Trailing-Edge
-
PDP-10 Archives
-
bb-ee87b-sb
-
10,7/spear/define.lis
There are 26 other files named define.lis in the archive. Click here to see a list.
00001 !++
00002 !
00003 ! ***** EYE READABLE ERROR FILE FORMATS *****
00004 !
00005 ! This file contains the definitions of the TOPS-10 and TOPS-20
00006 ! error file formats. It is the master field definition source
00007 ! for the SPEAR program. The ITRANS program translates these
00008 ! eye readable definitions into a BLISS library file for use in
00009 ! the SPEAR program.
00010 !
00011 !--
00012
00013 !++
00014 !
00015 ! TOPS-10 and TOPS-20 ERROR.SYS RECORD FORMATS
00016 !
00017 !
00018 !
00019 ! DEFINE.EYE contains descriptions of the format of the system event
00020 ! file and contents of each type of entry recorded by TOPS-10 and TOPS-20.
00021 ! The file is created and appended to by a portion of the monitor and is read
00022 ! by SPEAR. SPEAR considers each entry a separate entity and treats each one
00023 ! separately. The recording program also considers each entry or record
00024 ! separately and appends each to the end of the file. The only exception to
00025 ! this policy is the synchronization word at the start of each block
00026 ! (128 words). This word is a pointer or offset to the start of the first
00027 ! entry in the current block and is used by SPEAR to get back in sync in case
00028 ! of trouble. This word is required because entries may cross block boundaries
00029 ! to conserve disk space.
00030 !
00031 ! Each entry or record in ERROR.SYS is composed of two sections, a header
00032 ! section and a body section. The header section contains the entry type,
00033 ! date and time the event was recorded, the processor serial number that
00034 ! detected the error, and the length of the header and body sections. The
00035 ! body sections contain the various data items that make up the entry. The
00036 ! format of the header section is constant regardless of the entry type.
00037 !
00038 !
00039 ! The body section of each entry conforms to a general block format. The first
00040 ! line of an entry contains the block type ENTRY. The second line contains the
00041 ! entry type, an octal code number, and the block name, used by SPEAR to refer
00042 ! to the block. The next part of the block description can be broken down into
00043 ! columns.
00044 !
00045 ! Item name Word number Field description Comments
00046 ! _________ ___________ _________________ ________
00047 !
00048 ! The item name is the name used by SPEAR to refer to the item. The word
00049 ! number is a decimal number of the position of the item. The field
00050 ! description is the size of the item in bits. Comments may occur as the last
00051 ! field of any line and are marked with an exclamation point.
00052 !
00053 ! The last line of the block contains the word END followed by the type of
00054 ! block being terminated.
00055 !
00056 ! ENTRY blocks may also contain pointers to subblocks called TABLE, WORD_10,
00057 ! or WORD_11. These subblocks contains more specific descriptions of the
00058 ! information in the ENTRY. For example, the disk error entry may contain
00059 ! pointers to the MASSBUS register table.
00060 !
00061 ! ENTRY HEADER FORMAT
00062 !
00063 ! This header is used to describe the contents of each entry.
00064 !
00065 ! HRDCOD See Note 1
00066 !
00067 ! HDRDAT Date and time of entry in Universal Format
00068 !
00069 ! HDRUPT System uptime at entry. LH = No. days, RH = fraction of day
00070 !
00071 ! HDRPSN Processor serial No. where entry was recorded
00072 !
00073 ! Note 1 Bits Description
00074 !
00075 ! HDRCOD 0-8 Event code; tells program how to process this
00076 ! entry. See Note 2 for range of event codes.
00077 !
00078 ! 9-15 Reserved.
00079 !
00080 ! 16 If set, indicates that this entry was extracted
00081 ! from a crash.
00082 !
00083 ! 17 If set, this entry was recorded by TOPS-20.
00084 !
00085 ! 18-23 Header Format Version, presently = 1.
00086 !
00087 ! 24-26 Header Length, presently = 4.
00088 !
00089 ! 27-35 Entry Length excluding header, maximum = 777.
00090 !
00091 !
00092 ! Note 2
00093 ! Event Codes
00094 !
00095 ! All event codes are in the range of 0 to 777 with reservations as described:
00096 !
00097 ! 000 Illegal.
00098 !
00099 ! 1-376 Reserved by DEC for use with SPEAR.
00100 !
00101 ! 400-477 Reserved for customer use with SPEAR.
00102 !
00103 ! 500-577 Reserved by DEC for use with programs other than SPEAR.
00104 !
00105 ! 600-677 Reserved for customer use with programs other than
00106 ! SPEAR.
00107 !
00108 ! 700-777 Reserved for both DEC and customer use with control
00109 ! over the system event file.
00110 !
00111 ! In some cases (mostly for event-file control), only the first word (HDRCOD)
00112 ! is included in the header. This identification is the minimum required for
00113 ! any entry. The current event codes used for file control are as follows:
00114 !
00115 ! 377 The recording program has detected an error in the file
00116 ! and has started using the next sequential event file.
00117 !
00118 ! 775 This is the offset word in the first word of each block
00119 ! of the event file. RH points to the start of the first
00120 ! entry in this block.
00121 !
00122 ! 777 This number signals an end-of-file and tells SPEAR to
00123 ! look for the next file.
00124 !
00125 !--
00126
00127 !++
00128 !
00129 ! TOPS-10 / TOPS-20 HEADER DEFINITIONS
00130 !
00131 !--
00132
00133 HEADER TOPS10 TOPS20
00134 HEADER
00135 HDR_WRD_0 0 0-35 ! Header word 0
00136 ENTRY_TYPE 0 0-8 ! TOPS-10 / TOPS-20 entry type
00137 ! Unused 0 9-14 ! Reserved
00138 RETRIEVE_EXTRACT 0 15 ! Entry extracted by RETRIEVE
00139 CRASH_EXTRACT 0 16 ! Entry extracted from a crash
00140 TOPS20_REC 0 17 ! Entry recorded by TOPS-20
00141 BODY_FORMAT 0 18-20 ! 0 before TOPS-20 v5
00142 ! 1 with TOPS-20 v5
00143 HDR_FORMAT 0 21-23 ! 1 before TOPS-10 v7.02
00144 ! 2 with TOPS-10 v7.02
00145 HDR_LENGTH 0 24-26 ! 4 for Header format 1
00146 ! 5 for Header format 2
00147 ENTRY_LENGTH 0 27-35 ! Length of MAIN entry excluding HEADER
00148 ENTRY_DATE_TIME 1 0-35 ! Date/Time in universal format
00149 ! LH = Days since 17 Nov 1858
00150 ! RH = Fractional part of day
00151 ! TOPS-10 Local reference
00152 ! TOPS-20 GMT reference
00153 SYS_UPTIME 2 0-35 ! Time since the system started in
00154 ! universal format
00155 SYS_SER_NUM 3 0-35 ! System serial number (decimal)
00156 RDFILE_SEQNUM 4 0 ! Sequence # was generated by RDFILE
00157 ! Unused 4 1-8 ! Reserved - 0
00158 SEQUENCE_NUMBER 4 9-35 ! Unique record sequence number
00159 END HEADER
00160
00161 HEADER TOPS10 TOPS20
00162 _HEADER ! Header for secondary buffer
00163 _HDR_WRD_0 0 0-35 ! Header word 0
00164 _ENTRY_TYPE 0 0-8 ! TOPS-10 / TOPS-20 entry type
00165 ! Unused 0 9-14 ! Reserved
00166 _RETRIEVE_EXTRACT 0 15 ! Entry extracted by RETRIEVE
00167 _CRASH_EXTRACT 0 16 ! Entry extracted from a crash
00168 _TOPS20_REC 0 17 ! Entry recorded by TOPS-20
00169 _BODY_FORMAT 0 18-20 ! 0 before TOPS-20 v5
00170 ! 1 with TOPS-20 v5
00171 _HDR_FORMAT 0 21-23 ! 1 before TOPS-10 v7.02
00172 ! 2 with TOPS-10 v7.02
00173 _HDR_LENGTH 0 24-26 ! 4 for Header format 1
00174 ! 5 for Header format 2
00175 _ENTRY_LENGTH 0 27-35 ! Length of MAIN entry excluding HEADER
00176 _ENTRY_DATE_TIME 1 0-35 ! Date/Time in universal format
00177 ! LH = Days since 17 Nov 1858
00178 ! RH = Fractional part of day
00179 ! TOPS-10 Local reference
00180 ! TOPS-20 GMT reference
00181 _SYS_UPTIME 2 0-35 ! Time since the system started in
00182 ! universal format
00183 _SYS_SER_NUM 3 0-35 ! System serial number (decimal)
00184 _RDFILE_SEQNUM 4 0 ! Sequence # was generated by RDFILE
00185 ! Unused 4 1-8 ! Reserved - 0
00186 _SEQUENCE_NUMBER 4 9-35 ! Unique record sequence number
00187 END HEADER
00188
00189 !++
00190 ! The following entries are recorded by TOPS-10 via
00191 ! the DAEMON program. These define the body portion of
00192 ! the entry.
00193 !--
00194
00195 !++
00196 !
00197 ! Reload information recorded by TOPS-10 systems whether or not
00198 ! an error occurred.
00199 !
00200 !--
00201
00202 ENTRY TOPS10
00203 001 SYSTEM_RELOAD_10
00204 SYS_NAME 0 0-35 !System name in ASCIZ (5 words 0:4).
00205 SYS_BUILD_DATE 5 0-35 !System build date in ASCIZ (2 words 5:6).
00206 SYS_STATES_WORD 7 0-35 !Bits indicating software state.
00207 MONITOR_VERSION 8 0-35 !Funny format showing major, minor
00208 !version, and edit number.
00209 CPU_SERIAL_NUMBER 9 0-35 !CPU which reloaded system as opposed
00210 !to CPU logging an error.
00211 WHY_RELOAD_CODE 10 0-35 !Major reason-type supplied by operator
00212 !when reloading. (SIXBIT)
00213 OPERATOR_COMMENTS 11 0-35 !Additional comments on why reloaded.
00214 UNLIKELY_CODE 12 0-17 !Just a 707070 for validity-check.
00215 !Undefined 12 18-34
00216 BIT_PER_PAGE_FLAG 12 35 !Flag for NXM table.
00217 NXM_TAB 13 HEAD-F !Pointer to NXM table.
00218 END ENTRY
00219
00220 !++
00221 !
00222 ! Information from TOPS-10 when a recoverable stopcode is detected.
00223 !
00224 !--
00225
00226 ENTRY TOPS10
00227 002 MONITOR_BUG_DATA_10
00228 SYS_NAME 0 0-35 !System name in ASCIZ (five words 0:4)
00229 SYS_BUILD_DATE 5 0-35 !System build date in ASCIZ (2 words 5:6)
00230 CPU_SERIAL_NUMBER 7 0-35 !CPU which detected error.
00231 MONITOR_VERSION 8 0-35 !Funny format showing major, minor
00232 !version, and edit number.
00233 STOP_BUG_NAME 9 0-35 !Stopcode name in SIXBIT.
00234 JOB_NUMBER 10 0-35 !Job active at time of occurrence.
00235 TERMINAL_NUMBER 11 0-35 ! Terminal of job.
00236 PROGRAM_NAME 12 0-35 ! Name of job user was running.
00237 USER_ID 13 0-35 ! PPN of user.
00238 JOB_STOP_TALLY 14 0-35 !Total number of JOB STOPCDS.
00239 CHECK_TALLY 15 0-35 !Total number of DEBUG STOPCDS.
00240 SAVED_ACS 16 BODY-F !Contents of AC at time of error.
00241 !WORDS 16-31
00242 PI_STATUS 32 0-35 !CONI PI at time of STOPCODE.
00243 END ENTRY
00244
00245 !++
00246 ! Obsolete CPU memory parity error entry for KA10, KI10
00247 !--
00248
00249 ENTRY TOPS10
00250 003 OLD_CPU_MEM_PAR_ERR_10 !Obsolete
00251 CPU_NAME 0 0-35 !Name of device in SIXBIT
00252 TOTAL_SINCE_RELOAD 1 0-35 !Count of NXMs.
00253 SPUR_SINCE_RELOAD 2 0-35 !Count of spurious NXMs.
00254 CONTINUE_COUNT 3 0-35 !Number of continues after MPE halts
00255 PROGRAM_COUNTER 4 0-35 !PC at MPE interrupt
00256 FIRST_CONTENTS 5 0-35 !Of this sweep.
00257 FIRST_ADDRESS 6 0-35 !Of this sweep.
00258 PAR_SWEEP_DATA 7 HEAD-F !pointer to %CCPAR sub-table.
00259 TOP_TEN,_BAD_ADD 8 HEAD-F !Pointer to %CCMPT sub-table.
00260 USER_ID 9 0-35 !PPN of user running at interrupt
00261 PROGRAM_NAME 10 0-35 !In SIXBIT
00262 END ENTRY
00263
00264 !++
00265 ! Obsolete NXM error interrupt for KA10 and KI10
00266 !--
00267
00268 ENTRY TOPS10
00269 004 OLD_CPU_NXM_ERR_10 !Obsolete
00270 CPU_NAME 0 0-35 !Physical CPU name in SIXBIT
00271 TOTAL_SINCE_RELOAD 1 0-35 !Count of NXMs.
00272 SPUR_SINCE_RELOAD 2 0-35 !Count of spurious NXMs.
00273 PROGRAM_COUNTER 3 0-35 !PC at NXM interrupt
00274 JOB_AFFECTED_COUNT 4 0-35 !Number of jobs affected by NXM
00275 FIRST_ADDRESS 5 0-35 !Physical address of NXM
00276 LAST_ADDRESS 4 0-35 !Of this sweep.
00277 RELATIVE_ADDRESS 7 0-35 !Relative address of NXM in segment
00278 TOTAL_THIS_SWEEP 8 0-35 !# of NXM's seen on last sweep
00279 TOTAL_SWEEPS 9 0-35 !Number of sweeps looking for NXM's
00280 ENABLED_COUNT 10 0-35 !# Of user enabled NXM's
00281 ADDRESS_AND 11 0-35 !Logical and of bad addresses.
00282 ADDRESS_OR 12 0-35 !Logical OR or bad addresses.
00283 SEEN_BY_CHANNEL 13 0-35 !Count of NXMs seen by channel.
00284 UNLIKELY_CODE 14 0-17 !Just a 707070 for validity-check.
00285 !Undefined 14 18-34
00286 BIT_PER_PAGE_FLAG 14 35 !Flag for NXM table.
00287 NXM_TAB,_BEFORE_ERR 15 HEAD-F !PTR TO NXM TABLE BEFORE ERROR
00288 NXM_TAB,_AFTER_ERR 16 HEAD-F !PTR TO NXM TABLE AFTER ERROR
00289 TOP_TEN,_BAD_ADD 17 HEAD-F !PTR TO LIST OF NXM ADDRESSES
00290 USER_ID 18 0-35 ! PPN of user.
00291 PROGRAM_NAME 19 0-35 ! Name of job user was running.
00292 END ENTRY
00293
00294 !++
00295 ! Information extracted from a TOPS-10 crash. Names are meaningful
00296 ! to monitor programmers and are left in their original condition.
00297 !--
00298
00299 ENTRY TOPS10
00300 005 EXTRACTED_CRASH_INFO_10
00301 CRASH_STR 0 0-35 !STR name for source of CRASH.EXE
00302 CINSEC 1 0-35 !System wide error count
00303 CINPTR 2 0-35 !Pntr for GETTABS
00304 CINTIM 3 0-35 !Time of day
00305 CINSIZ 4 0-35 !system memory size
00306 CINPOK 5 0-35 !last addr poked
00307 CINLNM 6 0-35 !# jobs logged in
00308 CINTIC 7 0-35 !# ticks per second
00309 CINVER 8 0-35 !monitor version
00310 CINDBG 9 0-35 !DEBUG status word
00311 CINHSO 10 0-35 !Start of monito high seg
00312 CINNWC 11 0-35 !# of words of core
00313 CINUPT 12 0-35 !Uptime in ticks
00314 CINMMS 13 0-35 !Memory size
00315 CINTPE 14 0-35 !Totlal mem par errors
00316 CINSPE 15 0-35 !Total spurious parity errors
00317 CINMPC 16 0-35 !Multiple parity errors
00318 CINMPA 17 0-35 !Last parity addr
00319 CINMPW 18 0-35 !Last parity word
00320 CINMPP 19 0-35 !Last parity PC
00321 CINEPO 20 0-35 !# UNREC EXEC PDL OV
00322 CINEPP 21 0-35 !# RECOVERED EXEC PDL OV
00323 CINERC 22 0-35 !SWAP ERROR COUNT
00324 CINDEL 23 0-35 !DISABLED ARDWARE ERROR COUNT
00325 CINSPC 24 0-35 !LAST STOPCD
00326 CINNDS 25 0-35 !# DEBUG STOPCDS
00327 CINNJS 26 0-35 !# JOB STOPCDS
00328 CINSJN 27 0-35 !LAST STOPCD-JOB NUMBER
00329 CINSPN 28 0-35 !LAST STOPCD-PROGRAM NAME
00330 CINSUU 29 0-35 !LAST STOPCD-UUO
00331 CINSPP 30 0-35 !LAST STOPCD-PPN
00332 CINPAR 31 0-35 !PARITY SUBTABLE
00333 CINPLA 32 0-35 !**HIGHEST ADDR OF PARITY ERROR
00334 CINPMR 33 0-35 !**ADDRES IN SEGMENT OF PAR ERR
00335 CINPTS 34 0-35 !**PAR ERRORS THIS SWEEP
00336 CINPSC 35 0-35 !**#SWEEPS
00337 CINPUE 36 0-35 !**USER ENABLED
00338 CINPAA 37 0-35 !**LOGICAL AND OF ADDR
00339 CINPAC 38 0-35 !**LOGICAL AND OF WORDS
00340 CINPOA 39 0-35 !**LOG OR OF ADDR
00341 CINPOC 40 0-35 !**LOG OR OF DATA
00342 CINPCS 41 0-35 !**COUNT OF SPUR CHANNEL ERROS
00343 CINRSP 42 0-35 !ADDR OF RESPONSE SUBTABLE
00344 CINRSO 43 0-35 !**SUM TTY OUT UUO RES
00345 CINRNO 44 0-35 !**NUM TTY OUT UUO
00346 CINRHO 45 0-35 !**HI-SUM SQ TTY OUT UUO
00347 CINRLO 46 0-35 !**LO-SUM " "
00348 CINRSI 47 0-35 !**SUM TTY INP UUO
00349 CINRNI 48 0-35 !**NUMBER TTY INP UUO
00350 CINRHI 49 0-35 !**HI-SUM SQ TTY INP UUO
00351 CINRLI 50 0-35 !**LO-SUMSQ TTY INP UUO
00352 CINRSR 51 0-35 !**SUM QUANTUM REQ RES
00353 CINRNR 52 0-35 !**NUMBER QUANTUM REQ RES
00354 CINRHR 53 0-35 !**HI-SUM SQ QUANTUM RES
00355 CINRLR 54 0-35 !**LO-SUM SQ QUANTUM REQ RES
00356 CINRSX 55 0-35 !**SUM ONE OF ABOVE
00357 CINRNX 56 0-35 !**NUMBER ONE OF ABOVE
00358 CINRHX 57 0-35 !** HI-SUM SQ ONE OF ABOVE
00359 CINRLX 58 0-35 !**LO-SUM SQ ONE OF ABOVE
00360 CINRSC 59 0-35 !**SUM CPU RES
00361 CINRNC 60 0-35 !**NUMBER CPU RES
00362 CINRHC 61 0-35 !**HI-SUM CPU RES
00363 CINRLC 62 0-35 !**LO-SUM CPU RES
00364 CINUPT 63 0-35 !UPTIME
00365 CINLST 64 0-35 !LOST TIME
00366 CINNUL 65 0-35 !NULTIME
00367 CINOHT 66 0-35 !OVERHEAD TIME IN JIFFIES
00368 CINTUC 67 0-35 !TOTAL UUO COUNT
00369 CINTJC 68 0-35 !TOTAL JOB CONTEXT SWITCH COUNT
00370 CINTNE 69 0-35 !TOTAL NXM
00371 CINSNE 70 0-35 !TOTAL SPUR NXM
00372 CINNJA 71 0-35 !# JOBS AFFECTED LAST NXM
00373 CINMNA 72 0-35 !FIRST ADDR LAST NXM
00374 CINUNI 73 0-35 !CNT OF DISK INFO BLOCKS IN THIS ENTRY
00375 END ENTRY
00376
00377 !++
00378 ! Channel information (DF10) for non-massbus DMA devices
00379 ! (Not supported by SPEAR)
00380 !--
00381
00382 ENTRY TOPS10
00383 006 CHANNEL_ERROR_REPORT_10
00384 DEVICE_NAME 0 0-35 !DEVICE USING CHAN AT ERROR IN SIXBIT
00385 NXM_OVRN_COUNT 1 0-35 !# OF NXM'S AND OVERRUNS FOR THIS CHAN
00386 CHN_MEM_PAR_COUNT 2 0-35 !# OF MPE'S FOR THIS CHAN
00387 CHN_DEV_PAR_COUNT 3 0-35 !# OF DEVICE DPE'S FOR THIS CHAN
00388 INITIAL_CONTROL_WORD 4 0-35 !INITIAL CONTROL WORD
00389 TERMINATION_WORD 5 0-35 !TERMINATION WORD
00390 LAST_CW_MINUS_2 6 0-35 !FINAL CONTROL WD -2
00391 LAST_CW_MINUS_1 7 0-35 !FINAL CONTROL WD -1
00392 LAST_CW 8 0-35 !FINAL CONTROL WD
00393 LAST_DATA_MINUS_2 9 0-35 !LAST DATA WD -2
00394 LAST_DATA_MINUS_1 10 0-35 !LAST DATA WD -1
00395 LAST_DATA 11 0-35 !LAST DATA WD
00396 EXPECTED_TERMINATION 12 0-35 !EXPECTED TERMINATION WD
00397 END ENTRY
00398
00399 !++
00400 ! Time stamp indicating DAEMON has started running
00401 !--
00402
00403 ENTRY TOPS10
00404 007 DAEMON_STARTED_10
00405 DAE_VERSION 0 0-35 !DAEMON version
00406 END ENTRY
00407
00408 !++
00409 ! Information about an error in a non-massbus DMA device in TOPS-10
00410 ! (Not supported in SPEAR). This applies to RP10 and RC10 controllers.
00411 !--
00412
00413 ENTRY TOPS10
00414 010 OLD_DISK_ERR_10
00415 HDENAM 0 0-35 !PHYSICAL UNIT NAME IN SIXBIT
00416 HDEHID 1 0-35 !HOME BLOCK ID(PACK ID)
00417 HDEHCT 2 0-35 !# OF HARD ERRORS ON THIS UNIT
00418 HDESCT 3 0-35 !# OF SOFT ERRORS ON THIS UNIT
00419 HDEECT 4 0-35 !LH = 1B0 IF LATER WON 1ST TIME
00420 ! = 1B1 IF ERROR WAS HARD
00421 ! = 1B2 IF HUNG DEVICE
00422 !RH = # OF RETRIES
00423 HDESOF 5 0-35 !STATUS AT ERROR
00424 CONI_RP10 5 0-35 !Used by SUMMARIZE
00425 HDEERR 6 0-35 !STATUS AFTER RETRY WHICH WON
00426 HDESDI 7 0-35 !DATAI AT ERROR
00427 HDEHDI 8 0-35 !DATAI AFTER RETRY WHICH WON
00428 HDEHBN 9 0-35 !LOGICAL BLOCK NUMBER OF ERROR
00429 HDEMCT 10 0-35 !SOFTWARE DETECTED ERROR CNTS
00430 UNISER 10 0-11 !sat errors
00431 UNIRER 10 12-23 !RIB ERRORS
00432 UNICER 10 24-35 !CHECKSUM ERRORS
00433 HDEPCT 11 0-35 !# OF SEEK INCOMPLETES
00434 HDEHNG 12 0-35 !# OF UNIT HUNGS
00435 UNINTH 12 0-8 !# OF NTHUNG
00436 UNITHU 12 9-17 !# OF THUNG
00437 UNIPHU 12 18-26 !# OF PHUNG
00438 UNISHU 12 27-35 !# OF SHUNG
00439 HDETRC 13 0-35 !# OF BLOCKS READ ON THIS UNIT
00440 HDETWC 14 0-35 !# OF BLOCKS WRITTEN ON THIS UNIT
00441 HDETSC 15 0-35 !# OF SEEKS ON THIS UNIT
00442 HDEDCR 16 0-35 !RESULTS OF A DSKCHR UUO FOR THIS UNIT
00443 CONTROLLER_TYPE 16 21-26 ! As follows
00444 ! 1 -- RC10
00445 ! 2 -- RP10
00446 CONTROLLER_NUMBER 16 27-29
00447 UNIT_TYPE 16 30-32 ! As follows
00448 ! CONTROLLER UNIT TYPE
00449 ! FIELD FIELD
00450 ! 1 0 RD10
00451 ! 1 1 RM10B
00452 ! 2 1 RP02
00453 ! 2 2 RP03
00454 HDELOG 17 0-35 !LOGICAL NAME IN SIXBIT
00455 HDECCT 18 0-35 !LH = # OF SLOTS LEFT IN BAT
00456 ! RH = # OF CHAN TERM WD FAILURES
00457 HDEFIL 19 0-35 !FILE NAME IN SIXBIT
00458 HDEEXT 20 0-35 !FILE EXTENTION IN SIXBIT
00459 HDEUID 21 0-35 !PPN OF USER
00460 HDEPGM 22 0-35 !PROGRAM NAME IN SIXBIT
00461 END ENTRY
00462
00463 WORD_10 TOPS10 ! From above
00464 CONI_RP10
00465 RP10_CTL_PAR 14 ! Control word parity error
00466 RP10_SEC_PAR 15 ! Sector parity error
00467 RP10_MEM_PAR 16 ! Channel data parity error
00468 RP10_WRD_PAR 17 ! Disk word parity error
00469 RP10_PWR_FAL 20 ! Power fail
00470 RP10_SRH_ERR 21 ! Search error
00471 RP10_OVR_RUN 22 ! Overrun (data late)
00472 RP10_NXM 23 ! No such memory
00473 RP10_NOT_RDY 25 ! Not ready
00474 RP10_ILL_WRT 26 ! Illegal write
00475 RP10_ILL_DTO 27 ! Illegal DATAO
00476 RP10_SEC_ADD 28 ! Sector address error
00477 RP10_SUR_ADD 29 ! Surface address error
00478 END WORD_10
00479
00480
00481 !++
00482 !
00483 ! TOPS-10 - ERROR CODE 11 ENTRY - Massbus device error
00484 !
00485 !--
00486
00487 ENTRY TOPS10
00488 011 MASSBUS_ERR_10
00489 DEV_NAM 0 0-35 ! Device name (SIXBIT)
00490 VOL_ID 1 0-35 ! Media identification (SIXBIT)
00491 STR_NAME 2 0-35 ! Structure ID (SIXBIT)
00492 LBN 3 0-35 ! Logical block number
00493 FINAL_ERR_STATE 4 0-35 ! Final error state from TOPS-10
00494 HARD 4 1 ! Hard error - non-recoverable
00495 SUM_HARD 4 1 ! Used by summary to indicate hard/soft
00496 HUNG_DEVICE 4 2 !
00497 ! Unknown 4 3-4 !
00498 CHAN_ADDR 4 5-11 ! Physical controller addr
00499 RH_CHAN_TYPE 4 12-14 ! Controller type (001 = RH10)
00500 CTRL_NUMBER 4 15-17 ! Controller number
00501 RETRY_CNT 4 18-35 ! # of retries performed for this error
00502 CONI_INITIAL 5 0-35 ! Controller status at error
00503 RHCS2_ERR 5 2-17 ! Control and Status 2 for RH11
00504 RHCS1_ERR 5 20-35 ! Control and Status 1 for RH11
00505 CONI_FINAL 6 0-35 ! Controller status at end
00506 SAT_ERRORS 7 0-11 ! SAT error count {
00507 RIB_ERRORS 7 12-23 ! RIB error count { UNIMCT
00508 CHKSM_ERRORS 7 24-35 ! Checksum error count {
00509 SEEK_INC_CNT 8 18-35 ! Seek imcomplete count - UNIPCT
00510 NTHUNG_CNT 9 0-8 ! NTHUNG count {
00511 THUNG_CNT 9 9-17 ! THUNG count { UNIHNG
00512 PHUNG_CNT 9 18-26 ! PHUNG count {
00513 SHUNG_CNT 9 27-35 ! SHUNG count {
00514 FILE_NAME 10 0-35 ! File name (SIXBIT)
00515 ! Unused 11 0-17 !
00516 FILE_NAME_EXT 11 18-35 ! File name extension (SIXBIT)
00517 PROJ_PROG_NO 12 0-35 ! LH - Project number
00518 ! RH - Programmer number
00519 PROGRAM_RUN 13 0-35 ! Program name (SIXBIT)
00520 RH_DATI_TCR_ERR 14 0-35 ! DATAI from RH10 control reg
00521 ! at error time
00522 UBA_STATUS_ERR 14 18-35 ! IF RH11
00523 RH_DATI_TCR_END 15 0-35 ! DATAI from RH10 control reg
00524 ! after last retry
00525 RH_DATI_BAR_ERR 16 0-35 ! DATAI from RH10 block address
00526 ! register at error time
00527 RH_DATI_BAR_END 17 0-35 ! DATAI from RH10 block address
00528 ! register after last retry
00529 MB_DEV, ICE_REG 18 BODY-F ! ***** MB REGISTERS *****
00530 ! 18 - 33
00531 ! Unused 34 0-17 !
00532 LAST_CMD 34 18-35 ! Last command issued to unit
00533 ! before error occurred
00534 ! Unknown 35 0-8 !
00535 BAT_FREE 35 9-17 ! # of free slots left in BAT block
00536 ! 777 = Unknown
00537 ! Unknown 35 18-26 !
00538 CCW_FAIL_CNT 35 27-35 ! # of CCW termination word failures
00539 END ENTRY
00540
00541 !++
00542 !
00543 ! TOPS-10 - ERROR CODE 12 ENTRY - DX20 ERROR
00544 !
00545 !--
00546
00547 ENTRY TOPS10
00548 012 DX20_ERR_10
00549 DEV_NAM 0 0-35 !device name
00550 MEDIAID 1 0-35 !media identification
00551 CHAN_ADDR 2 0-17 ! channel address
00552 CHAN_TYPE 2 18-26 ! CHANNEL TYPE
00553 DEV_TYPE 2 27-35 !device type
00554 ERR_LOCATION 3 0-35 !location of error
00555 !file,,record
00556 FILE_IN_ERROR 3 0-17 !FILE IN ERROR
00557 RECORD_IN_ERROR 3 18-35 ! RECORD IN ERROR
00558 FINAL_ERR_STATE 4 0-35 !final error state
00559 SUM_HARD 4 1
00560 NON_RECOVERABLE 4 1 ! nonrecoverable error
00561 CTRL_ADDR 4 5-11 !physical controller addr
00562 CTRL_TYPE 4 12-14 !controller type
00563 CTRL_NUMBER 4 15-17 !controller number
00564 RETRY_CNT 4 18-35 !retry error count
00565 CONI_INITIAL 5 0-35 !controller status at error
00566 CONI_FINAL 6 0-35 !controller status at end
00567 FRAMES_READ 8 0-35 !no. of frames read
00568 FRAMES_WRITTEN 9 0-35 !no. of frames written
00569 FILE_NAME 10 0-35 !file name
00570 USER 11 0-35 ![P,PN] of user making request
00571 PROGRAM_RUN 12 0-35 !program name
00572 RH_DATI_TCR_ERR 13 0-35 !datai from RH control reg at
00573 !error time
00574 RH_DATI_TCR_END 14 0-35 !datai from RH control reg
00575 !at end of retry
00576 RH_DATI_BAR_ERR 15 0-35 !datai from RH block address
00577 !register at error time
00578 RH_DATI_BAR_END 16 0-35 !datai from RH block address
00579 !register at end of retry
00580 SOFT_READ 17 0-35 ! soft read errors
00581 SOFT_WRITE 18 0-35 ! SOFT WRITE ERROR
00582 HARD_READ 19 0-35 ! HARD READ ERROR
00583 HARD_WRITE 20 0-35 ! HARD WRITE ERROR
00584 FILE_POSITION 21 0-35 !
00585 ERR_RECORD 22 0-35 !
00586 CHAN_LOGOUT_0 23 0-35 !
00587 CHAN_LOGOUT_1 24 0-35 !
00588 CHAN_LOGOUT_2 25 0-35 !
00589 CCW1 26 0-35 !
00590 CCW2 27 0-35 !
00591 MPE_CNT 28 0-35 !
00592 NXM_CNT 29 0-35 !
00593 SOFT_POS_ERR 30 0-35 ! SOFT POSITIONING ERRORS
00594 HARD_POS_ERR 31 0-35 ! HARD POSITIONING ERRORS
00595 OVERRUN_ERR 32 0-35 !
00596 INIT_CNTRL_REG 33 0-35 ! INITIAL CONTROL REGISTER
00597 MICRO_CODE_VER_NO 34 0-35 !
00598 ! ***** POINTERS TO SUB-BLOCKS *****
00599 DX20_MASSBUS_REG 35 MAIN+F ! Pointer to MASSBUS registers
00600 ! +LENGTH,,OFFSET
00601 DX20_DEVICE_REG 36 MAIN+F ! Pointer to device registers
00602 ! +LENGTH,,OFFSET
00603 END ENTRY
00604
00605 !++
00606 ! Information recorded by TOPS-10 when a significant software event
00607 ! takes place. May or may not be an error.
00608 !--
00609
00610 ENTRY TOPS10
00611 014 SOFTWARE_EVENT_10
00612 EVENT_CODE 0 0-35 !EVENT CODE
00613 JOB_NUMBER 1 0-35 !JOB NUMBER
00614 USER_ID 2 0-35 !USERS PPN
00615 PROGRAM_NAME 3 0-35 !PROGRAM NAME IN SIXBIT
00616 TERMINAL_LOC 4 0-35 !TTY LOCATION
00617 NODE_NUMBER 4 0-11 !OCTAL NODE #
00618 LINE_NUMBER 4 12-23 !OCTAL LINE #
00619 TERMINAL_NUMBER 4 24-35 !OCTAL TTY #
00620 DATA_POINTER 5 0-35 !POINTER TO DATA
00621 !- # OF ITEMS,,OFFSET FROM SWECOD
00622 END ENTRY
00623
00624 !VALUES
00625 ! SWECOD
00626 ! SWEPOK 1 !EVENT WAS A POKE
00627 ! SWESNP 2 !EVENT WAS A SNOOP
00628 ! SWETRP 3 !EVENT WAS A TRPSET
00629 ! SWERTT 4 !EVENT WAS A RTTRAP
00630 ! SWEMS1 5 !MISC. EVENT 1
00631 ! SWEMS2 6 !MISC. EVENT 2
00632 !END VALUES
00633
00634 !++
00635 ! Information recorded by TOPS-10 when some part of the configuration
00636 ! changes status. This is not an error.
00637 !--
00638
00639 ENTRY TOPS10
00640 015 CONFIG_CHANGE_10
00641 DEVICE_NAME_1 0 0-35 !SIXBIT UNIT NAME
00642 NXM_TAB,_BEFORE 0 HEAD-F !PTR TO NXM TABLE
00643 !-LENGTH,,OFFSET FROM HEADER WD 0
00644 TIME_CHANGE 0 0-35 !AMOUNT OF TIME CHANGE IN JIFFIES
00645 NODE_NUMBER 0 0-35 !NODE NUMBER
00646 DEVICE_NAME_2 1 0-35 !SIXBIT UNIT NAME
00647 NXM_TAB,_AFTER 1 HEAD-F !PTR TO NXM TABLE
00648 !-LENGTH,,OFFSET FROM HEADER WD 0
00649 DATE_TIME 1 0-35 !CURRENT DATE/TIME
00650 NODE_NAME 1 0-35 !SIXBIT NODE NAME
00651 CHANGE_REASON 2 0-11 !SIXBIT REASON ANSWER
00652 COMMAND_CODE 2 12-17 !COMMAND CODE
00653 !ATTACH = 0
00654 !DETACH = 1
00655 !EXCHANGE = 2
00656 !DATE/TIME CHANGE = 3
00657 !SET CPU OFFLINE = 4
00658 !SET CPU ONLINE = 5
00659 !NODE OFFLINE = 6
00660 !NODE ONLINE = 7
00661 !OPR SET MEM ONLINE = 10
00662 !OPR SET MEM OFFLINE = 11
00663 !MONITOR SET MEM OFFLINE = 12
00664 BIT_PER_PAGE_FLAG 2 35 !RH = 1B35 IF 1 PAGE PER BIT
00665 END ENTRY
00666
00667 !++
00668 ! System log entry
00669 !--
00670
00671 ENTRY TOPS10
00672 016 SYS_ERROR_LOG_10
00673 ERROR_LOG 0 BODY-F !
00674 END ENTRY
00675
00676 !++
00677 ! Information recorded by TOPS-10 when a temporary monitor patch
00678 ! wants to save data in the event file. This may or may not be
00679 ! an error. The programmer responsible for the patch is the only
00680 ! one who knows.
00681 !--
00682
00683 ENTRY TOPS10
00684 017 SOFTWARE_REQ_DATA_10
00685 DEBPTR 0 0-35 !PNTR WORD TO SAVED DATA
00686 !-LENGTH,,OFFSET FROM HEADER WD 0
00687 END ENTRY
00688
00689 !++
00690 ! Obsolete entry for older versions of TOPS-10 (before 6.02) when
00691 ! a tape error is detected.
00692 !--
00693
00694 ENTRY TOPS10
00695 020 OLD_TAPE_ERR_10
00696 MAGNAM 0 0-35 !DEVICE NAME IN SIXBIT
00697 MAGRID 1 0-35 !REELID IN SIXBIT
00698 MAGFFB 2 0-35 !# OF FILES FROM BOT AT ERROR
00699 MAGRFF 3 0-35 !# OF RECORDS FROM LAST EOF AT ERROR
00700 MAGICC 4 0-35 !CONI MTC AT ERROR
00701 MAGICS 5 0-35 !CONI MTS AT ERROR
00702 MAGFCC 6 0-35 !CONI MTC AFTER RETRY
00703 MAGFCS 7 0-35 !CONI MTS AFTER RETRY
00704 MAGRTC 8 0-35 !LH = 1B1 IF NON-RECOVERABLE
00705 !RH = RETRY COUNT
00706 MAGMED 9 0-35 !-1 IF TENTH ERROR SINCE LAST UNLOAD
00707 END ENTRY
00708
00709 !++
00710 !
00711 ! ERROR CODE 21 ENTRY tape error
00712 !
00713 !--
00714
00715 ENTRY TOPS10
00716 021 TAPE_ERR_10
00717 DEV_NAM 0 0-35 ! LOGICAL NAME OF DEVICE (SIXBIT)
00718 MEDIAID 1 0-35 ! TAPE REEL IDENTIFICATION
00719 ! FROM THE /REEL ID: PART OF MOUNT
00720 ! COMMAND. (SIXBIT)
00721 FILE_IN_ERROR 2 0-35 ! NUMBER OF FILES FROM BOT AT ERROR
00722 RECORD_IN_ERROR 3 0-35 ! NUMBER OF RECORDS FROM LAST EOF
00723 ! AT ERROR
00724 CNTRLLER_REG 4 0-35 ! RETRY WORD - GIVES THE INFO
00725 ! REGARDING TYPE OF MASSBUS AND
00726 ! TAPE CONTROLLER NUMBER
00727 SUM_HARD 4 1 ! LH = 1B1 IF NON-RECOVERABLE
00728 HARD 4 1 !
00729 RH20_FLAG 4 11 ! 1B11 IF RH20
00730 CONTROLLER_TYPE 4 12-14 ! BITS 11 12 13 14
00731 ! 0 0 0 0 = TM10A
00732 ! 0 0 0 1 = TM10B
00733 ! 0 0 1 0 = TC10C
00734 ! 0 0 1 1 = DX10
00735 ! 0 1 0 0 = RH10-TM02
00736 ! 0 1 0 1 = RH11-TM02
00737 ! 0 1 1 1 = TM78
00738 ! 1 1 0 0 = RH20-TM02
00739 ! 1 1 1 0 = RH20-DX20
00740 ! 1 1 1 1 = RH20-TM78
00741 ! RH = RETRY COUNT
00742 !
00743 FRAME_IN_ERR 5 0-35 ! NUMBER OF TAPE FRAMES/CHARACTERS
00744 ! INTO RECORD WHEN ERROR OCCURRED
00745 REG_BEFORE_ERR 6 0-35 ! BITS 18-36 GIVE THE NUMBER OF
00746 ! FILES FROM BOT BEFORE ERROR
00747 ! AND BITS 0-17 GIVE
00748 ! THE NUMBER OF RECORDS FROM
00749 ! LAST EOF BEFORE ERROR
00750 FINAL_ERR_STATUS 7 0-35 ! FINAL ERROR STATUS
00751
00752 CSB_TM10, _AT_ERR 8 HEAD-F ! Pointers to controller status block
00753 CSB_TM78, _AT_ERR 8 HEAD-F ! Pointers to controller status block
00754 CSB_DX10, _AT_ERR 8 HEAD-F ! Pointers to controller status block
00755 CSB_TM02, _AT_ERR 8 HEAD-F ! at error - - in the form
00756 ! -LENGTH,,OFFSET FROM HEADER WORD 0
00757 CSB_TM10, _AT_END 9 HEAD-F ! Pointers to controller status
00758 CSB_TM78, _AT_END 9 HEAD-F ! Pointers to controller status
00759 CSB_DX10, _AT_END 9 HEAD-F ! Pointers to controller status
00760 CSB_TM02, _AT_END 9 HEAD-F ! block after retry - - in the form
00761 ! -LENGTH,,OFFSET FROM HEADER WORD 0
00762 PPN 10 0-35 ! USER'S PROJECT/PROGRAMMER NO.
00763 PROGRAM_NAME 11 0-35 ! USER'S PROGRAM NAME WHEN ERROR
00764 ! OCCURRED
00765 ! Additional TU78 definitions
00766 REV_LEVEL_0_3 12 0-35 ! Next 2 words are 9-bit bytes
00767 REV_LEVEL_4_7 13 0-35
00768 CONI_AT_ERR 14 0-35
00769
00770 END ENTRY
00771
00772 !++
00773 ! TOPS-10 front-end entry
00774 !--
00775
00776 ENTRY TOPS10
00777 030 FE_DEVICE_ERR_10
00778 FE_DATA 0 BODY-F !Common FE table data
00779 END ENTRY
00780
00781 !++
00782 ! Information saved by TOPS-10 when the front end is reloaded.
00783 !--
00784
00785 ENTRY TOPS10
00786 031 FE_RELOAD_10
00787 FERNUM 0 0-35 !LH = CPU #
00788 !RH = DTE #
00789 !1B0 = MASTER DTE BIT
00790 FERSTS 1 0-35 !RELOAD STATUS
00791 !1B0 = LOG REQUEST
00792 !1B2 = DUMP FAILED
00793 !1B3 = TO 10 ERROR DURING DUMP
00794 !1B4 = TO 11 ERROR PASSING BOOTSTRAP
00795 !1B6 = RELOAD FAILED
00796 !1B7 = POWER FAIL DID NOT SET
00797 !1B8 = POWER FAIL DID NO CLEAR
00798 !1B9 = ROM DID NOT SEND A DOORBELL
00799 !1B10 = BOOT DIDN'T MAKE IT TO THE 11
00800 !1B11 = 11 ROM DIDN'T CLR TO 11 DOORBEL
00801 !1B12 = TO 10 BYTE XFR FOR DUMP HUNG
00802 !1B13 = ENTER FAILURE FOR DUMP FILE
00803 !1B14 = OPEN FAILURE FOR DUMP DEVICE
00804 !1B15 = OUTPUT FAILURE FOR DUMP FILE
00805 !1B16 = TO 11 BYTE XFER TIMED OUT
00806 !177B35 = RETRY COUNT
00807 FERFNM 2 MAIN$Z !FILE NAME STRING POINTER
00808 FERSIZ 3 0-35 !SIZE OF STRING
00809 END ENTRY
00810
00811 !++
00812 ! Information saved by TOPS-10 when the KS10 halts
00813 !--
00814
00815 ENTRY TOPS10
00816 033 KS_HALT_STATUS_10
00817 HSBCOD 0 0-35 !HALT STATUS CODE (PHYSICAL LOCATION 0 0-35
00818 HSBEPC 1 0-35 !PC AT ERROR (PHYSICAL LOCATION 1 0-35
00819 KS_HS_BLOCK 2 BODY-F !PTR TO HALT STATUS BLOCK
00820 !-LENGTH,,OFFSET FROM HSBCOD
00821 HSBCBP 3 0-35 !PTR TO CLOCK STOP BLOCK (UNUSED 0-35
00822 !-LENGTH,,OFFSET FROM HSBCOD
00823 END ENTRY
00824
00825 !++
00826 ! Obsolete set of disk statistics from TOPS-10. This is now recorded
00827 ! in entry 045.
00828 !--
00829
00830 ENTRY TOPS10
00831 040 OLD_DISK_STATS_10
00832 USCNAM 0 0-35 !DEVICE NAME IN SIXBIT
00833 USCHID 1 0-35 !HOME BLOCK ID IN SIXBIT
00834 USCHCT 2 0-35 !HARD ERROR COUNT
00835 USCSCT 3 0-35 !SOFT ERROR COUNT
00836 SEEK_INC_CNT 4 0-35 ! Seek imcomplete count - UNIPCT
00837 USCHNG 5 0-35 !HUNG COUNT
00838 THUNG_CNT 5 9-17 ! THUNG count { UNIHNG
00839 PHUNG_CNT 5 18-26 ! PHUNG count {
00840 SHUNG_CNT 5 27-35 ! SHUNG count {
00841 USCMCT 6 0-35 !SOFTWARE ERROR COUNT
00842 SAT_ERRORS 6 0-11 ! SAT error count {
00843 RIB_ERRORS 6 12-23 ! RIB error count { UNIMCT
00844 CHKSM_ERRORS 6 24-35 ! Checksum error count {
00845 USCBRC 7 0-35 !TOTAL BLOCKS READ IN BUFFERED MODE
00846 USCBWC 8 0-35 !TOTAL BLOCKS WRITTEN IN BUFFERED MODE
00847 USCDRC 9 0-35 !TOTAL BLOCKS READ IN DUMP MODE
00848 USCDWC 10 0-35 !TOTAL BLOCKS WRITTEN IN DUMP MODE
00849 USCMRC 11 0-35 !TOTAL BLOCKS READ BY MONITOR
00850 USCMWC 12 0-35 !TOTAL BLOCKS WRITTEN BY MONITOR
00851 USCICT 13 0-35 !TOTAL BLOCKS READ FOR SWAPPER
00852 USCOCT 14 0-35 !TOTAL BLOCKS WRITTEN BY SWAPPER
00853 USCMSC 15 0-35 !TOTAL SEEKS BY MONITOR
00854 USCUSC 16 0-35 !TOTAL SEEKS FOR JOBS
00855 END ENTRY
00856
00857 !++
00858 !
00859 ! TOPS-10 - ERROR CODE 41 ENTRY
00860 !
00861 !--
00862
00863 ENTRY TOPS10
00864 041 OLD_TAPE_STATS_10
00865 DEVICE_NAME 0 0-35 ! device name
00866 MEDIAID 1 0-35 ! media identification
00867 NO_FRAMES_READ 2 0-35 ! number of frames read
00868 NO_FRAMES_WRITTEN 3 0-35 ! number of frames written
00869 SOFT_READ_ERRORS 4 0-35 !
00870 HARD_READ_ERRORS 5 0-35 !
00871 SOFT_WRITE_ERRORS 6 0-35 !
00872 HARD_WRITE_ERRORS 7 0-35 !
00873 PPN 8 0-35 ! program,,programmer number
00874 USER 9 0-35 ! user making request
00875 END ENTRY
00876
00877 !++
00878 ! Tape statistics recorded by TOPS-10.
00879 !--
00880
00881 ENTRY TOPS10
00882 042 TAPE_STATS_10
00883 TPSNAM 0 0-35 !DEVICE NAME IN SIXBIT
00884 TPSRID 1 0-35 !REELID IN SIXBIT
00885 TPSWRC 2 0-35 !TOTAL # OF CHARACTERS READ
00886 TPSWWC 3 0-35 !TOTAL # OF CHARACTERS WRITTEN
00887 TPSSRE 4 0-35 !TOTAL # OF SOFT READ ERRORS
00888 TPSHRE 5 0-35 !TOTAL # OF HARD READ ERRORS
00889 TPSSWE 6 0-35 !TOTAL # OF SOFT WRITE ERRORS
00890 TPSHWE 7 0-35 !TOTAL # OF HARD WRITE ERRORS
00891 TPSPPN 8 0-35 !USER'S PPN
00892 TPSLAB 9 0-35
00893 TPSUSN 10 0-35
00894 TPSUTP 11 0-35
00895 END ENTRY
00896
00897 !++
00898 ! Disk statistics recorded by TOPS-10.
00899 !--
00900
00901 ENTRY TOPS10
00902 045 DISK_STATS_10
00903 DSCSBP 0 MAIN-F !PTR TO SUBLOCKS
00904 !-#OF BLOCKS,,OFFSET FROM DSCSBP TO 1ST
00905 END ENTRY
00906
00907 !++
00908 ! Information recorded by TOPS-10 when the DL10 communications
00909 ! subsystem detects an error.
00910 !--
00911
00912 ENTRY TOPS10
00913 050 DL_HARDWARE_ERR_10
00914 DLEPRT 0 0-35 !DL10 PORT WITH ERROR
00915 DLECNI 1 0-35 !CONI DLC
00916 DLEDTI 2 0-35 !DATAI DLC
00917 DLECN0 3 0-35 !CONI DLB R=0
00918 DLECN1 4 0-35 !CONI DLB R=1
00919 DLECN2 5 0-35 !CONI DLB R=2
00920 DLECN3 6 0-35 !CONI DLB R=3
00921 DLEDT1 7 0-35 !DATAI DLB (R=1 0-35 MB
00922 DLEPGM 8 0-35 !11 PROGRAM NAME
00923 DLESTS 9 0-35 !SOFTWARE STATUS
00924 ! DLEERR 10 0-35
00925 ! DLERHS 11 0-35
00926 ! DLECOD 12 0-35
00927 ! DLEPER 13 0-35
00928 END ENTRY
00929
00930 !++
00931 ! Obsolete parity error/NXM entry written by TOPS-1O for the
00932 ! KI10 processor.
00933 !--
00934
00935 ENTRY TOPS10
00936 051 KI_PAR_NXM_INT_10
00937 KIINAM 0 0-35 !CPU NAME IN SIXBIT
00938 KIIPCI 1 0-35 !PC AT INTERRUPT
00939 KIIAPR 2 0-35 !CONI APR AT INTERRUPT
00940 KIIPII 3 0-35 !CONI PI AT INTERRUPT
00941 KIIPPN 4 0-35 !PPN OF USER RUNNING AT INTERRUPT
00942 KIIPGM 5 0-35 !SIXBIT PROGRAM NAME OF USER RUNNING AT INTERRUPT
00943 END ENTRY
00944
00945 !++
00946 !
00947 ! The following describes the new KL-10 data parity trap
00948 ! and interrupt records for TOPS-10.
00949 !
00950 !--
00951
00952 ENTRY TOPS10
00953 052 KL_PAR_NXM_INT_10
00954 CPU_NAME 0 0-35 !In SIXBIT.
00955 PROGRAM_COUNTER 1 0-35 !At time of interrupt.
00956 APR_STATUS 2 0-35 !CONI APR at time of interrupt.
00957 PI_STATUS 3 0-35 !CONI PI shows level of error.
00958 RDERA_STATUS 4 0-35 !RDERA at time of interrupt.
00959 SBDIAG_LIST 5 HEAD-F !SBDIAGs at time of error.
00960 END ENTRY
00961
00962 !++
00963 ! Obsolete NXM trap entry written by TOPS-10 for the KS10 processor.
00964 !--
00965
00966 ENTRY TOPS10
00967 054 KS_NXM_TRAP_10
00968 KSNNAM 0 0-35 !CPU NAME IN SIXBIT
00969 KSNPCT 1 0-35 !PC AT TRAP
00970 KSNPFW 2 0-35 !PAGE FAIL WORD
00971 KSNPMA 3 0-35 !MAPPED PHYSICAL MEMORY ADDRESS AT TRAP
00972 KSNBDW 4 0-35 !BAD DATA WORD
00973 KSNPIT 5 0-35 !CONI PI AT TRAP
00974 KSNPPN 6 0-35 !PPN OF USER THAT TRAPPED
00975 KSNPGM 7 0-35 !PROGRAM NAME IN SIXBIT
00976 KSNGDW 8 0-35 !GOOD DATA WORD
00977 KSNRET 9 0-35 !RETRY WORD
00978 !1B0 =THIS IS A KS10
00979 !1B1 = NON-RECOVERABLE ERROR
00980 !27-35 = RETRY COUNT
00981 KSNNRT 10 0-35 !NUMBER OF RECOVERABLE TRAPS SINCE LAST RELOAD
00982 KSNNNT 11 0-35 !NUMBER OF NON-RECOVERABLE TRAPS SINCE LAST RELOAD
00983 END ENTRY
00984
00985 !++
00986 !
00987 ! The following describes the new KL-10 data parity trap
00988 ! and interrupt records for TOPS-10.
00989 !
00990 !--
00991
00992 ENTRY TOPS10
00993 055 KL_OR_KS_PAR_TRAP_10
00994 CPU_NAME 0 0-35 !In SIXBIT.
00995 PROGRAM_COUNTER 1 0-35 !At time of interrupt.
00996 PAGE_FAIL_WORD 2 0-35 !Includes address and PF code.
00997 PHYS_ADDRESS 3 0-35 !of trap.
00998 BAD_WORD 4 0-35 !Contents of word before recovery.
00999 PI_STATUS 5 0-35 !CONI PI shows level of error.
01000 USER_ID 6 0-35 !PPN of user at time of trap.
01001 PROGRAM_NAME 7 0-35 !of current user at time of trap.
01002 GOOD_WORD 8 0-35 !Contents of word after recovery.
01003 NOT_KL_FLAG 9 0 !Set if this is KS10.
01004 NOT_RECOVERED_FLAG 9 1 !Set by monitor when can't recover.
01005 CACHE_FAILED_FLAG 9 2 !When read from memory OK.
01006 CACHE_USE_FLAG 9 3 !Set when cache was on at time.
01007 SWEEP_FLAG 9 4 !If error during cache sweep.
01008 CACHE_DISABLED 9 5 !If cache was disabled.
01009 !undefined 9 6-17
01010 CACHE_ON_COUNT 9 18-26 !Count of errors with cache on.
01011 CACHE_OFF_COUNT 9 27-35 !Count of errors with cache off.
01012 RECOVERED_COUNT 10 0-35 !Count of recoverable trap errors.
01013 NOT_RECOVERED_COUNT 11 0-35 !Count of non-recoverable errors.
01014 END ENTRY
01015
01016 !++
01017 !
01018 ! The following describes the new KL-10 interrupt and trap
01019 ! sweep entries.
01020 !
01021 !--
01022
01023 ENTRY TOPS10
01024 056 NXM_MEMORY_SWEEP_10
01025 CPU_NAME 0 0-35 !In SIXBIT.
01026 TOTAL_SINCE_RELOAD 1 0-35 !Count of NXMs.
01027 SPUR_SINCE_RELOAD 2 0-35 !Count of spurious NXMs.
01028 FIRST_ADDRESS 3 0-35 !Of this sweep.
01029 LAST_ADDRESS 4 0-35 !Of this sweep.
01030 !obsolete for compat. 5 0-35
01031 TOTAL_THIS_SWEEP 6 0-35
01032 !same as word 1 ?? 7 0-35
01033 !obsolete for compat. 8 0-35
01034 ADDRESS_AND 9 0-35 !Logical and of bad addresses.
01035 ADDRESS_OR 10 0-35 !Logical OR or bad addresses.
01036 SEEN_BY_CHANNEL 11 0-35 !Count of NXMs seen by channel.
01037 !undefined 12 0-34
01038 BIT_PER_PAGE_FLAG 12 35 !Flag for NXM table
01039 NXM_TAB,_BEFORE_ERR 13 HEAD-F !
01040 NXM_TAB,_AFTER_ERR 14 HEAD-F !
01041 TOP_TEN,_BAD_ADD 15 HEAD-F !
01042 END ENTRY
01043
01044 ENTRY TOPS10
01045 057 PAR_MEMORY_SWEEP_10
01046 CPU_NAME 0 0-35 !In SIXBIT.
01047 TOTAL_SINCE_RELOAD 1 0-35 !Count of parity errors.
01048 SPUR_SINCE_RELOAD 2 0-35 !Count of spurious parity errors.
01049 FIRST_CONTENTS 3 0-35 !Of this sweep.
01050 FIRST_ADDRESS 4 0-35 !Of this sweep.
01051 PAR_SWEEP_DATA 5 HEAD-F !pointer to %CCPAR sub-table.
01052 TOP_TEN,_BAD_ADD 6 HEAD-F !Pointer to %CCMPT sub-table.
01053 END ENTRY
01054
01055 !++
01056 ! Obsolete entry written by TOPS-10 for the KL10 processor with
01057 ! a parity error interrupt.
01058 !--
01059
01060 ENTRY TOPS10
01061 060 OLD_CPU_PAR_INT_10
01062 KDINAM 0 0-35 !CPU NAME IN SIXBIT
01063 KDITPE 1 0-35 !# MPE'S
01064 KDISPE 2 0-35 !# SPURIOUS MPE'S
01065 KDIMPC 3 0-35 !# OF CONTINUES AFTER MPE HALTS
01066 KDIMPP 4 0-35 !PC AT MPE INTERRUPT
01067 KDIMPW 5 0-35 !CONTENTS OF 1ST BAD WD FOUND ON SWEEP
01068 KDIMPA 6 0-35 !ADDRESS OF 1ST BAD WD FOUND ON SWEEP
01069 KDIPAR 7 0-35 !AOB POINTER TO %CCPAR TABLE
01070 KDIMPT 8 0-35 !AOB POINTER TO %CCMPT TABLE
01071 KDIPPN 9 0-35 !PPN OF USER
01072 KDIPGM 10 0-35 !PROGRAM NAME
01073 KDICNI 11 0-35 !CONI APR
01074 KDIERA 12 0-35 !RDERA
01075 KDISBD 13 0-35 !PTR TO SBDIAG SUBTABLE
01076 END ENTRY
01077
01078 !++
01079 !
01080 ! The following describes the old KL-10 data parity trap
01081 ! entries on TOPS-10. (Not to be supported in ANALYZE).
01082 !
01083 !--
01084
01085 ENTRY TOPS10
01086 061 CPU_PAR_TRAP_10
01087 PAGE_FAIL_WORD 0 0-35 !At time of trap.
01088 BAD_WORD 1 0-35 !Contents of word with parity error.
01089 GOOD_WORD 2 0-35 !What the word should have been.
01090 PHYS_ADDRESS 3 0-35 !Address of parity error.
01091 !undefined 4 0
01092 NOT_RECOVERED_FLAG 4 1 !Set by monitor when can't recover.
01093 CACHE_FAILED_FLAG 4 2 !When read from memory OK.
01094 CACHE_USE_FLAG 4 3 !Set when cache was on at time.
01095 SWEEP_FLAG 4 4 !If error during cache sweep.
01096 CACHE_DISABLED 4 5 !If cache was disabled.
01097 !undefined 4 6-17 !
01098 CACHE_ON_COUNT 4 18-26 !Count of errors with cache on.
01099 CACHE_OFF_COUNT 4 27-35 !Count of errors with cache off.
01100 RECOVERED_COUNT 5 0-35 !Count of recoverable trap errors.
01101 NOT_RECOVERED_COUNT 6 0-35 !Count of non-recoverable errors.
01102 PROGRAM_COUNTER 7 0-35 !PC at time of trap.
01103 END ENTRY
01104
01105 !++
01106 !
01107 ! Old interrupt entry from TOPS-10. Not to be
01108 ! supported in ANALYZE.
01109 !
01110 !--
01111
01112 ENTRY TOPS10
01113 062 CPU_PAR_INT_10
01114 CPU_NAME 0 0-35 !In SIXBIT.
01115 MEM_PAR_ERRORS 1 0-35 !Count of memory parity errors.
01116 SPURIOUS_ERRORS 2 0-35 !Count of spurious parity errors.
01117 ATTEMPTED_CONTINUES 3 0-35 !Number of times tried to continue.
01118 PROGRAM_COUNTER 4 0-35 !PC at first error.
01119 FIRST_CONTENTS 5 0-35 !Found during sweep.
01120 FIRST_ADDRESS 6 0-35 !Physical address of first bad word.
01121 PAR_SWEEP_DATA 7 HEAD-F !pointer to %CCPAR sub-table.
01122 TOP_TEN,_BAD_ADD 8 HEAD-F !Pointer to %CCMPT sub-table.
01123 USER_ID 9 0-35 !PPN of user running at time of error.
01124 PROGRAM_NAME 10 0-35 ! His program.
01125 APR_STATUS 11 0-35 !CONI APR at time of first error.
01126 RDERA_STATUS 12 0-35 !RDERA at time of first error.
01127 SBDIAG_LIST 13 HEAD-F !Pointer to SBDIAG sub-table.
01128 ! - # blocks,,offset from header.
01129 END ENTRY
01130
01131 !++
01132 !
01133 ! KL10 status block entry for TOPS-10. This comes after
01134 ! certain entries if KLSTAT has been turned on.
01135 !
01136 !--
01137
01138 ENTRY TOPS10
01139 063 KL_CPU_STATUS_10
01140 APR_ID 0 0-35 !CPU identifier.
01141 APR_STATUS 1 0-35 !CONI APR word at time of crash.
01142 PI_STATUS 2 0-35 !CONI PI word at time of crash.
01143 PAGE_DATAI 3 0-35 !DATAI PAG at time of crash.
01144 PAGE_STATUS 4 0-35 !CONI PAG at time of crash.
01145 LAST_MUUO 5 0-35 !UPT location 424.
01146 LAST_MUUO_PC 6 0-35 !UPT location 425.
01147 MUUO_CONTEXT_WORD 7 0-35 !UPT location 426.
01148 MUUO_RESERVED 8 0-35 !UPT location 427.
01149 RDERA_STATUS 9 0-35 !RDERA at crash time.
01150 CONI_RH20_LIST 10 0-35 !All CONIs from RH20s.
01151 CONI_DTE_LIST 18 0-35 !All CONIs from DTEs.
01152 CHN_LOGOUT_LIST 22 BODY-F !EPT loc 0 through 37.
01153 DTE_CONTROL_BLOCK 54 BODY-F !EPT loc 140 through 177.
01154 PAGE_FAIL_WORD 86 0-35 !UPT location 500.
01155 PAGE_FAIL_OLD_PC 87 0-35 !UPT location 501.
01156 PAGE_FAIL_NEW_PC 88 0-35 !UPT location 502.
01157 UPT_503 89 0-35 !Reserved (unknown).
01158 AC_BLOCK_6_DATA 90 BODY-F !Locs. 0-3 and 12.
01159 AC_BLOCK_7_DATA 95 BODY-F !Locs. 0-2.
01160 SBDIAG_LIST 98 HEAD-F !Pointer to SBDIAG list.
01161 END ENTRY
01162
01163 !++
01164 !
01165 ! Device status block entry for TOPS-10.
01166 !
01167 !--
01168
01169 ENTRY TOPS10
01170 064 DEVICE_STATUS_10
01171 NUMBER_IO_INSTR 0 0-17 !Number of IO instructions in block.
01172 START_OF_INSTR 0 18-35 !Where instructions begin.
01173 NUMBER_OF_RESULTS 1 0-17 !Number of IO instruction results.
01174 START_OF_RESULTS 1 18-35 !Where results begin.
01175 DEVICE_DATA 2 0-35 !-(NUMBER_IO_INSTR + NUMBER_OF_RESULTS)
01176 END ENTRY
01177
01178 !++
01179 ! Obsolete KL10 address fail entry written by TOPS-10.
01180 !--
01181
01182 ENTRY TOPS10
01183 066 OLD_KL_ADDRESS_FAIL_10
01184 KAENAM 0 0-35 !SIXBIT CPU NAME
01185 KAETNE 1 0-35 !TOTAL # OF ERRORS
01186 KAESNE 2 0-35 !# F SPURIOUS ERRORS
01187 KAEMPP 3 0-35
01188 KAENJA 4 0-35
01189 KAEMNA 5 0-35
01190 KAELNA 6 0-35
01191 KAEMNR 7 0-35
01192 KAENTS 8 0-35 !# ERRORS DETECTED THIS SWEEP
01193 KAENSC 9 0-35 !# OF SWEEPS
01194 KAEUEN 10 0-35 !# OF USER ENABLED ERRORS
01195 KAENAA 11 0-35 !LOGICAL AND OF BAD ADDRESSES
01196 KAENOA 12 0-35 !LOGICAL OR OF BAD ADDRESSES
01197 KAENCS 13 0-35 !# FAILURES DET BY CHAN BUT NOT CPU
01198 KAEKPG 14 0-35 !FLAG WD FOR NXM TABLES
01199 KAEBEF 15 0-35 !PTR TO NXM TABLE BEFORE ERROR
01200 KAEAFT 16 0-35 !PTR TO NXM TABLE AFTER ERROR
01201 KAEADR 17 0-35 !PTR TO LIST OF BAD ADDRESSES
01202 KAEPPN 18 0-35 !PPN OF USER
01203 KAEPGM 19 0-35 !PROGRAM NAME
01204 KAECNI 20 0-35 !CONI APR
01205 KAEERA 21 0-35 !RDERA
01206 KAESBD 22 0-35 !PTR TO SBDIAG SUBTABLE
01207 END ENTRY
01208
01209 !++
01210 ! Address fail data written by TOPS-10.
01211 !--
01212
01213 ENTRY TOPS10
01214 067 KL_ADDRESS_FAIL_10
01215 KAENAM 0 0-35 !CPU NAME IN SIXBIT
01216 KAETNE 1 0-35 !# REPRODUCIBLE ERRORS
01217 KAESNE 2 0-35 !# SPURIOUS ERRORS
01218 KAEMPP 3 0-35 !PC AT ERROR
01219 KAENJA 4 0-35 !# OF JOBS AFFECTED
01220 KAEMNA 5 0-35 !1ST BAD ADDRESS
01221 KAELNA 6 0-35 !LAST ADDRESS
01222 KAEMNR 7 0-35 !RELATIVE ADDR OF NXM IN SEGMENT
01223 KAENTS 8 0-35 !# OF ERRORS DETECTED THIS SWEEP
01224 KAENSC 9 0-35 !# OF CORE SWEEPS
01225 KAEUEN 10 0-35 !# USER ENABLED ERRORS
01226 KAENAA 11 0-35 !LOGICAL AND OF BAD ADDRESSES
01227 KAENOA 12 0-35 !LOGICAL OR OF BAD ADDRESSES
01228 KAENCS 13 0-35 !# DET BY CHAN BUT NOT CPU
01229 KAEKPG 14 0-35 !FLAG WD FOR NXM TABLES
01230 KAEBEF 15 0-35 !PTR TO NXM TABLES BEFORE ERROR
01231 !-LENGTH,,OFFSET FROM HEADER WD 0
01232 KAEAFT 16 0-35 !PTR TO NXM TABLES AFTER ERROR
01233 !-LENGTH,,OFFSET FROM HEADER WD 0
01234 KAEADR 17 0-35 !PTR TO LIST OF BAD ADDRESSES
01235 !-LENGTH,,OFFSET FROM HEADER WD 0
01236 KAEPPN 18 0-35 !PPN OF USER
01237 KAEPGM 19 0-35 !PROGRAM NAME IN SIXBIT
01238 KAECNI 20 0-35 !CONI APR
01239 KAEERA 21 0-35 !RDERA
01240 KAESBD 22 0-35 !PTR TO SBDIAG SUBTABLE
01241 !-# OF ENTRIES,,OFFSET FROM HEADER WD 0
01242 END ENTRY
01243
01244 !++
01245 ! Information about hard copy errors written by TOPS-10 for
01246 ! the LP100 controller.
01247 !--
01248
01249 ENTRY TOPS10
01250 071 LP100_ERR_10
01251 LPTNAM 0 0-35 !DEVICE NAME IN SIXBIT
01252 LPTCNI 1 0-35 !CONI LP100
01253 LPTWRD 2 0-35 !LAST DATA WORD SENT TO PRINTER
01254 LPTTYP 3 0-35 !LPT ID
01255 END ENTRY
01256
01257 !++
01258 ! Information written by TOPS-10 on errors from a hard copy
01259 ! controller (BA10 or LP100).
01260 !--
01261
01262 ENTRY TOPS10
01263 072 HARD_COPY_ERR_10
01264 HCCNAM 0 0-35 !SIXBIT DEVICE MANE
01265 HCCTYP 1 0-35 !CONTROLLER/DEVICE NAME
01266 HCCCTL 1 0-5 !CONTROLLER TYPE
01267 !0 = ILLEGAL
01268 !1 = BA10
01269 !2 = LP100
01270 !3 = LP20 (ON KS10)
01271 !4 = CD20 (ON KS10)
01272 HCCDEV 1 6-11 !DEVICE TYPE
01273 !0 = ILLEGAL
01274 !1 = LPT
01275 !2 = CDR
01276 !3 = CDP
01277 !4 = PLT
01278 !1B17 = NON-RECOVERABLE
01279 !RH = RETRY COUNT
01280 HCCUID 2 0-35 !PPN OF USER
01281 HCCPGM 3 0-35 !PROGRAM NAME
01282 HCCSBP 4 0-35 !PTR TO DEVICE SUB-BLOCK
01283 !+LENGTH,,OFFSET FROM HCCNAM
01284 END ENTRY
01285
01286 !++
01287 ! The following entries are recorded by TOPS-20 via the
01288 ! monitor itself (the SYSERR) module.
01289 !--
01290
01291 !++
01292 !
01293 ! Reload information recorded by TOPS-20 systems whether or not an
01294 ! error occurred.
01295 !
01296 !--
01297
01298 ENTRY TOPS20
01299 101 SYSTEM_RELOAD_20
01300 SYS_NAME 0 MAIN$Z ! Offset to ASCIZ system name string
01301 SYS_BUILD_DATE 1 0-35 !System build date in universal format.
01302 MONITOR_VERSION 2 0-35 !Funny format showing major, minor
01303 !version, and edit number.
01304 CPU_SERIAL_NUMBER 3 0-35 !CPU which reloaded system as opposed
01305 !to CPU logging an error.
01306 WHY_RELOAD_CODE 4 MAIN$Z !Major reason-type supplied by
01307 !operator when reloading.
01308 BUGHLT_ADDRESS 5 0-35 !If auto-reload.
01309 RELOAD_FLAGS 6 0-35 !Don't know what flags are.
01310 END ENTRY
01311
01312 !++
01313 !
01314 ! Information recorded by TOPS-20 when a BUGCHK, BUGINF, or BUGHLT
01315 ! takes place.
01316 !
01317 !--
01318
01319 ENTRY TOPS20
01320 102 MONITOR_BUG_DATA_20
01321 SYS_NAME 0 MAIN$Z ! Offset to ASCIZ system name string
01322 CPU_SERIAL_NUMBER 1 0-35 !CPU which reloaded system as opposed
01323 !to CPU logging an error.
01324 MONITOR_VERSION 2 0-35 !Funny format showing major, minor
01325 !version, and edit number.
01326 SYS_BUILD_DATE 3 0-35 !System build date in universal format.
01327 !Undefined 4 0-33
01328 BUG_TYPE_FLAG 4 34-35 !Type of bug code
01329 ! DEFINE
01330 ! BUGCHK = 1
01331 ! BUGINF = 2
01332 ! BUGHLT = 3
01333 ! END DEFINE
01334 ERROR_ADDRESS 5 0-35 !Address of halt/check
01335 FORK_NUMBER 6 0-17 !Fork active at error time.
01336 JOB_NUMBER 6 0-35 ! Job active at time of occurrence.
01337 USER_ID 7 0-35 ! User number.
01338 PROGRAM_NAME 8 0-35 ! Name of job user was running.
01339 BUG_MESSAGE 9 MAIN$Z ! Offset to ASCIZ message string.
01340 SAVED_ACS 10 BODY-F !Contents of AC at time of error.
01341 !WORDS 10-25
01342 PI_STATUS 26 0-35 !CONI PI at time of STOPCODE.
01343 REGISTER_COUNT 27 0-35 !Maximum of 4.
01344 REGISTER_ONE 28 0-35 !
01345 REGISTER_TWO 29 0-35 !
01346 REGISTER_THREE 30 0-35 !
01347 REGISTER_FOUR 31 0-35 !
01348 STOP_BUG_NAME 32 0-35 !BUGCHK name in SIXBIT.
01349 BUGHLT_DATE_TIME 33 0-35 !Universal format time of crash.
01350 CHECK_TALLY 34 0-35 !Total number of errors since reload.
01351 APR_STATUS 35 0-35 !CONI APR at error-time.
01352 PAGE_STATUS 36 0-35 !CONI PAG at error-time.
01353 PAGE_DATAI 37 0-35 !DATAI PAG at error-time.
01354 RDERA_STATUS 38 0-35 !RDERA at error-time.
01355 END ENTRY
01356
01357 !++
01358 !
01359 ! TOPS-20 - ERROR CODE 111 ENTRY - Massbus device error
01360 !
01361 !--
01362
01363 ENTRY TOPS20
01364 111 MASSBUS_ERR_20
01365 DEV_NAM 0 0-35 !device name
01366 DEV_NAME 0 0-35 !device name
01367 VOL_ID 1 0-35 !volume identification
01368 MEDIAID 1 0-35 !media identification
01369 RH_CHAN_TYPE 2 15-17 !RH controller type
01370 RH_DEV_TYPE 2 31-35 !device type
01371 LBN 3 0-35 !logical block number at error
01372 ERR_LOCATION 3 0-35 !record number at error
01373 FILE_IN_ERROR 3 0-17 ! FILE IN ERROR
01374 RECORD_IN_ERROR 3 18-35 ! RECORD IN ERROR
01375 FINAL_ERR_STATE 4 0-35 !final error state from TOPS20
01376 HARD 4 0 !hard error - non-recoverable
01377 ECC_CORR 4 1 !ECC correctable error
01378 DAT_ERR 4 2 !data error
01379 HDR_ERR 4 3 !header error
01380 DEV_ERR 4 4 !device error - neither data
01381 !or header
01382 POSITION_ERR 4 5 !positioning error
01383 FORMAT_ERR 4 6 !format error
01384 REC_NOMOTION_ERR 4 17 !recoverable no motion error
01385 CONI_INITIAL 5 0-35 !initial RH controller status
01386 RHCS1_ERR 5 20-35 ! Control and Status 1 for RH11
01387 CONI_FINAL 6 0-35 !final RH controller status
01388 SEEK_CNT 7 0-35 !number of seeks
01389 BLOCKS_READ 8 0-35 !no. of blocks read for disk
01390 FRAMES_READ 8 0-35 !no. of frames read for tape
01391 BLOCKS_WRITE 9 0-35 !no. of blocks written for disk
01392 FRAMES_WRITTEN 9 0-35 !no. of frames written for tape
01393 FILE_NAME 10 0-35 !file name
01394 USER 11 0-35 !user making request
01395 PROGRAM_RUN 12 0-35 !program running
01396 RH_DATI_TCR_ERR 13 0-35 !RH control reg at error
01397 RHCS2_ERR 13 20-35 ! Control and Status 2 for RH11
01398 RH_DATI_TCR_END 14 0-35 !RH control reg at end
01399 RH_DATI_BAR_ERR 15 0-35 !RH block address reg at err
01400 UBA_STATUS_ERR 16 0-17 ! IF RH11
01401 UBA_MAP_ERR 16 18-35 ! IF RH11
01402 RH_DATI_BAR_END 16 0-35 !RH block address reg at end
01403 UBA_STATUS_END 16 0-17 ! IF RH11
01404 UBA_MAP_END 16 18-35 ! IF RH11
01405 UDB_JOB0 17 0-35 !unit data block for job 0
01406 IORB_STATUS 18 0-35 !IORB status word
01407 SUM_HARD 18 2 !Used by summary to say hard/soft
01408 SOFT_READ 19 0-35 !count of soft read errors
01409 SOFT_WRITE 20 0-35 !count of write errors
01410 HARD_READ 21 0-35 !count of hard read errors
01411 HARD_WRITE 22 0-35 !count of hard write errors
01412 CYLINDER 23 0-35 !cylinder position at error for disk
01413 FILE_POSITION 23 0-35 !file position at error for tape
01414 SURF_SECT 24 0-35 !surface and sector at error for disk
01415 ERR_RECORD 24 0-35 !record in error for tape
01416 CHAN_LOGO0 25 0-35 !channel logout word 0
01417 CHAN_LOGO1 26 0-35 !channel logout word 1
01418 CHAN_LOGO2 27 0-35 !channel logout word 2
01419 CCW1 28 0-35 !first chan control word
01420 CCW2 29 0-35 !second chan control word
01421 MPE_CNT 30 0-35 !parity error count
01422 NXM_CNT 31 0-35 !NXM error count
01423 RETRY_CNT 32 18-35 !final retry error count
01424 CHAN_ADDR 33 0-35 !channel address
01425 ! **** unknown 33 0-32 ! [1000]
01426 CHAN_NUMBER 33 33-35 !just the channel number
01427 UNIT_ADDR 34 0-35 !unit address
01428 KON_NUMBER 34 0-17 ! [1000]
01429 UNT_NUMBER 34 32-35 ! Funny name used by some people
01430 UNIT_NUMBER 34 32-35 ! [1000]just the unit number
01431 ! Can't handle 8-bit RP20 unit numbers
01432 SOFT_POS_ERR 35 0-35 !soft position error count
01433 HARD_POS_ERR 36 0-35 !hard positioning error count
01434 OVERRUN_ERR 37 0-35 !overrun error count
01435 ICR 38 0-35 !content of initial control reg
01436 INIT_CNTRL_REG 38 0-35 !content of initial control reg
01437 MB_DEV, _TABLE 39 BODY-F ! MASSBUS device registers
01438 ! 39 - 54
01439 ! ***** ADDITIONAL DEFINITIONS FOR DX20 *****
01440 DX_VER 39 18-35 ! DX version number
01441 DX20_MASSBUS_REG 40 MAIN+F ! Pointer to MASSBUS registers
01442 ! +LENGTH,,OFFSET
01443 DX20_DEVICE_REG 41 MAIN+F ! Pointer to device registers
01444 ! +LENGTH,,OFFSET
01445 !++
01446 !
01447 ! TM78 controller status block
01448 !
01449 !--
01450 TM78_CAS_REGS,_END_20 39 BODY-L ! CAS REGISTERS 0-21 FOR TU78
01451 TM78_CAS_REGS,_ERR_20 39 BODY-R
01452 TM78_U_CODE_REVS,_20 57 BODY-F ! TU78 U-CODE REVISION LEVELS (2 WORDS)
01453 TM78_SENSE_BYTES,_20 59 BODY-F ! 60 8-BIT BYTES IN 15 WORDS
01454 END ENTRY
01455
01456 !++
01457 ! This is the Tops-20 Release 5 disk/tape statistics entry.
01458 ! It is not an error. It occurs at normal system shutdown and
01459 ! at tape unloads, and for disk mount/dismount.
01460 !--
01461
01462 ENTRY TOPS20
01463 114 USAGE_DATA_20
01464 USAGE_EVENT 0 0-35 ! 1 = system shutdown
01465 ! 2 = disk pack mount
01466 ! 3 = disk pack dismount
01467 ! 4 = magtape unload
01468 TAPE_UNIT 1 0-35 ! System Logical Magtape unit #
01469 ! (ie MTAn), 0 if disk
01470 VOLUME_ID 2 0-35 ! SIXBIT name of volume/structure
01471 CHN_PIA 3 8-10 ! channel PI level
01472 CHN_BLK_ID 3 11-12 ! block code (1=CDB)
01473 CHN_TYPE 3 13-17 ! channel type
01474 DEV_PIA 3 26-28 ! device PIA level
01475 DEV_BLK_ID 3 29-30 ! block code (2=KDB, 3=UDB)
01476 DEV_TYPE 3 31-35 ! device type
01477 CHN_NUMBER 4 0-35 ! channel number
01478 KON_NUMBER 5 0-17 ! kontroller number (-1 if none)
01479 FULL_UNIT_NUMBER 5 32-35 ! Full unit number
01480 UNT_NUMBER 5 32-35 ! unit number
01481 UNIT_NUMBER 5 32-35 ! just the unit number
01482 ! Can't handle 8-bit RP20 unit numbers
01483 TOTAL_READS 6 0-35 ! total reads on this unit
01484 TOTAL_WRITES 7 0-35 ! total writes on this unit
01485 TOTAL_SEEKS 8 0-35 ! total seeks on this unit
01486 RD_NRZI 9 0-35 ! frames read in NRZI
01487 RD_PE 10 0-35 ! frames read in PE
01488 RD_GCR 11 0-35 ! frames read in GCR
01489 WR_NRZI 12 0-35 ! frames written in NRZI
01490 WR_PE 13 0-35 ! frames written in PE
01491 WR_GCR 14 0-35 ! frames written in GCR
01492 END ENTRY
01493
01494 !++
01495 ! Information recorded by TOPS-20 when some part of the configuration
01496 ! changes status. This is not an error.
01497 !--
01498
01499 ENTRY TOPS20
01500 115 CONFIG_CHANGE_20
01501 COMMAND_CODE 0 12-17 !OPERATION CODE FIELD
01502 UNIT_TYPE 1 31-35 !UNIT TYPE
01503 DEVICE_NAME 2 0-35 !SIXBIT LOGICAL DEVICE NAME
01504 MTOPR_FUNCTION 3 0-35 !MTOPR FUNCTION $MOINF WORD $MOISN
01505 CHANNEL_NUMBER 3 9-11 !CHANNEL #
01506 CONTROLLER_NUMBER 3 12-14 !CONTROLLER #
01507 UNIT_NUMBER 3 15-17 !UNIT #
01508 SERIAL_NUMBER 3 20-35 !DRIVE SERIAL NUMBER (IN BINARY)
01509 CHANGE_REASON 4 0-35 !WORD CONTAINING OFFSET TO REASON STRING
01510 END ENTRY
01511
01512 !++
01513 ! System log entry
01514 !--
01515
01516 ENTRY TOPS20
01517 116 SYS_ERROR_LOG_20
01518 ERROR_LOG 0 BODY-F !See below
01519 END ENTRY
01520
01521 !++
01522 ! TOPS-20 front-end entry
01523 !--
01524
01525 ENTRY TOPS20
01526 130 FE_DEVICE_ERR_20
01527 FE_DATA 0 BODY-F !Common FE table data
01528 END ENTRY
01529
01530 !++
01531 ! Information saved by TOPS-20 when the front end is reloaded.
01532 !--
01533
01534 ENTRY TOPS20
01535 131 FE_RELOAD_20
01536 R1_NUM 0 0-35 !-11 NUMBER
01537 R1_STS 1 0-35 !RELOAD STATUS BITS
01538 $R1GTF 1 0 !GTJFN FAILED FOR DUMP FILE
01539 $R1OPF 1 1 !OPENF FAILED FOR DUMP FILE
01540 $R1DPF 1 2 !DUMP FAILED
01541 $R110E 1 3 !TO -10 ERROR ON DUMP
01542 $R111E 1 4 !TO -11 ERROR ON BOOT
01543 $R1ASF 1 5 !ASGPAG FAILED ON DUMP
01544 $R1RLF 1 6 !RELOAD FAILED
01545 $R1PDF 1 7 !-11 DIDN'T POWER DOWN
01546 $R1PUF 1 8 !-11 DIDN'T POWER UP
01547 $R1RMF 1 9 !ROM DID NOT ACK THE -10
01548 $R1BSF 1 10 !-11 BOOT PROGRAM DIDN'T MAKE IT TO THE -11
01549 $R1NRL 1 11 !-11 TOOK MORE THAN 1 MINUTE TO RELOAD$
01550 !WILL CAUSE A RETRY
01551 ER$DHG 1 12 !TO-10 BYTE XFER FOR DUMP HUNG
01552 ER$ENF 1 13 !ENTER FAILURE FOR DUMP FILE
01553 ER$OPE 1 14 !OPEN FAILURE FOR DUMP OUTPUT DEVICE
01554 ER$OUF 1 15 !OUTPUT FAILURE FOR DUMP FILE
01555 ER$TT1 1 16 !TO-11 BYTE XFER TIMED OUT
01556 $R1RTC 1 30-35 !RETRY COUNT
01557 R1_FNM 2 0-35 !FILE NAME POINTER
01558 R1_ERW 3 0-35 ![534]BITS 2-17=RAD50 11'S FAILURE CODE
01559 !BITS 20-35 = 11'S PARITY STATUS REGISTER
01560 END ENTRY
01561
01562 !++
01563 ! Information saved by TOPS-20 when the KS10 halts
01564 !--
01565
01566 ENTRY TOPS20
01567 133 KS_HALT_STATUS_20
01568 STATUS_CODE 0 0-35 !HALT STATUS CODE - PHYSICAL LOCATON 0
01569 HS_HPC 1 0-35 !PROGRAM COUNTER - PHYSICAL LOCATION 1
01570 KS_HS_BLOCK 2 BODY-F !HALT STATUS BLOCK OFFSET POINTER
01571 !-LENGTH,,OFFSET
01572 CS_PTR 3 0-35 !CLOCK STOP BLOCK OFFSET PNTR (UNUSED)
01573 !-LENGTH,,OFFSET
01574 END ENTRY
01575
01576 !++
01577 !
01578 ! Parity trap entry for TOPS-20 systems
01579 !
01580 !--
01581
01582 ENTRY TOPS20
01583 160 CPU_PAR_TRAP_20
01584 PAGE_FAIL_WORD 0 0-35 !At time of trap.
01585 BAD_WORD 1 0-35 !Contents of word with parity error.
01586 GOOD_WORD 2 0-35 !What the word should have been.
01587 USER_ID 3 0-35 !User identifier.
01588 FORK_NUMBER 4 0-17 ! Fork in use at time.
01589 JOB_NUMBER 4 18-35 ! Job of user running at time.
01590 PROGRAM_NAME 5 0-35 ! Program running.
01591 PHYS_ADDRESS 6 0-35 !Address of parity error.
01592 !undefined 7 0
01593 NOT_RECOVERED_FLAG 7 1 !Set by monitor when can't recover.
01594 CACHE_FAILED_FLAG 7 2 !When read from memory OK.
01595 CACHE_USE_FLAG 7 3 !Set when cache was on at time.
01596 SWEEP_FLAG 7 4 !If error during cache sweep.
01597 !undefined 7 5-17 !
01598 RETRY_COUNT 7 18-35 !Number of times tried to recover.
01599 END ENTRY
01600
01601 !++
01602 ! Obsolete parity error interrupt record written by TOPS-20
01603 ! and replaced by entry 162.
01604 !--
01605
01606 ENTRY TOPS20
01607 161 OLD_CPU_PAR_INT_20
01608 PI_CNI 0 0-35 !CONI APR
01609 PI_ERA 1 0-35 !ERA
01610 PI_FPC 2 0-35 !PC AT INTERRUPT
01611 PI_SWP 3 0-35 !# ERRORS THIS SWEEP
01612 PI_AAD 4 0-35 !LOGICAL AND OF BAD ADDRESSES
01613 PI_OAD 5 0-35 !OR OF BAD ADDRESSES
01614 PI_ADA 6 0-35 ! AND OF BAD DATA
01615 PI_ODA 7 0-35 !OR OF BAD DATA
01616 PI_SBD 10 0-35 !S-BUS DIAG FUNCTION SUBTABLE
01617 PI_ADD 22 0-35 !LIST OF 1ST 10. BAD ADDRESSES
01618 PI_DAT 34 0-35 !LIST OF 1ST 10. BAD DATA WORDS
01619 PI_CDA 46 0-35 !LIST OF 1ST 10. GOOD DATA WORDS
01620 END ENTRY
01621
01622 !++
01623 !
01624 ! Interrupt entry from TOPS-20
01625 !
01626 !--
01627
01628 ENTRY TOPS20
01629 162 CPU_PAR_INT_20
01630 APR_STATUS 0 0-35 !CONI APR at time of first error.
01631 RDERA_STATUS 1 0-35 !RDERA at time of first error.
01632 PC_FLAGS 2 0-35 !Right-justified?
01633 PROGRAM_COUNTER 3 0-35 !PC at first error.
01634 MEM_PAR_ERRORS 4 0-35 !Count of parity errors this sweep.
01635 ADDRESS_AND 5 0-35 !Logical AND of failing addresses.
01636 ADDRESS_OR 6 0-35 !Logical OR of failing addresses.
01637 CONTENTS_AND 7 0-35 !Logical AND of failing data.
01638 CONTENTS_OR 8 0-35 !Logical OR of failing data.
01639 SBDIAG_LIST 9 HEAD-F !Pointer to SBDIAG sub-table.
01640 !- # blocks,,offset from header.
01641 TOP_TEN,_BAD_ADD 10 BODY-F !List of bad addresses.
01642 !WORDS 10-19
01643 TOP_TEN,_BAD_WORDS 20 BODY-F !List of bad word contents.
01644 !WORDS 20-29
01645 TOP_TEN,_GOOD_WORDS 30 BODY-F !List of what words should have been?
01646 !WORDS 30-39
01647 END ENTRY
01648
01649 !++
01650 !
01651 ! KL10 status block entry for TOPS-20. This comes after
01652 ! certain entries if KLSTAT has been turned on.
01653 !
01654 !--
01655
01656 ENTRY TOPS20
01657 163 KL_CPU_STATUS_20
01658 APR_ID 0 0-35 !CPU identifier.
01659 APR_STATUS 1 0-35 !CONI APR word at time of crash.
01660 PI_STATUS 2 0-35 !CONI PI word at time of crash.
01661 PAGE_DATAI 3 0-35 !DATAI PAG at time of crash.
01662 PAGE_STATUS 4 0-35 !CONI PAG at time of crash.
01663 MUUO_RESERVED 5 0-35 !UPT location 424
01664 LAST_MUUO 6 0-35 !UPT location 425.
01665 LAST_MUUO_PC 7 0-35 !UPT location 426.
01666 MUUO_CONTEXT_WORD 8 0-35 !UPT location 427.
01667 RDERA_STATUS 9 0-35 !RDERA at crash time.
01668 CONI_RH20_LIST 10 0-35 !All CONIs from RH20s.
01669 CONI_DTE_LIST 18 0-35 !All CONIs from DTEs.
01670 CHN_LOGOUT_LIST 22 BODY-F !EPT loc 0 through 37.
01671 DTE_CONTROL_BLOCK 54 BODY-F !EPT loc 140 through 177.
01672 PAGE_FAIL_WORD 86 0-35 !UPT location 500.
01673 PAGE_FAIL_FLAGS 87 0-35 !UPT location 501.
01674 PAGE_FAIL_OLD_PC 88 0-35 !UPT location 502.
01675 PAGE_FAIL_NEW_PC 89 0-35 !UPT location 503.
01676 AC_BLOCK_6_DATA 90 BODY-F !Locs. 0-3 and 12.
01677 AC_BLOCK_7_DATA 95 BODY-F !Locs. 0-2.
01678 SBDIAG_LIST 98 HEAD-F !Pointer to SBDIAG list.
01679 END ENTRY
01680
01681 !++
01682 ! Message recorded by TOPS-20 when TGHA finds an error in MOS
01683 ! memory.
01684 !--
01685
01686 ENTRY TOPS20
01687 164 MF_20_ERR_20
01688 MF_20_TEXT 0 0-35 !ALL TEXT
01689 END ENTRY
01690
01691 !++
01692 ! The following entries describe DECNET Phase II reports
01693 ! for TOPS-10 and TOPS-20.
01694 !--
01695
01696 ENTRY TOPS10 TOPS20
01697 201 NETCON_START
01698 NETCON_VERSION 0 0-35 ! Version of NETCON software
01699 NODE_NAME 1 MAIN$Z ! Offset to ASCIZ node name string
01700 PROGRAM_NAME 2 MAIN$Z ! Offset to ASCIZ program name string
01701 END ENTRY
01702
01703 ENTRY TOPS10 TOPS20
01704 202 NODE_DOWN_LINE_LOAD
01705 TARGET_NODE 0 MAIN$Z ! Offset to ASCIZ target node name
01706 SERVER_NODE 1 MAIN$Z ! Offset to ASCIZ server node name
01707 SERVER_LINE 2 MAIN$Z ! Offset to ASCIZ servr line designator
01708 FILE_NAME 3 MAIN$Z ! Offset to ASCIZ name of file loaded
01709 RETURN_CODE 4 28-35 ! Return code as described below
01710 PROGRAM_NAME 5 MAIN$Z ! Offset to ASCIZ program name string
01711 ! Unused 6 0-35
01712 END ENTRY
01713
01714 !++
01715 ! Return codes specified in NICE protocol version 1.0
01716 ! Bob Stewart, 28 March 1977
01717 !
01718 ! +1 SUCCESS
01719 ! -1 INVALID FUNCTION OR OPTION
01720 ! -2 INVALID MSG FORMAT
01721 ! -3 INSUFFICIENT STATUS
01722 ! -8 INVALID LINE ID
01723 ! -9 LINE IN WRONG STATE
01724 ! -10 LINE COMMUNICATIONS ERROR
01725 ! -11 INVALID NODE ID
01726 ! -12 INVALID SERVER ID
01727 ! -13 INVALID FILE
01728 ! -14 CONFIGURATION DATA BASE ERROR
01729 ! -15 RESOURCE ERROR
01730 ! -16 INVALID PARAMETER VALUE
01731 ! -17 LINE PROTOCOL ERROR
01732 ! -18 FILE I/O ERROR
01733 ! -19 NETWORK COMMUNICATIONS ERROR
01734 ! -20 NO ROOM FOR NEW ENTRY
01735 ! -21 REMOTE NICE PROCESS NOT AVAIL.
01736 !--
01737
01738 ENTRY TOPS10 TOPS20
01739 203 NODE_DOWN_LINE_DUMP
01740 TARGET_NODE 0 MAIN$Z ! Offset to ASCIZ target node name
01741 SERVER_NODE 1 MAIN$Z ! Offset to ASCIZ server node name
01742 SERVER_LINE 2 MAIN$Z ! Offset to ASCIZ servr line designator
01743 FILE_NAME 3 MAIN$Z ! Offset to ASCIZ name of file dumped
01744 RETURN_CODE 4 28-35 ! Return code as described above
01745 PROGRAM_NAME 5 MAIN$Z ! Offset to ASCIZ program name string
01746 ! Unused 6 0-35
01747 END ENTRY
01748
01749 ENTRY TOPS10 TOPS20
01750 210 NET_HARDWARE_ERR
01751 XMIT_NODE_ID 0 0-17 ! Transmit node ID #
01752 RECV_NODE_ID 0 18-35 ! Destination node ID #
01753 XMIT_NODE_NAME 1 MAIN$Z ! Offset to ASCIZ transmit node name
01754 RECV_NODE_NAME 2 MAIN$Z ! Offset to ASCIZ receive node name
01755 ADJ_NODE_NAME 3 MAIN$Z ! Offset to ASCIZ adjacent node name
01756 FUNCTION_WORD 4 0-35 ! Function word
01757 ! Unknown 4 0-9
01758 PARENT_HDWR_TYPE 4 10-17 ! Parent hardware system type
01759 PARENT_SFWR_TYPE 4 20-27 ! Parent operating system type
01760 HDWR_OPTION_TYPE 4 28-35 ! Hardware option type
01761 BYTE_COUNT 5 0-35 ! # of 8 bit bytes in log data section
01762
01763 ! LOG_DATA 14 MAIN-F ! Offset to log data section
01764 END ENTRY
01765
01766 ENTRY TOPS10 TOPS20
01767 211 NET_SOFTWARE_ERR
01768 END ENTRY
01769
01770 ENTRY TOPS10 TOPS20
01771 220 NET_OPR_LOG_ENTRY
01772 END ENTRY
01773
01774 ENTRY TOPS10 TOPS20
01775 221 NET_TOPOLOGY_CHANGE
01776 END ENTRY
01777
01778 ENTRY TOPS10 TOPS20
01779 222 NET_CHECK11_REPORT
01780 END ENTRY
01781
01782 ENTRY TOPS10 TOPS20
01783 230 NET_LINE_STATS
01784 END ENTRY
01785
01786 ENTRY TOPS10 TOPS20
01787 231 NET_NODE_STATS
01788 END ENTRY
01789
01790 ENTRY TOPS10 TOPS20
01791 232 OLD_DN64_STATS
01792 END ENTRY
01793
01794 ENTRY TOPS10 TOPS20
01795 233 DN6X_STATS
01796 END ENTRY
01797
01798 ENTRY TOPS10 TOPS20
01799 234 DN6X_ENABLE_DISABLE
01800 END ENTRY
01801
01802 ENTRY TOPS10 TOPS20
01803 240 DECNET_PHASE_III
01804 BYTE_COUNT 0 0-35 ! Count of 8 bit data bytes in entry.
01805 FUNCT_CODE 1 0-7 ! Type of message
01806
01807 ! Entry is an 8-bit byte stream. For an "Event Logging Message"
01808 ! (FUNCT_CODE = 1) the entry consists of the following fields:
01809
01810 ! SINK_FLAGS ! See WORD_11 definition
01811 ! EVENT_CODE ! See WORD_11 definition
01812 ! EVENT_CLASS
01813 ! EVENT_TYPE
01814 ! EVENT_TIME
01815 ! JULIAN_HALF_DAY
01816 ! SECOND
01817 ! MILLISECOND
01818 ! SOURCE_NODE
01819 ! NODE_ADDRESS
01820 ! NODE_NAME
01821 ! EVENT_ENTITY
01822 ! ENTITY_TYPE
01823 ! ENTITY_ID
01824 ! EVENT_DATA
01825 ! DATA_ID ! See WORD_11 definition
01826 ! PARAMETER_DATA
01827 ! PARAMETER_TYPE
01828 ! DATA_TYPE ! See WORD_11 definition
01829 ! COUNTER_DATA
01830 ! COUNTER_WIDTH
01831 ! BIT_MAPPED_FLAG
01832 ! COUNTER_TYPE
01833 ! BIT_MAP ! Present if BIT_MAPPED_FLAG is set
01834 ! DATA
01835 !
01836 END ENTRY
01837
01838
01839 !++
01840 ! KLIPA Statistics Event (CI or NI)
01841 !--
01842
01843 ENTRY TOPS10 TOPS20
01844 241 KLIPA_STATISTICS
01845 KLIPA_COUNTERS 0 MAIN+F ! Offset pointer to counter sub-block
01846 ! # of counters,,OFFSET from word 0
01847 NI_FLAG 1 0 ! 0 for CI, 1 for NI
01848 KLIPA_CHAN 1 15-17 ! KLIPA Channel #
01849 UCODE_VER 1 18-35 ! ucode version
01850 ! 2-x 0-35 ! KLIPA counter sub-block
01851 END ENTRY
01852
01853 TABLE TOPS10 TOPS20
01854 KLIPA_COUNTERS
01855 PATH_A_ACK_CNT 0 0-35 ! Path A ACK count
01856 PATH_A_NAK_CNT 1 0-35 ! Path A NAK count
01857 PATH_A_NO_RESP_CNT 2 0-35 ! Path A no response count
01858 PATH_B_ACK_CNT 3 0-35 ! Path B ACK count
01859 PATH_B_NAK_CNT 4 0-35 ! Path B NAK count
01860 PATH_B_NO_RESP_CNT 5 0-35 ! Path B no response count
01861 DATAGRAM_DSCRD_CNT 6 0-35 ! Datagrams discarded
01862 PACKET_XMIT_CNT 7 0-35 ! Packets transmitted
01863 PACKET_RCVD_CNT 8 0-35 ! Packets recieved
01864 DESIGNATED_PORT 9 0-35 ! Designated port
01865 ! (CI node 0-15 or All?)
01866 ! Add new counters here
01867 END TABLE
01868
01869 !++
01870 ! HSC50 End Packet
01871 !--
01872
01873 ENTRY TOPS10 TOPS20
01874 242 HSC50_END_PACKET
01875 KLIPA_PORT 0 0-17 ! KLIPA Channel #
01876 HSC_NODE 0 18-35 ! HSC50 CI node #
01877 MEDIAID 1 0-35 ! Media / volume ID in SIXBIT
01878 NUM_READS 2 0-35 ! Blocks read from disk
01879 ! or frames read from tape
01880 NUM_WRITES 3 0-35 ! Blocks written to disk
01881 ! or frames written to tape
01882 POSITION_AT_ERR_1 4 0-35 ! File # in error for tape
01883 ! CYL in error for disk (NOTE: Not
01884 ! accurate for multiple requests)
01885 POSITION_AT_ERR_2 5 0-35 ! Record # in error for tape
01886 ! SURF/SECT (LBN) for disk (NOTE: Not
01887 ! accurate for multiple requests)
01888 MSCP_END_PACKET 6 BODY-F ! MSCP end packet definition
01889 END ENTRY
01890
01891
01892 !++
01893 ! Generic MSCP End Message Format
01894 !
01895 ! All information is in swapped 32-bit byte format
01896 ! i.e. Byte 0 in bits 0-7 (LSB)
01897 ! 1 8-15
01898 ! 2 16-23
01899 ! 3 24-31 (MSB)
01900 ! Unused 32-35 (All zeros)
01901 !--
01902
01903 TABLE TOPS20
01904 MSCP_END_PACKET ! Generic End Message format
01905 CMD_REF_NUM_A 0 0-35 ! Address of end packet
01906 CMD_REF_NUM 0 0-31 ! Command reference number, 4 bytes
01907 UNIT_NUMBER 1 0-15 ! Unit being accessed (decimal) 2 bytes
01908 UNIT_NUMBER_L 1 0-7
01909 UNIT_NUMBER_H 1 8-15
01910 ! Reserved 1 16-31 ! All zeros
01911 ENDCODE 2 0-7 ! End message flag and command type
01912 END_FLAGS 2 8-15 ! End flags (Error Log Gen = 40 octal)
01913 STATUS_EVENT_CODE 2 16-31 ! Operation stat & err subcode, 2 bytes
01914 STAT_EVNT_CODE_L 2 16-23
01915 STAT_EVNT_CODE_H 2 24-31
01916 BYTE_COUNT 3 0-31 ! # of bytes successfully transferred
01917 ! host xfer byte cnt on tape, 4 bytes
01918 ! Undefined 4-6
01919 FIRST_BAD_BLOCK 7 0-31 ! First bad block detected (if any) in
01920 ! disk transfer, 4 bytes
01921
01922
01923 ! Abort command End Message format
01924
01925 OUTSTANDING_CRN 3 0-31 ! Command reference number of the
01926 ! command that was aborted, 4 bytes
01927
01928 ! Xyz command End Message format
01929
01930 RECS_SKIPD_1 3 0-7 ! Recs skip in tape repos cmd, 4 bytes
01931 RECS_SKIPD_2 3 3-15 !
01932 RECS_SKIPD_3 3 16-23 !
01933 RECS_SKIPD_4 3 24-31 !
01934 MULTI_UNT_COD_1 3 0-7 ! Access path bet cntrlr and unit,
01935 ! spindle that contains unit, 2 bytes
01936 MULTI_UNT_COD_2 3 8-15 !
01937 UNIT_FLAGS_1 3 16-23 ! Unit characterictic field, 2 bytes
01938 UNIT_FLAGS_2 3 24-31 !
01939 MSCP_VERS_1 3 0-7 ! Should always be zero, 2 bytes
01940 MSCP_VERS_2 3 8-15 !
01941 CNTRLR_FLAGS_1 3 16-23 ! Contrlr characteristic field, 2 bytes
01942 CNTRLR_FLAGS_2 3 24-31 !
01943 ! Unused 3 32-35 ! All zeros
01944 TAP_MRKS_SKIPD_1 4 0-7 ! Tape marks skip in repos cmd, 4 bytes
01945 TAP_MRKS_SKIPD_2 4 8-15 !
01946 TAP_MRKS_SKIPD_3 4 16-23 !
01947 TAP_MRKS_SKIPD_4 4 24-31 !
01948 CNTRLR_TMOUT_1 4 0-7 ! Time needed by ctlr to work, 2 bytes
01949 CNTRLR_TMOUT_2 4 8-15 !
01950 N_CSVRSN 4 16-23 ! Controller ucode version
01951 N_CHVRSN 4 24-31 ! Controller hardware version
01952 ! Unused 4 32-35 ! All zeros
01953 N_UNIT_IDEN_ONE_1 5 0-7 ! First wrd of unit identifier, 4 bytes
01954 N_UNIT_IDEN_ONE_2 5 8-15 !
01955 N_UNIT_IDEN_ONE_3 5 16-23 !
01956 N_UNIT_IDEN_ONE_4 5 24-31 !
01957 N_CNTRLR_IDEN_ONE_1 5 0-7 ! First wrd of ctlr identifier, 4 bytes
01958 N_CNTRLR_IDEN_ONE_2 5 8-15 !
01959 N_CNTRLR_IDEN_ONE_3 5 16-23 !
01960 N_CNTRLR_IDEN_ONE_4 5 24-31 !
01961 ! Unused 5 32-35 ! All zeros
01962 N_UNIT_MODEL_BYTE 6 0-7 ! Unit model byte
01963 N_UNIT_CLASS_BYTE 6 8-15 ! Unit class byte
01964 N_CNTRLR_MODEL_BYTE 6 0-7 ! Controller model byte
01965 N_CNTRLR_CLASS_BYTE 6 8-15 ! Controller class byte
01966 ! Reserved 6 16-31 ! All zeros
01967 ! Unused 6 32-35 ! All zeros
01968 POSITION_1 7 0-7 ! Position of tape in object counts
01969 POSITION_2 7 8-15 ! from BOT, 4 bytes
01970 POSITION_3 7 16-23 !
01971 POSITION_4 7 24-31 !
01972
01973 MEDIA_TYP_1 7 0-7 ! Media type identifier, 4 bytes
01974 MEDIA_TYP_2 7 8-15 !
01975 MEDIA_TYP_3 7 16-23 !
01976 MEDIA_TYP_4 7 24-31 !
01977 ! Unused 7 32-35 ! All zeros
01978 TAP_BYT_CNT_1 8 0-7 ! Num of bytes in act tape rec, 4 bytes
01979 TAP_BYT_CNT_2 8 8-15 !
01980 TAP_BYT_CNT_3 8 16-23 !
01981 TAP_BYT_CNT_4 8 24-31 !
01982 SHADOW_UNIT_1 8 0-7 ! (currently undefined), 2 bytes
01983 SHADOW_UNIT_2 8 8-15 !
01984 SHADOW_STAT_1 8 16-23 ! (currently undefined), 2 bytes
01985 SHADOW_STAT_2 8 24-31 !
01986 ! Unused 8 32-35 ! All zeros
01987 UNIT_SIZ_1 9 0-7 ! Number logical blocks in host area of
01988 UNIT_SIZ_2 9 8-15 ! unit, 4 bytes
01989 UNIT_SIZ_3 9 16-23 !
01990 UNIT_SIZ_4 9 24-31 !
01991 TRK_SIZ_1 9 0-7 ! # logical blocks in a track, 2 bytes
01992 TRK_SIZ_2 9 8-15 !
01993 GRP_SIZ_1 9 16-23 ! # tracks in a group, 2 bytes
01994 GRP_SIZ_2 9 24-31 !
01995 ! Unused 9 32-35 ! All zeros
01996 N_VOL_SER_NUMBER_1 10 0-7 ! Low order 32 bits of vol S/N, 4 bytes
01997 N_VOL_SER_NUMBER_2 10 8-10 !
01998 N_VOL_SER_NUMBER_3 10 16-23 !
01999 N_VOL_SER_NUMBER_4 10 24-31 !
02000 CYL_SIZ_1 10 0-7 ! Number of groups / cylinder, 2 bytes
02001 CYL_SIZ_2 10 8-10 !
02002 N_USVRSN 10 16-23 ! u-code version of unit
02003 N_UHVRSN 10 24-31 ! Hardware version unit
02004 ! Unused 10 32-35 ! All zeros
02005 RCT_SIZ_1 11 0-7 ! Replacment & cache table siz, 2 bytes
02006 RCT_SIZ_2 11 8-15 !
02007 RBNS 11 16-23 ! Number of replacement blocks/track
02008 COPIES 11 24-31 ! Number of copies of RCT on unit
02009 ! Unused 11 32-35 ! All zeros
02010 END TABLE
02011
02012
02013 !++
02014 ! HSC50 Error Packet
02015 !--
02016
02017 ENTRY TOPS10 TOPS20
02018 243 HSC50_ERROR_PACKET
02019 KLIPA_PORT 0 0-17 ! KLIPA Channel #
02020 HSC_NODE 0 18-35 ! HSC50 CI node #
02021 MSCP_ERROR_PACKET 1 BODY-F ! MSCP error packet definition
02022 END ENTRY
02023
02024
02025 !++
02026 ! Generic MSCP Error Message Format
02027 !
02028 ! All information is in swapped 32-bit byte format
02029 ! i.e. Byte 0 in bits 0-7 (LSB)
02030 ! 1 8-15
02031 ! 2 16-23
02032 ! 3 24-31 (MSB)
02033 ! Unused 32-35 (All zeros)
02034 !--
02035
02036 TABLE TOPS20
02037 MSCP_ERROR_PACKET ! Generic Error Log Message format
02038 CMD_REF_NUM_A 0 0-35 ! Address of error packet
02039 CMD_REF_NUM 0 0-31 ! Command reference number, 4 bytes
02040 ! 0 if no related command
02041 UNIT_NUMBER 1 0-15 ! Unit being accessed (decimal) 2 bytes
02042 ! 0 if no specific unit
02043 UNIT_NUMBER_L 1 0-7
02044 UNIT_NUMBER_H 1 8-15
02045 SEQUENCE_NUM 1 16-31 ! Error log sequence number, 2 bytes
02046 FORMAT 2 0-7 ! Error log message format
02047 FLAGS 2 8-15 ! Error log message flags
02048 STATUS_EVENT_CODE 2 16-31 ! Specific error or event code, 2 bytes
02049 STAT_EVNT_CODE_L 2 16-23
02050 STAT_EVNT_CODE_H 2 24-31
02051 CNTLR_ID_L 3 0-31 ! Controller identifier - low 4 bytes
02052 CNTLR_ID_H 4 0-31 ! Controller identifier - high 4 bytes
02053 CNTLR_DEV_NUM_L 3 0-31 ! Unique device number - low 4 bytes
02054 CNTLR_DEV_NUM_H 4 0-15 ! Unique device number - high 2 bytes
02055 CNTLR_MODEL 4 16-23 ! Controller model
02056 CNTLR_CLASS 4 24-31 ! Controller class
02057 CSVRSN 5 0-7 ! Controller software (ucode) version
02058 CHVRSN 5 8-15 ! Controller hardware revision number
02059 MULTI_UNIT_CODE 5 16-31 ! Code for related unit, 2 bytes
02060 UNIT_ID_L 6 0-31 ! Unit identifier - low 4 bytes
02061 UNIT_ID_H 7 0-31 ! Unit identifier - high 4 bytes
02062 UNIT_DEV_NUM_L 6 0-31 ! Unique device number - low 4 bytes
02063 UNIT_DEV_NUM_H 7 0-15 ! Unique device number - high 2 bytes
02064 UNIT_MODEL 7 16-23 ! Unit model
02065 UNIT_CLASS 7 24-31 ! Unit class
02066 USVRSN 8 0-7 ! Unit software (ucode) version
02067 UHVRSN 8 8-15 ! Unit hardware revision number
02068 ! Format dependent 8 16-31
02069 VOL_SERIAL_NUM 9 0-31 ! Low order 32 bits of S/N, 4 bytes
02070 ! Format dependent 10-??
02071
02072
02073 !++
02074 !
02075 ! ERROR FORMAT DEPENDENT DATA
02076 !
02077 !--
02078 !++
02079 !
02080 ! Disk Transfer Error
02081 !
02082 !--
02083 LEVEL 8 16-23 ! Level used for most recent recovery
02084 ! attempt
02085 DSK_RETRY 8 24-31 ! Controller retry count for disk
02086 HEADER_CODE 10 0-31 ! Physical disk error location, 4 bytes
02087 ! DSK_CNTRLR_DEP 11 BODY-F !disk or controller dependent info
02088
02089 !++
02090 !
02091 ! "SDI" ERROR
02092 !
02093 !--
02094 R_VOL_SER_NUMBER_1 9 0-7 !low order 32 bits of vol ser #, byte 1
02095 R_VOL_SER_NUMBER_2 9 8-15 !low order 32 bits of vol ser #, byte 2
02096 R_VOL_SER_NUMBER_3 9 16-23 !low order 32 bits of vol ser #, byte 3
02097 R_VOL_SER_NUMBER_4 9 24-31 !low order 32 bits of vol ser #, byte 4
02098 SDI_WRD_1 11 0-31 ! GET STATUS bytes 4-7
02099 SDI_WRD_2 12 0-31 ! GET STATUS bytes 8-11
02100 SDI_WRD_3 13 0-31 ! GET STATUS bytes 12-15
02101
02102 !++
02103 !
02104 ! CONTROLLER ERROR (DISK)
02105 !
02106 !--
02107
02108 !++
02109 !
02110 ! HOST MEMORY ACCESS ERRORS WITH BUS ADDRESS (DISK):
02111 !
02112 !--
02113
02114 HOST_MEM_ADDR 6 0-31 ! Host memory address at error, 4 bytes
02115
02116 !++
02117 !
02118 ! SMALL DISK ERROR
02119 !
02120 !--
02121 CYLINDER_1 8 16-23 !cylinder being accessed at err, byte 1
02122 CYLINDER_2 8 24-31 !cylinder being accessed at err, byte 2
02123
02124 !++
02125 !
02126 ! CONTROLLER ERROR (TAPE)
02127 !
02128 !--
02129
02130 !++
02131 !
02132 ! HOST MEMORY ACCESS ERRORS WITH BUS ADDRESS (TAPE)
02133 !
02134 !--
02135
02136 !++
02137 !
02138 ! TAPE TRANSFER ERROR
02139 !
02140 !--
02141 TPE_RETRY_1 8 16-23 !cntrlr retry cnt fo tape, byte 1
02142 TPE_RETRY_2 8 24-31 !cntrlr retry cnt fo tape, byte 2
02143 ! RESERVED 8 32-35 !reserved, all zeros
02144
02145 !++
02146 !
02147 ! "STI" ERROR
02148 !
02149 !--
02150 STI_WRD_1_1 11 0-7 !word 1 of STI info, byte 1
02151 STI_WRD_1_2 11 8-15 !word 1 of STI info, byte 2
02152 STI_WRD_1_3 11 16-23 !word 1 of STI info, byte 3
02153 STI_WRD_1_4 11 24-31 !word 1 of STI info, byte 4
02154 ! RESERVED 11 32-35 !reserved, all zeros
02155 STI_WRD_2_1 12 0-7 !word 2 of STI info, byte 1
02156 STI_WRD_2_2 12 8-15 !word 2 of STI info, byte 2
02157 STI_WRD_2_3 12 16-23 !word 2 of STI info, byte 3
02158 STI_WRD_2_4 12 24-31 !word 2 of STI info, byte 4
02159 ! RESERVED 12 32-35 !reserved, all zeros
02160 STI_WRD_3_1 13 0-7 !word 3 of STI info, byte 1
02161 STI_WRD_3_2 13 8-15 !word 3 of STI info, byte 2
02162 STI_WRD_3_3 13 16-23 !word 3 of STI info, byte 3
02163 STI_WRD_3_4 13 24-31 !word 3 of STI info, byte 4
02164 ! RESERVED 13 32-35 !reserved, all zeros
02165
02166 !++
02167 !
02168 ! ? ERROR
02169 !
02170 !--
02171
02172 OBJ_CNT_1 9 0-7 !object cnt at which tape err occurred, byte 1
02173 OBJ_CNT_2 9 8-15 !object cnt at which tape err occurred, byte 2
02174 OBJ_CNT_3 9 16-23 !object cnt at which tape err occurred, byte 3
02175 OBJ_CNT_4 9 24-31 !object cnt at which tape err occurred, byte 4
02176 ! RESERVED 9 32-35 !reserved, all zeros
02177 END TABLE
02178
02179 !++
02180 ! KLIPA Event (CI or NI)
02181 !--
02182
02183 ENTRY TOPS10 TOPS20
02184 244 KLIPA
02185 CSR_REG 0 0-35 ! CONI STATUS
02186 NI_FLAG 1 0 ! 0 for CI, 1 for NI
02187 KLIPA_CHAN 1 15-17 ! KLIPA Channel #
02188 UCODE_VER 1 18-35 ! ucode version
02189 U_STATUS 2 0-35 ! 0 if continued
02190 ! Date/time of last error if aborted
02191 CRAM_ADDR 3 24-35 ! cram address
02192 CRAM_DATA_L 4 6-35 ! first 30 bits of cram data
02193 CRAM_DATA_R 5 6-35 ! next 30 bits of cram data
02194 CHAN_LOGO0 6 0-35 ! channel logout word 0
02195 CHAN_LOGO1 7 0-35 ! channel logout word 1
02196 CHAN_LOGO2 8 0-35 ! channel logout word 2
02197 CCW1 9 0-35 ! first chan control word
02198 ! Port's error word
02199 END ENTRY
02200
02201 !++
02202 !
02203 ! MSCP Message Error
02204 !
02205 !--
02206 ENTRY TOPS20
02207 245 MSCP_ERROR
02208 MSCP_STATUS 0 0-35 ! MSCP status code
02209 END ENTRY
02210
02211 !++
02212 !
02213 ! DIAGNOSTIC ENTRY (EVENT CODE 250)
02214 !
02215 !--
02216 ENTRY TOPS20
02217 250 DIAGNOSTIC
02218 FIRST_RFB_HEADER 0 0-35 ! See RFB.EYE for more definitions
02219 END ENTRY
02220
02221 !++
02222 !
02223 ! LOGGER/AVAIL entry definitions
02224 !
02225 !--
02226
02227 ENTRY TOPS20
02228 500 LOGGER
02229 LGR_DATA_BLOCK 0 MAIN-F
02230 LGR_COUNT 0 0-17 ! block size
02231 LGR_CR_MSEC 1 0-35 ! block creation time (milliseconds)
02232 LGR_WR_MSEC 2 0-35 ! block write time
02233 LGR_ADDRESS 3 0-35 ! "monitor" address of this block
02234 LGR_BLOCK_ID 4 0-8 ! block type code
02235 LGR_CHANNEL 4 9-17 ! device channel number
02236 LGR_KONTROLLER 4 18-26 ! device kontroller number
02237 LGR_UNIT 4 27-35 ! device unit number
02238 END ENTRY
02239
02240 ! TABLES FOR LOGGER ENTRIES
02241
02242 TABLE TOPS20
02243 LGR_DATA_BLOCK
02244 LGR_TABLE_COUNT 0 0-35 ! number of GETAB subtables
02245 LGR_TABLE_ID 1 0-17 ! GETAB number of this table
02246 LGR_TABLE 1 MAIN+F ! define subtable format
02247
02248 ! ... GETAB data block format ...
02249 ! IDSYS = %O'14', System GETAB data
02250 ! IDSUB = %O'15', Subsystem GETAB data
02251 ! ...
02252 ! Monitor name block (IDNAM = %O'13')
02253
02254 SYS_BUILD_DATE 0 0-35 ! monitor build date/time
02255 SYS_NAME 1 0-35 ! ASCIZ text string starts here
02256
02257 ! System/Program data block (IDPGM = %O'23')
02258
02259 LGR_VERSION 0 0-35 ! LOGGER version number
02260 LGR_WAKEUP_COUNTER 6 0-35 ! number of times LOGGER has run
02261 LGR_START_UDT 7 0-35 ! startup date/time
02262 LGR_START_MSEC 8 0-35 ! startup system runtime
02263 LGR_WAKEUP_UDT 9 0-35 ! wakeup date/time
02264 LGR_WAKEUP_MSEC 10 0-35 ! wakeup system runtime
02265 LGR_TIME_CHANGE_UDT 16 0-35 ! total date/time change (UDT)
02266 MONITOR_VERSION 17 0-35 ! monitor version number
02267 LGR_SCHED_DOWN 34 0-35 ! scheduled downtime
02268 LGR_SCHED_UP 35 0-35 ! scheduled uptime
02269 END TABLE
02270
02271 TABLE TOPS20
02272 LGR_TABLE ! .. sub table format (GETAB data) ...
02273 LGR_TABLE_SIZE 0 0-17 ! number of words in this table
02274 LGR_TABLE_GTB 0 18-35 ! GETAB # of this table (self-check)
02275 LGR_TABLE_DATA 1 0-35 ! fullword data ...
02276 ! NOTE: descriptions of indivdual tables can be found
02277 ! in the TOPS20 Monitor Calls Reference Manual
02278 ! section 2.3.2 System Tables
02279 ! and Appendix B (which defines the symbolic table names)
02280 END TABLE
02281
02282 ENTRY TOPS10
02283 44 AVAIL_RELOAD
02284 SYS_NAME 0 MAIN$Z ! pointer to monitor name
02285 MONITOR_VERSION 1 0-35 ! monitor version
02286 MONITOR_RUNTIME 2 0-35 ! monitor runtime
02287 DAEMON_WAKEUP 3 0-35 ! date/time DAEMON last woke up
02288 RELOAD_DATE_TIME 4 0-35 ! date/time of this reload
02289 RELOAD_WHY_SIXBIT 5 0-35 ! SIXBIT reload reason code
02290 TIME_CHANGE 6 0-35 ! total date/time change
02291 END ENTRY
02292
02293 ENTRY TOPS10
02294 46 AVAIL_BOF
02295 DAEMON_VERSION 0 0-35 ! DAEMON version number
02296 END ENTRY
02297
02298 ENTRY TOPS10
02299 47 AVAIL_EOF
02300 DAEMON_VERSION 0 0-35 ! DAEMON version number
02301 END ENTRY
02302
02303
02304 !++
02305 ! The following tables represent a finer definition of
02306 ! entries recorded by TOPS-10 and TOPS-20.
02307 !--
02308
02309 TABLE TOPS10 TOPS20
02310 AC_BLOCK_6_DATA ! Saved ACs from block 6
02311 AC0 0 0-35
02312 AC1 1 0-35
02313 AC2 2 0-35
02314 AC3 3 0-35
02315 AC12 4 0-35
02316 END TABLE
02317
02318 TABLE TOPS10 TOPS20
02319 AC_BLOCK_7_DATA ! Saved ACs from block 7
02320 AC0 0 0-35
02321 AC1 1 0-35
02322 AC2 2 0-35
02323 END TABLE
02324
02325 TABLE TOPS10 TOPS20
02326 CHN_LOGOUT_LIST ! Holds logout blocks for 8 channels.
02327 CHN_LOGOUT,_0 0 BODY-F
02328 CHN_LOGOUT,_1 4 BODY-F
02329 CHN_LOGOUT,_2 8 BODY-F
02330 CHN_LOGOUT,_3 12 BODY-F
02331 CHN_LOGOUT,_4 16 BODY-F
02332 CHN_LOGOUT,_5 20 BODY-F
02333 CHN_LOGOUT,_6 24 BODY-F
02334 CHN_LOGOUT,_7 28 BODY-F
02335 END TABLE
02336
02337 TABLE TOPS10 TOPS20
02338 CHN_LOGOUT ! Format of channel logout block for each channel
02339 INIT_CHN_COMMAND 0 0-35
02340 CHN_STATUS_WORD 1 0-35
02341 LAST_COMMAND 2 0-35
02342 RESERVED_WORD 3 0-35
02343 END TABLE
02344
02345 !---------------------------------------------------------------
02346
02347 !++
02348 !
02349 ! TM10B controller status block
02350 !
02351 !--
02352
02353 TABLE TOPS10
02354 CSB_TM10
02355 TM10_TMC 0 0-35 ! CONI TMC
02356 TM10_TMS 1 0-35 ! CONI TMS
02357 END TABLE
02358
02359 WORD_10 TOPS10
02360 TM10_TMS
02361 TM10_CTL_PAR 11 ! Control word parity error
02362 TM10_NXM 12 ! No such memory
02363 TM10_MEM_PAR 13 ! Memory data parity error
02364 TM10_UNI_HNG 18 ! Unit hung
02365 TM10_ILL_OP 21 ! Illegal operation
02366 TM10_PAR_ERR 22 ! Tape parity error
02367 TM10_CMP_ERR 25 ! Read compare error
02368 TM10_LEN_ERR 26 ! Record length differs
02369 TM10_DAT_LAT 27 ! Data late
02370 TM10_BAD_TAP 28 ! Bad tape
02371 END WORD_10
02372
02373 !++
02374 !
02375 ! DX10 controller status block
02376 !
02377 !--
02378
02379 TABLE TOPS10
02380 CSB_DX10
02381 RBC 0 0-35 ! BYTE COUNT
02382 TAG 1 0-35 ! TAG LINES ,, BUS LINES
02383 DAC 2 0-35 ! DAC BITS 14 THRU 35
02384 FEATURE_REG 3 0-35 !
02385 UCODE_VERSION 3 0-5 ! Micro-code version #
02386 UCODE_EDIT 3 6-17 ! Micro-code edit #
02387 ! FEATURE_REG 3 18-35 ! Feature register
02388
02389 !++
02390 !
02391 ! THESE BYTES ARE IN THE FORMAT:
02392 ! BYTE 0 = BITS 2 - 9
02393 ! BYTE 1 = BITS 10-17
02394 ! BYTE 2 = BITS 20-27
02395 ! BYTE 3 = BITS 28-35
02396 ! VALUES ARE SUPPLIED FROM DX20 WITH VER 100 OR LATER OF U-CODE AS LONG AS
02397 ! DX20 IS STILL RUNNING. VALUES ARE THOSE DETECTED AT TIME OF THE ERROR.
02398 !
02399 !--
02400
02401 ASENSE_BYTES 4 0-35 ! Sense bytes 0-3
02402 BSENSE_BYTES 5 0-35 ! 4-7
02403 CSENSE_BYTES 6 0-35 ! 8-11
02404 DSENSE_BYTES 7 0-35 ! 12-15
02405 ESENSE_BYTES 8 0-35 ! 16-19
02406 FSENSE_BYTES 9 0-35 ! 20-23
02407 CONI 10 0-35 ! CONI DX10
02408 STATUS_WORD_1 11 0-35 ! ICPC + 1 (STATUS WORD)
02409 DX10_DSR 11 0-7 ! Device status register
02410 DX10_CSR 11 8-19 ! Channel status register
02411 DX10_SEQ_ERR 11 22-27 ! Sequence error code
02412 DX10_DAR 11 28-35 ! Device address register
02413 STATUS_WORD_2 12 0-35 ! ICPC + 2 (STATUS WORD)
02414 DX10_BC_OF 12 0 ! ?
02415 DX10_BYTE_CTR 12 1-13 ! Byte counter
02416 DX10_CPC 12 14-35 ! Channel program counter
02417 DX10_LAST_REC 13 12-35 ! Last record (block) length
02418 CHANNEL_CMD_WD 14 0-35 !
02419 CHANNEL_CMD_WD_2 15 0-35 !
02420 MD 16 0-35 ! MD AND CPMA
02421 DR_REG 17 0-35 !
02422 DAG 18 0-35 ! DIAGN FAILURE CODE
02423 MR1 19 0-35 ! DX MEM REG 10 & 11
02424 END TABLE
02425
02426 WORD_10 TOPS10
02427 CONI
02428 DX10_MP_ERR 26 ! MICROPROCESSOR ERROR
02429 DX10_MEM_PAR 27 ! DX10 MEMORY PARITY ERROR
02430 DX10_NXM 28 ! NXM
02431 END WORD_10
02432
02433 WORD_10 TOPS10
02434 DX10_DSR
02435 DSR_ATTN 28 ! Attention
02436 DSR_STAT_MOD 29 ! Status modifier
02437 DSR_CU_END 30 ! Control unit end
02438 DSR_BUSY 31 !
02439 DSR_CHAN_END 32 ! Channel end
02440 DSR_DEV_END 33 ! Device end
02441 DSR_UNIT_CHK 34 ! Unit check
02442 DSR_UNIT_EXCEPT 35 ! Unit exception
02443 END WORD_10
02444
02445 WORD_10 TOPS10
02446 DX10_CSR
02447 CSR_PRG_STAT 24 ! Program status
02448 CSR_TYPE 25-26 ! Cause/type of last status in DSR
02449 CSR_SEL_ERR 27 ! Device didn't respond
02450 CSR_SEQ_ERR 28 ! Sequence error
02451 CSR_PAR_ERR 29 ! Device parity error
02452 CSR_LEN_ERR 30 ! Length error
02453 CSR_IGN_LEN_ERR 31 ! Ignore length error
02454 CSR_UNUSED 32 !
02455 CSR_DSR_FLAG 33 ! Bit of interest in DSR
02456 CSR_SBYTE_RD_ERR 34 ! Error while reading sense byte
02457 CSR_OPI 35 ! Operation incomplete
02458 END WORD_10
02459
02460 !++
02461 !
02462 ! TM02 controller status block
02463 !
02464 !--
02465
02466 TABLE TOPS10
02467 CSB_TM02
02468 CONI_INITIAL 0 0-35
02469
02470 RHCS1_ERR 0 2-17 ! LH = RH11 CONTROL & STATUS 2
02471 RHCS2_ERR 0 20-35 ! RH = RH11 CONTROL & STATUS 1.
02472 CHAN_CNTRL_STAT 0 0-35 ! LH = LH CHANNEL STATUS 0 (RH20)
02473 ! RH = CONI RH for RH10/20
02474
02475 PTCR 1 0-35 ! RH20 PRIMARY TRANSFER CONTROL REG
02476 ! RH10 DATAI RHCR
02477 UBA_STATUS 1 0-35 ! RH11 UBA STATUS REGISTER
02478 UBA_STATUS_ERR 1 18-35 ! USED BY SUMMARIZE
02479 PBAR 2 0-35 ! RH20 PRIMARY BLOCK ADDRESS REGISTER
02480 ! RH10 DATAI RHDB
02481 UBA_MAP 2 0-35 ! RH11 UBA MAP REGISTER.
02482 LAST_COMMAND 3 0-35 ! LAST COMMAND ISSUED
02483 ! Unknown 4 0-17 !
02484 MB_CR 4 18-35 ! DEVICE CONTROL REGISTER
02485 ! Unknown 5 0-17 !
02486 MB_DS 5 18-35 ! DEVICE STATUS REGISTER
02487 ! Unknown 6 0-17 !
02488 MB_ERR 6 18-35 ! DEVICE ERROR REGISTER
02489 ! Unknown 7 0-17 !
02490 MB_MR 7 18-35 ! MAINTENANCE REGISTER
02491 ! Unknown 8 0-17 !
02492 MB_AS 8 18-35 ! ATTENTION SUMMARY REGISTER
02493 ! Unknown 9 0-17 !
02494 MB_FR_CNT 9 18-35 ! FRAME COUNT REGISTER
02495 ! Unknown 10 0-17 !
02496 MB_DT 10 18-35 ! DRIVE TYPE REGISTER
02497 ! Unknown 11 0-17 !
02498 MB_CHK_SUM 11 18-35 ! CHECKSUM REGISTER
02499 ! Unknown 12 0-17 !
02500 MB_SN 12 18-35 ! DRIVE SERIAL NUMBER REGISTER
02501 ! Unknown 13 0-17 !
02502 MB_TC 13 18-35 ! TAPE CONTROL REGISTER
02503 END TABLE
02504
02505 !++
02506 !
02507 ! TM78 controller status block
02508 !
02509 !--
02510
02511 TABLE TOPS10
02512 CSB_TM78
02513 TM78_U_CODE_REVS,_10 0 BODY-F ! TU78 U-CODE REVISION LEVELS (2 WORDS)
02514 CONI_INITIAL 2 0-35 ! RH20 CONI to fit SUMMARIZE defs
02515 CONI 2 0-35 ! RH20 CONI
02516 PTCR 3 0-35 ! RH20 PRIMARY TRANSFER CONTROL REG
02517 PBAR 4 0-35 ! RH20 PRIMARY BLOCK ADDRESS REGISTER
02518 LAST_COMMAND 5 0-35 ! LAST COMMAND ISSUED
02519 TM78_CAS_REGS,_10 6 BODY-R ! CAS REGISTERS 0-21 FOR TU78
02520 TM78_SENSE_BYTES,_10 24 BODY-F ! 60 8-BIT BYTES IN 15 WORDS
02521 END TABLE
02522
02523 !++
02524 ! TM78 micro-code version
02525 !__
02526
02527 TABLE TOPS20
02528 TM78_U_CODE_REVS
02529 UCODE_1 0 0-35
02530 UCODE_2 1 0-35
02531 END TABLE
02532
02533 !++
02534 !
02535 ! TM78 Masbuss Registers (Common Address Space)
02536 ! First 2 bits unused
02537 !
02538 !--
02539
02540 TABLE TOPS10 TOPS20
02541 TM78_CAS_REGS
02542 CMD_CAS_0 0 ! 20-35 ! Data transfer function reg.
02543 DST_CAS_1 1 ! 20-35 ! Interrupt and failure code reg.
02544 CNT_CAS_2 2 ! 20-35 ! Record count, skip count amd format
02545 DG1_CAS_3 3 ! 20-35 ! Error msg nr and diag test nr.
02546 ATN_CAS_4 4 ! 20-35 ! Attention bits
02547 BCT_CAS_5 5 ! 20-35 ! Byte count. When this register is
02548 ! used in a write or write with
02549 ! extended IRG operation it is set by
02550 ! the program to the 2's complement
02551 ! of the number of bytes to be written
02552 ! on tape. This register becomes 0
02553 ! after the last byte of the record
02554 ! has been read from memory. When
02555 ! this register is used in a read
02556 ! operation, it is set to a number
02557 ! equal to or greater than the 2's
02558 ! comlement of the number of bytes
02559 ! to be loaded into memory. A record
02560 ! length error occurs for long records
02561 ! only. This happens when a read pulse
02562 ! for data occurs and the Word Count
02563 ! Register is 0.
02564 ! When the Byte Count Register is used
02565 ! in a space forward or space reverse
02566 ! operation, it is set to the 2's
02567 ! complement of the number of records
02568 ! to be spaced.
02569 DTR_CAS_6 6 ! 20-35 ! Drive type (101) in bits 8-0
02570 STA_CAS_7 7 ! 20-35 ! Drive status reg. or Sense reg.
02571 SER_CAS_10 8 ! 20-35 ! Serial no. reg.
02572 DG2_CAS_11 9 ! 20-35 ! Diagnostic reg.
02573 DG3_CAS_12 10 ! 20-35 ! Diagnostic reg.
02574 NST_CAS_13 11 ! 20-35 ! Non-data transfer int. code
02575 NC1_CAS_14 12 ! 20-35 ! Tape control register.
02576 ! Non_data transfer function code 0
02577 ! There are four tape control
02578 ! registers one register for each
02579 ! transport.
02580 NC2_CAS_15 13 ! 20-35 ! Non_data transfer function code 1
02581 NC3_CAS_16 14 ! 20-35 ! Non_data transfer function code 2
02582 NC4_CAS_17 15 ! 20-35 ! Non_data transfer function code 3
02583 MPA_CAS_20 16 ! 20-35 ! u-code internal address
02584 ! The Internal Address Register contains
02585 ! the address of the current address
02586 ! being asserted by the microcomputer.
02587 MPD_CAS_21 17 ! 20-35 ! Control register
02588 END TABLE
02589
02590 WORD_11 COMMON
02591 CMD_CAS_0
02592 CMD_SPL_COND 15 ! Special condition. Read only. Set
02593 ! by TRE, ATTN, or I/O bus control
02594 ! parity error. Cleared by Unibus A
02595 ! INIT, controller clear, or by
02596 ! removing the ATTN condition.
02597 CMD_TRAN_ERR 14 ! Transfer error. Read/write. Set by
02598 ! DLT, WCE, UPE, NED, NEM, PGE, MXF,
02599 ! MDPE, or a drive error during a
02600 ! data transfer. Cleared by Unibus A
02601 ! INIT, controller clear, error clear,
02602 ! or loading a data transfer command
02603 ! with GO set.
02604 CMD_MCPE 13 ! Mass I/O bus control bus parity
02605 ! error Read only. Set by parity error
02606 ! on control bus while writing a
02607 ! remote register. Cleared by TM
02608 ! clear.
02609 ! Parity errors that occur on the I/O
02610 ! control bus while writing a drive
02611 ! register are detected by the drive
02612 ! and cause the PAR error
02613 ! (Error reg. bit 03) to set.
02614 ! Bit 12 not used. Always zero.
02615 CMD_DR_AVAIL 11 ! Drive available. Read only. Always
02616 ! a 1 in the TM78 when read from an
02617 ! existing drive.
02618 CMD_PORTSEL 10 ! When PSEL = 1, data transfer is via
02619 ! Unibus B; when PSEL = 0, data transfer
02620 ! is via Unibus A. Cleared by Unibus
02621 ! A INIT, controller clear, or by
02622 ! writing a 0 in this bit position.
02623 CMD_A17 09 ! Upper extension bits of the BUS
02624 CMD_A16 08 ! Address Register. Cleared by Unibus
02625 ! A INIT, controller clear or by
02626 ! writing 0s in these bit positions.
02627 CMD_READY_DT 07 ! RDY normally = 1. During data
02628 ! transfers, RDY = 0.
02629 ! When a data transfer command code
02630 ! is written into the control and
02631 ! status register RDY is reset. At
02632 ! the termination of the data transfer,
02633 ! RDY is set.
02634 CMD_INT_EN 06 ! Interrupt enable. IE is a control bit
02635 ! which can be set only under program
02636 ! control. When IE = 1, an interrupt
02637 ! may occur due to RDY or ATTN being
02638 ! asserted. Cleared by Unibus A INIT,
02639 ! controller clear, or automatically
02640 ! cleared when a interrupt is recognized
02641 ! by the CPU. When a 0 is written into
02642 ! IE by the program, pending interrupts
02643 ! are cancelled.
02644 CMD_FUNC_CODE 05-01 ! Function codes.
02645 CMD_GO_BIT 00 ! The GO bit must be set to cause the
02646 ! controller or drive to respond to a
02647 ! command. The GO bit is reset by the
02648 ! drive after command execution.
02649 END WORD_11
02650
02651 WORD_11 COMMON
02652 DST_CAS_1
02653 CAS_FAIL_CODE 15-10 ! Failure code on data transfer
02654 CAS_INT_CODE 05-00 ! Interrupt code on data transfer
02655 END WORD_11
02656
02657 WORD_11 COMMON
02658 CNT_CAS_2
02659 CNT_SER 15 ! If the TM78 detects an error that
02660 ! requires a retry, the tape will be
02661 ! repositioned for the retry operation
02662 ! unless SER is set. If SER is not
02663 ! set, the TM78's error recovery
02664 ! algorithms inform the host CPU of
02665 ! the next operation to perform via
02666 ! the interrupt code.
02667 CNT_FORMAT 14-12 ! The FORMAT field defines the manner
02668 ! in which tape bytes are assembled
02669 ! to/from the host CPU words. The
02670 ! following is a list of the possible
02671 ! formats
02672 ! FORMAT MODE
02673 ! 000 11 NORMAL
02674 ! 001 15 NORMAL
02675 ! 010 10 Compatible
02676 ! 011 10 Core Dump
02677 ! 100 10 High Density
02678 ! Compatible
02679 ! 101 Image
02680 ! 110 10 High Density Dump
02681 CNT_SKIP_CNT 11-08 ! Skip Count is used during tape read
02682 ! operations to zero-fill the specified
02683 ! number of byte positions before
02684 ! reading the first data byte. These
02685 ! zero-filled bytes are transferred
02686 ! from the TM78 even if no data bytes
02687 ! are read(because of an error).
02688 CNT_REC_CNT 07-02 ! The Record Count specifies the
02689 ! number of record to read or write
02690 ! and may be any value in the range
02691 ! of 0 to 77 . When non-zero, it is
02692 ! 8
02693 ! decremented after every record that
02694 ! is correctly transferred.
02695 ! When record count is equal to zero
02696 ! the TM78 transfers records until
02697 ! stopped by the Massbus controller.
02698 ! The RH20, which has its own block
02699 ! counter, may be operated with REcord
02700 ! Count set to zero.
02701 ! Record Count is not decremented during
02702 ! unsuccessful error retry operations
02703 ! so it does not have to be reloaded
02704 ! after an error, unless the TM78 issues
02705 ! a read opposite interrupt code. In
02706 ! this case, the record count should be
02707 ! set to 0.
02708 CNT_CMD_ADR 01-00 ! Identifies the tape transport.
02709 END WORD_11
02710
02711 WORD_11
02712 DTR_CAS_6
02713 DTR_NSA 15 ! always 1
02714 DTR_TAP 14 ! always 1
02715 DTR_MOH 13 ! always 0
02716 DTR_7CH 12 ! always 0
02717 DTR_DMD 11 ! dual massbus option.
02718 ! If set this TM78 has the dual massbus
02719 ! ports option.
02720 ! bits 10-9 not used.
02721 ! The drive type code for a TU78 Tape
02722 ! drive is 101
02723 ! 8
02724 END WORD_11
02725
02726 WORD_11 COMMON
02727 STA_CAS_7
02728 STA_RDY 15 ! The tape unit has a tape mounted,
02729 ! is on-line, and not rewinding or
02730 ! performing a DSE.
02731 STA_PRES 14 ! The tape unit has power applied.
02732 STA_ON_L 13 ! The tape unit is on-line, and a tape
02733 ! is mounted.
02734 STA_REWIND 12 ! The tape unit is rewinding.
02735 STA_PE 11 ! WHen set, the tape unit is set foR
02736 ! PE recording format. When clear, the
02737 ! tape unit is set for GCR recording
02738 ! format.
02739 STA_BOT 10 ! The tape is positioned at load point.
02740 STA_EOT 09 ! The tape is positioned beyond the
02741 ! end-of-tape marker.
02742 STA_FPT 08 ! The tape unit is write protected.
02743 STA_AVAIL 07 ! The tape unit is available to this
02744 ! massbus.
02745 STA_SHR 06 ! The tape unit is available to both
02746 ! Massbus ports (shared)
02747 STA_MAINT 05 ! The tape unit is in maintenance mode,
02748 ! and may not be used.
02749 STA_DSE 04 ! The tape unit is performing the
02750 ! erase portion of DSE Command.
02751 END WORD_11
02752
02753 WORD_11
02754 NC1_CAS_14
02755 NC1_CMD_CNT 15-08 ! The command count specifies the
02756 ! number of times the command is to
02757 ! be repeated (up to 376, octal). If
02758 ! the operation terminates prematurely
02759 ! the command count contains the no.
02760 ! of operations that did not complete
02761 ! successfully. A command count of 0
02762 ! or 1 may be used to specify a single
02763 ! operation.
02764 ! The GO bit informs the TM78 that
02765 ! a new Command has been loaded. The
02766 ! GO bit is not intended to serve
02767 ! as a status bit as the readability
02768 ! is undefined.
02769 NC1_FUNC_CODE0 05-01 ! function code.
02770 END WORD_11
02771
02772 WORD_11 COMMON
02773 NC2_CAS_15
02774 NC2_CMD_CNT1 15-08 ! Command count
02775 FUNC_CODE1 05-01 ! Function code
02776 END WORD_11
02777
02778 WORD_11 COMMON
02779 NC3_CAS_16
02780 NC3_FUNC_CODE2 05-01 ! Function code
02781 END WORD_11
02782
02783 WORD_11 COMMON
02784 NC4_CAS_17
02785 NC4_CMD_CNT3 15-08 ! Command count
02786 NC4_FUNC_CODE3 05-01 ! Function code
02787 END WORD_11
02788
02789 WORD_11 COMMON
02790 MPD_CAS_21
02791 MPD_TM_RDY 15 ! TM RDY occurs after microcode
02792 ! initialization. New commands may
02793 ! not be loaded until TM RDY is set.
02794 MPD_TM_CLR 14 ! TM Clear initializes the TM78. This
02795 ! restarts the microcomputer and
02796 ! terminates any command that may have
02797 ! been previously loaded.
02798 MPD_CM_PE 13 ! A microcomputer Rom Parity error
02799 ! has occurred.
02800 MPD_ILR 12 ! A reference has been made to a
02801 ! non-existent massbus register address
02802 MPD_CPE 11 ! The TM78 has detected a parity error
02803 ! as a result of a write to some massbu
02804 ! register address.
02805 MPD_EV_PAR 10 ! A diagnostic bit which causes even
02806 ! parity to be generated and checked
02807 ! for on the massbus control bus.
02808 MPD_HLDA 09 ! The stopped condition is indicated
02809 ! by the HLDA bit being set after a
02810 ! small delay.
02811 MPD_HOLD 08 ! The microcomputer may be stopped by
02812 ! setting the HOLD bit.
02813 MPD_INT_DATA 07-00 ! If HLDA is not set, Internal Data
02814 ! always reads as a zero. If HLDA is
02815 ! set the Internal Address Structure
02816 ! of the TM78 maybe accessed via the
02817 ! Internal Address and Internal Data
02818 ! Registers. These then contain the
02819 ! current address being asserted by
02820 ! the microcomputer.
02821 END WORD_11
02822
02823 TABLE TOPS_10 TOPS_20
02824 TM78_SENSE_BYTES
02825 CMDCOD 0 10-17
02826 INTCOD 0 2-9
02827 FALCOD 0 28-35
02828 RPFAIL 0 20-27
02829 RPATH 1 10-17
02830 RSTAT 1 2-9
02831 RCMLP 1 28-35
02832 RAMT 1 20-27
02833 RDON 2 10-17
02834 RILL 2 2-9
02835 RMK2 2 28-35
02836 REND 2 20-27
02837 RPSTA 3 10-17
02838 RPOSTN 3 2-9
02839 RDATA 3 28-35
02840 CRCWRD 3 20-27
02841 ECCOR 4 10-17
02842 ECCSTA 4 2-9
02843 CH0TIE 4 28-35
02844 CH1TIE 4 20-27
02845 CH2TIE 5 10-17
02846 CH3TIE 5 2-9
02847 CH4TIE 5 28-35
02848 CH5TIE 5 20-27
02849 CH6TIE 6 10-17
02850 CH7TIE 6 2-9
02851 CHPTIE 6 28-35
02852 RTIER 6 20-27
02853 TAMT 7 10-17
02854 PSTAT 7 2-9
02855 PRDD 7 28-35
02856 CASSTA 7 20-27
02857 CBUSSTA 8 10-17
02858 DBUSSTA 8 2-8
02859 WMCSTA 8 28-35
02860 TUSEL0 8 20-27
02861 TUSEL1 9 10-17
02862 WRTDAT 9 2-9
02863 BYT1_CNT 9 28-35
02864 BYT2_CNT 9 20-27
02865 PAD1_CNT 10 10-17
02866 PAD2_CNT 10 2-9
02867 ERR1_CNT 10 28-35
02868 ERR2_CNT 10 20-27
02869 DDR_A 11 10-17
02870 DDR_B 11 2-9
02871 WMCERR 11 28-35
02872 INTSTA 11 20-27
02873 TUSTAT 12 10-17
02874 MIAA_STAT 12 2-9
02875 MIAB_STAT 12 28-35
02876 SER_A_NR 12 20-27
02877 SER_B_NR 13 10-17
02878 TUDIAG 13 2-9
02879 RET1_CNT 13 28-35
02880 RET2_CNT 13 20-27
02881 TUX 14 10-17
02882 XFRCTL 14 2-9
02883 XRETRY 14 28-35
02884 ENAON 14 20-27
02885 END TABLE
02886
02887 ! Sense byte 1
02888
02889 WORD_11 COMMON
02890 CMDCOD
02891 CMD_CODE 7 - 0 ! Command code being executed
02892 ! on last error.
02893 END WORD_11
02894
02895 ! Sense byte 2
02896
02897 WORD_11 COMMON
02898 INTCOD
02899 INT_CODE 7 - 0 ! Interrupt code from last error
02900 END WORD_11
02901
02902 ! Sense byte 3
02903
02904 WORD_11 COMMON
02905 FALCOD
02906 FAIL_CODE 7 - 0 ! Failure code from last error
02907 END WORD_11
02908
02909
02910 ! Sense byte 4 (M8950 via M8953)
02911
02912 WORD_11 COMMON
02913 RPFAIL
02914 WFAIL_0 00 ! Write fail bit from REad channel 0
02915 ! Write fail is an OR of certain
02916 ! error conditions namely:
02917 ! Illegal 5 to 4 translation
02918 ! AMTIE
02919 ! PHTIE
02920 ! Pointer mismatch
02921 WFAIL_1 01 ! Write fail bits from read channel 1
02922 ! Write fail is an OR of certain
02923 ! error conditions namely:
02924 ! Illegal 5 to 4 translation
02925 ! AMTIE
02926 ! PHTIE
02927 ! Pointer mismatch
02928 WFAIL_2 02 ! Write fail bits from read channel 2
02929 ! Write fail is an OR of certain
02930 ! error conditions namely:
02931 ! Illegal 5 to 4 translation
02932 ! AMTIE
02933 ! PHTIE
02934 ! Pointer mismatch
02935 WFAIL_3 03 ! Write fail bits from read channel 3
02936 ! Write fail is an OR of certain
02937 ! error conditions namely:
02938 ! Illegal 5 to 4 translation
02939 ! AMTIE
02940 ! PHTIE
02941 ! Pointer mismatch
02942 WFAIL_4 04 ! Write fail bits from read channel 4
02943 ! Write fail is an OR of certain
02944 ! error conditions namely:
02945 ! Illegal 5 to 4 translation
02946 ! AMTIE
02947 ! PHTIE
02948 ! Pointer mismatch
02949 WFAIL_5 05 ! Write fail bits from read channel 5
02950 ! Write fail is an OR of certain
02951 ! error conditions namely:
02952 ! Illegal 5 to 4 translation
02953 ! AMTIE
02954 ! PHTIE
02955 ! Pointer mismatch
02956 WFAIL_6 06 ! Write fail bits from read channel 6
02957 ! Write fail is an OR of certain
02958 ! error conditions namely:
02959 ! Illegal 5 to 4 translation
02960 ! AMTIE
02961 ! PHTIE
02962 ! Pointer mismatch
02963
02964 WFAIL_7 07 ! Write fail bits from read channel 7
02965 ! Write fail is an OR of certain
02966 ! error conditions namely:
02967 ! Illegal 5 to 4 translation
02968 ! AMTIE
02969 ! PHTIE
02970 ! Pointer mismatch
02971
02972 END WORD_11
02973
02974 ! Sense byte 5 (M5953)
02975
02976 WORD_11 COMMON
02977 RPATH
02978 WRITE_FAIL_P 00 ! Illegal 5 - 4 AMTIE, PHTIE or
02979 ! pointer mismatch for parity bit
02980 STAT_SELECT 01 ! True if TIE bus statistics are
02981 ! being sent to TIE bus
02982 CLOCK_STOPPED 02 ! True if Read Path clock is stopped
02983 BOP 03 ! Beginning of Preamble. True when Read
02984 ! path senses that the Preamble has
02985 ! just passed the Read Head.
02986 DATA_READY 04 ! Goes false when M8953 asserts data
02987 ! ready to M8951
02988 PREAMBLE_ERR 05 ! True if Preamble had AMTIE
02989 STATUS_VALID 06 ! M8953 status is valid (set after
02990 ! .1 inch gap found)
02991 VEL_OK 07 ! True if velocity is within 10%
02992 ! of 125 IPS or JAM velocity OK bit
02993 ! is set
02994 END WORD_11
02995
02996 ! Sense byte 6
02997
02998 WORD_11 COMMON
02999 RSTAT
03000 RMC_STATUS 7-0 ! Read path microcontroller status
03001 ! codes are returned in this byte.
03002 ! The following table identifies
03003 ! each code and its meaning:
03004 ! STATUS MEANING
03005 !
03006 ! Status resulting from ECC self test
03007 ! command
03008 ! 101 ECC sequencer passed self test
03009 ! 102 ECC sequencer failed self test
03010
03011 ! Status resulting from an M8953 self
03012 ! test
03013 ! 103 Read path passed self test
03014 ! 104 Read path failed self test
03015
03016 ! Status resulting from an M8950 self
03017 ! test
03018 ! 105 Read channel tests all passed
03019
03020 ! Status resulting from a clear all test ! command for velocity testing of drive
03021 ! by microcode
03022 ! 1 First tach pulse
03023 ! 201 Last tach pulse
03024
03025 ! Status resulting from a sample density
03026 ! command
03027 ! 210 Not Capable found
03028 ! 211 GCR ID found
03029 ! 212 PE ID found
03030
03031 ! Status resulting from a write test
03032 ! of IBG, PE ID, GCR ID, ARA ID, or
03033 ! ARA Burst.
03034 ! 220 Bad status (write test)
03035
03036 ! Status resulting from a tape mark
03037 ! test command
03038 ! 222 Good tape mark found on tape
03039 ! status
03040
03041 ! Status resulting a NON BOT command
03042 ! (read or write FWD or REV, GCR or PE)
03043 ! 230 ARA ID found (not record or TM)
03044 ! 231 Tape Mark found
03045 ! 234 Preamble end not found
03046 ! 235 Read path fault 1, too many
03047 ! M8950's have been fataled to
03048 ! continue record processing
03049 ! 236 Read path fault 2, 7 or more
03050 ! M8950 boards found illegal 5-4
03051 ! translations
03052 ! 241 Unexpected IBG in data;
03053 ! probably creased tape(7 or
03054 ! more AMTIES active)
03055 ! 261 Postamble long
03056 ! 262 Postamble short
03057 ! 377 OK
03058 END WORD_11
03059
03060 ! Sense byte 7( RMC commands Loop Back Register, M8953)
03061
03062 WORD_11 COMMON
03063 RCMLP
03064 RMC_CMD 7-0 ! Contains the last command sent to
03065 ! the M8953 via 'RCMD'
03066 ! The Read Microcontroller commands
03067 ! and their codes are:
03068 ! Code Task
03069 ! 00 NOP
03070 ! 01 Interblock read
03071 ! 02 Test PE ID burst
03072 ! 03 Test GCR ID burst
03073 ! 04 Test ARAID burst
03074 ! 05 Test TM
03075 ! 06 Test ARA burst
03076 ! 07 Normal NON_BOT read
03077 ! 10 Run RMC self test
03078 ! 11 Test unknown ID Burst
03079 ! 12 Run read channel micro's test
03080 ! 13 Diagnostic read command
03081 ! 14 Run read channel self test
03082 ! 15 Run clear all RMC test pgm
03083 ! 16 Run ECC self test pgm
03084 ! 17 Find gap
03085
03086 END WORD_11
03087
03088 ! Sense byte 8 (read channel AMTIE status ;location is tape transport
03089 ! via M8955, M8950, M8953)
03090
03091
03092 WORD_11 COMMON
03093 RAMT
03094 AMTIE 7-0 ! This reg. reflects the state of the
03095 ! AMTIE lines for channels 7 thro 0.
03096
03097 END WORD_11
03098
03099 ! Sense byte 9 (read channel DONE status; location is M8950's via M8953)
03100
03101 WORD_11 COMMON
03102 RDON
03103 NOT_DONE_0 0 ! This bit will be false if the
03104 ! associated M8950 has completed
03105 ! its assigned task.
03106 NOT_DONE_1 1 ! This bit will be false if the
03107 ! associated M8950 has completed
03108 ! its assigned task.
03109 NOT_DONE_2 2 ! This bit will be false if the
03110 ! associated M8950 has completed
03111 ! its assigned task.
03112 NOT_DONE_3 3 ! This bit will be false if the
03113 ! associated M8950 has completed
03114 ! its assigned task.
03115 NOT_DONE_4 4 ! This bit will be false if the
03116 ! associated M8950 has completed
03117 ! its assigned task.
03118 NOT_DONE_5 5 ! This bit will be false if the
03119 ! associated M8950 has completed
03120 ! its assigned task.
03121 NOT_DONE_6 6 ! This bit will be false if the
03122 ! associated M8950 has completed
03123 ! its assigned task.
03124 NOT_DONE_7 7 ! This bit will be false if the
03125 ! associated M8950 has completed
03126 ! its assigned task.
03127 END WORD_11
03128
03129 ! Sense byte 10 (read channel illegal status; location M8950 via M8953)
03130
03131 WORD_11 COMMON
03132 RILL
03133 ILL_0 0 ! This bit will be true if the
03134 ! associated M8950 indicates the
03135 ! following:
03136 ! GCR
03137 ! ---
03138 ! Data contained an illegal 5-bit code
03139 ! which was either an error or a tape
03140 ! format control character.
03141 ! PE
03142 ! --
03143 ! Data error such as no bit time phase
03144 ! transition.
03145 ILL_1 1 ! ''
03146 ILL_2 2 ! ''
03147 ILL_3 3 ! ''
03148 ILL_4 4 ! ''
03149 ILL_5 5 ! ''
03150 ILL_6 6 ! ''
03151 ILL_7 7 ! ''
03152
03153 END WORD_11
03154
03155 ! Sense byte 11 (read channel mark 2 status; location M8950's via M8953)
03156
03157 WORD_11 COMMON
03158 RMK2
03159 MK2_0 0 ! When true indicates that the
03160 ! associated M8950 has detected
03161 ! a 'MARK 2' tape format control
03162 ! character. If the corresponding
03163 ! 'illegal 5 to 4' bit is set (RILL reg)
03164 ! a MARK 2 was detected during 5 to 4
03165 ! conversion.
03166 MK2_1 1 ! ''
03167 MK2_2 2 ! ''
03168 MK2_3 3 ! ''
03169 MK2_4 4 ! ''
03170 MK2_5 5 ! ''
03171 MK2_6 6 ! ''
03172 MK2_7 7 ! ''
03173
03174 END WORD_11
03175
03176 ! Sense byte 12 (End mark for read channels; location M8950's via M8953)
03177
03178 WORD_11 COMMON
03179 REND
03180 END_0 0 ! END Mark for read channel 0
03181 END_1 1 ! END Mark for read channel 1
03182 END_2 2 ! END Mark for read channel 2
03183 END_3 3 ! END Mark for read channel 3
03184 END_4 4 ! END Mark for read channel 4
03185 END_5 5 ! END Mark for read channel 5
03186 END_6 6 ! END Mark for read channel 6
03187 END_7 7 ! END Mark for read channel 7
03188
03189 END WORD_11
03190
03191 ! Sense byte 13 (Parity Read Channel Status Byte M8950)
03192
03193 WORD_11 COMMON
03194 RPSTA
03195 AMTIE_P 00 ! Weak amplitude on parity bit
03196 NOT_DONE_P 01 ! Parity M8950 not done
03197 ILLEGAL_P 02 ! Illegal 5:4 for parity bit
03198 MK2P 03 ! Mark 2 detected for parity bit
03199 END_P 04 ! End Mark detected for parity bit
03200 POST_P 05 ! PE Postamble detected for parity bit
03201 DATA_P 06 ! M8950 data output for parity bit
03202 CORRECTED_DATA_P 07 ! ECC module corrected output data
03203 ! for parity bit
03204
03205 END WORD_11
03206
03207 ! Sense byte 14 (read channel PE postamble detect reg.;
03208 ! location is M8950's via M8953)
03209
03210 WORD_11 COMMON
03211 RPOSTN
03212 POST_0 0 ! In PE: contains the inverted data
03213 ! for the byte prior to the one
03214 ! currently on the data lines (RC3 D(N)
03215 ! H). It is used for PE postamble
03216 ! detection.
03217 ! Not used in GCR
03218 POST_1 1 ! ''
03219 POST_2 2 ! ''
03220 POST_3 3 ! ''
03221 POST_4 4 ! ''
03222 POST_5 5 ! ''
03223 POST_6 6 ! ''
03224 POST_7 7 ! ''
03225 END WORD_11
03226
03227
03228 ! Sense byte 15 (read channel data register; location M8950's via M8953)
03229
03230 WORD_11 COMMON
03231 RDATA
03232 DATA_ECC 7-0 ! Data output from M8950 to ECC
03233 ! (M8951)
03234 END WORD_11
03235
03236 ! Sense byte 16 (CRC word; location M8952)
03237
03238 WORD_11 COMMON
03239 CRCWRD
03240 CRC_0 0 ! CRC checker output bits
03241 CRC_1 1 ! CRC checker output bits
03242 CRC_2 2 ! CRC checker output bits
03243 CRC_3 3 ! CRC checker output bits
03244 CRC_4 4 ! CRC checker output bits
03245 CRC_5 5 ! CRC checker output bits
03246 CRC_6 6 ! CRC checker output bits
03247 CRC_7 7 ! CRC checker output bits
03248 END WORD_11
03249
03250
03251 ! Sense byte 17 (Corrected data register; location M8951)
03252
03253 WORD_11 COMMON
03254 ECCOR
03255 CD_0 0 ! Corrected data output from M8951 to
03256 ! M8952 module
03257 CD_1 1 ! ''
03258 CD_2 2 ! ''
03259 CD_3 3 ! ''
03260 CD_4 4 ! ''
03261 CD_5 5 ! ''
03262 CD_6 6 ! ''
03263 CD_7 7 ! ''
03264 END WORD_11
03265
03266 ! Sense byte 18 (ECC Status Byte M8951)
03267
03268 WORD_11 COMMON
03269 ECCSTA
03270 STEC 00 ! Single track error correction
03271 TTEC 01 ! Two track error correction
03272 UNC 02 ! Uncorrectable. ECC could not
03273 ! correct data error
03274 PM 03 ! Pointer Mismatch. The track in
03275 ! error did not have a pointer.
03276 ACRCERR 04 ! ACRC Error
03277 AMT 05 ! AMTIE occurred during data
03278 ! portion of record
03279 RPE 06 ! ECC ROM Parity Error
03280 CRCE 07 ! CRC Error
03281 END WORD_11
03282
03283
03284 ! Sense byte 19 (Channel 1 Track-in-error byte M8950)
03285
03286 WORD_11 COMMON
03287 CH0TIE
03288 STAT 00 ! STAT = 0, Pointer mismatch
03289 ! in GCR, 0 in PE
03290 ! STAT = 1, Any pointer occurred
03291 ! (both GCR and PE)
03292 PHTIE0 01 ! Phase Tie
03293 AMTIE0 02 ! AMTIE
03294 PEGCRTK 03 ! Illegal 5:4 in GCR
03295 ! Dead track in PE
03296 END WORD_11
03297
03298 ! Sense byte 20 (Channel 2 Track-in-error byte M8950)
03299
03300 WORD_11 COMMON
03301 CH1TIE
03302 STAT 00 ! STAT = 0, Pointer mismatch
03303 ! in GCR, 0 in PE
03304 ! STAT = 1, Any pointer occurred
03305 ! (both GCR and PE)
03306 PHTIE1 01 ! Phase Tie
03307 AMTIE1 02 ! AMTIE
03308 PEGCRTK 03 ! Illegal 5:4 in GCR
03309 ! Dead track in PE
03310 END WORD_11
03311
03312
03313 ! Sense byte 21 (Channel 3 Track-in-error byte M8950)
03314
03315 WORD_11 COMMON
03316 CH2TIE
03317 STAT 00 ! STAT = 0, Pointer mismatch
03318 ! in GCR, 0 in PE
03319 ! STAT = 1, Any pointer occurred
03320 ! (both GCR and PE)
03321 PHTIE2 01 ! Phase Tie
03322 AMTIE2 02 ! AMTIE
03323 PEGCRTK 03 ! Illegal 5:4 in GCR
03324 ! Dead track in PE
03325
03326 END WORD_11
03327
03328
03329 ! Sense byte 22 (Channel 4 Track-in-error byte M8950)
03330
03331 WORD_11 COMMON
03332 CH3TIE
03333 STAT 00 ! STAT = 0, Pointer mismatch
03334 ! in GCR, 0 in PE
03335 ! STAT = 1, Any pointer occurred
03336 ! (both GCR and PE)
03337 PHTIE3 01 ! Phase Tie
03338 AMTIE3 02 ! AMTIE
03339 PEGCRTK 03 ! Illegal 5:4 in GCR
03340 ! Dead track in PE
03341
03342 END WORD_11
03343
03344
03345 ! Sense byte 23 (Channel 5 Track-in-error byte M8950)
03346
03347 WORD_11 COMMON
03348 CH4TIE
03349 STAT 00 ! STAT = 0, Pointer mismatch
03350 ! in GCR, 0 in PE
03351 ! STAT = 1, Any pointer occurred
03352 ! (both GCR and PE)
03353 PHTIE4 01 ! Phase Tie
03354 AMTIE4 02 ! AMTIE
03355 PEGCRTK 03 ! Illegal 5:4 in GCR
03356 ! Dead track in PE
03357
03358 END WORD_11
03359
03360
03361 ! Sense byte 24 (Channel 6 Track-in-error byte M8950)
03362
03363 WORD_11 COMMON
03364 CH5TIE
03365 STAT 00 ! STAT = 0, Pointer mismatch
03366 ! in GCR, 0 in PE
03367 ! STAT = 1, Any pointer occurred
03368 ! (both GCR and PE)
03369 PHTIE5 01 ! Phase Tie
03370 AMTIE5 02 ! AMTIE
03371 PEGCRTK 03 ! Illegal 5:4 in GCR
03372 ! Dead track in PE
03373 END WORD_11
03374
03375
03376 ! Sense byte 25 (Channel 7 Track-in-error byte M8950)
03377
03378 WORD_11 COMMON
03379 CH6TIE
03380 STAT 00 ! STAT = 0, Pointer mismatch
03381 ! in GCR, 0 in PE
03382 ! STAT = 1, Any pointer occurred
03383 ! (both GCR and PE)
03384 PHTIE6 01 ! Phase Tie
03385 AMTIE6 02 ! AMTIE
03386 PEGCRTK 03 ! Illegal 5:4 in GCR
03387 ! Dead track in PE
03388 END WORD_11
03389
03390
03391
03392 ! Sense byte 26 (Channel 8 Track-in-error byte M8950)
03393
03394 WORD_11 COMMON
03395 CH7TIE
03396 STAT 00 ! STAT = 0, Pointer mismatch
03397 ! in GCR, 0 in PE
03398 ! STAT = 1, Any pointer occurred
03399 ! (both GCR and PE)
03400 PHTIE7 01 ! Phase Tie
03401 AMTIE7 02 ! AMTIE
03402 PEGCRTK 03 ! Illegal 5:4 in GCR
03403 ! Dead track in PE
03404 END WORD_11
03405
03406
03407 ! Sense byte 27 (Channel P Track-in-error byte M8950)
03408
03409 WORD_11 COMMON
03410 CHPTIE
03411 STAT 00 ! STAT = 0, Pointer mismatch
03412 ! in GCR, 0 in PE
03413 ! STAT = 1, Any pointer occurred
03414 ! (both GCR and PE)
03415 PHTIEP 01 ! Phase Tie
03416 AMTIEP 02 ! AMTIE
03417 PEGCRTK 03 ! Illegal 5:4 in GCR
03418 ! Dead track in PE
03419
03420 END WORD_11
03421
03422 ! Sense byte 28 (read channel TIE bus register; location M8953)
03423
03424 WORD_11 COMMON
03425 RTIER
03426 TIE_BUS_0 0 ! Reads TIE bus without enabling
03427 ! any M8950 modules. If JAM TIE
03428 ! bus (in address 011-W bit 7)
03429 ! is set then the value written into
03430 ! address 012-W is read.
03431 TIE_BUS_1 1 ! ''
03432 TIE_BUS_2 2 ! ''
03433 TIE_BUS_3 3 ! ''
03434
03435 END WORD_11
03436
03437 ! Sense byte 29 (AMTIE word; location M8955 TUP 2, 4)
03438
03439 WORD_11 COMMON
03440 TAMT
03441 TU_AMTIE 7-0 ! This register reflects info on
03442 ! TU bus AMTIE 7:0 L
03443
03444 END WORD_11
03445
03446
03447 ! Sense byte 30 (TU port status byte M8955)
03448
03449 WORD_11 COMMON
03450 PSTAT
03451 AMTIE_P 00 ! TU bus AMTIE Parity
03452 RDP 01 ! TU bus RD P line
03453 WCSP 02 ! TU bus WCS P line
03454 TACK 03 ! TU bus tachometer line
03455 TUPRES 04 ! Tape unit present. Indicates that
03456 ! a TU78 transport is physically
03457 ! cabled to this TU port.
03458 CMDPE 05 ! WCS command parity error during
03459 ! a TM78 command or command/status
03460 ! address write.
03461 WR_DATA_STROBE 06 ! TU bus WDS
03462 STAT_PE 07 ! WCS status parity error has occurred
03463 ! when reading a TU78 register
03464 ! over the WCS lines.
03465 END WORD_11
03466
03467
03468 ! Sense byte 31 (port read data word)
03469
03470 WORD_11 COMMON
03471 PRDD
03472 READ_DATA 7-0 ! This reg. reflects the info
03473 ! on TU BUS RD 7:0 L
03474 END WORD_11
03475
03476 ! Sense byte 32 (CAS port (n) status byte)
03477
03478 WORD_11 COMMON
03479 CASSTA
03480 DRADR 2-0 ! Massbus drive address for
03481 ! this port
03482 ATA 03 ! Attention active. The host computer
03483 ! has not completed the ATTN.
03484 ! interrupt servicing routine yet
03485 ILR_CAS 04 ! Illegal Massbus register referenced
03486 CASPE 05 ! CAS/Massbus C bus parity error has
03487 ! been detected on a write to TM78.
03488 TMRDY 06 ! This massbus port is ready to
03489 ! accept a command from the host
03490 ! computer.
03491 CONTEN 07 ! CAS contention error. Both the
03492 ! host computer and
03493 ! the microcomputer (M8960) tried
03494 ! to access the common address space
03495 ! at the same time.
03496
03497 END WORD_11
03498
03499 ! Sense byte 33 (Massbus C bus status byte)
03500
03501 WORD_11 COMMON
03502 CBUSSTA
03503 ONLINE 00 ! Massbus port is on-line
03504 V5OK 01 ! When true indicates that
03505 ! the -5 volts power supply for
03506 ! Massbus receivers is operating.
03507 LEFT 02 ! reflects the status of the
03508 ! write microcontroller LEFT line
03509 MBFAIL 03 ! Massbus fail. When HI indicates
03510 ! a controller Power failure or
03511 ! no Massbus connected to this port.
03512 MBINIT 04 ! Massbus initialize line status
03513 MBDEM 05 ! Massbus demand line status
03514 MBTRA 06 ! Massbus transfer line status
03515 MBATTN 07 ! Massbus attention line status
03516
03517 END WORD_11
03518
03519 ! Sense byte 34 (Massbus D bus status byte)
03520
03521 WORD_11 COMMON
03522 DBUSSTA
03523 MBSCLK 00 ! Massbus sync clock line status
03524 WMCSCLK 01 ! WMC SCLK or hardware reg 300-w bit 0
03525 MBRUN 02 ! Massbus run line
03526 MBEXC 03 ! Massbus exception line status
03527 MBEBL 04 ! Massbus end of block line status
03528 MBOCC 05 ! Massbus occupied line status
03529 MBWCLK 06 ! Massbus write clock line status
03530 MBWREN 07 ! Port write enabled
03531
03532 END WORD_11
03533
03534 ! Sense byte 35 (write microcontroller status; location M8959)
03535
03536 WORD_11 COMMON
03537 WMCSTA
03538 XMC_WCLK 00 ! Reflects true state of translator
03539 ! write clock pulse(110 ns at normal
03540 ! speed)
03541 RES_WMC_DRBUS 01 ! Residual To WMC DR Bus.
03542 ! Gates HI or LO nibble of residual
03543 ! character to WMC DR BUS.
03544 ACRC_WMC_DRBUS 02 ! ACRC to WMC DR BUS.
03545 ! Gates HI or LO nibble of ACRC
03546 ! character to WMC DR Bus.
03547 CRC_WMC_DRBUS 03 ! Gates HI or LO nibble of CRC
03548 ! character to WMC DR Bus.
03549 ECC_WMC_DRBUS 04 ! Gates HI or LO nibble of ECC
03550 ! character to WMC DR Bus.
03551 TRANS 05 ! Transfer. Shifts one nibble
03552 ! on WMC DR bus into Translator.
03553 WMC_NOT_DONE 06 ! 0 = Write microcontroller done
03554 ! writing PE data or GCR data
03555 ! groups.(used in diagnostic single
03556 ! step node; normally appears for
03557 ! 110 ns.)
03558 ! 1 = Write microcontroller busy
03559 ! or idle.
03560 XMC_NOT_DONE 07 ! 0 = Translator microcontroller
03561 ! done writing postamble and
03562 ! waiting to be serviced.
03563 ! 1 = Translator Busy.
03564 END WORD_11
03565
03566
03567 ! Sense byte 36 (Tape unit port 0/1 select; location M8955, Port 0/1, Slot 08)
03568
03569 WORD_11
03570 TUSEL0
03571 TUNIT_SEL 1 - 0 ! A two bit binary field which
03572 ! reflects the Tape Unit Port
03573 ! currently selected by the MBSEL
03574 ! register (340-w bits 1:0)
03575 TPORT1_WR_EN 2 ! When true indicates that the
03576 ! Write Path for Tape Unit Port
03577 ! 1 is enabled.
03578 TPORT0_WR_EN 3 ! When true indicates that the
03579 ! Write Path for Tape Unit Port
03580 ! 0 is enabled.
03581 TPORT1_RD_EN 4 ! When true indicates that the
03582 ! Read Path for Tape Unit Port 1
03583 ! is enabled.
03584 TPORT0_RD_EN 5 ! When true indicates that the
03585 ! REad Path for Tape Unit Port 0
03586 ! is enabled.
03587 NOT_BYTE_TER_CNT 6 ! 0 = Write microcontroller Byte
03588 ! Count Terminal Count asserted.
03589 SINGLE_TPORT 7 ! 0 = Both TUP modules are installed
03590 ! in backplane slots 08/09
03591 ! 1 = Only one TUP module installed
03592 ! in backplane slot 08.
03593 END WORD_11
03594
03595
03596 ! Sense byte 37 (Tape unit port 2/3 select; location M8955, Port 2/3 Slot 09)
03597
03598 WORD_11 COMMON
03599 TUSEL1
03600 TUNIT_SEL1 1 - 0 ! A two bit binary field which
03601 ! reflects the Tape Unit Port
03602 ! currently selected by the MBSEL
03603 ! register (340-w bits 1:0)
03604 TPORT3_WR_EN 2 ! When true indicates that the
03605 ! Write Path for Tape Unit Port
03606 ! 3 is enabled.
03607 TPORT2_WR_EN 3 ! When true indicates that the
03608 ! Write Path for Tape Unit Port
03609 ! 2 is enabled.
03610 TPORT3_RD_EN 4 ! When true indicates that the
03611 ! Read Path for Tape Unit Port 3
03612 ! is enabled.
03613 TPORT2_RD_EN 5 ! When true indicates that the
03614 ! REad Path for Tape Unit Port 2
03615 ! is enabled.
03616 ! Bits 7:6 are not used.
03617 END WORD_11
03618
03619
03620 ! Sense byte 38 (write data; location M8959)
03621
03622 WORD_11 COMMON
03623 WRTDAT
03624 WR_DATA 7-0 ! Looks at write or read data on
03625 ! the intermediate DRD bus.
03626 END WORD_11
03627
03628
03629 ! Sense byte 39 (Byte counter HI/LO; location M8959)
03630
03631 WORD_11 COMMON
03632 BYT1_CNT
03633 BYTE_CNT 7 - 0 ! Write micro/byte assembly
03634 ! 'byte counter' word.
03635
03636 END WORD_11
03637
03638
03639 ! Sense byte 40 (byte counter 15:8)
03640
03641 WORD_11 COMMON
03642 BYT2_CNT
03643 BYTE_CNT2 7 - 0 ! Byte count bits 15 to 8
03644 END WORD_11
03645
03646
03647 ! Sense byte 41 (Pad counter HI/Lo; location M8959)
03648
03649 WORD_11 COMMON
03650 PAD1_CNT
03651 PAD_CNT 7 - 0 ! Write Micro/Byte assembly
03652 ! 'pad character counter' word.
03653 END WORD_11
03654
03655 ! Sense byte 42 (pad counter 15:8)
03656
03657 WORD_11 COMMON
03658 PAD2_CNT
03659 PAD_CNT 7 - 0 ! Write Micro/Byte assembly
03660
03661 END WORD_11
03662
03663 ! Sense byte 43 (Error code counter HI/Lo; location M8959)
03664
03665 WORD_11 COMMON
03666 ERR1_CNT
03667 ERR_CODE 7-0 ! ECODE counter values when read
03668 ! at the completion of an operation:
03669 ! EC Error Indication
03670 ! -1 Read Skip Count > 4 in
03671 ! 10 CORE DUMP, > 3 in
03672 ! 10 COMPAT, or > 8 in
03673 ! HI Density
03674 ! -2 Read Skip Count > 1 in
03675 ! 11 Normal or 15
03676 ! Normal
03677 ! -3 Format COde > 6
03678 ! -4 WMC SELF-TEST
03679 ! Diagnostic error
03680 ! -5 Read overrun or write fault
03681 END WORD_11
03682
03683 ! Sense byte 44 (error code counter 15:8)
03684 WORD_11 COMMON
03685 ERR2_CNT
03686 ECODE_2 7 - 0 ! Error code counter 15:8
03687 END WORD_11
03688
03689
03690 ! Sense byte 45 (Diagnostic data reg A)
03691
03692 WORD_11 COMMON
03693 DDR_A
03694 MASSBUS_DATA 7 - 0 ! This reg. reads from and writes
03695 ! to a portion of the 18 bit wide MBD
03696 ! bus between the M8956 and M8959
03697 ! modules.
03698 END WORD_11
03699
03700 ! Sense byte 46 (diagnostic data reg B)
03701
03702 WORD_11 COMMON
03703 DDR_B
03704 MASSBUS_DATA_B 7 - 0 ! This reg. reads from and writes
03705 ! to a portion of the 18 bit wide
03706 ! MBD bus between the M8956 and
03707 ! M8959 modules.
03708 END WORD_11
03709
03710
03711 ! Sense byte 47 (Write Microcontroller error byte)
03712
03713 WORD_11 COMMON
03714 WMCERR
03715 MBD 2-0 ! HI order 3 bits of MBD lines
03716 DRRDPE 03 ! Read data parity error from M8952
03717 ! to WMC modules over the CRC bus.
03718 ROMPE 04 ! WMC ROM parity error was detected
03719 ! or the WMC internal microdiagnostics
03720 ! stopped at an error halt.
03721 ERR 05 ! WMC diagnostic ''ovarall error''
03722 ! status bit.
03723 DRMBPE 06 ! Massbus data bus parity error
03724 ! was received at TM78 data input
03725 ! port.
03726 DR_NO_WR_CLK 07 ! Host Massbus controller failed
03727 ! to respond to SCLK in time to
03728 ! transfer next data byte. (currently
03729 ! not used)
03730
03731 END WORD_11
03732
03733 ! Sense byte 48 (Interrupt status byte, M8960)
03734
03735 WORD_11 COMMON
03736 INTSTA
03737 X_ROMPE 00 ! Translator (M8958) ROM parity error
03738 ! or has branched to an error halt
03739 ! during its internal diagnostic
03740 ! routines.
03741 PE_WR_PE 01 ! Translator VPE on PE write has
03742 ! been detected at the output of
03743 ! the Translator.
03744 MB_B_OUT 02 ! Massbus port B logic not present
03745 MB_A_OUT 03 ! Massbus port A logic not present
03746 WR_DATA_REG_P 04 ! Reflects the state of the
03747 ! ''DR BYTE PAR H'' line. Serves
03748 ! as the parity bit for the WRTDAT
03749 ! reg. or PE write done flag.
03750 PWR_OK 05 ! When set indicates that the TM78
03751 ! Power Supply has not signaled
03752 ! an AC LO condition.
03753 ROM_PE 06 ! Microcomputer(M8960) ROM has
03754 ! experienced a Parity Error.
03755 MBSEL 07 ! Massbus port currently selected
03756 ! 0 = Port A, 1 = Port B
03757
03758 END WORD_11
03759
03760
03761 ! Sense byte 49 (TU78 status byte)
03762
03763 WORD_11 COMMON
03764 TUSTAT
03765 FPT_TU 00 ! File protected
03766 EOT_TU 01 ! End of tape
03767 BOT_TU 02 ! Beginning of tape
03768 PES 03 ! 1 = PE mode, 0 = GCR mode
03769 REW_TU 04 ! TU is rewinding
03770 ONL 05 ! TU is on-line, but not necessarily
03771 ! ready
03772 RDY_ON 06 ! Ready has undergone a transition
03773 ! to the set state. Cleared by a CLR
03774 ! TU command.
03775 REDY 07 ! The tape unit is ON LINE, not
03776 ! rewinding, not loading or unloading
03777 ! and all pneumatic interlocks are made.
03778
03779 END WORD_11
03780
03781 ! Sense byte 50 (MIA status A byte)
03782
03783 WORD_11 COMMON
03784 MIAA_STAT
03785 DSE_MIA 00 ! indicates that a Data security erase
03786 ! command has been written into the TU
03787 ! CMD B location. Clears when EOT sets
03788 ! or when a CLR TU command is written
03789 ! into TU CMD B.
03790 MOT 01 ! Indicates TU capstan motion
03791 LWR 02 ! Loop write-to-read test command
03792 WR_INH 03 ! Write head inhibit
03793 WRT 04 ! Indicates the state of the
03794 ! Write command bit
03795 REVERSE 05 ! indicates the state of the
03796 ! TU reverse command bit
03797 FWD 06 ! TU forward bit has been written
03798 ! with a 1 or a DSE command has
03799 ! been written into the TU CMD B
03800 ! location.
03801 MAN_TEST 07 ! MIA is in manual test mode
03802
03803 END WORD_11
03804
03805 ! Sense byte 51 (MIA status B byte)
03806
03807 WORD_11 COMMON
03808 MIAB_STAT
03809 PORTSEL_MIA 2-0 ! Port select
03810 ! 6 = position 0 (massbus A)
03811 ! 5 = position 1 (massbus B)
03812 ! 3 = position 2 or both(Massbus A or B)
03813 ! 7 = position 3(select neither Massbus)
03814 SPEED 4-3 ! A two bit field that indicates
03815 ! the speed of a tape unit. TU78 = 2
03816 ! (125 IPS)
03817 ! Bit 3 contains 0 always
03818 ! Bit 4 contains 1 always
03819 ARA_ERR 5 ! Automatic read amplification
03820 ! burst error. During a GCR operation
03821 ! from 9.5 inches after BOT the
03822 ! amplifier gains failed to achieve
03823 ! the required value. Valid only if
03824 ! READY is set.
03825 PEC 6 ! 0 = GCR mode
03826 ! 1 = PE mode
03827 CMD_PE 7 ! TU bus command parity error or
03828 ! a TEST command has been written
03829 ! into TU CMD B. Clears when a CLR
03830 ! TU command is received, whether
03831 ! parity is correct(odd) or not.
03832 ! This bit drives the TU Bus CMD PE L
03833 ! line.
03834 END WORD_11
03835
03836 ! Sense byte 52 (MIA register 3; serial NR A)
03837
03838 WORD_11 COMMON
03839 SERA_NR
03840 SER_ANR 7-0 ! SERIAL NUMBER
03841 END WORD_11
03842
03843
03844 ! Sense byte 53 (MIA register 4; serial NR B)
03845
03846 WORD_11 COMMON
03847 SERB_NR
03848 SER_BNR 7-0 ! SERIAL NUMBER
03849 END WORD_11
03850
03851
03852
03853 ! Sense byte 54 (MIA TU diagnostics byte, M8955)
03854
03855 WORD_11 COMMON
03856 TUDIAG
03857 AMTIE_THR 1-0 ! AMTIE threshold
03858 ! 0/1 = 10% IBG check
03859 ! 2 = 25% Write
03860 ! 3 = 20% Read
03861 ! Bit 02 is zero
03862 HI_RD_TH 02 ! Indicates the state of the HIGH
03863 ! READ THRESHOLD bit in the THRESHOLD
03864 ! command location.
03865 TACH 03 ! Tachometer pulse
03866 EOT_DET 04 ! EOT detected
03867 RD_EN 05 ! Read enable
03868 NOT_WR 06 ! Not writing
03869 WRB4 07 ! State of write AMP for TK4
03870
03871 END WORD_11
03872
03873 ! Sense byte 55
03874
03875 WORD_11 COMMON
03876 RET1_CNT
03877 RET_CNT 7 - 0 ! Retry counter. This byte is the
03878 ! count of retry interrupt requests
03879 ! given for the tape unit. When this
03880 ! count is zero, the tape unit is not
03881 ! in a retry sequence.
03882 END WORD_11
03883
03884 ! Sense byte 56 (Retry control byte)
03885 ! This byte is used by the microcode to control error recovery. It is
03886 ! meaningful only when the retry counter(byte 55) is not zero.
03887
03888 WORD_11 COMMON
03889 RET2_CNT
03890 REV_CMD 05 ! Initial command moved tape
03891 ! reverse
03892 ! Bits 0 to 4 are not used
03893 RD 06 ! Initial command was a Read
03894 OPP 07 ! Last retry was in the opposite
03895 ! direction of initial command
03896 END WORD_11
03897
03898 ! Sense byte 57 (TU software status)
03899
03900 WORD_11 COMMON
03901 TUX
03902 DSE_TUX 00 ! Data security erase in progres
03903 REW 01 ! Rewind in progress
03904 PRES_TUX 02 ! TU exists and power is on
03905 NDT 03 ! NON_DATA transfer command
03906 ! issued from a massbus port
03907 ! is in progress
03908 REV 04 ! Tape was not moved in reverse
03909 WRT_TAPE 05 ! Last tape operation involved
03910 ! a write to tape
03911 TM 06 ! Last record seen was a tape
03912 ! mark
03913 PORT 07 ! 0 = Last massbus command came
03914 ! from port A
03915 ! 1 = Last massbus command
03916 ! came from port B
03917 END WORD_11
03918
03919 ! Sense byte 58 (Transfer control byte)
03920
03921 WORD_11 COMMON
03922 XFRCTL
03923 WRC_SEL 2-0 ! Write clock select
03924 ! 0 = Normal write clock
03925 ! 1 = 20% clock
03926 ! 2 = 10% clock (GCR read)
03927 ! 3 = -20% clock (PE read)
03928 ! 4 = External clock
03929 ! 5 = Single step
03930 ! 6/7 = not used
03931 RDC_SEL 5-3 ! Read clock select
03932 ! 0 = -10% clock
03933 ! 1 = +10% clock
03934 ! 2 = Normal clock
03935 ! 3 = -30% clock
03936 ! 4 = external clock
03937 ! 5 = Single clock
03938 ! 6/7 = not used
03939 PLO_BP 06 ! Read channel Phase Lock
03940 ! Oscillator Bypass
03941 ! Bit 7 is zero
03942 LO_RD_TH 07 ! Low read threshold.
03943 END WORD_11
03944
03945
03946 ! Sense byte 59(XRETRY Byte)
03947 WORD_11 COMMON
03948 XRETRY
03949 X_RETRY 7 - 0 ! REtry suppress and format control.
03950 ! This byte contains the contents
03951 ! of the left half of the Massbus reg.
03952 ! which contains the retry suppress bit
03953 ! format and skip count.
03954 END WORD_11
03955
03956 ! Sense byte 60(Keypad enable flag byte)
03957
03958 WORD_11 COMMON
03959 ENAON
03960 KEYPAD_FLAG 7 - 0 ! This byte is not zero when the
03961 ! keypad is enabled.
03962 END WORD_11
03963
03964 !++
03965 ! Disk statistics block
03966 !--
03967
03968 TABLE TOPS10
03969 DSCSBP !Disk statistics block
03970 DSCBPT 0 0-35 !TABLE LENGTH
03971 !-# OF ITEMS,,0
03972 DEV_NAM 1 0-35 !DEVICE NAME IN SIXBIT
03973 DSCHID 2 0-35 !HOME BLOCK ID IN SIXBIT
03974 DSCHCT 3 0-35 !LH = # OF HARD DEV+SEEK+SRH ERRORS
03975 !RH = # OF HARD DATA ERRORS
03976 DSCSCT 4 0-35 !LH = # OF HARD+SOFT DEV+SEEK+SRH ERRORS
03977 !RH = # OF HARD+SOFT DATA ERRORS
03978 DSCPCT 5 0-35 !LH = # OF POSITION FAILURES
03979 !RH = # OF HARD+SOFT SEEK INC'S
03980 SEEK_INC_CNT 5 18-35 !
03981 NTHUNG_CNT 6 0-8 ! NTHUNG count {
03982 THUNG_CNT 6 9-17 ! THUNG count { UNIHNG
03983 PHUNG_CNT 6 18-26 ! PHUNG count {
03984 SHUNG_CNT 6 27-35 ! SHUNG count {
03985 DSCMCT 7 0-35 !SOFTWARE ERROR COUNT
03986 SAT_ERRORS 7 0-11 ! SAT error count {
03987 RIB_ERRORS 7 12-23 ! RIB error count { UNIMCT
03988 CHKSM_ERRORS 7 24-35 ! Checksum error count {
03989 DSCBRC 8 0-35 !TOTAL BLOCKS READ IN BUFFERED MODE
03990 DSCBWC 9 0-35 !TOTAL BLOCKS WRITTEN IN BUFFERED MODE
03991 DSCDRC 10 0-35 !TOTAL BLOCKS READ IN DUMP MODE
03992 DSCDWC 11 0-35 !TOTAL BLOCKS WRITTEN IN DUMP MODE
03993 DSCMRC 12 0-35 !TOTAL BLOCKS READ BY MONITOR
03994 DSCMWC 13 0-35 !TOTAL BLOCKS WRITTEN BY MONITOR
03995 DSCICT 14 0-35 !TOTAL BLOCKS READ FOR SWAPPER
03996 DSCOCT 15 0-35 !TOTAL BLOCKS WRITTEN BY SWAPPER
03997 DSCMSC 16 0-35 !TOTAL SEEKS BY MONITOR
03998 DSCUSC 17 0-35 !TOTAL SEEKS FOR JOBS
03999 END TABLE
04000
04001 !++
04002 ! DTE control block
04003 !--
04004
04005 TABLE TOPS10 TOPS20
04006 DTE_CONTROL_BLOCK !List of DTE control blocks
04007 DTE_BLOCK,_0 0 BODY-F
04008 DTE_BLOCK,_1 8 BODY-F
04009 DTE_BLOCK,_2 16 BODY-F
04010 DTE_BLOCK,_3 24 BODY-F
04011 END TABLE
04012
04013 TABLE TOPS10 TOPS20
04014 DTE_BLOCK ! Each DTE duplicates the following format
04015 TO_11_POINTER 0 0-35
04016 TO_10_POINTER 1 0-35
04017 DTE_INT_INSTRUCTION 2 0-35
04018 ! RESERVED 3 0-35
04019 EXAMINE_PROTECT 4 0-35
04020 DEPOSIT_PROTECT 5 0-35
04021 DEPOSIT_RELOC 6 0-35
04022 END TABLE
04023
04024 !++
04025 !
04026 ! MASSBUS REGISTER INFORMATION FOR DX20.
04027 ! MASSBUS REGISTER VALUES ARE IN THE FORM
04028 ! FINAL CONTENTS,,INITIAL CONTENTS
04029 !
04030 !--
04031
04032 TABLE TOPS10 TOPS20
04033 DX20_MASSBUS_REG
04034 DM_CR 0 0-35 ! 00 Control register
04035 DM_CR_ERR 0 18-35
04036 DM_SR 1 0-35 ! 01 Status register
04037 DM_SR_ERR 1 18-35
04038 DM_ER 2 0-35 ! 02 Error register
04039 DM_ER_ERR 2 18-35
04040 DM_MR 3 0-35 ! 03 Maintainence register
04041 DM_MR_ERR 3 18-35
04042 DM_AS 4 0-35 ! 04 Attention summary register
04043 DM_AS_ERR 4 18-35
04044 DM_SB 5 0-35 ! 05 Secondary block addr reg - disk
04045 DM_SB_ERR 5 18-35
04046 DM_BC 5 0-35 ! Byte count register - tape
04047 DM_BC_ERR 5 18-35
04048 DM_DT 6 0-35 ! 06 Drive type & Hardware version #
04049 DM_DT_ERR 6 18-35
04050 DM_SI 7 0-35 ! 20 STATUS INDEX / ENDING STATUS
04051 DM_SI_ERR 7 18-35
04052 DM_AA 8 0-35 ! 21 Async address register - disk
04053 DM_AA_ERR 8 18-35
04054 DM_DN 8 0-35 ! DRIVE # / MODE - tape
04055 DM_DN_ERR 8 18-35
04056 DM_FL 9 0-35 ! 22 Flags / argument register - disk
04057 DM_FL_ERR 9 18-35
04058 DM_ES 9 0-35 ! EXTENDED STATUS TABLE SIZE - tape
04059 DM_ES_ERR 9 18-35
04060 DM_DD 10 0-35 ! 23 Drive number register - disk
04061 DM_DD_ERR 10 18-35
04062 DM_TE 10 0-35 ! Track in error / Flags - tape
04063 DM_TE_ERR 10 18-35
04064 DM_CY 11 0-35 ! 24 Cylinder register - disk
04065 DM_CY_ERR 11 18-35
04066 DM_AY 11 0-35 ! ASYNCH. STATUS - tape
04067 DM_AY_ERR 11 18-35
04068 DM_E0 12 0-35 ! 26 EXTENDED STATUS REG 0
04069 DM_E0_ERR 12 18-35
04070 DM_E1 13 0-35 ! 27 EXTENDED STATUS REG 1
04071 DM_E1_ERR 13 18-35
04072 ! Diagnostic Registers
04073 DM_IR 14 0-35 ! 30 Daig reg 0 - INSTR. REG
04074 DM_IR_ERR 14 18-35
04075 DM_PC 15 0-35 ! 31 Diag reg 1 - PROGRAM COUNTER
04076 DM_PC_ERR 15 18-35
04077 DM_AL 16 0-35 ! 32 Diag reg 2 - ALU
04078 DM_AL_ERR 16 18-35
04079 DM_SD 17 0-35 ! 33 Diag reg 3 - SROM / DROM
04080 DM_SD_ERR 17 18-35
04081 DM_FP 18 0-35 ! 34 Diag reg 4 - FROM/PARITY/INTERRUPT
04082 DM_FP_ERR 18 18-35
04083 DM_BW 19 0-35 ! 35 Diag reg 5 - BALU / WORKING MEMORY
04084 DM_BW_ERR 19 18-35
04085 DM_IB 20 0-35 ! 36 Diag reg 6 - INPUT MUX /BUFFER Reg
04086 DM_IB_ERR 20 18-35
04087 DM_MA 21 0-35 ! 37 Diag reg 7 - FLAGS / MEMORY ADDR.
04088 DM_MA_ERR 21 18-35
04089 END TABLE
04090
04091
04092 !++
04093 !
04094 ! The bit definitions of some of the above registers follows:
04095 !
04096 !--
04097
04098 WORD_10 COMMON
04099 DM_SR ! BITS 0-11 NOT DEFINED.
04100 ATT_ACT 20 ! Attention Active. The ATA flip flop
04101 ! drives the massbus attention (ATTN)
04102 ! line. It is normally set by the
04103 ! microprocessor to request service
04104 ! from the controller. The reason for
04105 ! the request is either to indicate
04106 ! completion of an operation or to
04107 ! report an error condition. The
04108 ! hardware will also cause ATA to set
04109 ! on the trailing edge of the EBL pulse
04110 ! if the microprocessor has stopped, or
04111 ! if the microprocessor stops and
04112 ! occupied (OCC) has not yet been set,
04113 ! or if GO is not set and either an
04114 ! illegal register (ILR) is accessed
04115 ! by the controller or a control bus
04116 ! parity error occurred(CBPARE). The
04117 ! ATA flip flop can be cleared by the
04118 ! microprocessor, by DX RESET, or by
04119 ! the host writing the attention summary
04120 ! register with control bus data line
04121 ! asserted corresponding to this
04122 ! interface's device selection number.
04123 ! For example, to clear unit 3's ATA
04124 ! bit, write the attention summary
04125 ! register with data bit 03 asserted
04126 ! on the control bus.
04127 COMP_ERR 21 ! Composite error. This signal is
04128 ! a level produced by the inclusive
04129 ! -OR of the eight least significant
04130 ! bits of the error register(DM_ER).
04131 ! The only way to clear the level is
04132 ! to clear all the error conditions.
04133 ! Composite error is actually the
04134 ! OR of CLASS A ERR and CLASS B ERR.
04135 ! CLASS A ERR is the OR of DB PAR ERR,
04136 ! CB PAR ERR, MP ERR, RMR, and ILR.
04137 ! CLASS B ERR is the OR of UB PAR ERR
04138 ! MP STOPPED and ILF.
04139 LINK_PRES 22 ! Microprocessor link present. This
04140 ! is a level available to the master
04141 ! host system and when detected by the
04142 ! host indicates full control of the
04143 ! microprocessor. The host that detects
04144 ! LNKPRS can load the microcode into the
04145 ! microstore, start and stop the
04146 ! microprocessor and access the
04147 ! diagnostic registers.
04148 MP_RUN 23 ! Microprocessor running. This is a
04149 ! level indicating the state of the
04150 ! UBUS RUNNING line. It is asserted
04151 ! whenever a microprocessor timing
04152 ! cycle is in progress, including
04153 ! single cycle operation.
04154 END WORD_10
04155
04156
04157 !++
04158 !
04159 ! The error register can be broken down into two 8-bit bytes. The high order
04160 ! 8 bits (8-15) consists of a software defined error code used by the
04161 ! microprocessor to pass error info to the host system. The low-order 8 bits
04162 ! (0-7) consists of six hardware error flags and two software error flags.
04163 ! The low-order 8 bits must be clear to negate CERR. The low-order 8 bits of the
04164 ! error register are cleared in normal operation by the host system writing
04165 ! them to a zero. Additionally, the host can write these bits to a one for
04166 ! purposes of diagnostic checkout.
04167 !
04168 !--
04169 WORD_10 COMMON
04170 DM_ER
04171 DX_ILL_FUNCT 35 ! This flip flop will be set by the
04172 ! microprocessor if the microcode
04173 ! decides it has been given an illegal
04174 ! function to perform. This can be the
04175 ! result of an invalid function code,
04176 ! or other parameters such as an
04177 ! incorrect data mode. The flip-flop
04178 ! can be written to zero by the
04179 ! microprocessor and is cleared by
04180 ! DX RESET.
04181 DX_ILL_REG 34 ! This flip-flop will be set if the
04182 ! host tries to read or write a
04183 ! non-existent register, namely,
04184 ! 07-17. It is cleared by DX RESET.
04185 DX_REG_MOD 33 ! RMR. This flip-flop will set
04186 ! if the host tries to write any
04187 ! Massbus interface register while the
04188 ! GO bit is set except for the following
04189 ! registers: the maintenance reg.,
04190 ! attention summary reg., or diagnostic
04191 ! registers 0 - 7. This bit will also
04192 ! set if the host tries to write
04193 ! read-only or non-existent registers
04194 ! and GO is set. This flip-flop is
04195 ! cleared by DX RESET.
04196 DX_CBUF_PE 32 ! Control Bus Parity Error. This
04197 ! flip-flop will set during control
04198 ! bus write sequences if the Massbus
04199 ! interface detects even parity from
04200 ! from the massbus control bus. It is
04201 ! cleared by DX RESET.
04202 DX_DBUF_PE 31 ! Data bus parity error. This
04203 ! flip-flop will set during synchronous
04204 ! data transfers whenever even parity
04205 ! is detected from either the Massbus
04206 ! data bus or the master bus. It is
04207 ! cleared by UBUS INITIALIZE.
04208 DX_UBUS_PE 30 ! Micro bus parity error. This
04209 ! flip-flop will set when even parity
04210 ! is detected by the Massbus interface
04211 ! on microbus writes (DATO) to the
04212 ! registers in the Massbus interface.
04213 ! This bit will in turn cause the
04214 ! microprocessor start (MP START) line
04215 ! to turn off, forcing the microprocessr
04216 ! to stop in order to preserve the
04217 ! current state of the DX20 for analysis
04218 ! by the host. The MP START line to the
04219 ! microprocessor is the AND of the MP
04220 ! START flip-flop in the maintenance
04221 ! register being set and UB PAR ERR
04222 ! being cleared. The UB PAR ERR flip-
04223 ! flop is cleared by DX RESET.
04224 DX_MP_STOP 29 ! Microprocessor stopped. This flip-flop
04225 ! will be set if microprocessor start
04226 ! is set and UBUS RUNNING transitions to
04227 ! the OFF state. This will occur
04228 ! whenever the microprocessor hardware
04229 ! detects certain error conditions, e.g.
04230 ! internal parity errors. The flip-flop
04231 ! is cleared by DX RESET.
04232 DX_MP_ERROR 28 ! Microprocessor error. This flip-flop
04233 ! is normally set by the microprocessor
04234 ! to indicate to the host that a valid
04235 ! error code is contained in bits 8-15
04236 ! of the error code register. It can
04237 ! be cleared by the microprocessor
04238 ! writing it to zero and is cleared by
04239 ! DX RESET.
04240 DX_ERR_CLASS 24-27 ! This error code register is
04241 ! only writable by the microprocessor
04242 DX_SUB_CLASS 20-23 ! and will contain either an error code
04243 ! or ending status information for use
04244 ! with either the operational microcode
04245 ! or diagnostics. The register is
04246 ! cleared by UBUS INITIALIZE. This
04247 ! initialize is generated by either
04248 ! DX RESET or by the microprocessor
04249 ! setting the initialize bit in its
04250 ! internal status register (bit 7 in
04251 ! reg 37). The different error codes
04252 ! and status codes are:
04253 ! CLASS SUBCLASS description
04254 ! 1 Unusual device status
04255 ! or condition. It is
04256 ! set if the device
04257 ! returns a status byte
04258 ! with bits other than
04259 ! device end or channel
04260 ! end set or if an
04261 ! unusual condition
04262 ! exists. Either the
04263 ! ending status registr
04264 ! should be examined or
04265 ! the extended status
04266 ! table interrogated
04267 ! for more detail.
04268 ! 0 Status is from the
04269 ! final sequence.
04270 ! 1 Status is from the
04271 ! initial selection
04272 ! sequence.
04273 ! 2 Short record- this
04274 ! code is not necesarly
04275 ! an error. It is set
04276 ! if on a read operatn
04277 ! if the actual record
04278 ! read was shorter than
04279 ! the length specified
04280 ! in the byte count.
04281 ! 3 Long record- This
04282 ! code is set on a read
04283 ! operation if the
04284 ! actual length of the
04285 ! record read was
04286 ! longer than specified
04287 ! in the byte count
04288 ! register.
04289 ! 4 Device selection
04290 ! error. This code
04291 ! indicates the
04292 ! addressed drive did
04293 ! not exist.
04294 ! 5 Recoverable error-
04295 ! This error is set
04296 ! if an error is
04297 ! detected by the
04298 ! DX20 after tape
04299 ! motion has started
04300 ! which is recoverable.
04301 ! 0 Data path parity err.
04302 ! 1 Ending status byte
04303 ! parity error.
04304 ! 6 Recoverable error-
04305 ! THis error is set if
04306 ! an error is detected
04307 ! by the DX20 before
04308 ! tape motion has
04309 ! started which is
04310 ! recoverable.
04311 ! 0 Address mismatch-
04312 ! This address is
04313 ! returned by the drive
04314 ! did not match the
04315 ! address requested.
04316 ! 1 Bus in parity error
04317 ! receiving the address
04318 ! from the drive.
04319 ! 2 Bus in parity error
04320 ! receiving the initial
04321 ! status byte.
04322 ! 3 Run was not received
04323 ! from RH20.
04324 ! 7 Non-recoverable err-
04325 ! This error is set if
04326 ! a parity error is
04327 ! detected which
04328 ! cannot be recovered
04329 ! from with some form
04330 ! of retry because
04331 ! the tape position is
04332 ! unknown.
04333 ! 0 Data path detected
04334 ! micro bus parity err.
04335 ! 1 Channel bus interface
04336 ! detected micro bus
04337 ! parity error.
04338 ! 2 Channel bus handshake
04339 ! timeout.
04340 ! 3 Device asserted
04341 ! disconnect in.
04342 END WORD_10
04343
04344 WORD_11 COMMON
04345 DM_MR
04346 DX20_RESET 1 !
04347 MP_START 2 !
04348 WRITE_EP 3 !
04349 SING_CYC 4 !
04350 END WORD_11
04351
04352 WORD_11 COMMON
04353 DM_AS
04354 AT0 0 !
04355 AT1 1 !
04356 AT2 2 !
04357 AT3 3 !
04358 AT4 4 !
04359 AT5 5 !
04360 AT6 6 !
04361 AT7 7 !
04362 END WORD_11
04363
04364 WORD_11 COMMON
04365 DM_HR ! RP20 Head/Record register
04366 RP20_HEAD 15-8 ! Head number
04367 RP20_RECORD 7-0 ! Record number
04368 END WORD_11
04369
04370 !++
04371 ! DX20 DEVICE SUB-BLOCK DEFINITIONS
04372 !
04373 !THESE BYTES ARE IN THE FORMAT:
04374 ! BYTE 0 = BITS 2-9
04375 ! 1 = 10-17
04376 ! 2 = 20-27
04377 ! 3 = 28-35
04378 !VALUES ARE SUPPLIED FROM DX20 WITH VER 100 OR LATER OF U-CODE AS
04379 !LONG AS DX20 IS STILL RUNNING. VALUES ARE THOSE DETECTED AT TIME
04380 !OF THE ERROR.
04381 !--
04382
04383 TABLE TOPS10 TOPS20
04384 DX20_DEVICE_REG
04385 DT_SBA 0 0-35 ! SENSE BYTES 0-3
04386 DT_SB_0 0 2-9
04387 DT_SB_1 0 10-17
04388 DT_SB_2 0 20-27
04389 DT_SB_3 0 28-35
04390 DT_SBB 1 0-35 ! 4-7
04391 DT_SB_4 1 2-9
04392 DT_SB_5 1 10-17
04393 DT_SB_6 1 20-27
04394 DT_SB_7 1 28-35
04395 RP20_FORMAT 1 28-31
04396 RP20_MSG_CODE 1 32-35
04397 DT_SBC 2 0-35 ! 8-11
04398 DT_SBD 3 0-35 ! 12-15
04399 DT_SBE 4 0-35 ! 16-19
04400 DT_SB_16 4 2-9
04401 DT_SB_17 4 10-17
04402 DT_SB_18 4 20-27
04403 RP20_CODED_ERR 4 24-27 ! Microprog detected err (Fmt 1, Msg 2)
04404 DT_SB_19 4 28-35
04405 DT_SBF 5 0-35 ! 20-23
04406 DT_SB_20 5 2-9
04407 DT_SB_21 5 10-17
04408 DT_SB_22 5 20-27
04409 DT_SB_23 5 28-35
04410 RP20_FSC 5 20-35 ! Fault Symptom Code (Formats 1 & 4)
04411 DT_MCV 6 0-35 ! MICRO CODE VERSION #
04412 DT_MRA 7 0-35 ! MASSBUS INTERFACE REG 0-3
04413 DT_MRB 8 0-35 ! 4-7
04414 DT_MRC 9 0-35 ! 10-13
04415 DT_MRD 10 0-35 ! 14-17
04416 DT_MRE 11 0-35 ! 20-23
04417 DT_MRF 12 0-35 ! 24-27
04418 DT_CB0 13 0-35 ! CHANNEL BUS INTERFACE 10-13
04419 DT_CB1 14 0-35 ! 14-17
04420 DT_DP0 15 0-35 ! DATA PATH REG 0-3
04421 DT_DP1 16 0-35 ! 4-7
04422 DT_DP2 17 0-35 ! 10-13
04423 DT_DP3 18 0-35 ! 14-17
04424 DT_LAS 19 0-35 ! LAST COMMAND,LAST ADDR,
04425 ! LAST ASYNCH,STATUS,
04426 ! LAST DEV W ASYNCH STATUS
04427 END TABLE
04428
04429 !++
04430 !
04431 ! The bit definitions of some of the above Sense Bytes follow:
04432 !
04433 ! Note that the bit #s in the definition are reversed from the
04434 ! documentation - Refer to the numbers in the comment.
04435 !--
04436
04437 WORD_11 COMMON
04438 DT_SB_0 ! RP20 Sense Byte 0
04439 CMD_REJECT 7 ! Bit 0
04440 INTERVENTION_REQ 6 ! 1
04441 BUS_OUT_PARITY 5 ! 2
04442 EQUIPMENT_CHECK 4 ! 3
04443 RP20_DATA_CHECK 3 ! 4
04444 RP20_OVERRUN 2 ! 5
04445 ! 6 - Not used
04446 ! 7 - Not used
04447 END WORD_11
04448
04449
04450 WORD_11 COMMON
04451 DT_SB_1 ! RP20 Sense Byte 1
04452 PERMANENT_ERR 7 ! Bit 0
04453 INVALID_TRACK_FMT 6 ! 1
04454 END_OF_CYLINDER 5 ! 2
04455 ! 3 - Not used
04456 NO_RECORD_FOUND 3 ! 4
04457 FILE_PROTECT 2 ! 5
04458 WRITE_INHIBIT 1 ! 6
04459 OPERATION_INCOMPLETE 0 ! 7
04460 END WORD_11
04461
04462
04463 WORD_11 COMMON
04464 DT_SB_2 ! RP20 Sense Byte 2
04465 SB_2_0 7 ! Bit 0 - Not used
04466 CORRECTABLE 6 ! 1
04467 ALTERNATE_CNTLR 5 ! 2
04468 ENVIRONMENTAL_DATA 4 ! 3
04469 COMPATIBILITY_MODE 3 ! 4
04470 ! 5 - Reserved
04471 ! 6 - Not used
04472 ! 7 - Not used
04473 END WORD_11
04474
04475 !++
04476 ! Information recorded by TOPS-10 or TOPS-20 when an
04477 ! operator wishes to note something in the log.
04478 ! This may or may not be a manually-detected error.
04479 !--
04480
04481 TABLE TOPS10 TOPS20
04482 ERROR_LOG
04483 JOB_NUMBER 0 0-17 !Who sent message
04484 TERMINAL_NUMBER 0 18-35 !Terminal of sender
04485 USER_ID 1 0-35 !P,PN OF USER
04486 WHO_ANSWER 2 0-35 !SIXBIT ANSWER TO /WHO
04487 DEV_ANSWER 3 0-35 !SIXBIT ANSWER TO /DEV
04488 LOG_TEXT 4 0-35 !PTR TO ASCIZ MSG
04489 END TABLE
04490
04491 !++
04492 ! Front-end entry description used by both TOPS-10 and TOPS-20.
04493 !--
04494
04495 TABLE TOPS10 TOPS20
04496 FE_DATA
04497 FORK_NUMBER 0 0-17 !Fork running at time of entry
04498 JOB_NUMBER 0 18-35 !Job " " " " "
04499 DIRECTORY 1 0-35 !LOGGED IN DIRECTORY,, CONNECTED DIR
04500 FE_VERSION 2 0-35 !FRONT END SOFTWARE VERSION #
04501 PROGRAM_NAME 3 0-35 !USER'S PGM NAME IN SIXBIT
04502 UNK_DEV_FLAG 4 0 !DEVICE CODE UNKNOWN TO TOPSxx
04503 DEV_NUMBER 4 14-17 !DEVICE #
04504 DEV_CODE 4 18-35 !DEVICE CODE OF REPORTED DEVICE
04505 ! SAME AS CODE IN FE PROTOCOL
04506 WD_CNT 5 0-17 !POINTER TO SUB-BLOCK
04507 FE_SUB 5 MAIN-F !To get into subtable
04508 FE_OFFSET 5 18-35 !DEVICE DEPENDENT PACKET OF INFORMATION
04509 !-# OF WORDS,,OFFSET FROM FE_JOB
04510 DETECTING_DTE 6 0-35 !DTE # WHICH DETECTED ERROR
04511 FE_LENGTH 7 0-35 !LENGTH OF DATA PACKET IN 8 BIT BYTES
04512 END TABLE
04513
04514 !++
04515 ! FE supplied data in 16 bit bytes
04516 !--
04517 TABLE TOPS10 TOPS20
04518 FE_SUB !Fixed portion of front-end supplied data
04519 STD_STATUS 0 0-15 !Standard status
04520 CONFIG_RPT_FLAG 0 4 ! 11 - Device configuration report
04521 LOST_INT_FLAG 0 5 ! 10 - Lost interrupt
04522 DEV_HUNG_FLAG 0 6 ! 9 - Device hung
04523 LOG_FLAG 0 9 ! 6 - Log this error
04524 LAST_PKT_FLAG 0 10 ! 5 - last packet of a record
04525
04526 ! Info for DLSCAN
04527
04528 DLSCAN_DEVICE 0 17-22 ! Real device from DLSCAN
04529 ! 60 -- DH11
04530 ! 70 -- DM11
04531 ! 75 -- DL11 (not CTY)
04532 ! 77 -- DL11 (CTY)
04533
04534 DM11_DEV_NUMBER 0 26-28 ! DM11 device
04535 DH11_DEV_NUMBER 0 24-27 ! DH11 device (plus 1)
04536 DH11_LINE_NUMBER 1 12-15 ! DH11 line number
04537
04538 ! DH11 error on DLSCAN
04539
04540 DH_VALID_DATA 1 16
04541 DH_DATA_OVERUN 1 17
04542 DH_FRAMING_ERR 1 18
04543 DH_PARITY_ERR 1 19
04544
04545
04546 ! KL reload status block for KLCPU (sub-type 200)
04547 KL_RLD_STATUS 0 16-31
04548
04549 ! Info for new KLERR entry (sub-type 205)
04550
04551 KLER_BLOCK 0 16-31 !Current block number
04552 KLER_BLOCK_CNT 1 0-15 !Total number of blocks in entry
04553 KLER_FIRST_WORD 1 16-31 !First data word
04554 END TABLE
04555
04556 !++
04557 ! HALT STATUS BLOCK
04558 !--
04559 TABLE TOPS10 TOPS20
04560 KS_HS_BLOCK !KS-10 HALT status block
04561 HS_MAG 0 0-35 !MAGNITUDE (ONES IN BITS 1-36)
04562 HS_PC 1 0-35 !PC
04563 HS_HR 2 0-35 !CURRENT INSTRUCTION (HR)
04564 HS_AR 3 0-35 !AR
04565 HS_ARX 4 0-35 !ARX
04566 HS_BR 5 0-35 !BASE REGISTER
04567 HS_BRX 6 0-35 !BASE REGISTER EXTENSTION
04568 HS_ONE 7 0-35 !CONSTANT ONE
04569 HS_EBR 10 0-35 !EXEC BASE REGISTER
04570 HS_UBR 11 0-35 !USER BASE REGISTER
04571 HS_MSK 12 0-35 !MASK (ONES IN BITS 0-35)
04572 HS_FLG 13 0-35 !MICROCODE STATUS FLAGS,,PAGE FAIL CODE
04573 HS_PI 14 0-35 !PI STATUS
04574 HS_X1 15 0-35 !1,,1
04575 HS_T0 16 0-35 !T0
04576 HS_T1 17 0-35 !T1
04577 HS_VMA 20 0-35 !VMA FLAGS,,VMA (0-15,,16-35)
04578 END TABLE
04579
04580 !++
04581 !
04582 ! MASSBUS REGISTER DEFINITIONS
04583 !
04584 !--
04585
04586 TABLE TOPS10 TOPS20
04587 MB_DEV ! MB_DEVICE_REG
04588 MB_CR_END 0 0-17 ! Control reg at end
04589 MB_CR_ERR 0 18-35 ! at error
04590 MB_DS_END 1 0-17 ! Status reg at end
04591 MB_DS_ERR 1 18-35 ! at error
04592 MB_ER1_END 2 0-17 ! Error reg 1 at end
04593 MB_ER1_ERR 2 18-35 ! at error
04594 MB_ERR_END 2 0-17 ! Error reg 1 at end
04595 MB_ERR_ERR 2 18-35 ! at error
04596 MB_MR_END 3 0-17 ! Maintenance reg at end
04597 MB_MR_ERR 3 18-35 ! at error
04598 MB_AS_END 4 0-17 ! Attention summary reg at end
04599 MB_AS_ERR 4 18-35 ! at error
04600 MB_DA_END 5 0-17 ! Desired track/sector addr reg at end
04601 MB_DA_ERR 5 18-35 ! at error
04602 MB_FR_CNT_END 5 0-17 ! Frame count reg at end
04603 MB_FR_CNT_ERR 5 18-35 ! at error
04604 MB_DT_END 6 0-17 ! Drive type reg at end
04605 MB_DT_ERR 6 18-35 ! at error
04606 MB_LA_END 7 0-17 ! Look ahead reg at end
04607 MB_LA_ERR 7 18-35 ! at error
04608 MB_CHK_SUM_END 7 0-17 ! Checksum reg at end
04609 MB_CHK_SUM_ERR 7 18-35 ! at error
04610 MB_SN_END 8 0-17 ! Serial number reg at end (BCD)
04611 MB_SN_ERR 8 18-35 ! at error (4 digits)
04612 MB_OF_END 9 0-17 ! Offset reg at end
04613 MB_OF_ERR 9 18-35 ! at error
04614 MB_TC_END 9 0-17 ! Tape control reg at end
04615 MB_TC_ERR 9 18-35 ! at error
04616 MB_DC_END 10 0-17 ! Desired cylinder reg at end
04617 MB_DC_ERR 10 18-35 ! at error
04618 MB_CC_END 11 0-17 ! Current cylinder reg at end
04619 MB_CC_ERR 11 18-35 ! at error
04620 MB_ER2_END 12 0-17 ! Error reg 2 at end
04621 MB_ER2_ERR 12 18-35 ! at error
04622 MB_ER3_END 13 0-17 ! Error reg 3 at end
04623 MB_ER3_ERR 13 18-35 ! at error
04624 MB_ECC1_END 14 0-17 ! ECC position reg at end
04625 MB_ECC1_ERR 14 18-35 ! at error
04626 MB_ECC2_END 15 0-17 ! ECC pattern reg at end
04627 MB_ECC2_ERR 15 18-35 ! at error
04628 END TABLE
04629
04630 !++
04631 ! NXM_TABLE handled by user. May be one bit per page or one bit per word.
04632 !--
04633
04634 TABLE TOPS10
04635 NXM_TAB
04636 NXM_WORD 0 0-35 !Just define the first word of the
04637 !table for now. The length depends on
04638 !the pointer to this table.
04639 END TABLE
04640
04641 !++
04642 !
04643 ! %CCPAR and %CCMPT sub-table definitions.
04644 !
04645 !--
04646
04647 TABLE TOPS10
04648 PAR_SWEEP_DATA ! Info recorded by memory sweep routines
04649 HIGH_ADDRESS 0 0-35 !Highest parity error found last sweep
04650 LAST_REL_ADDRESS 1 0-35 !Relative address in segment.
04651 LAST_SWEEP_COUNT 2 0-35 !Count of errors during last sweep.
04652 TOTAL_SWEEPS 3 0-35 !Number of parity sweeps this load.
04653 USER_ENABLED_COUNT 4 0-35 !Done by diagnostics?
04654 ADDRESS_AND 5 0-35 !On last sweep.
04655 CONTENTS_AND 6 0-35 !On last sweep.
04656 ADDRESS_OR 7 0-35
04657 CONTENTS_OR 8 0-35
04658 CHANNEL_ERRORS 9 0-35 !Count of errors detected by channel
04659 !but not by sweep.
04660 END TABLE
04661
04662 !++
04663 !
04664 ! Contents of ACS
04665 !
04666 !--
04667
04668 TABLE TOPS10 TOPS20
04669 SAVED_ACS
04670 AC0 0 0-35
04671 AC1 1 0-35 !
04672 AC2 2 0-35 !
04673 AC3 3 0-35 !
04674 AC4 4 0-35 !
04675 AC5 5 0-35 !
04676 AC6 6 0-35 !
04677 AC7 7 0-35 !
04678 AC10 8 0-35 !
04679 AC11 9 0-35 !
04680 AC12 10 0-35 !
04681 AC13 11 0-35 !
04682 AC14 12 0-35 !
04683 AC15 13 0-35 !
04684 AC16 14 0-35 !
04685 AC17 15 0-35 !
04686 END TABLE
04687
04688 !++
04689 !
04690 ! SBDIAG tables.
04691 !
04692 !--
04693
04694 TABLE TOPS10 TOPS20
04695 SBDIAG_LIST
04696 NEG_FUNCTION_COUNT 0 0-17 !Count of S-bus diagnostic functions.
04697 CONTROLLER_NUMBER 0 18-35 !Memory controller identifier.
04698 SBDIAG_FUNCTION_0 1 0-35 !Only function 0 and 1 currently
04699 SBDIAG_FUNCTION_1 2 0-35 !
04700 ! SBDIAG_FUNCTION_2 3 0-35
04701 ! SBDIAG_FUNCTION_3 4 0-35
04702 ! SBDIAG_FUNCTION_4 5 0-35
04703 ! SBDIAG_FUNCTION_5 6 0-35
04704 ! SBDIAG_FUNCTION_6 7 0-35
04705 ! SBDIAG_FUNCTION_7 8 0-35
04706 ! SBDIAG_FUNCTION_10 9 0-35
04707 ! SBDIAG_FUNCTION_11 10 0-35
04708 ! SBDIAG_FUNCTION_12 11 0-35
04709 END TABLE
04710
04711 !++
04712 ! The following table defines each word of a ten-word block which may
04713 ! be a list of bad address, good contents, bad contents, or any other
04714 ! list of items saved within an entry.
04715 !--
04716
04717 TABLE TOPS10 TOPS20
04718 TOP_TEN
04719 WORD1 0 0-35 !List of saved addresses or data
04720 WORD2 1 0-35 !
04721 WORD3 2 0-35 !
04722 WORD4 3 0-35 !
04723 WORD5 4 0-35 !
04724 WORD6 5 0-35 !
04725 WORD7 6 0-35 !
04726 WORD8 7 0-35 !
04727 WORD9 8 0-35 !
04728 WORD10 9 0-35 !
04729 END TABLE
04730
04731 !++
04732 ! The following WORD definitions are for all entries
04733 ! in TOPS-10 and TOPS-20.
04734 !--
04735 WORD_10
04736 API_WORD
04737 ADDRESS_SPACE 0-2
04738 ! DEFINE
04739 ! EPT = 0
04740 ! EX_VIRTUAL = 1
04741 ! PHYSICAL = 4
04742 ! END DEFINE
04743 API_FUNCTION 3-5
04744 ! DEFINE
04745 ! STANDARD_INT = 0,1
04746 ! DTE_STD_INT = 7
04747 ! VECTOR_INT = 2
04748 ! INC_DEC_INT = 3
04749 ! EXAMINE_INT = 4
04750 ! DEPOSIT_INT = 5
04751 ! BYTE_INT = 6
04752 ! END DEFINE
04753 QUAL_BIT 6
04754 DEVICE_NUMBER 7-10
04755 ! DEFINE
04756 ! RH20_INT = 0-7
04757 ! DTE_INT = 10-13
04758 ! DIA_INT = 17
04759 ! END DEFINE
04760 API_PHYS_ADDRESS 13-35
04761 END WORD_10
04762
04763 WORD_10 TOPS10 TOPS20
04764 APR_STATUS
04765 ENABLE_24_31 6-13
04766 SWEEP_BUSY 19
04767 MASTER_OSC 22
04768 S_BUS_ERROR 24
04769 APRSTS_NXM 25
04770 IO_PAGE_FAIL 26
04771 MB_PAR 27
04772 CACHE_DIR_PAR 28
04773 ADDRESS_PAR 29
04774 PWR_FAIL 30
04775 SWEEP_DONE 31
04776 INT_REQ 32
04777 PI_LEVEL 33-35
04778 END WORD_10
04779
04780 WORD_10 TOPS10 TOPS20
04781 PAGE_DATAI
04782 MUST_BE_ONES 0-2
04783 CURRENT_BLOCK 6-8
04784 PREV_BLOCK 9-11
04785 PREV_CONTEXT 13-17
04786 UPT_PAGE 23-35
04787 END WORD_10
04788
04789 WORD_10 TOPS10 TOPS20
04790 PAGE_FAIL_WORD
04791 MODE 0
04792 ! DEFINE
04793 ! USER_MODE = 1
04794 ! EXEC_MODE = 0
04795 ! END DEFINE
04796 ACCESSIBLE 2
04797 WRITEABLE 3
04798 SOFTWARE 4
04799 WRITE_REF 5
04800 PUBLIC_MODE 6
04801 CACHEABLE 7
04802 VIRTUAL 8
04803 PF_CODE 1-5
04804 ! DEFINE
04805 ! PROP_VIOLATE = 21
04806 ! ADDRESS_FAIL = 23
04807 ! ILLEGAL_INDIR = 24
04808 ! PAGE_TABLE_PAR = 25
04809 ! ILL_ADDRESS = 27
04810 ! AR_PAR = 36
04811 ! ARX_PAR = 37
04812 ! END DEFINE
04813 VIRTUAL_ADDRESS 18-35
04814 END WORD_10
04815
04816 WORD_10 TOPS10 TOPS20
04817 PAGE_STATUS
04818 CACHE_LOOK 18
04819 CAHE_LOAD 19
04820 KL10_PAGED 21
04821 TRAP_ENABLE 22
04822 EPT_PAGE 23-35
04823 END WORD_10
04824
04825 WORD_10 TOPS10 TOPS20
04826 PI_STATUS
04827 PI_REQUESTS 11-17 !PI levels requesting interrupts (1-7).
04828 WRITE_EVEN_ADR_PAR 18
04829 WRITE_EVEN_DATA_PAR 19
04830 WRITE_EVEN_DIR_PAR 20
04831 PI_IN_PROGRESS 21-27 !PI levels currently waiting to finish.
04832 PI_SYS_ON 28
04833 PI_CHANNELS_ON 29-35 !PI levels capable of interrupting.
04834 END WORD_10
04835
04836 WORD_10 TOPS10 TOPS20
04837 RDERA_STATUS
04838 WORD_NUMBER 0-1 !Failing word within quadword.
04839 SWEEP_REF 2 !Referenced during cache sweep.
04840 CHANNEL_REF 3 !Channel
04841 REF_DATA 4-6
04842 ! DEFINE
04843 ! MEM_RD_OR_RPW = 0
04844 ! CHN_STORE_STATUS = 1
04845 ! CHN_STORE_DATA = 3
04846 ! E_BOX_STORE_FM_AR = 5
04847 ! RD_FM_CACHE = 6
04848 ! CACHE_WRITE_BACK = 7
04849 ! END DEFINE
04850 RDERA_PHYS_ADDRESS 14-35
04851 END WORD_10
04852
04853 ! SBDIAG bit definitions
04854 !--------------------------------------------------------
04855 WORD_10 TOPS10 TOPS20
04856 SBDIAG_FUNCTION_0 ! SBDIAG function 0 bits
04857 SBD0_DMA REFER !DMA-specific stuff
04858 SBD0_NOT_DMA REFER !Bits not found in DMA
04859 SBD0_MF20 REFER !MF20-specific bits
04860 END WORD_10
04861
04862 WORD_10 TOPS10 TOPS20
04863 SBD0_DMA !DMA-specific SBDIAG function 0 bits
04864 SBD0_NXM 2
04865 SBD0_READ_PAR_ERR 3 !Also on MF20.
04866 SBD0_WRITE_PAR_ERR 4 !Also on MF20.
04867 SBD0_ADD_PAR_ERROR 5 !Also on MA/MB and MF20.
04868 SBD0_BUS_MODE 6-7
04869 SBD0_LAST_REQ_BITS 8-11 !RQ0-RQ3 also on MF20.
04870 SBD0_LAST_REQ_READ 12 !Also on MF20.
04871 SBD0_LAST_REQ_WRITE 13 !ALSO on MF20.
04872 SBD0_FIRST_ADDRESS 14-35 !XBUS address on MF20.
04873 END WORD_10
04874
04875 WORD_10
04876 SBD0_NOT_DMA !MA/MB/MF SBDIAG function 0 bits
04877 SBD0_INCOMP_CYCLE 2 !
04878 SBD0_INTERL_MODE 6-7 !
04879 END WORD_10
04880
04881 WORD_10
04882 SBD0_MF20 !MF20 specific bits in SBDIAG function 0
04883 SBD0_CONTR_ERR 0
04884 SBD0_CORR_ERROR 1
04885 END WORD_10
04886
04887 WORD_10 TOPS10 TOPS20
04888 SBDIAG_FUNCTION_1 ! SBDIAG function 1 bit descriptions
04889 SBD1_CONTR_TYPE 8-11 !Common
04890 SBD1_MA_MB REFER !DMA-specific bits
04891 SBD1_NOT_MF REFER !DMA/MA/MB but not MF20
04892 SBD1_MF20 REFER !MF20-specific bits
04893 END WORD_10
04894
04895 WORD_10 TOPS10 TOPS20
04896 SBD1_MA_MB !MA/MB specific SBDIAG function 1 bits
04897 SBD1_SBUS_ADDRESS 14-17
04898 SBD1_LOW_ADR_BOUND 18-21
04899 SBD1_HI_ADR_BOUND 22-25
04900 SBD1_MARGINS_ON 30
04901 SBD1_REQ_ENABLED 32-35 ! RQ0-RQ3
04902 END WORD_10
04903
04904 WORD_10
04905 SBD1_NOT_MF ! DMA/MA/MB but not MF20 SBDIAG function 1 bits
04906 SBD1_MODS_INSTALLED 0-7 !DMA = 0-7, MA/MB = 4-7
04907 SBD1_LOOPBACK_SET 12 !also DMA
04908 END WORD_10
04909
04910 WORD_10
04911 SBD1_MF20 !MF20 specific SBDIAG function 1 bits
04912 SBD1_LOOP_GROUP_SEL 12-14
04913 SBD1_MF20_DISABLED 25
04914 SBD1_MF20_CONDITION 26-27
04915 END WORD_10
04916
04917 !++
04918 !
04919 ! The following functions do not currently exist in the event
04920 ! file. They are documented here in case they are inserted later.
04921 !
04922 !--
04923 !
04924 !WORD_10
04925 ! SBDIAG_FUNCTION_2
04926 ! ERROR_WORD_NUMBER 5-6
04927 ! SELECTED_DATA 7-14 !Diagnostic or PROM.
04928 ! SS_MOS_ADDRESS 20-27
04929 ! RAM_ERROR_TYPE 28-30 !Timing, substitution, response.
04930 !END WORD_10
04931 !
04932 !WORD_10
04933 ! SBDIAG_FUNCTION_3
04934 ! FAST_BUS_ON 8
04935 ! FIXED_VALUE_RAMS 10-13
04936 !END WORD_10
04937 !
04938 !WORD_10
04939 ! SBDIAG_FUNCTION_4
04940 ! SS_CLK_CNTRL_ECHO 9-15
04941 ! REF_ENABLED 21
04942 ! REF_INTRVL_COUNTER 23-30
04943 !END WORD_10
04944 !
04945 !WORD_10
04946 ! SBDIAG_FUNCTION_5
04947 ! SS_MOS_RAS 24-27 !Row address strobe.
04948 !END WORD_10
04949 !
04950 !WORD_10
04951 ! SBDIAG_FUNCTION_6
04952 ! DIAG_DATA_FROM 7-14
04953 ! SS_MOS_CAS 24-27 !State of column address strobe.
04954 !END WORD_10
04955 !
04956 !WORD_10
04957 ! SBDIAG_FUNCTION_7
04958 ! BIT_SUB_RAM_DAT_ECHO 7-14
04959 ! SS_MOS_WRITE_ENABLE 24-27
04960 !END WORD_10
04961 !
04962 !WORD_10
04963 ! SBDIAG_FUNCTION_10
04964 ! ACTIVE_MARGINS 7-10
04965 ! ACTIVE_MARGIN_EN 11-14
04966 ! ECC_INHIBITED 25
04967 ! DC_ERROR 26
04968 !END WORD_10
04969 !
04970 !WORD_10
04971 ! SBDIAG_FUNCTION_11
04972 ! TIM_RAM_DATA_ECHO 21-27
04973 ! 4K_ENABLED 29
04974 ! DESEL_CYC_ENABLED 30
04975 !END WORD_10
04976 !
04977 !WORD_10
04978 ! SBDIAG_FUNCTION_12
04979 ! ADD_RES_RAM_ECHO 8-14
04980 !END WORD_10
04981 !---------------------------------------------------------------
04982 ! End of SBDIAG definitions
04983
04984 !++
04985 !
04986 ! RH10 Registers - Bit Definitions
04987 !
04988 !++
04989
04990 WORD_10 TOPS10 TOPS20
04991 CONI_RH10
04992 RH10_AR_FULL 0 ! SEE KL10 MAINTENANCE HANDBOOK
04993 RH10_CB_FULL 1
04994 RH10_CC_INH 3
04995 RH10_CHAN_ACT 4
04996 RH10_CHAN_PLS 5
04997 RH10_DF22 6
04998 RH10_ILL_FUNCT 9
04999 RH10_SELDR_ADR_E 10
05000 RH10_CDATA_PE 15
05001 RH10_CW_PE 16
05002 RH10_NXM 17
05003 RH10_DBUS_PE 18
05004 RH10_DREXC_ERROR 19
05005 RH10_CHAN_ERROR 20
05006 RH10_CW_WRITE 21
05007 RH10_OVER_RUN 22
05008 RH10_DR_RE_ERROR 23
05009 RH10_ILL_CMD 24
05010 RH10_POWER_FAIL 25
05011 RH10_CBUS_OVRUN 28
05012 RH10_RAE 29
05013 RH10_ATTN 30
05014 RH10_BUSY 31
05015 RH10_DONE 32
05016 END WORD_10
05017 !++
05018 !
05019 ! RH20 Registers - Bit Definitions
05020 !
05021 !++
05022
05023 WORD_10 TOPS10 TOPS20
05024 CONI_STATUS
05025 PIA 33-35 !PI channel assignment
05026 CMD_DONE 32 !command done
05027 PRI_CFL 31 !PTCR register loaded
05028 MBUS_AIE 30 !enable attention interrupts
05029 SEC_CFL 29 !STCR register loaded
05030 MBUS_ATTN 28 !massbus attention active
05031 MBUS_ENAB 27 !enable massbus transactions
05032 OVER_RUN 26 !data overrun error
05033 CHAN_RDY 25 !channel ready for data xfer
05034 REG_A_ERROR 24 !RAE register access error
05035 DR_RE_ERROR 23 !drive response error
05036 CHAN_ERROR 22 !channel error fm MBOX
05037 SHORT_WCE 21 !short word count error
05038 LONG_WCE 20 !long word count error
05039 DRIVE_EXC 19 !drive exception
05040 DATA_PE 18 !data bus parity error
05041 END WORD_10
05042 !++
05043 !
05044 ! Each of the eight data channels associated with an RH20 has a four-word reset
05045 ! and status logout area in the executive process table (EPT). Word 0 of each
05046 ! channel's reset and logout area is the initial control word address; that is,
05047 ! it is the location from which the channel takes the first channel command
05048 ! when CBUS RESET has been asserted by the RH20 at the start of the data
05049 ! transfer. Words 1-3 contain the two channel status words and an unused
05050 ! location. The channel loads words 1 and 2 with status info at the end of data
05051 ! transfer when CBUS STORE has been asserted by the RH20. WOrd 3 is not used.
05052 !
05053 !--
05054 WORD_10 TOPS20 TOPS10
05055 CHAN_LOGOUT_1
05056 MEM_PE 01 ! Indicates that a memory parity
05057 ! error was detected during a
05058 ! control word fetch.
05059 ADR_PE 02 ! SBUS address parity error detected
05060 ! during a channel control word fetch.
05061 CHAN_NXM 04 ! Memory failed to respond to an
05062 ! address during a channel memory
05063 ! cycle.
05064 LXE 09 ! MBOX detected a data parity error
05065 ! or address parity error or a
05066 ! non-existent memory at the end
05067 ! of the last data transfer.
05068 RH20_ERR 10 ! RH20 sent CBUS Start to the channel
05069 ! when the channel had the CBUS
05070 ! ready line asserted.
05071 LGWC 11 ! Indicates that the RH20 completed
05072 ! a data transfer and the channel did
05073 ! not reach the final word count
05074 ! specified by the channel control
05075 ! word (CCW).
05076 SHWC 12 ! Indicates that the channel transferred
05077 ! all the data specified by the CCW
05078 ! and the RH20 was not through
05079 ! transferring data.
05080 OVN 13 ! On a READ data transfer the RH20 is
05081 ! sending data faster than the MBOX can
05082 ! transfer data to memory.
05083 ! On a WRITE data transfer the RH20
05084 ! is requesting data faster than the
05085 ! MBOX can read data from memory.
05086 END WORD_10
05087
05088 WORD_10 TOPS20
05089 SBAR !secondary block addr reg
05090 PREP_REG REFER !common to all registers
05091 BLOCK_ADDRESS 20-35 !disk block address
05092 END WORD_10
05093
05094 WORD_10 TOPS20
05095 STCR !secondary transfer control reg
05096 PREP_REG REFER !common to all registers
05097 RESET_CLP 7 !reset command list pointer
05098 STORE_STAT 10 !store termination status
05099 DIS_XFER 19 !disable transfer error stop
05100 NEG_BLK_CNT 20-29 !negative block count
05101 FUNCTION_CODE 30-35 !function code for command
05102 END WORD_10
05103
05104 WORD_10 TOPS20
05105 PBAR !primary block addr reg
05106 PREP_REG REFER !common to all registers
05107 BLOCK_ADDRESS 20-35 !disk block address
05108 END WORD_10
05109
05110 WORD_10 TOPS20
05111 PTCR !primary transfer control reg
05112 PREP_REG REFER !common to all registers
05113 RESET_CLP 7 !reset command list pointer
05114 STORE_STAT 10 !store termination status
05115 DIS_XFER 19 !disable transfer error stop
05116 NEG_BLK_CNT 20-29 !negative block count
05117 FUNCTION_CODE 30-35 !function code for command
05118 END WORD_10
05119
05120 WORD_10 TOPS20
05121 IVIR !interrupt vector index reg
05122 PREP_REG REFER !common to all registers
05123 VECT_INTR_ADDR 27-35 !vector interrupt address
05124 END WORD_10
05125
05126 WORD_10 TOPS20
05127 RR !read register
05128 PREP_REG REFER !common to all registers
05129 PAR_BIT 17 !parity bit
05130 DIAG_WRITE_DATA 18-35 !write data during maint mode
05131 END WORD_10
05132
05133 WORD_10 TOPS20
05134 WR !write register
05135 PREP_REG REFER !common to all registers
05136 PAR_BIT 17 !parity bit
05137 DIAG_READ_DATA 18-35 !read data during maint mode
05138 END WORD_10
05139
05140 WORD_10 TOPS20
05141 DCR !diagnostic control register
05142 PREP_REG REFER !common to all registers
05143 XFER_SIG 26 !simulates massbus TRANSFER sig
05144 DATA_LOOP 27 !data loopback from massbus
05145 TEST_SBAR 28 !test SBAR register
05146 EVEN_PAR_CHK 29 !even parity check test
05147 READ_WRITE 30 !R/W set for diag read
05148 SIM_D_EXC 31 !simulate massbus exception
05149 SIM_EOB 32 !simulate massbus end of block
05150 SIM_ATTN 34 !simulate massbus attention
05151 SIM_SCLK 35 !simulate massbus S clock
05152 END WORD_10
05153
05154 WORD_10 TOPS20
05155 PREP_REG
05156 REG_SEL_CODE 0-5 !register select code
05157 LOAD_REG 6 !load register bit
05158 DIS_RAE 9 !disable register access error stop
05159 DEV_SEL_CODE 15-17 !device select code
05160 CBUS_EP 8 !control bus parity
05161 END WORD_10
05162
05163 WORD_10 TOPS20
05164 CONO !conditions out information
05165 CLEAR_RAE 24 !clear reg access error
05166 CLEAR_MBC 25 !clear massbus controller
05167 CLEAR_XFER 26 !clear transfer
05168 MBUS_ENAB 27 !enable the massbus
05169 CONO_RESET_CLP 28 !reset the cmd list pointer
05170 DEL_SCR 29 !delete current cmd in STCR
05171 ATTEN_ENABLE 30 !enable attention interrupt
05172 STOP 31 !stop the channel
05173 CLEAR_DONE 32 !clear out done flag
05174 PIA 33-35 !PI channel assignment
05175 END WORD_10
05176
05177 !++
05178 !
05179 ! KLIPA CSR BIT DEFINITIONS (WORD)
05180 !
05181 !--
05182 WORD_10 TOPS10 TOPS20
05183 CSR_REG !status register
05184 PORT_PRESENT 0 !port present (on means klipa not rh20)
05185 DIAG_RQST_CSR 1 !uproc is requesting csr
05186 DIAG_CSR_CHNG 2 !csr has changed since uproc last read
05187 !NOT DEFINED 3 !
05188 RQST_EXAM_DEP 4 !uproc requests ebus for exam or dep
05189 RQST_INTER 5 !uproc requests ebus interupt
05190 CRAM_PAR 6 !cram parity error(can be software set)
05191 MBUS_ERR 7 !more then one mbus drive turned on
05192 !NOT DEFINED 8-11 !
05193 SPARE_11 11 !
05194 DISABLE_COMP 12 !uproc has disabled itself
05195 ENABLE_COMP 13 !uproc has enabled itself
05196 !NOT DEFINED 14 !
05197 PORT_ID_CODE 15-17 !kl10 should see 011, port - 000
05198 CLEAR_PORT 18 !kl10 is reseting klipa
05199 DIAG_TEST_EBUF 19 !enables kl10 ebus loopback testing
05200 DIAG_GEN_EBUS_PE 20 !kl10 forces ebus bad parity
05201 DIAG_SEL_LAR 21 !kl10 reads lar
05202 DIAG_SINGLE_CYC 22 !enable single cycle
05203 SPARE_23 23 !
05204 EBUS_PARITY_ERR 24 !ebus parity error detected
05205 !NOT DEFINED 25 !
05206 CHAN_ERR 26 !error detected by kl10 mbox
05207 CMD_QUEUE_AVAIL 27 !kl10 just put entry in queue
05208 RSP_QUEUE_AVAIL 28 !uproc just put entrY in queue
05209 !NOT DEFINED 29 !
05210 DISABLE 30 !kl10 asks uproc to disable itself
05211 ENABLE 31 !kl10 asks uproc to enable itself
05212 MPROC_RUN 32 !reset cram control & enable clocks
05213 PIA 33-35 !kl10 interupt level
05214 END WORD_10
05215
05216 !++
05217 ! Bits defined in PDP-11 format
05218 !--
05219
05220 !++
05221 !
05222 ! RH11 - Register Definitions
05223 !
05224 !++
05225
05226 WORD_10 TOPS10 TOPS20
05227 UBA_STATUS
05228 UBA_STAT_TIME_OUT 18 !UNIBUS arbitrator time out or NXM
05229 UBA_STAT_BAD_MDATA 19 !Bad memory data
05230 UBA_STAT_BUS_PE 20 !KS10 (backplane) bus parity error
05231 UBA_STAT_NXD 21 !Nonexistant device
05232 UBA_STAT_HI_INT 24 !High level interrupt pending
05233 UBA_STAT_LO_INT 25 !Low " " "
05234 UBA_STAT_ACDC_LO 26 !AC or DC low
05235 UBA_STAT_DIS_XFR 28 !Disable transfer if BMD (bit 19=1)
05236 UBA_STAT_INIT_UBA 29 !Init UBA and unibus devices
05237 UBA_STAT_HIGH_PI 30-32 !High level PI number
05238 UBA_STAT_LOW_PI 33-35 !low level PI number
05239 END WORD_10
05240
05241 WORD_11 TOPS10 TOPS20
05242 RH11_RMCS2 !control and status reg 2
05243 DATA_LATE 15 !data late error
05244 WR_CK_ERROR 14 !write check error
05245 UBUS_PE 13 !unibus parity error
05246 NON_X_DRIVE 12 !non existent drive
05247 NXM 11 !non existent memory error
05248 PROG_ERROR 10 !program error
05249 MISS_XFER 9 !missed transfer error
05250 MBUS_DPE 8 !massbus data parity error
05251 OUT_READY 7 !output ready
05252 IN_READY 6 !input ready
05253 CONT_CLEAR 5 !controller clear
05254 PAR_TEST 4 !parity logic test
05255 BAI_INH 3 !inhibit increment of BA reg
05256 UNIT_SEL 2-0 !unit select
05257 END WORD_11
05258
05259 WORD_11 TOPS10 TOPS20
05260 RH11_RMBA !bus addres register
05261 BUS_ADDRESS 15-0 !unibus address
05262 END WORD_11
05263
05264 WORD_11 TOPS10 TOPS20
05265 RH11_RMDB !data buffer reg
05266 DATA 15-0 !data from bus
05267 END WORD_11
05268
05269 WORD_11 TOPS10 TOPS20
05270 RH11_RMWC !word count reg
05271 WORD_COUNT 15-0 !negative word count
05272 END WORD_11
05273
05274 !++
05275 ! RS04 Error Register Bit Definitions (from error register 1 offset)
05276 !__
05277
05278 WORD_11 COMMON
05279 RSER
05280 RS04_DCK 15 ! Data2Check
05281 RS04_UNS 14 ! Unsafe
05282 RS04_OPI 13 ! Operation incomplete
05283 RS04_DTE 12 ! Drive Timing Error
05284 RS04_WLE 11 ! Write lock error
05285 RS04_IAE 10 ! Invalid Address Error
05286 RS04_AO 9 ! Address overflow
05287 RS04_PAR 3 ! Bus Parity Error
05288 RS04_RMR 2 ! Register Modify Refused
05289 RS04_ILR 1 ! Illegal Register
05290 RS04_ILF 0 ! Illegal Function
05291 END WORD_11
05292
05293 !+++
05294 !
05295 ! RP04 / RP06 Register Bit Definitions
05296 !
05297 !+++
05298
05299 WORD_11 COMMON
05300 DS !drive status register
05301 ATTN_ACT 15 !attention active
05302 ERROR 14 !drive error
05303 PIP 13 !positioning in progress
05304 MOL 12 !medium on line
05305 WRITE_LOCK 11 !write lock switch on
05306 LAST_SECT 10 !last sector
05307 PROG_ABLE 9 !programmable
05308 DRIVE_PRES 8 !drive preset
05309 DRIVE_READY 7 !drive ready
05310 VALID_VOL 6 !valid volume
05311 RP4_DEQ1 5 !diff equal 1
05312 RP4_DLT64 4 !diff less than 64
05313 RP4_GOREV 3 !go reverse
05314 RP4_DIGB 2 !drive to inner guard band
05315 RP4_DF20 1 !drive fwd 20 ips
05316 RP4_DF5 0 !drive fwd 5 ips
05317 END WORD_11
05318
05319 WORD_11 COMMON
05320 ER1 !error reg 1
05321 DATA_CHECK 15 !data check during read data
05322 UNSAFE 14 !drive unsafe condition
05323 OPER_INC 13 !operation incomplete
05324 DR_T_ERROR 12 !drive timing error
05325 WR_LK_ERROR 11 !write lock error
05326 I_ADR_ERROR 10 !invalid address error
05327 A_OV_ERROR 9 !address overflow error
05328 HCRC_ERROR 8 !header CRC error
05329 H_COM_ERROR 7 !header compare error
05330 ECC_ERROR 6 !hard ECC error
05331 WR_CK_FAIL 5 !write clock failure
05332 FMT_ERROR 4 !format error
05333 PAR_ERROR 3 !parity error in drive
05334 RMR 2 !reg modification refused
05335 ILL_REG 1 !illegal reg reference
05336 ILL_FUNCT 0 !illegal function attempted
05337 END WORD_11
05338
05339 WORD_11 COMMON
05340 MR !maintenance register
05341 HI_CT_DET 10 !high count detected
05342 SBYTE_DET 9 !sync byte detected
05343 ZERO_DET 8 !zeros detected
05344 DATA_ENV 7 !data envelope detected
05345 ECC_ENV 6 !ECC envelope detected
05346 MAINT_WRITE 5 !maintenance write operation
05347 MAINT_READ 4 !maintenance read operation
05348 MAINT_SCLK 3 !maintenance S clock
05349 MAINT_INDEX 2 !maintenance index clock
05350 MAINT_CLOCK 1 !maintenance clock
05351 DIAG_MODE 0 !diagnostic mode
05352 END WORD_11
05353
05354 WORD_11 COMMON
05355 AS !attention summary reg
05356 ATA7 7 !attention active from unit 7
05357 ATA6 6 !attention active from unit 6
05358 ATA5 5 !attention active from unit 5
05359 ATA4 4 !attention active from unit 4
05360 ATA3 3 !attention active from unit 3
05361 ATA2 2 !attention active from unit 2
05362 ATA1 1 !attention active from unit 1
05363 ATA0 0 !attention active from unit 0
05364 END WORD_11
05365
05366 WORD_11 COMMON
05367 DA !drive address reg
05368 TRACK 12-8 !track number
05369 SECTOR 4-0 !sector address
05370 RP7_TRACK 13-8 !track number
05371 RP7_SECTOR 6-0 !sector address
05372 END WORD_11
05373
05374 WORD_11 COMMON
05375 DT !drive type register
05376 NO_BLK_ADR 15 !not block addressable
05377 TAPE_DRIVE 14 !tape drive unit
05378 MOVE_HEAD 13 !moving head device
05379 DRIVE_REQ 11 !drive request required
05380 !dual port drive only
05381 DRIVE_TYPE 8-0 !drive type designator
05382 END WORD_11
05383
05384 WORD_11 COMMON
05385 LA !look ahead register
05386 SECTOR_COUNT 10-6 !current sector under head
05387 EXT_FIELD 5-4 !counter extension field
05388 END WORD_11
05389
05390 WORD_11 COMMON
05391 SN !serial number register
05392 SERIAL_NO 15-0 !serial no. in BCD (4 digits)
05393 END WORD_11
05394
05395 WORD_11 COMMON
05396 OF !offset register
05397 SIGN_CNG 15 !sign change
05398 FMT22 12 !22 sector format
05399 ECC_INH 11 !inhibit ECC checking
05400 H_COM_INH 10 !inhibit header compare errors
05401 OFFSET 7-0 !offset magnitude and direction
05402 END WORD_11
05403
05404 WORD_11 COMMON
05405 DC !desired cylinder
05406 RP4_DCYL_NO 8-0 !desired cylinder for RP04
05407 RP6_DCYL_NO 9-0 !desired cylinder for RP06
05408 END WORD_11
05409
05410 WORD_11 COMMON
05411 CC !current cylinder
05412 RP4_CCYL_NO 8-0 !current cylinder for RP04
05413 RP6_CCYL_NO 9-0 !current cylinder for RP04
05414 RP7_CCYL_NO 9-0 !current cylinder for RP07
05415 END WORD_11
05416
05417 WORD_11 COMMON
05418 ER2 !error register 2
05419 RP4_ACUN 15 !AC unsafe
05420 RP7_PGE 15
05421
05422 RP7_CRM_PE 14 !CROM parity error
05423
05424 PLO_UNS 13 !PLO unsafe
05425 RP7_CPU 13
05426
05427 RP4_30VU 12 !30 volts unsafe
05428 RP7_RWU3 12
05429
05430 INDEX_ERROR 11 !index clock error
05431 RP7_RWU2 11
05432
05433 NO_H_SEL 10 !no head select error
05434 RP7_RWU1 10
05435
05436 MULTI_H_SEL 9 !multiple head select error
05437 RP7_WOR 9
05438
05439 WRITE_UNS 8 !write unsafe
05440
05441 RP7_ERR_CODE 7-0
05442 RP4_FA_EN 7 !failsafe enable
05443 RP6_AB_ST 7 !abnormal stop
05444 RP4_FA_EN_6_AB_ST 7 !Either way
05445
05446 TRAN_UNSF 6 !transitions unsafe
05447
05448 TRAN_DET_F 5 !transitions detected failed
05449
05450 RP6_RP4_MSE 4 !motor sequence error
05451 RD_WR_UNSF 4 !read write unsafe
05452 RP4_MSE_6_RD_WR_UNSF 4 !Either way
05453
05454 C_SW_UNSF 3 !
05455
05456 W_SEL_UNSF 2 !
05457
05458 C_SK_UNSF 1 !
05459
05460 WR_C_UNSF 0 !write clock unsafe
05461 END WORD_11
05462
05463 WORD_11 COMMON
05464 ER3 !error register 3
05465 OFF_CYL 15 !off cylinder error
05466 RP7_BSE 15
05467
05468 SEEK_INC 14 !seek incomplete
05469
05470 RP6_OPER 13 !operator plug error
05471 RP7_DSE 13
05472 RP7_IVC 12
05473 RP7_CLF 11
05474 RP7_LBC 10
05475 RP7_LCE 9
05476 RP7_PHF 8
05477 RP7_DVC 7
05478
05479 AC_LOW 6 !AC low error
05480 RP7_IXU 6
05481
05482 DC_LOW 5 !DC low error
05483 RP7_DCU 5
05484
05485 RP6_35_VF 4 !35 volt supply failure
05486 RP4_NOT_6_35V 4 !Because different on RP04
05487 RP7_SDF 4
05488
05489 RP4_UNSF 3 !drive unsafe
05490 RP7_DPE 3
05491
05492 RP7_SBE 2
05493
05494 RP4_VE_US 1 !velocity unsafe
05495 RP6_WR_OS 1 !write with offset error
05496 RP4_VE_US_6_WR_OS 1 !Either way
05497 RP7_SCF 1
05498
05499 RP4_PS_UN 0 !power unsafe
05500 RP6_DC_UN 0 !DC unsafe
05501 RP4_PS_UN_6_DC_UN 0 !Either way
05502 RP7_RTO 0
05503 END WORD_11
05504
05505 WORD_11 COMMON
05506 ECC1 !ECC position register
05507 ECC_ERR_LOC 12-0 !location of error burst
05508 END WORD_11
05509
05510 WORD_11 COMMON
05511 ECC2 !ECC pattern register
05512 ECC_ERR_MASK 10-0 !error bit mask - 11 bits
05513 END WORD_11
05514
05515 !++
05516 !
05517 ! RM03 Registers - bit definitions
05518 !
05519 !--
05520
05521 WORD_11 COMMON
05522 RMCS1 !RM03 control register 1
05523 RH11_SPEC_COND 15 !special condition - RH11 only
05524 RH11_XFER_ERROR 14 !transfer error - RH11 only
05525 RH11_MBUS_CPE 13 !massbus control bus parity
05526 !error - RH11 only
05527 DRIVE_AVAIL 12 !drive available
05528 PORT_SEL 10 !port select
05529 UBADDR_EXT 9-8 !unibus adr extension bits
05530 READY 7 !unit ready
05531 INTR_ENAB 6 !interrupt enable
05532 FUNCTION 5-0 !drive function + go
05533 GO 0 !go
05534 END WORD_11
05535
05536 WORD_11 COMMON
05537 RMDS !RM03 drive status register
05538 ATTN_ACT 15 !attention active
05539 ERROR 14 !inclusive OR error bit
05540 PIP 13 !positioning in progress
05541 MOL 12 !medium on line
05542 WRITE_LOCK 11 !write lock
05543 LAST_BLOCK 10 !last block transferred
05544 PROG_ABLE 9 !programmable - dual port only
05545 DRIVE_PRES 8 !drive present
05546 DRIVE_READY 7 !drive ready
05547 VALID_VOL 6 !valid volume
05548 OFSET_MODE 0 !offset mode active
05549 END WORD_11
05550
05551 WORD_11 COMMON
05552 RMER1 !RM03 error register 1
05553 DATA_CHECK 15 !data check error
05554 UN_SAFE 14 !unsafe condition
05555 OPER_INC 13 !operation incomplete
05556 DR_T_ERROR 12 !drive timing error
05557 WR_LK_ERROR 11 !write lock error
05558 I_ADR_ERROR 10 !invalid address error
05559 A_OV_ERROR 9 !address overflow error
05560 H_CRC_ERROR 8 !header CRC error
05561 H_COM_ERROR 7 !header compare error
05562 ECC_ERROR 6 !hard ECC error
05563 WR_CK_FAIL 5 !write clock failure
05564 FMT_ERROR 4 !format error
05565 PAR_ERROR 3 !drive parity error
05566 RMR 2 !register modification refused
05567 ILL_REG 1 !illegal register reference
05568 ILL_FUNCT 0 !illegal function attempted
05569 END WORD_11
05570
05571 WORD_11 COMMON
05572 RMMR1 !RM03 maintenance register 1
05573 OCCUP 15 !occupied
05574 RUN_GO 14 !run / go
05575 END_BLOCK 13 !end of block level
05576 RX_EXCPT 12 !received exception
05577 ENB_SERCH 11 !enable search
05578 LOOK_SYNC 10 !pack looking for sync
05579 CRC_OUT 9 !enable CRC output
05580 PACK_DATA 8 !pack data area
05581 PACK_HEADER 7 !pack header area
05582 CONT 6 !continue
05583 PROM_STROB 5 !PROM strobe
05584 ENB_ECC 4 !enable ECC out
05585 WRITE_DATA 3 !write data
05586 LAST_SECTR 2 !last sector
05587 LAST_S_T 1 !last sector and track
05588 DIAG_MODE 0 !diagnostic mode
05589 END WORD_11
05590
05591 WORD_11 COMMON
05592 RMAS !RM03 attention summary
05593 ATTN7 7 !drive 7 attn active
05594 ATTN6 6 !drive 6 attn active
05595 ATTN5 5 !drive 5 attn active
05596 ATTN4 4 !drive 4 attn active
05597 ATTN3 3 !drive 3 attn active
05598 ATTN2 2 !drive 2 attn active
05599 ATTN1 1 !drive 1 attn active
05600 ATTN0 0 !drive 0 attn active
05601 END WORD_11
05602
05603 WORD_11 COMMON
05604 RMDA !RM03 drive address
05605 RM_TRACK 10-8 !track address
05606 SECTOR 4-0 !sector address
05607 END WORD_11
05608
05609 WORD_11 COMMON
05610 RMDT !RM03 drive type register
05611 MOVE_HEAD 13 !moving head disk
05612 DRIVE_REQ 11 !drive request required
05613 DRIVE_TYPE 8-0 !drive type
05614 END WORD_11
05615
05616 WORD_11 COMMON
05617 RMLA !RM03 look ahead register
05618 SECT_CNT 10-6 !sector count
05619 END WORD_11
05620
05621 WORD_11 COMMON
05622 RMSN !RM03 serial number register
05623 SER_NUM 15-0 !serial number in BCD code
05624 END WORD_11
05625
05626 WORD_11 COMMON
05627 RMOF !RMo3 offset register
05628 FMT_16 12 !16 bit format
05629 ECC_INH 11 !inhibit ECC checking
05630 H_COM_INH 10 !inhibit header compare chk
05631 OFFSET_DIRTN 7 !offset direction
05632 END WORD_11
05633
05634 WORD_11 COMMON
05635 RMDC !RM03 desired cylinder reg
05636 RM_DCYL_NO 9-0 !desired cylinder number
05637 END WORD_11
05638
05639 WORD_11 COMMON
05640 RMMR2 !RM03 maint register 2
05641 REQ_A 15 !request on port A
05642 REQ_B 14 !request on port B
05643 CONTR_TAG_A 13 !controller select tag
05644 COMND_BRNCH 12 !command sequencer is branching
05645 CONTR_TAG_B 11 !controller tag B
05646 HEAD_TAG 10 !controller select or head select tag
05647 BUS_IN_LINES 9-0 !bus in bits
05648 END WORD_11
05649
05650 WORD_11 COMMON
05651 RMER2 !RM03 error register 2
05652 BAD_SECTOR 15 !bad sector
05653 SEEK_INC 14 !seek incomplete
05654 OPER_PLUG 13 !operator plug error
05655 INVLD_CMD 12 !invalid command
05656 LOSS_CLK 11 !lost clocks
05657 LOSS_CHK 10 !loss of bit check
05658 DC_FAULT 7 !DC or head select fault
05659 DATA_ERROR 3 !data error
05660 END WORD_11
05661
05662 WORD_11 COMMON
05663 RMECC1 !ECC position register
05664 ECC_POSITION 12-0 !position of error burst
05665 END WORD_11
05666
05667 WORD_11 COMMON
05668 RMECC2 !ECC pattern register
05669 ECC_PATTERN 10-0 !error pattern mask
05670 END WORD_11
05671 !++
05672 !
05673 ! Error register definitions for TM02/3
05674 !
05675 !--
05676
05677 WORD_11 COMMON
05678 MB_ERR ! Error register
05679 TM_PE_CORR 15 ! Correctible data error if PE
05680 TM_NRZI_CRC 15 ! CRC does not match computed CRC
05681 TM_PE_CORR_NRZI_CRC 15 ! Either
05682 TM_UNSAFE 14 !
05683 TM_OPER_INC 13 ! Operation incomplete
05684 TM_DR_T_ERROR 12 ! Drive timing error
05685 TM_NXF 11 ! Nonexecutable function
05686 TM_PE_CS 10 ! PE correctable skew
05687 TM_NRZI_ITM 10 ! Illegal tape mark
05688 TM_PE_CS_NRZI_ITM 10 ! Either of above
05689 TM_F_C_ERR 9 ! Frame count error
05690 TM_N_STD_GAP 8 ! Non standard gap
05691 TM_PE_PFE 7 ! Format error if PE
05692 TM_NRZI_LRC 7 ! Check char error if NRZI
05693 TM_PE_FE_NRZI_LRC 7 ! Either of above
05694 TM_PE_NDE 6 ! Noncorrectable data error if PE
05695 TM_NRZI_VPE 6 ! Vertical parity error if NRZI
05696 TM_PE_NDE_NRZI_VPE 6 ! Either of above
05697 TM_DBUS_PE 5 ! Data bus parity error
05698 TM_FMT_ERROR 4 ! Format error
05699 TM_CBUS_PE 3 ! control bus parity
05700 TM_REG_MOD 2 ! register modification refused
05701 TM_ILL_REG 1 ! Illegal register
05702 TM_ILL_FUNC 0 ! illegal function
05703 END WORD_11
05704
05705
05706 !++
05707 ! DECNET "Event Logging Message" word definitions
05708 !--
05709
05710 WORD_11 COMMON
05711 SINK_FLAGS
05712 MONITOR 2
05713 FILE 1
05714 CONSOLE 0
05715 END WORD_11
05716
05717
05718 WORD_11 COMMON
05719 EVENT_CODE ! DECNET "Event Logging message"
05720 EVENT_CLASS 14-6
05721 EVENT_TYPE 4-0
05722 END WORD_11
05723
05724
05725 WORD_11 COMMON
05726 DATA_ID
05727 PARAMETER_COUNTER_FLAG 15 ! 0 = Parameter data
05728 ! 1 = Counter data
05729 ! Bit definitions for Parameter data
05730 ! Reserved 14-12
05731 PARAMETER_TYPE 11-0
05732 ! Bit definitions for Counter data
05733 COUNTER_WIDTH 14-13 ! 0 = reserved
05734 ! 1 = 8 bits
05735 ! 2 = 16 bits
05736 ! 3 = 32 bits
05737 BIT_MAPPED_FLAG 12 ! 0 = Not bit mapped
05738 ! 1 = Bit mapped
05739 COUNTER_TYPE 11-0 ! Decimal counter number
05740 END WORD_11
05741
05742
05743 WORD_11 COMMON
05744 DATA_TYPE ! Present for Parameter data only
05745 CODED_FLAG 7 ! 0 = Not coded
05746 ! 1 = Coded
05747 ! Bit definitions for Non-coded data
05748 FIELD_TYPE 6 ! 0 = Binary number
05749 ! 1 = ASCII image field
05750 ! bits 5-0 = 0
05751 OUTPUT_FORMAT 5-4 ! 0 = Unsigned decimal number
05752 ! 1 = Signed decimal number
05753 ! 2 = Hexadecimal number
05754 ! 3 = Octal number
05755 DATA_LENGTH 3-0 ! 0 = Data is image field
05756 ! Bit definitions for Coded data
05757 MULTIPLE_FIELD 6 ! 0 = Single field
05758 ! 1 = Multiple field
05759 FIELD_COUNT 5-0 ! Number of bytes for Single field
05760 ! Number of fields for Multiple fields
05761 END WORD_11
05762
05763
05764
05765
05766
05767
05768
05769
05770
05771
05772
05773 !++
05774 !
05775 ! End of DEFINE.EYE
05776 !
05777 !--
CREF TABLES:
FIELD NAME FIELD DESC BLOCK NAME LINE #
$R110E 1 3 FE_RELOAD_20 1541
$R111E 1 4 FE_RELOAD_20 1542
$R1ASF 1 5 FE_RELOAD_20 1543
$R1BSF 1 10 FE_RELOAD_20 1548
$R1DPF 1 2 FE_RELOAD_20 1540
$R1GTF 1 0 FE_RELOAD_20 1538
$R1NRL 1 11 FE_RELOAD_20 1549
$R1OPF 1 1 FE_RELOAD_20 1539
$R1PDF 1 7 FE_RELOAD_20 1545
$R1PUF 1 8 FE_RELOAD_20 1546
$R1RLF 1 6 FE_RELOAD_20 1544
$R1RMF 1 9 FE_RELOAD_20 1547
$R1RTC 1 30-35 FE_RELOAD_20 1556
AC0 0 0-35 AC_BLOCK_6_DATA 2312
AC0 0 0-35 AC_BLOCK_7_DATA 2321
AC0 0 0-35 SAVED_ACS 4671
AC1 1 0-35 AC_BLOCK_6_DATA 2313
AC1 1 0-35 AC_BLOCK_7_DATA 2322
AC1 1 0-35 SAVED_ACS 4672
AC10 8 0-35 SAVED_ACS 4679
AC11 9 0-35 SAVED_ACS 4680
AC12 4 0-35 AC_BLOCK_6_DATA 2316
AC12 10 0-35 SAVED_ACS 4681
AC13 11 0-35 SAVED_ACS 4682
AC14 12 0-35 SAVED_ACS 4683
AC15 13 0-35 SAVED_ACS 4684
AC16 14 0-35 SAVED_ACS 4685
AC17 15 0-35 SAVED_ACS 4686
AC2 2 0-35 AC_BLOCK_6_DATA 2314
AC2 2 0-35 AC_BLOCK_7_DATA 2323
AC2 2 0-35 SAVED_ACS 4673
AC3 3 0-35 AC_BLOCK_6_DATA 2315
AC3 3 0-35 SAVED_ACS 4674
AC4 4 0-35 SAVED_ACS 4675
AC5 5 0-35 SAVED_ACS 4676
AC6 6 0-35 SAVED_ACS 4677
AC7 7 0-35 SAVED_ACS 4678
ACCESSIBLE ** 2 PAGE_FAIL_WORD 4796
ACRCERR ** 04 ECCSTA 3276
ACRC_WMC_DRBUS ** 02 WMCSTA 3544
AC_BLOCK_6_DATA 90 BODY KL_CPU_STATUS_10 1158
AC_BLOCK_6_DATA 90 BODY KL_CPU_STATUS_20 1676
AC_BLOCK_7_DATA 95 BODY KL_CPU_STATUS_10 1159
AC_BLOCK_7_DATA 95 BODY KL_CPU_STATUS_20 1677
AC_LOW ** 6 ER3 5479
ADDRESS_AND 5 0-35 CPU_PAR_INT_20 1635
ADDRESS_AND 5 0-35 PAR_SWEEP_DATA 4655
ADDRESS_AND 9 0-35 NXM_MEMORY_SWEEP_10 1034
ADDRESS_AND 11 0-35 OLD_CPU_NXM_ERR_10 281
ADDRESS_OR 6 0-35 CPU_PAR_INT_20 1636
ADDRESS_OR 7 0-35 PAR_SWEEP_DATA 4657
ADDRESS_OR 10 0-35 NXM_MEMORY_SWEEP_10 1035
ADDRESS_OR 12 0-35 OLD_CPU_NXM_ERR_10 282
ADDRESS_PAR ** 29 APR_STATUS 4773
ADJ_NODE_NAME 3 MAIN$Z NET_HARDWARE_ERR 1755
ADR_PE ** 02 CHAN_LOGOUT_1 5059
ALTERNATE_CNTLR ** 5 DT_SB_2 4467
AMT ** 05 ECCSTA 3277
AMTIE ** 7-0 RAMT 3094
AMTIE0 ** 02 CH0TIE 3293
AMTIE1 ** 02 CH1TIE 3307
AMTIE2 ** 02 CH2TIE 3322
AMTIE3 ** 02 CH3TIE 3338
AMTIE4 ** 02 CH4TIE 3354
AMTIE5 ** 02 CH5TIE 3370
AMTIE6 ** 02 CH6TIE 3385
AMTIE7 ** 02 CH7TIE 3401
AMTIEP ** 02 CHPTIE 3416
AMTIE_P ** 00 PSTAT 3451
AMTIE_P ** 00 RPSTA 3195
AMTIE_THR ** 1-0 TUDIAG 3857
APRSTS_NXM ** 25 APR_STATUS 4769
APR_ID 0 0-35 KL_CPU_STATUS_10 1140
APR_ID 0 0-35 KL_CPU_STATUS_20 1658
APR_STATUS 0 0-35 CPU_PAR_INT_20 1630
APR_STATUS 1 0-35 KL_CPU_STATUS_10 1141
APR_STATUS 1 0-35 KL_CPU_STATUS_20 1659
APR_STATUS 2 0-35 KL_PAR_NXM_INT_10 956
APR_STATUS 11 0-35 CPU_PAR_INT_10 1125
APR_STATUS 35 0-35 MONITOR_BUG_DATA_20 1351
ARA_ERR ** 5 MIAB_STAT 3819
ASENSE_BYTES 4 0-35 CSB_DX10 2402
AT0 ** 0 DM_AS 4354
AT1 ** 1 DM_AS 4355
AT2 ** 2 DM_AS 4356
AT3 ** 3 DM_AS 4357
AT4 ** 4 DM_AS 4358
AT5 ** 5 DM_AS 4359
AT6 ** 6 DM_AS 4360
AT7 ** 7 DM_AS 4361
ATA ** 03 CASSTA 3482
ATA0 ** 0 AS 5363
ATA1 ** 1 AS 5362
ATA2 ** 2 AS 5361
ATA3 ** 3 AS 5360
ATA4 ** 4 AS 5359
ATA5 ** 5 AS 5358
ATA6 ** 6 AS 5357
ATA7 ** 7 AS 5356
ATN_CAS_4 4 0-17 TM78_CAS_REGS 2547
ATN_CAS_4 4 18-35 TM78_CAS_REGS 2547
ATTEMPTED_CONTINUES 3 0-35 CPU_PAR_INT_10 1117
ATTEN_ENABLE ** 30 CONO 5171
ATTN0 ** 0 RMAS 5600
ATTN1 ** 1 RMAS 5599
ATTN2 ** 2 RMAS 5598
ATTN3 ** 3 RMAS 5597
ATTN4 ** 4 RMAS 5596
ATTN5 ** 5 RMAS 5595
ATTN6 ** 6 RMAS 5594
ATTN7 ** 7 RMAS 5593
ATTN_ACT ** 15 DS 5301
ATTN_ACT ** 15 RMDS 5538
ATT_ACT ** 20 DM_SR 4100
A_OV_ERROR ** 9 ER1 5327
A_OV_ERROR ** 9 RMER1 5559
BAD_SECTOR ** 15 RMER2 5652
BAD_WORD 1 0-35 CPU_PAR_TRAP_10 1088
BAD_WORD 1 0-35 CPU_PAR_TRAP_20 1585
BAD_WORD 4 0-35 KL_OR_KS_PAR_TRAP_10 998
BAI_INH ** 3 RH11_RMCS2 5255
BAT_FREE 35 9-17 MASSBUS_ERR_10 535
BCT_CAS_5 5 0-17 TM78_CAS_REGS 2548
BCT_CAS_5 5 18-35 TM78_CAS_REGS 2548
BIT_MAPPED_FLAG ** 12 DATA_ID 5737
BIT_PER_PAGE_FLAG 2 35 CONFIG_CHANGE_10 664
BIT_PER_PAGE_FLAG 12 35 NXM_MEMORY_SWEEP_10 1038
BIT_PER_PAGE_FLAG 12 35 SYSTEM_RELOAD_10 216
BIT_PER_PAGE_FLAG 14 35 OLD_CPU_NXM_ERR_10 286
BLOCKS_READ 8 0-35 MASSBUS_ERR_20 1389
BLOCKS_WRITE 9 0-35 MASSBUS_ERR_20 1391
BLOCK_ADDRESS ** 20-35 PBAR 5107
BLOCK_ADDRESS ** 20-35 SBAR 5091
BODY_FORMAT 0 18-20 HEADER 141
BOP ** 03 RPATH 2983
BOT_TU ** 02 TUSTAT 3767
BSENSE_BYTES 5 0-35 CSB_DX10 2403
BUGHLT_ADDRESS 5 0-35 SYSTEM_RELOAD_20 1308
BUGHLT_DATE_TIME 33 0-35 MONITOR_BUG_DATA_20 1349
BUG_MESSAGE 9 MAIN$Z MONITOR_BUG_DATA_20 1339
BUG_TYPE_FLAG 4 34-35 MONITOR_BUG_DATA_20 1328
BUS_ADDRESS ** 15-0 RH11_RMBA 5261
BUS_IN_LINES ** 9-0 RMMR2 5647
BUS_OUT_PARITY ** 5 DT_SB_0 4441
BYT1_CNT 9 28-35 TM78_SENSE_BYTES 2864
BYT2_CNT 9 20-27 TM78_SENSE_BYTES 2865
BYTE_CNT ** 7 - BYT1_CNT 3633
BYTE_CNT2 ** 7 - BYT2_CNT 3643
BYTE_COUNT 0 0-35 DECNET_PHASE_III 1804
BYTE_COUNT 3 0-31 MSCP_END_PACKET 1917
BYTE_COUNT 5 0-35 NET_HARDWARE_ERR 1761
CACHEABLE ** 7 PAGE_FAIL_WORD 4801
CACHE_DIR_PAR ** 28 APR_STATUS 4772
CACHE_DISABLED 4 5 CPU_PAR_TRAP_10 1096
CACHE_DISABLED 9 5 KL_OR_KS_PAR_TRAP_10 1008
CACHE_FAILED_FLAG 4 2 CPU_PAR_TRAP_10 1093
CACHE_FAILED_FLAG 7 2 CPU_PAR_TRAP_20 1594
CACHE_FAILED_FLAG 9 2 KL_OR_KS_PAR_TRAP_10 1005
CACHE_LOOK ** 18 PAGE_STATUS 4818
CACHE_OFF_COUNT 4 27-35 CPU_PAR_TRAP_10 1099
CACHE_OFF_COUNT 9 27-35 KL_OR_KS_PAR_TRAP_10 1011
CACHE_ON_COUNT 4 18-26 CPU_PAR_TRAP_10 1098
CACHE_ON_COUNT 9 18-26 KL_OR_KS_PAR_TRAP_10 1010
CACHE_USE_FLAG 4 3 CPU_PAR_TRAP_10 1094
CACHE_USE_FLAG 7 3 CPU_PAR_TRAP_20 1595
CACHE_USE_FLAG 9 3 KL_OR_KS_PAR_TRAP_10 1006
CAHE_LOAD ** 19 PAGE_STATUS 4819
CASPE ** 05 CASSTA 3486
CASSTA 7 20-27 TM78_SENSE_BYTES 2857
CAS_FAIL_CODE ** 15-10 DST_CAS_1 2653
CAS_INT_CODE ** 05-00 DST_CAS_1 2654
CBUSSTA 8 10-17 TM78_SENSE_BYTES 2858
CBUS_EP ** 8 PREP_REG 5160
CCW1 9 0-35 KLIPA 2197
CCW1 26 0-35 DX20_ERR_10 589
CCW1 28 0-35 MASSBUS_ERR_20 1419
CCW2 27 0-35 DX20_ERR_10 590
CCW2 29 0-35 MASSBUS_ERR_20 1420
CCW_FAIL_CNT 35 27-35 MASSBUS_ERR_10 538
CD_0 ** 0 ECCOR 3255
CD_1 ** 1 ECCOR 3257
CD_2 ** 2 ECCOR 3258
CD_3 ** 3 ECCOR 3259
CD_4 ** 4 ECCOR 3260
CD_5 ** 5 ECCOR 3261
CD_6 ** 6 ECCOR 3262
CD_7 ** 7 ECCOR 3263
CH0TIE 4 28-35 TM78_SENSE_BYTES 2844
CH1TIE 4 20-27 TM78_SENSE_BYTES 2845
CH2TIE 5 10-17 TM78_SENSE_BYTES 2846
CH3TIE 5 2-9 TM78_SENSE_BYTES 2847
CH4TIE 5 28-35 TM78_SENSE_BYTES 2848
CH5TIE 5 20-27 TM78_SENSE_BYTES 2849
CH6TIE 6 10-17 TM78_SENSE_BYTES 2850
CH7TIE 6 2-9 TM78_SENSE_BYTES 2851
CHANGE_REASON 2 0-11 CONFIG_CHANGE_10 651
CHANGE_REASON 4 0-35 CONFIG_CHANGE_20 1509
CHANNEL_CMD_WD 14 0-35 CSB_DX10 2419
CHANNEL_CMD_WD_2 15 0-35 CSB_DX10 2420
CHANNEL_ERRORS 9 0-35 PAR_SWEEP_DATA 4659
CHANNEL_NUMBER 3 9-11 CONFIG_CHANGE_20 1505
CHANNEL_REF ** 3 RDERA_STATUS 4840
CHAN_ADDR 2 0-17 DX20_ERR_10 551
CHAN_ADDR 4 5-11 MASSBUS_ERR_10 498
CHAN_ADDR 33 0-35 MASSBUS_ERR_20 1424
CHAN_CNTRL_STAT 0 0-35 CSB_TM02 2473
CHAN_ERR ** 26 CSR_REG 5206
CHAN_ERROR ** 22 CONI_STATUS 5036
CHAN_LOGO0 6 0-35 KLIPA 2194
CHAN_LOGO0 25 0-35 MASSBUS_ERR_20 1416
CHAN_LOGO1 7 0-35 KLIPA 2195
CHAN_LOGO1 26 0-35 MASSBUS_ERR_20 1417
CHAN_LOGO2 8 0-35 KLIPA 2196
CHAN_LOGO2 27 0-35 MASSBUS_ERR_20 1418
CHAN_LOGOUT_0 23 0-35 DX20_ERR_10 586
CHAN_LOGOUT_1 24 0-35 DX20_ERR_10 587
CHAN_LOGOUT_2 25 0-35 DX20_ERR_10 588
CHAN_NUMBER 33 33-35 MASSBUS_ERR_20 1426
CHAN_NXM ** 04 CHAN_LOGOUT_1 5061
CHAN_RDY ** 25 CONI_STATUS 5033
CHAN_TYPE 2 18-26 DX20_ERR_10 552
CHECK_TALLY 15 0-35 MONITOR_BUG_DATA_10 239
CHECK_TALLY 34 0-35 MONITOR_BUG_DATA_20 1350
CHKSM_ERRORS 6 24-35 OLD_DISK_STATS_10 844
CHKSM_ERRORS 7 24-35 DSCSBP 3989
CHKSM_ERRORS 7 24-35 MASSBUS_ERR_10 508
CHN_BLK_ID 3 11-12 USAGE_DATA_20 1472
CHN_DEV_PAR_COUNT 3 0-35 CHANNEL_ERROR_REPORT_10 387
CHN_LOGOUT_0 0 BODY CHN_LOGOUT_LIST 2328
CHN_LOGOUT_1 4 BODY CHN_LOGOUT_LIST 2329
CHN_LOGOUT_2 8 BODY CHN_LOGOUT_LIST 2330
CHN_LOGOUT_3 12 BODY CHN_LOGOUT_LIST 2331
CHN_LOGOUT_4 16 BODY CHN_LOGOUT_LIST 2332
CHN_LOGOUT_5 20 BODY CHN_LOGOUT_LIST 2333
CHN_LOGOUT_6 24 BODY CHN_LOGOUT_LIST 2334
CHN_LOGOUT_7 28 BODY CHN_LOGOUT_LIST 2335
CHN_LOGOUT_LIST 22 BODY KL_CPU_STATUS_10 1152
CHN_LOGOUT_LIST 22 BODY KL_CPU_STATUS_20 1670
CHN_MEM_PAR_COUNT 2 0-35 CHANNEL_ERROR_REPORT_10 386
CHN_NUMBER 4 0-35 USAGE_DATA_20 1477
CHN_PIA 3 8-10 USAGE_DATA_20 1471
CHN_STATUS_WORD 1 0-35 CHN_LOGOUT 2341
CHN_TYPE 3 13-17 USAGE_DATA_20 1473
CHPTIE 6 28-35 TM78_SENSE_BYTES 2852
CHVRSN 5 8-15 MSCP_ERROR_PACKET 2059
CINDBG 9 0-35 EXTRACTED_CRASH_INFO_10 310
CINDEL 23 0-35 EXTRACTED_CRASH_INFO_10 324
CINEPO 20 0-35 EXTRACTED_CRASH_INFO_10 321
CINEPP 21 0-35 EXTRACTED_CRASH_INFO_10 322
CINERC 22 0-35 EXTRACTED_CRASH_INFO_10 323
CINHSO 10 0-35 EXTRACTED_CRASH_INFO_10 311
CINLNM 6 0-35 EXTRACTED_CRASH_INFO_10 307
CINLST 64 0-35 EXTRACTED_CRASH_INFO_10 365
CINMMS 13 0-35 EXTRACTED_CRASH_INFO_10 314
CINMNA 72 0-35 EXTRACTED_CRASH_INFO_10 373
CINMPA 17 0-35 EXTRACTED_CRASH_INFO_10 318
CINMPC 16 0-35 EXTRACTED_CRASH_INFO_10 317
CINMPP 19 0-35 EXTRACTED_CRASH_INFO_10 320
CINMPW 18 0-35 EXTRACTED_CRASH_INFO_10 319
CINNDS 25 0-35 EXTRACTED_CRASH_INFO_10 326
CINNJA 71 0-35 EXTRACTED_CRASH_INFO_10 372
CINNJS 26 0-35 EXTRACTED_CRASH_INFO_10 327
CINNUL 65 0-35 EXTRACTED_CRASH_INFO_10 366
CINNWC 11 0-35 EXTRACTED_CRASH_INFO_10 312
CINOHT 66 0-35 EXTRACTED_CRASH_INFO_10 367
CINPAA 37 0-35 EXTRACTED_CRASH_INFO_10 338
CINPAC 38 0-35 EXTRACTED_CRASH_INFO_10 339
CINPAR 31 0-35 EXTRACTED_CRASH_INFO_10 332
CINPCS 41 0-35 EXTRACTED_CRASH_INFO_10 342
CINPLA 32 0-35 EXTRACTED_CRASH_INFO_10 333
CINPMR 33 0-35 EXTRACTED_CRASH_INFO_10 334
CINPOA 39 0-35 EXTRACTED_CRASH_INFO_10 340
CINPOC 40 0-35 EXTRACTED_CRASH_INFO_10 341
CINPOK 5 0-35 EXTRACTED_CRASH_INFO_10 306
CINPSC 35 0-35 EXTRACTED_CRASH_INFO_10 336
CINPTR 2 0-35 EXTRACTED_CRASH_INFO_10 303
CINPTS 34 0-35 EXTRACTED_CRASH_INFO_10 335
CINPUE 36 0-35 EXTRACTED_CRASH_INFO_10 337
CINRHC 61 0-35 EXTRACTED_CRASH_INFO_10 362
CINRHI 49 0-35 EXTRACTED_CRASH_INFO_10 350
CINRHO 45 0-35 EXTRACTED_CRASH_INFO_10 346
CINRHR 53 0-35 EXTRACTED_CRASH_INFO_10 354
CINRHX 57 0-35 EXTRACTED_CRASH_INFO_10 358
CINRLC 62 0-35 EXTRACTED_CRASH_INFO_10 363
CINRLI 50 0-35 EXTRACTED_CRASH_INFO_10 351
CINRLO 46 0-35 EXTRACTED_CRASH_INFO_10 347
CINRLR 54 0-35 EXTRACTED_CRASH_INFO_10 355
CINRLX 58 0-35 EXTRACTED_CRASH_INFO_10 359
CINRNC 60 0-35 EXTRACTED_CRASH_INFO_10 361
CINRNI 48 0-35 EXTRACTED_CRASH_INFO_10 349
CINRNO 44 0-35 EXTRACTED_CRASH_INFO_10 345
CINRNR 52 0-35 EXTRACTED_CRASH_INFO_10 353
CINRNX 56 0-35 EXTRACTED_CRASH_INFO_10 357
CINRSC 59 0-35 EXTRACTED_CRASH_INFO_10 360
CINRSI 47 0-35 EXTRACTED_CRASH_INFO_10 348
CINRSO 43 0-35 EXTRACTED_CRASH_INFO_10 344
CINRSP 42 0-35 EXTRACTED_CRASH_INFO_10 343
CINRSR 51 0-35 EXTRACTED_CRASH_INFO_10 352
CINRSX 55 0-35 EXTRACTED_CRASH_INFO_10 356
CINSEC 1 0-35 EXTRACTED_CRASH_INFO_10 302
CINSIZ 4 0-35 EXTRACTED_CRASH_INFO_10 305
CINSJN 27 0-35 EXTRACTED_CRASH_INFO_10 328
CINSNE 70 0-35 EXTRACTED_CRASH_INFO_10 371
CINSPC 24 0-35 EXTRACTED_CRASH_INFO_10 325
CINSPE 15 0-35 EXTRACTED_CRASH_INFO_10 316
CINSPN 28 0-35 EXTRACTED_CRASH_INFO_10 329
CINSPP 30 0-35 EXTRACTED_CRASH_INFO_10 331
CINSUU 29 0-35 EXTRACTED_CRASH_INFO_10 330
CINTIC 7 0-35 EXTRACTED_CRASH_INFO_10 308
CINTIM 3 0-35 EXTRACTED_CRASH_INFO_10 304
CINTJC 68 0-35 EXTRACTED_CRASH_INFO_10 369
CINTNE 69 0-35 EXTRACTED_CRASH_INFO_10 370
CINTPE 14 0-35 EXTRACTED_CRASH_INFO_10 315
CINTUC 67 0-35 EXTRACTED_CRASH_INFO_10 368
CINUNI 73 0-35 EXTRACTED_CRASH_INFO_10 374
CINUPT 12 0-35 EXTRACTED_CRASH_INFO_10 313
CINUPT 63 0-35 EXTRACTED_CRASH_INFO_10 364
CINVER 8 0-35 EXTRACTED_CRASH_INFO_10 309
CLEAR_DONE ** 32 CONO 5173
CLEAR_MBC ** 25 CONO 5166
CLEAR_PORT ** 18 CSR_REG 5198
CLEAR_RAE ** 24 CONO 5165
CLEAR_XFER ** 26 CONO 5167
CLOCK_STOPPED ** 02 RPATH 2982
CMDCOD 0 10-17 TM78_SENSE_BYTES 2826
CMDPE ** 05 PSTAT 3458
CMD_A16 ** 08 CMD_CAS_0 2624
CMD_A17 ** 09 CMD_CAS_0 2623
CMD_CAS_0 0 0-17 TM78_CAS_REGS 2543
CMD_CAS_0 0 18-35 TM78_CAS_REGS 2543
CMD_CODE ** 7 - CMDCOD 2891
CMD_DONE ** 32 CONI_STATUS 5026
CMD_DR_AVAIL ** 11 CMD_CAS_0 2615
CMD_FUNC_CODE ** 05-01 CMD_CAS_0 2644
CMD_GO_BIT ** 00 CMD_CAS_0 2645
CMD_INT_EN ** 06 CMD_CAS_0 2634
CMD_MCPE ** 13 CMD_CAS_0 2604
CMD_PE ** 7 MIAB_STAT 3827
CMD_PORTSEL ** 10 CMD_CAS_0 2618
CMD_QUEUE_AVAIL ** 27 CSR_REG 5207
CMD_READY_DT ** 07 CMD_CAS_0 2627
CMD_REF_NUM 0 0-31 MSCP_END_PACKET 1907
CMD_REF_NUM 0 0-31 MSCP_ERROR_PACKET 2040
CMD_REF_NUM_A 0 0-35 MSCP_END_PACKET 1906
CMD_REF_NUM_A 0 0-35 MSCP_ERROR_PACKET 2039
CMD_REJECT ** 7 DT_SB_0 4439
CMD_SPL_COND ** 15 CMD_CAS_0 2592
CMD_TRAN_ERR ** 14 CMD_CAS_0 2597
CNTLR_CLASS 4 24-31 MSCP_ERROR_PACKET 2057
CNTLR_DEV_NUM_H 4 0-15 MSCP_ERROR_PACKET 2055
CNTLR_DEV_NUM_L 3 0-31 MSCP_ERROR_PACKET 2054
CNTLR_ID_H 4 0-31 MSCP_ERROR_PACKET 2053
CNTLR_ID_L 3 0-31 MSCP_ERROR_PACKET 2052
CNTLR_MODEL 4 16-23 MSCP_ERROR_PACKET 2056
CNTRLLER_REG 4 0-35 TAPE_ERR_10 724
CNTRLR_FLAGS_1 3 16-23 MSCP_END_PACKET 1942
CNTRLR_FLAGS_2 3 24-31 MSCP_END_PACKET 1943
CNTRLR_TMOUT_1 4 0-7 MSCP_END_PACKET 1949
CNTRLR_TMOUT_2 4 8-15 MSCP_END_PACKET 1950
CNT_CAS_2 2 0-17 TM78_CAS_REGS 2545
CNT_CAS_2 2 18-35 TM78_CAS_REGS 2545
CNT_CMD_ADR ** 01-00 CNT_CAS_2 2708
CNT_FORMAT ** 14-12 CNT_CAS_2 2667
CNT_REC_CNT ** 07-02 CNT_CAS_2 2688
CNT_SER ** 15 CNT_CAS_2 2659
CNT_SKIP_CNT ** 11-08 CNT_CAS_2 2681
CODED_FLAG ** 7 DATA_TYPE 5745
COMMAND_CODE 0 12-17 CONFIG_CHANGE_20 1501
COMMAND_CODE 2 12-17 CONFIG_CHANGE_10 652
COMND_BRNCH ** 12 RMMR2 5644
COMPATIBILITY_MODE ** 3 DT_SB_2 4469
COMP_ERR ** 21 DM_SR 4127
CONFIG_RPT_FLAG 0 4 FE_SUB 4521
CONI 2 0-35 CSB_TM78 2516
CONI 10 0-35 CSB_DX10 2408
CONI_AT_ERR 14 0-35 TAPE_ERR_10 768
CONI_DTE_LIST 18 0-35 KL_CPU_STATUS_10 1151
CONI_DTE_LIST 18 0-35 KL_CPU_STATUS_20 1669
CONI_FINAL 6 0-35 DX20_ERR_10 566
CONI_FINAL 6 0-35 MASSBUS_ERR_10 505
CONI_FINAL 6 0-35 MASSBUS_ERR_20 1387
CONI_INITIAL 0 0-35 CSB_TM02 2469
CONI_INITIAL 2 0-35 CSB_TM78 2515
CONI_INITIAL 5 0-35 DX20_ERR_10 565
CONI_INITIAL 5 0-35 MASSBUS_ERR_10 502
CONI_INITIAL 5 0-35 MASSBUS_ERR_20 1385
CONI_RH20_LIST 10 0-35 KL_CPU_STATUS_10 1150
CONI_RH20_LIST 10 0-35 KL_CPU_STATUS_20 1668
CONI_RP10 5 0-35 OLD_DISK_ERR_10 424
CONO_RESET_CLP ** 28 CONO 5169
CONSOLE ** 0 SINK_FLAGS 5714
CONT ** 6 RMMR1 5582
CONTEN ** 07 CASSTA 3491
CONTENTS_AND 6 0-35 PAR_SWEEP_DATA 4656
CONTENTS_AND 7 0-35 CPU_PAR_INT_20 1637
CONTENTS_OR 8 0-35 CPU_PAR_INT_20 1638
CONTENTS_OR 8 0-35 PAR_SWEEP_DATA 4658
CONTINUE_COUNT 3 0-35 OLD_CPU_MEM_PAR_ERR_10 254
CONTROLLER_NUMBER 0 18-35 SBDIAG_LIST 4698
CONTROLLER_NUMBER 3 12-14 CONFIG_CHANGE_20 1506
CONTROLLER_NUMBER 16 27-29 OLD_DISK_ERR_10 446
CONTROLLER_TYPE 4 12-14 TAPE_ERR_10 730
CONTROLLER_TYPE 16 21-26 OLD_DISK_ERR_10 443
CONTR_TAG_A ** 13 RMMR2 5643
CONTR_TAG_B ** 11 RMMR2 5645
CONT_CLEAR ** 5 RH11_RMCS2 5253
COPIES 11 24-31 MSCP_END_PACKET 2009
CORRECTABLE ** 6 DT_SB_2 4466
CORRECTED_DATA_P ** 07 RPSTA 3202
COUNTER_TYPE ** 11-0 DATA_ID 5739
COUNTER_WIDTH ** 14-13 DATA_ID 5733
CPU_NAME 0 0-35 CPU_PAR_INT_10 1114
CPU_NAME 0 0-35 KL_OR_KS_PAR_TRAP_10 994
CPU_NAME 0 0-35 KL_PAR_NXM_INT_10 954
CPU_NAME 0 0-35 NXM_MEMORY_SWEEP_10 1025
CPU_NAME 0 0-35 OLD_CPU_MEM_PAR_ERR_10 251
CPU_NAME 0 0-35 OLD_CPU_NXM_ERR_10 270
CPU_NAME 0 0-35 PAR_MEMORY_SWEEP_10 1046
CPU_SERIAL_NUMBER 1 0-35 MONITOR_BUG_DATA_20 1322
CPU_SERIAL_NUMBER 3 0-35 SYSTEM_RELOAD_20 1304
CPU_SERIAL_NUMBER 7 0-35 MONITOR_BUG_DATA_10 230
CPU_SERIAL_NUMBER 9 0-35 SYSTEM_RELOAD_10 209
CRAM_ADDR 3 24-35 KLIPA 2191
CRAM_DATA_L 4 6-35 KLIPA 2192
CRAM_DATA_R 5 6-35 KLIPA 2193
CRAM_PAR ** 6 CSR_REG 5190
CRASH_EXTRACT 0 16 HEADER 139
CRASH_STR 0 0-35 EXTRACTED_CRASH_INFO_10 301
CRCE ** 07 ECCSTA 3280
CRCWRD 3 20-27 TM78_SENSE_BYTES 2841
CRC_0 ** 0 CRCWRD 3240
CRC_1 ** 1 CRCWRD 3241
CRC_2 ** 2 CRCWRD 3242
CRC_3 ** 3 CRCWRD 3243
CRC_4 ** 4 CRCWRD 3244
CRC_5 ** 5 CRCWRD 3245
CRC_6 ** 6 CRCWRD 3246
CRC_7 ** 7 CRCWRD 3247
CRC_OUT ** 9 RMMR1 5579
CRC_WMC_DRBUS ** 03 WMCSTA 3547
CSB_DX10_AT_END 9 HEAD TAPE_ERR_10 759
CSB_DX10_AT_ERR 8 HEAD TAPE_ERR_10 754
CSB_TM02_AT_END 9 HEAD TAPE_ERR_10 760
CSB_TM02_AT_ERR 8 HEAD TAPE_ERR_10 755
CSB_TM10_AT_END 9 HEAD TAPE_ERR_10 757
CSB_TM10_AT_ERR 8 HEAD TAPE_ERR_10 752
CSB_TM78_AT_END 9 HEAD TAPE_ERR_10 758
CSB_TM78_AT_ERR 8 HEAD TAPE_ERR_10 753
CSENSE_BYTES 6 0-35 CSB_DX10 2404
CSR_DSR_FLAG ** 33 DX10_CSR 2455
CSR_IGN_LEN_ERR ** 31 DX10_CSR 2453
CSR_LEN_ERR ** 30 DX10_CSR 2452
CSR_OPI ** 35 DX10_CSR 2457
CSR_PAR_ERR ** 29 DX10_CSR 2451
CSR_PRG_STAT ** 24 DX10_CSR 2447
CSR_REG 0 0-35 KLIPA 2185
CSR_SBYTE_RD_ERR ** 34 DX10_CSR 2456
CSR_SEL_ERR ** 27 DX10_CSR 2449
CSR_SEQ_ERR ** 28 DX10_CSR 2450
CSR_TYPE ** 25-26 DX10_CSR 2448
CSR_UNUSED ** 32 DX10_CSR 2454
CSVRSN 5 0-7 MSCP_ERROR_PACKET 2058
CS_PTR 3 0-35 KS_HALT_STATUS_20 1572
CTRL_ADDR 4 5-11 DX20_ERR_10 561
CTRL_NUMBER 4 15-17 DX20_ERR_10 563
CTRL_NUMBER 4 15-17 MASSBUS_ERR_10 500
CTRL_TYPE 4 12-14 DX20_ERR_10 562
CURRENT_BLOCK ** 6-8 PAGE_DATAI 4783
CYLINDER 23 0-35 MASSBUS_ERR_20 1412
CYLINDER_1 8 16-23 MSCP_ERROR_PACKET 2122
CYLINDER_2 8 24-31 MSCP_ERROR_PACKET 2123
CYL_SIZ_1 10 0-7 MSCP_END_PACKET 2001
CYL_SIZ_2 10 8-10 MSCP_END_PACKET 2002
C_SK_UNSF ** 1 ER2 5458
C_SW_UNSF ** 3 ER2 5454
DAC 2 0-35 CSB_DX10 2384
DAEMON_VERSION 0 0-35 AVAIL_BOF 2295
DAEMON_VERSION 0 0-35 AVAIL_EOF 2300
DAEMON_WAKEUP 3 0-35 AVAIL_RELOAD 2287
DAE_VERSION 0 0-35 DAEMON_STARTED_10 405
DAG 18 0-35 CSB_DX10 2423
DATA ** 15-0 RH11_RMDB 5266
DATAGRAM_DSCRD_CNT 6 0-35 KLIPA_COUNTERS 1862
DATA_CHECK ** 15 ER1 5321
DATA_CHECK ** 15 RMER1 5553
DATA_ECC ** 7-0 RDATA 3232
DATA_ENV ** 7 MR 5344
DATA_ERROR ** 3 RMER2 5659
DATA_LATE ** 15 RH11_RMCS2 5243
DATA_LENGTH ** 3-0 DATA_TYPE 5755
DATA_LOOP ** 27 DCR 5144
DATA_P ** 06 RPSTA 3201
DATA_PE ** 18 CONI_STATUS 5040
DATA_POINTER 5 0-35 SOFTWARE_EVENT_10 620
DATA_READY ** 04 RPATH 2986
DATE_TIME 1 0-35 CONFIG_CHANGE_10 649
DAT_ERR 4 2 MASSBUS_ERR_20 1378
DBUSSTA 8 2-8 TM78_SENSE_BYTES 2859
DC_FAULT ** 7 RMER2 5658
DC_LOW ** 5 ER3 5482
DDR_A 11 10-17 TM78_SENSE_BYTES 2870
DDR_B 11 2-9 TM78_SENSE_BYTES 2871
DEBPTR 0 0-35 SOFTWARE_REQ_DATA_10 685
DEL_SCR ** 29 CONO 5170
DEPOSIT_PROTECT 5 0-35 DTE_BLOCK 4021
DEPOSIT_RELOC 6 0-35 DTE_BLOCK 4022
DESIGNATED_PORT 9 0-35 KLIPA_COUNTERS 1865
DETECTING_DTE 6 0-35 FE_DATA 4511
DEVICE_DATA 2 0-35 DEVICE_STATUS_10 1175
DEVICE_NAME 0 0-35 CHANNEL_ERROR_REPORT_10 384
DEVICE_NAME 0 0-35 OLD_TAPE_STATS_10 865
DEVICE_NAME 2 0-35 CONFIG_CHANGE_20 1503
DEVICE_NAME_1 0 0-35 CONFIG_CHANGE_10 641
DEVICE_NAME_2 1 0-35 CONFIG_CHANGE_10 646
DEV_ANSWER 3 0-35 ERROR_LOG 4488
DEV_BLK_ID 3 29-30 USAGE_DATA_20 1475
DEV_CODE 4 18-35 FE_DATA 4505
DEV_ERR 4 4 MASSBUS_ERR_20 1380
DEV_HUNG_FLAG 0 6 FE_SUB 4523
DEV_NAM 0 0-35 DX20_ERR_10 549
DEV_NAM 0 0-35 MASSBUS_ERR_10 489
DEV_NAM 0 0-35 MASSBUS_ERR_20 1365
DEV_NAM 0 0-35 TAPE_ERR_10 717
DEV_NAM 1 0-35 DSCSBP 3973
DEV_NAME 0 0-35 MASSBUS_ERR_20 1366
DEV_NUMBER 4 14-17 FE_DATA 4504
DEV_PIA 3 26-28 USAGE_DATA_20 1474
DEV_SEL_CODE ** 15-17 PREP_REG 5159
DEV_TYPE 2 27-35 DX20_ERR_10 553
DEV_TYPE 3 31-35 USAGE_DATA_20 1476
DG1_CAS_3 3 0-17 TM78_CAS_REGS 2546
DG1_CAS_3 3 18-35 TM78_CAS_REGS 2546
DG2_CAS_11 9 0-17 TM78_CAS_REGS 2573
DG2_CAS_11 9 18-35 TM78_CAS_REGS 2573
DG3_CAS_12 10 0-17 TM78_CAS_REGS 2574
DG3_CAS_12 10 18-35 TM78_CAS_REGS 2574
DH11_DEV_NUMBER 0 24-27 FE_SUB 4536
DH11_LINE_NUMBER 1 12-15 FE_SUB 4537
DH_DATA_OVERUN 1 17 FE_SUB 4542
DH_FRAMING_ERR 1 18 FE_SUB 4543
DH_PARITY_ERR 1 19 FE_SUB 4544
DH_VALID_DATA 1 16 FE_SUB 4541
DIAG_CSR_CHNG ** 2 CSR_REG 5186
DIAG_GEN_EBUS_PE ** 20 CSR_REG 5200
DIAG_MODE ** 0 MR 5351
DIAG_MODE ** 0 RMMR1 5588
DIAG_READ_DATA ** 18-35 WR 5137
DIAG_RQST_CSR ** 1 CSR_REG 5185
DIAG_SEL_LAR ** 21 CSR_REG 5201
DIAG_SINGLE_CYC ** 22 CSR_REG 5202
DIAG_TEST_EBUF ** 19 CSR_REG 5199
DIAG_WRITE_DATA ** 18-35 RR 5130
DIRECTORY 1 0-35 FE_DATA 4500
DISABLE ** 30 CSR_REG 5210
DISABLE_COMP ** 12 CSR_REG 5194
DIS_RAE ** 9 PREP_REG 5158
DIS_XFER ** 19 PTCR 5115
DIS_XFER ** 19 STCR 5099
DLECN0 3 0-35 DL_HARDWARE_ERR_10 917
DLECN1 4 0-35 DL_HARDWARE_ERR_10 918
DLECN2 5 0-35 DL_HARDWARE_ERR_10 919
DLECN3 6 0-35 DL_HARDWARE_ERR_10 920
DLECNI 1 0-35 DL_HARDWARE_ERR_10 915
DLEDT1 7 0-35 DL_HARDWARE_ERR_10 921
DLEDTI 2 0-35 DL_HARDWARE_ERR_10 916
DLEPGM 8 0-35 DL_HARDWARE_ERR_10 922
DLEPRT 0 0-35 DL_HARDWARE_ERR_10 914
DLESTS 9 0-35 DL_HARDWARE_ERR_10 923
DLSCAN_DEVICE 0 17-22 FE_SUB 4529
DM11_DEV_NUMBER 0 26-28 FE_SUB 4535
DM_AA 8 0-35 DX20_MASSBUS_REG 4053
DM_AA_ERR 8 18-35 DX20_MASSBUS_REG 4054
DM_AL 16 0-35 DX20_MASSBUS_REG 4078
DM_AL_ERR 16 18-35 DX20_MASSBUS_REG 4079
DM_AS 4 0-35 DX20_MASSBUS_REG 4043
DM_AS_ERR 4 18-35 DX20_MASSBUS_REG 4044
DM_AY 11 0-35 DX20_MASSBUS_REG 4067
DM_AY_ERR 11 18-35 DX20_MASSBUS_REG 4068
DM_BC 5 0-35 DX20_MASSBUS_REG 4047
DM_BC_ERR 5 18-35 DX20_MASSBUS_REG 4048
DM_BW 19 0-35 DX20_MASSBUS_REG 4084
DM_BW_ERR 19 18-35 DX20_MASSBUS_REG 4085
DM_CR 0 0-35 DX20_MASSBUS_REG 4035
DM_CR_ERR 0 18-35 DX20_MASSBUS_REG 4036
DM_CY 11 0-35 DX20_MASSBUS_REG 4065
DM_CY_ERR 11 18-35 DX20_MASSBUS_REG 4066
DM_DD 10 0-35 DX20_MASSBUS_REG 4061
DM_DD_ERR 10 18-35 DX20_MASSBUS_REG 4062
DM_DN 8 0-35 DX20_MASSBUS_REG 4055
DM_DN_ERR 8 18-35 DX20_MASSBUS_REG 4056
DM_DT 6 0-35 DX20_MASSBUS_REG 4049
DM_DT_ERR 6 18-35 DX20_MASSBUS_REG 4050
DM_E0 12 0-35 DX20_MASSBUS_REG 4069
DM_E0_ERR 12 18-35 DX20_MASSBUS_REG 4070
DM_E1 13 0-35 DX20_MASSBUS_REG 4071
DM_E1_ERR 13 18-35 DX20_MASSBUS_REG 4072
DM_ER 2 0-35 DX20_MASSBUS_REG 4039
DM_ER_ERR 2 18-35 DX20_MASSBUS_REG 4040
DM_ES 9 0-35 DX20_MASSBUS_REG 4059
DM_ES_ERR 9 18-35 DX20_MASSBUS_REG 4060
DM_FL 9 0-35 DX20_MASSBUS_REG 4057
DM_FL_ERR 9 18-35 DX20_MASSBUS_REG 4058
DM_FP 18 0-35 DX20_MASSBUS_REG 4082
DM_FP_ERR 18 18-35 DX20_MASSBUS_REG 4083
DM_IB 20 0-35 DX20_MASSBUS_REG 4086
DM_IB_ERR 20 18-35 DX20_MASSBUS_REG 4087
DM_IR 14 0-35 DX20_MASSBUS_REG 4074
DM_IR_ERR 14 18-35 DX20_MASSBUS_REG 4075
DM_MA 21 0-35 DX20_MASSBUS_REG 4088
DM_MA_ERR 21 18-35 DX20_MASSBUS_REG 4089
DM_MR 3 0-35 DX20_MASSBUS_REG 4041
DM_MR_ERR 3 18-35 DX20_MASSBUS_REG 4042
DM_PC 15 0-35 DX20_MASSBUS_REG 4076
DM_PC_ERR 15 18-35 DX20_MASSBUS_REG 4077
DM_SB 5 0-35 DX20_MASSBUS_REG 4045
DM_SB_ERR 5 18-35 DX20_MASSBUS_REG 4046
DM_SD 17 0-35 DX20_MASSBUS_REG 4080
DM_SD_ERR 17 18-35 DX20_MASSBUS_REG 4081
DM_SI 7 0-35 DX20_MASSBUS_REG 4051
DM_SI_ERR 7 18-35 DX20_MASSBUS_REG 4052
DM_SR 1 0-35 DX20_MASSBUS_REG 4037
DM_SR_ERR 1 18-35 DX20_MASSBUS_REG 4038
DM_TE 10 0-35 DX20_MASSBUS_REG 4063
DM_TE_ERR 10 18-35 DX20_MASSBUS_REG 4064
DRADR ** 2-0 CASSTA 3480
DRIVE_AVAIL ** 12 RMCS1 5527
DRIVE_EXC ** 19 CONI_STATUS 5039
DRIVE_PRES ** 8 DS 5308
DRIVE_PRES ** 8 RMDS 5545
DRIVE_READY ** 7 DS 5309
DRIVE_READY ** 7 RMDS 5546
DRIVE_REQ ** 11 DT 5379
DRIVE_REQ ** 11 RMDT 5612
DRIVE_TYPE ** 8-0 DT 5381
DRIVE_TYPE ** 8-0 RMDT 5613
DRMBPE ** 06 WMCERR 3723
DRRDPE ** 03 WMCERR 3716
DR_NO_WR_CLK ** 07 WMCERR 3726
DR_REG 17 0-35 CSB_DX10 2422
DR_RE_ERROR ** 23 CONI_STATUS 5035
DR_T_ERROR ** 12 ER1 5324
DR_T_ERROR ** 12 RMER1 5556
DSCBPT 0 0-35 DSCSBP 3971
DSCBRC 8 0-35 DSCSBP 3990
DSCBWC 9 0-35 DSCSBP 3991
DSCDRC 10 0-35 DSCSBP 3992
DSCDWC 11 0-35 DSCSBP 3993
DSCHCT 3 0-35 DSCSBP 3975
DSCHID 2 0-35 DSCSBP 3974
DSCICT 14 0-35 DSCSBP 3996
DSCMCT 7 0-35 DSCSBP 3986
DSCMRC 12 0-35 DSCSBP 3994
DSCMSC 16 0-35 DSCSBP 3998
DSCMWC 13 0-35 DSCSBP 3995
DSCOCT 15 0-35 DSCSBP 3997
DSCPCT 5 0-35 DSCSBP 3979
DSCSBP 0 MAIN DISK_STATS_10 903
DSCSCT 4 0-35 DSCSBP 3977
DSCUSC 17 0-35 DSCSBP 3999
DSENSE_BYTES 7 0-35 CSB_DX10 2405
DSE_MIA ** 00 MIAA_STAT 3785
DSE_TUX ** 00 TUX 3902
DSK_RETRY 8 24-31 MSCP_ERROR_PACKET 2086
DSR_ATTN ** 28 DX10_DSR 2435
DSR_BUSY ** 31 DX10_DSR 2438
DSR_CHAN_END ** 32 DX10_DSR 2439
DSR_CU_END ** 30 DX10_DSR 2437
DSR_DEV_END ** 33 DX10_DSR 2440
DSR_STAT_MOD ** 29 DX10_DSR 2436
DSR_UNIT_CHK ** 34 DX10_DSR 2441
DSR_UNIT_EXCEPT ** 35 DX10_DSR 2442
DST_CAS_1 1 0-17 TM78_CAS_REGS 2544
DST_CAS_1 1 18-35 TM78_CAS_REGS 2544
DTE_BLOCK_0 0 BODY DTE_CONTROL_BLOCK 4008
DTE_BLOCK_1 8 BODY DTE_CONTROL_BLOCK 4009
DTE_BLOCK_2 16 BODY DTE_CONTROL_BLOCK 4010
DTE_BLOCK_3 24 BODY DTE_CONTROL_BLOCK 4011
DTE_CONTROL_BLOCK 54 BODY KL_CPU_STATUS_10 1153
DTE_CONTROL_BLOCK 54 BODY KL_CPU_STATUS_20 1671
DTE_INT_INSTRUCTION 2 0-35 DTE_BLOCK 4018
DTR_CAS_6 6 0-17 TM78_CAS_REGS 2570
DTR_CAS_6 6 18-35 TM78_CAS_REGS 2570
DT_CB0 13 0-35 DX20_DEVICE_REG 4419
DT_CB1 14 0-35 DX20_DEVICE_REG 4420
DT_DP0 15 0-35 DX20_DEVICE_REG 4421
DT_DP1 16 0-35 DX20_DEVICE_REG 4422
DT_DP2 17 0-35 DX20_DEVICE_REG 4423
DT_DP3 18 0-35 DX20_DEVICE_REG 4424
DT_LAS 19 0-35 DX20_DEVICE_REG 4425
DT_MCV 6 0-35 DX20_DEVICE_REG 4412
DT_MRA 7 0-35 DX20_DEVICE_REG 4413
DT_MRB 8 0-35 DX20_DEVICE_REG 4414
DT_MRC 9 0-35 DX20_DEVICE_REG 4415
DT_MRD 10 0-35 DX20_DEVICE_REG 4416
DT_MRE 11 0-35 DX20_DEVICE_REG 4417
DT_MRF 12 0-35 DX20_DEVICE_REG 4418
DT_SBA 0 0-35 DX20_DEVICE_REG 4386
DT_SBB 1 0-35 DX20_DEVICE_REG 4391
DT_SBC 2 0-35 DX20_DEVICE_REG 4398
DT_SBD 3 0-35 DX20_DEVICE_REG 4399
DT_SBE 4 0-35 DX20_DEVICE_REG 4400
DT_SBF 5 0-35 DX20_DEVICE_REG 4406
DT_SB_0 0 2-9 DX20_DEVICE_REG 4387
DT_SB_1 0 10-17 DX20_DEVICE_REG 4388
DT_SB_16 4 2-9 DX20_DEVICE_REG 4401
DT_SB_17 4 10-17 DX20_DEVICE_REG 4402
DT_SB_18 4 20-27 DX20_DEVICE_REG 4403
DT_SB_19 4 28-35 DX20_DEVICE_REG 4405
DT_SB_2 0 20-27 DX20_DEVICE_REG 4389
DT_SB_20 5 2-9 DX20_DEVICE_REG 4407
DT_SB_21 5 10-17 DX20_DEVICE_REG 4408
DT_SB_22 5 20-27 DX20_DEVICE_REG 4409
DT_SB_23 5 28-35 DX20_DEVICE_REG 4410
DT_SB_3 0 28-35 DX20_DEVICE_REG 4390
DT_SB_4 1 2-9 DX20_DEVICE_REG 4392
DT_SB_5 1 10-17 DX20_DEVICE_REG 4393
DT_SB_6 1 20-27 DX20_DEVICE_REG 4394
DT_SB_7 1 28-35 DX20_DEVICE_REG 4395
DX10_BC_OF 12 0 CSB_DX10 2415
DX10_BYTE_CTR 12 1-13 CSB_DX10 2416
DX10_CPC 12 14-35 CSB_DX10 2417
DX10_CSR 11 8-19 CSB_DX10 2411
DX10_DAR 11 28-35 CSB_DX10 2413
DX10_DSR 11 0-7 CSB_DX10 2410
DX10_LAST_REC 13 12-35 CSB_DX10 2418
DX10_MEM_PAR ** 27 CONI 2429
DX10_MP_ERR ** 26 CONI 2428
DX10_NXM ** 28 CONI 2430
DX10_SEQ_ERR 11 22-27 CSB_DX10 2412
DX20_DEVICE_REG 36 MAIN DX20_ERR_10 601
DX20_DEVICE_REG 41 MAIN MASSBUS_ERR_20 1443
DX20_MASSBUS_REG 35 MAIN DX20_ERR_10 599
DX20_MASSBUS_REG 40 MAIN MASSBUS_ERR_20 1441
DX20_RESET ** 1 DM_MR 4346
DX_CBUF_PE ** 32 DM_ER 4196
DX_DBUF_PE ** 31 DM_ER 4202
DX_ERR_CLASS ** 24-27 DM_ER 4240
DX_ILL_FUNCT ** 35 DM_ER 4171
DX_ILL_REG ** 34 DM_ER 4181
DX_MP_ERROR ** 28 DM_ER 4232
DX_MP_STOP ** 29 DM_ER 4224
DX_REG_MOD ** 33 DM_ER 4185
DX_SUB_CLASS ** 20-23 DM_ER 4242
DX_UBUS_PE ** 30 DM_ER 4208
DX_VER 39 18-35 MASSBUS_ERR_20 1440
EBUS_PARITY_ERR ** 24 CSR_REG 5204
ECCOR 4 10-17 TM78_SENSE_BYTES 2842
ECCSTA 4 2-9 TM78_SENSE_BYTES 2843
ECC_CORR 4 1 MASSBUS_ERR_20 1377
ECC_ENV ** 6 MR 5345
ECC_ERROR ** 6 ER1 5330
ECC_ERROR ** 6 RMER1 5562
ECC_ERR_LOC ** 12-0 ECC1 5507
ECC_ERR_MASK ** 10-0 ECC2 5512
ECC_INH ** 11 OF 5399
ECC_INH ** 11 RMOF 5629
ECC_PATTERN ** 10-0 RMECC2 5669
ECC_POSITION ** 12-0 RMECC1 5664
ECC_WMC_DRBUS ** 04 WMCSTA 3549
ECODE_2 ** 7 - ERR2_CNT 3686
ENABLE ** 31 CSR_REG 5211
ENABLED_COUNT 10 0-35 OLD_CPU_NXM_ERR_10 280
ENABLE_24_31 ** 6-13 APR_STATUS 4765
ENABLE_COMP ** 13 CSR_REG 5195
ENAON 14 20-27 TM78_SENSE_BYTES 2885
ENB_ECC ** 4 RMMR1 5584
ENB_SERCH ** 11 RMMR1 5577
ENDCODE 2 0-7 MSCP_END_PACKET 1912
END_0 ** 0 REND 3180
END_1 ** 1 REND 3181
END_2 ** 2 REND 3182
END_3 ** 3 REND 3183
END_4 ** 4 REND 3184
END_5 ** 5 REND 3185
END_6 ** 6 REND 3186
END_7 ** 7 REND 3187
END_BLOCK ** 13 RMMR1 5575
END_FLAGS 2 8-15 MSCP_END_PACKET 1913
END_OF_CYLINDER ** 5 DT_SB_1 4454
END_P ** 04 RPSTA 3199
ENTRY_DATE_TIME 1 0-35 HEADER 148
ENTRY_LENGTH 0 27-35 HEADER 147
ENTRY_TYPE 0 0-8 HEADER 136
ENVIRONMENTAL_DATA ** 4 DT_SB_2 4468
EOT_DET ** 04 TUDIAG 3866
EOT_TU ** 01 TUSTAT 3766
EPT_PAGE ** 23-35 PAGE_STATUS 4822
EQUIPMENT_CHECK ** 4 DT_SB_0 4442
ER$DHG 1 12 FE_RELOAD_20 1551
ER$ENF 1 13 FE_RELOAD_20 1552
ER$OPE 1 14 FE_RELOAD_20 1553
ER$OUF 1 15 FE_RELOAD_20 1554
ER$TT1 1 16 FE_RELOAD_20 1555
ERR ** 05 WMCERR 3721
ERR1_CNT 10 28-35 TM78_SENSE_BYTES 2868
ERR2_CNT 10 20-27 TM78_SENSE_BYTES 2869
ERROR ** 14 DS 5302
ERROR ** 14 RMDS 5539
ERROR_ADDRESS 5 0-35 MONITOR_BUG_DATA_20 1334
ERROR_LOG 0 BODY SYS_ERROR_LOG_10 673
ERROR_LOG 0 BODY SYS_ERROR_LOG_20 1518
ERR_CODE ** 7-0 ERR1_CNT 3667
ERR_LOCATION 3 0-35 DX20_ERR_10 554
ERR_LOCATION 3 0-35 MASSBUS_ERR_20 1372
ERR_RECORD 22 0-35 DX20_ERR_10 585
ERR_RECORD 24 0-35 MASSBUS_ERR_20 1415
ESENSE_BYTES 8 0-35 CSB_DX10 2406
EVENT_CLASS ** 14-6 EVENT_CODE 5720
EVENT_CODE 0 0-35 SOFTWARE_EVENT_10 612
EVENT_TYPE ** 4-0 EVENT_CODE 5721
EVEN_PAR_CHK ** 29 DCR 5146
EXAMINE_PROTECT 4 0-35 DTE_BLOCK 4020
EXPECTED_TERMINATION 12 0-35 CHANNEL_ERROR_REPORT_10 396
EXT_FIELD ** 5-4 LA 5387
FAIL_CODE ** 7 - FALCOD 2906
FALCOD 0 28-35 TM78_SENSE_BYTES 2828
FEATURE_REG 3 0-35 CSB_DX10 2385
FERFNM 2 MAIN$Z FE_RELOAD_10 807
FERNUM 0 0-35 FE_RELOAD_10 787
FERSIZ 3 0-35 FE_RELOAD_10 808
FERSTS 1 0-35 FE_RELOAD_10 790
FE_DATA 0 BODY FE_DEVICE_ERR_10 778
FE_DATA 0 BODY FE_DEVICE_ERR_20 1527
FE_LENGTH 7 0-35 FE_DATA 4512
FE_OFFSET 5 18-35 FE_DATA 4509
FE_SUB 5 MAIN FE_DATA 4508
FE_VERSION 2 0-35 FE_DATA 4501
FIELD_COUNT ** 5-0 DATA_TYPE 5759
FIELD_TYPE ** 6 DATA_TYPE 5748
FILE ** 1 SINK_FLAGS 5713
FILE_IN_ERROR 2 0-35 TAPE_ERR_10 721
FILE_IN_ERROR 3 0-17 DX20_ERR_10 556
FILE_IN_ERROR 3 0-17 MASSBUS_ERR_20 1373
FILE_NAME 3 MAIN$Z NODE_DOWN_LINE_DUMP 1743
FILE_NAME 3 MAIN$Z NODE_DOWN_LINE_LOAD 1708
FILE_NAME 10 0-35 DX20_ERR_10 569
FILE_NAME 10 0-35 MASSBUS_ERR_10 514
FILE_NAME 10 0-35 MASSBUS_ERR_20 1393
FILE_NAME_EXT 11 18-35 MASSBUS_ERR_10 516
FILE_POSITION 21 0-35 DX20_ERR_10 584
FILE_POSITION 23 0-35 MASSBUS_ERR_20 1413
FILE_PROTECT ** 2 DT_SB_1 4457
FINAL_ERR_STATE 4 0-35 DX20_ERR_10 558
FINAL_ERR_STATE 4 0-35 MASSBUS_ERR_10 493
FINAL_ERR_STATE 4 0-35 MASSBUS_ERR_20 1375
FINAL_ERR_STATUS 7 0-35 TAPE_ERR_10 750
FIRST_ADDRESS 3 0-35 NXM_MEMORY_SWEEP_10 1028
FIRST_ADDRESS 4 0-35 PAR_MEMORY_SWEEP_10 1050
FIRST_ADDRESS 5 0-35 OLD_CPU_NXM_ERR_10 275
FIRST_ADDRESS 6 0-35 CPU_PAR_INT_10 1120
FIRST_ADDRESS 6 0-35 OLD_CPU_MEM_PAR_ERR_10 257
FIRST_BAD_BLOCK 7 0-31 MSCP_END_PACKET 1920
FIRST_CONTENTS 3 0-35 PAR_MEMORY_SWEEP_10 1049
FIRST_CONTENTS 5 0-35 CPU_PAR_INT_10 1119
FIRST_CONTENTS 5 0-35 OLD_CPU_MEM_PAR_ERR_10 256
FIRST_RFB_HEADER 0 0-35 DIAGNOSTIC 2218
FLAGS 2 8-15 MSCP_ERROR_PACKET 2048
FMT22 ** 12 OF 5398
FMT_16 ** 12 RMOF 5628
FMT_ERROR ** 4 ER1 5332
FMT_ERROR ** 4 RMER1 5564
FORK_NUMBER 0 0-17 FE_DATA 4498
FORK_NUMBER 4 0-17 CPU_PAR_TRAP_20 1588
FORK_NUMBER 6 0-17 MONITOR_BUG_DATA_20 1335
FORMAT 2 0-7 MSCP_ERROR_PACKET 2047
FORMAT_ERR 4 6 MASSBUS_ERR_20 1383
FPT_TU ** 00 TUSTAT 3765
FRAMES_READ 8 0-35 DX20_ERR_10 567
FRAMES_READ 8 0-35 MASSBUS_ERR_20 1390
FRAMES_WRITTEN 9 0-35 DX20_ERR_10 568
FRAMES_WRITTEN 9 0-35 MASSBUS_ERR_20 1392
FRAME_IN_ERR 5 0-35 TAPE_ERR_10 743
FSENSE_BYTES 9 0-35 CSB_DX10 2407
FULL_UNIT_NUMBER 5 32-35 USAGE_DATA_20 1479
FUNCTION ** 5-0 RMCS1 5532
FUNCTION_CODE ** 30-35 PTCR 5117
FUNCTION_CODE ** 30-35 STCR 5101
FUNCTION_WORD 4 0-35 NET_HARDWARE_ERR 1756
FUNCT_CODE 1 0-7 DECNET_PHASE_III 1805
FUNC_CODE1 ** 05-01 NC2_CAS_15 2775
FWD ** 06 MIAA_STAT 3797
GO ** 0 RMCS1 5533
GOOD_WORD 2 0-35 CPU_PAR_TRAP_10 1089
GOOD_WORD 2 0-35 CPU_PAR_TRAP_20 1586
GOOD_WORD 8 0-35 KL_OR_KS_PAR_TRAP_10 1002
GRP_SIZ_1 9 16-23 MSCP_END_PACKET 1994
GRP_SIZ_2 9 24-31 MSCP_END_PACKET 1995
HARD 4 0 MASSBUS_ERR_20 1376
HARD 4 1 MASSBUS_ERR_10 494
HARD 4 1 TAPE_ERR_10 728
HARD_POS_ERR 31 0-35 DX20_ERR_10 594
HARD_POS_ERR 36 0-35 MASSBUS_ERR_20 1433
HARD_READ 19 0-35 DX20_ERR_10 582
HARD_READ 21 0-35 MASSBUS_ERR_20 1410
HARD_READ_ERRORS 5 0-35 OLD_TAPE_STATS_10 870
HARD_WRITE 20 0-35 DX20_ERR_10 583
HARD_WRITE 22 0-35 MASSBUS_ERR_20 1411
HARD_WRITE_ERRORS 7 0-35 OLD_TAPE_STATS_10 872
HCCCTL 1 0-5 HARD_COPY_ERR_10 1266
HCCDEV 1 6-11 HARD_COPY_ERR_10 1272
HCCNAM 0 0-35 HARD_COPY_ERR_10 1264
HCCPGM 3 0-35 HARD_COPY_ERR_10 1281
HCCSBP 4 0-35 HARD_COPY_ERR_10 1282
HCCTYP 1 0-35 HARD_COPY_ERR_10 1265
HCCUID 2 0-35 HARD_COPY_ERR_10 1280
HCRC_ERROR ** 8 ER1 5328
HDECCT 18 0-35 OLD_DISK_ERR_10 455
HDEDCR 16 0-35 OLD_DISK_ERR_10 442
HDEECT 4 0-35 OLD_DISK_ERR_10 419
HDEERR 6 0-35 OLD_DISK_ERR_10 425
HDEEXT 20 0-35 OLD_DISK_ERR_10 458
HDEFIL 19 0-35 OLD_DISK_ERR_10 457
HDEHBN 9 0-35 OLD_DISK_ERR_10 428
HDEHCT 2 0-35 OLD_DISK_ERR_10 417
HDEHDI 8 0-35 OLD_DISK_ERR_10 427
HDEHID 1 0-35 OLD_DISK_ERR_10 416
HDEHNG 12 0-35 OLD_DISK_ERR_10 434
HDELOG 17 0-35 OLD_DISK_ERR_10 454
HDEMCT 10 0-35 OLD_DISK_ERR_10 429
HDENAM 0 0-35 OLD_DISK_ERR_10 415
HDEPCT 11 0-35 OLD_DISK_ERR_10 433
HDEPGM 22 0-35 OLD_DISK_ERR_10 460
HDESCT 3 0-35 OLD_DISK_ERR_10 418
HDESDI 7 0-35 OLD_DISK_ERR_10 426
HDESOF 5 0-35 OLD_DISK_ERR_10 423
HDETRC 13 0-35 OLD_DISK_ERR_10 439
HDETSC 15 0-35 OLD_DISK_ERR_10 441
HDETWC 14 0-35 OLD_DISK_ERR_10 440
HDEUID 21 0-35 OLD_DISK_ERR_10 459
HDR_ERR 4 3 MASSBUS_ERR_20 1379
HDR_FORMAT 0 21-23 HEADER 143
HDR_LENGTH 0 24-26 HEADER 145
HDR_WRD_0 0 0-35 HEADER 135
HDWR_OPTION_TYPE 4 28-35 NET_HARDWARE_ERR 1760
HEADER_CODE 10 0-31 MSCP_ERROR_PACKET 2087
HEAD_TAG ** 10 RMMR2 5646
HIGH_ADDRESS 0 0-35 PAR_SWEEP_DATA 4650
HI_CT_DET ** 10 MR 5341
HI_RD_TH ** 02 TUDIAG 3862
HOST_MEM_ADDR 6 0-31 MSCP_ERROR_PACKET 2115
HSBCBP 3 0-35 KS_HALT_STATUS_10 821
HSBCOD 0 0-35 KS_HALT_STATUS_10 817
HSBEPC 1 0-35 KS_HALT_STATUS_10 818
HSC_NODE 0 18-35 HSC50_END_PACKET 1876
HSC_NODE 0 18-35 HSC50_ERROR_PACKET 2020
HS_AR 3 0-35 KS_HS_BLOCK 4565
HS_ARX 4 0-35 KS_HS_BLOCK 4566
HS_BR 5 0-35 KS_HS_BLOCK 4567
HS_BRX 6 0-35 KS_HS_BLOCK 4568
HS_EBR 10 0-35 KS_HS_BLOCK 4570
HS_FLG 13 0-35 KS_HS_BLOCK 4573
HS_HPC 1 0-35 KS_HALT_STATUS_20 1569
HS_HR 2 0-35 KS_HS_BLOCK 4564
HS_MAG 0 0-35 KS_HS_BLOCK 4562
HS_MSK 12 0-35 KS_HS_BLOCK 4572
HS_ONE 7 0-35 KS_HS_BLOCK 4569
HS_PC 1 0-35 KS_HS_BLOCK 4563
HS_PI 14 0-35 KS_HS_BLOCK 4574
HS_T0 16 0-35 KS_HS_BLOCK 4576
HS_T1 17 0-35 KS_HS_BLOCK 4577
HS_UBR 11 0-35 KS_HS_BLOCK 4571
HS_VMA 20 0-35 KS_HS_BLOCK 4578
HS_X1 15 0-35 KS_HS_BLOCK 4575
HUNG_DEVICE 4 2 MASSBUS_ERR_10 496
H_COM_ERROR ** 7 ER1 5329
H_COM_ERROR ** 7 RMER1 5561
H_COM_INH ** 10 OF 5400
H_COM_INH ** 10 RMOF 5630
H_CRC_ERROR ** 8 RMER1 5560
ICR 38 0-35 MASSBUS_ERR_20 1435
ILLEGAL_P ** 02 RPSTA 3197
ILL_0 ** 0 RILL 3133
ILL_1 ** 1 RILL 3145
ILL_2 ** 2 RILL 3146
ILL_3 ** 3 RILL 3147
ILL_4 ** 4 RILL 3148
ILL_5 ** 5 RILL 3149
ILL_6 ** 6 RILL 3150
ILL_7 ** 7 RILL 3151
ILL_FUNCT ** 0 ER1 5336
ILL_FUNCT ** 0 RMER1 5568
ILL_REG ** 1 ER1 5335
ILL_REG ** 1 RMER1 5567
ILR_CAS ** 04 CASSTA 3485
INDEX_ERROR ** 11 ER2 5430
INITIAL_CONTROL_WORD 4 0-35 CHANNEL_ERROR_REPORT_10 388
INIT_CHN_COMMAND 0 0-35 CHN_LOGOUT 2340
INIT_CNTRL_REG 33 0-35 DX20_ERR_10 596
INIT_CNTRL_REG 38 0-35 MASSBUS_ERR_20 1436
INTCOD 0 2-9 TM78_SENSE_BYTES 2827
INTERVENTION_REQ ** 6 DT_SB_0 4440
INTR_ENAB ** 6 RMCS1 5531
INTSTA 11 20-27 TM78_SENSE_BYTES 2873
INT_CODE ** 7 - INTCOD 2899
INT_REQ ** 32 APR_STATUS 4776
INVALID_TRACK_FMT ** 6 DT_SB_1 4453
INVLD_CMD ** 12 RMER2 5655
IN_READY ** 6 RH11_RMCS2 5252
IORB_STATUS 18 0-35 MASSBUS_ERR_20 1406
IO_PAGE_FAIL ** 26 APR_STATUS 4770
I_ADR_ERROR ** 10 ER1 5326
I_ADR_ERROR ** 10 RMER1 5558
JOB_AFFECTED_COUNT 4 0-35 OLD_CPU_NXM_ERR_10 274
JOB_NUMBER 0 0-17 ERROR_LOG 4484
JOB_NUMBER 0 18-35 FE_DATA 4499
JOB_NUMBER 1 0-35 SOFTWARE_EVENT_10 613
JOB_NUMBER 4 18-35 CPU_PAR_TRAP_20 1589
JOB_NUMBER 6 0-35 MONITOR_BUG_DATA_20 1336
JOB_NUMBER 10 0-35 MONITOR_BUG_DATA_10 234
JOB_STOP_TALLY 14 0-35 MONITOR_BUG_DATA_10 238
KAEADR 17 0-35 KL_ADDRESS_FAIL_10 1234
KAEADR 17 0-35 OLD_KL_ADDRESS_FAIL_10 1201
KAEAFT 16 0-35 KL_ADDRESS_FAIL_10 1232
KAEAFT 16 0-35 OLD_KL_ADDRESS_FAIL_10 1200
KAEBEF 15 0-35 KL_ADDRESS_FAIL_10 1230
KAEBEF 15 0-35 OLD_KL_ADDRESS_FAIL_10 1199
KAECNI 20 0-35 KL_ADDRESS_FAIL_10 1238
KAECNI 20 0-35 OLD_KL_ADDRESS_FAIL_10 1204
KAEERA 21 0-35 KL_ADDRESS_FAIL_10 1239
KAEERA 21 0-35 OLD_KL_ADDRESS_FAIL_10 1205
KAEKPG 14 0-35 KL_ADDRESS_FAIL_10 1229
KAEKPG 14 0-35 OLD_KL_ADDRESS_FAIL_10 1198
KAELNA 6 0-35 KL_ADDRESS_FAIL_10 1221
KAELNA 6 0-35 OLD_KL_ADDRESS_FAIL_10 1190
KAEMNA 5 0-35 KL_ADDRESS_FAIL_10 1220
KAEMNA 5 0-35 OLD_KL_ADDRESS_FAIL_10 1189
KAEMNR 7 0-35 KL_ADDRESS_FAIL_10 1222
KAEMNR 7 0-35 OLD_KL_ADDRESS_FAIL_10 1191
KAEMPP 3 0-35 KL_ADDRESS_FAIL_10 1218
KAEMPP 3 0-35 OLD_KL_ADDRESS_FAIL_10 1187
KAENAA 11 0-35 KL_ADDRESS_FAIL_10 1226
KAENAA 11 0-35 OLD_KL_ADDRESS_FAIL_10 1195
KAENAM 0 0-35 KL_ADDRESS_FAIL_10 1215
KAENAM 0 0-35 OLD_KL_ADDRESS_FAIL_10 1184
KAENCS 13 0-35 KL_ADDRESS_FAIL_10 1228
KAENCS 13 0-35 OLD_KL_ADDRESS_FAIL_10 1197
KAENJA 4 0-35 KL_ADDRESS_FAIL_10 1219
KAENJA 4 0-35 OLD_KL_ADDRESS_FAIL_10 1188
KAENOA 12 0-35 KL_ADDRESS_FAIL_10 1227
KAENOA 12 0-35 OLD_KL_ADDRESS_FAIL_10 1196
KAENSC 9 0-35 KL_ADDRESS_FAIL_10 1224
KAENSC 9 0-35 OLD_KL_ADDRESS_FAIL_10 1193
KAENTS 8 0-35 KL_ADDRESS_FAIL_10 1223
KAENTS 8 0-35 OLD_KL_ADDRESS_FAIL_10 1192
KAEPGM 19 0-35 KL_ADDRESS_FAIL_10 1237
KAEPGM 19 0-35 OLD_KL_ADDRESS_FAIL_10 1203
KAEPPN 18 0-35 KL_ADDRESS_FAIL_10 1236
KAEPPN 18 0-35 OLD_KL_ADDRESS_FAIL_10 1202
KAESBD 22 0-35 KL_ADDRESS_FAIL_10 1240
KAESBD 22 0-35 OLD_KL_ADDRESS_FAIL_10 1206
KAESNE 2 0-35 KL_ADDRESS_FAIL_10 1217
KAESNE 2 0-35 OLD_KL_ADDRESS_FAIL_10 1186
KAETNE 1 0-35 KL_ADDRESS_FAIL_10 1216
KAETNE 1 0-35 OLD_KL_ADDRESS_FAIL_10 1185
KAEUEN 10 0-35 KL_ADDRESS_FAIL_10 1225
KAEUEN 10 0-35 OLD_KL_ADDRESS_FAIL_10 1194
KDICNI 11 0-35 OLD_CPU_PAR_INT_10 1073
KDIERA 12 0-35 OLD_CPU_PAR_INT_10 1074
KDIMPA 6 0-35 OLD_CPU_PAR_INT_10 1068
KDIMPC 3 0-35 OLD_CPU_PAR_INT_10 1065
KDIMPP 4 0-35 OLD_CPU_PAR_INT_10 1066
KDIMPT 8 0-35 OLD_CPU_PAR_INT_10 1070
KDIMPW 5 0-35 OLD_CPU_PAR_INT_10 1067
KDINAM 0 0-35 OLD_CPU_PAR_INT_10 1062
KDIPAR 7 0-35 OLD_CPU_PAR_INT_10 1069
KDIPGM 10 0-35 OLD_CPU_PAR_INT_10 1072
KDIPPN 9 0-35 OLD_CPU_PAR_INT_10 1071
KDISBD 13 0-35 OLD_CPU_PAR_INT_10 1075
KDISPE 2 0-35 OLD_CPU_PAR_INT_10 1064
KDITPE 1 0-35 OLD_CPU_PAR_INT_10 1063
KEYPAD_FLAG ** 7 - ENAON 3960
KIIAPR 2 0-35 KI_PAR_NXM_INT_10 939
KIINAM 0 0-35 KI_PAR_NXM_INT_10 937
KIIPCI 1 0-35 KI_PAR_NXM_INT_10 938
KIIPGM 5 0-35 KI_PAR_NXM_INT_10 942
KIIPII 3 0-35 KI_PAR_NXM_INT_10 940
KIIPPN 4 0-35 KI_PAR_NXM_INT_10 941
KL10_PAGED ** 21 PAGE_STATUS 4820
KLER_BLOCK 0 16-31 FE_SUB 4552
KLER_BLOCK_CNT 1 0-15 FE_SUB 4553
KLER_FIRST_WORD 1 16-31 FE_SUB 4554
KLIPA_CHAN 1 15-17 KLIPA 2187
KLIPA_CHAN 1 15-17 KLIPA_STATISTICS 1848
KLIPA_COUNTERS 0 MAIN KLIPA_STATISTICS 1845
KLIPA_PORT 0 0-17 HSC50_END_PACKET 1875
KLIPA_PORT 0 0-17 HSC50_ERROR_PACKET 2019
KL_RLD_STATUS 0 16-31 FE_SUB 4548
KON_NUMBER 5 0-17 USAGE_DATA_20 1478
KON_NUMBER 34 0-17 MASSBUS_ERR_20 1428
KSNBDW 4 0-35 KS_NXM_TRAP_10 972
KSNGDW 8 0-35 KS_NXM_TRAP_10 976
KSNNAM 0 0-35 KS_NXM_TRAP_10 968
KSNNNT 11 0-35 KS_NXM_TRAP_10 982
KSNNRT 10 0-35 KS_NXM_TRAP_10 981
KSNPCT 1 0-35 KS_NXM_TRAP_10 969
KSNPFW 2 0-35 KS_NXM_TRAP_10 970
KSNPGM 7 0-35 KS_NXM_TRAP_10 975
KSNPIT 5 0-35 KS_NXM_TRAP_10 973
KSNPMA 3 0-35 KS_NXM_TRAP_10 971
KSNPPN 6 0-35 KS_NXM_TRAP_10 974
KSNRET 9 0-35 KS_NXM_TRAP_10 977
KS_HS_BLOCK 2 BODY KS_HALT_STATUS_10 819
KS_HS_BLOCK 2 BODY KS_HALT_STATUS_20 1570
LAST_ADDRESS 4 0-35 NXM_MEMORY_SWEEP_10 1029
LAST_ADDRESS 4 0-35 OLD_CPU_NXM_ERR_10 276
LAST_BLOCK ** 10 RMDS 5543
LAST_CMD 34 18-35 MASSBUS_ERR_10 532
LAST_COMMAND 2 0-35 CHN_LOGOUT 2342
LAST_COMMAND 3 0-35 CSB_TM02 2483
LAST_COMMAND 5 0-35 CSB_TM78 2519
LAST_CW 8 0-35 CHANNEL_ERROR_REPORT_10 392
LAST_CW_MINUS_1 7 0-35 CHANNEL_ERROR_REPORT_10 391
LAST_CW_MINUS_2 6 0-35 CHANNEL_ERROR_REPORT_10 390
LAST_DATA 11 0-35 CHANNEL_ERROR_REPORT_10 395
LAST_DATA_MINUS_1 10 0-35 CHANNEL_ERROR_REPORT_10 394
LAST_DATA_MINUS_2 9 0-35 CHANNEL_ERROR_REPORT_10 393
LAST_MUUO 5 0-35 KL_CPU_STATUS_10 1145
LAST_MUUO 6 0-35 KL_CPU_STATUS_20 1664
LAST_MUUO_PC 6 0-35 KL_CPU_STATUS_10 1146
LAST_MUUO_PC 7 0-35 KL_CPU_STATUS_20 1665
LAST_PKT_FLAG 0 10 FE_SUB 4525
LAST_REL_ADDRESS 1 0-35 PAR_SWEEP_DATA 4651
LAST_SECT ** 10 DS 5306
LAST_SECTR ** 2 RMMR1 5586
LAST_SWEEP_COUNT 2 0-35 PAR_SWEEP_DATA 4652
LAST_S_T ** 1 RMMR1 5587
LBN 3 0-35 MASSBUS_ERR_10 492
LBN 3 0-35 MASSBUS_ERR_20 1371
LEFT ** 02 CBUSSTA 3507
LEVEL 8 16-23 MSCP_ERROR_PACKET 2084
LGR_ADDRESS 3 0-35 LOGGER 2233
LGR_BLOCK_ID 4 0-8 LOGGER 2234
LGR_CHANNEL 4 9-17 LOGGER 2235
LGR_COUNT 0 0-17 LOGGER 2230
LGR_CR_MSEC 1 0-35 LOGGER 2231
LGR_DATA_BLOCK 0 MAIN LOGGER 2229
LGR_KONTROLLER 4 18-26 LOGGER 2236
LGR_SCHED_DOWN 34 0-35 LGR_DATA_BLOCK 2268
LGR_SCHED_UP 35 0-35 LGR_DATA_BLOCK 2269
LGR_START_MSEC 8 0-35 LGR_DATA_BLOCK 2263
LGR_START_UDT 7 0-35 LGR_DATA_BLOCK 2262
LGR_TABLE 1 MAIN LGR_DATA_BLOCK 2247
LGR_TABLE_COUNT 0 0-35 LGR_DATA_BLOCK 2245
LGR_TABLE_DATA 1 0-35 LGR_TABLE 2276
LGR_TABLE_GTB 0 18-35 LGR_TABLE 2275
LGR_TABLE_ID 1 0-17 LGR_DATA_BLOCK 2246
LGR_TABLE_SIZE 0 0-17 LGR_TABLE 2274
LGR_TIME_CHANGE_UDT 16 0-35 LGR_DATA_BLOCK 2266
LGR_UNIT 4 27-35 LOGGER 2237
LGR_VERSION 0 0-35 LGR_DATA_BLOCK 2260
LGR_WAKEUP_COUNTER 6 0-35 LGR_DATA_BLOCK 2261
LGR_WAKEUP_MSEC 10 0-35 LGR_DATA_BLOCK 2265
LGR_WAKEUP_UDT 9 0-35 LGR_DATA_BLOCK 2264
LGR_WR_MSEC 2 0-35 LOGGER 2232
LGWC ** 11 CHAN_LOGOUT_1 5071
LINE_NUMBER 4 12-23 SOFTWARE_EVENT_10 618
LINK_PRES ** 22 DM_SR 4139
LOAD_REG ** 6 PREP_REG 5157
LOG_FLAG 0 9 FE_SUB 4524
LOG_TEXT 4 0-35 ERROR_LOG 4489
LONG_WCE ** 20 CONI_STATUS 5038
LOOK_SYNC ** 10 RMMR1 5578
LOSS_CHK ** 10 RMER2 5657
LOSS_CLK ** 11 RMER2 5656
LOST_INT_FLAG 0 5 FE_SUB 4522
LO_RD_TH ** 07 XFRCTL 3942
LPTCNI 1 0-35 LP100_ERR_10 1252
LPTNAM 0 0-35 LP100_ERR_10 1251
LPTTYP 3 0-35 LP100_ERR_10 1254
LPTWRD 2 0-35 LP100_ERR_10 1253
LWR ** 02 MIAA_STAT 3791
LXE ** 09 CHAN_LOGOUT_1 5064
MAGFCC 6 0-35 OLD_TAPE_ERR_10 702
MAGFCS 7 0-35 OLD_TAPE_ERR_10 703
MAGFFB 2 0-35 OLD_TAPE_ERR_10 698
MAGICC 4 0-35 OLD_TAPE_ERR_10 700
MAGICS 5 0-35 OLD_TAPE_ERR_10 701
MAGMED 9 0-35 OLD_TAPE_ERR_10 706
MAGNAM 0 0-35 OLD_TAPE_ERR_10 696
MAGRFF 3 0-35 OLD_TAPE_ERR_10 699
MAGRID 1 0-35 OLD_TAPE_ERR_10 697
MAGRTC 8 0-35 OLD_TAPE_ERR_10 704
MAINT_CLOCK ** 1 MR 5350
MAINT_INDEX ** 2 MR 5349
MAINT_READ ** 4 MR 5347
MAINT_SCLK ** 3 MR 5348
MAINT_WRITE ** 5 MR 5346
MAN_TEST ** 07 MIAA_STAT 3801
MASSBUS_DATA ** 7 - DDR_A 3694
MASSBUS_DATA_B ** 7 - DDR_B 3704
MASTER_OSC ** 22 APR_STATUS 4767
MBATTN ** 07 CBUSSTA 3515
MBD ** 2-0 WMCERR 3715
MBDEM ** 05 CBUSSTA 3513
MBEBL ** 04 DBUSSTA 3527
MBEXC ** 03 DBUSSTA 3526
MBFAIL ** 03 CBUSSTA 3509
MBINIT ** 04 CBUSSTA 3512
MBOCC ** 05 DBUSSTA 3528
MBRUN ** 02 DBUSSTA 3525
MBSCLK ** 00 DBUSSTA 3523
MBSEL ** 07 INTSTA 3755
MBTRA ** 06 CBUSSTA 3514
MBUS_AIE ** 30 CONI_STATUS 5028
MBUS_ATTN ** 28 CONI_STATUS 5030
MBUS_DPE ** 8 RH11_RMCS2 5250
MBUS_ENAB ** 27 CONI_STATUS 5031
MBUS_ENAB ** 27 CONO 5168
MBUS_ERR ** 7 CSR_REG 5191
MBWCLK ** 06 DBUSSTA 3529
MBWREN ** 07 DBUSSTA 3530
MB_AS 8 18-35 CSB_TM02 2493
MB_AS_END 4 0-17 MB_DEV 4599
MB_AS_ERR 4 18-35 MB_DEV 4600
MB_A_OUT ** 03 INTSTA 3745
MB_B_OUT ** 02 INTSTA 3744
MB_CC_END 11 0-17 MB_DEV 4619
MB_CC_ERR 11 18-35 MB_DEV 4620
MB_CHK_SUM 11 18-35 CSB_TM02 2499
MB_CHK_SUM_END 7 0-17 MB_DEV 4609
MB_CHK_SUM_ERR 7 18-35 MB_DEV 4610
MB_CR 4 18-35 CSB_TM02 2485
MB_CR_END 0 0-17 MB_DEV 4589
MB_CR_ERR 0 18-35 MB_DEV 4590
MB_DA_END 5 0-17 MB_DEV 4601
MB_DA_ERR 5 18-35 MB_DEV 4602
MB_DC_END 10 0-17 MB_DEV 4617
MB_DC_ERR 10 18-35 MB_DEV 4618
MB_DEVICE_REG 18 BODY MASSBUS_ERR_10 529
MB_DEV_TABLE 39 BODY MASSBUS_ERR_20 1437
MB_DS 5 18-35 CSB_TM02 2487
MB_DS_END 1 0-17 MB_DEV 4591
MB_DS_ERR 1 18-35 MB_DEV 4592
MB_DT 10 18-35 CSB_TM02 2497
MB_DT_END 6 0-17 MB_DEV 4605
MB_DT_ERR 6 18-35 MB_DEV 4606
MB_ECC1_END 14 0-17 MB_DEV 4625
MB_ECC1_ERR 14 18-35 MB_DEV 4626
MB_ECC2_END 15 0-17 MB_DEV 4627
MB_ECC2_ERR 15 18-35 MB_DEV 4628
MB_ER1_END 2 0-17 MB_DEV 4593
MB_ER1_ERR 2 18-35 MB_DEV 4594
MB_ER2_END 12 0-17 MB_DEV 4621
MB_ER2_ERR 12 18-35 MB_DEV 4622
MB_ER3_END 13 0-17 MB_DEV 4623
MB_ER3_ERR 13 18-35 MB_DEV 4624
MB_ERR 6 18-35 CSB_TM02 2489
MB_ERR_END 2 0-17 MB_DEV 4595
MB_ERR_ERR 2 18-35 MB_DEV 4596
MB_FR_CNT 9 18-35 CSB_TM02 2495
MB_FR_CNT_END 5 0-17 MB_DEV 4603
MB_FR_CNT_ERR 5 18-35 MB_DEV 4604
MB_LA_END 7 0-17 MB_DEV 4607
MB_LA_ERR 7 18-35 MB_DEV 4608
MB_MR 7 18-35 CSB_TM02 2491
MB_MR_END 3 0-17 MB_DEV 4597
MB_MR_ERR 3 18-35 MB_DEV 4598
MB_OF_END 9 0-17 MB_DEV 4613
MB_OF_ERR 9 18-35 MB_DEV 4614
MB_PAR ** 27 APR_STATUS 4771
MB_SN 12 18-35 CSB_TM02 2501
MB_SN_END 8 0-17 MB_DEV 4611
MB_SN_ERR 8 18-35 MB_DEV 4612
MB_TC 13 18-35 CSB_TM02 2503
MB_TC_END 9 0-17 MB_DEV 4615
MB_TC_ERR 9 18-35 MB_DEV 4616
MD 16 0-35 CSB_DX10 2421
MEDIAID 1 0-35 DX20_ERR_10 550
MEDIAID 1 0-35 HSC50_END_PACKET 1877
MEDIAID 1 0-35 MASSBUS_ERR_20 1368
MEDIAID 1 0-35 OLD_TAPE_STATS_10 866
MEDIAID 1 0-35 TAPE_ERR_10 718
MEDIA_TYP_1 7 0-7 MSCP_END_PACKET 1974
MEDIA_TYP_2 7 8-15 MSCP_END_PACKET 1975
MEDIA_TYP_3 7 16-23 MSCP_END_PACKET 1976
MEDIA_TYP_4 7 24-31 MSCP_END_PACKET 1977
MEM_PAR_ERRORS 1 0-35 CPU_PAR_INT_10 1115
MEM_PAR_ERRORS 4 0-35 CPU_PAR_INT_20 1634
MEM_PE ** 01 CHAN_LOGOUT_1 5056
MF_20_TEXT 0 0-35 MF_20_ERR_20 1688
MIAA_STAT 12 2-9 TM78_SENSE_BYTES 2875
MIAB_STAT 12 28-35 TM78_SENSE_BYTES 2876
MICRO_CODE_VER_NO 34 0-35 DX20_ERR_10 597
MISS_XFER ** 9 RH11_RMCS2 5249
MK2P ** 03 RPSTA 3198
MK2_0 ** 0 RMK2 3159
MK2_1 ** 1 RMK2 3166
MK2_2 ** 2 RMK2 3167
MK2_3 ** 3 RMK2 3168
MK2_4 ** 4 RMK2 3169
MK2_5 ** 5 RMK2 3170
MK2_6 ** 6 RMK2 3171
MK2_7 ** 7 RMK2 3172
MODE ** 0 PAGE_FAIL_WORD 4791
MOL ** 12 DS 5304
MOL ** 12 RMDS 5541
MONITOR ** 2 SINK_FLAGS 5712
MONITOR_RUNTIME 2 0-35 AVAIL_RELOAD 2286
MONITOR_VERSION 1 0-35 AVAIL_RELOAD 2285
MONITOR_VERSION 2 0-35 MONITOR_BUG_DATA_20 1324
MONITOR_VERSION 2 0-35 SYSTEM_RELOAD_20 1302
MONITOR_VERSION 8 0-35 MONITOR_BUG_DATA_10 231
MONITOR_VERSION 8 0-35 SYSTEM_RELOAD_10 207
MONITOR_VERSION 17 0-35 LGR_DATA_BLOCK 2267
MOT ** 01 MIAA_STAT 3790
MOVE_HEAD ** 13 DT 5378
MOVE_HEAD ** 13 RMDT 5611
MPA_CAS_20 16 0-17 TM78_CAS_REGS 2584
MPA_CAS_20 16 18-35 TM78_CAS_REGS 2584
MPD_CAS_21 17 0-17 TM78_CAS_REGS 2588
MPD_CAS_21 17 18-35 TM78_CAS_REGS 2588
MPD_CM_PE ** 13 MPD_CAS_21 2798
MPD_CPE ** 11 MPD_CAS_21 2802
MPD_EV_PAR ** 10 MPD_CAS_21 2805
MPD_HLDA ** 09 MPD_CAS_21 2808
MPD_HOLD ** 08 MPD_CAS_21 2811
MPD_ILR ** 12 MPD_CAS_21 2800
MPD_INT_DATA ** 07-00 MPD_CAS_21 2813
MPD_TM_CLR ** 14 MPD_CAS_21 2794
MPD_TM_RDY ** 15 MPD_CAS_21 2791
MPE_CNT 28 0-35 DX20_ERR_10 591
MPE_CNT 30 0-35 MASSBUS_ERR_20 1421
MPROC_RUN ** 32 CSR_REG 5212
MP_RUN ** 23 DM_SR 4148
MP_START ** 2 DM_MR 4347
MR1 19 0-35 CSB_DX10 2424
MSCP_END_PACKET 6 BODY HSC50_END_PACKET 1888
MSCP_ERROR_PACKET 1 BODY HSC50_ERROR_PACKET 2021
MSCP_STATUS 0 0-35 MSCP_ERROR 2208
MSCP_VERS_1 3 0-7 MSCP_END_PACKET 1940
MSCP_VERS_2 3 8-15 MSCP_END_PACKET 1941
MTOPR_FUNCTION 3 0-35 CONFIG_CHANGE_20 1504
MULTIPLE_FIELD ** 6 DATA_TYPE 5757
MULTI_H_SEL ** 9 ER2 5436
MULTI_UNIT_CODE 5 16-31 MSCP_ERROR_PACKET 2060
MULTI_UNT_COD_1 3 0-7 MSCP_END_PACKET 1935
MULTI_UNT_COD_2 3 8-15 MSCP_END_PACKET 1937
MUST_BE_ONES ** 0-2 PAGE_DATAI 4782
MUUO_CONTEXT_WORD 7 0-35 KL_CPU_STATUS_10 1147
MUUO_CONTEXT_WORD 8 0-35 KL_CPU_STATUS_20 1666
MUUO_RESERVED 5 0-35 KL_CPU_STATUS_20 1663
MUUO_RESERVED 8 0-35 KL_CPU_STATUS_10 1148
NC1_CAS_14 12 0-17 TM78_CAS_REGS 2576
NC1_CAS_14 12 18-35 TM78_CAS_REGS 2576
NC2_CAS_15 13 0-17 TM78_CAS_REGS 2581
NC2_CAS_15 13 18-35 TM78_CAS_REGS 2581
NC2_CMD_CNT1 ** 15-08 NC2_CAS_15 2774
NC3_CAS_16 14 0-17 TM78_CAS_REGS 2582
NC3_CAS_16 14 18-35 TM78_CAS_REGS 2582
NC3_FUNC_CODE2 ** 05-01 NC3_CAS_16 2780
NC4_CAS_17 15 0-17 TM78_CAS_REGS 2583
NC4_CAS_17 15 18-35 TM78_CAS_REGS 2583
NC4_CMD_CNT3 ** 15-08 NC4_CAS_17 2785
NC4_FUNC_CODE3 ** 05-01 NC4_CAS_17 2786
NDT ** 03 TUX 3905
NEG_BLK_CNT ** 20-29 PTCR 5116
NEG_BLK_CNT ** 20-29 STCR 5100
NEG_FUNCTION_COUNT 0 0-17 SBDIAG_LIST 4697
NETCON_VERSION 0 0-35 NETCON_START 1698
NI_FLAG 1 0 KLIPA 2186
NI_FLAG 1 0 KLIPA_STATISTICS 1847
NODE_NAME 1 0-35 CONFIG_CHANGE_10 650
NODE_NAME 1 MAIN$Z NETCON_START 1699
NODE_NUMBER 0 0-35 CONFIG_CHANGE_10 645
NODE_NUMBER 4 0-11 SOFTWARE_EVENT_10 617
NON_RECOVERABLE 4 1 DX20_ERR_10 560
NON_X_DRIVE ** 12 RH11_RMCS2 5246
NOT_DONE_0 ** 0 RDON 3103
NOT_DONE_1 ** 1 RDON 3106
NOT_DONE_2 ** 2 RDON 3109
NOT_DONE_3 ** 3 RDON 3112
NOT_DONE_4 ** 4 RDON 3115
NOT_DONE_5 ** 5 RDON 3118
NOT_DONE_6 ** 6 RDON 3121
NOT_DONE_7 ** 7 RDON 3124
NOT_DONE_P ** 01 RPSTA 3196
NOT_KL_FLAG 9 0 KL_OR_KS_PAR_TRAP_10 1003
NOT_RECOVERED_COUNT 6 0-35 CPU_PAR_TRAP_10 1101
NOT_RECOVERED_COUNT 11 0-35 KL_OR_KS_PAR_TRAP_10 1013
NOT_RECOVERED_FLAG 4 1 CPU_PAR_TRAP_10 1092
NOT_RECOVERED_FLAG 7 1 CPU_PAR_TRAP_20 1593
NOT_RECOVERED_FLAG 9 1 KL_OR_KS_PAR_TRAP_10 1004
NOT_WR ** 06 TUDIAG 3868
NO_BLK_ADR ** 15 DT 5376
NO_FRAMES_READ 2 0-35 OLD_TAPE_STATS_10 867
NO_FRAMES_WRITTEN 3 0-35 OLD_TAPE_STATS_10 868
NO_H_SEL ** 10 ER2 5433
NO_RECORD_FOUND ** 3 DT_SB_1 4456
NST_CAS_13 11 0-17 TM78_CAS_REGS 2575
NST_CAS_13 11 18-35 TM78_CAS_REGS 2575
NTHUNG_CNT 6 0-8 DSCSBP 3982
NTHUNG_CNT 9 0-8 MASSBUS_ERR_10 510
NUMBER_IO_INSTR 0 0-17 DEVICE_STATUS_10 1171
NUMBER_OF_RESULTS 1 0-17 DEVICE_STATUS_10 1173
NUM_READS 2 0-35 HSC50_END_PACKET 1878
NUM_WRITES 3 0-35 HSC50_END_PACKET 1880
NXM ** 11 RH11_RMCS2 5247
NXM_CNT 29 0-35 DX20_ERR_10 592
NXM_CNT 31 0-35 MASSBUS_ERR_20 1422
NXM_OVRN_COUNT 1 0-35 CHANNEL_ERROR_REPORT_10 385
NXM_TAB 13 HEAD SYSTEM_RELOAD_10 217
NXM_TAB_AFTER 1 HEAD CONFIG_CHANGE_10 647
NXM_TAB_AFTER_ERR 14 HEAD NXM_MEMORY_SWEEP_10 1040
NXM_TAB_AFTER_ERR 16 HEAD OLD_CPU_NXM_ERR_10 288
NXM_TAB_BEFORE 0 HEAD CONFIG_CHANGE_10 642
NXM_TAB_BEFORE_ERR 13 HEAD NXM_MEMORY_SWEEP_10 1039
NXM_TAB_BEFORE_ERR 15 HEAD OLD_CPU_NXM_ERR_10 287
NXM_WORD 0 0-35 NXM_TAB 4637
N_CHVRSN 4 24-31 MSCP_END_PACKET 1952
N_CNTRLR_CLASS_BYTE 6 8-15 MSCP_END_PACKET 1966
N_CNTRLR_IDEN_ONE_1 5 0-7 MSCP_END_PACKET 1958
N_CNTRLR_IDEN_ONE_2 5 8-15 MSCP_END_PACKET 1959
N_CNTRLR_IDEN_ONE_3 5 16-23 MSCP_END_PACKET 1960
N_CNTRLR_IDEN_ONE_4 5 24-31 MSCP_END_PACKET 1961
N_CNTRLR_MODEL_BYTE 6 0-7 MSCP_END_PACKET 1965
N_CSVRSN 4 16-23 MSCP_END_PACKET 1951
N_UHVRSN 10 24-31 MSCP_END_PACKET 2004
N_UNIT_CLASS_BYTE 6 8-15 MSCP_END_PACKET 1964
N_UNIT_IDEN_ONE_1 5 0-7 MSCP_END_PACKET 1954
N_UNIT_IDEN_ONE_2 5 8-15 MSCP_END_PACKET 1955
N_UNIT_IDEN_ONE_3 5 16-23 MSCP_END_PACKET 1956
N_UNIT_IDEN_ONE_4 5 24-31 MSCP_END_PACKET 1957
N_UNIT_MODEL_BYTE 6 0-7 MSCP_END_PACKET 1963
N_USVRSN 10 16-23 MSCP_END_PACKET 2003
N_VOL_SER_NUMBER_1 10 0-7 MSCP_END_PACKET 1997
N_VOL_SER_NUMBER_2 10 8-10 MSCP_END_PACKET 1998
N_VOL_SER_NUMBER_3 10 16-23 MSCP_END_PACKET 1999
N_VOL_SER_NUMBER_4 10 24-31 MSCP_END_PACKET 2000
OBJ_CNT_1 9 0-7 MSCP_ERROR_PACKET 2173
OBJ_CNT_2 9 8-15 MSCP_ERROR_PACKET 2174
OBJ_CNT_3 9 16-23 MSCP_ERROR_PACKET 2175
OBJ_CNT_4 9 24-31 MSCP_ERROR_PACKET 2176
OCCUP ** 15 RMMR1 5573
OFFSET ** 7-0 OF 5401
OFFSET_DIRTN ** 7 RMOF 5631
OFF_CYL ** 15 ER3 5465
OFSET_MODE ** 0 RMDS 5548
ONL ** 05 TUSTAT 3770
ONLINE ** 00 CBUSSTA 3503
OPERATION_INCOMPLETE ** 0 DT_SB_1 4459
OPERATOR_COMMENTS 11 0-35 SYSTEM_RELOAD_10 213
OPER_INC ** 13 ER1 5323
OPER_INC ** 13 RMER1 5555
OPER_PLUG ** 13 RMER2 5654
OPP ** 07 RET2_CNT 3894
OUTPUT_FORMAT ** 5-4 DATA_TYPE 5751
OUTSTANDING_CRN 3 0-31 MSCP_END_PACKET 1926
OUT_READY ** 7 RH11_RMCS2 5251
OVERRUN_ERR 32 0-35 DX20_ERR_10 595
OVERRUN_ERR 37 0-35 MASSBUS_ERR_20 1434
OVER_RUN ** 26 CONI_STATUS 5032
OVN ** 13 CHAN_LOGOUT_1 5080
PACKET_RCVD_CNT 8 0-35 KLIPA_COUNTERS 1864
PACKET_XMIT_CNT 7 0-35 KLIPA_COUNTERS 1863
PACK_DATA ** 8 RMMR1 5580
PACK_HEADER ** 7 RMMR1 5581
PAD1_CNT 10 10-17 TM78_SENSE_BYTES 2866
PAD2_CNT 10 2-9 TM78_SENSE_BYTES 2867
PAD_CNT ** 7 - PAD1_CNT 3651
PAD_CNT ** 7 - PAD2_CNT 3659
PAGE_DATAI 3 0-35 KL_CPU_STATUS_10 1143
PAGE_DATAI 3 0-35 KL_CPU_STATUS_20 1661
PAGE_DATAI 37 0-35 MONITOR_BUG_DATA_20 1353
PAGE_FAIL_FLAGS 87 0-35 KL_CPU_STATUS_20 1673
PAGE_FAIL_NEW_PC 88 0-35 KL_CPU_STATUS_10 1156
PAGE_FAIL_NEW_PC 89 0-35 KL_CPU_STATUS_20 1675
PAGE_FAIL_OLD_PC 87 0-35 KL_CPU_STATUS_10 1155
PAGE_FAIL_OLD_PC 88 0-35 KL_CPU_STATUS_20 1674
PAGE_FAIL_WORD 0 0-35 CPU_PAR_TRAP_10 1087
PAGE_FAIL_WORD 0 0-35 CPU_PAR_TRAP_20 1584
PAGE_FAIL_WORD 2 0-35 KL_OR_KS_PAR_TRAP_10 996
PAGE_FAIL_WORD 86 0-35 KL_CPU_STATUS_10 1154
PAGE_FAIL_WORD 86 0-35 KL_CPU_STATUS_20 1672
PAGE_STATUS 4 0-35 KL_CPU_STATUS_10 1144
PAGE_STATUS 4 0-35 KL_CPU_STATUS_20 1662
PAGE_STATUS 36 0-35 MONITOR_BUG_DATA_20 1352
PARAMETER_COUNTER_FLAG ** 15 DATA_ID 5727
PARAMETER_TYPE ** 11-0 DATA_ID 5731
PARENT_HDWR_TYPE 4 10-17 NET_HARDWARE_ERR 1758
PARENT_SFWR_TYPE 4 20-27 NET_HARDWARE_ERR 1759
PAR_BIT ** 17 RR 5129
PAR_BIT ** 17 WR 5136
PAR_ERROR ** 3 ER1 5333
PAR_ERROR ** 3 RMER1 5565
PAR_SWEEP_DATA 5 HEAD PAR_MEMORY_SWEEP_10 1051
PAR_SWEEP_DATA 7 HEAD CPU_PAR_INT_10 1121
PAR_SWEEP_DATA 7 HEAD OLD_CPU_MEM_PAR_ERR_10 258
PAR_TEST ** 4 RH11_RMCS2 5254
PATH_A_ACK_CNT 0 0-35 KLIPA_COUNTERS 1856
PATH_A_NAK_CNT 1 0-35 KLIPA_COUNTERS 1857
PATH_A_NO_RESP_CNT 2 0-35 KLIPA_COUNTERS 1858
PATH_B_ACK_CNT 3 0-35 KLIPA_COUNTERS 1859
PATH_B_NAK_CNT 4 0-35 KLIPA_COUNTERS 1860
PATH_B_NO_RESP_CNT 5 0-35 KLIPA_COUNTERS 1861
PBAR 2 0-35 CSB_TM02 2480
PBAR 4 0-35 CSB_TM78 2518
PC_FLAGS 2 0-35 CPU_PAR_INT_20 1632
PEC ** 6 MIAB_STAT 3825
PEGCRTK ** 03 CH0TIE 3294
PEGCRTK ** 03 CH1TIE 3308
PEGCRTK ** 03 CH2TIE 3323
PEGCRTK ** 03 CH3TIE 3339
PEGCRTK ** 03 CH4TIE 3355
PEGCRTK ** 03 CH5TIE 3371
PEGCRTK ** 03 CH6TIE 3386
PEGCRTK ** 03 CH7TIE 3402
PEGCRTK ** 03 CHPTIE 3417
PERMANENT_ERR ** 7 DT_SB_1 4452
PES ** 03 TUSTAT 3768
PE_WR_PE ** 01 INTSTA 3741
PF_CODE ** 1-5 PAGE_FAIL_WORD 4803
PHTIE0 ** 01 CH0TIE 3292
PHTIE1 ** 01 CH1TIE 3306
PHTIE2 ** 01 CH2TIE 3321
PHTIE3 ** 01 CH3TIE 3337
PHTIE4 ** 01 CH4TIE 3353
PHTIE5 ** 01 CH5TIE 3369
PHTIE6 ** 01 CH6TIE 3384
PHTIE7 ** 01 CH7TIE 3400
PHTIEP ** 01 CHPTIE 3415
PHUNG_CNT 5 18-26 OLD_DISK_STATS_10 839
PHUNG_CNT 6 18-26 DSCSBP 3984
PHUNG_CNT 9 18-26 MASSBUS_ERR_10 512
PHYS_ADDRESS 3 0-35 CPU_PAR_TRAP_10 1090
PHYS_ADDRESS 3 0-35 KL_OR_KS_PAR_TRAP_10 997
PHYS_ADDRESS 6 0-35 CPU_PAR_TRAP_20 1591
PIA ** 33-35 CONI_STATUS 5025
PIA ** 33-35 CONO 5174
PIA ** 33-35 CSR_REG 5213
PIP ** 13 DS 5303
PIP ** 13 RMDS 5540
PI_AAD 4 0-35 OLD_CPU_PAR_INT_20 1612
PI_ADA 6 0-35 OLD_CPU_PAR_INT_20 1614
PI_ADD 22 0-35 OLD_CPU_PAR_INT_20 1617
PI_CDA 46 0-35 OLD_CPU_PAR_INT_20 1619
PI_CHANNELS_ON ** 29-35 PI_STATUS 4833
PI_CNI 0 0-35 OLD_CPU_PAR_INT_20 1608
PI_DAT 34 0-35 OLD_CPU_PAR_INT_20 1618
PI_ERA 1 0-35 OLD_CPU_PAR_INT_20 1609
PI_FPC 2 0-35 OLD_CPU_PAR_INT_20 1610
PI_IN_PROGRESS ** 21-27 PI_STATUS 4831
PI_LEVEL ** 33-35 APR_STATUS 4777
PI_OAD 5 0-35 OLD_CPU_PAR_INT_20 1613
PI_ODA 7 0-35 OLD_CPU_PAR_INT_20 1615
PI_REQUESTS ** 11-17 PI_STATUS 4827
PI_SBD 10 0-35 OLD_CPU_PAR_INT_20 1616
PI_STATUS 2 0-35 KL_CPU_STATUS_10 1142
PI_STATUS 2 0-35 KL_CPU_STATUS_20 1660
PI_STATUS 3 0-35 KL_PAR_NXM_INT_10 957
PI_STATUS 5 0-35 KL_OR_KS_PAR_TRAP_10 999
PI_STATUS 26 0-35 MONITOR_BUG_DATA_20 1342
PI_STATUS 32 0-35 MONITOR_BUG_DATA_10 242
PI_SWP 3 0-35 OLD_CPU_PAR_INT_20 1611
PI_SYS_ON ** 28 PI_STATUS 4832
PLO_BP ** 06 XFRCTL 3939
PLO_UNS ** 13 ER2 5424
PM ** 03 ECCSTA 3274
PORT ** 07 TUX 3913
PORTSEL_MIA ** 2-0 MIAB_STAT 3809
PORT_ID_CODE ** 15-17 CSR_REG 5197
PORT_PRESENT ** 0 CSR_REG 5184
PORT_SEL ** 10 RMCS1 5528
POSITION_1 7 0-7 MSCP_END_PACKET 1969
POSITION_2 7 8-15 MSCP_END_PACKET 1970
POSITION_3 7 16-23 MSCP_END_PACKET 1971
POSITION_4 7 24-31 MSCP_END_PACKET 1972
POSITION_AT_ERR_1 4 0-35 HSC50_END_PACKET 1882
POSITION_AT_ERR_2 5 0-35 HSC50_END_PACKET 1885
POSITION_ERR 4 5 MASSBUS_ERR_20 1382
POST_0 ** 0 RPOSTN 3212
POST_1 ** 1 RPOSTN 3218
POST_2 ** 2 RPOSTN 3219
POST_3 ** 3 RPOSTN 3220
POST_4 ** 4 RPOSTN 3221
POST_5 ** 5 RPOSTN 3222
POST_6 ** 6 RPOSTN 3223
POST_7 ** 7 RPOSTN 3224
POST_P ** 05 RPSTA 3200
PPN 8 0-35 OLD_TAPE_STATS_10 873
PPN 10 0-35 TAPE_ERR_10 762
PRDD 7 28-35 TM78_SENSE_BYTES 2856
PREAMBLE_ERR ** 05 RPATH 2988
PRES_TUX ** 02 TUX 3904
PREV_BLOCK ** 9-11 PAGE_DATAI 4784
PREV_CONTEXT ** 13-17 PAGE_DATAI 4785
PRI_CFL ** 31 CONI_STATUS 5027
PROGRAM_COUNTER 1 0-35 KL_OR_KS_PAR_TRAP_10 995
PROGRAM_COUNTER 1 0-35 KL_PAR_NXM_INT_10 955
PROGRAM_COUNTER 3 0-35 CPU_PAR_INT_20 1633
PROGRAM_COUNTER 3 0-35 OLD_CPU_NXM_ERR_10 273
PROGRAM_COUNTER 4 0-35 CPU_PAR_INT_10 1118
PROGRAM_COUNTER 4 0-35 OLD_CPU_MEM_PAR_ERR_10 255
PROGRAM_COUNTER 7 0-35 CPU_PAR_TRAP_10 1102
PROGRAM_NAME 2 MAIN$Z NETCON_START 1700
PROGRAM_NAME 3 0-35 FE_DATA 4502
PROGRAM_NAME 3 0-35 SOFTWARE_EVENT_10 615
PROGRAM_NAME 5 0-35 CPU_PAR_TRAP_20 1590
PROGRAM_NAME 5 MAIN$Z NODE_DOWN_LINE_DUMP 1745
PROGRAM_NAME 5 MAIN$Z NODE_DOWN_LINE_LOAD 1710
PROGRAM_NAME 7 0-35 KL_OR_KS_PAR_TRAP_10 1001
PROGRAM_NAME 8 0-35 MONITOR_BUG_DATA_20 1338
PROGRAM_NAME 10 0-35 CPU_PAR_INT_10 1124
PROGRAM_NAME 10 0-35 OLD_CPU_MEM_PAR_ERR_10 261
PROGRAM_NAME 11 0-35 TAPE_ERR_10 763
PROGRAM_NAME 12 0-35 MONITOR_BUG_DATA_10 236
PROGRAM_NAME 19 0-35 OLD_CPU_NXM_ERR_10 291
PROGRAM_RUN 12 0-35 DX20_ERR_10 571
PROGRAM_RUN 12 0-35 MASSBUS_ERR_20 1395
PROGRAM_RUN 13 0-35 MASSBUS_ERR_10 519
PROG_ABLE ** 9 DS 5307
PROG_ABLE ** 9 RMDS 5544
PROG_ERROR ** 10 RH11_RMCS2 5248
PROJ_PROG_NO 12 0-35 MASSBUS_ERR_10 517
PROM_STROB ** 5 RMMR1 5583
PSTAT 7 2-9 TM78_SENSE_BYTES 2855
PTCR 1 0-35 CSB_TM02 2476
PTCR 3 0-35 CSB_TM78 2517
PUBLIC_MODE ** 6 PAGE_FAIL_WORD 4800
PWR_FAIL ** 30 APR_STATUS 4774
PWR_OK ** 05 INTSTA 3750
R1_ERW 3 0-35 FE_RELOAD_20 1558
R1_FNM 2 0-35 FE_RELOAD_20 1557
R1_NUM 0 0-35 FE_RELOAD_20 1536
R1_STS 1 0-35 FE_RELOAD_20 1537
RAMT 1 20-27 TM78_SENSE_BYTES 2833
RBC 0 0-35 CSB_DX10 2382
RBNS 11 16-23 MSCP_END_PACKET 2008
RCMLP 1 28-35 TM78_SENSE_BYTES 2832
RCT_SIZ_1 11 0-7 MSCP_END_PACKET 2006
RCT_SIZ_2 11 8-15 MSCP_END_PACKET 2007
RD ** 06 RET2_CNT 3893
RDATA 3 28-35 TM78_SENSE_BYTES 2840
RDC_SEL ** 5-3 XFRCTL 3931
RDERA_PHYS_ADDRESS ** 14-35 RDERA_STATUS 4850
RDERA_STATUS 1 0-35 CPU_PAR_INT_20 1631
RDERA_STATUS 4 0-35 KL_PAR_NXM_INT_10 958
RDERA_STATUS 9 0-35 KL_CPU_STATUS_10 1149
RDERA_STATUS 9 0-35 KL_CPU_STATUS_20 1667
RDERA_STATUS 12 0-35 CPU_PAR_INT_10 1126
RDERA_STATUS 38 0-35 MONITOR_BUG_DATA_20 1354
RDFILE_SEQNUM 4 0 HEADER 156
RDON 2 10-17 TM78_SENSE_BYTES 2834
RDP ** 01 PSTAT 3452
RDY_ON ** 06 TUSTAT 3772
RD_EN ** 05 TUDIAG 3867
RD_GCR 11 0-35 USAGE_DATA_20 1488
RD_NRZI 9 0-35 USAGE_DATA_20 1486
RD_PE 10 0-35 USAGE_DATA_20 1487
RD_WR_UNSF ** 4 ER2 5451
READY ** 7 RMCS1 5530
READ_DATA ** 7-0 PRDD 3472
READ_WRITE ** 30 DCR 5147
RECORD_IN_ERROR 3 0-35 TAPE_ERR_10 722
RECORD_IN_ERROR 3 18-35 DX20_ERR_10 557
RECORD_IN_ERROR 3 18-35 MASSBUS_ERR_20 1374
RECOVERED_COUNT 5 0-35 CPU_PAR_TRAP_10 1100
RECOVERED_COUNT 10 0-35 KL_OR_KS_PAR_TRAP_10 1012
RECS_SKIPD_1 3 0-7 MSCP_END_PACKET 1931
RECS_SKIPD_2 3 3-15 MSCP_END_PACKET 1932
RECS_SKIPD_3 3 16-23 MSCP_END_PACKET 1933
RECS_SKIPD_4 3 24-31 MSCP_END_PACKET 1934
RECV_NODE_ID 0 18-35 NET_HARDWARE_ERR 1752
RECV_NODE_NAME 2 MAIN$Z NET_HARDWARE_ERR 1754
REC_NOMOTION_ERR 4 17 MASSBUS_ERR_20 1384
REDY ** 07 TUSTAT 3775
REF_DATA ** 4-6 RDERA_STATUS 4841
REGISTER_COUNT 27 0-35 MONITOR_BUG_DATA_20 1343
REGISTER_FOUR 31 0-35 MONITOR_BUG_DATA_20 1347
REGISTER_ONE 28 0-35 MONITOR_BUG_DATA_20 1344
REGISTER_THREE 30 0-35 MONITOR_BUG_DATA_20 1346
REGISTER_TWO 29 0-35 MONITOR_BUG_DATA_20 1345
REG_A_ERROR ** 24 CONI_STATUS 5034
REG_BEFORE_ERR 6 0-35 TAPE_ERR_10 745
REG_SEL_CODE ** 0-5 PREP_REG 5156
RELATIVE_ADDRESS 7 0-35 OLD_CPU_NXM_ERR_10 277
RELOAD_DATE_TIME 4 0-35 AVAIL_RELOAD 2288
RELOAD_FLAGS 6 0-35 SYSTEM_RELOAD_20 1309
RELOAD_WHY_SIXBIT 5 0-35 AVAIL_RELOAD 2289
REND 2 20-27 TM78_SENSE_BYTES 2837
REQ_A ** 15 RMMR2 5641
REQ_B ** 14 RMMR2 5642
RESERVED_WORD 3 0-35 CHN_LOGOUT 2343
RESET_CLP ** 7 PTCR 5113
RESET_CLP ** 7 STCR 5097
RES_WMC_DRBUS ** 01 WMCSTA 3541
RET1_CNT 13 28-35 TM78_SENSE_BYTES 2880
RET2_CNT 13 20-27 TM78_SENSE_BYTES 2881
RETRIEVE_EXTRACT 0 15 HEADER 138
RETRY_CNT 4 18-35 DX20_ERR_10 564
RETRY_CNT 4 18-35 MASSBUS_ERR_10 501
RETRY_CNT 32 18-35 MASSBUS_ERR_20 1423
RETRY_COUNT 7 18-35 CPU_PAR_TRAP_20 1598
RETURN_CODE 4 28-35 NODE_DOWN_LINE_DUMP 1744
RETURN_CODE 4 28-35 NODE_DOWN_LINE_LOAD 1709
RET_CNT ** 7 - RET1_CNT 3877
REV ** 04 TUX 3908
REVERSE ** 05 MIAA_STAT 3795
REV_CMD ** 05 RET2_CNT 3890
REV_LEVEL_0_3 12 0-35 TAPE_ERR_10 766
REV_LEVEL_4_7 13 0-35 TAPE_ERR_10 767
REW ** 01 TUX 3903
REW_TU ** 04 TUSTAT 3769
RH10_AR_FULL ** 0 CONI_RH10 4992
RH10_ATTN ** 30 CONI_RH10 5013
RH10_BUSY ** 31 CONI_RH10 5014
RH10_CBUS_OVRUN ** 28 CONI_RH10 5011
RH10_CB_FULL ** 1 CONI_RH10 4993
RH10_CC_INH ** 3 CONI_RH10 4994
RH10_CDATA_PE ** 15 CONI_RH10 5000
RH10_CHAN_ACT ** 4 CONI_RH10 4995
RH10_CHAN_ERROR ** 20 CONI_RH10 5005
RH10_CHAN_PLS ** 5 CONI_RH10 4996
RH10_CW_PE ** 16 CONI_RH10 5001
RH10_CW_WRITE ** 21 CONI_RH10 5006
RH10_DBUS_PE ** 18 CONI_RH10 5003
RH10_DF22 ** 6 CONI_RH10 4997
RH10_DONE ** 32 CONI_RH10 5015
RH10_DREXC_ERROR ** 19 CONI_RH10 5004
RH10_DR_RE_ERROR ** 23 CONI_RH10 5008
RH10_ILL_CMD ** 24 CONI_RH10 5009
RH10_ILL_FUNCT ** 9 CONI_RH10 4998
RH10_NXM ** 17 CONI_RH10 5002
RH10_OVER_RUN ** 22 CONI_RH10 5007
RH10_POWER_FAIL ** 25 CONI_RH10 5010
RH10_RAE ** 29 CONI_RH10 5012
RH10_SELDR_ADR_E ** 10 CONI_RH10 4999
RH11_MBUS_CPE ** 13 RMCS1 5525
RH11_SPEC_COND ** 15 RMCS1 5523
RH11_XFER_ERROR ** 14 RMCS1 5524
RH20_ERR ** 10 CHAN_LOGOUT_1 5068
RH20_FLAG 4 11 TAPE_ERR_10 729
RHCS1_ERR 0 2-17 CSB_TM02 2471
RHCS1_ERR 5 20-35 MASSBUS_ERR_10 504
RHCS1_ERR 5 20-35 MASSBUS_ERR_20 1386
RHCS2_ERR 0 20-35 CSB_TM02 2472
RHCS2_ERR 5 2-17 MASSBUS_ERR_10 503
RHCS2_ERR 13 20-35 MASSBUS_ERR_20 1397
RH_CHAN_TYPE 2 15-17 MASSBUS_ERR_20 1369
RH_CHAN_TYPE 4 12-14 MASSBUS_ERR_10 499
RH_DATI_BAR_END 16 0-35 DX20_ERR_10 578
RH_DATI_BAR_END 16 0-35 MASSBUS_ERR_20 1402
RH_DATI_BAR_END 17 0-35 MASSBUS_ERR_10 527
RH_DATI_BAR_ERR 15 0-35 DX20_ERR_10 576
RH_DATI_BAR_ERR 15 0-35 MASSBUS_ERR_20 1399
RH_DATI_BAR_ERR 16 0-35 MASSBUS_ERR_10 525
RH_DATI_TCR_END 14 0-35 DX20_ERR_10 574
RH_DATI_TCR_END 14 0-35 MASSBUS_ERR_20 1398
RH_DATI_TCR_END 15 0-35 MASSBUS_ERR_10 523
RH_DATI_TCR_ERR 13 0-35 DX20_ERR_10 572
RH_DATI_TCR_ERR 13 0-35 MASSBUS_ERR_20 1396
RH_DATI_TCR_ERR 14 0-35 MASSBUS_ERR_10 520
RH_DEV_TYPE 2 31-35 MASSBUS_ERR_20 1370
RIB_ERRORS 6 12-23 OLD_DISK_STATS_10 843
RIB_ERRORS 7 12-23 DSCSBP 3988
RIB_ERRORS 7 12-23 MASSBUS_ERR_10 507
RILL 2 2-9 TM78_SENSE_BYTES 2835
RMC_CMD ** 7-0 RCMLP 3064
RMC_STATUS ** 7-0 RSTAT 3000
RMK2 2 28-35 TM78_SENSE_BYTES 2836
RMR ** 2 ER1 5334
RMR ** 2 RMER1 5566
RM_DCYL_NO ** 9-0 RMDC 5636
RM_TRACK ** 10-8 RMDA 5605
ROMPE ** 04 WMCERR 3718
ROM_PE ** 06 INTSTA 3753
RP10_CTL_PAR ** 14 CONI_RP10 465
RP10_ILL_DTO ** 27 CONI_RP10 475
RP10_ILL_WRT ** 26 CONI_RP10 474
RP10_MEM_PAR ** 16 CONI_RP10 467
RP10_NOT_RDY ** 25 CONI_RP10 473
RP10_NXM ** 23 CONI_RP10 472
RP10_OVR_RUN ** 22 CONI_RP10 471
RP10_PWR_FAL ** 20 CONI_RP10 469
RP10_SEC_ADD ** 28 CONI_RP10 476
RP10_SEC_PAR ** 15 CONI_RP10 466
RP10_SRH_ERR ** 21 CONI_RP10 470
RP10_SUR_ADD ** 29 CONI_RP10 477
RP10_WRD_PAR ** 17 CONI_RP10 468
RP20_CODED_ERR 4 24-27 DX20_DEVICE_REG 4404
RP20_DATA_CHECK ** 3 DT_SB_0 4443
RP20_FORMAT 1 28-31 DX20_DEVICE_REG 4396
RP20_FSC 5 20-35 DX20_DEVICE_REG 4411
RP20_HEAD ** 15-8 DM_HR 4366
RP20_MSG_CODE 1 32-35 DX20_DEVICE_REG 4397
RP20_OVERRUN ** 2 DT_SB_0 4444
RP20_RECORD ** 7-0 DM_HR 4367
RP4_30VU ** 12 ER2 5427
RP4_ACUN ** 15 ER2 5419
RP4_CCYL_NO ** 8-0 CC 5412
RP4_DCYL_NO ** 8-0 DC 5406
RP4_DEQ1 ** 5 DS 5311
RP4_DF20 ** 1 DS 5315
RP4_DF5 ** 0 DS 5316
RP4_DIGB ** 2 DS 5314
RP4_DLT64 ** 4 DS 5312
RP4_FA_EN ** 7 ER2 5442
RP4_FA_EN_6_AB_ST ** 7 ER2 5444
RP4_GOREV ** 3 DS 5313
RP4_MSE_6_RD_WR_UNSF ** 4 ER2 5452
RP4_NOT_6_35V ** 4 ER3 5486
RP4_PS_UN ** 0 ER3 5499
RP4_PS_UN_6_DC_UN ** 0 ER3 5501
RP4_UNSF ** 3 ER3 5489
RP4_VE_US ** 1 ER3 5494
RP4_VE_US_6_WR_OS ** 1 ER3 5496
RP6_35_VF ** 4 ER3 5485
RP6_AB_ST ** 7 ER2 5443
RP6_CCYL_NO ** 9-0 CC 5413
RP6_DCYL_NO ** 9-0 DC 5407
RP6_DC_UN ** 0 ER3 5500
RP6_OPER ** 13 ER3 5470
RP6_RP4_MSE ** 4 ER2 5450
RP6_WR_OS ** 1 ER3 5495
RP7_BSE ** 15 ER3 5466
RP7_CCYL_NO ** 9-0 CC 5414
RP7_CLF ** 11 ER3 5473
RP7_CPU ** 13 ER2 5425
RP7_CRM_PE ** 14 ER2 5422
RP7_DCU ** 5 ER3 5483
RP7_DPE ** 3 ER3 5490
RP7_DSE ** 13 ER3 5471
RP7_DVC ** 7 ER3 5477
RP7_ERR_CODE ** 7-0 ER2 5441
RP7_IVC ** 12 ER3 5472
RP7_IXU ** 6 ER3 5480
RP7_LBC ** 10 ER3 5474
RP7_LCE ** 9 ER3 5475
RP7_PGE ** 15 ER2 5420
RP7_PHF ** 8 ER3 5476
RP7_RTO ** 0 ER3 5502
RP7_RWU1 ** 10 ER2 5434
RP7_RWU2 ** 11 ER2 5431
RP7_RWU3 ** 12 ER2 5428
RP7_SBE ** 2 ER3 5492
RP7_SCF ** 1 ER3 5497
RP7_SDF ** 4 ER3 5487
RP7_SECTOR ** 6-0 DA 5371
RP7_TRACK ** 13-8 DA 5370
RP7_WOR ** 9 ER2 5437
RPATH 1 10-17 TM78_SENSE_BYTES 2830
RPE ** 06 ECCSTA 3279
RPFAIL 0 20-27 TM78_SENSE_BYTES 2829
RPOSTN 3 2-9 TM78_SENSE_BYTES 2839
RPSTA 3 10-17 TM78_SENSE_BYTES 2838
RQST_EXAM_DEP ** 4 CSR_REG 5188
RQST_INTER ** 5 CSR_REG 5189
RS04_AO ** 9 RSER 5286
RS04_DCK ** 15 RSER 5280
RS04_DTE ** 12 RSER 5283
RS04_IAE ** 10 RSER 5285
RS04_ILF ** 0 RSER 5290
RS04_ILR ** 1 RSER 5289
RS04_OPI ** 13 RSER 5282
RS04_PAR ** 3 RSER 5287
RS04_RMR ** 2 RSER 5288
RS04_UNS ** 14 RSER 5281
RS04_WLE ** 11 RSER 5284
RSP_QUEUE_AVAIL ** 28 CSR_REG 5208
RSTAT 1 2-9 TM78_SENSE_BYTES 2831
RTIER 6 20-27 TM78_SENSE_BYTES 2853
RUN_GO ** 14 RMMR1 5574
RX_EXCPT ** 12 RMMR1 5576
R_VOL_SER_NUMBER_1 9 0-7 MSCP_ERROR_PACKET 2095
R_VOL_SER_NUMBER_2 9 8-15 MSCP_ERROR_PACKET 2096
R_VOL_SER_NUMBER_3 9 16-23 MSCP_ERROR_PACKET 2097
R_VOL_SER_NUMBER_4 9 24-31 MSCP_ERROR_PACKET 2098
SAT_ERRORS 6 0-11 OLD_DISK_STATS_10 842
SAT_ERRORS 7 0-11 DSCSBP 3987
SAT_ERRORS 7 0-11 MASSBUS_ERR_10 506
SAVED_ACS 10 BODY MONITOR_BUG_DATA_20 1340
SAVED_ACS 16 BODY MONITOR_BUG_DATA_10 240
SBD0_ADD_PAR_ERROR ** 5 SBD0_DMA 4867
SBD0_BUS_MODE ** 6-7 SBD0_DMA 4868
SBD0_FIRST_ADDRESS ** 14-35 SBD0_DMA 4872
SBD0_LAST_REQ_BITS ** 8-11 SBD0_DMA 4869
SBD0_LAST_REQ_READ ** 12 SBD0_DMA 4870
SBD0_LAST_REQ_WRITE ** 13 SBD0_DMA 4871
SBD0_NXM ** 2 SBD0_DMA 4864
SBD0_READ_PAR_ERR ** 3 SBD0_DMA 4865
SBD0_WRITE_PAR_ERR ** 4 SBD0_DMA 4866
SBD1_CONTR_TYPE ** 8-11 SBDIAG_FUNCTION_1 4889
SBD1_HI_ADR_BOUND ** 22-25 SBD1_MA_MB 4899
SBD1_LOW_ADR_BOUND ** 18-21 SBD1_MA_MB 4898
SBD1_MARGINS_ON ** 30 SBD1_MA_MB 4900
SBD1_REQ_ENABLED ** 32-35 SBD1_MA_MB 4901
SBD1_SBUS_ADDRESS ** 14-17 SBD1_MA_MB 4897
SBDIAG_FUNCTION_0 1 0-35 SBDIAG_LIST 4699
SBDIAG_FUNCTION_1 2 0-35 SBDIAG_LIST 4700
SBDIAG_LIST 5 HEAD KL_PAR_NXM_INT_10 959
SBDIAG_LIST 9 HEAD CPU_PAR_INT_20 1639
SBDIAG_LIST 13 HEAD CPU_PAR_INT_10 1127
SBDIAG_LIST 98 HEAD KL_CPU_STATUS_10 1160
SBDIAG_LIST 98 HEAD KL_CPU_STATUS_20 1678
SBYTE_DET ** 9 MR 5342
SB_2_0 ** 7 DT_SB_2 4465
SDI_WRD_1 11 0-31 MSCP_ERROR_PACKET 2099
SDI_WRD_2 12 0-31 MSCP_ERROR_PACKET 2100
SDI_WRD_3 13 0-31 MSCP_ERROR_PACKET 2101
SECTOR ** 4-0 DA 5369
SECTOR ** 4-0 RMDA 5606
SECTOR_COUNT ** 10-6 LA 5386
SECT_CNT ** 10-6 RMLA 5618
SEC_CFL ** 29 CONI_STATUS 5029
SEEK_CNT 7 0-35 MASSBUS_ERR_20 1388
SEEK_INC ** 14 ER3 5468
SEEK_INC ** 14 RMER2 5653
SEEK_INC_CNT 4 0-35 OLD_DISK_STATS_10 836
SEEK_INC_CNT 5 18-35 DSCSBP 3981
SEEK_INC_CNT 8 18-35 MASSBUS_ERR_10 509
SEEN_BY_CHANNEL 11 0-35 NXM_MEMORY_SWEEP_10 1036
SEEN_BY_CHANNEL 13 0-35 OLD_CPU_NXM_ERR_10 283
SEQUENCE_NUM 1 16-31 MSCP_ERROR_PACKET 2046
SEQUENCE_NUMBER 4 9-35 HEADER 158
SERIAL_NO ** 15-0 SN 5392
SERIAL_NUMBER 3 20-35 CONFIG_CHANGE_20 1508
SERVER_LINE 2 MAIN$Z NODE_DOWN_LINE_DUMP 1742
SERVER_LINE 2 MAIN$Z NODE_DOWN_LINE_LOAD 1707
SERVER_NODE 1 MAIN$Z NODE_DOWN_LINE_DUMP 1741
SERVER_NODE 1 MAIN$Z NODE_DOWN_LINE_LOAD 1706
SER_ANR ** 7-0 SERA_NR 3840
SER_A_NR 12 20-27 TM78_SENSE_BYTES 2877
SER_BNR ** 7-0 SERB_NR 3848
SER_B_NR 13 10-17 TM78_SENSE_BYTES 2878
SER_CAS_10 8 0-17 TM78_CAS_REGS 2572
SER_CAS_10 8 18-35 TM78_CAS_REGS 2572
SER_NUM ** 15-0 RMSN 5623
SHADOW_STAT_1 8 16-23 MSCP_END_PACKET 1985
SHADOW_STAT_2 8 24-31 MSCP_END_PACKET 1986
SHADOW_UNIT_1 8 0-7 MSCP_END_PACKET 1983
SHADOW_UNIT_2 8 8-15 MSCP_END_PACKET 1984
SHORT_WCE ** 21 CONI_STATUS 5037
SHUNG_CNT 5 27-35 OLD_DISK_STATS_10 840
SHUNG_CNT 6 27-35 DSCSBP 3985
SHUNG_CNT 9 27-35 MASSBUS_ERR_10 513
SHWC ** 12 CHAN_LOGOUT_1 5076
SIGN_CNG ** 15 OF 5397
SIM_ATTN ** 34 DCR 5150
SIM_D_EXC ** 31 DCR 5148
SIM_EOB ** 32 DCR 5149
SIM_SCLK ** 35 DCR 5151
SING_CYC ** 4 DM_MR 4349
SOFTWARE ** 4 PAGE_FAIL_WORD 4798
SOFT_POS_ERR 30 0-35 DX20_ERR_10 593
SOFT_POS_ERR 35 0-35 MASSBUS_ERR_20 1432
SOFT_READ 17 0-35 DX20_ERR_10 580
SOFT_READ 19 0-35 MASSBUS_ERR_20 1408
SOFT_READ_ERRORS 4 0-35 OLD_TAPE_STATS_10 869
SOFT_WRITE 18 0-35 DX20_ERR_10 581
SOFT_WRITE 20 0-35 MASSBUS_ERR_20 1409
SOFT_WRITE_ERRORS 6 0-35 OLD_TAPE_STATS_10 871
SPARE_11 ** 11 CSR_REG 5193
SPARE_23 ** 23 CSR_REG 5203
SPEED ** 4-3 MIAB_STAT 3814
SPURIOUS_ERRORS 2 0-35 CPU_PAR_INT_10 1116
SPUR_SINCE_RELOAD 2 0-35 NXM_MEMORY_SWEEP_10 1027
SPUR_SINCE_RELOAD 2 0-35 OLD_CPU_MEM_PAR_ERR_10 253
SPUR_SINCE_RELOAD 2 0-35 OLD_CPU_NXM_ERR_10 272
SPUR_SINCE_RELOAD 2 0-35 PAR_MEMORY_SWEEP_10 1048
START_OF_INSTR 0 18-35 DEVICE_STATUS_10 1172
START_OF_RESULTS 1 18-35 DEVICE_STATUS_10 1174
STAT ** 00 CH0TIE 3288
STAT ** 00 CH1TIE 3302
STAT ** 00 CH2TIE 3317
STAT ** 00 CH3TIE 3333
STAT ** 00 CH4TIE 3349
STAT ** 00 CH5TIE 3365
STAT ** 00 CH6TIE 3380
STAT ** 00 CH7TIE 3396
STAT ** 00 CHPTIE 3411
STATUS_CODE 0 0-35 KS_HALT_STATUS_20 1568
STATUS_EVENT_CODE 2 16-31 MSCP_END_PACKET 1914
STATUS_EVENT_CODE 2 16-31 MSCP_ERROR_PACKET 2049
STATUS_VALID ** 06 RPATH 2989
STATUS_WORD_1 11 0-35 CSB_DX10 2409
STATUS_WORD_2 12 0-35 CSB_DX10 2414
STAT_EVNT_CODE_H 2 24-31 MSCP_END_PACKET 1916
STAT_EVNT_CODE_H 2 24-31 MSCP_ERROR_PACKET 2051
STAT_EVNT_CODE_L 2 16-23 MSCP_END_PACKET 1915
STAT_EVNT_CODE_L 2 16-23 MSCP_ERROR_PACKET 2050
STAT_PE ** 07 PSTAT 3462
STAT_SELECT ** 01 RPATH 2980
STA_AVAIL ** 07 STA_CAS_7 2743
STA_BOT ** 10 STA_CAS_7 2739
STA_CAS_7 7 0-17 TM78_CAS_REGS 2571
STA_CAS_7 7 18-35 TM78_CAS_REGS 2571
STA_DSE ** 04 STA_CAS_7 2749
STA_EOT ** 09 STA_CAS_7 2740
STA_FPT ** 08 STA_CAS_7 2742
STA_MAINT ** 05 STA_CAS_7 2747
STA_ON_L ** 13 STA_CAS_7 2732
STA_PE ** 11 STA_CAS_7 2735
STA_PRES ** 14 STA_CAS_7 2731
STA_RDY ** 15 STA_CAS_7 2728
STA_REWIND ** 12 STA_CAS_7 2734
STA_SHR ** 06 STA_CAS_7 2745
STD_STATUS 0 0-15 FE_SUB 4520
STEC ** 00 ECCSTA 3270
STI_WRD_1_1 11 0-7 MSCP_ERROR_PACKET 2151
STI_WRD_1_2 11 8-15 MSCP_ERROR_PACKET 2152
STI_WRD_1_3 11 16-23 MSCP_ERROR_PACKET 2153
STI_WRD_1_4 11 24-31 MSCP_ERROR_PACKET 2154
STI_WRD_2_1 12 0-7 MSCP_ERROR_PACKET 2156
STI_WRD_2_2 12 8-15 MSCP_ERROR_PACKET 2157
STI_WRD_2_3 12 16-23 MSCP_ERROR_PACKET 2158
STI_WRD_2_4 12 24-31 MSCP_ERROR_PACKET 2159
STI_WRD_3_1 13 0-7 MSCP_ERROR_PACKET 2161
STI_WRD_3_2 13 8-15 MSCP_ERROR_PACKET 2162
STI_WRD_3_3 13 16-23 MSCP_ERROR_PACKET 2163
STI_WRD_3_4 13 24-31 MSCP_ERROR_PACKET 2164
STOP ** 31 CONO 5172
STOP_BUG_NAME 9 0-35 MONITOR_BUG_DATA_10 233
STOP_BUG_NAME 32 0-35 MONITOR_BUG_DATA_20 1348
STORE_STAT ** 10 PTCR 5114
STORE_STAT ** 10 STCR 5098
STR_NAME 2 0-35 MASSBUS_ERR_10 491
SUM_HARD 4 1 DX20_ERR_10 559
SUM_HARD 4 1 MASSBUS_ERR_10 495
SUM_HARD 4 1 TAPE_ERR_10 727
SUM_HARD 18 2 MASSBUS_ERR_20 1407
SURF_SECT 24 0-35 MASSBUS_ERR_20 1414
SWEEP_BUSY ** 19 APR_STATUS 4766
SWEEP_DONE ** 31 APR_STATUS 4775
SWEEP_FLAG 4 4 CPU_PAR_TRAP_10 1095
SWEEP_FLAG 7 4 CPU_PAR_TRAP_20 1596
SWEEP_FLAG 9 4 KL_OR_KS_PAR_TRAP_10 1007
SWEEP_REF ** 2 RDERA_STATUS 4839
SYS_BUILD_DATE 0 0-35 LGR_DATA_BLOCK 2255
SYS_BUILD_DATE 1 0-35 SYSTEM_RELOAD_20 1301
SYS_BUILD_DATE 3 0-35 MONITOR_BUG_DATA_20 1326
SYS_BUILD_DATE 5 0-35 MONITOR_BUG_DATA_10 229
SYS_BUILD_DATE 5 0-35 SYSTEM_RELOAD_10 205
SYS_NAME 0 0-35 MONITOR_BUG_DATA_10 228
SYS_NAME 0 0-35 SYSTEM_RELOAD_10 204
SYS_NAME 0 MAIN$Z AVAIL_RELOAD 2284
SYS_NAME 0 MAIN$Z MONITOR_BUG_DATA_20 1321
SYS_NAME 0 MAIN$Z SYSTEM_RELOAD_20 1300
SYS_NAME 1 0-35 LGR_DATA_BLOCK 2256
SYS_SER_NUM 3 0-35 HEADER 155
SYS_STATES_WORD 7 0-35 SYSTEM_RELOAD_10 206
SYS_UPTIME 2 0-35 HEADER 153
S_BUS_ERROR ** 24 APR_STATUS 4768
TACH ** 03 TUDIAG 3865
TACK ** 03 PSTAT 3454
TAG 1 0-35 CSB_DX10 2383
TAMT 7 10-17 TM78_SENSE_BYTES 2854
TAPE_DRIVE ** 14 DT 5377
TAPE_UNIT 1 0-35 USAGE_DATA_20 1468
TAP_BYT_CNT_1 8 0-7 MSCP_END_PACKET 1979
TAP_BYT_CNT_2 8 8-15 MSCP_END_PACKET 1980
TAP_BYT_CNT_3 8 16-23 MSCP_END_PACKET 1981
TAP_BYT_CNT_4 8 24-31 MSCP_END_PACKET 1982
TAP_MRKS_SKIPD_1 4 0-7 MSCP_END_PACKET 1945
TAP_MRKS_SKIPD_2 4 8-15 MSCP_END_PACKET 1946
TAP_MRKS_SKIPD_3 4 16-23 MSCP_END_PACKET 1947
TAP_MRKS_SKIPD_4 4 24-31 MSCP_END_PACKET 1948
TARGET_NODE 0 MAIN$Z NODE_DOWN_LINE_DUMP 1740
TARGET_NODE 0 MAIN$Z NODE_DOWN_LINE_LOAD 1705
TERMINAL_LOC 4 0-35 SOFTWARE_EVENT_10 616
TERMINAL_NUMBER 0 18-35 ERROR_LOG 4485
TERMINAL_NUMBER 4 24-35 SOFTWARE_EVENT_10 619
TERMINAL_NUMBER 11 0-35 MONITOR_BUG_DATA_10 235
TERMINATION_WORD 5 0-35 CHANNEL_ERROR_REPORT_10 389
TEST_SBAR ** 28 DCR 5145
THUNG_CNT 5 9-17 OLD_DISK_STATS_10 838
THUNG_CNT 6 9-17 DSCSBP 3983
THUNG_CNT 9 9-17 MASSBUS_ERR_10 511
TIE_BUS_0 ** 0 RTIER 3426
TIE_BUS_1 ** 1 RTIER 3431
TIE_BUS_2 ** 2 RTIER 3432
TIE_BUS_3 ** 3 RTIER 3433
TIME_CHANGE 0 0-35 CONFIG_CHANGE_10 644
TIME_CHANGE 6 0-35 AVAIL_RELOAD 2290
TM ** 06 TUX 3911
TM10_BAD_TAP ** 28 TM10_TMS 2370
TM10_CMP_ERR ** 25 TM10_TMS 2367
TM10_CTL_PAR ** 11 TM10_TMS 2361
TM10_DAT_LAT ** 27 TM10_TMS 2369
TM10_ILL_OP ** 21 TM10_TMS 2365
TM10_LEN_ERR ** 26 TM10_TMS 2368
TM10_MEM_PAR ** 13 TM10_TMS 2363
TM10_NXM ** 12 TM10_TMS 2362
TM10_PAR_ERR ** 22 TM10_TMS 2366
TM10_TMC 0 0-35 CSB_TM10 2356
TM10_TMS 1 0-35 CSB_TM10 2357
TM10_UNI_HNG ** 18 TM10_TMS 2364
TM78_CAS_REGS_10 6 BODY CSB_TM78 2520
TM78_CAS_REGS_END_20 39 BODY MASSBUS_ERR_20 1450
TM78_CAS_REGS_ERR_20 39 BODY MASSBUS_ERR_20 1451
TM78_SENSE_BYTES_10 24 BODY CSB_TM78 2521
TM78_SENSE_BYTES_20 59 BODY MASSBUS_ERR_20 1453
TM78_U_CODE_REVS_10 0 BODY CSB_TM78 2514
TM78_U_CODE_REVS_20 57 BODY MASSBUS_ERR_20 1452
TMRDY ** 06 CASSTA 3488
TM_CBUS_PE ** 3 MB_ERR 5699
TM_DBUS_PE ** 5 MB_ERR 5697
TM_DR_T_ERROR ** 12 MB_ERR 5684
TM_FMT_ERROR ** 4 MB_ERR 5698
TM_F_C_ERR ** 9 MB_ERR 5689
TM_ILL_FUNC ** 0 MB_ERR 5702
TM_ILL_REG ** 1 MB_ERR 5701
TM_NRZI_CRC ** 15 MB_ERR 5680
TM_NRZI_ITM ** 10 MB_ERR 5687
TM_NRZI_LRC ** 7 MB_ERR 5692
TM_NRZI_VPE ** 6 MB_ERR 5695
TM_NXF ** 11 MB_ERR 5685
TM_N_STD_GAP ** 8 MB_ERR 5690
TM_OPER_INC ** 13 MB_ERR 5683
TM_PE_CORR ** 15 MB_ERR 5679
TM_PE_CORR_NRZI_CRC ** 15 MB_ERR 5681
TM_PE_CS ** 10 MB_ERR 5686
TM_PE_CS_NRZI_ITM ** 10 MB_ERR 5688
TM_PE_FE_NRZI_LRC ** 7 MB_ERR 5693
TM_PE_NDE ** 6 MB_ERR 5694
TM_PE_NDE_NRZI_VPE ** 6 MB_ERR 5696
TM_PE_PFE ** 7 MB_ERR 5691
TM_REG_MOD ** 2 MB_ERR 5700
TM_UNSAFE ** 14 MB_ERR 5682
TOPS20_REC 0 17 HEADER 140
TOP_TEN_BAD_ADD 6 HEAD PAR_MEMORY_SWEEP_10 1052
TOP_TEN_BAD_ADD 8 HEAD CPU_PAR_INT_10 1122
TOP_TEN_BAD_ADD 8 HEAD OLD_CPU_MEM_PAR_ERR_10 259
TOP_TEN_BAD_ADD 10 BODY CPU_PAR_INT_20 1641
TOP_TEN_BAD_ADD 15 HEAD NXM_MEMORY_SWEEP_10 1041
TOP_TEN_BAD_ADD 17 HEAD OLD_CPU_NXM_ERR_10 289
TOP_TEN_BAD_WORDS 20 BODY CPU_PAR_INT_20 1643
TOP_TEN_GOOD_WORDS 30 BODY CPU_PAR_INT_20 1645
TOTAL_READS 6 0-35 USAGE_DATA_20 1483
TOTAL_SEEKS 8 0-35 USAGE_DATA_20 1485
TOTAL_SINCE_RELOAD 1 0-35 NXM_MEMORY_SWEEP_10 1026
TOTAL_SINCE_RELOAD 1 0-35 OLD_CPU_MEM_PAR_ERR_10 252
TOTAL_SINCE_RELOAD 1 0-35 OLD_CPU_NXM_ERR_10 271
TOTAL_SINCE_RELOAD 1 0-35 PAR_MEMORY_SWEEP_10 1047
TOTAL_SWEEPS 3 0-35 PAR_SWEEP_DATA 4653
TOTAL_SWEEPS 9 0-35 OLD_CPU_NXM_ERR_10 279
TOTAL_THIS_SWEEP 6 0-35 NXM_MEMORY_SWEEP_10 1031
TOTAL_THIS_SWEEP 8 0-35 OLD_CPU_NXM_ERR_10 278
TOTAL_WRITES 7 0-35 USAGE_DATA_20 1484
TO_10_POINTER 1 0-35 DTE_BLOCK 4017
TO_11_POINTER 0 0-35 DTE_BLOCK 4016
TPE_RETRY_1 8 16-23 MSCP_ERROR_PACKET 2142
TPE_RETRY_2 8 24-31 MSCP_ERROR_PACKET 2143
TPORT2_RD_EN ** 5 TUSEL1 3613
TPORT2_WR_EN ** 3 TUSEL1 3607
TPORT3_RD_EN ** 4 TUSEL1 3610
TPORT3_WR_EN ** 2 TUSEL1 3604
TPSHRE 5 0-35 TAPE_STATS_10 888
TPSHWE 7 0-35 TAPE_STATS_10 890
TPSLAB 9 0-35 TAPE_STATS_10 892
TPSNAM 0 0-35 TAPE_STATS_10 883
TPSPPN 8 0-35 TAPE_STATS_10 891
TPSRID 1 0-35 TAPE_STATS_10 884
TPSSRE 4 0-35 TAPE_STATS_10 887
TPSSWE 6 0-35 TAPE_STATS_10 889
TPSUSN 10 0-35 TAPE_STATS_10 893
TPSUTP 11 0-35 TAPE_STATS_10 894
TPSWRC 2 0-35 TAPE_STATS_10 885
TPSWWC 3 0-35 TAPE_STATS_10 886
TRACK ** 12-8 DA 5368
TRANS ** 05 WMCSTA 3551
TRAN_DET_F ** 5 ER2 5448
TRAN_UNSF ** 6 ER2 5446
TRAP_ENABLE ** 22 PAGE_STATUS 4821
TRK_SIZ_1 9 0-7 MSCP_END_PACKET 1992
TRK_SIZ_2 9 8-15 MSCP_END_PACKET 1993
TTEC ** 01 ECCSTA 3271
TUDIAG 13 2-9 TM78_SENSE_BYTES 2879
TUNIT_SEL1 ** 1 - TUSEL1 3600
TUPRES ** 04 PSTAT 3455
TUSEL0 8 20-27 TM78_SENSE_BYTES 2861
TUSEL1 9 10-17 TM78_SENSE_BYTES 2862
TUSTAT 12 10-17 TM78_SENSE_BYTES 2874
TUX 14 10-17 TM78_SENSE_BYTES 2882
TU_AMTIE ** 7-0 TAMT 3441
UBADDR_EXT ** 9-8 RMCS1 5529
UBA_MAP 2 0-35 CSB_TM02 2482
UBA_MAP_END 16 18-35 MASSBUS_ERR_20 1404
UBA_MAP_ERR 16 18-35 MASSBUS_ERR_20 1401
UBA_STATUS 1 0-35 CSB_TM02 2478
UBA_STATUS_END 16 0-17 MASSBUS_ERR_20 1403
UBA_STATUS_ERR 1 18-35 CSB_TM02 2479
UBA_STATUS_ERR 14 18-35 MASSBUS_ERR_10 522
UBA_STATUS_ERR 16 0-17 MASSBUS_ERR_20 1400
UBA_STAT_ACDC_LO ** 26 UBA_STATUS 5234
UBA_STAT_BAD_MDATA ** 19 UBA_STATUS 5229
UBA_STAT_BUS_PE ** 20 UBA_STATUS 5230
UBA_STAT_DIS_XFR ** 28 UBA_STATUS 5235
UBA_STAT_HIGH_PI ** 30-32 UBA_STATUS 5237
UBA_STAT_HI_INT ** 24 UBA_STATUS 5232
UBA_STAT_INIT_UBA ** 29 UBA_STATUS 5236
UBA_STAT_LOW_PI ** 33-35 UBA_STATUS 5238
UBA_STAT_LO_INT ** 25 UBA_STATUS 5233
UBA_STAT_NXD ** 21 UBA_STATUS 5231
UBA_STAT_TIME_OUT ** 18 UBA_STATUS 5228
UBUS_PE ** 13 RH11_RMCS2 5245
UCODE_1 0 0-35 TM78_U_CODE_REVS 2530
UCODE_2 1 0-35 TM78_U_CODE_REVS 2531
UCODE_EDIT 3 6-17 CSB_DX10 2387
UCODE_VER 1 18-35 KLIPA 2188
UCODE_VER 1 18-35 KLIPA_STATISTICS 1849
UCODE_VERSION 3 0-5 CSB_DX10 2386
UDB_JOB0 17 0-35 MASSBUS_ERR_20 1405
UHVRSN 8 8-15 MSCP_ERROR_PACKET 2068
UNC ** 02 ECCSTA 3272
UNICER 10 24-35 OLD_DISK_ERR_10 432
UNINTH 12 0-8 OLD_DISK_ERR_10 435
UNIPHU 12 18-26 OLD_DISK_ERR_10 437
UNIRER 10 12-23 OLD_DISK_ERR_10 431
UNISER 10 0-11 OLD_DISK_ERR_10 430
UNISHU 12 27-35 OLD_DISK_ERR_10 438
UNITHU 12 9-17 OLD_DISK_ERR_10 436
UNIT_ADDR 34 0-35 MASSBUS_ERR_20 1427
UNIT_CLASS 7 24-31 MSCP_ERROR_PACKET 2066
UNIT_DEV_NUM_H 7 0-15 MSCP_ERROR_PACKET 2064
UNIT_DEV_NUM_L 6 0-31 MSCP_ERROR_PACKET 2063
UNIT_FLAGS_1 3 16-23 MSCP_END_PACKET 1938
UNIT_FLAGS_2 3 24-31 MSCP_END_PACKET 1939
UNIT_ID_H 7 0-31 MSCP_ERROR_PACKET 2062
UNIT_ID_L 6 0-31 MSCP_ERROR_PACKET 2061
UNIT_MODEL 7 16-23 MSCP_ERROR_PACKET 2065
UNIT_NUMBER 1 0-15 MSCP_END_PACKET 1908
UNIT_NUMBER 1 0-15 MSCP_ERROR_PACKET 2042
UNIT_NUMBER 3 15-17 CONFIG_CHANGE_20 1507
UNIT_NUMBER 5 32-35 USAGE_DATA_20 1481
UNIT_NUMBER 34 32-35 MASSBUS_ERR_20 1430
UNIT_NUMBER_H 1 8-15 MSCP_END_PACKET 1910
UNIT_NUMBER_H 1 8-15 MSCP_ERROR_PACKET 2045
UNIT_NUMBER_L 1 0-7 MSCP_END_PACKET 1909
UNIT_NUMBER_L 1 0-7 MSCP_ERROR_PACKET 2044
UNIT_SEL ** 2-0 RH11_RMCS2 5256
UNIT_SIZ_1 9 0-7 MSCP_END_PACKET 1988
UNIT_SIZ_2 9 8-15 MSCP_END_PACKET 1989
UNIT_SIZ_3 9 16-23 MSCP_END_PACKET 1990
UNIT_SIZ_4 9 24-31 MSCP_END_PACKET 1991
UNIT_TYPE 1 31-35 CONFIG_CHANGE_20 1502
UNIT_TYPE 16 30-32 OLD_DISK_ERR_10 447
UNK_DEV_FLAG 4 0 FE_DATA 4503
UNLIKELY_CODE 12 0-17 SYSTEM_RELOAD_10 214
UNLIKELY_CODE 14 0-17 OLD_CPU_NXM_ERR_10 284
UNSAFE ** 14 ER1 5322
UNT_NUMBER 5 32-35 USAGE_DATA_20 1480
UNT_NUMBER 34 32-35 MASSBUS_ERR_20 1429
UN_SAFE ** 14 RMER1 5554
UPT_503 89 0-35 KL_CPU_STATUS_10 1157
UPT_PAGE ** 23-35 PAGE_DATAI 4786
USAGE_EVENT 0 0-35 USAGE_DATA_20 1464
USCBRC 7 0-35 OLD_DISK_STATS_10 845
USCBWC 8 0-35 OLD_DISK_STATS_10 846
USCDRC 9 0-35 OLD_DISK_STATS_10 847
USCDWC 10 0-35 OLD_DISK_STATS_10 848
USCHCT 2 0-35 OLD_DISK_STATS_10 834
USCHID 1 0-35 OLD_DISK_STATS_10 833
USCHNG 5 0-35 OLD_DISK_STATS_10 837
USCICT 13 0-35 OLD_DISK_STATS_10 851
USCMCT 6 0-35 OLD_DISK_STATS_10 841
USCMRC 11 0-35 OLD_DISK_STATS_10 849
USCMSC 15 0-35 OLD_DISK_STATS_10 853
USCMWC 12 0-35 OLD_DISK_STATS_10 850
USCNAM 0 0-35 OLD_DISK_STATS_10 832
USCOCT 14 0-35 OLD_DISK_STATS_10 852
USCSCT 3 0-35 OLD_DISK_STATS_10 835
USCUSC 16 0-35 OLD_DISK_STATS_10 854
USER 9 0-35 OLD_TAPE_STATS_10 874
USER 11 0-35 DX20_ERR_10 570
USER 11 0-35 MASSBUS_ERR_20 1394
USER_ENABLED_COUNT 4 0-35 PAR_SWEEP_DATA 4654
USER_ID 1 0-35 ERROR_LOG 4486
USER_ID 2 0-35 SOFTWARE_EVENT_10 614
USER_ID 3 0-35 CPU_PAR_TRAP_20 1587
USER_ID 6 0-35 KL_OR_KS_PAR_TRAP_10 1000
USER_ID 7 0-35 MONITOR_BUG_DATA_20 1337
USER_ID 9 0-35 CPU_PAR_INT_10 1123
USER_ID 9 0-35 OLD_CPU_MEM_PAR_ERR_10 260
USER_ID 13 0-35 MONITOR_BUG_DATA_10 237
USER_ID 18 0-35 OLD_CPU_NXM_ERR_10 290
USVRSN 8 0-7 MSCP_ERROR_PACKET 2067
U_STATUS 2 0-35 KLIPA 2189
V5OK ** 01 CBUSSTA 3504
VALID_VOL ** 6 DS 5310
VALID_VOL ** 6 RMDS 5547
VECT_INTR_ADDR ** 27-35 IVIR 5123
VEL_OK ** 07 RPATH 2991
VIRTUAL ** 8 PAGE_FAIL_WORD 4802
VIRTUAL_ADDRESS ** 18-35 PAGE_FAIL_WORD 4813
VOLUME_ID 2 0-35 USAGE_DATA_20 1470
VOL_ID 1 0-35 MASSBUS_ERR_10 490
VOL_ID 1 0-35 MASSBUS_ERR_20 1367
VOL_SERIAL_NUM 9 0-31 MSCP_ERROR_PACKET 2070
WCSP ** 02 PSTAT 3453
WD_CNT 5 0-17 FE_DATA 4507
WFAIL_0 ** 00 RPFAIL 2914
WFAIL_1 ** 01 RPFAIL 2921
WFAIL_2 ** 02 RPFAIL 2928
WFAIL_3 ** 03 RPFAIL 2935
WFAIL_4 ** 04 RPFAIL 2942
WFAIL_5 ** 05 RPFAIL 2949
WFAIL_6 ** 06 RPFAIL 2956
WFAIL_7 ** 07 RPFAIL 2964
WHO_ANSWER 2 0-35 ERROR_LOG 4487
WHY_RELOAD_CODE 4 MAIN$Z SYSTEM_RELOAD_20 1306
WHY_RELOAD_CODE 10 0-35 SYSTEM_RELOAD_10 211
WMCERR 11 28-35 TM78_SENSE_BYTES 2872
WMCSCLK ** 01 DBUSSTA 3524
WMCSTA 8 28-35 TM78_SENSE_BYTES 2860
WMC_NOT_DONE ** 06 WMCSTA 3553
WORD1 0 0-35 TOP_TEN 4720
WORD10 9 0-35 TOP_TEN 4729
WORD2 1 0-35 TOP_TEN 4721
WORD3 2 0-35 TOP_TEN 4722
WORD4 3 0-35 TOP_TEN 4723
WORD5 4 0-35 TOP_TEN 4724
WORD6 5 0-35 TOP_TEN 4725
WORD7 6 0-35 TOP_TEN 4726
WORD8 7 0-35 TOP_TEN 4727
WORD9 8 0-35 TOP_TEN 4728
WORD_COUNT ** 15-0 RH11_RMWC 5271
WORD_NUMBER ** 0-1 RDERA_STATUS 4838
WRB4 ** 07 TUDIAG 3869
WRC_SEL ** 2-0 XFRCTL 3923
WRITEABLE ** 3 PAGE_FAIL_WORD 4797
WRITE_DATA ** 3 RMMR1 5585
WRITE_EP ** 3 DM_MR 4348
WRITE_EVEN_ADR_PAR ** 18 PI_STATUS 4828
WRITE_EVEN_DATA_PAR ** 19 PI_STATUS 4829
WRITE_EVEN_DIR_PAR ** 20 PI_STATUS 4830
WRITE_FAIL_P ** 00 RPATH 2978
WRITE_INHIBIT ** 1 DT_SB_1 4458
WRITE_LOCK ** 11 DS 5305
WRITE_LOCK ** 11 RMDS 5542
WRITE_REF ** 5 PAGE_FAIL_WORD 4799
WRITE_UNS ** 8 ER2 5439
WRT ** 04 MIAA_STAT 3793
WRTDAT 9 2-9 TM78_SENSE_BYTES 2863
WRT_TAPE ** 05 TUX 3909
WR_CK_ERROR ** 14 RH11_RMCS2 5244
WR_CK_FAIL ** 5 ER1 5331
WR_CK_FAIL ** 5 RMER1 5563
WR_C_UNSF ** 0 ER2 5460
WR_DATA ** 7-0 WRTDAT 3624
WR_DATA_REG_P ** 04 INTSTA 3746
WR_DATA_STROBE ** 06 PSTAT 3461
WR_GCR 14 0-35 USAGE_DATA_20 1491
WR_INH ** 03 MIAA_STAT 3792
WR_LK_ERROR ** 11 ER1 5325
WR_LK_ERROR ** 11 RMER1 5557
WR_NRZI 12 0-35 USAGE_DATA_20 1489
WR_PE 13 0-35 USAGE_DATA_20 1490
W_SEL_UNSF ** 2 ER2 5456
XFER_SIG ** 26 DCR 5143
XFRCTL 14 2-9 TM78_SENSE_BYTES 2883
XMC_NOT_DONE ** 07 WMCSTA 3560
XMC_WCLK ** 00 WMCSTA 3538
XMIT_NODE_ID 0 0-17 NET_HARDWARE_ERR 1751
XMIT_NODE_NAME 1 MAIN$Z NET_HARDWARE_ERR 1753
XRETRY 14 28-35 TM78_SENSE_BYTES 2884
X_RETRY ** 7 - XRETRY 3949
X_ROMPE ** 00 INTSTA 3737
ZERO_DET ** 8 MR 5343
_BODY_FORMAT 0 18-20 _HEADER 169
_CRASH_EXTRACT 0 16 _HEADER 167
_ENTRY_DATE_TIME 1 0-35 _HEADER 176
_ENTRY_LENGTH 0 27-35 _HEADER 175
_ENTRY_TYPE 0 0-8 _HEADER 164
_HDR_FORMAT 0 21-23 _HEADER 171
_HDR_LENGTH 0 24-26 _HEADER 173
_HDR_WRD_0 0 0-35 _HEADER 163
_RDFILE_SEQNUM 4 0 _HEADER 184
_RETRIEVE_EXTRACT 0 15 _HEADER 166
_SEQUENCE_NUMBER 4 9-35 _HEADER 186
_SYS_SER_NUM 3 0-35 _HEADER 183
_SYS_UPTIME 2 0-35 _HEADER 181
_TOPS20_REC 0 17 _HEADER 168