Trailing-Edge
-
PDP-10 Archives
-
bb-d868e-bm_tops20_v41_2020_dist_1of2
-
4-1-documentation/lnkmsg.man
There are 11 other files named lnkmsg.man in the archive. Click here to see a list.
APPENDIX B
LINK MESSAGES
This appendix lists all of LINK's messages. (The messages from the
Overlay Handler, which have the OVL prefix, are given in Chapter 5.)
B.1 DESCRIPTION OF MESSAGES
Section B.2 lists LINK's messages. For each message, the last three
letters of the 6-letter code, the level, the severity, and its
medium-length message are given in boldface. Then, in lightface type,
comes the long message.
When a message is issued, the three letters are suffixed to the
letters LNK, forming a 6-letter code of the form LNKxxx.
The level of a message determines whether it will be issued to the
terminal, the log file, or both. You can use the /ERRORLEVEL and
/LOGLEVEL switches to control message output. For some messages an
asterisk (*) is given for the level or severity. This means that the
value is variable, and depends on the conditions that generated the
message.
The severity of a message determines whether the load will be
terminated when the message is issued. Table B-1 lists the severity
codes used in LINK, along with their meanings. The /SEVERITY switch
provides a means for lowering the severity that is considered fatal.
The severity also determines the first character on the message line
printed to the terminal. This character can then be detected with
Batch's error facility. For all informational messages, the character
is [. Warnings use %, and fatal errors use ?.
B-1
LINK MESSAGES
Table B-1
Severity codes
Code Meaning
1-7 Informational; messages of this severity generally
indicate LINK's progress through the load.
8-15 Warning; LINK is able to recover by itself and continue
the load.
16 Warning if timesharing, but fatal and stops the load if
batch.
20 Fatal; LINK can only partially recover and continue the
load. The loaded program may be incorrect. Undefined
symbols cause this action.
24 This is for file access errors. Under batch, this is
fatal and stops the load. Under timesharing, this is a
warning, and LINK prompts for the correct file
specification if possible.
31 Always fatal; LINK stops the load.
The /VERBOSITY switch determines whether the medium-length and long
messages are issued. If you use /VERBOS:SHORT, only the 6-letter
code, the level, and the severity are issued. If you use
/VERBOS:MEDIUM, the medium-length message is also issued. If you use
/VERBOS:LONG, the code, level, severity, medium-length message, and
long message are issued.
Those portions of the medium-length messages enclosed in braces ({ and
}) are optional, and are only printed in appropriate circumstances.
Those portions of the medium-length messages enclosed in square
brackets are filled in at run-time with values pertinent to the
particular error. Table B-2 describes each of these bracketed
quantities.
B-2
LINK MESSAGES
Table B-2
Special Message Segments
[area] The name of one of LINK's internal memory management
areas.
[date] The date on which LINK was run.
[decimal] A decimal number, such as a node number.
[device] A device name.
[file] A file specification.
[label] An internal label in LINK.
[memory] A memory size, such as 17P.
[name] The name of the loaded program or a node in an
overlaid program.
[octal] An octal number, such as a symbol value.
[reason] The reason for a file access failure, one of the
messages from Table B-3.
[switch] The name of a switch associated with the error.
[symbol] The name of a symbol, such as a subroutine or common
block name.
[type] The type or attributes associated with a symbol.
Whenever possible, LINK attempts to indicate the module and file
associated with an error. This information represents the module
currently being processed by LINK, and may not always be the actual
module containing the error. For instance, if LINK detects a
multiply-defined symbol, either value may be the incorrect one. In
this case, LINK reports only the second (and subsequent) redefinition
and the module containing it.
B.2 LIST OF MESSAGES
Beginning on the next page is the complete list of LINK's error
messages.
B-3
LINK MESSAGES
Code Lev Sev Message
ABT 31 31 Load aborted due to %LNKTMA errors, max. /ARSIZE:
needed was [decimal]
You loaded programs containing more ambiguous
subroutine requests than can fit in the tables of one
or more overlay links. You received a LNKARL message
for each ambiguous request, and a LNKTMA message for
each link with too many requests. You can solve this
problem in either of two ways. One is to use the
/ARSIZE switch before the /OVERLAY switch, thus
expanding all the tables. The other is to use the
/ARSIZE switch just before each /LINK switch to
expand the tables separately.
AIC 31 31 Attempt to increase size of {blank common} {common
[symbol]} from [decimal] to [decimal]
{Detected in module [symbol] from file [file]}
FORTRAN common areas cannot be expanded once defined.
Either load the module with the largest definition
first, or use the /COMMON: switch to reserve the
needed space.
AMP 8 8 ALGOL main program not loaded
You loaded ALGOL procedures, but no main program.
The missing start address and undefined symbols will
terminate execution.
ANM 31 31 Address not in memory
LINK expected a particular user address to be in
memory, but it is not there. This is an internal
LINK error. This message is not expected to occur.
If it does, please notify your Software Specialist or
send a Software Performance Report (SPR) to DIGITAL.
ARL 8 8 Ambiguous request in link [decimal] {name [name]} for
[symbol] defined in links [decimal], [decimal], ...
More than one successor link can satisfy a call from
an ancestor link. The ancestor link requests an
entry point that is contained in two or more of its
successors. You should revise your overlay structure
to remove the ambiguity.
If you execute the current load, one of the following
will occur when the ambiguous call is executed:
1. If only one module satisfying the request is in
B-4
LINK MESSAGES
Code Lev Sev Message
memory, that module will be called.
2. If two or more modules satisfying the request are
in memory, the one with the most links of its path in
memory will be called.
3. If no modules satisfying the request are in
memory, the one with the most links of its path in
memory will be called.
If a module cannot be selected by the methods 2 or 3
above, one of the modules will be called at random.
AZW 31 31 Allocating zero words
LINK's memory manager was called with a request for 0
words. This is an internal LINK error. This message
is not expected to occur. If it does, please notify
your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.
B4R 8 8 Bad F40 produced REL file
{Detected in module [symbol] from file [file]}
Either the compiler produced incorrect code or the
.REL file was incorrectly modified. Two possible
causes for the error are: a table is too long (more
than 218 words); or a table that should have paired
words has an odd length. LNKB4R is usually followed
by a fatal error.
CCD 31 31 CPU conflict
{Detected in module [symbol] from file [file]}
You have loaded modules compiled with conflicting CPU
specifications, such as loading a MACRO program
compiled with the statement .DIRECTIVE KA10 and
another compiled with .DIRECTIVE KI10. Recompile the
affected modules with compatible CPU specifications.
CLF 1 1 Closing log file, continuing on file [file]
You have changed the log file specification. The old
log file is closed; further log entries are written
in the new log file.
B-5
LINK MESSAGES
Code Lev Sev Message
CMC 31 31 Cannot mix COBOL-68 and COBOL-74 compiled code
{Detected in module [symbol] from file [file]}
You cannot use COBOL-68 and COBOL-74 files in the
same load. Compile all COBOL programs with the same
compiler and reload.
CMF 31 31 COBOL module must be loaded first
{Detected in module [symbol] from file [file]}
You are loading a mixture of COBOL-compiled files and
other files. Load one of the COBOL-compiled files
first.
CMX 31 31 Cannot mix Extended FORTRAN compiled code with
FORTRAN compiled code
{Detected in module [symbol] from file [file]}
You cannot load modules produced by FORTRAN with
modules produced by Extended FORTRAN. Compile all
FORTRAN modules the same way, then reload.
CNW 31 31 Code not yet written at [label]
You attempted to use an unimplemented feature. This
is an internal LINK error. This message is not
expected to occur. If it does, please notify your
Software Specialist or send a Software Performance
Report (SPR) to DIGITAL.
CSF 1 1 Creating saved file
LINK is generating your executable (EXE) file.
DEB 31 1 [Name] execution
LINK is beginning program execution at the named
debugger.
DLT 38 1 Execution deleted
Though you have asked for program execution, LINK
cannot proceed due to earlier fatal compiler or LINK
errors. Your program is left in memory or in an
executable file.
B-6
LINK MESSAGES
Code Lev Sev Message
DNA 31 31 DDT not available
A monitor call to obtain SYS:UDDT.EXE failed. This
can happen if you have redefined the logical name
SYS: and neglected to include any directory that
contains UDDT.EXE.
DNS 8 8 Device not specified for switch [switch]
You used a device switch (for example, /REWIND,
/BACKSPACE), but LINK cannot associate a device with
the switch. Neither LINK's default device nor any
device you gave with the /DEFAULT switch can apply.
Give the device with or before the switch (in the
same command line).
DRC 8 8 Decreasing relocation counter [symbol] from [octal]
to [octal]
{Detected im module [symbol] from file [file]}
You are using the /SET switch to reduce the value of
an already defined relocation counter. Unless you
know exactly where each module is loaded, code may be
overwritten.
DSC 31 31 Data store to common [symbol] not in link number
[decimal]
{Detected in module [symbol] from file [file]}
You loaded a FORTRAN-compiled module with DATA
statement assignments to a common area. The common
area is already defined in an ancestor link.
Restructure the load so that the DATA statements are
loaded in the same link as the common area to which
they refer.
DSL 31 * Data store to location [octal] not in link number
[decimal]
{Detected in module [symbol] from file [file]}
You have a data store for an absolute location
outside the specified link. Load the module into the
root link.
NOTE
If the location is less than 140, this message has
level 8 and severity 8.
B-7
LINK MESSAGES
Code Lev Sev Message
DSO 31 31 Data statement overflow
{Detected in module [symbol] from file [file]}
Incorrect code has been generated by the F40
compiler. This message is not expected to occur. If
it does, please notify your Software Specialist or
send a Software Performance Report (SPR) to DIGITAL.
DUZ 31 31 Decreasing undefined symbol count below zero
LINK's undefined symbol count has become negative.
This message is not expected to occur. If it does,
please notify your Software Specialist or send a
Software Performance Report (SPR) to DIGITAL.
EAS 31 31 Error creating area AS overflow file [reason] [file]
LINK could not make the ALGOL symbol table on the
disk. You could be over your disk quota, or the disk
could be full or have errors.
ECE 31 31 Error creating EXE file [reason] [file]
LINK could not write the saved file on the disk. You
could be over your disk quota, or the disk could be
full or have errors.
EGD 1 1 Emergency GETSEG done
LINK has expanded its low segment so large that one
of its larger high segments will not now fit in
memory. LINK will attempt to shrink its internal
tables so that the GETSEG will succeed and loading
continue.
EHC 31 31 Error creating area HC overflow file [reason] [file]
LINK could not write your high-segment code on the
disk. You could be over your disk quota, or the disk
could be full or have errors.
EIF 31 31 Error for input file Status [octal] for file [file]
A read error has occurred on the input file. Use of
the file is terminated and the file is released.
B-8
LINK MESSAGES
Code Lev Sev Message
ELC 31 31 Error creating area LC overflow file [reason] [file]
LINK could not write your low-segment code on the
disk. You could be over your disk quota, or the disk
could be full or have errors.
ELF 1 1 End of log file
LINK has finished writing your log file. The file is
closed.
ELN 7 1 End of link number [decimal] {name [name]}
The link is loaded.
ELS 31 31 Error creating area LS overflow file [reason] [file]
LINK could not write your local symbol table on the
disk. You could be over your disk quota, or the disk
could be full or have errors.
EMS 1 1 End of MAP segment
The map file is completed and closed.
EOE 31 31 EXE file output error Status [octal] for file [file]
LINK could not write the saved file on the disk.
EOI 31 31 Error on input Status [octal] for file [file]
An error has been detected while reading the named
file.
EOO 31 31 Error on output Status [octal] for file [file]
An error has been detected while writing the named
file.
EOV 31 31 Error creating overlay file [reason] [file]
LINK could not write the overlay file on the disk.
ESN 31 31 Extended symbol not expected
Long symbol names (more than six characters) are not
implemented. This message is not expected to occur.
If it does, please notify your Software Specialist or
send a Software Performance Report (SPR) to DIGITAL.
B-9
LINK MESSAGES
Code Lev Sev Message
EXS 1 1 EXIT segment
LINK is in the last stages of loading your program
(for example, creating EXE and symbol files,
preparing for execution if requested).
FCD 31 31 F40 confused about data statements
{Detected in module [symbol] from file [file]}
You are loading incorrect F40-compiled code caused by
a source statement of the form
DATA A(I),I=1,4/1,2,3,4/
instead of the form
DATA (A(I),I=1,4)/1,2,3,4/
This message is not expected to occur. If it does,
please notify your Software Specialist or send a
Software Performance Report (SPR) to DIGITAL.
FCF 1 1 Final code fixups
LINK is reading one or both segment overflow files
backwards to perform any needed code fixups. This
may cause considerable disk overhead, but occurs only
if your program is too big for memory.
FEE * * ENTER error [reason] [file]
See Section B.3 for the list of possible long
messages.
FIN 1 1 LINK finished
LINK is finished. Control is passed to the monitor,
or to the loaded program for execution.
FLE * * LOOKUP error [reason] [file]
See Section B.3 for the list of possible long
messages.
FOV 31 31 Cannot overlay F40 compiled code
{Detected in module [symbol] from file [file]}
You cannot load F40-compiled code in an overlay
structure. Recompile with the FORTRAN compiler.
B-10
LINK MESSAGES
Code Lev Sev Message
FRE * * RENAME error [reason] [file]
See Section B.3 for the list of possible long
messages.
FSF 8 8 FORTRAN subroutine not in expected format, /MIXFOR
fixup not done
{Detected in module [symbol] from file [file]}
LINK cannot find a return from this F40-compiled
subroutine. This message is not expected to occur.
If it does, please notify your Software Specialist or
send a Software Performance Report (SPR) to DIGITAL.
FSI 8 8 FORTRAN requires FOROTS, /FORSE switch ignored
You gave the /FORSE switch while loading
FORTRAN-compiled code. LINK ignored the switch and
will use the FORTRAN run-time system.
FSN 31 31 FUNCT. subroutine not loaded
During final processing of your root link, LINK found
that the FUNCT. subroutine was not loaded. This
would cause an infinite recursion if your program
were executed. The FUNCT. subroutine is requested
by the overlay handler, and is usually loaded from a
default system library. Either you prevented
searching of system libraries, or you did not load a
main program from an overlay-supporting compiler into
the root link.
GFE 31 31 GTJFN% JSYS failed for file [file]
While attempting to run your program from the named
file, LINK received an error from the monitor. This
message is not expected to occur. If it does, please
notify your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.
GSE * * GETSEG error [reason] [file]
See Section B.3 for the list of possible long
messages.
B-11
LINK MESSAGES
Code Lev Sev Message
HCL 31 31 High segment code not allowed in an overlay link
{Detected in module [symbol] from file [file]}
You have attempted to load high segment code into an
overlay link other than the root. Any high segment
code in an overlaid program must be in the root.
HSL 31 31 Attempt to set high segment origin too low
{Detected in module [symbol] from file [file]}
You have set the high-segment counter to a page
containing low-segment code. Reload, using the
/SET:.HIGH.:n switch, or (for MACRO programs)
reassemble after changing your TWOSEG pseudo-op.
HTL 31 31 Symbol hash table too large
Your symbol hash table is larger than the maximum
LINK can generate (about 50P). This table size is an
assembly parameter. This message is not expected to
occur. If it does, please notify your Software
Specialist or send a Software Performance Report
(SPR) to DIGITAL.
I4D 31 31 Illegal F40 data code [octal]
{Detected in module [symbol] from file [file]}
Incorrect code has been generated by the F40
compiler. This message is not expected to occur. If
it does, please notify your Software Specialist or
send a Software Performance Report (SPR) to DIGITAL.
I4S 31 31 Illegal F40 sub-block [octal]
{Detected in module [symbol] from file [file]}
Incorrect code has been generated by the F40
compiler. This message is not expected to occur. If
it does, please notify your Software Specialist or
send a Software Performance Report (SPR) to DIGITAL.
I4T 31 31 Illegal F40 table entry [octal]
{Detected in module [symbol] from file [file]}
Incorrect code has been generated by the F40
compiler. This message is not expected to occur. If
it does, please notify your Software Specialist or
send a Software Performance Report (SPR) to DIGITAL.
B-12
LINK MESSAGES
Code Lev Sev Message
IAS 31 31 Error inputting area AS Status [octal] for file
[file]
An error occurred while reading in the ALGOL symbol
table.
ICB 8 8 Invalid chain REL block (type 12) link number [octal]
{Detected in module [symbol] from file [file]}
REL block type 12 (chain), generated by the MACRO
pseudo-op .LINK and .LNKEND, must contain a number
from 1 to 100 (octal) in its first word. The link
word is ignored.
IDM 31 31 Illegal data mode for device [device]
You specified an illegal combination of device and
data mode (for example, terminal and dump mode).
Respecify a legal device.
IHC 31 31 Error inputting area HC Status [octal] for file
[file]
An error occurred while reading in your high-segment
code.
ILC 31 31 Error inputting area LC Status [octal] for file
[file]
An error occurred while reading in your low-segment
code.
ILS 31 31 Error inputting area LS Status [octal] for file
[file]
An error occurred while reading in your local symbol
table.
IMA 8 8 Incremental maps not yet available
The INCREMENTAL keyword for the /MAP: switch is not
implemented. The switch is ignored.
IMI 31 31 Insufficient memory to initialize LINK
LINK needs more memory than is available.
B-13
LINK MESSAGES
Code Lev Sev Message
IMM * 1 [Decimal] included modules missing {from file [file]}
You have requested with the /INCLUDE: switch that
the named modules (if any) be loaded. Specify files
containing these modules.
INS 31 31 I/O data block not set up
LINK attempted a monitor call (for example, LOOKUP,
ENTER) for a channel that is not set up. This is an
internal LINK error. This message is not expected to
occur. If it does, please notify your Software
Specialist or send a Software Performance Report
(SPR) to DIGITAL.
IOV 31 31 Input error for overlay file Status [octal] for file
[file]
An error occurred when reading the overlay file.
IPO 31 31 Invalid polish operator [octal]
{Detected in module [symbol] from file [file]}
You are attempting to load a file containing an
invalid REL block type 11 (polish). This message is
not expected to occur. If it does, please notify
your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.
IPX 31 31 Invalid psect index {for psect [symbol]}
{Detected in module [symbol] from file [file]}
A REL block contains a reference to a nonexistent
psect. This error is probably caused by a fault in
the language translator used for the program. This
error is not expected to occur. If it does, please
notify your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.
IRB 31 31 Illegal REL block type [octal]
{Detected in module [symbol] from file [file]}
The file is not in the proper binary format. It may
have been generated by a translator that LINK does
not recognize, or it may be an ASCII or EXE file.
B-14
LINK MESSAGES
Code Lev Sev Message
IRC 31 31 Illegal relocation counter
{Detected in module [symbol] from file [file]}
One of the new style 1000+ block types has an illegal
relocation counter. This message is not expected to
occur. If it does, please notify your Software
Specialist or send a Software Performance Report
(SPR) to DIGITAL.
IRR 8 8 Illegal request/require block
{Detected in module [symbol] from file [file]}
One of the REL block types 1042 or 1043 is in the
wrong format. This message is not expected to occur.
If it does, please notify your Software Specialist or
send a Software Performance Report (SPR) to DIGITAL.
ISN 31 31 Illegal symbol name [symbol]
{Detected in module [symbol] from file [file]}
The LINK symbol table routine was called with the
blank symbol. This error can be caused by a fault in
the language translator used for the program. This
message is not expected to occur. If it does, please
notify your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.
ISO 31 31 Invalid polish store operator [octal]
{Detected in module [symbol] from file [file]}
You are attempting to load a file containing an
invalid REL block type 11 (polish). This error can
be caused by a fault in the language translator used
for the program. This message is not expected to
occur. If it does, please notify your Software
Specialist or send a Software Performance Report
(SPR) to DIGITAL.
ISP 31 31 Incorrect symbol pointer
There is an error in the global symbol table. This
is an internal LINK error. This message is not
expected to occur. If it does, please notify your
Software Specialist or send a Software Performance
Report (SPR) to DIGITAL.
B-15
LINK MESSAGES
Code Lev Sev Message
ISS 8 8 Insufficient space for symbol table after psect
[symbol] -- table truncated
There is insufficient address space for the symbol
table between the named psect and the next higher one
or the end of the address space. Restructure your
psect layout to allow sufficient room for the symbol
table.
IST 31 31 Inconsistency in switch table
LINK has found errors in the switch table passed from
the SCAN module. This is an internal error. This
message is not expected to occur. If it does, please
notify your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.
ITB 31 31 Invalid text in ASCII block from file [file]
LINK has failed to complete the processing of an
ASCII text REL block from the named file. This is an
internal error. This message is not expected to
occur. If it does, please notify your Software
Specialist or send a Software Performance Report
(SPR) to DIGITAL.
IUU * 31 Illegal user UUO at PC [octal]
LINK's user UUO (LUUO) handler has detected an
illegal UUO. This is an internal error. This
message is not expected to occur. If it does, please
notify your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.
IVC 31 31 Index validation check failed at address [octal]
The range checking of LINK's internal tables and
arrays failed. The address given is the point in a
LINK segment at which failure occurred. This is an
internal error. This message is not expected to
occur. If it does, please notify your Software
Specialist or send a Software Performance Report
(SPR) to DIGITAL.
LDS 1 1 LOAD segment
The LINK module LNKLOD is beginning its processing.
B-16
LINK MESSAGES
Code Lev Sev Message
LFB 1 1 LINK log file begun on [date]
LINK is creating your log file as a result of
defining the logical name LOG:.
LFC 1 1 Log file continuation
LINK is continuing your log file as a result of the
/LOG switch.
LFI 1 1 Log file initialization
LINK is beginning your log file as a result of the
/LOG switch.
LII 8 1 Library index inconsistent, continuing
A REL block type 14 (index) for a MAKLIB or FUDGE2
generated library file is inconsistent. The library
is searched, but the index is ignored.
LIN 1 1 LINK initialization
LINK is beginning its processing by initializing its
internal tables and variables.
LMN 6 1 Loading module [symbol]
LINK is loading the named module.
LNA 8 8 Link name [name] already assigned to link number
[decimal]
You used this name for another link. Specify a
different name for this link.
LNL 8 8 Link number [decimal] not loaded
The link with this number has not yet been loaded.
The /NODE switch is ignored. If you have used link
numbers instead of link names with the /NODE switch,
you may have confused the link numbers. To avoid
this, use link names.
LNM 31 31 Link number [decimal] not in memory
LINK cannot find the named link in memory. This is
an internal error. This message is not expected to
occur. If it does, please notify your Software
Specialist or send a Software Performance Report
B-17
LINK MESSAGES
Code Lev Sev Message
(SPR) to DIGITAL.
LNN 8 8 Link name [name] not assigned
The name you gave with the /NODE switch is not the
name of any loaded link. The switch is ignored.
LNS 31 8 Low segment data base not same size
The length of LINK's low segment differs from the
length stored in the current LINK high segment. This
occurs if some but not all of LINK's EXE files have
been updated after rebuilding LINK from sources.
Update all of LINK's EXE files.
LSM 8 8 /LINK switch missing while loading link number
[decimal] -- assumed
Your use of the /NODE switch shows that you want to
begin a new overlay link, but the current link is not
yet completely loaded. LINK assumes a /LINK switch
immediately preceding the /NODE switch, and loads the
link (without a link name).
LSS 31 1 {No} Library search symbols (entry points)
{[symbol] [octal]
. . . . . . }
The listed symbols and their values (if any) are
those that are library search entry points.
MDS 8 8 Multiply-defined global symbol [symbol]
{Detected in module [symbol] from file [file]}
Defined value = [octal], this value = [octal]
The named module contains a new definition of an
already defined global symbol. The old definition is
used. Make the definitions consistent and reload.
MEF 31 31 Memory expansion failed
LINK cannot expand memory further. All permitted
overflows to disk have been tried, but your program
is still too large for available memory. A probable
cause is a large global symbol table, which cannot be
overflowed to disk.
B-18
LINK MESSAGES
Code Lev Sev Message
MOV 1 1 Moving low segment to expand area [area]
LINK is rearranging its low segment to make more room
for the specified area. Area is one of the
following: AS=ALGOL symbol table, BG=bound global
symbols, DY=dynamic free memory, FX=fixup area,
GS=global symbol table, HC=your high-segment code,
LC=your low-segment code, LS=local symbol tables,
RT=relocation tables.
MPS 1 1 MAP segment
The LINK module LNKMAP is writing a map file.
MRN 1 1 Multiple regions not yet implemented
The REGION keyword for the /OVERLAY: switch is not
implemented. The argument is ignored.
MSN 8 8 Map sorting not yet implemented
Alphabetical or numerical sorting of the map file is
not implemented. The symbols in the map file appear
in the order they are found in the .REL files.
MSR 31 31 /MIXFOR switch required to mix F40 and FORTRAN code
{Detected in module [symbol] from file [file]}
You must use the /MIXFOR switch to load a mixture of
modules compiled by F40 and FORTRAN. The /MIXFOR
switch must precede any file specifications.
MSS 8 8 /MAXCOR: set too small, expanding to [memory]
The current value of MAXCOR is too small for LINK to
operate. You can speed up future loads of this
program by setting the /MAXCOR: switch to this
expanded size at the beginning of the load.
MTB 8 8 /MAXCOR: too big, [memory] used
You are attempting to specify the /MAXCOR: switch so
large that the low segment cannot fit before the high
segment. LINK will use only the core indicated.
B-19
LINK MESSAGES
Code Lev Sev Message
MTS 8 8 /MAXCOR: too small, at least [memory] is required
LINK needs more space than you gave with the /MAXCOR:
switch. Give a new /MAXCOR: switch with at least
the required size.
NBR 31 31 Attempt to position to node before the root
The argument you gave for the /NODE switch would
indicate a link before the root link. (For example,
from a position after the third link in a path, you
cannot give /NODE:-4.)
NEB 8 8 No end block seen
{Detected in module [symbol] from file [file]}
No REL block type 5 (end) was found in the named
module. This will happen if LINK finds two type 6
blocks (name) without an intervening end, or if an
end-of-file is found before the end block is seen.
LINK simulates the missing end block. However, fatal
messages usually follow this, since this condition
usually indicates a bad REL file.
NED 31 24 Non-existent device [device]
You gave a device that does not exist on this system.
Correct your input files and reload.
NPS 8 8 Non-existent psect [symbol] specified for symbol
table
You have specified the name of a psect after which
LINK should append the symbol table, but no psect
with that name was loaded. Load the named psect or
specify an existing psect for the symbols.
NSA 31 1 No start address
Your program does not have a starting address. This
can happen if you neglect to load a main program.
Program execution, if requested, will be suppressed
unless you specified debugger execution.
OAS 31 31 Error outputting area AS Status [octal] for file
[file]
An error occurred while writing out the ALGOL symbol
table.
B-20
LINK MESSAGES
Code Lev Sev Message
OEL 8 8 Output error on log file, file closed, load
continuing {Status [octal] for file [file]}
An error has occurred on the output file. The output
file is closed at the end of the last data
successfully output.
OEM 8 8 Output error on map file, file closed, load
continuing Status [octal] for file [file]
An error has occurred on the output file. The output
file is closed at the end of the last data
successfully output.
OES 8 8 Output error on symbol file, file closed, load
continuing Status [octal] for file [file]
An error has occurred on the output file. The output
file is closed at the end of the last data
successfully output.
OEX 8 8 Output error on XPN file, file closed, load
continuing Status [octal] for file [file]
An error has occurred on the output file. The output
file is closed at the end of the last data
successfully output.
OFD 31 31 OPEN failure for device [device]
An OPEN or INIT monitor call for the specified device
failed. The device may be under another user's
control.
OFN 31 31 Old FORTRAN (F40) module not available
{Detected in module [symbol] from file [file]}
The standard released version of LINK does not
support F40 code.
OFS 31 31 Overlay file must be created on a file structure
Specify a disk device for the overlay file.
OHC 31 31 Error outputting area HC Status [octal] for file
[file]
An error occurred while writing out your high-segment
code.
B-21
LINK MESSAGES
Code Lev Sev Message
OHN 31 31 Overlay handler not loaded
Internal symbols in the overlay handler could not be
referenced. If you are using your own overlay
handler, this is a user error; if not, it is an
internal error. This message is not expected to
occur. If it does, please notify your Software
Specialist or send a Software Performance Report
(SPR) to DIGITAL.
OLC 31 31 Error outputting area LC Status [octal] for file
[file]
An error occurred while writing out your low-segment
code.
OLS 31 31 Error outputting area LS Status [octal] for file
[file]
An error occurred while writing out your local symbol
table.
OMB 31 31 /OVERLAY switch must be first
The /OVERLAY switch must appear before you can use
any of the following switches: /ARSIZE:, /LINK,
/NODE, /PLOT, /SPACE. (It is sufficient that the
/OVERLAY switch appear on the same line as the first
of these switches you use.)
ONS 8 1 Overlays not supported in this version of LINK
LINK handles overlays with its LNKOV1 and LNKOV2
modules. Your installation has substituted dummy
versions of these. You should request that your
installation rebuild LINK with the real LNKOV1 and
LNKOV2 modules.
OOV 31 31 Output error for overlay file Status [octal] for file
[file]
An error has occurred while writing the overlay file.
OS2 1 1 Overlay segment phase 2
LINK's module LNKOV2 is writing your overlay file.
B-22
LINK MESSAGES
Code Lev Sev Message
OSL 8 8 Overlaid program symbols must be in low segment
You have specified /SYMSEG:HIGH or /SYMSEG:PSECT:
when loading an overlay structure. Specify
/SYMSEG:LOW or /SYMSEG:DEFAULT.
PAS 1 1 Area AS overflowing to disk
The load is too large to fit into the allowed memory
and the ALGOL symbol table is being moved to disk.
PBI 8 8 Program break [octal] invalid
{Detected in module [symbol] from file [file]}
The highest address allocated in the named module is
greater than 512P. This is usually caused by
dimensioning large arrays. Modify your programs or
load list to reduce the size of the load.
PCL 8 8 Program too complex to load, saving as file [file]
Your program is too complex to load into memory for
one of the following reasons:
1. There are page gaps between psects (except below
the high segment).
2. There are psects above the origin of the high
segment.
3. Your program will not fit in memory along with
LINK's final placement code.
4. One or more psects has the read-only attribute.
LINK has saved your program as an EXE file on disk
and cleared your user memory. You can use a GET or
RUN command to load the EXE file.
PCX 8 1 Program too complex to load and execute, will run
from file [file]
Your program is too complex to load into memory for
one of the following reasons:
1. There are page gaps between psects (except below
the high segment).
2. There are psects above the origin of the high
segment.
B-23
LINK MESSAGES
Code Lev Sev Message
3. Your program will not fit in memory along with
LINK's final placement code.
4. One or more psects has the read-only attribute.
LINK will save your program as an EXE file on disk
and automatically run it, but the EXE file will not
be deleted.
PEF 31 8 Premature end of file from file [file]
LINK found an end-of-file inside a REL block (that
is, the word count for the block extended beyond the
end-of-file). This error can be caused by a fault in
the language translator used for the program.
PHC 1 1 Area HC overflowing to disk
The load is too large to fit into the allowed memory
and your high-segment code is being moved to disk.
PLC 1 1 Area LC overflowing to disk
The load is too large to fit into the allowed memory
and your low-segment code is being moved to disk.
PLS 1 1 Area LS overflowing to disk
The load is too large to fit into the allowed memory
and your local symbol tables are being moved to disk.
POT 1 1 Plotting overlay tree
LINK is creating your overlay tree file.
POV 8 8 Psects [symbol] and [symbol] overlap from address
[octal] to [octal]
The named psects overlap each other in the indicated
range of addresses. If you do not expect this
message, restructure your psect origins with the
/SET:PSECT: switch.
PTL 31 31 Program too long
{Detected in module [symbol] from file [file]}
Your program extends beyond location 777777, which is
the highest location that LINK is capable of loading.
You may be able to make your program fit by moving
psect origins, lowering the high segment origin,
B-24
LINK MESSAGES
Code Lev Sev Message
loading into a single segment, reducing the size of
arrays in your program, or using the overlay
facility.
RBS 31 31 REL block type [octal] too short
{Detected in module [symbol] from file [file]}
The REL block is inconsistent. This may be caused by
incorrect output from a translator (for example,
missing argument for an end block). Recompile the
module and reload.
RED 1 1 Reducing low segment to [memory]
LINK is reclaiming memory by deleting its internal
tables.
RER * 1 {No} Request external references (inter-link entry
points)
{[symbol] [octal]
. . . . . .}
The listed symbols and their values (if any)
represent subroutine entry points in the current
link.
RGS 1 1 Rehashing global symbol table from [decimal] to
[decimal]
LINK is expanding the global symbol table either to a
prime number larger than your /HASHSIZE: switch
requested, or by about 50 percent. You can speed up
future loads of this program by setting /HASHSIZE:
this large at the beginning of the load.
RLC 31 1 Reloc ctr. initial value current value
{[symbol] [octal] [octal]
. . . . . . . . .}
The listed symbols and values represent the current
placement of psects in your address space.
RME 31 * REMAP error{, high segment origin may be incorrect}
The REMAP UUO to place your program's high segment
has failed. This message is not expected to occur.
If it does, please notify your Software Specialist or
send a Software Performance Report (SPR) to DIGITAL.
B-25
LINK MESSAGES
Code Lev Sev Message
RUM 31 31 Returning unavailable memory
LINK attempted to return memory to the memory
manager, but the specified memory was not previously
allocated. This is an internal error. This message
is not expected to occur. If it does, please notify
your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.
SFU 8 8 Symbol table fouled up
There are errors in the local symbol table. Loading
continues, but any maps you request will not contain
control section lengths. This is an internal error.
This message is not expected to occur. If it does,
please notify your Software Specialist or send a
Software Performance Report (SPR) to DIGITAL.
SIF 31 31 Symbol insert failure, non-zero hole found
LINK's hashing algorithms failed; they are trying to
write a new symbol over an old one. You may be able
to load your files in a different order. This is an
internal error. This message is not expected to
occur. If it does, please notify your Software
Specialist or send a Software Performance Report
(SPR) to DIGITAL.
SMP 8 8 SIMULA main program not loaded
You loaded some SIMULA procedures or classes, but no
main program. Missing start address and undefined
symbols will terminate execution.
SNC 31 31 Symbol [symbol] already defined, but not as common
{Detected in module [symbol] from file [file]}
You defined a FORTRAN common area with the same name
as a non-common symbol. You must decide which
definition you want. If you want the common
definition, load the common area first.
SNL 1 1 Scanning new command line
LINK is ready to process the next command line.
B-26
LINK MESSAGES
Code Lev Sev Message
SNP 8 8 Subroutine [symbol] in link number [decimal] not on
path for call from link number [decimal] {name
[name]}
The named subroutine is in a different path from the
calling link. Redefine your overlay structure so
that the subroutine is in the correct path.
SNS 31 31 SITGO not supported
{Detected in module [symbol] from file [file]}
LINK does not support the .REL file format produced
by the SITGO compiler. Load your program by using
SITGO.
SOE 31 31 Saved file output error Status [octal] for file
[file]
An error occurred in outputting the .EXE file.
SRB 8 8 Attempt to set relocation counter [symbol] below
initial value of [octal]
{Detected in module [symbol] from file [file]}
You cannot use the /SET: switch to set the named
relocation counter below its initial value. The
attempt is ignored.
SRP 31 31 /SET: switch required for psect [symbol]
{Detected in module [symbol] from file [file]}
Relocatable psects are not implemented; you must
specify an explicit absolute origin with the
/SET:PSECT: switch for the named psect.
SSN 8 8 Symbol table sorting not yet implemented
Alphabetical or numerical sorting of the symbol table
is not implemented. The symbols appear in the order
they are found.
SST 1 1 Sorting symbol table
LINK is rearranging the symbol table, and if
required, is converting the symbols from the new to
old format as indicated on the /SYMSEG, /SYFILE, or
/DEBUG switch.
B-27
LINK MESSAGES
Code Lev Sev Message
STC 1 1 Symbol table completed
The symbol table has been sorted and moved according
to the /SYMSEG, /SYFILE, or /DEBUG switch.
T13 31 31 LVAR REL block (type 13) not implemented
{Detected in module [symbol] from file [file]}
REL block type 13 (LVAR) is obsolete. Use the MACRO
pseudo-op TWOSEG.
TDS 8 8 Too late to delete initial symbols
LINK has already loaded the initial symbol table. To
prevent this loading, place the /NOINITIAL switch
before the first file specification.
TMA 31 8 Too many ambiguous requests in link [decimal] {name
[name]}, use /ARSIZE:[decimal]
{Detected in module [symbol] from file [file]}
You have more ambiguous subroutine requests
(indicated by LNKARL messages) than will fit in the
table for this link. Continue loading. Your load
will abort at the end with a LNKABT message; if you
have loaded all modules, the message will give the
size of the needed /ARSIZE switch for a reload.
TTF 8 8 Too many titles found
In producing the index for a map file, LINK found
more program names than there are programs. The
symbol table is in error. This is an internal error.
This message is not expected to occur. If it does,
please notify your Software Specialist or send a
Software Performance Report (SPR) to DIGITAL.
UAR 8 8 Undefined assign for [symbol]
{Detected in module [symbol] from file [file]}
The named symbol was referenced in a REL block type
100 (ASSIGN), but the symbol is undefined. This is
generated with the MACRO pseudo-op .ASSIGN. The
assignment is ignored. You should load a module that
defines the symbol.
B-28
LINK MESSAGES
Code Lev Sev Message
UGS * 1 {No} Undefined global symbols
{[symbol] [octal]
. . . . . .}
The listed symbols and their values (if any)
represent symbols not yet defined by any module.
Each value is the first address in a chain of
references for the associated symbol.
If this message resulted automatically at the end of
loading, this is a user error. In this case, the
load will continue, leaving references to these
symbols unresolved.
UNS 31 31 Universal file REL block (type 777) not supported
from file [file]
Extraction of symbols from a MACRO universal file is
not implemented.
URC 31 1 Unknown radix-50 symbol code [octal] [symbol]
{Detected in module [symbol] from file [file]}
In a REL block type 2 (symbols), the first 4 bits of
each word pair contain the Radix-50 symbol code.
LINK found one or more invalid codes in the block.
This error can be caused by a fault in the language
translator used for the program.
USA 8 8 Undefined start address [symbol]
You gave an undefined global symbol as the start
address. Load a module that defines the symbol.
USC 31 8 Undefined subroutine [symbol] called from link number
[decimal] {name [name]}
The named link contains a call for a subroutine you
have not loaded. If the subroutine is required for
execution, you must reload, including the required
module in the link.
USI 8 16 Undefined symbol [symbol] illegal in switch [switch]
You have specified an undefined symbol to a switch
that can only take a defined symbol or a number.
Specify the correct switch value.
B-29
LINK MESSAGES
Code Lev Sev Message
UUA 8 8 Undefined /UPTO: address [symbol]
You gave the named symbol as an argument to the
/UPTO: switch, but the symbol was never defined.
Load a module that defines the symbol, or change your
argument to the /UPTO: switch.
VAL 31 1 Symbol [symbol] [octal] [type]
LINK has printed the specified symbol, its value and
its attributes as requested.
XCT 31 1 [Name] execution
LINK is beginning execution of your program.
ZSV 8 8 Zero switch value illegal
You omitted required arguments for a switch (for
example, /REQUIRE with no symbols). Respecify the
switch.
B-30
LINK MESSAGES
B.3 INDEXED MESSAGES
The following pages list the indexed messages issued with the LINK
messages LNKFEE, LNKFLE, LNKFRE, and LNKGSE. The medium-length
messages in the table are substituted for the [reason] field in the
main messages.
The level and severity of these messages depend on the particular file
access error. Thus, each indexed message includes the level and
severity actually assigned to the main message.
B-31
LINK MESSAGES
Idx Lev Sev Message
0 31 31 (0) Illegal file name
One of the following conditions occurred:
1. The specified file name was illegal.
2. When updating a file, the specified file name did
not match the file being updated.
3. The RENAME monitor call following a LOOKUP
monitor call failed.
0 31 24 (0) file was not found
The named file was not found. Specify an existing
file.
1 31 24 (1) no directory for project-programmer number
The named directory does not exist on the named file
structure, or the project-programmer number given was
incorrect.
2 31 24 (2) protection failure
You do not have sufficient access privileges to use
the named file.
2 31 31 (2) directory full
The directory on the DECtape has no room for the
file. Delete some files from the DECtape or specify
another device.
3 31 24 (3) file was being modified
Another job is currently modifying the named file.
Try accessing the file later.
4 31 24 (4) rename file name already exists
The named file already exists, or a different file
was specified on the ENTER monitor call following a
LOOKUP monitor call.
B-32
LINK MESSAGES
Idx Lev Sev Message
5 31 31 (5) illegal sequence of UUOs
LINK has specified an illegal sequence of monitor
calls (e.g., a RENAME without a preceding LOOKUP or
ENTER monitor call, or a LOOKUP after an ENTER).
This is an internal error. This message is not
expected to occur. If it does, please notify your
Software Specialist or send a Software Performance
Report (SPR) to DIGITAL.
6 31 31 (6) bad UFD or bad RIB
One of the following conditions occurred:
1. A transmission, device or data error occurred
while attempting to read the directory or the RIB of
the named file.
2. A hardware-detected device or data error was
detected while reading the named directory's RIB or
data block.
3. A software-detected data inconsistency error was
detected while reading the named directory's or
file's RIB.
7 31 31 (7) not a saved file
The named file is not a saved file. This message can
never occur and is included only for completeness of
the LOOKUP, ENTER and RENAME error codes. This
message is not expected to occur. If it does, please
notify your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.
10 31 31 (10) not enough memory
The system cannot supply enough memory to use as
buffers or to read in a program. This message can
never occur and is included only for completeness of
the LOOKUP, ENTER and RENAME error codes. This
message is not expected to occur. If it does, please
notify your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.
B-33
LINK MESSAGES
Idx Lev Sev Message
11 31 31 (11) device not available
The named device is currently not available. This
message can never occur and is included only for
completeness of the LOOKUP, ENTER and RENAME error
codes. This message is not expected to occur. If it
does, please notify your Software Specialist or send
a Software Performance Report (SPR) to DIGITAL.
12 31 31 (12) no such device
The named device dies not exist. This message can
never occur and is included only for completeness of
the LOOKUP, ENTER and RENAME error codes. This
message is not expected to occur. If it does, please
notify your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.
13 31 31 (13) not two reloc reg. capability
The machine does not have a two-register relocation
capability. This message can never occur and is
included only for completeness of the LOOKUP, ENTER
and RENAME error codes. This message is not expected
to occur. If it does, please notify your Software
Specialist or send a Software Performance Report
(SPR) to DIGITAL.
14 31 24 (14) no room or quota exceeded
You have exceeded the quota of the named directory,
or the entire capacity of the file structure. Delete
some files, or specify a directory or structure with
sufficient space.
15 31 24 (15) write lock error
The named device is write-locked. Specify a
write-enabled device or ask the operator to
write-enable the named device.
16 31 31 (16) not enough monitor table space
There is not enough internal monitor table space for
the named file. Try the load at a later time.
B-34
LINK MESSAGES
Idx Lev Sev Message
17 1 1 (17) partial allocation only
Because of the named directory's quota or the
available space on the file structure, the total
number of blocks requested could not be allocated. A
partial allocation was given.
20 31 31 (20) block not free on allocation
The block required by LINK is not available for
allocation. This message can never occur and is
included only for completeness of the LOOKUP, ENTER
and RENAME error codes. This message is not expected
to occur. If it does, please notify your Software
Specialist or send a Software Performance Report
(SPR) to DIGITAL.
21 31 31 (21) can't supersede (enter) an existing directory
You have attempted to supercede the named directory.
22 31 31 (22) can't delete (rename) a non-empty directory
You have attempted to delete a directory that is not
empty. This message can never occur and is included
only for completeness of the LOOKUP, ENTER and RENAME
error codes. This message is not expected to occur.
If it does, please notify your Software Specialist or
send a Software Performance Report (SPR) to DIGITAL.
23 31 24 (23) SFD not found
One of the sub-file directories in the named path was
not found.
24 31 24 (24) search list empty
A LOOKUP or ENTER monitor call was performed on
generic device DSK: and the search list is empty.
25 31 24 (25) SFD nested too deeply
You have attempted to create a sub-file directory
nested deeper than the maximum level allowed.
B-35
LINK MESSAGES
Idx Lev Sev Message
26 31 24 (26) no-create on for specified SFD path
No file structure in your job's search list has both
the no-create bit and the write-lock bit equal to
zero, and has the named directory.
27 31 24 (27) segment not on swap space
A GETSEG monitor call was issued from a locked low
segment to a high segment which is not a dormant,
active or idle segment. This message can never occur
and is included only for completeness of the LOOKUP,
ENTER and RENAME error codes. This message is not
expected to occur. If it does, please notify your
Software Specialist or send a Software Performance
Report (SPR) to DIGITAL.
30 31 24 (30) can't update file
A LOOKUP and ENTER monitor call was given to update a
file, but the file cannot be updated for some reason
(e.g., another user is superceding it or the file was
deleted between the time of the LOOKUP and the
ENTER).
31 31 24 (31) low segment overlaps high segment
The end of the low segment is above the beginning of
the high segment.
32 31 31 (32) RUN not allowed when not logged in
An attempt has been made to run a program from a
not-logged-in job. This message can never occur and
is included only for completeness of the LOOKUP,
ENTER and RENAME error codes. This message is not
expected to occur. If it does, please notify your
Software Specialist or send a Software Performance
Report (SPR) to DIGITAL.
33 31 31 (33) file still has outstanding ENQ/DEQ locks
The ENQ/DEQ facility has been used for simultaneous
updating of the named file, but some ENQ/DEQ requests
are still outstanding and the file cannot be closed.
This message can never occur and is included only for
completeness of the LOOKUP, ENTER and RENAME error
codes. This message is not expected to occur. If it
does, please notify your Software Specialist or send
a Software Performance Report (SPR) to DIGITAL.
B-36
LINK MESSAGES
Idx Lev Sev Message
34 31 31 (34) bad EXE file directory format
The named file has a bad EXE format directory. This
message can never occur and is included only for
completeness of the LOOKUP, ENTER and RENAME error
codes. This message is not expected to occur. If it
does, please notify your Software Specialist or send
a Software Performance Report (SPR) to DIGITAL.
35 31 31 (35) EXE format files must have .EXE extension
An attempt has been made to run an EXE-format file
with a non-.EXE extension. EXE format files (those
with an internal directory) must have the extension
.EXE. This message is not expected to occur. If it
does, please notify your Software Specialist or send
a Software Performance Report (SPR) to DIGITAL.
36 31 31 (36) EXE file directory is too big
An attempt has been made to run an EXE-format file
with a directory that is too large for the monitor to
handle. This message can never occur and is included
only for completeness of the LOOKUP, ENTER and RENAME
error codes. This message is not expected to occur.
If it does, please notify your Software Specialist or
send a Software Performance Report (SPR) to DIGITAL.
37 31 31 (37) network capability exceeded for TSK:
The monitor's ability to accept another network
connection has been exceeded.
40 31 31 (40) task is not available
The named task is not available. Specify an existing
task name.
41 31 31 (41) undefined network node for TSK:
You have specified a network node that does not
exist. Wait for the node to come up or specify an
existing network node.
42 31 31 ([decimal]) Unknown cause
This message indicates that a LOOKUP, ENTER or RENAME
monitor call error occurred with an error code larger
in number than the errors LINK knows about. This
message is not expected to occur. If it does, please
B-37
LINK MESSAGES
Idx Lev Sev Message
notify your Software Specialist or send a Software
Performance Report (SPR) to DIGITAL.
B-38