Trailing-Edge
-
PDP-10 Archives
-
bb-h138f-bm
-
7-sources/rmsfnd.b36
There are 6 other files named rmsfnd.b36 in the archive. Click here to see a list.
%title 'F I N D E R -- $FIND service routines'
!<BLF/REQUIRE 'RMSBLF.REQ'>
MODULE finder (IDENT = '3.0'
) =
BEGIN
!
! COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1984, 1986.
! ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND
! COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH
! THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR
! ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE
! AVAILABLE TO ANY OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE
! SOFTWARE IS HEREBY TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT
! NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL
! EQUIPMENT CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF
! ITS SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!
!++
! FACILITY: RMS
!
! ABSTRACT:
!
! FINDER contains all routines which process
! the $FIND service in RMS-20.
!
! ENVIRONMENT: User mode, Top level
!
! AUTHOR: Ron Lusk , CREATION DATE: 1-Apr-83
!
! MODIFIED BY:
!
! Ron Lusk, 7-Jul-83 : VERSION 2
! 01 - Return relative record's page number in LSN if FB$SMU is set.
! 420 - Use global addressing in fetching key buffer contents.
! Andrew Nourse Version 3
! 501 - Implement remote FIND
! 504 - Implement Image mode FIND
! 565 - (RL) Return STV from FFF calls
!--
!
! TABLE OF CONTENTS
!
!
! $FIND - dispatcher for $FIND service
! FINDASC - $FIND for ASCII files
! FINDIMA - $FIND for IMAGE files
! FINDSEQ - $FIND for Sequential files
! FINDREL - $FIND for Relative files
! FINDIDX - $FIND for Indexed files
!
!
! INCLUDE FILES:
!
REQUIRE 'rmsreq';
!
! MACROS:
!
! None.
!
! EQUATED SYMBOLS:
!
! None.
!
! OWN STORAGE:
!
! None.
!
! EXTERNAL REFERENCES:
!
EXTERNAL ROUTINE
F$Find;
%SBTTL '$FIND - $FIND dispatcher'
GLOBAL ROUTINE $find (rabblock, errorreturn) =
!++
! FUNCTIONAL DESCRIPTION:
!
! $FIND performs all processing of a $FIND macro. It
! is not called directly by any other routine within
! RMS-20, but is called only from the primary RMS
! dispatcher.
!
! FORMAL PARAMETERS
!
! RABBLOCK - address of user Record Access Block
! RABISI - Internal stream identifier
! RABKBF - key buffer address (REL/IDX)
! RABKRF - key of reference (IDX)
! RABKSZ - size of key in buffer (IDX)
! RABRAC - record access
! RABRFA - record's file address (RFA access)
! RABROP - record options
! RAH - Read-Ahead
! KGT - Key greater than (IDX)
! KGE - Key greater than or equal to (IDX)
!
! * RAB fields output *
!
! RABBKT - relative record number of target (REL)
! RABRFA - record's file address
! RABSTS - status of operation
! RABSTV - secondary status
!
! ERRORRETURN - address of user error routine
!
! IMPLICIT INPUTS
!
! ?
!
! ROUTINE VALUE:
!
! None, yet not novalue.
!
! SIDE EFFECTS:
!
! ?
!
!--
BEGIN
LOCAL
!
! Data blocks for indexed files
recdesc : BLOCK [rdsize], ! Record descriptor
databd : BLOCK [bdsize]; ! Bucket descriptor
rmsentry ($find);
!+
! Fetch the user's RAB and error address.
!-
rab = .rabblock; ! Get RAB address
erradr = .errorreturn; ! and user error address
rsetup (true); ! A $FIND is legal always
!+
! Check for a remote file. If it is use the DAP routine instead.
!-
IF .Fst[Fst$v_Remote]
THEN !m555
Dap$Find( .Rab, .erradr )
ELSE
!+
! We now can dispatch to the correct routine to locate the
! target record. Notice that for all file organizations
! except indexed, all parameters are stored in the Record
! Status Table. For indexed files, however, we must pass
! a Record Descriptor and a Bucket Descriptor. These
! arguments are not used by this routine, but since they
! are required for $GET, they will be passed fo FINDIDX.
!-
CASE fileorg FROM 0 TO Fab$k_Idx OF
SET
[0] : ! Non-RMS file
SELECT .Fst[Fst$h_File_Class] OF !a504 vv
SET
[0, Typ$k_Ascii]:
findasc ( true ); ! ASCII !m575
[Typ$k_Image, Typ$k_Byte]:
findima ( true ); ! IMAGE !m575
[OTHERWISE]:
BEGIN
F$Find( .Rab ); !m524
usrstv = .rab [rab$h_stv]; ! Return STV value !A565
IF NOT $Rms_Status_Ok( .Rab ) !a524
THEN Usererror( .Rab[Rab$h_Sts] ); !a524
END;
TES; !a504 ^^
[Fab$k_Seq] :
findseq (); ! Sequential
[Fab$k_Rel] :
findrel (); ! Relative
[Fab$k_Idx] :
findidx (recdesc, databd) ! Indexed
TES;
setsuccess;
usrret () ! Exit to user
END; ! End of $FIND
%SBTTL 'FINDASC - $FIND for ASCII'
GLOBAL ROUTINE findasc ( eofcheck ) =
!++
! FUNCTIONAL DESCRIPTION:
!
! Processes $FIND service for ASCII file.
!
! FORMAL PARAMETERS
!
! EofCheck: Check for end-of-file if nonzero
!
! IMPLICIT INPUTS
!
! RSTDATARFA - byte number of current record
! RSTRSZ - size in bytes of current record
!
! ROUTINE VALUE:
!
! None.
!
! SIDE EFFECTS:
!
! ?
!
!--
BEGIN
LOCAL
sizeoflastrecrd,
temp;
TRACE ('FINDASC');
!+
! RFA access:
!-
![2] Using RFA from RAB, set up buffer, count, and pointers
IF rfaadr
THEN
BEGIN
LOCAL
pagenum,
rfanum,
pagebyte;
! Clear End-Of-File, this is random access
rst [rstflags] = .rst [rstflags] AND NOT flgeof;
rst [rstdatarfa] = rfanum = .rab [rabrfa, 0];
pagenum = .rfanum/ch_in_p; ! Get page number
pagebyte = .rfanum MOD ch_in_p; ! and byte within page
rst [rstnrp] = .pagenum;
readbuffer ();
! Read page containing start of record
! Point page pointer to correct place in buffer
rst [rstpagptr] = CH$PLUS (.rst [rstpagptr], .pagebyte);
! Is RFA past end of file? If so, give EOF error
IF .EofCheck AND (.rst [rstbytecount] LSS .pagebyte) !m575
THEN usererror (er$eof); ! Record not found
! Update byte count
rst [rstbytecount] = .rst [rstbytecount] - .pagebyte;
RETURN true;
END;
!+
! SEQuential access:
!-
!+
! If we are at EOF, then don't try finding a record.
!-
IF .EofCheck AND endoffile THEN usererror (er$eof); !m575
!+
! If the last RMS operation issued was a $FIND, or if the
! last record fetched was too big for the user's buffer
! (i.e., "partial" record), then we must skip a record and
! position ourselves to the next one. In all other cases
! (i.e., the last JSYS was a $OPEN or $GET), we are
! already positioned at the correct place.
!
! This module also must insure that the current record's
! starting address is maintained correctly. This
! procedure varies depending upon the current file
! context. For instance, if two successive $FINDs are
! done, a record must be skipped and its length added to
! the starting address of the last record. If the last
! record access was a "partial" record, the length of that
! record must be added to its starting address, then the
! rest of the record must be skipped and the amount that
! was skipped also added into the current RFA address.
!
! For normal conditions (i.e., a $FIND is done after a
! successful $GET or $FIND), then the length of the last
! record (i.e., current record to the user) must be added
! to its starting byte number to produce the address of
! the next record, which then immediately becomes the
! current record. This entire process must also be done
! for sequenced files, except all bytes are in terms of
! words and the line-number must be accounted for in
! certain calculations.
!-
IF (.rst [rstlastoper] EQL c$find) OR ! If last RMS call was a $FIND
(partialflag NEQ 0) ! or last record was too big.
THEN
BEGIN ! To skip a record
IF partialflag NEQ 0
THEN ! We must update current RFA
BEGIN
sizeoflastrecrd = .rst [rstrsz]; ! Get last record's size
! Compute start of this record
rst [rstdatarfa] = .rst [rstdatarfa] + .sizeoflastrecrd;
lookat (' SIZEOFLAST: ', sizeoflastrecrd)
END;
rst [rstrsz] = getascii (false); ! Skip a record
clrflag (rst [rstflags], flgpartial); ! Clear the partial flag
END;
!+
! We must now update the RFA to point to the current
! record's starting address.
!-
rst [rstdatarfa] = ! Compute start of next record
.rst [rstdatarfa] + .rst [rstrsz];
!+
! If this is a sequenced file, and if we need to update
! the file pointer (such as on a $FIND-$FIND sequence),
! then we must now move the file position to the next full
! word in the file.
!-
IF sequenced AND (chkflag (rst [rstflags], flgupdptr) NEQ 0)
THEN
BEGIN ! Move to next full word
temp = (5 - .rst [rstdatarfa] MOD 5) MOD 5;
rst [rstdatarfa] = .rst [rstdatarfa] + .temp;
rst [rstbytecount] = .rst [rstbytecount] - .temp;
temp = .rst [rstpagptr]; ! Get sub-field
IF .temp<30, 6> NEQ 36 ! Word-aligned already?
THEN
rst [rstpagptr] = POINT (.rst [rstpagptr] + 1, 36, 7);
!+
! Clear the "update the pointer" flag.
!-
clrflag (rst [rstflags], flgupdptr)
END;
!+
! Return RFA to user
!-
rab [rabrfa, 0] = .rst [rstdatarfa]; ![2] Return RFA to user
RETURN true
END; ! End of FINDASC
%SBTTL 'FINDIMA - $FIND for IMAGE'
GLOBAL ROUTINE findima ( EofCheck ) =
!++
! FUNCTIONAL DESCRIPTION:
!
! Processes $FIND service for IMAGE file.
!
! FORMAL PARAMETERS
!
! EofCheck: Check for end-of-file if nonzero
!
! IMPLICIT INPUTS
!
! RSTDATARFA - byte number of current record
! RSTRSZ - size in bytes of current record
!
! ROUTINE VALUE:
!
! None.
!
! SIDE EFFECTS:
!
! ?
!
!--
BEGIN
LOCAL
sizeoflastrecrd,
temp;
TRACE ('FINDIMA');
!+
! RFA access:
!-
![2] Using RFA from RAB, set up buffer, count, and pointers
IF rfaadr
THEN
BEGIN
LOCAL
pagenum,
rfanum,
bytesperpage,
pagebyte;
! Check if last oper was sequential write
! If so flush buffer
IF (.rst[rst$v_last_operation] EQL C$Put)
AND .rst[rst$v_last_sequential]
THEN WriteBuffer();
rst[rst$v_eof] = 0; ! this is random access
rst [rstdatarfa] = rfanum = .rab [rabrfa, 0];
bytesperpage = %BPVAL/.Fst[Fst$h_Bsz]*pagesize;
pagenum = .rfanum/.bytesperpage; ! Get page number
pagebyte = .rfanum MOD .bytesperpage; ! and byte within page
rst [rstnrp] = .pagenum;
readbuffer ();
! Read page containing start of record
! Point page pointer to correct place in buffer
rst [rstpagptr] = CH$PLUS (.rst [rstpagptr], .pagebyte);
! Is RFA past end of file? If so, give EOF error
IF .EofCheck AND (.rst [rstbytecount] LSS .pagebyte) !m575
THEN usererror (er$eof); ! Record not found
! Update byte count
rst [rstbytecount] = .rst [rstbytecount] - .pagebyte;
rst[rst$v_last_sequential] = 0; ! This is not sequential
RETURN true;
END;
!+
! SEQuential access:
!-
rst[rst$v_last_sequential] = 1; ! This is sequential !a577
!+
! If we are at EOF, then don't try finding a record.
!-
IF .EofCheck AND EndofFile THEN usererror (er$eof); !m575
!+
! If the last RMS operation issued was a $FIND, or if the
! last record fetched was too big for the user's buffer
! (i.e., "partial" record), then we must skip a record and
! position ourselves to the next one. In all other cases
! (i.e., the last JSYS was a $OPEN or $GET), we are
! already positioned at the correct place.
!
! This module also must insure that the current record's
! starting address is maintained correctly. This
! procedure varies depending upon the current file
! context. For instance, if two successive $FINDs are
! done, a record must be skipped and its length added to
! the starting address of the last record. If the last
! record access was a "partial" record, the length of that
! record must be added to its starting address, then the
! rest of the record must be skipped and the amount that
! was skipped also added into the current RFA address.
!
! For normal conditions (i.e., a $FIND is done after a
! successful $GET or $FIND), then the length of the last
! record (i.e., current record to the user) must be added
! to its starting byte number to produce the address of
! the next record, which then immediately becomes the
! current record. This entire process must also be done
! for sequenced files, except all bytes are in terms of
! words and the line-number must be accounted for in
! certain calculations.
!-
IF (.rst [rstlastoper] EQL c$find) OR ! If last RMS call was a $FIND
(partialflag NEQ 0) ! or last record was too big.
THEN
BEGIN ! To skip a record
IF partialflag NEQ 0
THEN ! We must update current RFA
BEGIN
sizeoflastrecrd = .rst [rstrsz]; ! Get last record's size
! Compute start of this record
rst [rstdatarfa] = .rst [rstdatarfa] + .sizeoflastrecrd;
lookat (' SIZEOFLAST: ', sizeoflastrecrd)
END;
rst [rstrsz] = getimage (false); ! Skip a record
clrflag (rst [rstflags], flgpartial); ! Clear the partial flag
END;
!+
! We must now update the RFA to point to the current
! record's starting address.
!-
rst [rstdatarfa] = ! Compute start of next record
.rst [rstdatarfa] + .rst [rstrsz];
!+
! Return RFA to user
!-
rab [rabrfa, 0] = .rst [rstdatarfa]; ![2] Return RFA to user
RETURN true
END; ! End of FINDIMA
%SBTTL 'FINDSEQ - $FIND for sequential file'
GLOBAL ROUTINE findseq =
!++
! FUNCTIONAL DESCRIPTION:
!
! FINDSEQ processes the $FIND service for RMS
! sequential files.
!
! This routine exits directly to the user on an error.
!
! FORMAL PARAMETERS
!
! None.
!
! IMPLICIT INPUTS
!
! RSTDATARFA - byte number of current record
! RSTRSZ - size in bytes of current record
!
! ROUTINE VALUE:
!
! None, yet not NOVALUE.
!
! SIDE EFFECTS:
!
! ?
!
!--
BEGIN
LOCAL
temp1,
recordlength,
crp : BLOCK [1], ! Byte number of current record
rfapagenum, ! Page number of current record
nrp, ! Byte number of next record
bytesword, ! Number of bytes in one word
header : BLOCK [1], ! Storage for record header
checkpageflag, ! On for RFA addressing,
! off for sequential
valid; ! Flag for exit from loop
REGISTER
tempac;
TRACE ('FINDSEQ');
!+
! For sequential access, we can assume the next page exists unless
! the current record address points to the top of a page, in which
! case we must check for that page. However, for RFA or relative
! addressing, we must check if the target page exists because if the
! file is only being read, we will get an illegal instruction trap
! if the page doesn't exist. We can also clear the user's RFA field
! unless he is using RFA addressing.
!-
checkpageflag = false;
IF seqadr !m567
THEN
BEGIN
rab [rabrfa, 0] = 0; ! Clear the RFA field
tempac = .rst [rstnrp]; ! Next record pointer
IF (.tempac^w2p)^p2w EQL .tempac ! Top of new page
THEN
checkpageflag = true; ! Check for EOF
END
ELSE ! Must be sequential addressing
checkpageflag = true; ! Check for RFA addressing
!+
! This is the main loop. It continues until any of the
! following are found:
!
! 1) Record unavailable
! 2) EOF
! 3) Valid record found
!
!-
valid = false; ! Set flag as invalid
WHILE .valid EQL false DO
BEGIN
!+
! Fetch the user's record-access parameter (RAC) and use
! it to determine the location of the next record.
!
!-
!+
! Save the current record address.
!-
CASE recordaccess FROM RAB$K_SEQ TO RAB$K_BFT OF !m570
SET
[RAB$K_SEQ,
RAB$K_TRA] : tempac =.rst [rstnrp]; ! Get NRP for sequential
[RAB$K_KEY] : tempac =.UAddr(rab [rabkbf, 0]); ! User's key buffer
[RAB$K_RFA] :
!+
! If the current record address is less than the address
! of the first data record, or is greater than the maximum
! RFA, then there is an error.
!-
BEGIN
tempac = .rab [rabrfa, 0]; ! Get user's RFA
IF (.tempac LSS .fst [fstlobyte]) ! Must be in
OR (.tempac GEQ bitn (8)) ! file data space
THEN usererror (er$rfa); ! Bad RFA
END;
[RAB$K_BLK,
RAB$K_BFT]: Usererror( er$bug ); ! Should not get here
TES;
crp = .tempac;
!+
! Dequeue the current record. Note that if a record is
! "found" twice in succession, RMS will still perform the
! $FINDs as two separate operations: the record will be
! unlocked and then locked again.
!-
IF datalocked
THEN unlock (rst [rstdatarfa]); ! Unlock the current record
!+
! Fetch the record pointer and make it current.
!-
rst [rstdatarfa] = .crp; ! Save record pointer for user
!+
! If the current page is in our window, then we don't have
! to call an external routine to get it.
!-
rfapagenum = .crp [rfapage];
IF (.currentwindow EQL 0) OR ! There is no current bucket
(.currentfilepage NEQ .rfapagenum)
THEN
BEGIN ! Get the new page
IF getwindow (.rfapagenum, ! Page number
.checkpageflag) ! Page must exist
EQL false
THEN
BEGIN ! Page does not exist
IF rfaadr
THEN ! RFA error
usererror (er$rfa)
ELSE ! End of file
doeof ()
END;
END;
!+
! Now, the page we want is in our window. We must set up
! a pointer to it in the RST.
!-
tempac = (rst [rstpagptr] = (.curentbufferadr) + .crp [ofset]);
!+
! The record is now available to us. We must pick up the
! record header to see if it is a valid record.
!-
header = ..tempac;
!+
! If the header is an end-of-page marker, then we need to
! bump our pointer to the start of the next file page.
! This condition should occur only if the file has the
! FB$BLK attribute.
!-
IF .header EQL eopmarker ! Check for end-of-page
THEN
BEGIN ! Found end-of-page marker
rtrace (' End-of-page marker found');
!+
! For RFA addressing, we can give an immediate error.
!-
IF rfaadr THEN usererror (er$rfa);
IF blocked
THEN ! We can bump the pointer
! to the next file page
nrp = (.crp OR ofsetmask) + %O'1' ! Bump to next page
ELSE
rmsbug (msgeop); ! End-of-page marker found
END
ELSE
BEGIN
lookat (' Header read = ', header);
!
! Check that undefined bits in header are off.
!
IF .header [rhdrundef] NEQ 0 ! Check unused part of header
THEN
usererror (er$rfa);
!+
! We will now compute the starting byte number of the next
! record. We will do this by computing the number of full
! words this record occupies and adding the size of the
! record header.
!-
recordlength = sizeinwords (.header [rhdrsize], .fst [fstbsz]);
nrp = .crp + .recordlength + headersize;
lookat (' Updated NRP = ', nrp);
!++
! We must now check to see if this record actually exists,
! or if it has been deleted sometime in the past. Before
! we can check the "valid" bit for sure, we must lock the
! record so than no one else can come in an delete it
! after we have already examined the deleted bit.
! However, the overhead for locking the record is extreme.
! Therefore, we will check the bit to see if the record
! exists or not. If so, we will lock the record and check
! again. If either check fails, the record has been
! deleted. If it is deleted after we have checked the bit
! but before we can lock it, that's OK because we will
! continue and the record will be unlocked during the next
! pass through this loop.
!--
!+
! First, check that this record has been written; that is,
! if the "valid" bit is on.
!-
IF (.header AND rhdrvalid) EQL 0
THEN ! Is probably the EOF
BEGIN
IF rfaadr THEN usererror (er$rfa); ! Bad RFA
doeof () ! Sequential access means EOF
END;
IF (.header AND rhdrdelete) EQL 0
THEN
BEGIN
IF locking THEN lockrec (crp); ! Lock record
header = .(.rst [rstpagptr]) ! Re-fetch header
END;
!+
! We now must check the header again to make sure it's
! still good.
!-
IF (.header AND rhdrdelete) EQL 0
THEN
valid = true ! Leave the loop
ELSE ! Record has been deleted
BEGIN
IF rfaadr THEN usererror (er$del)
END
END;
!+
! Update all data pages.
!-
rst [rstrszw] = .recordlength; ! Save record size in words
rst [rstrsz] = .header [rhdrsize]; ! And in bytes
IF chkflag (rab [rabrop, 0], ropnrp) NEQ 0
THEN
rst [rstnrp] = .crp ! Cause sequential GET to
! always get found record
ELSE
IF (seqadr) OR (currentjsys EQL c$get) !
THEN
rst [rstnrp] = .nrp; ! Update the NRP if
! sequential access-mode
END;
!+
! Fall thru as soon as a valid record is found.
!-
lookat (' Record found at: ', crp);
lookat (' NRP = ', nrp);
!+
! Set up the user's RFA because the operation was OK.
!-
rab [rabrfa, 0] = .rst [rstdatarfa];
RETURN true
END; ! End of FINDSEQ
%SBTTL 'FINDREL - $FIND for relative file'
GLOBAL ROUTINE findrel =
!++
! FUNCTIONAL DESCRIPTION:
!
! Processor for $FIND service for a relative file.
!
! If FB$SMU is set in the FAC field, then return the
! page number containing the record in the LSN field
! of the user's RAB. Zero LSN if a SMU find fails.
!
! FORMAL PARAMETERS
!
! None.
!
! IMPLICIT INPUTS
!
! ?
!
! ROUTINE VALUE:
!
! None.
!
! SIDE EFFECTS:
!
! ?
!
!--
BEGIN
LOCAL
crp,
tempnrp,
header : BLOCK [1],
temp,
currentemtpage, ! Page number already checked
! to see if it exists
valid,
bytenum : BLOCK [1];
REGISTER
tempac; ! AC for temporary calculations
TRACE ('FINDREL');
!+
! Especially for FB$SMU, zero the LSN field of the RAB.
!-
IF (.fab [fabfac, 0] AND fb$smu) NEQ 0 ! SMU set?
THEN
rab [rablsn, 1] = 0; ! Zero the LSN
!+
! Loop until a valid record is found.
!-
valid = false; ! Assume record is not valid
currentemtpage = 0; ! Clear this value
!+
! In this loop, we will update the user's permanent NRP
! only when a good record is found. This is to avoid the
! situation which would arise if the user tried to read a
! record, when he was already at the last record in the
! file. In such a case, it is important that his NRP not
! be changed from what it was before he attempted to read
! the record. There is a small drawback to this
! technique, though. If the user tries to read a record,
! and the only one on thecurrent page is locked by
! someone else, he will get an error message (as he
! should), but his NRP will not have been changed from
! what it was before he did the $GET.
!-
tempnrp = .rst [rstnrp]; ! Don't update real NRP until
! operation succeeds
WHILE .valid EQL false DO
BEGIN
!+
! Fetch the address of the target record, which depends on
! the user's record-access (RAC) field value.
!-
crp = (CASE recordaccess FROM racseq TO racrfa OF
SET
[racseq] : .tempnrp; ! Sequential (CRP = NRP)!M420
[rackey] : ! Key retrieval !M420
BEGIN ! Fetch key value !A420
LOCAL ! !A420
kbuf; ! For building global !A420
kbuf = .rab [rabkbf, 0]; ! User's key buffer !A420
IF .kbuf<lh> EQL 0 ! Local address? !A420
THEN ! !A420
kbuf = .kbuf OR .blksec; ! Yes - build global !A420
..kbuf ! Return key value !A420
END; ! !A420
[racrfa] : .rab [rabrfa, 0]; ! RFA (CRP = RFA) !M420
TES);
!+
! Unlock the current record.
!-
IF datalocked THEN unlock (rst [rstdatarfa]);
!+
! Store the current record number in the RST.
!-
rst [rstdatarfa] = .crp; ! Set CRP in user's RAB
!+
! Find the starting byte address of this record.
!-
IF (bytenum = numbertorfa (.crp)) EQL false
THEN
BEGIN ! Record number was beyond MRN
!+
! The record number of the target record was greater than
! the maximum record number of the file. If the user was
! processing the file sequentially, then he should get an
! EOF error; otherwise, he should get a record-not-found
! error.
!-
IF seqadr THEN doeof ();
usrsts = er$key; ! Assume key error
IF rfaadr THEN usrsts = er$rfa;
usrerr () ! Exit to user
END;
!+
! We must now position to the target record. However, we
! must also check to see if the page exists. If not, then
! we may be through (if key access is being user). If it
! does exist, then we can go ahead and read it.
!-
IF gtbyte (.bytenum, ! RFA address
true) ! Abort if non-existent
EQL false
THEN
BEGIN ! Found a non-existent page
IF ( NOT seqadr) ! Record not found?
THEN
usererror (er$rnf);
!+
! This page is non-existent. This could be caused either
! by a sparse file, or by the true last page in the file.
! If the file is sparse (there is more to come), then we
! will continue to process it. But if we have reached the
! last page in the file, we must give an EOF error return.
!-
IF (tempac = .bytenum [rfapage]) NEQ (.currentemtpage)
THEN
BEGIN ! We must check this page
tempac = nextpage (.fst [fstjfn], .tempac);
IF .tempac EQL false
THEN
doeof () ! If no more pages, it's EOF
ELSE
currentemtpage = .tempac; ! Remember this page
END
END
ELSE
BEGIN
header = .(.rst [rstpagptr]); ! Fetch header
IF .header EQL eopmarker THEN rmsbug (msgptr); ! Bad header found
IF (.header [rhdrundef] NEQ 0) THEN usererror (er$rfa); ! Bad RFA
!+
! Check to see if this record has been written.
!-
IF (.header AND rhdrvalid) EQL 0
THEN ! The record was never created
BEGIN
rab [rabrfa, 0] = 0; ! Zap RFA
IF NOT seqadr THEN usererror (er$rnf);
END
ELSE ! The record was written once
BEGIN
IF (.header AND rhdrdelete) EQL 0
THEN
BEGIN
IF locking THEN lockrec (crp);
header = .(.rst [rstpagptr])
END;
!+
! Recheck the record header.
!-
IF (.header AND rhdrdelete) EQL 0 ! Check delete bit
THEN
valid = true ! Set flag so we'll fall thru
ELSE ! The record is deleted
BEGIN
!+
! Decide what to do depending on RAC value.
!-
CASE recordaccess FROM 0 TO 2 OF
SET
[0] :
0; ! Sequential--do nothing
[1] :
usererror (er$rnf); ! Key
[2] :
usererror (er$del) ! RFA
TES;
rab [rabrfa, 0] = 0
END
END
END;
lookat (' Record header: ', header);
!+
! Update user's parameter block.
!-
IF (seqadr) OR (currentjsys EQL c$get) !
THEN
tempnrp = .crp + 1; ! Update loop variable to CRP+1
!+
! Store the size in bytes and words of this record.
!-
rst [rstrsz] = .header [rhdrsize]; ! Save size of this record
rst [rstrszw] = sizeinwords (.rst [rstrsz], .fst [fstbsz])
END;
IF (chkflag (rab [rabrop, 0], ropnrp) NEQ 0) AND ! NRP?
(currentjsys EQL c$find) ! and $FIND?
THEN
rst [rstnrp] = .crp ! Make sequential GET to
! always be found record
ELSE
IF (seqadr) OR (currentjsys EQL c$get) !
THEN
rst [rstnrp] = .crp + 1; ! Update the NRP if sequential
! access-mode
!+
! Store the number of the current record in the RABBKT
! field. Note that if there is an error later during the
! processing of this record, the BKT field will still
! contain the number of the target record. Thus, users
! should not assume that a non-zero record number in BKT
! reflects a successful operation.
!-
rab [rabrfa, 0] = (rab [rabbkt, 0] = .crp);
!+
! If we are doing a $FIND with FB$SMU set, return
! the record's page number in the relative file
! so LIBOL can do some locking.
!-
IF (.fab [fabfac, 0] AND fb$smu) NEQ 0 ! SMU in progress?
THEN
rab [rablsn, 1] = .bytenum [rfapage]; ! Return the page number
RETURN true
END; ! End of FINDREL
%SBTTL 'FINDIDX - $FIND for ISAM file'
GLOBAL ROUTINE findidx ( ! Find indexed record
recdesc : REF BLOCK, ! Record descriptor
databd : REF BLOCK ! Bucket descriptor
) : NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
!
! Routine to perform the $FIND service for an indexed
! file. This routine is called also by the $GET
! processor in order to position to the correct
! record.
!
! If there is an error during this routine, it will
! not return but will exit directly to the user.
!
! FORMAL PARAMETERS
!
! RECDESC - Record descriptor packet
! RFA - RFA of target record (returned)
! RRV - RRV address of target record (returned)
!
! DATABD - Data bucket descriptor, all fields
! returned.
!
! IMPLICIT INPUTS
!
! RAB - User's Record Access Block
! RABRAC - Record access value
! RABKRF - Key of reference
!
! ROUTINE VALUE:
!
! None.
!
! SIDE EFFECTS:
!
! ?
!
!--
BEGIN
LOCAL
bdptr : REF BLOCK, ! Current bucket descriptor
savedstatus, ! Store status here
nextbucket, ! Next bucket for read-ahead
bucketsize, ! Size of a bucket
tptr : REF BLOCK, ! Temp pointer
nextbd : BLOCK [bdsize], ! Descriptor of next bucket
lockaccess, ! Shared/exclusive
recordptr : REF BLOCK; ! Current record
TRACE ('FINDIDX');
kdb = .fst [fstkdb]; ! Set up primary KDB
!
! Clear some fields in the Record Descriptor which we will
! pass to the lower level routines.
!
recdesc [rdstatus] = 0; ! Clear status bits
recdesc [rdflags] = rdflghorizok; ! Horizontal search OK
fetchcurrentbkt (databd); ! Set current bucket to null
!+
! Dispatch to the correct routine.
!-
IF seqadr
THEN
BEGIN ! Sequential access
setnullbd (cbd); ! Indicate no current bucket
savedstatus = fidxseq (.recdesc, .databd);
END
ELSE
BEGIN ! Random access
!+
! We can release the current bucket because since this is
! a random access, it is unlikely that both the target
! record and the current record are in the same bucket.
!-
releascurentbkt;
!+
! We must now lock the entire index structure so that we
! can move around the file at will until we reach the
! target record.
!-
IF locking
THEN
BEGIN
IF lockindex (enqblk, enqshr) EQL false ! Wait, shared
THEN
returnstatus (er$edq); ! Shouldn't fail
END;
!+
! Dispatch to correct routine depending on record access.
!-
IF keyadr THEN savedstatus = fbykey (.recdesc, .databd) ELSE savedstatus = frecrfa (.recdesc, .databd)
;
END;
!+
! At this point, we have either succeeded or failed in
! our efforts to locate the next record. However, in
! either case, we may have locked the index of the file
! which now must be unlocked. Also, if we located the
! target record, we must lock its bucket if we have not
! already done so.
!-
IF locking AND .savedstatus NEQ false
THEN
BEGIN ! Do some unlocking & locking
!+
! Lock the bucket if it is not locked.
!-
IF ( NOT bktlocked (databd))
THEN
BEGIN ! Lock the bucket descriptor
lockaccess = enqshr; ! Assume read-only
IF NOT inputmode THEN lockaccess = enqexc;
rtrace (' Locking the bucket...');
IF lockbd (databd, enqaa, .lockaccess) EQL false
THEN
BEGIN
rtrace (' ***Lock already locked');
savedstatus = false; ! Return failure
putbkt (false, ! No update
.databd); ! Bucket
usrsts = er$rlk ! Set error code
END
END;
!+
! It is possible that another user could have deleted this
! record between the time we found it and locked it. If
! this is the case, unlock the buffer and say the record
! was never found.
!-
recordptr = .recdesc [rdrecptr];
IF deleteflag (recordptr) EQL 1
THEN
BEGIN ! Record actually deleted
rtrace (' Unlocking bucket - record deleted!');
unlockbucket (.databd [bkdbktno]);
savedstatus = false; ! Return failure
usrsts = er$rnf ! Set error code
END;
END;
!+
! Unlock the index structure, if necessary.
!-
IF indexlocked THEN unlockindex;
!+
! We have now done the $FIND. Was it OK?
!-
IF .savedstatus EQL false
THEN
BEGIN
rtrace (' Error in $FIND...');
!
! Clear the user's RFA and our record pointer.
!
rst [rstdatarfa] = 0;
IF NOT rfaadr THEN rab [rabrfa, 0] = 0;
usrerr () ! Exit to user
END;
!+
! The $FIND was successful. We must now save the current
! RFA and the current bucket. However, if we are
! currently processing a $GET macro, then we should return
! without performing the normal clean-up operations, which
! will be done in the $GET routine.
!-
setcurrentbkt (databd); ! SAVE CURRENT BKT
!+
! Save the pointer to the current record and set the
! record size of this record (this is used only on $UPDATE
! to check if the record size has been changed by the
! user. If record-length modification is supported, then
! this operation is unnecessary.
!-
rst [rstpagptr] = (recordptr = .recdesc [rdrecptr]);
IF fixedlength ! What format?
THEN
rst [rstrsz] = .fst [fstmrs] ! Get record size from FST
ELSE
rst [rstrsz] = .recordptr [drrecsize]; ! Get it from the record
rst [rstrszw] = sizeinwords (.rst [rstrsz], .fst [fstbsz]);
IF currentjsys EQL c$get THEN RETURN; ! Leave if we are $GETting
!+
! Update the Next-Record-Pointer data in the RST.
!-
setnrp (.recdesc, .databd); ! Update data base
!+
! Set up the RFA in the user's RAB.
!-
rab [rabrfa, 0] = .recdesc [rdrrv];
RETURN;
END; ! End of FINDIDX
END ! End of Module FINDER
ELUDOM