Trailing-Edge
-
PDP-10 Archives
-
bb-d868c-bm_tops20_v4_2020_distr
-
language-sources/batlog.mac
There are 30 other files named batlog.mac in the archive. Click here to see a list.
TITLE BATLOG -- BATCH CONTROLLER LOG FILE HANDLER
SUBTTL Murray Berkowitz 27-Jul-79
;
;
; COPYRIGHT (c) 1975,1976,1977,1978,1979
; DIGITAL EQUIPMENT CORPORATION
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
; AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS
; SOFTWARE OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
; OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE TO
; AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE
; WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
; BY DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
; OF ITS SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY
; DIGITAL.
SEARCH GLXMAC ;GET GALAXY SYMBOLS
PROLOG(BATLOG)
SEARCH QSRMAC ;GET QUASAR SYMBOLS
SEARCH BATMAC ;GET BATCON SYMBOLS
SEARCH ORNMAC ;GET ORION SYMBOLS
;THE FOLLOWING ARE DEFINED EXTERNAL
EXTERNAL ATOKJB ;JOB LOGOUT CODE
EXTERNAL CURTIM ;CURRENT TIME AS TEXT STRING
EXTERNAL CLOS.1 ;CLOSE OUT JOB ROUTINE
EXTERNAL JOBTOT ;TOTAL NUMBE OF JOBS PROCESSED TO DATE
EXTERNAL JIBTXT ;JOB INFO BLOCK ITEXT
SUBTTL TABLE OF CONTENTS
; TABLE OF CONTENTS FOR BATLOG
;
;
; SECTION PAGE
; 1. Murray Berkowitz 20-Mar-79......................... 1
; 2. L$INIT -- LOG FILE INITIALIZATION AND SETUP......... 2
; 3. L$OUTP -- LOG FILE PAGE OUTPUT ROUTINE.............. 3
; 4. L$OUT1 -- OUTPUT CHARACTER IN S1 TO LOG............. 4
; 5. L$OUTC -- OUTPUT CHARACTER INTO BUFFER.............. 4
; 6. L$OPEN -- LOG FILE OPEN ROUTINE..................... 5
; 7. L$OPNE -- LOG FILE OPEN ERROR ROUTINE............... 6
; 8. L$IOER -- LOG FILE I/O ERROR ROUTINE................ 7
; 9. L$NAME -- GENERATE NEW LOG FILE NAME................ 8
; 10. L$PLOG -- PUT A CHARACTER IN LOG WITH FORMATTING.... 9
; 11. L$TIME -- LOG THE TIME ROUTINE...................... 10
; 12. L$IDEN -- LOG THE LINE IDENTIFIER................... 11
; 13. L$TXTL -- LOG TEXT FROM LUUO CALL................... 11
; 14. L$LSTG -- LOG THE STRING IN LOG FILE................ 11
; 15. L$BLNK -- LOG A BLANK LINE.......................... 12
; 16. L$BLK1 -- LOG A BLANK LINE WITHOUT CRLF............. 12
; 17. L$CRLF -- LOG A CARRIAGE RETURN AND LINE-FEED....... 12
; 18. L$CRL2 -- LOG A CRLF AND ADD ANOTHER WITHOUT STAMP.. 12
; 19. L$SIXU -- LOG SIXBIT FROM LUUO...................... 13
; 20. L$LSIX -- LOG SIXBIT ROUTINE........................ 13
; 21. L$LCMA -- LOG A COMMA............................... 14
; 22. L$LCOL -- LOG A COLON............................... 14
; 23. L$CMNT -- LOG A COMMENT TO THE LOG FILE............. 15
; 24. L$2TAB -- LOG 2 TABS TO LOG FILE.................... 15
; 25. L$LTAB -- LOG A TAB TO LOG FILE..................... 15
; 26. L$LPER -- LOG A PERIOD TO LOG FILE.................. 15
; 27. L$CHKP -- CHECKPOINT THE LOG FILE ROUTINE........... 16
; 28. L$LSTP -- LOG THE TIME STAMP AND TYPE............... 17
SUBTTL Revision History
COMMENT \
Jul-27-79 Change L$OUTP to return false instead of aborting
to prevent mixing main stack with context stack and
properly traping the errors
\
SUBTTL L$INIT -- LOG FILE INITIALIZATION AND SETUP
;THIS ROUTINE WILL SETUP A PAGE FOR LOG FILE OUTPUT THAT WILL
;GET OUTPUT TO THE LOG FILE
L$INIT:: $CALL M%GPAG ;GET THE PAGE
MOVEM S1,.JLPAG(R) ;SAVE THE PAGE ADDRESS
MOVEI S2,<1000*5>-2 ;SETUP FIRST TIME COUNT
SKIPA ;SKIP OVER NORMAL SETTING
L$SETO:: MOVEI S2,<1000*5> ;GET NUMBER OF BYTES
MOVE S1,.JLPAG(R) ;GET PAGE ADDRESS
MOVEM S2,.JLPCT(R) ;SAVE THE COUNT
MOVSI S2,(POINT 7,0) ;SETUP BYTE POINTER
TRNN F,FR.LFO ;WAS LOG FILE OPEN YET?
MOVSI S2,(POINT 7,0,13) ;NO..SKIP FIRST TWO BYTES
HRR S2,S1 ;PUT ADDRESS IN POINTER
MOVEM S2,.JLPTR(R) ;SAVE THE POINTER
POPJ P, ;RETURN
SUBTTL L$OUTP -- LOG FILE PAGE OUTPUT ROUTINE
;THIS ROUTINE WILL DUMP THE LOG FILE PAGE TO THE FILE AND
;RESET ALL THE DATA POINTERS
L$OUTP:: TRNE F,FR.LFO ;IS LOG FILE OPEN YET
PJRST OUTP.1 ;YES..JUST DUMP THE BUFFER
PUSHJ P,L$OPEN ;OPEN THE LOG FILE
MOVE S1,.JLJFN(R) ;GET LOG FILE IFN
MOVEI S2,FI.SIZ ;GET FILE SIZE
$CALL F%INFO ;GET SIZE FROM FILE
MOVSI S2,(POINT 7,0) ;MAKE A POINTER
HRR S2,.JLPAG(R) ;PUT PAGE ADDRESS IN POINTER
JUMPE S1,OUTP.0 ;NONE..PROCESS AS NEW FILE
MOVEI S1,CHR.CR ;GET CARRIAGE RETURN
IDPB S1,S2 ;SAVE THE BYTE
MOVEI S1,CHR.FF ;SET UP FORM FEED
IDPB S1,S2 ;SAVE THE BYTE
JRST OUTP.1 ;CONTINUE..OUTPUT THE PAGE
OUTP.0: MOVEI S1,CHR.CR ;SETUP CARRIAGE RETURN
IDPB S1,S2 ;SAVE THE BYTE
MOVEI S1,CHR.LF ;SETUP LINE FEED
IDPB S1,S2 ;SAVE THE BYTE
OUTP.1: TLNE R,RL.NLG ;LOG FILE AVAILABLE
PJRST L$SETO ;SETUP OUTPUT PAGE
MOVE S2,.JLPAG(R) ;GET PAGE ADDRESS IN S2
MOVEI S1,<1000*5> ;GET MAX COUNT
SUB S1,.JLPCT(R) ;SUBTRACT COUNT REMAINING
CAILE S1,<1000*5> ;CHECK IF WITHIN PAGE
MOVEI S1,<1000*5> ;MAKE IT 5000
HRL S2,S1 ;PLACE COUNT IN LEFT HALF
MOVE S1,.JLJFN(R) ;GET THE IFN
$CALL F%OBUF ;DUMP THE BUFFER
SKIPF ;SKIP IF ERROR
PJRST L$SETO ;SETUP PAGE AND RETURN
OUTP.E: $WTO (<Batch Log File Error>,<^I/JIBTXT/^I/LOGERR/>,.JQOBJ(R),<$WTNOD(.JQLOC(R))>)
TLO R,RL.NLG ;NO LOG FILE AVAILABLE
TLZ R,RL.OPR!RL.DIA ;CLEAR SOME POSSIBLE FLAGS
PUSHJ P,L$IOER ;LOG FILE I/O ERROR
$RETF ;RETURN FALSE
SUBTTL L$OUT1 -- OUTPUT CHARACTER IN S1 TO LOG
SUBTTL L$OUTC -- OUTPUT CHARACTER INTO BUFFER
;THIS ROUTINE WILL PLACE A CHARACTER IN THE BUFFER FOR OUTPUT
;AND ADJUST THE COUNTS
;
;CALL : CH/ CHARACTER TO OUTPUT
;
L$OUT1:: MOVE CH,S1 ;PLACE CHARACTER IN CH
L$OUTC:: SOSGE .JLPCT(R) ;DECREMENT COUNT SKIP IF ROOM
JRST OUTC.1 ;NO ROOM..DUMP BUFFER AND CONTINUE
IDPB CH,.JLPTR(R) ;DEPOSIT THE BYTE
$RETT ;RETURN
OUTC.1: PUSHJ P,L$OUTP ;OUTPUT THE PAGE
PJRST L$OUTC ;PUT OUT THE CHARACTER
SUBTTL L$OPEN -- LOG FILE OPEN ROUTINE
;THIS ROUTINE WILL OPEN UP THE LOG FILE FOR THE STREAM
;AND IF THERE IS AN ERROR ATTEMPT TO OPEN A TEMPORARY LOG FILE
;TO BE PRINTED INDICATING THE ERROR TO THE USER
L$OPEN:: MOVEI S1,.JQLFD(R) ;LOG FILE FD
MOVEM S1,FOB.FD+.JLFOB(R) ;SAVE IN FILE OPEN BLOCK
MOVEI S1,7 ;7 BIT BYTES
MOVEM S1,FOB.CW+.JLFOB(R) ;SAVE CONTROL WORD
MOVE S1,.JQLFP(R) ;GET FP PARAMETERS
TXNN S1,FP.SPL ;SPOOL BIT ON
JRST OPEN.1 ;NO..DO IN BEHALF
MOVEI S1,FOB.MZ ;SHORT BLOCK SIZE
JRST OPEN.2 ;CONTINUE LOG FILE OPEN
OPEN.1:
IFN FTUUOS,<
MOVE S1,.JQPPN(R) ;GET USERS PPN IN BEHALF
MOVEI S2,0 ;0 FOR CONSISTENCY
>;END FTUUOS
IFN FTJSYS,<
HRROI S1,.JQNAM(R) ;USERS NAME
HRROI S2,.JQCON(R) ;CONNECTED DIRECTORY
>;END FTJSYS
MOVEM S1,FOB.US+.JLFOB(R) ;SAVE USER FIELD
MOVEM S2,FOB.CD+.JLFOB(R) ;SAVE CONNECTED DIRECTORY(-20)
MOVEI S1,FOB.SZ ;GET FILE OPEN BLOCK SIZE
MOVX T1,EQ.PRV ;GET PRIVILEGE FLAG
TDNE T1,.JQJBB+JIB.SQ(R) ;WAS IT SET?
MOVEI S1,FOB.MZ ;USE MINIMUM SIZE
OPEN.2: MOVEI S2,.JLFOB(R) ;ADDRESS OF BLOCK
SKIPE T1,.JCHRQ(R) ;SEEN BEFORE?
JRST OPEN.3 ;YES..OPEN WITH APPEND
GETLIM T1,.JQLIM(R),BLOG ;GET BATCH LOG FILE DATA
CAIN T1,%BSCDE ;WAS IT SUPERCEDE
JRST OPEN.5 ;DO SUPERCEDE OPEN
OPEN.3: $CALL F%AOPN ;OPEN THE FILE
OPEN.4: JUMPF L$OPNE ;LOG FILE ERROR
MOVEM S1,.JLJFN(R) ;SAVE IFN FOR LOG FILE
TRO F,FR.LFO ;LOG FILE NOW OPEN
IFN FTJSYS,<
MOVX S2,FI.CHN ;GET THE JFN
PUSHJ P,F%INFO ;GET THE VALUE
HRROI S2,.JQACT(R) ;GET THE ACCOUNT STRING
SACTF ;SET THE ACCOUNT FOR USER
JFCL ;IGNORE ANY ERRORS FOR NOW ***
>;END FTJSYS
POPJ P, ;RETURN
OPEN.5: $CALL F%OOPN ;DO SUPERCEDE OPEN
JRST OPEN.4 ;CHECK THE RETURNS
SUBTTL L$OPNE -- LOG FILE OPEN ERROR ROUTINE
;THIS ROUTINE WILL PROCESS LOG FILE OPEN ERRORS
L$OPNE:: TROE F,FR.LFE ;LOG FILE ERROR OCCUR YET
JRST OPNE.1 ;YES,,EXIT NOW
$WTO (<Batch Log File Open Error>,<^I/JIBTXT/^I/LOGERR/
A Temporary Log File will be Created, Printed, and Deleted
for This User. The Job will be Canceled.>,.JQOBJ(R),<$WTNOD(.JQLOC(R))>)
MOVX S1,E.LFOE ;LOG FILE OPEN ERROR
MOVEM S1,.JERRO(R) ;SAVE ERROR CODE
TLO F,FL.ERR ;ERROR BIT SET
PUSHJ P,L$CMNT ;LOG A COMMENT LINE
$TEXT (L$OUT1,<? -- Batch Log File Open Error --
^I/LOGERR/>)
PUSHJ P,L$NAME ;FIND LOG NAME...NEW NAME
JUMPF OPNE.1 ;ERROR IN SPOOL OR 3,3..EXIT
MOVX S1,<FP.DEL!FP.SPL> ;GET DELETE BIT AND SPOOL BIT
IORM S1,.JQLFP(R) ;SAVE IN FILE FP
PUSHJ P,L$OPEN ;TRY TO OPEN FILE
PUSHJ P,L$OUTP ;DUMP THE CURRENT DATA
$TEXT (L$OUT1,< A Temporary Log File ^F/.JQLFD(R)/
Will be Created Printed and Deleted.>)
PUSHJ P,L$BLK1 ;END AND ADD BLANK LINE
TLZ R,RL.OPR!RL.DIA ;CLEAR SOME POSSIBLE FLAGS
PUSHJ P,ATOKJB ;LOG OUT THE JOB****
MOVEI S1,%EQOLG ;OUTPUT LOG FILE
STOLIM S1,.JQLIM(R),OUTP ;RESET THE VALUE
PJRST CLOS.1 ;AND DISMISS IT
OPNE.1: $WTO (<Batch Log File Error>,<^I/JIBTXT/^I/FNDLMS/>,.JQOBJ(R),<$WTNOD(.JQLOC(R))>)
OPNE.2: TLZ R,RL.OPR!RL.DIA ;CLEAR SOME POSSIBLE FLAGS
PUSHJ P,L$IOER ;LOG FILE I/O ERROR
PUSHJ P,ATOKJB ;LOG OUT THE JOB****
PJRST CLOS.1 ;KILL THE JOB
FNDLMS: ITEXT (<Log Error Recovery Failed
^I/LOGERR/
-- JOB CANCELED -->)
LOGERR:: ITEXT (<^E/[-1]/ FOR ^F/.JQLFD(R)/>)
IFN FTJSYS,<
BATNAM: ASCIZ /PS:<SPOOL>BATERR/
>;END FTJSYS
SUBTTL L$IOER -- LOG FILE I/O ERROR ROUTINE
;THIS ROUTINE WILL SETUP ERROR CODE FOR USER AND OPERATOR
L$IOER:: MOVX S1,E.LFIO ;SET LOG FILE I/O ERROR
MOVEM S1,.JERRO(R) ;SAVE THE CODE FOR END MESSAGE
TLO F,FL.ERR ;MARK ERROR CODE SET
PUSHJ P,L$CMNT ;LOG THE COMMENT LINE
$TEXT (L$OUT1,<? -- Batch Log File I/O Error --
^I/LOGERR/>)
PUSHJ P,L$BLK1 ;LOG A BLANK LINE
POPJ P, ;RETURN
SUBTTL L$NAME -- GENERATE NEW LOG FILE NAME
;THIS ROUTINE WILL GENERATE A LOG FILE NAME IN THE
;SPOOL AREA FOR THE SYSTEM
IFN FTUUOS,<
L$NAME: MOVX S1,FSSSTR ;GET STRUCTURE NAME OF SPOOL AREA
MOVEM S1,.JQLFD+.FDSTR(R) ;SAVE IN STRUCTURE WORD
MOVX S1,%LDQUE ;GET PPN OF SPOOL AREA
GETTAB S1, ;OBTAIN VALUE
JRST .RETF ;BAD RETURN EXIT
MOVEM S1,.JQLFD+.FDPPN(R) ;SAVE PPN OF AREA
MOVE S1,[POINT 6,.JQLFD+.FDNAM(R)];NAME POINTER
MOVEM S1,.JQBYT(R) ;SAVE BYTE POINTER
$CALL I%NOW ;GET CURRENT TIME
$TEXT (FILNAM,<B^D4R0/S1,FILEMK/^D1R0/.JQSTR(R)/LOG^A>)
MOVX S1,FDMSIZ ;GET MINIMUM SIZE FD(NO PATH)
STORE S1,.JQLFD+.FDLEN(R),FD.LEN ;SAVE NEW LENGTH
SETZM .JQLFD+.FDPAT(R) ;CLEAR FIRST WORD OF SFD TO BE SAFE
$RETT ;GIVE GOOD RETURN
>;END FTUUOS
IFN FTJSYS,<
L$NAME: HRLI S2,(POINT 7,0) ;MAKE A BYTE POINTER
HRRI S2,.JQLFD+1(R) ;GET THE START OF FD
MOVEM S2,.JQBYT(R) ;SAVE BYTE POINTER
$CALL I%NOW ;GET THE TIME
$TEXT (FILNAM,<^T/BATNAM/-^D/JOBTOT/-^D6R0/S1,FILEMK/.LOG^0>)
HRRZ S1,.JQBYT(R) ;GET ENDING POINTER
SUBI S1,.JQLFD-1(R) ;GET THE LENGTH
STORE S1,.JQLFD(R),FD.LEN ;SAVE THE NEW COUNT
$RETT ;GIVE GOOD RETURN
>;END FTJSYS
FILNAM:
IFN FTUUOS,<
SUBI S1,40 ;CONVERT TO 6 BIT
ANDI S1,77 ;ONLY WANT TO DIGITS
>;END FTUUOS
IDPB S1,.JQBYT(R) ;STORE THE BYTE
$RETT ;RETURN
SUBTTL L$PLOG -- PUT A CHARACTER IN LOG WITH FORMATTING
;THIS ROUTINE WILL ANALYZE THE CHARACTER AND CONVERT CONTROL
;CHARACTERS AND INSERT APPROPRIATE TABS
L$PLOG:: CAIL CH,40 ;IS THIS A CONTROL CHARACTER
JRST PLOG.1 ;NO, OUTPUT AS IS
CAIG CH,CHR.CR ;CODES 011-015 ARE IMAGE OUTPUT ALSO
CAIGE CH,CHR.HT ;LINE PRINTERS KNOW ABOUT THOSE
SKIPA ;NOT ONE OF THOSE, PRINT ^CHAR
JRST PLOG.1 ;OUTPUT THEM AS IMAGE ALSO
HRLM CH,(P) ;SAVE THE ORIGINAL
MOVEI CH,"^" ;GET AN UPARROW
PUSHJ P,PLOG.1 ;OUTPUT IT
HLRZ CH,(P) ;GET THE ORIGINAL
MOVEI CH,100(CH) ;MAKE THE APPROPRIATE CHARACTER
PUSHJ P,PLOG.1 ;AND OUTPUT IT
HLRZ CH,(P) ;GET THE ORIGINAL AGAIN FOR THE CALLER
POPJ P, ;AND RETURN
PLOG.1: TLZN F,FL.CRS ;WAS LAST CHARACTER A CARRIAGE RETURN
JRST PLOG.2 ;NO, JUST OUTPUT IT
CAIG CH,CHR.FF ;CHECK FOR CR NOT FOLLOWED BY VERTICAL MOTION
CAIGE CH,CHR.LF ;SAME CHECK AS BELOW FOR TIME STAMP
SKIPA ;NOT VERTICAL MOTION, OUTPUT 2 TABS
JRST PLOG.2 ;OUTPUT THE MOTION CHARACTER
HRLM CH,(P) ;SAVE THE CHARACTER ON THE STACK
PUSHJ P,L$2TAB ;OUTPUT 2 TABS
HLRZ CH,(P) ;RESTORE THE CHARACTER AND OUTPUT IT
PLOG.2: SKIPE .JRTIM(R) ;NEED A TIME STAMP
PUSHJ P,L$LSTP ;YES, DO IT
PLOG.3: CAIN CH,CHR.CR ;IS THIS A CARRAIGE RETURN
TLO F,FL.CRS ;YES, MARK IT FOR OVERPRINTING CHECK
PUSHJ P,L$OUTC ;OUTPUT THE CHARACTER
CAIG CH,CHR.FF ;CHECK IF IT WAS VERTICAL PAPER MOTION
CAIGE CH,CHR.LF ;THOSE CAUSE A TIME STAMP
$RETT ;NO MOTION..RETURN
SETOM .JRTIM(R) ;YES,NEXT LINE NEEDS A TIME STAMP
$RETT ;RETURN TRUE
SUBTTL L$TIME -- LOG THE TIME ROUTINE
;THIS ROUTINE WILL PUT TIME STAMP IN THE LOG
L$TIME:: SETZM .JRTIM(R) ;CLEAR THE TIME-STAMP NEEDED FLAG
MOVSI T1,(POINT 7,0) ;MAKE A BYTE POINTER
HRRI T1,CURTIM ;GET THE CURRENT TIME
TIME.1: ILDB CH,T1 ;GET A BYTE
JUMPE CH,.POPJ ;NULL..RETURN
PUSHJ P,L$OUTC ;OUTPUT THE CHARACTER TO LOG
JRST TIME.1 ;FINISH THE TIME STAMP
SUBTTL L$IDEN -- LOG THE LINE IDENTIFIER
SUBTTL L$TXTL -- LOG TEXT FROM LUUO CALL
SUBTTL L$LSTG -- LOG THE STRING IN LOG FILE
;THESE ROUTINES WILL PUT A STRING IN THE LOG FILE
L$IDEN:: SKIPN .JRTIM(R) ;NEED TO END THE PREVIOUS LINE?
PUSHJ P,L$CRLF ;LOG A CRLF TO LOG
PUSHJ P,L$TIME ;LOG THE TIME
L$TXTL:: HRR T1,.JBUUO## ;SETUP FOR UUO
L$LSTG: HRLI T1,(POINT 7,0) ;SETUP THE POINTER
LSTG.1: ILDB CH,T1 ;GET A BYTE
JUMPE CH,.POPJ ;ZERO..RETURN
PUSHJ P,L$OUTC ;OUTPUT THE BYTE
JRST LSTG.1 ;GET NEXT BYTE
SUBTTL L$BLNK -- LOG A BLANK LINE
SUBTTL L$BLK1 -- LOG A BLANK LINE WITHOUT CRLF
SUBTTL L$CRLF -- LOG A CARRIAGE RETURN AND LINE-FEED
SUBTTL L$CRL2 -- LOG A CRLF AND ADD ANOTHER WITHOUT STAMP
L$BLNK:: SKIPN .JRTIM(R) ;NEED TO END THE PREVIOUS LINE?
L$CRL2:: PUSHJ P,L$CRLF ;OUTPUT A CR-LF
L$BLK1:: SETZM .JRTIM(R) ;CLEAR FLAG TO ADD ANOTHER ONE
L$CRLF:: MOVEI CH,CHR.CR ;THE CARRIAGE RETURN
PUSHJ P,L$PLOG ;OUTPUT IT
MOVEI CH,CHR.LF ;AND THE LINE FEED
PJRST L$PLOG ;AND EXIT THROUGH PUTLOG
SUBTTL L$SIXU -- LOG SIXBIT FROM LUUO
SUBTTL L$LSIX -- LOG SIXBIT ROUTINE
;THIS ROUTINE WILL OUTPUT SIXBIT TO THE LOG FILE
L$SIXU:: MOVE T1,@.JBUUO## ;SET UP FROM UUO ENTRY
L$LSIX:: MOVE T2,[POINT 6,T1] ;GET BYTE POINTER
LSIX.1: ILDB CH,T2 ;GET THE BYTE
JUMPE CH,.POPJ ;NULL..RETURN
MOVEI CH," "(CH) ;MAKE ASCII
PUSHJ P,L$OUTC ;OUTPUT THE CHARACTER
TLNN T2,770000 ;GOT IT ALL?
POPJ P, ;YES,,RETURN
JRST LSIX.1 ;GET THE NEXT
SUBTTL L$LCMA -- LOG A COMMA
SUBTTL L$LCOL -- LOG A COLON
L$LCMA:: SKIPA CH,[","] ;A COMMA
L$LCOL:: MOVEI CH,":" ;A COLON
JRST L$OUTC ;OUTPUT THE CHARACTERS
SUBTTL L$CMNT -- LOG A COMMENT TO THE LOG FILE
SUBTTL L$2TAB -- LOG 2 TABS TO LOG FILE
SUBTTL L$LTAB -- LOG A TAB TO LOG FILE
SUBTTL L$LPER -- LOG A PERIOD TO LOG FILE
;THIS ROUTINE WILL LOG A COMMENT INTO THE LOG FILE
L$CMNT:: SKIPN .JRTIM(R) ;NEED TO END THE PREVIOUS LINE
PUSHJ P,L$CRLF ;YES, DO IT
SETZM .JRTIM(R) ;NO TIME STAMP NEEDED
L$2TAB:: PUSHJ P,L$LTAB ;OUTPUT A TAB
L$LTAB:: SKIPA CH,[CHR.HT] ;AND ANOTHER ONE
L$LPER:: MOVEI CH,MONCHR ;A PERIOD (OR SOMETHING LIKE THAT)
JRST L$PLOG ;OUTPUT THE PERIOD
SUBTTL L$CHKP -- CHECKPOINT THE LOG FILE ROUTINE
;THIS ROUTINE WILL DUMP THE LOG FILE AND THEN CHECKPOINT IT
;ON ERROR WILL ABORT THE USER
L$CHKP:: TRNN F,FR.LFO ;IS LOG FILE OPEN
PUSHJ P,L$OPEN ;GO OPEN LOG FILE
PUSHJ P,L$OUTP ;DUMP THE DATA
JUMPF .POPJ ;ERROR...RETURN
MOVE S1,.JLJFN(R) ;IFN FOR FILE
$CALL F%CHKP ;CHECKPOINT THE FILE
JUMPF CHKP.1 ;ABORT TRANSACTION
MOVEM S1,.JLUSI(R) ;LOG FILE POINTER
POPJ P, ;RETURN
CHKP.1: $WTO (<Batch Log Error>,<^I/JIBTXT/^I/LOGERR/
JOB BEING CANCELED>,.JQOBJ(R),<$WTNOD(.JQLOC(R))>)
TLO R,RL.NLG ;NO LOG AVAILABLE
PUSHJ P,L$IOER ;LOG THE I/O ERROR
$RETF ;RETURN FALSE
SUBTTL L$LSTP -- LOG THE TIME STAMP AND TYPE
L$LSTP:: PUSH P,CH ;SAVE THE CHARACTER
PUSHJ P,L$TIME ;PUT TIME STAMP IN LOG FILE
MOVEI T1,[ASCIZ/ MONTR /]
TLNN J,JL.UML ;WAS JOB AT MONITOR LEVEL
MOVEI T1,[ASCIZ/ USER /] ;NO, SAY USER MODE
PUSHJ P,L$LSTG ;LOG THE STRING
POP P,CH ;RESTORE CH
POPJ P, ;RETURN
END