Google
 

Trailing-Edge - PDP-10 Archives - bb-r775e-bm_tops20_ks_upd_5 - sources/edt/tiline.bli
There are 10 other files named tiline.bli in the archive. Click here to see a list.
 %TITLE 'TILINE - read a command line'
MODULE TILINE (				! Read a command line
		IDENT = '3-004'			! File: TILINE.BLI Edit: CJG3004
		) =
BEGIN
!
!			  COPYRIGHT (c) 1981, 1985 BY
!	      DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
!		ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND  COPIED
! ONLY  IN  ACCORDANCE  WITH  THE  TERMS  OF  SUCH  LICENSE AND WITH THE
! INCLUSION OF THE ABOVE COPYRIGHT NOTICE.  THIS SOFTWARE OR  ANY  OTHER
! COPIES  THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
! OTHER PERSON.  NO TITLE TO AND OWNERSHIP OF  THE  SOFTWARE  IS  HEREBY
! TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE  WITHOUT  NOTICE
! AND  SHOULD  NOT  BE  CONSTRUED  AS  A COMMITMENT BY DIGITAL EQUIPMENT
! CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR  RELIABILITY  OF  ITS
! SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
!

!++
! FACILITY:	EDT -- The DEC Standard Editor
!
! ABSTRACT:
!
!	Read a command line.
!
! ENVIRONMENT:	Runs at any access mode - AST reentrant
!
! AUTHOR: Bob Kushlis, CREATION DATE: June 9, 1979
!
! MODIFIED BY:
!
! 1-001	- Original.  DJS 18-FEB-1981.  This module was created by
!	extracting routine EDT$$TI_RDCMDLN  from module TINPUT.
! 1-002	- Regularize headers.  JBS 11-Mar-1981
! 1-003	- Add return value for end of journal file.  JBS 02-Oct-1981
! 1-004 - Add an alternate terminator. STS 21-Oct-1981
! 1-005 - Fix parameter pass to/from char. translator.  SMB 27-Oct-1981
! 1-006	- Set a flag if control C actually aborted something.  JBS 24-May-1982
! 1-007 - Remove a reference to TI_STARTECHO.  SMB 22-Jun-1982
! 1-008	- Allow for 8-bit keyboards.  JBS 17-Aug-1982
! 1-009	- Add SS3 for 8-bit terminals.  JBS 20-Aug-1982
! 1-010 - Add a special test for "Delete" as a terminator.  SMB 23-Aug-1982
! 1-011	- Don't write into a formal parameter.  JBS 24-Aug-1982
! 1-012	- Fix a bug in edit 1-011.  JBS 25-Aug-1982
! 1-013	- Don't modify EDT$$G_PRV_COL; it is being maintained.  JBS 05-Oct-1982
! 1-014	- Add a conditional for VT220 support.  JBS 11-Feb-1983
! 3-001 - Fix various string pointers that were not string pointers.  GB  23-Mar-1983
! 3-003 - Fix a problem handling excess deletes in a command. CJG 8-Jul-1983
! 3-004 - Remove VT220 conditionals. CJG 25-Nov-1983
!--

%SBTTL 'Declarations'
!
! TABLE OF CONTENTS:
!

REQUIRE 'EDTSRC:TRAROUNAM';

FORWARD ROUTINE
    EDT$$TI_RDCMDLN;

!
! INCLUDE FILES:
!

REQUIRE 'EDTSRC:EDTREQ';

!
! MACROS:
!
!	NONE
!
! EQUATED SYMBOLS:
!
!	NONE
!
! OWN STORAGE:
!
!	NONE
!
! EXTERNAL REFERENCES:
!
!	In the routine
%SBTTL 'EDT$$TI_RDCMDLN  - read a command line'

GLOBAL ROUTINE EDT$$TI_RDCMDLN (		! read a command line
    C, 						! First character (already read)
    COM_BUF, 					! Command buffer
    END_COM, 					! Receives address of end of line
    TERM, 					! Character to terminate on
    RES_TERM					! resultant terminator
    ) =

!++
! FUNCTIONAL DESCRIPTION:
!
!	Read characters up to a terminator into the command buffer.  The
!	characters are echoed as they are read.  Delete is handled and
!	CTRL/U aborts the operation.
!
! FORMAL PARAMETERS:
!
!  C 			The first character to be handled (it was read previously)
!
!  COM_BUF		Pointer into the command buffer where the characters should
!			be placed.
!
!  END_COM		A character pointer to receive the pointer after the characters
!			have been read.
!
!  TERM			A special terminator.  (escape is always a terminator)
!
!  RES_TERM		The actual terminator.
!
! IMPLICIT INPUTS:
!
!	CMD_BUF
!	TIN_ECHOPOS
!
! IMPLICIT OUTPUTS:
!
!	TIN_ECHOFLG
!	CC_DONE
!
! ROUTINE VALUE:
!
!	1 = the string was read,
!	0 = aborted by CTRL/U or CTRL/C
!	2 = end of journal file
!
! SIDE EFFECTS:
!
!	NONE
!
!--

    BEGIN

    EXTERNAL ROUTINE
	EDT$$ERA_MSGLN,
	EDT$$CHK_CC,
	EDT$$TRN_KPADK,
	EDT$$TI_INPCH,
	EDT$$TI_DELK : NOVALUE,
	EDT$$TI_ECHOCH : NOVALUE;

    EXTERNAL
	CMD_BUF,			! Command line buffer
	TIN_ECHOFLG,			! Flag indicating character have been echoed
	TIN_ECHOPOS,			! Position on the echo line
	CC_DONE;			! Set to 1 if control C actually aborts something

    LOCAL
	COM_POINT,
	KEY,
	CH;

    COM_POINT = .COM_BUF;
!+
! Use C as the first character.
!-
    CH = .C;

!+
! If the terminator can be any character, then return immediately
! upon seeing the delete character.
!-

    IF (.TERM EQL ASC_K_DEL) THEN RETURN (1);

    WHILE 1 DO
	BEGIN

	SELECTONE .CH OF
	    SET

	    [ASC_K_DEL] :
!+
! Delete character, delete the previous character if there is one.
!-

		IF CH$PTR_NEQ (.COM_POINT, .COM_BUF)
		THEN
		    BEGIN
		    COM_POINT = CH$PLUS (.COM_POINT, -1);
		    EDT$$TI_DELK (CH$RCHAR (.COM_POINT));
		    END;

	    [ASC_K_ESC, ASC_K_CSI, ASC_K_SS3] :

!+
! Escape, CSI or SS3, terminate the read and gobble up the rest of the escape
! or control sequence.
!-

		BEGIN

		IF (EDT$$TRN_KPADK (KEY) EQL 0) THEN RETURN (2);

		.RES_TERM = .KEY;
		EXITLOOP;
		END;

	    [.TERM] :
!+
! The special terminator, end the read.
!-
		BEGIN
		.RES_TERM = .TERM;
		EXITLOOP;
		END;

	    [ASC_K_CTRL_U] :
!+
! Abort the read operation, erasing the echo line.
!-
		BEGIN
		TIN_ECHOFLG = 1;
		.END_COM = .COM_BUF;
		EDT$$ERA_MSGLN ();
		RETURN (0);
		END;

	    [OTHERWISE] :
!+
! Place the character in the buffer.
!-

		IF CH$PTR_NEQ (.COM_POINT, CH$PLUS (.COM_BUF, 256))
		THEN
		    BEGIN
		    CH$WCHAR_A (.CH, COM_POINT);
		    EDT$$TI_ECHOCH (.CH);
		    END;

	    TES;

!+
! Check for a control C as abort the read.
!-

	IF EDT$$CHK_CC ()
	THEN
	    BEGIN
	    .END_COM = .COM_BUF;
	    CC_DONE = 1;
	    RETURN (0);
	    END;

	IF (EDT$$TI_INPCH (CH) EQL 0) THEN RETURN (2);

	END;

!+
! Return a pointer one character beyond the last one read.
!-
    .END_COM = .COM_POINT;
    RETURN (1);
    END;					! of routine EDT$$TI_RDCMDLN


END
ELUDOM