Trailing-Edge
-
PDP-10 Archives
-
bb-h138f-bm
-
7-sources/rmsput.b36
There are 6 other files named rmsput.b36 in the archive. Click here to see a list.
%TITLE 'P U T -- $PUT service'
!<BLF/REQUIRE 'RMSBLF.REQ'>
MODULE put (IDENT = '3(577)'
) =
BEGIN
GLOBAL BIND
putv = 3^24 + 0^18 + 577; ! Edit date: 19-Sep-85
!+
!
!
! FUNCTION: THIS MODULE CONTAINS ALL ROUTINES WHICH PROCESS
! THE $PUT MACRO FOR RMS-20.
! AUTHOR: S. BLOUNT
!
!
! COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1977, 1986.
! ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND
! COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH
! THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR
! ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE
! AVAILABLE TO ANY OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE
! SOFTWARE IS HEREBY TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT
! NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL
! EQUIPMENT CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF
! ITS SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!
!
!
!
! ********** TABLE OF CONTENTS **************
!
!
!
!
! ROUTINE FUNCTION
! ======= ========
!
! $PUT PROCESSOR FOR $PUT MACRO
!
! PUTSQR "PUT"'S RECORD TO A SEQUENTIAL OR RELATIVE FILE
!
! PUTREC PERFORMS PHYSICAL TRANSFER OF RECORD
!
! PUT "PUT"'S RECORD TO INDEXED FILE
!
! SETPUT SET-UP FOR $PUT TO INDEXED FILE
!
!
!
!
!
! REVISION HISTORY:
!
! EDIT DATE WHO PURPOSE
! ==== ==== === =======
!
! 1 7-OCT-76 SEB MISC OPTIMIZATIONS
! 2 28-OCT-76 SEB ADD RELEASECURRENTBUCKET MACRO
! 3 8-NOV-76 SEB FIX BUG IN PUT TO REL FILE
! 4 23-NOV-76 SEB FIX CHECK OF VALID BIT
! 5 7-FEB-77 SEB FIX MAXRECORDSIZE COMP. IN SETPUT
! SO TOO BIG RECORDS ARE DETECTED
! 6 11-MAR-77 SEB PUT CODE IN FOR CHECK BYTE
! 7 23-MAR-77 SEB UNDO EDIT 6
! 8 5-APR-77 SEB DON'T BLT FULL SIZE OF RELATIVE RECORD
! 9 6-APR-77 SEB CHANGE HYBYTE TO RST FIELD
!
! *************************************************
! * *
! * NEW REVISION HISTORY *
! * *
! *************************************************
!
! PRODUCT MODULE SPR
! EDIT EDIT QAR DESCRIPTION
! ====== ====== ===== ===========
!
!
! ***** END OF REVISION HISTORY *****
!
! ***** BEGIN VERSION 2 DEVELOPMENT *****
!
!
! PRODUCT MODULE SPR
! EDIT EDIT QAR DESCRIPTION
! ====== ====== ===== ===========
!
! 301 300 XXXXX SUPPORT EXTENDED ADDRESSING.
!
! 400 400 xxxxx Clean up BLISS code (RL,22-Apr-83)
!
! 416 xxxxx Clarify logic in PUTREC (RL,7-Jul-83)
!
! 501 Remote file access (AN, Jun-84)
! 504 Image Mode (AN, Jul-84)
! 572 Set update flag (DR, Sep-85)
! 575 Allow image put by RFA (AN, 24-Oct-85)
!-
REQUIRE 'RMSREQ';
EXTERNAL ROUTINE
! EXTERNAL ROUTINES USED
!
! PUTASC "PUT"'S RECORD TO ASCII FILE
PUTM11: NOVALUE; ! "PUT"'S RECORD TO MACY11 FILE
! PUTIMA "PUT"'S RECORD TO IMAGE FILE
!
%SBTTL 'PUT - $PUT processor'
GLOBAL ROUTINE $put (rab_block, errorreturn) =
! $PUT
! ====
! PROCESSOR FOR $PUT MACRO
! INPUT:
! ADDRESS OF USER RECORD BLOCK (RAB)
! ADDRESS OF USER ERROR ROUTINE
! OUTPUT:
! <STATUS FIELD OF USER RAB>
! ROUTINES CALLED:
! PUTASCII
! PUTIMAGE
! PUTSQR
! PUTIDX
! RSETUP
! FORMAT OF THE $PUT MACRO:
!
! $PUT <RAB-ADDRESS> [,<ERROR-ADDRESS>]
!
! RAB FIELDS USED AS INPUT BY $PUT:
!
! ISI INTERNAL STREAM IDENTIFIER
! KBF KEY BUFFER ADDRESS (RELATIVE/INDEXED)
! KSZ SIZE OF KEY IN KEY BUFFER (INDEXED)
! LSN LINE-SEQUENCE NUMBER (LSA)
! RAC RECORD ACCESS
! RBF ADDRESS OF USER RECORD BUFFER
! ROP RECORD ACCESS OPTIONS
! RSZ SIZE OF RECORD
!
! RAB FIELDS WHICH ARE SET BY $PUT:
!
! BKT RECORD NUMBER OF CURRENT RECORD (RELATIVE)
! RBF ADDRESS OF BUFFER FOR NEXT RECORD (-11 COMPATIBILITY)
! RFA RECORD'S FILE ADDRESS
! STS COMPLETION STATUS CODE
! STV ADDITIONAL STATUS INFORMATION
BEGIN
REGISTER
errorcode; ! USED TO SAVE AN ERROR CODE
rmsentry ($put);
!+
! FETCH INPUT ARGS
!-
rab = .rab_block; ! GET ADDRESS OF RAB
erradr = .errorreturn; ! AND USER ERROR ADDRESS
rsetup (axput); ! DO OTHER STUFF
!+
!
! *** ERROR PROCESSING FOR $PUT MACRO ***
! * *
! * THE FOLLOWING ERRORS ARE CHECKED: *
! * 1. RFA ADDRESSING IS ILLEGAL *
! * 2. RECORD-SIZE < = MAX-REC-SIZE *
! * 3. RECORD BUFFER MUST BE PROPER *
! * 4. RECORD-SIZE FOR FIXED-LENGTH RECORDS *
! * *
! * *
! *************************************************
!
!-
errorcode = 0; ! ASSUME NO ERROR
!
! RFA addressing on output is dangerous, but Fortran needs it....
!
IF (rfaadr AND rmsfile
AND (NOT .Fst[Fst$v_Remote])) ! DO ALLOW RFA ADDRESSING !m577
THEN errorcode = er$rac; ! IF file is NON-RMS OR REMOTE
IF (.fst [fstmrs] NEQ 0) ! IF THERE IS A MAX RECORD SIZE
THEN
IF (.rab [rabrsz, 0] GTR .fst [fstmrs]) THEN errorcode = er$rsz;
! RECORD IF BIGGER THAN MAXIMUM
IF .rab [rabrbf, 0] LEQ minuserbuff THEN errorcode = er$rbf; ! CHECK BUFFER
IF fixedlength
THEN
BEGIN
IF .rab [rabrsz, 0] NEQ .fst [fstmrs] THEN errorcode = er$rsz
END;
!+
! WAS THERE AN ERROR?
!-
IF .errorcode NEQ 0
THEN
BEGIN
usrsts = .errorcode;
usrerr () ! EXIT FROM RMS
END;
!+
! ***** END OF ERROR PROCESSING FOR $PUT ******
!-
IF .fst[fst$v_remote] !a501
THEN !a501
Dap$Put (.rab, .erradr) !a501
ELSE !a501
!+
! FILE IS LOCAL.
! DISPATCH TO A ROUTINE TO WRITE A RECORD FOR EACH FILE ORGANIZATION
!-
CASE fileorg FROM 0 TO 3 OF
SET
[0] :
SELECT .Fst[Fst$h_File_Class] OF
SET
[0, Typ$k_Ascii]:
putascii (); ! ASCII file
[Typ$k_Image, Typ$k_Byte]:
putimage (); ! IMAGE file
[Typ$k_Macy11]:
PutM11 (); ! Macy11 file !a567
[OTHERWISE]:
usererror( rms$_cla ); ! unknown
TES;
[1] :
putsqr (); ! Sequential file
[2] :
putsqr (); ! Relative file
[3] :
putidx (); ! Indexed file
TES;
!+
! SET THE "SUCCESS" BIT AND REMEMBER THAT THIS WAS A $PUT
!-
setsuccess; ! SET SUCCESS BIT AND LAST-OPER
! Set the sequential flag if operation is sequential
Rst[Rst$v_Last_Sequential] = SeqAdr; !a577
!+
! RETURN THE RFA OF THIS RECORD TO THE USER
!-
rab [rabrfa, 0] = .rst [rstdatarfa];
!+
! EXIT TO THE USER
!-
usrret (); ! Exit
1
END; ! End $PUT
%SBTTL 'PUTSQR - Seq/Rel PUT'
GLOBAL ROUTINE putsqr =
! PUTSQR
! ======
!
! THIS ROUTINE PROCESSES THE $PUT VERB TO A SEQUENTIAL OR RELATIVE
! FILE
!
! INPUT:
! <NONE>
!
! OUTPUT:
! <NONE>
!
BEGIN
LOCAL
temp1,
bytenum, ! BYTE NUMBER OF TARGET RECORD
header,
crp; ! SAVE FOR ARA
REGISTER
fullrecordsize;
TRACE ('PUTSQR');
!+
! FIND THE CRP AND BYTE-ADDRESS OF THE CURRENT RECORD FOR EACH FILE TYPE
!-
!+
! WE MUST PERFORM DIFFERENT OPERATIONS HERE DEPENDING
! UPON THE FILE ORGANIZATION. HERE IS A SUMMARY OF
! THE ACTIONS WHICH ARE DONE BELOW:
!
!
! ASCII FILES:
! IF THIS IS AN ASCII FILE, THEN WE SHOULD NOT BE HERE, MUST BE A BUG.
!
! SEQUENTIAL FILES:
! FOR SEQUENTIAL FILES, WE FIRST MUST COMPUTE THE SIZE
! OF THIS RECORD IN WORDS. THIS QUANTITY IS COMPUTED HERE
! BECAUSE IT IS USED HEAVILY LATER AND WE WOULD LIKE NOT
! TO HAVE TO RE-COMPUTE IT SEVERAL TIMES. THEN, WE MUST
! DETERMINE IF THIS RECORD CAN FIT ON THE PAGE IF THE
! FB$BLK ATTRIBUTE IS DEFINED FOR THE FILE.
!
! RELATIVE FILES:
! WE MUST FETCH EITHER THE NRP OR THE USER'S RECORD
! KEY, DEPENDING UPON HIS RECORD-ACCESS FIELD. THIS
! VALUE WILL THEN BE MAPPED INTO AN RFA WHICH GIVES
! THE STARTING ADDRESS OF THE TARGET RECORD.
!-
!+
! COMPUTE THE SIZE IN WORDS OF THIS RECORD
!-
rst [rstrszw] = sizeinwords (.rab [rabrsz, 0], .fst [fstbsz]);
CASE fileorg FROM 0 TO 3 OF
SET
[0] :
0; ! SHOULD NOT GET HERE
[1] :
BEGIN
crp = .rst [rstnrp]; ! GET NRP
!+
! IF FILE IS BLOCKED, SEE IF RECORD
! CAN FIT ON THIS PAGE
!-
IF blocked
THEN ! CHECK TO SEE IF RECORD CAN FIT ON PAGE
crp = nospan (.crp);
bytenum = .crp ! GET FILE ADDRESS
END;
[2] :
BEGIN ! Relative
crp = (CASE recordaccess FROM 0 TO 1 OF
SET
[0] : .rst [rstnrp]; ! Sequential access: fetch NRP
[1] :
BEGIN ! Key access
LOCAL
tempkbfpt;
tempkbfpt = .rab [rabkbf, 0];
IF .tempkbfpt LSS minuserbuff THEN usererror (er$kbf);
IF .tempkbfpt<lh> EQL 0 THEN tempkbfpt = .tempkbfpt OR .blksec;
..tempkbfpt
END
TES);
IF (bytenum = numbertorfa (.crp)) ! COMPUTE BYTE-# OF RECORD
EQL false
THEN
usererror (er$key) ! RECORD WAS .GTR. MRN
END;
[3] :
TES;
!+
! AT THIS POINT, WE HAVE THE FOLLOWING VALUES:
! CRP = RFA OF THE RECORD TO BE WRITTEN
! BYTENUM = BYTE ADDRESS OF RECORD
!-
!+
! SET UP SOME VALUES WHICH WE WILL USE LATER SO THEY
! CAN BE IN REGISTERS TO SAVE TIME
!-
fullrecordsize = .rst [rstrszw]; ! SIZE OF ENTIRE RECORD
!+
! MAKE SURE THE RECORD CAN FIT ON ONE PAGE IF BLOCKED
!-
IF blocked
THEN
IF ((.fullrecordsize + headersize) GTR pagesize) THEN usererror (er$rsz);
!+
! PRINT OUT THE RESULTS FOR DEBUGGING
!-
lookat (' BYTE NUMBER OF REC: ', bytenum);
lookat (' CURRENT REC PTR:: ', crp);
!+
! UNLOCK CURRENT RECORD
!-
IF datalocked THEN unlock (rst [rstdatarfa]); ! UNLOCK THE CURRENT RECORD
!+
! MAKE CRP EQUAL TO NRP
!-
rst [rstdatarfa] = .crp; ! CRP = NRP
!+
! LOCK THE RECORD TO BE WRITTEN
!-
IF locking THEN lockrec (crp); ! LOCK THE RECORD
!+
! THE RECORD IS NOW LOCKED ( IF FILE-SHARING )
! HOWEVER, IT MAY NOT BE IN OUR BUFFER SO
! WE MUST GET IT THERE AND SET UP THE
! POINTER TO IT ( PAGPTR ) WITHIN THE WINDOW PAGE
!-
!+
! POSITION THE FILE TO THE CORRECT RECORD
!-
gtbyte (.bytenum, false); ! FETCH FILE PAGE INTO USER WINDOW
!+
! THE PAGE IS NOW IN THE BUFFER AND PAGPTR POINTS TO IT
!-
header = .(.rst [rstpagptr]); ! GET RECORD HEADER
IF seqfile AND seqadr ! Sequential access to seq file !m567
AND (.header NEQ 0)
THEN usererror (er$nef); ! ATTEMPT TO INSERT RECORD
!+
! FOR RELATIVE FILES, THE RECORD CAN BE WRITTEN EXCEPT
! IN THE CASE WHERE THE RECORD IS VALID, BUT NOT DELETED.
! THEREFORE, WE MUST CHECK BOTH THE VALID AND THE DELETED
! BITS IN THE RECORD HEADER.
!-
IF relfile
THEN
BEGIN ! Check for non-deleted record
IF (chkflag (header, rhdrvalid + rhdrdelete)) EQL (rhdrvalid) THEN usererror (er$rex);
rab [rabbkt, 0] = .crp ! Return record number
END;
!+
! NOW, MOVE THE RECORD ONTO THE FILE PAGE
!-
putrec (); ! MOVE RECORD
!+
! UPDATE THE HIGHEST BYTE IN THE FILE
!-
temp1 = .bytenum + .fullrecordsize + headersize; ! COMPUTE WHERE NEXT RECORD IS
IF .temp1 GTR .rst [rsthybyte] ! IF THIS RECORD IS HIGHER THAN ANY PREVIOUS ONE...
THEN
BEGIN
rst [rsthybyte] = .temp1; ! RESET EOF BYTE
fst [fstsof] = .temp1; ! CROCK
END;
!+
! UPDATE THE NEXT RECORD POINTER
!-
IF seqadr
THEN
rst [rstnrp] = (IF seqfile THEN .crp + headersize + .fullrecordsize
! NRP = OLD NRP + SIZE OF HEADER + SIZE OF RECORD
ELSE .crp + 1); ! BUMP RECORD NUMBER FOR RELATIVE FILES
!
! Now release any locked record
!
IF datalocked THEN unlock (rst [rstdatarfa]); ! UNLOCK THE RECORD
RETURN true
END; ! End PUTSQR
%SBTTL 'PUTREC - create record in file'
GLOBAL ROUTINE putrec : NOVALUE =
! PUTREC
! ======
! THIS ROUTINE CREATES A RECORD IN A RMS-20 FILE. IT IS
! ASSUMED ON INPUT THAT PAGPTR POINTS TO THE
! CORRECT PLACE ON THE CURRENT WINDOW PAGE AT WHICH TO
! WRITE THE RECORD. THERE MUST BE NO OVERLAP PAST
! THE END OF THE WINDOW PAGE ON INPUT.
! ON OUTPUT, PAGPTR WILL BE CLOBBERED.
! INPUT:
! <NONE>
! OUTPUT:
! <NO STATUS RETURNED>
! GLOBALS USED:
! GTBYTE
! MOVEREC
BEGIN
LOCAL
count,
bytesize,
dummylocal, ! USED TO PASS SUBROUTINE ARGS
newpage,
userbuff;
REGISTER
recordptr,
temp,
bltac;
MAP
recordptr : REF BLOCK;
TRACE ('PUTREC');
!+
! CHECK VALIDITY OF A FEW THINGS
!-
recordptr = .rst [rstpagptr]; ! FETCH POINTER
!+
! WRITE HEADER
!-
recordptr [wholeword] = .rab [rabrsz, 0] + rhdrvalid; ! RECORD-SIZE + VALID
!+
! WE HAVE NOW WRITTEN THE HEADER FOR THIS RECORD.
! WE MUST BUMP THE FILE POINTER AND CHECK TO SEE
! IF WE ARE PAST THE END OF THE FILE BUFFER. IF SO,
! WE WILL MAP IN THE NEXT PAGE OF THE FILE AND WRITE
! THE REST OF THE RECORD
!-
recordptr = .recordptr + 1; ! BUMP FILE POINTER
IF (.recordptr AND ofsetmask) EQL 0
THEN ! We overlapped
BEGIN ! Map next page
!
! Flag this bucket for update!
! Updating pages to disk happens automagically on TOPS20
! but not on TOPS10, so this tells the low-level code to do it.
!
setbfdupd (cbd [bkdbfdadr]); ! Indic file page upd !m572
newpage = ((.currentfilepage + 1)^p2w); ! GET START OF NEXT FILE PAGE
!+
! Position the file
!-
gtbyte (.newpage, ! RFA of next page
false); ! No abort
recordptr = .rst [rstpagptr] ! Reset pointer
END;
!+
! WE ARE NOW READY TO MOVE THE RECORD TO THE FILE.
! HOWEVER, IN MOST CASES THE RECORD WILL FIT ENTIRELY
! ON THE CURRENT FILE PAGE. IF THIS IS THE CASE, WE
! DON'T NEED TO PERFORM ALL THE PAGE TURNING THAT
! "MOVEREC" CAN DO; SO, A QUICK BLT IS ALL WE NEED.
! THEREFORE, IF THIS RECORD DOES NOT SPAN FILE PAGES,
! WE WILL DO THE MOVE HERE; OTHERWISE, WE WILL CALL
! "MOVEREC" TO DO IT FOR US.
!-
bytesize = .fst [fstbsz]; ! BYTE SIZE OF RECORD TO MOVE
count = .rab [rabrsz, 0]; ! SIZE OF RECORD
userbuff = .rab [rabrbf, 0]; ! GET USER ADDRESS
IF .userbuff<lh> EQL 0 ! !M416
THEN ! !M416
userbuff = .userbuff OR .blksec; ! DEFAULT SECTION # !M416
temp = .rst [rstrszw]; ! GET RSZW INTO AC
IF ((.recordptr AND ofsetmask) + .temp) LSS pagesize
THEN
BEGIN ! Record does not span
! page boundaries
setbfdupd (cbd [bkdbfdadr]); ! Indic file page upd
IF .rmssec NEQ 0
THEN
xcopy (.userbuff, ! From
.recordptr, ! To
.temp) ! Size
ELSE
movewords (.userbuff, ! From
.recordptr, ! To
.temp); ! Size
END
ELSE
BEGIN
!+
! Set up to move the record, if it spans pages
!-
dummylocal = .recordptr; ! Store in local variable
moverec (.dummylocal, ! Window ptr
.userbuff, ! User buffer
true, ! Put-flag
.count, ! Size
.bytesize); ! Bytesize
END;
RETURN
END; ! End PUTREC
%SBTTL 'PUTIDX - Insert UDR into indexed file'
GLOBAL ROUTINE putidx : NOVALUE =
! PUTIDX
! ======
! ROUTINE TO INSERT A USER DATA RECORD INTO AN INDEXED FILE. ON
! ENTRY TO THIS ROUTINE, NO PREPARATION OR RECORD UNLOCKING
! HAS BEEN DONE.
! INPUT:
! <NONE>
! OUTPUT:
! <NONE>
! ROUTINES CALLED:
! FOLLOWPATH
! INSRTUDR
! IDXUPDATE
! INSRTSIDR
! REMOVRECORD
BEGIN
LOCAL
result,
recdesc : BLOCK [rdsize], ! Record descriptor packet
secrecdesc : BLOCK [rdsize], ! 2nd Index Record Descriptor
bktdesc : BLOCK [bdsize], ! Bucket descriptor of data
splitbd1 : BLOCK [bdsize], ! 1st extra bucket descriptor
splitbd2 : BLOCK [bdsize], ! 2nd extra bucket descriptor
rootbd : BLOCK [bdsize], ! Bucket desc for index root
tempptr : REF BLOCK, ! Proper bucket pointer
userrecordptr : REF BLOCK, ! Ptr to the user's record
addressofrecord, ! Location of new record
keyofreference, ! Current key value
datapage; ! Data page number
TRACE ('PUTIDX');
!+
! SET UP THE ADDRESS OF THE USER'S DATA RECORD
!-
userrecordptr = .rab [rabrbf, 0];
! Default section is the section of the RAB
IF .userrecordptr<lh> EQL 0 THEN userrecordptr = .userrecordptr OR .blksec;
!+
! SET UP THE ARGUMENTS FOR THE PUT INDEXED OPERATION
!-
setput (recdesc);
!+
! SET OUR BUCKET DESCRIPTOR TO BE NULL
!-
setnullbd (bktdesc);
!+
! ***** LOCK THE ENTIRE INDEX DURING OUR OPERATION *****
!-
IF locking
THEN
BEGIN
IF lockindex (enqblk, enqexc) EQL false THEN usererror (er$edq)
END;
!+
! BEFORE WE INSERT THE RECORD, WE MUST CHECK TO MAKE
! SURE THAT THIS KEY HAS AN INDEX STRUCTURE
!-
IF noindexflag NEQ 0
THEN
BEGIN
!
! We must create an index root and a first data bucket.
!
makidx (); ! Make the index
!+
! WE MUST NOW CHECK TO SEE IF THERE STILL ISN'T
! AN INDEX FOR THIS KEY. THIS COULD BE TRUE IF
! A FILE WITHOUT AN INDEX WAS OPENED, BUT SOMEONE
! ELSE CREATED AN INDEX BEFORE WE DID.
!-
IF noindexflag NEQ 0
THEN ! There was an error
cleanup (bktdesc)
END;
!+
! INSERT THE DATA RECORD INTO THE PRIMARY INDEX
!-
IF followpath (recdesc, bktdesc) EQL false ! Bucket
!+
! IF WE COULDN'T LOCATE THE DATA BUCKET, THEN WE MUST
! EXIT WITH FAILURE. HOWEVER, IF THE SEARCH KEY IS .GTR.
! THAN ALL KEYS IN THE BUCKET, THEN THAT IS A REASONABLE
! SITUATION.
!-
THEN
cleanup (bktdesc);
!+
! CHECK FOR DUPLICATE RECORD
!-
result = chkdup (recdesc, bktdesc);
!+
! WE NOW HAVE LOCATED THE POSITION WHERE THE NEW RECORD
! IS TO BE INSERTED. HOWEVER, WE MUST DETERMINE IF
! SOME OTHER PROCESS ALREADY HAS THE BUCKET LOCKED.
!-
IF .result NEQ false ! Did CHKDUP succeed?
THEN
IF locking
THEN
BEGIN
result = lockbd (bktdesc, enqaa, enqexc) ! DON'T WAIT FOR BUCKET
END;
!+
! THE RECPTR FIELD IN THE RECORD-DESCRIPTOR NOW CONTAINS
! THE ADDRESS WHERE WE WANT TO WRITE OUR NEW RECORD.
!-
IF .result NEQ false ! IF CHKDUP SAID WE CAN GO ON
THEN
result = insrtudr (recdesc, ! Rec-desc
.userrecordptr, ! Record
bktdesc, ! Bucket
splitbd1, ! Extra-1
splitbd2); ! Extra-2
!+
! IF EITHER CHKDUP, LOCKIT, OR INSRTUDR RETURNED AN ERROR, WE
! MUST CLEAN UP OUR OPERATIONS.
!-
IF .result EQL false THEN cleanup (bktdesc);
!+
! WE MUST NOW SAVE THE ADDRESS WITHIN THE DATA BUCKET OF THE
! THE RECORD WE JUST INSERTED
!-
addressofrecord = .recdesc [rdrecptr];
!+
! ** IF IT IS SEQ $PUT AND A BUCKET SPLIT(ONE WAY) OCCURRED **
! ** WITH R-NEW GOING TO A NEW BUCKET, THEN THE ORIG BKT WAS **
! ** FLUSHED IN INSRTUDR SO WE MUST MAKE THE SPLIT BUCKET **
! ** THE CURRENT BKT... **
!-
IF seqadr ! SEQ ACCESS
THEN
IF flushorigbd (recdesc) NEQ 0
THEN
BEGIN
movebktdesc (splitbd1, ! From
bktdesc); ! To
clrflag (recdesc [rdstatus], rdflgnewinnew);
END;
!+
! AT THIS POINT, BOTH THE DATA BUCKET AND THE INDEX
! ARE STILL LOCKED. WE MUST UPDATE THE INDEX STRUCTURE
! (IF NECESSARY) AND THEN UNLOCK ALL THESE BUCKETS
!-
IF idxupdateflag (recdesc) NEQ 0
THEN ! We must update the index
BEGIN
IF idxupdate (recdesc, ! Record desc
bktdesc, ! Bucket
splitbd1, ! Extra-1
splitbd2) EQL false ! Extra-2
THEN
setidxerrorflag (recdesc) ! Remember the error
END;
!+
! MOVE THE RFA OF THIS RECORD INTO THE RRV ADDRESS
! IN THE RECORD DESCRIPTOR PACKET, AND INTO THE CURRENT
! RP ADDRESS IN THE RST (SO IT CAN BE RETURNED TO THE
! USER ON RETURN FROM PUTIDX)
!-
rst [rstdatarfa] = (secrecdesc [rdrrv] = .recdesc [rdrfa]); ! MOVE RFA TO RRV
secrecdesc [rdstatus] = .recdesc [rdstatus]; ! SAVE STATUS BITS
!+
! LOOP OVER ALL KEY DESCRIPTORS
!-
keyofreference = refprimary; ! INITIALIZE TO 0
WHILE (kdb = .kdb [kdbnxt]) NEQ 0 DO
BEGIN
!+
! BUMP THE CURRENT KEY OF REFERENCE
!-
keyofreference = .keyofreference + 1;
!+
! MAKE SURE RECORD IS LONG ENOUGH TO CONTAIN
! THIS SECONDARY KEY VALUE
!-
IF .rab [rabrsz, 0] GEQ .kdb [kdbminrsz]%(AND)%%(THIS KEY IS NOT THE NULL KEY VALUE)%
THEN
BEGIN ! Put record into sec index
rtrace (%STRING (' Inserting record into sec idx', !
%CHAR (13), %CHAR (10)));
!+
! INSERT THIS RECORD IN THE SECONDARY INDEX
!-
IF putsidr (secrecdesc) EQL false THEN removrecord (recdesc, bktdesc);
!+
! WE MUST NOW MOVE THE FLAGS FROM THIS RECORD
! DESCRIPTOR INTO THE PRIMARY RECORD DESCRIPTOR.
! THUS, IF WE SAW EITHER AN INDEX ERROR OR A
! DUPLICATE SECONDARY, WE MUST REMEMBER IT.
!-
setflag (recdesc [rdstatus], .secrecdesc [rdstatus])
END
END;
!+
! RECORD HAS BEEN INSERTED INTO ALL INDEXES
!-
rtrace (%STRING (' Record has been inserted', !
%CHAR (13), %CHAR (10)));
!+
! UPDATE NRP IF THIS WAS A $PUT SEQUENTIAL
!-
kdb = .fst [fstkdb]; ! SET UP FOR PRIM KEY
recdesc [rdrecptr] = .addressofrecord; ! RESTORE LOC OF RECORD
!+
! ** UPDATE NRP IF THIS WAS A $PUT SEQ **
!-
IF seqadr ! SEQUENTIAL ACCESS
THEN
setnrp (recdesc, bktdesc);
!+
! CHECK FOR DUPLICATE RECORDS
!-
IF samekeyflag (recdesc) NEQ 0 THEN usrsts = su$dup;
!+
! CHECK FOR INDEX UPDATE ERRORS
!-
IF idxerrorflag (recdesc) NEQ 0 THEN usrsts = su$idx;
!+
! GIVE THE DATA BUCKET BACK (IT HAS ALREADY BEEN WRITTEN TO THE FILE
!-
putbkt (false, ! No update
bktdesc);
!+
! UNLOCK THE INDEX STRUCTURE OF THE FILE SO OTHER PROCESSES
! CAN TRAVERSE THE INDEX.
!-
IF locking THEN unlockindex;
!+
! RETURN TO THE $PUT DISPATCHER
!-
RETURN
END; ! End PUTIDX
%SBTTL 'SETPUT - Set up for indexed $PUT'
GLOBAL ROUTINE setput (recdesc) =
! SETPUT
! ======
! ROUTINE TO SET UP THE RECORD DESCRIPTOR PACKET FOR A
! $PUT TO AN INDEXED FILE. THIS ROUTINE PERFORMS
! THE FOLLOWING OPERATIONS:
!
! 1. SET UP THE KEY DESCRIPTOR BLOCK POINTER
! 2. CHECK THE LAST USER KEY IF THIS IS A $PUT SEQ
! 3. CHECK THE USER RECORD SIZE
! 4. COMPUTE THE WORD SIZE (RSZW) OF THE RECORD AND STORE IT
! 5. MOVE THE KEY INTO A TEMPORARY BUFFER
! 6. CHECK FOR OUT-OF-SEQUENCE KEY STRING
! INPUT:
! RECDESC = RECORD DESCRIPTOR PACKET
! OUTPUT:
! <NO STATUS RETURNED>
! FIELDS IN THE RECORD DESC. WHICH ARE MODIFIED:
! USRSIZE = SIZE OF USER KEY STRING
! USERPTR = ADDRESS OF PRIMARY KEY STRING
! ROUTINES CALLED:
! CKEYUI
BEGIN
MAP
recdesc : REF BLOCK;
LOCAL
datarecordptr : BLOCK [1], ! ADDR OF USER DATA RECORD
cbkdptr : REF BLOCK, ! PTR TO CURRENT BUCKET DESC
lastkeybuff;
REGISTER
maxrecordsize, ! MAX SIZE OF USER DATA RECORD
tempac,
recordsize; ! CURRENT SIZE OF USER DATA RECORD
TRACE ('SETPUT');
!+
! SET UP THE KDB POINTER FOR PRIMARY KEY
!-
kdb = .fst [fstkdb];
!+
! RELEASE THE CURRENT BUCKET, IF ANY
!-
releascurentbkt;
!+
! CHECK IF USER'S RECORD IS TOO BIG FOR A BUCKET
!-
maxrecordsize = (.kdb [kdbdbkz]^b2w); ! SIZE OF BUCKET
maxrecordsize = .maxrecordsize - bhhdrsize - .kdb [kdbhsz];
recordsize = (rst [rstrsz] = .rab [rabrsz, 0]); ! GET RECORD SIZE
IF (rst [rstrszw] = (recdesc [rdlength] = sizeinwords (.recordsize, .fst [fstbsz]))) GTR .maxrecordsize
THEN
usererror (er$rsz);
!+
! CHECK THAT THE RECORD CONTAINS THE PRIMARY KEY
!-
IF .recordsize LSS .kdb [kdbminrsz]
THEN ! Primary key not in record
usererror (er$rsz);
!+
! WE WILL NOW MOVE THE PRIMARY KEY TO A TEMPORARY
! BUFFER TO SAVE TIME
!-
datarecordptr = .rab [rabrbf, 0];
! If section number is 0, default to same section as the RAB
IF .datarecordptr<lh> EQL 0 THEN datarecordptr = .datarecordptr OR .blksec;
movekey (.datarecordptr, tbuffer);
!+
! SET UP THE RECORD DESCRIPTOR TO INDICATE THAT THE
! KEY STRING RESIDES IN OUR TEMPORARY BUFFER
!-
!+
! ***NEXT INSTR. ASSUMES THAT RDFLAGS AND RDSTATUS ARE
! IN WORD 0 *********
!-
recdesc [wholeword] = 0;
recdesc [rduserptr] = tbuffer;
recdesc [rdusersize] = .kdb [kdbksz]; ! USE FULL KEY SIZE
!+
! IF THIS IS A SEQUENTIAL $PUT OPERATION, WE MUST CHECK
! THAT THE CURRENT KEY IS HIGHER THAN THE LAST KEY USED
!-
IF seqadr
THEN
BEGIN
!+
! IF THE LAST OPERATION WAS ALSO A $PUT SEQUENTIAL,
! THEN WE MUST COMPARE THE KEYS
!-
IF .rst [rstlastoper] EQL c$put
THEN
IF (chkflag (rst [rstflags], flglastseq) NEQ 0)
THEN
BEGIN
lastkeybuff = .rst [rstkeybuff]; ! GET ADDR OF LAST KEY
IF ckeykk (.recdesc, ! Rec desc
.lastkeybuff) EQL true ! Last key
!+
! IS THIS KEY GTR THAN THE LAST ONE?
!-
!+
! NOTE THAT CKEYKK RETURNS TRUE ONLY IF THE
! SEARCH KEY IS LEQ THE TARGET KEY, THUS WE
! ACTUALLY WANT THIS ROUTINE TO FAIL FOR OUR
! KEY COMPARISON
!-
THEN
usererror (er$seq)
END;
!+
! INDICATE THAT THIS OPERATION IS SEQUENTIAL
!-
setflag (rst [rstflags], flglastseq)
END
ELSE ! Random put...clear seq bit
clrflag (rst [rstflags], flglastseq);
RETURN true
END; ! End SETPUT
END
ELUDOM