Trailing-Edge
-
PDP-10 Archives
-
bb-m080u-sm_t20_v7_0_23_mon_src_mod
-
monitor-sources/cdpsrv.mac
There are 43 other files named cdpsrv.mac in the archive. Click here to see a list.
; UPD ID= 8485, RIP:<7.MONITOR>CDPSRV.MAC.3, 9-Feb-88 12:17:19 by GSCOTT
;TCO 7.1218 - Update copyright notice.
; *** Edit 7193 to CDPSRV.MAC by WONG on 14-Nov-85
; Fix undefined symbol (LPTTIM) when LPTN=0
; UPD ID= 2053, SNARK:<6.1.MONITOR>CDPSRV.MAC.6, 3-Jun-85 14:18:36 by MCCOLLUM
;TCO 6.1.1406 - Update copyright notice.
; UPD ID= 4505, SNARK:<6.MONITOR>CDPSRV.MAC.5, 12-Jul-84 20:17:21 by PURRETTA
;Update copyright notice
; UPD ID= 4256, SNARK:<6.MONITOR>CDPSRV.MAC.4, 30-May-84 11:15:33 by MOSER
;TCO 6.2071 - CHANGE CDPSV TO PCDPSV
; UPD ID= 1054, SNARK:<6.MONITOR>CDPSRV.MAC.3, 9-Aug-82 15:39:13 by PAETZOLD
;TCO 6.1219 - Extend CDPDTB for RLJFD
; UPD ID= 116, SNARK:<6.MONITOR>CDPSRV.MAC.2, 16-Oct-81 17:45:58 by MURPHY
;TCO 6.1030 - Node names in filespecs; etc.
;Revise DTB format; get rid of double skips on NLUKD, etc.
; UPD ID= 600, SNARK:<5.MONITOR>CDPSRV.MAC.2, 4-Jun-80 15:20:52 by KONEN
;Put storage section into RSDAT PSECT
;<4.MONITOR>CDPSRV.MAC.2, 4-Mar-79 14:41:54, Edit by KONEN
;UPDATE COPYRIGHT FOR RELEASE 4
; COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1976, 1988.
; ALL RIGHTS RESERVED.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
; ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
; INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
; COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
; OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
; TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
; AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
; CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
; SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
SEARCH PROLOG
TTITLE (CDPSRV,,< - CARD PUNCH SERVICE, K. T. PRUYN>)
;LOCAL STORAGE DECLARED IN STG.MAC
;SPECIAL AC DEFINITIONS USED HEREIN
DEFAC (IOS,Q2) ;DEVICE STATUS BITS
DEFAC (STS,P1) ;SEE GTJFN FOR FUNCTIONS
DEFAC (JFN,P2)
; Parameters
CDP=110 ; CDP device code
CDPLVL==5 ; CDP INTERRUPT LEVEL
RETRY==3 ; PUNCH RETRY COUNT
CPTIMV==^D5000 ; VALUE OF CHECKING INTERVAL, MS.
; CONO/CONI BITS
CO.INI==1B20 ;MANUAL TO THE CONTRARY NOTWITHSTANDING
;THIS BIT REALLY IS NEEDED TO CLEAR PUNCH
CO.RJT==1B21 ;REJECT/OFFSET CARD
CO.EJT==1B23 ;EJECT A CARD
CO.PID==1B24 ;DISABLE PI INTERRUPTS ON TROUBLE
CO.PIE==1B25 ;ENABLE PI INTERRUPTS ON TROUBLE
CO.CLR==1B26 ;CLEAR ERROR FLOP
CO.DIE==1B27 ;DISABLE END OF CARD INTERRUPTS
CO.EIE==1B28 ;ENABLE END OF CARD INTERRUPTS
CO.CEO==1B29 ;CLEAR END OF CARD FLOP
CO.PON==1B30 ;TURN ON PUNCH MOTOR
CO.CDR==1B31 ;CLEAR DATA REQUEST FLOP
CO.SDR==1B32 ;SET DATA REQUEST FLOP
CO.GO==CO.PIE!CO.EIE!CO.CLR!CO.CEO!CO.PON+CDPLVL
CI.OFL==1B18 ;OFF LINE
CI.HSC==1B21 ;HOPPER/STACKER OR CHAD BOX FULL
CI.PIK==1B22 ;PICK FAILURE
CI.JAM==1B23 ;EJECT FAILURE
CI.TRB==1B24 ;TROUBLE
CI.TIE==1B25 ;TROUBLE INTERRUPTS ENABLED
CI.ERR==1B26 ;DATA OR TIMING ERROR
CI.CIP==1B27 ;CARD IN PUNCH
CI.ECI==1B28 ;END-OF-CARD INTERRUPTS ENABLED
CI.EOC==1B29 ;END OF CARD
CI.PON==1B30 ;PUNCH IS ON
CI.BSY==1B31 ;PUNCH IS BUSY
CI.DRQ==1B32 ;DATA REQUEST
CI.NDE==CI.OFL!CI.HSC!CI.PIK!CI.JAM!CI.TRB ;NON DATA ERROR
CI.BAD==CI.OFL!CI.HSC!CI.PIK!CI.JAM!CI.TRB!CI.ERR ;TROUBLE CHECKING BITS
CI.HRD==CI.PIK!CI.JAM!CI.ERR ;PROBLEMS THAT CAN'T WAIT TILL END OF CARD
CDPINT==CI.TRB!CI.ERR!CI.EOC!CI.DRQ ;ACTIVE INTERRUPT MASK
;DATA BUFFER HAS ITEM COUNT AND OUTPUT POINTER SET UP BY DMPBUF
;FOR USE DIRECTLY BY INTERRUPT SERVICE. THESE ARE OFFSETS.
CNTOFS==0 ;OFFSET TO ITEM COUNT
PNTOFS==1 ;OFFSET TO POINTER
DATOFS==2 ;OFFSET TO DATA
; Flags in CDPsts and ios
FLG(ALTP,L,IOS,400000) ; Buffer 2 for prog
FLG(ALTI,L,IOS,200000) ; Buffer 1 for int
FLG(OPN,L,IOS,040000) ; CDP is open
FLG(ASCII,L,IOS,020000) ; ASCII MODE, 7-BIT BYTE
FLG(IMAGE,L,IOS,010000) ; IMAGE MODE, 12-BIT BYTE
FLG(NOMSG,L,IOS,004000) ; NO ERROR MESSAGE WANTED
FLG(CDPERR,L,IOS,002000) ; ERROR HAS HAPPENED
FLG(STOP,L,IOS,001000) ; CLOSE WAS DONE, EOF BUFF SET UP IF NEEDED
FLG(EJECT,L,IOS,000400) ; CARD WAS EJECTED
FLG(CDPDUN,L,IOS,000200) ;OUTPUT COMPLETE
FLG(COL80,L,IOS,100) ;CARD WITH FULL 80 COLUMNS, SPECIAL EOC INTERRUPT HANDLING
FLG(START,L,IOS,40) ;OK TO START NEW CARD(IN CASE EOC INT LOST)
FLG(FULL,L,IOS,20) ;NO BLANK CARD FROM LF AFTER FULL 80 COLS
FLG(MOOL,L,IOS,10) ;OPERATOR INTERVENTION NEEEDED
FLG(MOFER,L,IOS,4) ;FATAL ERROR HAPPENED
FLG(MOCOL,L,IOS,2) ;PUNCH IS ON-LINE
FLG(PSION,L,IOS,1) ;SOFTWARE INTERRUPT REQUESTED BY USER
; CDP dispatch table
SWAPCD
CDPDTB::CDPDTL ;LENGTH
DTBDSP CDPDIR ; Set directory
DTBBAD(DESX9) ; Name lookup
DTBBAD(DESX9) ; Extension lookup
DTBBAD(DESX9) ; Version lookup
DTBBAD(DESX9) ; Protection insertion
DTBBAD(DESX9) ; Account insertion
DTBBAD(DESX9) ; Status insertion
DTBDSP(CDPOPN) ; CDP open
DTBBAD(DESX9) ; Input
DTBDSP(CDPSQO) ; Output
DTBDSP(CDPCLZ) ; Close
DTBBAD(DESX9) ; Rename
DTBBAD(DESX9) ; Delete
DTBBAD(DUMPX6) ;DUMPI
DTBBAD(DUMPX6) ;DUMPO
DTBBAD(DESX9) ; Mount
DTBBAD(DESX9) ; Dismount
DTBBAD(DESX9) ; Init directory
DTBDSP(CDPMTO) ; MTOPR
DTBBAD(DESX9) ; Get status
DTBBAD(DESX9) ; Set status
DTBDSP(CDPROT) ; RECORD OUT
DTBDSP(RFTADN) ; READ TAD
DTBDSP(SFTADN) ; SET TAD
DTBDSP (BIOINP) ;SET JFN FOR INPUT
DTBDSP (BIOOUT) ;SET JFN FOR OUTPUT
DTBBAD (GJFX49) ;CHECK ATTRIBUTE
DTBSKP ;RELEASE JFN
CDPDTL==:.-CDPDTB ;GLOBAL LENGTH OF DISPATCH TABLE
CDPDIR: TQO NNAMF ;NO NAME DEVICE
MOVEI A,DESX9
RET
; Initialize punch
; Call: CALL CDPINI
; Returns
; +1 ; Always (called at system initialization time
RESCD
CDPINI::CONO CDP,CO.INI ;CLEAR PHYSICAL PUNCH
SETZM CDPSTS ;CLEAR STATUS WORD
SETOM CDPLCK ;INITIALIZE LOCK
SETOM CDPCNT ;CLEAR BUFFER COUNT
RET
CDPRST::CONO CDP,CO.INI
RET
;SECTION TO PROCESS MTOPR CALLS
SWAPCD
CDPMTO: TQNN <OPNF> ;SEE IF OPENED
RETBAD (CLSX1) ;NOT OPEN, ERROR
MOVE IOS,CDPSTS ;GET STATUS
CAIN B,.MOPSI ;CHECK FUNCTION REQUESTED
JRST CDPPSI ;ENABLE PSI
CAIN B,.MORST
JRST CPRSTS ;READ STATUS
RETBAD (MTOX1) ;ILLEGAL FUNCTION
; .MOPSI - ENABLE FOR PSI INTERRUPTS ON OPERATOR-ATTENTION CONDITIONS
CDPPSI: MOVEI A,1 ;GET OFFSET TO PSI CHANNEL IN ARG BLOCK
CALL GETWRD ;GET PSI CHANNEL TO ENABLE
RETBAD (MTOX13) ;ARGUMENT BLOCK TOO SMALL
CAIL B,0 ;CHECK THAT GIVEN PSI CHANNEL IS A VALID
CAILE B,5 ; ASSIGNABLE CHANNEL
JRST [ CAIL B,^D24 ;CHECK THAT GIVEN PSI CHANNEL IS A VALID
CAILE B,^D35 ; ASSIGNABLE CHANNEL
RETBAD (MTOX14) ;BAD PSI CHANNEL NUMBER GIVEN
JRST .+1 ] ;PSI CHANNEL OK, RETURN
MOVEM B,CDPSIC ;SAVE PSI CHANNEL TO INTERRUPT ON
TQO <PSION> ;SET INTERRUPT DESIRED FLAG
MOVEI A,2 ;GET OFFSET TO FLAG WORD
CALL GETWRD ;GET FLAGS FROM USER
JRST MTORET ;NO FLAG WORD, RETURN
TXNE B,MO%MSG ;USER WANT TO SUPPRESS MESSAGES ?
TQO <NOMSG> ;YES, MARK THAT "PROBLEM ON DEVICE" ISN'T WANTED
; CDPPSI COMMON RETURN
MTORET: MOVEM IOS,CDPSTS ;SAVE STATUS
RETSKP ;RETURN TO USER
;.MORST -- READ STATUS
CPRSTS: MOVE IOS,CDPSTS ;GET STATUS
SETZB A,B ;CLEAR BITS
;DOES PUNCH EXIST?
CONSO CDP,-1 ;IT'S THERE IF IT GIVES US ANYTHING
JRST [ CONO CDP,5 ;TRY TO SET PRIORITY
TXO B,MO%FNX ;SET FLAG IN CASE
CONSO CDP,5 ;IF NOT SET THERE IS NOBODY THERE
JRST CPRS ;NON-EXISTANT
CONO CDP,0 ;RESTORE 0 PRIORITY
TXZ B,MO%FNX ;CLEAR NON-EX BIT
JRST .+1] ;CONTINUE WITH STATUS
; TQNE <MOCOL>
; TXO B,MO%COL ;PUNCH IS ON-LINE
;*********FOR SOME REASON MO%COL IS NOT IN MONSYM???
TQNE <MOFER>
TXO B,MO%FER!MO%HE ;FATAL HARDWARE ERROR
TQNE <CDPDUN>
TXO B,MO%EOF ;NO OUTPUT PENDING
TQNN <CDPDUN>
TXO B,MO%IOP ;OUTPUT IN PROCESS
TQNE <MOOL>
TXO B,MO%OL ;WAITING FOR OPERATOR ACTION
MOVE A,CDPCON ;GET DEVICE STATUS
TXNE A,CI.PIK
TXO B,MO%PCK ;PICK OR STACK FAILURE
TXNE A,CI.HSC
TXO B,MO%SFL!MO%HEM ;STACKER FULL OR HOPPER EMPTY
CPRS: MOVEI A,1 ;SET OFFSET
CALL PUTWRD ;RETURN STATUS
RETBAD (MTOX13) ;USER BLOCK TOO SMALL
RETSKP ;OK
;RECORD OUT -- USED TO HANDLE SOUTR
SWAPCD
CDPROT: TQNN <WNDF> ;ANY BUFFER SET UP?
CALL DMPBUF ;IF SO, SEND IT OUT
RETSKP
;THIS SECTION WILL BE MOVED TO STG, ETC. *******
.PSECT RSDAT
CDPSIC: 0 ;SOFTWARE INTERRUPT CHANNEL
CDPTRY: 0 ;ERROR RETRY COUNT
CDPBYT: 0 ;BYTE PASSED ON FROM USER, BEING CONVERTED
CDPNBR: 0 ;# BYTES TO BE OUTPUT FROM ONE USER BYTE
CDPNNB: 0 ;NUMBER OF COLUMNS TO LAST NON-BLANK IN BUFFER
CDPWBP: 0 ;WORKING POINTER TO FILL BUFFER
CDPWBC: 0 ;DOWN COUNTER FOR FILLING ACTIVE BUFFER
CDPCON: 0 ;CDP CONI BITS
CDPWPC: 0 ;WORKING POSITION COUNTER
CDPFRK: 0 ;FORK OF USER
CONHST: BLOCK 20 ;CONI HISTORY, SAVED IN RING
CNHCNT: 0 ;CONI COUNTER, CONTROLS RING
; Open CDP
; Call: JFN ; Jfn
; CALL CDPOPN
; Returns
; +1 ; Error, error number in 1
; +2 ; Ok,
SWAPCD
CDPOPN: LOCK CDPLCK,<CALL LCKTST>
MOVE IOS,CDPSTS
TQNE <WRTF> ;MUST WANT WRITE,
TQNE <READF> ; BUT NOT READ
RETBAD(OPNX13,<UNLOCK CDPLCK>) ;CDP NOT OPEN THAT WAY!
CONI CDP,CDPCON ;GET CDP STATUS BITS
TQO <MOCOL> ;PUNCH ON-LINE(MAY CHANGE BELOW)
CONSZ CDP,CI.NDE ;PUNCH OK?
JRST [ TQO <MOOL> ;PUNCH NOT-OK, SET OFF-LINE
TQZ <MOCOL> ;CLEAR ON-LINE
CALL CHKOFL ;USER WANT OPEN ANYWAY?
RETBAD (OPNX8,<UNLOCK CDPLCK>) ;NO, TAKE ERROR RETURN
CONI CDP,CDPCON ;SAVE STATUS FOR LATER CHECKING
JRST .+1] ;CONTINUE WITH OPEN
TQOE <OPN> ; Test and set opn flag
RETBAD(OPNX9,<UNLOCK CDPLCK>) ;ALREADY OPN, GIVE BUSY RETURN
TXZ IOS,ALTP!ALTI!IMAGE!ASCII!EJECT!STOP!CDPERR
LDB A,[POINT 4,STS,35] ; Get mode
JUMPE A,CDPOP1 ; NORMAL mode only
RETBAD(OPNX14,<UNLOCK,CDPLCK>)
CDPOP1: LDB A,PBYTSZ ; GET BYTE SIZE TO DETERMINE MODE
CAIN A,7
TQO <ASCII> ; IF 7 BIT SET ASCII MODE
CAIN A,^D12
TQO <IMAGE> ; IF 12 BIT SET IMAGE MODE
TQNN <IMAGE,ASCII> ; MAKE SURE SOME MODE WAS SET
RETBAD(OPNX14,<UNLOCK,CDPLCK>) ; NONE WAS, ERROR
SETOM CDPCNT ; No full buffers
SETZM CDPITC ; No items in current buffer
SETZM CDPSIC ;CLEAR SOFTWARE INTERRUPT CHANNEL
SETZM FILBYN(JFN) ; CLEAR MONITOR'S BYTE NUMBER
SETZM FILLEN(JFN) ; CLEAR MONITOR'S COUNTER
SETZM FILBYT(JFN) ; CLEAR MONITOR'S POINTER
SETZM FILCNT(JFN) ; CLEAR MONITOR'S UP-COUNTER
TQO <WNDF> ; NO BUFFER SET UP
TQO <CDPDUN> ; NO OUTPUT PENDING
MOVEM IOS,CDPSTS ; Store CDP status word
MOVE A,FORKX ;SAVE USER FORK
MOVEM A,CDPFRK
UNLOCK CDPLCK
RETSKP
; Close CDP
; Call: JFN ; Jfn
; CALL CDPCLZ
; Returns
; +2 ; Always
CDPCLZ: TXNE A,CZ%ABT ; IS THIS AN ABORT TYPE OF CLOSE?
JRST CDPCL2 ; YES, DONT FINISH OUT WITH EOF CARD
MOVE IOS,CDPSTS ;RESTORE STATUS
TQNN <WNDF> ; IS THERE A BUFFER SET UP?
JRST [ SKIPLE CDPWPC ;YES, ANYTHING IN IT?
CALL DMPBUF ; YES,Dump partial buffer
JRST .+1]
TQNN <ASCII> ;ASCII MODE NEEDS EOF CARD
JRST CDPCLF ;NONE REQUIRED
; SET UP EOF CARD OUTPUT
TQNN <STOP> ;EOF ALREADY SET UP?
JRST [ CALL SETBUF ;NO, SET UP EOF CARD OUTPUT
JRST [ CALLRET CDPSBF] ;CAN'T GET BUFFER NOW, WAIT.
CALL EOFSET ;HAVE BUFFER SET UP EOF.
CALL DMPBUF ;SEND IT OUT
JRST .+1]
CDPCLF: SKIPL CDPCNT ;CHECK FOR ALL BUFFERS DONE
JRST [ MOVE A,[XWD CDPCNT,CDPFIN]
TQO <BLKF> ;DISMISS TILL LAST BUFFER OUT
MOVEM IOS,CDPSTS
RET]
TQZN <CDPERR> ;ERROR BIT ON?
JRST CDPCL2 ;NO,JUMP
TQO <ERRF> ;RETURN ERROR FLAG
CDPCL2: CALL CDPINI ; CLEAN UP
RETSKP
;LOCAL SUBROUTINE TO SET UP EOF CARD OUPUT BUFFER
EOFSET: MOVEI A,7417 ;EOF CODE
EOF1: IDPB A,CDPWBP ;SAVE BYTE
SOSLE CDPWBC ;COUNT IT
JRST EOF1 ;DO SOME MORE
MOVEI A,^D80 ;SET COUNT FOR OUTPUT
MOVEM A,CDPNNB
TQO <STOP> ;MARK THAT STOPPING HAS BEEN STARTED
RET ;RETURN +1 ALWAYS
CDPSBF: MOVEM IOS,CDPSTS ;SAVE IOS
MOVE A,[XWD CDPCNT,CDPTST]
TQO <BLKF> ;SET FLAG TO CAUSE DISMIS TO BE DONE
RET ;AND RETURN
; CDP sequential output
; Call: A ; Byte
; JFN ; Jfn
; CALL CDPSQO
; Returns
; +1 ; Always
;SEQUENTIAL OUTPUT
;
;ACCEPTS BYTE BY BYTE FROM THE USER, CONVERTS TO CARD COLUMN(S),
;AND PLACES OUTPUT BYTE(S) IN BUFFER. WHEN BUFFER IS FULL OUTPUT IS
;INITIATED. ONE USER BYTE MAY PRODUCE ONE OR MORE OR NO OUTPUT BYTES
;WHEN OPERATING IN 7 BIT MODE.
CDPSQO: MOVE IOS,CDPSTS ;FETCH STATUS WORD
MOVEM A,CDPBYT ;SAVE USERS BYTE
SETOM CDPNBR ;CDPNBR=-1 MEANS NEW BYTE BEING PROCESSED
CDPS01: TQNE <WNDF> ;IS A BUFFER SET UP?
JRST [ CALL SETBUF ;NO, GO SET UP A BUFFER
JRST [ CALLRET CDPSBF] ; CAN'T SET ONE UP, GO BLOCK
JRST .+1]
CALL PRCBYT ;TRANSLATE USER BYTE TO CARD COLUMN(S)
SKIPG CDPNBR ;SKIPS IF AN OUTPUT BYTE WAS RETURNED
JRST SQORET ;USER BYTE WAS IGNORED
IDPB A,CDPWBP ;PUT OUTPUT BYTE IN BUFFER
AOS CDPWPC ;COUNT CURRENT CARD POSITION
JUMPN A,[MOVE A,CDPWPC ; IF BYTE IS NOT BLANK SAVE CURRENT POSITION
MOVEM A,CDPNNB ; AS LAST NON-BLANK POSITION FOR OUTPUT
JRST .+1]
SOSG CDPWBC ;BUFFER FULL?
JRST [ CALL DMPBUF ;YES, SEND IT OUT
TQO <FULL> ;SET FLAG TO PREVENT BLANK IF NEXT NON-
; IGNORED CHARACTER IS LF
JRST .+1]
SOSLE CDPNBR ;ANY MORE OUTPUT BYTES FROM THIS USER BYTE?
JRST CDPS01 ;MORE OUTPUT
SQORET: MOVEM IOS,CDPSTS ;SAVE STATUS
RET
;THIS SECTION PROCESSES THE BYTE INPUT FROM USER. IT PRODUCES
;SOME NUMBER OF OUTPUT BYTES FOR EACH INPUT BYTE.
;
;IF THE MODE IS 12 BIT THE INPUT BYTE IS RETURNED AS IS.
;
;IF THE MODE IS 7 BIT AN ASCII TO CARD CODE CONVERSION IS DONE.
;
;CARD CODE CONVERSION IS DONE AS FOLLOWS:
; ALL 128 POSSIBLE CODES HAVE A 12 BIT COLUMN CODE INCLUDING
; CONTROL CODES AND NULL AND RUBOUT AS DEFINED BY THE ANSII
; STANDARD BUT WITH FIVE EXCEPTIONS AS DEFINED BY THE DEC
; STANDARD. THE EXCEPTIONS ARE --
; CARRIAGE RETURN IS ALWAYS IGNORED,
; LINE FEED, FORM FEED, AND VERTICAL TAB ARE NEVER PUNCHED,
; BUT ALL CAUSE A "SKIP TO THE NEXT CARD",
; TAB RETURNS ENOUGH BLANKS TO MOVE TO NEXT 8TH POSITION.
PRCBYT:
TQNE <ASCII>
JRST PRCASC ;PROCESS ASCII CONVERSION
;12 BIT MODE IS DEFAULT
MOVEI A,1 ;ONE BYTE IS RETURNED
MOVEM A,CDPNBR
MOVE A,CDPBYT ;RETURN USER BYTE AS IS.
RET
PRCASC: SKIPLE CDPNBR ;SEE IF WE ARE COUNTING SPACES FOR A TAB
JRST [SETZ A ;WE ARE TABBING
RET] ;JUST RETURN A BLANK
SETZM CDPNBR ;CLEAR RETURN COUNT IN CASE CHAR IGNORED
MOVE A,CDPBYT ;GET THE BYTE
CAIN A,15 ;CARRIAGE RETURN?
RET ; YES, IGNORE CR
; FF,VT,LF ALL CAUSE SKIP TO NEXT CARD UNLESS ONE WAS JUST COMPLETED
; BY PUNCHING IN COLUMN 80
CAIGE A,12 ;LOOKING FOR 12,13,14
JRST PRC2 ;TOO LOW
CAILE A,14
JRST PRC2 ;TOO HIGH
;JUST RIGHT -- START NEW CARD
PRC1: TQZN <FULL> ;NO BLANK FROM LF AFTER 80 CHARACTERS
CALL DMPBUF ; YES, START CARD OUT
RET ; AND OTHERWISE IGNORE BYTE
PRC2: TQZ <FULL> ;ANY NON-IGNORED CHARACTER STARTS NEW CARD
CAIN A,11 ;TAB?
JRST [ MOVE A,CDPWPC ;TAB. GET NUMBER OF BLANKS TO SEND
ANDI A,7 ;REMAINDER OF CDPWPC/8 GIVES
MOVNS A ;NUMBER OF POSITIONS PAST LAST
ADDI A,8 ;STOP. TAKE FROM 8 TO GET NUMBER
MOVEM A,CDPNBR ;OF BLANK BYTES TO RETURN.
SETZ A ;BLANK BYTE TO RETURN.
RET]
;CONVERT CHARACTER TO CARD COLUMN FROM TABLE
ASCNV: IDIVI A,3 ;3 CHARACTERS PER TABLE WORD
LDB A,CRDPTR(B) ;GET 12 BIT BYTE FROM TABLE
AOS CDPNBR ;INCR BYTE CNT FROM 0 TO 1
RET
CRDPTR: POINT 12,CODE(T1),11
POINT 12,CODE(T1),23
POINT 12,CODE(T1),35
CODE: BYTE (12) 5403,4401,4201 ;NUL SOH STX
BYTE (12) 4101,0005,1023 ;ETX EOT ENQ
BYTE (12) 1013,1007,2011 ;ACK BEL BS
BYTE (12) 4021,1021,4103 ;HT LF VT
BYTE (12) 4043,4023,4013 ;FF CR SO
BYTE (12) 4007,6403,2401 ;SI DLE DC1
BYTE (12) 2201,2101,0043 ;DC2 DC3 DC4
BYTE (12) 0023,0201,1011 ;NAK SYN ETB
BYTE (12) 2003,2403,0007 ;CAN EM SUB
BYTE (12) 1005,2043,2023 ;ESC FS GS
BYTE (12) 2013,2007,0000 ;RS US SPACE
BYTE (12) 4006,0006,0102 ;! " #
BYTE (12) 2102,1042,4000 ;$ % &
BYTE (12) 0022,4022,2022 ;' ( )
BYTE (12) 2042,4012,1102 ;* + ,
BYTE (12) 2000,4102,1400 ;- . /
BYTE (12) 1000,0400,0200 ;0 1 2
BYTE (12) 0100,0040,0020 ;3 4 5
BYTE (12) 0010,0004,0002 ;6 7 8
BYTE (12) 0001,0202,2012 ;9 : ;
BYTE (12) 4042,0012,1012 ;< = >
BYTE (12) 1006,0042,4400 ;? @ A
BYTE (12) 4200,4100,4040 ;B C D
BYTE (12) 4020,4010,4004 ;E F G
BYTE (12) 4002,4001,2400 ;H I J
BYTE (12) 2200,2100,2040 ;K L M
BYTE (12) 2020,2010,2004 ;N O P
BYTE (12) 2002,2001,1200 ;Q R S
BYTE (12) 1100,1040,1020 ;T U V
BYTE (12) 1010,1004,1002 ;W X Y
BYTE (12) 1001,4202,1202 ;Z [ \
BYTE (12) 2202,2006,1022 ;] ^ _
BYTE (12) 0402,5400,5200 ;` a b
BYTE (12) 5100,5040,5020 ;c d e
BYTE (12) 5010,5004,5002 ;f g h
BYTE (12) 5001,6400,6200 ;i j k
BYTE (12) 6100,6040,6020 ;l m n
BYTE (12) 6010,6004,6002 ;o p q
BYTE (12) 6001,3200,3100 ;r s t
BYTE (12) 3040,3020,3010 ;u v w
BYTE (12) 3004,3002,3001 ;x y z
BYTE (12) 5000,6000,3000 ;{ | }
BYTE (12) 3400,4005,0000 ;~ DEL UNUSED
;THIS SECTION STARTS A BUFFER OUT TO THE PUNCH.
;IF A BUFFER IS ALREADY ON ITS WAY OUT A FLAG IS SET
;SO INTERRUPT SERVICE JUST KEEPS GOING AT THE END
;OF THE PRESENT BUFFER.
DMPBUF: TQC <ALTP> ;COMPLEMENT BUFFER
MOVEM IOS,CDPSTS ;IT PROBABLY ISN'T NECESSARY TO SAVE THIS NOW
MOVEI A,CDPBF1 ; GET BUFFER ADDRESS
TQNN <ALTP>
MOVEI A,CDPBF2
SKIPG B,CDPNNB ;GET COUNT TO LAST NON-BLANK
MOVEI B,1 ;ALWAYS AT LEAST ONE COLUMN OUT
MOVEM B,CNTOFS(A) ;SAVE IN BUFFER HEADER
MOVE B,[POINT 12,0] ;FORM OUTPUT POINTER
HRRI B,DATOFS(A) ;DATA ADDRESS
MOVEM B,PNTOFS(A) ;SAVE POINTER IN HEADER
AOSN CDPCNT ;COUNT FULL BUFFER
JRST [ TQO <START> ; TELL INT SVC THAT IT'S OK TO START
CONO CDP,CO.GO ; IF FIRST BUFFER AND START PUNCH
JRST .+1]
TQO <WNDF> ; MARK THAT A BUFFER IS NOT SET UP
RET
;SETBUF -- SETS UP A BUFFER TO ACCEPT OUTPUT BYTES
; IF BOTH BUFFERS ARE BUSY SETBUF WAITS FOR ONE
SETBUF: SKIPLE CDPCNT ;BOTH BUFFERS IN USE?
RET ;ERROR RETURN, BUFFERS BUSY
MOVEI A,CDPBF1+DATOFS ;GET ADDRESS OF FIRST OR SECOND BUFFER
TQNE <ALTP> ; DETERMINED BY SETTING OF ALTP
MOVEI A,CDPBF2+DATOFS
SETZM (A) ;BLANK CARD GETS ONE BLANK COLUMN OUT
HRRM A,CDPWBP ;SAVE ADDRESS IN WObKING BYTE POINTER
MOVE A,[POINT 12,0] ;SET UP REST OF BYTE POINTER
HLLM A,CDPWBP
MOVEI A,^D80 ;SET DOWN COUNTER FOR 80 COLUMN CARD
MOVEM A,CDPWBC
SETZM CDPNNB ;CLEAR POINTER TO LAST NON-BLANK
SETZM CDPWPC ;CLEAR WORKING POSITION COUNTER
TQZ <WNDF> ;MARK THAT BUFFER IS READY
TQO <CDPDUN> ;SOME OUTPUT IS PENDING
RETSKP ;OK RETURN
; CDP interrupt routine
RESCD
PCDPSV::CONSO CDP,CDPINT ; CDP interrupt?
RET ;NO
MOVEM IOS,CDPSIO ; Save ios
MOVE IOS,CDPSTS ; Get status word
CONI CDP,CDPCON ;SAVE CDP CONDITION
;SAVE CONI BITS IN A RING TO PROVIDE SOME HISTORY IN CASE U NEED IT
MOVE A,CNHCNT ;GET COUNT
ANDI A,17 ;EXTRACT ENOUGH TO INDEX RING
AOS CNHCNT ;COUNT CONI
MOVE B,CDPCON ;GET BITS
MOVEM B,CONHST(A) ;SAVE THEM
CONSZ CDP,CI.BAD ; ANY PROBLEMS?
JRST SVERP ; YES, PROCESS ERROR
CONSZ CDP,CI.EOC ;END OF CARD?
JRST SVEOC ;YES
SKIPG CDPITC ;ITEMS IN BUFFER?
JRST CDPSV2 ;BUFFER EMPTY, LOOK FOR ANOTHER
CDPSV1: ILDB A,CDPPTR ;GET BYTE FROM BUFFER
DATAO CDP,A ; SEND IT OUT
SOSG CDPITC ; COUNT IT
TQO <EJECT> ;SET EJECT FLAG AFTER LAST ITEM OUT
CDPXIT: MOVEM IOS,CDPSTS
MOVE IOS,CDPSIO
JRST CDPCHR
;MADE IT TOO END OF CARD UNLESS ERROR FLAG IS ON.
;IF CARD OK COUNT DOWN THE BUFFER AND PRIME PUNCH FOR ANOTHER
SVEOC: TQO <START> ;CARD FINISHED OK. START CARD ON NEXT DATA REQ.
TQZE <CDPERR> ;WAS CARD BAD?
JRST SVEOC1 ;WAS BAD, JUST RESTART PUNCH
SOS CDPCNT ;COUNT BUFFER
MOVEI A,RETRY
MOVEM A,CDPTRY ;REINITIALIZE RETRY COUNT
SVEOC1: CONO CDP,CO.CDR!CO.CEO!CO.PON+CDPLVL
JRST CDPXIT
;WE HAVE HAD A DATA REQUEST WITH NO DATA IN AN OUTPUT BUFFER.
;IF <EJECT> IS ON WE SHOULD JUST EJECT THE CARD WE JUST FINISHED.
; IF WE ARE EJECTING A CARD WITH ALL 80 COLUMNS PUNCHED WE
; MUST GO DIRECTLY TO THE E-O-C PROCESSING BECAUSE WE WILL
; GET NO END OF CARD INTERRUPT.
;IF THERE IS NO BUFFER READY TO GO JUST SHUT DOWN THE PUNCH. WHEN DMPBUF
; HAS ANOTHER READY IT WILL RESTART THE PUNCH AND SET <START>.
;<START> IS SET BY DMPBUF WHEN IT IS STARTING THINGS GOING AND BY THE
; END OF CARD PROCESSING. IF WE HAVE AN EMPTY BUFFER AND A DATA
; REQUEST INTERRUPT BUT <START> IS NOT SET WE HAVE A PROBLEM.
; WHEN PUNCHING THE LAST CARD IN THE HOPPER THE EJECT IS SOME
; (BUT NOT ALL!) TIMES IGNORED AND DATA REQUESTS CONTINUE. IT
; IS NOT KNOWN BY THIS WRITER (KTP) IF THIS IS A CP20 BUG OR
; FEATURE. THE <START> FLAG ATTEMPTS TO PROCEED WITH A REFILLED
; HOPPER REGARDLESS.
CDPSV2: TQZ <CDPERR> ;WE HAVE NO ERROR AND ARE STARTING A NEW CARD
;CDPERR SET BY SVERP, USED BY CDPCHK&SVEOC
TQNE <EJECT> ;WAS A CARD JUST COMPLETED?
JRST [ TQZ <EJECT> ;YES, EJECT IT
CONO CDP,CO.EJT!CO.CEO!CO.CDR+CDPLVL
TQZE <COL80> ;CARDS WITH ALL 80 COLUMNS PUNCHED
JRST SVEOC ;ARE NOT THE SAME AS OTHERS!
JRST CDPXIT] ;DON'T START NEW CARD YET
SKIPGE CDPCNT ;ANY FULL BUFFERS?
JRST [ CONO CDP,CO.INI ;NONE NOW, STOP PUNCH
TQNE <WNDF> ;BUFFER SET UP?
TQZ <CDPDUN> ;NO BUFFER, NO OUTPUT PENDING
JRST CDPXIT]
TQZN <START> ;DON'T START ANOTHER CARD UNTIL ONE IS FINISHED
JRST [ CONO CDP,CO.EJT!CO.CDR+CDPLVL
JRST CDPXIT]
MOVEI A,CDPBF1 ; GET PROPER BUFFER ADDRESS
TQCE <ALTI>
MOVEI A,CDPBF2
CDPSV3: MOVE B,CNTOFS(A) ;GET ITEM COUNT
CAIN B,^D80 ;CARDS WITH ALL 80 PUNCHED ARE
TQO <COL80> ; NOT THE SAME
MOVEM B,CDPITC
MOVE B,PNTOFS(A) ;GET BYTE POINTER
MOVEM B,CDPPTR
JRST CDPSV1 ;START BUFFER OUT
;HOPPER EMPTY/ STACKER FULL BIT COMES UP BEFORE LAST CARD IS FINISHED.
;SO IF THERE IS NO HARD ERROR WE WAIT FOR THE ITEM COUNT TO GO TO ZERO.
SVERP: SKIPLE CDPITC ;PRESENT BUFFER DONE?
JRST [ CONSZ CDP,CI.HRD ;NO, SEE IF ANY ERROR CAN'T WAIT
JRST .+1 ;TREAT ERROR NOW.
JRST CDPSV1] ;NO HARD ERROR, FINISH CARD
TQO <CDPERR> ;SET ERROR FLAG
CONO CDP,CO.RJT!CO.EJT!CO.CEO!CO.CDR ;REJECT BAD CARD AND CLEAR THINGS
SETZM CDPTIM ;ALERT CDPCHK. IT HANDLES ERROR ACTIONS
JRST CDPXIT
CDPCHK::MOVEM IOS,CDPSIO ;SAVE IOS
MOVE IOS,CDPSTS ;GET STATUS
MOVEI A,CPTIMV ;RESET CHECKING INTERVAL
MOVEM A,CDPTIM
TQNE <MOOL> ;ARE WE WAITING FOR OPR?
JRST [ CONSZ CDP,CI.NDE ;YES, STILL PROBLEMS?
JRST CHKXIT ;SOMETHING IS STILL WRONG
TQZ <MOOL> ;CLEAR HANDLER FLAG
TQO <MOCOL> ;UNIT ON-LINE
CALL PSICHK ;INTERRUPT REQUEST IF WANTED
TQNE <CDPERR> ;WAS THERE ALSO A DATA ERROR?
JRST DATERR ;YES, GO SEE ABOUT RETRIES
SOS CDPCNT ;COUNT LAST CARD
MOVEI A,RETRY ;RESET RETRY COUNT
MOVEM A,CDPTRY
TQZ <COL80,EJECT> ;WHAT THE LAST CARD WAS NO MORE MATTERS
TQO <START> ;TELL INT SERVICE TO ACT ON DATA REQUEST
CONO CDP,CO.GO ;GET PUNCH GOING AGAIN
JRST CHKXIT]
TQNN <CDPERR> ;WAS THERE AN ERROR DETECTED?
JRST CHKCPS ;NO ERROR, JUST DO STATUS CHECK
;ERROR SEEN BY INTERRUPT SERVICE, RETRY ON DATA ERROR
MOVE A,CDPCON ;GET HARDWARE BITS
TRNE A,CI.NDE ;ANY NON-DATA ERROR?
JRST CHKNDE ;PROCESS NON-DATA ERROR
DATERR: SOSL CDPTRY ;COUNT DOWN RETRIES
JRST [ CONSZ CDP,CI.CIP ;HAS BAD CARD CLEARED?
JRST CHKXIT ;NO, WAIT FOR NEXT CHECK TIME
TQC <ALTI> ;RECOMPLEMENT TO REUSE LAST BUFFER
SETZM CDPITC ;CLEAR ITEM COUNT FROM BAD CARD
TQZ <COL80,EJECT> ;DON'T WORRY ABOUT THE LAST CARD
TQO <START> ;TELL INT SERVICE TO ACT ON DATA REQ.
CONO CDP,CO.GO ;FIRE UP THE PUNCH
JRST CHKXIT] ;CLEAN UP AND GO
;FATAL ERROR WHEN RETRY COUNT EXHAUSTED
CPFERR: TQNN <NOMSG> ;NEED MESSAGE?
CALL CPMSG ;MESSAGE NEEDED
TQO <MOFER> ;REMEMBER FATAL ERROR IN CASE ASKED
MOVX A,.ICDAE ;SET INTERRUPT CHANNEL
MOVE B,CDPFRK ;GET FORK
CALL PSIRQ ;REQUEST INTERRUPT
CHKXIT: MOVEM IOS,CDPSTS ;SAVE STATUS
MOVE IOS,CDPSIO ;RESTORE IOS
RET
CHKNDE: TRNE A,CI.JAM ;JAMMED?
JRST CPFERR ;YES, CALL THAT FATAL
TRNN A,CI.ERR ;WAS THERE ALSO A DATA ERROR?
TQZ <CDPERR> ;NO, SO CLEAR FLAG SO THERE ARE NO RETRIES
;OPERATOR INTERVENTION NEEDED TO CONTINUE
TQNN <NOMSG> ;USER WANT MESSAGE?
CALL CPMSG ;YES
TQO <MOOL> ;FLAG OPERATOR WAIT
TQZ <MOCOL> ;CLEAR ON-LINE FLAG
CALL PSICHK ;REQUEST INTERRUPT IF NEEDED
JRST CHKXIT
;PUNCH STATUS TESTING, ONLINE/OFFLINE TRANSITIONS
CHKCPS: CONSZ CDP,CI.OFL ;OFF LINE NOW?
JRST [ TQNN <MOCOL> ;YES, WAS IT BEFORE?
JRST CHKXIT ;WAS OFF AND STILL IS.
TQZ <MOCOL> ;IT WAS ON, NOW OFF, CLEAR ON-LINE
TQO <MOOL> ;AND SET OFF-LINE
CALL PSICHK ;CHECK FOR INTERRUPT REQUESTED
JRST CHKXIT]
;NOW ON LINE
TQNE <MOCOL> ;WAS IT ON BEFORE?
JRST CHKXIT ;IT WAS ON AND STILL IS.
TQO <MOCOL> ;IT HAS GONE FROM OFF TO ON, SET ON-LINE
TQZ <MOOL> ;AND CLEAR OFF-LINE
CALL PSICHK ;GEN INTERRUPT IF REQUESTED
JRST CHKXIT
;GENERATE SOFTWARE INTERRUPT REQUEST IF USER WANTS IT
PSICHK: TQNN <PSION> ;DID USER ASK FOR INTERRUPTS?
RET ;NONE REQUESTED
MOVE A,CDPSIC ;GET SOFTWARE CHANNEL
MOVE B,CDPFRK ;USER FORK
CALL PSIRQ ;REQUEST INTERRUPT
RET
;TROUBLE MESSAGE OUTPUT
CPMSG: HRROI A,PRBDEV ;[7193]GET THE MESSAGE
CALL PMES ;(A)[7193] PRINT IT ON THE CTY
HRROI A,[ASCIZ/PCDP0/] ;[7193]DEVICE NAME
CALL PMES ;(A)[7193] TROUBLE MESSAGE OUT
HRROI A,CRLF ;[7193]ADD CRLF
CALL PMES ;(A)[7193] TO OUTPUT
RET
;ROUTINE TO CHECK FOR A FREE BUFFER
CDPTST: SKIPLE CDPCNT ;ANY BUFFER FREE YET?
JRST 0(4) ;NO
JRST 1(4) ;YES, WAKE PROCESS
;ROUTINE TO WAIT FOR LAST BUFFER
CDPFIN: SKIPL CDPCNT ;ALL BUFFERS FREE?
JRST 0(4) ;NO
JRST 1(4) ;YES, WAKE UP
TNXEND
END