Trailing-Edge
-
PDP-10 Archives
-
cuspjul86upd_bb-jf24a-bb
-
10,7/decmai/mx/mxerr.bli
There are 7 other files named mxerr.bli in the archive. Click here to see a list.
MODULE MXERR =
BEGIN
!
! COPYRIGHT (c) 1985 BY
! DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
! ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
! INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
! COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
! OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
! TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
! AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
! CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
! SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
!
!++
! FACILITY: MX's error handling routines
!
! ABSTRACT:
!
! This module contains the MX$ERROR_ROUTINE which is called by the $ERROR
! macro. In addition, the global error table, MXERRS, is defined in this
! module by the $ERROR_TABLE macro. The error strings themselves are
! maintained in the file MXERR.REQ. See that file for further details...
!
! ENVIRONMENT: BLISS-36
!
! AUTHOR: Richard B. Waddington , CREATION DATE: 21-March-1985
!
! MODIFIED BY:
!
! , : VERSION
! 01 -
!--
!
! INCLUDE FILES:
!
%IF %SWITCHES(TOPS20) %THEN
LIBRARY 'monsym';
LIBRARY 'mxjlnk';
%FI
LIBRARY 'mxnlib';
LIBRARY 'mxlib';
!
! TABLE OF CONTENTS:
!
FORWARD ROUTINE
mx$error_processor, !The main error processing routine.
mx$build_error_message, !Format an error string using NMU$TEXT.
log: NOVALUE, !Write an error string to the logfile.
link: NOVALUE; !Link an error string into the Message
! Table Entry.
!
! OWN STORAGE:
!
$error_table ;
!
! EXTERNAL REFERENCES:
!
EXTERNAL
logspc,
mxlogf,
mxlogm,
active_message_table;
EXTERNAL ROUTINE
mx$file_exists,
mx$file_routines,
mx$message_queue_routines,
nmu$text_manager,
nmu$sched_manager,
nmu$queue_manager,
nmu$memory_manager,
nmu$table_routines;
%global_routine ('MX$ERROR_PROCESSOR', signal_vector_) =
!++
! FUNCTIONAL DESCRIPTION:
!
! This routine performs error handling for MX. There are three classes
! of errors: PROTOCOL errors, MESSAGE errors, and INTERNAL errors. An
! error may have one of three severity levels: INFORMATIONAL, WARNING, and
! SEVERE. The following table outlines the action taken in each case:
!
! INFORMATIONAL WARNING SEVERE
! +------------------+------------------+-----------------------+
! PROTOCOL | Build an error string and log it in MX.LOG. Note that |
! | these errors should be filtered out by the server/spooler |
! | that detected the condition. They should never get to this |
! | routine. |
! +------------------+------------------+-----------------------+
! MESSAGE | Build an error string, and link it | Build an error string,|
! | into the Message Data Block. If | and link it into the |
! | the Canceled Bit is not set, then | Message Data Block. |
! | set the Restart Bit. | Set Canceled Bit, |
! | | clear Restart Bit in |
! | | Message Data Block, |
! +------------------+------------------+-----------------------+
! INTERNAL | Build an error string and log it in | Halt MX. |
! | MX.LOG | |
! +------------------+------------------+-----------------------+
!
! Error strings are built by making calls to the NMU$TEXT routine.
! Consequently, error strings may contain any directive supported by
! NMU$TEXT. If an error message from MXERRS contains a directive, then the
! call to this routine must include the data for the error message.
! Similarly, if an optional message is included, and it contains directives
! for NMU$TEXT, then the optional data must be included. For more details on
! message formats, see MXERR.REQ.
!
! This routine takes an argument block with the following format:
!
! SIGNAL_VECTOR: +---------------------------+ 0
! | Count |
! +---------------------------+ 1
! | Condition Code |
! +---------------------------+ 2
! | Message ID |
! +---------------------------+ 3
! | Optional message pointer |
! +---------------------------+ 4
! |Offset to optional msg data|
! +---------------------------+ 5
! \ Error message data \
! \ ... \
! \ \
! \ Optional message data \
! \ ... \
! +---------------------------+
!
! The message id is the index into the Active Message Table.
!
! The condition code format is the same as the one defined in the Bliss
! Language Guide section on Condition Handling, and it contains the Severity
! level ($INFO, $WARNING, $SEVERE) the error code (an index into MXERRS), and
! the Facility ($PROTOCOL, $MESSAGE, $INTERNAL). Note that the
! signal_vector is very similar to signal vectors used by the condition
! handling facilities of Bliss.
!
! FORMAL PARAMETERS:
!
! Signal_vector: The address of the argument block described above.
!
! IMPLICIT INPUTS:
!
! MXERRS: The global error message table.
!
! IMPLICIT OUTPUTS:
!
! NONE
!
! ROUTINE VALUE:
!
! NONE
!
! COMPLETION CODES:
!
! NONE
!
! SIDE EFFECTS:
!
! NONE
!
!--
BEGIN
BIND
sig = .signal_vector_: VECTOR,
cnt = sig[0],
cond = sig[1]: CONDITION_VALUE,
msg_id = sig[2],
err_opt_msg = sig[3],
offset_to_opt_data = .sig[4],
err_msg_data = sig[5]: VECTOR,
opt_msg_data = sig[offset_to_opt_data];
LOCAL
list_header,
len,
msg_data_block: REF message_table_entry,
err_msg;
len = mx$build_error_message(sig,err_msg);
log(.err_msg);
IF (.cond[STS$V_FAC_MX] EQL $internal) AND
(.cond[STS$V_SEVERITY] EQL $severe)
THEN
stop_program;
CASE .cond[STS$V_FAC_MX] FROM min_facility TO max_facility OF
SET
[$protocol,
$internal]: nmu$memory_release(.err_msg, CH$ALLOCATION(.len));
[$message]: BEGIN
nmu$table_fetch(
active_message_table,
.msg_id,
msg_data_block);
list_header = .msg_data_block[msg_err_list];
link(.err_msg, list_header);
msg_data_block[msg_err_list] = .list_header;
IF .msg_data_block[msg_state] EQL $msg_incomplete
THEN
RETURN -2;
IF .cond[STS$V_SEVERITY] EQL $severe
THEN
msg_data_block[msg_state] = $msg_canceled
ELSE
IF .msg_data_block[msg_state] NEQ $msg_canceled
THEN
msg_data_block[msg_state] = $msg_restart;
END;
TES;
RETURN 0;
END; !End of MX$ERROR_ROUTINE
%global_routine('MX$ERROR_HANDLER', SIG, MECH, ENBL) =
!++
! FUNCTIONAL DESCRIPTION:
!
! FORMAL PARAMETERS:
!
! NONE
!
! IMPLICIT INPUTS:
!
! NONE
!
! IMPLICIT OUTPUTS:
!
! NONE
!
! COMPLETION CODES:
!
!
! SIDE EFFECTS:
!
! NONE
!--
BEGIN
MAP
sig: REF VECTOR, ! signal vector
mech: REF VECTOR, ! mechanism vector
enbl: REF VECTOR; ! enable vector
BIND
cnt = sig[0],
cond = sig[1]: CONDITION_VALUE,
msg_id = sig[2],
err_opt_msg = sig[3],
offset_to_opt_data = .sig[4],
err_msg_data = sig[5]: VECTOR,
opt_msg_data = sig[offset_to_opt_data],
enbcnt = enbl[0],
hdr = .enbl[1]: REF ipcf_hdr,
msg = .enbl[2]: REF message_table_entry,
rec = .enbl[3]: REF ipcf_rec,
return_value = MECH
[
%BLISS16(1)
%BLISS36(1)
%BLISS32(3)
];
EXTERNAL LITERAL SS$UNW;
LOCAL
len,
err_msg;
IF sts$match(.cond, ss$unw)
THEN
RETURN 0;
len = mx$build_error_message(.sig,err_msg);
log(.err_msg);
nmu$memory_release(.err_msg, CH$ALLOCATION(.len));
return_value = 1;
CASE .cond[STS$V_FAC_MX] FROM min_facility TO max_facility OF
SET
[$protocol]: BEGIN
IF .msg EQL 0
THEN
SETUNWIND()
ELSE
BEGIN
IF .cond[STS$V_SEVERITY] EQL $err
THEN
BEGIN
SETUNWIND();
msg[msg_state] = $msg_canceled;
END
ELSE
IF .cond[STS$V_SEVERITY] EQL $severe
THEN
msg[msg_state] = $msg_canceled
ELSE
msg[msg_state] = $msg_warning;
END;
IF .enbcnt EQL 3
THEN
rec[rec_error] = .cond[STS$V_CODE];
END;
[$message]: $error( SEVERITY=$warning,
FACILITY=$internal,
CODE=er$mle);
[$internal]: mx$error_processor(.sig);
TES;
RETURN .return_value
END;
%global_routine ('MX$BUILD_ERROR_MESSAGE', signal_vector_, msg_) =
!++
! FUNCTIONAL DESCRIPTION:
!
! This routine builds the error message string from the error table
! (MXERRS) and the data in the signal vector. This message is then copied to
! dynamic storage, and its address is returned.
!
! FORMAL PARAMETERS:
!
! Signal_vector: The address of the argument block described above.
!
! Msg: The address to return the address of the message string
!
! IMPLICIT INPUTS:
!
! MXERRS: The global error message table.
!
! IMPLICIT OUTPUTS:
!
! NONE
!
! ROUTINE VALUE:
!
! The address of the formatted error message.
!
! COMPLETION CODES:
!
! NONE
!
! SIDE EFFECTS:
!
! NONE
!
!--
BEGIN
BIND
sig = .signal_vector_: VECTOR,
msg = .msg_,
cnt = sig[0],
cond = sig[1]: CONDITION_VALUE,
msg_id = sig[2],
err_opt_msg = sig[3],
offset_to_opt_data = .sig[4],
err_msg_data = sig[5]: VECTOR,
opt_msg_data = sig[offset_to_opt_data];
BIND
sev_err_msg_directive = CH$PTR(UPLIT(%ASCIZ %STRING('?MX %I'))),
sev_opt_msg_directive = CH$PTR(UPLIT(%ASCIZ %STRING('?MX %I (%I)'))),
sev_opt_m20_directive = CH$PTR(UPLIT(%ASCIZ %STRING('?MX %I (%J)'))),
wrn_err_msg_directive = CH$PTR(UPLIT(%ASCIZ %STRING('%%MX %I'))),
wrn_opt_msg_directive = CH$PTR(UPLIT(%ASCIZ %STRING('%%MX %I (%I)'))),
wrn_opt_m20_directive = CH$PTR(UPLIT(%ASCIZ %STRING('%%MX %I (%J)')));
LOCAL
len,
directive,
buf_ptr,
arg_cnt,
arglist: VECTOR[20];
STACKLOCAL
buf: VECTOR[CH$ALLOCATION(256)];
directive = (
IF .cond[STS$V_SEVERITY] EQL sts$k_severe
THEN
SELECTONE .err_opt_msg OF
SET
[0]: sev_err_msg_directive;
[$error_code]: %IF %SWITCHES(TOPS20) %THEN
(IF .opt_msg_data GEQ %O'600010'
THEN
sev_opt_m20_directive
ELSE
(opt_msg_data = .mxerrs[.opt_msg_data];
sev_opt_msg_directive ))
%ELSE
(opt_msg_data = .mxerrs[.opt_msg_data];
sev_opt_msg_directive) %FI;
[OTHERWISE]: sev_opt_msg_directive
TES
ELSE
SELECTONE .err_opt_msg OF
SET
[0]: wrn_err_msg_directive;
[$error_code]: %IF %SWITCHES(TOPS20) %THEN
(IF .opt_msg_data GEQ %O'600010'
THEN
wrn_opt_m20_directive
ELSE
(opt_msg_data = .mxerrs[.opt_msg_data];
wrn_opt_msg_directive ))
%ELSE
(opt_msg_data = .mxerrs[.opt_msg_data];
wrn_opt_msg_directive ) %FI;
[OTHERWISE]: wrn_opt_msg_directive
TES);
arglist[0] = .mxerrs[.cond[STS$V_CODE]];
arg_cnt = MIN(20, .cnt - 2);
INCR j FROM 1 TO .arg_cnt - 1 DO arglist[.j] = .err_msg_data[.j - 1];
buf_ptr = CH$PTR(buf);
len = nmu$text(buf_ptr, 256, .directive, .arg_cnt, arglist);
msg = nmu$memory_get(CH$ALLOCATION(.len));
CH$MOVE(.len, CH$PTR(buf), CH$PTR(.msg));
RETURN .len
END; !End of MX$BUILD_ERROR_MESSAGE
%global_routine ('log', err_msg): NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
!
! This routine takes an error message string and appends it to the log
! file (MX.LOG). NOTE--THIS ROUTINE IS NOT YET IMPLEMENTED. AT PRESENT IT
! ONLY DOES A PSOUT ON TOPS-20, OR A CALL TO TASK_INFO ON TOPS-10--NOTE
!
! FORMAL PARAMETERS:
!
! ERR_MSG: The address of the error message text string.
!
! IMPLICIT INPUTS:
!
! NONE
!
! IMPLICIT OUTPUTS:
!
! NONE
!
! ROUTINE VALUE:
!
! NONE
!
! COMPLETION CODES:
!
! NONE
!
! SIDE EFFECTS:
!
! NONE
!
!--
BEGIN
LOCAL
len,
ptr,
error;
STACKLOCAL
tbuf: VECTOR[CH$ALLOCATION(40)],
buf: VECTOR[CH$ALLOCATION(max_string_length)];
%IF %SWITCHES(TOPS20) %THEN
BEGIN
declare_jsys(odtim);
$$odtim(CH$PTR(tbuf),-1,0);
END;
%ELSE
udtdat(-1,tbuf);
%FI
ptr = CH$PTR(buf);
len = $nmu$text(ptr,max_string_length, '%A %A%/',
CH$PTR(tbuf),
CH$PTR(.err_msg)) - 1;
IF .mxlogf EQL 0
THEN
BEGIN
IF mx$file_exists(CH$PTR(logspc))
THEN
mxlogm = file_access_append_only
ELSE
mxlogm = file_access_write_only;
mxlogf = mx$file_open(CH$PTR(logspc), .mxlogm, error);
END;
mx$file_write(.mxlogf, CH$PTR(buf), .len, error);
mxlogm = -1;
END; !End of MX$ERROR_ROUTINE
%routine ('link', err_msg_, header_block_): NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
!
! This routine takes an error message string and links it into the
! message data block.
!
! FORMAL PARAMETERS:
!
! ERR_MSG: The address of the error message text string.
!
! HEADER_BLOCK: The address of the list header.
!
! IMPLICIT INPUTS:
!
! NONE
!
! IMPLICIT OUTPUTS:
!
! NONE
!
! ROUTINE VALUE:
!
! NONE
!
! COMPLETION CODES:
!
! NONE
!
! SIDE EFFECTS:
!
! NONE
!
!--
BEGIN
BIND
err_msg = .err_msg_,
header_block = .header_block_;
LOCAL
oldblk: REF list_blk,
newblk: REF list_blk;
newblk = mx$get_list_blk;
newblk[lst_data] = err_msg;
newblk[lst_next] = 0;
IF .header_block EQL 0
THEN
header_block = .newblk
ELSE
BEGIN
oldblk = .header_block;
WHILE .oldblk[lst_next] NEQ 0 DO oldblk = .oldblk[lst_next];
oldblk[lst_next] = .newblk;
END;
END; !End of MX$ERROR_ROUTINE
END !End of module
ELUDOM