Trailing-Edge
-
PDP-10 Archives
-
bb-m780d-sm
-
monitor-sources/dnadll.mac
There are 20 other files named dnadll.mac in the archive. Click here to see a list.
; UPD ID= 8505, RIP:<7.MONITOR>DNADLL.MAC.2, 9-Feb-88 14:54:59 by GSCOTT
;TCO 7.1218 - Update copyright notice.
; UPD ID= 2261, SNARK:<6.1.MONITOR>DNADLL.MAC.90, 21-Jun-85 11:41:29 by PALMIERI
;Clear UNPTR flag in UN block NIFOPN
; UPD ID= 2241, SNARK:<6.1.MONITOR>DNADLL.MAC.89, 19-Jun-85 14:11:58 by PALMIERI
;TCO 6.1.1457 Make variable EVSDRP in STG determine if endnodes enable
;for "all routers" multicast ID. If EVSDRP=0 then no "maybe" reachable
;is available to Router for INFO DECnet.
; UPD ID= 2213, SNARK:<6.1.MONITOR>DNADLL.MAC.88, 11-Jun-85 13:55:00 by PALMIERI
;TCO 6.1.1434 Include Ethernet source and destination address in event data for
;event 5.15. Include TDR for event 5.14.
;TCO 6.1.1432 Fix bug in CHKADR that was incorrectly reseting AC UN.
; UPD ID= 2066, SNARK:<6.1.MONITOR>DNADLL.MAC.86, 3-Jun-85 14:31:22 by MCCOLLUM
;TCO 6.1.1406 - Update copyright notice.
; UPD ID= 2010, SNARK:<6.1.MONITOR>DNADLL.MAC.85, 24-May-85 15:11:15 by PALMIERI
;TCO 6.1.1408 Don't attempt to open an Ethernet DECnet portal if the physical
; address is not DECnet's
; UPD ID= 1874, SNARK:<6.1.MONITOR>DNADLL.MAC.84, 4-May-85 11:45:12 by MCCOLLUM
;TCO 6.1.1238 - Fix more BUG. documentation
; UPD ID= 1834, SNARK:<6.1.MONITOR>DNADLL.MAC.83, 26-Apr-85 10:03:11 by MCCOLLUM
;TCO 6.1.1238 - Fix BUG. documentation
; UPD ID= 1726, SNARK:<6.1.MONITOR>DNADLL.MAC.82, 8-Apr-85 12:48:46 by MCCOLLUM
;TCO 6.1.1238 - Fix BUG. documentation
; UPD ID= 1647, SNARK:<6.1.MONITOR>DNADLL.MAC.81, 18-Mar-85 14:54:53 by PALMIERI
;Always post buffers when DTE line comes up
; UPD ID= 1629, SNARK:<6.1.MONITOR>DNADLL.MAC.80, 13-Mar-85 14:57:51 by PALMIERI
;Don't reserve emergency buffers until Router has blessed the circuit
;Clean up for and add table of contents
; UPD ID= 1546, SNARK:<6.1.MONITOR>DNADLL.MAC.79, 20-Feb-85 14:24:50 by PALMIERI
;TCO 6.1.1215 - Make DNDINQ global for LV8CHK - Remove queue empty check at
; DNDJIF. It is now in STG at LV8CHK. Don't give DNDNNF bugchk when things
; succeed.
; UPD ID= 1525, SNARK:<6.1.MONITOR>DNADLL.MAC.78, 14-Feb-85 01:53:45 by GROSSMAN
;Remove extra line after DNDRLF BUG.
; UPD ID= 1520, SNARK:<6.1.MONITOR>DNADLL.MAC.77, 13-Feb-85 17:35:27 by PALMIERI
;Add some BUG.s
;Re-work the way emergency buffer are managed. Reserve them here instead of
;in Router.
;Implement alternate queue block which avoids repeated PIOFF/PION when emptying
;queue to Router at LV8CHK/JIFFY time.
;Document some BUG.s
;TCO 6.1.1193 - LV8CHK now knows that DNDJIF is in XCDSEC
; UPD ID= 1485, SNARK:<6.1.MONITOR>DNADLL.MAC.76, 6-Feb-85 22:00:57 by PALMIERI
;Check for empty queue when entering DNDJIF before doing anything
; UPD ID= 1346, SNARK:<6.1.MONITOR>DNADLL.MAC.75, 16-Jan-85 11:35:33 by GLINDELL
;Remove TSTS6 tests
; UPD ID= 1327, SNARK:<6.1.MONITOR>DNADLL.MAC.74, 14-Jan-85 16:03:06 by PALMIERI
;Make attempt to set DTE line state return an error (operation failure)
; UPD ID= 1302, SNARK:<6.1.MONITOR>DNADLL.MAC.73, 10-Jan-85 16:50:29 by MOSER
;REMOVE TAB BEFORE CONTROL-L SO BUGS.MAC GENERATOR CAN RUN
; UPD ID= 1289, SNARK:<6.1.MONITOR>DNADLL.MAC.72, 8-Jan-85 18:08:51 by PALMIERI
;Add BUGCHKs if errors on Enable Multicast or Queue Message to NI fails
; UPD ID= 1286, SNARK:<6.1.MONITOR>DNADLL.MAC.71, 8-Jan-85 13:44:30 by PALMIERI
;Don't post buffers at NIIRCI unless Router is using the line
; UPD ID= 1262, SNARK:<6.1.MONITOR>DNADLL.MAC.70, 3-Jan-85 21:19:05 by PALMIERI
;Remove section 6 testing at DNDJIF
; UPD ID= 1258, SNARK:<6.1.MONITOR>DNADLL.MAC.69, 2-Jan-85 15:56:47 by PALMIERI
;Change DNDTIC TO DNDJIF
; UPD ID= 1193, SNARK:<6.1.MONITOR>DNADLL.MAC.68, 12-Dec-84 11:29:44 by PALMIERI
;Fix bit mapped counter bits to agree with network management - NLCTAB+
; UPD ID= 1173, SNARK:<6.1.MONITOR>DNADLL.MAC.67, 10-Dec-84 18:11:39 by PALMIERI
;Fix receive error event code for "frame too long"
; UPD ID= 1157, SNARK:<6.1.MONITOR>DNADLL.MAC.66, 5-Dec-84 17:27:48 by GLINDELL
;Remove unnecessary intra-section transfers
; UPD ID= 1117, SNARK:<6.1.MONITOR>DNADLL.MAC.65, 20-Nov-84 17:21:58 by PALMIERI
;Fix handling of NIA20 physical address change
; UPD ID= 1073, SNARK:<6.1.MONITOR>DNADLL.MAC.64, 14-Nov-84 13:33:59 by GLINDELL
;Fix IFIW's
; UPD ID= 1029, SNARK:<6.1.MONITOR>DNADLL.MAC.63, 12-Nov-84 14:47:21 by PALMIERI
;Initialize event communication block
; UPD ID= 1009, SNARK:<6.1.MONITOR>DNADLL.MAC.62, 8-Nov-84 14:30:52 by PALMIERI
;Fix bug at NIEVN2
; UPD ID= 989, SNARK:<6.1.MONITOR>DNADLL.MAC.61, 7-Nov-84 13:10:55 by PALMIERI
;Add support for large buffers, fix event logging
; UPD ID= 897, SNARK:<6.1.MONITOR>DNADLL.MAC.60, 18-Oct-84 13:31:25 by PALMIERI
;Fix error return to NTMAN at DNDCET+
; UPD ID= 894, SNARK:<6.1.MONITOR>DNADLL.MAC.59, 17-Oct-84 16:07:53 by PALMIERI
;Fix NMXSAL
; UPD ID= 889, SNARK:<6.1.MONITOR>DNADLL.MAC.58, 17-Oct-84 13:19:53 by PALMIERI
;Change RNMXOK to RNMXND
;Default the line state in the LINTBL
; UPD ID= 882, SNARK:<6.1.MONITOR>DNADLL.MAC.57, 15-Oct-84 16:32:41 by PALMIERI
;Replace hard coded value for RNT.NR with sysbol now that all module are in
;sync
; UPD ID= 878, SNARK:<6.1.MONITOR>DNADLL.MAC.56, 12-Oct-84 14:10:30 by PALMIERI
;Network management SLZ fixes
; UPD ID= 861, SNARK:<6.1.MONITOR>DNADLL.MAC.55, 10-Oct-84 16:08:33 by PALMIERI
;Make dispatch table handle DMRs
;Move to extended section, add queues for UN blocks and QB blocks
; UPD ID= 836, SLICE:<6.1.MONITOR>DNADLL.MAC.48, 27-Sep-84 13:24:07 by PALMIERI
;Fix line state on close to DTE
; UPD ID= 827, SLICE:<6.1.MONITOR>DNADLL.MAC.47, 26-Sep-84 10:13:42 by PALMIERI
;Fix DNDCET I just broke
; UPD ID= 826, SLICE:<6.1.MONITOR>DNADLL.MAC.46, 25-Sep-84 17:58:37 by PALMIERI
;Make DNDCET deal with lines and circuits both
; UPD ID= 796, SNARK:<6.1.MONITOR>DNADLL.MAC.45, 12-Sep-84 12:15:24 by PALMIERI
;Add missing "RESCD" so code which must be resident is.
; UPD ID= 792, SNARK:<6.1.MONITOR>DNADLL.MAC.44, 10-Sep-84 15:05:09 by PALMIERI
;Save a permanent AC at DNDSEC that was being smashed
;Fix sense of run bit testing on Read Channel Info callback from NISRV
; UPD ID= 775, SNARK:<6.1.MONITOR>DNADLL.MAC.43, 31-Aug-84 13:46:29 by PALMIERI
;Network management fixes
; UPD ID= 718, SNARK:<6.1.MONITOR>DNADLL.MAC.42, 27-Jul-84 16:02:24 by GROSSMAN
;Use D36COM routines to play with MDPTR instead of doing it directly.
; UPD ID= 689, SNARK:<6.1.MONITOR>DNADLL.MAC.41, 16-Jul-84 17:00:01 by PALMIERI
;Set up DL for parameter functions for DTE and NI
; UPD ID= 680, SNARK:<6.1.MONITOR>DNADLL.MAC.40, 12-Jul-84 18:00:37 by HALPIN
;This time REALLY remove all references to NF.REX!!!!!!!
;
; UPD ID= 679, SNARK:<6.1.MONITOR>DNADLL.MAC.39, 12-Jul-84 17:41:36 by HALPIN
;Remove references to NF.REX Network Management Function call
;Put PABEX (Buffer EXpected) Flag in the NI Hardware Address PARAMETER
; macro.
;Fixed bugs in DNDNMF, Relating to the NFWBLK Selector (KNOWN, ADJACENT,...)
; field
;Add BEX for Ethernet address
; UPD ID= 672, SNARK:<6.1.MONITOR>DNADLL.MAC.38, 9-Jul-84 12:23:21 by PALMIERI
;Fix lost TRN in DNDINI
; UPD ID= 671, SNARK:<6.1.MONITOR>DNADLL.MAC.37, 6-Jul-84 18:07:36 by PALMIERI
;Add NTMAN interface
;Elective endnode
; UPD ID= 635, SNARK:<6.1.MONITOR>DNADLL.MAC.36, 20-Jun-84 16:21:44 by PALMIERI
;When reading NI channel list don't expect T2 to point to UN block on return
; UPD ID= 632, SNARK:<6.1.MONITOR>DNADLL.MAC.35, 18-Jun-84 18:21:17 by PALMIERI
;Check count of channels found at NIDINI
; UPD ID= 628, SNARK:<6.1.MONITOR>DNADLL.MAC.34, 18-Jun-84 13:32:35 by PALMIERI
;Check callback ID at DTIPPI
; UPD ID= 627, SNARK:<6.1.MONITOR>DNADLL.MAC.33, 18-Jun-84 09:53:52 by PALMIERI
;Fix typo at DTIPRB+1
; UPD ID= 624, SNARK:<6.1.MONITOR>DNADLL.MAC.31, 14-Jun-84 21:08:56 by PALMIERI
;Move DL BEGSTR to D36PAR for DCNSPY usage
;We no longer need to set the DECnet address for the Ethernet (SETSPD does it)
; UPD ID= 605, SNARK:<6.1.MONITOR>DNADLL.MAC.30, 6-Jun-84 14:59:09 by GLINDELL
;DF.COU changed to DF.SHC
; UPD ID= 598, SNARK:<6.1.MONITOR>DNADLL.MAC.29, 6-Jun-84 11:37:27 by PALMIERI
;NIIRCE broken by commented out instruction
; UPD ID= 595, SNARK:<6.1.MONITOR>DNADLL.MAC.28, 4-Jun-84 15:23:53 by PALMIERI
;Add in overhead when computing buffer size requiremnts for Ethernet buffers
; UPD ID= 592, SNARK:<6.1.MONITOR>DNADLL.MAC.27, 1-Jun-84 18:23:46 by PALMIERI
;Account for buffer returned on a close from DTESRV
; UPD ID= 584, SNARK:<6.1.MONITOR>DNADLL.MAC.26, 31-May-84 15:25:03 by PALMIERI
;Don't release DLB at NIFNOF: - Fix this stuff later
; UPD ID= 569, SNARK:<6.1.MONITOR>DNADLL.MAC.23, 25-May-84 16:25:07 by PALMIERI
;Remove references to %RTBSW
; UPD ID= 562, SNARK:<6.1.MONITOR>DNADLL.MAC.22, 24-May-84 15:50:32 by PALMIERI
;Check the RUN bit now that NISRV is changed
; UPD ID= 550, SNARK:<6.1.MONITOR>DNADLL.MAC.20, 23-May-84 21:38:33 by PALMIERI
;Never post more than 1 buffer to DTESRV, return buffer on close
; UPD ID= 537, SNARK:<6.1.MONITOR>DNADLL.MAC.18, 21-May-84 17:49:31 by PALMIERI
;Don't post any buffers for any error at NIIRCE (Temp till NISRV fixed)
; UPD ID= 530, SNARK:<6.1.MONITOR>DNADLL.MAC.17, 20-May-84 20:39:36 by PALMIERI
;Fix once per second code for DTE and add UNRUN check for NI
; UPD ID= 522, SNARK:<6.1.MONITOR>DNADLL.MAC.16, 14-May-84 13:59:34 by PALMIERI
;Fix NI callback dispatch table
; UPD ID= 509, SNARK:<6.1.MONITOR>DNADLL.MAC.15, 7-May-84 17:43:09 by PALMIERI
;Move circuit counters maintained by the line to DNADLL
; UPD ID= 485, SNARK:<6.1.MONITOR>DNADLL.MAC.14, 30-Apr-84 13:10:37 by PALMIERI
;Replace PION/PIOFF with SYSPIF/SYSPIN
;Interface to the new Ethernet driver (NISRV)
;Bring DNADLL up to the level descibed in the spec
; UPD ID= 407, SNARK:<6.1.MONITOR>DNADLL.MAC.11, 26-Mar-84 16:08:07 by PALMIERI
;DLUID not always set
; UPD ID= 405, SNARK:<6.1.MONITOR>DNADLL.MAC.10, 22-Mar-84 14:25:07 by PALMIERI
;Be sure UN is set up when calling PSTBUF from DNDSEC
; UPD ID= 398, SNARK:<6.1.MONITOR>DNADLL.MAC.8, 20-Mar-84 01:08:18 by GROSSMAN
;Fix typo which crashes monitor.
; UPD ID= 392, SNARK:<6.1.MONITOR>DNADLL.MAC.7, 19-Mar-84 15:54:37 by PALMIERI
;Add some small support for CIDDL and add once per second routine
; UPD ID= 375, SNARK:<6.1.MONITOR>DNADLL.MAC.5, 8-Mar-84 18:01:10 by PALMIERI
; %RTBSW is defined in D36COM, declare it external
; UPD ID= 371, SNARK:<6.1.MONITOR>DNADLL.MAC.4, 5-Mar-84 15:33:25 by GROSSMAN
;Use correct buffer size for Ethernet
; UPD ID= 358, SNARK:<6.1.MONITOR>DNADLL.MAC.3, 27-Feb-84 15:50:17 by PALMIERI
;Fix error return from DNDPRB
; UPD ID= 343, SNARK:<6.1.MONITOR>DNADLL.MAC.2, 24-Feb-84 13:22:24 by PALMIERI
;TITLE DNADLL - DLL use interface for DECnet-36 V000
; COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1985, 1988.
; ALL RIGHTS RESERVED.
;
; THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
; ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
; INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
; COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
; OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
; TRANSFERRED.
;
; THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
; AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
; CORPORATION.
;
; DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
; SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
SUBTTL Marty Palmieri 6 March 85
SEARCH NIPAR,D36PAR,MACSYM
SALL
ENTRY DNDINI
XP DNADLL,000
IFN FTOPS20,<
SEARCH PROLOG
TTITLE DNADLL,,< - DLL interface for DECnet-36>
>
IFN FTOPS10,<
SEARCH F,S
TITLE DNADLL - DLL interface for DECnet-36
>;END OF IFN FTOPS10
D36SYM ;SET UP D36 SPECIFIC PARAMETERS
IFN FTOPS10,<$RELOC>
XRESCD ;RELOC TO HIGHSEG (RSCOD PSECT ON TOPS-20)
Subttl Table of Contents
; Table of Contents for DNADLL
;
; Section Page
;
;
; 1. Definitions
; 1.1 External References . . . . . . . . . . . . . 5
; 1.2 Accumulators . . . . . . . . . . . . . . . . . 7
; 1.3 BEGSTRs . . . . . . . . . . . . . . . . . . . 8
; 1.4 Line tables . . . . . . . . . . . . . . . . . 9
; 2. Network management
; 2.1 Line counter tables . . . . . . . . . . . . . 10
; 2.2 Ethernet line counter tables . . . . . . . . . 11
; 2.3 Line parameters (DTE) . . . . . . . . . . . . 12
; 2.4 Line parameters (Ethernet) . . . . . . . . . . 13
; 3. DNDINI - Initialize Router's common DLL interface . . 14
; 4. Ckeck entity - Build DLL database . . . . . . . . . . 15
; 5. DNDGLB - Find a data link block . . . . . . . . . . . 16
; 6. DNDGLT - Find a line block . . . . . . . . . . . . . . 17
; 7. DNDQUE - Enter requests on input queue . . . . . . . . 18
; 8. DNDSEC - Entry from scheduler level each second . . . 19
; 9. DNDJIF - Entry from scheduler level to empty queues . 20
; 10. DNDDSP - Dispatch for calls from ROUTER . . . . . . . 21
; 11. Network management
; 11.1 Show known/active lines . . . . . . . . . . . 22
; 11.2 Show active lines . . . . . . . . . . . . . . 23
; 12. DCIDSP - Dispatch routine for calls to CIDLL . . . . . 24
; 13. DTEDLL
; 13.1 DTE data link layer . . . . . . . . . . . . . 25
; 13.2 Dispatch from Router or Network Management . . 26
; 13.3 Open a port . . . . . . . . . . . . . . . . . 27
; 13.4 Transmit a packet . . . . . . . . . . . . . . 28
; 13.5 Close a port . . . . . . . . . . . . . . . . . 29
; 13.6 Network management - Parameter functions . . . 30
; 13.7 Network Management - Show/Show and zero counte 31
; 13.8 Network management - Return list . . . . . . . 32
; 13.9 DTESRV interrupt level callbacks . . . . . . . 33
; 13.10 Transmit complete from DTESRV . . . . . . . . 34
; 13.11 Receive complete from DTESRV . . . . . . . . . 35
; 13.12 Post receive buffer for DTESRV . . . . . . . . 36
; 13.13 Line state change callback . . . . . . . . . . 37
; 14. NIDLL - Ethernet DLL interface . . . . . . . . . . . . 38
Subttl Table of Contents (page 2)
; Table of Contents for DNADLL
;
; Section Page
;
;
; 15. NIDLL
; 15.1 Once per second routine . . . . . . . . . . . 39
; 15.2 Dispatch for calls from Router or Network Mana 40
; 15.3 Open portal . . . . . . . . . . . . . . . . . 41
; 15.4 Close an ethernet protal . . . . . . . . . . . 42
; 15.5 Send a packet on the wire . . . . . . . . . . 43
; 15.6 Network management - Show /Show and zero count 45
; 15.7 Calls for illegal functions . . . . . . . . . 46
; 15.8 Network management - Read portal counters . . 47
; 15.9 Network management - Read channel counters . . 48
; 15.10 Network management - Read Ethernet addreses . 49
; 15.11 Network management - Read channel information 50
; 15.12 Network management - Read counters interlock . 51
; 15.13 Set the DECnet address in the channel . . . . 52
; 15.14 Post buffers for the NIDLL . . . . . . . . . . 53
; 15.15 Enable multicast address . . . . . . . . . . . 54
; 15.16 Get informational portal ID . . . . . . . . . 55
; 15.17 Close the information portal . . . . . . . . . 56
; 15.18 Interrupt level callbacks from NISRV . . . . . 57
; 15.19 Close complete callback . . . . . . . . . . . 58
; 15.20 Input complete . . . . . . . . . . . . . . . . 59
; 15.21 Transmit done . . . . . . . . . . . . . . . . 60
; 15.22 Read portal counters complete . . . . . . . . 61
; 15.23 Channel state change callback (line state chan 62
; 15.24 Set channel address callback . . . . . . . . . 63
; 15.25 Read channel counters callback . . . . . . . . 64
; 15.26 Set channel state callback . . . . . . . . . . 65
; 15.27 Ethernet event reporter . . . . . . . . . . . 66
; 16. Network Management Interface
; 16.1 RTNEVT - Event Reporter . . . . . . . . . . . 67
; 16.2 RTNEVT - Event data routines . . . . . . . . . 69
; 16.3 RTNEVT - Event data routines . . . . . . . . . 70
; 17. Miscellaneous routines
; 17.1 Get a UN block . . . . . . . . . . . . . . . . 71
; 17.2 Get emergency buffer . . . . . . . . . . . . . 72
; 17.3 Check Ethernet address . . . . . . . . . . . . 73
; 18. Local storage for DNADLL . . . . . . . . . . . . . . . 74
; 19. End of DNADLL . . . . . . . . . . . . . . . . . . . . 75
SUBTTL Definitions -- External References
;These are the external references to the D36COM library of routines.
EXT DNGMSG ;GET DECNET-36 MESSAGE BLOCK
EXT DNFMSG ;FREE MESSAGE BLOCK
EXT DNGEMS ;GET EMERGENCY MESSAGE BLOCK
EXT DNGEBF ;Reserve emergency buffers
EXT DNGWDS ;GET SOME WORDS
EXT DNGWDZ ;GET SOME ZEROED WORDS
EXT DNFWDS ;FREE SOME WORDS
EXT DNSWDS ;SMEAR SOME WORDS
EXT UPDTCK ; Updated DNGTIM
EXT DNGTIM ;RETURN CURRENT UPTIME (IN MS)
EXT NMXEVT ;NTMAN event processor
EXT NTPARM ;Common parameter routine
EXT NTCTRS ;Common counter routine
;These are the external references to D36COM data cells
EXT RTRHOM ;OUR HOME AREA
EXT RTRADR ;OUR NODE NUMBER
EXT RTRLOO ; Low order of DECnet address (string)
EXT MXLBSZ ;Maximum receive block size for a line
EXT IBBLK ;DECnet-36 initialization block
;These are the external references to ROUTER
EXT RTRPRO ;ROUTER'S PROTOCOL TYPE
EXT RTRDLE ; Entry into ROUTER from dnadll
EXT RTRCOP
EXT TSTBLK
;These are some default parameters
EXT %RTHIO ;HI PART OF THE NI ADDRESS
EXT %RTHOM ;HOME AREA FOR THIS NODE
EXT %RTRMA ;MULTICAST ID "ALL ROUTERS"
EXT %RTEMA ;Multicast ID "All endnodes"
EXT %RTBSZ
EXT %RTEHS ;Size in bytes of Ethernet header
;These are the external references to NIDLL
EXT DLLUNI
;These are the external references to CIDLL
EXT CININI ;CIDLL initialization routine
EXT CINDSP ;CIDLL dispatch routine
EXT CINSEC ;CIDLL once a second
;Other external references
EXT EVSDRP ;STG
EXT RTN ;NON-SKIP RETURN
EXT RSKP ;SKIP RETURN
;Interlock management
IFN FTOPS10,<
EXT .CPCPN ;CURRENT CPU NUMBER
EXT .CPSK0 ;SKIP IF CURRENT CPU IS BOOT CPU
>
SUBTTL Definitions -- Accumulators
;These are some local AC defintions for DNADLL
DL=FREE1 ;DL usually points to the data link block
LT=FREE2 ;LT contains pointer to line table entry
UN=MS ;UN is the NI user block
PURGE FREE1 ; Lose this symbol
PURGE FREE2 ; and this one
;Some local symbols
NOSET==PANST ;From BEGSTR in D36PAR
NOCLR==PANCL
BEX==PABEX
DN.NDR==1B0 ; Is not processed by specific DLL
DN.NMF==1B1 ; Network management function
SUBTTL Definitions -- BEGSTRs
BEGSTR QB
WORD NXT, ; Pointer to next request in queue
HWORD FCN, ; Function requested
WORD DA1, ; Function specific data
WORD DA2, ; Additional data
WORD DLB ; Associated data link block address
ENDSTR
;Line table structure
BEGSTR LT
WORD LID ; Line ID
FIELD FLG,2 ; Flags
BIT DVE ; Driver believes device is present
BIT CAD ; Channel address is DECnet (Ethernet only)
FIELD STA,2 ; State of line
FIELD CON,2 ; Controller (normal/loopback)
FIELD PRO,6 ; Protocol type
FIELD CTY,6 ; Circuit type
FIELD DBF,6 ; Default number of buffers
FIELD BSZ,12 ; Maximum receive buffer size on this line
HWORD BNO ; Number of buffers to post
HWORD NBP ; Number of buffers posted
ENDSTR
SUBTTL Definitions -- Line tables
RESDT
;Table of maximum line configuration supported by TOPS-20
DEFINE LINCFG(TYPE,STATE,CPU,UNIT,PROT,CTYPE,NBUF),<
EXP <FLD(1,LILXC)>!<FLD(LD.'TYPE,LIDEV)>!<FLD(CPU,LIKON)>!<FLD(UNIT,LIUNI)>
EXP <FLD(0,LTDVE)>!<FLD(STATE,LTSTA)>!<FLD(0,LTCON)>!<FLD(^D<PROT>,LTPRO)>!<FLD(^D<CTYPE>,LTCTY)>!<FLD(^D<NBUF>,LTDBF)>!<FLD(%RTBSZ,LTBSZ)>
EXP <FLD(0,LTBNO)>!<FLD(0,LTNBP)>
LNTBLL==<<.-LINTBL>/LT.LEN>
>
LINTBL: LINCFG (NI,LS.ON,0,0,6,6,6)
LINCFG (CIP,LS.ON,0,0,7,7,1)
LINCFG (DTE,LS.OFF,0,1,8,8,1)
LINCFG (DTE,LS.OFF,0,2,8,8,1)
LINCFG (DTE,LS.OFF,0,3,8,8,1)
SUBTTL Network management -- Line counter tables
XSWAPCD
;Circuit counters maintained by the line
CICTAB:
COUNTER (^D1000,^D32,<LOAD T1,DLBYR,(DL)>,<SETZRO DLBYR,(DL)>,,<
Bytes received>)
COUNTER (^D1001,^D32,<LOAD T1,DLBYS,(DL)>,<SETZRO DLBYS,(DL)>,,<Bytes sent>)
COUNTER (^D1010,^D32,<LOAD T1,DLDBR,(DL)>,<SETZRO DLDBR,(DL)>,,<
Data blocks received>)
COUNTER (^D1011,^D32,<LOAD T1,DLDBS,(DL)>,<SETZRO DLDBS,(DL)>,,<
Data blocks sent>)
COUNTER (^D1065,^D16,<LOAD T1,DLUBU,(DL)>,<SETZRO DLUBU,(DL)>,,<
Use buffer unavailable>)
CICTBL==.-CICTAB
SUBTTL Network management -- Ethernet line counter tables
NLCTAB:
COUNTER (^D0,^D16,<LOAD T1,CCSLZ,(P2)>,,,<Seconds since last zeroed>)
COUNTER (^D1000,^D32,<LOAD T1,CCBYR,(P2)>,,,<Bytes received>)
COUNTER (^D1001,^D32,<LOAD T1,CCBYS,(P2)>,,,<Bytes sent>)
COUNTER (^D1002,^D32,<LOAD T1,CCMBR,(P2)>,,,<Multicast bytes received>)
COUNTER (^D1010,^D32,<LOAD T1,CCDGR,(P2)>,,,<Data blocks received>)
COUNTER (^D1011,^D32,<LOAD T1,CCDGS,(P2)>,,,<Data blocks sent>)
COUNTER (^D1012,^D32,<LOAD T1,CCMDR,(P2)>,,,<
Multicast data blocks received>)
COUNTER (^D1013,^D32,<LOAD T1,CCDSD,(P2)>,,,<
Data blocks sent, initially deferred>)
COUNTER (^D1014,^D32,<LOAD T1,CCDS1,(P2)>,,,<
Data blocks sent, single collision>)
COUNTER (^D1015,^D32,<LOAD T1,CCDSM,(P2)>,,,<
Data blocks sent multiple collisions>)
COUNTER (^D1060,^D16,<LOAD T1,CCSF,(P2)>,,<CALL [LOAD T1,CCSFM,(P2)
LSH T1,-4
RET ]>,<Send failures>)
COUNTER (^D1062,^D16,<LOAD T1,CCRF,(P2)>,,<CALL [LOAD T1,CCRFM,(P2)
LSH T1,-4
RET ]>,<Receive failures>)
COUNTER (^D1063,^D16,<LOAD T1,CCUFD,(P2)>,,,<Unrecognized frame destination>)
COUNTER (^D1064,^D16,<LOAD T1,CCDOV,(P2)>,,,<Data overrun>)
COUNTER (^D1065,^D16,<LOAD T1,CCSBU,(P2)>,,,<System buffer unavailable>)
COUNTER (^D1066,^D16,<LOAD T1,CCUBU,(P2)>,,,<User buffer unavailable>)
NLCTBL==.-NLCTAB
;Ethenet portal counters
NCCTAB:
COUNTER (^D1000,^D32,<LOAD T1,PCBYR,(P2)>,,,<Bytes received>)
COUNTER (^D1001,^D32,<LOAD T1,PCBYS,(P2)>,,,<Bytes sent>)
COUNTER (^D1010,^D32,<LOAD T1,PCDGR,(P2)>,,,<Data blocks received>)
COUNTER (^D1011,^D32,<LOAD T1,PCDGS,(P2)>,,,<Data blocks sent>)
COUNTER (^D1065,^D16,<LOAD T1,PCUBU,(P2)>,,,<Use buffer unavailable>)
NCCTBL==.-NCCTAB
SUBTTL Network management -- Line parameters (DTE)
DLPTAB:
PARAMETER (^D0,<NOSET!NOCLR>,,,,,<LOAD T2,LTSTA,(LT)>,,<Line state>)
PARAMETER (^D1105,,^D20,^D5,^D10,<STOR T2,LTBNO,(LT)>,<LOAD T2,LTBNO,(LT)>,<
STOR T2,LTBNO,(LT)>,<Receive buffers>)
PARAMETER(^D1110,<NOSET!NOCLR>,,,,<TRN>,<LOAD T2,LTCON,(LT)>,<TRN>,<
Controller>)
PARAMETER(^D1112,<NOSET!NOCLR>,,,,<TRN>,<LOAD T2,LTPRO,(LT)>,<TRN>,<
Protocol>)
PARAMETER(^D2500,<NOSET!NOCLR>,,,,<TRN>,<LOAD T2,LTBSZ,(LT)>,<TRN>,<
Receive buffer size>)
DLPTBL==.-DLPTAB
DCPTAB:
PARAMETER (^D1112,<NOSET!NOCLR>,,,,<TRN>,<LOAD T2,LTCTY,(LT)>,<TRN>,<
Circuit type>)
DCPTBL==.-DCPTAB
SUBTTL Network management -- Line parameters (Ethernet)
NLPTAB:
PARAMETER (^D0,<NOSET!NOCLR>,,,,,<LOAD T2,LTSTA,(LT)>,,<Line state>)
PARAMETER (^D1105,,^D20,^D5,^D10,<STOR T2,LTBNO,(LT)>,<LOAD T2,LTBNO,(LT)>,<
STOR T2,LTBNO,(LT)>,<Receive buffers>) ; This works for all but CI
PARAMETER (^D1110,<NOSET!NOCLR>,,,,<TRN>,<LOAD T2,LTCON,(LT)>,<TRN>,<
Controller>)
PARAMETER (^D1112,<NOSET!NOCLR>,,,,<TRN>,<LOAD T2,LTPRO,(LT)>,<TRN>,<
Protocol>)
PARAMETER (^D1160,<NOSET!NOCLR!BEX>,,,,<TRN>,<CALL NMFRHA>,<TRN>,<
Hardware address>)
PARAMETER(^D2500,<NOSET!NOCLR>,,,,<TRN>,<LOAD T2,LTBSZ,(LT)>,<TRN>,<
Receive buffer size>)
NLPTBL==.-NLPTAB
NCPTAB:
PARAMETER (^D1112,<NOSET!NOCLR>,,,,<TRN>,<LOAD T2,LTCTY,(LT)>,<TRN>,<
Circuit type>)
NCPTBL==.-NCPTAB
SUBTTL Network management -- Node parameters (Ethernet)
NNPTAB:
PARAMETER (^D10,<NOSET!NOCLR!BEX>,,,,<TRN>,<CALL NMFRPA>,<TRN>,<
Physical address>)
NNPTBL==.-NNPTAB
XRESCD
SUBTTL DNDINI - Initialize Router's common DLL interface
;DNDINI - Initialize common DLL interface for Router
;
; Call:
; with nothing
;
; Return:
; RET ;Only return
;
; Uses: T1-T3
;
;This routine gets called at system initialization.
INTERNAL DNDINI
XSWAPCD
DNDINI: TRACE DND,<Initializing DNADLL>
SAVEAC <P1,P2,DL>
LOAD T1,IBRTR,+IBBLK ; Get Router type desired
MOVEM T1,DNDRNT ; Save as Router's node type
;Get and initialize an EC (Event Communication) block
MOVX T1,EV.GEC ;Function code "get EC block"
CALL NMXEVT
IFSKP.
MOVEM T1,DNDECP ;Save pointer
MOVX T2,4 ;DNADLL may queue 4 event blocks
STOR T2,ECMAX,(T1)
ENDIF.
XMOVEI T1,QUEBLK ; Initialize the queues
MOVEM T1,DNDINQ
ADDI T1,QH.LEN
MOVEM T1,DNDIWQ
;Now try to initialize all of the lines
MOVNI P1,LNTBLL ; Number of lines in table
HRLZ P1,P1
XMOVEI P2,LINTBL
DNDIN1: LOAD T1,LTLID,(P2) ; Line ID
LOAD T4,LIDEV,+T1 ; Get device type
MOVE T3,MXLBSZ(T4) ; Get the maximum allowable blocksize
OPSTR <CAML T3,>,IBBSZ,+IBBLK ; Is request for less?
LOAD T3,IBBSZ,+IBBLK ; Yes, then use that
STOR T3,LTBSZ,(P2) ; Remember what we selected
XMOVEI T2,DNDQUE ; Callback address for DLLs
CALL @DLLINI(T4) ; (T1,T2,T3) Try to initialize
IFSKP.
SETONE LTDVE,(P2) ; Indicate device exists
ENDIF.
ADDI P2,LT.LEN ; Step to next line
AOBJN P1,DNDIN1 ; Continue until all lines are intialized
RET
DLLINI: IFIW <RTN&777777>
IFIW <DTDINI&777777>
IFIW <RTN&777777>
IFIW <RTN&777777>
XCDSEC,,CININI
IFIW <NIDINI&777777>
XRESCD
SUBTTL Ckeck entity - Build DLL database
;DNDCET - Build data link blocks and circuit blocks if needed
;
; Call:
; T2/ NTMAN argument block
;
; Return:
; RET ;Only return
;
; Uses: T1-T3
;
;This routine is called by network management to cause DNADLL data link blocks
;and Router circuit blocks to be built.
XSWAPCD
DNDCET: SAVEAC <P1,P2,DL>
MOVE P1,T2 ; Save address of NTMAN function block
LOAD T1,NFEID,(P1) ; Get entity ID
TMNE LILXC,+T1 ; Is it a circuit?
IFSKP.
CALL DNDGLB ; (T1) No, see if we have a data link block
TRNA ; No, see if we should make one
RETSKP ; Got it, tell NTMAN o.k.
LOAD T1,NFEID,(P1) ; Get entity ID
TXO T1,LILXC ; Make this circuit entity into a line entity
ENDIF.
TXZ T1,LIDRP ; and clear any multi-drop numbers
CALL DNDGLT ; (T1) Get the line table for this line
RNMXER (NF.URC)
TMNN LTDVE,(T1) ; Does the line exist?
RNMXER (NF.URC) ; No, then don't create data link block
TMNE LILXC,+NF.EID(P1) ; Was the entity a line?
RETSKP ; Yes, return success
MOVE P2,T1 ; Keep line table address
MOVEI T1,DL.LEN ; Length of data link block
CALL DNGWDZ ; (T1) Allocate space
RNMXER (NF.RES) ; Error to NTMAN
MOVE DL,T1 ; Hold on to this address
LOAD T3,NFEID,(P1) ; Entity ID
STOR T3,DLDID,(DL) ; Device ID
STOR P2,DLLTP,(DL) ; Line table pointer
LOAD T1,LIUNI,+T3 ; Get unit number
STOR T1,DLKNO,(DL)
LOAD T1,LTDBF,(P2) ; Get default number of buffers
STOR T1,LTBNO,(P2) ; Number of buffers
MOVEI T1,DI.ICB ; Ask Router to initialize a circuit block
MOVE T2,DL ; Get DLB address in correct place
LOAD T4,LTBSZ,(P2) ; Tell the maximum block size for this line
CALL RTRDLE ; (T1,T2,T3,T4) Call Router now
SKIPE T1 ; T1 contains Router callback ID if successful
IFSKP. ; else 0
MOVE T1,DL
CALL DNFWDS ; Return the block
RNMXER (NF.URC)
ENDIF.
STOR T1,DLUID,(DL) ; Save circuit block address
ENDQUE DL,DLBQUE,DL.NXT,T2 ; Queue the data link block
MOVX T1,2 ; Get emergency buffers for this data link
CALL DNGEBF
BUG.(CHK,DNDCGE,DNADLL,SOFT,<Couldn't get emergency buffer for DLL>,,<
Cause: DNADLL requires that the memory manager save at least 2 buffers
per link for DNADLL; one for the routing messages ROUTER keeps for
each circuit and one to guarantee some level of route-through ability.
DNADLL was asked to open a data link, but the memory manager could
not guarantee the buffers.
Action: Allocate more memory or settle for fewer circuits.
>)
RETSKP
XRESCD
SUBTTL DNDGLB - Find a data link block
;DNDGLB - Search the queue for a Data Link Block
;
; Call:
; T1/ Line (device) ID
;
; Return:
; RET ;No Data Link Block for given ID
; RETSKP ;With DL = Data Link Block
;
; Uses: T1-T2
;
;This routine is used for calls from Network Management
XSWAPCD
DNDGLB: SETZRO LILXC,+T1 ; Clear "this is a line" indicator
SKIPN DL,DLBQUE ;Start looking at first data link block
RET ;None there, just return
DNDGL1: LOAD T2,DLDID,(DL) ;Get its' line ID
CAMN T1,T2 ;Is it the one we're looking for?
RETSKP ;Good return
LOAD DL,DLNXT,(DL) ;Get the next data link block
JUMPN DL,DNDGL1 ;Go check it out
RET ;Couldn't find it
XRESCD
SUBTTL DNDGLT - Find a line block
;DNDGLT - Search the line table for a specified line
;
; Call:
; T1/ Line (device) ID
;
; Return:
; RET ;No line not configuered into monitor
; RETSKP ;With T1 pointing to entry in LINTBL
;
; Uses: T1-T2
;
;This routine is used for calls from Network Management
XSWAPCD
DNDGLT: MOVE T2,T1 ; Copy line ID
XMOVEI T1,LINTBL ; Point to line table
MOVEI T4,LNTBLL ; Number of entries in table
DNDGT1: LOAD T3,LTLID,(T1) ; Get its' line ID
CAMN T2,T3 ; Is it the one we're looking for?
RETSKP ; Good return - T1 contains address
ADDI T1,LT.LEN ; Step to next entry
SOJG T4,DNDGT1
RET ; Couldn't find it
XRESCD
SUBTTL DNDQUE - Enter requests on input queue
;DNDQUE - Queue up interrupt level requests to scheduler level
;
; Call:
; T1 - Function to call ROUTER with (ie: DI.xxx)
; T2 - Callback ID (Data Link Block)
; T3 - Function specific data (Usually MB address)
; T4 - Additional function specific data (usually status)
;
; CALL DNDQUE
; only return
;
; Uses T1-T4.
;
DNDQUE: SAVEAC <DL,P1,Q1,Q2> ; Get a spare AC
MOVE P1,T1 ; Save function for a moment
MOVE DL,T2 ; Data link block
MOVE Q1,T3 ;
MOVE Q2,T4
SYSPIF
SKIPN T1,DNDQBQ ; Any free block on the QB queue?
IFSKP.
MOVE T2,(T1) ; Yes, then get one from it
MOVEM T2,DNDQBQ
SOS DNDQBL ; Account for it
ELSE.
MOVX T1,QB.LEN ; Get length of user NI block
CALL DNGWDZ ; Try to get the words
IFNSK. ; Couldn't
MOVE T1,Q1 ; Get address of possible message
CAIE P1,DI.ODN ; Is this a function for which we
CAIN P1,DI.INC ; expect a message block
CALL DNFMSG ; Yes, then free it
SYSPIN
RET ; No, just return
ENDIF.
ENDIF.
STOR P1,QBFCN,(T1) ; Store function
STOR DL,QBDLB,(T1) ; Save DLB pointer
STOR Q1,QBDA1,(T1) ; Store the data
STOR Q2,QBDA2,(T1)
MOVE P1,DNDINQ ; Queue to enqueue block to
ENDQUE T1,(P1),QB.NXT,T2 ; Queue the data link block
SYSPIN
RET
SUBTTL DNDSEC - Entry from scheduler level each second
INTERNAL DNDSEC
XRESCD
DNDSEC: SAVEAC <DL,LT> ; Check all data link blocks
SKIPA DL,DLBQUE
DNDSE1: LOAD DL,DLNXT,(DL)
JUMPE DL,CINSEC
LOAD LT,DLLTP,(DL) ; Get line table pointer
LOAD T1,DLDID,(DL) ; Get line ID
LOAD T1,LIDEV,+T1 ; Get device type
MOVE T1,SECTAB(T1) ; Get dispatch address
CALL (T1) ; Do devices once/second
JRST DNDSE1
SECTAB: IFIW <RTN&777777>
IFIW <DTDSEC&777777>
IFIW <RTN&777777>
IFIW <RTN&777777>
IFIW <RTN&777777>
IFIW <NIDSEC&777777>
IFIW <RTN&777777>
SUBTTL DNDJIF - Entry from scheduler level to empty queues
INTERNAL DNDJIF
XRESCD
DNDJIF: SAVEAC <P1,P2,DL>
MOVE P2,DNDIWQ ; Exchange the queue pointers so we
EXCH P2,DNDINQ ; don't have to worry about interrupts
DNDJF1: DEQUE P1,(P2),QB.NXT,DNDNOQ ; Get a function block from the queue
LOAD DL,QBDLB,(P1) ; DLB pointer
LOAD T1,QBFCN,(P1) ; Function
LOAD T2,DLUID,(DL) ; Get DNADLL users ID
LOAD T3,QBDA1,(P1) ; Data for function
CAIE T1,DI.INC ; Packet received?
IFSKP.
SKIPN EMBFLG ; Are we having MB resource problems?
IFSKP. ; Yes...
SETONE MBEBF,(T3) ; Indicate we are using emergency
ENDIF. ; buffers
ENDIF.
LOAD T4,QBDA2,(P1) ; Additional data
CALL RTRDLE ; Call the ROUTER
TRN
OPSTR <SKIPN>, DLUID,(DL) ; Do we have a circuit block?
STOR T1,DLUID,(DL) ; Then save expected circuit block
MOVE T1,DNDQBL ; Get the length of the QB block queue
CAIG T1,^D12 ; Is it greater than the desired
IFSKP. ; maximum?
MOVE T1,P1 ; Yes, the free the block
CALL DNFWDS
ELSE.
SYSPIF ; No interrupts please
MOVE T1,DNDQBQ ; No, get the queue head
MOVEM T1,(P1) ; and put this one at the head
MOVEM P1,DNDQBQ
AOS DNDQBL ; Add it into the count
SYSPIN
ENDIF.
JRST DNDJF1 ; Get next function block on queue
DNDNOQ: MOVEM P2,DNDIWQ ; Save pointer to new work queue
SETZB T1,T2
DMOVEM T1,(P2) ; and make it look empty
HRRM T1,2(P2) ; Preserve maximum queue length
RET ; No more function blocks queued
SUBTTL DNDDSP - Dispatch for calls from ROUTER
;DNDDSP - Dispatch for calls to DNADLL from ROUTER
;
; Call:
; T1 - Function (DF.???)
; T2 - DLB address
; T3 - Function specific data
; T4 - Additional function specific data
;
; Return:
; RET ;On failure (error code in T1)
; RETSKP ;On success
;
;
INTERNAL DNDDSP,DNDNMX
XRESCD
DNDDSP: SAVEAC <DL,LT>
MOVE DL,T2
LOAD LT,DLLTP,(DL) ; Point to line table entry
IFN FTPARANOIA,<
CAXL T1,DF.OPN ;Range check the
CAXLE T1,DF.MAX ; function code
BUG.(CHK,DNDIUF,DNADLL,SOFT,<Illegal function code from DNADLL user>,,<
Cause: DNADLL was called with a bad function by ROUTER
>,RTN)
> ;END IFN FTPARANOIA
JRST DNDCDL ; Do the dispatch
SUBTTL DNDNMX - Dispatch on calls from Network Management
XRESCD
DNDNMX:
IFN FTPARANOIA,<
CAXL T1,NF.SET ;Range check the
CAXLE T1,NF.CET ; function code
BUG.(CHK,DNDINF,DNADLL,SOFT,<Illegal function code from NTMAN>,,<
Cause: DNADLL was called with a bad function by NTMAN.
>,RTN)
> ;END IFN FTPARANOIA
SAVEAC <P1,P2,DL,LT> ; Everyone needs these for NTPARM
MOVE T1,DLLNXF(T1) ; Convert to internal function code
TXZE T1,DN.NDR ; Should we process this ourselves
CALLRET DNDNMF ; Yes, then do not dispatch to DLL
LOAD CX,NFETY,(T2) ; Get entity type
CAIE CX,.NTNOD ; Is the entity node?
IFSKP.
MOVEI CX,LD.NI ; Yes, then assume Ethernet (presently the
STOR CX,LIDEV,+CX ; only node entity is the NI physical address)
ELSE. ;
LOAD CX,NFEID,(T2) ; Get the entity ID
ENDIF.
TRNA
DNDCDL: LOAD CX,DLDID,(T2) ; Get the line ID
LOAD CX,LIDEV,+CX ; Get the device type
CAILE CX,LD.MAX ; Legal type?
RET
MOVE CX,DLLDSP(CX) ; Dispatch address
CALLRET (CX) ; Call the DLL
DLLDSP: IFIW <RTN&777777>
IFIW <DTDDSP&777777>
IFIW <RTN&777777>
IFIW <RTN&777777>
IFIW <DCIDSP&777777>
IFIW <NIDDSP&777777>
IFIW <RTN&777777>
DLLNXF:
DN.NMF!DF.SET ;NTMAN - Set parameter
DN.NMF!DF.CLR ;NTMAN - Clear parameter
DN.NMF!DF.RED ;NTMAN - Read parameter
DN.NMF!DF.SHC ;NTMAN - Show counters
DN.NMF!DF.SZC ;NTMAN - Show and zero counters
DN.NDR!DF.RET ;NTMAN - Return list (e.g. show known lines)
DN.NDR!DF.A2N ;NTMAN - Map node address to name
DN.NDR!DF.N2A ;NTMAN - Map node name to address
DN.NDR!DF.CET ;NTMAN - Check entity
SUBTTL Network management -- Show known/active lines
;DNDNMF Here to process Network management requests that are not dispatched
; to the DLLs
;
;Call: T1 /Function
; T2 /NF block
XSWAPCD
DNDNMF: MOVE P1,T2 ; Save address of NF block
HRRZ T1,T1 ; Clear any flags
CAIN T1,DF.CET ; Requested to check entity?
JRST DNDCET ; Yes, then be NML's humble servant
CAIE T1,DF.RET ; Is request for return list?
RNMXER (NF.MPE) ; We only do the two we just checked
TMNN NFBFF,(P1) ; Buffer present?
RNMXER (NF.MPE) ; Must have one for this stuff
LOAD T1,NFETY,(P1) ; Get entity type
CAIE T1,.NTLIN ; Is the entity line?
IFSKP.
LOAD T1,NFBLN,(P1) ; Get the buffer length
CAIGE T1,^D8 ; Must be long enough for all lines
RNMXER (NF.MPE) ; NTMAN/NML screwed up
LOADE T1,NFSEL,(P1) ; Get the selector type
CAXL T1,.NTSGN ; Range check the selection criteria
CAXLE T1,.NTKNO ; If not between SIGNIFICANT & KNOW
RNMXER (NF.MPE) ; we don't do it
CALLRET <-.NTSGN>+@[
IFIW <NMXILS&777777> ; SIGNIFICANT lines not supported
IFIW <NMXILS&777777> ; ADJACENT lines
IFIW <NMXILS&777777> ; LOOP line
IFIW <NMXSAL&777777> ; ACTIVE lines
IFIW <NMXSKL&777777>](T1) ; KNOWN lines
ELSE.
RNMXER (NF.FNS) ; We don't do any others
ENDIF.
NMXILS: RNMXER (NF.MPE) ; NTMAN is confused
XRESCD
SUBTTL Network management -- Show active lines
;Call: P1/ NF block
SUBTTL Network management -- Show known lines
;Call: P1/ NF block
XSWAPCD
NMXSKL: SKIPA T1,[-1] ; "Show known lines"
NMXSAL: SETZ T1, ; "Show active lines"
SAVEAC <Q1>
STKVAR <FUNC>
MOVEM T1,FUNC
SETZ P2, ; Initialize the count
LOAD T2,NFBLN,(P1) ; Get length of buffer
LOAD T4,NFBUF,(P1) ; Get buffer address
ADD T2,T4 ; Compute end of buffer
MOVNI T3,LNTBLL ; Number of entries in table
HRLZ T3,T3
XMOVEI Q1,LINTBL ; Address of table
NMXSA1: TMNN LTDVE,(Q1) ; Does the line exist?
JRST NMXSA2 ; No, don't include it
LOAD T1,LTSTA,(Q1) ; Get line state
SKIPL FUNC ; Is function "known"
CAIN T1,LS.ON ; No, then check for active
TRNA ; Must be running or "known"
JRST NMXSA2
LOAD T1,LTLID,(Q1) ; Get the line's ID
CAML T4,T2 ; Check to be sure we don't run off end
RNMXER (NF.MPE) ; NTMAN error if not enough room
MOVEM T1,(T4) ; Save into buffer
AOJ P2, ; Count it
AOJ T4, ; Advance buffer
NMXSA2: ADDI Q1,LT.LEN ; Step to next entry
AOBJN T3,NMXSA1
STOR P2,NFBLN,(P1) ; Tell NTMAN number written
RETSKP
XRESCD
SUBTTL DCIDSP - Dispatch routine for calls to CIDLL
DCIDSP: STKVAR <FUNC>
MOVEM T1,FUNC
TXZE T1,DN.NMF ; Is this from network management?
JRST DCIDS2 ; Yes, just do the dispatch
CAIE T1,DF.OPN ; Is this an open circuit call?
JRST DCIDS1 ; No, not special
MOVE T3,T2 ; Callback ID goes into T3
LOAD T2,DLDID,(T2) ; Get the line identifier for this circuit
TRNA
DCIDS1: LOAD T2,DLPID,(T2) ; Get the portal ID to talk to CIDLL
DCIDS2: CALL CINDSP ; Call CIDLL
RET ; Pass on the error
HRRZ T2,FUNC
CAIE T2,DF.OPN ; Was this an open request?
RETSKP ; No, just return success
STOR T1,DLPID,(DL) ; T1 should contain the Port ID
RETSKP
SUBTTL DTEDLL -- DTE data link layer
SUBTTL DTEDLL -- Intialize a line
;Call:
; T1/ Line ID
; T2/ Callback address
; T3/ Maximum blocksize to use on this line
DTDINI: LOAD T2,LIUNI,+T1 ; Get DTE number
MOVEI T1,DD.CKE ; Ask DTESRV to check its existance
CALL DLLDTE
RET ; No such DTE
RETSKP ; DTE exists
DTDSEC: LOAD T1,LTNBP,(LT) ; Get number posted
OPSTR <CAMGE T1,>,LTBNO,(LT) ; Enough posted?
CALL DTIPRB ; Try to post one then
RET
SUBTTL DTEDLL -- Dispatch from Router or Network Management
DTDDSP: MOVE CX,DTDDPT(T1) ; Get dispatch address
CALLRET (CX)
DTDDPT:
IFIW <DTDOPN&777777> ; Open a portal/circuit
IFIW <DTDCLS&777777> ; Close a portal/circuit
IFIW <DTDXMT&777777> ; Transmit a packet
IFIW <DTDSET&777777> ; Set a parameter
IFIW <DTDCLR&777777> ; Clear a parameter
IFIW <DTDRED&777777> ; Read paramater
IFIW <DTDSHC&777777> ; Show counters
IFIW <DTDSZC&777777> ; Show and zero counters
IFIW <DTDILL&777777> ; Return list
IFIW <DTDILL&777777> ; Map Node Address to Name
IFIW <DTDILL&777777> ; Map Node Name to Address
IFIW <DTDILL&777777> ; Check Entity Id
SUBTTL DTEDLL -- Open a port
;DTDOPN - Open a data link layer port
;
; Call:
; T1/ Function (DF.OPN)
; DL/ Data link block address
; LT/ Line table pointer
;
; Return:
; RET ;ON RESOURCE FAILURE
; RETSKP ;On success with T1 = Data link ID
;
; Uses: T1-T3
;
DTDOPN: LOAD LT,DLLTP,(DL) ; Get line table pointer
TMNN LTDVE,(LT) ; Does the line exist?
RET
SETONE DLLIU,(DL) ; Indicate circuit is using the line
LOAD T1,LTNBP,(LT) ; Get number of buffers currently posted
OPSTR <CAMGE T1,>,LTBNO,(LT) ; Do we have enough?
IFSKP.
SETZ T4, ; Yes, indicate no new buffer
ELSE.
LOAD T1,LTBSZ,(LT) ; User MSD size required
CALL DNGMSG ; Try for a message
RET ; Return if can't get a buffer
INCR LTNBP,(LT) ; Account for buffer
MOVE T4,T1 ; Message block address
ENDIF.
MOVX T1,DF.OPN ; Get function
LOAD T2,LTLID,(LT) ; Get line ID
LOAD T2,LIUNI,+T2
MOVE T3,DL ; Callback ID (DL block)
CALL DLLDTE
TRNA
RETSKP
JUMPE T4,R ; If no buffer then done
MOVE T1,T4 ; Get buffer address back from DTESRV
CALL DNFMSG ; Return memory
DECR LTNBP,(LT) ; Buffer is no longer posted
RET ; and signal failure
SUBTTL DTEDLL -- Transmit a packet
;DTDXMT - Send a packet to DTESRV
;
; Call:
; T3 - Message block
; DL - Data link block address
;
; Return:
; RET ;On error from driver
; RETSKP ;On success
;
DTDXMT: LOAD T2,DLKNO,(DL) ; Get "kontroller number"
CALL DLLDTE ;
RET
RETSKP
SUBTTL DTEDLL -- Close a port
;DTDCLS - Close a circuit on a DTE line
;
; Call:
; DL - Data link block address
;
; Return:
; RET ;On error
; RETSKP ;On success
;
DTDCLS: SETZRO DLLIU,(DL) ; Clear the line in use indicator
MOVEI T1,DF.CLS
LOAD T2,DLKNO,(DL) ; Get DTE number
CALL DLLDTE ; Ask DTESRV to terminate
RET
MOVX T2,LS.OFF
STOR T2,LTSTA,(LT) ; Save new line state as off
JUMPE T1,RSKP ; If we got an MB return it
DECR LTNBP,(LT) ; No longer posted
CALL DNFMSG ; Return it to the free pool
RETSKP
SUBTTL DTEDLL -- Network management - Parameter functions
XSWAPCD
DTDRED: MOVEI T3,NF.RED ; Funtion will be in T3
CALLRET DTDCPF ; Call common parameter routine
DTDSET: MOVEI T3,NF.SET
CALLRET DTDCPF ; Call common parameter routine
DTDCLR: MOVEI T3,NF.CLR
; CALLRET DTDCPF ; Call common parameter routine
DTDCPF: STKVAR <FUNC>
MOVEM T3,FUNC ; Save funtion (read,set,clear)
MOVE P1,T2 ; Save NTMAN function block
LOAD T1,NFETY,(P1) ; Get the entity type
CAIE T1,.NTCKT ; Is it circuit?
IFSKP.
LOAD T1,NFEID,(P1) ; Yes, get the entity ID again
CALL DNDGLB ; Find the data link block
RNMXND ; Don't know of this link-Return succes/no data
LOAD LT,DLLTP,(DL) ; Address of line table entry
XMOVEI T1,DCPTAB ; Use the circuit parameter table
MOVEI T2,DCPTBL ; and its length
ELSE.
CAIE T1,.NTLIN ; Is entity type line?
IFSKP.
LOAD T1,NFEID,(P1) ; Get the entity ID
CALL DNDGLT ; Get the line table structure for this line
RNMXER (NF.MPE) ; We don't support this device
MOVE LT,T1 ; Save line table entry
TMNN LTDVE,(T1) ; Does the line exist?
RNMXER (NF.URC) ; No,
XMOVEI T1,DLPTAB
MOVEI T2,DLPTBL ; and its length
ELSE.
RNMXER (NF.MPE) ; We don't support any others
ENDIF.
ENDIF.
MOVE T3,FUNC
CALLRET NTPARM
XRESCD
SUBTTL DTEDLL -- Network Management - Show/Show and zero counters
XSWAPCD
DTDSHC: SKIPA T3,[NF.COU] ;Load function code and skip
DTDSZC: MOVX T3,NF.SZC ;Load function code
STKVAR <FUNC>
MOVEM T3,FUNC ;T3 will be used later
MOVE P1,T2 ;Move NF pointer to where it should be
LOAD T1,NFETY,(P1) ;Get the entity type
CAIE T1,.NTCKT ;Is it a circuit
IFSKP.
LOAD T1,NFEID,(P1) ;Get circuit identifier
CALL DNDGLB ;Get the data link block block
RNMXND
XMOVEI T1,CICTAB ;Address of circuit counter table
MOVEI T2,CICTBL ; and its length
ELSE.
CAIE T1,.NTLIN ; Is entity a line?
IFSKP.
RNMXND ; Return with no data
ELSE.
RNMXER (NF.OPF) ; We don't do any others
ENDIF.
ENDIF.
;Call NTCTRS to do the real work
MOVE T3,FUNC ;Get function to do
CALLRET NTCTRS ;Read the counters and return
SUBTTL DTEDLL -- Network management - Return list
DTDRTL:
SUBTTL DTEDLL -- Network management - Check entity
DTDCET: RNMXER (NF.MPE)
SUBTTL DTEDLL -- Common call to DTESRV
XRESCD
DLLDTE: XCALLRET (MSEC1,DTEDSP) ; Call DTESRV
; Does not return here
DTDILL: RET
SUBTTL DTEDLL -- DTESRV interrupt level callbacks
;DTIPPI - Interrupt from DTESRV for MCB functions
;
;
INTERNAL DTIPPI
XRENT DTIPPI
IFN FTPARANOIA,<
CAXL T1,DI.ODN
CAXLE T1,DI.ICB
BUG. (CHK,DTIIFK,DNADLL,SOFT,<Illegal function code from DTE kontroller>,,<
This BUG is not documented yet.
>,RTN)
> ;END IFN FTPARANOIA
SAVEAC <DL,LT>
SKIPN DL,T2 ;What amounts to circuit block
BUG.(CHK,DNDCIZ,DNADLL,SOFT,<Callback ID is zero>,,<
Cause: DTESRV has lost the callback ID for this line or never had one.
Action: See if protocol was started when Router thought the circuit state was
off. Or, check DCNCID in DTESRV to see what it has for a callback ID.
>,RTN)
LOAD LT,DLLTP,(DL) ;Get line table entry
MOVE T1,DTIDLI(T1)
JRST (T1)
DTIDLI:
IFIW <DTIILL&777777> ;Unused
IFIW <DTITRN&777777> ;Output done
IFIW <DTIRCV&777777> ;Input complete
IFIW <DTILSC&777777> ;Line state change
IFIW <DTIILL&777777> ;Initialize circuit block
SUBTTL DTEDLL -- Transmit complete from DTESRV
DTITRN: STKVAR <MSG> ; Place to save message block address
MOVEM T3,MSG
MOVEI T1,DI.ODN ; Function is Output Done
CALL DNDQUE ; Queue it up
MOVE T1,MSG
CALL DNLENG
OPSTRM <ADDM T1,>,DLBYS,(DL) ; Update bytes sent
INCR DLDBS,(DL) ; Another packet sent
RET
SUBTTL DTEDLL -- Receive complete from DTESRV
; T2/ Callback ID
; T3/ MB address
DTIRCV: STKVAR <MSG>
MOVEM T3,MSG
DECR LTNBP,(LT) ; Account for buffer received
MOVEI T1,DI.INC ; Function is input complete
CALL DNDQUE ; Queue it up
MOVE T1,MSG
CALL DNLENG
OPSTRM <ADDM T1,>,DLBYR,(DL) ; Update bytes received
INCR DLDBR,(DL) ; Another packet received
CALL DTIPRB ; Post a buffer for DTESRV
RET
SUBTTL DTEDLL -- Post receive buffer for DTESRV
;DTIPRB - DTESRV request buffer
;
; Call:
; DL/ Data Link Block Address
; LT/ Line table address
;
; Return:
; RET ;ALWAYS WITH T1 POINTING TO MESSAGE BLOCK
; ; OR T1 SET TO ZERO ON ALLOCATION FAILURE
;
; Uses: T1-T3
DTIPRB: LOAD T1,LTNBP,(LT) ; Number of buffers posted
OPSTR <CAML T1,>,LTBNO,(LT) ; Do we have enough?
RET ; Yes, then exit
SAVEAC <P1>
LOAD T1,LTBSZ,(LT) ; User MSD size required
CALL DNGMSG ; Get the message block with T1 bytes of user
IFSKP. ; data area
SETZM EMBFLG ; Got a normal message block
SETZRO DLEBU,(DL) ; and no longer using our emergency buffer
ELSE.
LOAD T1,LTBSZ,(LT) ; User MSD size required
CALL DNDGEB ; Couldn't allocate - Try emergency buffer
JUMPE T1,RTN ; Just return if we're starving the DLL
ENDIF.
XMOVEI T2,IN.MSD(T1) ; Point to the input MSD
STOR T2,MBFMS,(T1) ; Store in first MSD slot
MOVE T3,T1 ; Buffer address for DTESRV
MOVE P1,T1 ; Save message address around DTESRV/DTESER
MOVEI T1,DD.PRB ; Function is post receive buffer
LOAD T2,DLKNO,(DL) ; Get DTE number
XCALL (MSEC1,DTEDSP)
TRNA
JRST [INCR LTNBP,(LT) ; Account for buffer posted
RET]
SETZRO DLEBU,(DL) ; No longer using our emergency buffer
MOVE T1,P1 ; Return message block to the free pool
CALL DNFMSG
SETZ T1,
RET
SUBTTL DTEDLL -- Line state change callback
; DL/ Data link block
; T3/ New state
DTILSC: STOR T3,LTSTA,(LT) ; Save the new state
TMNN DLLIU,(DL) ; Is Router using this line?
IFSKP.
MOVEI T1,DI.LSC ; Yes, notify ROUTER
CALL DNDQUE
ENDIF.
LOAD T1,LTSTA,(LT) ; Get state again
CAIN T1,LS.ON ; If new state = on?
CALL DTIPRB ; Yes, post a buffer
DTIILL: RET
SUBTTL NIDLL - Ethernet DLL interface
NIDINI: SAVEAC <UN>
CALL GETUNB ; Try to allocate space for a UN block
RET
MOVE UN,T1
MOVEI T1,4 ; Length of buffer for channel list
STOR T1,UNBSZ,(UN) ; Remember length for NISRV
CALL DNGWDZ
CALLRET FREUNB
STOR T1,UNBFA,(UN)
MOVX T1,NU.RCL ; Function is "Return channel list"
MOVE T2,UN ; Address of UN block
CALL DLLUNI
BUG.(CHK,DNDRLF,DNADLL,SOFT,<Read channel list failed>,<<T1,ERRCOD>>,<
Cause: NISRV returned an error when asked to return the channel list.
Action: Check error code returned in T1 to see what NISRV thinks is wrong.
Data: ERRCOD - Error code returned by NISRV
>,NIDIN1)
LOAD T1,UNBSZ,(UN) ; Get number of channels found
SKIPE T1 ; Any found?
AOS (P) ; Yes, so for now, indicate success
NIDIN1: LOAD T1,UNBFA,(UN) ; Free the buffer
CALL DNFWDS
CALL FREUNB ; Free the UN block
RET
SUBTTL NIDLL -- Once per second routine
NIDSEC: SAVEAC <UN>
LOAD T1,LTSTA,(LT) ; Get line's state
CAIE T1,LS.ON ; Is line running?
RET ; No, then don't attempt to post buffers
TMNN DLLIU,(DL) ; Is DECnet using the data link?
RET
LOAD UN,DLUNB,(DL) ; Get the associated UN block
JUMPE UN,RTN ; None?
LOAD T1,LTNBP,(LT) ; Get number posted
OPSTR <CAMGE T1,>,LTBNO,(LT) ; Enough posted?
CALL NIDPB ; No, try to post enough
RET
SUBTTL NIDLL -- Dispatch for calls from Router or Network Management
;Call:
; DL/ Data link block (if not network management)
; LT/ Line table pointer
NIDDSP: SAVEAC <UN>
MOVE T1,NIDDTB(T1) ; Get processor address
CALLRET (T1) ; and dispatch
NIDDTB: IFIW <NIFOPN&777777> ; Open portal/circuit
IFIW <NIFCNI&777777> ; Close portal/circuit
IFIW <NIFXNI&777777> ; Transmit packet
IFIW <NIFSP&777777> ; Set parameter
IFIW <NIFCP&777777> ; Clear parameter
IFIW <NIFRP&777777> ; Read parameter
IFIW <NIFSHC&777777> ; Show counters
IFIW <NIFSZC&777777> ; Show and zero counters
IFIW <NIFILL&777777> ; Return list
IFIW <NIFILL&777777> ; Map Node Address to Name
IFIW <NIFILL&777777> ; Map Node Name to Address
IFIW <NIFILL&777777> ; Check Entity Id
SUBTTL NIDLL -- Open portal
NIFOPN: LOAD UN,DLUNB,(DL) ; Get UN block from previous open
JUMPN UN,NIFOP1 ; If we have one then use it
CALL GETUNB ; Get a UN block
RET ; Return error
MOVE UN,T1 ; T1 contains allocated memory
STOR UN,DLUNB,(DL) ; Remember address for later user
NIFOP1: CALL CHKADR ; Verify that the physical address is DECnet's
RET ; It is not, return error
XMOVEI T1,DNDNII ; Where DLL should call us back
STOR T1,UNCBA,(UN) ; Give the driver tha callback address
SETZRO UNCHN,(UN) ; For now we will use channel 0
SETZRO UNPMS,(UN) ; We will not call at any interrupt level
SETZRO UNPTR,(UN) ; We are not passing byte pointers
STOR DL,UNUID,(UN) ; Associate DL block with callbacks
MOVE T1,RTRPRO ; Router's protocol type
STOR T1,UNPRO,(UN)
SETONE UNPAD,(UN) ; Padding is to be done
MOVEI T1,NU.OPN ; Function is open a port
MOVE T2,UN ; Address of UN block
CALL DLLUNI ; Call the driver
BUG.(CHK,DNDNOF,DNADLL,SOFT,<Attempt to open an ethernet portal failed>,<<T1,ERRCOD>>,<
Cause: NISRV returned an error when trying to open a portal.
Action: Check error code returned in T1 to see what NISRV thinks is wrong.
Data: ERRCOD - Error code returned by NISRV
>,NIFOF)
LOAD T1,UNPID,(UN) ; Get portal ID
STOR T1,DLPID,(DL) ; Save for transmits later
TMNN UNRUN,(UN) ; Is channel running?
IFSKP.
MOVEI T1,LS.ON
ELSE.
MOVEI T1,LS.OFF
ENDIF.
STOR T1,LTSTA,(LT) ; Save state of channel
;Now enable the multi-cast address(es) we will use
MOVE T2,DNDRNT ; Get Router's node type
CAIE T2,RNT.NR ; Endnode?
IFSKP.
MOVX T1,%RTEMA ; Yes, then multi-cast "ALL ENDNODES"
CALL NIFEMA
CALLRET NIFEMF ; Close portal if we can't enable
MOVX T1,%RTRMA ; Multi-cast address "ALL ROUTERS"
SKIPE EVSDRP
CALL NIFEMA ; Enable us to receive on this address
TRN
ELSE.
MOVX T1,%RTRMA ; Multi-cast address "ALL ROUTERS"
CALL NIFEMA ; Enable us to receive on this address
CALLRET NIFEMF ; Close portal if we can't enable
ENDIF.
;Now post some buffers for the NI driver
CALL NIDPB ; This will post as many as we ask for
; or as many as it can
SETONE DLLIU,(DL) ; Router is using the line
LOAD T1,LTSTA,(LT) ; Return line state to Router
RETSKP
NIFEMF:
BUG.(CHK,DNDEMF,DNADLL,SOFT,<Enable Ethernet multicast address failed>,<<T1,ERRCOD>>,<
Cause: NISRV returned an error when trying to enable a multicast address.
Action: Check the error code returned in T1 and investigate the problem in
NISRV.
Data: ERRCOD - Error code returned by NISRV
>)
CALL NIFCNI ; Close the portal
AOSA NIEMAF ; and count enable multicast failures
NIFOF: AOS NIOPNF ; Count open failures
RET ; and return error
SUBTTL NIDLL -- Close an ethernet protal
NIFCNI: SETZRO DLLIU,(DL) ; Indicate Router is no longer using the line
MOVX T1,NU.CLO ; Function is "close portal"
LOAD T2,DLUNB,(DL) ; UN block address
CALL DLLUNI
BUG.(CHK,DNDNCE,DNADLL,SOFT,<Error from NISRV when closing portal>,<<T1,ERRCOD>>,<
Cause: NISRV returned an error when asked to close our portal.
Action: Check error code returned in T1. It may be caused by DNADLL trying
to close a portal that wasn't open or a problem in NISRV
Data: ERRCOD - Error code returned by NISRV
>)
RET
SUBTTL NIDLL -- Send a packet on the wire
NIFXNI: SAVEAC <P1,P2>
DMOVE P1,T3 ; Save these from destruction
; P2 will have the next hop address
CALL GETUNB
RET
MOVE UN,T1
LOAD T1,DLPID,(DL) ; Get the portal ID
STOR T1,UNPID,(UN) ; and put it in UN block for DLL
SETZRO UNBSZ,(UN) ; Byte count is zero for MSD buffers
LOAD T1,MBFMS,(P1) ; Get address of MSD string
STOR T1,UNBFA,(UN)
STOR MB,UNRID,(UN) ; So we can easily recover MB address
JUMPE P2,NIFXN1 ; No nexthop, must be multicast
MOVX T1,%RTHIO ; Build nexthop ethernet address
STOR T1,UNDAD,(UN) ; Store the destination address
STOR P2,UNDAD,+1(UN) ;
JRST NIFXN2
NIFXN1: LOAD T1,MBDS1,(MB) ; Destination in MB is the multicast address
STOR T1,UNDAD,(UN)
SETZRO UNDAD,+1(UN) ; This is always 0 anyway
NIFXN2:
IFN FTRTST,<
JE RMTST,(MB),NIFXN3 ; Test flag on?
MOVEI P1,TSTBLK ; Yes, then get current time
S1XCT <CALL UPDTCK> ; Must be executed in section 1 because of
; RDTIME bug
STOR T1,TRTTD,(P1) ; Save it for later computation
LOAD T2,TRTAF,(P1) ; and then compute the time latency
SUB T1,T2 ; since we entered
STOR T1,TRTED,(P1) ; RTRFWD
NIFXN3: >
MOVX T1,NU.XMT ; Function is transmit message
MOVE T2,UN ;
CALL DLLUNI
BUG.(CHK,DNDXMF,DNADLL,SOFT,<Transmit message to Ethernet failed>,<<T1,ERRCOD>>,<
Cause: NISRV returned an error when trying to queue a message for transmit.
Action: Check error code returned in T1 and investigate problem in NISRV.
Data: ERRCOD - Error code returned by NISRV
>,FREUNB)
CALL FREUNB ; and return the UN block
RETSKP
SUBTTL NIDLL -- Network Management - Parameter functions
XSWAPCD
NIFSP: MOVEI T3,NF.SET ; Set parameter
CALLRET NIFCPR ; Call our common setup for parameters
NIFCP: MOVEI T3,NF.CLR ; Clear parameter
CALLRET NIFCPR ; Call our common setup for parameters
NIFRP: MOVEI T3,NF.RED ; Read parameter
; CALLRET NIFCPR ; Call our common setup for parameters
NIFCPR: STKVAR <FUNC>
MOVEM T3,FUNC
MOVE P1,T2 ; NTPARM wants function block here
LOAD T1,NFETY,(P1) ; Get the entity type
CAIE T1,.NTLIN ; Is it a line?
IFSKP.
LOAD T1,NFEID,(P1) ; Get the entity ID
CALL DNDGLT ; Get the line table structure for this line
RNMXER (NF.MPE) ; We don't support this device
MOVE LT,T1 ; Save line table entry
TMNN LTDVE,(T1) ; Does the line exist?
RNMXER (NF.URC) ; No,
XMOVEI T1,NLPTAB ; Address of line parameter table
MOVEI T2,NLPTBL ; and its length
ELSE.
CAIE T1,.NTCKT ; Is it circuit?
IFSKP.
LOAD T1,NFEID,(P1) ; Get the entity ID
CALL DNDGLB ; Get the correct data link block
RNMXND ; Return success but no data
LOAD LT,DLLTP,(DL) ; Get line table pointer
XMOVEI T1,NCPTAB ; Address of circuit parameter table
MOVEI T2,NCPTBL ; And its length
ELSE.
XMOVEI T1,NNPTAB ; Use Node parameter table
MOVEI T2,NNPTBL ;
ENDIF.
ENDIF. ; Function is in T3
MOVE T3,FUNC ; Recover requested function
CALLRET NTPARM ; Call the common parameter processer
; T1/ table
; T2/ table's length
; T3/ function
XRESCD
SUBTTL NIDLL -- Network management - Show /Show and zero counters
XSWAPCD
NIFSHC: SKIPA T3,[NF.COU] ; Show counters
NIFSZC: MOVEI T3,NF.SZC ; Show and zero counters
STKVAR <FUNC,BUFADR>
MOVEM T3,FUNC ; T3 will be used later
CALL NIDLKW ; Get the interlock (wait if have too)
MOVE P1,T2 ; Save the NF block pointer
LOAD T1,NFBLN,(P1) ; Get length of buffer
AOJ T1, ; Plus one more for flags
CALL DNGWDS ; Get a buffer of at least that size for NISRV
RNMXER (<NF.OPF>,<SETOM NIDLOK>)
MOVEM T1,BUFADR ; Buffer address
LOAD T1,NFETY,(P1) ; Get the entity type
CAIE T1,.NTCKT ; Is it a circuit?
IFSKP.
LOAD T1,NFEID,(P1) ; Get circuit identifier
CALL DNDGLB ; Get the data link block block
IFNSK.
MOVE T1,BUFADR ; Failed so free up the buffer we have
CALL DNFWDS
RNMXER (<NF.URC>,<SETOM NIDLOK>)
ENDIF.
MOVE T1,FUNC ; Recover function
MOVE T2,BUFADR ; Buffer address
AOJ T2, ; Step over flags
LOAD T3,NFBLN,(P1) ; and length
CALL NIFRPC ; Read the portal counters
IFNSK.
MOVE T1,BUFADR
CALL DNFWDS
RNMXER (<NF.OPF>,<SETOM NIDLOK>)
ENDIF.
ELSE.
CAIE T1,.NTLIN ; Is entity a line?
IFSKP.
LOAD T1,NFEID,(P1) ; Get entity ID
TXZ T1,LIDRP ; and clear any multi-drop numbers
CALL DNDGLT ; (T1) Get the line table for this line
RNMXER (NF.URC)
TMNN LTDVE,(T1) ; Does the line exist?
RNMXER (NF.URC) ; No, then no counters
MOVE T1,FUNC ; Get function (read or read/clear)
MOVE T2,BUFADR ; Buffer address
AOJ T2, ; Step over flags
LOAD T3,NFBLN,(P1) ; and length
CALL NIFRCC ; Read channel counters
IFNSK.
MOVE T1,BUFADR ; Error, free the buffer
CALL DNFWDS
RNMXER (<NF.OPF>,<SETOM NIDLOK>)
ENDIF.
ELSE.
MOVE T1,BUFADR ; Don't need this buffer any more
CALL DNFWDS
RNMXER (<NF.MPE>,<SETOM NIDLOK>)
ENDIF.
ENDIF.
MOVEI T1,NISCHK ; Scheduler test routine (uses only 18 bits)
MDISMS ; Dismiss this process until NISRV returns data
SETOM NIDLOK ; Free the lock
LOAD T1,NFETY,(P1) ; Get the entity type again ...
CAIE T1,.NTCKT ; Is it a circuit?
IFSKP.
XMOVEI T1,NCCTAB ; Address of circuit (portal) counter table
MOVEI T2,NCCTBL ; and its length
ELSE.
XMOVEI T1,NLCTAB ; Address of line (channel) counter table
MOVEI T2,NLCTBL ; and its length
ENDIF.
MOVE P2,BUFADR ; NTCTRS needs the buffer address
SKIPE (P2) ; Any errors from NISRV?
JRST NIFSCE ; Yes..
MOVE T3,FUNC
AOJ P2, ; Step over flags
CALL NTCTRS ; Now copy the data to NTMAN's buffer
JRST NIFSCE ; Did not successfully copy data
MOVE T1,BUFADR ; Data copied, free the buffer
CALL DNFWDS
RETSKP
NIFSCE: MOVE T1,BUFADR ; Free the buffer
CALL DNFWDS
RNMXER (NF.OPF) ; and return operation failure
ENDSV.
XRESCD
SUBTTL NIDLL -- Calls for illegal functions
NIFILL: RET ; We don't support the function
SUBTTL NIDLL -- Network management - Read portal counters
;Call:
; T1/ Function (read/read and zero)
; T2/ Buffer for counter data
; T3/ Buffer length
; DL/ Data link block
XSWAPCD
NIFRPC: STKVAR <FUNC,BUFADR,BUFLEN>
MOVEM T1,FUNC
MOVEM T2,BUFADR
MOVEM T3,BUFLEN
CALL GETUNB ; Get a UN block
RET
MOVE UN,T1
LOAD T1,DLPID,(DL) ; Get the portal ID
STOR T1,UNPID,(UN)
STOR T1,UNSPI,(UN) ; Portal to read buffers for
MOVE T1,BUFADR ; Get address of buffer for NISRV
STOR T1,UNBFA,(UN)
MOVE T1,BUFLEN ; and its length
STOR T1,UNBSZ,(UN)
MOVE T1,FUNC
CAIE T1,NF.SZC ; Is function show and zero?
IFSKP.
SETONE UNZRO,(UN) ; Yes, set the to be zeroed flag
ENDIF.
SETZM RCCFLG ; Clear read/clear complete flag
MOVX T1,NU.RPC ; Function is read portal counters
MOVE T2,UN
CALL DLLUNI
CALLRET NMXERR ; Failed with error in T1
CALLRET NMXGUD ; Success - counters loaded into users buffer
ENDSV.
XRESCD
SUBTTL NIDLL -- Network management - Read channel counters
;Call:
; T1/ Function to perform
; T2/ Counter buffer address
; T3/ Counter buffer length
XSWAPCD
NIFRCC: STKVAR <FUNC,BUFADR,BUFLEN>
MOVEM T1,FUNC
MOVEM T2,BUFADR
MOVEM T3,BUFLEN
CALL GETUNB ; Get a UN block
RET
MOVE UN,T1
CALL NIFOIP ; Get the info portal ID
RET ; Can't get it
STOR T1,UNPID,(UN)
LOAD T1,NFETY,(P1) ; Get line ID
LOAD T1,LIUNI,+T1 ; Get unit number
STOR T1,UNCHN,(UN)
MOVE T1,BUFADR ; Get users buffer address
STOR T1,UNBFA,(UN)
MOVE T1,BUFLEN ; and length of buffer
STOR T1,UNBSZ,(UN)
MOVE T1,FUNC
CAIE T1,NF.SZC ; Is function show and zero?
IFSKP.
SETONE UNZRO,(UN) ; Yes, set the to be zeroed flag
ENDIF.
SETZM RCCFLG ; Clear read/clear complete flag
MOVX T1,NU.RCC ; Function is read channel counters
MOVE T2,UN
CALL DLLUNI
CALLRET NMXERR ; Failed with error in T1
CALLRET NMXGUD ; Success - Wait for counters to be loaded
ENDSV. ; into data buffer
XRESCD
SUBTTL NIDLL -- Network management - Read Ethernet addreses
;NMFRHA - Read hardware address
XSWAPCD
NMFRHA: JSP T1,NIFRCI ; Read the address from the driver
LOAD T1,UNHAD,(UN) ; Get hi-order of address
LOAD T2,UNHAD,+1(UN) ; and lo-order
LOAD T3,NFBUF,(P1) ; Get the buffer address
MOVEM T1,(T3) ; and store the hardware address in it
MOVEM T2,1(T3)
RET
;Read current physical address
NMFRPA: JSP T1,NIFRCI ; Read the physical address from the driver
LOAD T1,UNCAR,(UN) ; Get hi-order of address
LOAD T2,UNCAR,+1(UN) ; and lo-order
LOAD T3,NFBUF,(P1) ; Get the buffer address
MOVEM T1,(T3) ; and store the physical address in it
MOVEM T2,1(T3)
RET
XRESCD
SUBTTL NIDLL -- Network management - Read channel information
;Call:
; P1/ NF argument block
XSWAPCD
NIFRCI: STKVAR <RETADR>
MOVEM T1,RETADR
CALL GETUNB ; Get a UN block
RET
MOVE UN,T1
LOAD T1,NFETY,(P1) ; Get entity type
CAIE T1,.NTNOD ; Is it node?
IFSKP.
SETZ T1, ; Use channel 0
ELSE.
LOAD T1,NFEID,(P1) ; Get entity ID
LOAD T1,LIUNI,+T1 ; Get unit number
ENDIF.
STOR T1,UNCHN,(UN)
MOVX T1,NU.RCI ; Function is read channel information
MOVE T2,UN
CALL DLLUNI ; Call NISRV
CALLRET NMXERR ; Error - T1 contains reason (???) NTMAN?
MOVE T1,RETADR
CALL (T1) ; Let caller copy the data he wants
CALL FREUNB
MOVX T1,NF.FCS ; Indicate success
; Can't use NMXGUD here - Must be non-skip
RET ; Success - Parameter loaded into users buffer
XRESCD
SUBTTL NIDLL -- Network management - Read counters interlock
;NIDLKW - Interlock routine for process level callers
;
; Call:
; T1/ Address of processor to call with the interlock
;
; Return:
; RET
;
; Uses: T1
;
;This version of the interlock will spin on NIDLOK until it is freed.
;This is to be called only from process level, thus it will only spin
;if another process has the interlock.
;
;Note that NIDLOK must be uncached if this is a multiprocessor system.
NIDLKW:
IFN FTOPS10,<
AOSE NIDLOK ; Test and set the interlock
JRST NIDLKW ; Its locked, spin until its freed
APRID NIDLKO ; Set the owner of the interlocK
>;END IFN FTOPS10 ; Can only be competing with another
; processor on TOPS10
IFN FTOPS20,<
AOSN NIDLOK ; Test and set the interlock
JRST NIDLKF ; Its free, continue processing
XMOVEI T1,NIDLST ; No, set up scheduler test
MDISMS ; Wait for competing process to finish
JRST NIDLKW ; Ok, lets try again
RESCD
NIDLST: SKIPL NIDLOK ; Is read counters lock free yet?
RET ; No, sleep on
RETSKP ; Yes, wake up fork
XRESCD
NIDLKF:
> ;End FTOPS20
RET
RESCD
NISCHK: SKIPL RCCFLG ; Has data been returned yet?
RET ; No, sleep on
RETSKP ; Yes, wake up fork
XRESCD
NMXERR: BUG.(CHK,DNDNNF,DNADLL,SOFT,<Network management failed>,<<T1,ERRCOD>>,<
Cause: NISRV returned an error when asked to read network management
parameters or counters.
Action: Check error code returned in T1 to see what NISRV thinks is wrong.
Data: ERRCOD - Error code returned by NISRV
>)
TRNA
NMXGUD: AOS (P) ; Make a skip return
SAVEAC <T1> ; Preserve error code if any
CALL FREUNB
RET
SUBTTL NIDLL -- Set the DECnet address in the channel
REPEAT 0,<
;Call with:
; UN/ UN block
; DL/ DL block
NIFSCA: SETZRO UNCHN,(UN) ; Channel zero
MOVE T1,%RTHIO ; DECnet address (high order)
STOR T1,UNDAD,(UN)
MOVE T1,RTRLOO ; low order
STOR T1,UNDAD,+1(UN)
MOVX T1,NU.SCA
MOVE T2,UN
CALL DLLUNI
RET
RETSKP
>
SUBTTL NIDLL -- Post buffers for the NIDLL
;Call:
; DL/ Data link block
; UN/ UN block
NIDPB: SAVEAC <MB>
DO.
LOAD T1,LTNBP,(LT) ; Get number posted
OPSTR <CAML T1,>,LTBNO,(LT) ; Enough posted?
RET
LOAD T1,LTBSZ,(LT) ; Get the size to post for this link
ADDI T1,%RTEHS ; Add overhead for Ethernet header
MOVE MB,T1 ; Save size around call to DNGMSG
CALL DNGMSG ; Request a message block
IFSKP.
SETZM EMBFLG
SETZRO DLEBU,(DL) ; No, longer using emergency buffer
ELSE.
MOVE T1,MB ; Recover size and try for an emergency
CALL DNDGEB ; buffer
JUMPE T1,RTN ; If zero we are starving the driver
ENDIF.
MOVE MB,T1
STOR T1,UNRID,(UN) ; Store the MB as request ID
XMOVEI T1,+UD.MSD(MB) ; Get address of MSD
CALL DNF2WG## ; Fetch a two word global byte pointer
OPSTR <DMOVEM T1,>,UNBFA,(UN) ; Store buffer address
MOVEI T2,UNA.EV
STOR T2,UNADS,(UN) ; We are using EXEC virtual memory
LOAD T1,MDALL,+UD.MSD(MB) ; Get allocated length
STOR T1,UNBSZ,(UN) ; So the port knows what it can swallow
MOVEI T1,NU.RCV ; Function is post receive buffer
MOVE T2,UN
CALL DLLUNI ; Attempt to post the buffer
JRST [ SETZRO DLEBU,(DL) ; No longer using our emergency buffer
MOVE T1,MB ; Get message block address
CALL DNFMSG ; Free message block we couldn't post
AOS NPBERR ; Count failures
RET] ; and return
INCR LTNBP,(LT) ; Account for buffer posted
LOOP. ; Loop back
ENDDO.
SUBTTL NIDLL -- Enable multicast address
;Call: T1/ Address to enable
; UN/ UN block to use
NIFEMA: STOR T1,UNDAD,(UN) ; Save the address for the port
SETZRO UNDAD,+1(UN) ; Node address field is zero
SETZRO UNRSP,(UN) ; No callback is desired
MOVX T1,NU.EMA ; Enable this address
MOVE T2,UN
CALL DLLUNI
RET
RETSKP
SUBTTL NIDLL -- Get informational portal ID
;Call:
; With nothing
;
;Uses: T1-T4
XSWAPCD
NIFOIP: SKIPE T1,INFPID ; Do we have one already?
RETSKP ; Return it in T1
SAVEAC <UN>
CALL GETUNB
RET
MOVE UN,T1
SETO T1, ; Get a -1
STOR T1,UNPRO,(UN) ; Indicate we want an information portal
XMOVEI T1,DNDNII ; Get callback routine address
STOR T1,UNCBA,(UN) ; Save it
MOVX T1,NU.OPN ; Open the portal
MOVE T2,UN ; Get UN block addr into T2
CALL DLLUNI
RET ; Sigh...
LOAD T1,UNPID,(UN) ; Get informational portal ID
MOVEM T1,INFPID ; Save for posterity
CALL FREUNB
MOVE T1,INFPID ; Return portal ID to caller
RETSKP ; Return PID in T1
XRESCD
SUBTTL NIDLL -- Close the information portal
;Call:
NIFCIP: SKIPN INFPID ; Is there an information portal open?
RET ; No
SAVEAC <UN>
CALL GETUNB ; Yes, get a UN block
MOVE UN,T1
MOVE T2,T1
MOVE T1,INFPID ; Get the portal ID for NISRV
STOR T1,UNPID,(T2)
MOVX T1,NU.CLO ; Function is "close portal"
CALL DLLUNI
TRNA
SETZM INFPID ; No longer have a portal open
CALL FREUNB
RET
SUBTTL NIDLL -- Interrupt level callbacks from NISRV
;DNDNII - Interrupt from the NI data link layer
;
; Call:
; T1 - Function
; T2 - User block
;
; Return:
; RET ;Only return
;
; Uses: T1-T3
;
DNDNII:
IFN FTPARANOIA,<
CAXL T1,NU.OPN
CAXLE T1,NU.MAX
BUG. (CHK,DNDIKF,DNADLL,SOFT,<Illegal function code from DLL kontroller>,,<
Cause: NISRV called back with a function code that was not recognized as
valid by DNADLL.
Action: Check to see if there is a version skew between DNADLL and NISRV.
>,RTN)
> ;END IFN FTPARANOIA
SAVEAC <DL,LT,UN,P1,MB>
MOVE UN,T2 ; UN block address
LOAD DL,UNUID,(UN) ; From that get the data link block
LOAD LT,DLLTP,(DL) ; Point to line table entry
MOVE T1,NIIDLI(T1)
JRST (T1) ; Dispatch to correct routine
NIIDLI: IFIW <NIIILL&777777> ; Unused
IFIW <NIIILL&777777> ; Unused as a callback
IFIW <NIICLS&777777> ; Close a Portal Callback
IFIW <NIIRCV&777777> ; Datagram Received Callback
IFIW <NIITRN&777777> ; Datagram Sent Callback
IFIW <NIIILL&777777> ; Enable Multicast Callback
IFIW <NIIILL&777777> ; Disable multicast callback
IFIW <NIIRPC&777777> ; Read portal counters callback
IFIW <NIIRCI&777777> ; Channel state change callback (Chan info)
IFIW <NIIILL&777777> ; Unused as a callback (RPL)
IFIW <NIIILL&777777> ; Unused as a callback (RCL)
IFIW <NIIILL&777777> ; Unused as a callback (RPI)
IFIW <NIISCA&777777> ; Set channel address callback
IFIW <NIIRCC&777777> ; Read channel counters callback
IFIW <NIIILL&777777> ; Unused as a callback
NMXILL:
NIIILL: RET
SUBTTL NIDLL -- Close complete callback
NIICLS: RET
SUBTTL NIDLL -- Input complete
;Call
; UN/ UN block returned by NISRV
;
NIIRCV: DECR LTNBP,(LT) ; Another buffer used up
LOAD MB,UNRID,(UN) ; Set up MB
SKIPE T3 ; Any errors?
JRST NIIRCE ; Yes, log event and return message
LOAD T1,UNSAD,(UN) ; Get the high order source address
STOR T1,MBSR1,(MB) ; Put it into the MB
SETZ T1,
LOAD T2,UNSAD,+1(UN) ; Get the low order (node address) in
LSHC T1,^D8 ; string format. Shift nn-2 into T1
LSH T2,-^D20 ; Right justify the area+2
IOR T1,T2 ; and include the number
STOR T1,MBSRC,(MB) ; Stuff it into the MB
OPSTR <DMOVE T1,>,UNBFA,(UN) ; Fetch two word global byte pointer
XMOVEI T3,+UD.MSD(MB) ; Get address of MSD
CALL DNSBP## ; Store the byte pointer into the MSD
LOAD T1,UNBSZ,(UN) ; Get the length received
STOR T1,MDBYT,+UD.MSD(MB) ; Save as bytes written
MOVEI T1,DI.INC ; Function is input complete
MOVE T2,DL
MOVE T3,MB ;
LOAD T4,UNDAD,(UN) ; So Router knows destination multi-
; cast if running as endnode
CALL DNDQUE ; Queue up the buffer for jiffy level
CALL NIDPB ; Post another buffer if possible
RET
NIIRCE: CAIE T3,UNLER% ; Length error?
IFSKP.
MOVEI T1,DE%RCF ; Yes, say receive failed
CALL NIEVNT ; See if we need to log an event
ENDIF.
CAIE T3,UNRAB% ; Buffer being returned because port is
CALL NIDPB ; shutting down? No, post another
SKIPE T1,MB ; Get message block address
CALLRET DNFMSG ; and return to free list
RET
SUBTTL NIDLL -- Transmit done
NIITRN: SKIPN T3 ; Any errors?
IFSKP.
MOVEI T1,DE%XMF ; Transmit failed
CALL NIEVNT ; See if we need to log an event
ENDIF.
MOVE T2,DL ; T2 = data link block address
LOAD T3,UNRID,(UN) ; Address of message block
MOVEI T1,DI.ODN ; Function is Output Done
CALL DNDQUE ; Queue it up
RET
SUBTTL NIDLL -- Read portal counters complete
NIIRPC: SETOM RCCFLG ; Read counters is complete
LOAD T1,UNBFA,(T2) ; Get buffer address
MOVEM T3,-1(T1) ; Store flags ahead of data
RET
SUBTTL NIDLL -- Channel state change callback (line state change)
;Call:
; UN/ UN block
; DL/ DL block
; LT/ Line table pointer
NIIRCI: MOVEI T3,LS.OFF ; Assume state is off
TMNE UNRUN,(UN) ; Is new state "running"?
MOVEI T3,LS.ON ; Yes, change to on state
LOAD T1,LTSTA,(LT) ; Get current state
CAIN T1,(T3) ; Any change?
RET ; No, then done
STOR T3,LTSTA,(LT) ; Save new state
TMNN DLLIU,(DL) ; Is Router using this line?
IFSKP.
CAIN T3,LS.ON ; Yes, is new state "running"?
CALL NIDPB ; Yes, try to post buffers
MOVEI T1,DI.LSC ; Notify ROUTER for either state
MOVE T2,DL ; T2 must contain the DL block address
CALL DNDQUE
ENDIF.
TMNN UNRUN,(UN) ; Is new state "running"?
CALL NIFCIP ; No, close the information portal
RET
SUBTTL NIDLL -- Set channel address callback
;Call:
; DL/ Data link block (if any)
; LT/ Line table pointer
; UN/ UN block address
NIISCA: LOAD T3,UNCAR,(UN) ; Get hi-order of new address
LOAD T4,UNCAR,+1(UN) ; Get low order address
DMOVEM T3,DCNNIA ; Save address
JUMPE DL,R ; If no data link block then don't check for
; DECnet address
TMNN DLLIU,(DL) ; Is Router using this data link?
RET ; No, not to worry then
CAMN T3,[%RTHIO] ; YES, is the address still DECnet's?
CAME T4,RTRLOO ; Is it our local address?
IFSKP.
TMNE LTCAD,(LT) ; Was it DECnet before?
RET ; Yes, then done
SETONE LTCAD,(LT) ; Indicate channel address is DECnet
MOVX T3,LS.ON ; Signal a line state change to on
MOVE T2,DL
MOVX T1,DI.LSC
CALL DNDQUE ; Notify Router
ELSE.
TMNN LTCAD,(LT) ; Was it DECnet before?
RET ; No, then done
SETZRO LTCAD,(LT) ; Channel address is not DECnet's
MOVEI T1,DI.LSC ; Yes, notify ROUTER
MOVE T2,DL ; T2 must contain the DL block address
MOVX T3,LS.OFF ; Report new line state is off
CALL DNDQUE
ENDIF.
RET
SUBTTL NIDLL -- Read channel counters callback
NIIRCC: SETOM RCCFLG ; Read couters is complete
LOAD T1,UNBFA,(T2) ; Get buffer address
MOVEM T3,-1(T1) ; Store flags ahead of data
RET
SUBTTL NIDLL -- Set channel state callback
NIISCC: RET
SUBTTL NIDLL -- Ethernet event reporter
;Call:
; T1/ Type
; T3/ Reason
; DL/ data link block
;
NIEVNT: STKVAR <EVNTYP>
MOVEM T1,EVNTYP
MOVNI T2,NIETBL ; Length of event table
HRLZ T2,T2
NIEVN1: HLRZ T1,NIEVTB(T2) ; Get reason code
CAIN T1,(T3) ; Is this the one?
JRST NIEVN2 ; Yes, try to log the event
AOBJN T2,NIEVN1 ; No, try next
RET
NIEVN2: MOVE T1,EVNTYP ; Get type
HRRZ T3,NIEVTB(T2) ; Get event reason
LOAD T2,DLDID,(DL) ; Get entity ID
CALLRET RTNEVT
;Data link layer events
DE%XMF==^D14 ; Transmit failed
DE%RCF==^D15 ; Receive failed
NIEVTB: XWD UNEXC%,^D0 ; Excessive collisions
XWD UNCCF%,^D1 ; Carrier check failed
XWD UNSHT%,^D3 ; Short circuit
XWD UNOPN%,^D4 ; Open circuit
XWD UNLER%,^D5 ; Length error (frame too long)
XWD UNRFD%,^D6 ; Remote failure to defer
NIETBL=.-NIEVTB
SUBTTL Network Management Interface -- RTNEVT - Event Reporter
;RTNEVT - Report Router event
;
; Call:
; T1/ Event type
; T2/ Entity ID (we know the entity type from DNETAB)
; T3/ Event specific word (REASON, STATUS, etc.)
;
; Return:
; RET ;ALWAYS
;
; Uses: T1-T4
;
;This calls something which will call network management to log this event
;which has taken place. This routine is called by the EVENT macro.
EVTMLN==^D30 ;Maximum length of event parameter data (bytes)
RTNEVT: SAVEAC <P1,P2>
DMOVE P1,T1
MOVEM T3,DNDEVW ; Save the event argument
;Check if event should be thrown away
MOVX T1,.NCDLL ; DNADLL event class
STOR T1,FACCL,+T2
STOR P1,FACTY,+T2 ; and event type to T2
MOVX T1,EV.FIL ; Function code "filter event"
CALL NMXEVT
RET ; -throw it away
SKIPN DNDECP ; Verify that EC pointer is non-zero
RET ; -was zero, must have failed to initialize
; Continued...
;Ok, to log an event
MOVX T1,NE.LEN+<<EVTMLN+3>/4> ;Get enough for arg block and
; Maximum amount of event parameter data
CALL DNGWDZ ;Get the words
BUG.(INF,DNDCGV,DNADLL,SOFT,<Couldn't get memory for event arg block>,,<
Cause: DECnet has used all of its available memory and could not give us any.
Action: Try to determine who is using all the memory and why. Setting FTDEBUG
to non-zero will give more information about who is using each block
of memory.
>,RTN)
STOR P1,NECTY,(T1) ; Put the event type in the arg block
STOR P2,NEEID,(T1) ; Put entity-id in event block
MOVE P1,T1 ; Save the pointer to the block
MOVE T1,DNDECP ; Get EC pointer
STOR T1,NEECP,(P1) ; and store it in NE block
MOVX T1,.NTLIN ; Get our entity type
STOR T1,NEETP,(P1)
MOVX T1,.NCDLL ; The event class is data link
STOR T1,NECCL,(P1) ; Put in ne arg block
XMOVEI T1,NE.LEN(P1) ; Make a fullword pointer to data
STOR T1,NEDAT,(P1) ; Store pointer to it in arg block
MOVE P2,[POINT 8,NE.LEN(P1)] ; Make up byte pointer to parameter data
SETZ T4, ; Intialize count of bytes written
CALL DNDRFR ; Write parameter strings into the data area
LOAD T1,NECTY,(P1) ; Get event type
CAIE T1,DE%RCF ; Was this a receive failure?
IFSKP.
CALL DNDWEH ; Yes, put Ethernet addresses in event data
ELSE.
CALL DNDDIS ; No, then insert the TDR (distance)
ENDIF.
STOR T4,NEDLN,(P1) ; Save count of bytes actually written
MOVX T1,EV.LOG ; Function code is "log an event"
MOVE T2,P1 ; NE pointer in T2
CALL NMXEVT ; Call the event processor
TRN
RET ; Return, NTMAN will deallocate NE block
SUBTTL Network Management Interface -- RTNEVT - Event data routines
DNDRFR: MOVEI T1,^D16 ; Parameter number - Failure reason
MOVEI T2,2 ; Get number of bytes
CALL PUTNBT ; Insert the bytes swapped
MOVEI T1,201 ; Coded, single field, length 1 byte
CALL PUTBYT ; Stuff it
MOVE T1,DNDEVW ; Get the reason
CALLRET PUTBYT ; Insert it and return
;Writes Ethernet addresses into event data
DNDWEH: MOVEI T1,^D18 ; Parameter number - Ethernet header
MOVEI T2,2 ; Get number of bytes
CALL PUTNBT ; Insert the bytes swapped
MOVEI T1,302 ; Coded multiple with 2 fields
CALL PUTBYT
LOAD T1,UNDAD,(UN) ; Get 6 char destination address
LOAD T2,UNDAD,+1(UN)
DMOVEM T1,ETHADR ; and save it for event data
CALL PUTEA ; Put in destination address
LOAD T1,UNSAD,(UN) ; Get 6 char source address
LOAD T2,UNSAD,+1(UN)
DMOVEM T1,ETHADR ; and save it for event data
CALLRET PUTEA ; Put in source address
;Writes the distance (TDR) data into the event
DNDDIS: MOVEI T1,^D17 ; Parameter number - Distance
MOVEI T2,2 ; Get number of bytes
CALL PUTNBT ; Insert the bytes swapped
MOVEI T1,002 ; Data type - decimal unsigned, two bytes
CALL PUTBYT
MOVEI T2,2 ; Number of bytes to transfer
LOAD T1,UNTDR,(UN) ; Get Time Domain Reflectometry value
CALLRET PUTNBT ; Put data into event buffer
SUBTTL Network Management Interface -- RTNEVT - Event data routines
;Writes a 6 character hex address into the event data
PUTEA: MOVEI T1,040 ; Not coded, hex image
CALL PUTBYT ; Install data type
MOVEI T1,6 ; Length of data is always 6 bytes
CALL PUTBYT ; Install length of data
MOVX T2,6 ; We always want six bytes
MOVE T3,[POINT 8,ETHADR] ; Point to address for event data
CALLRET PUTNBY ; Put them in the NE block
;Put n (in T2) bytes in the string pointed to by pointer in T3.
;It also updates T4, which is the count of bytes put in so far.
PUTNBY: JUMPE T2,RTN ; Return if no more bytes left
ILDB T1,T3 ; Get a byte of event data
IDPB T1,P2 ; Store the byte
ADDI T4,1 ; Update the global count
SOJA T2,PUTNBY ; See if we have to put in more
;Put n (in T2) bytes of the number in T1.
PUTNBT: JUMPE T2,RTN ; Return if nothing left
IDPB T1,P2 ; Put the byte in the message
LSH T1,-^D8 ; Shift over to the next byte
ADDI T4,1 ; Update the count
SOJA T2,PUTNBT ; Do the rest
;Put one byte (in T1) into the data string for network management
PUTBYT: IDPB T1,P2 ; Install the byte
AOJA T4,RTN ; Increment the number of bytes
SUBTTL Miscellaneous routines -- Get a UN block
;GETUNB - Get a UN block
GETUNB: SYSPIF ; No interrupts please
SKIPN T1,DNDUNQ ; Any free blocks on the queue?
IFSKP.
MOVE T2,(T1) ; Yes, take the first one
MOVEM T2,DNDUNQ
SOS DNDUQL ; and account for it
ELSE.
SYSPIN
MOVX T1,UN.LEN ; Get length of user NI block
CALL DNGWDZ ; Try to get the words
RET ; Can't, return error
ENDIF.
SYSPIN
RETSKP ; Return address in T1
;Free a UN block.
;This means put it on the queue of free UN blocks or return it to the
; the free pool if the queue is at the desired maximum.
;Call:
; UN/ UN block address
FREUNB: MOVE T1,DNDUQL ; Get the length of the UN block queue
CAIG T1,6 ; Is it greater than the desired maximum?
IFSKP.
MOVE T1,UN ; Yes, the free the block
CALL DNFWDS
ELSE.
SYSPIF
MOVE T1,DNDUNQ ; No, get the queue head
MOVEM T1,(UN) ; and put this one at the head
MOVEM UN,DNDUNQ
AOS DNDUQL ; Add it into the count
SYSPIN
ENDIF.
RET
SUBTTL Miscellaneous routines -- Get emergency buffer
; Here when we couldn't get a buffer from the memory manager.
; Use the per-circuit emergency buffer, in case it's a
; important control message. Otherwise, return a zero in T1 for the DLL.
DNDGEB: TMNE DLEBU,(DL) ; Already using emergency buffer?
JRST DNDGE1 ; Yes, can't have another now
CALL DNGEMS ; Get one of the emergency message blocks
JRST DNDGE1 ; Couldn't get one
SETOM EMBFLG ; Set emergency buffer flag
SETONE DLEBU,(DL) ; Indicate we took an emergency buffer
RET
DNDGE1: SETZ T1, ; No buffer available
RET
SUBTTL Miscellaneous routines -- Check Ethernet address
;Call:
; UN/ UN block we can use
;Return:
; +1 If address is not DECnet's
; +2 If address is DECnets's
CHKADR: SKIPE DCNNIA ; Do we already have the address?
IFSKP. ; No, get it
SETZ T1, ; Use channel 0
STOR T1,UNCHN,(UN)
MOVX T1,NU.RCI ; Function is read channel information
MOVE T2,UN
CALL DLLUNI ; Call NISRV
RET
LOAD T1,UNCAR,(UN) ; Get hi-order of address
LOAD T2,UNCAR,+1(UN) ; and lo-order
DMOVEM T1,DCNNIA ; and save it
ELSE.
DMOVE T1,DCNNIA ; Get the current address
ENDIF.
CAMN T1,[%RTHIO] ; and see if it is DECnet's
CAME T2,RTRLOO
IFSKP.
SETONE LTCAD,(LT) ; Indicate channel address is DECnet
RETSKP
ELSE.
SETZRO LTCAD,(LT) ; Channel address is not DECnet's
RET ; No, then non-skip
ENDIF.
SUBTTL Local storage for DNADLL
RESDT
DNDINQ::XCDSEC,,QUEBLK ; Queue pointer - interrupt callback functions
DNDIWQ: XCDSEC,,QUEBLK+3 ; Queue pointer - working queue
QUEBLK: BLOCK 2*QH.LEN ; Space for callback functions & working queue
DLBQUE: BLOCK QH.LEN ; Queue of data link blocks
DNDUNQ: BLOCK 1 ; Queue of free UN blocks
DNDUQL: BLOCK 1 ; Length of UN block queue
DNDQBQ: BLOCK 1 ; Queue of free function blocks
DNDQBL: BLOCK 1 ; Length of QB queue
DNDRNT: BLOCK 1 ; Router's node type
EMBFLG: EXP 0 ; Flag someone is using emergency buffer
RCCFLG: EXP -1 ; Read couter complete flag for NIDLL
NIDLOK: EXP -1 ; Interlock so only one counter reader
DNDEVW: BLOCK 1 ; Event reason
ETHADR: BLOCK 2 ; Ethernet address for event data
DNDECP: EXP 0 ; Event communication pointer
INFPID: EXP 0 ; Informational portal ID
DCNNIA: BLOCK 2 ; DECnet Ethernet address
NIEMAF: BLOCK 1 ; Count of enable multicast failures
NIOPNF: BLOCK 1 ; Count of open failures
NPBERR: BLOCK 1 ; Count of failures posting buffer to NISRV
XRESCD
SUBTTL End of DNADLL
END