Trailing-Edge
-
PDP-10 Archives
-
custsupcuspmar86_bb-x130b-sb
-
fsxkon.mac
There are 11 other files named fsxkon.mac in the archive. Click here to see a list.
TITLE FSXKON - RS04 (FAST SWAPPING DISK) DRIVER V042
SUBTTL T WACHS/TW/JBS 10 SEP 85
SEARCH F,S
$RELOC
$HIGH
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
.CPYRT<1973,1986>
;COPYRIGHT (C) 1973,1974,1975,1976,1977,1978,1979,1980,1982,1984,1986
;BY DIGITAL EQUIPMENT CORP., MAYNARD, MASS.
;ALL RIGHTS RESERVED.
;
XP VFXKON,042
;ASSEMBLY INSTRUCTIONS - FSXKON,FSXKON/C_F,S,KONPAR,FSXKON
;INTERESTING DEFINITIONS:
;DATAO'S
LR==4000 ;LOAD REGISTER
DODA==050000 ;DESIRED ADDRESS
DOLA==070000 ;LOOK-AHEAD REGISTER (SECTOR COUNTER)
DOCR==400000 ;CONTROL REGISTER
DOER==020000 ;ERROR REGISTER
DODB==500000 ;DATA BUFFER REGISTER
DORA==540000 ;REGISTER ACCESS ERROR
;DATAI BITS
DIERRS==003600
CBTO==2000 ;CONTROL BUS TIME OUT
DCK==100000 ;DATA CHECK BIT IN ERROR REGISTER
;CONI/CONO BITS
CHNPAR==6 ;(LH) CHAN-DETECTED PARITY ERR
CHNNXM==1 ;(LH) CHAN-DETECTED NXM
CHANER==120000 ;CHAN ERR OR OVERRUN
OVERUN==20000
ALLERR==736360 ;ALL CONI ERR BITS (RH)
ILC==4000 ;ILLEGAL COMMAND (ILFNC OR SDRAE)
DRVERR==600,,436300 ;DRIVE OR CONTROLLER ERROR
DONBIT==10 ;DONE
STPBIT==20 ;STOP THE UNIT BIT (CONO)
BSYBIT==20 ;BUSY
ILFC==400 ;ILLEGAL FUNCTION
SDRAE==200 ;SELECTED DRIVE REG ACCESS ERROR (LH)
CI.PWF==2000 ;CONI FOR POWERFAIL
CO.MBI==2000 ;CONO FOR POWERFAIL
FSALCL==:734200 ;CLEAR ALL ERRORS
;DATAO BITS
DXES==200000 ;DISABLE STOP ON ERROR
FNCCLR==11 ;DRIVE CLEAR
FNCRED==71
FNCWRT==61
DEFINE STALL,<
XLIST
IFN FTKL10,<
IMULI P,1
IMULI P,1
>
LIST
>
ENTRY FSXKON
FSXKON::
FSXRDF::
FSXRDC::
FSXRED::SKIPA T1,[FNCRED] ;READ
FSXWTF::
FSXWTC::
FSXWRT::MOVEI T1,FNCWRT ;WRITE
TRO T1,DXES ;DISABLE STOP ON ERR
JRST FSXGO
FSXRDS::SKIPA T1,[FNCRED] ;READ
FSXWTS::MOVEI T1,FNCWRT ;WRITE
FSXGO: XCT FSXCI2##(J) ;CONI FSN,T2
TLNN T2,ILFC
TRNE T2,ALLERR-ILC ;ANY ERROR (INCLUDING BUSY)?
JRST NOSTR2 ;YES, YOU LOSE
TLNN T2,SDRAE ;REG ACCESS ERR?
JRST FSXGO1 ;NO
LDB T3,UNYPUN## ;YES, GET UNIT
MOVEI T4,1 ;POSITION A BIT FOR CONTROLLER DATAO
LSH T4,(T3)
MOVSI T3,LR(T3) ;SELECT DRIVE CNTRL REG
HRRI T3,FNCCLR ;CLEAR THE DRIVE
XCT FSXDO3##(J) ;ZAP!
MOVSI T3,DORA+LR ;SET TO CLEAR RAE IN CONTROLLER
HRR T3,T4 ;WHICH BIT
XCT FSXDO3##(J) ;ZAP
FSXGO1: LDB T2,UNYPUN## ;NO, GET UNIT
MOVE T3,UNIBLK##(U) ;DESIRED BLOCK
LSH T3,1 ;*2=SECTOR
HRLI T3,DODA+LR(T2) ;SET TO DATAO DESIRED ADDRESS
XCT FSXDO3##(J) ;SET DESIRED BLOCK
STALL
XCT FSXDI3##(J) ;READ STATUS
TLNE T3,DIERRS ;DRIVE OK?
JRST NOSTRT ;NO, YOU LOSE
MOVE T3,KONIOC##(J) ;YES, GET ICWA
LSH T3,6 ;POSITION IT
TRO T3,(T1) ;+ FUNCTION
HRLI T3,DOCR+LR(T2) ;DATAO CONTROL REGISTER
MOVEM T3,FSXFNC##(J) ;SAVE FUNCTION
MOVEM T3,UNILAS##(U) ;SAVE LAST DATAO TO THE DRIVE
XCT FSXDO3##(J) ;START DRIVE GOING
LDB T4,KOYPI## ;SET PI IN RH10
XCT FSXCO4##(J) ;CONO FSN,(T4)
PJRST CPOPJ1## ;AND TAKE SKIP-RETURN
;HERE IF DRIVE ISN'T READY
NOSTRT: TLNN T3,CBTO ;DRIVE THERE?
NOSTR2: TDZA T1,T1 ;YES
MOVEI T1,KOPOFL## ;NO
MOVSI T3,DOCR ;CNTRL REGISTER DATAI BITS
XCT FSXDO3##(J) ; RETURNED IN T3 ON UNIT NOT READY
STALL
XCT FSXDI3##(J)
XCT FSXCI2##(J) ;CONI BITS IN T2
POPJ P, ;NON-SKIP RETURN
FSXREG::PUSH P,U ;RDREG WIPES U
PUSHJ P,RDREG ;READ ALL DRIVE REGS
PJRST UPOPJ## ;RESTORE U AND RETURN
FSXPOS::STOPCD CPOPJ1##,DEBUG,RDP, ;++RS04 DOESNT POSITION
FSXUNL::
FSXERR::
FSXECC::STOPCD CPOPJ1##,DEBUG,RS04IF, ;++RS04 ISNT FANCY
FSXRCL::POPJ P, ;NO RECAL
FSXLTM::LDB T2,UNYPUN## ;UNIT NUMBER
MOVSI T3,DOLA+LR(T2) ;DATAO LOOK-AHEAD REGISTER
XCT FSXDO3##(J)
STALL
XCT FSXDI3##(J) ;READ STATUS
TLNE T3,DIERRS ;DRIVE OK?
POPJ P, ;NO, NON-SKIP
LDB T2,[POINT 6,T3,29] ;YES, GET SECTOR COUNTER
LSH T1,1 ;CONVERT TO BLOCK NUMBER
ANDI T1,77 ;STRIP NON-SECTOR STUFF FROM DESIRED BLOCK
SUBI T1,3(T2) ;FUDGE-FACTOR = 3 SECTORS
SKIPGE T1
ADDI T1,^D64 ;ADD 1 REVOLUTION IF NEGATIVE
IMULI T1,^D240 ;PER 64-WORD SECTOR
;IF WE WANT TO GET FANCY,
; CAN ADD THE WORD-TIMES IN TOO
; BUT ITS PROBABLY A BAD IDEA SINCE WILL
; NEVER EXACTLY GET A 0 TIME
; ADD T1,T3
PJRST CPOPJ1## ;TAKE GOOD RETURN
;HERE TO TRY AND STOP THE UNIT
FSXSTP::LDB T3,UNYPUN## ;UNIT NUMBER
MOVSI T3,DOER(T3) ;SET TO READ ERROR REG
XCT FSXDO3##(J) ;DATAO ERROR REGISTER
STALL
XCT FSXDI3##(J) ;(BEFORE) ERROR STATUS
XCT FSXCI2##(J) ;(BEFORE) CONI STATUS
PUSH P,T2 ;SAVE CONI STATUS
MOVEI T2,STPBIT ;TRY TO STOP DRIVE
XCT FSXCO2##(J) ;ZAP
XCT FSXCI2##(J)
TRNN T2,BSYBIT ;DID IT STOP?
AOS -1(P) ;YES, SKIP-RETURN
PJRST T2POPJ## ;RESTORE CONI STATUS AND RETURN
;HERE ON AN INTERRUPT
FSXINT::XCT FSXCI2##(J) ;READ STATUS
MOVSI T3,DOCR ;SET TO DATAO CONTROL REG
XCT FSXDO3##(J)
STALL
XCT FSXDI3##(J) ;READ CNTRL REG
MOVE T4,T3 ;SAVE IT
TLO T3,LR
XCT FSXCI2##(J) ;CONI FH'N,T2
TLNE T2,4000 ;22-BIT CHAN?
TLO T4,KOP22B## ;YES
MOVEI T1,0
CAME T3,FSXFNC##(J) ;RIGHT DATA IN CNTRL REG?
TRO T1,IODERR ;OOPS!
ANDI T3,77 ;GET FUNCTION
CAIN T3,FNCWRT ;WRITE?
TRO T1,OPWRT ;YES (OPRED=0)
MOVE T3,FSXFNC##(J) ;FUNCTION AGAIN
HLL T1,T3 ;UNIT TO T1
TLZ T1,777770 ;NO ATTENTIONS
TRNN T2,ALLERR ;ERROR?
JRST DISMIS ;NO
TDNE T2,[EXP DRVERR] ;YES, DRIVE/CONTROLLER ERROR?
TRO T1,IODERR ;YES
TRNN T2,CHANER ;CHAN ERR?
JRST DISMIS ;NO
TRNE T2,OVERUN ;YES, OVERRUN?
TRO T1,IOVRUN+IODERR ;YES
TLNE T2,CHNPAR ;CHAN ERR OR OVERRUN
TRO T1,IOCHMP+IODERR ;CORE PARITY ERROR
TLNE T2,CHNNXM
TRO T1,IOCHMP+IODERR ;MEMORY PARITY ERROR
DISMIS: MOVE U,KONCUA##(J) ;UNITDB
LDB T3,UNYPUN## ;SET TO READ ERROR REGISTER
MOVSI T3,DOER(T3)
XCT FSXDO3##(J) ;READ IT
STALL
XCT FSXDI3##(J)
TRNE T3,DCK ;DATA CHECK?
TRO T1,IODTER ;YES, LIGHT A BIT
HRL T3,T4 ;RETURN CNTRL REG,,ERROR REG DATAI'S
TRNE T1,IODERR!IODTER ;ERROR?
PUSHJ P,RDREG
TRNN T2,CI.PWF ;POWERFAIL BIT LIT ?
JRST FINSH1 ;NO, CONTINUE
MOVEI T4,CO.MBI ;YES, SETUP T4 FOR MASSBUS INIT
XCT FSXCO4##(J) ;DO THE INIT
FINSH1: MOVEI T4,FSALCL+DONBIT-ILC ;CLEAR ALL ERRORS AND DONE (LEAVE SDRAE)
XCT FSXCO4##(J)
LDB T4,UNYPUN## ;UNIT
MOVSI T4,LR(T4) ;SET TO CLEAR THE DRIVE
HRRI T4,FNCCLR
XCT FSXDO4##(J) ;ZAP
PJRST FILINT ;GO TELL FILSER
RDREG: PUSH P,F
PUSH P,T3
LDB T4,UNYPUN##
MOVE U,KONREG##(J)
MOVEI F,KONEBK##(J) ; AND SAVE IN KONTROLLER DB
ADDI F,-1(U)
ERRSUM: MOVSI T3,-1(U)
LSH T3,^D12 ;REGISTER NUMBER
TLO T3,(T4) ;DRIVE NO
XCT FSXDO3##(J)
STALL
XCT FSXDI3##(J) ;READ THE REGISTER
MOVEM T3,(F) ;SAVE
SUBI F,1
SOJG U,ERRSUM ;AND READ THE NEXT
MOVSI T3,DOCR ;READ RH10 CONTROL REG
XCT FSXDO3##(J)
XCT FSXDI3##(J)
MOVEM T3,KONECR##(J) ; AND STORE IN KDB
MOVSI T3,DODB ;READ DATA BUFFER
XCT FSXDO3##(J)
XCT FSXDI3##(J)
MOVEM T3,KONEDB##(J) ; AND STORE IN KDB
POP P,T3 ;RESTORE T3
MOVE U,KONCUA##(J) ;RESTORE U
JRST FPOPJ##
;HERE TO CHECK CAPACITY & STATUS OF RH10/RS04, RS05
FSXCPY::LDB T3,UNYPUN## ;UNIT NUMBER
MOVSI T3,060000(T3) ;SET TO DATAO DRIVE-TYPE REGISTER
XCT FSXDO3##(J)
STALL
XCT FSXDI3##(J) ;READ DRIVE TYPE (& STATUS)
TLNE T3,2000 ;CONTROL BUS TIMEOUT?
JRST FSXCP1 ;YES, THE UNIT ISNT THERE
ANDI T3,777 ;NO, GET UNIT TYPE
CAIE T3,2
CAIN T3,3 ;SOME FLAVOR OF RS04?
TDZA T4,T4 ;YES, OK. UNIT TYPE = RS04
JRST FSXCP1 ;NO, PRETEND ITS DOWN
XCT FSXCI2##(J) ;CONI
TLNE T2,4000 ;DF10 IN KI MODE?
TLO T4,KOP22B## ;YES, TELL FILSER
MOVEI T1,^D2048 ;BLOCKS PER UNIT
MOVE T2,T1 ;BLOCKS PER CYLINDER
SETZ T3, ;NO COMPATABILITY MODE
MOVE W,[^D32,,^D2048] ;BLKS PER TRK,,BLKS PER CYL
IFN FTDUAL,<
HRRZS J ;NO SERIAL NUMBER
>
PJRST CPOPJ1## ;TAKE GOOD RETURN
;HERE ON CONTROL BUS TIMEOUT
FSXCP1: MOVSI T4,KOPUHE## ;OFF LINE OR DOWN
TLO T4,KOPNSU## ;NO SUCH UNIT
POPJ P,
END