPCD
>;End define .EAWTO
.OPCD==0 ;Initialize the op-code counter
WO.MIN==.OPCD+1 ;Anticipate the minimum opcode
ALLWTO ;Generate the opcodes
WO.MAX==.OPCD ;Define the largest, too
PURGE .OPCD ;Flush this sym
;And define the Action routine to generate the in-line blocks
DEFINE $WTBLD<
IFE <.WFMTY>,<PRINTX ?No message type in $WTBLD>
DEFINE .EAWTO(SUFFIX,ARGCOD),<
IFN .WF'SUFFIX',<
IFE <ARGCOD-0>,<<WO.'SUFFIX'>B8+ .$W'SUFFIX'>
IFE <ARGCOD-1>,<<WO.'SUFFIX'>B8+ [EXP .$W'SUFFIX']>
IFE <ARGCOD-2>,<.$W'SUFFIX'>
>;;END IFN .WFSUFFIX
>;;End define .EAWTO
ALLWTO ;;Build each arg block, if neccessary
EXP 0 ;;Finish the arg list
>;End define $WTBLD
;Now define the most commonly used forms of these macros
DEFINE $WTO(TYPE,TEXT,OBJADR,ARGS),<.WTOX.(.OMWTO,<TYPE>,<TEXT>,<OBJADR>,,<ARGS>)>
DEFINE $WTOR(TYPE,TEXT,OBJADR,ACKADR,ARGS),<.WTOX.(.OMWTR,<TYPE>,<TEXT>,<OBJADR>,<ACKADR>,<ARGS>)>
DEFINE $ACK(TYPE,TEXT,OBJADR,ACKADR,ARGS),<.WTOX.(.OMACK,<TYPE>,<TEXT>,<OBJADR>,<ACKADR>,<$WTFLG(WT.SJI),ARGS>)>
DEFINE $WTOJ(TYPE,TEXT,OBJADR,ARGS),<.WTOX.(.OMWTO,<TYPE>,<TEXT>,<OBJADR>,,<$WTFLG(WT.JOB),ARGS>)>
DEFINE $LOG(TYPE,TEXT,OBJADR,ARGS),<.WTOX.(.OMLOG,<TYPE>,<TEXT>,<OBJADR>,,<ARGS>)>
DEFINE $KWTOR(ACKADR,ARGS),<.WTOX.(.OMWTR,,,,<ACKADR>,<$WTFLG(WT.KIL),ARGS>)>
DEFINE .WTOX.(TYP,HDR,TXT,OBJ,ACK,ARG,%LLN),<
$CALL I%WTO ;;INIT THE MSG BLKS AND LETERRIP.
LSTOF. ;;TURN OFF THE LISTING.
JRST %LLN ;;MAKE THE MACRO SKIP-ABLE.
$WTRST ;;Reset the WTO macros
IFNB <TYP>,<$WTMTY (<TYP>)> ;;Put in the message type
IFNB <HDR>,<$WTTYP (<HDR>)> ;;Add the 'type' line of text
IFNB <TXT>,<$WTTXT (<TXT>)> ;;Add the 'text' line of text
IFNB <OBJ>,<$WTOBJ (<OBJ>)> ;;And the object block address
IFNB <ACK>,<$WTACK (<ACK>)> ;;And the ack code
IRP ARG,<ARG> ;;And do all the extra stuff
$WTBLD ;;Then put in the blocks
%LLN:!
LSTON. > ;;RESUME LISTINGS
SUBTTL GALAXY system error codes
DEFINE ERRORS,<
ERR EOF,<End of file>
ERR IFP,<Illegal file position>
ERR FDE,<File data error>
ERR FND,<File is not on disk>
ERR NSD,<No such device>
ERR FCF,<File checkpoint failed>
ERR SLE,<A system limit was exceeded>
ERR IFS,<Illegal file specification>
ERR FNF,<File not found>
ERR PRT,<Protection violation>
ERR DNA,<Device not available>
ERR NCE,<No "current" entry in list>
ERR NMA,<No IPCF message is available>
ERR FDS,<Files are on different structures>
ERR FAE,<File already exists>
ERR USE,<Unexpected system error>
ERR NSP,<No such pid>
ERR BOL,<Beginning of list reached>
ERR EOL,<End of list reached>
ERR RQF,<Receivers quota full>
ERR SQF,<Senders quota full>
ERR NRE,<No remembered entry>
ERR TBF,<Table is full>
ERR EIT,<Table entry already exists>
ERR ITE,<Invalid table entry>
ERR QEF,<Quota exceeded or disk full>
ERR ARG,<Invalid argument specified>
ERR IFN,<Invalid function specified>
ERR IJN,<Invalid job number specified>
ERR RAD,<Invalid radix specified>
ERR NUM,<Invalid numeric argument>
ERR IDT,<Invalid date field specified>
ERR ITF,<Invalid time field specified>
ERR DOR,<Date/time out of range>
ERR DTM,<Value missing in date/time>
ERR MDD,<Missing day in date/time>
ERR DFZ,<Field zero in date/time>
ERR MDS,<Mnemonic date/time switch not implemented>
ERR DFL,<Field too large in date/time>
ERR ILR,<Illegal year format in date/time>
ERR NND,<Negative number in date/time>
ERR NPF,<Not known whether past or future in date/time>
ERR RDP,<Relative date parse required>
ERR NSW,<Switch does not begin with slash>
ERR NOM,<Unrecognized switch or keyword>
ERR NUL,<Null switch or keyword given>
ERR INW,<Invalid guide word>
ERR NC,<Not confirmed>
ERR ICN,<Invalid character in number>
ERR NQS,<Invalid quoted string - does not begin with quote>
ERR AMB,<Ambiguous switch or keyword>
ERR NMT,<Does not match token>
ERR CMA,<Comma not given>
ERR NNC,<Node name may not exceed 6 characters>
ERR INT,<Node terminator "::" must be specified>
ERR NSN,<Unknown node name>
ERR IPS,<Invalid path specification>
ERR IUS,<Invalid user specification>
ERR DGS,<Device name may not exceed 6 characters>
ERR DNE,<Unknown device>
ERR DIO,<Device can not do input or output>
ERR BDF,<Invalid date/time format>
ERR ABS,<Field too long for internal buffer>
ERR TMT,<Command too long for internal buffer>
ERR BDS,<Invalid default string>
ERR BTF,<Invalid table format>
ERR TME,<Date/time must be in the future>
ERR TMN,<No timer entry has expired>
ERR TMA,<Timer entry already exists>
ERR DVT,<Device terminator ":" must be specified>
ERR NCI,<Argument block may not be in the ACs>
ERR TLU,<Terminal location is unknown>
ERR FIO,<File is offline>
ERR FBM,<File being modified>
ERR WLK,<Write-locked device>
ERR CSD,<Cannot supersede a directory>
ERR CDD,<Cannot delete a non-empty directory>
ERR SNF,<Sub-file directory not found>
ERR ESL,<Search list is empty>
ERR LVL,<SFD level nested deeper than the maximum allowed>
ERR CCW,<Cannot create/write on any structure in search list>
ERR FCU,<Cannot update file>
ERR ENQ,<File has outstanding Enqueue lockes set>
ERR SWS,<Software write-lock on structure>
ERR DER,<Hardware device error>
ERR DTE,<Hard data error>
ERR BKT,<Block too large>
ERR IPP,<Non-existant UFD>
ERR TRN,<RIB or transmission error>
ERR ILC,<Illegal character in date/time>
ERR NFT,<Date/time must be in the future>
ERR NPS,<Date/time must be in the past>
ERR UDM,<Unrecognized month in date/time>
ERR UDN,<Unrecognized name in date/time>
ERR IFA,<Illegal file attribute>
ERR FAI,<File attribute inconsistancy>
ERR CEI,<Can't enable/disable interrupt system>
ERR ENF,<Linked list entry not found>
ERR NSL,<No such linked list>
ERR NFP,<No free pages>
ERR NPI,<No free pages for IPCF reception>
ERR IFB,<Indirect file too big for internal buffer> ;;[237]
ERR NDN,<Null device name given> ;;[241]
ERR PWA,<PID went away>
ERR CGP,<Can't get a PID>
ERR IND,<Invalid node name>
ERR IAC,<Invalid access string>
ERR IDV,<Invalid device name>
ERR INA,<Invalid file name>
ERR IEX,<Invalid file extension>
ERR IGN,<Invalid generation number>
ERR IDR,<Invalid directory name or PPN>
ERR NHA,<No help available>
ERR TOF,<Timeout waiting for FRCLIN>
ERR TOP,<Timeout waiting for PID>
ERR DNP,<Dependencies not present>
> ;END DEFINE ERRORS
;GENERATE THE ERROR SYMBOLS
ER%%%==1 ;DON'T USE ERROR CODE 0
DEFINE ERR(A,B),<
IF1,<IFDEF ER'A'$,PRINTX ?Duplicate error code A>
ER'A'$==ER%%%
ER%%%==ER%%%+1
> ;END DEFINE ERR
ERRORS
ERUJI$==ERIFN$ ;***Temporary***
SUBTTL Canonical File Information
;In order to bring the number of feature test switches needed to the
;absolute minimum, the GLXFIL (file handler) module makes information
;about open files available through the F%INFO routine call. The
;particular piece of information desired is designated by providing
;a canonical descriptor for that piece of information.
;These FI.xxx symbols, defined here, are the F%INFO descriptors
DEFINE CFI<
LSTOF.
X CRE ;;UDT FORMAT CREATION DATE/TIME OF FILE
X GEN ;;VERSION/GENERATION NUMBER OF FILE
X PRT ;;PROTECTION OF THE FILE
X CLS ;;CLASS OF FILE (TOPS-20) ONLY
X AUT ;;AUTHOR OF THE FILE
X USW ;;USER SETTABLE WORD
X SPL ;;SPOOL WORD (TOPS-10)
X SIZ ;;SIZE OF FILE, IN BYTES
X MOD ;;DATA MODE
X CHN ;;FILE CHANNEL # (CHN OR JFN)
X ACT ;;ACCOUNT STRING
X CRY ;;ENCRYPTION CODE
X DTY ;;DATA TYPE
X DTO ;;DATA OTS TYPE
X DCC ;;DATA CARRIAGE CONTROL
X BSZ ;;LOCAL DATA BYTE SIZE
X FSZ ;;PHYSICAL DATA FRAME SIZE
X HSZ ;;FIXED-HEADER SIZE (VARIABLE-LEN RECORDS)
X RFM ;;RECORD FORMAT
X RFO ;;RECORD FORMAT ORGANIZATION
X RSZ ;;RECORD SIZE
X BLS ;;BLOCK SIZE (BYTES)
X FFB ;;FIRST FREE BYTE WITHIN LAST BLOCK
X ACW ;;APPLICATION-SPECIFIC FIELD
X RMS ;;RMS-10 FORMATTED FILE
X MCY ;;MACY11 FORMATTED FILE
X CTG ;;CONTIGUOUS ALLOCATION
X NSB ;;RECORDS DO NO SPAN PHYSICAL BLOCKS
X ACD ;;ACCESS DATE
X MTA ;;TAPE LABEL
X STS ;;FILE STATUS BITS
X IDT ;;BACKUP INCREMENTAL DATE/TIME
X PCA ;;PRIVILEGED CUSTOMER-SETTABLE WORD
X TIM ;;PHYSICAL CREATION DATE/TIME
X LAD ;;LAST ACCOUNTING DATE
X EXP ;;EXPIRATION DATE (UDT)
LSTON.
> ;END OF CFI DEFINITION
;CREATE THE SYMBOLS
FI.%%%==0
DEFINE X(A)<
FI.'A==FI.%%%
FI.%%%==FI.%%%+1
>
CFI
SUBTTL Canonical Job Information
;In order to bring the number of feature test switches needed to the
;absolute minimum, GLXINT (Initialization) module makes information
;about jobs available through the I%JINF routine call. The
;particular piece of information desired is designated by providing
;a canonical descriptor for that piece of information.
;These JI.XXX symbols, defined here, are the I%JINF descriptors
DEFINE JBTAB<
LSTOF.
X JNO,.JIJNO,<-1,,GJBJNO> ;;JOB NUMBER
X TNO,.JITNO,<-1,,GJBTTY> ;;TERMINAL NUMBER
X USR,.JIUNO,.GTPPN ;;LOGGED IN DIRECTORY NUMBER
X CDN,.JIDNO,<-1,,GJBPTH> ;;CONNECTED DIRECTORY NUMBER
X PRG,.JIPNM,.GTPRG ;;SIXBIT PROGRAM NAME
X CJN,.JICPJ,<-1,,GJBCJB> ;;CONTROLLING JOB NUMBER (IF CONTROLLED BY PTY)
X BAT,.JIBCH,.GTOBI ;;BATCH DATA WORD..STREAM # AND WTO DATA
X JLT,.JISTM,.GTJLT ;;JOB LOGGED IN TIME
X LOC,<-1,,GJBLOC>,<-1,,GJBLOC> ;;JOB LOCATION INFORMATION
X RTM,.JIRT,<-1,,GJBRTM> ;;JOB RUNTIME IN MILLISECS
X TLC,<-1,,GJBTLC>,<-1,,GJBTLC> ;;JOBS TERMINAL LOCATION
LSTON.
> ;END OF CJI DEFINITION
;CREATE THE SYMBOLS
.ZZ==1
JI.MIN==.ZZ ;smallest accepted value
DEFINE X(A,B,C)<
JI.'A==.ZZ
.ZZ==.ZZ+1
>
JBTAB
JI.MAX==.ZZ-1 ;LARGEST ACCEPTED VALUE
SUBTTL I%TIMR Functions and argument block
.TIFNC==0 ;HEADER WORD FOR EACH TIMER ENTRY
TI.FRK==777777B17 ;FORK HANDLE (TOPS20 RESERVED)
TI.FNC==777777B35 ;TIMER FUNCTION CODE
.TIMRT==0 ;RESERVED FOR RUNTIME
.TIMEL==1 ;ADD A REQUEST TO OCCUR AFTER N MILLISECONDS
.TIMDT==2 ;ADD A REQUEST TO OCCUR AT THE SPECIFIED UDT
.TIMDD==3 ;REMOVE PENDING REQUESTS AT THE UDT
.TIMBF==4 ;REMOVE PENDING REQUESTS BEFORE THE UDT
.TIMAL==5 ;REMOVE ALL PENDING REQUESTS
.TITIM==1 ;ELAPSED TIME OR UDT AT WHICH EVENT IS TO OCCUR
.TIPSI==2 ;PSI WORD (RESERVED)
.TIMPC==3 ;USER SUPPLIED PC FOR TIMER
.TIDAT==4 ;START OF USER SUPPLIED DATA
SUBTTL Scanning and Command Module Symbols
;Define the major macro to expand X(y,z,...) for each terminal type
;Note well: the items in the TRMTYP macro MUST be in Alphabetical order
; so that TRMTYP can be used to build parse tables.
;**;[236] Added three new fields to the TRMTYP macro to include
;**;[236] a per terminal initialization routine, and escape sequences
;**;[236] to set and clear the keypad mode and clear to end of line./NT
DEFINE TRMTYP,<
LSTOF.
X(33,TTY33,33,.RETT,,,) ;;MODEL 33
X(35,TTY35,35,.RETT,,,) ;;MODEL 35
TOPS20<
X(37,TTY37,37,.RETT,,,) ;;MODEL 37
X(EXECUPORT,EXEC,EXE,.RETT,,,) ;;TI EXECUPORT
>;;END TOPS20
TOPS10<
X(LA120,LA120,L12,.RETT,,,) ;;LA120
>;;END TOPS10
X(LA36,LA36,L36,.RETT,,,) ;;LA36
X(VK100,VK100,K10,SETTLC,<.CHESC,"[","K">,<.CHESC,"=">,<.CHESC,.CHRAB>)
X(VT05,VT05,V05,.RETT,<37,177,177,177>,,) ;;VT05
X(VT100,VT100,100,SETTLC,<.CHESC,"[","K">,<.CHESC,"=">,<.CHESC,.CHRAB>) ;;VT100
;;**;[235]ADD 6 LINES AFTER VT100 ENTRY 2-Jun-83/CTK
TOPS10< X(VT101,VT101,101,SETTLC,<.CHESC,"[","K">,<.CHESC,"=">,<.CHESC,.CHRAB>)> ;;[235] VT101
X(VT102,VT102,102,SETTLC,<.CHESC,"[","K">,<.CHESC,"=">,<.CHESC,.CHRAB>) ;;[235] VT102
TOPS10< X(VT103,VT103,103,SETTLC,<.CHESC,"[","K">,<.CHESC,"=">,<.CHESC,.CHRAB>)> ;;[235] VT103
X(VT125,VT125,125,SETTLC,<.CHESC,"[","K">,<.CHESC,"=">,<.CHESC,.CHRAB>) ;;[235] VT125
TOPS10< X(VT180,VT180,180,SETTLC,<.CHESC,"[","K">,<.CHESC,"=">,<.CHESC,.CHRAB>)> ;;[235] VT180
TOPS10< X(VT185,VT185,185,SETTLC,<.CHESC,"[","K">,<.CHESC,"=">,<.CHESC,.CHRAB>)> ;;[235] VT185
X(VT220,VT220,220,SETTLC,<.CHESC,"[","K">,<.CHESC,"=">,<.CHESC,.CHRAB>) ;;VT220
X(VT240,VT240,240,SETTLC,<.CHESC,"[","K">,<.CHESC,"=">,<.CHESC,.CHRAB>) ;;VT240
X(VT320,VT320,320,SETTLC,<.CHESC,"[","K">,<.CHESC,"=">,<.CHESC,.CHRAB>) ;;VT320
X(VT330,VT330,330,SETTLC,<.CHESC,"[","K">,<.CHESC,"=">,<.CHESC,.CHRAB>) ;;VT330
X(VT340,VT340,340,SETTLC,<.CHESC,"[","K">,<.CHESC,"=">,<.CHESC,.CHRAB>) ;;VT340
X(VT50,VT50,V50,SETTLC,<.CHESC,"K">,<.CHESC,"=">,<.CHESC,.CHRAB>) ;;VT50
X(VT52,VT52,V52,SETTLC,<.CHESC,"K">,<.CHESC,"=">,<.CHESC,.CHRAB>) ;;VT52
TOPS10< X(VT61,VT61,V61,SETTLC,<.CHESC,"K">,<.CHESC,"=">,<.CHESC,.CHRAB>)> ;;VT61
LSTON.
>;END DEFINE TRMTYP
;The general form of the X macro (which must be redefined just before invoking
;TRMTYP) is:
;X(PARNAM,SIXNAM,SUF,INITER,EOLSEQ,SETKEY,SETNUM)
;Where,
; PARNAM is the parseable name
; SIXNAM is the (TOPS-10) SIXBIT name for TRMOP. .TOTRM
; SUF is a 3-char suffix for .TTsuf and .TIsuf
; INITER Is the address of a routine to initialize the terminal
; EOLSEQ is a sequence of bytes which will clear to end of line
; SETKEY is a sequence of bytes to set alternate keypad mode
; SETNUM is a sequence of bytes to set numeric keypad mode
;Note:
; .TTsuf is the code to be passed to K%STYP
; This value need not be the same on the -10 and the -20,
; but today, they are.
; .TIsuf is a number between 0 and .TIMAX (inclusive) which may
; be used to $BUILD and $SETup dispatch tables
;Now, define the .TIsuf symbols which are indicies into tables
;which contain 1 entry for each type of terminal
DEFINE X(PARNAM,SIXNAM,SUF,INITER,EOLSEQ,SETKEY,SETNUM),<
.TI'SUF==..Z
..Z==..Z+1>
..Z==0
TRMTYP ;Do 'em all!
.TIMAX==..Z-1 ;Set the max (must $BUILD (.TIMAX+1) still!)
PURGE ..Z
TOPS10<
;Define the .TTsuf symbols, since they're not in UUOSYM
DEFINE X(PARNAM,SIXNAM,SUF,INITER,EOLSEQ,SETKEY,SETNUM),<
.TT'SUF==..Z
..Z==..Z+1
>;END DEFINE X
..Z==0 ;Start at 0
TRMTYP ;Do 'em all!
PURGE ..Z
>;END TOPS10
; The following data structures are defined to support the keypad mode
; in GLXKBD's TEXTI routine.
TOPS10 <
.ORG 0
.ESENT:!BLOCK 1 ;One word/entry
ES.FLG==777600,,0 ;11 bits for flags
EF.IST==1B0 ;Address points to input string
EF.OST==1B1 ; " " " output "
EF.TBL==1B2 ;Address points to another table
EF.LST==1B3 ;Address is a command list table
ES.SIZ==177,,0 ;Size of the bytes
ES.STR==0,,777777 ;The rest is address of string
ESTSIZ:!
.ORG
; The format for the command list table is:
; word 0 : Lenght of table including this word
; word 1 - n : Commands as per above
>;;End TOPS10
; The following TOPS-20 symbols are defined when building a TOPS-10 library
; so that the emulation routines provided for scanning and command
; parsing can use the same symbols on both systems.
TOPS10 < ;ALREADY DEFINED ON THE -20
; RDTTY flags and argument offsets
.RDCWB==0 ;COUNT OF WORDS FOLLOWING
.RDFLG==1 ;FLAG BITS
RD%BRK==1B0 ; BREAK ON ^Z OR ESC
RD%TOP==1B1 ; BREAK ON TOPS-10 BREAK SET
RD%PUN==1B2 ; BREAK ON PUNCTUATION
RD%BEL==1B3 ; BREAK ON EOL
RD%CRF==1B4 ; EAT CARRIAGE RETURNS
RD%RND==1B5 ; RETURN IF EDITED TO BEGINNING
RD%JFN==1B6 ; IFN RATHER THAN STRING PTR
RD%RIE==1B7 ; NON-BLOCKING, I.E. RETURN IF EMPTY
RD%BBG==1B8 ; PTR TO DEST BUFFER IS IN .RDBFP
RD%RAI==1B10 ; CONVERT LOWER TO UPPER CASE
RD%SUI==1B11 ; SUPRESS ^U (RUBOUT LINE) HANDLING
RD%BTM==1B12 ; INPUT ENDED ON A BREAK
RD%BFE==1B13 ; USER DELETED TO BEGINNING
RD%BLR==1B14 ; BACKUP LIMIT REACHED
RD%NEC==1B35 ; NO ECHO ON ANYTHING (TOPS-10)
.RDIOJ==2 ;INPUT AND OUTPUT IFNS OR STRING POINTER
.RDDBP==3 ;DESTINATION BYTE POINTER
.RDDBC==4 ;NUMBER OF BYTES LEFT AFTER POINTER
.RDBFP==5 ;BEGINNING BYTE POINTER
.RDRTY==6 ;RE-TYPE PROMPT POINTER
.RDBRK==7 ;LOCATION OF 4 WORD BREAK SET TABLE
.RDBKL==10 ;REAL (ARBITRARY) BACKUP LIMIT
;; STILL UNDER TOPS10 CONDITIONAL
; COMMAND SCANNING (S%CMND) INTERFACE
;FORMAT OF COMND STATE BLOCK:
.CMFLG==0 ;USER FLAGS,,REPARSE DISPATCH ADDRESS
.CMIOJ==1 ;INJFN,,OUTJFN
.CMRTY==2 ;^R BUFFER POINTER
.CMBFP==3 ;PTR TO TOP OF BUFFER
.CMPTR==4 ;PTR TO NEXT INPUT TO BE PARSED
.CMCNT==5 ;COUNT OF SPACE LEFT IN BUFFER AFTER PTR
.CMINC==6 ;COUNT OF CHARACTERS FOLLOWING PTR
.CMABP==7 ;ATOM BUFFER POINTER
.CMABC==10 ;ATOM BUFFER SIZE
.CMGJB==11 ;ADR OF GTJFN ARG BLOCK
CM%GJB==777777 ;ADR OF GTJFN ARG BLOCK
;FUNCTION DESCRIPTOR BLOCK
.CMFNP==0 ;FUNCTION AND POINTER
CM%FNC==777B8 ;FUNCTION CODE
CM%FFL==377B17 ;FUNCTION-SPECIFIC FLAGS
CM%LST==777777 ;LIST POINTER
.CMDAT==1 ;DATA FOR FUNCTION
.CMHLP==2 ;HELP TEXT POINTER
.CMDEF==3 ;DEFAULT STRING POINTER
.CMBRK==4 ;BREAK SET FOR CM%BRK
; FUNCTION CODES
;Note: The following function code symbols must agree with analogous
;definitions found in MONSYM.
.CMKEY==0 ;KEYWORD
.CMNUM==1 ;NUMBER
.CMNOI==2 ;NOISE WORD
.CMSWI==3 ;SWITCH
.CMIFI==4 ;INPUT FILE
.CMOFI==5 ;OUTPUT FILE
.CMFIL==6 ;GENERAL FILESPEC
.CMFLD==7 ;ARBITRARY FIELD
.CMCFM==10 ;CONFIRM
.CMDIR==11 ;DIRECTORY NAME (PPN)
.CMUSR==12 ;USER NAME (PPN)
.CMCMA==13 ;COMMA
.CMINI==14 ;INITIALIZE COMMAND
.CMFLT==15 ;FLOATING POINT (RSVD)
.CMDEV==16 ;DEVICE NAME
.CMTXT==17 ;TEXT
.CMTAD==20 ;DATE-TIME
.CMQST==21 ;QUOTED STRING
.CMUQS==22 ;UNQUOTED STRING
.CMTOK==23 ;TOKEN
.CMNUX==24 ;NUMBER DELIMITED BY NON-DIGIT
.CMACT==25 ;ACCOUNT
.CMNOD==26 ;NODE
> ;END TOPS10
.RDSIZ==.RDBKL+1 ;SIZE OF ARGUMENT BLOCK
TOPS10 <
;Null JFN
;FLAGS
CM%ESC==1B0 ;ESC SEEN
CM%NOP==1B1 ;NO PARSE
CM%EOC==1B2 ;END OF COMMAND SEEN
CM%RPT==1B3 ;REPEAT PARSE NEEDED
CM%SWT==1B4 ;SWITCH TERMINATED WITH ":"
CM%PFE==1B5 ;PREVIOUS FIELD ENDED WITH ESC
CM%RAI==1B6 ;RAISE INPUT
CM%XIF==1B7 ;NO INDIRECT FILES
CM%WKF==1B8 ;WAKEUP AFTER EACH FIELD
;REMOVE CM%NJF 9/21/79 MLB
CM%NSF==1B12 ;SUFFIX MAY BE OMITTED IF DESIRED
CM%BRK==1B13 ;INDICATES .CMBRK HAS DATA
CM%PO==1B14 ;PARSE ONLY FLAG
CM%HPP==1B15 ;HELP PTR PRESENT
CM%DPP==1B16 ;DEFAULT PTR PRESENT
CM%SDH==1B17 ;SUPPRESS DEFAULT HELP MESSAGE
;FLAGS FOR CMSWI FUNCTION
CM%VRQ==1B0 ;VALUE REQUIRED
;FLAGS FOR TIME AND DATE
CM%IDA==1B0 ;INPUT DATE
CM%ITM==1B1 ;INPUT TIME
CM%NCI==1B2 ;NO CONVERT TO INTERNAL
>;;Pause in TOPS10 definition -- The next 2 symbols will apply for TOPS20 also
CM%FUT==1B3 ;Time is in future
CM%PST==1B4 ;Time is in past
; Resume TOPS10 conditional.
TOPS10 <
CM%WLD==1B5 ;DO WILDCARDING
CM%WLA==1B6 ;DO ACCOUNTING-STYLE WILDCARDING
;[10,#] AND [10,%]
;FLAGS IN KEYWORD TABLE (FIRST WORD OF STRING IF B0-6 = 0)
CM%INV==1B35 ;INVISIBLE
CM%NOR==1B34 ;NO-RECOGNIZE (PLACE HOLDER)
CM%ABR==1B33 ;ABBREVIATION
CM%FW==1B7 ;FLAG WORD (ALWAYS SET)
; STRING COMPARE (S%SCMP) FLAGS
SC%LSS==1B0 ;TEST STRING LESS THAN BASE STRING
SC%SUB==1B1 ;TEST STRING SUBSET OF BASE STRING
SC%GTR==1B2 ;TEST STRING GREATER THAN BASE STRING
;(IF NONE, EXACT MATCH IS RESULT)
; TABLE ADD/DELETE FLAGS - IN S1 WITH TABLE HEADER ADDRESS
TB%ABR==1B0 ;ABBREVIATIONS PRESENT IN KEYWORD TABLE
; TABLE LOOK UP (S%TBLK) FLAGS
TL%NOM==1B0 ;NO MATCH
TL%AMB==1B1 ;AMBIGUOUS
TL%ABR==1B2 ;UNIQUE ABBREVIATION
TL%EXM==1B3 ;EXACT MATCH
> ;END TOPS10
CM%INT==1B9 ;INTERRUPT RET. (10 AND 20..GALAXY DEFINED)
; COMMAND REPLY
CR.FLG==0 ;OFFSET TO FLAG WORD
CR.RES==1 ;OFFSET TO RESULT WORD
CR.PDB==2 ;GIVEN PDB,,USED PDB
CR.COD==3 ;CODE TYPE OF PROCESSED FIELD
CR.SIZ==CR.COD+1 ;SIZE OF COMMAND REPLY BLOCK
;COMMAND ERROR BUFFER SIZE
ERRBSZ==20 ;SETUP 20 WORDS FOR NOW
SUBTTL THE MESSAGE HEADER
;Among GALAXY programs, there is a common message header format
; so that communication and error checking is easier. There are
; also some common function codes (currently only TEXT) which are
; defined across program lines. The specific data (if any) associated
; with each message type follows the standard header. Note also
; that MESSAGE LENGTH includes the header itself.
; !=======================================================!
; ! Message Length ! Message Type !
; !-------------------------------------------------------!
; !ACK!NOM!FAT!WRN!MOR! ! Sixbit Suffix !
; !-------------------------------------------------------!
; ! Acknowledgement code !
; !=======================================================!
.ORG 0
.MSTYP:! BLOCK 1
MS.CNT==-1,,0 ;MESSAGE LENGTH
MS.TYP==0,,-1 ;MESSAGE TYPE
MT.OFF==700000 ;OFFSET TO THE COMMON CODES
MT.TXT==700000 ;TEXT MESSAGE
.MSFLG:!BLOCK 1 ;FLAGS WORD
MF.ACK==1B0 ;ACKNOWLEDGEMENT REQUESTED
MF.NOM==1B1 ;NO MESSAGE, JUST AN ACK
MF.FAT==1B2 ;FATAL MESSAGE
MF.WRN==1B3 ;WARNING MESSAGE
MF.MOR==1B4 ;MORE MESSAGE FOLLOWS
MF.SUF==777777 ;SUFFIX FOR TEXT MESSAGE
.MSCOD:!BLOCK 1 ;USER SUPPLIED CODE USED FOR ACK'ING
MSHSIZ:! ;LENGTH OF MESSAGE
.MSDAT:!BLOCK 0 ;START OF MESSAGE CONTENTS
.ORG
SUBTTL General message format
;The following is a description of the typical messages sent in
;GALAXY.
; !=======================================================!
; \ \
; \ THE MESSAGE HEADER \
; \ \
; !-------------------------------------------------------!
; ! FLAG WORD !
; !-------------------------------------------------------!
; ! ARGUMENT COUNT WORD !
; !=======================================================!
;
; ARGUMENT DATA BLOCKS
;
; !=======================================================!
; ! LENGTH OF THE ARGUMENT ! TYPE OF ARGUMENT !
; !-------------------------------------------------------!
; \ \
; \ ARGUMENT DATA \
; \ \
; !=======================================================!
.ORG MSHSIZ
.OFLAG:! BLOCK 1 ;FLAG WORD FOR MESSAGE
.OARGC:! BLOCK 1 ;ARGUMENT COUNT WORD
.OHDRS:! ;SIZE OF THE HEADER
.ORG
;DESCRIPTION OF THE ARGUMENT BLOCK
.ORG 0
ARG.HD:! BLOCK 1 ;ARGUMENT HEADER WORD
AR.LEN==-1,,0 ;LENGTH OF THE BLOCK
AR.TYP==0,,-1 ;TYPE OF BLOCK
ARG.DA:! BLOCK 1 ;START OF DATA AREA
ARG.SZ:! ;MINIMUM SIZE OF THE BLOCK
.ORG
;General data types for all messages
.OROBJ==100 ;OBJECT BLOCK
.ORTYP==101 ;OBJECT TYPE FIELD
.ORJBN==102 ;JOBNAME TYPE FIELD
.ORSEQ==103 ;SEQUENCE NUMBER FIELD
.ORREA==104 ;REASON TYPE FIELD
.ORDSP==105 ;OPR DISPLAY ARGUMENT
.ORREQ==106 ;REQUEST NUMBER FIELD
.ORNOD==107 ;NODE BLOCK FOR QUASAR VALIDATION
.ORD60==110 ;DN60 BLOCK OF DATA
.ORTIM==111 ;TIME BLOCK (UDT)
.ORJNU==112 ;JOB NUMBER FIELD
;The following function types are currently used as argument types
;.CMNOD FOR NODE NAME TYPE
;.CMTXT FOR TEXT ASCIZ DATA
;.CMIFI FOR INPUT FILE SPEC
;.CMUSR FOR USER ID INFORMATION
;.CMDEV FOR DEVICE DESIGNATOR
SUBTTL ACK - THE GALAXY 'ACK' MESSAGE
; !=======================================================!
; \ \
; \ THE MESSAGE HEADER \
; \ \
; !-------------------------------------------------------!
; ! FLAG WORD (.OFLAG) !
; !-------------------------------------------------------!
; ! ARGUMENT COUNT (.OARGC) !
; !-------------------------------------------------------!
;
; THE MESSAGE BODY BLOCK
;
; !-------------------------------------------------------!
; ! BLOCK LENGTH ! .CMTXT !
; !-------------------------------------------------------!
; \ \
; \ ASCIZ TEXT MESSAGE \
; \ \
; !-------------------------------------------------------!
;
; THE MESSAGE HEADER BLOCK
;
; !-------------------------------------------------------!
; ! BLOCK LENGTH ! .ORDSP !
; !-------------------------------------------------------!
; \ \
; \ ASCIZ MESSAGE HEADER \
; \ \
; !-------------------------------------------------------!
; NOTE:::: * * * * * N O T E W E L L * * * * *
;
; THE 'ACK' CODE THAT WAS SUPPLIED BY THE USER IN THE ORIGIONAL
; REQUEST WILL BE RETURNED IN .MSCOD
;
;
; THE MESSAGE TYPE MAY BE MT.TXT (OLD MSG TYPE) OR
; .OMTXT OR .OMACS (NEW ACK MESSAGE TYPE(S))
;
;
; THE .ORDSP BLOCK WILL ONLY BE FOUND IN A .OMACS MESSAGE
;
;
; THE .MSCOD FIELD MAY HAVE BITS MF.NOM, MF.FAT, MF.WRN,
; MF.MOR LIT.
; THE .MSCOD FIELD MAY ALSO HAVE MF.SUF FILLED IN.
SUBTTL JIB - Job Information Block
;The foJob Information Block contains the GALAXY Information to describe
;a job to the system. This block will be used to pass this information
;between all Galaxy Components.
; !=======================================================!
; ! JOBNAME IN SIXBIT !
; !-------------------------------------------------------!
; ! SEQUENCE NUMBER OF JOB ! QUASAR DEFINED FIELDS !
; !-------------------------------------------------------!
; ! USER NUMBER ON -20 OR PPN ON -10 !
; !-------------------------------------------------------!
; ! REQUEST IDENTIFIER FOR JOB !
; !=======================================================!
;
;
;
; !=======================================================!
; ! !
; ! USER NAME (TOPS-10 ONLY) !
; ! !
; !=======================================================!
.ORG 0
JIB.JN:! BLOCK 1 ;JOB NAME IN SIXBIT
JIB.SQ:! BLOCK 1 ;SEQUENCE NUMBER FIELD
JB.SEQ==777700,,0 ;SEQUENCE NUMBER (QUASAR RESTRICTION)
JIB.US:! BLOCK 1 ;USER NUMBER OR PPN
JIB.ID:! BLOCK 1 ;REQUEST IDENTIFIER NUMBER
TOPS10<
JIB.NM:! BLOCK 2 ;USER NAME 2 SIXBIT WORDS (TOPS-10 ONLY)
>;END TOPS10
JIBSIZ:! ;SIZE OF THE JOB INFO BLOCK
.ORG
SUBTTL OBJ - Object Descriptor
; Various programs must use a device/object designator which fully
; describes a an entity as to its type,unit number and node. The canonical
; object descriptor is used for this purpose
; The object/device designator:
; !=======================================================!
; ! Object type descriptor code !
; !-------------------------------------------------------!
; ! Low Bound unit number ! High Bound unit number !
; !-------------------------------------------------------!
; ! Node name in SIXBIT !
; !=======================================================!
.ORG 0
OBJ.TY:! BLOCK 1 ;OBJECT TYPE CODE WORD
; (DEFINED IN OBJCTS MACRO)
OBJ.UN:! BLOCK 1 ;UNIT NUMBER WORD
OU.HRG==-1,,0 ;MASK FOR HIGH RANGE OF UNIT
OU.LRG==0,,-1 ;MASK FOR LOW RANGE OF UNIT
;HRG=0 MEANS ONLY ONE ITEM
;HRG=-1MEANS UP TO HIGHEST EXISTING
OBJ.ND:! BLOCK 1 ;NODE NAME, KEPT IN SIXBIT
OBJ.SZ:! ;SIZE OF THE OBJECT DESIGNATOR
.ORG
SUBTTL OBJCTS MACRO
;THIS MACRO ASSOCIATES ALL LEGAL OBJECT CODES (SEE OBJECT DESCRIPTOR
; DEFINITION) WITH A TEXT STRING FOR THE OBJECT TYPE
DEFINE OBJCTS,<
X .OTRDR,Reader
X .OTNCU,Network-Controller
X .OTLPT,Printer
X .OTBAT,Batch-Stream
X .OTCDP,Card-Punch
X .OTPTP,Papertape
X .OTPLT,Plotter
X .OTTRM,Terminal
X .OTJOB,Job
X .OTOPR,Operator
X .OTIBM,<IBM Remote>
X .OTMNT,<Device>
X .OTFTS,<File Transfer>
X .OTBIN,<Card Reader Interpreter>
X .OTRET,<File Retrieval>
X .OTNOT,<Retrieval Notification>
X .OTDBM,<DBMS System>
X .OTFAL,<FAL-Stream>
X .OTEVT,<Event>
X .OTFCH,<Microfiche>
X .OTXER,<Xerox>
X .OTNQC,<NQC-Stream>
> ;END OF OBJCTS DEFINITION
ZZ==0
DEFINE X (NAM,TXT),<NAM==<ZZ==ZZ+1>>
OBJCTS
.OTMAX==ZZ
SUBTTL FD - File Descriptor
; The FD (File Descriptor) is the data structure used to pass a system
; dependent file description to subroutines or as part of a larger
; message or data structure.
.ORG 0
.FDLEN:! BLOCK 1 ;LENGTH WORD
FD.LEN==-1,,0 ;MASK TO LENGTH FIELD
FD.TYP==0,,-1 ;TYPE OF FD
.FDNAT==0 ;NATIVE FILE DESCRIPTOR
.FDLOC==1 ;ASCIZ LOCAL FILE DESRIPTOR
.FDNET==2 ;ASCIZ REMOTE FILE DESCRIPTOR
.FDFRN==3 ;ASCIZ FORIEGN FILE DESCRIPTOR
; (NON-DECNET)
.FDFIL:! ;FIRST WORD OF FILESPECIFICATION
.ORG
TOPS10 < ;FILE DESCRIPTOR FOR TOPS10
; !=======================================================!
; ! LENGTH OF THE FD !
; !-------------------------------------------------------!
; ! STRUCTURE CONTAINING THE FILE !
; !-------------------------------------------------------!
; ! FILE NAME !
; !-------------------------------------------------------!
; ! EXTENSION !
; !-------------------------------------------------------!
; ! [P,PN] !
; !=======================================================!
; ! !
; ! SFD PATH FOR THE FILE !
; ! THESE WORDS ARE OPTIONAL !
; ! AND CAN BE OF LENGTH 0 TO 5 !
; ! !
; !=======================================================!
.ORG .FDFIL
.FDSTR:! BLOCK 1 ;STRUCTURE CONTAINING THE FILE
.FDNAM:! BLOCK 1 ;THE FILE NAME
.FDEXT:! BLOCK 1 ;THE EXTENSION
.FDPPN:! BLOCK 1 ;THE OWNER OF THE FILE
FDMSIZ:! ;MINUMUM SIZE OF A FILE DESCRIPTOR
.FDPAT:! BLOCK 5 ;PATH (OPTIONAL AND FROM 0 TO 5 WORDS)
FDXSIZ:! ;MAXIMUM FD AREA SIZE
.ORG
> ;END OF TOPS10
;CONTINUED ON FOLLOWING PAGE
TOPS20 < ;FILE DESCRIPTOR FOR TOPS20 (FD.TYP==.FDNAT)
; !=======================================================!
; / /
; / /
; / THE FILE DESCRIPTOR ON TOPS20 IS AN ASCIZ STRING /
; / OF VARIABLE LENGTH AND READY TO BE GTJFN'ED /
; / /
; / /
; !=======================================================!
.ORG .FDFIL
.FDSTG:! BLOCK 1 ;ASCIZ STRING FOR GTJFN/OPENF SEQUENCE
FDMSIZ:! ;MINIMUM SIZE OF A FILE DESCRIPTOR
FDXSIZ==^D300/^D5 ;RESERVE ROOM FOR 300 CHARACTERS
.ORG
> ;END OF TOPS20
; FILE DESCRIPTOR FOR LOCAL FILE (FD.TYP==.FDLOC)
; !=======================================================!
; / /
; / THE FILE DESCRIPTOR FOR THE LOCAL FILESPEC MAY BE /
; / AN ASCIZ STRING IN A FORM ACCEPTABLE TO THE LOCAL /
; / SYSTEM /
; / DEV:[PPN]FILE.EXT OR DEV:[DIRECTORY]FILE.EXT.GEN /
; / /
; !=======================================================!
; FILE DESCRIPTOR FOR REMOTE DECNET NODE (FD.TYP==.FDNET)
; !=======================================================!
; / /
; / THE FILE DESCRIPTOR FOR A DECNET FILESPEC IS AN /
; / ASCIZ STRING OF THE FORM NODE::DEV:[PPN]FILE.EXT /
; / OR NODE::DEV:[DIRECTORY]FILE.EXT.GEN /
; / /
; !=======================================================!
.ORG .FDFIL
.FDNST:! BLOCK 1 ;ASCIZ STRING FOR GTJFN/OPENF SEQUENCE
FDNSIZ==^D300/^D5 ;RESERVE ROOM FOR 300 CHARACTERS
.ORG
; FILE DESCRIPTOR FOR A FORIEGN NODE (FD.TYP==.FDFRN)
; !=======================================================!
; / /
; / THE FILE DESCRIPTOR FOR A FORIEGN NODE IS AN ASCIZ /
; / STRING OF THE FORM: /
; / NODE::REMOTE-FILESPEC OR NODE::"REMOTE-FILESPEC" /
; / /
; !=======================================================!
SUBTTL FOB - Parameter block passed to F%IOPN and F%OOPN
; THE FOLLOWING IS A DESCRIPTION OF THE BLOCK USED AS A PARAMETER
; PASSING AREA TO THE TWO FILE OPEN ROUTINES IN GLXFIL.
; !=======================================================!
; ! ADDRESS OF FD TO USE FOR FILE SPECIFICATION !
; !-------------------------------------------------------!
; ! !LSN!NFO!BYTE SIZE!
; !-------------------------------------------------------!
; ! FIRST HALF OF USER ID FOR "IN BEHALF OF" !
; !-------------------------------------------------------!
; ! CONNECTED DIRECTORY (TOPS-20 ONLY) !
; !=======================================================!
.ORG 0
FOB.FD:! BLOCK 1 ;POINTER TO FD AREA
FOB.CW:! BLOCK 1 ;CONTROL WORD
FB.PHY==1B27 ;PHYSICAL OPEN
FB.LSN==1B28 ;LINE SEQUENCE NUMBERS APPEAR (IGNORE)
FB.NFO==1B29 ;NEW FILE ONLY (NON-SUPERSEDING)
FB.BSZ==77B35 ;BYTE SIZE OF THE FILE
FOB.MZ:! ;MINIMUM SIZE OF A FOB
FOB.US:! BLOCK 1 ;USER ID FOR "IN BEHALF" OPERATIONS
FOB.CD:! BLOCK 1 ;CONNECTED DIRECTORY (TOPS-20)
FOB.AB:! BLOCK 1 ;FILE ATTRIBUTE BLOCK ADDRESS
FOB.SZ:! ;SIZE OF AN FOB
.ORG
; File attribute definitions
;
FI.IMM==1B0 ;ARGUMENT IS AN IMMEDIATE VALUE
FI.IFN==1B1 ;ARGUMENT VALUE IS FROM ANOTHER FILE (GIVEN BY IFN)
FI.LEN==777B17 ;LENGTH (IN WORDS) OF ATTRIBUTE
FI.ATR==777777B35 ;FILE ATTRIBUTE MASK
.FIPRO==1 ;PROTECTION CODE
.FIACT==2 ;ACCOUNT STRING
.FISPL==3 ;SPOOLED FILE NAME
.FICRY==4 ;ENCRYPTION CODE
.FIDTY==5 ;DATA TYPE
.FIDTO==6 ;DATA "OTS" TYPE
.FIDCC==7 ;DATA CARRIAGE CONTROL
.FIBSZ==10 ;LOCAL DATA BYTE SIZE
.FIFSZ==11 ;PHYSICAL DATA FRAME SIZE
.FIHSZ==12 ;FIXED-HEADER SIZE (FOR VARIABLE-LENGTH RECORDS)
.FIRFM==13 ;RECORD FORMAT
.FIRFO==14 ;RECORD FORMAT ORGANIZATION
.FIRSZ==15 ;RECORD SIZE
.FIBLS==16 ;BLOCK SIZE (BYTES)
.FIFFB==17 ;FIRST FREE BYTE WITHIN LAST BLOCK
.FIACW==20 ;APPLICATION-SPECIFIC FIELD
.FIRMS==21 ;RMS-10 FORMATTED FILE
.FIMCY==22 ;MACY11 FORMATTED FILE
.FICTG==23 ;CONTIGUOUS ALLOCATION
.FINSB==24 ;RECORDS DO NOT SPAN PHYSICAL BLOCKS
.FICRE==25 ;CREATION DATE/TIME (UDT)
.FIACD==26 ;ACCESS DATE
.FIMOD==27 ;I/O MODE OF FILE
.FIVER==30 ;VERSION OF FILE IN STANDARD FORMAT
.FIUSW==31 ;USER-SETTABLE WORD
.FIMTA==32 ;TAPE LABEL
.FISTS==33 ;FILE STATUS BITS
.FIIDT==34 ;BACKUP DATE/TIME
.FIPCA==35 ;PRIVILEGED CUSTOMER-SETTABLE WORD
.FITIM==36 ;PHYSICAL CREATION DATE/TIME
.FILAD==37 ;LAST ACCOUNTING DATE
.FIEXP==40 ;EXPIRATION DATE (UDT)
.FIAUT==41 ;FILE AUTHOR
.FIMAX==.FIAUT ;HIGHEST LEGAL ATTRIBUTE TYPE
SUBTTL FRB - Parameter block passed to F%REN for renames
; THE FOLLOWING BLOCK IS SET UP BY THE CALLER OF F%REN IN GLXFIL.
; THE BLOCK PROVIDES THE SOURCE AND DESTINATION OF THE RENAME, AS
; WELL AS NEEDED PROTECTION INFORMATION.
; !=======================================================!
; ! POINTER TO FD DESCRIBING SOURCE OF THE RENAME !
; !-------------------------------------------------------!
; ! POINTER TO FD DESCRIBING DESTINATION OF THE RENAME !
; !-------------------------------------------------------!
; ! USER ID FOR AN "IN BEHALF" RENAME !
; !-------------------------------------------------------!
; !CONNECTED DIRECTORY FOR AN "IN BEHALF" RENAME (TOPS-20)!
; !-------------------------------------------------------!
; ! FLAG BITS !
; !=======================================================!
.ORG 0
FRB.SF:! BLOCK 1 ;POINTER TO FD OF SOURCE FILE
FRB.DF:! BLOCK 1 ;POINTER TO FD OF DESTINATION FILE
FRB.MZ:! ;MINIMUM SIZE OF AN FRB
FRB.US:! BLOCK 1 ;USER ID FOR IN BEHALF
FRB.CD:! BLOCK 1 ;CONNECTED DIRECTORY (TOPS20)
FRB.FL:! BLOCK 1 ;RENAME FLAG BITS
FR.NFO==1B0 ;NEW FILE ONLY
FR.PHY==1B1 ;PHYSICAL RENAME
FRB.AB:! BLOCK 1 ;FILE ATTRIBUTE BLOCK ADDRESS
FRB.SZ:! ;SIZE OF AN FRB
.ORG
SUBTTL IB - Initialization Block for GALAXY programs
;All programs which make use of the GALAXY library or runtime system
; must go through an initialization call to insure that the
; modules are in a determinant state, and also to set up the
; profile that this program wants. This initialization is
; carried out using a communications area, the Initialization
; Block, from which parameters are read and information filled in.
;
; The initialization call to I%INIT is made with S1 containing the
; size of the IB and S2 containing its address.
; Initialization Block (IB):
; !=======================================================!
; ! Address of output routine for defaulted $TEXTs !
; !-------------------------------------------------------!
; !OCT!STP!DET! program-wide flags !
; !-------------------------------------------------------!
; ! Base of program's interrupt vector(s) !
; !-------------------------------------------------------!
; ! PID block address !
; !-------------------------------------------------------!
; ! $TEXT error exit routine !
; !=======================================================!
.ORG 0
IB.OUT:! BLOCK 1 ;ADDRESS OF ROUTINE TO CALL FROM
;OUTPUT ROUTINE IF $TEXT SPECIFIES NONE
IB.FLG:! BLOCK 1 ;Program-wide flag word
IT.OCT==1B0 ; OPEN COMMAND TERMINAL
IP.STP==1B1 ; SEND STOPCODES TO ORION AS WTO IF SET
IB.DPM==1B2 ; USE JOB NUMBER FOR A PID
IB.NPF==1B3 ; DON'T SETUP PFH
IB.SAV==1B4 ; DO A SAVE. UUO ON A STOPCODE
IB.INT:! BLOCK 1 ;BASE OF INTERRUPT VECTOR(S)
IB.PIB:! BLOCK 1 ;Address of PID block
IB.ERR:! BLOCK 1 ;USER $TEXT ERROR EXIT ROUTINE ADDRESS.
IB.PRG:! BLOCK 1 ;PROGRAM NAME
IB.SZ:! ;SIZE OF THE IB
.ORG
SUBTTL PIB - PID block
;This block describes the PID that the program wishes to become, and
;other assorted flavors of IPCF parameters. It is a parameter
;for the C%CPID, C%KIPD, C%SPID calls, and is aimed at by the IB.
; !=======================================================!
; ! Length ! !
; !-------------------------------------------------------!
; ! PID (filled by GLXLIB) !
; !-------------------------------------------------------!
; !PSI!JWP!RSE!SPI!CFV!SPB! !
; !-------------------------------------------------------!
; ! System index ! !Chan or offst!
; !-------------------------------------------------------!
; ! Max # of PIDs ! Send quota !Receive quota!
; !-------------------------------------------------------!
; ! Pointer to INFO NAME (optional) !
; !-------------------------------------------------------!
; ! Pointer to ACCOUNT string (optional) !
; !-------------------------------------------------------!
; ! Pointer to LOCATION string (optional) !
; !=======================================================!
.ORG 0
PB.HDR:! BLOCK 1 ;The PID block header word
PB.LEN==LHMASK ;Length of this block
PB.PID:! BLOCK 1 ;The PID assigned (filled by GLXLIB)
PB.FLG:! BLOCK 1 ;Flags
IP.PSI==1B0 ;Connect this PID to the PSI system
IP.JWP==1B1 ;Get a job-wide PID (good till logout)
IP.RSE==1B2 ;Return to caller if send fails
IP.SPF==1B3 ;Special PID Flag (caller wants to
; be a system PID)
IP.SPB==1B5 ;SET IF CALLER IS PRIVELEGED AND WISHES
; TO SEE IF SENDER SET IP.CFP
PB.INT:! BLOCK 1 ;Interrupt channel or offset
IP.SPI==LHMASK ;Special PID index
IP.CHN==77 ;Channel
PB.SYS:! BLOCK 1 ;Special index, quotas
IP.MNP==LHMASK ;Max # PIDs for this job
IP.SQT==777B26 ;Send Quota
IP.RQT==777B35 ;Receive Quota
IP.BQT==IP.SQT!IP.RQT ;Both Quotas
PB.MNS:! ;Minimum size of a PIB
PB.NAM:! BLOCK 1 ;Pointer to Name string
PB.ACT:! BLOCK 1 ;Pointer to Account string
PB.LOC:! BLOCK 1 ;Pointer to Location string
PB.MXS:! ;Maximum size of PIB
.ORG
SUBTTL SAB - Send Argument Block passed to C%SEND
;This block describes the IPCF message being sent
; !=======================================================!
; ! DESTINATION PID OR ADRS OF NAME STRING !
; !-------------------------------------------------------!
; ! LENGTH OF MESSAGE !
; !-------------------------------------------------------!
; ! ADDRESS OF MESSAGE !
; !-------------------------------------------------------!
; !FLG! SYSTEM PID INDEX !
; !-------------------------------------------------------!
; ! 0 or PID Block address to send for !
; !=======================================================!
.ORG 0
SAB.PD:! BLOCK 1 ;PID TO SEND MESSAGE TO
; OR ADDRS OF NAME STRING
SAB.LN:! BLOCK 1 ;LENGTH OF MESSAGE TO SEND
; THIS FIELD DEFINES IF THE MESSAGE IS
; TO BE SENT AS A PAGE OR A PACKET
; A LENGTH OF EXACTLY 1000 WILL
; CAUSE A PAGE-MODE SEND OF THE
; THE PAGE POINTED TO BY SAB.MS
; OTHERWISE THE MESSAGE WILL BE
; SENT AS A PACKET IF POSSIBLE OR
; COPIED TO A NEW PAGE IF NECESSARY
SAB.MS:! BLOCK 1 ;STARTING ADDRESS OF MESSAGE
; IF SAB.LN CONTAINS 1000, AN ERROR
; WILL OCCUR IF THIS IS NOT THE
; FIRST ADDRESS OF A PAGE
SAB.SI:! BLOCK 1 ;INFORMATION ON SPECIAL SYSTEM PID
SI.FLG==1B0 ;SET IF SI.IDX IS TO BE USED
SI.NAM==1B1 ;SET IF SAB.PD CONTAINS THE ADRS OF
;A STRING (NAME OF PROCESS TO SEND TO)
SI.IDX==0,,-1 ;SENDER'S INDEX IN SYSTEM PID TABLE
;NOTE, SETTING SP.FLG AND FILLING IN A
;VALID INDEX IS SUFFICIENT TO IDENTIFY
;THE DESTINATION OF A SEND. IN THIS CASE,
;THE DESTINATION PID NEED NOT BE FILLED IN
SAB.PB:! BLOCK 1 ;0, or address of PIB describing PID
;for which send is to be done
SAB.MZ:! ;MIMIUM LENGTH OF SAB
SAB.FL:! BLOCK 1 ;FLAG WORD
SF.PRV==1B29 ;SENDER WISHES TO INVOKE PRIVILEGES
SF.ECD==77B35 ;ERROR CODE TO SET ON SENDS
SAB.SZ:! ;LENGTH OF THE SAB
.ORG
SUBTTL MDB - Message Descriptor Block returned by C%RECV
;This block describes the IPCF message received by C%RECV or C%BRCV
; !=======================================================!
; ! FLAGS !
; !-------------------------------------------------------!
; ! SENDER'S PID !
; !-------------------------------------------------------!
; ! RECEIVER'S PID !
; !-------------------------------------------------------!
; ! LENGTH OF MESSAGE ! ADDRESS OF MESSAGE !
; !-------------------------------------------------------!
; ! SENDER'S LOGGED-IN DIRECTORY !
; !-------------------------------------------------------!
; ! SENDER'S PRIVILEGES !
; !-------------------------------------------------------!
; ! SENDER'S CONNECTED DIRECTORY !
; !-------------------------------------------------------!
; !FLG! SYSTEM PID INDEX !
; !=======================================================!
.ORG 0
MDB.FG:! BLOCK 1 ;MESSAGE FLAGS (SEE UUOSYM.MAC)
MDB.SP:! BLOCK 1 ;SENDER'S PID
MDB.RP:! BLOCK 1 ;RECEIVER'S PID
MDB.MS:! BLOCK 1 ;MESSAGE INFORMATION
MD.CNT==-1,,0 ;WORD COUNT OF MESSAGE
MD.ADR==0,,-1 ;ADDRESS OF MESSAGE
MDB.SD:! BLOCK 1 ;SENDER'S LOGGED IN DIRECTORY
MDB.PV:! BLOCK 1 ;SENDER'S PRIVILEGES
MD.PWH==1B0 ;PROCESS HAS WHEEL PRIVILEGES
MD.POP==1B1 ;PROCESS HAS OPERATOR PRIV.
MD.PMT==1B2 ;PROCESS HAS MAINTENANCE PRIV.
MD.PIP==1B3 ;PROCESS HAS IPCF PRIV.
MD.POK==1B4 ;PROCESS HAS POKE PRIV.
MD.PLG==1B5 ;PROCESS IS LOGGED IN
MD.PXO==1B6 ;PROCESS IS EXECUTE-ONLY
MD.PJB==777B35 ;JOB NUMBER OF SENDER
MD.PJH==0,,-1 ;JCH OF SENDER
MDB.CD:! BLOCK 1 ;SENDER'S CONNECTED DIRECTORY
MDB.SI:! BLOCK 1 ;SENDER'S SPECIAL SYSTEM PID TABLE INFO
SI.FLG==1B0 ;SET IF SI.IDX IS TO BE USED
SI.IDX==0,,-1 ;SENDER'S INDEX IN SYSTEM PID TABLE
MDB.SZ:! ;MDB LENGTH
.ORG
SUBTTL CJB - Create Job Block used in call to I%CJOB
;This block describes the format of the block pass to I%CJOB for
;starting up a (usually) Galactic component.
;
; !=======================================================!
; ! SIXBIT PROGRAM NAME !
; !-------------------------------------------------------!
; ! TIME TO WAIT (SECONDS) ! SPECIAL PID INDEX !
; !-------------------------------------------------------!
; ! FLAGS ! ! QSR ! STC !
; !-------------------------------------------------------!
; ! UP TO %CJSTC WORDS OF TEXT !
; .
; .
; ! STRING POINTERS !
; !=======================================================!
%CJSTC==4 ;MAX NUMBER OF TEXT STRINGS
.ORG 0
CJB.NM:! BLOCK 1 ;PROGRAM NAME IN SIXBIT
CJB.TP:! BLOCK 1 ;CONTAINS WAIT TIME AND PID INDEX
CJ.TIM==-1,,0 ;SECONDS TO WAIT (0 TO +262143)
CJ.SPI==0,,-1 ;SPECIAL PID INDEX
CJB.FL:! BLOCK 1 ;FLAGS AND OTHER ERRATA
CJ.DEP==7B2 ;CURRENT DEPENDENCY FIELD WIDTH
CJ.ANF==1B0 ;ANF NETWORK REQUIRED
CJ.DCN==1B1 ;DECNET REQUIRED
CJ.D60==1B2 ;DN60 CODE REQUIRED
CJ.STC==17B35 ;COUNT OF TEXT STRING POINTERS
CJ.QSR==7B31 ;RESERVED FOR QUASAR USE
CJB.ST:! BLOCK %CJSTC ;POINTERS TO ASCIZ TEXT STRINGS
CJB.SZ:! ;SIZE OF CJB
.ORG
SUBTTL Special system PIDS
;For convenience, we define a macro which can generate code or data
;for all system PIDS which are of interest to the GALAXY library.
;Anyone interested in generating data or code for all special PIDS should
;define the .SPID macro, and invoke SPIDS
;The .SPID MACRO will take 4 params, a canonical index name, TOPS10 value,
;TOPS20 value, SIXBIT name of debugging component
DEFINE SPIDS,<
.SPID (SP.QSR,.IPCPQ,.SPQSR,QUASAR) ;;QUASAR
.SPID (SP.OPR,.IPCPO,.SPOPR,OPERATOR)
.SPID (SP.INF,.IPCPI,.SPINF,INFO) ;;INFO
.SPID (SP.MDA,.IPCPM,.SPMDA,MDA) ;;Mountable device allocator
TOPS10<
.SPID (SP.IPC,.IPCPS,,IPCC) ;;IPC Controller
.SPID (SP.ACT,.IPCPA,,ACCOUNTING DAEMON)
.SPID (SP.TLP,.IPCPT,,TAPE LABELLER)
.SPID (SP.TOL,.IPCPC,,TAPE AVR) ;;Tape Auto-Vol-Recognizer
.SPID (SP.DOL,.IPCPD,,DISK AVR) ;;Disk Auto-Vol-Recognizer
.SPID (SP.FIL,.IPCPF,,FILE DAEMON)
.SPID (SP.CAT,.IPCPV,,CATALOG DAEMON)
.SPID (SP.ERL,.IPCPL,,ERROR LOGGER)
.SPID (SP.TGH,.IPCPE,,TGHA)
.SPID (SP.NCP,.IPCNM,,DECNET CONTROLLER)
.SPID (SP.MAI,.IPCPX,,MAILER)
.SPID (SP.GFR,.IPCPG,,GOPHER)
>;;End TOPS10
>;End DEFINE SPIDS
SUBTTL System Independent IPCF Codes and Constants
;The constants and codes presented here are used to prevent
;too many feature test switches in the various modules. When the two
;operating systems present two different codes for the same error
;situation, or two different indices for the same type of entry in a table,
;we can use SYSPRM to make up a canonical code for use by the GALAXY system.
;This makes for more readable code and lessens the chance of error.
;IPCF error messages
SYSPRM IPE.SQ,IPCRS%,IPCFX6 ;SENDER'S QUOTA EXHAUSTED
SYSPRM IPE.RQ,IPCRR%,IPCFX7 ;RECEIVER'S QUOTA EXHAUSTED
SYSPRM IPE.SF,IPCRY%,IPCFX8 ;SYSTEM FREE SPACE EXHAUSTED
SYSPRM IPE.DU,IPCDU%,IPCFX4 ;DESTINATION PID IS UNKNOWN
SYSPRM IPE.DD,IPCDD%,IPCFX5 ;DESTINAION PID IS DISABLED
SYSPRM IPE.WM,IPCPR%,IPCF16 ;RECEPTION IN THE WRONG MODE
SYSPRM IPE.NR,IPCUP%,777777 ;NO ROOM IN CORE (TOPS-10 ONLY)
SYSPRM IPE.NM,IPCNP%,IPCFX2 ;NO MESSAGE IS AVAILABLE
;IPCF codes
SYSPRM IP.CFV,IP.CFV,IP%CFV ;PAGE MODE BIT
SYSPRM IP.CFC,IP.CFC,IP%CFC ;FROM SYSTEM INFO OR IPCC
SYSPRM IP.CFE,IP.CFE,IP%CFE ;ERROR INDICATOR'S IN DESCRIPTOR
SYSPRM IP.CFM,IP.CFM,IP%CFM ;A RETURNED MESSAGE
SYSPRM IP.CFP,IP.CFP,IP%CFP ;PRIVILEGED SEND
SYSPRM IP.TTL,IP.CFT,IP%TTL ;TRUNCATE IF TOO LONG
SYSPRM IP.CFB,IP.CFB,IP%CFB ;DO NOT BLOCK ON RECEIVE
SYSPRM IP.CFS,IP.CFS,IP%CFS ;INDIRECT SENDERS PID
SYSPRM IP.CFR,IP.CFR,IP%CFR ;INDIRECT RECIEVERS PID
;Special System PID table indices
DEFINE .SPID(CANNAM,T10IDX,T20IDX,SYMBOL),<
SYSPRM CANNAM,T10IDX,T20IDX ;;DEFINE INDEX
IFG CANNAM-MX.PID,<MX.PID==CANNAM> ;;KEEP TRACK OF MAXIMUM
>;END DEFINE .SPID
MX.PID==0 ;Start with 0 as the max
SPIDS ;Generate the special PIDS
MX.PID==MX.PID ;Publish the maximum
SUBTTL Program internal parameters of interest
; IN ORDER THAT CALLERS OF GLXLIB PROGRAMS CAN MAKE THE MOST EFFICIENT
; USE OF THEM, SEVERAL PARAMETERS WHICH ARE REALLY INTERNAL TO THE
; SEPARATE COMPONENTS ARE DECLARED HERE, SO THAT THEY ARE ACCESSIBLE.
;
; VALUES DECLARED HERE ARE "READ-ONLY" AND SHOULD NOT BE CHANGED
; WITHOUT CONSULTING THE LISTING OF THE ACTUAL GLXLIB COMPONENT.
; PARAMETERS USED BY: GLXFIL
SYSPRM SZ.IFN,^D52,^D30 ;NUMBER OF FILES OPEN SIMULTANEOUSLY
SYSPRM SZ.BUF,200,1000 ;SIZE OF BUFFER AREA
SYSPRM SZ.OBF,200,1000 ;MAXIMUM WORDS XFERRED ON F%?BUF CALL
SYSPRM .PRIIN,377776,.PRIIN ;PRIMARY INPUT JFN
SYSPRM .PRIOU,377777,.PRIOU ;PRIMARY OUTPUT JFN
SYSPRM .NULIO,377775,.NULIO ;NULL I/O JFN
; PARAMETERS USED BY: GLXIPC
ND SZ.PAK,PAGSIZ-1 ;MAXIMUM SIZE OF A SHORT PACKET
ND SZ.PID,MX.PID+1 ;MAXIMUM NUMBER OF SYSTEM PIDS
ND RT.SLP,^D3 ;TIME TO SLEEP (SECS) BETWEEN RETRIES
ND RT.SFL,^D5 ;RETRIES ON A SEND FAILURE
ND RT.SCL,^D60 ;RETRIES ON A SYSTEM-COMPONENT TIME-OUT
; PARAMETERS USED BY: GLXMEM
ND DDCNT,5 ;PAGES ADDED TO FREE POOL BEFORE
;DUMPING DICTIONARY
ND DCT.MN,1 ;MINIMUM SIZE OF ENTRIES IN DICTIONARY
ND DCT.MX,^D50 ;MAXIMUM SIZE OF ENTRY IN DICT
ND IPCPAD,1 ;MINIMUM NUMBER OF PAGES THAT MUST BE FREE
;BEFORE M%NXPG WILL RETURN ONE
ND CNK.PM,^D24 ;CHUNK MANAGERS PAGE COUNT BEFORE CLEANUP
ND PAGAVL,^D10 ;MAX PAGES IN MEM MANAGER BEFORE CLEANUP
PT.FLG==777 ;FLAG FIELD OF PAGE TABLE ENTRY
PT.USE==1B35 ;INDICATES PAGE IS IN USE
PT.ADR==1B34 ;PAGE IS ADDRESSABLE (I.E. EXISTS)
PT.INI==1B33 ;PART OF INITIAL IMAGE (I.E. CODE, ETC.)
; PARAMETERS USED BY: GLXOTS & GLXINI
TOPS10 <OTSNAM==SIXBIT /GLXLIB/> ;LIBRARY NAME
TOPS20 <DEFINE OTSNAM,< [ASCIZ \GLXLIB.EXE\]>>
; PARAMETERS USED BY: GLXINT
INT.MX==3 ;INTERRUPT LEVELS TO INCLUDE
SYSPRM INT.LV,1,3 ;MAXIMUM NUMBER OF ACTIVE INTERRUPT LEVELS
ND IPL.SZ,^D50 ;INTERRUPT STACK DEPTH
SUBTTL $HALT -- Halt a Program without Reset
SYSPRM $HALT,<EXIT 1,>,<HALTF> ;EXIT WITHOUT RESET
SUBTTL PDB - PARSER DESCRIPTOR BLOCK DEFINITION
; THE PARSER DESCRIPTOR BLOCK (PDB) IS THE BASIC DATA STRUCTURE USED TO
;CONTROL THE ACTION OF THE PARSER ROUTINE. THE PDB CONSISTS OF THE STANDARD
;FUNCTION DESCRIPTOR BLOCK (FDB) AS USED BY THE COMND JSYS, PLUS FOUR
;ADDITIONAL WORDS USED BY THE PARSER ROUTINE TO CONTROL THE PARSE. THE PDBDEF
;MACRO IS USED TO BUILD A PDB AND ALLOWS THE PROGRAMMER TO SPECIFY ALL OF
;THE FIELD PARAMETERS. IN ADDITION, THERE ARE A NUMBER OF MNEMONIC MACROS
;WHICH ALLOW THE USER TO BUILD FUNCTION SPECIFIC PDBS' AND PROVIDE A COMMON
;SUBSET OF THE PARAMETER FIELDS. THE PDBS' ARE LINKED THROUGH A NEXT PDB
;CHAIN FIELD, AND AN ALTERNATE PDB CHAIN FIELD TO FORM A TREE LIKE STRUCTURE
;WHICH DEFINES THE COMMAND SYNTAX. THE PARSE ROUTINE, WHEN PASSED THE ADDRESS
;OF THE ROOT OF THE TREE, THEN PARSES ONE COMPLETE COMMAND AND RETURNS CONTROL
;TO THE CALLER. THERE IS A PROVISION FOR THE USER TO SPECIFY EXIT ROUTINES
;WITHIN EACH PDB WHICH WILL BE CALLED AT CRITICAL POINTS AS THE PARSE
;PROGRESSES.
;
; THE FORMAT OF THE PARSER DESCRIPTOR BLOCK IS SHOWN BELOW:
;
;
;
; !=======================================================!
; ! FUNCTION ! FUNCTION ! ADDRESS OF NEXT FUNCTION !
; ! CODE ! FLAGS ! DESCRIPTOR BLOCK !
; !-------------------------------------------------------!
; ! DATA FOR SPECIFIC FUNCTION !
; !-------------------------------------------------------!
; ! POINTER TO HELP TEXT FOR FIELD !
; !-------------------------------------------------------!
; ! POINTER TO DEFAULT STRING FOR FIELD !
; +-------------------------------------------------------+
; ! SPECIAL ACTION ROUTINE FOR THIS PDB !
; !-------------------------------------------------------!
; ! PDB DEFAULT FILLING ROUTINE !
; !-------------------------------------------------------!
; ! ERROR ROUTINE !
; !-------------------------------------------------------!
; ! CHAIN POINTER TO LINKED PDB'S !
; !=======================================================!
SUBTTL PDBDEF - PDBDEF MACRO DEFINITION
; THE FORM OF THE PDBDEF MACRO CALL IS:
;PDBDEF (TYP,FLGS,DATA,HLPM,DEFM,LST,NXT,ERRTN,RTN,DEFR)
; ARGUMENTS TO THE PDBDEF MACRO ARE:
;
;
; TYP TYPE OF FDB, IE. .CMKEY
; FLGS FUNCTION SPECIFIC FLAGS
; DATA FUNCTION SPECIFIC DATA
; HLPM BYTE POINTER FOR HELP TEXT
; DEFM POINTER TO DEFAULT
; LST POINTER TO ALTERNATE FDB
; NXT PTR TO NEXT FDB (OPTIONAL FOR TYPE .CMKEY OR .CMSWI)
; ERRTN ROUTINE IF AN ERROR IS GOTTEN POINTING TO THIS PDB
; RTN SPECIAL ACTION ROUTINE FOR THIS PDB
; DEFR SPECIAL ROUTINE TO FILL IN DEFAULTS FOR THIS PDB
DEFINE PDBDEF(TYP,FLGS,DATA,HLPM,DEFM,LST,NXT,ERRTN,RTN,DEFR),<
..XX==<FLD(TYP,CM%FNC)>+FLGS+<Z LST> ;;DEFINE .CMFNP WORD OF COMND FDB
IFNB <HLPM>,<..XX=..XX!CM%HPP> ;;IF HELP TEXT, INCLUDE FLAG BIT
IFNB <DEFM>,<..XX=..XX!CM%DPP> ;;IF DEFAULT TEXT, INCLUDE FLAG BIT
EXP ..XX ;;ASSEMBLE THE .CMFNP WORD
IFNB <DATA>,<EXP DATA>
IFB <DATA>,<EXP 0>
IFNB <HLPM>,<POINT 7,[ASCIZ \HLPM\]>
IFB <HLPM>,<0>
IFNB <DEFM>,<POINT 7,[ASCIZ \DEFM\]>
IFB <DEFM>,<0>
;;THE REST OF THE DEFINITION IS NOT USED BY THE JSYS BUT ONLY BY THE PARSER
IFB <RTN>,<0>
IFNB <RTN>,<EXP RTN>
IFB <DEFR>,<0>
IFNB <DEFR>,<EXP DEFR>
IFB <ERRTN>,<0>
IFNB <ERRTN>,<EXP ERRTN>
IFB <NXT>,<0>
IFNB <NXT>,<EXP NXT>
>;END OF DEFINITION OF PDBDEF MACRO
SUBTTL PDB -- PARSER DESCRIPTOR BLOCK
;THIS BLOCK DEFINES THE OFFSETS AFTER THE FDB FOR THE PDB
;RELATED ROUTINES.
PB%HDR==0 ;HEADER FOR THE BLOCK
PB.PDB==777777B17 ;OFFSET FOR PDB LENGTH
PB.FDB==777777B35 ;OFFSET FOR FDB LENGTH
.ORG 0
PB%NXT:! BLOCK 1 ;NEXT PDB TO USE
PB%RTN:! BLOCK 1 ;ACTION ROUTINE FOR THE PARSER
PB%ERR:! BLOCK 1 ;ERROR ROUTINE
PB%DEF:! BLOCK 1 ;DEFAILT FILLING ROUTINE
PB%PMT:! BLOCK 1 ;SUB-COMMAND PROMPT STRING ADDR
PB%SIZ:! ;SIZE OF MAXIMUM PDB DATA
.ORG
IFN FTUUOS,< .CMBRK==.CMDEF+1> ;DEFINE THE BREAK FIELD
IFN FTUUOS,< CM%BRK==1B13> ;BREAK BIT FOR THE -10
PDB.SZ==.CMBRK+PB%SIZ
COMMENT \
PDB.FD:! BLOCK .CMDEF+1 ;ALLOCATE SPACE FOR AN FDB
PDB.RT:! BLOCK 1 ;SPECIAL ACTION ROUTINE ADDRESS
PDB.DF:! BLOCK 1 ;DEFAULT FILLING ROUTINE ADDRESS
PDB.ER:! BLOCK 1 ;ERROR MESSAGE ROUTINE ADDRESS
PDB.NX:! BLOCK 1 ;ADDRESS OF PDB TO USE NEXT
PDB.SZ:! ;SIZE OF A PDB
DEPHASE
\;END OF COMMENT
SUBTTL COMMAND FUNCTION MACROS
; THE FOLLOWING FUNCTION SPECIFIC MACROS ARE PROVIDED FOR THE PURPOSE OF
;DEFINING THE PDB COMMAND TREE. THE MACROS AND THEIR SYNTAX IS SHOWN BELOW:
; Where upper case identifies keywords which must be coded as shown
;and lower case identifies variable information which must be provided
;by the programmer, e.g., a symbol which represents the address of a
;block.
; The variable parameters are as follows -
; "next__pdb_address" is the address of the next parser data block to use
;in the parse
; "table__address" is the address of keyword table in TBLUK format
; "radix" is the radix in which the number will be input, in octal
; "help__text" is a string to be output on a ?
; "noise__text" is string representing the noise phrase
; "keyword__list" is an optional list of keywords representing additional
;functions
; where the general form of a keyword parameter is
; KEYWORD (argument)
; the entire list of keywords must be enclosed by angle brackets "<", ">"
;and the keyword elements are separated blanks or a comma
; the valid keywords are
;
; $DEFAULT (default__string)
;
; $PDEFAULT (default__address)
;
; $ALTERNATE (alternate__pdb)
;
; $NEXT (next__pdb__address)
;
; $ERROR (error__routine)
;
; $ERRPDB (next_pdb)
;
; $ACTION (special__action__routine)
;
; $PREFILL (default__filling__routine)
; EXAMPLE:
; $KEY (NOIPDB,KYTBL1,<$ACTION(CHKIT)>)
;
;; $KEY (next__pdb__address,table__address,keyword__list)
;
;; $KEYDSP (table__address,keyword__list)
;
;; $NUMBER (next__pdb__address,radix,help__text,keyword__list)
;
;; $DIGIT (next__pdb__address,radix,help__text,keyword__list)
;
;; $NOISE (next__pdb__address,noise__text,keyword__list)
;
;; $SWITCH (next__pdb__address,table__address,keyword__list)
;
;; $IFILE (next__pdb__address,help__text,keyword__list)
;
;; $OFILE (next__pdb__address,help__text,keyword__list)
;
;; $FIELD (next__pdb__address,help__text,keyword__list)
;
;; $CRLF (,keyword__list)
;
;; $DIR (next__pdb__address,keyword__list)
;
;; $USER (next__pdb__address,keyword__list)
;
;; $COMMA (next__pdb__address,keyword__list)
;
;; $INIT (next__pdb__address,keyword__list)
;
;; $FLOAT (next__pdb__address,help__text,keyword__list)
;
;; $DEV (next__pdb__address,keyword__list)
;
;; $CTEXT (next__pdb__address,help__text,keyword__list)
;
;; $DATE (next__pdb__address,keyword__list)
;
;; $TIME (next__pdb__address,keyword__list)
;
;; $TAD (next__pdb__address,keyword__list)
;
;; $QUOTE (next__pdb__address,help__text,keyword__list)
;
;; $TOKEN (next__pdb__address,token__character,keyword__list)
;
;; $NODNM (next__pdb__address,help__text,keyword__list)
;
;; $ACCOUNT (next__pdb__address,help__text,keyword__list)
;
;; $UQSTR (next__pdb__address,BRKSET,help__text,keyword__list)
; THE FOLLOWING SUPPORT MACROS ARE DEFINED TO ALLOW THE USER TO DEFINE THE
;KEYWORD AND SWITCH TABLES USED BY THE KEYWORD AND SWITCH PDB'S:
;
;; DSPTAB (next__pdb__address,user__code,keyword__entry,[flags])
;
;; KEYTAB (user__code,keyword__entry)
;
;; $STAB
;
;; $ETAB
;
DEFINE $TYPE (ARG),<.XCREF .%TYPE, .$TYP
DEFINE .$TYP <ARG>
.%TYPE==1>
DEFINE $FLAGS (ARG),<.XCREF .%FLGS, .$FLGS
DEFINE .$FLGS <ARG>
.%FLGS==1>
DEFINE $PDATA (ARG),<.XCREF .%DATA, .$DATA
DEFINE .$DATA <ARG>
.%DATA==1>
DEFINE $HELP (ARG),<
IFDIF <ARG> <>,<.XCREF .%HLPM, .$HLPM
DEFINE .$HLPM <POINT 7,[ASCIZ\ARG\]>
.%HLPM==1>>
DEFINE $AHELP (ARG),<
IFDIF <ARG> <>,<.XCREF .%HLPM, .$HLPM
DEFINE .$HLPM <POINT 7,[ASCIZ\ARG\]>
.%HLPM==-1>>
DEFINE $SBCM (ARG),<.XCREF .%SBCM, .$SBCM
IFDIF <ARG><>,<DEFINE .$SBCM <EXP <ARG>>>
.%SBCM==1
> ;;END $SBCM
DEFINE $DEFAULT (ARG),<
IFDIF <ARG> <>,<.XCREF .%DEFM, .$DEFM
DEFINE .$DEFM <POINT 7,[ASCIZ\ARG\]>
.%DEFM==1>
IFIDN <ARG> <>,<
IF1 <
PRINTX %Null argument in $DEFAULT macro>>>
DEFINE $PDEFAULT (ARG),<.XCREF .%DEFM, .$DEFM
DEFINE .$DEFM <POINT 7,<ARG>>
.%DEFM==1>
DEFINE $ALTERNATE (ARG),<.XCREF .%LST, .$LST
DEFINE .$LST <ARG+1>
.%LST==1>
DEFINE $NEXT (ARG),<.XCREF .%NXT, .$NXT
DEFINE .$NXT <ARG>
.%NXT==1>
DEFINE $ERROR (ARG),<.XCREF .%ERTN, .$ERTN
DEFINE .$ERTN <ARG>
.%ERTN==1>
DEFINE $BREAK (ARG),<.XCREF .%BREA, .$BREA
DEFINE .$BREA <ARG>
.%BREA==1>
DEFINE $ERRPDB (ARG),<.XCREF .%ERTN, .$ERTN
DEFINE .$ERTN <1B0+ARG+1>
.%ERTN==1>
DEFINE $ERRTXT (ARG),<.XCREF .%ERTN, .$ERTN
DEFINE .$ERTN <[MOVEI S2,[ASCIZ\ARG\]
$RETF]>
.%ERTN==1>
DEFINE $ACTION (ARG),<.XCREF .%RTN, .$RTN
DEFINE .$RTN <ARG>
.%RTN==1>
DEFINE $PREFILL (ARG),<.XCREF .%DEFR, .$DEFR
DEFINE .$DEFR <ARG>
.%DEFR==1>
SUBTTL INITIALIZE PARSER MACRO MACROS
;INITIALIZE ALL THE INNER MACROS
;
.XCREF
$TYPE (0)
$FLAGS (0)
$HELP (<>)
$DEFAULT (0)
$ALTERNATE (0)
$NEXT (0)
$ERROR (0)
$BREAK (0)
$ACTION (0)
$PREFILL (0)
.CREF
DEFINE NEXT(FOO),<TEMFDB##>
;***REMOVE THIS DEFINITION
C.SWIT==1B0
DEFINE SHRSWT,<C.SWIT+PDBCPY##>
DEFINE .$RESET <
.XCREF
SALL
XLIST
DEFINE .$TYP <0>
.%TYPE==0
DEFINE .$FLGS <0>
.%FLGS==0
DEFINE .$DATA <0>
.%DATA==0
DEFINE .$HLPM <>
.%HLPM==0
DEFINE .$DEFM <0>
.%DEFM==0
DEFINE .$LST <0>
.%LST==0
DEFINE .$BREA <0>
.%BREA==0
DEFINE .$NXT <0>
.%NXT==0
DEFINE .$ERTN <0>
.%ERTN==0
DEFINE .$RTN <0>
.%RTN==0
DEFINE .$DEFR <0>
.%DEFR==0
DEFINE .$SBCM <0>
.%SBCM==0
.CREF
>;END OF .$RESET
SUBTTL .$BUILD MACRO
;REDEFINE PDB.XX
DEFINE .$BUILD (%FDBL,%PDBL,%PDB,%FLAG) < ;;BUILD A PDB
.XCREF %FDBL, %PDBL, %PDB, %FLAG
.XCREF .%TYPE, .%FLGS, .%DATA, .%HLPM, .%DEFM, .%LST
.XCREF .$TYP, .$FLGS, .$DATA, .$HLPM, .$DEFM, .$LST
.XCREF .%BREA, .%NXT, .%ERTN, .%RTN, .%DEFR, .%SBCM
.XCREF .$BREA, .$NXT, .$ERTN, .$RTN, .$DEFR, .$SBCM
%FLAG==<FLD(.$TYP,CM%FNC)>!.$FLGS!<.$LST> ;;DEFINE .CMFNP WORD OF FDB
IFN <.%BREA>,<%FLAG==%FLAG!CM%BRK> ;; IF BREAK SET IS PROVIDED
IFG <.%HLPM>,<%FLAG==%FLAG!CM%HPP!CM%SDH> ;;IF HELP TEXT, INCLUDE FLAG
;;BIT AND SUPPRESS HELP
IFL <.%HLPM>,<%FLAG==%FLAG!CM%HPP> ;;IF ADDITIONAL HELP TEXT,
;;INCLUDE FLAG BIT ONLY
IFN <.%DEFM>,<%FLAG==%FLAG!CM%DPP> ;;IF DEFAULT, INCLUDE FLAG BIT
%PDB:! <INSVL.(%PDBL,PB.PDB)>!<INSVL.(%FDBL,PB.FDB)> ;PDB, FDB
EXP %FLAG ;;WORD .CMFNP OF THE FDB
EXP .$DATA ;;WORD .CMDAT OF THE FDB
IFN <.%HLPM!.%DEFM!.%BREA>,<
EXP .$HLPM> ;;WORD .CMHLP OF THE FDB
IFN <.%DEFM!.%BREA>,<
EXP .$DEFM> ;;WORD .CMDEF OF THE FDB
IFN <.%BREA>,<
EXP .$BREA> ;;WORD .CMBRK OF THE FDB
%FDBL==.-%PDB ;;LENGTH OF THE FDB
IFN <.%NXT!.%DEFR!.%RTN!.%ERTN!.%SBCM>,<
EXP .$NXT > ;;WORD PDB.NX OF THE PDB
IFN <.%DEFR!.%RTN!.%ERTN!.%SBCM>,<
EXP .$RTN > ;;GENERATE ACTION ROUTINE
IFN <.%DEFR!.%ERTN!.%SBCM>,<
EXP .$ERTN> ;;GENERATE THE ERROR ROUTINE
IFN <.%DEFR!.%SBCM>,<
EXP .$DEFR> ;;GENERATE DEFAULT FILLING ROUTINE
IFN <.%SBCM>,<
EXP .$SBCM> ;;GENERATE SUB-COMMAND PROMPT
%PDBL==.-%PDB ;;LENGTH OF THE WHOLE BLOCK
IF2,<
PURGE .%TYPE, .%FLGS, .%DATA, .%HLPM, .%DEFM, .%LST
PURGE .$TYP, .$FLGS, .$DATA, .$HLPM, .$DEFM, .$LST
PURGE .%BREA, .%NXT, .%ERTN, .%RTN, .%DEFR, .%SBCM
PURGE .$BREA, .$NXT, .$ERTN, .$RTN, .$DEFR, .$SBCM
PURGE %FDBL, %PDBL, %PDB, %FLAG
> ;;END IF2
LIST>;END .$BUILD
SUBTTL PARSER MACROS FOR EACH FUNCTION
DEFINE $KEYDSP (TABLE,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMKEY)
$PDATA (TABLE)
$NEXT (0)
IRP ARGLST,<ARGLST>
.$BUILD>
DEFINE $KEY (NXT,TABLE,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMKEY)
$PDATA (TABLE)
$NEXT (NXT)
IRP ARGLST,<ARGLST>
.$BUILD>
DEFINE $NUMBER (NXT,RADIX,HELP,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMNUM)
$PDATA (RADIX)
$HELP (<>)
$NEXT (NXT)
IFIDN <HELP> <>,< IRP ARGLST,<ARGLST>
.$BUILD>
IFDIF <HELP> <>,<
$HELP (HELP)
IRP ARGLST,<ARGLST>
.$BUILD>>
DEFINE $DIGIT (NXT,RADIX,HELP,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMNUX)
$PDATA (RADIX)
$HELP (<>)
$NEXT (NXT)
IFIDN <HELP> <>,< IRP ARGLST,<ARGLST>
.$BUILD>
IFDIF <HELP> <>,<
$HELP (HELP)
IRP ARGLST,<ARGLST>
.$BUILD>>
DEFINE $NOISE (NXT,TEXT,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMNOI)
$PDATA (<POINT 7,[ASCIZ\TEXT\]>)
$NEXT (NXT)
IRP ARGLST,<ARGLST>
.$BUILD>
DEFINE $SWITCH (NXT,TABLE,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMSWI)
$PDATA (TABLE)
$NEXT (NXT)
IRP ARGLST,<ARGLST>
.$BUILD>
DEFINE $SWIDSP (TABLE,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMSWI)
$PDATA (TABLE)
$NEXT (0)
IRP ARGLST,<ARGLST>
.$BUILD>
DEFINE $IFILE (NXT,HELP,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMIFI)
$HELP (<>)
$NEXT (NXT)
IFIDN <HELP> <>,< IRP ARGLST,<ARGLST>
.$BUILD>
IFDIF <HELP> <>,<
$HELP (HELP)
IRP ARGLST,<ARGLST>
.$BUILD>>
DEFINE $OFILE (NXT,HELP,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMOFI)
$NEXT (NXT)
$HELP (<>)
IFIDN <HELP> <>,< IRP ARGLST,<ARGLST>
.$BUILD>
IFDIF <HELP> <>,<
$HELP (HELP)
IRP ARGLST,<ARGLST>
.$BUILD>>
DEFINE $FILE (NXT,HELP,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMFIL)
$HELP (<>)
$NEXT (NXT)
IFIDN <HELP> <>,< IRP ARGLST,<ARGLST>
.$BUILD>
IFDIF <HELP> <>,<
$HELP (HELP)
IRP ARGLST,<ARGLST>
.$BUILD>>
DEFINE $FIELD (NXT,HELP,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMFLD)
$NEXT (NXT)
$HELP (<>)
IFIDN <HELP> <>,< IRP ARGLST,<ARGLST>
.$BUILD>
IFDIF <HELP> <>,<
$HELP (HELP)
IRP ARGLST,<ARGLST>
.$BUILD>>
DEFINE $CRLF (ARGLST),<
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMCFM)
IRP ARGLST,<ARGLST>
.$BUILD>
DEFINE $DIR (NXT,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMDIR)
$NEXT (NXT)
IRP ARGLST,<ARGLST>
.$BUILD>
DEFINE $USER (NXT,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMUSR)
$NEXT (NXT)
IRP ARGLST,<ARGLST>
.$BUILD>
DEFINE $COMMA (NXT,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMCMA)
$NEXT (NXT)
IRP ARGLST,<ARGLST>
.$BUILD>
DEFINE $SUBCM (NXT,PROMPT,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$NEXT (NXT)
$TYPE (.CMINI)
$SBCM (PROMPT)
IRP ARGLST,<ARGLST>
.$BUILD>
DEFINE $INIT (NXT,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$NEXT (NXT)
$TYPE (.CMINI)
IRP ARGLST,<ARGLST>
.$BUILD>
DEFINE $FLOAT (NXT,HELP,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMFLT)
$HELP (<>)
$NEXT (NXT)
IFIDN <HELP> <>,< IRP ARGLST,<ARGLST>
.$BUILD>
IFDIF <HELP> <>,<
$HELP (HELP)
IRP ARGLST,<ARGLST>
.$BUILD>>
DEFINE $DEV (NXT,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMDEV)
$NEXT (NXT)
IRP ARGLST,<ARGLST>
.$BUILD>
DEFINE $CTEXT (NXT,HELP,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMTXT)
$HELP (<>)
$NEXT (NXT)
IFIDN <HELP> <>,< IRP ARGLST,<ARGLST>
.$BUILD>
IFDIF <HELP> <>,<
$HELP (HELP)
IRP ARGLST,<ARGLST>
.$BUILD>>
DEFINE $DATE (NXT,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMTAD)
$PDATA (CM%IDA)
$NEXT (NXT)
IRP ARGLST,<ARGLST>
.$BUILD>
DEFINE $TIME (NXT,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMTAD)
$PDATA (CM%ITM)
$NEXT (NXT)
IRP ARGLST,<ARGLST>
.$BUILD>
DEFINE $TAD (NXT,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMTAD)
$PDATA (<CM%IDA!CM%ITM>)
$NEXT (NXT)
IRP ARGLST,<ARGLST>
.$BUILD>
TOPS10<
DEFINE $FTAD (NXT,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMTAD)
$PDATA (<CM%IDA!CM%ITM!CM%FUT>)
$NEXT (NXT)
IRP ARGLST,<ARGLST>
.$BUILD>
> ; End of TOPS10
DEFINE $QUOTE (NXT,HELP,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMQST)
$HELP (<>)
$NEXT (NXT)
IFIDN <HELP> <>,< IRP ARGLST,<ARGLST>
.$BUILD>
IFDIF <HELP> <>,<
$HELP (HELP)
IRP ARGLST,<ARGLST>
.$BUILD>>
DEFINE $UQSTR (NXT,BRKSET,HELP,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMUQS)
$HELP (<>)
$NEXT (NXT)
$PDATA (BRKSET)
IFIDN <HELP> <>,< IRP ARGLST,<ARGLST>
.$BUILD>
IFDIF <HELP> <>,<
$HELP (HELP)
IRP ARGLST,<ARGLST>
.$BUILD>>
DEFINE $NODNM (NXT,HELP,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMNOD)
$HELP (<>)
$NEXT (NXT)
IFIDN <HELP> <>,< IRP ARGLST,<ARGLST>
.$BUILD>
IFDIF <HELP> <>,<
$HELP (HELP)
; $FLAGS (CM%PO)
IRP ARGLST,<ARGLST>
.$BUILD>>
DEFINE $ACCOUNT (NXT,HELP,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMACT)
$HELP (<>)
$NEXT (NXT)
IFIDN <HELP> <>,< IRP ARGLST,<ARGLST>
.$BUILD>
IFDIF <HELP> <>,<
$HELP (HELP)
IRP ARGLST,<ARGLST>
.$BUILD>>
DEFINE $TOKEN (NXT,CHAR,ARGLST) <
.XCREF .$RESET, .$BUILD
.$RESET
$TYPE (.CMTOK)
$PDATA (<POINT 7,[ASCIZ\CHAR\]>)
$NEXT (NXT)
IRP ARGLST,<ARGLST>
.$BUILD>
SUBTTL KEYWORD TABLE MACROS
;DSPTAB - MACRO TO BUILD A DISPATCH TABLE ENTRY
; USED IN CONJUNCTION WITH $KEYDSP MACRO
DEFINE DSPTAB (NXT,CODE,KEY,FLAGS),<
IFB <FLAGS>,<
XWD [ASCIZ\KEY\],[XWD CODE,NXT]>
IFNB <FLAGS>,<
XWD [EXP CM%FW!FLAGS
ASCIZ\KEY\],[XWD CODE,NXT]>
> ;END OF DSPTAB MACRO
;KEYTAB - MACRO TO BUILD A KEYWORD OR SWITCH TABLE ENTRY
; USED IN CONJUNCTION WITH $KEY OR $SWITCH MACRO
DEFINE KEYTAB (CODE,KEY,FLAGS),<
IFB <FLAGS>,<
XWD [ASCIZ\KEY\],CODE>
IFNB <FLAGS>,<
XWD [EXP CM%FW!FLAGS
ASCIZ\KEY\],CODE>
> ;END OF KEYTAB MACRO
;$STAB/$ETAB - MACROS TO DELINEATE START AND END OF KEYWORD TABLE
; USED IN CONJUNCTION WITH DSPTAB AND KEYTAB MACROS
DEFINE $STAB (%X,%Y) <
.XCREF %X, %Y
%X==.
XWD %Y-1,%Y-1
DEFINE $ETAB <.XCREF %X, %Y
%Y==.-%X>>
END