Trailing-Edge
-
PDP-10 Archives
-
bb-r775d-bm_tops20_ks_upd_4
-
sources/lwrite.bli
There are 10 other files named lwrite.bli in the archive. Click here to see a list.
%TITLE 'LWRITE - write to a file'
MODULE LWRITE ( ! Write to a file
IDENT = '3-009' ! File: LWRITE.BLI Edit: CJG3009
) =
BEGIN
!
! COPYRIGHT (c) 1981, 1985 BY
! DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
! ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
! ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
! INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
! COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
! OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
! TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
! AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
! CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
! SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
!
!++
! FACILITY: EDT -- The DEC Standard Editor
!
! ABSTRACT:
!
! This module executes the line mode EXIT and WRITE commands.
!
! ENVIRONMENT: Runs at any access mode - AST reentrant
!
! AUTHOR: Bob Kushlis, CREATION DATE: February 3, 1978
!
! MODIFIED BY:
!
! 1-001 - Original. DJS 30-JAN-1981. This module was created by
! extracting the routines WRITE_FILE, EDT$$EXI_CMD , and EDT$$WR_CMD
! from the module EXEC.BLI.
! 1-002 - Regularize headers. JBS 23-Mar-1981
! 1-003 - Change WRITE_COM to EDT$$WR_CMD . JBS 30-Mar-1981
! 1-004 - Use the new message codes. JBS 04-Aug-1981
! 1-005 - Don't write out summary when flag clear. STS 05-Oct-1981
! 1-006 - Convert open output file to use EDT$FILEIO. STS 13-Jan-1982
! 1-007 - Remove division from line number calculatons. SMB 15-Jan-1982
! 1-008 - Convert reads and writes to use EDT$FILEIO. STS 15-Jan-1982
! 1-009 - Add capability for 15 digit line numbers. SMB 19-Jan-1982
! 1-010 - pass sequence numbers by descriptors. STS 20-Jan-1981
! 1-011 - Change the checking of sequence/nosequence. STS 21-Jan-1982
! 1-012 - Fix size bugs related to 15 digit sequences & increments. SMB 26-Jan-1982
! 1-013 - Remove original line numbers. SMB 28-Jan-1982
! 1-014 - Fix bug in writing with /SEQ. SMB 30-Jan-1982
! 1-015 - Add range checking on seq.# and incr. SMB 5-Feb-1982
! 1-016 - Take out call to edt$$get_fnam. STS 10-Feb-1982
! 1-017 - Change line number division to a routine call. SMB 11-Feb-1982
! 1-018 - Format filename for output. STS 12-Feb-1982
! 1-019 - Pass filename to edt$$fiopn_err. STS 26-Feb-1982
! 1-020 - Add literals for callable EDT. STS 08-Mar-1982
! 1-021 - Use the input file name as the output name, if permitted and
! there is no output file name. JBS 25-Mar-1982
! 1-022 - The file I/O routines return a status. JBS 26-Mar-1982
! 1-023 - Correct a typo in edit 1-022. JBS 27-Mar-1982
! 1-024 - Minor edits, plus remove code that doesn't seem to be executed. SMB 30-Mar-1982
! 1-025 - Rearrange where file name is stored so we get "real" name instead
! of "temp" filename. SMB 31-Mar-1982
! 1-026 - Add code for CONTROL_C check during record writing. SMB 08-Apr-1982
! 1-027 - Print messages on CLOSE errors. JBS 12-Apr-1982
! 1-028 - Convert PDP-11 command file names to uppercase. SMB 13-Apr-1982
! 1-029 - Clear PREV_RANGE when creating a range block for EXIT. JBS 15-Apr-1982
! 1-030 - Don't set up any message for nosummary. STS 16-Apr-1982
! 1-031 - Change NO FILE error message and processing for WRITE. SMB 21-Apr-1982
! 1-032 - Save original buffer address. STS 10-May-1982
! 1-033 - Make minor modifications based on code review input. SMB 24-May-1982
! 1-034 - Set a flag if control C actually aborts something. JBS 24-May-1982
! 1-035 - Fix bug with explicit file names. SMB 25-May-1982
! 1-036 - Pass default file name using RHB parameter. JBS 15-Jun-1982
! 1-037 - Stop working message before printing messages to screen. SMB 22-Jun-1982
! 1-038 - Stop processing if bad select range. SMB 01-Jul-1982
! 1-039 - Use EDT$$FMT_CRLF instead of EDT$$OUT_FMTBUF. JBS 05-Jul-1982
! 1-040 - Change write file messages. SMB 13-Jul-1982
! 1-041 - Give message for write errors. STS 21-Jul-1982
! 1-042 - Don't put out error messages on 11's STS 22-Jul-1982
! 1-043 - Restore screen width before displaying file name on EXIT. SMB 29-Jul-1982
! 1-044 - Check the abort write flag after reads. STS 05-Aug-1982
! 1-045 - Make use of the bit masks for the options word. STS 17-Aug-1982
! 1-046 - Fix up the references to the EDT$M_ symbols. JBS 23-Aug-1982
! 1-047 - Put EDT$$TST_EOB in line. STS 22-Sep-1982
! 1-048 - Change to use new addline/subline macro. STS 1-Oct-1982
! 1-049 - Put code for edt$$rng_posfrst in line. STS 11-Oct-1982
! 1-050 - Modify to use new compare macro. STS 10-Oct-1982
! 1-051 - Avoid str$copy where possible to increase efficiency. STS 10-Nov-1982
! 1-052 - Add conditional for WPS support. JBS 10-Feb-1983
! 1-053 - Only set screen width if it has changed from original. SMB 17-Feb-1983
! 3-001 - Start of modifications for Tops10/20. GB December 1982
! 3-002 - Add conditionals for Tops10/20. GB 21-Jan-1983
! 3-003 - Fix EDT$$FMT_STR and EDT$$FMT_STRCNT. CJG 22-Mar-1983
! 3-004 - Fix arguments to FND_BUF - it takes a byte pointer. CJG 24-Mar-1983
! 3-005 - Remove RHB code. CJG 19-Apr-1983
! 3-006 - Add updates from V3 sources. GB 29-Apr-1983
! 3-007 - Fix call to EDT$$FMT_STRCNT. CJG 6-Jun-1983
! 3-008 - Remove call to EDT$$CALLFIO. CJG 10-Jun-1983
! 3-009 - Change the way that filespecs are handled. CJG 23-Jun-1983
!--
!<BLF/PAGE>
%SBTTL 'Declarations'
!
! TABLE OF CONTENTS:
!
REQUIRE 'EDTSRC:TRAROUNAM';
FORWARD ROUTINE
WRITE_FILE, ! Write an output file
EDT$$EXI_CMD : NOVALUE, ! Process the EXIT command
EDT$$WR_CMD : NOVALUE; ! Process the WRITE command
!
! INCLUDE FILES:
!
REQUIRE 'EDTSRC:EDTREQ';
!
! MACROS:
!
! NONE
!
! EQUATED SYMBOLS:
!
EXTERNAL LITERAL
EDT$M_NOOUTPUT,
EDT$K_WRITE_FILE,
EDT$K_OUTPUT_FILE,
EDT$K_OPEN_OUTPUT_SEQ,
EDT$K_OPEN_OUTPUT_NOSEQ,
EDT$K_PUT,
EDT$K_CLOSE,
EDT$K_CLOSE_DEL;
!
! OWN STORAGE:
!
! NONE
!
! EXTERNAL REFERENCES:
!
! In the routines
!<BLF/PAGE>
%SBTTL 'WRITE_FILE - write on a file'
ROUTINE WRITE_FILE ( ! Write on a file
RANGE, ! Range to write
CHECK, ! Do consistency checking
FILE_DESC ! File descriptor to use
) =
!++
! FUNCTIONAL DESCRIPTION:
!
! This routine is used by the WRITE and EXIT commands to write
! an output file. The /SEQ switch determines whether sequence
! numbers should be written.
!
! FORMAL PARAMETERS:
!
! RANGE the range block for the range to be written.
!
! CHECK a flag indicating that the consistency check should be done
! (set if we are exiting, clear otherwise). Also permits defaulting
! of the file name to the output or input file name.
!
! FILE_DESC File descriptor to be used by FILEIO
!
! IMPLICIT INPUTS:
!
! EXITD
! OUT_NAM
! WRT_NAM
! INP_NAM
! OPTIONS
! CUR_BUF
! IO_VFCHD
! LNO_ZERO
! LNO0
! LNO_VFCMAX
! WK_LN
! SUMRY
! EXE_CURCMD
! EXE_SBITS
! EXE_SBLK
!
! IMPLICIT OUTPUTS:
!
! EXE_SBITS
! CC_DONE
!
! ROUTINE VALUE:
!
! 0 = no write took place
! 1 = file written successfully
!
! SIDE EFFECTS:
!
! Types an error message if the file is not properly written.
! If the consistency check fails, arranges to save the journal file.
!
!--
BEGIN
EXTERNAL ROUTINE
EDT$FILEIO, ! Calls general file routine
EDT$$SC_SETWID, ! Reset terminal width
EDT$$SC_POSCSIF, ! Absolute cursor positioninn
EDT$$STOP_WKINGMSG, ! Stop working message
EDT$$CHK_CC, ! check for CONTROL/C typed
EDT$$LDIV,
EDT$$FMT_CH,
EDT$$FMT_STRCNT : NOVALUE,
EDT$$FMT_CRLF, ! Terminate an output line
EDT$$FMT_MSG,
EDT$$NXT_LNRNG,
EDT$$RNG_REPOS,
EDT$$CMP_LNO,
EDT$$FIOPN_ERR,
EDT$$FMT_STR;
EXTERNAL
TI_WID,
ABT_WRITE,
SAV_TIWID,
MESSAGE_LINE,
IO_FNAM,
EXT_MOD,
EXITD,
INP_NAM,
RNG_FRSTLN,
RNG_ORIGPOS : POS_BLOCK,
OPTIONS : BITVECTOR [36], ! bit 3 = /NOOUTPUT
CUR_BUF : REF TBCB_BLOCK,
IO_VFCHD,
LNO_ZERO : LN_BLOCK,
LNO_VFCMAX : LN_BLOCK, ! Value 6.5535 * (10**9)
LNO0 : LNOVECTOR [14], ! powers of ten
SUMRY, ! flag indicating whether to type out summary
EOB_LN,
WK_LN : REF LIN_BLOCK,
EXE_CURCMD : REF NODE_BLOCK, ! Pointer to the current command.
EXE_SBITS, ! The options switches.
EXE_SBLK : REF NODE_BLOCK, ! The option switch value block.
CC_DONE; ! Set to 1 if control C actually aborts something
MESSAGES ((NOFILSPC, NOFILWRT, CONCHKFLD, ERROUTFIL, WRIFILCRE, OUTFILCRE, SEQNUMOV, SEQINCROV, OUTFILCLO,
WRIFILCLO));
LOCAL
CLOSEMSG, ! File close message
OUTPUTMSG, ! Output error message
OPNMSG, ! File open message
FILECODE, ! code for what kind of open
FILESTRM, ! code for which kind of file
REC_DESC : BLOCK [1], ! Descriptor for record
STAT_DESC : BLOCK [8], ! descriptor for puts
STATUS, ! Status of open or close attempt
L_COUNT : LN_BLOCK, ! Number of lines written.
C_COUNT, ! Number of characters written
REC_ADDR,
REC_LEN,
DIGIT, ! Holds integer result from division
LINNO : LN_BLOCK, ! 48-bit line number
SEQ, ! Flag indicating sequenced
SEQ_NUM, ! Current sequence number
SEQ_INCR; ! Sequence number increment
MAP
FILE_DESC : REF BLOCK;
!+
! Position to the front of the range.
!-
RNG_FRSTLN = 1;
EDT$$CPY_MEM (POS_SIZE, .CUR_BUF, RNG_ORIGPOS);
IF ( NOT EDT$$RNG_REPOS (.RANGE)) THEN RETURN (0);
!+
! If this is a WRITE command, then the filespec must be with the command.
!
! If this is an EXIT command, then the filespec may be with the command, or
! it may have been provided in the /OUTPUT switch, or it may be defaulted
! from the input file spec.
!
! If a filespec is provided with the EXIT command, then this will be used
! with any defaults coming from the input or /OUTPUT filespecs.
!
! If /READONLY was given in the original command line, and there is no filespec
! with the EXIT command, then there is nothing to do.
IF (.EXE_CURCMD [FSPCLEN] EQL 0)
THEN
IF ((.CHECK EQL 0) OR ((.OPTIONS AND EDT$M_NOOUTPUT) NEQ 0))
THEN
BEGIN
EDT$$FMT_MSG (EDT$_NOFILSPC);
RETURN (0);
END;
!+
! Check for the /SEQ option.
!-
IF (SEQ = .EXE_SBITS<OPB_SEQ>)
THEN
BEGIN
!+
! Determine the actual sequence start and increment by reducing them by 10**5
!-
SEQ_NUM = 0;
SEQ_INCR = 0;
MOVELINE (EXE_SBLK [SW_VAL1], LINNO); ! Starting Value
!+
! Error checks for sequence number and increment (must be less than 65536)
!-
IF (EDT$$CMP_LNO (LINNO, LNO_VFCMAX) GTR 0)
THEN
BEGIN
EDT$$FMT_MSG (EDT$_SEQNUMOV);
RETURN (0)
END;
DECR I FROM 9 TO 5 DO
BEGIN
SEQ_NUM = .SEQ_NUM*10;
EDT$$LDIV (LINNO, DIGIT, .I);
SEQ_NUM = .SEQ_NUM + .DIGIT;
END;
MOVELINE (EXE_SBLK [SW_VAL2], LINNO); ! Increment
IF (EDT$$CMP_LNO (LINNO, LNO_VFCMAX) GTR 0)
THEN
BEGIN
EDT$$FMT_MSG (EDT$_SEQINCROV);
RETURN (0)
END;
DECR I FROM 9 TO 5 DO
BEGIN
SEQ_INCR = .SEQ_INCR*10;
EDT$$LDIV (LINNO, DIGIT, .I);
SEQ_INCR = .SEQ_INCR + .DIGIT;
END
END;
!+
! Try to open the file and set up file specific messages
!-
IF (.CHECK EQL 0)
THEN
BEGIN
FILESTRM = EDT$K_WRITE_FILE;
CLOSEMSG = EDT$_WRIFILCLO;
OPNMSG = EDT$_WRIFILCRE;
END
ELSE
BEGIN
FILESTRM = EDT$K_OUTPUT_FILE;
OUTPUTMSG = EDT$_ERROUTFIL;
CLOSEMSG = EDT$_OUTFILCLO;
OPNMSG = EDT$_OUTFILCRE;
END;
IF (.SEQ NEQ 0) THEN
FILECODE = EDT$K_OPEN_OUTPUT_SEQ
ELSE
FILECODE = EDT$K_OPEN_OUTPUT_NOSEQ;
STATUS = EDT$FILEIO (.FILECODE, .FILESTRM, 0);
IF .STATUS
THEN
BEGIN
MOVELINE (LNO_ZERO, L_COUNT);
C_COUNT = 0;
ABT_WRITE = 0;
WHILE (EDT$$NXT_LNRNG (0) AND (.WK_LN NEQA EOB_LN)) DO
BEGIN
!+
! Check for a CONTROL/C.If one has been typed exit and delete the
! temporary file.
!-
IF (EDT$$CHK_CC ())
THEN
BEGIN
STATUS = EDT$FILEIO (EDT$K_CLOSE_DEL, .FILESTRM, 0);
IF ( NOT .STATUS) THEN EDT$$FIOPN_ERR (.CLOSEMSG, FILE_DESC);
RETURN (0);
END;
!+
! Set up the RHB if /SEQ was used.
!-
IF (.SEQ NEQ 0)
THEN
IF (.EXE_SBLK [SEQ_VAL] EQL 0) !
THEN
!+
! If no sequence start was given, then use the buffer's current line
! numbers in the VFC field (/SEQ )
!-
BEGIN
MOVELINE (WK_LN [LIN_NUM], LINNO);
DECR I FROM 14 TO 10 DO
WHILE (EDT$$CMP_LNO (LINNO, LNO0 [.I]) GEQ 0) DO
SUBLINE (LNO0 [.I], LINNO, LINNO);
IF (EDT$$CMP_LNO (LINNO, LNO_VFCMAX) GEQ 0)
THEN
IO_VFCHD = 65535
ELSE
BEGIN
!+
! Set up sequence numbers, but first divide by 10**5
!-
IO_VFCHD = 0;
DECR I FROM 9 TO 5 DO
BEGIN
IO_VFCHD = .IO_VFCHD*10;
EDT$$LDIV (LINNO, DIGIT, .I);
IO_VFCHD = .IO_VFCHD + .DIGIT;
END
END
END
ELSE
!+
! Otherwise, use the given sequence start and increment (/SEQ:st:inc)
!-
BEGIN
IO_VFCHD = .SEQ_NUM;
SEQ_NUM = .SEQ_NUM + .SEQ_INCR;
IF (.SEQ_NUM EQL 65535) THEN SEQ_INCR = 0;
END;
!+
! Write a line to the file.
!-
REC_ADDR = WK_LN [LIN_TEXT];
REC_LEN = .WK_LN [LIN_LENGTH];
STRING_DESC (REC_DESC, REC_LEN, .REC_ADDR);
IF ( NOT EDT$FILEIO (EDT$K_PUT, .FILESTRM, REC_DESC))
THEN
BEGIN
EDT$$FIOPN_ERR (.OUTPUTMSG, .FILE_DESC);
STATUS = EDT$FILEIO (EDT$K_CLOSE, .FILESTRM, 0);
IF ( NOT .STATUS) THEN EDT$$FIOPN_ERR (.CLOSEMSG, FILE_DESC);
RETURN (0);
END;
!+
! Count lines and characters for consistency check.
!-
ADDLINE (LNO0 [0], L_COUNT, L_COUNT);
C_COUNT = .C_COUNT + .WK_LN [LIN_LENGTH];
END;
!+
! Do the consistency check.
!-
IF .ABT_WRITE
THEN
BEGIN
STATUS = EDT$FILEIO (EDT$K_CLOSE_DEL, .FILESTRM, 0);
IF ( NOT .STATUS) THEN EDT$$FIOPN_ERR (.CLOSEMSG, FILE_DESC);
EDT$$FMT_MSG (EDT$_NOFILWRT);
EXITD = 0;
RETURN (0);
END;
IF (.CHECK NEQ 0)
THEN
IF ((EDT$$CMP_LNO (L_COUNT, CUR_BUF [TBCB_LINE_COUNT]) NEQ 0) OR !
(.C_COUNT NEQ .CUR_BUF [TBCB_CHAR_COUNT]))
THEN
BEGIN
EDT$$FMT_MSG (EDT$_CONCHKFLD);
EXE_SBITS = (.EXE_SBITS OR OPT_SAVE);
END;
!+
! Close the output file and print a message giving number of lines written
! to the file.
!-
IF (.EXT_MOD) THEN EDT$$STOP_WKINGMSG ();
STATUS = EDT$FILEIO (EDT$K_CLOSE, .FILESTRM, 0);
IF .STATUS
THEN
BEGIN
!+
! Reset the scrren width on exit if necessary. If the screen was reset, then
! reposition the cursor at the bottom of the screen.
!-
IF (.CHECK NEQ 0)
THEN
IF (.TI_WID NEQ .SAV_TIWID)
THEN
BEGIN
EDT$$SC_SETWID (.SAV_TIWID);
EDT$$SC_POSCSIF (.MESSAGE_LINE, 0);
END;
IF (.SUMRY EQL 1)
THEN
BEGIN
!+
! Extract the resultant filename of the opened file and format
! it to write out if the summary flag is set.
!-
EDT$$FMT_STR (CH$PTR (.FILE_DESC [DSC$A_POINTER]),
.FILE_DESC [DSC$W_LENGTH]);
EDT$$FMT_CH (%C' ');
EDT$$FMT_STRCNT (L_COUNT, CH$PTR (UPLIT (' line')), 5);
EDT$$FMT_CRLF ()
END;
RETURN (1);
END
ELSE
BEGIN
!+
! File was not closed, output error message.
!-
EDT$$FIOPN_ERR (.CLOSEMSG, FILE_DESC);
RETURN (0);
END;
END
ELSE
BEGIN
!+
! File was not created, output error message.
!-
EDT$$FIOPN_ERR (.OPNMSG, FILE_DESC);
RETURN (0);
END
END; ! of routine WRITE_FILE
!<BLF/PAGE>
%SBTTL 'EDT$$EXI_CMD - EXIT line-mode command'
GLOBAL ROUTINE EDT$$EXI_CMD ! EXIT line-mode command
: NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
!
! Command processing routine for exit. Switch to the main buffer,
! write the output file and set the EXITD flag
! if it succeeded.
!
! FORMAL PARAMETERS:
!
! NONE
!
! IMPLICIT INPUTS:
!
! RCOV_MOD
!
! IMPLICIT OUTPUTS:
!
! EXITD
!
! ROUTINE VALUE:
!
! NONE
!
! SIDE EFFECTS:
!
! NONE
!
!--
BEGIN
EXTERNAL ROUTINE
EDT$$FND_BUF;
EXTERNAL
OUT_NAM : BLOCK,
EXITD,
RCOV_MOD;
LOCAL
RANGE : NODE_BLOCK;
!+
! Ignore the EXIT command encountered during recovery.
!-
IF .RCOV_MOD THEN RETURN;
!+
! Setup the range as WHOLE.
!-
RANGE [NODE_TYPE] = RANGE_NODE;
RANGE [RAN_TYPE] = RAN_WHOLE;
RANGE [PREV_RANGE] = 0;
!+
! Position into the MAIN buffer.
!-
EDT$$FND_BUF (CH$PTR (UPLIT ('MAIN')), 4);
!+
! Attempt to write the file, and set the EXITED flag if it succeeds.
!-
EXITD = WRITE_FILE (RANGE, 1, OUT_NAM);
END; ! of routine EDT$$EXI_CMD
!<BLF/PAGE>
%SBTTL 'EDT$$WR_CMD - WRITE line-mode command'
GLOBAL ROUTINE EDT$$WR_CMD ! WRITE line-mode command
: NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
!
! Command processing routine for the write command. Look at the current range;
! if it is null, use the whole buffer. Then write the file.
!
! FORMAL PARAMETERS:
!
! NONE
!
! IMPLICIT INPUTS:
!
! RNG_ORIGPOS
! EXE_CURCMD
!
! IMPLICIT OUTPUTS:
!
! CUR_BUF
!
! ROUTINE VALUE:
!
! NONE
!
! SIDE EFFECTS:
!
! NONE
!
!--
BEGIN
EXTERNAL ROUTINE
EDT$$RD_CURLN;
EXTERNAL
WRT_NAM : BLOCK,
CUR_BUF : REF TBCB_BLOCK,
RNG_ORIGPOS : POS_BLOCK,
EXE_CURCMD : REF NODE_BLOCK; ! Pointer to the current command.
LOCAL
SAV_BUF, ! address of original buffer
RANGE : REF NODE_BLOCK;
!+
! Save the original position and default to whole range is not specified.
!-
SAV_BUF = .CUR_BUF; ! save original address
RANGE = .EXE_CURCMD [RANGE1];
IF (.RANGE [RAN_TYPE] EQL RAN_NULL) THEN RANGE [RAN_TYPE] = RAN_WHOLE;
WRITE_FILE (.RANGE, 0, WRT_NAM);
!+
! Reposition to the original line.
!-
CUR_BUF = .SAV_BUF; ! first get the buffer address
EDT$$CPY_MEM (POS_SIZE, RNG_ORIGPOS, .CUR_BUF);
EDT$$RD_CURLN (); ! do the positioning
END; ! of routine EDT$$WR_CMD
END ! of module EDT$LWRITE
ELUDOM