Trailing-Edge
-
PDP-10 Archives
-
bb-jr93k-bb
-
10,7/galaxy/lptspl/lptl03.mac
There are 8 other files named lptl03.mac in the archive. Click here to see a list.
TITLE LPTL03 - LN03 device driver for LPTSPL-10
SUBTTL Kevin O'Kelley 16-OCT-89
;
;
; COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION
; 1984,1985,1986,1987,1990.
; ALL RIGHTS RESERVED.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
; AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS
; SOFTWARE OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
; OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON. NO TITLE TO
; AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE
; WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
; BY DIGITAL EQUIPMENT CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
; OF ITS SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY
; DIGITAL.
;
SEARCH GLXMAC ;SEARCH GALAXY PARAMETERS
SEARCH QSRMAC ;SEARCH QUASAR PARAMETERS
SEARCH ORNMAC ;SEARCH ORION/OPR PARAMETERS
SEARCH LPTMAC ;SEARCH LPTSPL PARAMETERS
PROLOG (LPTL03)
IF2,<PRINTX Assembling GALAXY-10 LPTL03>
SALL ;FOR CLEAN LISTINGS
.DIRECT FLBLST ;FOR CLEANER LISTINGS
ENTRY LPTL03 ;LOAD IF LIBRARY SEARCH
%%.LPT==:%%.LPT ;VERSION
; Dispatch table for this device driver
LPTL03::DEVDSP (L03,<LN03>)
SUBTTL Global routines -- L03INX - Initialize the printer
; Device initialization. This routine is called by the
; SETUP message processor to initialize device dependent
; data in the job data base.
;
; Call: MOVE J, job data base address
; MOVE M, Page containing SETUP message or 0 if LPTSPL startup
; PUSHJ P,L03INX
;
; TRUE return: Initialization complete
; FALSE return: S1 contains -1 if must try a different driver, or
; S1 contains a standard response-to-setup code
; S2 contains any extra attributes (for RSU.FL)
L03INX: JUMPE M,.RETT ;RETURN IF LPTSPL INITIALIZATION
MOVE S1,STREAM## ;GET STREAM NUMBER
MOVE S1,JOBOBA##(S1) ;AND THE OBJECT BLOCK
MOVE S1,OBJ.ND(S1) ;GET STATION NUMBER
PUSHJ P,LPTANF## ;MUST BE ANF-10
SKIPN J$LLAT(J) ; OR A LAT LINE
JUMPF INIT.1 ;NO: NOT OUT KIND OF DEVICE
MOVE S1,SUP.ST(M) ;GET DEVICE NAME
PUSHJ P,LPTLIN## ;GENERATE DEVICE NAME
JUMPF INIT.1 ;DEVICE NOT OUR TYPE
MOVE T1,J$LDEV(J) ;GET DEVICE NAME
DEVCHR T1,UU.PHY ;GET DEVICE CHARACTERISTICS
TXNE T1,DV.TTY ;DEFEND AGAINST NUL
TXNE T1,DV.DSK ; OR NOT A TTY
JRST INIT.3 ; OR CONTROLLING A JOB
MOVE T1,[2,,T2] ;SET UP UUO AC
MOVEI T2,.TOTRM ;WANT TO READ TERMINAL TYPE
MOVE T3,J$LION(J) ;GET I/O INDEX
TRMOP. T1, ;READ TERMINAL TYPE
JRST INIT.3 ;PREHISTORIC MONITOR
CAME T1,['LN03 '] ;CORRECT TERMINAL TYPE?
JRST INIT.3 ;NO, DEVICE IS NOT FOR US
MOVEM T1,J$LTYP(J) ;SAVE AS UNIT TYPE FOR QUASAR
HRLZI T1,LPTL03 ;POINT TO DISPATCH TABLE
HRRI T1,J$$DEV(J) ;MAKE A BLT POINTER
BLT T1,J$$DND(J) ;COPY INTO JOB STORAGE AREA
SETOM J$LLCL(J) ;LN03 DOES LOWER CASE
SETOM J$POSF(J) ;LN03 DOES POSITIONING
SETOM J$FFDF(J) ;LN03 DOES FORMFEEDS
SETOM J$MNTF(J) ;LN03 SUPPORTS MOUNTABLE FORMS
MOVE S1,%RSUOK ;GET RESPONSE TO SETUP CODE
SETZ S2, ;NO EXTRA ATTRIBUTES
$RETT
INIT.1: MOVNI S1,1 ;-1 MEANS DEVICE NOT FOR US
$RETF ;RETURN
INIT.2: SKIPA S1,[%RSUNA] ;UNIT NOT AVAILABLE
INIT.3: MOVEI S2,%RSUDE ;UNIT WILL NEVER BE AVAILABLE
$RETF ;RETURN
SUBTTL Global routines -- L03IPC - Special IPCF message processing
; This routine will process any special messages peculiar to
; the device driver.
;
; Call: MOVE M, IPCF message address
; MOVE S2, message type
; PUSHJ P,L03IPC
;
; TRUE return: Message processed by this driver
; FALSE return: Message unknown to this driver
; S1 must contain -1, S2 must be preserved
L03IPC: MOVNI S1,1 ;WE HAVE NO SPECIAL MESSAGE
$RETF ;RETURN
SUBTTL Global routines -- L03SCD - Scheduler call
; This routine is provided for drivers which must do special
; things at LPTSPL job scheduler level. For most drivers, it
; is a no-op.
;
; Call: MOVE J, job data base address
; MOVE P1, stream number
; PUSHJ P,L03SCD
;
; TRUE return: Always
; FALSE return: Never
L03SCD::$RETT ;RETURN
SUBTTL Global routines -- L03WAK - Wakeup timer check
; This routine is provided for special devices that may have
; critical time dependencies. The driver is called buy the
; CHKTIM routine to see if a premature wakeup is necessary.
;
; Call: MOVE J, job data base address
; MOVE S1, current UDT
; MOVE S2, normal wakeup time
; PUSHJ P,L03WAK
;
; TRUE return: OK to zero JOBWKT if needed
; FALSE return: Never zero JOBWKT under any circumstances
;
; On either return, S1 must be preserved and S2 may be altered to
; contain the desired wakeup time. Most drivers will always want
; their JOBWKT entry zeroed unless their keeping track of several
; wakeup times.
L03WAK: $RETT ;RETURN
SUBTTL Global routines -- L03OPX - OPEN device
; This routine will setup device specific information for an OPEN.
;
; Call: MOVE J, job data base address
; PUSHJ P,L03OPX
;
; TRUE return: Appropriate response-to-setup code returned in S1
; FALSE return: ditto
L03OPX: MOVEI T1,.IOPIM ;OPEN MODE
PUSHJ P,LPTOPN## ;SETUP I/O, OPEN CHANNEL, ETC.
JUMPF OPEN.1 ;CAN'T HAVE IT RIGHT NOW
PUSHJ P,INTCNL## ;CONNECT TO INTERRUPT SYSTEM
JUMPF OPEN.2 ;GIVE UP
TXO S,INTRPT ;INDICATE WE'RE CONNECTED
MOVEI S1,%RSUOK ;LOAD THE CODE
$RETT ;RETURN
OPEN.1: SKIPA S1,[%RSUNA] ;UNIT NOT AVAILABLE
OPEN.2: MOVEI S2,%RSUDE ;UNIT WILL NEVER BE AVAILABLE
$RETF ;RETURN
SUBTTL Global routines -- L03CLS - CLOSE device
; This routine is called to CLOSE the channel. In simple
; drivers which use standard TOPS-10 I/O facilities, this
; is accomplished with a CLOSE or RESDV. UUO.
;
; Call: MOVE J, job data base address
; PUSHJ P,L03CLS
;
; TRUE return: Always
; FALSE return: Never
L03CLS: PJRST LPTCLS## ;CALL COMMON CLOSE ROUTINE
SUBTTL Global routines -- L03FLS - Flush a job
; This routine is called whenever a job is to be flushed.
; Most drivers don't need to do anything special and a
; common routine in LPTSPL can be called.
;
; Call: MOVE J, job data base address
; PUSHJ P,L03FLS
;
; TRUE return: Always
; FALSE return: Never
L03FLS: PJRST LPTFLS## ;CALL COMMON FLUSH ROUTINE
SUBTTL Global routines -- L03FVU - Load VFU
; This routine is called to load the VFU for a printer.
;
; Call: MOVE J, job data base address
; PUSHJ P,L03VFU
;
; TRUE return: VFU loaded or no VFU needed
; FALSE return: VFU load failed
L03VFU: $RETT ;DO NOTHING
SUBTTL Global routines -- L03RAM - Load RAM
; This routine is called to load the character translation
; RAM for a printer.
;
; Call: MOVE J, job data base address
; PUSHJ P,L03RAM
;
; TRUE return: RAM loaded or no RAM needed
; FALSE return: RAM load failed
L03RAM: $RETT ;DO NOTHING
SUBTTL Global routines -- L03LER - File LOOKUP error processing
; This routine is provided for special devices which accumulate
; LPTSPL run log data differently than most.
;
; Call: MOVE J, job data base address
; PUSHJ P,L03LER
;
; TRUE return: Never
; FALSE return: Always
L03LER: PJRST LPTLER## ;CALL COMMON ERROR ROUTINE
SUBTTL Global routines -- L03IER - File input error processing
; This routine is provided for special devices which accumulate
; LPTSPL run log data differently than most.
;
; Call: MOVE J, job data base address
; PUSHJ P,L03IER
;
; TRUE return: Never
; FALSE return: Always
L03IER: PJRST LPTIER## ;CALL COMMON ERROR ROUTINE
SUBTTL Global routines -- L03OUT - Output a buffer
; This routine is provided for special devices that cannot
; use the conventional output routine (LPTOUT) or must first
; condition the data before doing the output.
;
; Call: MOVE J, job data base address
; PUSHJ P,L03OUT
;
; TRUE return:
; FALSE return:
L03OUT: PJRST LPTOUT## ;CALL COMMON OUTPUT ROUTINE
SUBTTL Global routines -- L03OER - Output error processing
; This routine provides for driver or device-specific I/O error
; processing. When called, both S1 and J$LIOS(J) will contain
; the returned I/O error status bits (GETSTS information). No
; attempt will be made to determine the validity or severity of
; any errors. That is left for the driver.
;
; Call: MOVE S1,J$LIOS(J) ;Justed updated with physical GETSTS
; MOVE S2,J$XIOS(J) ;Just updated with physical DEVOP.
; PUSHJ P,L03OER
;
; TRUE return: No output error or error recovery sucessful
; FALSE return: Unrecoverable output error
L03OER: PJRST LPTOER## ;CALL COMMON ERROR ROUTINE
SUBTTL Global routines -- L03EOX - Output EOF processing
; This routine is called at the end of the job to do special
; EOF processing for the device being used.
;
; Call: MOVE J, job data base address
; PUSHJ P,L03EOX
;
; TRUE return: Always
; FALSE return: Never
L03EOX: $TEXT (SENDCH,<^T/RIS/^A>) ;RESET TO INITIAL STATE
$RETT ;
SUBTTL Global routines -- L03BJB - Begining of job
; This routine is called at the begining of job processing.
; It is used to reset device dependent job parameters such
; as switching back to a default font.
;
; Call: MOVE J, job data base address
; PUSHJ P,L03BJB
;
; TRUE return: Always
; FALSE return: Never
L03BJB: SETOM J$XTOP(J) ;TOP OF PAGE
$TEXT (SENDCH,<^T/RIS/^A>) ;RESET TO INITIAL STATE
PJRST L03WID ;CHANGE TO 132-CHARACTER MODE
SUBTTL Global routines -- L03EJB - End of job
; This routine is called at the end of job processing.
;
; Call: MOVE J, job data base address
; PUSHJ P,L03EJB
;
; TRUE return: Always
; FALSE return: Never
L03EJB: $RETT ;NO SPECIAL HANDLING
SUBTTL Global routines -- L03BFL - Begining of input file
; This routine is called at the begining of input file
; processing. It; is used to reset device dependent file
; parameters such as non-sticky font specs and attributes.
;
; Call: MOVE J, job data base address
; PUSHJ P,L03BFL
;
; TRUE return: Print file
; FALSE return: Do not print file
L03BFL: PUSHJ P,SENDFF## ;SKIP TO TOP OF PAGE
LOAD S1,.FPINF(E),FP.FPF ;GET /PRINT
CAIE S1,%FPGRF ;IS THIS FILE GRAPHICS?
TDZA S1,S1 ;NO, CLEAR THE BREAK MASK
MOVEI S1,[EXP -1,-1,-1,-1] ;YES, BREAK ON ALL CHARACTERS
MOVEM S1,J$DBRK(J) ;SAVE THE BIT MASK
JUMPN S1,BFIL.1 ;GRAPHICS: USE PORTRAIT
SKIPN S1,J$FORM(J) ;DID USER SPECIFY A FORM TYPE?
JRST BFIL.1 ;NO, ASSUME NORMAL FONT
CAME S1,[SIXBIT /NORMAL/] ;
CAMN S1,[SIXBIT /NARROW/] ;DOES USER WANT PORTRAIT?
TRNA ;YES, DO IT (JUST LIKE THE LN01)
JRST BFIL.2 ;NO, USE LANDSCAPE
BFIL.1: $TEXT (SENDCH,<^T/RIS/^A>) ;RESET TO INITIAL STATE
$TEXT (SENDCH,<^T/PORT/^A>) ;USE PORTRAIT
MOVEI C,.CHCRT ;
PUSHJ P,PHSOUT## ;RESET CARRIAGE
MOVEI S1,^D80 ;CHANGE WIDTH TO 80
MOVEM S1,J$FWID(J) ;
MOVEI S1,2 ;CHANGE WIDTH CLASS TO 2
MOVEM S1,J$FWCL(J) ;
$RETT ;
BFIL.2: $TEXT (SENDCH,<^T/RIS/^A>) ;RESET TO INITIAL STATE
$TEXT (SENDCH,<^T/LAND/^A>) ;USE LANDSCAPE
MOVEI C,.CHCRT ;
PUSHJ P,PHSOUT## ;RESET CARRIAGE
PJRST L03WID ;CHANGE WIDTH TO 132
SUBTTL Global routines -- L03EFL - End of input file
; This routine is called at the end of input file
; processing.
;
; Call: MOVE J, job data base address
; PUSHJ P,L03EFL
;
; TRUE return: Continue file processing
; FALSE return: Do not print additional copies of file
L03EFL: $RETT ;NO SPECIAL HANDLING
SUBTTL Global routines -- L03BAN - Banner initialization
; This routine is called at the start of banner processing.
; It is used to alter the appearance if a banner page. For
; example, a special font or page orientation could be selected
; at this time and it would only affect the printing of the
; banner page.
;
; Call: MOVE J, job data base address
; PUSHJ P,L03BAN
;
; TRUE return: Always
; FALSE return: Never
L03BAN:
; PJRST L03HDR ;FALL INTO L03HDR
SUBTTL Global routines -- L03HDR - Header initialization
; This routine is called at the start of header processing.
; It is used to alter the appearance if a header page. For
; example, a special font or page orientation could be selected
; at this time and it would only affect the printing of the
; header page.
;
; Call: MOVE J, job data base address
; PUSHJ P,L03HDR
;
; TRUE return: Always
; FALSE return: Never
L03HDR: JUMPE S1,L03WID ;ZERO: JUST SET PARAMETERS
SETOM J$XTOP(J) ;TOP OF PAGE
$TEXT (SENDCH,<^T/RIS/^A>) ;RESET TO INITIAL STATE
$TEXT (SENDCH,<^T/HEAD/^A>) ;USE SPECIAL LANDSCAPE
$TEXT (SENDCH,<^T/BOX/^A>) ;DRAW A BOX AROUND IT
MOVEI C,.CHCRT ;MAKE SURE (AB)USER DIDN'T
PUSHJ P,PHSOUT## ;LEAVE THE CARRIAGE SOMEPLACE STRANGE
PJRST L03WID ;CHANGE TO 132-CHARACTER MODE
SUBTTL Global routines -- L03WID - Header width initialization
; This routine is called to initialize the page width for
; header processing. It is needed because page orientation
; (determined by LPTL03) could affect the width of the page
; hence, the number of characters that may be printed on a
; single line.
;
; Call: MOVE J, job data base address
; PUSHJ P,L03WID
;
; TRUE return: Always
; FALSE return: Never
L03WID: MOVEI S1,^D132 ;CHANGE WIDTH TO 132
MOVEM S1,J$FWID(J) ;
MOVEI S1,3 ;CHANGE ASSOCIATED WIDTH CLASS
MOVEM S1,J$FWCL(J) ;
$RETT ;RETURN
SUBTTL Global routines -- L03RUL - Ruler processing
; This routine is called to output the ruler lines between jobs.
;
; Call: MOVE J, job data base address
; PUSHJ P,L03RUL
;
; TRUE return: Always
; FALSE return: Never
L03RUL: $RETT ;NO SPECIAL RULER ACTION
SUBTTL Global routines -- L03SHT - Stream shutdown
; This routine is called when a stream is shutdown, just
; prior to releasing the job data page.
;
; Call: MOVE J, job data base address
; PUSHJ P,L03SHT
;
; TRUE return: Always
; FALSE return: Never
L03SHT: $RETT ;NO SPECIAL HANDLING
SUBTTL Global routines -- L03STS - Status message generation
; This routine allows a driver to append device specific data to the
; status update message text which is sent to QUASAR. This text is
; appears on queue listings and SHOW STATUS displays. It appears as
; the second line of request or unit status display. LPTSPL will start
; the text with " Started at ...". The driver may then append useful
; information such as "printed 47 out of 56 pages".
L03STS::PJRST LPTSTS## ;CALL COMMON CODE
SUBTTL Global routines -- L03CHR - File data intercept
; This routine is called for file data only, if the character in C
; is in the break mask pointed to by J$DBRK and the special interpretation
; (graphics) flag is set. (J$FASC .LT. 0) See FILCHR.
;
; Call: MOVE J, job data base address
; MOVE C, break character
; PUSHJ P,L03CHR
;
; TRUE return: Break condition handled
; FALSE return: Abort job (eg, error in escape sequence)
L03CHR: PJRST PHSOUT## ;NO SPECIAL HANDLING: PUT IT
SUBTTL Global routines -- L03CHO - Character translator
; This routine will handle character translation. Called when a character
; is about to be sent to what everyone else thinks is the physical device.
; It simulates a hardware translation RAM.
;
; Call: MOVE J, job data base address
; MOVE C, intercepted character
; PUSHJ P,L03CHO
;
; TRUE return: Character translated if necessary, caller to output
; FALSE return: Character processed here, nothing to output
L03CHO: $RETT ;NO SPECIAL HANDLING
SUBTTL Control sequences
; Beginning of an escape sequence
;
DEFINE SEQBGN,<
..WRD=0
> ;End DEFINE SEQBGN
; Body of an escape sequence
;
DEFINE SEQ (ARGS),<
IRP (ARGS),<
IFIDN <ARGS><ESC>,<SEQADD (.CHESC)>
IFDIF <ARGS><ESC>,<IRPC (ARGS),<SEQADD ("ARGS")>>
> ;End IRP
> ;End DEFINE SEQ
; End of an escape sequence
;
DEFINE SEQEND,<
IFE <..WRD>,<EXP 0>
IFN <..WRD>,<
SEQADD <0>
SEQADD <0>
SEQADD <0>
SEQADD <0>
> ;End IFN
IF2 <PURGE ..WRD>
> ;End DEFINE SEQBGN
; Helpful macro to add a character
;
DEFINE SEQADD (CHR),<
..WRD=<..WRD_7>+CHR
IFN <..WRD&177B7>,<
EXP <..WRD_1>
..WRD=0
> ;End IFN
> ;End DEFINE SEQADD
RIS: SEQBGN
SEQ <ESC,c> ; RIS/Reset to initial state
SEQEND
PORT: SEQBGN
SEQ <ESC,[?20 J> ; PFS/Page format select
SEQ <ESC,[1;80s> ; SLRM/Set left/right margins
SEQ <ESC,[1;66r> ; STBM/Set top/bottom margins
SEQ <ESC,[3g> ; TBC/Tabulation clear
SEQ <ESC,[9;17;25;33;41;49;57;65;73u>
SEQEND
LAND: SEQBGN
SEQ <ESC,[?21 J> ; PFS/Page format select
SEQ <ESC,[87 C> ; GSS/Graphic size selection
SEQ <ESC,[100;76 B> ; GSM/Graphic size modification
SEQ <ESC,[87;54 G> ; SPI/Spacing pitch increment
SEQ <ESC,[5;136s> ; SLRM/Set left/right margins
SEQ <ESC,[1;67r> ; STBM/Set top/bottom margins
SEQ <ESC,[15m> ; SGR/(LANDSCAPE font)
SEQ <ESC,[3g> ; TBC/Tabulation clear
SEQ <ESC,[13;21;29;37;45;53;61;69;77;>
SEQ <85;93;101;109;117;125;133u>
SEQEND
HEAD: SEQBGN
SEQ <ESC,[?23 J> ; PFS/Page format select
SEQ <ESC,[87 C> ; GSS/Graphic size selection
SEQ <ESC,[100;76 B> ; GSM/Graphic size modification
SEQ <ESC,[87;54 G> ; SPI/Spacing pitch increment
SEQ <ESC,[7;136s> ; SLRM/Set left/right margins
SEQ <ESC,[4;67r> ; STBM/Set top/bottom margins
SEQ <ESC,[15m> ; SGR/(LANDSCAPE font)
SEQ <ESC,[3g> ; TBC/Tabulation clear
SEQ <ESC,[16;24;32;40;48;56;64;72;80;>
SEQ <88;96;104;112;120;128;136u>
SEQEND
BOX: SEQBGN
SEQ <ESC,[;;;7500;20!|> ; Horizontal lines
SEQ <ESC,[;;5650;7500;20!|> ;
SEQ <ESC,[1;;;5650;20!|> ; Vertical lines
SEQ <ESC,[1;7482;;5650;20!|>;
SEQEND
SENDCH: MOVE C,S1 ;GET THE CHARACTER
PJRST PHSOUT## ;WRITE IT
SUBTTL Literal pool
L03LIT: LIT
L03END::!END