Google
 

Trailing-Edge - PDP-10 Archives - bb-m836c-bm_tops20_v6_1_tools - tools/sed/sed1sw.mac
There are 10 other files named sed1sw.mac in the archive. Click here to see a list.
TITLE	SED1SW - SED SWITCH ROUTINES
SUBTTL	A CHRISTOPHER HALL FECIT

	SEARCH	SEDSYM
	SALL

IFN TOPS10,<
	SEARCH	UUOSYM
	TWOSEG
	RELOC	400000
>
IFE TOPS10,<
	SEARCH	MONSYM
>

;HERE FOR THE COMMAND TO SET A NUMBER OF SWITCHES

SWITCH::MOVE	T1,PARPTR	;DID USER TYPE JUST ENTER SWITCH?
	CAME	T1,[POINT 7,PARBUF]
	CAMN	T1,[010700,,PARBUF-1]
	JRST	SWHSTS		;YES - GIVE HIM SOME STATUS INFORMATION
	PUSHJ	P,ERASPM	;ELSE ERASE PARAMETER
	SETZ	T1,		;END PARAMETER WITH A NULL
	IDPB	T1,PARPTR
	MOVE	PT,[POINT 7,PARBUF]
	MOVE	T3,PT
	ILDB	T1,T3		;GET FIRST CHARACTER
	CAIN	T1,"/"		;SUPERFLUOUS SLASH?
	MOVE	PT,T3		;YES - SKIP IT
	PUSHJ	P,SWHMNY	;HANDLE THE SWITCH(S) IN THE PARAMETER BUFFER
	JRST	DISCUR		;RE-POSITION CURSOR AND GET NEW COMMAND

;HERE ON SWITCH WITH NO PARAMETER: GIVE FILE STATUS

SWHNPM::PUSHJ	P,SWHBOT	;SET UP THE BOTTOM LINE
	MOVEI	T1,[ASCIZ /FILE: /]
	PUSHJ	P,PUTSTG
	MOVEI	T1,"*"		;GET FILE-IS-CHANGED FLAG
	TRNN	F,RDO		;IS FILE WRITEABLE,
	TLNN	F,CHG		;  AND HAS IT BEEN CHANGED?
	CAIA			;NOT WRITEABLE OR NOT CHANGED - SKIP THIS
	IDPB	T1,TY		;BOTH - OUTPUT THE FACT THAT IT'S CHANGED
	MOVEI	T1,FILSPC
	PUSHJ	P,PUTSTF

	PUSHJ	P,MAKCPT	;MAKE A GOOD CHARACTER POINTER
	MOVE	T2,RW		;SAVE REAL ROW POINTER
	MOVE	PT,[010700,,BUFFER-1]
	PUSHJ	P,FINDRW	;COUNT PAGES AND LINES FROM START OF BUFFER
	EXCH	T2,RW
	EXCH	T2,SAVEAC

	SKIPN	PAGFLG		;WANT BOTH PAGES AND LINES?
	JRST	SWHNP1		;NO - JUST LINES
	MOVEI	T1,[ASCIZ / PAGE: /]
	PUSHJ	P,PUTSTG
	MOVEI	T1,1(T3)	;GET PAGE NUMBER
	PUSHJ	P,PUTNUM	;OUTPUT PAGE
	MOVEI	T1,"-"
	IDPB	T1,TY
	AOS	T1,SAVEAC	;GET LINE NUMBER
	PUSHJ	P,PUTNUM	;OUTPUT IT
	JRST	SWHNP2		;SKIP LINES-ONLY STUFF

SWHNP1:	MOVEI	T1,[ASCIZ / LINE: /]
	PUSHJ	P,PUTSTG
	MOVEI	T1,1(T2)	;GET LINE NUMBER
	PUSHJ	P,PUTNUM	;OUTPUT IT

SWHNP2:	MOVEI	T1,"("
	IDPB	T1,TY
	HRRZ	T1,LINPTR	;GET OFFET OF PAGE INTO BUFFER
	SUBI	T1,BUFFER-1
	IMULI	T1,^D100	;TIMES 100
	HRRZ	T2,EN		;DIVIDED BY SIZE OF FILE
	SUBI	T2,BUFFER
	IDIV	T1,T2
	PUSHJ	P,PUTNUM	;OUTPUT PERCENT THROUGH FILE

	MOVEI	T1,[ASCIZ /%) POS: /]
	PUSHJ	P,PUTSTG
	MOVEI	T1,1(CM)	;OUTPUT COLUMN + SLIDE + 1
	ADD	T1,SL
	PUSHJ	P,PUTNUM
	SKIPN	OLDSPC		;GOT AN ALTERNATE FILE?
	JRST	SWHNPE		;NO - DON'T TALK ABOUT IT
	MOVEI	T1,[ASCIZ / ALT: /]
	PUSHJ	P,PUTSTG
	MOVEI	T1,OLDSPC
	PUSHJ	P,PUTSTF
SWHNPE::MOVEI	T1," "
	IDPB	T1,TY
	SETZ	T1,
	MOVE	T2,CPL.1	;GET TERMINAL WIDTH - 1
	SUBI	T2,3		;(IN CASE THE TTY COUNTS THE PROT'N CHARS)
IFN TOPS10,<
	IDIVI	T2,5		;FIND NUMBER OF WORDS + REMAINDER
	ADD	T2,[POINT 7,TYPBUF,6] ;ADJUST PTR TO THE RIGHT WIDTH
	HRL	T2,PTRTBL+1(T3)
>
IFE TOPS10,<
IFN FTECHO,<
	ADJBP	T2,[POINT 8,TYPBUF,7]
>
IFE FTECHO,<
	ADJBP	T2,[POINT 7,TYPBUF,6]
>>
	DPB	T1,T2		;MAKE MESSAGE END AT WIDTH - 1
	PUSHJ	P,PUTTYP	;OUTPUT THE TEXT
	PUSHJ	P,PROTOF	;TURN PROTECTION OFF
	TLO	F,FBL		;SAY BOTTOM LINE HAS BEEN FRAGGED
	JRST	DISCUR		;RE-POSITION CURSOR AND RETURN

;SUBROUTINE TO SET UP THE BOTTOM OF THE SCREEN FOR THE SWITCH COMMAND ETC.

SWHBOT::PUSHJ	P,RESTPM	;CLEAN UP THE PARAMETER ENTRY
	PUSHJ	P,CBOTOM	;PUT MESSAGE ON BOTTOM LINE
	PUSHJ	P,PROTON	;PROTECTED
	JRST	PUTTYP		;OUTPUT POSITIONING NOW AND RETURN

;HERE ON TOKEN SWITCH (ENTER, BUT NO PARAMETER): GIVE NOMINAL SETTINGS

SWHSTS:	PUSHJ	P,SWHBOT	;SET UP THE BOTTOM LINE
	MOVEI	T1,[ASCIZ / RL:/]
	PUSHJ	P,PUTSTG
	MOVE	T1,ROLLIN	;OUTPUT NUMBER OF LINES TO ROLL
	PUSHJ	P,PUTNUM
	MOVEI	T1,[ASCIZ / RP:/]
	PUSHJ	P,PUTSTG
	MOVE	T1,ROLPGS	;OUTPUT NUMBER OF PAGES TO ROLL
	PUSHJ	P,PUTNUM
	MOVEI	T1,[ASCIZ / PC:/]
	PUSHJ	P,PUTSTG
	MOVE	T1,GOPERC	;OUTPUT PERCENT-GOTO NOMINAL
	PUSHJ	P,PUTNUM
	MOVEI	T1,[ASCIZ / SL:/]
	PUSHJ	P,PUTSTG
	MOVE	T1,SLIDES	;OUTPUT SIZE OF SLIDE
	PUSHJ	P,PUTNUM
	MOVEI	T1,[ASCIZ / IL:/]
	PUSHJ	P,PUTSTG
	MOVE	T1,ADDLNS	;OUTPUT NUMBER OF LINES TO INSERT/DELETE
	PUSHJ	P,PUTNUM
	SKIPN	T1,ADDLSP	;GOT SPACES TO GO WITH THOSE LINES?
	JRST	SWHST1		;NO - SKIP OUTPUT
	MOVEI	T1,","
	IDPB	T1,TY
	MOVE	T1,ADDLSP	;AND SPACES TO GO WITH THOSE LINES
	PUSHJ	P,PUTNUM
SWHST1:	MOVEI	T1,[ASCIZ / IS:/]
	PUSHJ	P,PUTSTG
	MOVE	T1,ADDSPC	;OUTPUT NUMBER OF SPACES TO INSERT/DELETE
	PUSHJ	P,PUTNUM
	MOVEI	T1,[ASCIZ / PK:/]
	PUSHJ	P,PUTSTG
	MOVE	T1,PICKLN	;OUTPUT NUMBER OF LINES TO PICK
	PUSHJ	P,PUTNUM
	SKIPN	T1,PICKSP	;GOT SPACES TO GO WITH THOSE LINES?
	JRST	SWHST2		;NO - SKIP OUTPUT
	MOVEI	T1,","
	IDPB	T1,TY
	MOVE	T1,PICKSP	;AND SPACES TO PICK, TOO
	PUSHJ	P,PUTNUM

SWHST2:	MOVEI	T1,[ASCIZ / CS:/]
	PUSHJ	P,PUTSTG
	SKIPN	T1,CASLNS	;CHANGING THE CASE OF ANY LINES?
	JRST	SWHS2A		;NO - SKIP OUTPUT
	PUSHJ	P,PUTNUM	;YES - OUTPUT THEM AND A COMMA
	MOVEI	T1,","
	IDPB	T1,TY
SWHS2A:	MOVE	T1,CASSPS	;OUTPUT NUMBER OF CHARS TO CHANGE CASE OF
	PUSHJ	P,PUTNUM

	MOVEI	T1,[ASCIZ / SU:/]
	PUSHJ	P,PUTSTG
	MOVE	T1,SUBCNT	;OUTPUT NUMBER OF SUBSTITUTES TO DO
	PUSHJ	P,PUTNUM

	HLRZ	T1,ISVNUM	;GOT AN INCREMENTAL SAVE?
	JUMPN	T1,SWHST3	;NO
	MOVEI	T1,[ASCIZ / ISV:/]
	PUSHJ	P,PUTSTG
	MOVE	T1,ISVNUM
	PUSHJ	P,PUTNUM
SWHST3:	HLRZ	T1,SAVNUM	;GOT AN INCREMENTAL TYPEIN SAVE?
	JUMPN	T1,SWHST4	;NO
	MOVEI	T1,[ASCIZ / SV:/]
	PUSHJ	P,PUTSTG
	MOVE	T1,SAVNUM
	PUSHJ	P,PUTNUM
SWHST4:	SKIPG	LMARGN		;GOT A CHANGED LEFT MARGIN?
	JRST	SWHST5		;NO
	MOVEI	T1,[ASCIZ / LM:/]
	PUSHJ	P,PUTSTG
	MOVE	T1,LMARGN
	PUSHJ	P,PUTNPO
SWHST5:	MOVE	T1,RMARGN	;GOT A RIGHT MARGIN WITHIN THE SCREEN?
	CAML	T1,CPL.1
	JRST	SWHST6		;NO
	MOVEI	T1,[ASCIZ / RM:/]
	PUSHJ	P,PUTSTG
	MOVE	T1,RMARGN
	PUSHJ	P,PUTNPO
SWHST6:	MOVEI	T1,[ASCIZ / TB:/]
	PUSHJ	P,PUTSTG	;OUTPUT SIZE OF TAB
	TRNE	F,WTB		;GOT WORD-WISE TABS?
	JRST	SWHS6W		;YES - CALL THEM SIZE "W" (RETURN TO SWHST7)
	TLNE	TM,STB		;GOT SETTABLE TABS?
	JRST	SWHS6S		;YES - CALL THEM SIZE "S" (RETURN TO SWHST7)
	MOVE	T1,TABLEN	;NO - OUTPUT SIZE OF TAB
	PUSHJ	P,PUTNUM
SWHST7:	SKIPN	SRCKEY		;GOT A SEARCH KEY?
	JRST	SWHST8		;NO
	MOVEI	T1,[ASCIZ / KEY:/]
	PUSHJ	P,PUTSTG
	MOVEI	T1,SRCKEY
	PUSHJ	P,PUTSTC
SWHST8:	SKIPN	SUBSTG		;GOT A SUBSTITUTE STRING?
	JRST	SWHNPE		;NO
	MOVEI	T1,[ASCIZ / RPL:/]
	PUSHJ	P,PUTSTG
	MOVEI	T1,SUBSTG
	PUSHJ	P,PUTSTC
	JRST	SWHNPE		;FINISH OFF

SWHS6W:	SKIPA	T1,["W"]	;CALL WORD-WISE TABS SIZE "W"
SWHS6S:	MOVEI	T1,"S"		;CALL SETTABLE TABS SIZE "S"
	IDPB	T1,TY
	JRST	SWHST7
;SWITCH HANDLING SUBROUTINES. THERE BE:
;SWHMNY - HANDLES A STRING OF SWITCHES. PT POINTS TO START OF FIRST ONE
;SWHONE - HANDLES A SINGLE SWITCH IN PARBUF

;MANY SWITCHES: FIND CHARACTER AFTER NEXT SWITCH; SAVE IT; REPLACE IT
;		WITH A NULL; CALL SWHONE; LOOP
;SWITCHES END WITH A RETURN OR A NULL
;CALL WITH PT POINTING AFTER THE "/" OF THE FIRST SWITCH

;FOR NON-EXECUTE SWITCHES, ^ANYTHING IS A REAL ANYTHING, AND THE UP-ARROW
;IS IGNORED (USEFUL FOR ^/ AND ^^).

SWHMNY::MOVEM	PT,SAVEAC+4	;SAVE THE POINTER TO THE START OF THE SWITCH
SWHMN1:	ILDB	T1,PT		;GET FIRST SWITCH CHARACTER
	CAIE	T1,"X"		;EXECUTE SWITCH?
	CAIN	T1,"x"
	JRST	SWHMNX		;YES - SPECIAL CASE
	PUSHJ	P,SWHNUL	;NO - FIND, SAVE, AND NULL CHAR. AFTER THE SWH
	PUSHJ	P,SWHONE	;NO - PROCESS THE SWITCH
SWHMN2:	MOVE	PT,SAVEAC+4	;POINT TO THE START OF THE NEXT ONE
	SKIPN	SAVEAC+5	;GOT MORE SWITCHES?
	POPJ	P,		;NO - DONE
	JRST	SWHMN1		;YES - LOOP TO PROCESS THEM

SWHMN3:	JUMPN	T1,SWHMN1	;JUMP IF GOT MORE SWITCHES
	POPJ	P,		;ELSE DONE

;SUBROUTINE TO FIND THE FIRST CHARACTER OF THE NEXT SWITCH,
;SAVE IT AND ITS POINTER IN SAVEAC+5 AND +4, AND CHANGE IT TO A NULL

SWHNUL:	ILDB	T1,PT		;GET THE NEXT CHARACTER
	CAIN	T1,"^"		;WANT TO FORCE THE NEXT CHARACTER?
	JRST	[ILDB T1,PT	;YES - SKIP OVER IT
		 JRST SWHNUL]	;AND GET THE NEXT ONE
	CAIL	T1,"0"		;IS THE CHARACTER INTERESTING?
	JRST	SWHNUL		;NO - JUST SKIP OVER IT
	JUMPE	T1,SWHNL1	;YES - DONE IF NULL
	CAIN	T1,15		;END OF A LINE?
	JRST	SWHMNS		;YES - SKIP TO LINEFEED AND RETURN
	CAIE	T1,"/"		;START OF ANOTHER SWITCH?
	CAIN	T1,"+"
	TDZA	T0,T0		;YES - GET A NULL AND SKIP
	JRST	SWHNUL		;NO - KEEP SKIPPING
	DPB	T0,PT		;NULL OUT THE CHARACTER
SWHNL1:	EXCH	PT,SAVEAC+4	;SAVE PTR TO NEXT SWITCH; GET PTR TO THIS ONE
	MOVEM	T1,SAVEAC+5	;SAVE THE CHARACTER
	POPJ	P,		;DONE

SWHMNS:	SETZ	T1,		;NULL OUT THE CARRIAGE RETURN
	DPB	T1,PT
SWHMS1:	ILDB	T0,PT		;SKIP UNTIL NULL OR LINEFEED
	JUMPE	T0,SWHNL1	;IF NULL, SAVE POINTERS AND FINISH
	CAIN	T0,12		;LINEFEED?
	JRST	SWHNL1		;YES - FINISH OFF
	JRST	SWHMS1		;ELSE KEEP LOOKING

;HERE TO HANDLE THE EXECUTE SWITCH SEPARATELY

SWHMNX:	MOVE	T3,[POINT 7,PARBUF]
	IDPB	T1,T3		;SAVE THE "X"
	ILDB	T1,PT		;SKIP THE COLON AFTER THE "X"
	CAIE	T1,":"		;  (IF THERE IS ONE)
	JRST	SWMXL2
	JRST	SWMXL1

SWHMXL:	IDPB	T1,T3
SWMXL1:	ILDB	T1,PT		;SAVE BUFFER NAME IN PARM BUFFER
SWMXL2:	JUMPE	T1,SWHMN3	;NULL - IGNORE THIS BAD FORMAT
	CAIN	T1,15		;START OF ANOTHER SWITCH?
	JRST	SWHMN3		;YES - IGNORE THIS BAD FORMAT
	CAIN	T1,","		;START OF KEYSTROKE SEQUENCE?
	JRST	SWHMX0		;YES - SET FLAG FOR IT
	CAIE	T1,":"		;START OF CONTENTS?
	JRST	SWHMXL		;NO - KEEP GOING

	TDZA	T1,T1		;CLEAR T1 - NO KEYSTROKE COMING
SWHMX0:	MOVSI	T1,-1		;T1/-1,,0 - KEYSTROKE COMING
	MOVEM	T1,SAVEAC+3	;SAVE KEYSTROKE FLAG
	TLO	F,FLG		;SET TO GET A RETURN FROM XCT ROUTINES
	IDPB	T1,T3		;END PARM BUFFER WITH A NULL
	MOVEM	PT,SAVEAC+4	;SAVE POINTER
	PUSHJ	P,XCTSET	;SET UP THAT BUFFER
	MOVE	PT,SAVEAC+4	;RESTORE POINTER
	SKIPE	SAVEAC+3	;NOW GOT A KEYSTROKE SEQUENCE?
	PUSHJ	P,SWHMXK	;YES - GET KEYSTROKE, TOO

;FIND END OF SWITCH. SAVE IT AND REPLACE IT WITH A NULL.

	MOVEM	PT,SAVEAC+4	;SAVE POINTER TO START OF SEQUENCE
SWHMX1:	ILDB	T1,PT		;GET THE NEXT CHARACTER
	CAIN	T1,"/"		;START OF A NEW SWITCH?
	JRST	SWHMX2		;YES - SET UP CONTENTS
SWMX1A:	JUMPE	T1,SWMX1E	;NULL - TREAT LIKE END OF LINE
	CAIN	T1,15		;END OF LINE?
	JRST	SWMX1E		;YES - SEE IF END OF BUFFER
	CAIE	T1,"^"		;NO - SPECIAL FLAG?
	JRST	SWHMX1		;NO - CONTINUE
	ILDB	T1,PT		;YES - GET NEXT CHARACTER
	CAIE	T1,"/"		;IS IT A REAL SLASH?
	JRST	SWMX1A		;NO - JUST PROCESS NORMALLY
	DPB	T1,T3		;YES - SAVE OVER THE UP-ARROW
	JRST	SWHMX1		;AND THEN CONTINUE

SWMX1E:	ILDB	T1,PT		;END OF A LINE - GET THE LINEFEED
	MOVE	T0,PT		;SAVE THE CURRENT POINTER
	CAIN	T1,12		;IS IT REALLY A LINEFEED?
	ILDB	T1,PT		;YES - GET FIRST CHARACTER OF NEXT LINE
	CAIN	T1,11		;IS IT A TAB?
	JRST	SWHMX1		;YES - IGNORE CRLF AND TAB AND CONTINUE
	MOVE	PT,T0		;NO - END OF THIS DEFINITION - GET POINTER BACK
	SETZ	T1,		;SAVE A NULL AS THE TERMINATOR

SWHMX2:	MOVEM	T1,SAVEAC+5	;SAVE TERMINATING CHARACTER
	SETZ	T1,		;COVER THE TERMINATOR WITH A NULL
	DPB	T1,PT
SWHMX3:	EXCH	PT,SAVEAC+4	;SAVE PTR TO END OF SWITCH; GET PTR TO START
	TLO	F,FLG		;SET FLAG TO GET A RETURN
	PUSHJ	P,XCWRT0	;WRITE THE BUFFER
	JRST	SWHMN2		;FINISH OFF OR PROCESS NEXT SWITCH

;HERE TO READ AND SAVE THE EXECUTE KEY SEQUENCE

SWHMXK:	MOVEI	T4,XCTKEY(T1)	;GET POINTER TO PLACE TO STORE SEQUENCE
	HRLI	T4,440700	;(INDEPENDENT OF T1)
	MOVEM	T4,SAVEAC+5	;SAVE POINTER FOR LATER
	SETZM	XCTKEY(T1)	;CLEAR PREVIOUS KEYSTROKE (IF ANY)
	TRO	T1,200000	;SET EXECUTE COMMAND FLAG
	MOVEM	T1,SAVEAC+6	;SAVE EXECUTE BUFFER INDEX
SWMXK1:	ILDB	T0,PT		;GET CHARACTER OF SEQUENCE
	CAIN	T0,":"		;START OF CONTENTS?
	JRST	SWMXK2		;YES - SEE IF COMMAND IS LEGAL
	JUMPE	T0,SWHMN3	;NULL - IGNORE THIS BAD FORMAT
	CAIN	T0,15		;START OF ANOTHER SWITCH?
	JRST	SWHMN3		;YES - IGNORE THIS BAD FORMAT
	CAIN	T0,"^"		;CONTROL CHARACTER IN SEQUENCE?
	PUSHJ	P,SWMXKC	;YES - FIND WHICH CHARACTER IT SHOULD BE
	TLNE	T4,760000	;ALREADY GOT 5 CHARACTERS?
	IDPB	T0,T4		;NO - SAVE CHARACTER
	JRST	SWMXK1		;AND GET ANOTHER

;SUBROUTINE TO READ THE CHARACTER AFTER AN "^". IT'S EITHER A CONTROL
;CHARACTER, A RUBOUT, OR A REAL "^" OR ":"

SWMXKC:	ILDB	T0,PT		;GET THE NEXT CHARACTER
	CAIN	T0,"?"		;WANT A RUBOUT?
	JRST	SWMXC1		;YES - SET IT UP
	CAIN	T0,"="		;WANT A REAL UP-ARROW?
	JRST	SWMXC2		;YES (NOTE: ^^ IS A CONTROL CHARACTER)
	CAIE	T0,":"		;WANT A REAL COLON?
	ANDI	T0,37		;NO - MAKE THE CHARACTER A CONTROL CHARACTER
	POPJ	P,		;DONE

SWMXC1:	TROA	T0,177		;MAKE ^? BE A RUBOUT
SWMXC2:	MOVEI	T0,"^"		;MAKE ^= BE A REAL UP-ARROW
	POPJ	P,		;DONE

;HERE WHEN COMMAND DEFINITION IS COMPLETE. NOW SEE IF IT'S LEGAL

SWMXK2:	SKIPE	STTFLG		;INITIALIZING?
	POPJ	P,		;YES - DON'T CHANGE TABLE NOW
	MOVE	T2,SAVEAC+5	;NO - GET POINTER TO SEQUENCE
				;FALL TO CHANGE TABLE AND RETURN

;SUBROUTINE TO CHANGE INPUT TABLE - SET UP OR CLEAR EXECUTE COMMAND
;ENTER WITH EXECUTE INDEX IN SAVEAC+6, POINTER TO EXECUTE SEQUENCE IN T2
;INDEX SHOULD HAVE THE 200000 BIT SET
;IF INDEX IS -1, EDITOR COMMAND IS RESTORED IN TABLE

SUBTBX::MOVEM	T2,SAVEAC+7	;SAVE THE POINTER TO THE SEQUENCE
	ILDB	T4,T2		;GET FIRST CHARACTER
	CAIN	T4,177		;RUBOUT?
	SETO	T4,		;YES - USE -1 AS OFFSET
	ADD	T4,ITB(TM)	;GET OFFSET IN TERMINAL TABLE
	MOVE	T1,T4		;REMEMBER TABLE ADDRESS
	SKIPGE	T4,(T4)		;IS IT A NORMAL COMMAND?
	JRST	SUBTAS		;NO - GO LOOK IN SUBTABLE
	ILDB	T0,T2		;YES - GET NEXT COMMAND CHARACTER
	SKIPGE	T2,SAVEAC+6	;GET EXECUTE INDEX - NEGATIVE?
	JRST	SUBTX1		;YES - GO RESTORE OLD COMMAND

	TRNE	T4,200000	;WAS SEQUENCE ALREADY SET UP AS AN EXECUTE?
	AOJA	T4,SUBTX0	;YES - BUMP COUNTER AND SAVE
	CAIE	T0,0		;IS EXECUTE SEQUENCE 1 CHARACTER LONG?
	MOVEI	T2,300000	;NO - SET FLAG FOR MORE INPUT & ZERO COUNTER
	DPB	T4,[POINT 9,T2,29]
	MOVEM	T2,(T1)		;NO - SAVE EXECUTE CALL NOW

;NOW CONVERT ALL LOWER CASE CHARACTERS IN THE SEQUENCE TO UPPER CASE

SUBTBR:	SKIPGE	SAVEAC+6	;REMOVING THE DEFINITION?
	POPJ	P,		;YES - DONE
	MOVE	T2,SAVEAC+7	;NO - GET THE POINTER TO THE SEQUENCE
SUBTR1:	ILDB	T1,T2		;CONVERT LOWER TO UPPER CASE - GET A CHARACTER
	JUMPE	T1,CPOPJ	;DONE IF NULL
	CAIL	T1,"a"		;ELSE IS IT LOWER CASE?
	CAILE	T1,"z"
	JRST	SUBTR1		;NO - SKIP THIS CHARACTER
	SUBI	T1,40		;YES - CONVERT TO UPPER
	DPB	T1,T2		;SAVE IT BACK
	JRST	SUBTR1		;AND LOOK AT THE NEXT CHARACTER

SUBTX0:	MOVEM	T4,(T1)		;SAVE EXECUTE CALL WITH BUMPED COUNTER
	JRST	SUBTBR		;DONE

SUBTX1:	TRNN	T4,100000	;GOT AT LEAST TWO COMMANDS FOR THIS SEQUENCE?
	JRST	SUTX1A		;NO
	TRNE	T4,77
	SOJA	T4,SUTX1B	;YES - JUST DECREMENT COUNT AND SAVE
SUTX1A:	TRZ	T4,300000	;GET ORIGINAL COMMAND BACK
	LSH	T4,-6
SUTX1B:	MOVEM	T4,(T1)		;SAVE IT
	POPJ	P,		;DONE

SUBTAS:	ILDB	T0,T2		;GET NEXT USER-TYPED CHARACTER
SUBTS2:	SKIPN	T1,(T4)		;GET A SUBTABLE ENTRY - END?
	JRST	SUBTBR		;DONE
	TRNN	T1,-1		;MATCH ON ANY CHARACTER?
	JRST	SUBTS3		;YES - SET UP REAL COMMAND NOW
	CAIE	T0,(T1)		;DO USER'S AND TABLE'S CHARS MATCH?
	AOBJN	T4,SUBTS2	;NO - LOOP ON THE TABLE
	JUMPG	T4,SUBTBR	;NOT LEGAL IF END OF TABLE AND NOT FOUND
SUBTS3:	CAMLE	T1,[137,,0]	;ELSE FOUND - WANT ANOTHER LEVEL?
	JRST	SUBTSS		;YES - SET IT UP
SBTS3A:	HLR	T1,(T4)		;NO - GET CURRENT POINTER
	MOVE	T0,SAVEAC+6	;GET EXECUTE INDEX
	JUMPL	T0,SUBTS4	;IF NONE RESTORE OLD COMMAND
	TRNE	T1,200000	;WAS THIS ALREADY SET UP AS AN EXECUTE?
	AOJA	T1,SUBTSX	;YES - BUMP COUNTER AND SAVE
	HLR	T1,T1		;ELSE SAVE OLD COMMAND WITH EXECUTE INDEX
	DPB	T1,[POINT 9,T0,29]
	HRLM	T0,(T4)		;SAVE INDEX AT END OF SUBTABLE
	JRST	SUBTBR		;DONE

SUBTSX:	TRNE	T1,100000	;MORE THAN ONE COMMAND HERE ALREADY?
	JRST	SUTSX1		;YES - JUST SAVE BUMPED COUNTER
	TRO	T1,300001	;NO - THERE IS NOW (SET FLAG, CLEAR COUNTER)
	TRZ	T1,76
SUTSX1:	HRLM	T1,(T4)		;SAVE INDEX AT END OF SUBTABLE
	JRST	SUBTBR		;DONE

SUBTS4:	TRNN	T1,100000	;GOT AT LEAST TWO COMMANDS FOR THIS SEQUENCE?
	JRST	SUTS4A		;NO
	TRNE	T1,77
	SOJA	T1,SUTS4B	;YES - DECREMENT COUNTER AND SAVE
SUTS4A:	LSH	T1,-6		;GET ORIGINAL COMMAND BACK
	TRZ	T1,777000
SUTS4B:	HRLM	T1,(T4)		;SAVE IT IN THE SUBTABLE
	POPJ	P,		;DONE

SUBTSS:	TLZE	T1,200000	;GOT AN EXECUTE COMMAND?
	JRST	SBTS3A		;YES - SET IT UP AFTER ALL
	HLRZ	T4,T1		;POINT TO NEW SUBTABLE
	HRLI	T4,-^D40
	JRST	SUBTAS		;AND PICK UP ANOTHER CHARACTER

;SUBROUTINE TO SET UP ALL EXECUTE BUFFER BUTTON SEQUENCES IN THE
;TERMINAL INPUT TABLE. THIS IS DONE ON STARTUP IN CASE THE TABLE WAS
;CHANGED AFTER SWITCH.INI WAS PROCESSED, BY THE USER'S ENTRY ROUTINE

SETXCB::MOVEI	DO,XBFNUM-1	;LOOP THROUGH ALL EXECUTE BUFFERS
STXCB1:	SKIPN	XCTKEY(DO)	;DOES THIS BUFFER HAVE A BUTTON?
	JRST	STXCB2		;NO - SKIP IT
	MOVEI	T2,200000(DO)	;YES - SET UP EXECUTE INDEX AND POINTER
	MOVEM	T2,SAVEAC+6
	ADD	T2,[440677,,XCTKEY-200000]
	PUSHJ	P,SUBTBX	;CHANGE TABLE IF THE COMMAND IS LEGAL
STXCB2:	SOJGE	DO,STXCB1	;LOOP THROUGH ALL BUFFERS
	POPJ	P,		;THEN DONE

;SUBROUTINE TO PARSE AND HANDLE A SINGLE SWITCH, WHICH IS IN PARAMETER BUFFER.
;ENTER WITH PT/ POINTER TO SWITCH. THE SWITCH MUST BE TERMINATED BY A NULL.

SWHONE::SETO	T4,		;ASSUME SWITCH WILL BE SET
SWHON1:	PUSHJ	P,SWHLUR	;GET FIRST CHARACTER
SWHON2:	CAIL	T1,"A"		;IS IT ALPHABETIC?
	CAILE	T1,"Z"
	JRST	SWHERR		;NO - ERROR
	MOVE	T2,T1		;YES - SAVE FIRST CHARACTER
	PUSHJ	P,SWHLUR	;GET SECOND CHARACTER
	JRST	@SWHADR-"A"(T2)	;AND DISPATCH TO SWITCH ROUTINE

SWHNNN:	SETZ	T4,		;SAY "NO" HAS BEEN TYPED
	CAIN	T1,"O"		;IS 2ND CHARACTER AN "O"?
	JRST	SWHON1		;YES - INGORE IT
	JRST	SWHON2		;NO - DISPATCH ON IT

;SUBROUTINE TO READ THE NEXT SWITCH CHARACTER. DOESN'T RAISE CASE
;AND DOESN'T SKIP SPACES AND TABS.

SWHLRX:	ILDB	T1,PT		;GET THE NEXT CHARACTER
	JRST	SWHLR1		;CHECK THE USUAL THINGS AND RETURN

;SUBROUTINE TO READ THE NEXT SWITCH CHARACTER. CONVERTS LOWER TO UPPER CASE

SWHLUR::ILDB	T1,PT		;GET THE NEXT CHARACTER
	CAIE	T1,11		;IS IT A TAB,
	CAIN	T1," "		;  OR A SPACE?
	JRST	SWHLUR		;YES - IGNORE IT
	CAIL	T1,"a"		;LOWER CASE?
	SUBI	T1,40		;YES - CONVERT TO UPPER
SWHLR1:	CAIN	T1,"^"		;WANT TO FORCE THE NEXT CHARACTER?
	ILDB	T1,PT		;YES - GET IT
	POPJ	P,		;RETURN

;ROUTINES TO HANDLE EACH SWITCH
;2ND SWITCH CHARACTER IS IN T1; POPJ WHEN DONE

SWHAAA:	CAIN	T1,"G"		;AGAIN SWITCH?
	JRST	SWHAGN		;YES - HANDLE IT
	CAIN	T1,"P"		;APPEND SWITCH?
	JRST	SWHAPP		;YES - HANDLE IT
	CAIE	T1,"L"		;ALTERNATE FILE SWITCH?
	JRST	SWAERR		;NO - IT'S AMBIGUOUS
	CAIE	DO,$SETFI	;DOING A SET-FILE,
	CAIN	DO,$SWTCH	;  OR A SWITCH COMMAND?
	JRST	SALERR		;YES - SWITCH IS ILLEGAL, THEN
	MOVEI	T1,SPCSIZ-1
	MOVE	T0,FILSPC(T1)	;NO - SWAP CURRENT AND ALTERNATE FILESPECS
	EXCH	T0,OLDSPC(T1)
	MOVEM	T0,FILSPC(T1)
	SOJGE	T1,.-3
	JRST	SWHAN1		;IF THERE'S AN ARGUMENT, SET IT UP

SWHAGN:	SKIPE	CRRFLG		;HAS THE RCUR FLAG BEEN GIVEN?
	JRST	SWMERR		;YES - CAN'T MIX RCUR AND AGAIN
	SETOM	AGNFLG		;SET THE AGAIN FLAG TO SET TO SAME FILE TWICE
SWHAN1:	PUSHJ	P,SWHAG0	;READ ARGUMENT, IF ANY
	  POPJ	P,		;NO ARG - JUST RETURN
	JRST	SWHPC1		;ARGUMENT - SET UP PERCENT-GOTO

SWHAPP:	CAIE	T4,0		;WANT TO APPEND?
	MOVE	T4,[POINT 7,PIKBUF] ;YES - RESET THE APPEND POINTER
	MOVEM	T4,APPFLG	;SAVE 0 OR APPEND POINTER
	POPJ	P,

SWHUPP:	MOVEM	T4,UPPFLG	;SAVE UPPER-LOWER CASE FLAG
	POPJ	P,

SWHCCC:	CAIN	T1,"R"		;ALWAYS-CREATE SWITCH?
	JRST	SWHCRE		;YES - HANDLE IT
	CAIE	T1,"A"		;AFFECT CASE-DEPENDENCY OF SEARCHING?
	JRST	SWAERR		;NO - IT'S AMBIGUOUS
	CAIGE	T4,0		;YES - MAKE SEARCHES CASE-DEPENDENT?
	TRZA	F,NLC		;YES
	TRO	F,NLC		;NO
	POPJ	P,

SWHCRE:	MOVEM	T4,CREFLG	;SAVE ALWAYS-CREATE-FILE FLAG
	POPJ	P,

SWHSSS:	CAIN	T1,"L"		;SLIDE SWITCH?
	JRST	SWHSLD		;YES - HANDLE IT
	CAIN	T1,"H"		;SHOW EXECUTE SWITCH?
	JRST	SWHSHW		;YES - HANDLE IT
	CAIN	T1,"A"		;SAVE SWITCH?
	JRST	SWHSAV		;YES - HANDLE IT
	CAIN	T1,"C"		;SCROLL-ON-CURSOR-MOVE SWITCH?
	JRST	SWHSCR		;YES - HANDLE IT
	CAIE	T1,"T"		;STRIP LINE NUMBERS SWITCH?
	JRST	SWAERR		;NO - IT'S AMBIGUOUS
	MOVEM	T4,STRFLG	;YES - SAVE STRIP FLAG
	POPJ	P,

SWHSHW:	MOVEM	T4,XSHFLG	;SAVE SHOW FLAG
	POPJ	P,

SWHSCR:	MOVEM	T4,RLCFLG	;SAVE SCROLL-ON-CURSOR-MOVE FLAG
	POPJ	P,

SWHSLD:	JUMPE	T4,SWHSL2	;IF /NOSLIDE DISABLE SLIDING (IGNORE ARG)
	PUSHJ	P,SWHAG0	;ELSE SEE IF THERE'S AN ARGUMENT
	  JRST	SWHSL2		;NO - JUST ENABLE SLIDING
	JUMPLE	T3,SWHSL1	;TREAT /SLIDE:0 LIKE /NOSLIDE
	MOVEM	T3,SLIDNM	;SET UP THE ARGUMENT AS THE NEW NOMINAL
	MOVEM	T3,SLIDES	;  AND CURRENT SLIDE DISTANCES
	SKIPA	T4,[-1]		;ENABLE SLIDING AND RETURN
SWHSL1:	SETZ	T4,		;DISABLE SLIDING
SWHSL2:	MOVEM	T4,SLDFLG	;SAVE SLIDE FLAG
	POPJ	P,

SWHSAV:	JUMPE	T4,SWHSV1	;JUMP IF USER SAID /NOSAVE
	PUSHJ	P,SWHAG0	;ELSE READ ARGUMENT
	  JRST	SWGERR		;NO ARG - ERROR
	CAIG	T3,0		;DID USER SAY /SAVE:0?
SWHSV1:	HRLO	T3,P		;YES - USE A LARGE NUMBER (FOR NO SAVES)
	MOVEM	T3,SAVNUM	;ELSE SAVE # COMMANDS BETWEEN SAVES
	MOVEM	T3,SAVCNT	;SAVE AS COUNTDOWN VALUE, TOO
	POPJ	P,

SWHBBB:	CAIN	T1,"E"		;BEEP SWITCH?
	JRST	SWHBEP		;YES - HANDLE IT
	CAIE	T1,"A"		;BACKUP SWITCH?
	JRST	SWAERR		;NO - IT'S AMBIGUOUS
	MOVEM	T4,BAKFLG	;YES - SAVE BACKUP FILE FLAG
	POPJ	P,

SWHBEP:	CAIE	T4,0		;SET BEEP-ON-INSERT-MODE FLAG?
	TLOA	TM,BEP		;YES
	TLZ	TM,BEP		;NO
	POPJ	P,

SWHRRR:	CAIN	T1,"A"		;RAISE SWITCH?
	JRST	SWHRAI		;YES - HANDLE IT
	CAIN	T1,"E"		;RESET, READ-ONLY OR RECOVER SWITCH?
	JRST	SWHRR1		;YES - READ ANOTHER CHARACTER
	CAIN	T1,"M"		;RMAR (RIGHT MARGIN) SWITCH?
	JRST	SWHRMR		;YES
	CAIN	T1,"C"		;REPLACE-CURRENT FILE SWITCH?
	JRST	SWHCUR		;YES - HANDLE IT
	CAIE	T1,"O"		;ROLL SWITCH?
	JRST	SWAERR		;NO - IT'S AMBIGUOUS
	CAIGE	T4,0		;ROLL IF USER TYPES RETURN ON BOTTOM LINE?
	TRZA	F,NRC		;NO
	TRO	F,NRC		;YES
	POPJ	P,

SWHRAI:	SETCAM	T4,UPCFLG	;SAVE RAISE-CASE FLAG
	SETOM	INVFLG		;DON'T TOGGLE; USE UPCFLG
	POPJ	P,

SWHCUR:	SKIPE	AGNFLG		;IS THE AGAIN FLAG SET?
	JRST	SWMERR		;YES - CAN'T MIX RCUR AND AGAIN
	MOVEM	T4,CRRFLG	;SAVE REPLACE-CURRENT-FILE FLAG
	POPJ	P,

SWHRMR:	PUSHJ	P,SWHAG0	;READ NEW RMAR (RIGHT MARGIN) POSITION
	  JRST	SWGERR		;NO ARG - ERROR
	SOJ	T3,		;MAKE THE VALUE ZERO-ORIGIN
	CAMG	T3,LMARGN	;IS IT TO THE RIGHT OF THE LEFT MARGIN?
	JRST	SWGERR		;NO - ERROR
	MOVEM	T3,RMARGN	;YES - SAVE IT
IFE TOPS10,<
IFN FTECHO,<
SWHRM1::CAML	T3,CPL.1	;OFF THE RIGHT OF THE SCREEN?
	SKIPA	T3,CPL.0	;YES - SET THE FIELD WIDTH TO THE RIGHT
	AOJ	T3,
	MOVEM	T3,FLDWTH	;SAVE THE FIELD WIDTH
>>
	POPJ	P,

SWHRR1:	PUSHJ	P,SWHLUR	;GET 3RD SWITCH CHARACTER
	CAIN	T1,"A"		;REA == READ-ONLY?
	JRST	SWHRDO		;YES
IFN FTJOUR,<
	CAIN	T1,"C"		;REC == RECOVER JOURNAL?
	JRST	SWHREC		;YES
>
	CAIE	T1,"S"		;RES == RESET NOMINALS?
	JRST	SWAERR		;NO - IT'S AMBIGUOUS OR ILLEGAL
	CAIE	T4,0		;SET RESET-NOMINALS FLAG?
	TROA	F,RST		;YES
	TRZA	F,RST		;NO
	JRST	RSTNOM		;IF YES, RESET ALL NOMINALS NOW AND RETURN
	POPJ	P,		;IF NO, JUST RETURN

IFE FTJOUR,<
SWHJJJ:	JRST	SWHJHD		;SET UP THE JUSTIFY PREFIX STRING
>
IFN FTJOUR,<
SWHREC:	MOVEM	T4,JRNFLG	;SAVE RECOVER-JOURNAL FLAG
	POPJ	P,

SWHJJJ:	CAIN	T1,"P"		;JUSTIFY-PREFIX SWITCH?
	JRST	SWHJHD		;YES - HANDLE IT
	CAIE	T1,"O"		;JOURNAL SWITCH?
	JRST	SWAERR		;NO - ERROR OR AMBIGUOUS
	TLZ	TM,JRW		;ASSUME NO JOURNAL
	JUMPGE	T4,CPOPJ	;WANT ONE AFTER ALL?
	TLO	TM,JRW		;YES
	CAIN	DO,$SWTCH	;SWITCH COMMAND OR SETTING UP A FILE?
	JRST	JRNSTT		;SWITCH - START THE JOURNAL FILE NOW
	POPJ	P,		;SETTING - JUST RETURN
>
SWHJHD:	JUMPE	T4,SWJHDN	;JUMP TO HANDLE /NOJHEAD
	MOVE	T4,[POINT 7,JUSHED]
	PUSHJ	P,SWHAGA	;READ THE JUSTIFY HEADER
	  JRST	SWGERR		;NO ARG - ERROR
	MOVE	T4,[POINT 7,JUSHED]
	SETZ	T3,		;FIND LENGTH AND # CHARS IN HEADER
SWJHD1:	ILDB	T1,T4		;GET A CHARACTER
	JUMPE	T1,SWJHD2	;DONE IF NULL
	CAIN	T1,11		;TAB?
	TLO	T3,7		;YES - MOVE LENGTH TO NEXT TAB STOP
	AOBJP	T3,SWJHD1	;BUMP BOTH HALVES AND LOOP

SWJHDN:	SETZ	T3,		;NO HEADER - CLEAR THE COUNTS
SWJHD2:	MOVEM	T3,JSHCNT	;SAVE THE COUNTS
	POPJ	P,		;DONE

SWHLLL:	CAIN	T1,"I"		;LINEFEED SWITCH?
	JRST	SWHLSD		;YES - HANDLE IT
	CAIN	T1,"M"		;LMAR SWITCH?
	JRST	SWHLMR		;YES - HANDLE IT
	CAIE	T1,"E"		;LENGTH SWITCH?
	JRST	SWAERR		;NO - IT'S AMBIGUOUS
	PUSHJ	P,SWHAG0	;YES - READ ARGUMENT
	  JRST	SWGERR		;NO ARG - ERROR
	TLNE	TM,WDW		;GOT TWO WINDOWS ON THE SCREEN?
	JRST	SWHERR		;YES - ERROR
	SKIPN	STTFLG		;INITIALIZING?
	JRST	SWHLPP		;NO - SET THE LENGTH UP NOW
	HRRM	T3,STTFLG	;YES - SAVE FOR LATER
	POPJ	P,		;DONE FOR NOW

SWHLPP::MOVEM	T3,LPP(TM)	;SAVE IN TERMINAL TABLE
	MOVE	T1,T3
	CAMGE	T1,LPP.0	;USING ALL THE LINES ON THE SCREEN?
	JRST	STLPP0		;NO - PUT ERRORS ON BOTTOM LINE
	MOVSI	T2,SLW!NEL	;YES - RESTORE SAVED SLW AND NEL FLAGS
	AND	T2,SAVFLG
	TLZ	TM,SLW!NEL
	OR	TM,T2
	JRST	SETLPP		;GO FINISH OFF

STLPP0:	TLO	TM,SLW!NEL	;MAKE ERRORS GO ON BOTTOM LINE
SETLPP::HRREI	T3,-1(T1)	;(ENTER WITH T1/LINES PER PAGE)
	IDIVI	T1,3
	MOVEM	T1,LINROL	;SAVE NOMINAL NUMBER OF LINES TO ROLL
	TRNE	F,RST		;RESTORING NOMINALS?
	MOVEM	T1,ROLLIN	;YES - SAVE AS CURRENT NUMBER, TOO
	MOVEM	T3,LPP.1	;SAVE LINES PER PAGE - 1
	MOVEM	T3,LPP.2	;SAVE BOTTOM LINE OF SCREEN
	TLNE	TM,NEL		;IF BOTTOM IS SCRATCH, USE NEXT LINE UP
	SOS	LPP.2
	POPJ	P,

SWHLSD:	CAIGE	T4,0		;SET LINEFEED-CURSOR DOWN FLAG?
	TLZA	TM,LSD		;NO
	TLO	TM,LSD		;YES
	POPJ	P,

SWHLMR:	PUSHJ	P,SWHAG0	;READ NEW LMAR (LEFT MARGIN) POSITION
	  JRST	SWGERR		;NO ARG - ERROR
	SOJGE	T3,SWLMR1	;MAKE THE VALUE ZERO-ORIGIN
	SETZ	T3,		;BUT MAP ZERO INTO ZERO
SWLMR1:	EXCH	T3,LMARGN	;SAVE LEFT MARGIN AND GET THE OLD SETTING
	SKIPE	RMARGN		;HAS THE RIGHT MARGIN BEEN SET YET?
	CAMGE	T3,RMARGN	;YES - IS IT TO THE LEFT OF THE RIGHT MARGIN?
	POPJ	P,		;YES - DONE
	EXCH	T3,LMARGN	;NO - PUT OLD SETTING BACK
	JRST	SWGERR		;AND GIVE AN ERROR

SWHOFL:	MOVE	T4,[POINT 7,NEWSPC]
	PUSHJ	P,SWHAGA	;READ THE NEW FILESPECS INTO A TEMPORARY AREA
	  JRST	SWGERR		;NO ARG - ERROR
	SETOM	OUTFLG		;SAY THERE WILL BE A CHANGE OF SPECS
	JUMPE	DO,CPOPJ	;DON'T CHANGE NOW IF INITIALIZING
	CAIN	DO,$SETFI	;O.K. TO MAKE THE CHANGE NOW?
	POPJ	P,		;NO - WAIT UNTIL END OF SET-FILE
				;ELSE FALL INTO:

;SUBROUTINE TO SET UP PARSE THE FILESPECS GIVEN IN THE /OUT: SWITCH
;Note: TOPS-20 doesn't really parse now, so user can stick himself

OUTSET::HRRZM	P,OUTFLG	;NOTE THAT SPEC IS CHANGING (BY OUTFLG .GT. 0)
	MOVE	T4,[POINT 7,NEWSPC]
	MOVE	T1,[FILSPC,,SVASPC]
	BLT	T1,SVASPC+SPCSIZ-1 ;SAVE THE CURRENT SPECS IN CASE PARSE FAILS
	MOVE	T1,[NEWSPC,,FILSPC]
	BLT	T1,FILSPC+7	;MOVE IN THE NEW FILSPECS
	PUSHJ	P,PARSEF	;PARSE THE SPECS (ERROR ON FAILURE)
	SETZM	OUTFLG		;SAY SPEC CHANGE IS NO LONGER WANTED
	SETOM	CHGSPC		;SAY SPECS HAVE CHANGED
	TLZ	F,SMF		;THIS FILE AND THE ALTERNATE CAN'T BE THE SAME
	TRNN	F,RDO		;IS FILE READ-ONLY?
	TLO	F,CHG		;NO - FORCE THE FILE TO BE SAVED
	POPJ	P,		;DONE

SWHWWW:	CAIN	T1,"R"		;WRITE SWITCH?
	JRST	SWHWRT		;YES - HANDLE IT
	CAIE	T1,"I"		;WIDTH SWITCH?
	JRST	SWAERR		;NO - IT'S AMBIGUOUS
	PUSHJ	P,SWHAG0	;YES - READ ARGUMENT
	  JRST	SWGERR		;NO ARG - ERROR
	SKIPN	STTFLG		;INITIALIZING?
	JRST	SWHWID		;NO - SET THE WIDTH UP NOW
	HRLM	T3,STTFLG	;YES - SAVE FOR LATER
	POPJ	P,		;DONE FOR NOW

SWHWID::MOVEM	T3,CPL(TM)	;SWAP WITH WIDTH IN TERMINAL TABLE
	SOJ	T3,		;ALSO SAVE CPL - 1
	MOVE	T2,T3		;PUT VALUE IN TWO PLACES
	EXCH	T2,CPL.1
	CAMLE	T2,RMARGN	;WAS RIGHT MARGIN .GE. WIDTH?
	CAMGE	T3,RMARGN	;NEED TO MOVE THE RIGHT MARGIN IN?
IFN TOPS10,<
	MOVEM	T3,RMARGN	;YES - DO SO
>
IFE TOPS10,<
IFN FTECHO,<
	MOVEM	T3,RMARGN	;YES - DO SO
>
IFN FTECHO,<
	JRST	[MOVEM T3,RMARGN ;YES - DO SO
		 AOJ   T3,
		 MOVEM T3,FLDWTH ;ADJUST FIELD WIDTH, TOO
		 SOJA  T3,.+1]
>>
	MOVE	T2,SAVFLG	;GET ORIGINAL TERMINAL FLAGS
	TLNN	T2,WRP		;DOES TERMINAL WRAP AROUND?
	POPJ	P,		;NO - IT STILL DOESN'T
	CAMLE	T3,CPL.0	;YES - IS NEW LENGTH SHORTER THAN SCREEN?
	TLOA	TM,WRP		;NO - MAKE IT WRAP
	TLZ	TM,WRP		;YES - NO WRAP
	POPJ	P,

SWHRDO:	SETCA	T4,		;READ-ONLY - COMPLEMENT WRITE FLAG
SWHWRT:	SETCAM	T4,SAVEAC+11	;STAGE THE VALUE IN CASE COMMAND IS SET-FILE
	CAIN	DO,$SETFI	;IS IT SET-FILE?
	POPJ	P,		;YES - DON'T SET THE FLAG NOW
SWHWR1:	CAIE	T4,0		;SET READ-ONLY FLAG?
	TRZA	F,RDO		;NO
	TRO	F,RDO		;YES
	POPJ	P,

SWHDDD:	CAIN	T1,"C"		;DEFINE COMMAND SWITCH?
	JRST	SWHDCM		;YES - HANDLE IT
	CAIN	T1,"E"		;DELIM SWITCH?
	JRST	SWHDLM		;YES - HANDLE IT
	CAIE	T1,"T"		;DISPLAY TABS SWITCH?
	JRST	SWAERR		;NO - IT'S AMBIGUOUS
	CAIE	T4,0		;YES - SET DISPLAY TABS FLAG?
	TROA	F,DTB		;YES
	TRZ	F,DTB		;NO
	POPJ	P,

SWHDLM:	SETZM	CHBITS		;CLEAR CHARACTER FLAGS TABLE
	MOVE	T1,[CHBITS,,CHBITS+1]
	BLT	T1,CHBITS+14
	SETZM	DELIM		;ASSUME DELIMITERS ARE TURNED OFF
	JUMPE	T4,CPOPJ	;JUMP IF /NODELIM WAS TYPED
SWDLM0:	ILDB	T1,PT		;LOOK FOR THE COLON: GET A CHARACTER
	JUMPE	T1,CPOPJ	;IF NONE TREAT SAME AS /NODELIM
	CAIE	T1,":"		;ELSE IS IT A COLON?
	JRST	SWDLM0		;NO - KEEP LOOKING
	SETOM	DELIM		;YES - SAY THERE IS A DELIMITER LIST
	MOVEI	T4,1		;SET TO SET THE DELIMITER FLAG
SWDLM1:	ILDB	T1,PT		;GET A CHARACTER OF THE STRING
	JUMPE	T1,CPOPJ	;DONE IF CHARACTER IS NULL
	CAIN	T1,"^"		;FORCING THE NEXT CHARACTER?
	ILDB	T1,PT		;YES - FORCE IT
	IDIVI	T1,^D9		;GET WORD AND POSITION IN WORD
	DPB	T4,CHRTAB(T2)	;SET THE FLAG
	JRST	SWDLM1		;GO GET ANOTHER CHARACTER

;MOVE KEY SEQUENCE TO TOP OF PARBUF, POINT TO EXECUTE FREE SPACE
;POINT TO START OF COMMAND NAME

;FORMAT: /DC:^[P:^EL
;PROCEDURE: SAVE KEYSTROKES SOMEWHERE. PARSE COMMAND INTO T1

;NOTE: NEED TO KEEP KEYSTROKE/COMMAND UNTIL AFTER INIT, SO THEY
;      GO INTO THE RIGHT TABLE. WHERE SHOULD THEY BE KEPT?

SWHDCM:	HRRZ	T4,XCFPTR	;GET POINTER TO EXECUTE FREE SPACE
	ADD	T4,[440700,,1]
	SETZM	(T4)		;CLEAR PREVIOUS CONTENTS
	ILDB	T0,PT		;SKIP COLON AFTER THE SWITCH, IF ANY
	CAIN	T0,":"
SWHDC1:	ILDB	T0,PT		;GET CHARACTER OF SEQUENCE
	CAIN	T0,":"		;START OF CONTENTS?
	JRST	SWHDC3		;YES - SEE IF COMMAND IS LEGAL
	JUMPE	T0,SDCERR	;NULL - ERROR
	CAIN	T0,15		;START OF ANOTHER SWITCH?
	JRST	SDCERR		;YES - ERROR
	CAIE	T0,"^"		;NO - GOT A CONTROL CHARACTER?
	JRST	SWHDC2		;NO - PROCEED
	ILDB	T0,PT		;YES - GET NEXT CHARACTER
	CAIN	T0,"?"		;RUBOUT?
	TROA	T0,177		;YES - SET IT UP SPECIALLY
	ANDI	T0,37		;ELSE MAKE A CONTROL CHARACTER
SWHDC2:	TLNE	T4,760000	;ALREADY GOT 5 CHARACTERS?
	IDPB	T0,T4		;NO - SAVE CHARACTER
	JRST	SWHDC1		;AND GET ANOTHER

;HERE WHEN KEYSTROKE IS FOUND - GET COMMAND INDEX IN T3

SWHDC3:	ILDB	T2,PT		;GET THE (HOPEFULLY) STARTING UP-ARROW
	CAIN	T2,"$"		;GOT THE ENTER COMMAND?
	JRST	[MOVEI T3,33	;YES - SET UP ITS INDEX
		 JRST  SWHD4A]	;AND SKIP ALL THIS CHECKING
	PUSHJ	P,XCWGET	;PUT 2ND CHARACTER IN WITH THE UP-ARROW
	PUSHJ	P,XCWGET	;DITTO 3RD CHARACTER
	CAME	T2,["^RF"]	;GOT A ROLL FORWARD
	CAMN	T2,["^RB"]	;  OR BACKWARD?
	JRST	SWHDC5		;YES - NEED TO GET ANOTHER CHARACTER
	LSH	T2,^D15		;NO - LEFT-JUSTIFY COMMAND NAME
SWHDC4:	ILDB	T1,PT		;GET NEXT CHARACTER OF COMMAND
	JUMPN	T1,SDCERR	;ERROR IF THERE'S ANYTHING THERE
	MOVEI	T3,CMDLEN-1	;LOOK FOR COMMAND AMONG NAMES
	CAME	T2,CMDNAM(T3)	;IS THIS IT?
	SOJGE	T3,.-1		;NO - KEEP LOOKING
	JUMPL	T3,SDCERR	;ERROR IF NOT FOUND

SWHD4A:	MOVE	PT,XCFPTR	;GET POINTER TO KEYSTROKE SEQUENCE
	SKIPE	STTFLG		;INITIALIZING?
	JRST	CMDSAV		;YES - DON'T CHANGE TABLE NOW
				;ELSE FALL TO SET UP COMMAND, AND RETURN

;SUBROUTINE TO CHANGE THE COMMAND TABLE
;CALL WITH PT/ POINTER TO KEYSTROKE,  T3/ NEW COMMAND

SWHDCS:	ILDB	T4,PT		;GET THE FIRST CHARACTER
	CAIN	T4,177		;RUBOUT?
	SETO	T4,		;YES - USE -1 AS OFFSET
	ADD	T4,ITB(TM)	;GET OFFSET IN TERMINAL TABLE
	MOVE	T1,T4		;REMEMBER TABLE ADDRESS
	SKIPGE	T4,(T4)		;IS IT A NORMAL COMMAND?
	JRST	SWHDC0		;NO - GO LOOK IN SUBTABLE
	ILDB	T0,PT		;YES - GET NEXT CHARACTER OF SEQUENCE
;@	JUMPN	T0,SDCERR	;ERROR IF SEQUENCE IS NOT 1 CHARACTER LONG
;@
	JUMPN	T0,CPOPJ	;IF SEQUENCE IS NOT 1 CHARACTER LONG, IGNORE IT
	MOVEM	T3,(T1)		;SAVE THE NEW COMMAND IN THE TABLE
	POPJ	P,		;DONE

SWHDC0:	ILDB	T0,PT		;GET NEXT USER-GIVEN CHARACTER
SWHDS1:	SKIPN	T1,(T4)		;GET A SUBTABLE ENTRY - END?
;@	JRST	SDCERR		;YES - COMMAND IS NOT LEGAL
;@
	POPJ	P,		;YES - COMMAND IS NOT LEGAL - IGNORE IT
	TRNN	T1,-1		;MATCH ON ANY CHARACTER?
	JRST	SWHDS2		;YES - SET UP REAL COMMAND NOW
	CAIE	T0,(T1)		;DO USER'S AND TABLE'S CHARS MATCH?
	AOBJN	T4,SWHDS1	;NO - LOOP ON THE TABLE
;@	JUMPG	T4,SDCERR	;NOT LEGAL IF END OF TABLE AND NOT FOUND
;@
	JUMPG	T4,CPOPJ	;NOT LEGAL IF END OF TABLE & NOT FOUND - IGNORE
SWHDS2:	CAMLE	T1,[137,,0]	;ELSE FOUND - WANT ANOTHER LEVEL?
	JRST	SWHDS3		;YES - SET IT UP
SWDS2A::HRLM	T3,(T4)		;SAVE THE NEW COMMAND IN THE SUBTABLE
	POPJ	P,		;DONE

SWHDS3:	TLZE	T1,200000	;GOT AN EXECUTE COMMAND?
	JRST	SWDS2A		;YES - SET IT UP AFTER ALL
	HLRZ	T4,T1		;POINT TO NEW SUBTABLE
	HRLI	T4,-^D40
	JRST	SWHDC0		;AND PICK UP ANOTHER CHARACTER

SWHDC5:	PUSHJ	P,XCWGET	;GET REST OF COMMAND NAME
	LSH	T2,^D8		;LEFT-JUSTIFY COMMAND NAME
	JRST	SWHDC4		;GO FIND THE COMMAND

;HERE WHEN INITIALIZING - STORE THE COMMAND CHANGE IN THE CLOSE BUFFER
;CALL WITH PT/ COMMAND SEQUENCE, T3/ NEW COMMAND

CMDSAV:	AOS	T1,CLSBUF+400	;GET THE SAVE POINTER
	MOVE	T2,1(PT)	;GET THE COMMAND SEQUENCE
	MOVEM	T2,CLSBUF+400(T1) ;SAVE THE COMMAND SEQUENCE
	MOVEM	T3,CLSBUF+401(T1) ;SAVE THE NEW COMMAND
	AOS	CLSBUF+400	;ADVANCE THE POINTER
	POPJ	P,		;DONE

;HERE AFTER INITIALIZATION, TO MAKE THE CHANGES TO THE COMMAND TABLE

CMDSET::SOSGE	T1,CLSBUF+400	;ARE THERE ANY CHANGES?
	POPJ	P,		;NO - JUST RETURN
	MOVEI	PT,CLSBUF+400(T1) ;GET THE POINTER TO THE COMMAND SEQUENCE
	HRLI	PT,440700
	MOVE	T3,CLSBUF+401(T1) ;GET THE NEW COMMAND
	PUSHJ	P,SWHDCS	;MAKE THE CHANGE
	SOS	CLSBUF+400	;SKIP OVER BOTH PIECES OF DATA
	JRST	CMDSET		;LOOP THROUGH ALL THE CHANGES

;NOW ON WITH THE NORMAL SWITCHES

SWHHLP:	CAIE	T4,0		;SET NO-HELP-WANTED FLAG?
	TRZA	F,NHP		;NO
	TRO	F,NHP		;YES
	POPJ	P,

SWHIII:	CAIN	T1,"D"		;I.D. SWITCH?
	JRST	SWHIDD		;YES - HANDLE IT
	CAIN	T1,"M"		;INSERT-MODE SWITCH?
	JRST	SWHIMD		;YES - HANDLE IT
	CAIN	T1,"C"		;INSERT-CR-IN-INSERT-MODE SWITCH?
	JRST	SWHICR		;YES - HANDLE IT
	CAIN	T1,"N"		;INVERT CASE SWITCH?
	JRST	SWHINV		;YES - HANDLE IT
	CAIN	T1,"T"		;INSERT TABS SWITCH?
	JRST	SWHINT		;YES - HANDLE IT
	CAIE	T1,"S"		;INCREMENTAL SAVE SWITCH?
	JRST	SWAERR		;NO - IT'S AMBIGUOUS

	JUMPE	T4,SWHII1	;YES - JUMP IF USER SAID /NOISAVE
	PUSHJ	P,SWHAG0	;ELSE READ ARGUMENT
	  JRST	SWGERR		;NO ARG - ERROR
	CAIG	T3,0		;DID USER SAY /ISAVE:0?
SWHII1:	HRLO	T3,P		;YES - USE -1 (FOR NO SAVES)
	MOVEM	T3,ISVNUM	;ELSE SAVE # COMMANDS BETWEEN ISAVES
	MOVEM	T3,ISVCNT	;SAVE AS COUNTDOWN VALUE, TOO
	POPJ	P,

SWHICR:	CAIE	T4,0		;SET NO CR IN INSERT MODE FLAG?
	TRZA	F,NCR		;NO
	TRO	F,NCR		;YES
	POPJ	P,

SWHIMD:	CAIN	T4,0		;SET INSERT-MODE?
	TRZA	F,IMD		;NO - CLEAR FLAG AND RETURN
IFN TOPS10,<
	TRO	F,IMD		;YES - SET FLAG AND RETURN
	POPJ	P,
>
IFE TOPS10,<
IFN FTECHO,<
	TROA	F,IMD		;YES - SET FLAG AND SKIP TO SET ECHOES
	POPJ	P,
	JRST	EKOALL		;SET NO ECHO; BREAK ON ALL CHARACTERS; RETURN
>
IFE FTECHO,<
	TRO	F,IMD		;YES - SET FLAG AND RETURN
	POPJ	P,
>>
SWHIDD:	SETZM	TAGFLG		;ASSUME THE USER WANTS /NOID
	JUMPE	T4,CPOPJ	;DONE IF HE DOES
	SETZM	TAGFLG+1
	SETZM	TAGFG1		;ELSE ASSUME THERE'S NO ENDING COMMENT CHARS
	MOVE	T4,[POINT 7,TAGFLG]
	PUSHJ	P,SWHAGC	;READ THE STARTING CHARACTER(S)
	  JRST	SWHIDS		;NO ARG - USE A SEMICOLON; DONE
	JUMPE	T1,CPOPJ	;DONE IF NO ENDING CHARACTER(S)
	MOVE	T4,[POINT 7,TAGFG1]
	JRST	SWHGC1		;ELSE READ THE ENDING CHARACTER(S) AND RETURN

SWHIDS:	MOVSI	T1,(ASCII /;/)	;NO ARG - DEFAULT TO A COLON
	MOVEM	T1,TAGFLG
	POPJ	P,		;DONE

SWHINV:	SETCAM	T4,INVFLG	;SAVE SETTING OF INVERT-CASE SWITCH
	POPJ	P,

SWHINT:	SETCAM	T4,INSTBS	;SAVE SETTING OF INSERT-TABS SWITCH
	POPJ	P,

;this turns it off; need to turn it back on

SWHMMM:	JUMPL	T4,CPOPJ	;DO NOTHING IF TURNING MESSAGE BACK ON
	MOVE	T1,[BYTE (7) 15,12]
IFN TOPS10,<
	MOVEM	T1,NEWMSG	;ELIMINATE THE NEW-FILE MESSAGE
	HRROS	NEWCCL		;CHANGE THE CHANNEL COMMAND TO BE ONE WORD
>
IFE TOPS10,<
	SETZM	NEWMSG
>
	SETZM	NEWMSG+1	;CLEAR THIS WORD AS A FLAG
	TRNE	F,GFL		;GOT A FILE TO EDIT?
	POPJ	P,		;YES - THE CHEERY MESSAGE NO LONGER EXISTS
	MOVEM	T1,BUFFER	;NO - ELIMINATE THE CHEERY MESSAGE
	MOVE	EN,[010700,,BUFFER]
	SETZM	BUFFER+1
	MOVE	T1,[BUFFER+1,,BUFFER+2]
	BLT	T1,BUFFEN
	POPJ	P,		;DONE

SWHTTT:	JUMPE	T1,SWHTB0	;MAKE "/T" DEFAULT TO /TABS
	CAIE	T1,":"		;DITTO
	CAIN	T1,"A"		;AND /TA IS /TABS, TOO
	JRST	SWHTB0
	CAIN	T1,"R"		;/TRAIL FLAG?
	JRST	SWHTRL		;YES - HANDLE IT
	CAIE	T1,"S"		;TAB-SET?
	JRST	SWAERR		;NO - IT'S AMBIGUOUS

	PUSHJ	P,SWHAG0	;TAB-SET - READ THE DECIMAL TAB POSITION
	  JRST	SWGERR		;NO ARG - ERROR
	TLO	TM,STB		;TURN ON SETTABLE TABS
SWHTT0:	SOS	T2,T3		;MAKE THE COLUMN ZERO-BASED
        IDIVI	T2,^D36		;GET WORD AND POSITION IN WORD
	MOVN	T3,T3		;NEGATE POSITION
	MOVSI	T0,400000	;GET BIT FOR SHIFTING
	LSH	T0,(T3)		;SHIFT RIGHT TO THE RIGHT POSITION
	JUMPE	T4,SWHTT1	;JUMP IF WANT TO CLEAR THE BIT
	ORM	T0,TABTBL(T2)	;SET THAT BIT
	JRST	SWHTT2		;CONTINUE
SWHTT1:	ANDCAM	T0,TABTBL(T2)	;CLEAR THAT BIT
SWHTT2:	JUMPE	T1,CPOPJ	;RETURN IF THERE'S NO MORE
	PUSHJ	P,SWHAG2	;ELSE READ THE NEXT VALUE
	JRST	SWHTT0		;AND LOOP TO SET IT

SWHTB0:	JUMPE	T4,SWHTBW	;IF NOTABS, SET UP WORDWISE TABS
	JUMPE	T1,SWHTNW	;IF IF JUST "/T" SET UP NORMAL TABS
SWHTAB:	CAIN	T1,":"		;ELSE SKIP UNTIL THE COLON IS FOUND
	JRST	SWHTA1		;GOT IT - PROCEED
	ILDB	T1,PT		;GET THE NEXT CHARACTER
	JUMPN	T1,SWHTAB	;MAYBE THIS IS THE COLON
	JRST	SWHTNW		;IF NO ARG, SET UP NORMAL TABS

SWHTA1:	MOVE	T0,PT		;SAVE POINTER TO START OF ARGUMENT
	PUSHJ	P,SWHLUR	;ELSE GET THE 1ST ARGUMENT CHARACTER
	CAIN	T1,"W"		;WANT WORDWISE TABS?
	JRST	SWHTBW		;YES - GO SET THEM
	CAIE	T1,"S"		;WANT "SETTABLE" TABS (FOR COMPATIBILITY)?
	CAIN	T1,"R"		;WANT REGULAR TABS?
	JRST	SWHTNW		;YES - GO SET THEM
	MOVE	PT,T0		;NO - POINT TO THE ARGUMENT AGAIN
	PUSHJ	P,SWHAG1	;READ THE REST OF THE NUMERIC ARGUMENT
	  JRST	SWHTNW		;NO ARG - SET UP NORMAL TABS
	MOVEM	T3,TABLEN	;SAVE ARG AS LENGTH OF A TAB
	PUSHJ	P,TABINI	;INITIALIZE THE TAB TABLE
	TLZ	TM,STB		;MAKE SURE SETTABLE TAB FLAG IS OFF
SWHTNW:	TRZA	F,WTB		;CLEAR WORDWISE TAB FLAG
SWHTBW:	TRO	F,WTB		;SET WORDWISE TAB FLAG
	POPJ	P,		;DONE

SWHTRL:	MOVEM	T4,TRLFLG	;SAVE PRESERVE-TRAILING-SPACES FLAG
	POPJ	P,		;DONE

SWHGGG:	JUMPE	T1,SWHPRC	;TREAT A LONE "G" AS GOTO
	CAIE	T1,"O"		;WANT THE GOTO SWITCH,
	CAIN	T1,":"		;  OR GOT JUST "G:"?
	JRST	SWHPRC		;YES - HANDLE IT
	CAIE	T1,"R"		;GLOBAL-READ-ONLY SWITCH?
	JRST	SWAERR		;NO - IT'S AMBIGUOUS
	MOVEM	T4,GREFLG	;YES - SAVE THE DEFAULT-READ-ONLY FLAG
	JRST	SWHRDO		;SET OR CLEAR READ-ONLY FLAG AND RETURN

SWHPRC:	PUSHJ	P,SWHARG	;GET PERCENTAGE TO GO TO
	  SKIPA	T3,GOPERC	;IF NO ARG USE CURRENT PERCENT
SWHPC1:	CAIGE	T3,0		;GOT A NEGATIVE PERCENTAGE?
	MOVEI	T3,^D100	;YES - TREAT AS 100%
	CAILE	T3,^D100	;IS THE VALUE TOO BUG?
	JRST	SWGERR		;YES - ERROR
	MOVEM	T3,GOPRCT	;O.K. - SAVE STARTING PERCENT VALUE
	POPJ	P,

SWHPPP:	CAIN	T1,"A"		;PAGE-AND-LINE STATUS SWITCH?
	JRST	SWHPAG		;YES - HANDLE IT
	CAIN	T1,"I"		;PARAGRAPH INDENT SWITCH?
	JRST	SWHPAR		;YES - HANDLE IT
	CAIE	T1,"R"		;PROG TO RUN ON EXIT SWITCH?
	JRST	SWAERR		;NO - IT'S AMBIGUOUS
IFN TOPS10,<
	PUSHJ	P,SWHGS0	;READ NAME OF SYSTEM CUSP TO RUN IN SIXBIT
	  JRST	SWGERR		;NO ARG - ERROR
	MOVEM	T3,GOBLK+1	;SAVE IN RUN BLOCK
>
IFE TOPS10,<
	MOVE	T4,[POINT 7,GOBLK]
	PUSHJ	P,SWHAGA	;READ NAME OF CUSP TO RUN IN ASCII
	  JRST	SWGERR		;NO ARG - ERROR
>
	POPJ	P,		;THAT'S ALL

SWHPAG:	MOVEM	T4,PAGFLG	;SAVE PAGE/LINES FLAG
	POPJ	P,

SWHPAR:	PUSHJ	P,SWHAG0	;READ AMOUNT TO INDENT A PARAGRAPH
	  SETZ	T3,		;NO ARG - SET NO INDENT
	MOVEM	T3,PARIND	;SAVE THE VALUE
	POPJ	P,		;DONE

SWHEEE:				;HERE FOR EXT SWITCH - LIST OF DEFAULT EXT'S
IFN TOPS10,<
	HLLZS	EXTTBL		;CLEAN OUT THE EXTENSION TABLE
	SETZM	EXTTBL+1
	MOVE	T1,[EXTTBL+1,,EXTTBL+2]
	BLT	T1,EXTTBL+5
	MOVSI	T0,-^D10	;SET UP COUNTER INTO EXTENSION TABLE
	MOVE	T4,[POINT 18,EXTTBL,17]
	MOVEM	T4,SAVEAC+10	;AND POINTER INTO SAME
	PUSHJ	P,SWHSC0	;READ THE FIRST EXTENSION IN SIXBIT
	  JRST	SWGERR		;NO ARG - ERROR
	JRST	SWHEE2		;JUMP INTO THE LOOP

SWHEE1:	AOBJP	T0,CPOPJ	;POINT TO THE PLACE TO STORE THE NEXT EXT'N
	PUSHJ	P,SWHSC1	;READ THE NEXT EXTENSION
SWHEE2:	HLRZ	T3,T3		;PUT THE EXTENSION IN THE RH
	IDPB	T3,SAVEAC+10	;SAVE IT IN THE TABLE
	JUMPN	T1,SWHEE1	;IF NOT END OF LIST, LOOP TO GET NEXT ONE
	POPJ	P,		;ELSE DONE
>
IFE TOPS10,<
	SETZM	EXTTBL+1	;CLEAN OUT THE EXTENSION TABLE
	MOVE	T1,[EXTTBL+1,,EXTTBL+2]
	BLT	T1,EXTTBL+11
	MOVSI	T3,-^D10	;SET UP COUNTER INTO EXTENSION TABLE
	MOVE	T4,[POINT 7,EXTTBL+1(T3)]
	PUSHJ	P,SWHAGC	;READ THE FIRST EXTENSION
	  JRST	SWGERR		;NO ARG - ERROR
	JRST	SWHEE2		;JUMP INTO THE LOOP

SWHEE1:	AOBJP	T3,CPOPJ	;POINT TO THE PLACE TO STORE THE NEXT EXT'N
	MOVE	T4,[POINT 7,EXTTBL+1(T3)]
	PUSHJ	P,SWHGC1	;READ THE NEXT EXTENSION
SWHEE2:	JUMPN	T1,SWHEE1	;IF NOT END OF LIST, LOOP TO GET NEXT ONE
	POPJ	P,		;THAT'S ALL
>
SWHQQQ:	MOVEM	T4,DSPFLG	;SAVE DISPLAY-ON-SETFIL FLAG
	POPJ	P,

SWHTRM:	PUSHJ	P,SWHAGS	;READ NAME OF TERMINAL TO USE
	  JRST	SWGERR		;NO ARG - ERROR
	MOVEM	T3,TRMNAM	;SAVE TERMINAL NAME
	POPJ	P,		;THAT'S ALL

SWHFFF:	JUMPE	T1,SWAERR	;JUST "F" IS AMBIGUOUS
	CAIN	T1,"E"		;FENCE SWITCH?
	JRST	SWHFNC		;YES - HANDLE IT
	CAIE	T1,"I"		;JUSTIFY-FILL SWITCH?
	JRST	SWHSTT		;NO - GO HANDLE THE FILE SWITCHES
	MOVEM	T4,FLLFLG	;YES - SET THE FILL FLAG
	POPJ	P,		;DONE

SWHFNC:	DMOVE	T1,[ASCIZ / *FENCE* /] ;ASSUME SHORT FENCE IS WANTED
	JUMPE	T4,SWHFC1	;REALLY WANT TO SET THE LONG FENCE?
	DMOVE	T1,[ASCII /   *** Thi/] ;OF COURSE - SET IT BACK UP
SWHFC1:	DMOVEM	T1,FENCE
	POPJ	P,		;DONE

;HERE FOR VARIOUS FILE STATUS SWITCHES: FC, FR, FS, FD, FO
;IF THESE ARE USED, /FD MUST APPEAR AND BE FIRST

SWHSTT:	MOVE	T2,T1		;SAVE FLAVOR OF SWITCH
	PUSHJ	P,SWHAG0	;READ ITS ARGUMENT
	  JRST	SWGERR		;NO ARG - ERROR
	CAIN	T2,"C"		;FC (COLUMN POSITION) SWITCH?
	JRST	SWHSTC		;YES - GO DO IT
	CAIN	T2,"R"		;FR (ROW POSITION) SWITCH?
	JRST	SWHSTR		;YES - GO DO IT
	CAIN	T2,"S"		;FS (SLIDE OFFSET) SWITCH?
	JRST	SWHSTL		;YES - GO DO IT
	CAIN	T2,"D"		;FD (DISPLAY POINTER) SWITCH?
	JRST	SWHSTD		;YES - GO DO IT
	CAIN	T2,"O"		;FO (ONE-SHOT) SWITCH?
	JRST	SWHOSH		;YES - GO DO IT
	JRST	SWHERR		;ANYTHING ELSE IS AN ERROR

SWHSTC:	HRLM	T3,PRERW	;SET UP COLUMN POSITION
	POPJ	P,
SWHSTR:	HRRM	T3,PRERW	;SET UP ROW POSITION
	POPJ	P,
SWHSTL:	MOVEM	T3,PRESL	;SET UP SLIDE OFFSET
	POPJ	P,
SWHOSH:	MOVEM	T3,PREONE	;SET UP ONE-SHOT POINTER
	POPJ	P,

SWHSTD:	SETZM	PRERW		;CLEAR THE OTHER POINTERS
	SETZM	PRESL
	IDIVI	T3,5		;SEPARATE INTO WORD, POSITION IN WORD
	ADDI	T3,BUFFER	;MAKE POINTER RELATIVE TO START OF BUFFER
	JUMPE	T4,SWHSD1	;HANDLE POINTING TO START OF WORD SPECIALLY
	HRL	T3,PTRTBL(T4)	;MAKE IT POINT AT THE RIGHT BIGHT
SWHSD0:	MOVEM	T3,PREDP	;SAVE POINTER IN THE RYTE PLACE
	POPJ	P,		;DONE
SWHSD1:	HRLI	T3,010700
	SOJA	T3,SWHSD0

;THE ONE-SHOT ARGUMENT IS THE CHARACTER IN THE FILE WHICH THE CURSOR SHOULD
;POINT TO. IT WILL BE SET UP 1/3 DOWN THE SCREEN. SO NEED TO CALCULATE
;CHRPTR, LINPTR, DISPTR, RW, CM, AND SL

;SWHOSH:	IDIVI	T3,5		;SEPARATE INTO WORD, POSITION IN WORD
;	ADDI	T3,BUFFER	;MAKE POINTER RELATIVE TO START OF BUFFER
;	HRL	T3,PTRTBL(T4)	;MAKE IT POINT AT THE RIGHT BYTE
;	MOVE	PT,T3		;SAVE POINTER IN THE RIGHT PLACE
;	JRST	SRCSET		;SET EVERYTHING UP AND RETURN

;SUBROUTINE TO READ COLON (MAYBE) AND NUMERIC ARGUMENT OF A SWITCH
;RETURNS T3/ VALUE, T1/ DELIMITER (0 OR ",")
;GIVES SKIP RETURN IF VALUE FOUND, NON-SKIP IF NO COLON FOUND
;TO READ THE 2ND AND FURTHER VALUES, ENTER AT SWHAG2

SWHAG0:	ILDB	T1,PT		;GET THE NEXT CHARACTER
SWHARG:	CAIE	T1,":"		;GOT A COLON?
	JUMPN	T1,SWHAG0	;NO - TRY NEXT ONE, IF ANY
SWHAG1:	JUMPE	T1,CPOPJ	;NO COLON - NON-SKIP RETURN
	AOS	(P)		;GOT THE COLON - GIVE SKIP RETURN
SWHAG2:	SETZB	T3,T0		;CLEAR TARGET AND NEGATIVE FLAG
	PUSHJ	P,SWHLUR	;GET FIRST DIGIT OR DASH
	CAIN	T1,"-"		;WANT TO NEGATE THE RESULT?
	TDOA	T0,[-1]		;YES - REMEMBER THAT FACT
	CAIA			;NO - SKIP TO TREAT CHAR AS A DIGIT

SWHAG3:	PUSHJ	P,SWHLUR	;GET A DIGIT
	JUMPE	T1,SWHAG4	;DONE IF NULL
	CAIN	T1,","		;GOT ONE NUMBER OF A LIST?
	POPJ	P,		;YES - RETURN
	SUBI	T1,"0"		;ELSE CONVERT TO NUMERIC
	JUMPL	T1,SWGER0	;ERROR IF NOT A NUMBER
	CAILE	T1,9
	JRST	SWGER0		;DITTO
	IMULI	T3,^D10		;ELSE MULTIPLY BY TEN
	ADD	T3,T1		;ADD IN THE NEW DIGIT
	JRST	SWHAG3		;AND GET ANOTHER ONE

SWHAG4:	JUMPE	T0,CPOPJ	;DONE IF NUMBER SHOULD BE POSITIVE
	MOVN	T3,T3		;ELSE NEGATE THE RESULT
	POPJ	P,		;THEN RETURN

;SUBROUTINE TO READ COLON (MAYBE) AND SIXBIT ARGUMENT OF A SWITCH
;RETURNS VALUE, IN SIXBIT, IN T3
;GIVES SKIP RETURN IF VALUE FOUND, NON-SKIP IF NO COLON FOUND

SWHGS0:	ILDB	T1,PT		;GET THE COLON
SWHAGS:	CAIE	T1,":"		;IS IT REALLY?
	JUMPN	T1,SWHGS0	;NO - TRY NEXT ONE, IF ANY
	JUMPE	T1,CPOPJ	;NO COLON - NON-SKIP RETURN
	AOS	(P)		;GOT THE COLON - GIVE SKIP RETURN
	SETZ	T3,		;CLEAR TARGET
	MOVE	T4,[POINT 6,T3] ;AND POINT TO TARGET
	MOVEI	T0,6		;EXPECT A MAXIMUM OF SIX
SWHGS1:	ILDB	T1,PT		;GET A CHARACTER
	JUMPE	T1,CPOPJ	;RETURN, IF NULL
	CAIL	T1,"a"		;LOWER CASE?
	TRZA	T1,100		;YES - MAKE IT SIXBIT
	SUBI	T1," "		;CONVERT TO SIXBIT
	JUMPL	T1,SWGER0	;ERROR IF NOT LEGALLY SIXBIT
	IDPB	T1,T4		;ELSE SAVE IT WITH THE REST
	SOJG	T0,SWHGS1	;GET MORE - COUNTED OUT?
	POPJ	P,		;YES - USE ONLY 6 CHARACTERS

IFN TOPS10,<
;SUBROUTINE TO READ COLON (MAYBE) AND SIXBIT ARGUMENT OF A SWITCH
;RETURNS T3/ SIXBIT STRING, T1/ DELIMITER (0 OR ",")
;GIVES SKIP RETURN IF VALUE FOUND, NON-SKIP IF NO COLON FOUND
;FOR ALL BUT THE FIRST VALUE, ENTER AT SWHSC1: (RETURNS +1)

SWHSC0:	ILDB	T1,PT		;GET THE COLON
SWHGSC:	CAIE	T1,":"		;IS IT REALLY?
	JUMPN	T1,SWHSC0	;NO - TRY NEXT ONE, IF ANY
	JUMPE	T1,CPOPJ	;NO COLON - NON-SKIP RETURN
	AOS	(P)		;GOT THE COLON - GIVE SKIP RETURN
SWHSC1:	SETZ	T3,		;CLEAR TARGET
	MOVE	T4,[POINT 6,T3] ;AND POINT TO TARGET
	MOVEI	T2,6		;EXPECT A MAXIMUM OF SIX
SWHSC2:	ILDB	T1,PT		;GET A CHARACTER
	CAIN	T1,","		;END OF THE STRING?
	POPJ	P,		;YES - DONE
	JUMPE	T1,CPOPJ	;RETURN, IF NULL
	CAIL	T1,"a"		;LOWER CASE?
	TRZA	T1,100		;YES - MAKE IT SIXBIT
	SUBI	T1," "		;CONVERT TO SIXBIT
	JUMPL	T1,SWGER0	;ERROR IF NOT LEGALLY SIXBIT
	IDPB	T1,T4		;ELSE SAVE IT WITH THE REST
	SOJG	T2,SWHSC2	;GET MORE - COUNTED OUT?
	POPJ	P,		;YES - USE ONLY 6 CHARACTERS
>
;SUBROUTINE TO READ ASCII ARGUMENT OF A SWITCH INTO (T4)
;GIVES SKIP RETURN IF VALUE FOUND, NON-SKIP IF NO COLON FOUND

SWHGA0:	ILDB	T1,PT		;GET THE COLON
SWHAGA:	CAIE	T1,":"		;IS IT REALLY?
	JUMPN	T1,SWHGA0	;NO - TRY NEXT ONE, IF ANY
	JUMPE	T1,CPOPJ	;NO COLON - NON-SKIP RETURN
	AOS	(P)		;GOT THE COLON - GIVE SKIP RETURN
SWHGA1:	PUSHJ	P,SWHLRX	;GET A CHARACTER
	IDPB	T1,T4		;SAVE IT WITH THE REST
	JUMPN	T1,SWHGA1	;NO - LOOP IF NOT NULL
	POPJ	P,		;ELSE RETURN

;SUBROUTINE TO READ ASCII ARGUMENT OF A SWITCH INTO (T4)
;GIVES SKIP RETURN IF VALUE FOUND, NON-SKIP IF NO COLON FOUND
;DELIMITER (0 OR ",") IS RETURNED IN T1
;(LIKE ABOVE, BUT STOPS ON A ",")

SWHGC0:	ILDB	T1,PT		;GET THE COLON
SWHAGC:	CAIE	T1,":"		;IS IT REALLY?
	JUMPN	T1,SWHGC0	;NO - TRY NEXT ONE, IF ANY
	JUMPE	T1,CPOPJ	;NO COLON - NON-SKIP RETURN
	AOS	(P)		;GOT THE COLON - GIVE SKIP RETURN
SWHGC1:	PUSHJ	P,SWHLRX	;GET A CHARACTER
	JUMPE	T1,CPOPJ	;DONE IF NULL
	CAIN	T1,","		;END OF THIS VALUE?
	POPJ	P,		;YES - RETURN
	IDPB	T1,T4		;ELSE SAVE IT WITH THE REST
	JRST	SWHGC1		;AND LOOP

;IF SWITCH ERROR OUTPUT MESSAGE, RETURN TO CALLER OF SWHONE

SWHER0:	POP	P,		;RETURN TO CALLER OF SWHONE
SWHERR:	MOVEI	T1,[ASCIZ /############Illegal switch/]
SWHER1:	CAIN	DO,$SETFI	;DOING A SET-FILE?
	JRST	STFERR		;YES - GIVE SET-FILE-FLAVORED ERROR
	JRST	ERROR		;ELSE DISPLAY THE ERROR AND RETURN

SWAERR:	JUMPN	T1,SWHERR	;IF A CHARACTER WAS TYPED IT'S REALLY ILLEGAL
	MOVEI	T1,[ASCIZ /#########Ambiguous switch/]
	JRST	SWHER1		;DISPLAY THE ERROR AND RETURN

SWGER0:	POP	P,		;RETURN TO CALLER OF SWHONE
SWGERR:	MOVEI	T1,[ASCIZ /######Illegal switch argument/]
	JRST	SWHER1		;DISPLAY THE ERROR AND RETURN

SWMERR:	SKIPA	T1,[[ASCIZ ?Can't use /RCUR and /AGAIN together?]]
SDCERR:	MOVEI	T1,[ASCIZ ?######Illegal argument for /DC:?]
	JRST	ERROR		;(ALWAYS TREAT AS A NON-SET-FILE ERROR)

SALERR:	MOVEI	T1,[ASCIZ ?####Use /ALT only at monitor level?]
	JRST	ERROR		;(ALWAYS TREAT AS A NON-SET-FILE ERROR)

;SWITCH DISPATCH ADDRESSES

SWHADR:	EXP	SWHAAA,SWHBBB,SWHCCC,SWHDDD,SWHEEE	  ;A, B, C, D, E
IFE FTJOUR,<
	EXP	SWHFFF,SWHGGG,SWHHLP,SWHIII,SWHERR	  ;F, G, H, I, J
>
IFN FTJOUR,<
	EXP	SWHFFF,SWHGGG,SWHHLP,SWHIII,SWHJJJ	  ;F, G, H, I, J
>
	EXP	SWHERR,SWHLLL,SWHMMM,SWHNNN,SWHOFL	  ;K, L, M, N, O
	EXP	SWHPPP,SWHQQQ,SWHRRR,SWHSSS,SWHTTT	  ;P, Q, R, S, T
	EXP	SWHUPP,SWHERR,SWHWWW,SWHERR,SWHERR,SWHTRM ;U, V, W, X, Y, Z

	END