Trailing-Edge
-
PDP-10 Archives
-
bb-l014z-bm_tops20_v7_0_tsu03_1_of_3
-
galsrc/mtrmac.mac
There are 12 other files named mtrmac.mac in the archive. Click here to see a list.
;MTRMAC - Universal file for MOUNTR et al
SUBTTL Preliminaries
; COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1984, 1988.
; ALL RIGHTS RESERVED.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
; ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
; INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
; COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
; OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
; TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
; AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
; CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
; SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
IFNDEF REL,<REl==0> ;if ~0 assemble rel
IFE REL,<
Universal MTRMAC - MOUNTR Macro and Data definitions
IF2,<
PRINTX [Assembling MTRMAC.UNV]
> ; End IF2
.directive .nobin
>
IFN REL,<
Title MTRMAC - MOUNTR Macro and Data definitions
IF2,<
PRINTX [Assembling MTRMAC.REL]
> ; End IF2
>
SALL ;FOR CLEAN LISTINGS
SUBTTL Required files
SEARCH MONSYM
SEARCH MACSYM
SEARCH ACTSYM
SEARCH SERCOD
SEARCH GLXMAC
SEARCH QSRMAC
SEARCH ORNMAC
SUBTTL Version Information
MACMAN==:57 ;Maintenance edit number
MACDEV==:56 ;Development edit number
VERSIN (MAC) ;Gerate edit number
Subttl Table of Contents
; Table of Contents for MTRMAC
;
; Section Page
;
;
; 1. Revision History . . . . . . . . . . . . . . . . . . . 5
; 2. PROGRAM-WIDE MACROS . . . . . . . . . . . . . . . . . 6
; 3. MACROS FOR LINKED LISTS . . . . . . . . . . . . . . . 8
; 4. EQUATES . . . . . . . . . . . . . . . . . . . . . . . 9
; 5. Device Status Entries
; 5.1 Explanation of device status organization . . 12
; 5.2 Format of device status file . . . . . . . . . 13
; 5.3 Format of device entry . . . . . . . . . . . . 14
; 5.4 MTA Status Block (MSB) . . . . . . . . . . . . 15
; 5.5 MSB field definitions . . . . . . . . . . . . 16
; 5.6 MT Status Block . . . . . . . . . . . . . . . 17
; 5.7 Disk Status Block (DSB) . . . . . . . . . . . 18
; 5.8 DSB Field Definitions . . . . . . . . . . . . 19
; 5.9 Structure Status Block (SSB) . . . . . . . . . 20
; 5.10 SSB Field Definitions . . . . . . . . . . . . 21
; 6. WTB - Write To Operator with reply Block . . . . . . . 22
; 7. Request Status Block
; 7.1 Tape Mount RSB . . . . . . . . . . . . . . . . 23
; 7.2 Tape Mount Field Definitions . . . . . . . . . 24
; 7.3 Structure Mount RSB . . . . . . . . . . . . . 26
; 7.4 Structure Mount Field Definitions . . . . . . 27
; 7.5 Port RSB . . . . . . . . . . . . . . . . . . . 28
; 7.6 Port Field Definitions . . . . . . . . . . . . 29
; 8. MAGTAPE ACCOUNT STATUS BLOCK
; 8.1 Description . . . . . . . . . . . . . . . . . 30
; 8.2 Field Definitions . . . . . . . . . . . . . . 31
; 9. STRUCTURE ACCOUNT STATUS BLOCK . . . . . . . . . . . . 32
; 10. ADDRESS SPACE ALLOCATION . . . . . . . . . . . . . . . 33
SUBTTL Revision History
COMMENT \
***** Release 4.2 -- Begin Maintenance Edits *****
1 4.2.1615 26-Apr-85
Define NTRY to be the number of times to get a system PID via a
MUTIL% JSYS.
***** Release 5.0 -- Begin Development edits *****
1 gco 5.1015 4-mar-83
Create MTRMAC.UNV with data and macro definitions.
2 5.1018 16-mar-83
Move command definitions back to MOUNTR.
3 4.2.1544 17-mar-83
Correct definition for bad home block in unit.
4 5.1020 29-mar-83
Add definitions for divided ipcf.
5 5.1022 7-apr-83
Add value CIPORT for demarcating the CI port on disk status displays.
6 5.1029 24-may-83
Add support for SET PORT CI command. Add Port status block.
7 5.1030 22-june-83
Add RSBSUP and RSBDSK so that the state of the port request can be
maitained while doing a port operation requested dismount.
10 5.1037 23-sept-83
Add bit definitions for exclusive.
11 5.1055 8-Nov-83
Add bit definition for REMOVE/NOREMOVE.
12 5.1054 15-Nov-83
Add a bit, R%EXC, to say we are setting a structure exclusive.
Add the displacement to the characteristic to set in the right
half of RSBMS1.
13 5.1060 28-Nov-83
Add a bit, R%REP, to RSBIFL to indicate a FORCE action to a port
operation. Set if FORCE.
14 5.1061 28-Nov-83
Define a PORT entry for the DEVICE-STATUS.BIN file.
15 5.1078 4-Feb-84
Lots of changes:
1. Eliminate second "Assembling MTRMAC.UNV" message during assembly.
2. Add table of contents
3. Define $STOP macro.
4. Add explanation of device status organization.
5. Reformat device status file entries
6. Rearrange order of description of the various types of status blocks.
7. Add pointers to the DDB in the status blocks.
8. Add a second structure status word to the SSB. STRFLG contains the
most recent results of asking the monitor the state of the structure.
STRFL1 contains additional information flags to tell if the structure
was previously mounted, previously with errors, or is currently being
dismounted.
9. Quit defining the MSTR status flags in MTRMAC. Use definitions from MONSYM.
16 5.1084 10-Feb-84
Add bit definition for DSPFLG, the display message flag word.
17 5.1088 11-Feb-84
Remove structure command table used by old MOUNTR.CMD code.
20 5.1101 20-Feb-84
Add some new bits to the "don't care" MS%NTC.
21 5.1102 20-Feb-84
Add new TMCTI macro that will accept an address to a TMCT argument
string.
22 5.1105 21-Feb-84
Increase space of the TMCT buffer, TMCMSG, from 1 to 5 pages.
23 5.1106 23-Feb-84
Add bit (STR%EP) to indicate structure has been set exclusive due to
port operation. Also, update comment on what is in RSBDSK in the port RSB.
24 5.1118 16-Mar-84
Express size of the TMCT buffer as the symbol, MSGLEN
25 5.1142 16-May-84
Define STR%UD to state that this structure is unavailable due to
dismount/remove.
26 5.1146 31-May-84
Add the third word, DSB.VE to the DDB diagram.
27 5.1150 11-Jul-84
Increase the size of RMKLEN to decimal 50 words.
30 5.1151 11-Jul-84
Define DEFPRO as the default tape protection value when initializing a
tape.
31 5.1165 3-Oct-84
Define a new MACRO, DVTGEN, to generate device table. Add new symbol
MTADVT for device type.
32 5.1181 29-Nov-84
Add word in SSB and DSB for structure unique code. Add RST.WD for
waiting for dismount.
33 5.1185 5-Dec-84
Add a new bit (MSG%FR) to print the "Free" disk drive message if there
is an online but not mounted disk drive.
34 5.1203 21-Feb-85
Add disk drive serial number to the DSB. (For use with the addition
of the SHOW CONFIGURATION DISK command.)
35 5.1206 18-Mar-85
Increase DSFPGS to two.
***** Release 5.0 -- begin maintenance edits *****
40 Increment maintenance edit level for version 5 of GALAXY.
41 5.1245 Dec-5-86
Add a new word, STRNDM, in the SSB to contain the number of dismounts
pending for this structure.
***** Release 6.0 -- begin development edits *****
50 6.1037 26-Oct-87
Move sources from G5: to G6:
51 6.1081 18-Nov-87
Define a new bit, DSF%DP for dumpable/nondumpable
52 6.1112 2-Dec-87
Add MS%OFL to MS%NTC bits
53 6.1139 14-Dec-87
Define bit R%WTO
54 6.1147 17-Dec-87
Implement automation of DISMOUNT/REMOVAL and SET EXCLUSIVE.
55 6.1207 2-Mar-88
Increase MAXDSK==250
56 6.1225 8-Mar-88
Update copyright notice.
57 6.1313 20-Feb-90
Define R%RDM in RSBIFL to reflect MF.RDM in .MSFLG. R%RDM indicates
that the remote dismount is a result of SET EXCLUSIVE or DISMOUNT REMOVAL. In
this case all WTO/WTORS/ACKS relating to this request will have a unique ACK
code sent back to NEBULA because a NACK will be sent later in correspondent to
the remote dismount command and this message must have the orginal ACK code in
the remote dismount message.
\ ;End of Revision History
SUBTTL PROGRAM-WIDE MACROS
; MACRO TO PROVIDE A VALUE 1 GREATER THAT IT DID THE LAST TIME
DEFINE NEXT <NEXT$ ;;GIVE CURRENT VALUE
NEXT$==NEXT$+1 ;;INCREMENT IT
>
; MACRO TO DEFINE OFFSETS TO FIELDS WITHIN A MEMORY BLOCK
DEFINE FLDDEF (FLDSYM,FLDLEN) <
FLDSYM==FLDPTR ;;DEFINE FIELD-OFFSET SYMBOL
FLDPTR==FLDPTR+FLDLEN ;;RESERVE ROOM FOR FIELD
>
; SAVEQ MACRO - WORKS LIKE SAVEAC <Q1,Q2,Q3>
; SAVET MACRO - WORKS LIKE SAVEAC <T1,T2,T3,T4>
; STAKT MACRO - WORKS LIKE ASUBR WITH NO ARGUMENTS, DOESN'T USE AC15
; Tn ON STACK MAY BE REFERENCED AS CTn
DEFINE SAVEQ <JSP CX,SAVEQR>
DEFINE SAVET <JSP CX,SAVETR>
DEFINE STAKT <JSP CX,STAKTR>
DEFINE CT1<-4(P)> ;CALLER'S T1
DEFINE CT2<-3(P)> ;CALLER'S T2
DEFINE CT3<-2(P)> ;CALLER'S T3
DEFINE CT4<-1(P)> ;CALLER'S T4
; ASSEMBLY-CONTROL
DEFINE PRINT1(PR1) <IF1 <PRINTX PR1>> ;PRINTX FOR PASS1 ONLY
; MACRO TO DEFINE ASSOCIATED-PROCESS TABLES
DEFINE APTABL <
APENT QSR ;;QUASAR
APENT ORN ;;ORION
>
; MACROS TO GENERATE BYTE POINTERS TO FIELDS IN LBUF2
; LPTR(ARG) - BYTE POINTER TO FIELD FOR LDB/DPB
; ILPTR(ARG) - BYTE POINTER TO FIELD FOR ILDB/IDPB
; ARGUMENT IS BYTE POSITION OF FIELD (VALUE BETWEEN 1 AND 80)
DEFINE LPTR (LCP1)
<POINT 7,LBUF2+<LCP1+4>/5-1,<LCP1-<<LCP1-1>/5*5>>*7-1>
DEFINE ILPTR (LCP1)
<POINT 7,LBUF2+<LCP1+3>/5-1,<LCP1-<<LCP1+3>/5-1>*5>*7-8>
; CONDITIONAL ASSEMBLY MACROS FOR "NOSHIP" CODE
IFNDEF SHIPSW,<SHIPSW==-1>
DEFINE NOSHIP<IFE SHIPSW>
; MACROS TO GENERATE CALLS TO ASCIZ TEXT MESSAGE COMPOSER
DEFINE TMCT (TMCTA) <
MOVEI CX,[ASCIZ\TMCTA\] ;;GET ADDRESS OF FORMATTING STRING
CALL TMCT0 ;;CALL FORMATTING ROUTINE
>
DEFINE TMCTI (ADDR) <
MOVEI CX,ADDR ;;Get address of formatting string
CALL TMCT0 ;;Call formatting routine
>
DEFINE TMCTO (TMCTA) <
CALL TMCT0 ;;CALL FORMATTING ROUTINE ONLY
>
DEFINE TMCTN (TMCTA) <
MOVEI CX,[ASCIZ\TMCTA\] ;;GET ADDRESS OF FORMATTING STRING ONLY
>
DEFINE TMCTR (TMCTA) <
JSP CX,TMCT0 ;;POINT CX AT STRING AND CALLRET TMCT0
ASCIZ\TMCTA\
>
; MACROS TO ABORT USER MOUNT REQUEST - RSB ADDRESS MUST BE IN RSB AC
DEFINE ABTREQ (ABTCOD,ABTFLG<0>) <
CALL AREQ ;;CALL ABORT ROUTINE
EXP ABTCOD+ABTFLG
>
DEFINE ABTRET (ABTCOD,ABTFLG<0>) <
CALL ARET ;;CALL ABORT-AND-RET ROUTINE
EXP ABTCOD+ABTFLG
>
ABT%OP==:1B0 ;OPERATOR RESPONSE IS PRESENT
ABT%IN==:1B1 ;ABTCOD IS ADDRESS OF LOC CONTAINING CODE
; MACRO TO EXECUTE AND TIME OUT I/O JSYS
DEFINE IOXCT (IOJSYS,IOERR,IOTIMO) <
CALL IOXCTR ;;CALL DRIVER ROUTINE
IOJSYS ;;JSYS TO BE EXECUTED
XWD IOERR,IOTIMO ;;ERROR ADDRESS, TIMEOUT ADDRESS
>
; MACRO TO CREATE AND INIT STACK AREA AND QSB AC FOR QUEUE SCAN
; ARGUMENT IS ADDRESS OF QUEUE DESCRIPTOR BLOCK (QDB)
DEFINE QSCANI (QDBADR) <
JSP CX,QSCNIR ;;CALL DRIVER
SETZ QDBADR ;;QDB ADDRESS IN IFIW FORMAT
>
; MACRO TO MARK PLACES THAT HAVE TO CHANGE IF MORE LABEL TYPES ARE ADDED
DEFINE MAXLT <IFN .LTMAX-4,<IF2 <PRINTX LABEL TYPE ADDED>>>
; Macro to cause a stop while using a reasonable message
; Note: the resulting macro generates one executable instruction so
; it can be SKIPed.
DEFINE $STOP (MESS) <
CALL STOPNW
JUMP [ASCIZ/MESS/]
>
; Macro to generate table of device types, for output show status tape-drive
DEFINE DVTGEN(TYPE),<
IRP TYPE,<
XWD [ASCIZ/ TU'TYPE/],.MTT'TYPE
>>
SUBTTL MACROS FOR LINKED LISTS
SUBTTL EQUATES
; IT IS EXPECTED THAT THE EQUATES ON THIS PAGE MAY CHANGE TO
; REFLECT CHANGES IN TOPS-20 OR IN THE REQUIREMENTS OF THIS PROGRAM
; TABLE OF VALID TOPS-20 DENSITIES INDEXED BY MONSYM DENSITY CODE
DEFINE DENLST <
0 ;;ZEROTH ENTRY UNUSED
^D200 ;;.SJDN2
^D556 ;;.SJDN5
^D800 ;;.SJDN8
^D1600 ;;.SJD16
^D6250 ;;.SJD62
>
; MISCELLANEOUS
POLINT==:^D120 ;NUMBER OF SECONDS BETWEEN MAGTAPE POLLS
MAXACC==:400 ;NUMBER OF ACCOUNTING-BLOCKS
MAXDSK==:250 ;[55]MAXIMUM # OF DISK DRIVES SUPPORTED
MAXMRQ==:400 ;MAXIMUM # OF MOUNT REQUESTS
MAXMT==:100 ;MAXIMUM # OF MT DEVICES
MAXMTA==:100 ;MAXIMUM # OF MTA DEVICES
ANSV==:"3" ;ANSI LABELING STANDARD VERSION NUMBER
DECV==:"1" ;DEC LABELING STANDARD VERSION NUMBER
PDLEN==:140 ;LENGTH OF PUSH-DOWN LIST (WORDS)
RMKLEN==:^D50 ;MAXIMUM SIZE (WORDS) OF ASCIZ MOUNT REMARK
DSFPGS==:2 ;# OF PAGES IN DEVICE-STATUS FILE
SYRMSZ==:40 ;MAX WORDS IN SYSERR MSG EXCLUDING HEADER
IFNDEF TST,<TST==:0> ;1=TEST VERSION, 0=REAL VERSION
SYRHSZ==:4 ;# OF WORDS IN SYSERR ENTRY HEADER
MOSTAL==:.MODVT+1 ;LENGTH OF .MOSTA MTOPR ARGUMENT BLOCK
NTRY==5 ;Number of times to get PID via MUTIL%
PBMAX==<WTOMAX-.OHDRS-3>*5 ;Maximum number of bytes orion can handle.
CIPORT==7 ;CI PORT NUMBER FOR KL
.PTSET==4 ;Request type for Port request block
DEFPRO==:777777 ;Default tape protection when initializing a tape
; ACCUMULATOR DEFINITIONS
F==:0 ;FLAGS
T1==:1 ;TEMPORARY
T2==:2 ;TEMPORARY
T3==:3 ;TEMPORARY
T4==:4 ;TEMPORARY
Q1==:5 ;PRESERVED
Q2==:6 ;PRESERVED
Q3==:7 ;PRESERVED
MTA==:10 ;ADDRESS OF MTA STATUS BLOCK
DSK==:10 ;ADDRESS OF DISK STATUS BLOCK
RSB==:11 ;ADDRESS OF USER REQUEST STATUS BLOCK
MT==:12 ;ADDRESS OF MT STATUS BLOCK
STR==:12 ;ADDRESS OF STRUCTURE STATUS BLOCK
QSB==:13 ;ADDRESS OF QUEUE-SCAN BLOCK
ACC==:14 ;ADDRESS OF ACCOUNT BLOCK
CX==:16 ;USED BY SUPPORT CODE
P==:17 ;PUSH-DOWN POINTER
; DEFINITIONS OF BITS IN FLAG REGISTER (F)
IRETF==:1B35 ;1 = EXTERNAL INTERRUPTS DEBRK TO SCHEDULER
MRMSF==:1B34 ;1 = DO MRECV
MRPGF==:1B33 ;1 = DO MRECV IN PAGE MODE
ABORTF==:1B32 ;1 = ABORTED REQUEST(S) EXIST IN RSB QUEUE
NOMTF==:1B31 ;1 = MT SHORTAGE EXISTS
JTOAF==:1B30 ;1 = JSYS TIMER ARMED
TALCF==:1B29 ;1 = TAPE-DRIVE ALLOCATION BY SETSPD
POLLF==:1B28 ;1 = MAGTAPE POLLING IN PROGRESS
INITF==:1B27 ;1 = IN INITIALIZATION SEQUENCE
CDENF==:1B26 ;1 = ^D INTERRUPT ENABLED (^D SCHEDULES DDT)
ARGF==:1B25 ;1 = ARGUMENT PRESENT (TMCT0 ROUTINE)
PORTF==:1B24 ;1 = PORT OPERATION IN PROCES
; PSI PRIORITY EQUATES (IN ORDER OF DESCENDING PRIORITY)
PRIPAN==:1 ;PANIC (CRASH) HANDLERS
PRIEXT==:3 ;EXTERNAL INTERRUPTS
;DEFINITIONS FOR COMND JSYS
CMKEY==:<.CMKEY>B8 ;PARSE A KEYWORD
CMNOI==:<.CMNOI>B8 ;PARSE A GUIDE WORD
CMCFM==:<.CMCFM>B8 ;CONFIRM
CMFLD==:<.CMFLD>B8 ;PARSE AN ARBITRARY FIELD
; OTHER EQUATES
DAYSEC==:^D60*^D60*^D24 ;# OF SECONDS IN A DAY (NEVER CHANGES)
DSFSZ==:DSFPGS*1000 ;# OF WORDS IN DEVICE-STATUS FILE
LBLSIZ==:^D80 ;SIZE OF TAPE LABELS IN FRAMES
LB7WDS==:<LBLSIZ+4>/5 ;LENGTH IN WORDS OF 7-BIT-BYTE LABEL
LB8WDS==:<LBLSIZ+3>/4 ;LENGTH IN WORDS OF 8-BIT-BYTE LABEL
MTNAV==:1 ;MTRSB VALUE THAT INDICATES MT NOT AVAILABLE
USRLH==:500000 ;LEFT HALF OF USER NUMBER WORD
.MNTDT==:77 ;REQUEST TYPE FOR DECTAPE-MOUNT
; OFFSETS OF LABEL FIELDS (VALUES IN THE RANGE 1-80)
V1VID==:^D5 ;VOL1 - VOLUME IDENTIFIER
V1ACS==:^D11 ;VOL1 - ACCESSIBILITY
V1SCD==:^D25 ;VOL1 - SYSTEM CODE
V1OWN==:^D38 ;VOL1 - OWNER IDENTIFIER
V1INAM==:^D41 ;VOL1 - INSTALLATION NAME (ANSI, TOPS-20)
V1INME==:^D42 ;VOL1 - INSTALLATION NAME (EBCDIC)
TPNMSZ==:^D10 ;VOL1 - LENGTH OF V1INAM AND V1INME FIELDS
V1DECV==:^D51 ;VOL1 - DEC STANDARD VERSION #
V1ANSV==:^D80 ;VOL1 - ANSI STANDARD VERSION #
V2PRO==:^D5 ;VOL2 - PROTECTION CODE
V2PPN==:^D11 ;VOL2 - PROJECT-PROGRAMMER NUMBER
V2OWN==:^D23 ;VOL2 - OWNER'S NAME
V2OWNL==:^D39 ;VOL2 - LENGTH OF OWNER'S NAME
H1SET==:^D22 ;HDR1 - FILE SET IDENTIFIER (SETNAME)
H1CRE==:^D42 ;HDR1 - CREATION DATE
H1EXP==:^D48 ;HDR1 - FILE EXPIRATION DATE
H1ACS==:^D54 ;HDR1 - ACCESSIBILITY
H2PRO==:^D38 ;HDR2 - PROTECTION CODE (TOPS-20 ONLY)
SUBTTL Device Status Entries -- Explanation of device status organization
COMMENT %
The device status information in MOUNTR for a device will normally
be composed of two specific entities. This is because some of the
information needs to be preserved across system failures. To make
things reasonably efficient, only the essential information will
be stored in this "static" Disk Data Base. There is additional
information that is stored about the status of a particular device
which is stored in the Status Block for the device. For example
consider the entries for a disk drive:
Disk
Status . . Static Disk Data Base
Block . .
. .
+------+ |------|
| |----------------------->| | Disk DDB Entry
| | | |
| |<-----------------------| |
| | |------|
+------+ . .
In this example, the disk DDB entry contains the static information
about the disk drive (available/unavailable) and the Disk Status
Block (DSB) contains the information based on the current use of the
disk drive such as the structure currently mounted on the drive etc.
The following devices have this kind of storage arrangement:
o Disk Drives
o Mag Tape Drives
o Structures
In addition, there are two special cases:
o Ports (the CI) have only a DDB since that contains all the
information that MOUNTR needs to be concerned with.
o MT devices have only status blocks since there is no information
to be preserved across system crashes.
% ;End comment
SUBTTL Device Status Entries -- Format of device status file
; DEVICE STATUS FILE
; ==================
; TOPS-20 DEVICE STATUS IS KEPT IN SYSTEM:DEVICE-STATUS.BIN. IT
; IS MAINTAINED AND EXAMINED SOLELY BY THIS PROGRAM. ITS PURPOSE IS
; TO PRESERVE SYSTEM PERIPHERAL DEVICE STATUS ACROSS RELOADS. THE
; FILE IS TREATED AS A MONOLITHIC SET OF PAGES THAT IS MAPPED IN
; ITS ENTIRETY INTO THE AREA DSBUF, WHICH HAS THIS FORMAT:
; !=====================================!
; DSB.CK ! CHECKSUM OF FILE !
; !-------------------------------------!
; DSB.PS ! APR SERIAL NUMBER !
; !-------------------------------------!
; DSB.NE ! # OF ENTRIES IN FILE (n) !
; !-------------------------------------!
; DSB.VE ! VERSION # OF FORMAT OF FILE !
; !-------------------------------------!
; DSB.EO ! !
; \ ENTRY 1 \
; ! !
; !-------------------------------------!
; ! . !
; \ . \
; ! . !
; !-------------------------------------!
; ! !
; \ ENTRY n \
; ! !
; !=====================================!
; ENTRY SIZE IS FIXED, SET BY THE EQUATE FOR DSFESZ
; ALL ENTRIES BEGIN AS FOLLOWS:
;
; WORD 0 - DEVICE TYPE CODE
; WORD 1 - DEVICE IDENTIFIER (UNIQUE WITHIN DEVICE TYPE)
; Word 2 - Flags
; Word 3 - Pointer to status block for this entry
SUBTTL Device Status Entries -- Format of device entry
DSFTYP==:0 ;Device type (if DSFSPC is -1, then this entry
; is a free entry and this field is pointer to
; next freen entry or -1 if no more free entries)
; .DVDSK ;Disk drive device -- defined in MONSYM
; .DVMTA ;Mag tape device -- defined in MONSYM
.DVSTR==:1 ;Structure device
.DVPRT==:3 ;Port device
DSFSPC==:1 ;Device specification (-1 if free entry)
; contains: tape TOPS-20 device designator
; disk drive CKU Number (Channel, Kontroller, Unit)
; structure Alias name in SIXBIT
; port Channel number (7)
DSFFLG==:2 ;Device flags
DSF%AV==:1B0 ;On if unavailable, off if available
DSF%PO==:1B1 ;On if effected by port operation, off if no effect
DSF%EX==:1B2 ;On if exclusive, off if don't care (can be shared)
; Structure only attribute
DSF%DO==:1B3 ;On if domestic, off if foreign
; Structure only attribute
DSF%IG==:1B4 ;On if ignored, off if acknowledged
; Structure only attribute
DSF%RG==:1B5 ;On if unregulated, off if regulated
; Structure only attribute
DSF%DP==:1B6 ;[51]On if dumpable, off if nondumpable
; Structure only attribute
DSFPNT==:3 ;Pointer to the status block for this entry
;-1 indicates that the device exists but there
; is no device status block. Port device currently
; has no device status block.
; 0 indicates the device does not exist
;+n indicates the address of the status block
DSFESZ==:4 ;SIZE OF DEVICE-STATUS FILE ENTRIES (WORDS)
SUBTTL Device Status Entries -- MTA Status Block (MSB)
; EACH MTA DEVICE SUPPORTED BY THE SYSTEM HAS A STATUS BLOCK THAT
; CONTAINS VARIOUS PIECES OF DEVICE-DEPENDENT INFORMATION. THE MTA
; AC CONTAINS A POINTER TO THE FIRST WORD OF THE BLOCK THAT BELONGS
; TO THE MTA DEVICE CURRENTLY BEING SERVICED.
; !=======================================================!
;MTAVOL ! VOLID OF CURRENTLY-MOUNTED VOLUME !
; !-------------------------------------------------------!
;MTASET ! SETNAME OF CURRENTLY-MOUNTED VOLUME !
; !-------------------------------------------------------!
;MTAIDV ! VOLID FROM IDENTIFY COMMAND !
; !-------------------------------------------------------!
;MTAFLG ! SINGLE-BIT FLAGS !
; !-------------------------------------------------------!
;MTAFIL ! JFN ! GTJFN COUNT !
; !-------------------------------------------------------!
;MTAP1 ! ! STATE ! LABEL TYPE ! DENSITY !
; !-------------------------------------------------------!
;MTAP2 ! MT STATUS BLOCK ADDRESS ! REWIND END-ACTION ADDRESS !
; !-------------------------------------------------------!
;MTASDN ! SUPPORTED DENSITIES ! DRIVE TYPE CODE !
; !-------------------------------------------------------!
;MTAV1 ! !
; \ IMAGE OF VOL1 LABEL ON TAPE \
; ! (ASCII OR EBCDIC, 8-BIT BYTES) !
; !-------------------------------------------------------!
;MTAV2 ! !
; \ IMAGE OF VOL2 LABEL ON TAPE \
; ! (ASCII OR EBCDIC, 8-BIT BYTES) !
; !-------------------------------------------------------!
;MTAPNT ! Pointer to MTA DDB Entry !
; !=======================================================!
SUBTTL Device Status Entries -- MSB field definitions
; Definitions of fields within MTA Status Block
FLDPTR==0
FLDDEF MTAVOL,1 ;CURRENT MTA VOLID (SIXBIT), 0 IF NONE
FLDDEF MTASET,1 ;CURRENT MTA SETNAME (SIXBIT), 0 IF NONE
FLDDEF MTAIDV,1 ;QUEUE LINKAGE WORD
FLDDEF MTAFLG,1 ;SINGLE-BIT FLAGS
MA%LOD==:1B0 ;DRIVE IS LOADED
MA%OPN==:1B1 ;JFN IS OPEN
MA%AVE==:1B2 ;AVR ENABLED
MA%AVS==:1B3 ;AVR SUPPORTED FOR THIS DRIVE
MA%WEN==:1B4 ;WRITE PERMITTED
MA%SCR==:1B5 ;VOLUME IS SCRATCH
MA%UXV==:1B6 ;UNEXPIRED LABELED VOLUME
MA%VMG==:1B7 ;VOLUME-MOUNTED MESSAGE GIVEN TO OPERATOR
MA%ULP==:1B8 ;UNLOAD DRIVE WHEN REWIND COMPLETES
MA%OPF==:1B9 ;OVERWRITE-PROTECTION FLAG, IF SET:
; ANSI - VOLUME MAY NOT BE OVERWRITTEN
; TOPS-20 - NON-OWNER MAY NOT OVERWRITE
FLDDEF MTAFIL,1 ;FILE STATUS
FLDDEF MTAP1,1 ;DEFSTR-DEFINED DATA
FLDDEF MTAP2,1 ;DEFSTR-DEFINED DATA
FLDDEF MTASDN,1 ;DEFSTR-DEFINED DATA
FLDDEF MTAV1,LB8WDS ;IMAGE OF VOL1 LABEL ON TAPE
FLDDEF MTAV2,LB8WDS ;IMAGE OF VOL2 LABEL ON TAPE
FLDDEF MTAPNT,1 ;Pointer to MTA DDB Entry
MTASZ==:FLDPTR ;SIZE OF MTA STATUS BLOCK IN WORDS
DEFSTR (MTAJFN,MTAFIL(MTA),17,18) ;JFN
DEFSTR (MTAJCT,MTAFIL(MTA),35,18) ;JFN-IN-USE COUNT
DEFSTR (MTASTE,MTAP1(MTA),17,9) ;CURRENT STATE OF DRIVE
; MTASTE/ 0 IF AND ONLY IF MTA NOT ASSIGNED TO MY JOB (VIA ASND)
S.UNAV==:0 ;UNAVAILABLE TO MOUNTR
S.AV==:1 ;AVAILABLE FOR USE BY USERS
S.INIT==:2 ;INITIALIZING TAPE VOLUMES
DEFSTR (MTALT,MTAP1(MTA),26,9) ;LABEL TYPE
DEFSTR (MTADEN,MTAP1(MTA),35,9) ;DENSITY
DEFSTR (MTAMT,MTAP2(MTA),17,18) ;MT STAT BLK ADDR OR 0 IF NONE
DEFSTR (MTAREA,MTAP2(MTA),35,18) ;REWIND END-ACTION SCHEDULE ADDR
DEFSTR (MTADRV,MTASDN(MTA),26,9) ;Drive type (1 7-track, 2 9-track)
DEFSTR (MTADVT,MTASDN(MTA),35,9) ;Device type. (.MTTxx)
SUBTTL Device Status Entries -- MT Status Block
; EACH MT DEVICE SUPPORTED BY THE SYSTEM HAS A STATUS BLOCK THAT
; CONTAINS DEVICE-RELATED INFORMATION. THE MT AC POINTS TO THE
; FIRST WORD OF THE STATUS BLOCK OF THE MT CURRENTLY BEING SERVICED.
; !=======================================================!
;MTP1 ! ADDR OF MTA STATUS BLOCK !ADDR OF REQUEST STATUS BLK !
; !=======================================================!
; DEFINITIONS OF FIELDS WITHIN MT STATUS BLOCK
FLDPTR==0
FLDDEF MTP1,1 ;DEFSTR-DEFINED DATA
MTSZ==:FLDPTR ;SIZE OF MT STATUS BLOCK
DEFSTR (MTMTA,MTP1(MT),17,18) ;MTA STATUS BLOCK ADDRESS
DEFSTR (MTRSB,MTP1(MT),35,18) ;REQUEST STATUS BLK ADDRESS
SUBTTL Device Status Entries -- Disk Status Block (DSB)
;EACH DISK ON THE SYSTEM HAS A STATUS BLOCK THAT CONTAINS INFORMATION
;ABOUT THAT DRIVE. THE DSK AC CONTAINS A POINTER TO THE FIRST WORD
;OF THE BLOCK THAT BELONGS TO THE DISK CURRENTLY BEING SERVICED.
; !=======================================================!
;DSKSTN ! SIXBIT STRUCTURE NAME !
; !-------------------------------------------------------!
;DSKSTA ! SIXBIT STRUCTURE ALIAS !
; !-------------------------------------------------------!
;DSKPNT ! Pointer to Disk DDB Entry !
; !-------------------------------------------------------!
;DSKFLG ! STATUS OF UNIT !
; !-------------------------------------------------------!
;DSKNS ! LOGICAL UNIT NUMBER ! NUMBER OF UNITS !
; !-------------------------------------------------------!
;DSKUNQ ! Structure Unique Code !
; !-------------------------------------------------------!
;DSKP2 ! STR STATUS BLOCK ADDRESS ! 0 !
; !-------------------------------------------------------!
;DSKCKU ! CKU NUMBERS (CHANNEL, CONTROLLER, AND UNIT NUMBERS) !
; !-------------------------------------------------------!
;DSKSNH ! Drive Serial Number (HIGH ORDER) !
; !-------------------------------------------------------!
;DSKSNL ! Drive Serial Number (LOW ORDER) !
; !=======================================================!
SUBTTL Device Status Entries -- DSB Field Definitions
; DEFINITIONS OF FIELDS WITHIN DISK STATUS BLOCK
FLDPTR==0
FLDDEF DSKSTN,1 ;CURRENT FILE STRUCTURE NAME(SIXBIT) - 0 IF NONE
FLDDEF DSKSTA,1 ;CURRENT FILE STRUCTURE ALIAS(SIXBIT)-0 IF NONE
FLDDEF DSKPNT,1 ;Pointer to Disk DDB Entry
FLDDEF DSKFLG,1 ;STATUS OF UNIT
;ITEMS BELOW DEFINED IN MONSYM
; MS%MNT==:1B0 ;UNIT IS PART OF A MOUNTED STRUCTURE
; MS%DIA==:1B2 ;UNIT IS BEING USED BY ON-LINE DIAGNOTIC PROGRAM
; MS%OFL==:1B3 ;UNIT IS OFF LINE
; MS%ERR==:1B4 ;UNIT HAS ERROR THAT WAS DETECTED DURING READING
; MS%BBB==:1B5 ;UNIT HAS A BAD BAT BLOCK
; ms%hbb==:1b6 ;Unit has bad home block
; MS%WLK==:1B7 ;UNIT IS WRITE-LOCKED
; MS%TYP==:777B17 ;TYPE OF DISK UNIT
; .MSRP4==:1 ;RP04
; .MSRP5==:5 ;RP05
; .MSRP6==:6 ;RP06
; .MSRP7==:7 ;RP07
FLDDEF DSKNS,1 ;LOGICAL UNIT # WITHIN STR,,# OF UNITS IN STR
FLDDEF DSKUNQ,1 ;Unique Code
FLDDEF DSKP2,1 ;STR STATUS BLOCK ADDR
FLDDEF DSKCKU,1 ;CHANNEL, CONTROLLER, AND UNIT NUMBERS
FLDDEF DSKSNH,1 ;DISK DRIVE SERIAL NUMBER (HIGH ORDER)
FLDDEF DSKSNL,1 ;DISK DRIVE SERIAL NUMBER (LOW ORDER)
DSKSZ==:FLDPTR ;SIZE OF DSK STATUS BLOCK
DEFSTR (DSKTYP,DSKFLG,17,11) ;TYPE OF DISK UNIT
DEFSTR (DSKLUN,DSKNS,17,18) ;LOGICAL UNIT NUMBER OF DISK WITHIN STR
DEFSTR (DSKNOU,DSKNS,35,18) ;NUMBER OF DISK UNITS IN STRUCTURE
DEFSTR (DSKSSA,DSKP2,17,18) ;STRUCTURE STATUS BLOCK ADDRESS
MSKSTR (DSKCHN,DSKCKU,DOP%C2) ;CHANNEL NUMBER
MSKSTR (DSKCTR,DSKCKU,DOP%K2) ;CONTROLLER NUMBER
MSKSTR (DSKDRV,DSKCKU,DOP%U2) ;DRIVE NUMBER
SUBTTL Device Status Entries -- Structure Status Block (SSB)
;EACH STRUCTURE HAS A STATUS BLOCK THAT CONTAINS INFORMATION. THE STR
;AC POINTS TO THE FIRST WORD OF THE STATUS BLOCK OF THE STRUCTURE
;CURRENTLY BEING SERVICED.
; !=======================================================!
;STRALI ! SIXBIT STRUCTURE ALIAS !
; !-------------------------------------------------------!
;STRNAM ! SIXBIT STRUCTURE NAME !
; !-------------------------------------------------------!
;STRFLG ! STRUCTURE FLAGS FROM MSTR !
; !-------------------------------------------------------!
;STRFL1 ! OTHER STRUCTURE FLAGS !
; !-------------------------------------------------------!
;STRNDM ! NUMBER OF DISMOUNTS CURRENTLY IN PROGRESS !
; !-------------------------------------------------------!
;STRCNT ! # OF UNITS ! MOUNT COUNT ! ADDR OF REQUEST STATUS BLK!
; !-------------------------------------------------------!
;STRUNQ ! Structure Unique Code !
; !-------------------------------------------------------!
;STRPNT ! POINTER TO STRUCTURE DDB !
; !-------------------------------------------------------!
;STRADD ! !
; \ ADDRESS(ES) OF DISK STATUS BLOCK(S) \
; \ (Displacement based on Disk Entry number !
; \ such as "2nd of 3 disks in structure") !
; ! !
; !=======================================================!
SUBTTL Device Status Entries -- SSB Field Definitions
; Definitions of fields in the Structure Status Block
FLDPTR==0
FLDDEF STRALI,1 ;STRUCTURE ALIAS IN SIXBIT
; (free list pointer if free entry)
FLDDEF STRNAM,1 ;STRUCTURE NAME IN SIXBIT
; (0 if free entry)
FLDDEF STRFLG,1 ;STRUCTURE STATUS
; The following bits set in this word are defined in MONSYM
; MS%PS==:1B0 ;THIS STRUCTURE IS PUBLIC
; MS%DIS==:1B1 ;STRUCTURE IS BEING DISMOUNTED
; MS%DOM==:1B2 ;STRUCTURE IS DOMESTIC ???
; MS%PPS==:1B3 ;STRUCTURE IS PRIMARY PUBLIC STRUCTURE
; MS%INI==:1B4 ;STRUCTURE IS BEING INITIALIZED
; MS%LIM==:1B5 ;STRUCTURE LIMITED TO 2050 SIZES
; MS%NRS==:1B6 ;STRUCTURE IS NOT REGULATED ???
; MS%EXC==:1B15 ;STRUCTURE IS EXCLUSIVE ???
; Bits we normally don't care about in MOUNTR
MS%NTC==:MS%PS+MS%PPS+MS%INI+MS%LIM+MS%RWS+MS%RWD+MS%ASG+MS%MXB+MS%CRY+MS%IDT+MS%IUS+MS%IDX+MS%CRD+MS%OFS ;[52]Filter out MS%OFS
;PS, initializing, or limited direct.
FLDDEF STRFL1,1 ;OTHER STRUCTURE STATUS
STR%MT==:1B0 ;Structure is mounted
STR%DT==:1B1 ;Structure is dismounted
STR%DE==:1B2 ;Structure is on a disk with errors
STR%EP==:1B3 ;Structure is exclusive due to port operation
STR%UD==:1B4 ;Structure is unavailable due to dismount
STR%LD==:1B5 ;[54]Locked for dismount
STR%LE==:1B6 ;[54]Lock for exclusive
STR%ES==:1B7 ;[54]Exclusive due to set
STR%ER==:1B8 ;[54]Exclusive due to dismount
STR%ME==:1B9 ;[54]Couldn't set exclusive after mount
STR%OB==1B10 ;[54]Dismounted on behalf of another system
STR%UM==1B11 ;[54]Unavail due to exclusive as part of mount
STR%SN==1B12 ;[54]Send dismount message to NEBULA
; Additional status bits are contained in the structure DDB
FLDDEF STRFL2,1 ;[54]Store status for DSFFLG
FLDDEF STRELC,1 ;[54]0,,set exclusive counter
FLDDEF STROBN,1 ;[54]SIXBIT node name of dismount on behalf of
FLDDEF STRSMN,1 ;[54]# of dismount messages sent to NEBULA
;**;[41]At FLDDEF STRCNT,1 add 1 line JYCW 12/5/86
FLDDEF STRNDM,1 ;[41]Number of dismounts pending
FLDDEF STRCNT,1 ;OF UNITS IN STR,,RSB ADDR
FLDDEF STRUNQ,1 ;Structure Unique Code
FLDDEF STRPNT,1 ;POINTER TO STRUCTURE DDB
FLDDEF STRADD,10 ;ADDRESSES OF DISK STRUCTURE BLOCKS
STRSZ==:FLDPTR ;SIZE OF STR STATUS BLOCK
DEFSTR (STRSEN,STRSMN,35,18) ;[54]# of dismount msg sent to NEBULA
DEFSTR (STRDLK,STRELC,35,18) ;[54]Counter for dismount locks
DEFSTR (STRUNI,STRCNT,8,9) ;NUMBER OF UNITS IN STRUCTURE
DEFSTR (STRMCT,STRCNT,17,9) ;COUNT OF UNITS MOUNTED IN STRUCTURE
DEFSTR (STRRSB,STRCNT,35,18) ;ADDRESS OF REQUEST STATUS BLOCK
SUBTTL WTB - Write To Operator with reply Block
; WHEN A ROUTINE MUST ISSUE A MESSAGE TO THE OPERATOR AND RECEIVE A
; RESPONSE, IT CALLS THE BTWTOR ROUTINE. BTWTOR SENDS A WTOR
; REQUEST TO ORION, BUILDS A WTB, AND PLACES THE WTB ON A QUEUE OF
; OUTSTANDING WTOR REQUESTS. WHEN THE OPERATOR'S RESPONSE IS
; RECEIVED FROM ORION, INWTOR DEQUEUES THE WTB AND CALLS THE
; ROUTINE SPECIFIED IN T1 OF THE BTWTOR CALL WITH:
; T1/ BYTE POINTER TO ASCIZ REPLY FROM OPERATOR
; T2/ ADDRESS OF WTB
; !=======================================================!
;WTBLNK ! WTB QUEUE LINKAGE WORD !
; !-------------------------------------------------------!
;WTBCOD ! ACKNOWLEDGMENT CODE FOR THIS MESSAGE !
; !-------------------------------------------------------!
;WTBENT ! ORIGINATOR'S ROUTINE ADDRESS (BTWTOR T1) !
; !=======================================================!
FLDPTR==0
FLDDEF WTBLNK,1 ;QUEUE LINKAGE WORD
FLDDEF WTBCOD,1 ;ORION ACKNOWLEDGMENT CODE
FLDDEF WTBENT,1 ;ORIGINATOR'S ROUTINE ADDRESS
WTBSIZ==:FLDPTR ;SIZE OF WTB
SUBTTL Request Status Block -- Tape Mount RSB
; !=======================================================!
;RSBLNK ! QUEUE LINKAGE WORD !
; !-------------------------------------------------------!
;RSBIFL ! INTERNAL FLAGS !
; !-------------------------------------------------------!
;RSBUFL ! USER-SUPPLIED FLAGS !
; !-------------------------------------------------------!
;RSBMC1 ! USER'S JOB NUMBER ! REQUEST TYPE !
; !-------------------------------------------------------!
;RSBMC2 !CURRENT STATE OR ERROR CODE! ADDR OF ACCOUNT BLOCK !
; !-------------------------------------------------------!
;RSBITN ! INTERNAL TASK NUMBER FROM QUASAR !
; !-------------------------------------------------------!
;RSBUNO ! USER'S USER NUMBER !
; !-------------------------------------------------------!
;RSBPID ! USER'S PID !
; !-------------------------------------------------------!
;RSBCOD ! USER'S ACKNOWLEDGEMENT CODE !
; !-------------------------------------------------------!
;RSBRNM ! SIXBIT MOUNT REQUEST NAME !
; !-------------------------------------------------------!
;RSBWTB ! !
; \ WRITE-TO-OPERATOR-WITH-REPLY BLOCK (WTB) \
; ! !
; !-------------------------------------------------------!
;RSBACT ! !
; \ USER'S ACCOUNT STRING \
; ! !
; !-------------------------------------------------------!
;RSBRMK ! !
; \ USER'S REMARK \
; ! !
; !-------------------------------------------------------!
;RSBSUP ! ! SUPERIOR RSB ADDR !
; !=======================================================!
;RSBSSN ! USER-SUPPLIED VOLUME SET NAME (SIXBIT) !
; !-------------------------------------------------------!
;RSBASN ! ACTUAL VOLUME SET NAME (SIXBIT) !
; !-------------------------------------------------------!
;RSBVLS ! QUEUE DESCRIPTOR BLOCK FOR VOLID LIST !
; !-------------------------------------------------------!
;RSBMT1 ! DENSITY ! DRIVE TYPE ! LABEL TYPE ! 0 !
; !-------------------------------------------------------!
;RSBMT2 ! ADDR OF MT STATUS BLOCK ! VOLUME PROTECTION CODE !
; !-------------------------------------------------------!
;RSBMT3 ! CURRENT VOLID INDEX ! 0 !
; !=======================================================!
SUBTTL Request Status Block -- Tape Mount Field Definitions
; USER TAPE MOUNT REQUESTS THAT ARE RECEIVED FROM QUASAR ARE
; TRANSFORMED UPON ARRIVAL INTO A FIXED-FORMAT REQUEST BLOCK,
; DESCRIBED BELOW. WHEN A GIVEN MOUNT REQUEST IS BEING REFERENCED,
; RSB POINTS TO THE FIRST WORD OF THE BLOCK.
FLDPTR==0
FLDDEF RSBLNK,1 ;LINKAGE TO NEXT ENTRY IN QUEUE
FLDDEF RSBIFL,1 ;INTERNAL FLAGS
R%PRIV==:1B0 ;USER IS PRIVILEGED
R%ORES==:1B1 ;OPERATOR RESPONSE PRESENT
R%WVL==:1B2 ;VOLUME LABELS SHOULD BE WRITTEN
R%ONV==:1B3 ;OPERATOR WAS NOTIFIED OF VOLID LIST
R%OPR==:1B4 ;REQUEST FROM OPR
R%DSM==:1B5 ;DISMOUNT REQUEST
R%ONR==:1B6 ;MOUNT-REQUEST MESSAGE SENT TO OPERATOR
R%PRT==:1B7 ;Port request
R%LOR==:1B8 ;[54]0=Local request 1=remote request
R%STA==:1B9 ;[54]0=success -1=fail
R%RNR==:1B10 ;Remove=1, Noremove=0
R%REP==:1B11 ;Reply bit, Force=1 Cont=0
R%EXC==:1B15 ;This is the same as MS%EXC, 1=exclusive
R%SDM==:1B16 ;[54]Send dismount message to Nebula
R%SD1==:1B17 ;[54]Send dismount msg if original RSB was canceled
R%SEX==:1B18 ;[54]0=Shared, 1=exclusive
R%LOC==:1B19 ;[54]This request has a lock
R%WTO==:1B20 ;[53]Send WTO BACK TO NEBULA.
;**;[57]At R%WTO==:1B20 add 1 line JYCW /20/90
R%RDM==:1B21 ;[57]Indirect remote dismount via SET exclusive or
;dismount with removal
FLDDEF RSBUFL,1 ;USER-DEFINED FLAGS
FLDDEF RSBMC1,1 ;MISCELLANEOUS DATA
FLDDEF RSBMC2,1 ;MISCELLANEOUS DATA
FLDDEF RSBITN,1 ;QUASAR INTERNAL TASK NUMBER
FLDDEF RSBUNO,1 ;USER'S USER NUMBER
FLDDEF RSBPID,1 ;USER'S PID
FLDDEF RSBCOD,1 ;USER'S ACKNOWLEDGMENT CODE
FLDDEF RSBRNM,1 ;MOUNT REQUEST NAME (SIXBIT)
FLDDEF RSBWTB,WTBSIZ ;WTOR BLOCK
FLDDEF RSBACT,10 ;USER'S ACCOUNT STRING (ASCIZ)
FLDDEF RSBRMK,RMKLEN ;USER'S REMARK (ASCIZ)
FLDDEF RSBSUP,1 ;RSB of superior request (for subordinate requests)
RSBCSZ==:FLDPTR ;SIZE OF AREA COMMON TO ALL RSB'S
FLDDEF RSBSSN,1 ;USER-SUPPLIED VOLUME SET NAME (SIXBIT)
FLDDEF RSBASN,1 ;ACTUAL VOLUME SET NAME (SIXBIT)
FLDDEF RSBVLS,1 ;QUEUE DESCR BLOCK FOR VOLID LIST
FLDDEF RSBMT1,1 ;MISCELLANEOUS DATA
FLDDEF RSBMT2,1 ;MISCELLANEOUS DATA
FLDDEF RSBMT3,1 ;MISCELLANEOUS DATA
MTRSBS==:FLDPTR ;SIZE OF TAPE MOUNT RSB
DEFSTR (RSBJNO,RSBMC1(RSB),17,18) ;USER'S JOB NUMBER
DEFSTR (RSBTYP,RSBMC1(RSB),35,18) ;REQUEST TYPE CODE
DEFSTR (RSBSTE,RSBMC2(RSB),17,18) ;CURRENT STATE OF REQUEST
DEFSTR (RSBACC,RSBMC2(RSB),35,18) ;ADDRESS OF ACCOUNT BLOCK
DEFSTR (RSBDEN,RSBMT1(RSB),8,9) ;DENSITY
DEFSTR (RSBDRV,RSBMT1(RSB),17,9) ;DRIVE TYPE
DEFSTR (RSBLT,RSBMT1(RSB),26,9) ;LABEL TYPE
DEFSTR (RSBMT,RSBMT2(RSB),17,18) ;MT STATUS BLOCK ADDRESS
DEFSTR (RSBVPR,RSBMT2(RSB),35,18) ;VOLUME PROTECTION CODE
DEFSTR (RSBCV,RSBMT3(RSB),17,18) ;INDEX TO CURRENT VOLID
NEXT$==:0 ;DEFINE MAGTAPE REQUEST STATES
RST.IN==:NEXT ;RSB BEING INITIALIZED
RST.WV==:NEXT ;WAITING FOR VOLID KEYIN
RST.WM==:NEXT ;WAITING FOR TAPE MOUNT
RST.AC==:NEXT ;ACTIVE (USING VOLUME)
RST.WD==:NEXT ;Waiting for dismount
;STATE CODES .GE. .ERBAS IMPLY THAT THE REQUEST IS ABORTED
ABRTNR==:.ERBAS ;ABORTED, NO RESPONSE TO USER
;DECTAPE RSB DEF'S
RSBDTA==:RSBASN ;DECTAPE DEVICE DESIGNATOR
; WHEN THE "SET TAPE-DRIVE INITIALIZE" OPR COMMAND IS USED TO
; INITIALIZE TAPES, A SPECIAL RSB WITH R%OPR SET IS ALLOCATED
; AND ATTACHED TO THE MTA VIA A FAKE MT STATUS BLOCK WITHIN
; THE RSB. SPECIAL RSB FIELDS REQUIRED FOR THIS FUNCTION WILL
; OVERLAY THE RSBACT FIELD WHICH IS IGNORED HERE.
; SPECIAL RSB FIELDS FOR OPR-REQUESTED VOLUME INITIALIZATION:
RSBICT==:RSBACT+0 ;# OF VOLUMES TO INITIALIZE
RSBIVI==:RSBACT+1 ;NUMERIC VOLID INCREMENT
RSBIVL==:RSBACT+2 ;CURRENT VOLID BEING INITIALIZED
RSBIVN==:RSBACT+3 ;INTEGER VOLID
RSBIMT==:RSBACT+4 ;FAKE MT STATUS BLOCK
SUBTTL Request Status Block -- Structure Mount RSB
; !=======================================================!
;RSBLNK ! QUEUE LINKAGE WORD !
; !-------------------------------------------------------!
;RSBIFL ! INTERNAL FLAGS !
; !-------------------------------------------------------!
;RSBUFL ! USER-SUPPLIED FLAGS !
; !-------------------------------------------------------!
;RSBMC1 ! USER'S JOB NUMBER ! REQUEST TYPE !
; !-------------------------------------------------------!
;RSBMC2 !CURRENT STATE OR ERROR CODE! ADDR OF ACCOUNT BLOCK !
; !-------------------------------------------------------!
;RSBITN ! INTERNAL TASK NUMBER FROM QUASAR !
; !-------------------------------------------------------!
;RSBUNO ! USER'S USER NUMBER !
; !-------------------------------------------------------!
;RSBPID ! USER'S PID !
; !-------------------------------------------------------!
;RSBCOD ! USER'S ACKNOWLEDGEMENT CODE !
; !-------------------------------------------------------!
;RSBRNM ! SIXBIT MOUNT REQUEST NAME !
; !-------------------------------------------------------!
;RSBWTB ! !
; \ WRITE-TO-OPERATOR-WITH-REPLY BLOCK (WTB) \
; ! !
; !-------------------------------------------------------!
;RSBACT ! !
; \ USER'S ACCOUNT STRING \
; ! !
; !-------------------------------------------------------!
;RSBRMK ! !
; \ USER'S REMARK \
; ! !
; !=======================================================!
;RSBSTN ! STRUCTURE NAME (SIXBIT) !
; !-------------------------------------------------------!
;RSBSTA ! STRUCTURE ALIAS (SIXBIT) !
; !-------------------------------------------------------!
;RSBMS1 ! ADDR OF STR STATUS BLOCK ! 0 !
; !-------------------------------------------------------!
;RSBOBN ! SIXBIT NODE NAME OF ON BEHALF DISMOUNT !
; !-------------------------------------------------------!
;RSBCON ! ADDRESS TO CONTINUE PROCESSING ONCE AN ACK IS RECEIVED!
; !-------------------------------------------------------!
;RSBFAI ! ADDRESS TO CONTINUE PROCESSING ON ABORT RESPONSE !
; !-------------------------------------------------------!
;RSBRAC ! REMOTE DISMOUNT ACK CODE !
; !-------------------------------------------------------!
;RSBERR ! ERROR TYPE ! ERROR CODE !
; !-------------------------------------------------------!
;RSBNNM ! OTHER NODES IN CLUSTER! NODES THAT HAVE STR MOUNTED !
; !-------------------------------------------------------!
;RSBRND ! Nodes which have the structure mounted !
; !=======================================================!
SUBTTL Request Status Block -- Structure Mount Field Definitions
FLDPTR==:RSBCSZ ;SET POINTER TO END OF COMMON SECTION
FLDDEF RSBSTN,1 ;STRUCTURE NAME (SIXBIT)
FLDDEF RSBSTA,1 ;STRUCTURE ALIAS (SIXBIT)
FLDDEF RSBMS1,1 ;MISCELLANEOUS DATA
FLDDEF RSBOBN,1 ;[54]SIXBIT node name
FLDDEF RSBCON,1 ;[54]Continue address for remote dismount
FLDDEF RSBABO,1 ;[54]Continue address for abort response
FLDDEF RSBRAC,1 ;[54]Remote dismount ACK code
FLDDEF RSBERR,1 ;[54]Error type,,error code
FLDDEF RSBNNM,1 ;[54]number of nodes in cluster
FLDDEF RSBRND,16 ;[54]SIXBIT node names in cluster and status
STRSBS==:FLDPTR ;SIZE OF STRUCTURE-MOUNT RSB
DEFSTR (RSBSS,RSBMS1(RSB),17,18) ;STR STATUS BLOCK ADDR
DEFSTR (RSBEX,RSBMS1(RSB),35,18) ;OFFSET TO THE CHARACTERISTIC
DEFSTR (RSBERT,RSBERR(RSB),17,18) ;[54]ERROR TYPE
DEFSTR (RSBEC,RSBERR(RSB),35,18) ;[54]ERROR CODE
DEFSTR (RSBNO1,RSBNNM(RSB),17,18) ;[54]Number of nodes in the cluster
DEFSTR (RSBNSM,RSBNNM(RSB),35,18) ;[54]Number of nodes in the cluster that
;[54]have the structure mounted
; SET RSBSIZ = MAX(MTRSBS,STRSBS)
RSBSIZ==:MTRSBS
IFG STRSBS-MTRSBS,<RSBSIZ==:STRSBS>
SUBTTL Request Status Block -- Port RSB
; !=======================================================!
;RSBLNK ! QUEUE LINKAGE WORD !
; !-------------------------------------------------------!
;RSBIFL ! INTERNAL FLAGS !
; !-------------------------------------------------------!
;RSBUFL ! USER-SUPPLIED FLAGS !
; !-------------------------------------------------------!
;RSBMC1 ! USER'S JOB NUMBER ! REQUEST TYPE !
; !-------------------------------------------------------!
;RSBMC2 !CURRENT STATE OR ERROR CODE! ADDR OF ACCOUNT BLOCK !
; !-------------------------------------------------------!
;RSBITN ! INTERNAL TASK NUMBER FROM QUASAR !
; !-------------------------------------------------------!
;RSBUNO ! USER'S USER NUMBER !
; !-------------------------------------------------------!
;RSBPID ! USER'S PID !
; !-------------------------------------------------------!
;RSBCOD ! USER'S ACKNOWLEDGEMENT CODE !
; !-------------------------------------------------------!
;RSBRNM ! SIXBIT MOUNT REQUEST NAME !
; !-------------------------------------------------------!
;RSBWTB ! !
; \ WRITE-TO-OPERATOR-WITH-REPLY BLOCK (WTB) \
; ! !
; !-------------------------------------------------------!
;RSBACT ! !
; \ USER'S ACCOUNT STRING \
; ! !
; !-------------------------------------------------------!
;RSBRMK ! !
; \ USER'S REMARK \
; ! !
; !=======================================================!
;RSBPRT ! FLAGS | CHANNEL # !
; !-------------------------------------------------------!
;RSBDSK ! DDB Pointer | DSK POINTER !
; !=======================================================!
SUBTTL Request Status Block -- Port Field Definitions
FLDPTR==:RSBCSZ ;SET POINTER TO END OF COMMON SECTION
FLDDEF RSBPRT,1 ;Flags,,Channel #
FLDDEF RSBDSK,1 ;Loop counter,,disk being processed
PRTSBS==:FLDPTR ;SIZE OF STRUCTURE-MOUNT RSB
DEFSTR (RSBPF,RSBPRT(RSB),17,18) ;Port request flags
DEFSTR (RSBCH,RSBPRT(RSB),35,36) ;Channel requested
NEXT$==:0 ;Define port request states
PRT.IN==:NEXT ;RSB being initialized
PRT.WT==:NEXT ;Waiting for operator response
PRT.DS==:NEXT ;Dismounting
PRT.FC==:NEXT ;Dismounting by force
PRT.MT==:NEXT ;Mounting disks
PRT.AB==:NEXT ;Abort request
; SET RSBSIZ = MAX(MTRSBS,STRSBS,RSBPRT)
RSBSIZ==:MTRSBS
IFG STRSBS-MTRSBS,<RSBSIZ==:STRSBS>
SUBTTL MAGTAPE ACCOUNT STATUS BLOCK -- Description
;EACH TAPE DISMOUNT CAUSES AN ACCOUNT RECORD TO BE PUT INTO THE SYSTEM
;USAGE FILE. THE ACCOUNT STATUS BLOCK IS MADE WHEN A TAPE IS MOUNTED.
; !=======================================================!
;ACCLNK ! QUEUE LINKAGE !
; !-------------------------------------------------------!
;ACCDD ! DEVICE DESIGNATOR !
; !-------------------------------------------------------!
;ACCNO ! JOB NUMBER ! LINE NUMBER !
; !-------------------------------------------------------!
;ACCUSR ! !
; \ USER NAME \
; ! !
; !-------------------------------------------------------!
;ACCSTG ! !
; \ USER'S ACCOUNT STRING \
; ! !
; !-------------------------------------------------------!
;ACCCRT ! DATE/TIME OF REQUEST CREATION !
; !-------------------------------------------------------!
;ACCSCD ! DATE/TIME WHEN SCHEDULED !
; !-------------------------------------------------------!
;ACCSVT ! DATE/TIME WHEN SERVICED !
; !-------------------------------------------------------!
;ACCEUT ! ELAPSED TIME OF USE !
; !-------------------------------------------------------!
;ACCDSP ! DISPOSITION !
; !-------------------------------------------------------!
;ACCVID ! VOLUME IDENTIFIER !
; ! !
; !-------------------------------------------------------!
;ACCMC1 !CONTROLLER! LABEL! LABEL ! 0 !
; !-------------------------------------------------------!
;ACCPR ! RECORDS READ !
; !-------------------------------------------------------!
;ACCPW ! RECORDS WRITTEN !
; !-------------------------------------------------------!
;ACCFR ! FRAMES READ / 1000. !
; !-------------------------------------------------------!
;ACCFW ! FRAMES WRITTEN / 1000. !
; !-------------------------------------------------------!
;ACCSR ! NUMBER OF SOFT READ ERRORS !
; !-------------------------------------------------------!
;ACCSW ! NUMBER OF SOFT WRITE ERRORS !
; !-------------------------------------------------------!
;ACCHR ! NUMBER OF HARD READ ERRORS !
; !-------------------------------------------------------!
;ACCHW ! NUMBER OF HARD WRITE ERRORS !
; !-------------------------------------------------------!
;ACCFSI ! FILE SET IDENTIFIER !
; !=======================================================!
SUBTTL MAGTAPE ACCOUNT STATUS BLOCK -- Field Definitions
FLDPTR==0
FLDDEF ACCLNK,1 ;LINKAGE TO NEXT ENTRY IN QUEUE
FLDDEF ACCDD,1 ;DEVICE DESIGNATOR AS DEFINED BY SYSTEM
FLDDEF ACCNO,1 ;USER JOB NUMBER,,USER LINE NUMBER
FLDDEF ACCUSR,10 ;ASCIZ USER NAME
FLDDEF ACCSTG,10 ;USER ACCOUNT STRING
FLDDEF ACCCRT,1 ;DATE AND TIME OF REQUEST CREATION
FLDDEF ACCSCD,1 ;DATE AND TIME REQUEST SERVICED
FLDDEF ACCSVT,1 ;DATE AND TIME WHEN REQUEST SERVICED
FLDDEF ACCEUT,1 ;ELAPSED TIME OF USE
FLDDEF ACCDSP,1 ; DISPOSITION OF REQUEST
ACCCSZ==:FLDPTR ;SIZE OF AREA COMMON TO ALL ACC BLOCKS
FLDDEF ACCVID,2 ;VOLUME IDENTIFIER
FLDDEF ACCMC1,1 ;CONTROLLER TYPE,LABEL TYPE,LABEL STATE
FLDDEF ACCPR,1 ;NUMBER OF PHYSICAL RECORDS READ
FLDDEF ACCPW,1 ;NUMBER OF PHYSICAL RECORDS WRITTEN
FLDDEF ACCFR,1 ;NUMBER OF FRAMES READ/1000.
FLDDEF ACCFW,1 ;NUMBER OF FRAMES WRITTEN/1000.
FLDDEF ACCSR,1 ;NUMBER OF SOFT READ ERRORS
FLDDEF ACCSW,1 ;NUMBER OF SOFT WRITE ERRORS
FLDDEF ACCHR,1 ;NUMBER OF HARD READ ERRORS
FLDDEF ACCHW,1 ;NUMBER OF HARD WRITE ERRORS
FLDDEF ACCFSI,1 ;FILE SET IDENTIFIER (ASCIZ)
ACCSIZ==:FLDPTR ;SIZE OF MAGTAPE ACCOUNT BLOCK
DEFSTR (ACCJN,ACCNO(ACC),17,18) ;USER'S JOB NUMBER
DEFSTR (ACCLN,ACCNO(ACC),35,18) ;USER'S LINE NUMBER
DEFSTR (ACCKT,ACCMC1(ACC),5,6) ;CONTROLLER TYPE
DEFSTR (ACCLT,ACCMC1(ACC),11,6) ;LABEL TYPE
DEFSTR (ACCLS,ACCMC1(ACC),17,6) ;VOLUME LABEL STATE
SUBTTL STRUCTURE ACCOUNT STATUS BLOCK
;EACH STRUCTURE DECREMENT CAUSES AN ACCOUNT RECORD TO BE PUT INTO THE
;SYSTEM USAGE FILE. THE ACCOUNT STATUS BLOCK IS MADE WHEN A STRUCURE
;IS INCREMENTED.
; !=======================================================!
;ACCLNK ! QUEUE LINKAGE !
; !-------------------------------------------------------!
;ACCDD ! DEVICE DESIGNATOR !
; !-------------------------------------------------------!
;ACCNO ! JOB NUMBER ! LINE NUMBER !
; !-------------------------------------------------------!
;ACCUSR ! !
; \ USER NAME \
; ! !
; !-------------------------------------------------------!
;ACCSTG ! !
; \ USER'S ACCOUNT STRING \
; ! !
; !-------------------------------------------------------!
;ACCCRT ! DATE/TIME OF REQUEST CREATION !
; !-------------------------------------------------------!
;ACCSCD ! DATE/TIME WHEN SCHEDULED !
; !-------------------------------------------------------!
;ACCSVT ! DATE/TIME WHEN SERVICED !
; !-------------------------------------------------------!
;ACCEUT ! ELAPSED TIME OF USE !
; !-------------------------------------------------------!
;ACCDSP ! DISPOSITION !
; !-------------------------------------------------------!
;ACCSTN ! STRUCTURE NAME !
; !-------------------------------------------------------!
;ACCMCT ! MOUNT COUNT BEFORE ! MOUNT COUNT AFTER !
; !-------------------------------------------------------!
;ACCMC2 !CONTROLLER! DEVICE! STR ! NUMBER OF UNITS !
; !-------------------------------------------------------!
;ACCFRK ! NUMBER OF JOB FORKS INCREMENTING MOUNT COUNT !
; !=======================================================!
FLDPTR==:ACCCSZ ;SET POINTER TO END OF COMMON SECTION
FLDDEF ACCSTN,1 ;ASCIZ STRUCTURE PHYSICAL ID
FLDDEF ACCMCT,1 ;MOUNT COUNT BEFORE,,MOUNT COUNT AFTER
FLDDEF ACCMC2,1 ;CONTROLLER,DEVICE,STR TYPE,# OF UNITS
FLDDEF ACCFRK,1 ;NUMBER OF JOB FORKS INCREMENTING COUNT
DEFSTR (ACCDT,ACCMC2(ACC),11,6) ;DEVICE TYPE
DEFSTR (ACCST,ACCMC2(ACC),17,6) ;STRUCTURE TYPE
DEFSTR (ACCNU,ACCMC2(ACC),35,18) ;NUMBER OF UNITS IN STRUCTURE
DEFSTR (ACCMB,ACCMCT(ACC),17,18) ;MOUNT COUNT BEFORE MOUNTING STR
DEFSTR (ACCMA,ACCMCT(ACC),35,18) ;MOUNT COUNT AFTER DISMOUNTING STR
SUBTTL ADDRESS SPACE ALLOCATION
; MACRO TO ASSIGN LARGE REGIONS OF ADDRESS SPACE
DEFINE ADASN (ADSYM,ADSIZ,ADPAG) <
IFNB <ADPAG>,<ADPTR==<<ADPTR+777>&777000>> ;;PAGE BOUNDARY
ADSYM=ADPTR ;;DEFINE START OF REGION
ADPTR==ADPTR+ADSIZ ;;INCREMENT ALLOCATION POINTER
>
ADLOW==:53000 ;START ASSIGNING SPACE AT THIS ADDRESS
ADPTR==:ADLOW ;INITIALIZE CURRENT ASSIGNMENT LOCATION
; ASSIGNMENT OF ADDRESS SPACE
ADASN RBUF,1000,PAGE ;BUFFER FOR RECEIVING IPCF MESSAGES
ADASN TBUF,1000,PAGE ;MSEND MESSAGES BUILT HERE
ADASN BADMSG,1000,PAGE ;BAD GALAXY IPCF MESSAGES SAVED HERE
ADASN DSBUF,DSFSZ,PAGE ;DEVICE-STATUS FILE BUFFER PAGE
;NOTE - LBUF1W MUST BE .GE. MAXPPB*1000 (MAXPPB IS DEFINED IN STG)
LBUF1W==:30000
ADASN LBUF1,LBUF1W,PAGE ;DUMPI/DUMPO LABEL BUFFER
ADASN SRQ,^D100*3 ;SCHEDULER REQUEST QUEUE
MSGLEN==:5000 ;Length of the TMCMSG buffer
ADASN TMCMSG,MSGLEN ;TEXT MESSAGE COMPOSITION AREA
ATMSIZ==:100
ADASN ATMBFR,ATMSIZ ;ATOM BUFFER FOR COMND JSYS
ADASN MTA0,MTASZ*MAXMTA ;MTA STATUS BLOCKS
ADASN MT0,MTSZ*MAXMT ;MT STATUS BLOCKS
ADASN RSB0,<<MAXMRQ+1>*RSBSIZ> ;RSB POOL
ADASN DSKSTB,DSKSZ*MAXDSK ;DSK STATUS BLOCKS
ADASN STRSTB,STRSZ*MAXDSK ;STR STATUS BLOCKS
MAXSSB==:STRSZ*MAXDSK+STRSTB ;Max ssb entry address
VOLPN==:<MAXMRQ+1>*5 ;AVERAGE 5 VOLIDS PER TAPE REQUEST
ADASN VOLP0,VOLPN*2 ;VOLID STORAGE POOL
IGNLEN==:20
ADASN IGNTBL,IGNLEN ;STRUCTURE NAMES TO BE IGNORED
ADASN ACC0,<<MAXACC+1>*ACCSIZ> ;ACCOUNT BLOCK POOL
IFG ADPTR-700000,<PRINT1 <ADDRESS SPACE OVERFLOW>>
; DEVICE STATUS BUFFER EQUATES
DSB.CK==:DSBUF ;CHECKSUM WORD
DSB.PS==:DSBUF+1 ;APR SERIAL NUMBER
DSB.NE==:DSBUF+2 ;# OF ENTRIES IN DEVICE-STATUS FILE
DSB.VE==:DSBUF+3 ;Version number of format of file
DSBVER==:10 ;Current version number
DSB.EO==:DSBUF+4 ;ORIGIN OF ENTRY LIST IN BUFFER
; Display message type
MSG%CI==:1B0 ;Channel 7 message
MSG%CO==:1B1 ;Conflicting bits in STRFLG message
MSG%AN==:1B3 ;There is at least one disk to print
MSG%DU==:1B4 ;Dual ported message
MSG%FR==:1B5 ;Free drive doesn't mean can be removed
; DEFINITIONS TO BE DELETED ONCE THEY ARE DEFINED BY THE MONITOR GROUP
E%NEB==:1
.NRDAK==:300006
.DSEXC==:6
stlow==:0
sthigh==:20
END