Google
 

Trailing-Edge - PDP-10 Archives - bb-m836d-bm - tools/blis10/loio.mac
There are 18 other files named loio.mac in the archive. Click here to see a list.
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
;  OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (C) 1972,1973,1974,1977,1978 DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS. 01754
;  CONDITIONAL ASSEMBLY PAGE
;  =========================




;	CMUSW = 1	FOR A CMU VERSION OF BLISS
;		0	FOR A STANDARD VERSION.
;			(THE CMU VERSION RECOGNIZED THE CMU PPN'S)
;
;
;	BLIS11 = 1	FOR BLISS 11 COMPILER I/O MODULE (BL11IO)
;		 0	FOR BLISS 10 COMPILER I/O MODULE (BLISIO)
;
;
;	TIMSW = 1	TO GENERATE TIMING HOOKS
;
;
;	NONREN = 1	TO GENERATE NONSHARABLE CODE
;		 0	FOR SHARABLE CODE
;
;
;	DETSW = 1	TO CHECK FOR DETACHED JOB AT TTYOUT
;		0	FOR NO CHECK (UN-NECESSARY ON STANDARD DEC SYSTEMS)
;
;
;	REQLVL = <ALLOWED DEPTH OF REQUIRE>



; REVISION HISTORY
;
; 2/16/78	CODE ADDED TO TYPE OUT CORRECT SWITCH CHARACTERS IF
;		THEY ARE GIVEN IN COMPLEMENT FORM.
;		EX: /-V,/-B,/-K,/-P
;
; 1/18/78	ROUTINE RENAM IS MODIFIED TO FIX COMPATABILITY BUG
;		ON DEC10 AND DEC20. ON DEC20, RENAME FILLS UP
;		CREATION DATE/TIME AND GIVES WRONG DATE IF
;		COMPILER FILLS UP. ON DEC10, RENAME 
;		ALWAYS FILLS UP CREATION DATE/TIME CORRECTLY.
;
; 1/11/77	ROUTINES SRCDEL AND SAVSRC ADDED.
;		BLOCK SRCBLK ADDED.
;		CALLS ON ABOVE ROUTINES ADDED.
;		AREA DELBLK DROPPED.
;
;    1/26/77	CODE ADDED TO HANDLE DEL CHARACTERS IN INPUT STREAM.
;		THEY ARE COUNTED AND DROPPED.
;
; END OF REVISION HISTORY
LOIOV==: 14	; MODULE VERSION NUMBER



IFNDEF	NONREN,	<NONREN==0>
IFNDEF	TIMSW,	<TIMSW==0>
IFNDEF	DETSW,	<DETSW==0>
IFNDEF	CMUSW,	<CMUSW==0>
IFNDEF	BLIS11,	<BLIS11==0>
IFNDEF	REQLVL,	<REQLVL==6>




REQFST==<17-REQLVL>+1		; FIRST REQUIRE CHANNEL
IFLE	<REQFST-4>,	<PRINTX ? TOO MANY REQUIRE CHANNELS
			 PASS2
			 END>

IFN	NONREN,	<RELOC>
IFE	NONREN,	<TWOSEG
		 RELOC 400000>
IFE	BLIS11,	<
	TITLE	BLISIO   -   BLISS COMPILER I/O  W.WULF & J. NEWCOMER/FLD

	IFE	CMUSW,	<
		IF1	<PRINTX LOIO  -  STANDARD VERSION>
		DEFINE	SUBTLE (STR) <
		SUBTTL	BLISIO  -  STANDARD VERSION  -  STR
		PAGE >>

	IFN	CMUSW,	<
		IF1	<PRINTX LOIO  -  CMU VERSION>
		DEFINE	SUBTLE (STR) <
		SUBTTL	BL10IO---CMU VERSION---STR
		PAGE >>
	>



IFN	BLIS11,	<
	TITLE	BL11IO  BLISS COMPILER I/O  W. WULF & J. NEWCOMER/FLD

	IFE	CMUSW,	<
		IF1	<PRINTX BL11IO MODULE  -  STANDARD VERSION>
		DEFINE	SUBTLE (STR) <
		SUBTTL	BL11IO---STANDARD VERSION---STR
		PAGE >>

	IFN	CMUSW,	<
		IF1	<PRINTX BL11IO MODULE  -  CMU VERSION>
		DEFINE	SUBTLE (STR) <
		SUBTTL	BL11IO---CMU VERSION---STR
		PAGE >>
	>




IFN	TIMSW,	<IF1	<PRINTX	TIMING TURNED ON>>

IFN	DETSW,	<IF1	<PRINTX	DETACHED JOB CHECK ENABLED>>

SUBTLE <DECLARATIONS>
	DEFINE	BLK(A,B)
<		A==	ZZ
		ZZ==	ZZ+B>

	ZZ==	0
	BLK	SEQNUM, 1	;REGISTER FOR SEQUENCE NUMBER
	BLK	PAGCNT, 1	;REGISTER FOR PAGE COUNT
	BLK	TTLBUFF, 21	;BUFER FOR PROGRAM TITLE
	BLK	XDATE, 1	;REGISTER FOR DATE OF COMPILATION
	BLK	XP, 45		;EXECUTIVE PUSHDOWN LIST
	BLK	XA, 16		;EXECUTIVE ACCUMULATOR STORAGE
	BLK	XE, 11		;EXECUTIVE OPEN ARRAY
	BLK	XB, 22		;EXECUTIVE BUFFER HEADERS

;EXTERNS AND ENTRIES

IFN BLIS11,<
EXTERN	DOPAGE		;TRUE IF NEED TO PRINT FF BEFORE BUFF
EXTERN	BUFFL>		;MAX. NO. OF CHARS PER INPUT LINE
EXTERN	.JBFF,.JBREL,.JBVER	;JOB DATA AREA FIELDS
EXTERN	BXA,BUFF,PBUFF,DEVBPT
EXTERN	PACCUM
INTERN	CCLCTL,CCLBUF,CCLBP		;CCL GLOBAL DATA
INTERN	FORCE,TTYLIST,READTEXT,INITIO	;I/O ROUTINES CALLED
INTERN	FINIO,PAGE			;  BY THE COMPILER
INTERN	BIO				;0 IF INITIO HAS NEVER BEEN CALLED
EXTERN	PUNT				;COMPILER BAD ERROR RECOVERY ROUTINE
EXTERN	REQCHN,REQDATA,REQREL
EXTERN	NOENGLISH, STARTBLOCK
EXTERN XR1COM		;=1 IF COMPACT XREF LISTING WANTED: /Q

IFE BLIS11, <
EXTERN	DEBFLG		; FLAG TO GENERATE DEBUG LINKAGE
EXTERN	ERRORFOUND	; # OF ERRORS IN PROGRAM
EXTERN  ZFLAG		; FLAG FOR SREG,FREG,VREG,DREGS,RESREGM TO OUTPUT INTO REL
INTERN	PAGER		; CALLED BY COMPILER
INTERN	RPAGE
EXTERN	MHTIME		;MASTER TIMING SWITCH
EXTERN	CODETOG	>

IFN TIMSW,<
EXTERN	TIMER  >

$F=:2
$V=:3
;BITS FOR GETCHR STATUS AND IO STATUS CALLS

	AMODE==		3		; BITS FOR ASCII AND ASCII LINE
	TTYBIT==	10		; DEVICE IS A TTY
	BMODE==		10000		; BIT FOR BINARY MODE
	IOEOF==		20000		; END OF FILE ON IO DEVICE
	IOBKTL==	40000		; IO BLOCK TOO LARGE
	IODATA==	100000		; IO DATA ERROR
	IODEV==		200000		; IO DEVICE ERROR



;ACCUMULATOR ASSIGNMENTS

	A==	2		;ARGUMENTS
	B==	1		;SCRATCH AND FILENAME CHAR CNT
	C==	13		;SCRATCH
	D==	14		;DEVICE CHANNEL NUMBER
	E==	0		;BYTE POINTER AC FOR GETCHR
	F==	12		;FLAGS
	G==	10		;SCRATCH
	H==	11		;SCRATCH
	P==	17		;PUSHDOWN ACCUMULATOR
	R==	3		;USED IN NUMOUT AND CMDCHR ROUTINES
	S==	4		;SIXBIT SYMBOL
	T==	16		;DATA AREA POINTER
	V==	15		;DATA AREA POINTER, TEMPORARY


;ACCUMULATORS USED BY THE COMPILER IN CALLS TO THE EXEC
	CH==	4		;CHANNEL NUMBER FOR READTEXT
	BU==	5		;BUFFER HEADER FOR READTEXT
	W==	6		;WORKING REGISTER FOR XCT'S
	J==	14		;USED IN CHAR ROUTINE CALLS
	K==	2		;USED IN LSTOUT CALLS
	L==	10		;USED IN LSTMES CALLS
	N==	11		;CHAR AND LSTOUT JSP ACCUMULATOR


OPDEF	PJRST	[JRST]		;


	SUBTLE <FLAG BITS>
	XLIST
IFE BLIS11, <
	LIST
;COMPILER AND EXECUTIVE FLAGS
;FLAGS SET BY EXEC, USED BY COMPILER (LEFT HALF OF AC F)
	PROFLG==	1		; PUT PROLOGS/EPILOGS IN THIS MODULE
	CCLFLAG==	2		; "CCL" DECLARATION
	TTFLAG==	4		; /T SWITCH
	GRFLG==		10		; LOAD ALL ROUTINES AS GLOBAL
	EMFLAG==	20		; ENABLE EXPAND MACRO TRACE
	NPTFLG==	40		; NO-OPTIMIZE FLAG
	SFLAG==		100		; PRINT STATS FOR B-L-I-M-P
	IFLAG==		200		; OUTPUT LUNDE DESCRIPTORS
	SRFLG==		400		; SAVE/RESTORE REGS AT EXCHJ
	BINFLG==	1000		; SUPPRESS BINARY OUTPUT
	LSTFLG==	2000		; SUPPRESS LISTING OUTPUT
	TWOFLG== 	4000            ; GENERATE GLOBALS IN LOWSEG
	MFLAG==		10000		; OUTPUT MACHINE CODE LISTING
	CANLST==	20000		; NO LISTING FILE AVAILABLE
	HGHFLG==	40000		; HISEG VERSION 
	FSAVFLG==	100000		; FORCE SAVING OF FREG ON ROUTINE ENTRY
	FINFLG==	200000		; ALL SOURCE FILES READ
	XREF==		400000		; PRINT BLISS XREF


;FLAGS SET AND USED ONLY BY THE EXEC (RIGHT HALF OF AC F)

	DEVBIT==	1		; DEVICE SEEN IN COMMAND STRING
;	??????==	2  		; UNASSIGNED
	ARWBIT==	4		; LEFT ARROW SEEN
	EXTBIT==	10		; EXPLICIT EXTENSION NAME SEEN
	SWTBIT==	20		; ENTER SWITCH MODE
	CHRBIT==	40		; SPECIAL CALL FROM CHAR ROUTINE
	INFOBIT==	100		; VALID INFORMATION SEEN
	ERRBIT==	200		; SUPPRESS ERRORS ON TTY
	FUNNY==		400		; CMU SOS PAGE FLAG
	NAMBIT==	1000		; NAME SEEN IN COMMAND STRING
	TTYLST==	2000		; LISTING DEVICE IS A TTY
	CMDLIN==	4000		; HAVE A COMMAND LINE IN THE BUFFER
	ENDBIT==	10000		; END OF ALL INPUT FILES
	SLSHBIT==	20000		; SWITCH MODE ENTERED WITH </>
;	??????==	40000		; UNASSIGNED
;	??????==	100000		; UNASSIGNED
	UNBIT==		200000		; COMPLEMENT SWITCH
	CCLBIT==	400000		; COMMAND STRING FROM CCL FILE


INITFLGS==BINFLG+LSTFLG+CANLST+TWOFLG+SRFLG

	XLIST  >
IFN BLIS11, <
	LIST
;COMPILER AND I/O ROUTINE FLAGS

;
;LEFT HALF OF AC F
;  FLAGS SET BY SWITCHES IN COMMAND STRING
;
;	??????==	1		; UNASSIGNED
	EMFLG==		2		;1-LIST MACRO EXPANSIONS
	NPTFLG==	4		;1-NO-OPTIMIZE FLAG
	SFLG==		10		;1-LIST COMPILER STATISTICS
	BINFLG==	20		;1-SUPPRESS BINARY OUTPUT
	LSTFLG==	40		;1-SUPPRESS LISTING OUTPUT
	MLFLG==		100		;1-LIST MACHINE CODE
	PICSW==		200		;1-PRODUCE POS. INDEPENDENT CODE
	XREFLG==	400		;1-PRODUCE BLISS XREF LISTING
	ERRBIT==	1000		;1-SUPPRESS ERROR PRINT OUTS ON TTY

;
;RIGHT HALF OF AC F
;  FLAGS SET AND USED MOSTLY BY THE I/O ROUTINES
;
	DEVBIT==	1		;1-DEVICE SEEN IN COMMAND STRING
;	??????==	2  		; UNASSIGNED
	ARWBIT==	4		;1-LEFT ARROW SEEN
	EXTBIT==	10		;1-EXPLICIT EXTENSION NAME SEEN
	SWTBIT==	20		;1-ENTER SWITCH MODE
	CHRBIT==	40		;1-SPECIAL CALL FROM CHAR ROUTINE
	INFOBIT==	100		;1-VALID INFORMATION SEEN
	FINFLG==	200		;1-ALL SOURCD FILES READ
;	??????==	400		; UNASSIGNED
	NAMBIT==	1000		;1-NAME SEEN IN COMMAND STRING
	TTYLST==	2000		;1-LISTING DEVICE IS A TTY
	TTYONB==	4000		;1-TTY HAS BEEN INITIALIZED
	ENDBIT==	10000		;1-END OF ALL INPUT FILES
	SLSHBIT==	20000		;1-SWITCH MODE ENTERED WITH </>
;	??????==	40000		; UNASSIGNED
	FUNNY==		100000		;1-IF PROCESSING FUNNY SOS EDITOR PAGE MARK
	UNBIT==		200000		;1-COMPLEMENT SWITCH
	CCLBIT==	400000		;1-COMMAND STRING FROM CCL FILE


INITFLGS==BINFLG+LSTFLG


EXTERNAL	NOTREE		;TRUE IFF SYNTAX ONLY
  >
	LIST

SUBTLE <INITIALIZATION>
RENBIO:	MOVEM	N,BIO		;STORE RETURN ADDRESS
F4EXEC:	RESET			;INITIALIZE ALL IO DEVICES
	HRLZ	T, .JBREL	;PUT HIGHEST ADDRESS IN LEFT HALF
	HRR	T, .JBFF	;BEGINNING OF IMPURE AREA IN RH
	HRLZI	P, XP-XA	;GET A COUNT FOR PUSHDOWN LIST
	HRRI	P, XP-1(T)	;GET PUSHDOWN LIST ADDRESS
	MOVEI F, 0		;INITIALIZE SWITCHES
	TLO	F, INITFLGS
	SETZM	DEBFLG
	SETZM	SAVBLK
	SKIPE	CCLCTL		; CCL SWITCH SET?
	TRO	F,CCLBIT	; YES...SET CCL CONTROL BIT
	MOVE	B,BLANKS	;BLANK OUT SEQUENCE NO. FIELD
	MOVEM	B,SEQNUM(T)
	MOVEI	B, REQFST-1
	MOVEM	B,REQCHN	;INITIAL REQUIRE CHANNEL (MINUS ONE)
IFE BLIS11,<SETZM RPAGE>
	SETZM	SOSPGC
	AOS	SOSPGC
	SETZM	PPNPERM		; CLEAR PPN 
	MOVE	B,NAME1
	MOVEM 	B,TTLBUF(T)
	MOVE	B,NAME2
	MOVEM	B,TTLBUF+1(T)
;THE RESTRT ROUTINE PERFORMS THE FOLLOWING TASKS BEFORE BEGINNING
;A NEW COMPILATION:
;	1. OBTAINS THE DATE AND TIME FROM THE MONITOR
;	2. SETS THE LINE COUNT AND PAGE COUNT FOR THE LISTING
;	   FILE TO ZERO
;	3. FILLS THE TITLE BUFFER WITH ASCII BLANKS
;	4. INITIALIZES THE FLAG AC BY CLEARING ALL BITS, THEN
;	   SETTING BITS FOR SUPPRESSION OF BIN AND LST OUTPUT
;	5. CLEARS THE DEVICE CHANNEL NUMBER ACCUMULATOR
;	6. INITIALIZES THE SWITCH BUFFER COUNTER TO ZERO
;THE SECTION OF CODING JUST PRIOR TO GETLIN UPDATES .JBFF SO
;THAT IT WILL POINT TO THE BEGINNING OF THE IO BUFFERS - I.E.
;ROOM IS MADE FOR THE JOB DATA AREA, THE EXEC FIXED TABLES,
;AND THE COMPILER VARIABLE DATA AREA.
; REFERENCES ARE MADE TO .JBFF INDEXED BY AC 16.
;.JBFF ITSELF IS LEFT UNALTERED EXCEPT DURING TEMPORARY CALLS
;TO THE MONITOR FOR INBUFS AND OUTBUFS. THE ACTUAL UPDATED
;STATE OF .JBFF IS LEFT IN REGISTER XA+F IN THE IMPURE AREA .


	HRRZ A, .JBFF
	ADDI A,	140
	HRRM A, TTOBUF
	ADDI A, 30
	HRRM A,XA+F(T)
	HRLI	V, T		;SET UP AC V FOR INDEXING
	SETOM	PAGCNT(T)	;INITIALIZE THE PAGE NUMBER
	DATE	A,		;GET THE DATE FROM THE MONITOR
	MOVEM	A, XDATE(T)	;SAVE IT
	SETZM	BINFIL		; INDICATE WE ARE STARTING
	MOVE	A,PACCUM	; SAVE PACCUM POINTER
	MOVEM	A,SAVP		; IN CASE DEVICE SPECIFIED
	SETZI	D,		;
	TRNE	F,CCLBIT	; WE GOT CCL?
	JRST	CCLIN1		; YES...SKIP PROMPT


IFN BLIS11,<PUSHJ P,EXPOUT	;EXPERIMENTAL MESSAGE>
	MOVEI A, "*"
	OUTCHR	A		; GIVE PROMPT
	JRST	GETCH2		; GO ON AND READ STUFF


CCLIN1: SETZM	XB+14(T)	; BUFFER PTR _ 0
	SETZM	XB+16(T)	; CHAR COUNT _ 0
	MOVE	A,CCLBP		; GET BYTE POINTER
	MOVEM	A,XB+15(T)	; FAKE IT OUT


SUBTLE <COMMAND DECODE>
;EXEC COMMAND STRING DISPATCHING
;THIS ROUTINE PICKS UP CHARACTERS FROM THE EXEC TTY BUFFER AND
;DISPATCHES TO THE PROPER ROUTINE DEPENDING ON THE TYPE OF
;CHARACTER. A TABLE OF BYTES AND BYTE POINTERS ALLOWS EACH CHARAC-
;TER IN THE ASCII SET TO BE TREATED INDIVIDUALLY.
;THE ROUTINE MAY BE ENTERED AT GETCHR IF IT IS DESIRED TO 
;ACCUMULATE A 6-LETTER SIXBIT SYMBOL IN AC S. SYMBOLS OF
;DIFFERENT LENGTHS MAY BE ACQUIRED BY SETTING THE CONTENTS OF
;AC B TO THE DESIRED LENGTH AND ENTERING AT GETCH1.

GETCH2:	SETZM	PPNVAL		; CLEAR LAST TTEMP PPN
	TRZ	F,  DEVBIT!EXTBIT
GETCHR:	MOVEI	B, 6		;INITIALIZE SYMBOL LENGTH COUNTER
GETCH1:	MOVEI	S, 0		;INITIALIZE SYMBOL ACCUMULATOR
	TRZ	F, NAMBIT
	MOVE	E, SYMPTR	;INITIALIZE SYMBOL BYTE AC

GETCMN:	PUSHJ	P, CMDCHR	; GET CHARACTER
	JUMPN	A, GETCM0	; NULL?
	TRNE	F, CCLBIT	; YES - IN CCL?
	EXIT			; YES - DONE
GETCM0:	MOVE	G, A		;ANOTHER COPY OF IT IN AC G
	IDIVI	G, 11		;TRANSLATE TO 4-BIT CODE
	LDB	G, TABLE(H)	;USE PROPER BYTE POINTER
	CAIN	G, 17		;IGNORE THIS CHARACTER?
	JRST	GETCMN		;YES
	CAIGE	G, 5		;MODIFY CODE IF .GE. 5
	JRST	.+3
	TRNE	F, SWTBIT	;CODE .GE. 5 IN SWITCH MODE IS ILLEGAL
	JRST	ERR1
	TRNN	F, SWTBIT	;MODIFY CODE IF SWITCH MODE
	ADDI	G, 5
	HRRZ	H, DSPTCH(G)	;LOAD RIGHT HALF DISPATCH
	CAIL	G, 12		;SKIP IF CORRECT
	HLRZ	H, DSPTCH-12(G)	;GET LEFT HALF DISPATCH
	JRST	@H		;EXIT
;COMMAND DISPATCH TABLE AND BYTE POINTERS
DSPTCH:	XWD	SWTCH,ERR1	;<(>, BAD CHAR(SWITCH)
	XWD	COLON,SWTCHA	;<:>, LETTER(SWITCH)
	XWD	PERIOD,ERR1	;<.>, NUMBER(SWITCH)
	XWD	LFTARW,SWTCHE	;<_> OR <=>, <)> ESCAPE SWITCH MODE
	XWD	COMMA,UNSWITCH	;<,>, <-> NOT(SWITCH)
	XWD	CARRTN,ERR2	;<CR>, BAD CHAR(NORMAL)
	XWD	SLASH,STORE	;</>, LETTER(NORMAL)
	XWD	CCLLINK,STORE	;<!> OR <#>, NUMBER(NORMAL)
	XWD	0,ERR2		;<@>, <)> ILLEGAL ESCAPE
	XWD	PPN,ERR2	;<[>, <-> ILLEGAL NOT

TABLE:	POINT	4, BITE(G), 3
	POINT	4, BITE(G), 7
	POINT	4, BITE(G), 11
	POINT	4, BITE(G), 15
	POINT	4, BITE(G), 19
	POINT	4, BITE(G), 23
	POINT	4, BITE(G), 27
	POINT	4, BITE(G), 31
	POINT	4, BITE(G), 35
;BYTE TABLE FOR DISPATCHING
;CLASSIFICATION BYTE CODES

;	BYTE	DISP	CLASSIFICATION

;	00	00	ILLEGAL CHARACTER, SWITCH MODE
;	01	01	ALPHABETIC CHARACTER, SWITCH MODE
;	02	02	NUMERIC CHARACTER, SWTICH MODE
;	03	03	SWITCH MODE ESCAPE, SWITCH MODE
;	04	04	NOT CHARACTER, <->, SWITCH MODE

;	00	05	ILLEGAL CHARACTER, NORMAL MODE
;	01	06	ALPHABETIC CHARACTER, NORMAL MODE
;	02	07	NUMERIC CHARACTER, NORMAL MODE
;	03	10	SWITCH MODE ESCAPE, NORMAL MODE
;	04	11	NOT CHARACTER, <->, NORMAL MODE

;	05	12	ENTER SWITCH MODE WITH A <(>
;	06	13	DEVICE DELIMITER, <:>
;	07	14	FILE EXTENSION DELIMITER, <.>
;	10	15	OUTPUT SPEC. DELIMITER, <_> OR <=>
;	11	16	FILE DELIMITER, <,>
;	12	17	COMMAND TERMINATOR, VERT. MOVEMENT CHAR OR ALT
;	13	20	ENTER SWITCH MODE WITH </>
;	14	21	CCL FILE DELIMITER, <!> OR <#>
;	15	22	-RESERVED- FOR INDIRECT FILE <@>
;	16	23	START PPN, <[>
;	17	--	IGNORED CHARACTER

;BYTE TABLE:

BITE:	BYTE	(4) 17,0,0,0,0,0,0,0,17
	BYTE	(4) 17,12,12,12,17,0,0,0,0
	BYTE	(4) 0,0,0,0,0,0,0,0,12
	BYTE	(4) 12,0,0,0,0,17,14,17,14
	BYTE	(4) 0,0,0,0,5,3,0,0,11
	BYTE	(4) 4,7,13,2,2,2,2,2,2
	BYTE	(4) 2,2,2,2,6,0,0,10,0
	BYTE	(4) 0,0,1,1,1,1,1,1,1
	BYTE	(4) 1,1,1,1,1,1,1,1,1
	BYTE	(4) 1,1,1,1,1,1,1,1,1
	BYTE	(4) 1,16,0,0,0,10,0,0,0
	BYTE	(4) 0,0,0,0,0,0,0,0,0
	BYTE	(4) 0,0,0,0,0,0,0,0,0
	BYTE	(4) 0,0,0,0,0,0,0,0,12
	BYTE	(4) 0,17
;THE FOLLOWING TWO ROUTINES HANDLE ALPHANUMERIC CHARACTERS
;FOUND IN THE COMMAND STRING. IN NORMAL MODE, THE CHARACTER
;IS DEPOSITED TO FORM A SIXBIT SYMBOL. IN SWITCH MODE, THE
;PROPER INSTRUCTION IS EXECUTED WITH THE AID OF A DISPATCH
;TABLE. THEN, IF SWITCH MODE WAS ENTERED WITH A SLASH, THE
;EXEC EXITS FROM SWITCH MODE. ALSO, IF THE SWITCH BEING PRO-
;CESSED IS IN A STANDARD DEFINITION, THE CHARACTER IS STORED.

STORE:	TRO	F, INFOBIT+NAMBIT	;TURN ON BIT FOR CR ROUTINE
	SKIPN	BINFIL		; IF BIN FILE ID WE SAVE
	IDPB	A,PACCUM	; THE CHARS AS THE MODULE NAME
				; THIS MIGHT BE THE DEVICE NAME
				; BUT IF WE HIT ":" WE WILL RESET IT
	SOJL	B, GETCMN	;JUMP IF NO ROOM FOR CHAR
	SUBI	A, 40		;CONVERT FROM ASCII TO SIXBIT
	IDPB	A, E		;STORE CHARACTER IN E
	JRST	GETCMN		;RETURN FOR NEXT CHARACTER


SUBTLE <SWITCH PROCESSOR>
SWTCHA:	TRO	F, INFOBIT	;TURN ON FLAG FOR C.R.
	MOVE	G, A		;MOVE SWITCH CHARACTER INTO SCRATCH REG 2/16/78
	TRNE	F,UNBIT		; ARE WE COMPLEMENTING A SWITCH?  2/16/78
	ADDI	G,^D26		; YES--USE SECOND DISPATCH TABLE
	XCT	SLIST-101(G)	;EXECUTE PROPER SWITCH INSTRUCTION
	TRZ	F,UNBIT		;CLEAR COMPLEMENT BIT  2/16/78
	TRZE	F, SLSHBIT	;CALLED BY A SLASH?
	TRZ	F, SWTBIT	;YES, EXIT FROM SWITCH MODE
	JRST	GETCMN		;RETURN FOR MORE CHARACTERS


;THE FOLLOWING THREE ROUTINES HANDLE THE CONTROL CHARACTERS
;IN THE COMMAND STRING WHICH CAUSE THE EXEC TO ENTER INTO AND
;EXIT FROM SWITCH MODE. THERE ARE TWO TYPES OF SWITCH MODE,
;DEPENDING ON WHETHER IT IS ENTERED WITH A </> OR A <(>.

SLASH:	TRO	F, SLSHBIT	;ENTER SWITCH MODE WITH A </>

SWTCH:	TROA	F, SWTBIT	;ENTER SWITCH MODE WITH A <(>
SWTCHE:	TRZ	F, SWTBIT	;EXIT FROM SWITCH MODE WITH A <)>
	JRST	GETCMN		;RETURN FOR MORE CHARACTERS

UNSWITCH:TROE	F, UNBIT	;TURN ON NOT INDICATOR
	JRST	ERR1		;ILLEGAL IF ALREADY ON
	JRST	GETCMN		;RETURN FOR MORE CHARACTERS


XLIST
IFE BLIS11,<
LIST
SUBTLE <SWITCH DISPATCH TABLES>

;DISPATCH TABLE

SLIST:	SETZM	NOENGLISH	;A - ENGLISH DIAGNOSTICS
	SETOM	STARTBLOCK	;B - PUT START BLOCK ON REL FILE
	TLO	F,XREF		;C - BLISS XREF PLEASE
	PUSHJ	P,DEBON		;D - DEBUG LINKAGE ON
	TLO	F,EMFLAG	;E - ENABLE EXPAND MACRO FLAG
	TLO	F,FSAVFLG	;F - SAVE FREG
	TLO	F,GRFLG		;G - LOAD ALL ROUTINES AS GLOBAL
        TLC     F,TWOFLG+HGHFLG ;H - HIGH SEGMENT PROGRAM FILE
	TLO	F,IFLAG		;I - LUNDE DESCRIPTORS
	JRST	ERR1		;J - ERROR
	TLO	F,LSTFLG	;K - KILL THE LISTING
	TLZ	F,LSTFLG	;L - ENABLE LISTING
	TLO	F,MFLAG		;M - MACHINE LANG. LIST ENABLE
	TRO	F,ERRBIT	;N - SUPPRESS ERRORS TO TTY
	TLZ	F,NPTFLG	;O - OPTIMIZE SWITCH
	TLO	F,PROFLG	;P - PROLOGS IN THIS MODULE
	SETOM	XR1COM		;Q - WITH /C MAKES COMPACT XREF
	TLZ	F,SRFLG		;R - NO SAV/RESTORE AT EXCHJ
	TLO	F,SFLAG		;S - B-L-I-M-P STATS
	PUSHJ	P,TENABLE	;T - ENABLE TRACE/TIMING 
	TLO	F,NPTFLG	;U - NO OPTIMIZATION
        TLC     F,TWOFLG        ;V - LOW SEGMENT PROGRAM FILE
	JRST	ERR1		;W - ERROR
	SETZM	CODETOG		;X - SYNTAX CHECK ONLY SWITCH
	JRST	ERR1		;Y - ERROR
	SETOM	ZFLAG		;Z - OUTPUT INTO REL SREG,VREG,FREG,DREGS,RESREGM

;COMPLEMENT DISPATCH TABLE
	SETOM	NOENGLISH	; -A - MNEMONIC ERROR MESSAGES ONLY
	JRST	ERR1		; -B - ERROR
	TLZ	F,XREF		; -C - TURN OFF XREF
	SETZM	DEBFLG		; -D - DEBUG LINKAGE OFF
	TLZ	F,EMFLAG	; -E - DON'T EXPAND MACROS
	TLZ	F,FSAVFLG	; -F - DON'T FORCE SAVING OF FREG
	TLZ	F,GRFLG		; -G - DO NOT LOAD LOCAL ROUTINES AS GLOBAL
	JRST	ERR1		; -H - CANNOT DISABLE /H
	TLZ	F,IFLAG		; -I - NOINSPECT
	JRST	ERR1		; -J - ERROR
	JRST	ERR1		; -K - ERROR
	TLO	F,LSTFLG	; -L - TURN OFF LISTING
	TLZ	F,MFLAG		; -M - TURN OFF MACHINE CODE
	TRZ	F,ERRBIT	; -N - RE-ENABLE ERRORS TO TTY
	TLO	F,NPTFLG	; -O - NO OPTIMIZATION
	JRST	ERR1		; -P - ERROR
	JRST	ERR1		; -Q - ERROR
	TLO	F,SRFLG		; -R - YES SAV/RESTOR AT EXCHJ
	TLZ	F,SFLAG		; -S - NO B-L-I-M-P STATS
	PUSHJ	P,TDISABLE	; -T - NO TRACE/TIMING
	JRST	ERR1		; -U - ERROR
	JRST	ERR1		; -V - CANNOT DISABLE /V
	JRST	ERR1		; -W - ERROR
	JRST	ERR1  		; -X - CANNOT RE-ENABLE CODE GEN.
	JRST	ERR1		; -Y - ERROR
	SETZM	ZFLAG		; -Z - DONOT OUTPUT SREG,VREG,FREG,DREGS,RESREGM INTO REL

DEBON:	SETOM	DEBFLG		; TURN ON DEBUG FLAG
	TLO	F,FSAVFLG	; ALSO MUST DO /F
	POPJ	P,

TENABLE:TLO	F,TTFLAG	; TURN ON TTFLAG
	MOVEI	A,1		; AND MHTIME
	MOVEM	A,MHTIME	; ...
	POPJ	P,

TDISABLE:TLZ	F,TTFLAG	; TURN OFF TTFLAG
	SETZM	MHTIME		; AND MHTIME
	POPJ	P,
XLIST  >
IFN BLIS11,<
LIST
SUBTLE <SWITCH DISPATCH TABLES>
;DISPATCH TABLE

SLIST:	JRST	ERR1		;A - ERROR
	JRST	ERR1		;B - ERROR
	TLO	F, XREFLG	;C - BLISS XREF PLEASE
	JRST	ERR1		;D - ERROR
	TLO	F, EMFLG	;E - LIST MACRO EXPANSIONS
	JRST	ERR1		;F - ERROR
	JRST	ERR1		;G - ERROR
	JRST	ERR1		;H - ERROR
	JRST	ERR1		;I - ERROR
	JRST	ERR1		;J - ERROR
	JRST	ERR1		;K - ERROR
	TLZ	F, LSTFLG	;L - ENABLE LISTING
	TLO	F, MLFLG	;M - ENABLE MACH. LANG. LISTING
	TLO	F, ERRBIT	;N - SUPPRESS ERRORS TO TTY
	TLZ	F, NPTFLG	;O - OPTIMIZE
	TLO	F, PICSW	;P - POSITION INDEPENDENT CODE
	JRST	ERR1		;Q - ERROR
	JRST	ERR1		;R - ERROR
	TLO	F, SFLG		;S - LIST COMPILER STATISTICS
	JRST	ERR1		;T - ERROR
	JRST	ERR1		;U - ERROR
	JRST	ERR1		;V - ERROR
	JRST	ERR1		;W - ERROR
	SETOM	NOTREE		;X - SYNTAX CHECK ONLY
	JRST	ERR1		;Y - ERROR
	JRST	ERR1		;Z - ERROR
;COMPLEMENT DISPATCH TABLE

	JRST	ERR1		; -A - ERROR
	JRST	ERR1		; -B - ERROR
	TLZ	F, XREFLG	; -C - TURN OFF XREF
	JRST	ERR1		; -D - ERROR
	TLZ	F, EMFLG	; -E - TURN OFF MACRO EXPANSION LISTING
	JRST	ERR1		; -F - ERROR
	JRST	ERR1		; -G - ERROR
	JRST	ERR1		; -H - ERROR
	JRST	ERR1		; -I - ERROR
	JRST	ERR1		; -J - ERROR
	JRST	ERR1		; -K - ERROR
	TLO	F, LSTFLG	; -L - TURN OFF LISTING
	TLZ	F, MLFLG	; -M - TURN OFF MACH. CODE LISTING
	TLZ	F, ERRBIT	; -N - RE-ENABLE ERRORS TO TTY
	TLO	F, NPTFLG	; -O - NO OPTIMIZATION
	TLZ	F, PICSW	; -P - DON'T BOTHER WITH POSITION IND. CODE
	JRST	ERR1		; -Q - ERROR
	JRST	ERR1		; -R - ERROR
	TLZ	F, SFLG		; -S - STOP LISTING COMPILER STATISTICS
	JRST	ERR1		; -T - ERROR
	JRST	ERR1		; -U - ERROR
	JRST	ERR1		; -V - ERROR
	JRST	ERR1		; -W - ERROR
	JRST	ERR1		; -X - CANNOT RE-ENABLE CODE GEN.
	JRST	ERR1		; -Y - ERROR
	JRST	ERR1		; -Z - ERROR
  >
LIST
SUBTLE <RUN (! OR #) REQUEST>
;	THIS ROUTINE PROCESSES THE "!" AND "#" RUN REQUESTS



IFE NONREN,	<RELOC>


CCLLIN:	SKIPN	BINFIL		;IS THIS FIRST FILE SPECIFICATION
	TRNN	F, INFOBIT	;AND WAS SOMETHING SEEN
	JRST	ERR2		;NO, ERROR
	CAIE	A,"!"		; CCL (!) OR DIRECT (#) ENTRY
	TLZA	S-2,-1		; CLEAR LEFT AND SKIP (FOR #)
	MOVSI	S-2,1		; SET LEFT TO 1 (FOR !)
	HRRI	S-2,S-1		; POINTER TO CONTROL BLOCK
	HRLZI	S-1,(SIXBIT /SYS/);SET UP DEFAULT DEVICE
	TRNE	F, DEVBIT	;WAS A DEVICE SPECIFIED?
	MOVE	S-1, XE+1(T)	;YES, USE IT
	SETZ	S+1,		;ZERO EXTENSION
	SETZB	S+2, S+4	;ZERO OTHER CRUD
	TRNE	F, EXTBIT	;WAS EXTENSION SPECIFIED
	HLL	S+1, XE+4(T)	;YES, USE IT
	SKIPN	S+3, PPNVAL	;USE PPN IF THERE IS ONE
	MOVE	S+3, PPNPERM
	MOVEI	0, CCLAST	; SAVE ONLY WHAT'S NECESSARY
	CORE	0,
	JFCL			; IGNORE ERROR RETURN
	RUN	S-2,
CCLAST:	HALT	.		; WE BLEW IT


IFE NONREN,	<RELOC>

SUBTLE <PPN PROCESSING>

PPN:	PUSH	P,E		; SAVE E
	PUSH	P,S		; SAVE S
	PUSH	P, S+1		;SAVE S+1
	PUSH	P, S+2
	SETZM	PPNBUFF		;CLEAR PPN BUFFER
	SETZM	PPNBUFF+1
	SETZM	PPNBUFF+2
	MOVE	S, [POINT 7,PPNBUFF]
IFN CMUSW,<
	MOVE	A, XB+15(T)	;COPY INPUT BUFFER POINTER
	ILDB	A, A
	CAIL	A, "0"		;IS FIRST CHAR OCTAL DIGIT?
	CAILE	A, "7"
	JRST	PPNCMU		;NO SO THIS IS CMU PPN  >
	SETZ	S+2,		;COLLECT DEC PPN
PPNL1:	MOVEI	S+1,6
	SETZ	E,


PPNLOOP: PUSHJ	P, CMDCHR	; GET A CHARACTER
	CAIN	A,"]"		; END OF PPN?
	JRST	PPNGOT		; YES---WE GOT ONE
	IDPB	A, S		;SAVE THE CHAR IN THE PPN BUFFER
	CAIN	A,","		; IS IT A ","?
	JRST	PPNCOM		; YES---PROCESS IT
	SOJL	S+1,ERR4
	CAIL	A,"0"
	CAILE	A,"7"
	JRST	PPNERR
	LSH	E, 3
	ADDI	E, -"0"(A)	; ADD NEXT CHARACTER
	HRRM	E,PPNVAL
	JRST	PPNLOOP

PPNCOM:	JUMPN	S+2,PPNERR
	MOVSS	PPNVAL
	MOVEI	S+2,1
	JRST	PPNL1
PPNGOT:	TRNE	F,DEVBIT+EXTBIT+NAMBIT	;ANYTHING BEFORE THIS?
	JRST	PPNTMP		; YES---TEMPORARY PPN
	MOVE	S,PPNVAL	; GET THE PPN
	MOVEM	S,PPNPERM	; MAKE IT PERMANENT
PPNTMP:	POP	P, S+2
	POP	P,S+1		; RESTOR S+1
	POP	P,S		; RESTORE S
	POP	P,E		; RESTORE E
	JRST	GETCMN
IFN CMUSW,<
PPNCMU:	MOVEI	S+1, 10		;MAX NO. OF CHARS PER PPN

PPNCM1:	PUSHJ	P, CMDCHR	; GET A CHARACTER
	CAIN	A, "]"		;END OF PPN?
	JRST	PPNCVT		;YES, GO CONVERT IT
	SOJL	S+1, ERR4
	IDPB	A, S
	CAIL	A, "0"		;CHAR MUST BE ALPHABETIC OR NUMERIC
	CAILE	A, "Z"
	JRST	PPNERR
	CAILE	A, "9"
	CAIL	A, "A"
	JRST	PPNCM1
	JRST	PPNERR

PPNCVT:	HRRI	S, PPNBUFF	;CONVERT PPN TO DEC PPN
	HRLI	S, PPNVAL
	CALL	S, [SIXBIT /CMUDEC/]
	JRST	PPNERR
	JRST	PPNGOT  >

SUBTLE	<PROCESSORS FOR CR/LF,"_","=",".",":">
;SUBROUTINE TO HANDLE THE OUTPUT SPECIFICATION DELIMITER <_>
;OR <=>. THE ROUTINE DOES A LOOKUP ON THE FILE NAME PRECEDING
;IT, IF NECESSARY, SINCE THE <_> ACTS ALSO AS A FILE NAME
;DELIMITER. THE CHANNEL NUMBER IS RESET FOR INPUT.



LFTARW:	AOS	BINFIL		; INDICATE WE HAVE FINISHED REL AND LST FILES
IFN BLIS11,<
	MOVEI	D, 1		;TEMPORARILY MAKE SINGLE FILE BE LISTING FILE
	>
	PUSHJ	P,LOOKUP	; YES---GO LOOK IT UP
	MOVEI	D,2		; SDT D FOR INPUT
	TRO	F,ARWBIT	; SET FLAGS
	JRST	GETCH2		; RETURN FOR NEXT SPEC
;SUBROUTINE TO HANDLE THE FILE NAME EXTENSION DELIMITER <.>
;THE EXTENSION BIT IS TURNED ON WHENEVER A PERIOD IS SEEN.
;THE FILE NAME IS STORED IN THE LOOKUP BLOCK, THE CHARACTER COUNTER
;IS RESET TO 3, AND GETCHR IS ENTERED TO COLLECT AN EXTENSION.

PERIOD:	TROE	F, EXTBIT	;TURN ON THE EXTENSION BIT
	JRST	ERR18		; ALREADY SEEN
	MOVEM	S, XE+3(T)	;SAVE FILE NAME
	MOVEI	B, 3		;SET COUNT TO 3
	JRST	GETCH1	;GO COLLECT EXTENSION NAME


CARRTN:	TRZ	F, CMDLIN	; END OF TTY INPUT LINE
	MOVE	A,XB+15(T)	; GET BYTE POINTER
	MOVEM	A,CCLBP		; SAVE IT IN CASE WE'RE IN CCL MODE
	TRNN	F, INFOBIT	;ANY VALID INFORMATION SEEN?
	JRST F4EXEC
	TRO	F, ENDBIT	;END OF ALL INPUT FILES
	PUSHJ	P, LOOKUP	; YES, DO A LOOKUP
	TRNE	F, ARWBIT	;TEST COMMAND STRING SYNTAX
	CAIE	D, 3		;...
	JRST	ERR4		;ERROR
CAR2:	TRNN	F,CCLBIT	; ARE WE IN CCL MODE?
	JRST	@BIO

	OUTSTR	PROCRM		; YES, GIVE MESSAGE 
	MOVE	S,XE+3(T)	; FILE NAME
	PUSHJ	P,STYPO
	MOVEI	A,"."		; DOT
	OUTCHR	A
	HLLZ	S,XE+4(T)	; EXTENSION
	PUSHJ	P,STYPO		; TYPE IT TOO
	OUTSTR	[BYTE(7)15,12]

IFN BLIS11,<PUSHJ P,EXPOUT	;EXPERIMENTAL MESSAGE>
	JRST	@BIO		; DONE FINALLY.


IFN BLIS11,<
EXPOUT:	SKIPE	.JBDDT		;IS DDT LOADED?
	POPJ	P,0		;YES - NO MESSAGE
	MOVEI	L,EXPMES
	PJRST	TTYMES	>
  
PROCRM:
IFE BLIS11,< ASCIZ /BLISS: />
IFN BLIS11,< ASCIZ /BLIS11: />
;THE COLON ROUTINE IS CALLED WHENEVER THE EXEC FINDS A <:>
;IN THE COMMAND STRING. ROUTINE DEVINI IS CALLED BY VARIOUS
;PARTS OF THE EXEC TO CALCULATE BUFFER HEADERS AND PERFORM
;THE ACTUAL INITIALIZATION. A DEVICE MAY BE INITIALIZED AS
;FOLLOWS:
;	PUSHJ	P, DEVINI
;	SIXBIT SYMBOL NAME IN AC S
;	DESIRED CHANNEL NUMBER IN AC D

COLON:	TROE	F, DEVBIT	;COLON ALREADY SEEN?
	JRST	ERR4		;YES, COMMAND ERROR
	MOVEM	S, XE+1(T)	;SAVE DEVICE NAME FOR LATER
	JUMPN	D, GETCHR	;IS THIS .REL FILE?  NO, RETURN
	MOVE	A,SAVP		; YES...RESTOR PACCUM POINTER
	MOVEM	A,PACCUM	; 
	HRREI	B,-2		; NULL STRING VALUE
	MOVEM	B,0(A)		; CLEAR FIRST WORD OF PACCUM
	MOVEM	B,1(A)		; CLEAR SECOND WORD OF PACCUM
	JRST	GETCHR		; GO GET FILE NAME

SUBTLE	<DEVICE INITIALIZATION>
DEVINI:	MOVEI	S+1, 3		;CALCULATE BUF HEADER POS.
	IMUL	S+1, D		;...
	ADDI	S+1, XB(T)	;THIS IS THE TYPE 1 PART
	MOVE	G, S		;GET DEVICE CHARACTERISTICS
	MOVEM	S, XE+1(T)	;SAVE DEVICE FOR ERROR ROUTINES
	DEVCHR	G,		;GET DEVICE CHARACTERISTICS
	JUMPE	G, ERR11	;NO SUCH DEVICE?
	CAIN	D, 1		;CHECK TO SEE IF DEVICE CAN
	TLNN	G, 1		;DO INPUT OR OUTPUT PROPERLY
	TLNE	G, -1(D)	;...
	JRST	@DEVLST-1(D)	;GOOD - GO
	JRST	ERR15		;NOT-SO-GOOD


DEVINB:	MOVSS	S+1		;SWAP HEADER FOR OUTPUT
DEVIN1:	SETZI	S-1,		; ASCII MODE
	CAIN	D, 1		;IS THIS THE BINARY DEVICE?
	MOVEI	S-1, 10		;YES, CHANGE MODE TO IMAGE
	HRLZI	S+2, (OPEN)
	DPB	D, [POINT 4,S+2,12]	; FORM OPEN UUO
	HRRI	S+2, S-1	; ADR OF BLK
	XCT	S+2		;
	JRST	ERR3		; NO GOOD

	MOVE	B, XA+F(T)	;GET UPDATED .JBFF FROM BUFFER
	EXCH	B, .JBFF	;LET THE MONITOR PLAY WITH IT
	MOVE	A, [OUTBUF 1]
	CAIN	D, 3		; INPUT DEVICE?
	MOVE	A, [INBUF 1]
	DPB	D, CHPTR	;SET UP THE CHANNEL NUMBER
	XCT	A		;EXECUTE THE OUTBUF OR INBUF
	EXCH	B, .JBFF	;PUT OLD .JBFF BACK AGAIN
	MOVEM	B, XA+F(T)	;SAVE NEW UPDATED .JBFF
	POPJ	P,		;DONE
;SECTION DEVIN4 INITIALIZES THE SOURCE DEVICE. IT TESTS THE
;SYNTAX OF THE COMMAND STRING FOR POSSIBLE ERRORS, AND PUTS
;THE BUFFER FOR THIS DEVICE ON TOP OF ANY PREVIOUS SOURCE
;DEVICES THAT MAY HAVE BEEN EXECUTED. A POINTER IS SAVED TO
;LOCATE THE POSITION OF THIS BUFFER. IF THE SOURCE DEVICE
;DOES NOT HAVE A DIRECTORY, THE SCAN OF THE COMMAND STRING IS
;STOPPED, AND CONTROL TRANSFERS TO THE CHAR ROUTINE.
;A CHECK IS ALSO MADE TO SEE IF THE DEVICE CAN BE PROPERLY
;INITIALIZED IN ASCII OR ASCII LINE MODE.


DEVIN4:	TRNN	F, ARWBIT
	JRST	ERR4		;NO, ERROR CONDITION
	HRRZ	A, XA+F(T)	;RESET .JBFF FOR SOURCE DEVICE
	MOVEM	A, XB-1(T)	;SAVE IT
	TRNN	G, AMODE	;CAN DEVICE HANDLE ASCII MODE?
	JRST	ERR17		;NO, ERROR
	PJRST	DEVIN1		;INITIALIZE SOURCE DEVICE AND EXIT




;SECTION DEVIN5 INITIALIZES THE LISTING DEVICE. IT CHECKS TO
;SEE IF THE DEVICE IS A TELTYPE, AND, IF SO, SETS A FLAG FOR
;THE LSTOUT, LSTMES, ERROUT AND ERRMES ROUTINES
;THE ROUTINE ALSO CHECKS TO SEE IF THE DEVICE CAN BE PROPERLY
;INITIALIZED IN ASCII OR ASCII LINE MODE.


DEVIN5:	TLNE	G, TTYBIT	;YES, SET FLAG FOR IO ROUTINES
	TRO	F, TTYLST	;YES, SET FLAG FOR IO ROUTINES
	TRNN	G, AMODE	;CAN DEVICE HANDLE ASCII MODE?
	JRST	ERR17		;NO, ERROR
	TLZ	F,LSTFLG+CANLST	; YES--TURN ON LIST AND CANLST FLAGS
	JRST	DEVINB		; AND GO ON



DEVIN6:	TRNN	G, BMODE	;CAN DEVICE HANDLE BINARY MODE?
	JRST	ERR17		;NO, ERROR
	TLZ F,BINFLG
IFN BLIS11,< POPJ P,	;TEMPORARILY IGNORE BINARY OUTPUT FILE>
	JRST DEVINB


DEVLST:	JRST	DEVIN6		;BINARY DISPATCH
	JRST	DEVIN5		;LISTING OUTPUT
	JRST	DEVIN4		;SOURCE INPUT

SUBTLE	<PROCESSOR FOR ",">
;THE COMMA PROCESSOR
;THIS ROUTINE IS COMPOSED OF TWO PARTS, IN A MANNER SIMILAR TO
;THE DEVICE INITIALIZING ROUTINE; THE COMMA ROUTINE IS CALLED
;WHEN <,> IS SEEN IN THE COMMAND STRING. ROUTINE LOOKUP IS
;CALLED BY COMMA AND BY VARIOUS OTHER PARTS OF THE EXEC TO
;PERFORM LOOKUPS AND ENTERS ON THE DECTAPE.

COMMA:	AOS	BINFIL		; TURN OFF NAME ACCUMULATION
	PUSHJ	P, LOOKUP	; DO A LOOKUP
	JRST	GETCH2		; GO TO NEXT ITEM

SUBTLE	<LOOKUP/ENTER ROUTINE>
;THE LOOKUP ROUTINE CHECKS FOR NULL FILES IN THE COMMAND STRING
;AND DOES LOOKUPS AND ENTERS ON NON-NULL FILES. IF A FILE NAME
;EXTENSION WAS SPECIFIED, IT IS TAKEN. OTHERWISE, A STANDARD
;EXTENSION IS TAKEN. THE DATE IS ENTERED IN OUTPUT FILES. ON
;THE SOURCE DEVICE, THE ROUTINE DOES A LOOKUP, THEN HALTS THE
;SCAN OF THE COMMAND STRING BY RETURNING TO THE CARRIAGE RETURN
;ROUTINE. IF NO FILE NAME EXTENSION IS SPECIFIED FOR THE
;INPUT DEVICE, IT IS TAKEN TO BE <BLI> OR <B11>. IF THE LOOKUP FAILS,
;ANOTHER ATTEMPT IS MADE WITH A BLANK FILE NAME EXTENSION.

LOOKUP:	AOJ	D,		;INCREMENT DEVICE NO.
	CAILE	D, 3		;RESET TO 3 INCASE OF MULT INPUT FILES
	MOVEI	D, 3
	TRNN	F, DEVBIT+EXTBIT+NAMBIT	;ANYTHING TO DO?
	JRST	LOOK3A		;NO, GO AWAY
	PUSH	P, S		;SAVE CURRENT SYMBOL
	MOVE	S, XE+1(T)	;GET DEVICE NAME
	TRON	F, DEVBIT	;DEVICE SPECIFIED?
	HRLZI	S, (SIXBIT /DSK/)	;NO, ASSUME DSK
	PUSHJ	P, DEVINI	;INITIALIZE DEVICE
	POP	P, S		;RESTORE SYMBOL
	TRNE	F, EXTBIT	;EXPLICIT EXTENSION SPECIFIED?
	JRST	LOOK3		;YES
	MOVEM	S, XE+3(T)	;NO, SAVE THE FILE NAME
	HLLZ	S, LIST-1(D)	;GET PROPER EXTENSION NAME
LOOK3:	MOVEM	S, XE+4(T)	;SAVE FILE NAME EXTENSION
	CAIE	D,3		;IS THIS A SOURCE DEVICE?
	SETZM	XE+5(T)		;NO--LET MONITOR SUPPLY DATE & TIME
	SETZM	XE+6(T)		;CLEAR FOURTH WORD OF BLOCK
	SKIPN	A,PPNVAL	; DO WE HAVE A PPN?
	SKIPE	A,PPNPERM	; NOT TEMP PPN.  PERMANET PERHAPS?
	MOVEM	A,XE+6(T)	; YES---USE IT

IFN BLIS11,<
	CAIN	D, 1		;TEMPORARILY IGNORE BIN FILE
	JRST	LOOK3A  >

	HRLI	A, 077000	;ENTER UUO
	CAIN	D, 3		;IS IT AN INPUT DEVICE?
	HRLI	A, 076000	;YES, GET LOOKUP UUO
	DPB	D, CHPTR	;LOAD THE CHANNEL NUMBER
	HRRI	A, XE+3(T)	;GET ADDRESS OF LOOKUP BLOCK
	XCT	A		;EXECUTE THE LOOKUP OR ENTER
	JRST	ERR5		;FAILURE-LOOKUP OR ENTER
	CAIN	D,3		; IS THIS A SOURCE FILE?
	PUSHJ	P,SAVSRC	; YES - SAVE THE LOOKUP BLOCK FOR DELETE
	CAIN	D,1		;IS THIS BINARY FILE?
	PUSHJ	P,SAVBIN	;YES - SAVE LOOKUP BLOCK FOR RENAME
LOOK3A:	CAIE	D, 3		;IS THIS THE SOURCE DEVICE?
	POPJ	P,		;NORMAL EXIT
	POP	P, A		;TERMINATE SCAN
	TRZN	F, CHRBIT	;CALLED BY INCHR ROUTINE?
	JRST	CAR2		;NO, JUMP INTO CR PROCESSOR
	POPJ	P,		;YES, RETURN TO IT

SAVBIN:	PUSH	P,A		;SAVE AC
	HRLI	A,SAVBLK	;SET UP FOR BLT
	MOVSS	A		;AND SWAP
	BLT	A,SAVBLK+3	;MOVE IT
	POP	P,A		;RESTORE
	POPJ	P,		;AND RETURN

SAVSRC:	PUSH	P,A		;SAVE AC
	HRLI	A,SRCBLK	;SET UP FOR BLT
	MOVSS	A		;AND SWAP
	BLT	A,SRCBLK+3	;MOVE IT
	POP	P,A		;RESTORE
	POPJ	P,		;AND RETURN

LIST:	SIXBIT /REL/
IFE BLIS11,< SIXBIT /LST/
	     SIXBIT /BLI/ >
IFN BLIS11,< SIXBIT /P11/
	     SIXBIT /B11/ >
	XWD	0,0
	XWD 0,0

SUBTLE	<LST FILE OUTPUT ROUTINES>
;SUBROUTINE FOR OUTPUT ON THE LISTING FILE
;
;LIST2 DECREMENTS THE COUNT OF THE LISTING DEVICE BUFFER
;AND OUTPUTS A BUFFER WHEN REQUIRED. A CHECK IS MADE FOR THE
;OCCURRENCE OF DATA ERRORS AND DEVICE ERRORS.
;
;CALLS TO LIST2
;	JSP	N, LIST2
;	CHARACTER RIGHT JUSTIFIED IN ACCUMULATOR K




LIST2:	SOSG	XB+10(T)	;DECREMENT ITEM COUNT
	PUSHJ	P, LIST1	;EMPTY ENTIRE BUFFER
	IDPB	K, XB+3*2+1(T)	;STORE THE CHARACTER
	JRST	(N)		;EXIT


LIST1:	OUTPUT	2,		;EMPTY A BUFFER
	STATZ	2, IODATA+IODEV+IOBKTL	;CHECK FOR ERRORS
	JRST	ERR7		;YES, GO COMPLAIN
	POPJ	P,		;NO, EXIT
;ROUTINE TO PRINT THE HEADER

HEDR:	PUSHJ P,ACSAVE		;SAVE THE ACC'S
	HRLI	V, T		;PUT T IN INDEX PORTION OF V
	MOVEI K, 14
	JSP	N, LIST2	;OUTPUT IT
	PUSHJ P, HDRSET
	MOVE	S,SOSPGC	;GET SOS PAGE NO.
	SETZ	C		; COUNT _ 0
	PUSHJ	P,NUMO2		; PRINT IT
	AOSG	PAGCNT(T)	;INCREMENT PAGE COUNT
	JRST	HDR0		;OLLY PRINT IT WHEN IT IS .GT. 0
	MOVEI	S,"-"		; PRINT A HYPHEN
	IDPB	S,B
	MOVE	S, PAGCNT(T)	;GET THE PAGE NUMBER
	PUSHJ	P, NUMO2	;INSERT IT IN THE BUFFER
HDR0:	MOVEI S, 0		;MAKE IT AN ASCIZ MESSAGE
	IDPB	S, B		;BY STORING A NULL CHARACTER
	MOVE	L, TTPNT2	;GET AN INDEXED BYTE POINTER
HDR1:	ILDB	K, L		;GET A CHARACTER
	JUMPE	K, HDR2		;IS IT NULL?
	JSP	N, LIST2	;NO, SO OUTPUT IT
	JRST	HDR1		;CONTINUE

HDR2:	MOVEI	K, 15		;OUTPUT CR AND 2 LF'S
	JSP	N, LIST2
	MOVEI	K, 12
	JSP	N, LIST2
	JSP	N, LIST2
	TRNE	F, TTYLST	;IS LISTING DEVICE A TELETYPE?
	PUSHJ	P, LIST1	;YES, OUTPUT THE WHOLE LINE
	PUSHJ	P, ACREST	;RESTORE ACCUMULATORS
	JRST	(N)		;EXIT TO COMPILER
;THE FIRST PORTION OF THIS ROUTINE PRINTS THE STANDARD
;VERSION NUMBER OF THE CURRENT COMPILER.  THE END OF THE ROUTINE
; PRINTS THE DATE, WHICH IS FOUND IN REGISTER XDATE(T) IN THE FORM
;
;	((Y-1964)*12 + (M-1))*31 + (D-1)


HDRSET:	MOVE	B, TTLPNT	;SET THE BYTE POINTER IN AC B

IFE BLIS11,<MOVEI C,6>		;COUNT _ 6
IFN BLIS11,<SETZ C>		;COUNT _ 0
	LDB	S, MAJVBP	; MAJOR VERSION NUMBER
	PUSHJ	P, OCTOUT
	LDB	S, MINVBP	; MINOR VERSION NUMBER
	JUMPE	S, HDRS1	; DON'T GIVE IT IF ZERO
	ADDI	S, 100		; TO ASCII
	IDPB	S, B

HDRS1:	MOVEI	S, "("
	IDPB	S, B
	HRRZ	S, .JBVER	; GET EDIT NUMBER
	PUSHJ	P, OCTOUT
	MOVEI	S, ")"
	IDPB	S, B
	LDB	S, WHOBP	; LAST EDITOR
	JUMPE	S, HDRS2
	MOVEI	S+1, "-"
	IDPB	S+1, B
	PUSHJ	P, OCTOUT

HDRS2:	MOVEI	S, 40
	IDPB	S, B
	MOVEI	S,11		;PUT IN A TAB
	IDPB	S,B
	MOVE	R, XDATE(T)	;GET THE DATE IN R
	IDIVI	R, 37		;DIVIDE BY 31 DECIMIAL
	PUSH	P, S		;(D-1) IS REMAINDER, SAVE IT
	IDIVI	R, 14		;DIVIDE BY 12 DECIMAL
	PUSHJ	P, DATOUT	;OUTPUT THE MONTH, (M-1) IS IN S
	POP	P, S		;RECOVER (D-1)
	PUSHJ	P, DATOUT	;OUTPUT THE DAY
	MOVE	S, R		;GET (Y-1964)
	ADDI	S, 100		;GET YEAR
	PUSHJ	P, NUMOUT	;TYPE IT
	MOVEI	K, 40		;OUTPUT TWO SPACES AND A TAB
	IDPB	K, B		;...
	IDPB	K, B
	MOVEI	K, 11		; TAB
	IDPB	K, B
;THE FOLLOWING SECTION OF CODE PRINTS THE TIME, WHICH IS
;RETRIEVED FROM THE MONITOR AS THE NUMBER OF MILLISECONDS
;SINCE MIDNIGHT. THE FORMAT OF  THE TIME PRINTOUT IS
;HH:MM.SS



	MSTIME	R,
	IDIVI	R, ^D1000	;TIME IN SECONDS NOW IN R
	IDIVI	R, ^D60		;EXCESS SECONDS IN S
	PUSH	P, S		;SAVE THE SECONDS
	IDIVI	R, ^D60		;MINUTES IN S
	PUSH	P, S		;SAVE THE MINUTES
	MOVE	S, R		;GET HOURS IN S
	PUSHJ	P, NUMOUT	;OUTPUT THE HOURS
	MOVEI	K, ":"		;OUTPUT A COLON AFTER THE HOURS
	IDPB	K, B		;...
	POP	P, S		;RECOVER THE MINUTES
	CAIL	S, ^D10
	JRST	.+3
	MOVEI	K, "0"
	IDPB	K, B		; LEAD ZERO IF NECESSARY
	PUSHJ	P, NUMOUT	;OUTPUT THE MINUTES
	MOVEI	K, ":"
	IDPB	K, B		;...
	POP	P, S		;RECOVER THE SECONDS
	CAIL	S, ^D10
	JRST	.+3
	MOVEI	K, "0"
	IDPB	K, B		;
	PUSHJ	P, NUMOUT	;OUTPUT THE SECONDS
	MOVEI	K, 40
	IDPB	K, B
	MOVEI	K, 11		;OUTPUT A TAB
	IDPB	K, B		;...
;	IF NOT A TTY, THEN PRINT THE FILE NAME



	TRNE	F,TTYLST
	JRST	HDRNF		; IF TTY, THEN NO LIST
	IDPB	K,B		; ANOTHER TAB
	MOVEI	S,6		; COUNT OF CHARS
	HRRI	R,XE+3(T)	; POINT TO FILE NAME
	HRLI	R,440600	; SIXBIT POINTER
	PUSHJ	P,HDRSIX	; PRINT IT
	MOVEI	K,"."		; DOT
	IDPB	K,B		; ...
	MOVEI	S,3		; COUNT
	HRRI	R,XE+4(T)	; POINT TO EXTENSION NAME
	HRLI	R,440600	; SIXBIT POINTER
	PUSHJ	P,HDRSIX	; PRINT IT
	MOVEI	K,11
	IDPB	K,B
	IDPB	K,B		; ANOTHER TAB

HDRNF:

;THE FINAL SECTION OF CODING PICKS UP THE WORD "PAGE " AND
;STORES IT IN THE PROPER PLACE IN THE TITLE BUFFER.

	MOVEI	S, 5		;COUNTER FOR FIVE CHARACTERS
	MOVE	R, PGEPTR	;GET BYTE POINTER TO "PAGE "
	ILDB	K, R		;PICK UP A CHARACTER
	IDPB	K, B		;STORE IT
	SOJG	S, .-2		;LOOP FOR MORE CHARACTERS
	POPJ	P,		;EXIT
;ROUTINES DATOUT AND NUMOUT ASSIST IN OUTPUTTING THE
;NUMERICAL PARTS OF THE HEADER


DATOUT:	AOS	S		;GET MONTH OR DAY
	PUSHJ	P, NUMOUT	;OUTPUT THE NUMBER
	MOVEI	K, "/"		;GET A SLASH FOR DTAE
	IDPB	K, B		;OUTPUT IT
	POPJ	P,		;EXIT

OCTOUT:	SKIPA	C, [OCT 10]

NUMOUT:	MOVEI	C,^D10
NUMO2:	IDIVI	S, (C)		;RECURSIVE SUBROUTINE
	HRLM	S+1, (P)	;SAVE REMAINDER ON PUSHDOWN LIST
	JUMPE	S, .+2		;IS NUMBER FINISHED?
	PUSHJ	P, NUMO2	;NO - LOOP AGAIN
	HLRZ	K, (P)		;RETRIEVE NUMBER FROM PD LIST
	ADDI	K, 60		;MAKE IT ASCII
	IDPB	K, B		;OUTPUT IT
	POPJ	P,		;GET NEXT NUMBER OR EXIT

HDRSIX:	ILDB	K,R		; GET A SIXBIT CHAR
	JUMPE	K,HDR3		; DO NOT PRINT NULLS
	ADDI	K,40		; MAKE 7-BIT
	IDPB	K,B		; WRITE INTO BUFFER
HDR3:	SOJG	S,HDRSIX	; LNOP
	POPJ	P,		; RETURN


SUBTLE	<TELETYPE OUTPUT ROUTINES>
;BASIC TELETYPE OUTPUT ROUTINES
;%MERGE%  THESE ROUTINES HAVE BEEN DELETED IN FAVOR OF THE TTCALL
;  UUO.  ALL ROUTINES FOR BUFFERED TTY I/O HAVE BEEN DELETED.

CMDCHR:	TRNN	F, CCLBIT!CMDLIN	; CCL FILE OR HAVE CMD LINE?
	JRST	CMDC1
CMDC0:	ILDB	A, XB+15(T)	; YES - GET CHARACTER
	CAIL	A, "A"+40	; UPPER CASE?
	CAILE	A, "Z"+40
	POPJ	P,
	SUBI	A, 40		; YES - CONVERT TO UPPER
	POPJ	P,

CMDC1:	MOVE	A, PCMDBF	; POINTER TO BUFFER
	MOVEM	A, XB+15(T)
	MOVNI	R, ^D128*5-1	; LENGTH OF BUFFER (IN CHARS)

CMDC2:	INCHWL	C		; NEXT CHAR
	CAIL	C, 12
	CAILE	C, 14		; BREAK?
	CAIN	C, 33		; (ESC)
	JRST	CMDC3
	AOJGE	R, ERR12
	IDPB	C, A
	JRST	CMDC2		; AGAIN

CMDC3:	IDPB	C, A		; PUT BREAK
	TRO	F, CMDLIN	; GOT IT
	JRST	CMDC0		; GIVE FIRST




SUBTLE <READ SOURCE FILES>
;ROUTINE TO INPUT CHARACTERS FROM THE SOURCE DEVICE
;THIS ROUTINE ASSUMES THAT THE COMMAND SCANNER PORTION OF
;THE EXEC HALTS AFTER IT HAS FOUND THE FIRST INPUT FILE.
;ROUTINE CHAR INPUTS CHARACTERS ON CHANNEL 3 UNTIL AN END OF
;FILE CONDITION IS MET. IT THEN CHECKS A FLAG TO SEE IF ANY 
;MORE INPUT FILES NEED TO BE INITIALIZED. IF SO, IT RELEASES
;THE OLD INPUT FILE AND INITIALIZES A NEW ONE, AND CONTINUES 
;TO DO INPUT ON THIS FILE.
;WHEN THE LAST END OF FILE IS REACHED, THE EXEC PLACES AN
;32 CHARACTER AND A CARRIAGE RETURN IN THE BUFFER

CHARA:	MOVEM	J,SEQNUM(T)
IFN CMUSW,<
	CAMN	J,SOSPG		; SKIP IF NOT AN SOS PAGE BREAK
	TRO	F, FUNNY	;INDICATE DOING SOS PAGE MARK  >
	MOVNI	J,5
	ADDM	J,2(BU)
	AOS	1(BU)
INCHR:	SOSG	2(BU)
	PUSHJ	P,CHAR1
	IBP	1(BU)
	MOVE	J, @1(BU)
	TRZE	J,1
	JRST CHARA
IFN CMUSW,<
	TRZE	F, FUNNY	;ARE WE DOING SOS PAGE MARK?
	JRST	INCHR		;YES, SKIP OVER THE 2ND CR  >
	LDB	J,1(BU)
	CAIN	J,12		;LINE FEED?
	JRST	INCHR		;YES - IGNORE
	JUMPE	J, INCHR
	JRST	(N)		;NO, RETURN

CHAR1:	XCT	INLST-3(CH)	;CALL MONITIOR FOR A BUFFER
	POPJ	P,		;EXIT
	HRLZ	W,CH		;SET UP
	LSH	W,5		; CHANNEL NUMBER
	IOR	W,[STATO 0,IOEOF]; FOR STATO
	XCT	W
	JRST ERR8		;INPUT TRANSMISSION ERROR
	CAIL	CH, REQFST-1	;ARE WE IN A REQUIRE?
	JRST	REQEOF		;YES-SPECIAL EOF PROCESSING
	PUSHJ	P, ACSAVE	;YES, SAVE ACS
	HRLI	V, T		;PUT T IN INDEX PORTION OF V
	CLOSE	3,		; CLOSE THE SOURCE FILE
	SETCM	W, B20FLG##	; SHOULD WE DELETE SOURCE FILE
	TRNN	W, 3
	PUSHJ	P, SRCDEL	; YES - CALL SRCDEL TO DO IT
	TRNE	F, ENDBIT	;END OF ALL INPUT FILES?
	JRST	CHAR2		;YES
	MOVE	A, XB-1(T)	;PREPARE FOR NEW DEVICE...
	EXCH	A, XA+F(T)	;...BY RESETTING UPDATED .JBFF
	MOVEI	D, 3		;SET CHANNEL NUMBER AC
	MOVE	A, BLANKS	;STORE BLANKS IN THE SEQ. NO.
	MOVEM	A, SEQNUM(T)	;...
	TRO	F, CHRBIT	;SET CHRBIT
	MOVEM	0,SAVE0		; IN CASE WE HAVE TO PUNT
	PUSHJ	P, GETCH2	;GET SOME MORE OF THE COMMAND
	PUSHJ	P, ACREST	;RESTORE THE ACCUMULATORS
	POPJ	P,		; AND RETURN

CHAR2:	MOVEI	A, 3		;SET UP ARTIFICIAL COUNT
	MOVEM	A, XB+3*3+2(T)	;IN BUFFER HEADER
	HRR	A, XB-1(T)	;SET UP A BYTE POINTER
	HRLI	A, 440700	;...
	MOVEM	A, XB+3*3+1(T)	;SAVE IT IN THE BUFFER HEADER
	MOVEI	B, 32		;EOF CHARACTER (32)
	IDPB	B, A		;...
	MOVEI	B, 15		;CARRIAGE RETURN
	IDPB	B, A		;...
IFE BLIS11,< TLO	F, FINFLG	;GIVE FINAL EOF TO BLISS>
IFN BLIS11,< TRO	F, FINFLG	;GIVE FINAL EOF TO BLISS>
	PUSHJ	P, ACREST	;RESTORE ACS
	POPJ	P,		; DONE

SRCDEL:	SETZM	SRCBLK+2	; NO TIME OR PROTECTION
	ENTER	3,SRCBLK	; ENTER SOURCE FILE AGAIN
	POPJ	P,		; IF FAILURE RETURN
	SETZM	SRCBLK		; NAME=NULL
	RENAME	3,SRCBLK	; DELETE
	CLOSE	3,		; IF FAIL RECLOSE THE FILE
	POPJ	P,

REQEOF:	HRLZI	W, (RELEAS)
	DPB	CH, [POINT 4, W, 12]	; PUT CHANNEL NUMBER
	XCT	W
	SOS	REQCHN		;REQREL EXPECTS THIS
	PUSHJ	0,SVBLIS
	PUSHJ	0,REQREL	;CALL COMPILER TO CLEAN UP
	PUSHJ	0,SVBLIS
	MOVE	J,BLANKS
	MOVEM	J,SEQNUM(T)
	MOVEI	J,15		;RETURN A CR
	MOVEI	$V, 0		;AND SUCCESS.
	HRRM N,0(P)		; 5.200.35 REPLACES JRST (N)
	POPJ P,			; 5.200.35 SOLVING THE 22 REQUIRE FILES
				;PROBLEM.  PAB/25-FEB-76

; INLST IS THE LIST OF IN UUO'S REFERENCED AT CHAR1
INLST:	IN 3,
	IN 4,
	IN 5,
	IN 6,
	IN 7,
	IN 10,
	IN 11,
	IN 12,
	IN 13,
	IN 14,
	IN 15,
	IN 16,
	IN 17,
;ROUTINES TO SAVE AND RESTORE THE COMPILER ACCUMULATORS
ACSAVE: EXCH	A,0(P)		; A GETS RETURN ADDRESS
	PUSH	P,B	;
	PUSH	P,C
	PUSH	P,D
	PUSH	P,E
	PUSH	P,G
	PUSH	P,H
	PUSH	P,R
	PUSH	P,S
	PUSH	P,V
	PUSH	P,S+1
	JRST	@A	; SNEAKY
ACREST: POP	P,A	; A_RETURN ADDRESS
	POP	P,S+1
	POP	P,V
	POP	P,S
	POP	P,R
	POP	P,H
	POP	P,G
	POP	P,E
	POP	P,D
	POP	P,C
	POP	P,B
	EXCH	A,0(P)	; TOP_RETURN; A_PREVIOUS TOP
	POPJ	P,	; SNEAKY (SEE COMMENT ABOVE)


OUTBN2:
IFN BLIS11,< POPJ P,	;IGNORE OUTPUT TO BIN FILE; AT LEAST FOR NOW>
	OUTPUT 1,		;OUTPUT ON CHANNEL 1
	STATZ 1, IODATA+IOBKTL+IODEV	;CHECK FOR ERRORS
	JRST ERR10		;TRANSMISSION ERROR
	POPJ P,			;RETURN


SUBTLE <ERROR ROUTINES>
;ERROR ROUTINES

;BAD CHARACTER OR NUMBER IN SWITCH MODE

ERR1:	OUTSTR	QUESER		; PUT QUESTION MARK
	MOVEI	G,55		;PUT - CHARACTER INTO SCRACTH REG  2/16/78
	TRZE	F,UNBIT		;CLEAR COMPLEMENT BIT  2/16/78
	OUTCHR	G		;  2/16/78
	OUTCHR	K
	OUTSTR	ERR1M		;TYPE A MESSAGE
	JRST	ERROR		;DONE


;BAD CHARACTER IN COMMAND STRING, NORMAL MODE

ERR2:	OUTSTR	QUESER
	OUTCHR	K		;TYPE THE BAD CHARACTER
	OUTSTR	ERR2M		;MESSAGE
	JRST	ERROR

;XXX IS NOT AVAILABLE

ERR3:	OUTSTR	QUESER
	PUSHJ	P, STYPO	;TYPE THE DEVICE NAME
	OUTSTR	ERR3M		;GET A MESSAGE
ERR3A:	CAIN	D, 3		;SOURCE DEVICE?
	POP	P, A		;YES, CLEAR JUNK OFF PD LIST
	JRST	ERROR


; BLISS COMMAND ERROR
ERR4:	OUTSTR	ERR4M		;TYPE A MESSAGE
	JRST	ERROR


;LOOKUP FAILURE

ERR5:	CAIE	D, 3		;LOOKUP ERROR?
	JRST	ERR5B		;NO, ENTER ERROR
	TRNE	F, EXTBIT	; EXPLICIT EXTENSION?
	JRST	ERR5B
	HLRZ	A, XE+4(T)	;GET FILE NAME EXTENSION
	JUMPE	A, ERR5B	;IS IT BLANK?
	MOVEI	S, 0		;NO, TRY ANOTHER LOOKUP
	CAIN	A, (SIXBIT /BLI/)	; FIRST DEFAULT?
	MOVSI	S, (SIXBIT /B10/)	; YES - TRY NEXT
	JRST	LOOK3		;ENTER LOOKUP ROUTINE AGAIN


;ENTER FAILURE OR 2ND LOOKUP FAILURE

ERR5B:	LDB	S,[POINT 2,XE+4(T),35]
	HRRZ	L, ERR5TB(S)	;LOAD LOOKUP ERROR MSG POINTER
	CAIE	D, 3		;WAS IT REALLY A LOOKUP ERROR?
	HLRZ	L, ERR5TB(S)	;NO, SO LOAD ENTER ERROR MSG POINTER
	OUTSTR	(L)		; TYPE IT
	MOVE	S, XE+3(T)	;GET THE FILE NAME
	PUSHJ	P, STYPO	;TYPE IT
	MOVEI	A,"."
	OUTCHR	A
	HLLZ	S,XE+4(T)	; GET THE EXTENSION
	PUSHJ	P,STYPO		; TYPE IT TOO
	SKIPE	A,PPNVAL	; TEMPORARY PPN?
	JRST	PPPN		; YES---OUTPUT IT
	SKIPN	A,PPNPERM	; PERMANENT PPN?
	JRST	NOPPPN		; NO---NONE AT ALL
PPPN:	PUSH	P,A		; SAVE PPN
	MOVEI	A,"["
	OUTCHR	A
	POP	P,A		; RESTOR A
	HRRI	S,PPNBUFF	; POINT TO BUFFER
	IFN	CMUSW,<
	HRLI	S,A		; AND A
	CALL	S,[SIXBIT /DECCMU/]	; AND CONVERT IT
	JRST	PPNX		; SOMETHING HAPPENED>
	IFE	CMUSW,<
	HRLI	S,440700
	PUSH	P,S+1		; SAVE S+1
	PUSH	P,S+2
PPNA4:	MOVEI	S+2,6
PPNA3:	LDB	S+1,[POINT 3,A,2]
	JUMPN	S+1,PPNA1	; IF NOT 0, GO PRINT IT
PPNA2:	LSH	A,3		; SHIFT OVER PPN
	SOJG	S+2,PPNA3	; GET NEXT
	JUMPE	A,PPNA6		; ARE WE DONE?
	MOVEI	S+1,","		; PRINT ,
	IDPB	S+1,S
	JRST	PPNA4		; GET PROGRAMMER NO.
PPNA1:	ADDI	S+1,"0"		; CONVERT TO ASCII
	IDPB	S+1,S		; PLUNK IT DOWN
	JRST	PPNA2		; AND GET NEXT DIGIT
PPNA6:	SETZ	S+1,
	IDPB	S+1,S		; AMKE IT ASCIZ STRING
	POP	P,S+2
	POP	P,S+1 >
	OUTSTR	PPNBUFF		; PRINT PPN
	MOVEI	A, "]"
	OUTCHR	A


NOPPPN:	OUTSTR	ERR5MA		;"ON DEVICE "
	MOVE	S, XE+1(T)	;GET DEVICE NAME
	PUSHJ	P, STYPO	;TYPE IT
	OUTSTR	[BYTE(7)15,12]
	JRST	ERROR		;EXIT



;OUTPUT ERROR ON LISTING DEVICE

ERR7:	MOVEI	D, 2		;LISTING IS DEVICE NUMBER 2
	JRST	ERR10A		;ENTER COMMON ROUTINE

;INPUT ERROR ON SOURCE DEVICE
ERR8:	MOVEI	D, 3		;SOURCE IS DEVICE NUMBER 3
	JRST	ERR10A		;ENTER COMMON ROUTINE


;OUTPUT ERROR ON BINARY DEVICE
ERR10:	MOVEI	D, 1		;BINARY IS DEVICE NUMBER 1
ERR10A:	OUTSTR	ERR10C		;"TRANSMISSION ERROR ON "
	OUTSTR	@ERR10M-1(D)	;GET DEVICE TYPE
	TRO	F,CHRBIT	; TRICK IT INTO PUNTING
	MOVEM	0,SAVE0		; PUNT GLITCH NEEDS THIS TOO
	JRST	ERROR

;XXX IS NOT A DEVICE

ERR11:	OUTSTR	QUESER
	MOVE	S, XE+1(T)	;GET DEVICE NAME
	PUSHJ	P, STYPO	;TYPE IT
	OUTSTR	ERR11M		;"IS NOT A DEVICE"
	JRST	ERROR

;INPUT LINE TOO LONG

ERR12:	OUTSTR	ERR12M		;SEND THE MESSAGE
	JRST	ERROR

;XXX CANNOT DO IO AS REQUESTED

ERR15:	OUTSTR	QUESER
	PUSHJ	P, STYPO	;TYPE DEVICE NAME
	OUTSTR	ERR15M		;GIVE A MESSAGE
	JRST	ERR3A		;ENTER "NOT AVAILABLE" ROUTINE

;XXX CANNOT BE USED AS AN XXX DEVICE

ERR17:	OUTSTR	QUESER
	PUSHJ	P, STYPO	;TYPE DEVICE NAME
	OUTSTR	ERR17M		;GIVE A MESSAGE
	OUTSTR	@ERR10M-1(D)	;GIVE DEVICE TYPE
	JRST	ERROR

ERR18:	OUTSTR	ERR18M		;
	JRST	ERROR

PPNERR:	OUTSTR	ERRPPN		; PPN ERR
	MOVEI	A, "["
	OUTCHR	A
	OUTSTR	PPNBUF
	MOVEI	A, "]"
	OUTCHR	A
	OUTSTR	[BYTE(7)15,12]
	JRST	ERROR



ERRPPN: ASCIZ	"? ILLEGAL PPN: "



IFN BLIS11,<

	INTERNAL	BLEXIT

BLEXIT:	CLOSE	1,
	CLOSE	2,
	CLOSE	4,
	CLOSE	5,
	EXIT  >
;AUXILIARY ERROR SUBROUTINES

ERROR:	TRNE	F,CCLBIT	; ARE WE IN CCL MODE?
	PUSHJ	P,CCLPRT	; GIVE USER  A CLUE
	TRZE F,CHRBIT		; DID WE COME FROM CHR ROUTINE?
	JRST PUNTIT		; YES...PUNT
	SETZM	CCLCTL		; CLEAR CCL SWITCHES
	JRST F4EXEC

PUNTIT:	MOVE	0,SAVE0		; GET BLISS STACK REG
	SETZM	CCLCTL
	PUSHJ	0,SVBLIS	; BACK TO BLISS WORLD
	PUSH	0,[500]		; PUNT (#500);
	PUSHJ	0,PUNT



;	OUTPUT UP TO ERROR THE CCL STRING


CCLPRT:	MOVE	B,CCLBP		; GET CURRENT BYTE POINTER
	HRRZI	A,CCLBUF	; BUFFER
	HRLI	A,440700	; POINTER
	MOVEM	A,CCLBP		; RESET TO BEGINNING
PLOP:	ILDB	A,CCLBP		; GET A CHAR
	JUMPE	A,PLEND		; QUIT IF NULL
	OUTCHR	A
	CAME	B,CCLBP		; AT ERROR YET?
	JRST	PLOP		; NO---KEEP PRINTING
PLEND:	OUTSTR	[BYTE(7)15,12]
	POPJ	P,

;ROUTINE STYPO TYPES THE SIXBIT NAME IN AC S.

STYPO:	MOVEI	B, 6		;SIX CHARACTERS
	MOVE	C, SYMPTR	;POINTER TO AC A
STYPO2:	ILDB	A, C		;GET A CHARACTER
	JUMPE	A, STYPO3	;DONT TYPE A NULL
	ADDI	A, 40		;CONVERT TO SEVEN BIT ASCII
	OUTCHR	A
STYPO3:	SOJG	B, STYPO2	;MORE TO TYPE?
	POPJ	P,		;NO, EXIT

SUBTLE <ERROR MESSAGES>
;ERROR MESSAGE ADDRESSES
ERR10M:	XWD	0, ERR10D
	XWD	0, ERR10E
	XWD	0, ERR10F

ERR5TB:	XWD	ERR6M,ERR5M
	XWD	ERR16M,ERR16M
	XWD	ERR14M,ERR14M
	XWD	ERR13M,ERR13M

;ERROR MESSAGES

QUESER:	ASCIZ	"? "

ERR1M:	ASCIZ	" is an illegal switch
"
ERR2M:	ASCIZ	" is an illegal character
"
ERR3M:	ASCIZ	" is not available
"
ERR4M:	ASCIZ  "? Command error
"
ERR5M:	ASCIZ	"? Cannot find file "
ERR5MA:	ASCIZ	" on device "
ERR6M:	ASCIZ	"? Invalid file name:  "
ERR10C:	ASCIZ	"? Transmission error on "
ERR10D:	ASCIZ	"binary device
"
ERR10E:	ASCIZ	"listing device
"
ERR10F:	ASCIZ	"source device
"
ERR11M:	ASCIZ	" is not a device
"
ERR12M:	ASCIZ	"? Input line too long
"
ERR13M:	ASCIZ	"? File being modified:  "
ERR14M:	ASCIZ	"? Directory full or file write-protected:  "
ERR15M:	ASCIZ	" cannot do IO as requested
"
ERR16M:	ASCIZ	"? Non-existant UFD:  "
ERR17M:	ASCIZ	" cannot be used as "
ERR18M:	ASCIZ	"? Double period in filename"
IFN BLIS11,<
IFN CMUSW,<
EXPMES:	ASCIZ	"EXPERIMENTAL BLIS11. MAIL ERRORS TO N110JZ07.
">
IFE CMUSW,<
EXPMES:	ASCIZ	"EXPERIMENTAL BLIS11. REPORT ALL ERRORS TO BLIS11 GROUP
">>

SUBTLE <BLISS INTERFACE ROUTINES>
; BLISS INTERFACE ROUTINES
;---------------------------


DEFINE RENTRY <
	IFE TIMSW,<>
	IFN TIMSW,<
	HRRZI 12,0
	PUSH  12
	PUSHJ TIMER
	SUB	0,[XWD 1,1]
>>
DEFINE REXIT <
	IFE TIMSW,<>
	IFN TIMSW,<
	HRROI	12,0
	PUSH	12
	PUSHJ	TIMER
	SUB	0,[XWD 1,1]
>>


SVBLIS:	EXCH B,BXA+B
	EXCH F,BXA+F
	EXCH T,BXA+T
	EXCH P,BXA+P
	EXCH J,BXA+J
	EXCH K,BXA+K
	EXCH L,BXA+L
	EXCH N,BXA+N
	POPJ 0,0

FORCE:	RENTRY
	PUSHJ 0,SVBLIS
	MOVE  K,0
	MOVE  K,-1(K)
	XCT   DSLIST(K)
	PUSHJ 0,SVBLIS
	REXIT
	POPJ  0,0

DSLIST:	JFCL
	PUSHJ P,OUTBN2
	PUSHJ P,LIST1
	JFCL
	JFCL


INITIO:	RENTRY
	PUSHJ 0,SVBLIS
	EXCH  0,BXA
	JSP   N,RENBIO	;NEW NAME FOR REENTRANT CODE
	MOVEI N,XB(T)
	MOVEM N,DEVBPT
	EXCH  0,BXA
	PUSHJ 0,SVBLIS
	REXIT
	POPJ  0,0

FINIO:	RENTRY
	SKIPE 0,ERRORFOUND	; DON'T CLOSE REL CHANNEL IF THERE WERE ERRORS
	JRST FINIOA
	CLOSE 1,0
	SKIPE SAVBLK		; DON'T RENAME IF NO BINARY FILE
	PUSHJ 0,RENAM

FINIOA:	CLOSE 2,0
	RESET
	TLO	F, BINFLG!LSTFLG!CANLST	; %2.19% DEVICES HAVE BEEN RELEASED
	REXIT
	POPJ  0,0

; DELETE THE FOLLOWING SIX LINES. THE DEC10 AND DEC20 COMPATABILITY
; PROBLEM. ON DEC10, RENAME FILLS UP CREATION DATE/TIME.
; ON DEC10, RENAME FILLS UP DATE/TIME EVEN COMPILER FILLS IT.
; ON DEC20, RENAME FILLS UP CREATION DATE/TIME. ON DEC20,
; IF COMPILER FILLS UP , THEN RENAME FILLS UP WITH WRONG DATE/TIME.
; RENAME ON DEC20 GETS CONFUSED.	JAN-18-78
; RENAM:	TIMER	4,		; TIME
;	IDIVI 4,7020		; IN MINUTES
;	DATE	5,
;	LSH 4,14
;	IOR 4,5
;	DPB 4,[POINT 23,SAVBLK+2,35]
RENAM:	HLLZ	4,SAVBLK+1		; GET THE FILE EXTENSION
	MOVEM	4,SAVBLK+1		; ZERO OUT THE RIGHT HALF
	SETZM	SAVBLK+2		; ZERO OUT DATE/TIME
	MOVE 4,SAVBLK+3
	MOVEM 4,SAVBLK-1
	MOVEI 4,4
	MOVEM 4,SAVBLK-2	; EXTENDED RENAME
	RENAME 1,SAVBLK-2
	JFCL
	POPJ 0,
IFE BLIS11,<
PAGER:	RENTRY
	PUSHJ 0,SVBLIS
	SETZM	RPAGE		; CLEAR RPAGE FLAG
	AOS	SOSPGC		; INCREMENT PAGE COUNT
	SETOM	PAGCNT(T)	; RESET SUPPLEMENTAL PAGE COUNT
	JRST  PAGE1		; SNEAKY EXIT THROUGH 'PAGE'
>


PAGE:	RENTRY
	PUSHJ 0,SVBLIS
PAGE1:	TLNN	F,LSTFLG
	JSP   N,HEDR
	PUSHJ 0,SVBLIS
	REXIT
	POPJ  0,0

TTYLIS:	RENTRY
	PUSHJ 0,SVBLIS
	MOVE  K,0
	MOVE K,-1(K)
	OUTCHR	K
	PUSHJ 0,SVBLIS
	REXIT
	POPJ  0,0
READTEXT: RENTRY
	PUSHJ 0,SVBLIS
	MOVEI	$V, 0		; BE READY TO SUCCEED
	MOVE  N, [POINT 7,BUFF]
	MOVEM N,PBUFF
	SETZM	DLCNT##
	MOVEI	N, BUFFL
	MOVEM	N, RDCNT
	MOVEI	J, " "
	JSP	N, PACK
IFE BLIS11,< TLNE	F, FINFLG >
IFN BLIS11,< TRNE	F, FINFLG >
	JRST  RTEXIT
	MOVE	CH,REQCHN
	CAIL	CH, REQFST	;LOWEST REQUIRE CHAN
	JRST	[HLRZ BU,REQDATA(CH)
		 JRST RTEXT1]
	MOVEI	CH,3
	MOVEI	BU,XB+11(T)

RTEXT1:	JSP   N,INCHR
	JSP	N,RTEXT3
RTEXT2:	SOSG	2(BU)
	PUSHJ	P,CHAR1		;GET A NEW BUFFER
	ILDB	J,1(BU)
RTEXT3:	CAIGE	J," "
	JRST	LOCHAR		;CONTROL CHARACTER
	CAIN	J,177		; RUBOUT?
	JRST	DLCHAR
PACK:	SOSGE	RDCNT
	JRST	RTEXT5		;LINE TOO LONG
	IDPB	J,PBUFF
	JRST	(N)		;LOOP

DLCHAR:	AOS	DLCNT##		; INCRIMENT DELETE CHARACTER COUNT
	JRST	RTEXT2		; OTHERWISE IGNORE IT.

LOCHAR:	CAIN	J,11		;TAB
	JRST	PACK
	CAIN	J,15		;CR
	JRST	RTEXT4
	CAIE	J,14		; FF?
	JRST	RTEXT2		; NO - IGNORE
	TLNE	F, LSTFLG	; LISTING?
	JRST	RTEXT1		; NOT LISTING - DON'T MODIFY PAGE FLAGS
IFN BLIS11,<AOS	SOSPGC		;YES, INCREMENT PAGE COUNT
	SETOM	PAGCNT(T)	;RESET ACTUAL PAGE PER LOGICAL PAGE COUNT
	SETOM	DOPAGE >	;INDICATE FORM FEED WAS SEEN
IFE BLIS11,<SETOM RPAGE		; SPECIAL FF FLAG FOR BLIS10
	JRST	RTEXT1		; AND PASS IT BY>


RTEXT4:
IFE BLIS11,< JSP	N, PACK>

RTEXIT:	MOVEI J,177
	JSP	N, PACK
IFN BLIS11, <
	MOVEI	J, 15
	JSP	N, PACK  >
RTEX1:	MOVE  N, [POINT 7,BUFF]
	MOVEM N,PBUFF
	PUSHJ 0,SVBLIS
	REXIT
	POPJ  0,0


RTEXT5:	JSP	N, INCHR
	CAIE	J, 15		; FIND NEXT <RET>
	JRST	RTEXT5
	MOVEI	$V, 1		; ERROR ON LINE
	MOVEI	J, 177
	DPB	J, PBUFF	; STASH #177
	JRST	RTEX1

SUBTLE <CONSTANT DATA AREA>
PGEMES:	ASCII	"Page "


IFE BLIS11,<
NAME1:	ASCII	/;BLIS/
NAME2:	ASCII	/S-10 /  >

IFN BLIS11,<
NAME1:	ASCII /; BLI/
NAME2:	ASCII /S11 V/  >

BLANKS:	BYTE(7)40,40,40,40,40
CHPTR:	POINT	4, A, 12
SYMPTR:	POINT	6, S
PCMDBF:	POINT	7, CCLBUF		; POINTER TO BUFFER AREA FOR TTY CMD STRING
					;  AND CCL STR TOO
TTPNT2:	POINT	7, TTLBUF(T)
TTLPNT:	POINT	7, TTLBUF+2(T)
PGEPTR:	POINT	7, PGEMES
MAJVBP:: POINT	9, .JBVER, 11		; MAJOR VERSION NUMBER
MINVBP:: POINT	6, .JBVER, 17		; MINOR VERSION NUMBER
WHOBP:	POINT	3, .JBVER, 2		; LAST EDITOR
IFE BLIS11,<
BUFFL==^D29*5>		;LENGTH OF SOURCE LINE BUFFER




IFE	NONREN, <XLIST	; LITERALS IN HISEG
		LIT
		LIST>



SUBTLE <IMPURE SEGMENT>
IFE NONREN,<RELOC>		;LOW SEG

BIO:	BLOCK	1		;ZERO IF INITIO HAS NEVER BEEN CALLED
;	CONTROL WORDS FOR CCL CAPABILITIES
CCLCTL:	BLOCK	1		; CCL SWITCHES
				; 1=> CCL ENTRY, 3=> CCL FILE READ
				; 0 => NO CCL ENTRY
CCLBP:	BLOCK	1		; BYTE POINTER FOR CCL FILE
CCLBUF:	BLOCK	^D128		; BUFFER FOR CCL COMMANDS
SAVE0:	BLOCK	1
RDCNT:	BLOCK	1
SOSPGC:: BLOCK	1
SAVP:	BLOCK	1		; PLACE TO SAVE PACCUM
BINFIL:	BLOCK	1		; ACCUMULATE MODULE NAME SWITCH

PPNBUF:	BLOCK	3		; WHERE WE HOLD PPN'S
PPNVAL:	BLOCK	1		; WHAT OUR PPN IS
PPNPER:	BLOCK	1		; A PERMANENT PPN
TTOBUF:	BLOCK	1
IFN DETSW,<
SAVEK:	BLOCK	1		;SAVE REG FOR DETACH CHECK>

QSAVBLK: BLOCK	6		;SAVE ENTER BLOCK FOR RENAME OF BINARY FILE
SAVBLK=QSAVBLK+2
QSRCBLK:	BLOCK	6	;SAVE LOOKUP BLOCK FOR DELETION OF SOURCE FILE
SRCBLK=QSRCBLK+2

IFE BLIS11,<RPAGE: BLOCK 1>	;FOR ROUTINE PAGE FLAG




	END