Trailing-Edge
-
PDP-10 Archives
-
bb-h240e-bm_decnet-20_v4_0_dist
-
dn20/cexlib.m11
There are 15 other files named cexlib.m11 in the archive. Click here to see a list.
; [Beginning of CEXLIB]
;
; COPYRIGHT (C) 1980, 1981, 1982
; DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASSACHUSETTS 01754
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE FOR USE ONLY ON A SINGLE
; COMPUTER SYSTEM AND MAY BE COPIED ONLY WITH THE INCLUSION OF THE
; ABOVE COPYRIGHT NOTICE. THIS SOFTWARE, OR ANY OTHER COPIES THEREOF,
; MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON
; EXCEPT FOR USE ON SUCH SYSTEM AND TO ONE WHO AGREES TO THESE LICENSE
; TERMS. TITLE TO AND OWNERSHIP OF THE SOFTWARE SHALL AT ALL TIMES
; REMAIN IN DEC.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
; AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
; CORPORATION.
;
; DEC ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
; SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DEC.
;
;++
; FACILITY: MCB Communications Executive
;
; FUNCTIONAL ABSTRACT:
;
; This module contains the Comm/Exec specific macros
;
; ENVIRONMENT: RSX kernel mode with EIS
;
; AUTHOR: Alan D. Peckham, CREATION DATE: 20-MAR-80
;
; MODIFIED BY:
;
; 01 - Use macros from MCBLIB.
; 02 - Add CCB length variable.
; Add CE$CLN status code.
; 03 - Add SF.ACT flag to SYNCH block.
; Add CE$SYN status code.
; 04 - Add CF.ACT flag for active CCBs.
; Add SDB header definitions and CE$SBO status code.
; 05 - Add status codes.
; Alter CRSH$S macro to call $CRSH
; 06 - Reorder status codes and create macros
; to define them globally.
; 07 - Alter PS access.
; 08 - PDT re-ordered.
; 09 - SYNCH block augmented for LLC use.
; 10 - Add CCBCK$ macro for CCB/RDB verification.
; Alan D. Peckham, 9-Dec-80: VERSION 3.1
; 11 - Rework PDT, SLT, PHD, CETAB macros.
; Alan D. Peckham, 21-Jan-81: VERSION 3.2
; 12 - Update to use process descriptor block addresses internally.
; 13 - Add partition size to process header.
; 14 - Add RSX dispatch address to process header.
;--
;
; CONFIGURATION VARIABLES
;
C$$QUE = 1 ; Free pool queues instead of stacks.
D$$BUG = 0 ; Debugging code disabled.
M$$MGE = 1 ; Memory management present.
P$$BPS = 1 ; Processor status is byte in I/O page
P$$MAX = 64. ; Maximum number of processes.
P$$WPS = 1 ; Processor status is word in I/O page
;
; INCLUDE FILES:
;
.MCALL CCBDF$,TMBDF$
.MCALL MAP$,MAP$S,POP$S,PUSH$S,SMAP$,SMAP$S
;
; MACROS:
;
.IF NE,P$$WPS+P$$BPS
.MACRO MFPS dst
.GLOBL PS
.IF NE,P$$BPS
MOVB @#PS,dst
.IFF
MOV @#PS,dst
.ENDC
.ENDM MFPS
.MACRO MTPS src
.GLOBL PS
.IF NE,P$$BPS
MOVB src,@#PS
.IFF
MOV src,@#PS
.ENDC
.ENDM MTPS
.ENDC
.MACRO DSABL$
MFPS -(SP)
.IF NE,P$$WPS
.GLOBL PS
MOVB #340,@#PS
.IFF
MTPS #340
.ENDC
.ENDM DSABL$
.MACRO ENABL$
MTPS (SP)+
.ENDM ENABL$
.MACRO ILVL$
.IF NE,D$$BUG
CALL $ILVCK ; Crash if not at interrupt level.
.ENDC
.ENDM ILVL$
.MACRO PLVL$
.IF NE,D$$BUG
CALL $PLVCK ; Crash if not at process level.
.ENDC
.ENDM PLVL$
.MACRO RLVL$
.IF NE,D$$BUG
CALL $RLVCK ; Crash if not at RSX level.
.ENDC
.ENDM RLVL$
.MACRO CCBCK$
.IF NE,D$$BUG
CALL $CCBCK ; Crash if not at RSX level.
.ENDC
.ENDM CCBCK$
.MACRO CRSH$S code
.GLOBL $CRSH
CALL $CRSH ; MCB will NOT return !
.iif ndf,CE$'code, .globl CE$'code
.WORD CE$'code
.ENDM CRSH$S
;
; EQUATED SYMBOLS:
;
MCBDF$ ; MCB status definitions.
CCBDF$ ; CCB symbol definitions.
SYNDF$ ; SYNCH block symbol definitions.
TMBDF$ ; TMB symbol definitions.
.ASECT
;
; data base descriptor table
;
. = 0
Z.DSP: .BLKW 1 ; Relocation bias of process
.BLKW 1 ; Dispatch table address
Z.DAT: .BLKW 2 ; Bias/Address of data base
Z.PIX: .BLKB 0 ; Process index
Z.FLG: .BLKW 1 ; Flags word:
ZF.DTM = 100000 ; Data base timer enabled
ZF.RDB = 040000 ; RDB has been requested
ZF.CCB = 010000 ; CCB has been requested
ZF.KIL = 004000 ; Process destruction requested
ZF.DAT = 001000 ; Data base included
ZF.UCB = 000400 ; UCB address included
; 000377 ; (process index)
Z.UCB: .BLKW 1 ; Address of RSX driver UCB
Z.LEN: .BLKW 0
;
; System line table
;
. = 0
L.DDM: .BLKB 1 ; DDM process descriptor block
L.LIX: .BLKB 1 ; Line index
L.DLC: .BLKB 1 ; DLC process descriptor block
L.CTL: .BLKB 1 ; Controller number
L.LLC: .BLKB 1 ; LLC process descriptor block
L.UNT: .BLKB 1 ; Unit number
L.DEV: .BLKW 1 ; Pointer to device name
L.LEN: .BLKW 0
;
; Interrupt transfer block
;
. = 0
X.JSR: .BLKW 2 ; "JSR R5,@#$INTCn" instruction
X.PDB: .BLKW 1 ; Address of process descriptor block
X.DSP: .BLKW 1 ; Address of interrupt dispatch
X.LEN: .BLKW 0
;
; Process header
;
. = 120000
PHDNAM: .BLKW 1 ; Process name in Radix-50
PHDMCB: .BLKB 2 ; MCB version number
PHDBLK: .BLKW 1 ; Number of blocks in partition
PHDPAT: .BLKW 1 ; Next available patch location
; or zero if none available.
PHDSIG: .BLKW 1 ; SIGNAL handling routine adr
PHDLLC: .BLKW 1 ; LLC dispatch vector adr
PHDDLC: .BLKW 1 ; DLC dispatch vector adr
PHDDDM: .BLKW 1 ; DDM dispatch vector adr
PHDCEX: .BLKW 2 ; Comm/Exec identification
; in Radix-50
PHDIDN: .BLKW 2 ; Process identification
; in Radix-50
PHDFLG: .BLKW 1 ; Process flags:
PFLBLI = 000400 ; Process written in BLISS
PFLRSX = 001000 ; RSX dispatch vector included
PHDRSX: .BLKW 1 ; RSX dispatch vector adr
PHDCTB: .BLKW 1 ; CEX process dispatch vector adr
.BLKW 1 ; (reserved)
;
; CCB extensions
;
. = C.OWN
C.FLG: .BLKW 1 ; Flags:
CF.USE = 002000 ; CCB has been used
CF.ACT = 001000 ; CCB is allocated
CF.RDB = 000400 ; CCB has attached RDB
; = 000377 ; (Process index of CCB owner)
. = C.PRM5+2
C.DST: .BLKW 1 ; Destination process descriptor block
C.SRC: .BLKW 1 ; Source process descriptor block
.EVEN
C.LEN: .BLKW 0
;
; CCB pool entry.
;
. = 0
P.CSIZ: .BLKW 1 ; Size of attached buffer.
P.CNUM: .BLKW 1 ; Number of CCBs allocated.
P.CALF: .BLKW 1 ; Number of allocation failures.
.IF NE,C$$QUE
P.CQUE: .BLKW 2 ; Free CCB queue.
.IFF
P.CSTK: .BLKW 1 ; Free CCB stack.
.ENDC
P.CCNT: .BLKW 1 ; Number of CCBs free.
P.CREQ: .BLKW 1 ; Number of CCB requests.
P.CPDB: .BLKW 1 ; Last process serviced.
P.CFLG: .BLKW 1 ; PDB request flag.
P.CFNC: .BLKB 1 ; Request dispatch function.
P.CMOD: .BLKB 1 ; Request dispatch modifier.
P.CACB: .BLKW 1 ; Allocated core bias.
P.CACL: .BLKW 1 ; Allocated core length (in blocks).
P.CADA: .BLKW 1 ; Allocated DSR address.
P.CADL: .BLKW 1 ; Allocated DSR length (in bytes).
P.CLEN: .BLKW 0 ; Length of entry.
;
; Buffer pool entry.
;
. = 0
P.BSIZ: .BLKW 1 ; Size of this buffer.
P.BCNT: .BLKW 1 ; Number of available buffers.
P.BQUE: .BLKW 4 ; Queue of buffers.
P.BALF: .BLKW 1 ; Number of allocation failures.
P.BNUM: .BLKW 1 ; Number of pre-allocated buffers.
P.BACB: .BLKW 1 ; Allocated core bias.
P.BACL: .BLKW 1 ; Allocated core length (in blocks).
P.BLEN: .BLKW 0 ; Length of entry.
;
; Exception vector
;
. = 0
E.LVL: .BLKW 1 ; Exception level.
E.PDB: .BLKW 1 ; Address of process descriptor block.
E.DSP: .BLKW 1 ; Dispatch address.
E.ENA: .BLKW 1 ; Enable vector address.
E.LEN: .BLKW 0 ; Length of exception vector.
. = 0
.PSECT
;
; CE: Data base creation
;
.MACRO SYS$DF sysnam,sysnum
.MACRO BFP$CK siz,max,min
BFPNUM = BFPNUM+1
UCB$P INI5
.WORD siz,0
.WORD 0,0,0,0
.WORD 0
.WORD 0
.IF NB,<min>
.WORD max,min
.IFF
.WORD max,max
.ENDC
UCB$E
.ENDM BFP$CK
.MACRO BUF$DF ccbn,ccbl,rdbn,rdbl,sdbn,sdbl,ldbt
.IF NE,<ccbl-C.LEN>
.ERROR C.LEN; CCB size skew (ccbl)
.ENDC
.IF NE,<rdbl-RDB.sz>
.ERROR RDB.sz; RDB size skew (rdbl)
.ENDC
.IF GT,<sdbl-RDB.sz>
.ERROR RDB.sz; SDB size too large (sdbl)
.ENDC
CE.CBL = ccbn
CE.CBH = ccbn
CE.RBL = rdbn
CE.RBH = rdbn
.ENDM BUF$DF
.MACRO CBP$CK siz,max,min,flg,mod
.IF EQ,siz
CE.CBL = max
.IF NB,<min>
CE.CBH = min
.IFF
CE.CBH = max
.ENDC
.IFF
.IF EQ,<siz-RDB.sz>
CE.RBL = max
.IF NB,<min>
CE.RBH = min
.IFF
CE.RBH = max
.ENDC
.IFF
.ERROR siz; Unsupported CCB/buffer size
.ENDC
.ENDC
.ENDM CBP$CK
.MACRO CTL$DF num,csradr,vecadr,pri
.ENDM CTL$DF
.MACRO DEV$DF nam,numvec
.ENDM DEV$DF
.MACRO DRV$DF nam
.ENDM DRV$DF
.MACRO END$DF
CE$cbb CBP$CK
UCB$P BDAT
.WORD CE.CBH,CE.CBL
.WORD RDB.sz
.WORD CE.RBH,CE.RBL
UCB$E
CE$buf BFP$CK
UCB$P INI5
.WORD 177777,0
UCB$E
UCB$P BDAT
.IRP n,<\PDBNUM+1>
.WORD n ; Number of pre-defined processes
.ENDM
.IRP n,<\PNMNUM>
.WORD n ; Number of process directory entries
.ENDM
.IIF LT,<SLTNUM>,SLTNUM=0
.IRP n,<\SLTNUM>
.IF NE,<n-CE.lix>
.ERROR CE.lix; Does not reflect number of system lines (n)
.ENDC
.WORD n ; Number of system lines
.ENDM
.IRP n,<\BFPNUM>
.WORD n ; Number of buffer pools
.ENDM
UCB$E
UCB$P AUCB
.GLOBL UC.PWF
CEUCB: .WORD CEDCB ; Back pointer to DCB
.WORD .-2 ; Redirect UCB pointer
.BYTE UC.PWF ; Call on power failure
.BYTE 0 ; Unit status
.BYTE 0 ; Physical unit number
.BYTE 0 ; Unit status
.WORD 0 ; Characteristics word 1
.WORD 0 ; Characteristics word 2
.WORD 0 ; Characteristics word 3
.WORD 0 ; Characteristics word 4
.WORD CESCB ; Pointer to SCB
.WORD 0 ; TCB address of
; attached task
.WORD 0,0 ; Buffer address doubleword
.WORD 0 ; Buffer byte count
UCB$E
.PSECT ADCB,D
.GLOBL $CETBL
$CEDAT::
CEDCB: .WORD 0 ; Link to next DCB
.WORD CEUCB ; Pointer to first UCB
.ASCII /CE/ ; Device name
.BYTE 0,0 ; Low and high unit numbers
.WORD CELNG ; Length of UCB
.WORD $CETBL ; Address of driver dispatch table
.WORD 0,0,0,0 ; Masks for bits 0.-15.
.WORD 0,0,0,0 ; Masks for bits 16.-31.
.WORD 0 ; Address of PCB
.PSECT ZSCB,D
CESCB: .WORD 0,.-2 ; Device I/O queue listhead
.BYTE 0*40 ; Device priority
.BYTE 0/4 ; Device vector
.BYTE 0 ; Current timeout count
.BYTE 1 ; Initial timeout count
.BYTE 0*2 ; Controller index
.BYTE 0 ; Controller status
.WORD 0 ; Device CSR address
.BLKW 1 ; Address of current I/O packet
.BLKW 5 ; Fork block
$CEEND::
.PSECT
.ENDM END$DF
.MACRO LLC$DF nam
nam'FLG = nam'FLG!ZF.DAT
.ENDM LLC$DF
.MACRO MEM$DF a0,a1,a2,a3,a4,a5,a6,a7,a8,a9
.ENDM MEM$DF
.MACRO NOD$CK nam
.IF DIF,sysnam,nam
.PRINT ; System name (sysnam) not the node name (nam)
.ENDC
.IF NE,<sysnum-NS.slf>
.PRINT NS.slf; System number (sysnum) not the node number
.ENDC
.ENDM NOD$CK
.MACRO PDB$ pix,flgs,pnm,dsp,dat,unm
.IF IDN,<pnm>,<CEX>
pix = 0
.IFF
PDBNUM = PDBNUM+1
pix = PDBNUM
.ENDC
UCB$P INI1
.RAD50 \pnm\ ; Relocation bias of process
.WORD dsp ; Address of dispatch table
.IF NB,<dat>
dat::.WORD 0,0 ; Bias/address of data base
.IFF
.WORD 0,0 ; No data base
.ENDC
.IRP n,<\flgs+pix>
.WORD n ; Process index and flags
.ENDM
.IF NB,<unm>
unm::.WORD 0 ; Address of RSX driver UCB
.ENDC
UCB$E
.ENDM PDB$
.MACRO PRC$DF nam,dvc
.IF LT,SLTNUM
.IF B,<dvc>
.IIF NDF,nam'FLG,nam'FLG=0
PDB$ nam'PIX,\nam'FLG,nam,PHDLLC,LLC'nam
.IFF
.IIF NDF,nam'FLG,nam'FLG=ZF.UCB
PDB$ nam'PIX,\nam'FLG,nam,PHDLLC,LLC'nam,UCB'nam
.ENDC
PNMNUM = PNMNUM+1
UCB$P INI2
.WORD nam'PIX
.RAD50 \nam\
UCB$E
.ENDC
.ENDM PRC$DF
.MACRO SLT$DF llcnm,dlcnm,ddmnm,ctln,unt,trb,devnm,enb
.IIF LT,<SLTNUM>,SLTNUM=0
SLTNUM = SLTNUM+1
SLT$ \SLTNUM,llcnm,dlcnm,ddmnm,ctln,unt,trb,devnm,enb
.ENDM SLT$DF
.MACRO SLT$D nam,ctl,unt
.IF IDN,<nam>,<DTE>
SLT$N <nam-unt-ctl>
.IFF
.IF NB,<unt>
SLT$N <nam-ctl-unt>
.IFF
SLT$N <nam-ctl>
.ENDC
.ENDC
.ENDM SLT$D
.MACRO SLT$N nam
.NCHR SLTLNG,<nam>
.IRP lng,<\SLTLNG>
.ASCII <lng>/nam/
.ENDM
.ENDM SLT$N
.MACRO SLT$ lix,llcnm,dlcnm,ddmnm,ctl,unt,trb,devnm,enb
SLTLLC = llcnm'PIX
PDB$ SLTDLC,ZF.DTM,dlcnm,\PHDDLC,DLC'lix
.IF NDF,dlcnm'ctl
dlcnm'ctl = SLTDLC
.ENDC
.IF NB,<ddmnm>
.IF B,<trb>
PDB$ SLTDDM,ZF.DTM,ddmnm,\PHDDDM,DDM'lix
.IF NDF,ddmnm'ctl
ddmnm'ctl = SLTDDM
.ENDC
.IFF
.IF EQ,<trb>
PDB$ SLTDDM,ZF.DTM,ddmnm,\PHDDDM,DDM'lix
.IF NDF,ddmnm'ctl
ddmnm'ctl = SLTDDM
.ENDC
.IFF
.IRP plix,<\<lix-1>>
DDM'lix == DDM'plix
.ENDM
.ENDC
.ENDC
.IFF
SLTDDM = 0
.ENDC
UCB$P INI3
.IRP num,<\SLTDDM>
.BYTE num ; DDM data base index
.ENDM
.IRP n,<\lix>
.BYTE n ; Flags and line index
.ENDM
.IRP num,<\SLTDLC>
.BYTE num ; DLC data base index
.ENDM
.BYTE ctl ; Controller number
.IRP num,<\SLTLLC>
.BYTE num ; LLC data base index
.ENDM
.BYTE unt ; Unit number
.WORD 0
UCB$E
UCB$P INI4
.IF NB,<devnm>
SLT$N <devnm> ; Device name
.IFF
.IF NB,<ddmnm>
SLT$D ddmnm,ctl,unt ; Device name
.IFF
.IF NB,<dlcnm>
SLT$D dlcnm,ctl,unt ; Device name
.IFF
SLT$D llcnm,ctl,unt ; Device name
.ENDC
.ENDC
.ENDC
UCB$E
.ENDM SLT$
.MACRO TRB$DF trb,ch0,ch1,ch2,ch3,ch4,ch5,ch6,ch7
.ENDM TRB$DF
.MACRO TSK$DF nam,rsi
.ENDM TSK$DF
.MACRO UCB$E nam
CELNG = .-CEADR+CELNG
.PSECT nam
.ENDM UCB$E
.MACRO UCB$P pre
.PSECT pre,D
CEADR = .
.ENDM UCB$P
.MACRO UNT$DF unt,ch0,ch1,ch2,ch3,ch4,ch5,ch6,ch7
.ENDM UNT$DF
BFPNUM = 0
PDBNUM = 0
PNMNUM = 0
SLTNUM = -1
CELNG = 0
CE$NOD NOD$CK
.ENDM SYS$DF
;
; [End of CEXLIB]