Trailing-Edge
-
PDP-10 Archives
-
bb-lw55a-bm
-
language-sources/getput.bli
There are 21 other files named getput.bli in the archive. Click here to see a list.
MODULE GETPUT ( ! GET, PUT, and CONNECT service
IDENT = '7'
%BLISS36(,ENTRY(
R$GET,
R$PUT,
R$CONNECT,
DAP$GET,
DAP$PUT
))
) =
BEGIN
! COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1981, 1986.
! ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND
! COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH
! THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR
! ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE
! AVAILABLE TO ANY OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE
! SOFTWARE IS HEREBY TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT
! NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL
! EQUIPMENT CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF
! ITS SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!++
! FACILITY: DAP
!
! ABSTRACT: Routines to transfer records or blocks of file data.
!
!
! ENVIRONMENT: RMS, BLISSNET, XPORT, Transportable code.
!
! AUTHOR: Andrew Nourse, CREATION DATE: 3-Jan-82
!
! 07 - Eat residue of message if data-overrun
! 06 - improve record size checking
! 05 - Adjust message size to account for byte size
! 04 - Put in ENTRY points
! 03 - Don't reinit descriptor after setting it up for ASCII
! 02 - Workaround RMS-20/FAL-20 habit of leaving CRLFs on records
! 01 - The beginning
!--
!
! INCLUDE FILES:
!
!LIBRARY 'BLI:XPORT';
LIBRARY 'RMS';
LIBRARY 'BLISSNET';
LIBRARY 'CONDIT';
LIBRARY 'DAP';
!
! TABLE OF CONTENTS:
!
FORWARD ROUTINE
R$GET,
R$PUT,
R$CONNECT,
DAP$GET,
DAP$PUT,
DAP$CONNECT;
!
! MACROS:
!
MACRO BREAK_CHARACTERS= %O'12' TO %O'14', %O'20' TO %O'24', %O'32', %O'33' %;
! <ESC><^Z><DC1-4><DLE><FF><VT> and <LF>
MACRO ROTC(LOW_AC,BITS)=MACHOP(%O'245',LOW_AC,BITS) %;
! Rotate-combined (LOW_AC is the lower of 2 contiguous accumulators)
!
! EQUATED SYMBOLS:
!
LITERAL $CHCRT=%O'15', ! Carriage return
$CHLFD=%O'12'; ! Linefeed
LITERAL LOAC=6, ! Ac's to user for
HIAC=7; ! ROTC
!
! OWN STORAGE:
!
OWN T_CRLF: INITIAL (%ASCII %STRING(%CHAR(13),%CHAR(10))),
D_CRLF: $STR_DESCRIPTOR(STRING=(2,CH$PTR(T_CRLF)));
!
! EXTERNAL REFERENCES:
!
EXTERNAL ROUTINE
DAP$GET_BYTE,
DAP$PUT_BYTE,
DAP$GET_MESSAGE,
DAP$PUT_MESSAGE,
DAP$GET_STRING,
DAP$GET_STATUS,
DAP$PUT_STRING,
DAP$PUT_CONTROL,
DAP$GET_ACK,
DAP$ERROR_DAP_RMS,
DAP$EAT_MESSAGE,
RL$GMACY11,
RL$PMACY11,
RL$CMACY11,
DAP$HANDLE; ! Condition handler
GLOBAL ROUTINE R$GET (RAB,ERR) = ! Get a record
!++
! FUNCTIONAL DESCRIPTION:
!
! Get a record from an open file.
! Use RMS if file is local, DAP (via DAP$GET) if remote.
!
! FORMAL PARAMETERS:
!
! RAB: A RAB as defined by RMS
! ERR: Address of error routine
!
! IMPLICIT INPUTS:
!
! NONE
!
! IMPLICIT OUTPUTS:
!
! NONE
!
! ROUTINE VALUE:
! COMPLETION CODES:
!
! NONE
!
! SIDE EFFECTS:
!
! NONE
!
!--
BEGIN
MAP RAB: REF $RAB_DECL;
BIND FAB=.RAB[RAB$A_FAB]: $FAB_DECL;
LOCAL V;
V=(IF .FAB[FAB$V_REMOTE]
THEN DAP$GET(RAB[$],.ERR)
ELSE
BEGIN
BIND TYP=.FAB[FAB$A_TYP]: $TYP_DECL;
LOCAL CLASS;
IF TYP NEQ 0 THEN CLASS=.TYP[TYP$H_CLASS]
ELSE CLASS=TYP$K_CLASS_ASCII;
CASE .TYP[TYP$H_CLASS] FROM 0 TO TYP$K_CLASS_MAX OF
SET
[TYP$K_CLASS_ASCII,
TYP$K_CLASS_IMAGE]: $GET(RAB=RAB[$],ERR=.ERR);
[TYP$K_CLASS_MACY11]: RL$GMACY11(RAB[$],.ERR);
[INRANGE, OUTRANGE]: SIGNAL(DAP$_AOR);
TES
END);
%(
IF (.FAB[FAB$Z_RFM] EQL FAB$K_RFM_STM) AND (.RAB[RAB$H_RSZ] GEQ 2)
THEN
BEGIN
LOCAL PT; ! Character pointer
PT=CH$PTR(.RAB[RAB$A_RBF],.RAB[RAB$H_RSZ]-2);
IF CH$RCHAR_A(PT) EQL $CHCRT
THEN (IF CH$RCHAR_A(PT) EQL $CHLFD
THEN RAB[RAB$H_RSZ]=.RAB[RAB$H_RSZ]-2);
END
)%
.V
END; !End of R$GET
GLOBAL ROUTINE R$PUT (RAB,ERR) = ! Put a record
!++
! FUNCTIONAL DESCRIPTION:
!
! Put a record to an open file.
! Use RMS if file is local, DAP (via DAP$PUT) if remote.
!
! FORMAL PARAMETERS:
!
! RAB: A RAB as defined by RMS
! ERR: Address of error routine
!
! COMPLETION CODES:
!
! Standard RMS codes
!
! SIDE EFFECTS:
!
! NONE
!--
BEGIN
MAP RAB: REF $RAB_DECL;
BIND FAB=.RAB[RAB$A_FAB]: $FAB_DECL;
IF .FAB[FAB$V_REMOTE]
THEN DAP$PUT(RAB[$],.ERR)
ELSE
BEGIN
IF (.FAB[FAB$Z_RFM] EQL FAB$K_RFM_STM)
THEN
BEGIN ! Make sure any stream record
LOCAL PTR; ! is terminated
PTR=CH$PTR(.RAB[RAB$A_RBF],.RAB[RAB$H_RSZ]-1);
SELECT CH$RCHAR_A(PTR) OF
SET !Break characters: <ESC><^Z><DC1-4><DLE><FF><VT> and <LF>
[BREAK_CHARACTERS]: ; ! Leave it alone
[OTHERWISE]:
BEGIN
IF (.RAB[RAB$A_RBF] NEQ .RAB[RAB$A_UBF])
THEN ! He just pointed to the record
BEGIN ! so we will have to copy it
$STR_COPY(STRING=(.RAB[RAB$H_RSZ],
CH$PTR(.RAB[RAB$A_RBF])),
TARGET=(.RAB[RAB$H_RSZ],
CH$PTR(.RAB[RAB$A_UBF])));
RAB[RAB$A_RBF]=.RAB[RAB$A_UBF];
PTR=CH$PTR(.RAB[RAB$A_RBF],.RAB[RAB$H_RSZ]);
END;
CH$WCHAR_A($CHCRT,PTR); ! Add a CR
CH$WCHAR_A($CHLFD,PTR); ! and a LF
RAB[RAB$H_RSZ]=.RAB[RAB$H_RSZ]+2; ! and count them both
END;
TES;
END;
BEGIN
BIND TYP=.FAB[FAB$A_TYP]: $TYP_DECL;
LOCAL CLASS;
IF TYP NEQ 0 THEN CLASS=.TYP[TYP$H_CLASS]
ELSE CLASS=TYP$K_CLASS_ASCII;
CASE .CLASS FROM 0 TO TYP$K_CLASS_MAX OF
SET
[TYP$K_CLASS_ASCII,
TYP$K_CLASS_IMAGE]: $PUT(RAB=RAB[$],ERR=.ERR);
[TYP$K_CLASS_MACY11]: RL$PMACY11(RAB[$],.ERR);
[INRANGE, OUTRANGE]: SIGNAL(DAP$_AOR);
TES;
END;
END;
.RAB[RAB$H_STS] ! Return status
END; !End of PUT
GLOBAL ROUTINE R$CONNECT (RAB,ERR) = ! Connect RAB to FAB
!++
! FUNCTIONAL DESCRIPTION:
!
! Connect FAB to RAB
! Use RMS if file is local, DAP (via DAP$CONNECT) if remote.
!
! FORMAL PARAMETERS:
!
! RAB: A RAB as defined by RMS
! ERR: Address of error routine
!
! IMPLICIT INPUTS:
!
! NONE
!
! IMPLICIT OUTPUTS:
!
! RAB[RAB$Z_RAC] set to SEQ if (BFT or TRA) and local
!
! ROUTINE VALUE:
! COMPLETION CODES:
!
! NONE
!
! SIDE EFFECTS:
!
! NONE
!
!--
BEGIN
MAP RAB: REF $RAB_DECL;
BIND FAB=.RAB[RAB$A_FAB]: $FAB_DECL; ! FAB for this RAB
BIND TYP=.FAB[FAB$A_TYP]: $TYP_DECL; ! Data type block
LOCAL STATUS;
LOCAL RAC;
IF ((RAC=.RAB[RAB$Z_RAC]) EQL RAB$K_RAC_BFT)
THEN RAB[RAB$Z_RAC]=RAB$K_RAC_TRA; ! RMS & most FALs
! won't accept BFT or TRA on $CONNECT
IF .FAB[FAB$V_REMOTE]
THEN STATUS=DAP$CONNECT(RAB[$],.ERR)
ELSE
BEGIN
IF .RAB[RAB$Z_RAC] EQL RAB$K_RAC_TRA
THEN RAB[RAB$Z_RAC]=RAB$K_RAC_SEQ; ! RMS won't like TRA either
IF .RAC EQL RAB$K_RAC_TRA
THEN RAC=RAB$K_RAC_SEQ; ! Change permanently if TRA
IF (TYP NEQ 0)
AND (.TYP[TYP$H_CLASS] EQL TYP$K_CLASS_MACY11)
THEN STATUS=RL$CMACY11(RAB[$],.ERR) ! MACY11 has some special setup
ELSE STATUS=$CONNECT(RAB=RAB[$],ERR=.ERR);
END;
RAB[RAB$Z_RAC]=.RAC; ! Restore RAC field after hiding from RMS/FAL
RAB[RAB$A_RBF]=.RAB[RAB$A_UBF]; ! Init pointer to user buffer
.STATUS
END; !End of CONNECT
GLOBAL ROUTINE DAP$GET (RAB,ERR) = ! Get a record (remote)
!++
! FUNCTIONAL DESCRIPTION:
!
! Get a record from an open file on another system
!
! FORMAL PARAMETERS:
!
! RAB: A RAB as defined by RMS
! ERR: Address of error routine
!
! COMPLETION CODES:
!
! NONE
!
! SIDE EFFECTS:
!
! NONE
!
!--
BEGIN
MAP RAB: REF $RAB_DECL;
BIND FAB=.RAB[RAB$A_FAB]: $FAB_DECL;
BIND DIB=.FAB[FAB$A_DIB]: $DIB;
BIND IDD=.DIB[DIB$A_I_DD]: $DAP_DESCRIPTOR,
ODD=.DIB[DIB$A_O_DD]: $DAP_DESCRIPTOR;
BIND TYP=.FAB[FAB$A_TYP]: $TYP_DECL;
BIND ROUTINE $$ERRRTN=.ERR: RMS_ERCAL;
LOCAL CLASS;
LOCAL ADATA: $STR_DESCRIPTOR(),
BDATA: $XPO_DESCRIPTOR();
LOCAL DISPLAY: BITVECTOR[28];
LOCAL RABSAV: VOLATILE;
LOCAL ERRSAV: VOLATILE;
ENABLE DAP$HANDLE(RABSAV,ERRSAV);
ERRSAV=.ERR;
RABSAV=.RAB; ! Handler will need this
CLEARV(DISPLAY);
IF TYP NEQ 0 THEN CLASS=.TYP[TYP$H_CLASS]
ELSE CLASS=TYP$K_CLASS_ASCII;
DO BEGIN
IF .DIB[DIB$V_NO_SEND_CONTROL] EQL 0 ! Send control on first GET only
THEN ! if file transfer mode,
BEGIN ! otherwise, on every GET
DAP$PUT_CONTROL(ODD[$],RAB[$],DAP$K_GET,DISPLAY);
DAP$PUT_MESSAGE(ODD[$]);
DIB[DIB$V_NO_SEND_CONTROL]=1; !? File transfer mode only
END;
SELECT GET_HEADER(IDD[$]) OF
SET
[DAP$K_DATA]: BEGIN ! Process data from remote
RAB[RAB$G_RFA]=GET_VBN(IDD[$]);
RAB[RAB$A_RBF]=.RAB[RAB$A_UBF]; ! Use user's buffer
CASE .CLASS FROM 0 TO TYP$K_CLASS_MAX OF
SET
[TYP$K_CLASS_ASCII]:
BEGIN ! 7bit Ascii File
IF .IDD[DAP$H_LENGTH] GTR (.RAB[RAB$H_USZ]*5)
THEN ![6] record too big
BEGIN
DAP$EAT_MESSAGE(IDD[$]); ![7]
RAB[RAB$H_STS]=RMS$_RTB;
$$ERROR(GET,RAB[$]);
RETURN RMS$_RTB;
END;
RAB[RAB$H_RSZ]=.IDD[DAP$H_LENGTH]; ! Record length
$STR_DESC_INIT(DESCRIPTOR=ADATA,
STRING=(.RAB[RAB$H_USZ]*5,
CH$PTR(.RAB[RAB$A_UBF])));
DAP$GET_STRING(IDD[$],ADATA);
END;
[TYP$K_CLASS_IMAGE]:
BEGIN ! Binary file
REGISTER A=LOAC;
REGISTER B=HIAC;
LOCAL PTR: REF VECTOR; ! Pointer to buffer
PTR=.RAB[RAB$A_UBF];
RAB[RAB$H_RSZ]=((.IDD[DAP$H_LENGTH]+4)/9)*2;
!9 bytes for every 2 words packed:
!========================================!
!..5! 4 ! 3 ! 2 ! 1 !
!========================================!
! 9 ! 8 ! 7 ! 6 ! 5...
!========================================!
DECR I FROM (.IDD[DAP$H_LENGTH]/9)-1 TO 0
DO BEGIN
A=B=0;
DECR J FROM 8 TO 0
DO BEGIN
A=.A+DAP$GET_BYTE(IDD[$]); ! Get a byte
ROTC(A,-8); ! Rotate
END;
PTR[0]=.A; ! Write to user's buffer
PTR[1]=.B; ! two words
PTR=.PTR+2; ! Increment the pointer
END;
A=B=0;
! If the DAP buffer is not even multiple of 9 bytes
! do the last few, and rotate the doubleword
! back to its original orientation
IF .IDD[DAP$H_LENGTH] GTR 0
THEN
BEGIN
LOCAL ROTATES; ! To make 72 bits of rotation
! when all the data is read
ROTATES=(.IDD[DAP$H_LENGTH]-9)*8;
DECR I FROM .IDD[DAP$H_LENGTH]-1 TO 0
DO BEGIN
A=.A+DAP$GET_BYTE(IDD[$]); ! Get a byte
ROTC(A,-8); ! Rotate
END;
ROTC(A,.ROTATES); ! Rotate the bytes
! the rest of the way
PTR[0]=.A; ! Write to user's buffer
PTR[1]=.B; ! two words
END;
END;
[TYP$K_CLASS_MACY11]:
BEGIN ! Just copy into buffer
LOCAL PTR;
IF .IDD[DAP$H_LENGTH] GTR (.RAB[RAB$H_USZ]*4)
THEN ![6] record too big
BEGIN
DAP$EAT_MESSAGE(IDD[$]); ![7]
RAB[RAB$H_STS]=RMS$_RTB;
$$ERROR(GET,RAB[$]);
RETURN RMS$_RTB;
END;
RAB[RAB$H_RSZ]=.IDD[DAP$H_LENGTH]; ! Msg length
PTR=CH$PTR(.RAB[RAB$A_UBF],0,8);
DECR I FROM .RAB[RAB$H_RSZ] TO 0
DO CH$WCHAR_A(DAP$GET_BYTE(IDD[$]),PTR);
END;
[INRANGE,OUTRANGE]: SIGNAL(DAP$_AOR);
TES;
RETURN RAB[RAB$H_STS]=RMS$_SUC; ! WIN
END;
[DAP$K_STATUS]: BEGIN
LOCAL E;
E=DAP$GET_STATUS(IDD[$]); ! End of file or error
RAB[RAB$H_STS]=DAP$ERROR_DAP_RMS(.E);
RAB[RAB$H_STV]=.E<DAPCODE>;
$$ERROR(GET, RAB[$]);
IF .RAB[RAB$H_STS] NEQ RMS$_SUC ! Continue if handler
THEN RETURN .RAB[RAB$H_STS]; ! fixed it, else return
END; ! error code
[OTHERWISE]: BEGIN
RAB[RAB$H_STS]=RMS$_DPE;
RAB[RAB$H_STV]=(DAP$K_MAC_SYNC^12)+
.IDD[DAP$B_OPERATOR];
$$ERROR(GET,RAB[$]);
IF .RAB[RAB$H_STS] NEQ RMS$_SUC
THEN RETURN .RAB[RAB$H_STS];
END;
! Somebody screwed up
TES
END WHILE 1;
STS$K_NORMAL ! Success
END; !End of DAP$GET
GLOBAL ROUTINE DAP$PUT (RAB,ERR) = ! Put a record (remote)
!++
! FUNCTIONAL DESCRIPTION:
!
! Put a record to an open file on another system.
!
! FORMAL PARAMETERS:
!
! RAB: A RAB as defined by RMS
! ERR: Address of error routine
!
! IMPLICIT INPUTS:
!
! NONE
!
! IMPLICIT OUTPUTS:
!
! NONE
!
! ROUTINE VALUE:
! COMPLETION CODES:
!
! NONE
!
! SIDE EFFECTS:
!
! NONE
!--
BEGIN
MAP RAB: REF $RAB_DECL; ! RMS RAB
BIND FAB=.RAB[RAB$A_FAB]: $FAB_DECL; ! RMS FAB pointed to by above
BIND DIB=.FAB[FAB$A_DIB]: $DIB; ! Data Interchange info
BIND TYP=.FAB[FAB$A_TYP]: $TYP_DECL; ! Data type
BIND ODD=.DIB[DIB$A_O_DD]: $DAP_DESCRIPTOR; ! our message descriptor
BIND CONFIG=.DIB[DIB$A_CONFIG]: $CONFIG; ! Configuration message data
BIND ROUTINE $$ERRRTN=.ERR: RMS_ERCAL;
LOCAL CLASS;
LOCAL BDATA: $XPO_DESCRIPTOR(); ! this will point to binary data
LOCAL S;
LOCAL ADATA: $STR_DESCRIPTOR(); ! this will point to ascii data
LOCAL DISPLAY: BITVECTOR[28] INITIAL(0);
LOCAL UNTERMINATED_RECORD: INITIAL(0); ! Ascii record has no terminator
LOCAL RABSAV:VOLATILE;
LOCAL ERRSAV: VOLATILE;
ENABLE DAP$HANDLE(RABSAV,ERRSAV);
ERRSAV=.ERR;
RABSAV=.RAB; ! Handler will need this
IF TYP NEQ 0 THEN CLASS=.TYP[TYP$H_CLASS]
ELSE CLASS=TYP$K_CLASS_ASCII;
IF .DIB[DIB$V_NO_SEND_CONTROL] EQL 0 ! Send control on first PUT only
THEN ! if file transfer mode,
BEGIN ! otherwise, on every PUT
DAP$PUT_CONTROL(ODD[$],RAB[$],DAP$K_PUT,DISPLAY);
DIB[DIB$V_NO_SEND_CONTROL]=1; !? File transfer mode only
END;
INIT_MESSAGE(ODD[$]); ! Initialize descriptor
ODD[DAP$B_OPERATOR]=DAP$K_DATA; ! Set up a DATA message
ODD[DAP$V_MFLAGS_LENGTH]=1; ! Always send length field
IF .RAB[RAB$Z_RAC] EQL RAB$K_RAC_BFT
THEN ! Block mode
BEGIN
ODD[DAP$H_LENGTH]=((.RAB[RAB$H_RSZ]/2)*9) ! 9 bytes each 2 words
+(%BPVAL/8)+1; ! + RECNUM field
ODD[DAP$V_MFLAGS_BITCNT]=1; ! We will send bit count
IF .RAB[RAB$H_RSZ] ! is odd number of words
THEN
BEGIN
ODD[DAP$H_BITCNT]=4; ! Last byte is only half a byte
ODD[DAP$H_LENGTH]=.ODD[DAP$H_LENGTH]+5; ! 5 bytes for last word
END
ELSE ODD[DAP$H_BITCNT]=0;
END ! End block mode
ELSE
BEGIN ! Record mode
LOCAL TPTR,
SECOND_LAST, ! 2nd-last char
LAST; ! last char
TPTR=CH$PTR(.RAB[RAB$A_RBF],0,.FAB[FAB$Z_BSZ]);
$STR_DESC_INIT(DESCRIPTOR=ADATA, STRING=(.RAB[RAB$H_RSZ],.TPTR));
TPTR=CH$PLUS(.TPTR,.RAB[RAB$H_RSZ]-2);
SECOND_LAST=CH$RCHAR_A(TPTR);
LAST=CH$RCHAR_A(TPTR);
SELECT .LAST OF
SET
[BREAK_CHARACTERS]: UNTERMINATED_RECORD=0; ! Terminator on record
[$CHLFD]:
IF .SECOND_LAST EQL $CHCRT
THEN UNTERMINATED_RECORD=2; ! Default terminator
[OTHERWISE]: UNTERMINATED_RECORD=1; ! No terminator
TES;
! If Implied CRLF, and CRLF is the terminator, then strip it off
IF .FAB[FAB$V_RAT_CR] AND (.UNTERMINATED_RECORD EQL 2)
THEN ADATA[STR$H_LENGTH]=.ADATA[STR$H_LENGTH]-2;
! For image files we must determine how many 8-bit bytes are required
! to send a record of (RSZ) (BSZ)-bit bytes, at 9 bytes per 2 words.
!
IF .CLASS EQL TYP$K_CLASS_IMAGE
THEN
BEGIN
LOCAL RSIZW; ! Record size in words
RSIZW=.ADATA[STR$H_LENGTH]/(%BPVAL/.FAB[FAB$Z_BSZ]);
ODD[DAP$H_LENGTH]=1+ ! Null recnum
((.RSIZW/2)*9)+ ! 9 bytes per 2 words
((.RSIZW AND 1)*5); ! 5 bytes for last word
END
ELSE ODD[DAP$H_LENGTH]=.ADATA[STR$H_LENGTH]+1; ! Length of record
! + null RECNUM field
! ASCII STREAM wants CRLFs in record, adjust count if necessary
IF (.FAB[FAB$Z_RFM] EQL FAB$K_RFM_STM) AND .UNTERMINATED_RECORD
THEN ODD[DAP$H_LENGTH]=.ODD[DAP$H_LENGTH]+2;
END; ! End record mode
IF .ODD[DAP$H_LENGTH] GTR .ODD[DAP$H_MESSAGE_LENGTH]
THEN ![6] Record is too big
BEGIN
RAB[RAB$H_STS]=RMS$_RTB;
$$ERROR(PUT,RAB[$]);
RETURN RMS$_RTB
END;
PUT_HEADER(ODD[$]); ! Build the message header
IF (.RAB[RAB$Z_RAC] EQL RAB$K_RAC_BFT) ! If block mode
THEN PUT_VBN(ODD[$],.RAB[RAB$G_BKT]) ! Build record number
ELSE PUT_BYTE(ODD[$],0); ! 0 length if not used
! Note that DAP Bucket numbers start at 1, RMS-36 starts at 0
!Now! At Last!!! The Data!!!!!
CASE .CLASS FROM 0 TO TYP$K_CLASS_MAX OF
SET
[TYP$K_CLASS_ASCII]:
BEGIN
DAP$PUT_STRING(ODD[$],ADATA); ! Put the data in
! ASCII STREAM wants records terminated
IF .UNTERMINATED_RECORD AND (.FAB[FAB$Z_RFM] EQL FAB$K_RFM_STM)
THEN DAP$PUT_STRING(ODD[$],D_CRLF); ! Put back the CRLF
END;
[TYP$K_CLASS_IMAGE]:
BEGIN ! Binary Data
LOCAL PTR: REF VECTOR; ! Pointer to buffer
PTR=.RAB[RAB$A_RBF];
!9 bytes for every 2 words (round up), packed:
!========================================!
!..5! 4 ! 3 ! 2 ! 1 !
!========================================!
! 9 ! 8 ! 7 ! 6 ! 5...
!========================================!
DECR I FROM (.RAB[RAB$H_RSZ]/2)-1 TO 0
DO BEGIN
REGISTER A=LOAC;
REGISTER B=HIAC;
A=.PTR[0]; ! Get a word of data
B=.PTR[1]; ! and another word
PTR=.PTR+2; ! Increment the pointer
DECR J FROM 8 TO 0
DO BEGIN
! B is passed to Put-byte to convince the BLISS compiler
! not to trash the register. BLISS does not know what
! ROTC does, so it 'optimizes' and steps on register B
DAP$PUT_BYTE(.B,ODD[$],.A);! Put out a byte
ROTC(A,-8); ! Rotate to next one
END;
END;
IF .RAB[RAB$H_RSZ] ! If the record length is odd
THEN
BEGIN
REGISTER A=LOAC;
A=.PTR[0]; ! Get the last word
DECR I FROM 4 TO 0
DO BEGIN
PUT_BYTE(ODD[$],.A); ! Put out a byte
A=.A^-8; ! Shift to next one
END;
END;
END;
[TYP$K_CLASS_MACY11]:
BEGIN
! Conversion has already been done, just send this
LOCAL PTR;
PTR=CH$PTR(.RAB[RAB$A_RBF],0,8);
DECR I FROM .RAB[RAB$H_RSZ]-1 TO 0
DO DAP$PUT_BYTE(ODD[$],CH$RCHAR_A(PTR));
END;
[INRANGE,OUTRANGE]: SIGNAL(DAP$_AOR);
TES;
IF NOT .FAB[FAB$V_FOP_DFW] ! If write is not deferred
THEN DAP$PUT_MESSAGE(ODD[$]); ! Send out the message
RAB[RAB$H_STS]=RMS$_SUC ! WIN
END; !End of DAP$PUT
ROUTINE DAP$CONNECT (RAB,ERR) = ! Connect RAB to FAB
!++
! FUNCTIONAL DESCRIPTION:
!
! Connect RAB to FAB for an open file on another system.
!
! FORMAL PARAMETERS:
!
! RAB: A RAB as defined by RMS
! ERR: Address of error routine
!
! IMPLICIT INPUTS:
!
! NONE
!
! IMPLICIT OUTPUTS:
!
! NONE
!
! ROUTINE VALUE:
! COMPLETION CODES:
!
! NONE
!
! SIDE EFFECTS:
!
! NONE
!--
BEGIN
MAP RAB: REF $RAB_DECL; ! RMS RAB
BIND FAB=.RAB[RAB$A_FAB]: $FAB_DECL; ! RMS FAB pointed to by above
BIND DIB=.FAB[FAB$A_DIB]: $DIB; ! Data Interchange info
BIND ODD=.DIB[DIB$A_O_DD]: $DAP_DESCRIPTOR;! our output message descriptor
BIND IDD=.DIB[DIB$A_I_DD]: $DAP_DESCRIPTOR;! our input message descriptor
BIND ROUTINE $$ERRRTN=.ERR: RMS_ERCAL;
local s; !?temp
LOCAL BDATA: $XPO_DESCRIPTOR(); ! this will point to binary data
LOCAL ADATA: $STR_DESCRIPTOR(); ! this will point to ascii data
LOCAL DISPLAY: BITVECTOR[28];
LOCAL RABSAV: VOLATILE;
LOCAL ERRSAV: VOLATILE;
ENABLE DAP$HANDLE(RABSAV,ERRSAV);
ERRSAV=.ERR;
RABSAV=.RAB; ! Handler will need this
CLEARV(DISPLAY);
DAP$PUT_CONTROL(ODD[$],RAB[$],DAP$K_CONNECT,DISPLAY);
DAP$PUT_MESSAGE(ODD[$]);
DIB[DIB$V_NO_SEND_CONTROL]=0; ! Send control on first Get or Put
IF (S=DAP$GET_ACK(IDD[$]))
THEN
BEGIN
RAB[RAB$H_STS]=RMS$_SUC; ! WIN
STS$K_NORMAL ! Win
END
ELSE
BEGIN
RAB[RAB$H_STS]=DAP$ERROR_DAP_RMS(.S);
RAB[RAB$H_STV]=.S<DAPCODE>; ! Extract DAP code from status
$$ERROR(CONNECT,RAB[$])
END
END; !End of DAP$CONNECT
END !End of module
ELUDOM